arch/x86: disable i8259 in crt0.S

drivers/interrupt_controller/i8259.c is not a driver; it exists
solely to disable the i8259s when the configuration calls for it.
The six-byte sequence to mask the controllers is moved to crt0.S
and the pseudo-driver is removed.

Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This commit is contained in:
Charles E. Youse 2019-06-04 09:39:59 -07:00 committed by Anas Nashif
commit 6aedb6ff1a
3 changed files with 11 additions and 54 deletions

View file

@ -415,6 +415,17 @@ __csSet:
1:
#endif
#if defined(CONFIG_PIC_DISABLE)
/*
* "Disable" legacy i8259 interrupt controllers. Note that we
* can't actually disable them, but we mask all their interrupt
* sources which is effectively the same thing (almost).
*/
movb $0xff, %al /* all bits set = mask all interrupts */
outb %al, $0x21 /* set i8259 master mask (IRQs 0-7) */
outb %al, $0xA1 /* set i8259 slave mask (IRQs 8-15) */
#endif
/* Jump to C portion of kernel initialization and never return */
jmp z_cstart

View file

@ -5,7 +5,6 @@ zephyr_sources_ifdef(CONFIG_IOAPIC ioapic_intr.c)
zephyr_sources_ifdef(CONFIG_LOAPIC loapic_intr.c system_apic.c)
zephyr_sources_ifdef(CONFIG_LOAPIC_SPURIOUS_VECTOR loapic_spurious.S)
zephyr_sources_ifdef(CONFIG_MVIC mvic.c)
zephyr_sources_ifdef(CONFIG_PIC_DISABLE i8259.c)
zephyr_sources_ifdef(CONFIG_PLIC plic.c)
zephyr_sources_ifdef(CONFIG_SHARED_IRQ shared_irq.c)
zephyr_sources_ifdef(CONFIG_EXTI_STM32 exti_stm32.c)

View file

@ -1,53 +0,0 @@
/*
* Copyright (c) 2010-2015 Wind River Systems, Inc.
*
* SPDX-License-Identifier: Apache-2.0
*/
/**
* @file
* @brief Disable Intel 8259A PIC (Programmable Interrupt Controller)
*
* This module disables the Intel 8259A PIC (Programmable Interrupt Controller)
* to prevent it from generating spurious interrupts.
*/
#include <kernel.h>
#include <arch/cpu.h>
#include <toolchain.h>
#include <linker/sections.h>
#include <device.h>
#include <init.h>
/* programmable interrupt controller info (pair of cascaded 8259A devices) */
#define PIC_MASTER_BASE_ADRS 0x20
#define PIC_SLAVE_BASE_ADRS 0xa0
#define PIC_REG_ADDR_INTERVAL 1
/* register definitions */
#define PIC_ADRS(baseAdrs, reg) (baseAdrs + (reg * PIC_REG_ADDR_INTERVAL))
#define PIC_PORT2(base) PIC_ADRS(base, 0x01) /* port 2 */
#define PIC_DISABLE 0xff /* Disable PIC command */
/**
*
* @brief Initialize the Intel 8259A PIC device driver
*
* This routine disables the 8259A PIC device to prevent it from
* generating spurious interrupts.
*
* @return N/A
*/
int _i8259_init(struct device *unused)
{
ARG_UNUSED(unused);
sys_out8(PIC_DISABLE, PIC_PORT2(PIC_SLAVE_BASE_ADRS));
sys_out8(PIC_DISABLE, PIC_PORT2(PIC_MASTER_BASE_ADRS));
return 0;
}
SYS_INIT(_i8259_init, PRE_KERNEL_1, CONFIG_KERNEL_INIT_PRIORITY_DEFAULT);