move led_strip.h to drivers/led_strip.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move led.h to drivers/led.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move ipm.h to drivers/ipm.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move i2s.h to drivers/i2s.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move i2c.h to drivers/i2c.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move hwinfo.h to drivers/hwinfo.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move gpio.h to drivers/gpio.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move gna.h to drivers/gna.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move flash.h to drivers/flash.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move entropy.h to drivers/entropy.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move dma.h to drivers/dma.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move counter.h to drivers/counter.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move clock_control.h to drivers/clock_control.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move can.h to drivers/can.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move aio_comparator.h to drivers/aio_comparator.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move adc.h to drivers/adc.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move watchdog.h to drivers/watchdog.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move sys_io.h to sys/sys_io.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move power.h to power/power.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move atomic.h to sys/atomic.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move stats.h to stats/stats.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Convert DT_.*_GPIO_{CONTROLLER,PIN,FLAGS} ->
DT_.*_GPIOS_{CONTROLLER,PIN,FLAGS)
Used the following commands to make these conversions:
git grep -l DT_.*_GPIO_CONTROLLER | xargs sed -i 's/DT_\(.*\)_GPIO_CONTROLLER/DT_\1_GPIOS_CONTROLLER/g'
git grep -l DT_.*_GPIO_PIN | xargs sed -i 's/DT_\(.*\)_GPIO_PIN/DT_\1_GPIOS_PIN/g'
git grep -l DT_.*_GPIO_FLAGS | xargs sed -i 's/DT_\(.*\)_GPIO_FLAGS/DT_\1_GPIOS_FLAGS/g'
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Fix path for system_timer.h and loapic.h, we moved it to
include/drivers/timer/ and include/drivers/interrupt_controller/
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The existing local APIC timer driver (loapic_timer.c) has bitrotted
and doesn't support TICKLESS_KERNEL, which is the preferred mode of
operation. This patch introduces a completely new driver, called
the APIC timer driver - the name is changed to allow the drivers to
continue to coexist in the short term, and also because "APIC timer"
isn't ambiguous (the I/O APICs do not have timers).
This driver makes no attempt to work with the MVIC timer as the
previous version did, because MVIC support is deprecated.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The shim didn't check if a given endpoint was enabled before requesting
the nrfx_usbd driver to perform a read or write operation on it.
In certain circumstances this led to nrfx_usbd driver being stuck in
a loop waiting for the associated DMA transfer to complete.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This reverts commit 03ef375f5f.
The cfg.en flag contains only the state of the endpoint as seen by the
shim. It is mainly used to enable the endpoints when the USB peripheral
becomes ready for operation (and the USB stack may want to enable some
endpoints earlier, especially the control ones, so the operation must
be sometimes deferred). In particular, setting this flag to false has
no effect on the actual state of the endpoint in the hardware.
Moreover, this flag was set to false for all the endpoints, including
the control ones which should not be disabled, so such operation
actually fooled the shim.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This patch removes the "hard" selection of the USB_DEVICE_REMOTE_WAKEUP
Kconfig option for USB devices made on the nRF52840 SoC. Now it's up to
the application to decide if it wants to enable the option. This change
makes it possible to pass the USB3CV Chapter 9 Tests for applications
that don't use the remote wakeup feature, since when a USB device only
reports that it supports this feature, and the mentioned option makes
it to do so, one of the test cases expects the USB device to actually
perform the remote wakeup. And when the feature is not reported as
supported, the test case is skipped.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Add support for Kinetis MK64 series.
Interrupts are adapted because MK64 has other interrupts than KEx1F.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Add UDP support for eswifi driver. eswifi now can co-exist
with TCP and UDP functionality with 4 as max socket connection.
Tested UDP with custom DNS sample (wifi connect + DNS)
Signed-off-by: Parthiban Nallathambi <parthitce@gmail.com>
Port the lis2dw12 sensor driver on top of the lis2dw12_StdC
HAL interface (in modules/hal/st/sensor/stmemsc/).
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Move modem_receiver.h to the driver directory. No other users in the
tree and it is a private header.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move internal and architecture specific headers from include/drivers to
subfolder for timer:
include/drivers/timer
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move internal and architecture specific headers from include/drivers to
subfolder for interrupt_controller:
include/drivers/interrupt_controller/
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
It is useful that the ptp_clock_get() function can be called from
the userspace. Create also unit test for calling that function
from userspace.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The Quark D2000 is the only x86 with an MVIC, and since support for
it has been dropped, the interrupt controller is orphaned. Removed.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Removed Quark D2000 SoC files and first-order related DT bindings.
A few config options have been moved from the CONFIG_* space to
the DT_* space, as they were defined in the D2000 Kconfig files
and "leaked" into the other Quark trees.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This commit introduces new top_value setting configuration structure
with flag for controlling resetting of the counter during change of
top value.
Such change allows for #12068 implementation on hardware which
does not provide alarms.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Signed-off-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Enable the MCUX SCG clock controller driver by default for the NXP
Kinetis KE1xF SoC series. Move the generic CLKOUT configuration from
SoC to the clock controller driver.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Allow individual specification of the time quanta used for the CAN bus
propagation segment and phase segment 1.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add support for two CAN bus controller instances and disable both of
them by default. Enable CAN_1 for the STM boards currently supporting
CAN.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Match what other drivers are doing and use the general BUS define.
Change DT_ST_LIS2DH_0_BUS_SPI to DT_ST_LIS2DH_BUS_SPI
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The defines related to IRQ priority don't exist and aren't used. So
just pass 0 to IRQ_CONNECT for the priority field.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
During conversion in #16815 a few device tree instance macro aliases
where missed (probably due to them existing to support future SoCs
and so not currently compiled), this fixes their usage.
Signed-off-by: Derek Hageman <hageman@inthat.cloud>
During conversion in #16937 a few IRQ macro aliases where missed
(probably due to lack of enabled test cases that compile them),
this fixes their usage.
Signed-off-by: Derek Hageman <hageman@inthat.cloud>
The defines should have had a _0 on them, now that we generate the
proper defines, fixup the cases that used that old scheme.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Found a few annoying typos and figured I better run script and
fix anything it can find, here are the results...
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add __ASSERT() for coverity issue CID: 198874. Assert is used instead
of check since this is callback we get from stm32cube.
Fixes#16573
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
If the socket is closed, then do CAN detach if that is needed.
This way the CAN interrupts are not received if there are no
CAN sockets listening the data.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
- Even one-liner statement if () need { }
- you can coalesce assignment and condition if the later tests the
earlier only.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This commit updates counter Kconfig to use logger template to define
COUNTER_LOG_LEVEL option.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Prevent to reschedule a transfer if one is already ongoing (occupied).
This happens with USB class drivers scheduling transfer once interface
is enabled (netusb, ACM...) and cause freeze due to infinite loop in
low level driver.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
According to datasheet, there needs to be a minimum of 488µs
between each write to Enable register
Signed-off-by: Alexander Svensen <alsv@nordicsemi.no>
Some files cleanup was overlooked when STM32 clock_control
was re-factored in #16486.
Fix this by removing the now superfluous files.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Get spi hci driver to define its own rx thread, in order
not to mix with bt own RX thread as driver use bt_recv_prio
that expect to be used in a different thread than BT host one.
Fixes#15714
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The driver was using a mix of instance defines and alias, move to just
using the alias defines so its consistent.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Change code from using now deprecated DT_<COMPAT>_<INSTANCE>_<PROP>
defines to using DT_INST_<INSTANCE>_<COMPAT>_<PROP>.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Change code from using now deprecated DT_<COMPAT>_<INSTANCE>_<PROP>
defines to using DT_INST_<INSTANCE>_<COMPAT>_<PROP>.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Initialize the net_pkt cursor to begining after net_pkt_write.
Without which recv_cb can't peek/get net_pkt
Signed-off-by: Parthiban Nallathambi <parthitce@gmail.com>
Save few RAM bytes by declaring exti_irq_table as const.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Some code in stm32 exti driver was considering exti lines number
for which no IRQ_CONNECT was available. To be clear, this code
was not functional and since no one complained it was not used.
Besides, code to take into account these "high" irq lines was
complex hard to read and review.
Simplify state of things by removing completely this part of code.
It could be put back again piece by piece when required.
This change allows to get rid of EXTI_LINES definition.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Function stm32_exti_enable is complex and makes it hard to extend
to new stm32 series.
When MP1 support was added, table exti_irq_table was introduced
to simplify stm32_exti_enable function.
This change extends usage of this table to other series, without
adding or removing any functionality.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
TI_HDC Driver now also supports waiting for conversion to finish instead
of waiting for GPIO interrupt.
Signed-off-by: Nikos Oikonomou <nikoikonomou92@gmail.com>
Hdc1008 driver is renamed into ti_hdc to prepare it to support all
available Texas Instruments HDC sensors (e.g. hdc1080, hdc2080).
Signed-off-by: Nikos Oikonomou <nikoikonomou92@gmail.com>
This commit adds counter driver based on RTCC module for SiLabs Gecko
SoCs.
Tested with SLWSTK6061A / BRD4250B wireless starter kit.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
In order ease readability of Kconfig.stm32 file, split series
specific PLL configuration options into series specifc Kconfig
files.
This being done, we have now a similar pattern for series specific
code and series specific Kconfig files.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
RCC device could be common to various STM32 series.
Until now, PLL handling code was set in series specific files,
even if it was driving the same device than another series.
Minimize code duplication by factorizing code between series
when possible.
With this change, some series get additional features by getting
access to code developed for other series.
Additionally, while renaming the files, remove the non informative
'x' to minimize file name length
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This trivial patch extends the PCIe shell to check for and report
on a device's ability to use MSI-X interrupt signaling.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
When CONFIG_X2APIC is enabled, twiddle the appropriate MSR during
initialization to enable x2APIC mode.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
More clearly differentiate MVIC vs. APIC timer code, and use new APIC
accessors in include/drivers/loapic.h. Remove extraneous comments, and
other light cleanup work.
This driver is in need of a serious overhaul -- despite appearing to
have support for TICKLESS_KERNEL and DEVICE_POWER_MANAGEMENT, bitrot
has taken its toll and the driver will not build with these enabled.
These should be removed or made to work... but not in this patch.
Old x2APIC-related accessors in kernel_arch_func.h are eliminated.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Use new x2APIC-aware accessor functions in loapic.h instead of
locally-defined ones. Remove bitrot #defines (no longer used)
and extraneous comments with information from old data sheets.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Simple renaming and Kconfig reorganization. Choice of local APIC
access method isn't specific to the Jailhouse hypervisor.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
drivers/interrupt_controller/i8259.c is not a driver; it exists
solely to disable the i8259s when the configuration calls for it.
The six-byte sequence to mask the controllers is moved to crt0.S
and the pseudo-driver is removed.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
A basic display driver is added for a generic 32-bpp framebuffer.
Glue logic is added to the x86 arch to request the intitialization
of a linear framebuffer by the Multiboot loader (GRUB) and connect
it to this generic driver.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Per guidelines, all statements should have braces around them. We do not
have a CI check for this, so a few went in unnoticed.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Not all serial drivers support ASYNC operation and if they do,
they might not support it on every SoC.
Add the SERIAL_SUPPORT_ASYNC option to indicate ASYNC operation
is availiable.
Signed-off-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
It does make sense to initialize USB console after USB Device stack.
Note that the value is selected only if we specify USB_UART_CONSOLE
in prj.conf, not in menuconfig afterwards.
Fixes#16518
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Basically, all driver file names should start with the driver type as
prefix: wdt_ in case of watchdogs here, and not something custom like
wdog_.
For clarity, wdog_ prefix could be changed to wdt_ in the source code
also but that's a detail and will not be addressed here.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Basically, all driver file names should start with the driver type as
prefix: wdt_ in case of watchdogs here.
Maybe 'iwdg' keyword could be removed entirely, and also in function
names. However that is not the scope of this patch.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The compiler and linker was generating errors after
disabling `CONFIG_EXTI_STM32` due to inconsistency
in `interrupt_controller/CMakeLists.txt`
and not considering this option in gpio implementation.
Signed-off-by: Maciej Zagrabski <maciej.zagrabski@grinn-global.com>
Implement HCI driver for STM32WB. It allows host to controller.
It is based on ST library allowing communication over RAM shared
bewteen chip's C-M4 and C-M0 cores.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Some firmwares (looking at you, slimbootloader) don't set the registers
in PCI configuration space to indicate the IRQ routing, so we remove
the check that verifies that the user and firmware agree on IRQ number.
Also eliminate the return value of pcie_irq_enable() since no one uses
it and we can't return a meaningful value any longer.
Signed-off-by: Charles Youse <charles.youse@intel.com>
This adds support for the async API for SAM0 SERCOM USARTs using
DMA to drive the device.
Tested on SAMD21 with a few trivial programs and with
tests/drivers/uart/uart_async_api.
Signed-off-by: Derek Hageman <hageman@inthat.cloud>
Implement the get_status DMA API for the SAM0 DMA controller.
The busy field is set only when the selected channel is
actively transferring data (i.e. both enabled and selected by the
arbiter). The direction field is left unset, since that
information is not normally retained by the DMA controller.
Signed-off-by: Derek Hageman <hageman@inthat.cloud>
Add a flag to the sequence structure that tells the driver it should
calibrate the ADC prior to initiating the sample.
Implement this for nRF SAADC. The implementation supports the
workarounds for PAN-86 and PAN-178.
Relates-to: issue #11922
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Allow user to set log level for UART console drivers. Add
log level option to UART pipe driver in order to see what it
is sending and receiving.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The litex_timer driver used hard coded tick rate (set to 100 ticks
per second). This commit replaces the fixed value with a call to
system function which takes under account system configuration.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Add support of Seeed 2.8" TFT Touch Shield v2.0 to ILI9340 driver.
This driver supports color pixel formats of RGB888 and RGB565.
Signed-off-by: Bernard Lee <bernard.lee@nordicsemi.no>
soc_register.h is available in most of stm32 series.
It is sometime empty or contains includes to flash_registers.h,
which is included directly with direct reference in flash driver.
soc_register.h is also included in stm32 clock drivers, but this
driver do not use direct reference to any register anymore.
Clean up these files.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Cleanup logging and fix style. Use hex format specifier
for endpoint address. Remove periods from log messages.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
ESP32 can sport up to 4 network interfaces: two 802.11 (station and
ap), ethernet, and bluetooth. All of them derive from the same RDATA
register in efuse block 0. However, in most cases, the last (sixth)
octet will change like so:
- 802.11 station: mac[5] += 0
- 802.11 ap: mac[5] += 1
- bluetooth: mac[5] += 2
- ethernet: mac[5] += 3
Read "Number of universally admnistered MAC address" section in esp-idf
documentation[1] for more information.
[1] https://docs.espressif.com/projects/esp-idf/en/latest/
Signed-off-by: Leandro Pereira <leandro@hardinfo.org>
- Erase operations must be aligned to the erase-size.
- Don't need to perform an alignment check on a full erase. The offset
is not used in this case.
- Don't need to perform alignment check on a sector sized erase, as
this alignment is checked on entrance to the function.
- Removed some whitespace.
Signed-off-by: Ryan C Johnson <ryan.johnson@flex.com>
The values were swapped meaning the configured value for rxcnt was used
for txcnt and vice versa.
Signed-off-by: Sören Tempel <soeren+git@soeren-tempel.net>
This adds support for the basic timer counter (TC) found on SAM0
series parts. This driver only supports running the counter
in 32 bit wide mode. Since this mode explicitly slaves the odd
counters to the even ones, only instances of the even ones are
defined.
Tested with tests/drivers/counter/counter_basic_api on SAMD21.
Signed-off-by: Derek Hageman <hageman@inthat.cloud>
This commit adds the default configuration to the flash_simualtor
to allow unaligned reads.
Disable this option when testing to increase test coverage.
Signed-off-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
This driver introduces pinmux configuration capabilities
using zephyr apis for XEC SOCs.
Signed-off-by: Francisco Munoz <francisco.munoz.ruiz@intel.com>
Allow further extention of counter API by replacing count_up bool in
the structure with u8_t flags where one bit is used for count up
feature.
Change is not breaking API as count up property is read using
counter_is_counting_up() that didn't change.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added a new runtime parameter to the Flash Simulator. It can be used to
ignore part of the data that is written to the simulated flash memory.
This parameter works together with max write calls parameter.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Added a new runtime parameter to the Flash Simulator. It can be used to
ignore erases to the simulated flash memory after a certain number
of flash erase calls has been executed.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Kconfig symbols I2C_STM32_V1 and I2C_STM32_V2 depends on SoC reference
and user should not have the possibility to choose one or the other.
Remove prompt on these symbols.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
It is recommended that multibyte (burst) transfers are used to read
acceleration and temperature data. This ensures the data is concurrent
and complete.
Signed-off-by: Brett Witherspoon <spoonb@cdspooner.com>
There was a missing break at the end of the high speed setup case,
so it would always return -ENOTSUP even when the high speed baud
was available.
Signed-off-by: Derek Hageman <hageman@inthat.cloud>
This commit consolidates the temperature conversion into a single
location and subtracts the bias from the measurement using values from
the datasheet. Also magic numbers have been replaced with more
descriptive macros.
Signed-off-by: Brett Witherspoon <spoonb@cdspooner.com>
This driver uses magic numbers which are incorrect. A correct conversion
is done using the LSB/g scale factors given by Table 1 in the
specifications section of the ADXL362 (Rev. F) datasheet. The entire
conversion has also been consolidated into a signal function.
The sensitivity and offset of the accelerometer values actually vary
with the supply voltage and temperature. Using datasheet provided values
for 25 C and 2.0 V is the best we can do. Users will need to apply
sensitivity and offset corrections for their application.
Signed-off-by: Brett Witherspoon <spoonb@cdspooner.com>
The return code check and error return on the interrupt register
configuration function call should be included in the #if defined
region.
Fixes#16159
Signed-off-by: Brett Witherspoon <spoonb@cdspooner.com>
On STM32 series currently available in Zephyr,
LPUART and U(S)ART IPs are similar and share most of their
registers. As a consequence LL API defined for U(S)ART also
applies to LPUART.
This allows to remove specific LPUART code.
Restrict use of LL LPUART API when it diverges from UART one.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The legacy PCI support in the DesignWare I2C driver is replaced with
the new PCIe support. The Intel Quark X1000 SoC and the galileo board
configurations are updated accordingly.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The 50-odd lines of boilerplate per I2C port is moved into a template
which is generated by CMake as needed at build-time.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The second serial port (UART_1) can be used for connecting to
host serial port. This is used for example by PPP (Point-to-Point
Protocol) implementation in which case the pppd running in Linux host
connects to a pty that is linked to UART_1 in Zephyr.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The u-blox SARA-R4 modem modules are Ultra-compact LTE Cat
M1 / NB1 ready:
- Configurable with a single hardware version
- Flexible mode selection as LTE Cat M1, LTE Cat NB1, EGPRS -
only/preferred
- Low power consumption and longer battery life
- Extended range in buildings, basements, and with NB1,
underground
This driver introduces support for basic AT commands to
query modem information as well as socket connection
for TCP/UDP communication.
Signed-off-by: Michael Scott <mike@foundries.io>
The WNC-M14A2A shield configuration has HW specific settings in place.
We can remove those settings here.
Signed-off-by: Michael Scott <mike@foundries.io>
Assert is checking the array size of pinconfig. Not the actual
size of the structure.
Fixes issue reported by Github User @weinholtendian
Signed-off-by: Michael Scott <mike@foundries.io>
Caller will handle freeing packet if error is encountered.
Fixes issue reported by Github User @weinholtendian:
<err> net_pkt: *** ERROR *** pkt 0x20027e78 is freed already
by offload_sendto():1717 (context_sendto():1473).
Signed-off-by: Michael Scott <mike@foundries.io>
https://github.com/zephyrproject-rtos/ci-tools/pull/65 tweaks the check
for references to undefined Kconfig symbol to whitelist anything on the
form 'CONFIG_FOO_*' (or 'CONFIG_FOO_*_...'). This is meant for #endif
comments that talk about many related symbols.
Fix two existing #endif comments to use that format, so that some
entries can be removed from the whitelist in the CI check.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The value of GPIO_INT_ACTIVE_LOW is 0, so the bit checking if statement
is never executed. Use GPIO_INT_ACTIVE_HIGH when checking this bit.
Fixes#16162
Signed-off-by: Brett Witherspoon <spoonb@cdspooner.com>
If reception was longer than rx timeout, UART_RX_RDY event
would provide data with delay, and synchronise at buffer end.
This change makes sure that all data is given to user when timeout
occurs.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
MHU (Message Handling Unit) enables software to raise interrupts to
the processor cores. It is enabled in SSE 200 subsystems.
This patch aims to implement inter processor communication.
Signed-off-by: Karl Zhang <karl.zhang@linaro.org>
Add LiteX interrupt controller driver and bindings for this device.
Signed-off-by: Filip Kokosinski <fkokosinski@internships.antmicro.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
Add LiteX timer driver with bindings for this device.
Signed-off-by: Filip Kokosinski <fkokosinski@internships.antmicro.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
Add LiteX UART driver with bindings for this device.
Signed-off-by: Filip Kokosinski <fkokosinski@internships.antmicro.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
Reduced Kconfig for counter with nRF TIMER and RTC. Added overlays
for TIMER and RTC configuration in the counter test.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Hygiene: We don't query MPtables (anymore?), so the related definitions
in the local APIC driver are unused. Removed.
Signed-off-by: Charles Youse <charles.youse@intel.com>
Add support for CLKOUT source selection and divider as found on the
NXP Kinetis KE1xF SoC series.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add support for NXP MCUX LPUART devices with separate IRQ lines for
transmit and receive status interrupts (e.g. the Kinetis KE1xF SoC
series).
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add a new clock control driver for NXP Kinetis SoCs that have the
Peripheral Clock Controller module (PCC).
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Without first triggering TASKS_STOP{RX,TX}, I observed that the UARTE
was never disabled when using device_set_power_state which resulted in
the HFCLK never being shut down and several hundred microamps in
unnecessary current consumption when idle. This seems to fix the issue.
Also added special treatment of uarte if CONFIG_UART_ASYNC_API is
selected. Note that the #ifdef isn't enough, since it's possible that
the option is set, but only one of the UARTs uses it.
Signed-off-by: Benjamin Lindqvist <benjamin.lindqvist@endian.se>
Added a new runtime parameter to the Flash Simulator. It can be used to
ignore any writes to the simulated flash memory after a certain number
of flash write calls has been executed. This behaviour is useful for
simulating power down during the flash write operation.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Clear status bits before mapping them to the interrupt pin, so the
interrupt will occur on the next event instead of a pending event. Also
the status bits are cleared independently, because the threshold and
data ready functions can be enabled simultaneously.
Signed-off-by: Brett Witherspoon <spoonb@cdspooner.com>
Enabling and disabling the GPIO callbacks is error prone and unnecessary
since the trigger data is protected with a mutex, so it has been
removed. This resolves the following issues:
- The GPIO callbacks are not being re-enabled properly in the error path
of the trigger setting function.
- The device pointer used in the GPIO callback to retrieve the ADXL362
driver configuration data is the GPIO device not the ADXL362 device,
so this cast is invalid and the int_gpio field is garbage.
- There are potential timing issues between enabling interrupts and
re-enabling the callbacks.
Signed-off-by: Brett Witherspoon <spoonb@cdspooner.com>
ieee802154_nrf5 checks if IEEE802154_DRIVER_LOG_LEVEL is set to debug
before initializing the "nRF5 rx stack". This leads to an undefined
reference error in case of the LOG module being disabled.
Avoids this behavior by using the LOG_LEVEL macro and setting it as
LOG_LEVEL_NONE in case of IEEE802154_DRIVER_LOG_LEVEL not defined.
Signed-off-by: Joao Cordeiro <jvcc@cesar.org.br>
The filenames of the can drivers were not consisten.
Changed them to can_<dev name>
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
This commit implements a CAN loopback device. This device is used
for testing when no CAN controller is available on the hardware.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
can_attach_workq is an isr wrapper that puts a work item into a workq
whenever a received frame matches the filter. With this function it is
possible to have a callback that is offloaded. This is useful if the
work is too complex for an isr or USERSPACE is enabled.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
can_attach_msgq can be implemented as a wrapper of can_attach_isr.
This is implemented as a common function for all drives and reduces
the complexity of the specific drivers. Since this is common to
multi instances of drivers too, it is removed from the API struct.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
This commit extends the CAN api can_send function by an argument
that is passed to the isr callback.
With this extension it is possible to distinguish between sent masseges
when they use the same callback.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
This commit extends the CAN api attach_isr function by an argument
that is passed to the isr callback.
With this extension it is possible to distinguish between filter matches
when they use the same callback.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Libraries that use mbedTLS have been invoking
zephyr_link_interface(mbedTLS). It is not clear what the intent of
this code has been, but it is redundant with the mbedTLS build
scripts, so it can be safely removed.
In addition to being redundant, it causes problems as it introduces an
ordering dependency, with this code mbedTLS must be declared before
users of mbedTLS are declared. Since this code is redundant, this
ordering dependency is also unnecessary.
This code is believed to have been added early on by accident and
copied through cargo-cult programming since.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Change the SimpleLink wifi driver to use static IP address instead of
DHCP when it is set by NET_CONFIG_MY_IPV4_ADDR. We also support setting
gateway and netmask via NET_CONFIG_MY_IPV4_GW and
NET_CONFIG_MY_IPV4_NETMASK.
This feature is tested out-of-tree against the echo sample after
modifying its prj.conf file to set the static IP address:
CONFIG_NET_CONFIG_MY_IPV4_ADDR="192.168.1.191"
and after commenting out these lines in its board-specific config
file for cc3220sf_launchxl:
so that the NET_CONFIG_SETTINGS are not overridden.
The wifi sample is also verified to run correctly after running the
echo sample.
Fixes#14588
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
Bits are actually shifted by filter number instead of bank number.
This results in wrong mode and filter_index calculation.
Fix shifting of mode bits by using bank_number instead of filter_number.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
usb_dc_mcux_ehci driver is one shim of the NXP SDK ehci driver.
select NOCACHE_MEMORY if HAS_MCUX_CACHE
Signed-off-by: Mark Wang <yichang.wang@nxp.com>
Adds a new xec gpio driver that can be used with the
XEC MCUs. This driver modifies the PCR1 register in order
to configure gpio settings. Interrupts are triggered by the EC
interrupt aggregator block.
Signed-off-by: Francisco Munoz <francisco.munoz.ruiz@intel.com>
Commit 11295c1 added Kconfig options for interrupt mode, but then hard
coded the interrupt mode. This commit uses the Kconfig option to set
the interrupt mode.
Applications expecting the interrupt mode to be something other than
the default will need to be updated.
Signed-off-by: Brett Witherspoon <spoonb@cdspooner.com>
The default case of the switch statement jumps over the unlocking of the
trigger mutex. This has been fixed with more granular locking which has
the added benefit of being more explicit about what is being protected.
Signed-off-by: Brett Witherspoon <spoonb@cdspooner.com>
The upper limit of the timeout should not be 0.
tests/drivers/watchdog/wdt_basic_api checks for this and fails as the
driver currently only checks that the timout does not exceed the upper
bound.
This also makes it check the lower bound, so that the test passes.
Signed-off-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
If top value is different than maximal top value (24 bits) then
wrapping must be handled. There are 2 ways to handle that:
- in software, by clearing the counter in the interrupt
- by HW, using (D)PPI which connects compare event with clear task
First option was already implemented but it has accumulative error.
Added PPI option which requires 1 PPI channels but has no accumulative
error.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This commit adds driver support for ADC1 on all 8 supported series of
stm32 with resolution and conversion time selection and calibration.
Currently DMA is not supported for all series, and without it, zephyr
won't be able to catch up ADC's end of conversion interrupt, so this
version of the driver supports one channel conversion only. Users want
multi-channel conversion should use multiple sequences in their app
code.
This driver uses LL lib rather than HAL because the current HAL lib for
ADC will call HAL_DMA_* functions rather than using zephyr's common DMA
interface, so that way the driver will break the consistency of the
code.
This driver has been tested on multiple nucleo boards including
NUCLEO_F091RC/F103RB/F207ZG/F302R8/F401RE/F746ZG/L073RZ/L476RG and all
passed the test cases in tests/drivers/adc/adc_api. If the external ADC
line is floating, it may fail the tests since ADC may get 0V and the
test cases think 0 is failing. Connect it to any voltage source between
0-3.3V will help passing the test cases.
Signed-off-by: Song Qiang <songqiang1304521@gmail.com>
This commit adds pinmux defines for all the external ADC lines
supported by stm32. All defines are named after the datasheet of the
corresponding product lines.
Signed-off-by: Song Qiang <songqiang1304521@gmail.com>
The HT16K33 is a memory mapping, multifunction LED controller
driver. The controller supports up to 128 LEDs (up to 16 rows and 8
commons) and matrix key scan circuit of up to 13x3 keys.
This commit adds support for the keyscan functionality of the HT16K33.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
The HT16K33 is a memory mapping, multifunction LED controller
driver. The controller supports up to 128 LEDs (up to 16 rows and 8
commons) and matrix key scan circuit of up to 13x3 keys.
This commit add support for the LED driver functionality of the
HT16K33.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Some applications using DMA, such as UART RX, could
need to complete the current DMA transaction earlier than
predefined, based on other termination conditions,
like UART's IDLE interrupts.
In that case, the client needs to know how many data are
still left in DMA transfer buffer so that it can figure
out how many data has been transfered. However, the current
DMA API doesn't provide any information for the client
to learn the transfer buffer information.
And some other information, like whether DMA transfer is busy
or not, transfer direction, etc, could interest a client.
So, added a dma API function to retrieve the current DMA
runtime status.
And implemented the API for STM32F4's DMA while keeping
others unimplemented.
Signed-off-by: Jun Li <jun.r.li@intel.com>
This adds interrupt support to the SAM0 GPIO driver. This is heavily
inspired by @nzmichaelh work in #5715. The primary difference
from that implementation is that here the External Interrupt
Controller (EIC) is separated out into an interrupt controller driver
that is less tightly coupled to the GPIO API. Instead it implements
more of a conversion from the EIC's own odd multiplexing to a more
traditional port and pin mask IRQ-like callback. Unfortunately,
through the EIC on the SAMD2x are relatively well behaved
in terms of pin to EIC line mappings, other chips that share the
peripheral interface are not. So the EIC driver implements a
per-line lookup to the pin and port pair using definitions extracted
from the ASF headers.
The EIC driver still makes some assumptions about how it will be used:
mostly it assumes exactly one callback per port. This should be fine
as the only intended user is the GPIO driver itself.
This has been tested with some simple programs and with
tests/drivers/gpio/gpio_basic_api on a SAMD21 breakout and an
adafruit_trinket_m0 board.
Signed-off-by: Derek Hageman <hageman@inthat.cloud>
This adds a SERCOM I2C driver for SAM0 series chips.
Tested with a SAMD21 chip on a SSD1306 display and a MLX90393
sensor. Only compile tested for SAMD20 and SAMR21.
Signed-off-by: Derek Hageman <hageman@inthat.cloud>
The approved trademark name is Wi-Fi so update references to WiFi and
other spellings to Wi-Fi in documentation and Kconfig help strings.
(Note that use of spelling variatios of "wifi" in module names, CONFIG
names, link names and such are untouched.)
https://www.wi-fi.org/
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Implement newly introduced `configure` API for nRF 802154 radio driver.
Increase maximum number of slots for Frame Pending bit information in
the radio driver.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Mark the PPI channels and groups used by the Bluetooth controller
as occupied and thus unavailable for allocation through nrfx_ppi.
Add also a build time assertion that checks if these PPI channels
do not overlap with those assigned to the pwm_nrf5_sw driver
(to replace the comments in this driver that were supposed to warn
about this threat but had in fact little chance to be read by users).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Return -EAGAIN on k_sem_take() failure to take write lock, the error
code is similar to nrfx write_in_progress flag.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
If a UART is configured with IRQ == PCIE_IRQ_DETECT, then use the
pcie_wired_irq() to determine the IRQ at runtime, and install the
handler using the dynamic interrupt mechanism.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The per-UART configuration is boilerplate that is becoming a maintenance
nightmare as it grows. A template file is created, and instances are
created as needed by cmake at build time.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Firmware is supposed to set a register in PCI configuration space which
indicates the hardware IRQ that the endpoint is attached to.
A function is implemented which reads this register, and the PCIe shell
is updated to use it instead of doing it "manually".
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Add initial support for the TI CC13x2 / CC26x2 series with the CC2652R
and CC1352R SoCs. The UART and GPIO peripherals are supported. Drivers
use the driverlib HAL from the TI CC13x2 / CC26x2 SDK.
Signed-off-by: Brett Witherspoon <spoonb@cdspooner.com>
When some header are included into C++ source file, this kind of
compilations errors are generated:
error: invalid conversion from 'void*'
to 'u32_t*' {aka 'unsigned int*'} [-fpermissive]
Signed-off-by: Benoit Leforestier <benoit.leforestier@gmail.com>
Implementation of pinmux for the stm32mp157c_dk2 board.
Some UART pin mux definition has been added (mainly for
UART console and UART/SPI Arduino shield support).
This can be completed with pin mux for other stm32mp157c
UART.
Signed-off-by: Yaël Boutreux <yael.boutreux@st.com>
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Move SERCOM peripherals to use the raw defines generated from DTS
parsing. This adds aliases to the DTS so that the SERCOM number
can still be used for clocking and pinmux.
Signed-off-by: Derek Hageman <hageman@inthat.cloud>
This adds support for the SAM0 DMA Controller (DMAC). Chained
transfer are not currently implemented.
Tested with tests/drivers/dma/loop_transfer and custom modifications
to that test using three parallel reloading channels. Also tested
with a trivial program that did memory->serial.
Signed-off-by: Michael Hope <mlhx@google.com>
[hageman@inthat.cloud: Rebased and updated commit message]
Signed-off-by: Derek Hageman <hageman@inthat.cloud>
The PR removes the exclusive limit on enabling both UART_ASYNC_API
and UART_INTERRUPT_DRIVEN so that both options can be enabled
together for same uart driver.
Also, the interrupt handler will be used for both cases. So, enable
definition of interrupt handler for both.
However, nRF UART driver still wants to enable only one of them.
So, a new config is added to disable the code for UART_ASYNC_API
when the option UART_INTERRUPT_DRIVEN is enabled.
Signed-off-by: Jun Li <jun.r.li@intel.com>
Extended the maximum possible number of sections that track statistics
for each flash page.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
IRQ_CONNECT and irq_enable calls in the SiFive UART driver were
misconfigured when the conversion to DeviceTree support occurred.
See also: https://github.com/zephyrproject-rtos/zephyr/pull/10613
Signed-off-by: Sören Tempel <soeren+git@soeren-tempel.net>
This adds support for the async API for SAM0 SERCOM SPI using
DMA to drive the device. This implementation does the reload
for both transmit and receive in the receive DMA handler.
Doing this simplifies the implementation but means that the
transmit drains completely, resulting in the SPI clock pausing
between buffers while both are reloaded in the receive handler.
Tested with tests/drivers/spi/spi_loopback and several simple
programs monitored with a logic analyzer.
Signed-off-by: Derek Hageman <hageman@inthat.cloud>
A new function pcie_irq_enable() is added to be used in lieu of
irq_enable() when the target device is PCI(e)-attached. The function
attempts to use MSI, when configured in the kernel and supported by
the endpoint; failing that, it will verify that IRQ requested is in
fact routed to the device by the boot firmware before enabling it.
The NS16550 UART driver is updated to use pcie_irq_enable().
The PCI(e) shell is extended to dump information about wired IRQs.
The up_squared devicetree is fixed (reverted?) to IRQ5 for UART1.
The galileo enables MSI by default.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Add a Kconfig option to enable DMA for SPI with SOC_NRF52832 as long as
it being disabled due to Product Anomaly Notice (PAN) 58 is explicitly
overridden. This allows the SPIM driver to be enabled for the nRF52832
SoC for situations where PAN 58 is not a problem.
Signed-off-by: Andrew Fernandes <andrew@fernandes.org>
Adds Atmel SAMR21 soc which is based on SAMD21, but with a AT86RF233
radio connected internally via SPI.
The AT86RF233 is not yet supprted by Zephyr at this point.
This code is very much copy & paste from atmel_sam0/samd21
Signed-off-by: Benjamin Valentin <benpicco@googlemail.com>
The upipe specific configuration options are selectable unconditionally.
This commit makes them depend on the upipe driver being enabled.
Signed-off-by: Brett Witherspoon <spoonb@cdspooner.com>
Since STM32_OSPEEDR_VERY_HIGH_SPEED flag is required for all I2S_CK
pins, lets add this to the STM32F4 pinmux header and remove the
duplicates in board files. While we are at it, let's add the missing
pinmux definitions for I2S_2 also.
Fixes: #9028
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
This implements three API functions that are required for
tests/subsys/usb/device to build:
- usb_dc_ep_disable()
- usb_dc_ep_halt()
- usb_dc_ep_flush()
While halt and disable are trivial, flush is just a stub for now.
Signed-off-by: Benjamin Valentin <benpicco@googlemail.com>
Make sure the parameters for the API functions are valid, return error
otherwise.
This is expected by the tests/subsys/usb/device test case.
Signed-off-by: Benjamin Valentin <benpicco@googlemail.com>
Change file naming pattern from BoardNameX_ll_clock.c to
clock_BoardNameX.c
File containing LL functions will have the "_ll_" naming
scheme (such as clock_stm32_ll_common.c and .h)
Signed-off-by: Yaël Boutreux <yael.boutreux@st.com>
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
This is mainly testing purpose from native_posize ethernet
driver. Enable CONFIG_ETH_NATIVE_POSIX_VLAN_TAG_STRIP to have
VLAN tag strip feature on ethernet Rx frames.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
We shall not enable by default a system timer in ARM
platforms, namely the SysTick, the Nordic, or the SAM0
RTC timer, simply by assessing the hardware capabilities
(e.g. by conditioning on CPU_CORTEX_M_HAS_SYSTICK).
Instead, now, all ARM platforms needs to explicitly set
their system timer module. Note that this has already
been the case for ca 80% of the ARM platforms.
This clean-up allows us to decouple HW capabilities from
system configuration (for example, Nordic platforms may
enable option CPU_CORTEX_M_HAS_SYSTICK, and still use
the platform-specific RTC timer for system timing).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit renames the symbol CPU_HAS_SYSTICK to
CPU_CORTEX_M_HAS_SYSTICK, to look similar to all
other CPU_CORTEX_M_HAS_ options, and moves the
K-config symbol definition from arm/core/Kconfig to
arm/core/cortex_m/Kconfig.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
For example it should be possible to compile and use the SLIP module
with NET_L2_DUMMY. This required the following changes:
* Fix a typo in the initializer for struct dummy_api
* Only define eth_capabilities if CONFIG_NET_L2_ETHERNET is defined to
silence a -Wunused-function compiler warning
* Unconditionally include net/dummy.h
Signed-off-by: Sören Tempel <soeren+git@soeren-tempel.net>
Without this change compilation of the SLIP module would fail if LLDP
wasn't enabled. There is also no need to include net/lldp.h explicitly
as net/ethernet.h will include it conditionally if CONFIG_NET_LLDP is
defined.
Signed-off-by: Sören Tempel <soeren+git@soeren-tempel.net>
Enabling the RTC event is intended to support peripheral-to-peripheral
interconnects, so introduces a request for HFCLK and PCLK16M when the
event is triggered. This specific event is never used with PPI so
enabling events apparently does nothing but increase power consumption.
Closes#15513
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Statistic for flash has limitation regards number of pages possible to
be counted. This path introduces check for that in source file as it is
not possible to preserve the limit in Kconfig.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
This commit adds a flash driver implementation that writes to RAM and
exports statistics through stats.h. It can be used to simulate flash
memory for testing purposes.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
When there is no need to divide the PWM clock (i.e. the requested
period cycles fit the 15-bit PWM counter), the prescaler value
should be 0, not 1.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The GPIO driver for the Intel Apollo Lake has so many pins it has to
export ten devices to shoehorn its one device into the GPIO API. The
current implementation uses the shared IRQ driver because these
pseudodevices all share one IRQ. However, since the GPIO driver is
aware of all the possible interrupt sources, it's smaller and faster
(and not even messy) to handle it internally, so this patch eliminates
the dependency on the shared IRQ driver.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Provide access functions for manipulating network interface flags.
There is no need for the caller of this API to know about the inner
details of the flags.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Migrate from "legacy" PCI support (drivers/pci) to new PCI(e) support.
The e1000 driver is merely for testing with QEMU and so should not be
a model for the use of PCI(e) functions. Consult instead "real-world"
PCI(e) drivers like the NS16550 UART (drivers/serial/uart_ns16550.c).
Signed-off-by: Charles Youse <charles.youse@intel.com>
Make sure that when e.g. CONFIG_SERIAL is set, CONFIG_UART_SAM0 is
selected automatically when the sam0 SoC family is used.
Signed-off-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Add GPIO support to stm32wb series.
Only ABCDE and H ports are available for now on this series.
Accordingly, update series dtsi file.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add support to stm32wb series in stm32 clock_control driver.
Ip is similar to stm32l4 one but AHB bus presacler is renamed
to "CPU1" and CPU2 and AHB4 prescalers should be defined.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Implementation of AMS (Austria Micro Systems) ENS210 temperature and
relative humidity sensor.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
In order to generalize the currently specialized nRF51 IC setup hook,
make the following changes:
- Generalize the hook to bt_ic_setup()
- Use a weak NOP version by default
- Move the currently existing one to the board folder
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
nRF9160 can't provide FICR data while operation in non-secure
domain.
This patch start using flash layout properties provides by
nrfx API for get flash properties, which resolves problem
described above.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Introduce nrfx_nvmc driver into nordic flash driver implementation.
Thanks to that nrf9160 SoC becomes supported by the driver.
nrfx helps dealing with differences with interface to the NVMC
in secure and non-secure execution modes.
This patch adds NRFX_NVMC Kconfig entry for enabling nrfx_nvmc and
select it along with nordic flash driver.
Disabled UICR operation on nRF9160 for non-secure build
as UICR is not available in this mode.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Add driver support for Atmel SAM0 device ID, which is 16-bytes long.
The device ID can simply be read from memory at a known location, but
the location is only described in the data sheet, not in ASF.
For SAMD2x it's 0x0080A00C, 0x0080A040, 0x0080A044 & 0x0080A048.
For SAMD5x it's 0x008061FC, 0x00806010, 0x00806014 & 0x00806018.
This adds a new property to the device tree to define the device ID
registers for this SoC family.
Signed-off-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Added option to have LFCLK synthesized from HFCLK. It is not low
power but ensures constant relation between HFCLK and LFCLK and
might be useful in certain scenarios (e.g. testing).
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add driver and device tree binding for the Low Power Inter-Integrated
Circuit (LPI2C) controllers found in the RV32M1 RI5CY SoC.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Use the RV32M1 SoC intmux driver initialization priority set by
Kconfig. Change the default to match the default value of 40 used
before.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
I does make sense to use index only after we make sure it is valid,
issue is found in harness tests.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
In stereo case the pdm stream continuosly alternates 1-bit from
the left channel with 1-bit from the right channel. In this case
we need first to demultiplex channels bits on byte basis.
Then the Open_PDM_Filter library has to be called twice, one for
each channel.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
This commit adds CAN support for nucleo F746zg.
Furtermore CAN was added in stm32f7.dtsi and pinmuc_stm32f7.h
CAN_RX: PD0, CAN_TX: PD1
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Add support for pulsing the hardware reset pin of the FXOS8700 high
during initialization.
According to the datasheet, this is required for the I2C/SPI bus
auto-detection logic to work properly if the VDD/VDDIO power
sequencing order cannot be guaranteed.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
gpio_intel_apl_read() should set *value to 1, not 2, when the
GPIO input is a logical high.
Fixes: #15499
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
For STM32L47x/48x series devices, register ASCR should be configured to
connect analog switch of gpio lines to the ADC.
Signed-off-by: Song Qiang <songqiang1304521@gmail.com>
Allows to enable initial RTS/CTS hardware flow control
in the dts.
Co-authored-by: Benoit Leforestier <benoit.leforestier@gmail.com>
Signed-off-by: Georgij Cernysiov <g.cernysiov@elco-automation.de>
Reformat L4 pinmux to be consistent with other pinmux files,
and for a better reading.
Signed-off-by: Georgij Cernysiov <g.cernysiov@elco-automation.de>
Fixed using chipselect with seperate chipselect GPIOs and how they were
referenced from/in DeviceTree.
Also configure the device during initialization so it's ready to go
after init.
Signed-off-by: Karsten Koenig <karsten.koenig.030@gmail.com>
Adjusted the MCP2515 driver to switch from KConfig SPI configuration to
DTS based configuration.
Signed-off-by: Karsten Koenig <karsten.koenig.030@gmail.com>
The MCP2515 is a CAN controller that can be connected via SPI to an
host MCU. This driver adds support for the MCP2515 as a new driver in
the CAN subsystem.
As it is a SPI peripheral it uses a thread for its interrupt
handling and the received message filtering is done inside this
interrupt thread, as the MCP2515 filter capabilities are not sufficient
for the Zephyr CAN interface.
The driver was validated with an external CAN logger and the adjusted
CAN sample application.
Signed-off-by: Karsten Koenig <karsten.koenig.030@gmail.com>
The following fix:
commit c8b17ec403
Author: Tobias Aschenbrenner <tobias.aschenbrenner@blik.io>
Date: Tue Dec 18 14:16:00 2018 +0100
fix: kw41z: Use correct mapping for dBm
Was using SYS_LOG_INFO and should be using LOG_INFO.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
A parallel PCI implementation ("pcie") is added with features for PCIe.
In particular, message-signaled interrupts (MSI) are supported, which
are essential to the use of any non-trivial PCIe device.
The NS16550 UART driver is modified to use pcie.
pcie is a complete replacement for the old PCI support ("pci"). It is
smaller, by an order of magnitude, and cleaner. Both pci and pcie can
(and do) coexist in the same builds, but the intent is to rework any
existing drivers that depend on pci and ultimately remove pci entirely.
This patch is large, but things in mirror are smaller than they appear.
Most of the modified files are configuration-related, and are changed
only slightly to accommodate the modified UART driver.
Deficiencies:
64-bit support is minimal. The code works fine with 64-bit capable
devices, but will not cooperate with MMIO regions (or MSI targets) that
have high bits set. This is not needed on any current boards, and is
unlikely to be needed in the future. Only superficial changes would
be required if we change our minds.
The method specifying PCI endpoints in devicetree is somewhat kludgey.
The "right" way would be to hang PCI devices off a topological tree;
while this would be more aesthetically pleasing, I don't think it's
worth the effort, given our non-standard use of devicetree.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Enable the clock for GPIO ports on the RV32M1 SoC before attempting to
access the port controller registers.
Fixes: #15339
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
According to documentation Compare event will not be triggered
if CC=0 and CLEAR task is set. Added handling of that situation.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The radio API expects the setting of the TX-power in dBm. The actual
TX-power is however set by a 6bit register, which mapping between
register value and power in dBm is a lookup-table in the datasheet.
This mapping for the kw41z was off, which not only lead to incorrect
output power, but also to a maximal output power of only -1.9 dBm
instead of the possible +3.5 dBm.
Signed-off-by: Tobias Aschenbrenner <tobias.aschenbrenner@blik.io>
Signed-off-by: Franco Saworski <f.saworski@posteo.de>
If the user attempts to send data before the USB connection is
established (see the HID sample for an example of such code), the
DataInCallback never gets called which leaves the write semaphore in a
taken state forever.
Signed-off-by: Josef Gajdusek <atx@atx.name>
The SYSCFG_CFGR1_PA11_PA12_RMP define is present even on packages where
the remap isn't strictly required. This commit makes the remap optional
based on a DT property.
Also fixes syntax error caused by a missing );.
Signed-off-by: Josef Gajdusek <atx@atx.name>
Clearing the pending IRQs when resetting the timeout fixes the
forward time drifting, but the change needs more investigation
until we are sure this won't break kernel time management.
Reverting the change to get 1.14 release out.
This reverts commit 2895da02a4.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
HFCLK may be requested for multiple modules, i.e. Bluetooth stack.
When any other module has requested HFCLK to run, the driver will
return -EBUSY on free attempt which is not an error - thie means
that free request has been processed, but someone else is still
requiring the clock to run. When all clock users free the clock,
it may be disabled.
Related issue: #15145
Signed-off-by: Paweł Zadrożniak <pawel.zadrozniak@nordicsemi.no>
As part of the ll_reserve refactoring effort, the packet length now
includes header size as well. Before the refactor, when the packet
length was written to the device, it did not include the header size,
which is the required value as per the LM3S6965 datasheet. After the
refactor the packet length includes the header size as well. The
header size has to subtracted from the packet length before writing to
the device. Fixes#13943.
Signed-off-by: Vijay Kumar B <vijaykumar@zilogic.com>
In the unlucky scenario of a SysTick event (wrap) occurring
while we re-program the last_load value, the SysTick ISR
will run immediately after we unlock interrupts. In that
case the timeout we have just configured will expire
instantaneously, leading to operations being executed
much earlier than expected. Avoid this by clearing possibly
pending SysTick exceptions (writing 1 to ICSR.PENDSTCLR).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
When the counter reaches zero, it reloads the value in
SYST_RVR on the next clock edge. This means that if the
LOAD value is N, the interrupt ("tick") is triggered
every N+1 cycles. Therefore, when we operate in tickless
mode, and we want to schedule the next timeout, we need
to configure the LOAD value with last_load - 1, in order
to get an event in last_load cycles.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
When the counter reaches zero, it reloads the value in
SYST_RVR on the next clock edge. This means that if the
LOAD value is N, the interrupt ("tick") is triggered
every N+1 cycles. Therefore, when we operate in non-
tickless mode, we need to configure the LOAD value
with CYC_PER_TICK - 1, in order to get an event
every CYC_PER_TICK cycles.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Check maximum packet size (MPS) of an endpoint in usb_dc_kinetis
and usb_dc_native_posix drivers.
resolves#14957resolves#14954
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
The SysTick logic looked logically sound, but it was allowing us to
set a LOAD value as low as 512 cycles. On other platforms, that
minimum future interrupt delay is there to protect the "read, compute,
write, unmask" cycle that sets the new interrupt from trying to set
one sooner than it can handle.
But with SysTick, that value then becomes the value of the LOAD
register, which is effectively the frequency with which timer
interrupts arrive. This has two side effects:
1. It opens up the possibility that future code that masks interrupts
longer than 512 cycles will miss more than one overflow, slipping
the clock backward as viewed by z_clock_announce().
2. The original code only understood one overflow cycle, so in the
event we do set one of these very near timeouts and then mask
interrupts, we'll only add at most one overflow to the "elapsed()"
time, slipping the CURRENT time backward (actually turning it into
a non-monotonic sawtooth which would slip every LOAD cycle) and
thus messing up future scheduled interrupts, slipping those forward
relative to what the ISR was counting.
This patch simplifies the logic for reading SysTick VAL/CTRL (the loop
wasn't needed), handles the case where we see more than one overflow,
and increases the MIN_DELAY cycles from 512 to 1/16th of a tick.
Fixes#15216
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Bad order of interrupt calls made it unable to transmitt data
using interrupt driven API.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This is a leftover license header from when we used a third party
driver that had since been replaced.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Fix build error when executing sanitycheck on stm32 devices.
Command to execute tests:
sanitycheck --device-testing --device-serial /dev/ttyACM0 -p <board>
-t usb
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This macro is slated for complete removal, as it's not possible
on arches with an MPU stack guard to know the true buffer bounds
without also knowing the runtime state of its associated thread.
As removing this completely would be invasive to where we are
in the 1.14 release, demote to a private kernel Z_ API instead.
The current way that the macro is being used internally will
not cause any undue harm, we just don't want any external code
depending on it.
The final work to remove this (and overhaul stack specification in
general) will take place in 1.15 in the context of #14269Fixes: #14766
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Rename reserved function names in drivers/ subdirectory. Update
function macros concatenatenating function names with '##'. As
there is a conflict between the existing gpio_sch_manage_callback()
and _gpio_sch_manage_callback() names, leave the latter unmodified.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
unify the API of CCM alogrithm's implemation for TinyCrypt,
mbedTLS and cc2520 crypto device to make users easy to use.
Fixes#8339.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
We should not be storing the sequence pointer, as
adc_read_async() returns immediately. The memory could
be heap allocated, or on a call stack. Make a copy of
it instead.
Fixes: #15039
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Fixes bug introduced in #14875.
USBDETECTED event is be generated on cable attachment and
when cable is already attached during reset, but not when
the peripheral is re-initialized. When USB-enabled bootloader
is used, target application will not receive this event
and it needs to be generated again. This commit implements
a check against driver being enabled multiple times in case
of application without bootlader starting with cable attached
(both "fake" and "real" events are generated). Such dirty
trick allows bootloader to leave the peripheral in any state
before jumping to target application.
Fixes#15073
Signed-off-by: Paweł Zadrożniak <pawel.zadrozniak@nordicsemi.no>
When building with -fno-inline, the compiler complains about
undefined reference to this function. This happens when
building for code coverage. Since this function is only called
within the file, mark it static also.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Setting callbacks is forbidden from user mode.
Some heavier code changes will be needed to support
adc_read_async(), this patch just exposes the config
and read functions for now.
Test case updated to run partially in user mode.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We want to enable USB DC at not only VBUS detection event
but also it has been already high.
Signed-off-by: Takumi Ando <takumi.ando@atmark-techno.com>
Inside can_stm32_runtime_configure() result of
clock_control_get_rate() is not checked which might result that
function can return error and that error can not be handled
Coverity-CID: 190926
Fixes: #13886
Signed-off-by: Maksim Masalski <maxxliferobot@gmail.com>
When the console UART is a PCI device, and PCI debug logging is enabled,
the system crashes because the UART is initialized before logging, but
the UART initialization invokes the PCI subsystem which invokes logging.
Reordering the initialization sequence will not fix this chicken/egg.
Luckily, the LOG_DBG() calls in the PCI subsystem appear to be bitrot
leftovers from early development, so they are simply removed.
Also mark myself as the owner of the PCI subsystem.
Fixes: #14763
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Plain 'source' is globbing. 'gsource' is a leftover from an older
design, and works as a synonym for 'source'.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Cast ts to u32_t could cause an overflow in that multiplication, since
time_t is 8 bytes it is not necessary to cast the multiplication's
result too.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
When converted to time_t, RTC init date was missing 100 years
offset, as time_t starts in 1900 while RTC starts in 2000.
Besides, tm_mon calculation was wrong by 1 month as allowed range
is 0-11 and provided in range 1-12.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Asyc transceive is currently not implemented for this driver,
so don't claim support.
spi_context_lock() is already being called in spi_sam_transceive()
so calling it in the wrapper function will cause a deadlock.
This reverts eae05d928e
Signed-off-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Add driver support for Atmel SAM device ID, which is 16-bytes long. On
this SoC family, the device ID is part of the flash controller and
complex to read. Therefore the driver reads it once at boot time and
then just returned the copy saved in RAM.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Since commit 0906a51dac, the driver
fails the test: tests/drivers/adc/adc_api. Some of the workflow
turns out to be incorrect (e.g. not doing dummy conversion after
getting out of deep power down, and not clearing interrupt status
bits). So take some time to overhaul the driver. Also rename
the driver to adc_intel_quark_se_c1000_ss because the inner
working of this driver is tied to Quark SE C1000 SoC.
Fixes: #12632
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The logic in sampling is incorrect. The code sets up the hardware
to do multiple conversions, but in reality, each call is simply
one conversion. So fix it.
Fixes#12632
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
In the conversion of net_pkt_read_new to net_pkt_read, we missed
changing the function in the eth_smsc911x and eswifi_offload.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit implements fcntl() in the SimpleLink Wifi driver to set and
get the non-blocking mode on a socket.
Fixes#11891.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
An external project extending the Zephyr RTOS and its drivers may have
subsystems that must use its own specific driver(s) when active. One
example is the nRF5x NVMC that must be scheduled in between radio
operations. A subsystem may also be dependent on its own drivers for
security, real-time and/or because of hardware constrains.
In order to not introduce non-Zephyr specific code into the Zephyr tree,
an option is added to disable the in-tree drivers in Zephyr. Because
Kconfig does not support a good way of de-selecting other symbols, a
variable on the form `<DRIVER>_FORCE_ALT` is added as a
dependency for each `<DRIVER>`. For example, the out-of-tree subsystem
will select `FLASH_NRF_FORCE_ALT` to disable the in-tree driver. A
solution for issue #8181 would open up for a more general solution,
however #8181 requires significant effort.
Support for out-of-tree drivers is added to Nordic drivers for
clock_control, entropy and flash.
A generic solution for this is desired. Issue #14527 is tracking that
progress.
Signed-off-by: Thomas Stenersen <thomas.stenersen@nordicsemi.no>
Some places were still using the old allocator. Using the new one does
not change any behavior. This will help to remove the useless data_len
attribute in net_pkt which legacy allocator was still setting.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This parameter was removed from net_context already thus applying the
change also on net_offload API.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
And also to the relevant callbacks.
That parameter is not used anywhere so it is useless.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that legacy - and unrelated - function named net_pkt_get_data has
been removed, we can rename net_pkt_get_data_new relevantly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that legacy functions are removew, let's rename the new functions by
removing the _new suffix.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Disable the data cache before writing to Flash, in order to workaround
silicon errata 2.2.3: "Data cache might be corrupted during Flash memory
read-while-write operation". The data cache is conditionally re-enabled
once the write is completed.
This silicon bug has been encountered while stress testing the
implementation. Here are the events leading to the fault:
- Code is executing from Flash bank 1
- A write to Flash bank 2 is initiated
- The Cortex SysTick interrupt fires while waiting for Flash write
completion
In that case, the Flash controller will perform a read-while-write
operation in order to execute the ISR code. As the data cache is enabled
by default after reset, a corruption occurs due to the silicon bug,
leading to bizarre data bus faults or unaligned access faults inside
_timer_int_handler() or one of the functions called by the ISR.
Applying the workaround devised by ST fixes the problem.
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
Instead of aborting on RSSI poll error, let's continue on and
reschedule the next RSSI poll.
This fixes an issue where RSSI polling would stop if for any reason
the modem doesn't fulfill an RSSI poll on time.
Signed-off-by: Michael Scott <mike@foundries.io>
Changes in commit 854045c14d ("drivers/modem: Switch wncm14a2a
driver to new net_pkt API") moved WNC-M14A2A modem driver to new
net_pkt APIs. As part of these changes, the values for source and
destination passed into net_ipv6_create() were reversed.
Let's correct them.
Signed-off-by: Michael Scott <mike@foundries.io>
Fix issue #14618.
The I2S controller may generate an underrun/overrun error whenever
the current sample in the Data Register (DR) has not been read/written
yet when a new one needs to be sent/received. When the DMA operation
is completed there is no much time to re-enable it for a new
transfer. For example, in the case of a PDM microphone clocked at
2MHz we only have 8us to re-program the DMA to receive the new 16-bit
sample.
Doing a complete DMA configuration using the dma_config() API is an
operation that is consuming too much time and driver is close to the
limit. Instead, the dma_reload() routine only programs the minimum
needed information (src, dst, len) for the new transfer in order
to restart the DMA.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
The dma_reload() is useful when there's the need to immediately
and quickly restart the DMA for a new transfer when the current
one is completed. If the operation is not done quickly there
might be underrun or overrun errors and the data flow is broken.
The dma_reload() just does the minimum operations required, i.e.
programming the new src/dst addresses and transfer size.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
CONFIG_WDT_SAM_DISABLE_AT_BOOT was removed in commit 2e01e86bdc
("drivers: watchdog: wdt_sam: use the generic disable option"), but some
comments still talked about it. Replace it with
CONFIG_WDT_DISABLE_AT_BOOT.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Refactors the apds9960 sensor driver to get the i2c device name, i2c
device address, gpio device name, and gpio pin from a constant device
configuration structure, rather than using hardcoded macros. This will
make it easier to change the names of the macros and to instantiate
multiple instances of the driver.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Initialize a local struct variable to zero, to suppress
un-initialized variable error.
Fixes#14422.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Following upgrade of newlib version in SDK 0.10.0,
time_t changed from 4 to 8 bytes structure.
As a consequence, ts requires a cast to u32_t before conversion
to us to avoid overflow.
Additionally, add a comment on RTC init value and
fix a minor alignment issue.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Updated to add support for CS. DT config names updated
to adhere to the DTS naming convention. Init and SPI
configuration now follows the device datasheet.
Signed-off-by: Henrik Malvik Halvorsen <henrik.halvorsen@nordicsemi.no>
Appears within an 'if UART_MCUMGR'.
'if FOO' is just shorthand for adding 'depends on FOO' to each item
within the 'if'.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Per #13610, recent changes to this driver seem to have introduced
unexpected latency regressions. This patch effectively reverts these
patches which changed the meat of the driver:
ac36886e62 drivers: nrf: timer: add inline qualifier where
inlining is intended
084363a0dc drivers: timer: nrf: refactor for speed and correctness
71882ff8c4 drivers: timer: nrf: drop unnecessary counter mask
4b24e88fa4 drivers: timer: nrf: use irq_lock instead of spinlock
While backporting these seemingly unrelated hygiene patches:
7cbdb6c5c0 drivers/timer: Restore non-tickless tick count behavior
d30c9aeafd drivers: nrf_power_clock: Migrate to DTS.
75f77db432 include: misc: util.h: Rename min/max to MIN/MAX
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Remove magic numbers from Ethernet drivers and tests by defining
NET_ETH_MAX_DATAGRAM_SIZE and NET_ETH_MAX_FRAME_SIZE.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
On STM32L4, flash writes operations are performed 8 bytes at a time.
Though, it is possible that *data in flash_write functions is not
aligned. To avoid issues, use UNALIGNED_GET macro to access *data.
Issue has been detected using settings subsystem on STM32WB, which has
same 8bytes write block size. The patch is extended to STM32L4 series
for same reason.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
On STM32F3 devices, a trick was required for normal use of registers.
This was actually an issue in flash registers defintions which should
be defined as volatile.
Fix this and additionaly, fix definition for STM32F1 which was also
lacking the volatile instruction.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
When we build with clang we can a warning related to mixing of enum
types. Just use nrfx_usbd_ep_status_t since that is the type returned
by nrfx_usbd_ep_status_get.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The existing device_set_power_state() API works only in synchronous
mode and this is not desirable for devices(ex: Gyro) which take
longer time (few 100 mSec) to suspend/resume.
To support async mode, a new callback argument is added to the API.
The device drivers can asynchronously suspend/resume and call the
callback function upon completion of the async request.
This commit adds the missing callback parameter to all the drivers
to make it compliant with the new API.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Commit fd1401495b ("net/tcp: Move net_tcp_set_hdr() away from net
core") removed <net/tcp.h>. This results in a not found error being
generated when CONFIG_NET_TCP is enabled.
We also, don't need to include <net/udp.h> anymore due to new
net_pkt API changes.
Let's clean up the includes by removing both of them.
Signed-off-by: Michael Scott <mike@foundries.io>
Socket-based API sends timeout K_FOREVER(-1) to net_context_connect()
function where previously net_app APIs used an actual timeout value.
Now that we've switched to socket-based APIs, we reveal poor handling
for the timeout value which causes an error in the WNC-M14A2A driver
due to math performed on the -1 value.
Let's be sure to check for valid timeout values prior to performing
math and then make sure it falls within the allowable range of values
for the AT@SOCKCONN command (30 seconds to 360 seconds).
Signed-off-by: Michael Scott <mike@foundries.io>
In commit c1f24abb13 ("drivers: modem: wistron kconfig separation"),
A single line of the WNC-M14A2A congigs was left in the main modem
Kconfig.
Let's clean up the Kconfig file by removing the left over.
Signed-off-by: Michael Scott <mike@foundries.io>
CONFIG_GPIO may not be enabled on some HW, so let's make sure to
enable it if the dependencies are met, as the WNC-M14A2A driver
needs to set power, reset and other GPIOs.
Signed-off-by: Michael Scott <mike@foundries.io>
This is intended to initialize CPU-local timer devices, but HPET is
global so we have nothing to do.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
mqtt_client_tls_connect() calls setsockopt() to set the TLS_PEER_VERIFY
option to require verfication. To enable mqtt, we need to return
success at a minimum when this option is set to 2.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
The driver is not returning correct error codes when error occurs.
The error handling function is expecting negative input values, but
that is not true for BSD error codes. So I am taking an approach
where I use a function to convert SimpleLink error codes to BSD
error codes, and call slcb_setErrno() to set the errno independently.
Fixes#12745
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
Fix an out of bound access in the native_posix uart driver,
when generating the string to autoattach a terminal to the UART.
(The space for the null termination was missing)
Fixes: #14401
Coverity issue CID: 195855
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
fcntl() may (very unlikely) fail when setting the new pseudoterminal
to non-blocking.
Let's check for this condition, handle it, and in the process
silence a coverity issue.
Fixes#14396
Coverity CID: 195872
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
When user disconnects the USB cable, peripheral should be
immediately disabled, howewer a delay may occur when driver
events are processed from a workqueue or higher-priority
thread/ISR is active. This may lead to a fake resume/reset
event (peripheral-specific behavior). This fix drops such
events when cable is detached.
Fixes#13822
Signed-off-by: Paweł Zadrożniak <pawel.zadrozniak@nordicsemi.no>
Ensure that no I2C start condition is inserted between messages of
a same transfer, except if explicitely requested (restart flag).
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Ensure that no I2C start condition is inserted between messages of
a same transfer, except if explicitely requested (restart flag).
This fix issue with I2C register write functions.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Maybe this is some "just in case" thing that got copied around. There's
no need to have a blank line at the beginning or end of Kconfig files.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Removing the TX timeout handling in the GMAC driver (commit 18b07e09e0)
revealed some issues with the way hardware priority queues work.
For cases with both hardware priority queues enabled, with the default
recommended delta bandwidths (0% - 75%), the lower priority queue (0%)
is hardly able to send any packets. This became visible, because without
the timeout mechanism, we quickly ran out of available TX buffers if
there were multiple packets being queued to the queue.
Here is an excerpt from 802.1Q, chapter 34.3.1 which describes how Qav
bandwidth sharing SHOULD work:
The deltaBandwidth(N) for a given N, plus the deltaBandwidth(N) values
for any higher priority queues (larger values of N) defines the total
percentage of the Port’s bandwidth that can be reserved for that queue
and all higher priority queues. For the highest priority queue, this
means that the maximum value of operIdleSlope(N) is deltaBandwidth(N)%
of portTransmitRate. However, if operIdleSlope(N) is actually less
than this maximum value, any lower priority queue that supports the
credit-based shaper algorithm can make use of the reservable bandwidth
that is unused by the higher priority queue. So, for queue N-1, the
maximum value of (operIdleSlope(N) + operIdleSlope(N-1)) is
(deltaBandwidth(N) + deltaBandwidth(N1))% of portTransmitRate.
However in reality, the lower priority queues (N-1) on the SAM GMAC
hardware DO NOT use the bandwidth available from the higher priority
queues (N).
This commits fixes the issue by changing the defaults. These are still
set to the recommended 75% (total), but this percentage is split between
the priority queues manually.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
There is a log message printed for the non-priority queue (Queue 0). Add
the same message for the priority queues too when they are enabled, and
a corresponding message when the queue is not used (set to idle).
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Throughout the manual, the queues GMAC is equipped with are identified
by a number - Queue 0, Queue 1 and Queue 2.
However in the context of Qav, the queues are identified with a
character (note that there are only two queues as Qav is not used for
the non-priority queue) - Queue A and Queue B.
Queue B and Queue 2 are also called "the highest priority queues".
Based on that, the previous implementation was using the following
mapping:
Queue 1 - Queue A
Queue 2 - Queue B
However when running some specific tests, that is for example forcing
all the traffic to Queue 1, it showed that this queue is actually
affected by the Queue B registers. Similarly, Queue 2 seems to be
affected by the Queue A registers.
Based on that observation, this commit changes the registers used to
work with the following mapping:
Queue 1 - Queue B
Queue 2 - Queue A
Note that this is based solely on observations, there is nothing in the
datasheet that confirms this, and the "highest priority" label suggests
it is otherwise.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
This option is meant to be used only for debugging. Use it to force all
traffic to be routed through a specific hardware queue. With this option
enabled it is easier to verify whether the chosen hardware queue
actually works.
This works only if there are four or fewer RX traffic classes enabled as
the SAM GMAC hardware supports screening up to four traffic classes.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
The interface name is IFNAMSIZ long so we must not copy it
full which would overwrite the terminating null byte.
Coverity-CID: 195770
Fixes#14419
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add choice variables for CLOCK_CONTROL_NRF_SOURCE and
CLOCK_CONTROL_NRF_ACCURACY such that the choices may be augmented
out-of-tree.
Signed-off-by: Thomas Stenersen <thomas.stenersen@nordicsemi.no>
Redefining the config will not let another (out-of-source) driver be
chosen instead of the default. The driver is practically forced by the
soc settings. This commit moves default settings from soc/arm/nordic_nrf
into the drivers themselves.
Signed-off-by: Thomas Stenersen <thomas.stenersen@nordicsemi.no>
Remove use of select to "force" enabling other configs in subsys/fs
and subsys/net/l2. The forcing will cause infinite kconfig recursion.
Signed-off-by: Thomas Stenersen <thomas.stenersen@nordicsemi.no>
1. Kconfig option Clock prescaler removed.
2. Modified pwm_nrf5_sw.c driver to use DT
defines instead of Kconfig, and also use new
DT options (timer, ppi/gpiote, etc).
3. Cleanup some code.
Signed-off-by: Gaute Gamnes <gaute.gamnes@nordicsemi.no>
1. Remove nrf_common.h include
2. Remove unnecessary NRF_*Type defines, using
CMSIS NRF_TEMP define directly instead.
3. Align driver code by including DEVICE_DECLARE,
and moving DEVICE_AND_API_INIT() to the bottom.
Signed-off-by: Gaute Gamnes <gaute.gamnes@nordicsemi.no>
In zephyr drivers should always use u32_t.
Using uint32_t here generates issues in the CI when NEWLIB_LIBC
is defined.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
The change in commit e5349d74ab
results in only one resource being returned for a device with
pci_bus_scan(). The root cause for that issue was actually
because of wrapping around when scanning through BARs, where
BARs were scanned 0->1->2->..->6->0->1->.. in an endless loop
for a single bus:dev.function. So revert that commit and put
in a fix by moving on to the next function after going
through all the BARs.
Fixes#1550
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Update reserved function names starting with one underscore, replacing
them as follows:
'_k_' with 'z_'
'_K_' with 'Z_'
'_handler_' with 'z_handl_'
'_Cstart' with 'z_cstart'
'_Swap' with 'z_swap'
This renaming is done on both global and those static function names
in kernel/include and include/. Other static function names in kernel/
are renamed by removing the leading underscore. Other function names
not starting with any prefix listed above are renamed starting with
a 'z_' or 'Z_' prefix.
Function names starting with two or three leading underscores are not
automatcally renamed since these names will collide with the variants
with two or three leading underscores.
Various generator scripts have also been updated as well as perf,
linker and usb files. These are
drivers/serial/uart_handlers.c
include/linker/kobject-text.ld
kernel/include/syscall_handler.h
scripts/gen_kobject_list.py
scripts/gen_syscall_header.py
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Use LL drivers instead of HAL driver because LL driver is available
for all soc while HAL driver is not.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Use the generic option WDT_DISABLE_AT_BOOT instead of the SAM specific
one WDT_SAM_DISABLE_AT_BOOT (note the generic one has been introduced
after the SAM one).
This also have the consequence of changing the default value for yes to
no, fixing the watchdog tests.
Fixes#13290
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
* Registration of interrupt context callbacks from user mode
is forbidden.
- Remove can_attach_isr() as a system call
- Enforce that can_send() has a NULL callback parameter
* k_msgq are kernel objects that do not live in user memory.
Fix the checks for it in can_attach_msgq().
* CAN API documentation was with the API struct typedefs and
not the actual APIs. Moved.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
drivers/pwm/Kconfig.esp32 is 'source'd within an 'if PWM' in
drivers/pwm/Kconfig.
'if FOO' is just shorthand for adding 'depends on FOO' to each item
within the 'if'. Dependencies on menus work similarly. There are no
"conditional includes" in Kconfig, so 'if FOO' has no special meaning
around a source. Conditional includes wouldn't be possible, because an
if condition could include (directly or indirectly) forward references
to symbols not defined yet.
Tip: When adding a symbol, check its dependencies in the menuconfig
('ninja menuconfig', then / to jump to the symbol). The menuconfig also
shows how the file with the symbol got included, so if you see
duplicated dependencies, it's easy to hunt down where they come from.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
I2S_STM32 is already within an 'if I2S', in drivers/i2s/Kconfig.
'if FOO' is just shorthand for adding 'depends on FOO' to each item
within the 'if'. Dependencies on menus work similarly. There are no
"conditional includes" in Kconfig, so 'if FOO' has no special meaning
around a source. Conditional includes wouldn't be possible, because an
if condition could include (directly or indirectly) forward references
to symbols not defined yet.
Tip: When adding a symbol, check its dependencies in the menuconfig
('ninja menuconfig', then / to jump to the symbol). The menuconfig also
shows how the file with the symbol got included, so if you see
duplicated dependencies, it's easy to hunt down where they come from.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
I2C_EEPROM_SLAVE is already within an 'if I2C_SLAVE', in
drivers/i2c/slave/Kconfig.
'if FOO' is just shorthand for adding 'depends on FOO' to each item
within the 'if'. Dependencies on menus work similarly. There are no
"conditional includes" in Kconfig, so 'if FOO' has no special meaning
around a source. Conditional includes wouldn't be possible, because an
if condition could include (directly or indirectly) forward references
to symbols not defined yet.
Tip: When adding a symbol, check its dependencies in the menuconfig
('ninja menuconfig', then / to jump to the symbol). The menuconfig also
shows how the file with the symbol got included, so if you see
duplicated dependencies, it's easy to hunt down where they come from.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
These symbols appear within an 'if COUNTER' (in
drivers/counter/Kconfig).
'if FOO' is just shorthand for adding 'depends on FOO' to each item
within the 'if'. Dependencies on menus work similarly. There are no
"conditional includes" in Kconfig, so 'if FOO' has no special meaning
around a source. Conditional includes wouldn't be possible, because an
if condition could include (directly or indirectly) forward references
to symbols not defined yet.
Tip: When adding a symbol, check its dependencies in the menuconfig
('ninja menuconfig', then / to jump to the symbol). The menuconfig also
shows how the file with the symbol got included, so if you see
duplicated dependencies, it's easy to hunt down where they come from.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
These symbols appear within an 'if CLOCK_CONTROL' (in
drivers/clock_control/Kconfig).
'if FOO' is just shorthand for adding 'depends on FOO' to each item
within the 'if'. Dependencies on menus work similarly. There are no
"conditional includes" in Kconfig, so 'if FOO' has no special meaning
around a source. Conditional includes wouldn't be possible, because an
if condition could include (directly or indirectly) forward references
to symbols not defined yet.
Tip: When adding a symbol, check its dependencies in the menuconfig
('ninja menuconfig', then / to jump to the symbol). The menuconfig also
shows how the file with the symbol got included, so if you see
duplicated dependencies, it's easy to hunt down where they come from.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
These symbols appear within an 'if RTC' (in drivers/rtc/Kconfig).
'if FOO' is just shorthand for adding 'depends on FOO' to each item
within the 'if'. Dependencies on menus work similarly. There are no
"conditional includes" in Kconfig, so 'if FOO' has no special meaning
around a source. Conditional includes wouldn't be possible, because an
if condition could include (directly or indirectly) forward references
to symbols not defined yet.
Tip: When adding a symbol, check its dependencies in the menuconfig
('ninja menuconfig', then / to jump to the symbol). The menuconfig also
shows how the file with the symbol got included, so if you see
duplicated dependencies, it's easy to hunt down where they come from.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
These files are 'source'd within an 'if AUDIO_DMIC', in
drivers/audio/Kconfig.
'if FOO' is just shorthand for adding 'depends on FOO' to each item
within the 'if'. Dependencies on menus work similarly. There are no
"conditional includes" in Kconfig, so 'if FOO' has no special meaning
around a source. Conditional includes wouldn't be possible, because an
if condition could include (directly or indirectly) forward references
to symbols not defined yet.
Tip: When adding a symbol, check its dependencies in the menuconfig
('ninja menuconfig', then / to jump to the symbol). The menuconfig also
shows how the file with the symbol got included, so if you see
duplicated dependencies, it's easy to hunt down where they come from.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
These symbols are already within an 'if MODEM_WNCM14A2A', so no need to
put 'depends on MODEM_WNCM14A2A' on them.
Also remove a redundant 'depends on MODEM' from MODEM_WNCM14A2A.
drivers/modem/Kconfig.wncm14a2a is already sourced within an 'if MODEM',
in drivers/modem/Kconfig.
'if FOO' is just shorthand for adding 'depends on FOO' to each item
within the 'if'. Dependencies on menus work similarly. There are no
"conditional includes" in Kconfig, so 'if FOO' has no special meaning
around a source. Conditional includes wouldn't be possible, because an
if condition could include (directly or indirectly) forward references
to symbols not defined yet.
Tip: When adding a symbol, check its dependencies in the menuconfig
('ninja menuconfig', then / to jump to the symbol). The menuconfig also
shows how the file with the symbol got included, so if you see
duplicated dependencies, it's easy to hunt down where they come from.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Most of these are from 'source'ing drivers/sensor/grove/Kconfig within
an 'if SENSOR' (in drivers/sensor/Kconfig), and then adding another 'if
SENSOR' within it.
'if FOO' is just shorthand for adding 'depends on FOO' to each item
within the 'if'. Dependencies on menus work similarly. There are no
"conditional includes" in Kconfig, so 'if FOO' has no special meaning
around a source. Conditional includes wouldn't be possible, because an
if condition could include (directly or indirectly) forward references
to symbols not defined yet.
Tip: When adding a symbol, check its dependencies in the menuconfig
('ninja menuconfig', then / to jump to the symbol). The menuconfig also
shows how the file with the symbol got included, so if you see
duplicated dependencies, it's easy to hunt down where they come from.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
One of these is from 'source'ing a file within an 'if SERIAL', and then
adding another 'depends on SERIAL' within it.
'if FOO' is just shorthand for adding 'depends on FOO' to each item
within the 'if'. Dependencies on menus work similarly. There are no
"conditional includes" in Kconfig, so 'if FOO' has no special meaning
around a source. Conditional includes wouldn't be possible, because an
if condition could include (directly or indirectly) forward references
to symbols not defined yet.
Tip: When adding a symbol, check its dependencies in the menuconfig
('ninja menuconfig', then / to jump to the symbol). The menuconfig also
shows how the file with the symbol got included, so if you see
duplicated dependencies, it's easy to hunt down where they come from.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
These are from source'ing a file within an 'if FLASH', and then adding
another 'depends on FLASH' within it.
'if FOO' is just shorthand for adding 'depends on FOO' to each item
within the 'if'. There are no "conditional includes" in Kconfig, so
'if FOO' has no special meaning around a 'source'. Conditional includes
wouldn't be possible, because an 'if' condition could include (directly
or indirectly) forward references to symbols not defined yet.
Tip: When adding a symbol, check its dependencies in the menuconfig
('ninja menuconfig', then / to jump to the symbol). The menuconfig also
shows how the file with the symbol got included, so if you see
duplicated dependencies, it's easy to hunt down where they come from.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The two redundant SPI dependencies are from 'source'ing a file within an
'if SPI' and then adding another 'depends on SPI' within it.
'if FOO' is just shorthand for adding depends on FOO to each item within
the 'if'. There are no "conditional includes" in Kconfig, so 'if FOO'
has no special meaning around a source. Conditional includes wouldn't be
possible, because an if condition could include (directly or indirectly)
forward references to symbols not defined yet.
Tip: When adding a symbol, check its dependencies in the menuconfig
('ninja menuconfig', then / to jump to the symbol). The menuconfig also
shows how the file with the symbol got included, so if you see
duplicated dependencies, it's easy to hunt down where they come from.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
These symbols appear within an 'if WIFI' (in drivers/wifi/Kconfig).
'if FOO' is just shorthand for adding 'depends on FOO' to each item
within the 'if'. Dependencies on menus work similarly. There are no
"conditional includes" in Kconfig, so 'if FOO' has no special meaning
around a source. Conditional includes wouldn't be possible, because an
if condition could include (directly or indirectly) forward references
to symbols not defined yet.
Tip: When adding a symbol, check its dependencies in the menuconfig
('ninja menuconfig', then / to jump to the symbol). The menuconfig also
shows how the file with the symbol got included, so if you see
duplicated dependencies, it's easy to hunt down where they come from.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Checking for the memcopy support using dma_stm32_stream will give wrong
result as it won't get initialised at that point of time. Hence, use
the dma_config member directly for checking the memcopy support.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Some of these are from 'source'ing a file within a menu that has a
'depends on NET_L2_ETHERNET' (in drivers/ethernet/Kconfig) and then
adding another 'depends on NET_L2_ETHERNET' within it.
Similarly, subsys/net/l2/ethernet/Kconfig sources files within an
'if NET_L2_ETHERNET'.
'if FOO' is just shorthand for adding 'depends on FOO' to each item
within the 'if'. Dependencies on menus work similarly. There are no
"conditional includes" in Kconfig, so 'if FOO' has no special meaning
around a source. Conditional includes wouldn't be possible, because an
if condition could include (directly or indirectly) forward references
to symbols not defined yet.
Tip: When adding a symbol, check its dependencies in the menuconfig
('ninja menuconfig', then / to jump to the symbol). The menuconfig also
shows how the file with the symbol got included, so if you see
duplicated dependencies, it's easy to hunt down where they come from.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The code had GPIO_INT_DOUBLE_EDGE siliently ignored, instead lets run
-ENOTSUP so caller knows its not going to work.
Fixes: #12764
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Most of these are from source'ing a file within an 'if GPIO', and then
adding another 'depends on GPIO' within it.
'if FOO' is just shorthand for adding 'depends on FOO' to each item
within the 'if'. There are no "conditional includes" in Kconfig, so
'if FOO' has no special meaning around a 'source'. Conditional includes
wouldn't be possible, because an 'if' condition could include (directly
or indirectly) forward references to symbols not defined yet.
Tip: When adding a symbol, check its dependencies in the menuconfig
('ninja menuconfig', then / to jump to the symbol). The menuconfig also
shows how the file with the symbol got included, so if you see
duplicated dependencies, it's easy to hunt down where they come from.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Fix calculation of frame length in eth_enc28j60_rx().
The calculation was incorrect because the CRC size was
subtracted only from the lower byte.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
In case of relative alarm, nrf counter driver for TIMER peripheral
was not handling correctly case when new value exceeded top value.
Additionally, RTC implementation has been refactored to use similar
code for calculating alarm ticks.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Inside adc_context_request_next_sampling(), it tries to signal an I/O
error if there is a new request while a sampling is in progress.
However, it is not exactly an I/O error. The system is simply busy.
So signal EBUSY instead.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Most of these are from source'ing a file within an 'if PINMUX', and then
adding another 'depends on PINMUX' within it.
'if FOO' is just shorthand for adding 'depends on FOO' to each item
within the 'if'. There are no "conditional includes" in Kconfig, so
'if FOO' has no special meaning around a 'source'. Conditional includes
wouldn't be possible, because an 'if' condition could include (directly
or indirectly) forward references to symbols not defined yet.
Tip: When adding a symbol, check its dependencies in the menuconfig
('ninja menuconfig', then / to jump to the symbol). The menuconfig also
shows how the file with the symbol got included, so if you see
duplicated dependencies, it's easy to hunt down where they come from.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Also remove some duplicated dependencies for the related symbol
ENTROPY_NRF5_RNG.
The redundant ENTROPY_GENERATOR deps. are in files sourced within a
if ENTROPY_GENERATOR
...
endif
block in drivers/entropy/Kconfig.
The redundant ENTROPY_NRF5_RNG deps. are due to redundant 'depends on'
within an 'if' in the same file.
Tip: Jump to symbols with '/' in the menuconfig and press '?' to check
their dependencies. If there are duplicated dependencies, the
'included via ...' path can be handy to discover where they are added.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The function usart_sam_irq_is_pending (uart_sam_irq_is_pending) return
only the masked value of US_CSR register but it doesn't respect if the
IRQ is enabled or not. For proper function it must check if the IRQ is
enabled for the event.
Signed-off-by: Jiri Kubias <jiri.kubias@leapslabs.com>
Coverity doesn't like that we're storing the return value of
net_buf_findcrlf() near the end of the handler block as "len".
Only to overwrite "len" again once we exit and look for the next
match.
Let's ignore the return value there and also remove the redundant
check for !frag. Either way, we've found a handler, and need to
break the search loop.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/12315
Signed-off-by: Michael Scott <mike@foundries.io>
We can't let i == value_size during the loop which gathers characters
for the length. If we do, the next check of "value[i] != ','" would
access memory beyond the value boundary.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/12290
Signed-off-by: Michael Scott <mike@foundries.io>
Adds a new config HAS_MCUX_FTFX to conditionalize the mcux flash driver
on socs that support it. Selects HAS_MCUX_FTFX on all kinetis socs
except kw40z, because even though this soc has the relevant hardware,
its CMSIS header file is not compatible with the mcux flash driver in
ext/.
This change also prevents enabling the mcux flash driver on lpc and imx
rt boards.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Remove case ranges from the LP3943 LED driver in order to clean
up GNUisms and make the code standards compliant.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
The j iterator is used for priorities, and the i iterator is used for
choosing the actual screening register. Therefore the screening register
availability needs to be checked with i.
This commit also improves the readability by doing two things:
* by moving the screening register index check to a place where the
index is going to be actually used
* by using the ARRAY_SIZE macro instead of a hard-coded number as the
upper limit
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Rephrase prompts for a few options in drivers/spi/Kconfig.nrfx
so that their purpose is presented a bit better.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
In Nordic SoCs, SPI and TWI peripherals with the same instance number
share certain resources and therefore cannot be used at the same time
(in nRF91 Series this limitation concerns UART peripherals as well).
This patch adds Kconfig checks ensuring that only one of such mutually
exclusive peripherals can be enabled.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This patch adds missing SPI_3_NRF_SPIS Kconfig option (referenced by
`ext/hal/nordic/nrfx_config_nrf9160.h`, although not defined anywhere)
and adds support for SPIS3 instance in the nrfx_spis driver shim.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Converts the rv32m1 timer driver to use 'DT_' prefixed defines instead
of deprecated non-prefixed defines.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Converts the rv32m1 pinmux driver to use 'DT_' prefixed defines instead
of deprecated non-prefixed defines.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Converts the rv32m1 interrupt controller driver to use 'DT_' prefixed
defines instead of deprecated non-prefixed defines.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Converts the rv32m1 clock control driver to use 'DT_' prefixed defines
instead of deprecated non-prefixed defines.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Converts the rv32m1 gpio driver to use 'DT_' prefixed defines instead of
deprecated non-prefixed defines.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
mdm_receiver_send() was sending 1 too many bytes of buf. This ended
up being the NULL terminator. Size should be reduced prior to the
while check so that this doesn't happen.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/14001
Signed-off-by: Michael Scott <mike@foundries.io>
When attaching the filters in a way that the filter width dos not change
but the type, CAN_NO_FREE_FILTER was returned when the new filter is at
the end. Also shifting is not necessary when the start is already out
of bounds.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Allow for the MSI to be auto-cal'd via an LSE when enabled, even when
being used as a source for the PLL as the sysclock.
Signed-off-by: Pushpal Sidhu <psidhu.devel@gmail.com>
This value always comes from DTS. No Kconfig symbol named
NS16550_REG_SHIFT ever existed.
Might've been missed in commit 603f068690 ("uart/ns16550: Use DT_ prefix
for remaining device configs").
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
According to the Coverity issue 188890 (github issue #10705)
Fix for overflowed or truncated value count-1U used as return value.
I decided to use a saturating subtract to avoid a vulnerability.
It will always return 0 or bigger value according to the conditions.
Now if count value is 0, function will return 0, not -1 as before.
Signed-off-by: Maksim Masalski <maxxliferobot@gmail.com>
The SimpleLink driver has been defining these macros for its local use.
Given these have been defined in a recent commit in Zephyr
(9c86dbfd8e), we should now avoid
redefining them to prevent build errors.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
The driver was using non-'DT_' prefixed defines which are deprecated.
Move to using proper 'DT_' prefix defines.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
- Remove redundant dependencies on the PWM symbol (which show up as
PWM && PWM in the documentation). The 'source's in
drivers/pwm/Kconfig are already within an 'if PWM' block.
- Turn some repeated 'depends on FOO' into 'if FOO' blocks.
- Turn some 'if FOO's that surround a single symbol into
'depends on FOO'.
'if FOO' is equivalent to adding a 'depends on FOO' to each symbol
within the 'if'.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The feature that used this symbol was removed in 18b07e09e0.
This is just a cleanup commit that removes the unused symbol.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
These options were removed from kconfig in previous patch. So rename
the leftovers as shared_irq driver options are defined in DTS now.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
These options were removed from kconfig in previous patch. So rename
the leftovers as shared_irq driver options are defined in DTS now.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
These options were removed from kconfig in previous patch. So rename
the leftovers as shared_irq driver options are defined in DTS now.
Fix#13746
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Repalces send fifo_fill implementation with poll_out,
this makes the receiver usefull on most SoC.
Signed-off-by: Georgij Cernysiov <g.cernysiov@elco-automation.de>
Rearranges functions to public and private groups,
and adds missing function comments.
Signed-off-by: Georgij Cernysiov <g.cernysiov@elco-automation.de>
Log possible uart device binding error and change
the error type to a more correct one.
Signed-off-by: Georgij Cernysiov <g.cernysiov@elco-automation.de>
No need to hide the symbols in the header file if CONFIG_NET_LLDP
is not enabled. This also allows the documentation to be generated
properly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Console subsystem doesn't depend on older consoles-in-drivers, the
only common thing between them is CONFIG_UART_CONSOLE_ON_DEV_NAME
setting, so make it so (by depending on either UART_CONSOLE or
CONSOLE_SUBSYS.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Potentially overflowing expression 1U << register_demand
I changed to (u64_t)1U << register_demand
To avoid overflow, I casted 1U to type u64_t.
Coverity-CID: 190996
Fixes: #13829
Signed-off-by: Maksim Masalski <maxxliferobot@gmail.com>
The newer series of timer drivers will compare counters vs. the last
tick boundary to compute a number of ticks to announce to the kernel.
In the case of CONFIG_TICKLESS=n, this actually represents a change of
behavior from our old scheme where "ticks" always reflected the number
of interrupts received.
The distinction only matters when an interrupt is delayed more than a
full tick, of course. But that actually makes a difference to some
timekeeping code. Restore the old behavior.
This also has the benefit of further reducing code size when !TICKLESS
and improving performance of the ISR by removing the division
(remember Cortex M0 has no hardware divide!).
Fixes#12409
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
GPIO_INT_ACTIVE_LOW is 0 which means it cannot be simply AND-ed.
So fix the condition.
Fixes#13880
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Coverity scan found issue with a missing 'break' statement. Fix
push_data by adding the break after handling the 1 byte case.
Coverity CID: 190978
Fixes#13842
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit adds the Clock Control Interrupt Service
Routine into the customized vector table, when building
for nRF52X-based platforms. As a result, the interrupts
generated by the clock control will not interfere with
the test.
Fixes#13823.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The UARTs on the Apollo Lake SoCs have PLLs that feed the baud rate
generators. This patch allows a user to specify custom M/N values for
those PLLs when custom/high-speed baud rates are required.
I'm not entirely satisfied with the way the PCP values are configured,
because it requires tweaking data in both Kconfig and DeviceTree. For
the time being I've merely taken my cue from another similar feature
(the DLF register support) and have punted on figuring out the "right
way" to expose UART configuration to the application.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Change the parameter types from can_msg to zcan_frame and from
can_filter to zcan_filter.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
For sending the zcan_frame can be const, because its only
copied to the registers.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
patch modifies the set top value api to return error only
when ticks passed from application is not equal top value
supported by hardware.
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
For PLLQ divisor configuration, use directly RCC_PLLCFGR_PLLQ_Pos
definition instead of calculating its position from RCC_PLLCFGR_PLLQ.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Default AHB presacler value was set to 0 which is not an allowed
value. Set it to 1 and limit range from 1 to 512.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Some more were added since the cleanup pass in June 2018. See e.g.
commit 2d50da70a1 ("drivers: ipm: Kconfig: Remove redundant 'default n'
properties") for a motivation. It also avoids people wondering whether
or not they need to put in 'default n'.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Same change as in commit 8cf8db3a73 ("Kconfig: Use a short, consistent
style for prompts"), fixing stuff that got introduced since then.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Previous rename from CONFIG_* to DT_* left a few remaining
CONFIG_*. So rename them manually now.
Fix#13753
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Follow the pattern we have for other peripherals in that if the driver
class (CAN) is enabled than enable the driver for that class
(CAN_STM32). Also have the STM32 CAN driver depend on being on a STM32
SoC.
Remove setting of CONFIG_CAN_STM32 in any .conf files as it will get set
of CONFIG_CAN is set/enabled.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
RTC_Alarm IRQ is mentioned as an exti interrupt in documentation,
so it was available in exti handler.
Though, in Zephyr it is used driectly in RTC driver.
Having it in exti generates and issue when activating RTC driver,
so remove its handling from exti driver.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
IRQ lines definition in function __stm32_exti_connect_irqs ifdefery
does not match __stm32_exti_isr_x_y functions definitions.
Fix this.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Some mcux gpio instances do not have dedicated interrupt vectors and
therefore conditionalize out the IRQ_CONNECT() and irq_enable() calls
during driver initialization. The driver initialization incorrectly
returned an error in this case, when really it just has nothing to do.
The driver can still be used without interrupts, and the gpio configure
function returns an error if an application tries otherwise.
Commit a68120de6d introduced a check on
the init return value to prevent applications from using drivers that
fail to initialize. This in turn caused zephyr/samples/basic/threads to
assert on the frdm_kl25z board. Fix this by modifying the mcux gpio
driver to return success when there is no interrupt to connect.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This is an application facing define, specific to this
driver, for the public uart_drv_cmd() API. Put it with
public headers.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
In order to follow the naming from Linux, change the name of
can_msg to zcan_frame, and can_msg_filter to zcan_filter.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add new "struct can_frame" which is compatible with Linux so that it
is easier to port socket-can applications from Linux.
Rename existing can_filter to can_msg_filter so that the name will
not conflict with Linux compatible can_filter struct.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In was generating these warnings:
eth_stellaris.c:66:8: warning: unused variable ‘eth_hdr’
eth_stellaris.c:65:8: warning: unused variable ‘head_len_left’
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It is a bit awkward that ip/proto headers have to be rebuilt (with fake
data in it though). Let's see in future if that's really needed,
offload device handles already ip/proto headers by themselves so we
should not care.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Wait in the send callback for the packet to be actually sent.
After this change, only one TX packet will be handled at once.
This is needed because of the way the TX packets are currently handled
in L2 after this PR: #12563
This is similar to what #13167 did for the SAM GMAC on SAM E-70.
Without this, packet time-stamping does not work with the current stack.
This commit is minimalistic on purpose to make it easily revertible when
the network stack is able to properly handle DMA drivers for TX packets
again.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Let's also check for bytes_read == 0 after calling mdm_receiver_recv()
and if so, break the loop so we don't endlessly loop.
Signed-off-by: Michael Scott <mike@foundries.io>
Remove DCACHE_WRITEBACK Kconfig variable definition in Intel S1000
DMA driver. Remove the variable from default configuration as well.
Cache configuration is fixed and the cache operation routines
internally take appropriate action based on the cache configuration.
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
It is planned to deprecate SHELL_CREATE_STATIC_SUBCMD_SET macro
which is replaced by SHELL_STATIC_SUBCMD_SET_CREATE.
Additionally, removed irrelevant comments about alphabetical
ordering which is no longer needed.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This simplifies a bit the driver itself as it does not need to create
the net_pkt it wants to send anymore.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
vl53l0x driver is using an external library to build, located under:
ext/hal/st/lib/sensor/vl53l0x.
This library is expecting stdint.h lib to be available and to
secure this for driver library inclusion work, a stdint.h file
header check was done. This check was based on assumptions on possible
header names for stdint.h.
Due to recent renaming of the zephyr header files, this check was
returning a false positive, generating warning at compilation.
Rather than updated with new header names, remove this check, since
driver porting is completed and stdint.h inclusion is actually
done.
Fixes#10134
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
A common driver is shared between stm32 chips, which was not the case
for stm32f3 series. As a consequence stm32f3 was not maintained
equally and was missing features such as flash layout or dts based
configuration.
Besides, drivers had some flows such as wrong bus clock and
missing HSI clock activation which lead to issues on boards not
using HSI as main clock.
As a consequence this commit moves stm32f3 series flash driver to
common stm32 flash drivers.
Fixes#4197
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Cleanup the Kconfig code for the flash driver. Platform-specific
options should be in their own Kconfig files to be consistent and to
not pollute the common configuration.
To this end we move the nrf options into it's own file.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Cleanup the Kconfig code for the flash driver. Platform-specific
options should be in their own Kconfig files to be consistent and to
not pollute the common configuration.
To this end we move the mcux options into it's own file.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Cleanup the Kconfig code for the flash driver. Platform-specific
options should be in their own Kconfig files to be consistent and to
not pollute the common configuration.
To this end we move the nios2 options into it's own file.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The patch 44758977f8 made a change where
SECTORS_COUNT was not calculated properly. This patch corrects it.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
There are issues using lowercase min and max macros when compiling a C++
application with a third-party toolchain such as GNU ARM Embedded when
using some STL headers i.e. <chrono>.
This is because there are actual C++ functions called min and max
defined in some of the STL headers and these macros interfere with them.
By changing the macros to UPPERCASE, which is consistent with almost all
other pre-processor macros this naming conflict is avoided.
All files that use these macros have been updated.
Signed-off-by: Carlos Stuart <carlosstuart1970@gmail.com>
The ring_buf implementation is basically used as an array of net_buf
pointers in the RX path. The tail and head indexes are taken from the
RX descriptors and not from the ring_buf. That's why for example the
fact that head is never initialized doesn't cause problem. Only len is
used in free_rx_bufs(), but anyway this function is plainly broken as
it always free the first net_buf and doesn't set it back to NULL.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Scale down the TX path of the GMAC driver by waiting for a packet to be
fully sent before returning from the send function. This has a small
performance impact, but has a few advantages:
- It allows the Ethernet code to modify the packet afterward, fixing PTP
support on this board (see PR #12563).
- It returns an error to the IP stack in case of a transmit failure.
- It doesn't require net_buf to be thread safe.
This change can be reverted by changing GMAC_MULTIPLE_TX_PACKETS from 0
to 1.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Generate interrupt on every ALS cycle in non-trigger mode
and enable ALS saturation interrupt.
resolves: #11989
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
The spi mcux_lpspi driver has been using non DT_ prefixed defines for
DT generated defines. Switch to use DT_ prefixed ones as we want to
deprecated the non DT_ prefixed defines.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This patch changes the ICR masking to use a fixed mask instead of
a buggy read/write of the current ICR to itself. The ICR is write
only and reading this for information is unpredictable and should
be avoided.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
In the SimpleLink wifi driver, the socket family value needs to be
converted to the SL_* equivalent to be understood by the SimpleLink
API, instead of being passed straight in.
While not strictly necessary, we are doing the same for socket type
and protocol values to future-proof ourselves in case similar changes
happen to the values defined for these in Zephyr header files.
Fixes#13203
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
The GMAC driver tries to ensure that it can always send a complete
Ethernet frame. However in the TX path this is the problem of the IP
stack: if the buffers can't be allocated, they won't be sent. Therefore
just drop the check.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Now that the RX packets are limited to the RX workqueue only, we can
reduce ETH_SAM_GMAC_BUF_RX_COUNT to 12 and still be able to receive a
full Ethernet frame. This reduces the minimum NET_BUF_RX_COUNT required
by this driver to 24.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This reverts commit afbee4c96a. The IP
stack has been fixed and does not use the RX packets or buffers to
transmit data.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Following configuration options are not supported by STM32
gpio driver:
-GPIO_INT_LEVEL
-GPIO_POL_INV
Return an error when one of these is requested.
Fixes#12766
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This commit makes the stm32 CAN driver more readable and fix
a bug where the usage and rx_response array are not shifted correctly.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
LOG_LEVEL should be set to CONFIG_PWM_LOG_LEVEL not
CONFIG_LOG_PWM_LEVEL. In cleaning this up use
LOG_MODULE_REGISTER(x,y) form to reduce 2 lines to 1.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
LOG_LEVEL should be set to CONFIG_MODEM_LOG_LEVEL not
CONFIG_LOG_MODEM_LEVEL. In cleaning this up use
LOG_MODULE_REGISTER(x,y) form to reduce 3 lines to 1.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The Kconfig symbols for RX/TX LSB first didn't match between the driver
and the Kconfig file. Change driver to match Kconfig symbol names
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The generated defines RTC_0_CLOCK_FREQUENCY and RTC_0_PRESCALER are
maked as deprecated by dts generation. This causes a build warning and
an error during sanitycheck runs. Replace with the DT_ prefixed
versions that are not deprecated.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Commit 040d6b6e99 (eth: eth_mcux: Convert to use DT_ prefixed defines)
changed all the defines, but to incorrect ones.
This commit changes them to what actually gets generated.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
The hwinfo shell uses shell functions and thus doesn't build when
CONFIG_SHELL=n. Fix that by adding a dependency on SHELL.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
DT_USB_NUM_BIDIR_ENDPOINTS includes EP0, which we should not
take it into account when we check endpoint capabilities
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
Convert generic FLASH_{WRITE,ERASE}_BLOCK_SIZE to driver specific
generated define DT_JEDEC_SPI_NOR_0_{WRITE,ERASE}_BLOCK_SIZE.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert generic FLASH_WRITE_BLOCK_SIZE to driver specific generated
define DT_SOC_NV_FLASH_0_WRITE_BLOCK_SIZE.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert generic FLASH_{WRITE,ERASE}_BLOCK_SIZE to driver specific
generated define DT_SOC_NV_FLASH_0_{WRITE,ERASE}_BLOCK_SIZE.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert generic FLASH_ERASE_BLOCK_SIZE to driver specific generated
define DT_SOC_NV_FLASH_0_ERASE_BLOCK_SIZE.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert generic FLASH_WRITE_BLOCK_SIZE to driver specific generated
define DT_SOC_NV_FLASH_0_WRITE_BLOCK_SIZE.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
On behalf of : Timo Teräs <timo.teras@iki.fi>
UART_REG_ADDR_INTERVAL is SOC / chip implementation specific feature,
and its width does not always correspond to current settings for
IOPORT/non IOPORT access method.
Signed-off-by: Francisco Munoz <francisco.munoz.ruiz@intel.com>
The eth mcux driver has been using non DT_ prefixed defines for DT
generated defines. Switch to use DT_ prefixed ones as we want to
deprecated the non DT_ prefixed defines.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The i2c_imx driver has been using non DT_ prefixed defines for DT
generated defines. Switch to use DT_ prefixed ones as we want to
deprecated the non DT_ prefixed defines.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The gpio mcux driver has been using non DT_ prefixed defines for DT
generated defines. Switch to use DT_ prefixed ones as we want to
deprecated the non DT_ prefixed defines.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add support to STM LIS2DW12 3-axis accelerometer driver.
The driver support I2C and SPI bus communication and both
polling and drdy trigger mode.
Co-authored-by: Mario Tesi <mario.tesi@st.com>
Signed-off-by: Armando Visconti <armando.visconti@st.com>
The values for the registers like GDV, SDV and Boarder Waveform
depend on the panel and display controller. Add DT properties
and obtain such values from DT.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Replace generating CONFIG_ symbols with DT_ symbols for chosen
properties like 'zephyr,console' or 'zephyr,bt-mon-uart'. We now use a
kconfigfunctions (dt_str_val) to extract the info from dts into Kconfig.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add support for socket CAN functionality. This means that user
is able to use BSD socket interface to send and receive CAN
packets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instance 2 & 3 for some reason never transitioned CONFIG_SPI_*_IRQ_* to
DT prefix. Fix that since those Kconfig symbols will never exist.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The PWM driver can only control channels 1-3 of the PWM peripheral, not
channel 0. This is an artifact of the peripheral's design.
Signed-off-by: Nathaniel Graff <nathaniel.graff@sifive.com>
This patch adds basic support for the PWM devices available on the Atmel
SAM family. Beside enabling the driver, everything is selected through
the device tree, including enabling the PWM0 and PWM1 devices. Thus
CONFIG_PWM_0 and CONFIG_PWM_1 are ignored.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The SAM GMAC Ethernet driver currently keeps a reference to the packet
being sent in addition than keeping of references of the fragments. In
practice this is only needed when PTP is enabled, otherwise the driver
only need to prevent the fragment (or even their content) to be changed.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The SAM GMAC Ethernet driver uses scatter gather DMA to transmit data.
Each fragment of a network packet is mapped from a set of descriptors
that is used by the controller to do the DMA transfer. This means that
the packet is not necessary sent when the send() function returns. For
that reason the driver calls net_pkt_ref() on the packet to prevent it
from being freed. It is then unreferenced with net_pkt_unref() in the
TX ISR when the packet has effectively been sent.
However this doesn't work if the packet is modified in the meantime,
like it will be done in PR #12563 to remove the Ethernet header
contained in the first fragment. To avoid that, call net_pkt_frag_ref()
on each fragment of the packet, and unreferenced them with
net_pkt_frag_unref() in the TX ISR when the packet has effectively been
sent.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The function to set channel alarm is called counter_set_channel_alarm.
To match the name of the function performing the reverse operation this
commit renames counter_disable_channel_alarm() function to
counter_cancel_channel_alarm().
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
The controller does not support trigger. However, the check for
this condition was incorrectly (as GPIO_INT_LEVEL is 0). So fix
it.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Interrupts default to trigger on level for historical reasons, so use of
GPIO_INT_LEVEL` as a mask results in a zero value. Use a mask macro to
isolate the trigger configuration.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Use the new i2c_write_read() wrapper to simplify the code.
Also add several overlays used to test the sensor on a variety of
boards, and conf file support for trigger testing.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Replace the sole use of i2c_burst_read_addr with a more generic API
function to allow the former to be deprecated along with its unreliable
sibling write and update functions.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Provides a STM32 RTC driver using new counter API.
Driver does not support wrap related functions (set, get, ..)
Fixes#11373
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The CMSDK Dual Timer can be used as a timer or as a counter.
The unified interface proposed in #8340 unifies counter.h and rtc.h to
provide a common interface.
This patch modifies the timer implementation of the dual timer to
make it compliant with the new proposed interface.
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The CMSDK Timer can be used as a timer or as a counter.
The unified interface proposed in #8340 unifies counter.h and rtc.h to
provide a common interface.
This patch modifies the timer implementation of the single timer to
make it compliant with the new proposed interface.
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Enables debug logging in the counter_basic_api test. Fixes a build error
in the nrf counter drivers when logging is enabled.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds a shim layer around the mcux rtc driver to adapt it to the zephyr
counter interface. Portions of this driver are reused from the existing
rtc driver in drivers/rtc/rtc_mcux.c.
The hardware supports a single alarm only and a fixed wrap value.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
In case of default top value, driver was calling top value
callback only on the first period. This was not expected behavior.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add shim driver for i.MX EPIT (Enhanced Periodic Interrupt Timer)
peripheral which can be used for i.MX6SoloX, i.MX7D and other i.MX socs.
Origin: Original
Signed-off-by: Stanislav Poboril <stanislav.poboril@nxp.com>
Renamed:
- counter_set_wrap to counter_set_top_value
- counter_get_wrap to counter_get_top_value
- counter_get_max_wrap to counter_get_max_top_value
Updated nRF implementations and counter test.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Modify alarm callback to return user_data and channel_id.
Set_alarm and disable_alarm updated accordingly. Renamed
counter_*_ch_alarm to counter_*_channel_alarm. Updated test
and nrf implementations.
Updated doxygen comments.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
nrf_rtc_timer was selecting counter RTC1 instance even though it
is not using counter API at all.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Upstream trunk moved to a newer Nordic HAL that changed file and
constant names.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The system timer uses RTC1, but does not implement the counter API with
it. Instead of auto-enabling the counter API on the system timer make
the two conflict until/unless both APIs are supported by the peripheral.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Using `COUNTER_2_NAME` when all other properties are
`COUNTER_TIMER2_foo` is confusing. Make the names consistent.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Add driver support for kinetis ID device.
The length depends on the SoC.
`SIM_GetUniqueId` was not used because the struct would reorder
the ID and makes the driver more complicated because the length
of the struct depends on the SoC.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Adds a shim layer around the mcux elcdif driver to adapt it to the
zephyr display interface. Although the hardware and underlying mcux sdk
driver can support additional configurations, some shortcuts are
currently made in the shim that force a given pixel format, lcd data
bus width, and signal polarity. This works with the rocktech lcd module
used on imx rt boards, but will need to be updated for other display
panels.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The GPIO controller only supports edge triggering according to
the descriptions of the associated registers. So errors out
when level trigger is requested. Also adds the option to do
double edges triggering as the controller supports this.
Fixes#12763
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Driver for the I2C peripheral in the SiFive Blocks RTL
Repository (https://github.com/sifive/sifive-blocks).
Signed-off-by: Nathaniel Graff <nathaniel.graff@sifive.com>
Fix issue #9028: last bit of SPI/I2S transaction may be corrupted.
Impacted STM32 SOC series: F0/F1/F2/F3/F4/L0.
Notes:
- F2/F4/L0: set gpio to very_high speed ('11')
- F0/F3: set gpio to high speed ('11').
- F1: set gpio to 50MHz.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Add SPI_6 Kconfig symbol as this is the higher supported instance on
STM32.
This makes symbol CONFIG_SPI_6, used in stm32 driver a valid symbol.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Enable HW PWM driver instead of the SW one on nRF SoCs where the PWM
peripheral is present.
Default PWM instances are also enabled on Nordic DK boards so that it
is possible to build the basic fade_led sample for them without extra
adjustments.
After the above changes are applied, some configuration alterations
in basic samples blink_led and fade_led become no longer needed.
These are removed. And the blink_led sample is corrected so that it
works with the nRF HW PWM driver as well.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
To avoid confusion, callbacks using ordinal pin numbers
is going to be reverted. So the driver has to be re-worked
to expose multiple devices so each device has 32 pins.
Also fixes#12765
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This allows the shared_irq driver to be configured by device tree.
With previous implementation, only the board configuration can
override the IRQ trigger, as the trigger config is a "choice" rather
than "config". With this patch, the driver can be fully configued at
the SoC level.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The selection of the Cortex M systick driver to be used
as a system clock driver is controlled by
CONFIG_CORTEX_M_SYSTICK.
To replace it by another driver CONFIG_CORTEX_M_SYSTICK
must be set to 'n'. Unfortunately this also controls
the interrupt vector for the systick interrupt. It is
now routed to __reserved. More bad the interrupt vector
can not be set by IRQ_CONNECT as it is one of the hard
coded interrupts in the interrupt table.
Route the hard coded systick interrupt to z_clock_isr
and make z_clock_isr a weak symbol that can be overwritten
by an alternative systick system clock driver.
Signed-off-by: Bobby Noelte <b0661n0e17e@gmail.com>
The iterator over registered callbacks failed to account for the
possibility that the callback would remove itself from the list. If
this occurred any remaining callbacks would no longer be reachable from
the node. Switch to the slist iterator that is safe for self-removal.
Note that the slist API remains unsafe for removal of subsequent nodes.
Even with the corrected code removal of the next callback registration
(cached in tmp) will result in it being called anyway, with the
remaining unremoved registrations not being called. If the next
callback were removed and re-registered on a different device, the
callbacks would be invoked for the wrong device.
Resolve this by a documentation change describing the conditions under
which a change to callback registration from within a callback are
permitted. Add a similar note regarding the effect of adding a
callback. The current event invocation behavior for callbacks added
within an event is explicitly left unspecified, though in the current
slist implementation newly added callbacks will not be invoked until the
next event.
Closes#10186
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
This commit fixes the issue with excess current being drawn
during sleep due to active HFCLK with external crystal.
Clock-related operations were moved to cable attachmend and
detachment handlers to ensure that HFCLK is not requested
when it's not needed.
Signed-off-by: Paweł Zadrożniak <pawel.zadrozniak@nordicsemi.no>
This commit adds support for device id shell command.
Example:
uart:~$ hwinfo devid
Length: 12
ID: 0x1b0320d51485330313420
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Fixed an issue I2S wouldn't resume when started after a stop
Added code to empty the TX/RX FIFOs upon stop
TX stop is achieved by letting FIFO underrun, then changing state in ISR
RX FIFO is read until empty when RX is stopped
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
This commit adds a new hardware info API.
With this API it is possible to read out the device ID.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
From the driver point of view, monochrome controllers from the ssd16xx
family mostly differ by the amount of row and columns that are
supported. If they support more than 256 rows and/or columns the
corresponding size or position is sent using 2 bytes instead of 1 byte.
This patch therefore adds the width-bits and height-bits DT properties
to make this configurable.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Instead of hardcoding multiple times the display dimensions, use the
values from DT. This still assume 8 rows per page and 8 pixels per
bytes, but that should always be the case for this controller and a
monochrome display.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
STM32 specific behavior "IWDG_STM32_START_AT_BOOT" is enabled
by default. As all vendor specific behavior, this is preferred
to be disabled by default and activated at application level,
so application can have better control of the driver.
For instance watchdog test can't run with this setting.
Disable by default.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Use separate bindings for nRF Family SPI Slaves and SPI Masters so that
the properties "csn" and "def-char" can be made required for Slaves
(for Masters such settings are not applicable), and to avoid confusion
between the properties "csn" and "cs-gpios" for Master nodes.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Convert the HCI SPI driver to get the SPI and GPIO settings from Device
Tree instead of Kconfig. The "zephyr,bt-hci-spi" binding is used as
a common one for this purpose ("st,spbtle-rf" is removed), to take
advantage of the new DT_<COMPAT>_<INSTANCE> generated macros and get
rid of related fixups and aliases.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Use the new DT_<COMPAT>_<INSTANCE>_<PROP> defines to instantiate
devices. This commit adds also ability to define individual pin
locations on SoC series that support the feature. Definitions of GPIO
pins assigned to a given location have been moved from soc_pinmap.h file
to board DTS file.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Clock ISR would callback into the USB driver before it was initialized
and ready to deal with events. This caused a fault.
Statically initialize the fifo to queue events and process them when the
USB device is initialized to avoid the problem.
Signed-off-by: Tom Burdick <thomas.burdick@gmail.com>
Add native_posix USB virtual driver connected over USBIP to the Host
Linux.
Fixes: #9846
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Some defines should have been converted from CONFIG_ to DT_ prefix. For
some reason they got missed in this driver.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The driver was defining a macro with a CONFIG_ prefix but this wasn't
coming from Kconfig. Change the macro name not to conflict with the
Kconfig CONFIG_ namespace.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The driver was defining a macro with a CONFIG_ prefix but this wasn't
coming from Kconfig. Change the macro name not to conflict with the
Kconfig CONFIG_ namespace.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Its been at least 2 releases since we marked a number of watchdog APIs
as deprecated. Lets remove them.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If status is 0, both ip_hdr and proto_hdr will own a pointer to the
relevant IP and Protocol headers. In order to know which of ipv4/ipv6
and udp/tcp one will need to use respectively net_pkt_family(pkt) and
net_context_get_ip_proto(context).
Having access to those headers directly, many callbacks will not need
to parse the packet again no get the src/dst addresses or the src/dst
ports. This will be change after this commit.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Use the new API where relevant. Only sam_gmac is left aside for now.
This simplifies a lot the code as the caller should only care about
allocating net_pkt and its buffer once, and thus will not need to mess
with "frags" etc...
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Use auto-generated device tree macros in LPS25HB driver to avoid
usage of dts.fixup code for it.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Use auto-generated device tree macros in LSM6DS0 driver to avoid
usage of dts.fixup code for it.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Use the new DT_<COMPAT>_<INSTANCE>_<PROP> defines to instantiate
devices. This commit adds also ability to define individual pin
locations on SoC series that support the feature. Definitions of GPIO
pins assigned to a given location have been moved from soc_pinmap.h file
to board DTS file.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Convert usb_dc_stm32 driver GPIO disconnect to use new defines so we
can remove the dts_fixup.h code for it.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We have moved GPIO info to DT so the Kconfig symbols for GPIO lines
aren't used anymore. We can just remove them.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
1. Fix trailing comment for DT_USBHS_MAXIMUM_SPEED
2. Fix missed CONFIG_USB_HS_BASE_ADDRES that should be
DT_USB_HS_BASE_ADDRESS
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This board is unmaintained and unsupported. It is not known to work and
has lots of conditional code across the tree that makes code
unmaintainable.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Force Operation Mode Strap Override register to disable NANDTree. This
is due to some users reporting PHY entering NANDTree.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
Boot PHY initialization timeout, caching mechanism fixes and networking
buffer descriptors moved to no cache section. Enabled cache management
in networking driver and manual barriers.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
We use DT to get the I2C address, so the define that got it from a
Kconfig sybmol isn't used and the Kconfig symbol isnt defined. Remove
this dead code.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Since the lp3943 led driver still supports both DTS and non-DTS
configuration, we update the code to use DT_<COMPAT>_<INSTANCE>
defines for the CONFIG_HAS_DTS_I2C case.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Since the pca9633 led driver still supports both DTS and non-DTS
configuration, we update the code to use DT_<COMPAT>_<INSTANCE>
defines for the CONFIG_HAS_DTS_I2C case.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Since the lp5562 led driver still supports both DTS and non-DTS
configuration, we update the code to use DT_<COMPAT>_<INSTANCE>
defines for the CONFIG_HAS_DTS_I2C case.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
* MIN_DELAY: 1024 -> 512
* optimzie some code sequence
* fix a bug in setting the new timer limit value
* case: before set limit register with new value,
if counter rolls back to 0, the limit value should be
adjusted.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Error code SL_ERROR_BSD_ESECUNKNOWNROOTCA is returned from sl_Connect()
when the root CA used is not part of the certificate catalog on the
network processor. We should warn the users about this and continue on,
given the connection is successful.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
simplelink_socket() is not returning non-zero socket file descriptors
when it succeeds. This leads to socket() to always return socket fd 0,
even when the network processor returns a non-zero fd.
This commit fixes simplelink_socket() to return the correct socket fd
when it succeeds in getting one from the network processor.
Fixes#12650
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
The SSD1673 driver currently use k_busy_wait to wait for the
controller to finish the execution of a commmand. However a display
update command can take from a few hundreds of ms (default LUT) to
almost a second (initial LUT). k_busy_wait is just a spinning loop,
which prevents all the threads with lower priority to not be executed
during that time. That could be the case for example of the shell or
the log thread.
As the timing is not critical, it's better to use k_sleep instead,
allowing the CPU to process other threads. In the long term it might
even be better to use an interrupt there, but might not be that easy if
we want to support to various SoCs that can be connected to such a
display.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The smp_timer_init() was removed during timer re-write.
This results in undefined references error during compilation
when CONFIG_SMP=y. So add it back so we can compile for SMP.
The logic is updated from the previous version to the latest
in the driver.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
exti driver implementation does not fit all SoCs because
some EXTI ip does not match stm32_exti register map provided.
Instead of providing exti register map for all SoCs, use LL API
which abstracts IP variations and enable uniform use of the drivers
on all STM32SoCs.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Use the new DT_<COMPAT>_<INSTANCE>_<PROP> defines to instantiate
devices. This commit adds also ability to define individual pin
locations on SoC series that support the feature. Definitions of GPIO
pins assigned to a given location have been moved from soc_pinmap.h file
to board DTS file.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Validates the gpio pin number before using it to index into a
memory-mapped register array. Otherwise, a user could send a high pin
number and cause an out-of-bounds access.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
We get the following warning with sdk-ng:
drivers/sensor/lis2dh/lis2dh.c:210:38: error: bitwise comparison
always evaluates to false [-Werror=tautological-compare]
if ((value & LIS2DH_LP_EN_BIT_MASK) == 1 && ...
^~
The test needs to be:
(value & LIS2DH_LP_EN_BIT_MASK) == LIS2DH_LP_EN_BIT_MASK
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
pinmux dev isn't really used or supported. We only have one driver that
is implmeneted, and that driver isn't ever enabled.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
A number of CONFIG_ symbols should have been converted to DT_ defines
instead. Clean that up for PORT2..PORT4.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Previous SAM E70 HAL version was patched by commit 4dcfc8706 ("Add
missing interrupt number definitions") to add missing interrupt
definitions for SAM GMAC Priority Queues. This has been fixed in the
latest HAL by using a slightly different name. This patch updates the
driver accordingly.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
off_t is int with the minimal libc and long with the newlib libc. The
log messages are assuming that off_t is int, therefore this causes
warnings when building with newlib.
Fix that by casting the offset to the "longer" type, ie long.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Every now and then the 100ms delay for collecting IMEI data from the
modem, wasn't long enough and this presents a bad user experience.
Let's set it to 500ms which seems to be working all the time.
Signed-off-by: Michael Scott <mike@foundries.io>
During development of the WNC-M14A2A modem driver, I felt like the
initialization took too long to make the user wait. However, due
to the addition of other drivers such as OpenThread where delays
during startup are noticable, the modem startup time isn't so bad.
Let's remove the delay work which allows Zephyr to startup before
the modem is fully initialized.
NOTE: This also fixes a long standing bug where samples using the
modem would never know when it was ready (without waiting for the
interface up event). This change makes it always ready once the
sample starts.
Signed-off-by: Michael Scott <mike@foundries.io>
Now that the descriptor lists are in non-cached memory, the helpers are
just accessing the w0 or w1 members of the structure. Just drop them and
access the members directly.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Atmel SAM Ethernet module is using a scatter-gather technique to
exchange data with the Ethernet driver. To communicate the location
of the data buffers the driver sets-up a so called descriptor list. This
is effectively a place in RAM containing a sequence of 32-bit words
representing buffer location and its status.
Currently the cache coherency is handled using cache clean or
invalidate. Unfortunately this strategy only works correctly when the
corresponding data size is a multiple of the cache line. This is not
the case here and might lead to data loss or corruption.
Instead of using cache operations, this patch moves the descriptor
listed to the recently added non-cached memory region, as recommended by
ATMEL. A data synchronisation barrier is still required for writes, as
the non-cached memory is defined with TEX=1, i.e. it is not strongly
ordered. The descriptor lists alignment can be decreased to 4 bytes, as
required by the SAM Ethernet module.
The RX/TX buffer are left unchanged, still managed by cache operations.
Fixes#9812
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The RX buffer accounting list is not a list shared with Ethernet device,
therefore there is no need to run a cache clean operation on it.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Now that a hw-flow-control DTS binding has been added for MCUX uart,
let's check for the DT_ define and enable support in the MCUX HAL
layer.
Signed-off-by: Michael Scott <mike@foundries.io>
Convert ssd1306 display driver to use new defines so we can remove
the dts_fixup.h code for it. Also dropped "-i2c" from compatible.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert ssd1673 display driver to use new defines so we can remove
the dts_fixup.h code for it. Also dropped "-spi" from compatible.
Fix up references in reel_board dts and sample.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert the lpd880x driver to use device tree and new DT_<COMPAT>
defines. Support both LPD8803 & LPD8806 device tree compats.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add sam0_rtc_driver that implements system timer API on top of the RTC
and can be used as a replacement for the default systick timer.
Signed-off-by: Martin Benda <martin.benda@omsquare.com>
This belongs in the implementation file that references the array, since
the header is included in multiple files.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Setting bit 3 instead of bit 2 modifies a reserved section of the
register, with the impact that the ODR is not as configured.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Convert apa102 led_strip driver to use new defines so we can remove
the dts_fixup.h code for it.
Also update the driver to set the slave spi address as specified by the
device tree.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Align ieee802154_nrf5 driver to a new radio driver API.
Utilize new radio driver features (CCA).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The SAM E70 GMAC ethernet driver reference a packet with net_pkt_ref()
when queueing a packet, and unreference it with net_pkt_unref() in the
ISR when it has been fully sent.
The call to net_pkt_ref() is done just after re-enabling the
interruptions, so there is however a small race condition that might
cause the packet to be unreference before being referenced. This is
only theoretical and has not been seen in practice.
Fix that by moving the call to net_pkt_ref() just before re-enabling
the interruptions.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The previous commit replaced the net_pkt element ref with an element
atomic_ref. CI tests turned up more places where ref was used directly.
This commit converts them to use the new element.
Signed-off-by: Daniel Glöckner <dg@emlix.com>
For some reason, there was sequence like:
1. Get size of RX packet.
2. Allocate pkt buffer.
3. Check if the size of RX packet is too large, then deallocate pkt
buffer and error out.
Instead, reorder operations to check size before allocating buf.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Adds a new config HAS_MCUX_ENET to constrain which socs can enable the
mcux ethernet driver. This will prevent users from enabling the driver
on socs like kl25z or kw41z which do not have ethernet mac hardware.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This driver supports ST Microelectronics digital pdm microphones
(MPxxDTyy) connected through different peripherals. Currently only
I2S is supported.
The driver makes use internally of the OpenPDM2PCM library
to convert the PDM audio stream to PCM. Currently the
oversampling factor is fixed to 64.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Use auto-generated device tree macros in LIS3MDL driver to avoid
usage of dts.fixup code for it.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Use auto-generated device tree macros in LIS2MDL driver to avoid
usage of dts.fixup code for it.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Use auto-generated device tree macros in LSM6DSL driver to avoid
usage of dts.fixup code for it.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Added UART4 alternate pin function for L4 µC for PC10 and PC11.
Corrected naming of previously defined UART4 TX and RX defines.
Signed-off-by: Georgij Cernysiov <g.cernysiov@elco-automation.de>
Moved UART interrupt dependencies from concrete driver to
the modem receiver as it uses UART interrupt functions within.
This allows developing other UART interrupt based modems without
the need to depend on the aforementioned features explicitly.
Signed-off-by: Georgij Cernysiov <g.cernysiov@elco-automation.de>
Add a level 2 interrupt controller for the RV32M1 SoC. This uses the
INTMUX peripheral.
As a first customer, convert the timer driver over to using this,
adding nodes for the LPTMR peripherals. This lets users select the
timer instance they want to use, and what intmux channel they want to
route its interrupt to, using DT overlays.
Signed-off-by: Marti Bolivar <marti@foundries.io>
Signed-off-by: Mike Scott <mike@foundries.io>
Add a Peripheral Clock Controller (PCC) driver. This gates and ungates
clocks to various peripherals on the SoC.
Signed-off-by: Michael Scott <mike@foundries.io>
Signed-off-by: Marti Bolivar <marti@foundries.io>
The OpenISA RV32M1 SoC has four CPU cores. Two of these are RISC-V
32-bit cores, which are named "RI5CY" and "ZERO-RISCY". (The other two
cores are ARM Cortex-M0+ and -M4.) This patch adds basic SoC
enablement for the RISC-V cores:
- basic dtsi, to be extended as additional drivers are added
- SoC definition in soc/riscv32/openisa_rv32m1 for RI5CY / ZERO-RISCY
- system timer driver for RI5CY, based on LPTMR0 peripheral
The timer driver will be generalized a bit soon once proper
multi-level interrupt support is available.
Emphasis is on supporting the RI5CY core as the more capable of the
two; the ZERO-RISCY SoC definitions are a good starting point, but
additional work setting up a dtsi and initial drivers is needed to
support that core.
Signed-off-by: Marti Bolivar <marti@foundries.io>
Signed-off-by: Michael Scott <mike@foundries.io>
Some extensions to the multi-level interrupt controller are required
to support SoCs with more than four level 2 interrupt "aggregators".
Extend existing support to allow at most 8 level 2 or level 3
aggregators. Use Kconfig macro templates to cut down on boilerplate.
Try to clarify some aspects of the Kconfig help while we're at it, and
change the type of options which count things or are table offsets
from "hex" to "int", so that the generated .config is easier to read.
Finally, make some improvements to gen_isr_tables.py while we are
here. In particular, move some assignments around to cut down on
duplicated work, don't check for symbols we know must exist, and
improve the debug logging output's readability.
Signed-off-by: Marti Bolivar <marti@foundries.io>
It's not an error if a driver does not implement callback related
function. Let's return -ENOTSUP relevantly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It needs to verify if the callback was not already installed, and if so:
if is was in controller's list.
It should return an error in case the node is not found though it was
requested to be removed.
If already inserted, it will be silently removed but added again, to
avoid circular list as stated in the bug.
Fixes#11394
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Complete code factorization in stm32 exti drivers.
Add return value in case line is not implemented.
Except returned error code, refactor has been done iso-feature
compared to previous code. Hence error is reported only when
support was not available on previous series.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Use Kconfig named choice for TRIGGER_MODE in order to easy
up the trigger mode selection in default configurations
for boards using this sensor driver.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
The PLLR parameter in LL_RCC_PLLI2S_ConfigDomain_I2S() API should
be selected among the following list of (already shifted) values:
* @arg @ref LL_RCC_PLLI2SR_DIV_2
* @arg @ref LL_RCC_PLLI2SR_DIV_3
* @arg @ref LL_RCC_PLLI2SR_DIV_4
* @arg @ref LL_RCC_PLLI2SR_DIV_5
* @arg @ref LL_RCC_PLLI2SR_DIV_6
* @arg @ref LL_RCC_PLLI2SR_DIV_7
This commit fixes PR #12609.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
We now generate CS GPIO defines from the DTS that we can utilize. We
needed to slightly update the #defines in the driver from:
DT_MICROCHIP_ENC28J60_0_CS_GPIOS_{PIN,CONTROLLER} to
DT_MICROCHIP_ENC28J60_0_CS_GPIO_{PIN,CONTROLLER}
Fixes#12640
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Share lis2dh driver among few accelerometer sensors that has
same register interface: LIS2DH, LIS3DH, LSM303DLHC, LIS2DH12,
LSM303AGR.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Use auto-generated device tree macros in LIS2DH driver to avoid
usage of dts.fixup files. The triggered interrupt part has been
slightly hacked to automatically understand whether only int1 is
configured or both int1 and int2.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Move to using the generated DT_INVENTEK_ESWIFI_ESWIFI0_CS_GPIO_pin and
DT_INVENTEK_ESWIFI_ESWIFI0_CS_GPIO_CONTROLLER defines and drop the
DT_ESWIFI0_CS_GPIOS_PIN & DT_INVENTEK_ESWIFI_ESWIFI0_CS_GPIO_PIN from
dts_fixup.hl
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Not necessary with gcc, and Zephyr is inconsistent about using the
qualifier, but making the intent explicit is a good thing.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
The existing implementation of z_clock_set_timeout() calculates the
compare value based on a complex series of operations including an
unconditional integer division and multiplication intended to ensure the
compare value is aligned to a tick boundary. On the nRF51 this division
requires a call to an outline function with a data-dependent execution
time.
In the common case where the timeout is set less than one tick past the
last observed tick the devision can be elided, as can several extra
operations intended to deal with fractional ticks.
The code also failed to account for a ticks-per-cycle that violated the
minimum delay required to guarantee a compare value would result in a
match without wrapping. The minimum delay was also unreasonably long
(about 1 ms). Reduce it to a more reasonable value to allow for a
higher ticks-per-second, and diagnose attempts to set the tick frequency
above the supported maximum (8192 Hz).
Finally, move the parts of the compare calculation that are not
dependent on the live counter value out of the locked region.
Prior to this change the observed time between the irq_lock() and
irq_unlock() in z_clock_set_timeout() on the nRF51 ranged between 5 us
and 8 us.
With the revised algorithm the observed lock duration is between 2.16 us
(1024 Hz) and 2.88 us (100 Hz) in the common case that the compare is
set within the current tick. If the compare is set late the duration
will be higher, but no greater than the previous implementation.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
The RTC COUNTER register doesn't care that it receives a value larger
than it can hold; it'll discard the bits internally. No need to spend
cycles doing it manually.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
spinlock gains us nothing on an architecture that doesn't support SMP.
Use the standard irq_lock() API so when we search for conditions that
may decrease ISR responsiveness we can find them.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Some of the events from USBD peripheral (i.e. cable disconnect)
were handled in IRQ context and some of them (i.e. ep r/w events) in
system workqueue (inherited from initial driver implementation).
This may lead to race condition in some specific situations.
Currently, all of the events are enqueued in ISR and processed in
workqueue. Driver is reinitialized on queue overflow and queue size
is configurable in KConfig.
Fixes#12016
Signed-off-by: Paweł Zadrożniak <pawel.zadrozniak@nordicsemi.no>
Supported PWM at pins A0, D3, D5 and D6 which are also Arduino
compatible. Also the onboard red LED can be used with PWM.
The basic/{fade_led, blink_led} samples to apply to this board
seemlessly and operate on the onboard red LED.
Also supported RTC.
Signed-off-by: Ioannis Konstantelias <ikonstadel@gmail.com>
In case of TX IRQ pending,
uart_stm32_irq_is_pending() function always return 0,
because "is TXE enabled ?" is checked instead of "is TC enabled ?".
Signed-off-by: Benoit Leforestier <benoit.leforestier@gmail.com>
Behavior of function gpio_stm32_configure has been modified
during driver factorization. Various gpio settings (speed, mode, ..)
are applied conditionally while they used to be applied in sequence,
unconditionally before this change. As a consequence some
combinations of configurations are no more applied (like speed for
alternate mode). This of course has impact in some use cases.
Rework functions in order to apply settings unconditionally. Take
advantage of the change to reduce code size.
This change impacts all SoCs except F1 series.
Fixes#12544
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Added new UART API, that allows for longer transmissions, leaves
IRQ handling on driver side and allows for DMA usage.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
Number of USB endpoints is set via DTS, nevertheless USB driver
tries to enable all endpoints as it uses number of endpoints from
nRFx.
This commit makes driver enable only these endpoints that were
enabled in DTS.
Signed-off-by: Pawel Dunaj <pawel.dunaj@nordicsemi.no>
Add support to STM LIS2DS12 3-axis accelerometer driver.
The driver support I2C and SPI bus communication and both
polling and drdy trigger mode.
Currently it uses high resolution only as power mode.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
The SAM E70 Ethernet driver uses scatter gather DMA to transmit data.
Each fragment of a network packet is mapped from a set of descriptors
that is used by the controller to do the DMA transfer. Each descriptor
contain an address and a length/status. The important status bits are
GMAC_TXW1_LASTBUFFER to indicate the last fragment of a packet and
GMAC_TXW1_USED to indicate that a descriptor has been processed by the
controller.
When starting a transmission, the controller start at the descriptor
after the last one that has been processed. If the descriptor is NOT
flagged by GMAC_TXW1_USED, it sends a first packet by sending all the
fragments up to a descriptor flagged with GMAC_TXW1_LASTBUFFER. The
first descriptor of a packet *and only the first descriptor of a packet*
is then modified to flag it with GMAC_TXW1_USED and to provide a status
(mostly related to errors and checksum offloading). It then continues
with the next packet and so on and only stops if the next descriptor
after GMAC_TXW1_LASTBUFFER is flagged with GMAC_TXW1_USED.
Therefore in order for the controller to stop processing descriptors,
the strategy is to flag the next descriptor after the last fragment to
be sent with GMAC_TXW1_USED. When the next packet has to be queued, the
flag can be removed before starting a transmission.
This is what is currently done in the current driver. However there is a
small race condition in the implementation: if packets are queued fast
enough, the controller is still sending the fragment of the previous
packet when the descriptor are written. When writing the first
descriptor, the GMAC_TXW1_USED flag is removed. This is done after
writing the address (with a memory barrier) so that looks safe. However
given that the GMAC_TXW1_USED flag is only added by the controller to
the first descriptor of a packet it means the next descriptor might
have it cleared. In that case the descriptor is processed, and a junk
packet is sent. That also desynchronize eth_tx and tx_complete as one
or more packets than expected are transmitted.
In order to fix that the strategy is slightly changed to initially write
the first descriptor with the GMAC_TXW1_USED flag set. Once all the
descriptors from the packet are written the bit is cleared (after a
memory barrier). Then the transmission can be started safely.
The patch also does a small optimization writing the next descriptor
with only the GMAC_TXW1_USED bit set instead of setting this bit. As
this will be a non-cached area, it's better avoiding a read followed
by a write if not necessary.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
If a pkt has more frags than the number of TX descriptors, we end up in
a deadlock situation, as the whole packet and thus all the frags have to
be mapped in the descriptors at once. That is why the number of
descriptors is defined as CONFIG_NET_BUF_TX_COUNT + 1.
This wrongly assumes that only TX buffers can be used to send data,
however the packets might also come from the RX buffers, like for
example with ICMPv4.
Therefore define the number of descriptors as the maximum of
CONFIG_NET_BUF_RX_COUNT + 1 and CONFIG_NET_BUF_TX_COUNT + 1. This fixes
a deadlock when CONFIG_NET_BUF_TX_COUNT is much smaller than
CONFIG_NET_BUF_RX_COUNT.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The current SAM E70 Ethernet driver sometimes get stuck if the stack
has to send 2 packets in a row, for example an ack for the just received
data + answer data.
The problem is the following one:
1) The first packet goes through eth_tx, one tx_desc_sem semaphore is
taken, and the tx_timeout_work delayed work is submitted.
2) The second packet also goes through eth_tx, another tx_desc_sem
semaphore is taken, and the tx_timeout_work delayed work is not
started because there is already one already submitted.
3) The first packet has been sent, one tx_desc_sem semaphore is given
and the tx_timeout_work delayed work is cancelled.
4) The second packet has been sent but given the delayed work has
already been cancelled, tx_completed is not called: the tx_desc_sem
semaphore is not given back and the network packet is not
unreferenced.
The whole timeout concept probably has to be reworked. In the meantime
it is probably better to just drop the timeout code instead of keeping
the driver broken. We can only get stuck on the TX path if there is a
bug in the driver or a hardware malfunction. It might happen, but with
the less probability then the current hangs. In addition it just hides
the real issues and prevent them to be fixed.
This commit therefore just remove the timeout code in the TX path.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Cleanup dependencies in Kconfig and convert some top-level options to
menuconfig. guard all dependent options with if instead of using
'depends on' for readibility.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Cleanup dependencies in Kconfig and convert some top-level options to
menuconfig. guard all dependent options with if instead of using
'depends on' for readibility.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
It was reported, and confirmed by multiple parties that default
CONFIG_ETH_MCUX_RX_BUFFERS=2 under some packet load leads to
1s and increasing packet processing delay and eventual deadlock.
No reports were about CONFIG_ETH_MCUX_TX_BUFFERS=2, but be on safe
side and just set that to the minimal value as the current default,
to allow us to have good conservative base to test various networking
stack issues.
Fixes: #3132
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Correct it so that it is possible to use PWMs on nRF9160 as well,
not only on nRF5 family SoCs.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Minor adjustments are done to the nRF clock_control and rtc_timer
drivers to make them usable on nRF9160 as well.
The arm_irq_vector_table test code is modified only because it uses
the function that has been renamed in the nrf_rtc_timer driver.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Use the symbol generated from DT so that it is common for nRF9160
and nRF5 family SoCs. To avoid artificial renaming of CLOCK_POWER_IRQn
to POWER_CLOCK_IRQn.
For nRF5 family SoCs clock nodes were not defined so far, thus they are
added so that the proper DT symbol is generated for them as well.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
As emulated by QEMU. SMSC9118 is compatible with SMSC9220 as used in
ARM MPS2 board, as well as SMSC9115/6/7/etc. devices.
Portions of the code are based on mbedOS code from its
targets/TARGET_ARM_SSG/TARGET_CM3DS_MPS2/device/drivers/smsc9220_eth.c
eth_smsc9220_priv.h originally comes from Arm mbedOS file:
targets/TARGET_ARM_SSG/TARGET_CM3DS_MPS2/device/drivers/smsc9220_eth.h
augmented with struct & defines from:
targets/TARGET_ARM_SSG/TARGET_CM3DS_MPS2/device/CM3DS.h
and renamed as eth_smsc911x_priv.h to follow Zephyr conventions.
Then, following changes applied:
Changes to build under Zephyr, changes to use symbolic constants
and field access helpers, typo fixes, etc.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The eswifi controller is capable of acting as an Access Point.
Implement ap_enable/ap_disable methods.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Create eswifi_at_cmd and eswifi_at_cmd_rsp helpers, allowing to send an
at command and parse the at response. These methods return success if
the response contains the OK* string. The eswifi_at_cmd_rsp method
extracts response content/size (DATA) on success.
*Response format is:
\r\n[DATA]\r\nOK\r\n>
Where DATA can be arbitrary (ASCII or not).
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Remove all references in the documentation and Kconfig options
to the legacy shell to avoid confusing users and developers
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Add a configuration structure to sht3xd that holds instance-specific
parameters, implemented in a immutable statically allocated object
initialized with material from device tree binding aliases.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Adds a shim layer around the mcux lpi2c driver to adapt it to the zephyr
i2c interface. This shim driver leverages heavily from the mcux i2c shim
driver because the MCUXpresso SDK provides similar APIs for the i2c and
lpi2c peripherals.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The SimpleLink wifi driver enables the Fast Connect method of
WiFi provisioning, which allows the network coprocessor to
reconnect to a previously connected Access Point (AP) on
startup.
Previously, if Fast Connect failed to connect, any network
socket applications would inevitably fail, as there would have
been no wifi connection.
This patch adds a configurable timeout for the Fast Connect
feature, after which timeout, an error is logged informing
the user to manually reconnect to an AP.
Reconnection is typically accomplished by separately running the
wifi sample shell program.
Fixes: #11889
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Commit aad21ecb31 introduced an incorrect
pattern of handling ADC sampling requests with invalid parameters in
both nRF ADC drivers. After discarding such request, the drivers do not
release properly the access lock and therefore become unusable.
Unfortunately, this pattern were later on copied in all other ADC
drivers in the source tree.
This commit adds the proper lock releasing in all the affected drivers.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Due to a copy-paste mistake, this driver used an incorrect module
name (adc_mcux_adc16) in log messages.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Change driver to get I2C address of sensor from the device tree like
most other sensor drivers that utilize device tree.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
15.4 MHR is no longer set in net_buf pointed by net_pkt, but in a
separate net_buf, hence we need to check that net_buf now to
determine if we need to wait for ACK or not.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This is the only use of the k_alert infrastructure in the Zephyr code
base. See whether we can get rid of it.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Add mutex to lock STM32 I2C bus in order to guarantee
that data transfers are atomic and have exclusive access
to the bus.
Issue has been found fetching data from multiple sensors
on I2C bus in a mixed context of thread and triggered
interrupt.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Convert lsm303dlhc_accel & lsm303dlhc_magn sensor driver to use new
defines so we can remove the dts_fixup.h code for it.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Driver for networking device Microchip ENC28J60 is used as SPI slave,
moved to DTS type definition. Samples echo_client and echo_server use
this device on Arduino 101 board.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Configuration of Erase command is specified in DTS. Hence
the corresponding changes in Kconfig are removed.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
Number of sectors is now calculated from the flash density
i.e. (Flash size)/(sector size).
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
This patch enables the support for FLASH_PAGE_LAYOUT and
FLASH_MAP for the generic spin nor flash driver.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
Use DT_ instead of CONFIG_ for spi freq, spi bus name, flash device
name and flash base address.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
The mcux lpuart shim driver was updated in commit
20202902f2 to use DT_ prefix in all
defined labels not related to Kconfig, but instance 2 was missed.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Fix the value for Low Power Enable (LP_EN) bit mask.
(Issue described by Coverity CID #188734)
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Clean up a left over from GPIO driver factorization.
Definition of GPIO_REG_SIZE and GPIO_PORTS_BASE do not need anymore
to be spread accross SoCs.
Put these definitions directly in STM32 pinmux driver.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This patch adds a serial driver for the ARM PL011 IP block.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Modified drivers to use DEVICE_AND_API_INIT() instead of DEVICE_INIT()
This will make sure driver_api,is populated at build time and is exposed
to user space
Signed-off-by: Varun Sharma <varun.sharma@intel.com>
Renaming Kconfig.nrf5 to Kconfig.nrf in the wake of extending
the use of the nRF clock control driver to both nRF5 and nRF91
SOC series.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit renames the nrf5_clock_control.h and
nrf5_clock_control.c files to nrf_clock_control.h and
nrf_clock_control.c, respectively, as they are used
in nRF9160 builds, as well.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit renames the CLOCK_CONTROL_NRF5 Kconfig symbol to
CLOCK_CONTROL_NRF. The change is required to aleviates confusion
when selecting the symbol in nRF9160 SOC definition.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
In driver and application code use the new device-tree values produced
by standard compatible-instance bindings.
As this code may be used as an example add a comment describing how the
binding instance number cannot be reliably used to distinguish multiple
instances.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
initialize both tx and rx in the spi_sam0 driver. Make the spi_sam
driver look the same by splitting the declaration into 2 lines.
Discovered with gcc 8.2
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Currently, when usb_dc_ep_write is called, data is copied to the
internal buffer, hence the requirement for fragmentation, regardless
of low-level nrfx_usbd driver. This commit forces the fragmentation
and prevents potential internal buffer overflow. Adittional
fragmentation flag was added to prevent triggering status stage
(it is handled by hardware completely on nRF chips).
Fixes#12339
Signed-off-by: Paweł Zadrożniak <pawel.zadrozniak@nordicsemi.no>
net_buf_linearize() used to clear the contents of output buffer,
just to fill it with data as the next step. The only effect that
would have is if less data was written to the output buffer. But
it's not reliable for a caller to rely on net_buf_linearize() for
that, instead callers should take care to handle any conditions
like that themselves. For example, a caller which wants to process
the data as zero-terminated string, must reserve a byte for it
in the output buffer explicitly (and set it to zero).
The only in-tree user which relied on clearing output buffer was
wncm14a2a.c. But either had buffer sizes calculated very precisely
to always accommodate extra trailing zero byte (without providing
code comments about this), or arguably could suffer from buffer
overruns (at least if data received from a modem was invalid and
filled up all destination buffer, leaving no space for trailing
zero).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
When tickless was disabled, this inverted test would never fire the
first interrupt and the timer would be silent. Just remove it.
There's no harm in unconditionally enabling a single timer interrupt
at boot.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This patch adds a x86_64 architecture and qemu_x86_64 board to Zephyr.
Only the basic architecture support needed to run 64 bit code is
added; no drivers are added, though a low-level console exists and is
wired to printk().
The support is built on top of a "X86 underkernel" layer, which can be
built in isolation as a unit test on a Linux host.
Limitations:
+ Right now the SDK lacks an x86_64 toolchain. The build will fall
back to a host toolchain if it finds no cross compiler defined,
which is tested to work on gcc 8.2.1 right now.
+ No x87/SSE/AVX usage is allowed. This is a stronger limitation than
other architectures where the instructions work from one thread even
if the context switch code doesn't support it. We are passing
-no-sse to prevent gcc from automatically generating SSE
instructions for non-floating-point purposes, which has the side
effect of changing the ABI. Future work to handle the FPU registers
will need to be combined with an "application" ABI distinct from the
kernel one (or just to require USERSPACE).
+ Paging is enabled (it has to be in long mode), but is a 1:1 mapping
of all memory. No MMU/USERSPACE support yet.
+ We are building with -mno-red-zone for stack size reasons, but this
is a valuable optimization. Enabling it requires automatic stack
switching, which requires a TSS, which means it has to happen after
MMU support.
+ The OS runs in 64 bit mode, but for compatibility reasons is
compiled to the 32 bit "X32" ABI. So while the full 64 bit
registers and instruction set are available, C pointers are 32 bits
long and Zephyr is constrained to run in the bottom 4G of memory.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The HPET default is to deliver events on the same INTIn as the legacy
PIT IRQ, and in fact our code requires that because it uses the
"legacy routing" option. So this isn't really a configurable and has
to be set correctly. Do it right in the kconfig default instead of
forcing boards to set it.
(No, I have no idea where "20" came from either.)
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
When used suitable config overlay, qemu_cortex_m3 with Ethernet
support can be started with just usual "make run".
An example of such overlay is included with samples/net/echo_server,
can be built and run with:
make BOARD=qemu_cortex_m3 \
CONF_FILE="prj.conf overlay-qemu_cortex_m3_eth.conf" run
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Instead of getting the base address from the MCUX headers, use the base
address from the device tree.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The original implementation of gpio functions access registers
directly. Using LL library can add a set of unifying access
functions for all series of stm32 for avoiding accessing low level
code, and improve readability.
Signed-off-by: Song Qiang <songqiang1304521@gmail.com>
All series STM32 have mostly the same GPIO architecture
and can share the same code for GPIO manipulation.
Functions of the external interrupt line control are also the same.
This patch extracts common code from them and put them into the 'common'
folder.
Functions of control GPIO of these series scattered in
soc/arm/st_stm32/stm32xx/ folders contain these functions:
stm32_gpio_flags_to_conf(), stm32_gpio_configure(), stm32_gpio_set(),
stm32_gpio_get, stm32_gpio_enable_int().
This patch merges them into the gpio_stm32.c file.
Signed-off-by: Song Qiang <songqiang1304521@gmail.com>
1. optimize the baudrate calulation
2. For arc iot soc, the interval val is 4
3. before write any regs, the clk of uart must be enabled
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Use the page size retrieved via page layout in flash erase
shell command in case erase size is not given.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
Driver update to use GPIO driver for the reset control signal.
Driver update to use definitions from DTS including I2C address.
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
Update Kconfig for tlv320dac audio DAC to include GPIO
as a dependency. The codec driver now uses GPIO driver
to control the RESET for the DAC.
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
Convert the w25qxxdv driver to use device tree for SPI device params.
Updated the Arduino 101 config to use device tree to specify the SPI
flash. Update the arduino_101_sss to drop Kconfig support for the
w25qxxdv flash.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
By default, after reset SWO signal is not connected to GPIO pin. This
commit adds required initialization code to enable support for SWO
logger. Not all SoC series support the feature.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
In Kconfig.stm32, all UART port symbols were defined with a dependency
on symbol UART_STM32. This is redundant since they are located under
if UART_STM32 condition.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Following recent renaming of STM32 UART Kconfig UART symbols,
LPUART was named as UART_LPUART_1.
Rename to LPUART_1.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
On STM32L4, 14 pins (Port G[15:2]), require external power supply.
Activate this at port G init when PWR_CR2_IOSV is defined.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Zephyr gecko drivers depend on libraries provided by the vendor. The
same libraries may also be used directly by the application code or
RAIL library. To facilitate the latter use case scenario this commit
adds Kconfig options to independently enable compilation of vendor
HAL library modules.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
This commit adds missing I2C_GECKO Kconfig option which currently is
being set implicitly via .defconfig file.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
* Add support for gpio controller driver
Signed-off-by: Ashokkumar B <ashokkumar@zilogic.com>
Signed-off-by: Subash G <subash@zilogic.com>
Signed-off-by: Vishnu K <vishnu@zilogic.com>
Signed-off-by: Vaishnavi D <vaishnavi.d@zilogic.com>
By adding 'aliases' node in SoC .dtsi file it is possible to generate
DT_ defines which specify a logical name rather than relay on module
location on APB bus. E.g. DT_SILABS_GECKO_USART_40010000_LABEL becomes
DT_SILABS_GECKO_USART_USART_0_LABEL. Thus it is possible to remove
dts_fixup.h defines.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
The i2c_atmel_sam3 driver was deprecated at release 1.9, this commit
removes it. Also pinmux_dev_atmel_sam3x driver is removed.
i2c_atmel_sam3 was the last one which depended on it.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Remove configuration parameter CONFIG_BUS_TYPE. Now we may
make use of DT_ST_LSM6DSL_BUS_I2C and DT_ST_LSM6DSL_BUS_SPI
definition to select the bus.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Until now spi_flash_wb_write/read functions were only supporting
buffers that fit into a W25Q page (even if there were not checking
the offset was page aligned).
This change allows these function to read/write multiple W25Q page.
This change is required as the caller of these functions are not
aware of flash page size.
Signed-off-by: Johannes Hutter <johannes@proglove.de>
Signed-off-by: Olivier Martin <olivier.martin@proglove.de>
Signed-off-by: Michael Wendland <michael@proglove.de>
The next commit will use this new
spi_flash_wb_write_protection_set_with_lock() in
spi_flash_wb_write() that already hold the lock.
To prevent a lock we need to skip the SYNC_LOCK when we want
to disable write protection.
Signed-off-by: Olivier Martin <olivier.martin@proglove.de>
Preparation to introduce the Upper Link Layer (ULL) and
Lower Link Layer (LLL) split architecture.
- Move SoC dependent HAL to vendor specific folder.
- Preparation to split data structures into ULL and LLL
types.
- Added more role and state conditional compilations.
- Added some work-in-progress implementation of advertising
extensions, will be used as inspiration in the new split
architecture work.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Updates the MCUXpresso SDK to version 2.5.0 for applicable SoCs.
Wireless (KW*) and legacy (KL25) SoCs were not included in this
MCUXpresso SDK release and are therefore not updated here.
New in this release is SoC-level and board-level support for external
xip flash in the i.MX RT family.
For RT1050, we are now using the MCUXpresso SDK for the EVKB version of
the board, which correponds to an upgrade from A0 to A1 silicon.
However, we don't yet have Kconfigs in place to support A1 silicon part
numbers, and therefore add a simple cmake hack to convert A0 part
numbers to A1 part numbers.
The SDK flash driver interface also changed slightly in this release,
and thus the zephyr flash shim driver is updated accordingly.
Origin: MCUXpresso SDK
License: BSD 3-Clause
URL: mcux.nxp.com
Purpose: Provide device header files and bare metal peripheral drivers
for Kinetis, LPC, and i.MX SoCs.
Maintained-by: External
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
When MSI clock is available and in PLL-Mode (high accuracy), use it as
USB source clock. This allows to enable USB on STM34l475 disco iot
board without having to add external oscillator.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Add support for Low Speed External 32.768 kHz oscillator (LSE ).
Add support for MSI PLL-Mode offering an automatic calibration feature
in combination with the LSE. This allows the MSI to reach an accurate
+/-0,25% clock perfectly suitable for USB full-speed clock.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
The Kconfig option ETH_SAM_GMAC was missing it's dependency on
NET_L2_ETHERNET. Before this patch Kconfig was allowing users to
enable the driver, but the driver was not added because the CMake code
only adds the driver when NET_L2_ETHERNET.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Samples for cc3220sf_launchxl where assertions are enabled
(e.g. http_get) fail to build because some of the strings used in the
simplelink wifi driver have parentheses around them. This breaks the
current implementation of the __ASSERT macro. This commit removes
the parentheses, which are unnecessary.
http_get has been verified to build after this change.
Fixes#12192
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
Return actual pixel format that is in use by the SDL display driver
instead of returning a hard coded value.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
Make the following nRF peripheral drivers:
- ADC
- GPIO
- I2C
- SPI
- UART
- USB_DEVICE
enabled by default so that users do not need to explicitly enable them
in their applications after choosing an nRF SoC as the build target.
Kconfig options enabling these drivers depend on both a given hardware
feature (e.g. I2C) and an nRF family SoC selected, so effectively they
will be automatically enabled only when it is adequate (and in most
cases these drivers are the only option for a given hardware feature
on nRF SoCs).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Implementations of both flavors of serial drivers for Nordic SoCs
are no longer dependent on the gpio driver. Remove the dependency
from Kconfig.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Convert lsm9ds0_gyro driver to get the device name as well as
i2c slave information and gpio info for triggers from device tree.
Updates the build_all test accordingly.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Nordic UICR are non-volatile memory registers for
configuring user-specific settings. Basically it is subset of flash
memory available in the SoC.
Add support for operations on NVM which belongs to UICR.
UICR are written or read as ordinary flash memory.
For erasing UICR it is required to call erase with UICR start
address and its size (this is caused by what hardware supported).
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
nRF 16MHz clock is used by both BLE radio and temperature sensor.
During BLE connection if the temperature sensor is also used then
at some point assert condition is hit in temp_nrf5_sample_fetch().
The error code -EBUSY seen during clock_control_off() is that clock
is no longer needed for the temperature sensor, but it cannot be
just turned off because it is still needed for BLE connection.
Signed-off-by: Dhananjay Gundapu Jayakrishnan <dhananjay.jayakrishnan@proglove.de>
ieee802154_nrf5 uses net_analyze_stack function in a loop, which
prints logs at inf level. As net_core's log level is used in
this function which by default is set to inf, it kept spamming stack
usage logs.
Prevent this behavior by adding additional log level check in the driver
itself, so that this log will only be printed if
IEEE802154_DRIVER_LOG_LEVEL is set to debug.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Convert lsm9ds0_mfd accel/magn driver to get the device name as well
as i2c slave information from device tree. Updates the build_all
test accordingly.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Fixed channel type in get accel/magn channel routines,
where, by mistake, GYRO definitions were used instead of
ACCEL/MAGN ones.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Add support for SoF events to the USB STM32 device driver. When
CONFIG_USB_DEVICE_SOF is enabled, enable the corresponding interrupt
and provide a non-weak callback function calling status_cb.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Check for ARLO, BERR, OVR, and NACK errors during any kind of
transmission. Helps fix getting into a while(1) loop in any of these
scenarios when in polling mode.
Signed-off-by: Pushpal Sidhu <psidhu.devel@gmail.com>
This patch adds a flash driver for the STM32F7x series, inspired from
the STM32F4x one. It has been tested on the STM32F723, but should also
work on other SoCs of the family.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
On SoC families using a Cortex-M7, it is possible to flush only specific
cache lines. Therefore pass the offset and len so that the flush can be
done with more granularity.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
In general synchronisation between memory and the instruction cache
should be done explicitly, for example this is how it is done for RAM.
It is also done that way for flash writes in the current STM32 flash
driver.
However in case of flash erases, the current STM32 flash driver flushes
the i-cache. It probably doesn't make a big difference for the
Cortex-M3/M4 families as the cache is very small. That said it might
have bigger impact on families based on Cortex-M7 as it has between 4KB
and 16KB of i-cache, that will be added latter in this patch serie.
This patch therefore remove the i-cache flush in
flash_stm32_flush_caches.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This reduces the amount of #ifdef and keep all of them at the same
place. The empty function is then optimized-out by the compiler.
At the same time change the negative test by a positive one to simplify
adding new entries.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The timeout handling in the STM32 flash driver is currently a counter
in the busy check loop. This doesn't scale well across the whole STM32
family:
- The duration of the loop depends on the CPU speed, the activation of
caches.
- The duration of the longest flash operation (a sector erase as the
driver doesn't support mass erase) can varies a lot mostly depending
on the sector size, 2K on F0 and L4 families or 128K on the F4 family.
In addition the timeout can change depending if the writing thread is
prempted or not.
Fix that by defining a timeout in ms depending on the family, and using
k_uptime_get to get a precise measurement of the time.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
STM32 uart Kconfig instance flags were not following
same naming scheme than other drivers (i2c, spi, ..)
Update driver to use UART_X instead of UART_STM32_PORT_X
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Moving towards serialized fragmentation, adapting mac command creation
to avoid the need of ll_reserve etc...
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There is no need to reserve any space for each frag, as the l2 will
allocate a frag for the ethernet header, arp will do the same.
This is one step further to removing the concept of ll reserve.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
I2C transfers could simultaneous be called that would
cause an inconsistent state in NRFX I2C state (and HW).
The NRFX TWI driver would expect to be in state
`NRFX_DRV_STATE_INITIALIZED` while being in state
`NRFX_DRV_STATE_POWERED_ON`.
Signed-off-by: Olivier Martin <olivier.martin@proglove.de>
Improve initialization of the ADC.
After initialization with the default values, the clock source
of the ADC is asynchronous clock (ADACK) and clock divide ratio
is 8. The minimum conversion clock frequency is 1MHz.
Add clock divider selection and set default divide ratio to 1.
That sets the conversion clock frequency to approximately 5MHz.
Default configuration for the voltage reference is set to
external pins V_REFH and V_REFL. Depending on the MCU configuration
V_REFL may be connected to ground and V_REFH to VREF_OUT.
Since Voltage Reference block is not supported, the ADC does not work
properly on FRDM-KW41Z. Add voltage reference selection to fix it.
Enable self-calibration function as recommeded in Reference Manual.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
This definition was needed to translate the old symbol used in MDK
for accessing the GPIO peripheral in nRF51 SoCs (NRF_GPIO) to the
one used for all newer SoCs (NRF_P0). Now the translation is done
in the HAL for GPIO (nrf_gpio.h).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
In order to make use of the configurable bus width and burst size
options in memcpy mode, lets add configurations bits for the same.
This configuration is derived from the TRM of STM32F446xx Page No. 210
"Memory-to-memory mode" section and verified on 96Boards STM32 Sensor
Mezzanine board.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
This patch fixes a bug in System timer driver where
the sys_clock_disable() function was enabling the
timer instead of disabling it.
Change-Id: I4a667d30d43d1f84094d074241ee18d7bb2b2565
Signed-off-by: David Vincze <david.vincze@arm.com>
The introduction of -fno-common caused a link error in eswifi driver due
to lack of missing extern on eswifi_bus_ops_spi. Adding the extern
resolves the link error.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert lis2mdl magnetometer driver to get the device name as well
as i2c slave information from device tree. Updates the build_all
test accordingly.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
We were reading gPTP header from wrong position when parsing
it in RX and TX.
Fixes#11827
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This driver introduces an emulated LCD display for the native POSIX
board. The emulated display driver makes use of SDL2 to render the
displays frame buffer into a dedicated desktop window.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
Clear SSD1673 display during display driver initialization instead of
triggering clear via setting contrast.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
Do not initialize reset gpio on KW2XD SIP.
Modem's clock output is used by the SoC for the PLL.
Initialization of the reset gpio may result in the reset of the modem
and the crash of SoC.
Keep reset gpio low until modem initialization.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Fix overwrites update of indirect register.
Since the indirect register should be updated,
the parameter dreg should be false.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
If initialization fails, zero the API struct so that
device_get_binding() can't fetch it, and do not mark
the driver object as initialized to user mode.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Check clock_control_on return value now that it is checking appropriate
bus is used in the request.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Driver was not complaining when unsupported bus values where used.
Add default to switch cases and return error.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
GPIO pin interrupts share common EXTI resources.
Return an error when attempt to configure a line already in use.
Fixes#10611
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add symbolic names to trigger mode (LIS3DH_TRIGGER_MODE) in order to
be defined in board defconfig files.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Convert lis3dh accelerometer driver to get the device name as well
as i2c slave information from device tree. Updates the build_all
test accordingly.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
The header ipm_quark_se.h was creating a object. Hence removed it
and placed the same in ipm_quark_se.c
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Update such statistic on all drivers.
Also, remove TX stats in native and stellaris drivers: such update is
done in L2 now.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It's now either L2 which unref the pkt on successful tx, or net_if on
error.
Also removing pkt->frags check, net_core.c:net_send_data() does it
already.
And using data_len in logging instead of net_pkt_get_len(), which one is
currently greedy (it goes over all net_bufs).
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
FIX issue #10571 and #10593
atomic_xxx() functions expect the bit argument to be the
position index inside the target integer and not its
numerical representation (e. g. 5 means the 5th bit and not 32).
The original code could potentially override an adiacent variable.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Add a dts binding file for the cc1200 and move the Kconfig options for
SPI and GPIOs to DTS for the CC1200 driver.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
1. Created new shell module: shell_help.
2. Simplified command handlers with new shell print macros.
3. Removed help functions from command handlers.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Removed printing command help from help handler. It is now
realized by the shell engine. This change saves a lot of flash
but still allows to print help in command handler with function
shell_help_print.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Removing help "options" from shell API.
Currently SHELL_OPT macro is not used by users. What is more
commit: a89690d10f ignores possible options created in
command handler by the user. As a result they are not printed
in help message.
Second, currntly implemented "options" in command handlers options are
implemented without SHELL_OPT macro.
And last but not least this change will allow to implement
help handler in a way that user will not need to think about calling
functions printing help in a command handler.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
This patch adds support for blocking tcp receive (with timeout).
This patch removes dedicated socket polling thread to use common
eswifi workqueue instead.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Current implementation unconditionnaly performs blocking connect
and send. Add support for non-blocking version using eswifi workqueue.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
The USB_UART_CONSOLE option itself is not enough to enable console on
the USB UART port. Most of the code is actually shared with
UART_CONSOLE, so this symbol has to be selected.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Fix issue caused by 3fc497ac9a
This change removes `rtt` and `systemview` from header includes
as these are already placed in the path.
Also `SEGGER_SYSVIEW_ConfDefaults.h` header included from
`SEGGER_SYSVIEW_Int.h` is placed higher to make sure `INLINE`
definition is properly visible.
Signed-off-by: Pawel Dunaj <pawel.dunaj@nordicsemi.no>
L2 is the one who requests the packet to be sent, and not via net_if API
anymore. Stellaris driver was merged right after this behaviour change
and was thus lacking the proper modification.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Nordic devices detect edge interrupts through the PORT event which is
generated on a rising edge of DETECT, which itself is asserted when any
GPIO is configured for sense level detection and the GPIO's input signal
matches the configuration.
The previous code in Zephyr attempts to detect when at least one GPIO
SENSE signal is still asserted, and intentionally leaves the PORT event
uncleared to ensure the interrupt is re-entered.
This approach fails when no pin satisfies its SENSE condition during the
check but at least one input changes level between the completion of the
check and the clear of the PORT event. Such a failure can be observed
on the pca20020 hardware when multiple sensors configured for level
triggers are active. In this situation the corresponding sensor trigger
signals remain asserted but the PORT event required to drive their
processing has already been cleared.
The fix is to ensure that the SENSE configuration for all GPIOs across
all port instances is disabled prior to unconditionally clearing the
PORT event, then re-enabling the SENSE configuration for all GPIOs once
callbacks associated with detected SENSE triggers have been performed.
The act of re-enabling will ensure any relevant SENSE condition causes a
new rising edge on DETECT and so a new PORT event.
Closes issue #11806
See: https://devzone.nordicsemi.com/f/nordic-q-a/7246/missing-interrupts-on-gpioe-port-events
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
The driver can be tested using different networking emulation
approaches.
This approach will work across multiple Qemu instances. There can be
more than one Qemu instance, run using the following command. They
would appear to be on the same Ethernet network.
$ qemu-system-arm -M lm3s6965evb \
-serial stdio \
-net nic \
-net socket,mcast=230.0.0.1:1234 \
-kernel zephyr.elf
This approach will work with other virtualization technologies that
support connecting to a VDE switch, like VirtualBox and User Mode
Linux. The switch can be started using the following command.
$ vde_switch --sock /tmp/switch
Qemu can be connected to the switch using the following command.
$ qemu-system-arm -M lm3s6965evb \
-serial stdio \
-net nic \
-net vde,sock=/tmp/switch \
-kernel zephyr.elf
Signed-off-by: Fadhel Habeeb <fadhel@zilogic.com>
Signed-off-by: Nirav Parmar <niravparmar@zilogic.com>
Signed-off-by: Vijay Kumar B <vijaykumar@zilogic.com>
The LFSTARTED event was disabled so it was impossible to wake the
CPU up on LF clock being ready. The Bluetooth stack was putting
the CPU to sleep, expecting to be woken up on LFSTARTED event.
As the event never triggered, the CPU was woken up seconds later
by a different event introducing a multi-second startup delay.
Bug introduced by 23c92100ac.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
SetAddress request (0x05) is ignored and not propagated, because it
is handled by nRF hardware. Curently, request type is not checked
causing class or vendor request 0x05 to be inappropiately ignored.
Only standard requests (type = 0) shoud be ignored. This commit
fixes the issue.
Signed-off-by: Paweł Zadrożniak <pawel.zadrozniak@nordicsemi.no>
If gPTP is enabled, then enable also PTP clock driver so that
gPTP sync starts to work properly for native_posix board.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The PTP driver was init too late which prevented gPTP from
working in native_posix board.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This patch fixes the uart isr calling the callback with wrong data
(#11465) and the uart_poll_in checking the wrong status flag.
Signed-off-by: Diego Sueiro <diego.sueiro@gmail.com>
A typo in the name of the bmRequest field in the nrfx_usbd_setup_t
structure was fixed in nrfx version 1.4.0. Update the driver to use
the new correct name: bRequest.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
If compiling with gPTP support for native_posix board, then avoid
compile error that is seen with gptp sample application.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Fragmented long CTRL OUT transfers does not work properly, because
they were not handler properly by the shim. In such transfers,
a special call (nrfx_usbd_setup_data_clear()) must be performed
before every data packet and not just before the first one.
This patch adds a byte counter which is set while processing setup
packet (host->device only) to be able to decide whether there will
be more data packets coming (and to call_data_clear() or not).
Fixes#11232 .
Signed-off-by: Paweł Zadrożniak <pawel.zadrozniak@nordicsemi.no>
Add support for SoF events to the USB SAM device driver. When
CONFIG_USB_DEVICE_SOF is enabled, enable the corresponding interrupt
and call the callback function from there.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
When running sanitycheck for reel_board which selects
CONFIG_NRFX_TWIM it fails the following tests:
tests/misc/test_build/test_newlib
tests/kernel/errno/kernel.common.errno.newlib
tests/lib/mem_alloc/libraries.libc.newlib
/zephyr/drivers/i2c/i2c_nrfx_twim.c:144:3: error: expected declaration
specifiers or '...' before '(' token
(bitrate == I2C_BITRATE_STANDARD ? NRF_TWIM_FREQ_100K \
^
/zephyr/drivers/i2c/i2c_nrfx_twim.c:151:3: note: in expansion of macro
'I2C_NRFX_TWIM_FREQUENCY'
I2C_NRFX_TWIM_FREQUENCY( \
^~~~~~~~~~~~~~~~~~~~~~~
/zephyr/drivers/i2c/i2c_nrfx_twim.c:184:1: note: in expansion of macro
'I2C_NRFX_TWIM_DEVICE'
I2C_NRFX_TWIM_DEVICE(0);
^~~~~~~~~~~~~~~~~~~~
/zephyr/drivers/i2c/i2c_nrfx_twim.c:154:3: error: expected declaration
specifiers or '...' before string constant
"Wrong I2C " #idx " frequency setting in dts"); \
^
/zephyr/drivers/i2c/i2c_nrfx_twim.c:184:1: note: in expansion of macro
'I2C_NRFX_TWIM_DEVICE'
I2C_NRFX_TWIM_DEVICE(0);
^~~~~~~~~~~~~~~~~~~~
zephyr/drivers/i2c/CMakeFiles/drivers__i2c.dir/build.make:62: recipe
for target
'zephyr/drivers/i2c/CMakeFiles/drivers__i2c.dir/i2c_nrfx_twim.c.obj'
failed
To fix this, let's replace the use of static_assert() with a more
generic macro: BUILD_ASSERT_MSG() This should work across minimal
libc, newlibc and c++.
Signed-off-by: Michael Scott <mike@foundries.io>
As for Ethernet, up to ieee802154 L2's send to actually sent the packet.
It's currently unoptimized as 6lo compression, 15.4 fragmentation and so
on will reallocate net_buf etc... but it's the first step towards
removing ll reserve space and more.
Applying changes to Openthread L2 as well.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now instead of such path:
net_if_send_data -> L2's send -> net_if tx_queue -> net_if_tx -> driver
net_if's send
It will be:
net_if_send_data -> net_if tx_queue -> net_if_tx -> L2's send -> driver
net_if's send
Only Ethernet is adapted, but 15.4 and bt will follow up.
All Ethernet drivers are made compatible with that new scheme also.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The sensor signal cannot be cleared by the application, so enabling
level triggers causes the system to hang as the callback is invoked
repeatedly. We want notification when the alarm state is entered, and
when it's exited, so use a double edge.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Add symbolic names to bus type (LIS2DH_BUS_TYPE) and trigger mode
(LIS2DH_TRIGGER_MODE) in order to be defined in board defconfig
files.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Convert lis2dh accelerometer driver to get the device name as well
as i2c/spi slave information from device tree. Updates the build_all
test accordingly. (issue #11605)
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Two subtractions failed to account for the possibility that a calculated
time exceeded the counter resolution, allowing a comparison to
improperly indicate that a minimum delay was satisfied.
Use the subtraction helper to avoid the problem.
(The subtraction in z_clock_set_timeout was the cause of issue #11694;
the one in rtc1_nrf5_isr was replaced based on inspection rather than
testing.)
Closes#11694
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
poll_out function was returning the character that was sent. It
happens that it is always constant and the return of this functions is
never tested. Changing it to be a void function.
MISRA-C rule 17.7
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The comment was incorrect explaining why we were sending an
AT-command without waiting for a response (via a K_NO_WAIT timeout).
Let's correct the comment and avoid confusion.
Signed-off-by: Michael Scott <mike@foundries.io>
Remove overly complicated logic to skip incoming data if we were
still waiting on a previous set of data to be read.
This fixes a bug where an error during data receive could end up
with the modem ignoring all incoming data.
Signed-off-by: Michael Scott <mike@foundries.io>
Remove an unnecessary local variable to store the
return value, instead return directly thereby saving
few bits of memory.
Found using Coccinelle.
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Remove an unnecessary local variable to store the
return value, instead return directly thereby saving
few bits of memory.
Found using Coccinelle.
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Fixed the return values for read and write APIs for spin_nor.c
which were not inline with what the corresponding interfaces
were meant to return.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
Current implementation had fixed initial speed, this commit
fixes TWI and TWIM shims to use configuration from DTS.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
Coverity complains that packet_len can get assigned a negative value if
usb_dc_ep_mps() returns an error. This is correct, however it only
happens if the endpoint address is invalid, and in that case the value
is not used as the endpoint address is also validated in
usb_dc_ep_write().
Fix the issue by moving the assignment after the endpoint address
validation and by accessing the value directly instead of getting it
through usb_dc_ep_mps().
Fixes#11481
Coverity-CID: 189742
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Start of Frame events can now be accessed from USB classes.
This will be useful when implementing idle rate functionality.
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
Implements setsockopt() for the socket offload driver
to process the TLS tags sent in via the Zephyr setsockopt() API,
when CONFIG_NET_SOCKETS_SOCKOPT_TLS is chosen.
For each tag, the credential filenames are retrieved and
set via SimpleLink's sl_SetSockOpt() API.
Also, creates a new KConfig option for TLS_CREDENTIAL_FILENAMES.
This new option is used by apps/protocols to add TLS credentials
via filenames referring to the actual content stored on a secure
file system or flash.
Handles the IPPROTO_TLS_* socket protocol families in the
socket() offloaded API.
This was validated on the cc3220sf_launchxl with the http_get sockets
sample, with the globalsign_r2.der file loaded to secure flash via
the TI Uniflash tool, and using the TI Catalog of known good
root CA's.
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Enable cache operations before starting a DMA operation if the CPU has a
cache. All the support was already in place, it just needs to be
enabled.
With the previous commits, it allows the I2S tests to pass on a SAM E70
Xplained board with the CPU cache enabled.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This effectively reverts part of earlier 49bb163756 which moved
interrupt acknowledgement until after return from the user callback.
This was done confusing the flow of this driver with how some other
drivers do it, where pending interrupt status is checked by
uart_irq_rx_ready()/uart_irq_tx_ready(), which should be called by
the callback. But the uart_cmsdk_apb driver actually uses different
hardware register in these functions. And acking IRQs after user
callback can lead to race condition and losing an IRQ, and the
simple fix in this case is just move acknowledgement to where it
was before.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Nordic USB driver shim uses nrfx_usbd driver from nrfx package.
The driver was protected by a semaphore during every transfer
to prevent access from multiple threads at the same time.
This leads to the problem when a class schedules transfer on one
endpoint before host asks for the data (to be sent later) - driver
is locked and other endpoints (including control EP) are blocked.
Currently, only driver calls are wrapped with semaphore without
waiting for the transfer to complete, allowing scheduling transfers
on different endpoints. This is allowed bu nrfx_usbd, however
shim prevents user from scheduling multiple transfers on one
EP (required by nrfx_usbd).
Signed-off-by: Paweł Zadrożniak <pawel.zadrozniak@nordicsemi.no>
Calling fifo_fill function from uart_nrfx_uarte in the same
interrupt more than once, would break previous transmission.
Following fix adds checking if previous data was sent, and
if not, returns 0.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
The Interrupt Controller on the Quark D2000 doesn't support irq priority
to just pass 0 in the for the priority instead of CONFIG_ADC_0_IRQ_PRI.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We were hard coding the SPI bus name to "SPI_3". Instead we should use
DT_INVENTEK_ESWIFI_ESWIFI0_BUS_NAME as its generated from the device
tree.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The driver was using the straight alias generated defines, however we
want to use DT_ prefixed defines so its clear that the values are coming
from DT.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This ensures compatibility with Silicon Labs EXX32 MCU Series 1.
Signed-off-by: Gil Benkö <gil.benkoe@pm.me>
Signed-off-by: Christian Taedcke <hacking@taedcke.com>
Nothing builds this driver and the driver hasn't been updated to the new
ADC api so it does not compile. Remove it sinces its effectively dead
code.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We use the sector size rather than the page size as some
modules that consumes the flash page layout (such as FCB)
assume the page size is the minimal size they can erase.
Signed-off-by: Olivier Martin <olivier.martin@proglove.de>
This is a follow-up to commit b3ca789ef25627bcf7b02ec2aa7fa900fba37227.
Apparently, another driver needed to be updated but this was not caught
up in CI builds at that time.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Modem driver for WNCM14A2A was erroneously leaving the
selection of UART_INTERRUPT_DRIVEN up to CONSOLE_HANDLER.
Now, with the move to the new SHELL backend, this is no
longer happening.
Let's select it from the modem driver, instead of depending
on it.
Let's also add a dependency on SERIAL_SUPPORT_INTERRUPT
which the serial drivers enable to let us know
UART_INTERRUPT_DRIVEN is available.
Signed-off-by: Michael Scott <mike@foundries.io>
When users are configuring applications they are given the option
to enable the DesignWare SPI driver. But they should not be given this
option on SoCs that don't have the DesignWare SPI HW.
This commit hides the driver by default by introducing the config
option HAS_SPI_DW.
Fixes: #10825
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This patch adds a flash driver for the Atmel SAM E70 SoC. The driver has
been kept simple by considering that the flash is only composed of 8-KiB
blocks. Indeed an area at the beginning of the flash might be erased
with a smaller granularity, and the other blocks can also be erased with
a higher granularity. It also only handles the global read/write
protection, not the 128-KiB lock regions. A write error is returned if
a region is locked.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Enables Networking hardware on i.MX-RT type drivers.
Reuses the same eth_mcux driver used by Kinetis family; initialization
sequence refactored to work with this board as well. Unlike Kinetis
family, i.MX has a single ENET interrupt and we need to discriminate
between interrupts using a status register.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
The Zephyr console and shell interrupt processing assumes
a TX interrupt is evoked upon first enabling the TX
interrupt via uart_irq_tx_enable.
This was not the case with the cc32xx uart, coming out of
reset, with FIFO's disabled.
The only way found to achieve this behavior is to fill
the fifo with a non-printable character on initialization.
Also, the uart driver was explicitly clearing TX/RX interrupts in
its isr, which was unnecessary, as the act of reading/writing
did that implicitly.
These fixes allow the cc32xx uart to work with the
current Zephyr console/shell design.
Fixes: #11202
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
The commit 0c2ef4ea3d "drivers:
watchdog: Watchdog API redesign" introduced an API redesign for the
watchdog drivers compliant with Zephyr.
This patch updated the CMSDK Watchdog driver to be compliant with the
new API.
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Convert the Atmel SAM0 watchdog driver to the new watchdog API and
enable DTS support.
This fixes#10914.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Add driver for i.MX Messaging Unit peripheral which can be used for
i.MX6SoloX, i.MX7D and other i.MX socs.
Origin: Original
Signed-off-by: Stanislav Poboril <stanislav.poboril@nxp.com>
If the configuration is already installed, there will no need to
reconfigure the controller all over again.
This was missing for mcux_dspi, mcux_lspi, sam and sam0.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that the in tree user of cc2520 uses device tree to configure SPI
and GPIO params, we can remove and convert the driver to utilize DT
only. This means removing the Kconfig options that come from DT and
rename CONFIG_ to DT_ for those options.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
All drivers require DTS for their primary SPI settings.
Removing SPI_[0-9]_NAME config option added some more samples changes.
Usage of these options there was anyway not relevant.
Fixes#11064
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Now that all SPI controllers support DTS we can remove the Kconfig
support for non-DTS options. We also cleanup some defines that should
have be DT_MCR20A_ instead of CONFIG_MCR20A_.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The majority of cases of CONFIG_I2C_x_IRQ_PRI should be
DT_I2C_x_IRQ_PRI. So go ahead and fix them up. Only the i2c_nios
driver still uses Kconfig for getting priority.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
1. There's an expectations that TX ready (i.e. TX buffer space
available) interrupt is a level interrupt, i.e. always active
while there's TX buffer space available. In particular, there's
an expectation that after uart_irq_tx_enable(), the TX interrupt
will immediately fire (assuming free TX buffer space is available).
But CMSDK UART interrupt appears to be edge interrupt, firing only
on buffer state change. So, after irq_tx_enable(), we need to
"bootstrap" interrupt processing by calling user-defined ISR
manually (the ISR will see that TX ready to accept a new char,
will write it there, then we'll get interrupt once TX buffer is
ready again).
2. Interrupts should be acknowledges only after user ISR is called,
because the ISR will check the status of interrupts.
3. Update stale comments.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The majority of bits where already in place, but some minor support
get the driver name from DTS was needed. Now we select HAS_DTS_WDT
for the driver.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
In order to avoid changing the signature of spi_context_cs_control
function, which is used in every driver, let's just make it an alias to
a new version.
Fixes#10344
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Avoid nested C++ comments inside the C comment block due to MISRA-C
rule 3.1. Add ellipsis around the explanatory text instead.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Now that k_mem_slabs are tracked as kernel objects,
even though they have no user facing API, we can now
accept a pointer to one in the configure API.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The API wants a pointer to the memory block pointer for
some reason (even though it's unnecessary to the
implementation).
Compiler won't warn if a void * is passed instead of a
void **.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
If we just had the kernel's implementation, we could
just move this to lib/, but possible arch-specific
implementations dictate that we just make this a
syscall.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
These changes modify the function of reading port/pin,
function return logical sum of input pin value and
output pin values for a given port. It is now possible
to read the status of pins set as output.
Signed-off-by: Kamil Gawor <Kamil.Gawor@nordicsemi.no>
Allow to set debug also for RAW_CHANNEL and set general debug template
instead of networking one.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Move to using Kconfig (like other Atmel SAM drivers do) to specify the
pinmux setting for SAMe70 SoCs. Updated the sam_e70_xplained board to
set the default in Kconfig.defconfig instead of via board.h
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Converts the adxl362 sensor driver to get the device name and spi slave
properties from the device tree rather than Kconfig. Updates the
build_all test accordingly.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
We still have one platform using (for now) the pre-asm2 integration
where the timer interrupt was handled via custom assembly. It calls a
function named "_timer_int_handler" always, not the one we register
with IRQ_CONNECT.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This driver is inspired from the w25qxxdv SPI NOR flash driver which was
already implementing the CFI (Common Flash Interface) for its purpose.
To handle other NOR flash a flash id table (as Linux do) which contains
the geometry for a few SPI NOR flash based on their JEDEC ID has been
introduced.
We currently support the following flash:
- W25Q80
- W25Q16
- W25Q32
- S25FL216K
- MX25UM512
The read and write functions are able to handle more then one page at a
time and return the number of bytes read or write.
Also because every NOR flash expect to disable the write protection
before writing or erasing, the write enable command is now part of the
write and erase functions.
Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
Rewritten Xtensa CCOUNT driver along the lines of all the other new
drivers. The new API permits much smaller code.
Notably: The Xtensa counter is a 32 bit up-counter with a comparator
register. It's in some sense the archetype of this kind of timer as
it's the simplest of the bunch (everything else has quirks: NRF is
very slow and 24 bit, HPET has a runtime frequency detection, RISC-V
is 64 bit...). I should have written this one first.
Note also that this includes a blacklist of the xtensa architecture on
the tests/driver/ipm test. I'm getting spurious failures there where
a k_sem_take() call with a non-zero timeout is being made out of the
console output code in interrupt context. This seems to have nothing
to do with the timer; I suspect it's because the old timer drivers
would (incorrectly!) call z_clock_announce() in non-interrupt context
in some contexts (e.g. "expiring really soon"). Apparently this test
(or something in the IPM or Xtensa console code) was somehow relying
on that on Xtensa. But IPM is a Quark thing and there's no particular
reason to run this test there.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Rewritten driver along the lines of all the other new drivers,
implementing the new timer API. Structurally, the machine timer is an
up-counter with comparator, so it works broadly the same way HPET and
NRF do. The quirk here is that it's a 64 bit counter, which needs a
little more care.
Unlike the other timer reworks, this driver has grown by a few lines
as it used to be very simple. But in exchange, we get full tickless
support on the platform.
Fixes#10609 in the process (the 64 bit timer registers are unlatched
for sub-word transfers, so you have to use careful ordering).
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Reworked using the older hardware interface code, but with an
implementation of the new API only. Much smaller & simpler.
As yet, tested (manually) only on a nrf52_pca10056 board.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Rewritten along the lines of ARM SysTick. Implements only the new,
simplified API. MUCH smaller. Works with tickless pervasively. No
loss of functionality.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Many drivers won't need to implement z_clock_idle_exit() or
sys_clock_disable(). Make those weak stubs too.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Add a TICKLESS_CAPABLE kconfig variable which is used by the kernel to
select tickless mode's default automatically on drivers that support
it (rather than having to set the default per-board). Select it from
the ARM SysTick and Intel HPET drivers.
Also remove the old qemu_cortex_m3 default settings which this
replaces.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Qemu doesn't like tickless. By default[1] it tries to be realtime as
vied by the host CPU -- presenting read values from hardware cycle
counters and interrupt timings at the appropriate real world clock
times according to whatever the simulated counter frequency is. But
when the host system is loaded, there is always the problem that the
qemu process might not see physical CPU time for large chunks of time
(i.e. a host OS scheduling quantum -- generally about the same size as
guest ticks!) leading to lost cycles.
When those timer interrupts are delivered by the emulated hardware at
fixed frequencies without software intervention, that's not so bad:
the work the guest has to do after the interrupt generally happens
synchronously (because the qemu process has just started running) and
nothing notices the dropout.
But with tickless, the interrupts need to be explicitly programmed by
guest software! That means the driver needs to be sure it's going to
get some real CPU time within some small fraction of a Zephyr tick of
the right time, otherwise the computations get wonky.
The end result is that qemu tends to work with tickless well on an
unloaded/idle run, but not in situations (like sanitycheck) where it
needs to content with other processes for host CPU.
So, add a flag that drivers can use to "fake" tickless behavior when
run under qemu (only), and enable it (only!) for the small handful of
tests that are having trouble.
[1] There is an -icount feature to implement proper cycle counting at
the expense of real-world-time correspondence. Maybe someday we might
get it to work for us.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Newer, and much smaller driver written to the new timer API. Supports
all the features the old one did (including shutting off the clock
when clock_always_on is disabled), should be faster in practice, and
should be significantly more accurate due to the "lost cycle" trick
applied in z_clock_set_timeout().
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Add a dts binding for the Atmel WINC1500 WIFI chip. Update the
quark_se_c1000_devboard to utilize this binding as well as the wifi
sample app.
We now get all the GPIOs related to the Atmel WINC1500 from the device
tree.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
These changes were obtained by running a script created by
Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following
specification:
1. Read the contents of all dts_fixup.h files in Zephyr
2. Check the left-hand side of the #define macros (i.e. the X in
#define X Y)
3. Check if that name is also the name of a Kconfig option
3.a If it is, then do nothing
3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it
has neither of these two prefixes
4. Replace the use of the changed #define in the code itself
(.c, .h, .ld)
Additionally, some tweaks had to be added to this script to catch some
of the macros used in the code in a parameterized form, e.g.:
- CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS
- CONFIG_UART_##idx##_TX_PIN
- I2C_SBCON_##_num##_BASE_ADDR
and to prevent adding DT_ prefix to the following symbols:
- FLASH_START
- FLASH_SIZE
- SRAM_START
- SRAM_SIZE
- _ROM_ADDR
- _ROM_SIZE
- _RAM_ADDR
- _RAM_SIZE
which are surprisingly also defined in some dts_fixup.h files.
Finally, some manual corrections had to be done as well:
- name##_IRQ -> DT_##name##_IRQ in uart_stm32.c
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Update a couple of labels generated from DTS used directly (not through
dts_fixups) in TI CC2650 system initialization code and a few drivers
for this SoC.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Update a couple of labels generated from DTS used directly (not through
dts_fixups) in some serial drivers, to the reflect recent changes made
to the extracting script.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Specific code is present GPIO_DEVICE_INIT_STM32 in
GPIO_DEVICE_INIT_STM32 to handle LL_APB2_GRP1_PERIPH_AFIO bit.
Though, this bit is already included in device tree information,
in clocks property, 'bits' field, which carries for each GPIO,
both LL_APB2_GRP1_PERIPH_GPIOX and LL_APB2_GRP1_PERIPH_AFIO.
Hence, it is already taken into account in
CONFIG_GPIO_STM32_GPIO##__SUFFIX##_CLOCK_BITS and it is redundant
to handle it in GPIO_DEVICE_INIT_STM32 macro.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Convert the BMI160 to use Device Tree to get SPI and GPIO params instead
of Kconfig. Updated samples, tests, and arduino_101_sss board support
for this.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The error check was wrong, if we could send the packet then
we free it. If sending fails, then let the caller to decide
what to do with the packet.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add "Multicast Promiscuous Enabled" (RCTL_MPE) bit definition and
use it for the receive control register (RCTL) initialization.
Multicast needs to be enabled in order for IPv6 auto-configuration
to succeed.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
The initial sequence was wrong and led to the missing interrupt
problem with netdev backends where the incoming traffic
appears immediately (tap).
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Provide CONFIG macros for clocks bits and bus properties in fixup
files and use them to simplify logic in uart devices instanciation
code
Fixes#10448
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
CONFIG_ADC_DW_REPETITIVE and CONFIG_ADC_DW_DUMMY_CONVERSION aren't
defined anywhere so remove the associated code for these Kconfig
symbols.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The channels assigned to the controller are reordered so that the ones
previously used and now available for other purposes have continuous
numbers. When the controller can take advantage of the pre-programmed
PPI channels (when TIMER0 is used as the event timer), the now free
channels are 0-4, when it cannot, it is the channel 0.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Couple of findings which were revealed after changing
LOG_MODULE_REGISTER macro:
- missing semicolons after LOG_MODULE_REGISTER()
- missing LOG_LEVEL defines
- other
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Log configuration was included only in case NET_L2_IEEE802154 was
enabled. In case of open thread this is not the case.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Introduce new Kconfig option for selecting either slip or ethernet
connectivity to host.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Provide necessary error handling for `lis2dh_reg_read_byte` function
which might fail.
Also, use a common `status` variable to be used for storing the
error code.
Fixes#10590
Coverity-CID: 188733
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
The Kconfig variable for selecting neural network accelerator driver(s)
was changed from NEURAL_NET to NEURAL_NET_ACCEL
The CMakeLists.txt however, was not updated to use the updated variable
This commit updates CMakeLists.txt to include neural_net if
CONFIG_NEURAL_NET_ACCEL is defined.
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
The information extracted from the device tree is now used to initialize
GPIO device instances. Up until now the GPIO device driver made no use
of this information. Actual instance creation is still controlled using
the Kconfig method. Missing GPIO device tree nodes were added in the
process for STM32L073, STM32F413 and STM32F373.
The information for gpio instance initialization has already been
present for supported STM32 SoCs but remained unused. Changes in the
device tree had no effect on GPIO functionality and was essentially
redundant. Using the device tree for hardware description seems
plausible and less painful than a myriad of defines in some SoC
description header.
The change was implemented under the assumption that current device
trees provide a correct description of the SoCs. Base register addresses
and RCC register bits were not explicitly checked for each device.
Manual tests were executed on:
- NUCLEO-F103RB
- STM32F429I-DISCO
- STM32F746G-DISCO
- NUCLEO-F767ZI
Manual tests consisted of blinky on different GPIOs and pins on each
board.
sanitycheck was executed for all STM32 based boards
Fixes: #10629
Signed-off-by: Martin Bertsche <martin72216@googlemail.com>
Update stm32f469i_disco configuration to match with
default configuration guidelines:
-Configure available connectors
-Update yaml file
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Update stm32f723e_disco configuration to match with
default configuration guidelines:
-Configure available connectors
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Update stm32f769i_disco configuration to match with
default configuration guidelines:
-Configure available connectors
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Update stm32l496g_disco configuration to match with
default configuration guidelines:
-Deactivate features by default
-Configure available connectors
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Update disco_l475_iot1 configuration to match with
default configuration guidelines:
-Deactivate features by default
-Configure available connectors
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Rename USB_{DBG,ERR,INF,WRN} into LOG_{DBG,ERR,INF,WRN}. This driver has
been missed from PR #11001 as it has been committed after.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Check for case where host == NULL but service != NULL
could have resulted later in a NULL dereference.
Coverity-CID: 189516
Fixes#11090
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Use ARRAY_SIZE helper macro to compute size of array rather
than hardcoding.
Also, remove unnecessary variable to store the size which is
now useless.
Found using Coccinelle.
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Remove the redundant semicolon used as a terminator in
`if`, `switch`, `while` statements.
Found using Coccinelle.
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
This patch adds a USB device driver for the USBHS device that can be
found on Atmel SAM E70 SoC family. Only the FIFO mode is supported
(as opposed to DMA). It supports LS, FS and HS modes, but defaults to
FS mode as Zephyr does not fully support HS mode yet.
Tested examples on an Atmel SMART SAM E70 Xplained Board:
* usb/cdc_acm
* usb/hid-mouse
* usb/mass
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
i2c_burst_read can fail during read/write procedure. Therefore,
add a sanity check for its return value.
Fixes#11101
Coverity-CID: 189505
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Add dts binding and info for TRNG device and enable basic support to
get the device name from DTS. We leave for now the base addresses
coming from the MCUX HAL.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add dts binding and info for RNGA device and enable basic support to
get the device name from DTS. We leave for now the base addresses
coming from the MCUX HAL.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If we have DTS support for an entropy driver we should get the name
generated from DTS ('label' property on the entropy device node).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Fix RCOSC calibration initiation to ensure LF clock is
running; and the HF clock is running with crystal before
triggering the actual calibration in ISR.
Fixes#10811.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Convert gpio_cc32xx driver over to using device tree. Added binding
files, updates to dts for various SoCs that use cc32xx.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Driver for LSM303DLHC accelerometer now supports API function
sensor_attr_set for attribute SENSOR_ATTR_SAMPLING_FREQUENCY.
Signed-off-by: Dennis Wildmark <d.wildmark@gmail.com>
Add basic 'lspci' command to list PCI devices. This command can be
enabled with the new Kconfig PCI_SHELL.
Example:
uart:~$ lspci
0:1 8086:7010 class: 0x1, 1, 4, I/O, addrs: 0xC000-0xC00F, IRQ -1
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
If data is received before an IRQ handler was set and enabled,
hardware sets the ORE flag. Once set, the IRQ routine starts
hogging the CPU until ORE is cleared. This change will clear
the flag when user code attempts to drain incoming data.
Signed-off-by: Kiril Zyapkov <k.zyapkov@allterco.com>
Added bidirectional I2S support for Intel S1000
- Added implementation for I2S receive mode
- Extended driver instances to support 3 I2S ports
- Added DMA channel mappings for upto 4 I2S ports
- Utilized k_msgq to track buffers through the driver
- Allocate buffers for audio reception in the driver
- Free buffers after audio transmission in the driver
- Perform buffer reload for DMA after every reception/transmission
- Removed unused Kconfig variables
- I2S_CAVS_TX_BLOCK_COUNT
- I2S_CAVS_RX_BLOCK_COUNT
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
Added a mechanism to refresh DMA buffers without the
need to call the "configure" API every time.
The reload is done after every DMA completion.
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
k_poll_signal was being used by both, struct and function. Besides
this being extremely error prone it is also a MISRA-C violation.
Changing the function to contain a verb, since it performs an action
and the struct will be a noun. This pattern must be formalized and
followed and across the project.
MISRA-C rules 5.7 and 5.9
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Since CCOMPARE* registers have undefined values after reset,
set compare value first before enabling timer interrupt.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Update the uart_miv driver to get params like name, addr, baud-rate,
clock freq from DTS generated defines. Fixup related board and soc code
as needed.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The DTS changes introduced in 7ae220c845
changes the naming of GPIO related macros. This updates the usage
of previous macros via DTS fixup.
Fixes#10993
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Fix misspellings in Kconfig files that show up in the configuration
documentation (and make menuconfig screens).
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Adding watchdog driver for sam SoC. The current implemntation just
diables the watchdog on device boot.
This PR adds the following support for SAM3X, SAM4S and SAME70
1. Activate processor reset
2. Activate all reset
3. Generate interrupt on watchdog timer expiration.
Signed-off-by: Subramanian Meenakshi Sundaram <subbu147@gmail.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
There are two asserts in the ISR for clock events on the nRF5 that
appear to be accidental.
The first assert fails if there are any LF clock started events, which
there will be when starting up the RC oscillator with calibration.
The second assert fails when we decrement the refcount on the HF
oscillator after finishing a calibration. There will typically be
users left of the HF oscillator, so _m16src_stop() doesn't actually
stop it and thus doesn't return 0.
This code typically works fine because it's not built with asserts
enabled by default. Can be reproduced on a BBC microbit with the
default config plus CONFIG_ASSERT=y.
Signed-off-by: Jonas Norling <jonas.norling@greeneggs.se>
Since the mb_display driver is specific to the microbit we can move
the GPIO pin defines from board.h into the driver. This lets us remove
one of the few remaining drivers that is including board.h
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Macro is used to create contiguous bitmask between the
arguments passed to the macro.
BITS_PER_LONG is computed as the multiplication of predefined
macros `__CHAR_BIT__` and `__SIZEOF_LONG__`.
Both gcc and clang support these predefined macros.
With this change, replace the redundant defintions of
GENMASK with the new generic macro available.
Fixes#10843
Suggested-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
The dma_tx_callback() function signature is different than the one
required by struct dma_config. So change the signature to fix
a compiler warning.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
As RTT is used by more subsystem in Zephyr, initialization is moved
from RTT console and RTT logger backend to common kernel init phase.
Signed-off-by: Pavel Kral <pavel.kral@omsquare.com>
This option allows to explicitly include Segger RTT libraries and
enables use of it for various subsystems. It is disabled by
default as it consumes more RAM.
Signed-off-by: Pavel Kral <pavel.kral@omsquare.com>
This commit fixes the issue with non-default max packet size (<64).
The max packet size value was not passed to low-level driver
in norfic hal (nrfx_usbd) causing 64-byte being send regardless of
configured endpoint size. Size mismatch results in communication
error on Linux hosts.
Signed-off-by: Paweł Zadrożniak <pawel.zadrozniak@nordicsemi.no>
Check the return value of i2c_reg_read_byte() and return
if unable to read the register
Coverity-CID: 188740
Fixes#10585
Signed-off-by: Satya Bhattacharya <satyacube@gmail.com>
This commit introduces usage of likely()/unlikely() macros in order
to speed up the entropy_get_entropy_isr() API.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The entropy_nrf_get_entropy_isr(), which is specific to this driver,
is in fact equivalent of generic entropy_get_entropy_isr(..., 0).
This commit removes the entropy_nrf_get_entropy_isr() function
and replaces its usage by call to generic entropy API.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
This commit optimizes access to device data using direct reference
instead of relying on the driver_data field in the device structure.
Such approach saves few cycles on time-critical paths.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The old algorithm managing random number pools was inefficient and
prone to race conditions. Moreover, its behaviour was not compatible
with the API (provided buffers were filled from the end, leaving
beggining of the buffer untouched if there was not enough random data).
The new implementation is a bit faster and it is race-free as long as
all callers of the entropy_get_entropy_isr() are executed in
"run-to-completion" mode.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
This commit changes the argument passed to ISR to the pointer
to device data structure, removing one dereference in the interrupt
handler.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
This commint replaces function names by more accurate ones.
For example, the isr(), was renamed to rng_pool_put(), which
clerarly indicates what this function is doing.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The entropy_nrf5_get_entropy_isr(..., ENTROPY_BUSYWAIT)
unconditionally started and stopped hardware random number generator
disrupting management of random data pools implemented by the driver.
Moreover, simultaneous call to mentioned function from different
priorities led to hangup of lower priority call as hardware was
stopped by higher priority call while the other one waited for data.
This commit solves mentioned problems by moving the responsibility
for stopping hardware to the interrupt handler. As result hardware
is stopped only when there is no blocking calls to the
entropy_nrf5_get_entropy_isr() as well as all random data pools
are full.
This commit also fixes interrupt management in the mentioned
function, as previous implementation unconditionally enabled
interrupt causing problems similar to the described above.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Neither entropy_nrf5_get_entropy_isr() nor isr() protected
access to hardware. As result in some situations a random value
could be "stolen" by a higher priority call interrupting one
of the mentioned functions.
This commit solves this problem by introducing random_byte_get()
which accesses hardware atomically.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The nrf_rng HAL uses barriers on SoCs which need them to ensure
that all register writes will reach the peripheral immediately.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Align the dma_callback() signature to the new one in order
to avoid warnings during compilation.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
drivers/bluetooth/hci/spi.c: In function ‘bt_spi_open’:
drivers/bluetooth/hci/spi.c:475:31: error: passing argument 2 of ‘gpio_init_callback’ from incompatible pointer type [-Werror=incompatible-pointer-types]
gpio_init_callback(&gpio_cb, bt_spi_isr, BIT(GPIO_IRQ_PIN));
^~~~~~~~~~
In file included from drivers/bluetooth/hci/spi.c:9:0:
include/gpio.h:247:20: note: expected ‘gpio_callback_handler_t {aka void (*)(struct device *, struct gpio_callback *, long unsigned int)}’ but argument is of type ‘void (*)(struct device *, struct gpio_callback *, unsigned int)’
static inline void gpio_init_callback(struct gpio_callback *callback,
^~~~~~~~~~~~~~~~~~
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
es-WiFi compatible modules use IWIN AT command set.
This driver is split into several layers:
- bus layer: interface to transmit AT commands (SPI, USB, UART...)
- core layer: es-WiFi module management (state, scan...)
- offload layer: TCP/IP offload operations (connect, listen...)
This driver has been tested with stm32l4 disco iot board
(disco_l475_iot1) and the wifi sample:
$ select wifi
$ scan
$ connect "CISCO" 5 password
$ select net
$ tcp connect 192.168.1.21 4242
$ tcp send HelloWorld!
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
I have no idea what I was thinking when I wrote this.
But, it's an easy fix to remove the void * entirely.
Signed-off-by: Michael Scott <mike@foundries.io>
The nRF5x entropy driver does not depends on SOC_FAMILY_NRF is therefore
visible and selectable non-nRF5x SoCs. Fix that.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
There were several issues in the dts binding for the ssd1673 display:
* binding file mixed description & generation up together
* Use of BASE_LABEL
* orientation-flipped should have been of type boolean
Update the binding file to reflect these changes, and made associated
changes to dts_fixup.h and driver as needed.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Added support for SPI 1 available from the arduino connector (plus an
extra gpio). Tested against samples/sensor/bme280.
Signed-off-by: AJ Palmer <ajpcode@hotmail.com>
When users are configuring nRF applications they are given the option
to enable the DesignWare I2C driver. But they should not be given this
option because nRF SoCs do not have DesignWare I2C HW.
This commit hides the driver by default by introducing the config
option HAS_I2C_DW.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The logical NOT operator has a higher precedence than bitwise
AND operator. Therefore to make the test in if statement
correct, add parenthesis around the operands of bitwise
AND operator.
Found using Coccinelle.
Semantic Patch Language (SmPL) used:
<smpl>
@@
expression x;
constant C;
@@
- !x & C
+ !(x & C)
</smpl>
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
A few issues with the dts support for the SSD1306 display driver:
1. binding file mixed description & generation up together
- rename most uses of generation to description and add proper
generation field into yaml
2. Drop use of BASE_LABEL, this shouldn't be used by most bindings
3. dts defines that are being assumed in driver aren't correct. We
should be using a dts_fixup.h in the sample to map the generated
defines to those used in the driver. We remove the incorrect
defines that the driver assumes right now.
4. Fixup 'segment-remap' and 'com-invdir' properties that are booleans
in the binding file and associated code changes.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Change the default behaviour of the host network interface
setup. Now user needs to execute net-setup.sh script from
net-tools project to setup host ethernet interface. The script
needs to be run as a root user. Then zephyr.exe can be started
as a normal user.
Example:
cd net-tools
sudo ./net-setup.sh
This will create zeth network interface and set IP address and
routes properly. See other command line options by typing
./net-setup.sh --help
Old behaviour is still there if one enables
CONFIG_ETH_NATIVE_POSIX_STARTUP_AUTOMATIC=y
in which case one needs to use the command
sudo --preserve-env zephyr.exe
to start the Zephyr process.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Partially replaces Kinetis MCUX driver configuration from Kconfig to
Device Tree. Interrputs moved from defines configuration to DT.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
Now that log processing happens in a separate thread, the
BT_STACK_EXTRA macro is not needed (since there's no significant
overhead), and therefore the BT_STACK macros become unnecessary as
well.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This shell command was tied to bluetooth and the bluetooth shell and
also had messages all related to nordic ICs.
Make it generic and put it under drivers/flash/ so it can be included by
anyone and independently of bluetooth.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Provide basic commands for configuring/setting/reading GPIO ports.
> gpio conf ..
> gpio set ..
> gpio get ..
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Driver fxos8700 can also be used for the MMA8451
accelerometer and offers more functionality.
Revert the commit to avoid duplicate code.
This reverts commit 9c0d7813e5.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Add basic verification of the supported devices.
Add IDs for MMA8451, MMA8652, MMA8653 and FXOS8700 and
remove Kconfig FXOS8700_WHOAMI option.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
The 'value' param in ACCESS_BY_PORT mode means the state of a port,
one bit represented one pin in param 'value'.
Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
Add pin muxing for STM32F302x8 by sharing most of the definitions
of the STM32F303xC. Add USART3 for both the 302x8 and the 303xC.
Add a PWM that is specific to the 302x8.
Signed-off-by: Galen Seitz <galens@seitzassoc.com>
Introduces the location property and adds the ability to use values
generated by the device tree configuration.
Signed-off-by: Diego Sueiro <diego.sueiro@gmail.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Use user data to replace DMA's device pointer in
the callback function so that the user can retrieve
its context by that private data.
Signed-off-by: Jun Li <jun.r.li@intel.com>
I was pretty careful, but these snuck in. Most of them are due to
overbroad string replacements in comments. The pull request is very
large, and I'm too lazy to find exactly where to back-merge all of
these.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Now that the API has been fixed up, replace the existing timeout queue
with a much smaller version. The basic algorithm is unchanged:
timeouts are stored in a sorted dlist with each node nolding a delta
time from the previous node in the list; the announce call just walks
this list pulling off the heads as needed. Advantages:
* Properly spinlocked and SMP-aware. The earlier timer implementation
relied on only CPU 0 doing timeout work, and on an irq_lock() being
taken before entry (something that was violated in a few spots).
Now any CPU can wake up for an event (or all of them) and everything
works correctly.
* The *_thread_timeout() API is now expressible as a clean wrapping
(just one liners) around the lower-level interface based on function
pointer callbacks. As a result the timeout objects no longer need
to store backpointers to the thread and wait_q and have shrunk by
33%.
* MUCH smaller, to the tune of hundreds of lines of code removed.
* Future proof, in that all operations on the queue are now fronted by
just two entry points (_add_timeout() and z_clock_announce()) which
can easily be augmented with fancier data structures.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The current z_clock_uptime() call (recently renamed from
_get_elapsed_program_time) requires the driver to track a full 64 bit
uptime value in ticks, which is entirely separate from the one the
kernel is already keeping.
Don't do that. Just ask the drivers to track uptime since the last
call to z_clock_announce(), since that is going to map better to
built-in hardware capability.
Obviously existing drivers already have this feature, so they're
actually getting slightly larger in order to implement the new API in
terms of the old one. But future drivers will thank us.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Useful for tick-only drivers like Pulpino that don't support this.
Ideally we'd have a header-level interface definition for individual
timer drivers to eliminate the noop function call, but this is clean
for now (even the Pulpino hardware looks like it should support
timeouts just fine, so effort would be better spent there than on a
clean "ticked" interface).
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The tickless driver had a bunch of "hairy" APIs which forced the timer
drivers to do needless low-level accounting for the benefit of the
kernel, all of which then proceeded to implement them via cut and
paste. Specifically the "program_time" calls forced the driver to
expose to the kernel exactly when the next interrupt was due and how
much time had elapsed, in a parallel API to the existing "what time is
it" and "announce a tick" interrupts that carry the same information.
Remove these from the kernel, replacing them with synthesized logic
written in terms of the simpler APIs.
In some cases there will be a performance impact due to the use of the
64 bit uptime call, but that will go away soon.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Rename timer driver API functions to be consistent. ADD DOCS TO THE
HEADER so implementations understand what the requirements are.
Remove some unused functions that don't need declarations here.
Also removes the per-platform #if's around the power control callback
in favor of a weak-linked noop function in the driver initialization
(adds a few bytes of code to default platforms -- we'll live, I
think).
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The existing API had two almost identical functions: _set_time() and
_timer_idle_enter(). Both simply instruct the timer driver to set the
next timer interrupt expiration appropriately so that the call to
z_clock_announce() will be made at the requested number of ticks. On
most/all hardware, these should be implementable identically.
Unfortunately because they are specified differently, existing drivers
have implemented them in parallel.
Specify a new, unified, z_clock_set_timeout(). Document it clearly
for implementors. And provide a shim layer for legacy drivers that
will continue to use the old functions.
Note that this patch fixes an existing bug found by inspection: the
old call to _set_time() out of z_clock_announce() failed to test for
the "wait forever" case in the situation where clock_always_on is
true, meaning that a system that reached this point and then never set
another timeout would freeze its uptime clock incorrectly.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
There were three separate "announce ticks" entry points exposed for
use by drivers. Unify them to just a single z_clock_announce()
function, making the "final" tick announcement the business of the
driver only, not the kernel.
Note the oddness with "_sys_idle_elapsed_ticks": this was a global
variable exposed by the kernel. But it was never actually used by the
kernel. It was updated and inspected only within the timer drivers,
and only so that it could be passed back to the kernel as the default
(actually hidden) argument to the announce function. Break this false
dependency by putting this variable into each timer driver
individually.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The system tick count is a 64 bit quantity that gets updated from
interrupt context, meaning that it's dangerously non-atomic and has to
be locked. The core kernel clock code did this right.
But the value was also exposed to the rest of the universe as a global
variable, and virtually nothing else was doing this correctly. Even
in the timer ISRs themselves, the interrupts may be themselves
preempted (most of our architectures support nested interrupts) by
code that wants to set timeouts and inspect system uptime.
Define a z_tick_{get,set}() API, eliminate the old variable, and make
sure everyone uses the right mechanism.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This was another "global variable" API. Give it function syntax too.
Also add a warning, because on nRF devices (at least) the cycle clock
runs in kHz and is too slow to give a precise answer here.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This just got turned into a function from a "variable" API, but
post-the-most-recent-patch it turns out to be degenerate anyway.
Everyone everywhere should always have been using the kconfig variable
directly, and it was only a weirdness in the tickless API that made it
confusing. Fix.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The existing API defined sys_clock_{hw_cycles,ticks}_per_sec as simple
"variables" to be shared, except that they were only real storage in
certain modes (the HPET driver, basically) and everywhere else they
were a build constant.
Properly, these should be an API defined by the timer driver (who
controls those rates) and consumed by the clock subsystem. So give
them function syntax as a stepping stone to get there.
Note that this also removes the deprecated variable
_sys_clock_us_per_tick rather than give it the same treatment.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Configure spi chip select based on pinmap defines, add support
for hardware chip select control support.
Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
Adding 'bsd' to the include path causes problems when gnuarmemb is
used. The wrong errno.h will be used in the build, causing unresolved
references to ENOTSUP.
See PR #10554 for more details.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
IRQ_CONNECT calls in the SiFive GPIO driver were misconfigured when the
conversion to DeviceTree support occurred.
Signed-off-by: Nathaniel Graff <nathaniel.graff@sifive.com>
Define a SPI baud rate, as well as WS2812_STRIP_ONE_FRAME and
WS2812_STRIP_ZERO_FRAME values, that work for nRF5 devices.
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
The given defaults were chosen for 96b_carbon, which is an STM32F4X
board that supports the specified WS2812_STRIP_SPI_BAUD_RATE exactly.
Rather than assume the rest of the world works that way, guard the
Kconfig options accordingly.
This is preparation work for adding configuration for other hardware.
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
At least on nRF52 devices, we are taking too much time between pixels
dealing with overhead inside the SPI driver transceive calls. This is
leading to dropped frames, because the dead time between frames is
long enough (5000ns+) to look like a reset pulse to the LED strip.
Given this SPI driver limitation, it seems this LED driver's design
decision to rely on SPI peripherals as efficient pulse generators
doesn't work well in practice.
The right way to handle this is probably to switch from SPI to
efficient inline assembly which bit-bangs the pulses with interrupts
disabled.
This is what other efficient libraries do to drive this type of
LED (e.g. FastLED uses C++ templates that expand into such
assembly). The Zephyr GPIO API doesn't support doing that in a
portable fashion, unfortunately.
For now, we'll cheat by pre-allocating enough buffer space to send the
entire strip's worth of data.
This is preposterously inefficient (8x memory overhead since there's
one byte to make a SPI frame for each bit of color), but makes the
driver work correctly.
(Note that using timer peripherals as pulse generators, when combined
with DMA for efficiency, would also lead to similar levels of
overhead.)
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
Depend on the new SOC_COMPATIBLE_NRF symbol instead of the
SOC_FAMILY_NRF symbol.
This allows the driver to be used from the bsim simulated board
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Simplify the Kconfig dependency for the nrf timer driver.
CLOCK_CONTROL_NRF5 depends on the SOC_FAMILY_NRF already.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Depend on the new SOC_COMPATIBLE_NRF symbol instead of the
SOC_FAMILY_NRF symbol.
This allows the driver to be used from the bsim simulated board
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
patch adds the device binding for qmsi watchdog and device node
for socs which are using wdt qmsi driver.
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When the driver was changed to use the new logging subsystem, it used
LOG_DOMAIN_REGISTER should have been LOG_MODULE_REGISTER.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Added support to LIS2MDL Magnetometer sensor provided
with following features:
- I2C interface
- Mag data
- Temperature data
- ODR configurable by config or at runtime
- Trigger mode selectable by menuconfig
- IRQ pin configurable (by dts or Kconfig)
- Hard Iron offset setting at runtime
- Include yaml file
Tested on ST MEMS IKS01A2 + NUCLEO STM32F411RE board.
LIS2MDL connected to I2C master interface (SPI 3 wire not
supported yet).
Test run with all ODR {10, 20, 50, 100} Hz in poll and
trigger mode.
GPIO IRQ dts configuration has been tested by adding
to boards/arm/nucleo_f411re/nucleo_f411re.dts file
this patch:
&i2c1 {
status = "ok";
clock-frequency = <I2C_BITRATE_FAST>;
+
+ /* ST Microelectronics LIS2MDL mag sensor */
+ lis2mdl-magn@1e {
+ compatible = "st,lis2mdl-magn";
+ reg = <0x1e>;
+ irq-gpios = <&gpioa 4 0>;
+ label = "LIS2MDL";
+ status = "ok";
+ };
};
and adding boards/arm/nucleo_f411re/dts.fixup with following
content:
ST_STM32_I2C_V1_40005400_ST_LIS2MDL_MAGN_1E_LABEL
ST_STM32_I2C_V1_40005400_ST_LIS2MDL_MAGN_1E_BASE_ADDRESS
ST_STM32_I2C_V1_40005400_ST_LIS2MDL_MAGN_1E_BUS_NAME
ST_STM32_I2C_V1_40005400_ST_LIS2MDL_MAGN_1E_IRQ_GPIOS_CONTROLLER
ST_STM32_I2C_V1_40005400_ST_LIS2MDL_MAGN_1E_IRQ_GPIOS_PIN
For more info on this LIS2MDL please follow this link:
http://www.st.com/en/mems-and-sensors/lis2mdl.html
Signed-off-by: Mario Tesi <mario.tesi@st.com>
Previously, it printed a line like:
0:2 8086:100e class: 0x2, 0, 0, MEM,addrs: 0xfebc0000-0xfebdffff, IRQ 11
There's visibly a missing space in "MEM,addrs", this patch adds it.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
* Add usbd_dc_nrfx shim
The shim is based on the previous one usbd_dc_nrf5.
For handling the USBD hardware, tested nrfx_usbd driver from nRF SDK
was used.
Briefly tested examples:
* usb/cdc_acm
* usb/dfu (USB communication only due to flash handling issues)
* usb/hid-mouse
* bluetooth/hci_usb
Signed-off-by: Paweł Zadrożniak <pawel.zadrozniak@nordicsemi.no>
This offloads the getaddrinfo() socket operation to the
simplelink WiFi driver, via a socket_offload hook.
This was validated using http_get on cc3220sf_launchxl.
Also implements freeaddrinfo().
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
STM32 I2S driver implementation. It has been designed in the most
generic way possible, with the possibility of using it in master/slave
and rx/tx mode. Currenty it has been tested for master rx mode only
using the microphone on ArgonKey board.
The configuration file permits to compile it for STM32F4xx product
family only, but it should be easy to extend it also for other
families.
It supports all 5 STM32F4xx I2S controllers (I2S 1/4/5 on APB2 and
I2S 2/3 on APB1).
It makes uses of the available DMA channels for rx/tx streams.
The clock source can be selected among one of the following two choices:
- PLLI2S pll, with possibility to configure PLLM/PLLN/PLLR
- HSE/HSI clock
Interrupt is triggered only in case of errors (FRM/OVR/UDR).
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Previously, '\n' in LOG_DBG statements were added to
improve readability, by ensuring IP address weren't printed
across typical console terminal line boundaries.
But with the logging updates, '\n' is no longer
getting automatically expanded to \r\n, and a new timestamp
is automatically added, throwing off attempts at alignment.
This patch finally just removes the '\n''s from the log messages,
and cuts a few longer messages into separate messages.
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Also, defines one LOG_MODULE_NAME for the simplelink WiFi driver, and
uses the same name for all files in this driver (module).
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Previously, the NWP (Network Coprocessor) was configured during
simplelink_init().
Since the SimpleLink "FastConnect" feature was added,
meaning an automatic reconnect can occur at this time, this
results in early callbacks into the network stack
before it was fully initialized, resulting in a NULL iface
ptr being sent in as argument.
Now, for safety, the NWP startup is moved later to iface_init,
where it more logically belongs.
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
STM32L4 series USB LL API doesn't provide HIGH and HIGH_IN_FULL speed.
Define them on drivers level.
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
i2c-priv.h is currently doing some logging and is included in various
i2c drivers, make sure the logger is enabled for those drivers.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Happy Gecko has 2 USART not UART and also supports more pin locations.
Signed-off-by: Marcio Montenegro <mtuxpe@gmail.com>
Signed-off-by: Christian Taedcke <hacking@taedcke.com>
This patch adds a driver for Intel PRO/1000 Gigabit Ethernet controller.
The driver currently supports only a single instance of the NIC.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Convert gpio_gecko driver over to using device tree. Added binding
files, updates to dts for various SoCs that use gpio_gecko.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add support for CONFIG_SYSTEM_CLOCK_DISABLE so applications
may be compiled with CONFIG_REBOOT.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Limit the amount of bytes to write to EP0 to 64 bytes so that there is
no overflow or error when sending.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This commit removes the Kconfig symbol definitions
that signify the UARTE_1 pins. The symbols are
already removed for UARTE_0.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Deprecate API prefixed with sys_ring_buf_ and rename it
to ring_buf_item_ since this API is not a typical ring buffer
but ring buffer of data items (metadata + 32bit words).
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Compilation of this driver was broken by commit 07ff2d5
as reported in issue #10453. This commit is fixing it.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Rename log level variable:
CONFIG_LOG_GPIO_LEVEL to CONFIG_GPIO_LOG_LEVEL
Use template for log levels.
Register modules in drivers using logging.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Migrate from `SYS_LOG` to `LOG` logging mechanism.
Signed-off-by: Olivier Martin <olivier.martin@proglove.de>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add USB_DBG, USB_WRN, USB_ERR, USB_INF macros
in usb_device header file and remove them
from usb device drivers.
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
These devices increase the page size from 2k (standard STM32L4) to 4K,
so we must account for this.
Signed-off-by: Pushpal Sidhu <psidhu.devel@gmail.com>
This patch checks whether memory to memory is allowed for the device.
Tested it with tests/drivers/dma with one of the 2 settings:
CONFIG_DMA1_NAME=DMA_0 -> test fails with error message on console
and an error at configuration.
CONFIG_DMA2_NAME=DMA_0 -> test succeeds
Fixes: #7547
Signed-off-by: Alexander Polleti <metapsycholo@gmail.com>
Move to getting the clock frequency of the uart from the device tree
instead of a define in the board file. Cleaned up hifive1 board code to
reflect this change in addition to the driver.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add the missing bits to the yaml, dts, and Kconfig to enable GPIO pin
generation based on device tree.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Following log subsystem rework, a warning poped-up in SYS_LOG_ERR
in spi_stm32_get_err macro.
Fix it by casting SPI_STM32_ERR_MSK on (u32_t)
Fixes#10380
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Adding spaces around "=" when definining Kconfig template so
that is more consistent with overall style of these template
variables.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add the needed bits to get device tree support for the GPIO controller
on the Zedboard-Pulpino. This will allow us to move LED & button info
into the board.dts.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The commit 8592501828
("net: Remove s_addr/s6_addr defines from in_addr/in6_addr")
did a (welcomed) removal of a #define s_addr for which the SimpleLink
SDK was checking, breaking the socket_offload driver build.
This patch fixes the driver to work with this new, better
s_addr symbol definition.
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Group the entries by pin number and then sort them by alternate
function. This helps when editing the file.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Adds getaddrinfo and freeaddrinfo to the offloaded API.
Signed-off-by: Joakim Andre Tønnesen <joakim.tonnesen@nordicsemi.no>
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Every board that uses dts-enabled spi drivers has a board-level dts, so
there is no need to have separate configs HAS_DTS_SPI_PINS and
HAS_DTS_SPI.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Every board that uses dts-enabled gpio drivers has a board-level dts, so
there is no need to have separate configs HAS_DTS_GPIO_DEVICE and
HAS_DTS_GPIO.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Every board that uses dts-enabled spi drivers has a board-level dts, so
there is no need to have separate configs HAS_DTS_SPI_DEVICE and
HAS_DTS_SPI.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Every board that uses dts-enabled i2c drivers has a board-level dts, so
there is no need to have separate configs HAS_DTS_I2C_DEVICE and
HAS_DTS_I2C.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Selects HAS_DTS_GPIO in various gpio drivers that already support dts,
similar to how we select HAS_DTS_SPI in spi drivers and HAS_DTS_I2C in
i2c drivers.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Starting with glibc 2.20, there is warning when _BSD_SOURCE is defined
but not _DEFAULT_SOURCE (in /usr/include/features.h around line 184).
Sanitycheck turns this warning into error. So define _DEFAULT_SOURCE
at build time for native.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Under GNU C, sizeof(void) = 1. This commit merely makes it explicit u8.
Pointer arithmetics over void types is:
* A GNU C extension
* Not supported by Clang
* Illegal across all ISO C standards
See also: https://gcc.gnu.org/onlinedocs/gcc/Pointer-Arith.html
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
Makes the designware spi driver consistent with other spi drivers by
selecting HAS_DTS_SPI in the driver. This required adding spi nodes and
dts fixups to several arc and x86 socs, as well as enabling those nodes
in associated boards.
Also refactors the driver to use the base address, interrupt number, and
interrupt priority from dts.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Added a new UART driver for posix arch boards.
The driver can be configured to either attach to a new
pseudo-terminal, or to connect to the invoking shell
stdin-out.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Makes the designware and qmsi i2c drivers consistent with other i2c
drivers by selecting HAS_DTS_I2C in the driver.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Fix 2 compile issues in RedHat/CentOS 7 for the native
ethernet driver due to a oldish glibc, which does not include
by default the needed structures.
+
Separate the native ethernet driver into its own library,
and set NO_POSIX_CHEATS for it, in case the Zephyr POSIX
library would eventually add support for any of the host functions
used in this driver.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Adding i2c slave requires overlay with node definitions and
proper aliases depending on driver implementation.
Modified i2c_slave_api test to use information from dts.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
Added basic PSoC6 UART driver and added two UART nodes in the PSoC6
device tree to have output from CM0+ and CM4 cores.
Signed-off-by: Nazar Chornenkyy <nazar.chornenkyy@cypress.com>
Signed-off-by: Oleg Kapshii <oleg.kapshii@cypress.com>
Replaces direct accesses to the peripheral registers structure
with the proper SAADC HAL function that appeared recently in nrfx.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This patch changes the behavior of the sensor. The sensor
will remain in sleep mode after initialization and will only
run the measurements once when sample_fetch is called.
This optimizes the power consumption of the sensor as it
stays in sleep mode most of the time.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Refactor and reorganize ALS and proximity setup functions.
Cleanup and reorder register, fix register fields.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Use a lower slot duration than the used erase slot duration
to speed up the interval of write operations when in sync
with active Bluetooth connections.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The code assumes that when the systick counter hits zero,
the timer interrupt will be taken before the loop can
read the LOAD/VAL registers, but this is not architecturally
guaranteed, and so the code can see a post-reload SysTick->VAL
and a pre-reload clock_accumulated_count, which causes it to
return an incorrectly small cycle count. By adding a ISB we
overcome this issue.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
The lsm6dsl sensor driver incorrectly conditioned the interrupt pin
Kconfigs upon !HAS_DTS_SPI_PINS, when it should actually be
!HAS_DTS_GPIO_DEVICE.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Fixes casting warnings in multiple sensor drivers when creating their
own thread. These warnings were found when updating the build_all tests
to include missing sensor drivers.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The bmm150 sensor driver was missed in the conversion from kbuild to
cmake. This problem was found when updating the build_all tests to
include missing sensor drivers.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Fixes a compiler format warning in the bmi160 sensor driver. This
warning was found when updating the build_all tests to include missing
sensor drivers.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Fixes unused variable warnings for the adxl362 and lis2dh sensor
drivers. These warnings were found when updating the build_all tests to
include missing sensor drivers.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
New shell implementation is on the way. For now old one and all
references are kept to be gradually replaced by new shell.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The drivers/pinmux/dev directory doesn't containe any CMakeLists.txt
file, preventing to enable the PINMUX_DEV option. Fix that by providing
one.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Introduces a new mcux lpspi shim driver to be used on the imxrt soc.
This shim driver leverages heavily from the mcux dspi shim driver
because the MCUXpresso SDK provides similar APIs for the lpspi and dspi
peripherals.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Calculate proper initial PTP clock divisors based on the MCK value.
Additionally do not allow adjusting the rate of the clock. This does not
seem to work properly with current gPTP rate adjustment algorithm.
Having proper PTP clock divisors and callbacks that allow getting,
setting and adjusting current time is sufficient for proper gPTP
support.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
10 bit addressing is still not supported on nrf chips, but now
I2C_MSG_ADDR_10_BITS flag is checked.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
These mcux dspi driver configs are no longer used after legacy API
support was removed in commit 09dd5e9b22.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Any word started with underscore followed by and uppercase letter or a
second underscore is a reserved word according with C99.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The return of memset is never checked. This patch explicitly ignore
the return to avoid MISRA-C violations.
The only directory excluded directory was ext/* since it contains
only imported code.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The sensor driver Kconfigs are sourced inside an "if SENSOR..endif"
conditional, so it is redundant for sensor drivers to explicitly
"depends on SENSOR".
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
For each sensor driver, wrap all Kconfig symbols in a big if/endif
conditional rather than repeating "depends on" for each symbol.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
UART pins (TX, RX, RTS, CTS) are now configured in DTS files.
RTS and CTS definitions are optional. If flow control is enabled
and RTS/CTS pins are not defined, then compiler will issue
an error message.
Signed-off-by: Paweł Zadrożniak <pawel.zadrozniak@nordicsemi.no>
When config hw cycles=32768 max_wait_cycles maybe small than 60us.
The fix change the condition,make sure the wait time exceeds 80us.
Fixed#9816
Signed-off-by: Frank Li <lgl88911@163.com>
Replaces direct accesses to the peripheral registers structure
with the proper GPIOTE HAL function added recently to nrfx.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
If the SimpleLink WiFi driver is configured, and socket offload
enabled, this revectors the Zephyr BSD socket APIs to the SimpleLink
WiFi host driver BSD socket APIs, providing a
direct offload of the TCP/IP stack to the CC3220SF network
coprocessor.
Fixes#3706
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
This change adds DTS definition of SPI device for nRF chips.
It also removes SPI pin configuration from Kconfig and moves it to
chip DTS.
Signed-off-by: Filip Kubicz <filip.kubicz@nordicsemi.no>
The interval_us is supported by the adc_context code. It is not a
feature that the driver writer needs to code to support. Fixes
bug #9723.
Signed-off-by: Justin Watson <jwatson5@gmail.com>
Fixed return value check after HF clock is requested in
non-blocking mode.
hci_usb sample on nRF52840 SoC failed to enumerate USB
device on cold reset, the clock_control_on interface would
return -EINPROGRESS when clock is enabled in non-blocking
mode.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Missing clear pending RNG_IRQn when generating multiple
random numbers caused CPU to hang at __WFE call in the
loop waiting for new value.
This fixes commit ddb7f88f9e ("drivers: entropy: nrf5: Fix
ENTROPY_BUSYWAIT implementation")
Fixes#9523.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
After read first packet and if ERDPT < ERXRDPT,cause read Rx FIFO error.
The fix is to set ERDPT properly before reading next packet.
Fixed#9537
Signed-off-by: Frank Li <lgl88911@163.com>
Major rework of the mcux adc16 driver to convert it to the new adc api.
Currently supports a subset of the api features including synchronous
and asynchronous reads, and consecutive reads triggered by the kernel
timer.
Does not yet support some of the channel configuration options such as
gain and reference voltage because the hardware only allows these
options to be configured by peripheral instance rather than by channel.
The values are currently hardcoded in the driver, but in the future we
could introduce some flexibility per instance via device tree
attributes.
Does not yet support consecutive reads triggered by a hardware timer.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This commit adds translation layers to make nrfx drivers for the nRF
ADC (nRF51 series) and SAADC (nRF52 series) peripherals accessible via
the Zephyr's API. The SAADC peripheral is accessed using nrfx HAL only
as it turns out that usage of the nrfx driver in this case would be
inconvenient and would unnecessarily complicate the shim.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This commit replaces the API for ADC drivers with a reworked one.
As requested in the issue #3980, the adc_enable/adc_disable functions
are removed. Additionaly, some new features are introduced, like:
- asynchronous calls
- configuration of channels
- multi-channel sampling
Common parts of code that are supposed to appear in each implementation
of the driver (like locking, synchronization, triggering of consecutive
samplings) are provided in the "adc_context.h" file to keep consistency
with the SPI driver. Syscalls are no longer present in the API because
the functions starting read requests cannot use them, since they can be
provided with a callback that is executed in the ISR context, and there
is no point in supporting syscalls only for the channels configuration.
"adc_api" test is updated and extended with additional test cases,
with intention to show how the API is supposed to be used.
"adc_simple" test is removed as it does not seem to add much value.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Use Kconfig specific object "named choices".
Aim is to allow to define config choices selection in Kconfig.*
files instead of _defconfig and hence allow to keep flags
activation conditional.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
In polling mode, if a NACK is received during address transmission
the driver waits forever the ADDR flag. We need to check AF flag
and stop the transmission if it is set.
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
Acknowledge failure (AF) error occurs when the interface detects
a NACK bit. According to the reference manual, the transmitter
which receives a NACK must reset the communication:
– If Slave: lines are released by hardware
– If Master: a Stop or repeated Start condition must be generated
by software
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
Commit fixes two issues:
- Return correct value from gpiote_channel_alloc
- Check if pending event interrupt was not disabled
Jira:DESK-270
Fixes#9535
Signed-off-by: Pawel Dunaj <pawel.dunaj@nordicsemi.no>
When CONFIG_GPIO_SX1509B was not set, the related Kconfig options
were still showing up in .config. Let's make them depend on
GPIO_SX1509B so they can go away when not being used.
Signed-off-by: Michael Scott <mike@foundries.io>
This patch adds support for the Analog Devices ADXL372 ultra-low power,
3-axis, +/-200 g MEMS accelerometer. The ADXL372 can be either connected
via a SPI or I2C interface.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
In some cases the minimum time between Stop and Start was not being
considered when starting a new transfer.
This patches adds a checking on the I2C Bus Busy flag before starting
a new transaction.
Signed-off-by: Diego Sueiro <diego.sueiro@gmail.com>
Move to more generic tracing hooks that can be implemented in different
ways and do not interfere with the kernel.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Define generic interface and hooks for tracing to replace
kernel_event_logger and existing tracing facilities with something more
common.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This patch provides support needed to get timing related
information from riscv32 based SOC.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
This patch provides support needed to get timing related
information from nios2 based SOC.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
This patch provides support needed to get timing related
information from xtensa based SOC.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
The benchmark application timing_info needs certain hooks to be
present in the kernel to get the accurate measurements. This
patch adds these hook at all the required locations.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
WDT_NRFX is now enabling by default. Its configuration from proj.conf
files was removed.
Signed-off-by: Karol Lasończyk <karol.lasonczyk@nordicsemi.no>
Remove DMA resource ownership configuration.
Such configuration will be done in an SoC level
initialization routine
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
Remove I2S resource ownership configuration.
Such configuration will be done in an SoC level
initialization routine
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
Add a CMakeLists.txt file for audio codec TLV320DAC
Updated drivers/CMakeLists.txt to include audio
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
Added an entry in drivers/Kconfig for audio
Added an entry in drivers/audio/Kconfig for audio codec
Added an Kconfig file in drivers/audio/ for TLV320DAC
Enabled audio coded in Intel S1000 CRB defconfig
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
Add ifdefs to the SiFive GPIO driver IRQ bindings to allow fewer than
32 pins to be configured based on the DTS configuration
Signed-off-by: Nathaniel Graff <nathaniel.graff@sifive.com>
After GPIO shim using NRFX has been implemented, old gpio_nrf5
shim is no longer needed.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
I removed GPIO configuration from board files and enabled them
as default in driver Kconfig file. All boards had GPIO ports
enabled that is why I decided to enable it by default.
Power management example was changed to use new driver.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
irq_lock returns an unsigned int, though, several places was using
signed int. This commit fix this behaviour.
In order to avoid this error happens again, a coccinelle script was
added and can be used to check violations.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Add support for the STM32 Real-Time-Clock leveraging the LL APIs
Signed-off-by: Johannes Hutter <johannes@proglove.de>
Signed-off-by: Kiril Zyapkov <k.zyapkov@allterco.com>
Add support for TI LP5562 I2C 4-channel LED driver.
Supported blinking period: 1ms - 1000ms
Supported brightness value: 0% - 100%
This driver supports the entire currently available API.
Signed-off-by: Johannes Hutter <johannes@proglove.de>
FE310 is the name of one SoC out of a range of products in the SiFive
Freedom line. The FE310 SoC port in Zephyr is compatible with all of
these products, so rename the SoC to SiFive Freedom
Signed-off-by: Nathaniel Graff <nathaniel.graff@sifive.com>
Add support for usbotg_fs, by adding the DT fixup, pinmux macros,
and the DT entries in stm32f2.dtsi.
Signed-off-by: Istvan Bisz <istvan.bisz@t-online.hu>
This commit is a fix for Issue #8226
- Error flags are assigned to the correct mailbox now.
- set_filter_mutex is moved from can_stm32_attach to the wrappers
can_stm32_attach_isr and can_stm32_attach_msgq. This protects
response_type variable.
- Waiting for empty mailbox semaphore return value
is checked for none zero values to check all error states.
- The mailbox tx_int_sem is reset before the sending is triggered.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
The eth_stm32_hal has been tested to work correctly on Nucleo-F207ZG,
Nucleo-F429ZI, Nucleo-F746ZG and Nucleo-F767ZI.
Signed-off-by: Daniel Egger <daniel@eggers-club.de>
This patch adds support for Ethernet in the STM32F2 family of
microcontrollers and enables it for the the Nucleo-F207ZG.
Signed-off-by: Daniel Egger <daniel@eggers-club.de>
Consistently use
config FOO
bool/int/hex/string "Prompt text"
instead of
config FOO
bool/int/hex/string
prompt "Prompt text"
(...and a bunch of other variations that e.g. swapped the order of the
type and the 'prompt', or put other properties between them).
The shorthand is fully equivalent to using 'prompt'. It saves lines and
avoids tricking people into thinking there is some semantic difference.
Most of the grunt work was done by a modified version of
https://unix.stackexchange.com/questions/26284/how-can-i-use-sed-to-replace-a-multi-line-string/26290#26290, but some
of the rarer variations had to be converted manually.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
A design flaw of 'gsource' is that there's no way to require at least
one file to match the glob pattern. This could lead to silent errors.
Switch to a new design, where a plain 'source' is globbing and requires
at least one file to match. A separate 'osource' (optional source)
statement is available for cases where it's okay for a pattern (or plain
filename) to not match any files.
'orsource' combines 'osource' and 'rsource' (relative source).
This commit search-replaces 'gsource' with 'source', but backwards
compatibility with 'gsource' is still maintained by making it an alias
for 'osource' (and by making 'grsource' an alias for 'orsource').
The three Kconfig files arch/{nios2,posix,xtensa}/Kconfig source
arch/{nios2,posix,xtensa}/soc/*/Kconfig, which doesn't match any files.
Use 'osource' for those. The soc/*/Kconfig files seem to be for
additional SoC-specific symbols, only none exist yet on those ARCHes.
Also use 'osource' for the source of $ENV_VAR_BOARD_DIR/Kconfig in
boards/Kconfig, which doesn't exist for all boards.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
In most Nordic SoCs the SPI and TWI peripherals with the same instance
number share certain resources and cannot be used at the same time.
In nRF52810 there are only single instances of these peripherals and
they are arranged in a different way so this limitation does not apply.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
User mode may now access the read, write, and trigger APIs.
Unlike supervisor mode, memory slabs are not dealt with directly,
the data is always copied.
A new driver API added to fetch the current channel configuration,
used by the system call handlers.
The i2s_sam_ssc driver updated for the new API. CAVS driver not
modified as there is no user mode port to Xtensa yet.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This commit removes redundant reads of RTC_COUNTER register
propagating optimizations made in the k_cycle_get_32() function.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The previous implementation of _timer_cycle_get_32() (which is directly
mapped to k_cycle_get_32()) taken from 87 to 132 cycles. As result it
was too heavy for using it as source of time for logger.
This commit makes this function faster by removing redundant access
to the RTC register (each access consumed 28 CPU cycles) as well as
loop, which made this call non-deterministic.
After these changes the k_cycle_get_32() needs only 50-52 cycles
in to calculate 32-bit timestamp.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
A race condition was identified during the initialization of the
driver when the trigger function is enabled. This exposed two issues:
1 - The fxas21002_handle_int is trying to acquire the semaphore before
it gets initialized. To solve this we need to initialize the
semaphore before calling the fxas21002_trigger_init function.
2 - During the fxas21002_trigger initialization the i2c bus is used
(from fxas21002_handle_int function) at the same time as the
fxas21002_set_power is being called. To fix this we need to
initialize the semaphore with 0 and just release it after calling
the fxas21002_set_power function in the fxas21002_int
Signed-off-by: Diego Sueiro <diego.sueiro@gmail.com>
A race condition was identified during the initialization of the
driver when the trigger function is enabled. This exposed two issues:
1 - The fxos8700_handle_int is trying to acquire the semaphore before
it gets initialized. To solve this we need to initialize the
semaphore before calling the fxos8700_trigger_init function.
2 - During the fxos8700_trigger initialization the i2c bus is used
(from fxos8700_handle_int function) at the same time as the
fxos8700_set_power is being called. To fix this we need to
initialize the semaphore with 0 and just release it after calling
the fxos8700_set_power function in the fxos8700_int
These two scenarios was reproducible in the WaRP7 board with i.MX7 SoC.
Signed-off-by: Diego Sueiro <diego.sueiro@gmail.com>
Up until now, Zephyr has patched Kconfig to use the last 'default' with
a satisfied condition, instead of the first one. I'm not sure why the
patch was added (it predates Kconfiglib), but I suspect it's related to
Kconfig.defconfig files.
There are at least three problems with the patch:
1. It's inconsistent with how Kconfig works in other projects, which
might confuse newcomers.
2. Due to oversights, earlier 'range' properties are still preferred,
as well as earlier 'default' properties on choices.
In addition to being inconsistent, this makes it impossible to
override 'range' properties and choice 'default' properties if the
base definition of the symbol/choice already has 'range'/'default'
properties.
I've seen errors caused by the inconsistency, and I suspect there
are more.
3. A fork of Kconfiglib that adds the patch needs to be maintained.
Get rid of the patch and go back to standard Kconfig behavior, as
follows:
1. Include the Kconfig.defconfig files first instead of last in
Kconfig.zephyr.
2. Include boards/Kconfig and arch/<arch>/Kconfig first instead of
last in arch/Kconfig.
3. Include arch/<arch>/soc/*/Kconfig first instead of last in
arch/<arch>/Kconfig.
4. Swap a few other 'source's to preserve behavior for some scattered
symbols with multiple definitions.
Swap 'source's in some no-op cases too, where it might match the
intent.
5. Reverse the defaults on symbol definitions that have more than one
default.
Skip defaults that are mutually exclusive, e.g. where each default
has an 'if <some board>' condition. They are already safe.
6. Remove the prefer-later-defaults patch from Kconfiglib.
Testing was done with a Python script that lists all Kconfig
symbols/choices with multiple defaults, along with a whitelist of fixed
symbols. The script also verifies that there are no "unreachable"
defaults hidden by defaults without conditions
As an additional test, zephyr/.config was generated before and after the
change for several samples and checked to be identical (after sorting).
This commit includes some default-related cleanups as well:
- Simplify some symbol definitions, e.g. where a default has 'if FOO'
when the symbol already has 'depends on FOO'.
- Remove some redundant 'default ""' for string symbols. This is the
implicit default.
Piggyback fixes for swapped ranges on BT_L2CAP_RX_MTU and
BT_L2CAP_TX_MTU (caused by confusing inconsistency).
Piggyback some fixes for style nits too, e.g. unindented help texts.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Fixed the ENTROPY_BUSYWAIT implementation from vectoring to
RNG ISR which was preventing the busywait loop to hang
waiting on the VALRDY event which was getting cleared in the
ISR.
Fixes#9356.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
User can take the zeth interface down by issuing "net iface down <idx>"
shell command. It is possible to take the interface up by typing
"net iface up <idx>" in shell. These commands are important for
native_posix as there is no physical cable that can be connected
or disconnected.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use the HAS_HW_NRF_* symbols instead of the SOC_SERIES_NRF* ones
to filter out the driver options unavailable on particular SoCs.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Selecting the type of driver (SPI, SPIM, or SPIS) to be used for
a given SPI instance is mandatory, so the "optional" modifier is
inappropriate for related choice options in the driver's Kconfig.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Use the HAS_HW_NRF_* symbols instead of the SOC_SERIES_NRF* ones
to filter out the driver options unavailable on particular SoCs.
Add comments explaining why the SPIM driver is not available for
nRF52832.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The refactor to add callback user data param in 57286afd, contained
typo just for this driver. It sneaked past the PR CI due to the fact
that issue affected just a couple of platforms, and we select just
a few of them randomly for PR CI (vs full CI).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Most of this code is unreachable with priority queues disabled because
of queue id validation.
Fixes#9295.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Enable LLDP TX support on the slip ethernet driver.
Now when CONFIG_NET_LLDP is enabled, one can easily verify on a sniffer
(i.e. wireshark) that LLDP frames are being sent at the configured
interval with all mandatory TLVs enabled.
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Allow user to configure a program that is executed after the
network interface is created and IP address is setup.
This can be used e.g., to start wireshark to capture
the network traffic of the interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
These settings enable use of the WNC-M14A2A LTE-M modem as the default
network interface for the nRF52840-DK board (nrf52840_pca10056).
They include the following settings when MODEM_WNCM14A2A is selected:
- UARTE1 pin setup
- DTS / DTS fixup additions for WNC-M14A2A
- Kconfig settings for modem driver
Signed-off-by: Michael Scott <mike@foundries.io>
These settings enable use of the WNC-M14A2A LTE-M modem as the default
network interface instead of ethernet.
They include the following settings when MODEM_WNCM14A2A is selected:
- UART 2 setup
- Avoid ETH_0 setup due to pin conflicts
- DTS addition for WNC-M14A2A
- Kconfig settings for modem driver
Signed-off-by: Michael Scott <mike@foundries.io>
Add a set of modem shell commands to support modem development.
Start with:
modem list: Lists all registered modems and related information
modem send <modem receiver index> <command>: Send command to modem
Signed-off-by: Michael Scott <mike@foundries.io>
The WNC-M14A2A (LTE / LTE-M) modem is presented as an Arduino-
compatible shield via AT&T's IoT Starter Kit v1.0. It was
originally intended to work with the FRDM-K64F board, but
in theory as long as the right pins are configured it can
work with any board that supports Arduino-compatible headers.
The driver utilizes the CONFIG_NET_OFFLOAD setting to avoid the
normal handling of IP packets, and instead uses a socket-like
UART interface to handle incoming and outgoing data.
Signed-off-by: Michael Scott <mike@foundries.io>
Modem drivers need a fast buffer-based receiver for passing data
back and forth from the UART to the driver. This provides an
efficient configuarable driver which merely sends and receives
but doesn't process the data, that's left up to the modem driver.
Signed-off-by: Michael Scott <mike@foundries.io>
This is a finishing commit in 802.1Qav support for SAM GMAC. It adds a
possibility to get and set all parameters required by the standard.
Note that to be fully compliant it requires a proper system
configuration, but the prioritizing mechanisms will work just fine
without it so it is not enforced in any way.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
If the application is using TC configuration compatible with HW
configuration (equal number of traffic classes and hardware queues)
setup the screening registers and chose queues based on the chosen TC
mapping.
Use the VLAN priority and hard-coded mappings only as a fallback.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Updating Qav params made it implicitly enable the Qav support itself.
Since we can now control the on/off status with a management request,
this is not a desired behavior.
Make it read the original register value before updating params and then
writing back what it was before.
Additionally we now have to explicitly enable Qav support in init.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
The standard (and therefore the upper layer) is using bits per second,
the registers in SAM GMAC uses bytes per second - do the conversion
before writing the reg.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Zephyr UART drivers offer very low-level functionality. Oftentimes,
it would be useful to provide higher-level wrappers around UART
device which would offer additional functionality. However, UART
driver irq callback routine receives just a pointer to (low-level)
UART device, and it's not possible to get to a wrapper structure
(without introducing expensive external mapping structures). This
is an indirect reason why the current UARt wrappers - uart_pipe,
console - are instantiated statically just for one underlying UART
device and cannot be reused for multiple devices.
Solve this by allowing to pass an arbitrary user data to irq
callback, set by new uart_irq_callback_user_data_set() function.
Existing uart_irq_callback_set() keeps setting a callback which
will receive pointer to the device.
While public API maintains compatibility, drivers themselves need
to be updated to support arbitrary user data storage/passing (as
legacy uart_irq_callback_set() functionality is now implemented in
terms of it).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
do_cbc_decrypt() was not accounting IV's size in the input buffer.
Note that tinycrypt expects that IV and cipher text to be contiguous,
but input length must consider only the cipher text.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
unistd.h was missing (used by read, close..)
printk header was also missing, but replace it's use
with posix_print_trace: It is faster and does not require
any Zephyr functionality to work.
fflush is not needed in this case.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
The native_posix random driver uses random() and srandom()
whicha are old XOPEN POSIX extension (part of POSIX 2001).
To avoid compiler warnings due to the host libC headers
not including this prototypes otherwise, let's define
this 2 macros.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
A few function prototypes were missing in the native_posix
board and its drivers.
Let's add them.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
- Get rid of duplicate I2C dependencies, which show up in the
documentation as e.g. 'I2C && I2C'. The 'source's in
drivers/i2c/Kconfig are already within an 'if I2C' block.
- Factor out I2C_GPIO_<n> dependencies in drivers/i2c/Kconfig.gpio into
'if I2C_GPIO_<n>' blocks.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Fix the implementation to correctly check the status of
HFCLK and LFCLK states with respect to the requested
sources.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added Kconfig option and implementation to support a
non-blocking startup of 32KHz crystal oscillator.
This will reduce the time from boot to application start
while the crystal startup happens in background.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
- Remove redundant 'n' defaults. 'n' is the default value for bool
symbols.
This makes the auto-generated documentation clearer as well: You get
"implicitly defaults to n" instead of
"- n if <propagated dependencies>".
- Shorten
<type>
prompt "foo"
to
<type> "foo"
This works for all types, not just bool.
- Various formatting nits.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
There are too many individual requests for Qav related parameters. There
are more Qav parameters that need to be supported (and will be supported
soon - both on the GET and SET side). Handling it the way it was handled
so far would render the eth mgmt API dominated by Qav parameters. That
would make the file hard to read and understand.
Instead of that - use a single GET and SET requests for all Qav
parameters. This works by adding a separate enum with Qav request type
to the ethernet_qav_param struct.
Additionally this approach makes it much easier to document it all since
we now have just a single request and documentation comments in the
ethernet_qav_param struct.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
ports_enable array holds port clock information.
It is populated for all SoCs, but ports availability depends on
SoCs. The way it is defined today, location of the port in the
array depends on previous ports definition in SoC CMSIS files.
Though, port index is always the same irrespective of previous
ports availability in the SoC.
This will result in incoherency between port index and clock
information.
Fix this by setting a bogus value if port is not defined.
Return an error if bogus value is read.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Only basic features supported initially but more could be added from:
https://www.nxp.com/docs/en/data-sheet/MMA8451Q.pdffixes#9006
A sample app will be provided in a separate PR.
Signed-off-by: Lars Knudsen <larsgk@gmail.com>
This commit makes the driver enable HW Qav support for all available
priority queues.
Note that the hardware doesn't support setting the deltaBandwidth
parameter directly, but it is possible to do this by calculating it
from the negotiated link speed.
The default settings are set according to 802.1Qav 34.3.1, that says:
The recommended default value of deltaBandwidth(N) for the highest
numbered traffic class supported is 75%, and for any lower
numbered traffic classes, the recommended default value is 0%.
The default/recommended values can be changed using the ethernet
management API (set_config) - which this commit also adds.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Handle getting the number of priority queues. The total number of queues
for this driver is configured in kconfig so it is as simple as returning
a defined value in this case.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Follow the packet sending error code in the driver. If packet
cannot be sent, then return <0 to the caller and do not free
the packet. In practice this is not happening here but follow
this general rule anyway.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
For each driver/model with command line options.
Move its code for the board file into the driver/model file.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
This adds the necessary driver structs to support a total of 8
I2C controllers. This also allows each I2C controller to have
its own PCI vendor/device IDs.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Use both PTP Peer Event and PTP Event timestamping registers when
necessary.
Also for non-PTP frames just use current time.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
This commit adds support for multiple hardware TX and RX queues.
The number of the queues to use can be configured through defconfig.
Packets are sent and received through different hardware queues
depending on their priority.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
This commit fixes how the registers values are calculated and makes sure
there is no overflow effect when converting back to int.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
This commit makes the driver disallow drastic clock rate changes.
These changes happen mostly in the very beginning, when the timestamp in
hardware is zeroed.
In such cases the set callback is called soon after and fixes the large
offset. Without this limit the clock offset oscillates for a longer
period before it properly syncs as the requested ratio jumps between
very large and very small values.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
This commit fixes a memory leak happening when both gPTP and VLAN are
enabled.
It also moves the get_iface function up in the file so it is accessible
earlier without a redundant function declaration.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
This adds packet timestamping support to the GMAC driver.
It is based on the eth_native_posix and eth_mcux drivers.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
The pointers to pkt->frags->data are changed after transmitting.
Other layers (e.g. the gPTP drivers) assume that these will remain
unchanged. This patch adds a workaround for that issue and restores the
original pointers.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Bad function calls caused assertion errors in previous implementation.
This change introduces fixes to prevent those errors. In addition
nrfx_wdt_init function is moved to init function calling at the start of
zephyr.
There are additional changes. -EINVAL value is returning in install
function when watchdog timeout value is invalid (less or equal minimum
or greater than value supported by watchdog peripheral in Nordic's SoCs.
Additionaly condition to chech if low frequency clock is enabled was
removed. Watchdog peripheral requests LFCLK in hardware.
Signed-off-by: Karol Lasończyk <karol.lasonczyk@nordicsemi.no>
New nrfx version brings fixes also in watchdog implementation.
Previously introduced workaround for supporting more than one channel
can be changed to driver-management solution.
Signed-off-by: Karol Lasończyk <karol.lasonczyk@nordicsemi.no>
This patch changes the way the transmitter is handled in the UART
driver, so that it is activated only when there is something to send.
The current UART API does not allow to disable RX completely, since
the poll_in function description implies that UART must continuously
listen. To provide a way of disabling the entire UART and lowering the
current consumption, this patch adds the power management to the UART
driver. When instructed to enter any of the power saving states,
the driver will disable the UART, and it will enable the UART back
when it is switched again to the active state.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This enables the cc3220sf_launchxl to automatically
reconnect to the last good known access point (AP).
This method avoids the need to:
- perform a wifi scan for access points on bootup (saving power);
- include hard-coded SSID/passwords in the wifi application.
- include the wifi shell in the wifi application.
- rely on more complex provisioning methods;
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though, and is
inconsistent.
This will make the auto-generated Kconfig documentation have "No
defaults. Implicitly defaults to n." as well, which is clearer than
'default n if ...'
This is basically reapplying commit 133a299b50 ("drivers: i2c: Kconfig:
Remove redundant 'default n' properties"), which has been partially
reverted in commit c7875b75aa ("i2c: stm32_v2: implement slave
support").
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The STM32F7 uses the V2 version of the STM32 I2C controller. Add the
corresponding Kconfig, DTS, DTS fixup and pinmux entries.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Enable the driver to work in full-speed mode on OTG HS
controller using its full-speed or high-speed internal
PHY.
Please note that only one interface should be enabled
at a time, OTG FS or OTG HS. The driver will raise an
error if both are enabled.
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
Being stopped or not should not be a blocker on these settings (real
hardware can get these settings configured while not being in rx/tx
mode for instance).
Fixes#8528
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Intel SDM Vol3 10.5.4.1 states that "A write to LVT Timer Register that
changes the timer mode disarms the local APIC timer".
This implies that LVT Timer register needs to be programmed before
Initial Count register, otherwise the LOAPIC timer could not be armed.
Signed-off-by: Zide Chen <zide.chen@intel.com>
If IOREGSEL register is not accessed with 32 bits, it may not be
intercepted by type 1 hypervisor correctly.
Signed-off-by: Zide Chen <zide.chen@intel.com>
This extends the NS16550 driver to support 4 ports.
Also, this adds the necessary bits to enable PCI enumeration
on port 2.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
On some architectures tick time cannot be expressed as integer
number of microseconds, introducing error in calculations using
sys_clock_us_per_tick variable.
This commit deprecates the sys_clock_us_per_tick variable and
replaces its usage by more precise calculations based on
sys_clock_hw_cycles_per_sec and sys_clock_ticks_per_sec.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The advantage to this approach allows drivers for
devices that already keep statistics data on hardware
registers to use those instead, rather than try to
replicate it the same counters again within the driver
itself.
The eth_native_posix.c driver though do not benefit
from this, is modified to use the new callback system.
Suggested-by: Jukka Rissanen <jukka.rissanen@intel.com>
Signed-off-by: Jonathan Yong <jonathan.yong@intel.com>
The wifi_winc1500 driver's socket id is stored in
net_context->user_data, which may be overwritten later at
the socket layer, which also uses the net_context->user_data
field to store socket flags.
This patch introduces a dedicated offload_context field
for use by offload drivers, and updates the wifi_winc1500 offload
driver to use this field instead of user_data.
Fixes#8820
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
If VLAN is enabled for specific PTP interface, then manipulate
the ethernet header properly in this case.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This adds packet timestammping support to the driver and configures
various PTP options in ENET.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Julien Chevrier <julien.chevrier@intel.com>
The CONFIG_UART_NS16550_PORT_1_PCI was accidentally removed in
commit 26b474c987. So adds it back.
This allows PCI driver to probe the resources for port 1.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Use the same variable type for the odd bit handling
and fix the boolean expression warning with gcc 7.3.1.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
After running some tests which enable assert macro I found some issues
with the i.MX UART configuration.
This patch configures the Tx Fifo Watermark and Modem Mode accordingly.
Signed-off-by: Diego Sueiro <diego.sueiro@gmail.com>
In case of tickless kernel, k_busy_wait() calls __enable_sys_clock()
which in turn calls _set_time() with maximum RTC counter programmable
value. This will set the expected_sys_ticks to maximum tick value even
though there is no explicit timeout is requested from the kernel or from
an application. In this scenario, if an app calls k_sleep() which in
turn calls _add_timeout() which will adjust timeout value as per the
elapsed program time which based on incorrectly set expected_sys_ticks.
To fix this issue, we should not set the expected_sys_ticks in case
of __enable_sys_clock() as it just requests to run the counter but
a timeout event request.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
On 'drivers/i2c_esp32.c' there are functions useful for other
drivers. Functions and struct went moved to:
* arch/xtensa/soc/esp32/peripheral.h
* arch/xtensa/soc/esp32/soc.h
* include/drivers/gpio/gpio_esp32.h
Signed-off-by: Vitor Massaru Iha <vitor@massaru.org>
1. dts.fixup files updated with peripheral address and IRQ NUMBER.
2. Peripheral address is taken from DT.
3. IRQ number is taken from DT.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Place simplelink driver files into a subdirectory on par with
winc1500 subdirectory, to effect a better file organization.
No functional change in this patch.
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
This patch adds support for the Analog Devices ADT7420 High-Accuracy
16-bit Digital I2C Temperature Sensors. Optionally sensor threshold
events are supported.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
This commit removes the redundant definition of nRF GPIOTE
register structure that is present in gpio_nrf5.c. The gpiote
driver is adapted to use the register definitions directly
from Nordic MDK header files.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit removes the redundant definition of nRF GPIO
register structure that is present in gpio_nrf5.c. The gpio
driver is adapted to use the register definitions directly
from Nordic MDK header files.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The STM32F7 uses the same USB OTG FS controller than the STM32F4 series.
It is therefore trivial to add support for it, by adding the DT fixup
and pinmux macros, and the DT entries in stm32f7.dtsi. Keep it disabled,
it should be enabled at the board level.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Change define used to select interrupt driven functions
from CONFIG_UART_INTERRUPT_DRIVEN to CONFIG_UART_0_INTERRUPT_DRIVEN.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
1. Added support for two instances of UARTE.
2. Kconfig.nrfx is capable to configure UART and UARTE driver.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
In nsim, 'nsim_mem-dev=uart0,base=0xf0000000,irq=24'
is used to enable a virtual uart.
This uart is only used to output now, so only poll output
is implemented.
If required, input and interrupt driven are possible.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
The dependency on the GPIO driver was a bit artificial, since the UART
driver used the GPIO API functions only to configure the pins at its
initialization. This configuration will be done by using nrfx GPIO HAL
functions directly, just like in case when a shim is using
an nrfx driver underneath.
HAL functions can be fed with the absolute pin numbers, that are
currently used for Nordic SoCs in Kconfig and DT, and for the GPIO
driver an additional translation would be required, to extract
the port and its relative pin number.
UART driver has to be initialized at PRE_KERNEL_1 (because of the
console using it) and currently the GPIO driver is initialized
at POST_KERNEL stage, so calling its API function form the UART
initialization routine was incorrect.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Fixes issues caused in GPIO driver due to overlapping GPIOTE
channel use in nRF5 software PWM driver and in Bluetooth
controller for implementing PA/LNA feature.
The issue is solved by assigning the base and available
channel count for GPIOTE considering whether PWM and/or
PA/LNA feature is selected in the Kconfig.
Fixes#8815.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
clear RXNE flag in fifo_read, remove TEACK and REACK
check when uart_stm32_init because stm32f2 doesn't
has those flags.
Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
The DMA API provides dma_slot field as a method to configure at
runtime which peripheral DMA_request the DMA controller should
select.
This method allows to specify different selections for different stm32
DMA streams. So, all the Kconfig definitions, which by the way where
fixing the same selection for all DMA streams, have been deleted.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
The Transfer Complete (TC) interrupt as well as the Memory
Increment (MINC) bits were not enabled for Periperal To
Memory (and Memory to Peripheral) case.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
usb_dc_ep_write may be executed in an ISR context and should therefore
not take a semaphore with a timeout. The semaphore was initially
introduced to prevent USB buffer overwrite when writing to an endpoint
in a loop. This is not requested anymore since there is an existing USB
transfer API available.
Signed-off-by: Johannes Hutter <johannes@proglove.de>
DMA channel linked list items (LLIs) are allocated when the channel is
configured.
The LLIs should not be freed until the channel is de-configured
Hence, k_free of LLI memory is removed from stop handler.
Also, added code to disable the channel in stop handler.
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
When the PWM_NRFX Kconfig option is enabled, add the nrfx driver
to the build automatically by selecting the NRFX_PWM option (it is
a hidden one, so the user cannot do it manually via menuconfig).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Allow gPTP code to be run as a linux process and communicate
with gPTP daemon running in linux host.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This patch adds I2C Slave support conforming to the syscalls and funcs,
only for the STM32 V2 I2C Driver for the moment.
It is capable of handling multi-master bus setups.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Daniel Wagenknecht <wagenknecht@clage.de>
Add a new EEPROM simulated driver with all it's build infrastructure.
The EEPROM can be loaded/poked from applications by getting its funcs.
It is multi-instance capable, right now 2 instances are supported by
enabling them in KConfig.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Daniel Wagenknecht <wagenknecht@clage.de>
This patchs adds new I2C Syscalls for :
- I2C controllers slave support
- I2C Slave drivers support
I2C Controllers slave support adds 2 new ops to :
- register new slave driver
- unregister slave driver
Slave funcs consists on all the I2C phases :
- read or write request once address matches
- read or write done once the byte has been received/sent
- stop when the trasmit stops
I2C Slave drivers syscall are also added to make new
"I2C Slave" drivers to :
- register them to their I2C controller
- unregister them to their I2C controller
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
This patch restructures stm32_i2c_v2 drivers Interrupts:
- NACK failures trigger an I2C event interrupt, so move
handling of NACK failure from error isr to event isr.
- Extract logic of interrupt handling to static functions. Use
isr functions (event & error OR combined) to call these. This
reduces duplication between error isr and combined isr.
- Restructure the error interrupt handling, so that it has no effect
when no errors occured and thus can be called by combined isr.
- Change interrupt logic from if/else to pure ifs for each flag.
This reduces code paths and leads to one call of the isr handling
multiple interrupt conditions, if there's more than one I2C
interrupt flags set.
This is the way it's done e.g. in linux kernels (since 4.14)
drivers/i2c/busses/i2c-stm32f7.c
Signed-off-by: Daniel Wagenknecht <wagenknecht@clage.de>
In preparation to implementing slave and multi-master
capabilities for STM32 I2C V2 driver move the checks,
whether all messages of a transfer are valid, before
starting the transaction.
This prevents having to abort a transmission, that is
already partly transmitted.
Signed-off-by: Daniel Wagenknecht <wagenknecht@clage.de>
All the STM32F7 SoCs have a TRNG. Adding support for it is just a matter
of tweaking the #ifdef and including the right file from HAL.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though, and is
inconsistent.
This will make the auto-generated Kconfig documentation have "No
defaults. Implicitly defaults to n." as well, which is clearer than
'default n if ...'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though, and is
inconsistent.
This will make the auto-generated Kconfig documentation have "No
defaults. Implicitly defaults to n." as well, which is clearer than
'default n if ...'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though, and is
inconsistent.
This will make the auto-generated Kconfig documentation have "No
defaults. Implicitly defaults to n." as well, which is clearer than
'default n if ...'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though, and is
inconsistent.
This will make the auto-generated Kconfig documentation have "No
defaults. Implicitly defaults to n." as well, which is clearer than
'default n if ...'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though, and is
inconsistent.
This will make the auto-generated Kconfig documentation have "No
defaults. Implicitly defaults to n." as well, which is clearer than
'default n if ...'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though, and is
inconsistent.
This will make the auto-generated Kconfig documentation have "No
defaults. Implicitly defaults to n." as well, which is clearer than
'default n if ...'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though, and is
inconsistent.
This will make the auto-generated Kconfig documentation have "No
defaults. Implicitly defaults to n." as well, which is clearer than
'default n if ...'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though, and is
inconsistent.
This will make the auto-generated Kconfig documentation have "No
defaults. Implicitly defaults to n." as well, which is clearer than
'default n if ...'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though, and is
inconsistent.
This will make the auto-generated Kconfig documentation have "No
defaults. Implicitly defaults to n." as well, which is clearer than
'default n if ...'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though, and is
inconsistent.
This will make the auto-generated Kconfig documentation have "No
defaults. Implicitly defaults to n." as well, which is clearer than
'default n if ...'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though, and is
inconsistent.
This will make the auto-generated Kconfig documentation have "No
defaults. Implicitly defaults to n." as well, which is clearer than
'default n if ...'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though, and is
inconsistent.
This will make the auto-generated Kconfig documentation have "No
defaults. Implicitly defaults to n." as well, which is clearer than
'default n if ...'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though, and is
inconsistent.
This will make the auto-generated Kconfig documentation have "No
defaults. Implicitly defaults to n." as well, which is clearer than
'default n if ...'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though, and is
inconsistent.
This will make the auto-generated Kconfig documentation have "No
defaults. Implicitly defaults to n." as well, which is clearer than
'default n if ...'
Piggyback a missing 'source "drivers/gpio/Kconfig.imx"'. This file
wasn't included anywhere previously.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though, and is
inconsistent.
This will make the auto-generated Kconfig documentation have "No
defaults. Implicitly defaults to n." as well, which is clearer than
'default n if ...'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though, and is
inconsistent.
This will make the auto-generated Kconfig documentation have "No
defaults. Implicitly defaults to n." as well, which is clearer than
'default n if ...'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though, and is
inconsistent.
This will make the auto-generated Kconfig documentation have "No
defaults. Implicitly defaults to n." as well, which is clearer than
'default n if ...'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though, and is
inconsistent.
This will make the auto-generated Kconfig documentation have "No
defaults. Implicitly defaults to n." as well, which is clearer than
'default n if ...'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though, and is
inconsistent.
This will make the auto-generated Kconfig documentation have "No
defaults. Implicitly defaults to n." as well, which is clearer than
'default n if ...'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though, and is
inconsistent.
This will make the auto-generated Kconfig documentation have "No
defaults. Implicitly defaults to n." as well, which is clearer than
'default n if ...'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though, and is
inconsistent.
This will make the auto-generated Kconfig documentation have "No
defaults. Implicitly defaults to n." as well, which is clearer than
'default n if ...'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though, and is
inconsistent.
This will make the auto-generated Kconfig documentation have "No
defaults. Implicitly defaults to n." as well, which is clearer than
'default n if ...'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though, and is
inconsistent.
This will make the auto-generated Kconfig documentation have "No
defaults. Implicitly defaults to n." as well, which is clearer than
'default n if ...'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though, and is
inconsistent.
This will make the auto-generated Kconfig documentation have "No
defaults. Implicitly defaults to n." as well, which is clearer than
'default n if ...'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though, and is
inconsistent.
This will make the auto-generated Kconfig documentation have "No
defaults. Implicitly defaults to n." as well, which is clearer than
'default n if ...'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though, and is
inconsistent.
This will make the auto-generated Kconfig documentation have "No
defaults. Implicitly defaults to n." as well, which is clearer than
'default n if ...'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though, and is
inconsistent.
This will make the auto-generated Kconfig documentation have "No
defaults. Implicitly defaults to n." as well, which is clearer than
'default n if ...'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though, and is
inconsistent.
This will make the auto-generated Kconfig documentation have "No
defaults. Implicitly defaults to n." as well, which is clearer than
'default n if ...'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though, and is
inconsistent.
This will make the auto-generated Kconfig documentation have "No
defaults. Implicitly defaults to n." as well, which is clearer than
'default n if ...'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though, and is
inconsistent.
This will make the auto-generated Kconfig documentation have "No
defaults. Implicitly defaults to n." as well, which is clearer than
'default n if ...'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though, and is
inconsistent.
This will make the auto-generated Kconfig documentation have "No
defaults. Implicitly defaults to n." as well, which is clearer than
'default n if ...'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though, and is
inconsistent.
This will make the auto-generated Kconfig documentation have "No
defaults. Implicitly defaults to n." as well, which is clearer than
'default n if ...'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The previous default, CONFIG_ETH_MCUX_0_RANDOM_MAC, result in a random
MAC address changed each reboot. As reboots happen quite often during
development, while Ethernet peers usually cache existing MAC addresses
in ARP cache, this led to situation when a board after reboot didn't
respond to pings or any other connection attempts for random amount of
time (upo to 10-20s). This was quite confusing and looked like some
problem in driver/hardware/connection/whatever.
Instead, introduce new option, CONFIG_ETH_MCUX_0_UNIQUE_MAC, to make
MAC address from MCU unique identification register. This results in
randomized/unique MAC address which is also stable over reboots and
avoids the situation described above.
Fixes: #3187
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Define the pinmuxing for I2Sx_CK, I2Sx_SD and I2Sx_WS wires (with
'x' in the range 1 to 5). The multiplexing has been selected in
accordance to the ArgonKey board requirements.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Add support for NXP PCA9633 an I2C 4-bit LED driver.
Supported blinkink period: 41ms to 10667ms
Supported brightness value: 0 to 100%
This driver supports the following APIs:
1. led_blink
2. led_set_brightness
3. led_on
4. led_off
Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
1. API function: uart_nrfx_irq_tx_enable is expected to enable and
trigger TXDRDY interrupt. Due to HW limiation before first byte has
been sent TXDRDY interrupt will not be triggered so it must be forced
by the software.
2. Common function: uart_nrfx_irq_tx_ready_complete is used for two
API entries: irq_tx_ready, irq_tx_complete because Nordic hardware does
not distinguish between them. This function returns 1 when driver is
ready to accept data and 0 otherwise.
3. Removed Hungarian prefixes.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Uncovered by clang we have some functions being only used conditionally,
so gaurd them to make them only available when those conditions are met.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Configure BlueNRG in controller w/o host.
By disabling 'HCI_reset' via the quirk, we can request to
BluesNRG hardware to be on controller mode just after it is ready.
By the way it's no necessary to manage a 'HCI_reset' when BluesNRG are
initialised (and on controler mode).
Signed-off-by: Christophe Priouzeau <christophe.priouzeau@st.com>
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
MSI clock signal can be selected in several ranges.
These ranges should be taken into account for calculating its
frequency and hence global system frequency.
Provide a Kconfig option to set MSI range.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Signed-off-by: Christophe Priouzeau <christophe.priouzeau@st.com>
According to BlueNRG-MS ref manual, SPI master shoul read from
controller as long as IRQ pin is high.
Introduce a new loop within spi_rx_thread to do so. Since
it is now possible to enter read loop with nothing to read, set
a max attempts limit to be sure to exit the loop.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Signed-off-by: Christophe Priouzeau <christophe.priouzeau@st.com>
In order to avoid bytes dropping when RTT output buffer is full,
RTT session detection algorithm is introduced to the RTT console.
If host session is detected console retries after wait state
expecting host to empty the buffer. If host session is not detected
console drops the byte without retrying.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
The patch adds serial driver support for STM32F7 family
microcontrollers, includes pinmux definitions and DTS fixup file.
Signed-off-by: Yurii Hamann <yurii@hamann.site>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This is needed to avoid compilation warnings when using both the
built-in libc and newlib.
The warnings were caused by typedefs incompatibilities.
This was agreed to be the temporary solution at the TSC.
See #8469 for more details.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
The subsys/net/ directory is more logical place for L2 code instead
of ip/ directory. No functionality changes by this commit.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Defines a PTP clock driver that can be implemented in those network
interface drivers that provide gPTP support.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Julien Chevrier <julien.chevrier@intel.com>
Commit: 8a255eaf39d3e1a170297fc59c4674c080f99db8
broke flow control initialization.
This PR adds missing:
- GPIO initialization for RTS and CTS.
- RTS and CTS pins assignment for flow control.
- Function for setting default hight state for TXD and RTS pins.
In addition obsolete cast to void has been removed.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
For the native_posix board, implement the new get_entropy_isr call.
The old native get_entropy was already safe for ISRs, so we just
add a wrapper to it.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Adds support for configuring the CS toggling delay and using a
different device ID so that compatible flash chips can also be
used by this driver.
Signed-off-by: Jamie McCrae <jamie.mccrae@lairdtech.com>
Adds a translation layer to make the nrfx driver for nrf52 PWM
peripheral accessible via the Zephyr's API.
Signed-off-by: Justin DeMartino <jdemarti@gmail.com>
The following dependency loop existed:
config SPI_SLAVE
bool
(Defined at drivers/spi/Kconfig:27)
...is selected by...
config SPI_2_NRF_SPIS
bool
select SPI_SLAVE
(Defined at drivers/spi/Kconfig.nrfx:210)
...is in the choice...
choice
bool
depends on SPI_2
(Defined at drivers/spi/Kconfig.nrfx:192)
...that depends on...
config SPI_2
bool
depends on SPI_SLAVE
(Defined at
arch/x86/soc/intel_quark/quark_se/Kconfig.defconfig.series)
...that again depends on SPI_SLAVE
(This might not be a problem in practice, but it'd be difficult to
detect.)
I think the underlying issue is that SPI_2_NRF_SPIS 'select's SPI_SLAVE,
while SPI_2 'depends on' it.
Fix it by having SPI_2_NRF_SPIS 'depend on' SPI_SLAVE as well. This will
require SPI_SLAVE to be explicitly enabled before SPI_2_NRF_SPIS can be
enabled.
No configuration files in Zephyr itself seem to currently enable
SPI_2_NRF_SPIS (and it defaults to n), so no tweaks should be needed
there.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
_impl_rtc_(enable|disable) does not return a value while
Z_SYSCALL_HANDLER(rtc_(enable|disable)) expects to return a value.
Signed-off-by: Olivier Martin <olivier.martin@proglove.de>
This commit adds support for Microsemi Mi-V RISC-V softcore CPU
running on the M2GL025 IGLOO2 FPGA development board.
signed-off-by: Karol Gugala <kgugala@antmicro.com>
This commit moves code from fe310 platform into RISC-V privilege common
folder. This way the code can be reused by other platforms in future.
signed-off-by: Karol Gugala <kgugala@antmicro.com>
RISC-V qemu does not use PLIC controller, so plic.c file fails to
compile with qemu target. This change disables plic if qemu is
chosen.
signed-off-by: Karol Gugala <kgugala@antmicro.com>
SDA and SCL pins can now be configured through DTS.
Pins on development kits have been assigned according to arduino
headers.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
Changes add a translation layer to make nrfx TWI and TWIM drivers
work with Zephyr API.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
As part of HAL_CAN_Init we check the initial state of the can handle.
Setting it to HAL_CAN_STATE_RESET as an initial state to start the
Init properly.
Resolves: #8416
Coverity-CID: 186580
Signed-off-by: Sritej Kanakadandi Venkata Rama <sritej.kvr@gmail.com>
Added CONFIG_USB_DW_USB_2_0
Updated global configuration register to use UTMI 16 bit PHY
Updated device configuration register to use High Speed
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
As not all controllers using DW usb doesn't inherit
the qmsi related header, use of QM_USB_MAX_PACKET_SIZE,
QM_USB_IN_EP_NUM and QM_USB_OUT_EP_NUM break the build
for such platform. Hence defined new macros and corresponding
change done in driver.
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
Condition:
depends on ((SOC_SERIES_NRF52X || SOC_SERIES_NRF51X) && (!SOC_NRF52810))
for displaing configuration for UART0 peripheral has been replaced with:
depends on HAS_HW_NRF_UART0.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Attempts to clear/invalidate caches which are disabled lead to BUS
FAULTS.
Ensure they are enabled before using them.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
What needs to be done for the cache to work properly:
* Make sure cache operations are aligned to 32B
* Make sure to clean and invalidate the operations on gmac descriptors
(thus all the helper functions)
This commit is needed for SAM GMAC to work when caches are enabled and
MPU mapping is changed to cacheable (See #8185)
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
The various STM32 reference manuals sometimes define the USB endpoints
as IN or OUT only and sometimes as bidirectional, even in the same
manual. This is likely because the OTG implementation has one set of
registers for the IN endpoints and one other set for OUT endpoints.
However at the end a given endpoint address can both transmit and
receive data.
This causes some confusion how to declare the endpoints in the device
tree, and depending on the SoC, they are either the same number of IN
and OUT endpoints declared, or they are declared as bidirectional. At
the end it doesn't really matter given how the driver uses those values:
#define NUM_IN_EP (CONFIG_USB_NUM_BIDIR_ENDPOINTS + \
CONFIG_USB_NUM_IN_ENDPOINTS)
#define NUM_OUT_EP (CONFIG_USB_NUM_BIDIR_ENDPOINTS + \
CONFIG_USB_NUM_OUT_ENDPOINTS)
#define NUM_BIDIR_EP NUM_OUT_EP
This patch therefore cleanup the driver, the DTS, and the DTS fixups to
only define the number of bidirectional endpoints.
In addition to the cleanup, that fixes a regression introduced by commit
52eacf16a2 ("driver: usb: add check for endpoint capabilities"), which
introduced a wrong check for SoC only defining the number of
bidirectional endpoints.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This commit enables CAN on the STM32L432.
Tested on nucleo l432ck with external transceiver and loopback mode.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
This commit splits the common interrupt into rx and tx parts because
only STM32F0 series has a common interrupt.
Moved clock source definition to device-tree.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
In order to ease integration of new series, remove reference to
series in code activation. Use LPUART support Kconfig symbol instead.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Remove reference to SoC series in activation of TEACK/REACK flags
checks. Use flags definitions instead which is defined, if supported,
in STM32Cube packages.
Decouple the checks since REACK is not supported in some series.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The nrfx uart driver will get stuck in uart_poll_out function since
the uart_console driver has been initialized at PRE_KERNEL_1 level
and is making calls to the uart driver before the uart driver has been
initialized.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
When using CONFIG_MULTITHREADING=n, the semaphore primitives are
non-functional and useless. Remove their usage when this option is
enabled.
Signed-off-by: Johannes Hutter <johannes@proglove.de>
This symbol will be added by
https://github.com/zephyrproject-rtos/zephyr/pull/7915.
Having it in there doesn't hurt that much by itself (undefined symbols
default to 'n'), but I'm about to turn references to undefined Kconfig
symbols turn into an error.
Remove the reference.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
To enable for easier testing, replace direct use of registers
from Nordic's nrfx MDK with accesses via its HAL inlined functions
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
To enable for easier testing, replace direct use of registers
from Nordic's nrfx MDK with accesses via its HAL inlined functions
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
To enable for easier testing, replace direct use of registers
from Nordic's nrfx MDK with accesses via its HAL inlined functions
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
When using CONFIG_MULTITHREADING=n, the semaphore primitives are
non-functional and useless. Remove their usage when this option is
enabled.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Initiate a SimpleLink WiFi Driver, implemented to the WiFi management
offload APIs for scan, connect, disconnect.
Also registers the DHCP-obtained IPv4 address upon connect.
This was validated on a cc3220sf_launchxl using the wifi
shell module from the Zephyr shell_module sample.
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Add function to check capabilities of an endpoint.
Only basic properties are checked, especially on STM32
capabilities of different USB controller configurations
have to be considered in the future.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
CONFIG_SPI_FLASH_W25QXXDV_MAX_DATA_LEN is a left-over from old SPI API
usage. Now, there is no limit (besides the flash size) in SPI data
transaction.
Fixes#8327
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This adds basic support for declaring gpio nodes in dts for nrf52.
The dts.fixup provides mapping for the generated defines to the config
defines currently used by the nrf gpio driver.
Existing boards that use nrf52 are updated.
Signed-off-by: Marc Reilly <marc@cpdesign.com.au>
This makes it easier to distinguish them from "true" undefined symbols.
Internally, all int/hex literals are treated as undefined symbols, which
always get their name as their value. The C tools work the same way.
The plan is to turn references to undefined Kconfig symbols into an
error later.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
These cases weren't caught by the heuristic used by the warning added in
commit 6eabea3a7e ("Kconfiglib: Warn for unquoted string defaults"),
because "GPIO_0" has no lowercase characters in it.
Unquoted Kconfig values are are indistinguishable from reference to
(undefined) symbols in general. Quoting all string defaults will help
find "true" references to undefined Kconfig symbols, and makes it
clearer that the value is constant.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
These symbols were removed by commit 4e8f29f319 ("gpio: Refactor the
mcux gpio driver to use dts"). The settings should come from DTS now.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Add support for specifying the clock prescaler value for the HF timer
used for generating the PWM signals. This allows for lower timer
frequency and thus slower PWM signals (e.g. for use as servo
controller).
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
The nRF5x HF timer base frequency is 16 MHz, not 16777216 Hz.
The improved accurracy of the PWM signal was verified with an
oscilloscope on a BBC micro:bit.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
stm32cube SDK provides defines for IRQ line numbers.
It was not possible to use them, since enum where not supported
by IRQ_CONNECT macro.
Use them in order to get rid of zephyr manually coded IRQ lines.
They will later be replaced by device tree definitions when
made available
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
stm32cube SDK provides defines for IRQ line numbers.
It was not possible to use them, since enum where not supported
by IRQ_CONNECT macro.
Use them in order to get rid of zephyr manually coded IRQ lines.
They will later be replaced by device tree definitions when
made available
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
UART driver renamed to keep the same convention as SPI and TWI drivers.
All substrings: "UART_NRF5" in defines renamed to "UART_NRFX_UART".
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Replace all register defines and calls with Nordic nrfx HAL.
Simplification of uart shim - assumed only one uart instance.
Added parity bit to configuration options.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Add fixup info for PWM nodes on STM32F0/F1/F3/F4/L4 and remove the
conflicting Kconfig symbols to fully switch STM32 PWM to device tree.
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
The nucleo_f334r8 uses STM32F3_PINMUX_FUNC_PA8_PWM1_CH1 inside its
pinmux but it is not defined anywhere.
Add the definition into the pinmux file to fix the build of
nucleo_f334r8 when enabling CONFIG_PWM.
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
CONFIG_CLOCK_STM32_APB2_PRESCALER does not exist for STM32F0 as it was
removed from the RCC Kconfig by commit d0678201c3 ("drivers:
clock_control: provide support for stm32f0."). This will break the PWM
driver if compiled for STM32F0.
Conditionally disable usage of this symbol for STM32F0 as all PWMs are
on APB1 for this family.
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
PWM1 / PWM15 / PWM16 and PWM17 on STM32F0 do not use the same clocks
compared to the other series.
Add the STM32F0-specific clocks where needed.
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
Not all PWM clocks belong to the GRP1, for example TIM1 on STM32F0. Add
the group information to the macro to enable supporting these PWMs in
the future.
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
The prescalers are currently hardcoded and are not user-selectable. As a
result, the frequency of the timer can be inadequate to the task. For
instance, the frequency of the 16-bit timers (prescaler 10000) is
usually too low to correctly generate of PWM of a few kilohertz.
Hardcoded prescalers are replaced by Kconfigs so the user can choose at
compile time. The default value of each Kconfig matches the hardcoded
prescaler, so the change will be transparent.
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
All the PWM between 1 and 20 can be found on the STM32 depending on the
serie and the specific model. Add all the missing PWMs up to PWM20 to
plan for the future needs.
Tested on STM32L496 with available PWMs.
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
The registration of each PWM differs only by a few details.
These differences can be factorized in order to create a generic
registration macro.
This has several advantages:
- Less code
- Easier to add new PWM
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
The nrf_rtc_timer used own method to calculate number of timer cycles
per tick. As the result value was different than the one used by
the kernel, the reported time was incorrect.
This commit fixes the problem described above by using global
sys_clock_hw_cycles_per_tick instead of custom RTC_TICKS_PER_SYS_TICK.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Added support for circular linked list of DMA buffers
This patch checks the last block supplied by the application
and if the next pointer in the last block is valid, the tail
linked list item is linked to the head linked list item
to form a circular linked list
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
SPI driver has its own rx thread, select BT_RECV_IS_RX_THREAD.
This fixes build issue because of undefined CONFIG_BT_RX_PRIO.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
IRQ priorities for CAVS and DW were previously defined in Kconfig.
They are now defined via DTS and removed from Kconfig.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
If carrier is ON or OFF, then tell this information to upper IP stack
so that it can act accordingly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As stated in LIS2DH datasheet in section "5.1.1 I2C Operation",
in order to read/write multiple bytes on I2C it is necessary
to add the autoincrement bit to the subaddress field.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
The lis2dh_burst_write used "bus" as an input parameters, while
inside "dev" was referred. Now variable names are aligned.
Signed-off-by: Evgeny Kalugin <evgeny.kalugin@intel.com>
Introduce a custom HCI driver for the native POSIX port, which opens a
HCI User Channel socket to the Linux kernel to gain access to a local
Bluetooth controller.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The OVR condition in the Status Register requires a
particular sequence in order to be cleared. If not
done properly it stays set forever.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
The issue was introduced by commit-id 27bdb83.
RTC_DIVIDER used to be 0 by default, now it's 1.
Fixes#8098
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The old way of erasing was not completely moved to the new SPI access
function, thus always sending useless dummy bytes that could lead to
error (aka: erasing more than requested).
Fixes#8065
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Each driver seemed to use their own Kconfig option to set the name for
their drivers. This makes writing example/test code difficult as each
one of them will have to special case for each of the supported
platforms.
Use a consistent CONFIG_WDT_0_NAME option in all drivers.
Fixes#8094.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Instead of relying on CONFIG_WDT_ESP32_DISABLE_AT_BOOT, use
CONFIG_WDT_DISABLE_AT_BOOT that's available for all watchdog timers.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
This commit moves the bit timing (PROP, BS1, BS2 segments and SWJ)
from Kconfig to the device-tree and fixes issue #7933
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Add bit definitions and set M/N divider ownership in
i2s_initialize.
Changes to comply with coding guidelines
Changes to address review comments
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
Added support for fractional division of reference clock to obtain
I2S bit clocks
For example:
If reference clock is 38.4MHz and
if the I2S format is 2ch, 32bits per channel, 48KHz sample rate,
the bit clock frequency has to be 2*32*48K = 3.072MHz
38.4MHz/3.072MHz = 12.5 (a fraction)
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
STM32 GPIO device initialization priority was set to
CONFIG_KERNEL_INIT_PRIORITY_DEFAULT
Following introduction of __ZEPHYR_SUPERVISOR__ macro (#6835),
drivers intialization order have been reordered which blocks
some use cases now.
Increase GPIO init priority to get it initialized before SPI
and avoid a deadlock.
Fixes#7663
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Don't hard code the syslog level to DEBUG, instead use the
CONFIG_SYS_LOG_ETHERNET_LEVEL setting like other ethernet drivers.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Allow the application using DMA driver to register a callback for
a specific channel within the DMA device instead of one callback
per device.
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
Native POSIX echo server sends malformed response to echo request of
size larger than 128 bytes (default size of each network data
fragment). Wireshark notices that by tagging echo request with "No
response seen". This commit fixes that issue.
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
usb_dc_ep_read_continue can be called without usb_dc_ep_read_wait,
check if the current buffer is claimed by the controller
(transfer not finished) to prevent a faulty behavior.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Some serial tools such as 'minicom' send BS when press backspace,
not DEL, so delete char using BS or DEL.
Fixes: #7959
Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
This is a rare but valid case when you request the controller to send
dummy bytes on your behalf (it saves memory as you don't need to provide
a valid buffer, just NULL and the numbers of dummy bytes as length).
Without it, user code can get stuck into interrupt loop.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The choice symbol LSM6DSL_EXT0_LIS2MDL was given a 'default' in
Kboards/arm/96b_argonkey/Kconfig.defconfig, but 'default' has no effect
on choice symbols, triggering a warning from Kconfiglib.
Instead of adding a default to the choice symbol, change the default of
the 'choice' itself by giving it name and adding the default in
Kconfig.defconfig.
This requires that we remove the default on the "base" definition of the
'choice', due to some messiness related to the Zephyr-specific
prefer-later-defaults behavior (see the 'Zephyr-specific Kconfig
behavior for defaults' section in the Board Porting Guide). Choices were
overlooked when that patch was added to the C tools, meaning choices
still prefer earlier defaults. The crux is that Kconfig.defconfig files
are included last.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
CAVS_ICTL_0_IRQ_PRI to CAVS_ICTL_3_IRQ_PRI and DW_ICTL_IRQ_PRI
are now defined in Kconfig. This addresses the issue #7811.
This was not throwing up any compilation error earlier as the IRQ
priorities are all hardwired in Xtensa and hence are unconfigurable.
They are dummy for Xtensa arch but may be applicable if used in some
other arch.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
Convert couple of MSEC() calls to K_MSEC() as the timeouts
when using MSEC() are just too long.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In the current form of the code, the slave frame shifting leaves the TX
full and will shift out some unwanted bytes out on the next transaction.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
This patch corrects the way the INTENSET and INTENCLR registers are
accessed. When these registers are written with a bitmask, specified
bits are set or cleared in the INTEN (interrupt enabling) register,
so there is no need to read the previous state of these registers
(when they are read, the current state of INTEN is returned).
For INTENSET this patch eliminates only one unnecessary read, but for
INTENCLR the change is crucial because in the previous version any
write to the register disabled all the enabled interrupts.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
In case ethernet cable is unplugged, stm32 ethernet driver triggers
an error, driver initialization fails and fw crashes.
This could be enhanced as in case not cable is connected, HAL
returns a Time out, and will resume its initialization when
cable is plugged.
Treat HAL timeout in ethernet driver initialization as a
recoverable error and continues driver init when it happens.
Tested with sample/net/dhcpv4_client. Start board with cable
unplugged. Wait some time before plugging the cable. DHCP request
is correctly performed when cable is plugged.
Fixes: #7127
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
In SPI slave case the transceive should return either the negative
errno code in case of error or the number of frames received.
So, now:
1. the spi_stm32_get_err() routine already checks whether
the SPI cell got an error and returns -EIO in that case.
2. the transceive() routine always returns whatever the
spi_context_wait_for_completion() has returned, which
is either:
a. -EIO in case of error
b. 0 in spi_master ok case
c. the number of frames received in spi_slave ok case
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Enable supporting UART4 on STM32F107 and STM32F103Xe SoCs.
Modified stm32f1/dts.fixup for replacing USART with UART.
Signed-off-by: Jun Li <jun.r.li@intel.com>
LPUART (Low-power UART) peripheral is just like ordinary U(S)ART
which lives in a separate clock/power domain.
Therefore already existing code could be reused as is
almost entirely.
Signed-off-by: Ilya Tagunov <tagunil@gmail.com>
LBD interrupt manupulation makes sense for UART with LIN support only.
Otherwise this bit should not be touched.
Signed-off-by: Ilya Tagunov <tagunil@gmail.com>
STM32Lx LPUART peripherals do not fit well into existing U(S)ART
port numbering scheme, so there will be two separate namespaces
in Kconfig: one for U(S)ARTs and one for LPUARTs.
Signed-off-by: Ilya Tagunov <tagunil@gmail.com>
The driver was using CONFIG_I2S_1_IRQ_PRI which doesn't exist. It
should use CONFIG_I2S_CAVS_1_IRQ_PRI.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The trailing #endif comments used CONFIG_FE310_UART_{0,1} and they
should be CONFIG_UART_FE310_PORT_{0,1}.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Implement the new entropy_get_entropy_isr() function to allow the kernel
to collect entropy before the scheduler and kernel data structures are
ready. Switch to an nrf-specific version for high-performance
requirements in the BLE Link Layer.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
CONFIG_UART_NSIM depends on CONFIG_NSIM, which was removed in commit
9bc69a46fa ("boards: Update arc em_starterkit support from 2.2 to
2.3"). Remove the dependency, and also remove the CONFIG_NSIM=y setting
from the test_nsim test (which should now work).
Also change the condition for EXTERN()ing _VectorTable in
include/arch/arc/v2/linker.ld to check CONFIG_UART_NSIM instead of
CONFIG_NSIM. I'm guessing the EXTERN() is there to make the symbol
visible to nSIM, though I don't know anything about it.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The STM32L4x2 SoCs need to control the isolation of the USB features
from VDDUSB. This is done through the PWR_CR2 bit USV, however the
current code checks for the PWR_CR2_PVME1 bit instead, which is only
available on Cat. 3 devices. This bug is also present int the HAL and
likely copied from there.
Replace the check by PWR_CR2_USV instead.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
When the RTC support get added we had a select on HAS_RTC, however this
Kconfig symbol didn't exist. Clean this up to match the pattern of
HAS_MCUX_RTC. The driver now depends on that and the SoC selects it.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
In stm32 clock_control driver, Kconfig symbol CLOCK_STM32_PLL_PREDIV1
in stm32f3 series was set as conditional on the activation of some
specific STM32F3 SoCs that are not supported yet in Zephyr.
Remove this flag.
In order not to loose a rather studious part of code, comment it out
and set a TODO to specify how to re-enable it once it will be
required.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
There is no pinmux_dw.c and not Kconfig symbols associated with
CONFIG_PINMUX_DW, so remove the references to them.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Rename CONFIG_PMS7003_SERIAL_TIMEOUT to CFG_PMS7003_SERIAL_TIMEOUT as it
was not exposed in Kconfig as a configurable option. So don't use the
CONFIG_ prefix for non-Kconfig symbols.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
In the code we had an if defined based on
CONFIG_BMM150_MAGN_SAMPLING_RATE_RUNTIME that should have been
CONFIG_BMM150_SAMPLING_RATE_RUNTIME.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
In the code we had an if defined based on
CONFIG_ATAES132A_I2C_SPEED_STANDARD that should be
CONFIG_CRYPTO_ATAES132A_I2C_SPEED_STANDARD.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We had a typo in the Kconfig symbol that was being used to try and set
SYS_LOG_LEVEL. It should be CONFIG_SYS_LOG_NET_LOOPBACK_LEVEL.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
To ensure that early code that requires entropy has the HWRNG devices
fully initialized, initialize them all during PRE_KERNEL_1 stage.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
patch add clock frequency and interrupt property to uart
node in intel_s1000.dtsi. Include soc.h after types.h to
prevent build error.
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
This commit adds low level driver support for STM32 micro controllers.
It is tested on stm32f072b in loopback and normal mode.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Leading/trailing whitespace in prompts requires ugly workarounds in
genrest.py, as e.g. *prompt * is invalid RST. strip() all prompts in
Kconfiglib and get rid of the genrest.py workarounds. Add a warning too.
The Kconfiglib update has some unrelated cleanups and fixes (that won't
affect Zephyr).
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Use the named choices feature introduced by PR #6966
and configure LSM6DSL on ArgonKey board.
The two named choices introduced in LSM6DSL are:
- LSM6DSL_BUS_TYPE (default LSM6DSL_I2C)
- LSM6DSL_TRIGGER_MODE (default LSM6DSL_TRIGGER_NONE)
Signed-off-by: Armando Visconti <armando.visconti@st.com>
This patch adds dts support to lps22hb/hts221/vl53l0x
I2C sensors as well as lsm6dsl SPI sensor.
Since some info, like gpio for irq triggering or SPI bus
characteristics, may be provided through dts, they need
to be made optional in the LSM6DSL driver by usage of
macros like HAS_DTS_SPI_PINS or HAS_DTS_SPI_DEVICE.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Minimal driver for ILI9340 LCD display driver including support
for adafruit 2.2" LCD display (1480)
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
Looks lik ARC arch snps_esmk can provide a 3rd port of this controller,
so let's add the necessary bits and pieces to get it instanciated if one
enable this port in DTS.
PCI settings are not introduced for that port as there is no known
arch/board exposing a 3rd port on PCI bus.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Fix the qmsi i2c driver and the relevant SoCs accordingly.
Also applying relevant changes on quark_se_c1000_ss as it can use i2c
qmsi driver as well along with qmsi ss i2c driver.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that all arch using QMSI gpio driver are generating the right
settings through DTS, these options can be removed from Kconfig.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Fix the ns16550 uart driver and relevant SoCs accordingly.
All generic settings are now DTS based.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Fix the qmsi uart driver and relevant SoCs accordingly.
Also: using config for irq everwhere relevantly and not an hardcoded
value in the driver.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Get the name generated through dts as well.
Fix the rtc driver and relevant SoCs accordingly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Get the name and irq flags generated through dts as well.
Fix Kconfig for the gpio driver accordingly.
Irq priority is not set by dts for D2000 as it's irq controller does
not support it.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
In order to check whether an interrupt is pending for the driver user,
the driver itself needs to verify what interrupt paths are enabled (RX
and or TX) so that as not to return true misleadingly.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The toplevel adc_seq_table is now copied onto the stack and
the stack copy used.
The contained entries array is now copied onto an allocation
drawn from the caller's resource pool, to prevent modification
of the buffer pointers.
The return value policy here is to oops the caller if bad memory
or objects are passed in, but return an error otherwise.
Based on an original patch by Leandro Pereira, rebased and the
copy of the entries array added.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The various macros to do checks in system call handlers all
implictly would generate a kernel oops if a check failed.
This is undesirable for a few reasons:
* System call handlers that acquire resources in the handler
have no good recourse for cleanup if a check fails.
* In some cases we may want to propagate a return value back
to the caller instead of just killing the calling thread,
even though the base API doesn't do these checks.
These macros now all return a value, if nonzero is returned
the check failed. K_OOPS() now wraps these calls to generate
a kernel oops.
At the moment, the policy for all APIs has not changed. They
still all oops upon a failed check/
The macros now use the Z_ notation for private APIs.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add driver for MCUX mailbox which can be used for lpcxpresso54114
and other lpc and kinetis socs.
Origin: Original
Signed-off-by: Stanislav Poboril <stanislav.poboril@nxp.com>
The mcux sim clock control driver was originally designed to pass
through the clock subsystem value from dts to the mcux CLOCK_GetFreq()
function. This assumed that the values in
include/dt-bindings/clock/kinetis_sim.h matched the enumeration in
fsl_clock.h, which is true for the coresys, platform, and bus clocks.
However, the low-power oscillator (LPO) clock has a different values in
k64 vs. kw2xd, therefore we must update the clock_control driver to
parse the value from dts and convert it to the fsl_clock.h enumeration.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This patch adds the configuration, driver, and HAL changes required
to implement a MCUX based RTC driver for the NXP Kinetis KW41Z.
Signed-off-by: Andy Gross <agross@kernel.org>
This patch adds a prescaler configuration option that denotes the
number of RTC ticks per second. This is used to calculate the value
for 1 second.
Signed-off-by: Andy Gross <agross@kernel.org>
This patch splits off the QMSI RTC into a separate Kconfig
file in preparation for adding more RTC drivers.
Signed-off-by: Andy Gross <agross@kernel.org>
The Kconfig IWDG_STM32_START_AT_BOOT is actually not used and the
watchdog is enabled unconditionnally at init.
Enable the watchdog only if CONFIG_IWDG_STM32_START_AT_BOOT is set.
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
Add the necessary Kconfigs and supporting code to enable I2C4 which can
be found on certain STM32L4.
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
TimerHandle->Init.Period is used to initialize TIMx ARR register. The
timer will count from 0 up to ARR including, thus it will tick
(ARR + 1) timers per period. As the "period_cycles" variable holds the
number of desired ticks, the ARR register is computed as
ARR = period_cycles - 1
Update the code to reflect this relationship. Otherwise the timer will
count one more tick for each period, leading to a wrong PWM frequency.
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
ACK frames are handled on hardware level, so let's expose this
capability in order to avoid L2 waiting for these.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
L2 could take advantage of such hardware capability, when supported by
the device. This is also required for OpenThread.
Fixes#5714
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This patch fixes some bugs found during testing with testusb from
linux kernel.
An unresolved issue is that the stack is not fast enough
to stall (if necessary) the control endpoint during Setup Stage.
This might require a API change so that the usb device stack
can explicit allow the driver to resume token processing.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
There will be other drivers, and mixing up all these files together will
create a mess so better having a dedicated place for winc1500, at least.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This cleans up the callback functions and isolate each part to a
relevant handler to improve readability.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This call is already made in nm_bus_wrapper along with SPI.
In nm_bus_wrapper however: moving the call out of #ifdefsf as it is
generic call, whatever bus would be choosen.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There is no point having undocumented and local config options when
Kconfig can be used to expose these relevantly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Previous way was cumbersome (based on an old way for cc2520 actually),
so moving towards the more recent and proper way.
This will enable anybody to actually provide gpio configuration for a
winc1500 out of any board specific location.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Adding support for WINC1500 WiFi chip.
It introduces the wifi drivers sub-directory.
It provides a Full-MAC for 802.11 and an offloaded network stack as
well. The driver uses Atmel's winc1500 HAL.
Signed-off-by: Dario Pennisi <dario@iptronix.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Massimiliano Agneni <massimiliano.agneni@iptronix.com>
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
TI's ADC108S102 is a sampling on 16 bits, and thus requires the
destination buffer to be made of an even number of bytes.
Fixes#7389
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Be more obvious about the entropy_native_posix driver
being only a test utility which does not generate real
entropy.
Fixes: #6388
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
To avoid another thread from modifying the spi_buf_set and spi_config
structures passed to the spi_transceive() syscall, copy those to the
kernel stack before validating.
Fixes#7378.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Fix a somewhat rare race condition when the thread gets
preempted in the middle of sending a byte through UART.
If the other thread also sends another byte through UART
and "consumes" the EVENTS_TXDRDY value, the first thread
will get stuck in the while loop forever.
By moving the reset to the function start, we guarantee that
the baseline state of EVENTS_TXRDY is 1. Therefore, the first
thread will continue normally when it executes again.
Signed-off-by: Thiago Silveira <thiago@exati.com.br>
Remove redundant declaration of youve_print. This probably
had been a review oversight and upstreamed.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Check that stream Id passed to stm32 DMA API is within
possible stream values and return -EINVAL is invalid stream
id is passed.
fixes: #7380
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Name the choice of BT HCI driver bus in order to config it
in the board's Kconfig.defconfig file.
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
When we called DEVICE_AND_API_INIT for PMW3, we accidently had
pwm_stm32_2 instead of pwm_stm32_3.
Fixes: #6625
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Normally a syscall would check the current privilege level and then
decide to go to _impl_<syscall> directly or go through a
_handler_<syscall>.
__ZEPHYR_SUPERVISOR__ is a compiler optimization flag which will
make all the system calls from the driver files directly link
to the _impl_<syscall>. Thereby reducing the overhead of checking the
privileges.
In the previous implementation all the source files would be compiled
by zephyr_source() rule. This means that zephyr_* is a catchall CMake
library for source files that can be built purely with the include
paths, defines, and other compiler flags that all zephyr source
files uses. This states that adding one extra compiler flag for only
one complete directory would fail.
This limitation can be overcome by using zephyr_libray* APIs. This
creates a library for the required directories and it also supports
directory level properties.
Hence we use zephyr_library* to create a new library with
macro _ZEPHYR_SUPERVISOR_ for the optimization.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
* add gpio, i2c, spi definitions
* optimize and bug fix the dts.fixup
* optimize and bug fix the em_starterkit related definitions
in dts folder
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
According to data sheet of dw_spi, ser reg is used to
select spi device/slave.
one bit in ser maps to one spi device/slave, i.e..
cs 0 ---> bit 0
cs 1 ---> bit 1
cs 2 ---> bit 2
the original code has a bug. the config->slave cannot
directly be written into ser. It should be mapped to
the correct bits through 1 << config->slave.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
New API enables setting watchdog timeout in the unit of microseconds.
It is possible to configure watchdog timer behavior in CPU sleep state
as well as when it is halted by the debugger.
It supports watchdogs with multiple reload channels.
Jira: ZEP-2564
Signed-off-by: Michał Kruszewski <michal.kruszewski@nordicsemi.no>
Signed-off-by: Karol Lasończyk <karol.lasonczyk@nordicsemi.no>
Add a check to raise an error if SYSCFG is disabled,
before doing the pin remaping for F0 SoCs on QFN28
and TSSOP20 packages.
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
Enable System Configuration Controller clock in clock_control
instead of gpio controller when we set a gpio as interrupt.
We use System Configuration Controller to manage external
interrupts and enable PIN pair PA11/12, used in USB device,
mapped instead of PA9/10.
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
Enable System Configuration Controller clock in clock_control
instead of gpio controller when we set a gpio as interrupt.
We use System Configuration Controller to manage external
interrupts and internal voltage reference for 48 MHz HSI
used in USB device.
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
In STM32L0 series, HSI48 requires VREFINT and its buffer
with 48 MHz RC to be enabled. This patch enables
VREFINT reference for HSI48 oscillator.
Signed-off-by: Ilya Tagunov <tagunil@gmail.com>
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
USB LL API provides the EP_TYPE_* defines. STM32Cube does not
provide USB LL API for STM32L0 family. Map EP_TYPE_* defines
to PCD_EP_TYPE_* defines.
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
This patch fixes an overrun detected via Coverity. The
lsm6dsl_odr_to_freq_val function takes an index as argument. If the
index is out of bounds, the expected behavior was to return the last
element of an array. The actual behavior was to overrun the array.
Fixes: #7482
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Adds dts bindings for the mcr20a wireless transceiver. The frdm_k64f
board supports the mcr20a via an Arduino shield, therefore the dts node
is added to the board dts. The kw2xd is a SiP and thus the mcr20a dts
node is added to the soc dts.
The networking samples using prj_frdm_k64f_mcr20a.conf have been broken
since the refactoring of the mcux gpio driver to dts in commit
4e8f29f319. The sample is now fixed.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Refactors the mcux dspi shim driver to use the clock control interface
instead of calling CLOCK_GetFreq() directly. With this change, we are
now getting all soc-specific information from device tree and can remove
the direct dependency on soc.h.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Spi configs like irq priority and device name should not exist if the
spi driver supports device tree. Fixes a few configs that were missing
the necessary "depends on !HAS_DTS_SPI".
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Some spi instance configs were wrapped with ifdefs, while others used
depends. Make them consistent by wrapping them all with ifdefs.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds dts bindings for the fxas21002 interrupt pins to all boards that
have this sensor.
The fxas21002 driver is currently only aware of one sensor interrupt
pin, therefore the routing of INT1 or INT2 to the driver is handled in
each board's dts.fixup.
The fxas21002 sample application has been broken since the refactoring
of the mcux gpio driver to dts in commit
4e8f29f319. The sample is now fixed.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds dts bindings for the fxos8700 interrupt pins to all boards that
have this sensor. The frdm_k64f and hexiwear_k64 connect both sensor
interrupt pins to the mcu, but the frdm_kw41z connects only one.
The fxos8700 driver is currently only aware of one sensor interrupt pin,
therefore the routing of INT1 or INT2 to the driver is handled in each
board's dts.fixup.
The fxos8700 sample application has been broken since the refactoring of
the mcux gpio driver to dts in commit
4e8f29f319. The sample is now fixed.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Add a set of Kconfig symbols that allow us to set that the GPIO
driver/SoC support DTS (HAS_DTS_GPIO) and that drivers that need/use
GPIO support DTS as well (HAS_DTS_GPIO_DEVICE).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
In order to generate GPIO definition for control pin of BlueNRG module
define reset-gpio and irq-gpio in st,spbtle-rf yaml binding.
Add HAS_DTS_SPI_PINS kconfig symbol to control use of the '#define'
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add usb disconnect pin support.
Some boards use a GPIO pin to controll a transistor,
which drives the pull-up resistor on USB DP pin.
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
The hts221 requires 2.2 ms at boot time to download
the flash content into the volatile mem and the
calibration values cannot be read before that.
This issue is causing following crash:
***** USAGE FAULT *****
Executing thread ID (thread): 0x20000234
Faulting instruction address: 0x80037de
Division by zero
Fatal fault in essential thread! Spinning...
Signed-off-by: Armando Visconti <armando.visconti@st.com>
The XSHUT pin, used to shutdown the device when it is not
in current use, is optional and some boards (like ArgonKey)
leave it tied to vdd. So, the driver must provide a way to
make this part configurable.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Until now, Zephyr has used a patched Kconfiglib that turns 'source' into
a globbing source (by replacing 'source' with 'gsource' at the token
level). There's two problems with this:
- The patch needs to be maintained separately
- Misspelled filenames are silently ignored, as they look like glob
patterns that don't match anything
Fix it as follows:
1. Replace all 'source' statements that use wildcards with 'gsource'
2. Remove the custom Kconfiglib patch so that 'source' no longer globs
The sed pattern '/source.*[*?]/s/source/gsource/' was run over all
Kconfig* files to do the replacement.
source's that use environment variables that might contain glob patterns
were manually changed to gsource.
Building the docs in doc/ is a good test, as doc/Makefile deliberately
sets the environment variables to glob up as many Kconfig files as
possible.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
num_entries can be as large as 255. However, based on the
_ti_adc108s102 implementation, num_entries must be less than
ADC108S102_CMD_BUFFER_SIZE or the cmd_buffer[] and
sampling_buffer[] arrays in the data struct could overflow.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Channel IDs start at 0, need to fail if the provided ID
equals ADC108S102_CHANNELS, not just larger than it.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The line control value could result in a baud divisor of zero.
Check this condition and return -EINVAL if that is the case.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The pinmux subsystem does not have any API documenation. Currently
none of the existing pinmux drivers do any kind of input validation
for the pin/op parameters, which has been shown to allow the caller
to access unauthorized memory, up to and including disabling the
MPU.
This requires a proper specification for the pinmux subsystem and
also modification of existingd drivers to validate arguments on a per
driver basis. Remove user mode access until #7390 is resolved.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add system call handler support to LED subsystem. No buffers are
involved in any of the API's and hence the syscall support is
straightforward.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Add dma driver for Nios-II Modular Scatter-Gather DMA soft IP.
This driver relies upon the Altera HAL msgdma driver for all
the dma core register programming and interrupt handling.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Adds a shim layer around the imx gpio driver to adapt it to the Zephyr
gpio interface.
For now only the port 4 was tested.
Signed-off-by: Stanislav Poboril <stanislav.poboril@nxp.com>
The mcux dspi driver was incorrectly using the macro SPI_MODE_GET() to
parse the operation for SPI_TRANSFER_LSB. The effect of this bug was
that the driver would quietly always operate in SPI_TRANSFER_MSB mode.
Coverity-CID: 185401
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Fix issue with Coverity using if / else instead of switch, though it
does not affect code.
Fixes: #7257
CID: 185399
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Implements the driver for Intel CAVS I2S. Only Playback
is currently supported.
Change-Id: I7b816f9736dc35e79a81d3664d6405dc0aac15b4
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Introduce the Intel CAVS DMA. This is based out of the DesignWare
DMA IP but the register offset and bits have been changed in some
cases. However, the fundamental definition for the register field
has not been changed. Hence the registers begin with "DW_" to
indicate the Designware origin.
This driver currently supports the single block mode and linked list
multi-block mode. Scatter-Gather is not supported.
Change-Id: I33a8ed5141d9236167de50e14d3d407e95d6f553
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
intel_s1000 has multiple levels of interrupts consisting of core, CAVS
Logic and designware interrupt controller. This patchset modifies
the regular gen_isr mechanism to support these multiple levels.
Change-Id: I0450666d4e601dfbc8cadc9c9d8100afb61a214c
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This interrupt controller is a designware IP that combines several
sources of interrupt into one line that is then routed to the parent
controller.
This implementation supports only the regular irqs with no support
for priority filtering and vectored interrupts. Firqs are also not
supported.
Change-Id: I8bdf6f8df4632b6d7e8a3ba9a77116771d034a48
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
CAVS interrupt logic is an intel IP that combines several sources of
interrupt into one line that is then routed to the parent controller.
CAVS stands for "connected Audio, Voice and Speech". This IP supports
4 lines which can have a max of 32 interrupts each.
Change-Id: Ia6be51428bedf1011d148ae1fc5d4c34252c05da
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In order to be able to change at runtime the Output Data
Rate (ODR) as well as the Full-Scale (FS) for both the
Accelerometr and Gyroscope the driver needs to provide
the .attr_set callback.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
In .h there are few typos that are fixed in this commit:
- Delete LSM6DSL_REG_CTRL3_C and LSM6DSL_REG_CTRL9_XL
register sections duplication.
- Fix LSM6DSL_REG_CTRL6_C address.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Adding sensorhub support. Only one slave device can be selected
among LIS2MDL (magnetometer) and LPS22HB (pressure and temperature).
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Add support for LED APIs for controlling the LED devices. This
API can be used by the LED devices present on the chip and connected
externally via buses like I2C, SPI etc...
Following APIs are currently supported:
1. led_blink
2. led_set_brightness
3. led_on
4. led_off
Driver support using these APIs will be added in subsequent patches.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Driver APIs might not implement all operations, making it possible for
a user thread to get the kernel to execute a function at 0x00000000.
Perform runtime checks in all the driver handlers, checking if they're
capable of performing the requested operation.
Fixes#6907.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
All the mesages are checked with _SYSCALL_MEMORY() prior to calling the
actual implementation function. However, a race condition might happen
between the check and the call to _impl_i2c_transfer() itself.
Copy the msgs vector to a locally allocated array and pass it to the
transfer implementation.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Add MSI as potential SYSCLK direct source for L0 and L4.
It could be needed in some cases when an accurate clock
is required and no external clock is available.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
We have been combining imported mcux drivers into a flattened directory
structure to maximize driver reuse, but the introduction of additional
nxp soc families (lpc and imx) to zephyr has introduced driver naming
conflicts. This caused us to rename and modify imported files, such as
fsl_gpio.c/h, to make them unique across all three nxp soc families.
This makes updating the the mcux drivers complicated, especially for the
lpc family.
Reoganize the mcux drivers into soc family subfolders, so we can just
copy all the drivers from an mcux distribution (which is done on an
soc-basis) into the appropriate soc family folder. Undo all of the
naming changes that occurred when lpc and imx drivers were originally
imported. Undo the accidental squashing of the kinetis watchdog and dcdc
drivers that occurred when the imx drivers were introduced.
The drawback to this approach is that we have duplicate files when the
same hw ip modules exist in multiple soc families, however there are
only few cases where this occurs, such as fsl_lpuart and fsl_trng.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
include/uart.h says that an interrupt may be an edge or a level.
Re-work the uart_pipe interrupt handler to support both. This makes
uart_pipe work with the USB CDC ACM driver.
Signed-off-by: Michael Hope <mlhx@google.com>
Because of incorrectly set MPS we always got 0 returned for WRITE
transfers and ZLP were always generated for every packet.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This adds a translation layer to make the nrfx driver for the nRF SPIS
(SPI Slave with EasyDMA) peripheral accessible via the Zephyr's API.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Synchronous call return them on success, asynchronous one - with proper
signal - require to get this info through the status.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
- removing a left over from previous SPI slave attempt
- unlock async calls on error
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Introduced with the commit 7a9c4cbd9d,
by copy-pasting from "spi_nrfx_spim.c". Shame on me...
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The sam0 flash driver has support for retrieving flash page layout
information. This commit fixes compilation when
CONFIG_FLASH_PAGE_LAYOUT is disabled.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Similar parts of code are aligned in the two shims, so that they
can be easily compared and updated if required.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This adds a translation layer to make the nrfx driver for the nRF SPIM
(SPI Master with EasyDMA) peripheral accessible via the Zephyr's API.
The shim is provided only for nRF52840 because of a hardware anomaly
present in nRF52832. See Anomaly 58 (SPIM: An additional byte is clocked
out when RXD.MAXCNT = 1) in Errata for this chip.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The simple function that helps to integrate nrfx IRQ handlers with
the IRQ_CONNECT macro can be used in shims for various nrfx drivers,
not only the SPI one.
Similarly, the macro for getting the IRQ number from the peripheral
base address needs to be widely available. It should be even moved
to <nrfx_common.h> in some next nrfx update.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Exposing connect, disconnect and scan for now.
In case the iface is an instance of a WiFi offload device, the way it
manages scanning, connecting and disconnecting will be specific to that
device (not the mgmt interface obviously). In such case the device will
have to export relevantly a dedicated bunch of function to serve the
mgmt interface in a generic way.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This will help not to collide within drivers implementations and/or
avoid dependency from one driver to another one.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
- There is a mismatch when interfacing with external code where a
uint32_t is defined as a parameter and internal Zephyr code attempts
to use u32_t. If NewLib is used, the typedef for u32_t is
'unsigned int' which is not a portable match to uint32_t as
'unsigned int' is not a common size across architectures so gcc will
output a warning.
- The mcux flash code calls NXP supplied functions that expect a
uint32_t.
- openthread.c ot_state_changed_handler has a uint32_t flag as a
parameter.
Signed-off-by: David Leach <david.leach@nxp.com>
- tx_tsv is never used anywhere
- and rx_rsv can be allocated on stack
Optimizing a bit the stack usage in eth_enc28j60_rx() function as well.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
SPI API helps to directly transfer bytes from/to relevant buffers, so
let's take advantage of it.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Driver is still a bit messy, not using for instance the 0-copy
capabilities of SPI API, but this will be fix later.
Constify most of the spi buf structures, removing useless variables,
renaming function with common prefix eth_enc28j60_ etc...
It seems to fix an issue on verifying if tx was successful as well.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Adds a shim layer around the imx uart driver to adapt it to the Zephyr
serial interface.
Modem mode was introduce to control it as DCE and DTE and can be
configured in the device tree:
modem-mode:
type: int
category: required
description: Set the UART Port to modem mode 0 (dce) 1 (dte)
generation: define
For now only the UART 2 was tested.
Signed-off-by: Diego Sueiro <diego.sueiro@gmail.com>
Curently only link speed is exposed.
Opportunity taken to remove any post-fix enumerating the iface init
and/or the api: these must be generic and used by all the instances.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
A Kconfig option is added for setting the initialization priority.
This is done to make the initialization priority requirements in
nrf52_pca20020 board power up sequence clearer.
Signed-off-by: Aapo Vienamo <aapo.vienamo@iki.fi>
This commit exposes the RTC1 ISR handling function, so the
function can be directly used in tests which generate
customized vector tables manually and require a visible symbol
for the ISR function.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Set the received network packet priority according to VLAN priority.
Currently this mapping is 1:1 but can be changed if needed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This enables / fixes VLAN support in mcux ethernet driver.
The commit contains these changes for enabling VLAN:
* Increase the size of the ethernet frame if VLAN is enabled.
* Enable VLAN in chip if VLAN is enabled
* If VLAN is enabled, then the iface in context struct should
not be used directly as there can be multiple VLAN iface
related to this physical device.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Clarify the difference between the buffer length and threshold Kconfig
options available in the nRF5 entropy driver.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Improve the documentation of entropy_nrf5.c by adding a comment that
clarifies it's characteristics.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Logical or is unsufficent for setting up new tmod: it's required to
remove previous one first. Indeed, 0 as tmod is valid (tx-rx mode), but
previous tmod could be 10 or 01, so a logical or will keep the previous
tmod leading to a bogus transaction.
Fixing also a rebase issue visible when debug mode is enabled. Slave
callback is a left over from a test on spi slave.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Commit 29f8b23b broke "make menuconfig" due to a missing newline in
this Kconfig.quark_se file.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
The sensor channel type for the nRF TEMP peripheral is incorrectly set
to SENSOR_CHAN_AMBIENT_TEMP. This peripheral measures die temperature,
not ambient temperature.
Fix the sensor channel.
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
It involves a minor change on which register is configured.
Most of the change is with threshold handling.
Handling the Kconfig based supported mode per-port.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This adds a translation layer to make the nrfx driver for the legacy
(i.e. without EasyDMA) nRF SPI peripheral accessible via the updated
Zephyr's API of the SPI driver.
Configuration files are already prepared for adding support for SPIM
(Master with EasyDMA) and SPIS (Slave with EasyDMA) peripherals.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Now that MCR20A supports the new API, legacy support from mcux dspi
driver can be safely removed.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
And adding support for GPIO CS as well.
It looks like the driver could benefit from centralizing all SPI access
into a unique function, the protocol does not seem too convoluted to do
so, like CC2520 or CC1200.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Adds support for the new spi api to the mcux dspi shim driver. Does not
remove support for the legacy spi api since there are still consumers of
that api, particularly the mcr20a 802.15.4 driver.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
As for RX only, computing the NDF will be used for EEPROM mode.
Only a way to determine EEPROM mode is missing.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Let's use the new SPI API and ditch the old one.
Signed-off-by: Matthias Boesl <matthias.boesl@gmail.com>
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Some device may need to be put up on CS high logic. The active low logic
is the default as usual, but it is now possible to request the active
high logic.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Adding Kconfig options to set supported modes by the controller
(master, slave or both)
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
No need to support legacy API there.
The special usage of CS in BlueNRG is centralized it dedicated functions
to avoid all the #ifdefs everywher.
Also managing transaction error.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Instead of using CONFIG_POLL, which is not directly related to SPI and
is a kernel option, let's have SPI_ASYNC instead. When enabled, it will
select POLL automatically.
Fixes#5839
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
tx_bufs/tx_count and rx_bufs/rx_count can be hold in another dedicated
structure, thus reducing the number of parameters to transceive. This
permits to avoid using the stack when calling transceive.
Since we saved parameters, we can expose back the struct device pointer,
to stay consistent with other device driver APIs.
Fixes#5839
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
As the content of this struct will not be modified by drivers, it's
better to pass it as constant. Also, if someday struct device can be
made contant too, this change will make spi ready for registering the
spi_config into ROM directly.
Fixes#5839
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Split QMSI relevant part into its own file. Some config where using
prompt, some not: normalizing it by removing the prompt keyword where
relevant.
Reducing the file by using if/endif when relevant.
However, it still not fully clean default: cfg and default baudrate
should disappear. There is no default configuration to apply as long
as the controller is not configured to run from any part using spi API.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Some device include a temperature sensor, usually used as a
companion for helping in drift compensation, that measure the
die temperature. This temperature IS NOT related to the the
ambient temperature, hence a clean separation between the two
is required.
This commit introduces a clean separation between the two
types of temperature leaving the old deprecated definition
still there.
The list of current drivers that read the die (and not the ambient)
temperature is the following:
- adxl362
- bma280
- bmg160
- bmi160
- fxos8700
- lis3mdl
- lsm6ds0
- lsm6dsl
- lsm9ds0
- mpu6050
Signed-off-by: Armando Visconti <armando.visconti@st.com>
As the native_posix board has ethernet driver, then enable it by
default if networking is enabled in prj.conf file. This way we can
use generic networking config file when running the application
for native_posix board.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add SPI bus support to LSM6DSL sensor. The bus routines (i.e. I2C
and SPI) are defined in separate files, where proper r/w callbacks
are registered.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
The previous help text rendered as a single paragraph in the Kconfig RST
reference. The new help text renders as a bullet list and matches the
format of SYS_LOG_CRYPTO_LEVEL.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Selecting a choice symbol is always a no-op, and the latest version of
Kconfiglib prints a warning. This commit removes all selects of choice
symbols, which might make the Kconfig files a bit clearer and gets rid
of the warnings.
This is just a dumb removal. I did not try to guess the intent of each
select.
Fixes#6849
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
The sensor enables the readout of multiple consecutive registers if
the MSb of the sub-address is set. The other 7bit are the register
address.
Signed-off-by: Tobias Aschenbrenner <taschenb@posteo.de>
Move IP address settings from net_if to separate structs.
This is needed for VLAN support.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This event is no longer exposed for the USBD peripheral,
and the newest MDK version (and consequently new nrfx HAL)
does not contain its definition and related bitfields.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Remove RTOS-2676 from the comment, this is a jira issue number that was
used with zephyr in the past and not available anywhere for reference.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We can just use polling mode with 0 timeout when waiting data
to arrive from host OS. The 50ms timeout is not needed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use the Zephyr toolchain and architecture defined popcount
and first_lsb_set functions instead of GCC specific
functions.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the permitted range of IRQ priority to, 0 to 2, as
maximum one priority level is used, for zero latency IRQs
in nRF51, being an ARM Cortex-M0.
Update the Kconfig default GPIOTE IRQ priority level to the
lowest, for nRF51 a level of 2; for nRF52, a level of 5.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add support for getting some basic params from the DTS for the UART.
The ns16550 driver still needs to be updated to get IRQ and address
info from DTS.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Create infrastructure that allows ethernet device driver to tell
if it supports network packet checksum offloading. This applies only
to IPv4, UDP or TCP checksums. The driver can enable/disable checksum
offloading separately for Tx and Rx network packets.
If the device (ethernet in this case) can calculate the network
packet checksum for IPv4, UDP or TCP, then do not calculate the
corresponding checksum by the stack itself.
Fixes#2987
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Now that dts i2 qmsi ss nodes generate the right options, let's use
them. Apply the relevant fixup on the targeted SoC.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Applying the change to relevant arch/boards, either in their Kconfig or
the dts specific files.
Taking the opportunity in dw driver to rename the variable the same way
as they are everywhere else in the code (s/dev/dw and s/port/dev) in
init function.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Move driver specific to dedicated file when relevant (i.e.: more than
1-2 options), use if/endif also.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Replace specific STM32F1 references with generic STM32 ones.
Use generic names like U(S)ARTx for instances which have different
naming across STM32 families.
Signed-off-by: Ilya Tagunov <tagunil@gmail.com>
Remove unnecessary header inclusion in nordic's nrf5 random
driver which added a dependency to ext/hal/nordic.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
With upcoming ICs that are not in the nRF5x family, rename the flash
driver and all its dependencies from nrf5 to nrf.
Should also fix the issue introduced by f49150cab6 which broke the
assignment of the flash device due to a partial rename.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
No need to verify that the configuration is proper if we are
compiling the driver for unit test and not going to ever run
the test.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
A previous commit had mistakenly overwritten the copyright years instead
of extending the range. Fix this mistake so that the proper range is
recorded.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The existing nrf5_common.h now applies to other Nordic ICs that are not
part of the "5" family. Instead rename this to nrf_common.h to cover the
upcoming ICs that belong to other families.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Upcoming Nordic ICs that share many of the peripherals and architecture
with the currently supported nRF5x ones are no longer part of the nRF5
family. In order to accomodate that, rename the SoC family from nrf5 to
nrf, so that it can contain all of the members of the wider Nordic
family.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This creates zeth network interface in your host and allows user
to send and receive data sent to this network interface.
Fixes#6007
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As following commits need this functionality, create a function
which converts "01:02:ab:fe:34:dd" type hex strings to array of
bytes. Change the SLIP driver to use this new function.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
STM32F0 flash driver already uses FLASH_PAGE_SIZE from HAL
in flash layout part, so CONFIG_FLASH_PAGE_SIZE is redundant
and confusing.
Signed-off-by: Ilya Tagunov <tagunil@gmail.com>
For ISOOUT transaction, check if the buffer is empty before starting
the DMA and for ISOIN case check if the buffer is available to start
the DMA for IN transaction. This handling was swapped. So, handle it
accordingly.
Signed-off-by: Sundar Subramaniyan <sundar.subramaniyan@gmail.com>
Problem:
cdc_acm sample outputs junk characters to the console when any key
is pressed. It is supposed to echo the same character as the input.
Analysis:
nRF52840 USB driver always reads 64 bytes from the USB peripheral's
local buffer irrespective of the data length. Even when 1 byte
is sent by the host, the usb driver receives as 64 bytes.
Since the maximum packet size value had been used when setting up
the EasyDMA's MAXCNT register for OUT transactions, DMA transffered
the entire 64 bytes of it's local buffer into the data RAM
irrespective of the OUT data length, containing garbage at the end
of useful payload. For some applications like hci_usb the extra
bytes were being ignored. But for cdc_acm, the entire 64 bytes
is getting echoed back displaying garbled characters on the terminal.
Fix:
For OUT endpoints, the amount of data received by USBD to its local
buffer should be read using SIZE.EPOUT[x] registers in the case of
BULK and INTERRUPT endpoints and SIZE.ISOOUT register for ISOOUT
endpoint. This value should be set to the EasyDMA maxcnt register
to DMA into RAM buffer. Fix this issue for Bulk, Interrupt and
ISOOUT endpoints.
Signed-off-by: Sundar Subramaniyan <sundar.subramaniyan@gmail.com>
For now tx-fifo sizes are not configured (cf usb_dw_set_fifo).
Default fifo size is 136 bytes and sending more than 136 bytes
makes the data split into incorrect chunk size.
This patch prevents this by reducing available fifo size to a
multiple of the endpoint max packet size.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Fixes#6577.
Wait for all ongoing transmits to complete before de-asserting CS.
When doing a tx then rx, wait for the previous tx to complete before
flushing the rx buffer.
Tested on the Arduino Zero against a Olimex MOD-NRF24L module.
Signed-off-by: Michael Hope <mlhx@google.com>