Move the NXP Kinetis KW4xZ watchdog initialization code to
z_arm_watchdog_init() and make it optional based on CONFIG_WDOG_INIT.
This brings the KW4xZ in line with the other NXP Kinetis series SoC
implementations.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Move the NXP Kinetis KL2x watchdog initialization code to
z_arm_watchdog_init() and make it optional based on
CONFIG_WDOG_INIT.
This brings the KL2x in line with the other NXP Kinetis series SoC
implementations.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
The driver for STM32's independent watchdog already exists and is
compatible with the stm32l1 SoC. Enable the independent watchdog
for the stm32l1 series for use with this driver.
Signed-off-by: Kwon Tae-young <tykwon@m2i.co.kr>
Instead of having TI_CCFG_PRESENT as a symbol that's only defined in
soc/arm/ti_simplelink/cc13x2_cc26x2/Kconfig.defconfig.series and y when
SOC_SERIES_CC13X2_CC26X2 is enabled, turn it into a helper symbol that's
selected by SOC_SERIES_CC13X2_CC26X2.
This avoids having a symbol that's only defined in a Kconfig.defconfig
file, which is confusing. It also makes things a bit more generic, in
case other boards with CCFGs are added.
Also rename it to HAS_TI_CCFG to be consistent with other helper
symbols, and add a help text.
Flagged by scripts/kconfig/lint.py.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Added delay before starting low frequency clock for the first time to
ensure that anomaly conditions are not met. Delay is configurable and
might be disabled.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This reverts commit 49bd19f3f2,
as the patch it contains is no longer needed after nrfx is updated
to version 2.1.0.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Update the hal_nordic module revision, to switch to nrfx 2.1.0.
Because the list of peripherals for nRF5340 has changed as follows:
- SPIM2 has been renamed to SPIM4
- SPIM2-3, SPIS2-3, TWIM2-3, TWIS2-3, and UARTE2-3 have been added
a couple of related corrections needed to be applied in dts and Kconfig
files, plus the spi_nrfx_spim driver has been extended with the support
for SPIM4.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
DesignWare driver can manage different amount of irqs so let's make it
configurable via DTS.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Remove soc/arm/st_stm32/stm32YY/flash_registers.h files.
Change register accesses in stm32 flash drivers to use FLASH_TypeDef
from modules/hal/stm32/stm32cube/stm32YYxx/soc/stm32xxxxxx.h.
Fixes#16235
Signed-off-by: Sarvesh Patkar <psarvesh314@gmail.com>
when DMA IP is enabled on stm32 series,
the heap size must be configured to large value
because of dma channels configuration.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Same deal as in commit 677f1e6 ("config: Turn pointless/confusing
'menuconfig's into 'config's"), for a newly-introduced stuff.
Also clean up headers to be consistent with recent cleanups.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
In zephyr_linker_sources().
This is done since the point of the location is to place things at given
offsets. This can only be done consistenly if the linker code is placed
into the _first_ section.
All uses of TEXT_START are replaced with ROM_START.
ROM_START is only supported in some arches, as some arches have several
custom sections before text. These don't currently have ROM_START or
TEXT_START available, but that could be added with a bit of refactoring
in their linker script.
No SORT_KEYs are changed.
This also fixes an error introduced when TEXT_START was added, where
TEXT_SECTION_OFFSET was applied to riscv's common linker.ld instead of
to openisa_rv32m1's specific linker.ld.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
CPU_CORTEX_M_HAS_DWT depends on
!CPU_CORTEX_M0 && !CPU_CORTEX_M0PLUS
, but SOC_SERIES_PSOC62 unconditionally selects it, even for
SOC_PSOC6_M0. This forces CPU_CORTEX_M_HAS_DWT on on Cortex-M0.
Fix it by moving the selects for CPU capabilities to the more specific
SOC_PSOC6_{M0,M4} symbols. This seems more readable than adding a
condition to the 'select CPU_CORTEX_M_HAS_DWT'.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
nrf52811_pca10056 board should enable nRF 802.15.4 radio driver
automatically when 802.15.4 subsystem is enabled, as other Nordic
802.15.4-compliant boards do.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Enable the RTC counter present in the NXP K6x SoC if CONFIG_COUNTER is
enabled. Add the needed dts fixup for the RTC device.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
CPU_CORTEX_M_HAS_SYSTICK and CPU_CORTEX_M_HAS_VTOR do not need
to be explicitely selected in SoC/Boards definitions of
platforms implementing the Cortex-M mainline architecture; they
are already selected by ARMV7_M_ARM8_M_MAINLINE Kconfig symbol.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The Data Watchpoint and Trace (DWT) is an optional debug unit
for the Cortex-M family cores (except ARMv6-M; i.e. M0 and M0+)
that provides watchpoints, data tracing and system profiling
capabilities. We select it for the ARM Cortex-M SoCs
- Beetle
- Musca A, Musca B
since it is present in these SoCs.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The Data Watchpoint and Trace (DWT) is an optional debug unit for the
Cortex-M family cores (except ARMv6-M; i.e. M0 and M0+) that provides
watchpoints, data tracing and system profiling capabilities.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The Data Watchpoint and Trace (DWT) is an optional debug unit for the
Cortex-M family cores (except ARMv6-M; i.e. M0 and M0+) that provides
watchpoints, data tracing and system profiling capabilities.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The Data Watchpoint and Trace (DWT) is an optional debug unit for the
Cortex-M family cores (except ARMv6-M; i.e. M0 and M0+) that provides
watchpoints, data tracing and system profiling capabilities.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The Data Watchpoint and Trace (DWT) is an optional debug unit for the
Cortex-M family cores (except ARMv6-M; i.e. M0 and M0+) that provides
watchpoints, data tracing and system profiling capabilities.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The Data Watchpoint and Trace (DWT) is an optional debug unit for the
Cortex-M family cores (except ARMv6-M; i.e. M0 and M0+) that provides
watchpoints, data tracing and system profiling capabilities.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The Data Watchpoint and Trace (DWT) is an optional debug unit for the
Cortex-M family cores (except ARMv6-M; i.e. M0 and M0+) that provides
watchpoints, data tracing and system profiling capabilities.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The Data Watchpoint and Trace (DWT) is an optional debug unit for the
Cortex-M family cores (except ARMv6-M; i.e. M0 and M0+) that provides
watchpoints, data tracing and system profiling capabilities.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The Data Watchpoint and Trace (DWT) is an optional debug unit for the
Cortex-M family cores (except ARMv6-M; i.e. M0 and M0+) that provides
watchpoints, data tracing and system profiling capabilities.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The Data Watchpoint and Trace (DWT) is an optional debug unit for the
Cortex-M family cores (except ARMv6-M; i.e. M0 and M0+) that provides
watchpoints, data tracing and system profiling capabilities.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The Data Watchpoint and Trace (DWT) is an optional debug unit for the
Cortex-M family cores (except ARMv6-M; i.e. M0 and M0+) that provides
watchpoints, data tracing and system profiling capabilities.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The Data Watchpoint and Trace (DWT) is an optional debug unit for the
Cortex-M family cores (except ARMv6-M; i.e. M0 and M0+) that provides
watchpoints, data tracing and system profiling capabilities.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The SoC, driver, and board support for the CC2650 and CC2650 Sensortag
aren't currently supported and we are removing them as such. If anyone
is interesting in supporting this platform we can easily recovery it
from git.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
generated_dts_board.h is pretty redundant and confusing as a name. Call
it devicetree.h instead.
dts.h would be another option, but DTS stands for "devicetree source"
and is the source code format, so it's a bit confusing too.
The replacement was done by grepping for 'generated_dts_board' and
'GENERATED_DTS_BOARD'.
Two build diagram and input-output SVG files were updated as well, along
with misc. documentation.
hal_ti, mcuboot, and ci-tools updates are included too, in the west.yml
update.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Enable the bandgap buffer on the NXP Kinetis K6x SoC series Power
Management Controller (PMC) if the internal temperature sensor is in
use.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Added dts additions for stm32 nucleo f767zi board, also added
and modified soc addtions for thet board.
Updated dts reference file name.
Updated yaml to take out adc for now.
Signed-off-by: Roland Ma <rolandma@yahoo.com>
Refactors the mcux wdog driver to use generated device tree macros
directly. Removes now unused dts fixup macros from kinetis socs.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Refactors the mcux rtc driver to use generated device tree macros
directly. Removes now unused dts fixup macros from kinetis socs.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Refactors the mcux dspi driver to use generated device tree macros
directly. Removes now unused dts fixup macros from kinetis socs.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Refactors the mcux lpsci driver to use generated device tree macros
directly. Removes now unused dts fixup macros from i.mx rt and kinetis
socs.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Refactors the mcux uart driver to use generated device tree macros
directly. Removes now unused dts fixup macros from kinetis socs.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Refactors the mcux lpi2c driver to use generated device tree macros
directly. Removes now unused dts fixup macros from kinetis socs.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The counter_basic_api test was broken for i.mx rt boards when we
refactored the mcux gpt driver to use generated device tree macros in
commit b8ad9969ef.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Refactors the mcux gpt driver to use generated device tree macros
directly. Removes now unused dts fixup macros from i.mx rt socs.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Refactors the mcux igpio driver to use generated device tree macros
directly. Removes now unused dts fixup macros from i.mx rt socs.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Refactors the mcux lpuart driver to use generated device tree macros
directly. Removes now unused dts fixup macros from i.mx rt and kinetis
socs.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Refactors the mcux lpi2c driver to use generated device tree macros
directly. Removes now unused dts fixup macros from i.mx rt and kinetis
socs.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adding Kconfig settings to warn anyone trying to build for this
platform of its pending deprecation in 2.2.0.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
Adding a Kconfig parameter so that we can indicate an SoC is to be
deprecated, similar to what is being done for BOARD_DEPRECATED_RELEASE.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
Enable the driver for the Timer/PWM (TPM) module present in the
OpenISA RV32M1 when PWM is enabled.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Add Kconfig option for indicating that a given SoC contains the
OpenISA RV32M1 Timer/PWM module (TPM).
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
This commit adds support for the on-board flash MX25R8035F that is
directly connected to the efr32fg soc.
Signed-off-by: Christian Taedcke <hacking@taedcke.com>
This commit adds support for the on-board flash MX25R8035F that is
directly connected to the efr32mg soc.
Signed-off-by: Christian Taedcke <hacking@taedcke.com>
This commit relocates the exception vector table address range
configuration routine that was previously implemented as part of
Cortex-R architecture reset function to SoC platform-specific
initialisation routine.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The SRAM address and size are currently available as both
DT_SRAM_{BASE_ADDRESS,SIZE} and as CONFIG_SRAM_{BASE_ADDRESS,SIZE} (via
the Kconfig preprocessor).
Use the CONFIG_SRAM_* versions everywhere, and remove generation of the
DT_SRAM_* versions from gen_defines.py.
The Kconfig symbols currently depend on 'ARC || ARM || NIOS2 || X86'.
Not sure why, so I removed it.
It looks like no configuration files set CONFIG_SRAM_* at the moment, so
another option might be to use the DT_* symbols everywhere instead. Some
Kconfig.defconfig.series files add defaults to them though.
Also improve the help texts for CONFIG_SRAM_* to say that they normally
come from devicetree rather than configuration files.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The Xilinx ZynqMP SoC embeds both Cortex-R "RPU" and Cortex-A "APU"
cores.
Since the current Zephyr architecture cannot support AMP of Cortex-R
and Cortex-A within the same project, the RPU and APU should be
considered separate platforms and handled accordingly.
This commit re-purposes the SOC_XILINX_ZYNQMP symbol as a helper symbol
indicating that Xilinx ZynqMP SoC is used, and adds a new symbol,
SOC_XILINX_ZYNQMP_RPU, for specifying the actual build target platform.
When Cortex-A support is added in the future, SOC_XILINX_ZYNQMP_APU
symbol should be added and used to conditionally handle APU-specific
code.
For more details, refer to the issue #20217.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The XCC toolchain may come with Clang front-end depending on
how it's built. Currently, the only SoC/board using XCC is
the intel_s1000_crb and its XCC toolchain comes with Clang
3.9.0 which has a lot better support for C99 and C++11 than
the portion based on GCC 4.2 (which does not even support
C++11). So this change attempts to use the Clang portion
instead of GCC if the Clang executable exists.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
XCC does not seem to handle if(IS_ENABLED()) well which means
XCC would not get rid of code even IS_ENABLED() is false.
In this case, sys_reboot() call in ztest is in this situation
so add a dummy version for ztest only.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
During LOG_*() macro expansions, XCC expands everything even though
IS_ENABLED() is used. This resulting in various log*() functions
(e.g. log_0(), log_1(), etc.) being required for linking. However,
when CONFIG_LOG_MINIMAL=y, those functions are not compiled from
the logging subsystem. Therefore, to get past the linking error,
dummy versions are being provided.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The newlib of XCC requires linking to _gettimeofday_r() which
should have been provided by its own C library, but obviously
isn't. So we need to provide a dummy version to get past
the build error.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
miv already had it defined, but let's shorten the names and use
them in the driver. This also adds it for sifive-freedom.
Signed-off-by: Olof Johansson <olof@lixom.net>
This is no longer needed, since all in-tree platforms are only using
the standard mstatus formats. Remove it to avoid the complexity.
Signed-off-by: Olof Johansson <olof@lixom.net>
Rename the NXP FTM instances in the KE1xF SoC to PWM to match the
other SoCs/boards using the FlexTimer as PWM generator.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Make sure light sleep hook function is compile when needed
This solves linking error for shippable test that only enable
light sleep.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
This patch adds a temporary workaround for the incorrect initialization
of the SystemCoreClock global variable that is done for the application
core of nRF5340 (see system_nrf5340_application.c) and that results in
k_busy_wait() producing delays of twice the requested time.
The problem is that the call to SystemCoreClockUpdate() that is done
at the end of SystemInit() correctly sets the value of SystemCoreClock
to reflect the hardware state after reset (HFCLK128M divided by 2),
but then the SystemCoreClock variable is initialized (by z_data_copy()
called from z_arm_prep_c()) to the __SYSTEM_CLOCK value that is defined
as 128000000. This in turn results in nrfx_coredep_delay_us() (used by
k_busy_wait() by default for nRF SoCs) delaying for twice the requested
number of microseconds.
The temporary workaround is to call SystemCoreClockUpdate() at a later
stage of the system initialization, in its nRF53 specific part.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The RTC peripheral found in the SAMD5x/SAME5x MCUs is very
simmilar to the one found in existing sam0 devices with only
a few changes to register names and the clock source selection.
Signed-off-by: Benjamin Valentin <benpicco@googlemail.com>
Before introducing the code for ARM64 (AArch64) we need to relocate the
current ARM code to a new AArch32 sub-directory. For now we can assume
that no code is shared between ARM and ARM64.
There are no functional changes. The code is moved to the new location
and the file paths are fixed to reflect this change.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
to its own linker file snippet so snippets can be placed before it.
Using zephyr_linker_sources().
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
The current GIC configuration scheme is designed to support only one
specific type and version of GIC (i.e. GIC-400 that implements the
GICv2 interface).
This commit adds a set of GIC version configuration symbols that can
be selected by the SoC configuration to specify which version of GIC
interface is implemented in the SoC.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
nrf51 and nrf52 by default was enabling temperature sensor if sensor
API was enabled. It was causing code size increase even when
temperature sensor was not touched by anyone. Removed default enabling
of temperature sensor for both series.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This patch enables SPI4 on the 96Boards STM32 Sensors Mezzanine.
SPI4 has been broken out to a Grove Connector on the board.
Changes:
- Updated board dts to enable spi4
- Updated board Kconfig
- Updated board documentation
- Update board pinmux
- Updated stm32f4 pinmux header file
- Updated stm32f401 dtsi
- Updated stm32f4 defconfig to enable PORTE GPIO
- Added board to spi_loopback test
Test: spi_loopback test passed
Signed-off-by: Sahaj Sarup <sahaj.sarup@linaro.org>
Setting EEPROM_STM32 with `default y` under `if SOC_FAMILY_STM32`
overrides `depends on SOC_SERIES_STM32L1X` in EEPROM_STM32
definition.
Then, if ever EEPROM is set in any file (as in
tests/drivers/build_all`), EEPROM_STM32 will be indeed set,
with potential issues on series where driver is not yet correctly
handled.
Fix this by removing EEPROM_STM32 definition in STM32 generic
file and set `default y` along with the `depends on` to keep
it effective.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Commit 94bed60abea53818c8cd723e233799a77c4b4e4b introduced separate
DT symbols for SPI and SPIM. Update dts_fixup.h for all nRF chips
to align with those changes.
Signed-off-by: Marcin Szymczyk <marcin.szymczyk@nordicsemi.no>
Commit a8a85c21cff7319e80af16688ea6076594fab7c8 introduced separate
DT symbols for TWI and TWIM. Update dts_fixup.h for all nRF chips
to align with those changes.
Signed-off-by: Marcin Szymczyk <marcin.szymczyk@nordicsemi.no>
Uses the generated device tree macros, DT_NXP_LPC_USART_USART_*, in the
mcux flexcomm driver and removes the now unused dts fixups from the
lpc54xxx and lpc55xxx socs.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Renames the lpc usart shim driver to more accurately reflect the
flexcomm hardware IP and to prepare for instantiating it on an SoC
outside the LPC family.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
When CONFIG_SYS_POWER_DEEP_SLEEP_STATES is not set, we have an unused
function that causes a build failure.
Enclose that function in the #ifdef.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
RISCV_RV32M1_VECTOR_BASE_ADDR is unused after commit 34b0516466
("boards: riscv32: rv32m1_vega: enable MCUboot for ri5cy core") (it was
called RISCV32_RV32M1_BASE_ADDR then).
RISCV_RV32M1_VECTOR_SIZE is still used, but is always 0x100, so remove
it too.
These symbols were only defined in a Kconfig.defconfig file.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Remove leading/trailing blank lines in .c, .h, .py, .rst, .yml, and
.yaml files.
Will avoid failures with the new CI test in
https://github.com/zephyrproject-rtos/ci-tools/pull/112, though it only
checks changed files.
Move the 'target-notes' target in boards/xtensa/odroid_go/doc/index.rst
to get rid of the trailing blank line there. It was probably misplaced.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Enables the high-speed spi instance 8 on the lpcxpresso55s69 board.
Configures pinmuxes and clocks, and updates board documentation
accordingly.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
As ISR stack size depends on application code, its best set
in the application's prj.conf file. Hence, remove it from
soc Kconfig files.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add device tree fixups for the NXP LPI2C bus timeout property to the
NXP i.MX RT and Kineties KE1xF SoC series.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
USE_CODE_PARTITION is a bit vague as a symbol name ("use code partition
how?"). Rename it to USE_DT_CODE_PARTITION to make it clearer that it's
about devicetree.
This would break any third-party configuration files that set it, but
it'll generate an error since kconfig.py promotes warnings to errors, so
it's probably not a big deal.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Created MEC1501 deep and light sleep example for MCHP MEC1501.
Modifications were made to SoC, board, timer, and hello world
sample program. Power management split into SoC power
implementing the interface and device power for device specific
logic.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
We remove the custom fixed MPU region definition from ST
STM32 SoC definitions, as the common fixed MPU
region definition is now used.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We remove the custom fixed MPU region definition from ARM
- Beetle
- Musca_a
- Musca_b1
- MPS2 (an385 and an521)
SoC definitions, as the common fixed MPU region definition
is now used.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We remove the custom fixed MPU region definition from Silicon
Labs exx32 SoC definitions, as the common fixed MPU region
definition is now used.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
For the NXP Kinetis SoCs with the NXP MPU regions, we keep
the confiruation of the fixed SoC MPU regions at each SoC
definition.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We remove the custom fixed MPU region definition from NXP IMX
RT, Kinetis, and LPC SoC definitions, as the common fixed MPU
region definition is now used.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We remove the custom fixed MPU region definition from Atmel
SAM SoC definition, as the common fixed MPU region definition
is now used.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We remove the custom fixed MPU region definition from Nordic
nRF SoC definition, as the common fixed MPU region definition
is now used.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We move the configuration of the fixed MPU regions for ARM
Cortex-M SoCs in a common place under soc/arm/common/cortex-m,
instead of having this configuration present in each ARM SoC or
SoC Series definition. The rationale behind this is that for all
SoCs the fixed MPU regions configured at SoC definition are only
used for enforcing default Flash and SRAM access policies, and
currently, this is common to all ARM SoCs with MPU support.
We also simplify the Flash and SRAM MPU region definition,
aiming at using a single MPU region index to program each
of them.
We still support the possibility for ARM SoCs to opt-out and,
instead, define their own custom fixed MPU regions at SoC
definition. We do it using a Kconfig option, introduced
explicitly for this purpose.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though.
Also replace some
config
prompt "foo"
bool/int
with the more common shorthand
config
bool/int "foo"
See the 'Style recommendations and shorthands' section in
https://docs.zephyrproject.org/latest/guides/kconfig/index.html.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The type of SOC_ATMEL_SAME70_DISABLE_ERASE_PIN is bool, yet its default
is specified as an int value of 0.
This commit removes the implied `default 0`, which is equivalent to
`default n`.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
In order to avoid a warning from Sphinx complaining that the
supported_features.rst file is not included in any ToC, rename it to
.txt so that Sphinx understands that this is only a snippet to be
included in other files.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The Newlib in the XCC toolchain for intel_s1000_crb has a few
missing functions which are reentrant versions of the one
defined in lib/libc/newlib/libc-hooks.c. So make these call
the correct functions.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Both HAS_I2C_DW and HAS_SPI_DW are not valid unless I2C and
SPI are both selected. So make them dependent on the parent
subsystem config.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This header contains encoding offsets for all the eSPI channels which
communicate data from/to the host.
Signed-off-by: Francisco Munoz <francisco.munoz.ruiz@intel.com>
Enable SWO debug output during system initialization and not as part of
GPIO driver initialization. After the modification the logger output
becomes available earlier during the boot process. Also, it's not
necessary anymore to build full GPIO driver only to enable SWO. This may
be critical when building small images.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
We need to fix the formato of the macros for nRF CACHE and NVMC
peripherals in soc.c, so the _S and _NS suffixes are skipped.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Since the nRF5340 DK contains the required DC/DC circuitry,
enable it by default while keeping it configurable. This
reduces power consumption in application core , network
core and high voltage use.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
in SMP, arc uses gfrc as wall clock, so it's ok
to enable SYSTEM_CLOCK_SLOPPY to avoid unnecessary
interrupts
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Add device tree elements for all gpio ports of the efr32mg12p including
the dts fixup entries.
Also remove gpio port e since this is not available in efr32mg12p socs.
Signed-off-by: Christian Taedcke <hacking@taedcke.com>
SoC initialization had an incorrect comment regarding system clock.
Corrected from 48Mhz -> 96Mhz.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
This commit adds basic support for nRF52833 SoC.
Changes affect introducing:
- architecuture files (dtsi)
- configuration of nrfx drivers
- adaptation of inclusions based on chosen SoC
- configuration of NFCT_PINS_AS_GPIOS depends on HAS_HW_NRF_NFCT.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
This patch introduces the support of the Low Power Timer
for the STM32WBxx from STMicroelectronics.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The DT_LP_SRAM_* are aliases to DT_MIMO_SRAM_1_* which
are deprecated, so changing these to DT_INST_1_MMIO_SRAM_*.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
When not using XCC, XCHAL_CACHE_MEMCTL_DEFAULT is not defined
which results in some variables not being able to be defined.
So define them.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Newlib requires a _heap_sentry so we add it to the linker script,
similar to what other xtensa linker scripts.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Enables the arm v7m mpu on the efr32mg soc and the board
efr32mg_sltb004a.
Tested on hardware with samples/mpu/mpu_test and
tests/kernel/mem_protect
Signed-off-by: Christian Taedcke <hacking@taedcke.com>
This patch introduces the support of the Low Power Timer
for the STM32L4xx from STMicroelectronics.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
If the user requires an entropy generator to be activated, enable
the SoC TRNG as a source for the entropy.
Signed-off-by: David Leach <david.leach@nxp.com>
Calls to nrfx HAL functions in various nRF platform related source
files are complemented with pointers to relevant peripherals.
Additionally, TIMER HAL functions that got renamed in nrfx 2.0.0 are
updated in the qemu_cortex_m0 board supporting code.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Update the hal_nordic module revision to switch to nrfx 2.0.0.
Add Kconfig options that enable to use the newly introduced nrfx
drivers in Zephyr.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Commit 2d7460482d missed replacing
the path to xtensa_api.h in the intel_s1000_crb soc.c file.
So update it.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Promote the private z_arch_* namespace, which specifies
the interface between the core kernel and the
architecture code, to a new top-level namespace named
arch_*.
This allows our documentation generation to create
online documentation for this set of interfaces,
and this set of interfaces is worth treating in a
more formal way anyway.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
There is no imx ccm shim driver in drivers/clock_control. This config
was only used to conditionally compile nxp hal drivers, even though the
imx6/7 soc init always needs them.
Updates the nxp hal to unconditionally compile the ccm drivers and
removes the unnecessary config symbol.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This adds supoprt for the Atmel SAME53 SoC.
The SAME5x/SAMD5x is a line of Cortex-M4F MCUs that share peripherals
with the sam0 Cortex-M0+ and saml1x Cortex-M23 parts.
Signed-off-by: Benjamin Valentin <benpicco@googlemail.com>
This adds supoprt for the Atmel SAME51 SoC.
The SAME5x/SAMD5x is a line of Cortex-M4F MCUs that share peripherals
with the sam0 Cortex-M0+ and saml1x Cortex-M23 parts.
Signed-off-by: Benjamin Valentin <benpicco@googlemail.com>
This adds supoprt for the Atmel SAMD51 SoC.
The SAME5x/SAMD5x is a line of Cortex-M4F MCUs that share peripherals
with the sam0 Cortex-M0+ and saml1x Cortex-M23 parts.
Signed-off-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
The SERCOMS on SAMD5x/SAME5x are connected to different MCLK
APBMASKs. There is no systematic way to tell whether a SERCOM
is connected to APBA, APBB, APBC or APBD, so rely on the
information from ASF instead of replicating it elsewhere.
This is needed for SPI, I2C and UART support on the SAMD5x/SAME5x
platform.
Signed-off-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
This adds supoprt for the Atmel SAME54 SoC.
The SAME5x/SAMD5x is a line of Cortex-M4F MCUs that share peripherals
with the sam0 Cortex-M0+ and saml1x Cortex-M23 parts.
Signed-off-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
This commit refactors kernel and arch headers to establish a boundary
between private and public interface headers.
The refactoring strategy used in this commit is detailed in the issue
This commit introduces the following major changes:
1. Establish a clear boundary between private and public headers by
removing "kernel/include" and "arch/*/include" from the global
include paths. Ideally, only kernel/ and arch/*/ source files should
reference the headers in these directories. If these headers must be
used by a component, these include paths shall be manually added to
the CMakeLists.txt file of the component. This is intended to
discourage applications from including private kernel and arch
headers either knowingly and unknowingly.
- kernel/include/ (PRIVATE)
This directory contains the private headers that provide private
kernel definitions which should not be visible outside the kernel
and arch source code. All public kernel definitions must be added
to an appropriate header located under include/.
- arch/*/include/ (PRIVATE)
This directory contains the private headers that provide private
architecture-specific definitions which should not be visible
outside the arch and kernel source code. All public architecture-
specific definitions must be added to an appropriate header located
under include/arch/*/.
- include/ AND include/sys/ (PUBLIC)
This directory contains the public headers that provide public
kernel definitions which can be referenced by both kernel and
application code.
- include/arch/*/ (PUBLIC)
This directory contains the public headers that provide public
architecture-specific definitions which can be referenced by both
kernel and application code.
2. Split arch_interface.h into "kernel-to-arch interface" and "public
arch interface" divisions.
- kernel/include/kernel_arch_interface.h
* provides private "kernel-to-arch interface" definition.
* includes arch/*/include/kernel_arch_func.h to ensure that the
interface function implementations are always available.
* includes sys/arch_interface.h so that public arch interface
definitions are automatically included when including this file.
- arch/*/include/kernel_arch_func.h
* provides architecture-specific "kernel-to-arch interface"
implementation.
* only the functions that will be used in kernel and arch source
files are defined here.
- include/sys/arch_interface.h
* provides "public arch interface" definition.
* includes include/arch/arch_inlines.h to ensure that the
architecture-specific public inline interface function
implementations are always available.
- include/arch/arch_inlines.h
* includes architecture-specific arch_inlines.h in
include/arch/*/arch_inline.h.
- include/arch/*/arch_inline.h
* provides architecture-specific "public arch interface" inline
function implementation.
* supersedes include/sys/arch_inline.h.
3. Refactor kernel and the existing architecture implementations.
- Remove circular dependency of kernel and arch headers. The
following general rules should be observed:
* Never include any private headers from public headers
* Never include kernel_internal.h in kernel_arch_data.h
* Always include kernel_arch_data.h from kernel_arch_func.h
* Never include kernel.h from kernel_struct.h either directly or
indirectly. Only add the kernel structures that must be referenced
from public arch headers in this file.
- Relocate syscall_handler.h to include/ so it can be used in the
public code. This is necessary because many user-mode public codes
reference the functions defined in this header.
- Relocate kernel_arch_thread.h to include/arch/*/thread.h. This is
necessary to provide architecture-specific thread definition for
'struct k_thread' in kernel.h.
- Remove any private header dependencies from public headers using
the following methods:
* If dependency is not required, simply omit
* If dependency is required,
- Relocate a portion of the required dependencies from the
private header to an appropriate public header OR
- Relocate the required private header to make it public.
This commit supersedes #20047, addresses #19666, and fixes#3056.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Replace CONFIG_WDT_0_NAME with DT_ALIAS_WATCHDOG_0_LABEL in samples and
test code. Now that all drivers are DT aware we don't ever set the
Kconfig option.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit adds driver support for DMA on f0/f1/f2/f3/f4/l0/l4
series stm32.
Notice due to some bugs, this is currently not working with f7.
There are two kinds of IP blocks are used across these stm32, one is the
one that has been used on F2/F4/F7 series, and the other one is the one
that has been used on F0/F1/F3/L0/L4 series.
Memory to memory transfer is only supported on the second DMA on
F2/F4 with 'st,mem2mem' to be declared in dts.
This driver depends on k_malloc to allocate memory for stream instances,
so CONFIG_HEAP_MEM_POOL_SIZE must be big enough to hold them.
Common parts of the driver are in dma_stm32.c and SoC related parts are
implemented in dma_stm32_v*.c.
This driver has been tested on multiple nucleo boards, including
NUCLEO_F091RC/F103RB/F207ZG/F302R8/F401RE/L073RZ/L476RG with the
loop_transfer and chan_blen_transfer test cases.
Signed-off-by: Song Qiang <songqiang1304521@gmail.com>
This commit moves DMA parameters previously hard coded in the driver
to the dts.
Signed-off-by: Song Qiang <songqiang1304521@gmail.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Added in commit dbc29fe77e ("boards: hsdk: add initial support of ARC HS
Development Kit"), then never used.
Found with a script. CPU_HS38_LINUX was only defined in a
Kconfig.defconfig file.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
1) Add cryptographically secure random functions to provide
FIPS 140-2 compliant random functions.
2) Add name to random function choice selectors to ease
selection in SOC .defconfig files
3) Add bulk fill random functions.
Signed-off-by: David Leach <david.leach@nxp.com>
Introduce a Kconfig symbol that utilizes a dt function to determine if
we have STM32 CCM functionality being utilized. This removes the
dependance on parsing symbols from generated_dts_board.conf.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Use this short header style in all Kconfig files:
# <description>
# <copyright>
# <license>
...
Also change all <description>s from
# Kconfig[.extension] - Foo-related options
to just
# Foo-related options
It's clear enough that it's about Kconfig.
The <description> cleanup was done with this command, along with some
manual cleanup (big letter at the start, etc.)
git ls-files '*Kconfig*' | \
xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Add SPI driver and bindings for LPSPI peripheral for the RV32M1 SOC.
Based heavily on the existing mcux LPSPI driver.
Signed-off-by: Karsten Koenig <karsten.koenig.030@gmail.com>
- Add WDT(0,1) to esp32.dtsi
- Extend the module to be able to use WDT(0,1)
- Some minor refactoring due to usage of device tree
Tests:
- samples/drivers/watchdog
- tests/drivers/watchdog/wdt_basic_api
Note:
- timer module interrupt registers shall be removed when
timer driver implemented.
Signed-off-by: Mohamed ElShahawi <ExtremeGTX@hotmail.com>
Move _LINKER and _ASMLANGUAGE to target.cmake because of how we pick the
linker script that might be used. This way regardless of how or where a
linker.ld gets included we will always set _LINKER & _ASMLANGUAGE (so
any header that needs check based on those defines they can,
specifically generated_dts_board.h)
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Clean up space errors and use a consistent style throughout the Kconfig
files. This makes reading the Kconfig files more distraction-free, helps
with grepping, and encourages the same style getting copied around
everywhere (meaning another pass hopefully won't be needed).
Go for the most common style:
- Indent properties with a single tab, including for choices.
Properties on choices work exactly the same syntactically as
properties on symbols, so not sure how the no-indentation thing
happened.
- Indent help texts with a tab followed by two spaces
- Put a space between 'config' and the symbol name, not a tab. This
also helps when grepping for definitions.
- Do '# A comment' instead of '#A comment'
I tweaked Kconfiglib a bit to find most of the stuff.
Some help texts were reflowed to 79 columns with 'gq' in Vim as well,
though not all, because I was afraid I'd accidentally mess up
formatting.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Move the definition of INIT_ENET_PLL to soc/arm/nxp_imx/rt/Kconfig.soc,
which is where the other INIT_*_PLL symbols are defined, and consistenly
enable it with 'select' like for the other symbols, instead of via
Kconfig.defconfig.mimxrt{1052,1062,1064}.
Remove an old empty INIT_ENET_PLL definition from
soc/arm/nxp_imx/rt/Kconfig.defconfig.series, which was just there to
hack around a dependency on NET_L2_ETHERNET. If the symbol does not
depend on NET_L2_ETHERNET in all cases, it's better to not add the
dependency.
Also add a help text to hint what's going on there.
Found with a script (INIT_ENET_PLL was only defined in Kconfig.defconfig
files).
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
SOC_SERIES is already defined with a type in arch/Kconfig, which is
always included.
Trying to get rid of unnecessary "full" symbol definitions in
Kconfig.defconfig files, to make the organization clearer. It can also
help with finding unused symbols.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Put a common definition of the SOC_PART_NUMBER symbol in
soc/arm/Kconfig, to make it always available for ARM SoCs. Have the
other definitions extend the base definition, without repeating the
type.
Also put the help text on just the base definition. It will show up in
the generated documentation and when looking at the symbol information
at any of the definition locations in the menuconfig (after going into
show-all mode).
Trying to get rid of unnecessary "full" symbol definitions in
Kconfig.defconfig files, to make the organization clearer. It can also
help with finding unused symbols.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Add a common definition for NUM_IRQS in arch/arm/core/Kconfig and
arch/riscv/Kconfig. That way, the type doesn't have to be given for
NUM_IRQS in all the Kconfig.defconfig files.
Trying to get rid of unnecessary "full" symbol definitions in
Kconfig.defconfig files, to make the organization clearer. It can also
help with finding unused symbols.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
There are two set of code supporting x86_64: x86_64 using x32 ABI,
and x86 long mode, and this consolidates both into one x86_64
architecture and SoC supporting truly 64-bit mode.
() Removes the x86_64:x32 architecture and SoC, and replaces
them with the existing x86 long mode arch and SoC.
() Replace qemu_x86_64 with qemu_x86_long as qemu_x86_64.
() Updates samples and tests to remove reference to
qemu_x86_long.
() Renames CONFIG_X86_LONGMODE to CONFIG_X86_64.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Define FP_FPU_DA in arch/arc/Kconfig to make it always available. That
way, the Kconfig.defconfig definitions can skip the type, making them
incomplete if the base definition of the symbol disappears. That makes
the organization easier to understand and errors easier to spot.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Define CPU_EM4* and CPU_EM6 in arch/arc/Kconfig to make them always
available. That way, the Kconfig.defconfig definitions can skip the
type, making them incomplete if the base definition of the symbol
disappears. That makes the organization easier to understand and errors
easier to spot.
The help texts were taken from
https://gcc.gnu.org/onlinedocs/gcc/ARC-Options.html. Help texts for
invisible symbols can be checked in the menuconfig too if you go into
show-all mode, so they're better than adding a comment.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Same deal as in commit 7fdb525754 ("kconfig: Use 'default' instead of
'def_bool' in Kconfig.defconfig files"), but I hacked Kconfiglib to also
find cases where the type is given separately as e.g.
config FOO
int
default 3
Motivation (from a note in
https://docs.zephyrproject.org/latest/guides/kconfig/index.html):
For a symbol defined in multiple locations (e.g., in a
Kconfig.defconfig file in Zephyr), it is best to only give the
symbol type for the "base" definition of the symbol, and to use
'default' (instead of 'def_<type>' value) for the remaining
definitions. That way, if the base definition of the symbol is
removed, the symbol ends up without a type, which generates a
warning that points to the other definitions. That makes the extra
definitions easier to discover and remove.
It's also nice if 'def_bool' and the like turn into a semi-reliable flag
that the symbol is only defined in Kconfig.defconfig files. That might
be a sign that things could be cleaned up.
Will do a separate pass later to remove some symbols only defined in
Kconfig.defconfig files.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Replace:
dt_chosen_reg_addr
dt_chosen_reg_size
dt_node_reg_addr
dt_node_reg_size
with:
dt_chosen_reg_addr_int
dt_chosen_reg_size_int
dt_chosen_reg_addr_hex
dt_chosen_reg_size_hex
dt_node_reg_addr_int
dt_node_reg_size_int
dt_node_reg_addr_hex
dt_node_reg_size_hex
So that we get the proper formatted string for the type of symbol.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Now that everything is DT based for I2C drivers we can rename the
CONFIG_I2C_[0..5]_NAME define to DT_I2C_[0..5]_NAME.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add binding for arm,mps2-fpgaio-gpio and update device tree and change
FPGA GPIO init code to utilize device tree defines.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Configures the default sdhc driver for the imx rt soc series so
applications don't have to configure it explicitly.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Unused after commit 4973787c10 ("pinmux: Remove the k64 pinmux driver").
Found with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Move the selection of the IP clock source for the modules in the NXP
Kinetis KE1xF SoCs from being hardcoded in soc.c to being specified in
the device tree.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add missing definitions for the base addresses of the NXP LPUARTs to
the NXP KE1xF SoC DTS fixup.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
it's bug found after implementing direct irq support,
nsim_hs has the same number of interrupts available
as nsim_em
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Depending on LiteX configuration, CSRs
(control&status registers) might be split
into several consecutive registers.
This introduces common helper functions
for all LiteX drivers providing access
to CSRs for a default LiteX configuration
(data_width = 8bit, bus_width = 32bit).
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
For nordic_nrf, this commit relocates HAS_CMSIS_CORE selection from
SoC Kconfig to the HAL module Kconfig, as done for other SoCs.
For nxp_kinetis, remove redundant HAS_CMSIS_CORE selection in SoC
Kconfig, as it is already selected by the HAL Kconfig.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates all references to HAS_CMSIS to use HAS_CMSIS_CORE
instead. With the changes introduced to allow multiple CMSIS variants
to be specified, the latter is semantically equivalent to the former.
For more details, see issue #19717.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
STM32L151XB-A SoC is almost similar to the STM32L151XB SoC except that
it has more RAM (32KiB). Hence add devicetree and Kconfig support.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Remove the inclusion of kernel_includes.h from soc.h and replace
it with including the board-specific auto-generated headers. This
aligns the soc.h header with the current policy not to include
kernel headers in soc.h.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We enable Memory Protection on stm32 nucleo_g071rb board,
since the respective SoC series implements the ARM MPU.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Remove the
# Omit prompt to signify a "hidden" option
comments that appear on some symbols. They seem to have been copy-pasted
at random, as there are lots of promptless symbols that don't have them
(that's confusing in itself, because it might give the idea that the
ones with comments are special in some way).
I suspect those comments wouldn't have helped me much if I didn't know
Kconfig either. There's a lot more Kconfig documentation now too, e.g.
https://docs.zephyrproject.org/latest/guides/kconfig/index.html.
Keep some comments that give more information than the symbol having no
prompt.
Also do some minor drive-by cleanup.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
STM32L1 uses the same spi controller as STM32F1 so we can just set the
right addresses and enable them. We also need to add the fixup names and
to correctly include the header for ST LL HAL.
Signed-off-by: Karl Palsson <karlp@etactica.com>
This will be used for both 32-bit and 64-bit mode.
This header gets pulled in by x86's arch/cpu.h, so put
it in include/arch/x86/.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Move systick activation in soc/ as a Kconfig.defconfig file and
remove activation in boards _defconfig files.
This will allow to deactivate it in a more flexible way
with upcoming LPTIMER as tick source when power management
features are enabled.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
For LL header inclusion, use _STM32 Kconfig symbol
(related to the driver), rather than generic symbol,
that could theoretically use an alternate solution.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The patch adds initial support for STM32F030X4 SoC.
STM32F0 Cube package advises to use 'stm32f030x6' code
for both STM32F030x4 and STM32F030x6 SoC variants.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Add duplicate per-CPU data structures (x86_cpuboot, tss, stacks, etc.)
for up to 4 total CPUs, add code in locore and z_arch_start_cpu().
The test board, qemu_x86_long, now defaults to 2 CPUs.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Add soc and dts files to support for most of the common peripherals
in the STM32G4 series. Add specific support for the STM32G431RB.
Signed-off-by: Richard Osterloh <richard.osterloh@gmail.com>
Add KConfig board support to match board jumper settings
Failing to update bank selection will affect GPIOs tied to VTR3
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
This patch re-namespaces global variables and functions
that are used only within the arch/arm/ code to be
prefixed with z_arm_.
Some instances of CamelCase have been corrected.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is part of the core kernel -> architecture interface and
has been renamed z_arch_kernel_init().
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
k_cpu_idle() and k_cpu_atomic_idle() were being directly
implemented by arch code.
Rename these implementations to z_arch_cpu_idle() and
z_arch_cpu_atomic_idle(), and call them from new inline
function definitions in kernel.h.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add a set of build time assertions that checks if the peripheral base
addresses defined in dts nodes match the values provided by nrfx/MDK.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Various C and Assembly modules
make function calls to z_sys_trace_*. These merely call
corresponding functions sys_trace_*. This commit
is to simplify these by making direct function calls
to the sys_trace_* functions from these modules.
Subsequently, the z_sys_trace_* functions are removed.
Signed-off-by: Mrinal Sen <msen@oticon.com>
Enable CMSDK GPIO driver on v2m_musca_b1 SoC/Board. Add LEDs that are
on the board and init the pinmux for those LEDs to work.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This adds support for Kinestis K22
Co-authored-by: Sean Nyekjaer <sean.nyekjaer@prevas.dk>
Co-authored-by: Oliver Stäbler <oliver.staebler@bytesatwork.ch>
Co-authored-by: Tom Burdick <thomas.burdick@gmail.com>
Signed-off-by: Tom Burdick <thomas.burdick@gmail.com>
We shall not include core kernel headers in soc.h
header of ARM SoCs. We should try to only include
the vendor headers and auto-generated board header
from DTS. This commit implements this policy for
the SoCs, whose builds have shown to fail due to
header inclusion cycles.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This file contains redundant definitions of a bunch of nRF IRQ numbers
(not all, however) that only generates confusion, as enumeration values
provided by MDK can be used instead.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This change is done so that there is no need to additionaly include
<nrfx.h> before <soc/nrfx_coredep.h> (what might be a bit surprising)
and so that <nrfx_config.h> doesn't need to be include separately for
nRF SoCs requiring a special mapping of peripheral accessing symbols.
This commit removes also no longer needed inclusions and updates
the hal_nordic module with required minor correction of nrfx_glue.h.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Header files of nrfx HALs are not supposed to be included directly
but only with their names prepended with the hal/ directory (so that
an inclusion of an nrfx HAL header clearly differs from an inclusion
of an nrfx driver header).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
A commit that organizes the soc.h header of NXP SoCs:
- removing redundant inclusions of sys/util.h
- removing inclusions of device.h and kernel_includes.h
- including the auto-generated DTS board header
- including the fsl_common.h header
- fixing minor style issues
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We, now, have multiple nRF52x SoCs with 2.4GHz
Radio with LE Coded PHY Capabilities. Therefore,
we would like to have a Kconfig option and select
it in the corresponding SoCs. This allows us to
simplify several #ifdef blocks in the nRF Bluetooth
Controller that would, otherwise, require listing
all nRF SoCS with LE Coded PHY support.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Enable CMSDK GPIO driver on v2m_musca SoC/Board. Add LEDs that are on
the board and init the pinmux for those LEDs to work.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
A 16bits on/off based PWM, found on MEC1501.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add RTC timer driver for CC13X2/CC26X2, and use it instead of systick
as system clock. It is necessary to use this timer for power
management support, so that the system can exit from deep sleep upon
expiry of timeouts.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
Include .gcc_except_table (sub-)sections in linker files to support C++
with exceptions enabled. If these sections are not mapped warnings will
be generated for orphaned sections at link time.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
Make sure that all sub-sections of .gcc_except_table are mapped in
rodata else C++ builds with exceptions enabled will generate warnings
due to orphan sections.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
No users of this driver after dropping quark platforms.
COUNTER_0_NAME was only defined by the QMSI driver and was defined but
not used in DTS fixup files of ateml_sam0 SoCs. Removing those leftover
defines as well.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This driver was still using CONFIG_* values to determine its address,
IRQ, etc. Add a binding for an "intel,hpet" device and migrate this
driver to devicetree.
Fixes: #18657
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
* add pinmux driver. hsdk board has arduino, mikrobus and
pmod interfaces, which can be confiured for different function,
such as: gpio, spi, uart, iic.
* add introduction for arduino, mikrobus and pmod interfaces.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
RT SOCs have several memory areas (OCRAMs, DTCM, ITCM, SDRAM, FLASH...)
but only two are selected for FLASH (code) and RAM (data).
It would be good to let the linker be aware about other regions, which
could then be used by drivers or application to create dedicated
sections and relocate memory. For example if we have code in ITCM and
data in DTCM, we still need a dma-able region/section for e.g.
video/camera buffers.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Add qemu_x86_long board (with CONFIG_X86_LONGMODE=y) for testing.
This requires adding support to soc/ia32 for long mode (trivial),
and adding a quick 64- to 32-bit ELF conversion before invoking
QEMU, which apparently doesn't like 64-bit kernel files.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The previous linker script was barebones and non-standard. It is
replaced with a script conforms to the rest of the Zephyr arches,
utilizing include/linker headers and standard macros.
link-tool-gcc.h is updated to account for the "i386:x86-64" arch and
the generation of 64-bit ELF binaries.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This patch adds basic build infrastructure, definitions, a linker
script, etc. to use the Zephyr and 0.10.1 SDK to build a 64-bit
ELF binary suitable for use with GRUB to minimally bootstrap an
Apollo Lake (e.g., UpSquared) board. The resulting binary can hardly
be called a Zephyr kernel as it is lacking most of the glue logic,
but it is a starting point to flesh those out in the x86 tree.
The "kernel" builds with a few harmless warnings, both with GCC from
the Zephyr SDK and with ICC (which is currently being worked on in
a separate branch). These warnings are either related to pointer size
differences (since this is an LP64 build) and/or dummy functions
that will be replaced with working versions shortly.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Update the -march flag passed to the compiler to reflect the
underlying microarchitecture is 'goldmont'.
Fixes: #17104
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
There are 2 other timers that could be selected, let's just take the
first 32bits one. This should be sufficient to verify the driver.
Enabling the timer in relevant board's dts file as well.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Such basic timer is found on MEC150x for instance.
Since instances have dedicated data, let's define specifice instance
based on unique DT base address definition.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Refactors the kinetis flash configuration field so it can be shared
across all kinetis SoCs. Defaults are overridden for the k8x and ke1xf
series to preserve values used prior to this refactoring.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Kinetis SoCs have a 16-byte flash configuration field that must be
loaded at a specific address in flash. This field is not needed if we
are building an image to be chainloaded by MCUboot or a RAM-only image,
so we can exlude it in these cases and recover some wasted flash.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Convert use of dt_int_val/dt_hex_val to dt_node_reg_{addr,size}. As
we want to remove dt_int_val/dt_hex_val.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert how we get the various chosen properties like "zephyr,console"
to use the new kconfig functions like dt_chosen_to_label.
Because of how kconfig parses things we define a set of variables of the
form DT_CHOSEN_Z_<PROP> since comma's are parsed as field seperators in
macros.
This conversion allows us to remove code in gen_defines.py for the
following chosen properties:
zephyr,console
zephyr,shell-uart
zephyr,bt-uart
zephyr,uart-pipe
zephyr,bt-mon-uart
zephyr,uart-mcumgr
zephyr,bt-c2h-uart
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Configuration item custom busy wait is required for all MEC1501
series if its RTOS timer driver is enabled. We moved the selection
of the timer from board level to MEC1501 SoC level.
Frequency selection remains at the board level.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
Enables the arm v7m mpu on the lpc54114 m4 core. Reuses the mpu
configuration from the i.mx rt, which has the same mpu.
Tested on hardware with tests/kernel/mem_protect
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The driver for STM32's independent watchdog already exists and is
compatible with the stm32wb SoC. Enable the independent watchdog
for the stm32wb series for use with this driver.
Signed-off-by: Robert Weber <robertweber95@gmail.com>
We re-wrote the xtensa arch code, but never got around
to purging the old implementation.
Removed those boards which hadn't been moved to the new
arch code. These were all xt-sim simulator targets and not
real hardware.
Fixes: #18138
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
XIP support in x86 was something of a mess. This
patch does the following:
- Generic ia32 SOC no longer defines a "flash" region
as generic X86 devices don't have a microcontroller-
like concept of flash. The same has been done for apollo_lake.
- Generic ia32 and apollo_lake SOCs starts memory at 1MB.
- Generic ia32 SOC may optionally have CONFIG_XIP enabled.
The board definition must provide a flash region definition
that gets exposed as DT_PHYS_LOAD_ADDR.
- Fixed definitions for RAM/ROM source addresses in ia32's
linker.ld when XIP is turned off.
- Support for enabling XIP on apollo_lake SOC removed, there's
no use-case.
- acrn and gpmrb boards have flash and XIP related definitions
removed.
- qemu_x86 has a fake flash region added, immediately after system
RAM, for use when XIP is enabled. This used to be in the ia32 SOC.
However, the default for qemu_x86 is to now have XIP disabled.
- Fixed tests/kernel/xip to run by default on boards that enable
XIP by default, plus an additional test to exercise XIP on
qemu_x86 (which supports it but has XIP switched off by default)
The overall effect of this patch is to:
- Remove XIP configuration for SOC/boards where it does not make
any sense to have it
- Support testing XIP on qemu_x86 via tests/kernel/xip, but leave
it off by default for other tests, to ensure it doesn't bit-rot
and that the system works in both scenarios.
- XIP remains an available feature for boards that need it.
Fixes: #18956
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The KE1xF SoC family SIM unit differs from the other Kinetis family
SoCs. Add a unique compatiable and binding for it.
Fixes#18160
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Utilize the multi-level irq infrastructure and replace custom handling
for PLIC on riscv-privilege SoCs. The old code offset IRQs in drivers
and various places with RISCV_MAX_GENERIC_IRQ. Instead utilize Zephyr's
encoded IRQ and replace offsets in drivers with the IRQ define from DTS.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Remove the handcoded multi-level IRQ values in device tree. We now are
able to generate the encoded multi-level IRQ value.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Update the module revision so that the following commits become
effective:
* nrfx_config: Use common mappings of Kconfig options to nrfx macros
* nrfx_config: Unify the way of enabling instances in nrfx drivers
* nrfx_config: Add missing mappings of Kconfig option symbols
* CMakeLists: Add missing inclusions of driver implementation files
The above changes require a minor correction in the nrf91/soc.h file,
so it is also modified in this commit.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This patch adds HAS_SWO selections to all STM32 SoCs supporting Serial
Wire Output via the Trace Port Interface Unit (TPIU).
Signed-off-by: Markus Fuchs <markus.fuchs@de.sauter-bc.com>
This provides an implemention for z_soc_irq_is_enabled()
as it is needed for multi-level interrupts.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This is required to get the watchdog test and sample working since the
required wdt device name macro is generic there.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The documentation for the GPMRB incorrectly made reference to the
up_squared board in its high-speed UART configuration section. We
consolidate the related documentation for all boards based on the
Apollo Lake SoC and adjust the language to be more generic.
Fixes: #18808
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
There are only 178 interrupt lines on CC3220SF. Hence we should not set
NUM_IRQS to a value exceeding that value. We are changing it to 178.
Fixes#18593
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
Consistently place C++ use of extern "C" after all include directives,
within the negative branch of _ASMLANGUAGE if used.
Remove extern "C" support from files that don't declare objects or
functions.
In arch/arc/arch.h the extern "C" in the including context is left
active during an include to avoid more complex restructuring.
Background from issue #17997:
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Consistently place C++ use of extern "C" after all include directives,
within the negative branch of _ASMLANGUAGE if used.
Remove extern "C" support from files that don't declare objects or
functions.
Background from issue #17997:
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Remove extern "C" support from files that don't declare symbols subject
to language linkage effects.
Consistently place C++ use of extern "C" after all include directives,
within the negative branch of _ASMLANGUAGE if used.
Background from issue #17997:
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Move the tail include file outside the extern "C" block.
Background from issue #17997:
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Remove extern "C" support from files that don't declare symbols subject
to language linkage effects.
Background from issue #17997:
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
'timeout' needs to be a signed variable, so that the
check for less-than-zero is able to result to true (if
the timeout actually expires). Addresses the coverity
issue [Coverity CID :203493] reported in #18379.
Fixes#18379.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The HAL/SDK code for imx6sx utilizes floating point support in
CCM_ANALOG_GetPllFreq function which is utilized by drivers to determine
clock information. As such we should enable hardware FP support by
default so we don't get pure soft-float emulation and pull in a bunch of
extra code.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Now when SMP support for ARC is available we may introduce a simulation
platform which might be used for testing & development for SMP setups.
One important note is stand-alone nSIM (as well as its "Free" flavour)
doesn't support SMP simulation so we have to switch to use of nSIM via
proprietary MetaWare debugger [1] and so:
1. We introduce new emulation target "mdb"
2. It's only possible to run that platform for those who
have MetaWare tools installed and valid license.
Though QEMU port for ARC is in work at the moment and once we
open that port and it has SMP support we'll switch to it and everybody
will be able to try ARC HS with SMP.
[1] https://www.synopsys.com/dw/ipdir.php?ds=sw_metaware
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
This commit includes the initial support of ARC HS Development Kit:
* hsdk soc support
* hsdk board support
* no mmu support, so no userspace
* smp support
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
This commit adds support for the Zynq UltraScale+ MPSoC as a qemu based
platform for Cortex-R based testing. This SoC only supports an
interrupt controller and serial port for limited testing.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
Use address based defines in the dts_fixup.h instead of DT_INST_ based
ones. The DT_INST_ will not get us the consistent mapping that is
needed (as we should assume the order of DT_INST_).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
In nRF9160 the reset pin is a dedicated one, it cannot be configured
as a regular GPIO pin, so this option should not be presented to users
building for this SoC, to not generate confusion.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
In order to increase code coverage, we force building a Secure
Firmware image by default (i.e. with option
CONFIG_TRUSTED_EXECUTION_SECURE set), when building for
mps2_an521 board. CONFIG_TRUSTED_EXECUTION_SECURE enables
compiling-in all TrustZone-related code in the tree, that is,
all ARM-specific code inside #ifdef CONFIG_ARM_SECURE_FIRMWARE.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Use clock specified in the device tree for obtaining the source clock
frequency for the pwm_mcux_ftm driver instead of relying on having an
NXP Kinetis MCG clock available in all SoCs supporting FlexTimer (FTM)
modules.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Perform OTP override when selecting 32Khz internal oscillator
to ensure 32KHz is enabled.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
- update doc for different core configuration.
- fix some bugs in dts related files.
- add dts config and defconfig for different core configuration.
- end files with a newline in boards/arc/emsdp/board.dtsi
- remove unused head in boards/arc/emsdp/doc/index.rst
- ARC_MPU_VER in different core is fixed. so remove some useless code
for ARC_MPU_VER judgements in Kconfig.defconfig.* files for emsdp
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
Removes very complex boot-time generation of page tables
with a much simpler runtime generation of them at bootup.
For those x86 boards that enable the MMU in the defconfig,
set the number of page pool pages appropriately.
The MMU_RUNTIME_* flags have been removed. They were an
artifact of the old page table generation and did not
correspond to any hardware state.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
i.MX RT10XX processors have four eFlexPWM modules, each containing
four 2-channels PWM submodules.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
The NSIM_HS target should have had the fpu flag to the compiler be:
-mfpu=fpud_all. Otherwise we get a build error.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
There are two aspects to this: CPU registers are twice as big, and the
load and store instructions must use the 'd' suffix instead of the 'w'
one. To abstract register differences, we simply use a ulong_t instead
of u32_t given that RISC-V is either ILP32 or LP64. And the relevant
lw/sw instructions are replaced by LR/SR (load/store register) that get
defined as either lw/sw or ld/sd. Finally a few constants to deal with
register offsets are also provided.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
With the upcoming riscv64 support, it is best to use "riscv" as the
subdirectory name and common symbols as riscv32 and riscv64 support
code is almost identical. Then later decide whether 32-bit or 64-bit
compilation is wanted.
Redirects for the web documentation are also included.
Then zephyrbot complained about this:
"
New files added that are not covered in CODEOWNERS:
dts/riscv/microsemi-miv.dtsi
dts/riscv/riscv32-fe310.dtsi
Please add one or more entries in the CODEOWNERS file to cover
those files
"
So I assigned them to those who created them. Feel free to readjust
as necessary.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Add a new sifive,plic-1.0.0 binding that inherits from the riscv,plic0
binding. The new binding adds a required riscv,ndev property, which
gives the number of external interrupts supported.
Use the new binding for microsemi-miv.dtsi (with a value of 31 for
riscv,ndev, from http://www.actel.com/ipdocs/MiV_RV32IMAF_L1_AHB_HB.pdf)
and riscv32-fe310.dtsi (which already assigns riscv,ndev).
Also remove a spurious riscv,ndev assignment from
riscv32-litex-vexriscv.dtsi.
Also make edtlib and the old scripts/dts/ scripts replace '.' in
compatible strings with '_' when generating identifiers.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Changes to MEC1501 HAL for eSPI changed loop constant used by SoC
code initializing the ECIA registers. Fixed by using HAL constants
that are invariant.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
pinmux: Add the relevant definition of the spi3 pin
dts: Fix a bug, spi3 does not have a label
soc: Supplement spi3 related definition
Signed-off-by: Findlay Feng <i@fengch.me>
ARC nSIM simulates pretty much any modern ARC core,
moreover it emulates a lot of different core features so
it is possible to play with them even wo real hardware.
Thus we add yet another ARC core family to be used on simulated
nSIM board.
For now it's just a basic configuration with ARC UART for
smoke-testing of Zephyr on ARC HS CPUs.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
The ARC HS is a family of high performance CPUs from Synopsys
capable of running wide range of applications from heavy DPS
calculation to full-scale OS.
Still as with other ARC cores ARC HS might be tailored to
a particular application.
As opposed to EM cores ARC HS cores always have support of unaligned
data access and by default GCC generates such a data layout with
so we have to always enable unaligned data access in runtime otherwise
on attempt to access such data we'd see "Unaligned memory exception".
Note we had to explicitly mention CONFIG_CPU_ARCEM=y in
all current defconfigs as CPU_ARC{EM|HS} are now parts of a
choice so we cannot simply select ether option in board's Kconfig.
And while at it change "-mmpy-option" of ARC EM to "wlh1"
which is the same as previously used "6" but matches
Programmer's Reference Manual (PRM) and is more human-friendly.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Add a hidden Kconfig option indicating that a given SoC is equipped
with the IEEE 802.15.4 capable radio so that the corresponding driver
configuration can depend on it.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Because NXP MPU's regions are dynamically enabled/disabled, USB
device's access maybe restricted when switching out of a task.
Background DMA transfers to/from RAM may happen during MPU region
reconfiguration or core idling.
Enabled USB (Kinetis MPU Master 4) to always have access to RAM address
space.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
This board and SoC was discontinued some time ago and is currently not
maintained in the zephyr tree.
Remove all associated configurations and variants from the tree.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This board and SoC was discontinued some time ago and is currently not
maintained in the zephyr tree.
Remove all associated configurations and variants from the tree.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The SoC clock init code for USB was using a deprecated DTS define.
Switch to using the non-deprecated form.
Fixes: #17772
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add a kernel timer driver for the MEC1501 32KHz RTOS timer.
This timer is a count down 32-bit counter clocked at a fixed
32768 Hz. It features one-shot, auto-reload, and halt count down
while the Cortex-M is halted by JTAG/SWD. This driver is based
on the new Intel local APIC driver. The driver was tuned for
accuracy at small sleep values. Added a work-around for RTOS
timer restart issue. RTOS timer driver requires board ticks per
second to be 32768 if tickless operation is configured.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
The uart_stellaris driver used system clock frequency
as a base for baudrate calculation. This commit corrects
that by obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The uart_qmsi driver used system clock frequency
as a base for baudrate calculation. This commit corrects
that by obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The uart_msp432p4xx driver used system clock frequency
as a base for baudrate calculation. This commit corrects
that by obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The uart_pl011 driver used system clock frequency
as a base for baudrate calculation. This commit corrects
that by obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The spi_dw driver used system clock frequency
as a base for SPI bus frequency calculation.
This commit corrects that by obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The log_backend_swo used system clock frequency
as a base for SWO clock calculation. This commit
corrects that by obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The SoC initialization code used timer clock frequency
as a system clock frequency. This commit corrects that by
obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The SoC initialization code used system clock frequency
as a CPU clock frequency. This commit corrects that by
obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The SoC initialization code used system clock frequency
as a CPU clock frequency. This commit corrects that by
obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The SoC initialization code used system clock frequency
as a CPU clock frequency. This commit corrects that by
obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The SoC initialization code used system clock frequency
as a CPU clock frequency. This commit corrects that by
obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The SoC initialization code used system clock frequency
as a CPU clock frequency. This commit corrects that by
obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The SoC initialization code used system clock frequency
as a CPU clock frequency. This commit corrects that by
obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The SoC initialization code used system clock frequency
as a CPU clock frequency. This commit corrects that by
obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The SoC initialization code used system clock frequency
as a CPU clock frequency. This commit corrects that by
obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The SoC initialization code used system clock frequency
as a CPU clock frequency. This commit corrects that by
obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The SoC initialization code used system clock frequency
as a CPU clock frequency. This commit corrects that by
obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The SoC initialization code used system clock frequency
as a CPU clock frequency. This commit corrects that by
obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The i2c_cc32xx driver used system clock frequency
as a base for I2C clock frequency calculation.
This commit corrects that by obtaining the needed value from DTS.
Please note, that for I2C devices the clock-frequency property
specifies SCK frequency, instead of frequency of the clock driving
peripheral. To solve that problem, a new property was added.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Have the SoC dtsi files for microchip mark the devices (uart & i2c) as
disabled by default and let the board dts files enable which one's they
need/use (which is what's happening already).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Because NXP MPU's regions are dynamically enabled/disabled, ENET
device's access maybe restricted when switching out of a task.
Background DMA transfers from RAM to MAC/PHY may happen during MPU
region reconfiguration or core idling.
Enabled ENET (Kinetis MPU Master 3) to always have access to RAM address
space.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
This patch populates "clocks" property in stm32 usb nodes
for clock related usb configuration code of each dtsi files
Signed-off-by: Francois Ramu <francois.ramu@st.com>
uint8_array values are now generated as structure initializers. Update
the code accordingly. The implementation assumes that existing
devicetree source does not provide the correct OUI so preserves the
in-driver override of the value provided by devicetree and its setting
for random/unique addresses.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Implementation of pinmux of usdhc depends on board design.
Usdhc driver could change pinmux according to SD mode, SoC
should provide API for this. Board pinmux should register
its pinmux function to SoC.
Signed-off-by: Jun Yang <jun.yang@nxp.com>
Add flash support for STM32G0X SoC series.
Signed-off-by: Philippe Retornaz <philippe@shapescale.com
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This patch adds support for the STM32G071xx
from STMicroelectronics.
Signed-off-by: Philippe Retornaz <philippe@shapescale.com>
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Protect gpio_configure function in dual core context.
This operation is not needed for other fuctions of the api:
* init
* read
* write
Protecting gpio_configure also protects access to
interrupt_controller IP.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add support for C-M4 core on STM32H7 series.
It is enabled in Dual core context with 2 alternatives boot methods:
* Boot CM4 CM7: Both core boot at reset, then CM4 enters Stop mode.
CM7 performs system configuration then finally wakes up CM4
* Boot CM7, CM4 Gated: Only CM7 boots at reset. Once done with
system configuration it triggers (requires option byte update)
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Provide basic clock control driver for STM32H7.
Bus clock activation is done through CM7 and CM4 common registers
so we don't have to care to the CPU Id before accessing.
Accesses are not protected for now. Only possible configuration
is system clock source set to HSE driven PLL.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
As with the STM32 boards, these had an existing default for tick rate
that is now lower than the 10 kHz default. They're SysTick devices
that can handle the higher rate just fine. Use that.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The nRF timer runs at only 32 kHz, so there's little reason to try to
divide it to get a synthesized tick rate. Just use the raw clock as
the tick rate, which provides maximal precision and very
singnificantly simplifies the generated code for the ISR.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
UART related defines in STM32F7 files where filled with
references to USART.
Instances 4, 5, 7 and 8 of SoC serial port are actually UARTs.
So rename define's accordingly. Otherwise it couldn't build.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The MVIC is no longer supported, and only the APIC-based interrupt
subsystem remains. Thus this layer of indirection is unnecessary.
This also corrects an oversight left over from the Jailhouse x2APIC
implementation affecting EOI delivery for direct ISRs only.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This file is 32-bit specific, so it is moved into the ia32/ directory
and references to it are updated accordingly.
Also, SP_ARG* definitions are no longer used, so they are removed.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The IPC peripheral is missing from the list of
supported HW for nRF9160, so this commit adds
that.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The AN521 is a Soft Macro Model implementation of the SSE-200 subsystem
with SIE-200 and CMSDK components targeting the MPS2+ board. The
SSE-200 subsystem implements two Cortex-M33 cores.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Signed-off-by: Karl Zhang <karl.zhang@linaro.org>
move misc/util.h to sys/util.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/slist.h to sys/slist.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/printk.h to sys/printk.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/__assert.h to sys/__assert.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move uart.h to drivers/uart.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move ipm.h to drivers/ipm.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move sys_io.h to sys/sys_io.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move power.h to power/power.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move tracing.h to debug/tracing.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The libc hooks for Newlib requires CONFIG_SRAM_SIZE and
the symbol "_end" at the end of memory. This is in preparation
for enabling Newlib for x86_64.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
* when -mcpu is given, e.g. -mcpu=em4_dmips,-mnorm,-mdiv_em
etc. are already given, no need to duplicate
* use zephyr_compiler_options to replace zephyr_cc_option
zephyr_cc_option will do compile option check first then add
the checked options into option list. It's too strict that makes
options like -mfpu, -mmpy-option cannot be added.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Move internal and architecture specific headers from include/drivers to
subfolder for interrupt_controller:
include/drivers/interrupt_controller/
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Removed Quark D2000 SoC files and first-order related DT bindings.
A few config options have been moved from the CONFIG_* space to
the DT_* space, as they were defined in the D2000 Kconfig files
and "leaked" into the other Quark trees.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Enable the MCUX SCG clock controller driver by default for the NXP
Kinetis KE1xF SoC series. Move the generic CLKOUT configuration from
SoC to the clock controller driver.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Allow individual specification of the time quanta used for the CAN bus
propagation segment and phase segment 1.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Definition of obsolete FLASH_PAGE_SIZE Kconfig symbol was
remaining in STM32F3 soc files.
Clean these.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
