The previous PRs added the SAM0 DAC driver. Now document and enable
it, including enabling it in the DAC sample.
Signed-off-by: Michael Hope <mlhx@google.com>
The peripheral is the same on the SAMD20 and SAMD21/R21 except for
different clock and interrupt settings.
Leave disabled by default as the DAC is fairly power hungry.
Signed-off-by: Michael Hope <mlhx@google.com>
Add @abrodkin to the list of CODEOWNERS for ARC code (ARCH,
BOARDS, DTS) instead of @vonhust.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Adding the get_maintainer.py script
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add an entry in CODEOWNERS for auto-assigning reviewers
in MAINTAINERS.yml and get_maintainer.py files.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This patch enables the rtc so that the testcase
tests/drivers/counter/counter_basic_api
can run on this nucleo_f091rc board
also when running sanity check
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The Olimex STM32-h103 is a development board based on the STM32F103RB,
very similar to the stm32_mini, which was used as a reference for the
pinmux configuration.
Signed-off-by: Josep Puigdemont <josep.puigdemont@gmail.com>
This sample is nothing more than just a special setup of UART for some
nfc, has nothing specific to nfc and might be misleading, so removing.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Just as NULL pointers should not be dereferenced, they should
not be called either.
Fixes 26723
Signed-off-by: Pete Skeggs <peter.skeggs@nordicsemi.no>
Remove the device_type = "memory" property from the PSRAM node. We make
the slightly arbitrary distinction of using 'mmio-sram' compatible for
memories that don't need some kinda of dram style configuration or may
be on die.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Rewrite 'exit_tickless_idle' macro to make code more readable.
No functional changes intended.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
NOP instruction is available via builtin for ARC so get rid of all
ASM inlines with NOP/NOP_S instructions.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Zephyr has generic find_msb_set and find_lsb_set implementations.
They are based on builtins so they are optimized enough.
Drop custom ASM implementation.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
_vector_table and __vector_relay_table symbols were exported with GTEXT
(i.e. as functions). That resulted in bit[0] being incorrectly set in
the addresses they represent (for functions this bit set to 1 specifies
execution in Thumb state).
This commit corrects this by switching to exporting these objects as
objects, i.e. with GDATA.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Update stm32 ethernet driver to get basic boot configuration from
device tree.
So far information are:
- Label
- Base address
- IRQ number and prio
- Clock settings
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Update boards that use to declare ethernet support to enable
matching ethernet node.
Similarly to other devices, use dts API to control ethernet pin
settings.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The Arduino Nano 33 IOT is a a small form factor development board
with USB, Wifi, Bluetooth, a 6 axis IMU, and secure element.
Signed-off-by: Michael Hope <mlhx@google.com>
Add PL330 dma driver support, this driver
- supports 32 bit memory to memory operation
- supports 36 bit memory to memory operation
under a config flag DMA_64BIT
- supports secure channel
Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com>
Add 64bit source_address/dest_address fields support.
This is needed in situation where DMA controller is capable
of handling more than 32bit source and destination addresses.
Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com>
The mempool implementation doesn't require specific sizes and can
support arbitrary sizes up to the limit of available memory. The
Kconfig documentation on this configuration was confusing user.
Fixes#20418
Signed-off-by: David Leach <david.leach@nxp.com>
Fix compilation warnings when CONFIG_NET_SOCKETS_OFFLOAD enabled
warning: passing argument 5 of '__eswifi_socket_new' makes pointer
from integer without a cast [-Wint-conversion]
395 | idx = __eswifi_socket_new(eswifi, family, type, proto, 0x50CE);
| ^~~~~~
| |
| int
eswifi.h:137:21: note: expected 'void *' but argument is of type 'int'
137 | int proto, void *context);
| ~~~~~~^~~~~~~
In function 'eswifi_socket_bind':
warning: comparison between pointer and integer
461 | if ((addrlen == NULL) || (addr == NULL) ||
|
Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com>
use common log module across all eswifi sources, which allows
to compile with CONFIG_NET_SOCKETS_OFFLOAD.
Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com>
MISRA-C directive 4.10 requires that files being included must
prevent itself from being included more than once. So add
include guards to the offset files, even though they are C
source files.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
MISRA-C directive 4.10 requires that files being included must
prevent itself from being included more than once. So add
include guards to the offset files, even though they are C
source files.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
It is useful to show sensor channels for a battery in cohesive block as
it is easier to read. Add a 'battery' command to handle this. It only
supports a single battery, relying on the device-tree alias to select
it.
uart:~$ battery
Temp: 23.55 C
V: 4.31 V
V-desired: 4.40 V
I: 574 mA (CHG)
I-desired: 2000 mA
Charging: Not Allowed
Charge: 100 %
V-design: 3.86 V
Remaining: 6764 mA
Cap-full: 6764 mA
Design: 6910 mA
Time full: 0h:00
Time empty: 0h:00
Signed-off-by: Simon Glass <sjg@chromium.org>
Consolidate creation of edtlib.EDT objects from a build directory's
devicetree into one place by loading it from build/zephyr/edt.pickle
everywhere. A previous commit creates edt.pickle from gen_defines.py.
In addition to probably speeding things up slightly by not reparsing
the devicetree, the main benefit of this approach is creating a single
point of truth for the bindings directories and warnings
configuration, meaning we don't have to worry about them getting out
of sync while being passed around between devicetree creation and
usage time.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
We enhance the help text of the BOARD_ENABLE_CPUNET Kconfig
option, to stress that if the option is used when building
a Non-Secure Application MCU firmware image, the Secure
image counterpart also needs to perform the required GPIO
allocation.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Building Zephyr with CONFIG_TRUSTED_EXECUTION_SECURE=y implies
building also a Non-Secure image. The Non-Secure image will, in
this case do the remainder of actions to properly configure and
boot the Network MCU. So the (strictly) secure firmware image
does not need to execute the configuration and the booting of
the Network MCU, except for the part that does security
attribution. In the absence of any TrustZone awareness, the
single Application MCU firmware will do all the required
steps to configure and boot the Network MCU.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
