After introducing persistent storage, it's useful for an app to check
if the node has been provisioned or not.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This patch introduces several changes to support OPTIONAL resources.
The primary indicator for this behavior is to assign FLAG_OPTIONAL
to the object field's permission flags.
These resources are not setup by the LwM2M object code. They are
left up to the user-based code for initialization via the following
functions:
lwm2m_engine_set_res_data()
lwm2m_engine_get_res_data()
When assigning const-based data as a data buffer, user-based code can
also specify the following data flag: LWM2M_RES_DATA_FLAG_RO
The FLAG_OPTIONAL flag also affects the LwM2M engine in the following
ways:
- CREATE operations won't generate an error if optional resources are
not included.
- Object instance READ operations won't complain about missing
optional resources.
- In the future, BOOTSTRAP operations can have different handling
based on optional resources.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
In the future, we will have optional resources that may or may
not be assigned a buffer for data storage. When these resources
are queried we need to be able to return an error code if the
buffer isn't set.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Similar to UDP, some drivers can make use of the following functions:
net_tcp_get_hdr()
net_tcp_set_hdr()
Let's expose them as <net/tcp.h> and change all internal references
to "tcp_internal.h".
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
This commit fixes the SecureFault IRQ number for non-CMSIS
compliant ARM Cortex-M MCUs. Erroneous IRQ number was introduced
in ec398e87796f8da2529f369746ae9b2b12d48ca4.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Deprecated k_call_stacks_analyze() API as it is only
dumping (printing) the statically defined main, idle,
work and ISR stacks.
Use k_thread_foreach() API which is a generic API
to iterate over threads.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Add k_thread_foreach API to iterate over all the threads in
the system.
This API can be used for debugging threads in multi threaded
environment to dump and analyze various thread parameters like
priority, state, stack address etc...
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Zephyr supports fatfs, nffs and fcb as storage layer. fatfs and nffs
are less suited for application in memory restricted IC's. fcb has a
smaller footprint but has a complex api.
The proposed module is a module with a even smaller footprint compared
to fcb and a simple interface for reading and writing entries. The
module provides wear levelling of flash. This allows the module to be
used not only to store configuration settings but to store device state
(e.g. state of a light switch over reboots) of a zephyr device.
Fixes buffer overflow by introducing maximum read length in nvs_read()
and nvs_read_hist().
Fixes nvs_write() not to reflash the same data. Allows the user to do
call nvs_write() for all defined entries without worries about flash
wear.
Fixes garbage collection error where wrong data could be copied.
Add nvs_delete() to allow deleting a stored entry. A deleted entry will
not be copied to a new flash sector
Include flash wear information in the README.md documentation
0/25 Update module after reviewers remarks, added documentation to
nvs.h, removed README.md by nvs.rst in doc/subsystems folder
04/26 Update module after reviewers remarks, updated nvs.rst, added more
documentation to samples/subsys/nvs/src/main.c, updated doxygen info
in nvs.h (hope this time it works).
04/26 Update subsystems.rst to include nvs.restart
04/27 Updated nvs.c and nvs.h to avoid a possible flash deletion loop
when the file system is full.
04/29 Updated nvs_write to detect and ignore deletes of non-existing
items
05/06 Update NVS module to return standard error codes, removed low
level API, added configuration options. NVS now uses the board dts to
determine the flash storage location (FLASH_AREA_STORAGE_OFFSET).
05/06 Update nvs.rst. Updated intendation and added intermediate
variables in nvs.c to make the code easier to read.
05/06 Update nvs.rst.
05/07 Update nvs.rst
05/08 Changed the API to a more standard file system API.
05/08 Removed cnt_max from nvs_read() as it is not used.
05/08 Removed #ifdef(CONFIG_NVS_LOG) from nvs_priv.h, now the module can
be build with debugging off.
05/09 Removed configuration options for SECTOR_SIZE, SECTOR_COUNT and
MAX_ELEM_SIZE. It is now easy to support multiple NVS filesystems on
one or multiple devices. Changed logging to support newlib systems.
Thanks to Olivier Martin for reporting and proposed changes.
Signed-off-by: Laczen JMS <laczenjms@gmail.com>
This ensures the every characteristic has a value attribute declared
with the same UUID since the old macro did not declare the value the
application would normally have to declare one itself using a different
UUID which is not allowed.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds BT_GATT_ATTRIBUTE which replaces BT_GATT_DESCRIPTOR as the
most basic way to declare an attribute since using descriptor may be
confusing when declaring things like a characteristic value since the
Bluetooth has their procedures completely separated.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
New API enables setting watchdog timeout in the unit of microseconds.
It is possible to configure watchdog timer behavior in CPU sleep state
as well as when it is halted by the debugger.
It supports watchdogs with multiple reload channels.
Jira: ZEP-2564
Signed-off-by: Michał Kruszewski <michal.kruszewski@nordicsemi.no>
Signed-off-by: Karol Lasończyk <karol.lasonczyk@nordicsemi.no>
The sequence number was acting as a stop-gap for missing persistent
storage. Now that we have the settings support in place it's no longer
needed.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add support for storing the heartbeat publication persistently. The
information is only stored as "publish indefinitely" or as "periodic
publishing disabled" since we can't know for how long the node is
powered off. The information is stored under the settings key
bt/mesh/HBPub.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Keeping the model struct same sized, change the element pointer to two
indexes, and add a flags member that will be used to track pending
storage actions.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There are valid use cases where the model layer must know the true
destination address. So far only the fact that it was one of the
addresses that the model subscribes to (its element's unicast
included) has been knowable.
Solve the issue by moving the destination address from the internal
net_rx context to the public bt_mesh_msg_ctx struct.
Fixes#7453
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There are certain use cases where the application needs to be able to
explicitly set a specific identity address. This was previously
possible using the bt_storage API, however now that it's gone another
solution is needed.
This patch adds a ne bt_set_id_addr() API which the application can
use to set a specific identity address before calling bt_enable().
Fixes#7434
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Newlib uses any RAM between _end and the bounds of physical
RAM for the _sbrk() heap. Set up a user-writable region
so that this works properly on x86.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add support for multiple instances of a file system by
making use of mount point as the disk volume name which
is used by the file system library while formatting or
mounting a disk.
Also moved out file system specific data structures from
public fs.h header and handled them in corresponding
file system interface files by introducing open files and
open directories concept which is already being used in
NFFS interface module. Now it is extended to FatFs as well.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Add support for enabling multiple disk interfaces (Flash, RAM)
simultaneously in Zephyr by introducing a simple disk interface
framework where we can register multiple disks which would
interface with different storage devices. This would enable us
to have multiple instances of FATFS in Zephyr.
Add support for mass storage drive disk name which will be
used as an argument when calling the disk interface API's.
Enable multiple volumes support configuration in
ELM FAT library.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Extend storage_dev type beyond 'struct device' by changing
the variable type to void pointer. This will be needed if we
have additional transactional layers b/w filesystem and the
actual backend device.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
The pinmux subsystem does not have any API documenation. Currently
none of the existing pinmux drivers do any kind of input validation
for the pin/op parameters, which has been shown to allow the caller
to access unauthorized memory, up to and including disabling the
MPU.
This requires a proper specification for the pinmux subsystem and
also modification of existingd drivers to validate arguments on a per
driver basis. Remove user mode access until #7390 is resolved.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add a new linker section for a list of submodule settings handlers,
and iterate the list from the various settings callbacks.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The same functionality is now supported by the settings-based
solution, so remove bt_storage out of the way. There were stubs in
bt_storage to handle per-peer information (e.g. pairing keys) but this
was never actually implemented in full. The next step is to add this
support to the settings-based solution.
Leave the code for generating temporary IRK and identity address in
case BT_SETTINGS is not enabled. Also leave the code for using vendor
HCI to read the identity address, in which case the settings
implementation will not touch it.
Introduce a new bt_unpair() API to replace the removed
bt_storage_clear(), since the latter was actually doing more than just
storage management: it was also handling runtime storage of pairing
information. Later, the bt_unpair() implementation will be extended to
clear settings-based pairing storage.
There is one feature that the bt shell module looses: the ability to
give a specific identity address to the "init" command as a parameter.
We might look later in the future if this is really needed, and add a
separate API for this.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add system call handler support to LED subsystem. No buffers are
involved in any of the API's and hence the syscall support is
straightforward.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Add functions that will return correct source IPv4 address
according to given destination address. This is done similar
way as for IPv6.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The 'valid' member of struct bt_gatt_ccc_cfg was redundant, since
setting 'peer' to BT_ADDR_LE_ANY does the same job. What's worse, the
handling of 'valid' was also buggy in that some places looking for
valid CCC structs only matched the address, meaning it might yield a
positive match for invalid entries.
Fix these issues by removing the 'valid' struct member, and solely
using the 'peer' member to identify valid entries. Also simplify the
code by acknowledging that no CCC entry is essentially the same as the
value '0' written to CCC.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This was wrong in two ways, one subtle and one awful.
The subtle problem was that the IRQ lock isn't actually globally
recursive, it gets reset when you context switch (i.e. a _Swap()
implicitly releases and reacquires it). So the recursive count I was
keeping needs to be per-thread or else we risk deadlock any time we
swap away from a thread holding the lock.
And because part of my brain apparently knew this, there was an
"optimization" in the code that tested the current count vs. zero
outside the lock, on the argument that if it was non-zero we must
already hold the lock. Which would be true of a per-thread counter,
but NOT a global one: the other CPU may be holding that lock, and this
test will tell you *you* do. The upshot is that a recursive
irq_lock() would almost always SUCCEED INCORRECTLY when there was lock
contention. That this didn't break more things is amazing to me.
The rework is actually simpler than the original, thankfully. Though
there are some further subtleties:
* The lock state implied by irq_lock() allows the lock to be
implicitly released on context switch (i.e. you can _Swap() with the
lock held at a recursion level higher than 1, which needs to allow
other processes to run). So return paths into threads from _Swap()
and interrupt/exception exit need to check and restore the global
lock state, spinning as needed.
* The idle loop design specifies a k_cpu_idle() function that is on
common architectures expected to enable interrupts (for obvious
reasons), but there is no place to put non-arch code to wire it into
the global lock accounting. So on SMP, even CPU0 needs to use the
"dumb" spinning idle loop.
Finally this patch contains a simple bugfix too, found by inspection:
the interrupt return code used when CONFIG_SWITCH is enabled wasn't
correctly setting the active flag on the threads, opening up the
potential for a race that might result in a thread being scheduled on
two CPUs simultaneously.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The #ifdef protections are not needed, and in fact prevent helpers
such as IS_ENABLED() from being used when calling APIs which are
optional.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Modify the linker script with the command INSERT.
It instructs the linker to augment the default linker script
SECTIONS with the ones provided with the one provided in
this script.
It also modified the meaning of the -T switch, so it no longer
replaces the default linker script
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
According to IEEE 802.1Q the VLAN priority (PCP) is not directly mapped
to the network packet priority. The Best Effort priority has a PCP value
of 0. The lowest priority (Background) has a PCP value of 1.
All the values are mapped according to the following table:
+-----+-----+---------+
| PCP | PRI | Acronym |
+-----+-----+---------+
| 1 | 0 | BK |
| 0 | 1 | BE |
| 2 | 2 | EE |
| 3 | 3 | CA |
| 4 | 4 | VI |
| 5 | 5 | VO |
| 6 | 6 | IC |
| 7 | 7 | NC |
+-----+-----+---------+
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Implements the driver for Intel CAVS I2S. Only Playback
is currently supported.
Change-Id: I7b816f9736dc35e79a81d3664d6405dc0aac15b4
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This patchset provides Xtensa's xcc compiler support for Xtensa
projects in Cmake. This requires the below environment variables
to be defined aptly. The appropriate xcc license information also
need to be supplied.
ZEPHYR_GCC_VARIANT=xcc
TOOLCHAIN_VER=RF-2015.3-linux
XTENSA_CORE=cavs21_LX6HiFi3_RF3_WB16
XTENSA_SYSTEM=/opt/xtensa/XtDevTools/install/tools/
RF-2015.3-linux/XtensaTools/config/
XTENSA_BUILD_PATHS=/opt/xtensa/XtDevTools/install/builds/
Change-Id: Ib3c10e8095439b0e32276ff37c00eca8420773ec
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
intel_s1000 has multiple levels of interrupts consisting of core, CAVS
Logic and designware interrupt controller. This patchset modifies
the regular gen_isr mechanism to support these multiple levels.
Change-Id: I0450666d4e601dfbc8cadc9c9d8100afb61a214c
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
CAVS interrupt logic is an intel IP that combines several sources of
interrupt into one line that is then routed to the parent controller.
CAVS stands for "connected Audio, Voice and Speech". This IP supports
4 lines which can have a max of 32 interrupts each.
Change-Id: Ia6be51428bedf1011d148ae1fc5d4c34252c05da
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
intel_s1000 uses DesignWare IP for UART. National Semiconductor
16550 (UART) component specification is followed in this IP.
Change-Id: Ied7df1dc178d55b6dbe71d729d6383ba07274ea4
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This trades a little bit over 40 bytes (on x86) of text for a lot of
savings in rodata. This is accomplished by using bitfields to pack the
field name length, offset, alignment, and the type tag into a single
32-bit unsigned integer instead of scattering this information into
four different integers.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
BUILD_ASSERT() macro makes use of __COUNTER__ which may not be
supported in some compilers (like xcc). So, multiple uses of
BUILD_ASSERT() in same scope is not possible for such compilers.
Instead, the expression to BUILD_ASSERT can be "&&"ed to achieve
the same purpose.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
Singly-linked lists work in a specific way, but this will allow
slist semantics to be defined for any data structure that can store
a "next" pointer in any way at all, possibly something not even
a pointer value, but a table index.
The immediate need for this patch is to allow the easy definition
of an slist variant which stores flags in the low-order bits of the
node pointer.
The compiler does not need them, but the function prototypes have
been left in slist.h to make the header easier to understand by
the end user and not confuse Doxygen.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add support for LED APIs for controlling the LED devices. This
API can be used by the LED devices present on the chip and connected
externally via buses like I2C, SPI etc...
Following APIs are currently supported:
1. led_blink
2. led_set_brightness
3. led_on
4. led_off
Driver support using these APIs will be added in subsequent patches.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
The http.h used HTTP server defines when compiling HTTP client.
This causes compilation error.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When MMU is enabled and the SOC we are running doesn't have
execute in-place(XIP) the final image will be a monolith which
sits in RAM. In such situations we need to maintain the alignment
for application memory. If not maintained the MMU boot tables
will not be configured properly.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Driver APIs might not implement all operations, making it possible for
a user thread to get the kernel to execute a function at 0x00000000.
Perform runtime checks in all the driver handlers, checking if they're
capable of performing the requested operation.
Fixes#6907.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
API settings_subsys_init call was changed so that it returns
error (so returns int instead of void).
Prototype of storage helper function export_func for
settings_handler::h_export was changed so that it returns error
(so returns int instead of void).
Fixed few other error handling issues by ignoring return
values.
Tests were aligned to above patches.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
A red-black tree is maintained containing the metadata for all
dynamically created kernel objects, which are allocated out of the
system heap.
Currently, k_object_alloc() and k_object_free() are supervisor-only.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Ensure this value during static initialization (with build assertions),
and dynamic initializations through system calls.
If initial count is larger than the limit, it's possible for the count
to wraparound, causing locking issues.
Expanding the BUILD_ASSERT() macros after declaring a k_sem struct in
K_SEM_DEFINE() is necessary to support cases where a semaphore is
defined statically.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
BUILD_ASSERT() was always defining a type with the name
__build_assert_failure, causing issues if more than one assertion were
used in the same scope.
Also, use an enum instead of a typedef to avoid (possibly spurious)
warnings such as these:
variably modified ‘__build_assert_failure1’ at file scope [-Werror]
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
These functions were not used throughout the Zephyr code base, and
as such has been removed. They can be reinstated if there's a need,
but will need to be adapted to use retpolines when CONFIG_RETPOLINE
is set.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
In order to mitigate Spectre variant 2 (branch target injection), use
retpolines for indirect jumps and calls.
The newly-added hidden CONFIG_X86_NO_SPECTRE flag, which is disabled
by default, must be set by a x86 SoC if its CPU performs speculative
execution. Most targets supported by Zephyr do not, so this is
set to "y" by default.
A new setting, CONFIG_RETPOLINE, has been added to the "Security
Options" sections, and that will be enabled by default if
CONFIG_X86_NO_SPECTRE is disabled.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
The only difference between this call and k_thread_abort() (beyond
some minor performance deltas) is that "cancel" will act as a noop in
cases where the thread has begun execution and will return an error.
"Abort" always succeeds, of course. That is inherently racy when used
as a "stop the thread" API: there's no way in general (or at all in
SMP situations) to know that you're calling this function "early
enough" to catch the thread before it starts.
Effectively, all k_thread_cancel() gives you that k_thread_abort()
doesn't is an indication about whether or not a thread has started.
There are many other ways to get that information that don't require
dangerous kernel APIs.
Deprecate this function. Zephyr's own code never used it except for
its own unit test.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
There was a somewhat promiscuous pattern in the kernel where IPC
mechanisms would do something that might effect the current thread
choice, then check _must_switch_threads() (or occasionally
__must_switch_threads -- don't ask, the distinction is being replaced
by real English words), sometimes _is_in_isr() (but not always, even
in contexts where that looks like it would be a mistake), and then
call _Swap() if everything is OK, otherwise releasing the irq_lock().
Sometimes this was done directly, sometimes via the inverted test,
sometimes (poll, heh) by doing the test when the thread state was
modified and then needlessly passing the result up the call stack to
the point of the _Swap().
And some places were just calling _reschedule_threads(), which did all
this already.
Unify all this madness. The old _reschedule_threads() function has
split into two variants: _reschedule_yield() and
_reschedule_noyield(). The latter is the "normal" one that respects
the cooperative priority of the current thread (i.e. it won't switch
out even if there is a higher priority thread ready -- the current
thread has to pend itself first), the former is used in the handful of
places where code was doing a swap unconditionally, just to preserve
precise behavior across the refactor. I'm not at all convinced it
should exist...
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This macro has been deprecated in favor of K_DECLARE_STACK; should have
been removed by 1.11.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
The original exception handling has space to optimize and
and some bugs need to be fixed.
* define NANO_ESF
* add the definition of NANO_ESF which is an irq_stack_frame
* add the corresponding codes in exception entry and handler
* remove _default_esf
* implement the _ARCH_EXCEPT
* use trap exception to raise exception by kernel
* add corresponding trap exception entry
* add _do_kernel_oops to handle the exception raised by
_ARCH_EXCEPT.
* add the thread context switch in exception return
* case: kernel oops may raise thread context switch
* case: some tests will re-implement SysFatalHandler to raise
thread context switch.
* as the exception and isr are handled in kernel isr stack, so
the thread context switch must be in the return of exception/isr
, and the exception handler must return, should not be decorated
with FUNC_NORETURN
* for arc, _is_in_isr should consider the case of exception
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
This patch changes the ARM system calls to use registers for passing
or arguments. This removes the possibility of stack issues when
callers do not adhere to the AAPCS.
Fixes#6802
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Create a dt-bindings/gpio.h file.
Bindings definitions are extracted from existing gpio.h.
gpio dt-bindings file is required because existing gpio.h file could
not be parsed by dts parser.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
If we have multiple network interfaces and we want to send
a IPv4 network packet to certain destination, then this new
helper can be used to figure out what network interface to use.
Note that this commit only adds support to select the correct network
interface according to destination IPv4 address. This does not enable
any automatic routing to happen.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Aesthetical changes to the documentation about GPIO flags - group
them together, add some headers, some minor markup and wording
modifications.
Signed-off-by: Iván Sánchez Ortega <ivan@sanchezortega.es>
Exposing connect, disconnect and scan for now.
In case the iface is an instance of a WiFi offload device, the way it
manages scanning, connecting and disconnecting will be specific to that
device (not the mgmt interface obviously). In such case the device will
have to export relevantly a dedicated bunch of function to serve the
mgmt interface in a generic way.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Add empty WiFi network management functions that only return -ENETDOWN.
Define management handlers for scan, connect and disconnect requests,
again without any implementation nor parameters defined.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
First because nobody needs to know that besides net_mgmt core and
secondary to avoid possible circular dependancy on
net_mgmt.h/net_event.h.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Drivers will be directly contacted via net_if's offload attribute. No
need for a an extra layer as an L2.
Signed-off-by: Dario Pennisi <dario@iptronix.com>
Signed-off-by: Massimiliano Agneni <massimiliano.agneni@iptronix.com>
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Make sure we are able to collect ethernet statistics and query
it via net management API.
Fixes#6899
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Returns true if the specified node is in the tree. Allows the tree to
be used for "set" style semantics along with a lessthan_fn that simply
compares the nodes by their address.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
A balanced tree implementation for Zephyr as we grow into bigger
regimes where simpler data structures aren't appropriate.
This implements an intrusive balanced tree that guarantees O(log2(N))
runtime for all operations and amortized O(1) behavior for creation
and destruction of whole trees. The algorithms and naming are
conventional per existing academic and didactic implementations, c.f.:
https://en.wikipedia.org/wiki/Red%E2%80%93black_tree
The implementation is size-optimized to prioritize runtime memory
usage. The data structure is intrusive, which is to say the struct
rbnode handle is intended to be placed in a separate struct the same
way other such structures (e.g. Zephyr's dlist list) and requires no
data pointer to be stored in the node. The color bit is unioned with
a pointer (fairly common for such libraries). Most notably, there is
no "parent" pointer stored in the node, the upper structure of the
tree being generated dynamically via a stack as the tree is recursed.
So the overall memory overhead of a node is just two pointers,
identical with a doubly-linked list.
Code size above dlist is about 2-2.5k on most architectures, which is
significant by Zephyr standards but probably still worthwhile in many
situations.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This will permit to tweak ethernet L2 and devices settings at runtime.
Currently, only devices settings are tweaked through this interface.
Fixes#6640
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Depending on what's supported by the device, it could be possible to
configure these at runtime such as auto-negociation, link speed, etc...
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Function should be exposed if only vlan is enabled.
Also, changing vlan_setup's signature to stay consistent with device
driver API.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Curently only link speed is exposed.
Opportunity taken to remove any post-fix enumerating the iface init
and/or the api: these must be generic and used by all the instances.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Instead of one global statistics, collect statistics information
separately for each network interface. This per interface statistics
collection is optional but turned on by default. It can be turned
off if needed, in which case only global statistics are collected.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that we return proper network statistics data if
someone asks it via network management interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This patch lets a C++ application use more of Zephyr by adding guards
and changeing some constructs to the C++11 equivalent.
Changes include:
- Adding guards
- Switching to static_assert
- Switching to a template for ARRAY_SIZE as g++ doesn't have the
builtin.
- Re-ordering designated initialisers to match the struct field order
as G++ only supports simple designated initialisers.
Signed-off-by: Michael Hope <mlhx@google.com>
int_in_ready is an optional callback that is called when the current
interrupt IN transfer has completed. This can be used to wait for the
endpoint to go idle or to trigger the next transfer.
This is needed for protocols like FIDO U2F that use the interrupt
endpoint for transfers.
Signed-off-by: Michael Hope <mlhx@google.com>
This patch introduce doc for settings subsystem
with FCB and File System beck-ends.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
As the l2_data section might contain different size context elements
like "struct ethernet_context" for Ethernet and "void *" for
Dummy L2, remove the __net_l2_start and __net_l2_end variables so
that user does not accidentally try to use them as that would not work.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Move posix layer from 'kernel' to 'lib' folder as it is not
a core kernel feature.
Fixed posix header file dependencies as part of the move and
also removed NEWLIBC related macros from posix headers.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
We would like to offer the capability to have memory pool heap data
structures that are usable from user mode threads. The current
k_mem_pool implementation uses IRQ locking and system-wide membership
lists that make it incompatible with user mode constraints.
However, much of the existing memory pool code can be abstracted to some
common functions that are used by both k_mem_pool and the new
sys_mem_pool implementations.
The sys_mem_pool implementation has the following differences:
* The alloc/free APIs work directly with pointers, no internal memory
block structures are exposed to the end user. A pointer to the source
pool is provided for allocation, but freeing memory just requires the
pointer and nothing else.
* k_mem_pool uses IRQ locks and required very fine-grained locking in
order to not affect system latency. sys_mem_pools just use a semaphore
to protect the pool data structures at the API level, since there aren't
implications for system responsiveness with this kind of concurrency
control.
* sys_mem_pools do not support the notion of timeouts for requesting
memory.
* sys_mem_pools are specified at compile time with macros, just like
kernel memory pools. Alternative forms of specification at runtime
will be a later enhancement.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The DEVICE_NAME_GET() macro should be used instead of fixed
string when creating a device pointer in net_if_dev structure.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Currently the VLAN priority is the same as packet priority but
if such conversion is needed, then this function can be used
for such conversion.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This allows creation of virtual lan (VLAN) networks. VLAN support is
only available for ethernet network technology.
Fixes#3234
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Currently sleep and usleep functions are into unistd.h file.
unistd includes toold chain secific unistd.h file and this file
too has declaration for these functions. This is in conflict when
posix specific unistd.h is included.
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
Some device may need to be put up on CS high logic. The active low logic
is the default as usual, but it is now possible to request the active
high logic.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
EEPROM mode can be, in fact, asserted from tx_bufs/rx_bufs thus removing
it.
Fixes#5839
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Instead of using CONFIG_POLL, which is not directly related to SPI and
is a kernel option, let's have SPI_ASYNC instead. When enabled, it will
select POLL automatically.
Fixes#5839
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
tx_bufs/tx_count and rx_bufs/rx_count can be hold in another dedicated
structure, thus reducing the number of parameters to transceive. This
permits to avoid using the stack when calling transceive.
Since we saved parameters, we can expose back the struct device pointer,
to stay consistent with other device driver APIs.
Fixes#5839
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
As the content of this struct will not be modified by drivers, it's
better to pass it as constant. Also, if someday struct device can be
made contant too, this change will make spi ready for registering the
spi_config into ROM directly.
Fixes#5839
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Some device include a temperature sensor, usually used as a
companion for helping in drift compensation, that measure the
die temperature. This temperature IS NOT related to the the
ambient temperature, hence a clean separation between the two
is required.
This commit introduces a clean separation between the two
types of temperature leaving the old deprecated definition
still there.
The list of current drivers that read the die (and not the ambient)
temperature is the following:
- adxl362
- bma280
- bmg160
- bmi160
- fxos8700
- lis3mdl
- lsm6ds0
- lsm6dsl
- lsm9ds0
- mpu6050
Signed-off-by: Armando Visconti <armando.visconti@st.com>
For posix layer implementation of message queue, we need to fetch
basic attributes of message queue. Currently this routine is not
present in Zephyr. So adding this routing into message queue.
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
User mode shouldn't be able to read/write to this memory directly,
needs to be done on its behalf by driver system calls.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The __net_if_align was removed in earlier commits but it needs
to come back as in some arch the alignment of net_if section
will be wrong.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Adapt the MyNewt non-volatile configuration system to become a settings
system in Zephyr.
The original code was modifed in the following ways:
* Renamed from config to settings
* Use the zephyr FCB, FS API, and base64 subsystems
* lltoa like function was added to sources as it was required but not
included in Zephyr itself.
* The original code was modified to use Zephyr's slist.h as single
linked list implementation.
* Reworked code which was using strtok_r, added function
for decoding a string to a s64_t value.
* Thank to the above the settings subsys doesn't require newlibc anymore.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
__packed allows the struct to be linked at a non-word size boundrary
which causes an unaligned access fault on the Cortex-M0+.
Signed-off-by: Michael Hope <mlhx@google.com>
There can be lot of traffic class threads and each will have
their own stacks. This can trigger issue when traversing the
stacks list in "net stacks" shell command. To overcome this issue,
we need to align each net_stack_info struct by 32 bytes. This is
the same issue that happened with net_if earlier.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add statistics for number of packets and bytes to each traffic
class. Print this information in net-shell.
Also make sure that we do not calculate total packet length many
times. So calculate network packet total length once and then use
that value instead of calculating it many times in a row.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
With this commit it is possible to add priority to sent or received
network packets. So user is able to send or receive higher priority
packets faster than lower level packets.
The traffic class support is activated by CONFIG_NET_TC_COUNT option.
The TC support uses work queues to separate the traffic. The
priority of the work queue thread specifies the ordering of the
network traffic. Each work queue thread handles traffic to one specific
work queue. Note that you should not enable traffic classes unless
you really need them by your application. Each TC thread needs
stack so this feature requires more memory.
It is possible to disable transmit traffic class support and keep the
receive traffic class support, or vice versa. If both RX and TX traffic
classes are enabled, then both will use the same number of queues
defined by CONFIG_NET_TC_COUNT option.
Fixes#6588
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allow caller to create array of thread stacks using
NET_STACK_ARRAY_DEFINE() macro. This allows more debug information
to be printed by "net stacks" command.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add context option support and implement PRIORITY option that
can be used to classify the network traffic to different trafic
classes according to said priority value.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of always allocating both IPv6 and IPv4 address information
to every network interface, allow more fine grained address
configuration. So it is possible to have IPv6 or IPv4 only network
interfaces.
This commit introduces two new config options:
CONFIG_NET_IF_MAX_IPV4_COUNT and CONFIG_NET_IF_MAX_IPV6_COUNT
which tell how many IP address information structs are allocated
statically. At runtime when network interface is setup, it is then
possible to attach this IP address info struct to a specific
network interface. This can save considerable amount of memory
as the IP address information struct can be quite large (depends
on how many IP addresses user configures in the system).
Note that the value of CONFIG_NET_IF_MAX_IPV4_COUNT and
CONFIG_NET_IF_MAX_IPV6_COUNT should reflect the estimated number of
network interfaces in the system. So if if CONFIG_NET_IF_MAX_IPV6_COUNT
is set to 1 and there are two network interfaces that need IPv6
addresses, then the system will not be able to setup IPv6 addresses to
the second network interface in this case. This scenario might be
just fine if the second network interface is IPv4 only. The net_if.c
will print a warning during startup if mismatch about the counts and
the actual number of network interface is detected.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Move IP address settings from net_if to separate structs.
This is needed for VLAN support.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The ifdef'ing is re-ordering things so that the documentation is
either to far away from the implementation, or in the wrong
order (implementation and then documentation).
This commit reorders the macros and documentation so that we avoid
long-spanning #ifdef's and we keep the documentation at the head of
the implementation.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
As per the Apache v2 License, state changes made to the original code in
the modified version of the files.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Since base64 is such a simple and commonly used feature it makes no
sense to build the whole of mbedTLS for it. Instead take the
implementation that comes with mbedTLS and import it as a native library
outside of ext/ for all to use directly.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Create infrastructure that allows ethernet device driver to tell
if it supports network packet checksum offloading. This applies only
to IPv4, UDP or TCP checksums. The driver can enable/disable checksum
offloading separately for Tx and Rx network packets.
If the device (ethernet in this case) can calculate the network
packet checksum for IPv4, UDP or TCP, then do not calculate the
corresponding checksum by the stack itself.
Fixes#2987
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Modifies several functions that are causing wrong
behaviour.
* semaphore.h: add missing restrict keyword.
* sem_destroy(): check that nobody is waiting
before destroying the object.
* sem_timedwait(): simpify function logic and
fix a bug when abstime > currtime, that passed
ticks instead of ms to k_sem_take().
* sem_wait(): avoid unnecessary checks.
* sem_init(): add pshared value assertion.
Signed-off-by: Juan Manuel Torres Palma <j.m.torrespalma@gmail.com>
This was originally added as a work-around to avoid the heavy stack
consumption of the TinyCrypt PRNG when generating NRPAs. This is
no-longer an issue, and there are in fact no (in-tree) users of this.
Remove it before it gains any wider users, since it was in many ways a
hack/work-around to begin with.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In some cases the app may want to force using the identity address
regardless of privacy support or what type of advertising is done.
Provide such an option in bt_le_adv_param.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add freeaddrinfo() to complement getaddrinfo().
Existing applications using getaddrinfo() will usually free
allocated memory using freeaddrinfo(). Even if nothing is allocated
the function should exist to avoid having to change the application
when porting.
Signed-off-by: Stig Bjørlykke <stig.bjorlykke@nordicsemi.no>
Avoid listing internal function in the public API documentation. After
enabling those doxygen configs, we go lots of errors and bad refs that
were fixed.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The k_mem_partition structs need to be placed in the kernel memory.
This patch ensures that these structs are placed correctly.
Also when a struct k_mem_domain is declared it is advised to add
__kernel.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
If CONFIG_NET_DEBUG_NET_PKT was enabled, then a call to
net_pkt_get_reserve_data() was calling wrong debug function
which caused compile error.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add support for MSG_PEEK flag in recv and recvfrom.
This flag is needed when using non-zephyr embedded applications with
Zephyr's socket API.
Signed-off-by: Stig Bjørlykke <stig.bjorlykke@nordicsemi.no>
Define IRQ number for SecureFault Handler when building Secure
Firmware for non-CMSIS-compliant ARM Cortex-M MCUs.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
As following commits need this functionality, create a function
which converts "01:02:ab:fe:34:dd" type hex strings to array of
bytes. Change the SLIP driver to use this new function.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add support for MSG_DONTWAIT flag in recv and recvfrom.
This flag is needed when using non-zephyr embedded applications with
Zephyr's socket API.
Signed-off-by: Stig Bjørlykke <stig.bjorlykke@nordicsemi.no>
This was previously just a #define in one header file, but we need
this expressed in Kconfig space in case some feature only works
properly with downward-growing stacks.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add new status event indicating an interface has been selected.
Interface and its endpoint(s) are enabled.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
The transfer API provides 'high' level functions to manage sending and
reception of USB data. A USB (class) driver has to register the generic
usb_transfer_ep_callback as endpoint status callback in order to use
the API.
With this API, the class driver does not need to take care of low-level
usb transfer management (packet splitting, ZLP, synchronization...).
The usb_transfer methods will split transfer into multiple transactions
depending endpoint max size and controller capabilities.
Once the transfer is completed, class driver is notified by a callback.
The usb_transfer method can be executed in IRQ/atomic context.
A usb_transfer synchronous helper exists which block-waits until
transfer completion.
In write case, a transfer is complete when all data has been sent.
In read case, a transfer is complete when the exact amount of data
requested has been received or if a short-pkt (including ZLP) is
received.
transfer methods are thread-safe.
A transfer can be cancelled at any time.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Since this function is used on some drivers, and knowing these drivers
can be built for OpenThread, let's make it generic and out of the
802.15.4 L2 stack.
Fixes#5942
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Add console driver that allows console session to be transferred
over a websocket connection.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit creates a websocket library that can be used by
applications. The websocket library implements currently only
server role and it uses services provided by net-app API.
The library supports TLS if enabled in configuration file.
This also adds websocket calls to HTTP app server if websocket
connection is established.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
nRF52840 USBD requires power events to start USB enumeration.
Add APIs to enable/disable the power events, read the USB VBUS detect
and output power ready statuses which can then be used by the USB driver
in the enumeration sequence.
Signed-off-by: Sundar Subramaniyan <sundar.subramaniyan@gmail.com>
The rand driver present in the BLE Link Layer is able to provide
entropy for both threads and ISRs, and so it is more suited to be used
as a generic nRF5x entropy driver instead of the current one. This will
allow applications and the Link Layer to use the same driver without
duplicating it.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
In order to avoid confusion between "Unicode", UTF8, UTF16, UTF32,
and endianess of these encodings, rename all instances of "Unicode"
in the USB subsystem and samples into "UTF16LE".
Signed-off-by: Iván Sánchez Ortega <ivan@sanchezortega.es>
This is a minor change that makes the data pointer const and shifts
the length to a size_t to match the other CRC functions.
Signed-off-by: Michael Hope <mlhx@google.com>
Add support for Virtual File system Switch (VFS) by
introducing mount point concept to Zephyr. This allows
the applications to mount multiple file systems at
different mount points (ex: "/fatfs" and "/nffs"). The
mount point structure contains all the necessary info
required to instantiate, mount and operate on file system.
Decouple applications from directly accessing individual
file systems API's or internal functions by introducing
file system registration mechanism in VFS.
Move the file system defination and mount responsibility
to application so that application can decide which file system
to use and where to mount.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
This commit removes the macros for ARM fault flags from
include/arch/arm/cortex_m/cmsis.h header, since they are
defined in the respective core_cmXX.h header files. It also
modifies fault.c to use the updated fault macros taken directly
from ARM CMSIS headers.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit fixes a bug in the ARM HardFAult handler, which
prevented from dumping the right UsageFault flags, after a
UsageFault had escalated to HardFault.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
net_app_ctx maintains multiple net contexts(net_ctx). But when http
api's wants to reply or send some data, its always choose the first
net_context in the array, which is not correct always.
net_app_get_net_pkt_with_dst() api will select proper context
based on destination address. So with the help of new api in
net_app, http can select proper context and send packets. To
achieve this, desination address is provided in http_recv_cb_t
and http_connect_cb_t callbacks. Also chaged relevant API's to
provide destination address in http message preparation methods.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
It's added in subsys/net/lib/http/http_client.c:http_request():95
after adding the protocol header. If we add 2 CRLF it ends the
header block and causes an HTTP error.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Add HCI error code definitions based on the Bluetooth 5.0 specification.
That allows for example that disconnection reasons can be checked
against the constants.
Signed-off-by: Johannes Hutter <johannes.5494@gmail.com>
During system initialization, the global static variable (to
mem_domain.c) is initialized with the number of maximum partitions per
domain. This variable is of u8_t type.
Assertions throughout the code will check ranges and test for overflow
by relying on implicit type conversion.
Use an u8_t instead of u32_t to avoid doubts. Also, reorder the
k_mem_partition struct to remove the alignment hole created by reducing
sizeof(num_partitions).
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Each bit of "_sys_k_event_logger_mask" corresponds to a
kernel event type. Hence KERNEL_EVENT_TYPE values should be
power of 2. Previous implementation was not adhering
to it ,because of which "sys_k_must_log_event" and
"sys_k_event_logger_set_mask" had unintended effects when
used to mask certain kernel events.
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
This patch removes unused member element from POSIX object attributes
(mutex, condition variable and barrier).
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
This patch provides POSIX sleep APIs for POSIX 1003.1 PSE52 standard.
sleep(n) is implemented using Zephyr k_sleep API.
uleep(n) is implemented using Zephyr k_sleep/k_busy_Wait API.
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
As per POSIX standard typedef should be part of sys/types.h file.
So moving typedef from pthread.h to sys/types.h file.
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
As per IEEE 1003.1 POSIX APIs should return ERROR_CODE on error.
But currently these are returning -ERROR_CODE instead of ERROR_CODE.
So fixing the return value.
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
Duplicate code to query was mistakenly added in commit
2ad7ccdb2d. This code is redundant; the
existing `boot_read_bank_header()` function can read the version from
both image banks.
Signed-off-by: Christopher Collins <ccollins@apache.org>
The Simple Management Protocol (SMP) is a basic protocol that sits on
top of mcumgr's mgmt layer. This commit adds the functionality needed
to hook into mcumgr's SMP layer.
More information about SMP can be found at:
`ext/lib/mgmt/mcumgr/smp/include/smp/smp.h`.
Signed-off-by: Christopher Collins <ccollins@apache.org>
Exposes the operation that MCUboot will perform on the next reboot
(e.g., stay on current image, swap to alternate image, etc.).
Signed-off-by: Christopher Collins <ccollins@apache.org>
The mbedtls test is hitting a compiler bug where two subtests will
soft fail on qemu_xtensa when assertions are enabled. This is despite
the fact that:
+ The failure is entirely internal to the mbedtls suite.
+ The mbedtls code does not use zephyr asserts
+ The mbedtls code does not call into zephyr code that might assert.
+ The behavior persists even when an irq_lock() is held across the
entire test, ruling out any asserts in interrupt/exception context.
+ And EVEN WHEN the mbedtls library blobs are bytewise identical
between assert and non-assert cases.
The bug seems to be a layout thing where the mbedtls code behavior
differently based on code address and/or link-time optimizations
(xtensa has a few).
Unfortunately sanitycheck enables assertions by setting CFLAGS
directly and not via kconfig, so we can't fix this by turning the
feature off in an app right now. This patch adds a simple "override"
flag that can be set by apps like this that hit bugs.
Again, note that zephyr assertions are not used nor needed by this one
test.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
In asm2, the machine exception handler runs in interrupt context (this
is good: it allows us to defer the test against exception type until
after we have done the stack switch and dispatched any true
interrupts), but that means that the user error handler needs to be
invoked and then return through the interrupt exit code.
So the __attribute__(__noreturn__) that it was being decorated with
was incorrect. And actually fatal, as with gcc xtensa will crash
trying to return from a noreturn call.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The scheduler needs a few tweaks to work in SMP mode:
1. The "cache" field just doesn't work. With more than one CPU,
caching the highest priority thread isn't useful as you may need N
of them at any given time before another thread is returned to the
scheduler. You could recalculate it at every change, but that
provides no performance benefit. Remove.
2. The "bitmask" designed to prevent the need to individually check
priorities is likewise dropped. This could work, but in fact on
our only current SMP system and with current K_NUM_PRIOPRITIES
values it provides no real benefit.
3. The individual threads now have a "current cpu" and "active" flag
so that the choice of the next thread to run can correctly skip
threads that are active on other CPUs.
The upshot is that a decent amount of code gets #if'd out, and the new
SMP implementations for _get_highest_ready_prio() and
_get_next_ready_thread() are simpler and smaller, at the expense of
having to drop older optimizations.
Note that scheduler synchronization is unchanged: all scheduler APIs
used to require that an irq_lock() be held, which means that they now
require the global spinlock via the same API. This should be a very
early candidate for lock granularity attention!
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
In SMP mode, the idea of a single "IRQ lock" goes away. Long term,
all usage needs to migrate to spinlocks (which become simple IRQ locks
in the uniprocessor case). For the near term, we can ease the
migration (at the expense of performance) by providing a compatibility
implementation around a single global lock.
Note that one complication is that the older lock was recursive, while
spinlocks will deadlock if you try to lock them twice. So we
implement a simple "count" semantic to handle multiple locks.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Minimal spinlock API based on the existing atomic.h layer. Usage
works just like irq_lock(), but takes an argument to a specific struct
k_spinlock_t to un/lock. No attempt at implementing fairness or
backoff semantics. No attempt made at architecture-specific assembly.
When CONFIG_SMP is not enabled, this code falls back to a zero-size
struct and becomes functionally identical to irq_lock/unlock().
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This is a mostly-internal API to start a secondary system CPU, with an
implementation for the ESP-32 "APP" cpu. Exposed in kernel.h because
it's plausibly useful for asymmetric MP code managed by an app.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The xtensa arch code had this empty offsets.h header sitting around.
Its name collides with the autogenerated offsets.h, making it
dangerously dependent on include file path order. Seems to be benign,
but it's freaking me out. Remove.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The existing __swap() mechanism is too high level for some
applications because of its scheduler-awareness. This introduces a
new _arch_switch() mechanism, which is a simpler primitive that looks
like:
void _arch_switch(void *handle, void **old_handle_out);
The new thread handle (typically just a stack pointer) is specified
explicitly instead of being picked up from the scheduler by
per-architecture code, and on return the "old" thread handle that got
switched out is returned through the pointer.
The new primitive (currently available only on xtensa) is selected
when CONFIG_USE_SWITCH is "y". A new C _Swap() implementation based
on this primitive is then added which operates compatibly.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The new thread stack layout is as follow:
|---------------------|
| user stack |
|---------------------|
| stack guard (opt.) |
|---------------------|
| privilege stack |
-----------------------
For MPUv2
* user stack is aligned to the power of 2 of user stack size
* the stack guard is 2048 bytes
* the default size of privileg stack is 256 bytes.
For user thread, the following MPU regions are needded
* one region for user stack, no need of stack guard for user stack
* one region for stack guard when stack guard is enbaled
* regions for memory domain.
For kernel thread, the stack guard region will be at the top, adn
The user stack and privilege stack will be merged.
MPUv3 is the same as V2's layout, except no need of power of 2
alignment.
* reimplement the user mode enter function. Now it's possible for
kernel thread to drop privileg to user thread.
* add a separate entry for user thread
* bug fixes in the cleanup of regs when go to user mode
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
The application memory area has a requirement of address alignment,
especially when MPU requires power of 2.
Modify the linker tmemplate to apply application memory address
alignment generation
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Enable us bit to check user mode more efficienly.
US is read as zero in user mode. This will allow use mode sleep
instructions, and it enables a form of denial-of-service attack
by putting the processor in sleep mode, but since interrupt
level/mask can't be set from user space that's not worse than
executing a loop without yielding.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
* add the implementation of syscall
* based on 'trap_s' intruction, id = 3
* add the privilege stack
* the privilege stack is allocted with thread stack
* for the kernel thread, the privilege stack is also a
part of thread stack, the start of stack can be configured
as stack guard
* for the user thread, no stack guard, when the user stack is
overflow, it will fall into kernel memory area which requires
kernel privilege, privilege violation will be raised
* modify the linker template and add MPU_ADDR_ALIGN
* add user space corresponding codes in mpu
* the user sp aux reg will be part of thread context
* When user thread is interruptted for the 1st time, the context is
saved in user stack (U bit of IRQ_CTLR is set to 1). When nest
interrupt comes, the context is saved in thread's privilege stack
* the arc_mpu_regions.c is moved to board folder, as it's board
specific
* the above codes have been tested through tests/kernel/mem_protect/
userspace for MPU version 2
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Explicitly show representation peculiarities of the negative values.
Additionally mention that fractional part is in one-millionth parts.
Fixes: #5692
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This patch adjusts the default permissions on the bus master 3 (NET).
Recent changes restricted this to supervisor only, and this caused
issues with the network controllers access to memory.
Restrictions on access should really be enforced on the ARM core bus
master.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
When an __ASSERT() fails compiled for ARCH_POSIX,
instead of spinning forever (probably until sanitycheck times out)
it now terminates immediately and returns 1 to the shell
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Prior to this commit, `flash_area_layout()` was being passed a pointer
to the incorrect type (`uint32_t *` where `int *` was expected). This
caused the following warning to be reported:
```
[...]/subsys/storage/flash_map/flash_map.c: In
function 'flash_area_get_sectors':
[...]/subsys/storage/flash_map/flash_map.c:191:32:
warning: passing argument 2 of 'flash_area_layout' from incompatible
pointer type [-Wincompatible-pointer-types]
return flash_area_layout(idx, cnt, ret, get_sectors_cb, &data);
^~~
[...]/subsys/storage/flash_map/flash_map.c:136:12:
note: expected 'int *' but argument is of type 'uint32_t * {aka long
unsigned int *}'
static int flash_area_layout(int idx, int *cnt, void *ret,
^~~~~~~~~~~~~~~~~
```
This commit changes the argument type to `u32_t` for both functions.
Signed-off-by: Christopher Collins <ccollins@apache.org>
Static variables that don't strictly need to be initialized at
boottime should be declared with __noinit. This makes a considerable
difference especially for large buffers.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
As discovered in https://github.com/zephyrproject-rtos/zephyr/issues/5952
...a duplicate call to k_delayed_work_submit_to_queue() on a work item
whose timeout had expired but which had not yet executed (i.e. it was
pending in the queue for the active work queue thread) would fail,
because the cancellation step wouldn't clear the PENDING bit, causing
the resubmission to see the object in an invalid state. Trivially
fixed by adding a bit clear.
It also turns out that the behavior of the code doesn't match the
docs, which state that a PENDING work item is not supposed to be
cancelled at all. Fix the docs to remove that.
And on yet further review, it turns out that there's no way to make a
test like the one in the linked bug threadsafe. The work queue does
no synchronization by design, so if the user code does no external
synchronization it might very well clobber the running handler. Added
a sentence to the docs to reflect this gotcha.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This patch adds support for userspace on ARM architectures. Arch
specific calls for transitioning threads to user mode, system calls,
and associated handlers.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch adds a configure_mpu_user_context API and implements
the required function placeholders in the NXP and ARM MPU files.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
The STM32 has special Core Coupled Memory, ccm for short, that can
only be accessed through the CPU and can not be use for DMA.
The following 3 sections have been added.
- ccm_bss for zero initialized data
- ccm_data for initialized data
- ccm_noinit for uninitialized data
Signed-off-by: Erwin Rol <erwin@erwinrol.com>
When we added system call support to dma_start/dma_stop we forgot to
include <syscalls/dma.h> to get the full proper magic implemented.
Adding the header in fixes builds when system call support is not
enabled and using dma support.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Difference being that the data is not, then, allocated from the pool.
Only the net_buf is.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Convert the mesh code to use the new net_buf_siple APIs. This has the
benefit of saving 4 bytes off the stack due to the not needed pointer.
Also update the publication context helpers to map to the new
net_buf_simple API in an intuitive way.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Application should normally declare a bt_uuid with proper type and then
use bt_uuid_cmp.
Fixes#5162
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
As per current policy of requiring supervisor mode to register
callbacks, dma_config() is omitted.
A note added about checking the channel ID for start/stop, current
implementations already do this but best make it explicitly
documented.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This feature is X86 only and is not used or being tested. It is legacy
feature and no one can prove it actually works. Remove it until we have
proper documentation and samples and multi architecture support.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Make it safe to call net_buf_simple_init() even if the buffer was
created using the new macros. This is possible to detect since with
the new macros buf->__buf will be non-NULL and with the old
NET_BUF_SIMPLE() macro it will be NULL.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Added guards to the toolchain/gcc.h and toolchain/common.h
Those files should never be included directly, but a guard is useful
regardless.
Fixes#5130
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Introduce two new "standard" data allocators to net_buf. There are now
three in total:
NET_BUF_POOL_FIXED_DEFINE: This is the closes to the old
implementation, i.e. fixed size chunks. It's also what the old
NET_BUF_POOL_DEFINE macro maps to.
NET_BUF_POOL_HEAP_DEFINE: uses the OS heap
NET_BUF_POOL_VAR_DEFINE: defines a variable sized allocator using
k_mem_pool (this is all that there was in my first draft of this
feature)
Currently the variable length allocators (HEAP & VAR) support
reference counted data payloads, i.e. cheap cloning. The FIXED
allocator does not currentlty support this to allow for the simplest
possible implementation, but the support can be added later if
desired.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Redesign of the net_buf_simple and net_buf structs, where the data
payload portion is split to a separately allocated chunk of memory. In
practice this means that buf->__buf becomes a pointer from having just
been a marker (empty array) for where the payload begins right after
the meta-data.
Fixes#3283
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Added a new API to get net pkt based on dst address. Destination
address will be used to find correct net_context.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This commit defines the Kconfig options for
ARM Cortex-M23 and Cortex-M33 CPUs. It also
udpates the generic memory map for M23 and M33
implementations.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This PR includes the required changes in order to support
conditional compilation for Armv8-M architecture. Two
variants of the Armv8-M architecture are defined:
- the Armv8-M Baseline (backwards compatible with ARMv6-M),
- the Armv8-M Mainline (backwards compatible with ARMv7-M).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The existing version of crc16_ccitt() is actually CRC-16/AUG-CCITT and
gives different results to Linux, Contiki, and the CRC unit in the
SAM0 SOC. This version matches Linux.
Note that this is an incompatible API change.
Signed-off-by: Michael Hope <mlhx@google.com>
It is faster to operate directly on flash_area pointer instead
of fetch it all the time using the fcb flash area id.
Also as f_area_id was needed only for get appropriate flash_area
pointer, so it is better to pass it only while initialization
the fcb and not store it in fcb instance data at all.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Previously flash_area structure was the parameter for the callback
function for transferring sector location info.
Now flash_sector is used so relevant flash_area is missing for
the callback.
This patch introduces structure fcb_entry_ctx which incorporates
entries' location and relevant flash area. It is used to pass complete
information to the callback. Additional pointer to the flash_area fcb
speeds up operations.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Prior to this commit: `struct fcb` contained a pointer to an array of
`struct flash_area`. Each entry in the array represented a flash sector
that the fcb comprised.
After commit: `struct fcb` contains a pointer to an array of `struct
flash_sector`, not `struct flash_area`.
Rationale: The FCB needs to know which sectors it occupies for its
rotate operation. However, the `flash_area` type is meant to represent
a collection of sectors, not a single sector. `struct flash_area`
contains information that the fcb does not need (e.g., area ID and
device ID). Furthermore, the flash_map API provides a means of
converting a flash area ID to an array of sectors
(`flash_area_get_sectors()`), but no way to convert to an array of
areas.
Signed-off-by: Christopher Collins <ccollins@apache.org>
This patch adds the generation and incorporation of privileged stack
regions that are used by ARM user mode threads. This patch adds the
infrastructure for privileged stacks. Later patches will utilize the
generated stacks and helper functions.
Signed-off-by: Chunlin Han <chunlin.han@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch adds application data section alignment constraints
to match the region definition requirements for ARM MPUs. Most MPUs
require a minimum of 32 bytes of alignment for any regions, but some
require power of two alignment to the size of a region.
This requires that the linker align the application data section to
the size of the section. This requires a linker pass to determine the
size. Once this is accomplished the correct value is added to a linker
include file that is utilized in subsequent linker operations.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
CCS811 digital gas sensor supports the following channels:
1. Co2 Channel
2. VOC Channel
3. Voltage Channel
4. Current Channel
Add support for the those in API.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Most of sensor channels defined by Zephyr use the main, unscaled
SI unit. We also have SENSOR_CHAN_ALTITUDE which is defined in
meters. So, it only makes sense to define distance in meters too
The only driver supporting SENSOR_CHAN_DISTANCE as of now is
vl53l0x.c, which was updated accordingly. Also, update doc links
in the driver based on the review comment.
Fixes: #5693
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This is an accessor function for the MCUboot image header of an image
bank. The interface may seem a little cumbersome, but it is
future-proof against MCUboot feature and incompatible header version
changes.
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
Applications chainloaded by MCUboot may want to change their behavior
based on whether or not they are confirmed.
Here are some examples:
- performing a built-in self test (BIST) if the image is not yet
confirmed, and marking it OK if it passes (this enables reverting
to an older working image if the BIST fails, and allows future
resets to skip the BIST if it passes to improve boot time)
- interacting with persistent metadata related to image state on
other flash partitions during test upgrades (these are required in
cases when the update source provides runtime metadata, such as
monotonic counters, related to an upgrade attempt which must be
used to report results)
To enable these use cases, add boot_is_img_confirmed(), which reads
the "image OK" field for the current firmware image and returns true
if and only if it is set.
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
This patch does several things, most notably it changes the semantics
of CONFIG_DEBUG. CONFIG_DEBUG continues to behave as a vaguely defined
"debug mode" that enables printf's, -Og, etc. but now the user may
choose to be in "debug mode" while using a different optimization
level than -Og.
Tp support this a new config is defined to enable -Og;
CONFIG_DEBUG_OPTIMIZATIONS.
Additionally CONFIG_SIZE_OPTIMIZATIONS is introduced to allow the user
to explicitly request optimizing for size instead of relying on
defaulting to it.
The three config's {NO,SIZE,DEBUG}_OPTIMIZATIONS are now organized in
a Kconfig choice to ensure that at most one can be enabled at a time.
Finally, selected users of CONFIG_DEBUG have been ported to use one of
the optimizations configs when it was clear from usage that the
intention was to behave differently when using a different
optimization level and not when in "debug mode".
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Based on the discussion in #5693, the reason why humidity was defined
in milli-percent was likely following Linux which defines it as such
in its sensor subsystem:
http://elixir.free-electrons.com/linux/latest/source/Documentation/ABI/testing/sysfs-bus-iio#L263
However, Linux defines temperature in milli-degrees either, but
Zephyr uses degrees (similarly for most other quantities). Typical
sensor resolution/precision for humidity is also on the order of 1%.
One of the existing drivers, th02.c, already returned values in
percents, and few apps showed it without conversion and/or units,
leading to confusing output to user like "54500".
So, switching units to percents, and update all the drivers and
sample apps.
For few drivers, there was also optimized conversion arithmetics
to avoid u64_t operations. (There're probably more places to
optimize it, and temperature conversion could use such optimization
too, but that's left for another patch.)
Fixes: #5693
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Until now the OOB info and URI fields in unprovisioned beacons were
generally ignored by the implementation. Add fields for these to
bt_mesh_prov and make sure to take them into account when encoding
advertising data, both for PB-ADV and PB-GATT. For PB-ADV the URI goes
out in a separate beacon, whereas for PB-GATT it is placed in the scan
response data.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Be consistent with the style of always having braces even if a compound
statement isn't required. Avoids some warnings from static analysis
tools.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Now the native console driver also handles stdin
so we can drive the shell from the command line,
a pipe or a file
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Provided separate event information structs based on events. This way
user will know what kind of information will be received to that
particular event.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Introduce CONFIG_NET_ROUTING option that allows the IP stack
to route IPv6 packets between multiple network interfaces.
No support for IPv4 routing is implemented by this commit.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The argument is a u32_t which limits the maximum disk size to 4 GiB.
Rather than fix this, delete the ioctl and switch the only use to
GET_SECTOR_COUNT instead.
Signed-off-by: Michael Hope <mlhx@google.com>
Previously, POSIX function names were aliased to zsock_ function
names using, for example:
#define connect zsock_connect
This caused the C preprocessor to replace any symbol named 'connect',
whether a function or not, in all source code which included socket.h,
with 'zsock_connect'. This generated unintended code where the symbol
'connect' was used as the name of a structure field (as in mqtt.h).
This new inline definition is applied to all the POSIX function symbols,
with the exception of fcntl, a redefinition of which would conflict
with the definiton in the toolchain's fcntl.h.
Fixes#5817
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Use CONFIG_IEEE802154 instead of CONFIG_NET_L2_IEEE802154
and CONFIG_IEEE802154_RAW_MODE when adding RSSI and LQI
members to net_pkt. CONFIG_IEEE802154 is selected when
at least one 15.4 device is selected (L2 or RAW).
Signed-off-by: Kamil Sroka <kamil.sroka@nordicsemi.no>
De-referencing the pointer from net_buf_user_data(buf) as a pointer to
an enum causes issues on qemu_x86 because the true size is 8-bit, but
the enum is 32-bit on qemu_x86. So we put in a temporary cast to 8-bit
to ensure only 8 bits are read from the pointer.
This fixes a regression from d3304dc508
that broke BT on qemu_x86.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
For SoCs that don't support vector table relocation in hardware, may not
support bootloader like mcuboot.
We introduce a way to relocate vector table in software by forwarding
the control of incoming IRQs to a new vector table which address is save
at fixed SRAM address.
User can change the data in that fixed SRAM address in order to relocate
vector table in software way.
Signed-off-by: Ding Tao <miyatsu@qq.com>
Add a distance channel in the sensor interface to be used with
time Of flight sensors (vl53l0X for example).This will indicate
the distance from the sensor to the target, in millimeters.
Signed-off-by: Vincent Veron <vincent.veron@st.com>
The meaning of this address type is the same as NET_ADDR_MANUAL,
but with a provision that DHCP can override such an address.
It's intended for the usecase when there's a default static
configuration for when DHCP is not available, but DHCP should
override it.
Before going to add another address type, there was an attempt
to repurpose TENTATIVE address state, but it doesn't work as
expected, as indeed, all existing address types/states already
have clearly semantics, and it makes sense to just another
address type to avoid confusion and unexpected behavior.
Fixes: #5696
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The library has incomplete tracing support. Given that we are not a true
kernel object, remove support instead of fixing it.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Refering the ARM's implementation, the initial support of memory
domain in ARC is added:
* changes in MPU drivers
* changes in Kconfig
* codes to configure memory domain during thread swap
* changes in linker script template
* memory domain related macro definitions
the commited codes are simply tested through
samples/mpu/mem_domain_apis_test.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
In some cases, we need to initialize DNS servers from a binary
addresses, e.g. in case of DHCP processing. With existing API,
such addresses would need to be converted to strings, just to
be converted back to struct sockaddr in dns_resolve_init().
This is not efficient, and with a number of addresses quite
cumbersome. So instead, allow to pass DNS server either as
strings, or as struct sockaddr's (or both).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The _vector_start was placed before the CONFIG_TEXT_SECTION_OFFSET, thus
adding the offset in the relocated vector table, making the table
invalid when relocated with a non null CONFIG_TEXT_SECTION_OFFSET.
This was tested using MCUboot with a 0x200 offset for the image header.
Fixes: eb48a0a73c ("arm: armv6-m: Support relocating vector table")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
The offset of the IP header in a received packet depends on the L2
header size. For Ethernet this is 14 bytes which puts the u32 IPv4
addresses on a non-u32 byte boundary. This causes chips that don't
support unaligned access (like the Cortex-M0) to fault.
The fixes in this patch are enough to ping the board and run the
http_server sample.
Signed-off-by: Michael Hope <mlhx@google.com>
Document USB Vendor and Product IDs and their intended usage.
Set the Vendor and Product IDs and define the USB bcdDevice
Device Descriptor Device Release Number to be the binary
coded decimal representation of the Zephyr major and minor
kernel version number.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Moved fetch of flash device bindings to early initialization of the
application.
Device bindings are constant while the application is running so
it is better to fetch it at startup, and not every time flash_map
procedures are called.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Zephyr already supports NFFS as a storage layer, but it might
be a little bit too heavyweight for certain applications in
memory-restricted ICs.
This module is response for need of Lightweight flash storage
capability. FCB is ported form MyNewt as native zephyr module.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Introduce flas_map module is abstraction over flash memory and its
driver for using flash memories along with description of
available flash areas.
Module provides simple API for write/read/erase and so one.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
CC1200 is a sub-ghz chip supporting 6 ISM & SRD bands: 169, 433, 470,
868, 915 and 920 MHz, with features dedicated to IEEE 802.15.4(g).
Current driver enables CC1200 against actual IEEE 802.15.4 Soft-MAC. 'g'
version support in the Soft-MAC will follow later.
The chip itself is closer to a bare metal radio modem than to a usual
15.4 chip: up to the user to provide the right RF settings for the
carrier band. Such settings can be generaten through TI's SmartRF tool.
Hopefully, for channel selection, this driver will be clever enough to
compute the proper register change without any special input from the
user. This will work for all the bands supported by the chip.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It will be up to the user to configure a valid channel, through
net_mgmt, and call net_if_up() in order to get the device up.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Sub-Ghz bands have different limit of channels. 10, or more than a
thousand is actually possible. Thus the device needs to expose such
limit to the L2 which is unaware of frequency band logic. L2 will
then allow user to select a proper channel.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The k_mem_pool_free API has no use for the full k_mem_block struct. In
particular, it only needs the k_mem_block_id. Introduce a new API
which takes only this essential struct. This paves the way to
simplify & improve the k_malloc/k_free implementation a bit.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The function returns an enum, not a u8_t, so we should cast
appropriately to avoid an implicit conversion.
This construct was triggering this compilation error when compiling
with CXX:
/home/sebo/zephyr/include/bluetooth/buf.h:85:9: error: invalid
conversion from ‘u8_t {aka unsigned char}’ to ‘bt_buf_type’
[-fpermissive] return *(u8_t *)net_buf_user_data(buf);
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Compiling this declaration with a CXX compiler triggers the compiler
error:
/home/sebo/zephyr/include/bluetooth/gatt.h:898:10: error: ‘struct
bt_gatt_read_params::<anonymous union>::__single’ invalid; an
anonymous union can only have non-static data members [-fpermissive]
Reading up on the standard, I was unable to find any mention of this
being valid C or CXX code (But reading the standard is not
straightforward). And I was unable to find any mechanism to make the
CXX compiler accept it (e.g. Changing the -std, or adding this as a
language extension e.g. -fms-extensions).
So we rewrite it to not declare the struct with the tag
"__single". There does not seem to be any reason for it to be declared
like this.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Fix build break when enabling CONFIG_HTTPS w/o CONFIG_NET_APP_SERVER
This error can be seen when building sample/net/http_client like so:
$ cd samples/net/http_client
$ mkdir build && cd build
$ cmake -DBOARD=qemu_x86 -DCONF_FILE=prj_tls.conf ..
$ make run
In file included from
/home/<user>/zephyr/include/net/http.h:11:0,
from /home/<user>/zephyr/samples/net/http_client/src/main.c:19:
/home/<user>/zephyr/include/net/http_app.h:643:11: error: unknown type
name ‘net_app_cert_cb_t’
net_app_cert_cb_t cert_cb,
^~~~~~~~~~~~~~~~~
CMakeFiles/app.dir/build.make:302: recipe for target
'CMakeFiles/app.dir/src/main.c.obj' failed
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
This was failing with compiler warnings. Looks like latest compilers
enable warnings by default that we do not have in the current SDK.
This was failing with unit tests being built natively.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Features received in Config Heartbeat Publication Set message can have
Feature bits set to RFU values.
This patch fixes setting this RFU bits in Heartbeat Publication
Features, so that those are not indicated in Config Heartbeat
Publication Status message.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
The linker script places kernelspace and userspace archives in
different sections. But the linker script itself does not determine
what archives are in what space, that is done by CMake.
CMake passes the list of kernelspace archives to the linker script
through defines, like this:
-DNUM_KERNEL_OBJECT_FILES=3
-DKERNEL_OBJECT_FILE_0=path/to/archive_a.a
-DKERNEL_OBJECT_FILE_1=path/to/archive_b.a
-DKERNEL_OBJECT_FILE_2=path/to/archive_c.a
These paths are relative, and since Ninja and Make invoke the linker
with different "working directories"[0], the relative paths need to be
different. This patch rectifies the relative path when using Ninja.
This fixes#5343
[0] https://gitlab.kitware.com/cmake/cmake/issues/17448
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
This adds commands to manage Friend node Subscription List.
Those will be used to add or remove and group/virtual address
from subscription list.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This command will be used to test if model can properly send
segmented and unsegmented messages to a given destination address.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Of these, only struct net_ipv6_nbr_data::send_ns is a descriptive
change:
send_ns is used for timing Neighbor Solicitations in general, not
just for DAD.
The rest are typo/grammar fixes.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
A new arch (posix) which relies on pthreads to emulate the context
switching
A new soc for it (inf_clock) which emulates a CPU running at an
infinely high clock (so when the CPU is awaken it runs till completion
in 0 time)
A new board, which provides a trivial system tick timer and
irq generation.
Origin: Original
Fixes#1891
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Having posix headers in the default include path causes issues with the
posix port. Move to a sub-directory to avoid any conflicts.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add an architecure specfic code for the memory domain
configuration. This is needed to support a memory domain API
k_mem_domain_add_thread.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
- Add needed settings for DTLS support to the lwm2m_ctx structure.
- Add initialization of MBEDTLS to the LwM2M lib based on the
user application settings in lwm2m_ctx.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
MPU version 3 is included in em7d of em_starterkit 2.3.
The differences of MPU version 3 and version 2 are:
* different aux reg interface
* The address alignment requirement is 32 bytes
* supports secure mode
* supports SID (option)
* does not support memory region overlap
This commit adds the support MPU version 3 and also make some changes to
MPU version 2 to have an unified interface.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
In ARC's SecureShield, a new secure mode (currently only em) is added.
The secure/normal mode is orthogonal to kernel/user mode. The
differences between secure mode and normal mode are following:
* different irq stack frame. so need to change the definition of
_irq_stack_frame, assembly code.
* new aux regs, e.g, secure status(SEC_STAT), secure vector base
(VECT_BASE_S)
* interrupts and exceptions, secure mode has its own vector base;
interrupt can be configured as secure or normal through the
interrupt priority aux reg.
* secure timers. Two secure timers (secure timer 0 and timer 1) are
added.Here, for simplicity and backwards compatibility original
internal timers (timer 0 and timer1) are used as sys clock of zephyr
* on reset, the processor is in secure mode and secure vector base is
used.
Note: the mix of secure and normal mode is not supported, i.e. it's
assumed that the processor is always in secure mode.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
This will avoid exposing IEEE 802.15.4 Zephyr's L2 private context data
to unrelevant places.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
L2 specific data and IEEE 802154 net mgmt interface are not related.
Plus, application may use the net mgmt part, not the L2 one. So let's
split the content in relevant headers.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
IPv6 mcast addr to MAC mcast conversion was factored out to
subsys/net/ip/l2/ethernet.c for reuse by other drivers.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
We have removed this features when we moved to the unified kernel. Those
functions existed to support migration from the old kernel and can go
now.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add configuration client model support for NetKey Add message, as well
as a mesh shell command for calling the new API.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Some API material (from doxygen comments) wasn't included in the
generated documentation because there was no doxygengroup Sphinx
directive to display them. This PR add content into appropriate places
in existing documentation (e.g., Bluetooth Cryptography APIs into the
Bluetooth API doc) and creates two new collections for Display and
Miscellaneous APIs.
Comments added to the .rst files to mention doxygengroups that are
intentionally excluded (because they're organizational groups containing
subgroups that are included).
Sorted the Bluetooth API list, mostly.
Fixed a couple doxygen group titles defined in the include files, and
added a few patterns to filter new "expected" errors from the document
generation process.
Legacy and deprecated APIs remain left out, as intended:
http_legacy (net/http_legacy.h)
spi_interface_legacy (spi_legacy.h)
zoap (net/zoap.h)
fixes: Issue #5051
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Remove references to k_mem_pool_defrag and any related bits associated
with mem_pool defrag that don't make sense anymore.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Define _image_rodata_start/end to match x86 and so that we can
refer to them in the userspace test among others.
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
This patch makes minor improvements to the flash documentation:
* spi -> SPI
* Capitialise the first word in a sentance
* Adding the, and, all, etc where appropriate.
Signed-off-by: Michael Hope <mlhx@google.com>
This makes it possible to pass all IV Update tests without having to
build a custom configuration for some of the tests. We also disable
the feature in all sample configurations, but leave it on in the
tests.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add support for sending messages that add, delete or overwrite Label
UUIDs, and add commands for these to the shell. With the help of these
commands it's possible to pass Transport Layer PTS tests (in
particular TNPT/BV-05-C) by manually adding a Label UUID through
module subscription, since the test case itself does not do this.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Compute the length of the TX payload that is transported in one
IPv4 or IPv6 datagram taking into account UDP, ICMP or TCP
headers in addition to any IPv6 extension headers added by RPL.
The TCP implementation in Zephyr is known to currently carry at
maximum 8 bytes of options. If the protocol is not known to the
stack, assume that the application handles any protocol headers
as well as the data. Also, if the net_pkt does not have a
context associated, length check on the data is omitted when
appending.
Although payload length is calculated also for TCP, the TCP MSS
value is used as before.
Define IPv4 minimum MTU as 576 octets, See RFC 791, Sections 3.1.
and 3.2.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Many apps, the mesh shell included (due to PTS test requirements)
benefit from exposing LPN state and polling outside of the stack.
Introduce new APIs for these, and add code to the mesh shell module to
take advantage of them.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add support for sending Health Attention messages, as well as commands
to use these new APIs from the shell.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add support for sending Health Period messages, as well as commands to
use these new APIs from the shell.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add a callback to the Health Client Model context, so that the
application is able to receive Health Current Status messages that
some Health Server Model publishes.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add the needed Health Client API for sending Health Fault Get, and add
a command to the shell to utilize it.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
- Renaming NET_L2_RAW_CHANNEL to NET_RAW_MODE
- Create a generic IEEE 802.15.4 raw mode for drivers
- Modify the IEEE 802.15.4 drivers so it passes the packet unmodified,
up to code using that mode to apply the necessary changes on the
received net_pkt according to their needs
- Modify wpanusb/wpan_serial relevantly
Fixes#5004
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
After the Publish Retransmit state was introduced the Publish Period
measurement would begin once the previous Publish message has finished
transmitting. This will however cause inaccurate periods, which is
particularly an issue with the PTS that expects accuracy of less than
0.5 seconds (apparently).
Since the publication timer is also used for the retransmissions we
can't simultaneously use if for the period as well. Therefore, we
introduce a new variable called period_start which makes a note of
when the period was supposed to start, and then once all
retransmissoins are done initializes the timer with the send duration
taken into account.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The only generally available model supporting publication that's
convenient to be used for testing is the Health Server Model.
Unfortunately since this model supports period publication, the
non-periodic side got less attention and had some bugs.
The first thing that needs to be done is to verify that the period
returned by bt_mesh_model_pub_period_get() is positive. If it's zero
then no periodic publication should take place.
Another thing that this patch cleans up is the naming of the callback
used for periodic publishing. There's no need do require the callback
to call bt_mesh_model_publish() since this must happen no matter what,
so instead rename the callback from 'func' to 'update' and have the
access layer call bt_mesh_model_publish() if the callback was
successful.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In case K_POLL_STATE_NOT_READY is set the return will be set to -EINTR
indicating that the poll was interrupted.
Fixes#5026
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The Del and Overwrite operations have the exact same parameters and
expected status response as the Add operation, so we can reuse most of
the code.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Model publication was broken in a couple of ways:
- The Publish Retransmit State was not taken into account at all
- Health Server used a single publish state for all elements
To implement Publish Retransmit properly, one has to use a callback to
track when the message has been sent. The problem with the transport
layer sending APIs was that giving a callback would cause the
transport layer to assume that segmentation (with acks) is desired,
which is not the case for Model Publication (unless the message itself
is too large, of course). Because of this, the message sending context
receives a new send_rel ("Send Reliable") boolean member that an app
can use to force reliable sending.
Another challenge with the Publish Retransmit state is that a buffer
is needed for storing the AppKey-encrypted SDU once it has been sent
out for the first time.To solve this, a new new net_buf_simple member
is added to the model publication context. The separate 'msg' input
parameter of the bt_mesh_model_publish() API is removed, since the
application is now expected to pre-fill pub->msg instead.
To help with the publishing API change, the Health Server model gets a
new helper macro for initializing the publishing context with a
right-sized publishing message.
The API for creating Health Server instances is also redesigned since
it was so far using a single model publishing state, which would
result in erratic behavior in case of multiple elements with the
Health Server Model. Now, the application needs to provide a unique
publishing context for each Health Server instance.
The changes are heavily intertwined, so it's not easily possible to
split them into multiple patches, hence the large(ish) patch.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The Model Publish Retransmit Interval is in units of 50ms and not 10ms
like the other transmit/retransmit states. Create dedicated macros for
the Publish Retransmit State and use them where appropriate.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There's no need for callback exposed in the public API to be something
different than what's used internally. In fact this would just
complicate things. This patch exposes the internal callback under a
bt_mesh_adv_cb name and uses it throughout the mesh stack.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add in6addr_any and in6addr_loopback which are defined in RFC2553 Basic
Socket Interface Extensions for IPv6.
Signed-off-by: Aska Wu <aska.wu@linaro.org>
Implement API to validate user buffer. This API will iterate
all MPU regions to check if the given buffer is user accessible
or not. For #3832.
Signed-off-by: Chunlin Han <chunlin.han@linaro.org>
This simplifies the API since there is no-longer a need to pass a huge
number of function arguments around.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This simplifies the API since there is no-longer a need to pass a huge
number of function arguments around.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This is a temporary hack until #5006 is resolved (possibly using
https://github.com/zephyrproject-rtos/zephyr/issues/5006
Unit testing (BOARD == unit_testing) doesn't need the system call
definitions. Because we foward declare with __syscall them as "static
inline" (from common.h), the compilers will complain that the
definition is missing.
Change to only define __syscall as "static inline" if we are not
builing a unit test to avoid said warnings.
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
The Doxygen comments for the flash API refer to page and sector
interchangeably, without defining either. Fix the coments by providing
a definition of page and using that word consistently.
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
10 seconds is quite long for configuration messages, and way too much
currently since we only talk through the local networking interface.
Set the default timeout to 2 seconds, and provide APIs through which
the timeout may be changed at run-time (mainly useful for the shell).
Note: The timeout_set() API is normally assumed to be called just once
for an application, based on the expected size of the network (hops &
latency). Trying to change it e.g. in a multi-threaded environment for
every message may not yield the expected results.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
It may be useful for the app to know what the initial NetKeyIndex that
it was given during provisioning is.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This is in anticipation of soon adding health client support, which
could then cause confusion due to the ambiguous API names.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Now that there's support for configuration client as well, rename cfg
to cfg_srv to avoid any confusion.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add the ability to track the provisioning bearer through an extra
parameter to link_open/close. Also introduce new public functions to
enable/disable specific provisioning bearers. This also means that one
now needs to explicitly enable provisioning bearers after calling
bt_mesh_init().
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The command name and a shortened form of valid parameters is not
necessarily enough to understand its usage. Add the option of
providing a more lengthy description of the command usage.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This function wasn't working on systems that enabled the stack
sentinel as the first 4 bytes of the stack buffer contain the
sentinel value for thread stacks.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The new mem pool implementation has a hard minimum block size of 8
bytes, but the macros to statically compute the number of levels
didn't clamp, leading to invalid small allocations being allowed,
which would then corrupt the list pointers of nearby blocks and/or
overflow the buffer entirely and corrupt other memory.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Add support to the Configuration Client Model for getting and setting
1-byte states (which can be nicely generalized in code) as well as the
2-byte Relay state.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
As the number of mesh APIs grows it becomes a bit cumbersome to have
everything in a single header file. Split the mesh.h header file into
multiple files in a new mesh subdirectory, and include the new headers
from the old one to retain backwards compatibility and simplicity for
apps (they only need to include <bluetooth/mesh.h>).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In http_request() a CRLF is added to the header information after
the protocol is added. 2 CRLF in a row means the header information
is done, so following header information will be ignored.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Add status error string when sending a error message from
HTTP server to client as described in RFC 2616 ch 6.1.
Previously only error code was sent except for 400 (Bad Request).
This also fixes uninitialized memory access in error message.
Coverity-CID: 178792
Fixes#4782
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Avoid applications defining empty model arrays by themselves by
documenting the BT_MESH_MODEL_NONE helper macro (renamed to be more
intuitive) and using it in the mesh sample app.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
It may be useful for the app to know when the provisioning link is
active and when it has been closed. This can be used e.g. to signal
the user the state of the device. Some PTS tests also require
verifying the link state.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The only messages that should be encrypted using the friendship
credentials are those coming through the Friend Queue on the Friend
node, most request-response pairs between LPN & Friend (exceptions are
Friend Request - Friend Offer, and Friend Clear - Friend Clear
Confirm), as well as Model Publication messages when the Friendship
Credentials Flag has been enabled in the model publication.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When sending a packet with AR flag set, the ACK frame that should be
replied to it must holp the same sequence number, so let's verify this
properly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Added architecture specific support for memory domain destroy
and remove partition for arm and nxp. An optimized version of
remove partition was also added.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
This is intended for memory-constrained systems and will save
4K per thread, since we will no longer reserve room for or
activate a kernel stack guard page.
If CONFIG_USERSPACE is enabled, stack overflows will still be
caught in some situations:
1) User mode threads overflowing stack, since it crashes into the
kernel stack page
2) Supervisor mode threads overflowing stack, since the kernel
stack page is marked non-present for non-user threads
Stack overflows will not be caught:
1) When handling a system call
2) When the interrupt stack overflows
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Besides the fact that we did not have that for the current supported
boards, that makes sense for this new, virtualized mode, that is meant
to be run on top of full-fledged x86 64 CPUs.
By having xAPIC mode access only, Jailhouse has to intercept those MMIO
reads and writes, in order to examine what they do and arbitrate if it's
safe or not (e.g. not all values are accepted to ICR register). This
means that we can't run away from having a VM-exit event for each and
every access to APIC memory region and this impacts the latency the
guest OS observes over bare metal a lot.
When in x2APIC mode, Jailhouse does not require VM-exits for MSR
accesses other that writes to the ICR register, so the latency the guest
observes is reduced to almost zero.
Here are some outputs of the the command line
$ sudo ./tools/jailhouse cell stats tiny-demo
on a Jailhouse's root cell console, for one of the Zephyr demos using
LOAPIC timers, left for a couple of seconds:
Statistics for tiny-demo cell (x2APIC root, x2APIC inmate)
COUNTER SUM PER SEC
vmexits_total 7 0
vmexits_management 3 0
vmexits_cr 2 0
vmexits_cpuid 1 0
vmexits_msr 1 0
vmexits_exception 0 0
vmexits_hypercall 0 0
vmexits_mmio 0 0
vmexits_pio 0 0
vmexits_xapic 0 0
vmexits_xsetbv 0 0
Statistics for tiny-demo cell (xAPIC root, xAPIC inmate)
COUNTER SUM PER SEC
vmexits_total 4087 40
vmexits_xapic 4080 40
vmexits_management 3 0
vmexits_cr 2 0
vmexits_cpuid 1 0
vmexits_msr 1 0
vmexits_exception 0 0
vmexits_hypercall 0 0
vmexits_mmio 0 0
vmexits_pio 0 0
vmexits_xsetbv 0 0
Statistics for tiny-demo cell (xAPIC root, x2APIC inmate)
COUNTER SUM PER SEC
vmexits_total 4087 40
vmexits_msr 4080 40
vmexits_management 3 0
vmexits_cr 2 0
vmexits_cpuid 1 0
vmexits_exception 0 0
vmexits_hypercall 0 0
vmexits_mmio 0 0
vmexits_pio 0 0
vmexits_xapic 0 0
vmexits_xsetbv 0 0
See that under x2APIC mode on both Jailhouse/root-cell and guest, the
interruptions from the hypervisor are minimal. That is not the case when
Jailhouse is on xAPIC mode, though. Note also that, as a plus, x2APIC
accesses on the guest will map to xAPIC MMIO on the hypervisor just
fine.
Signed-off-by: Gustavo Lima Chaves <gustavo.lima.chaves@intel.com>
This is an introductory port for Zephyr to be run as a Jailhouse
hypervisor[1]'s "inmate cell", on x86 64-bit CPUs (running on 32-bit
mode). This was tested with their "tiny-demo" inmate demo cell
configuration, which takes one of the CPUs of the QEMU-VM root cell
config, along with some RAM and serial controller access (it will even
do nice things like reserving some L3 cache for it via Intel CAT) and
Zephyr samples:
- hello_world
- philosophers
- synchronization
The final binary receives an additional boot sequence preamble that
conforms to Jailhouse's expectations (starts at 0x0 in real mode). It
will put the processor in 32-bit protected mode and then proceed to
Zephyr's __start function.
Testing it is just a matter of:
$ mmake -C samples/<sample_dir> BOARD=x86_jailhouse JAILHOUSE_QEMU_IMG_FILE=<path_to_image.qcow2> run
$ sudo insmod <path to jailhouse.ko>
$ sudo jailhouse enable <path to configs/qemu-x86.cell>
$ sudo jailhouse cell create <path to configs/tiny-demo.cell>
$ sudo mount -t 9p -o trans/virtio host /mnt
$ sudo jailhouse cell load tiny-demo /mnt/zephyr.bin
$ sudo jailhouse cell start tiny-demo
$ sudo jailhouse cell destroy tiny-demo
$ sudo jailhouse disable
$ sudo rmmod jailhouse
For the hello_world demo case, one should then get QEMU's serial port
output similar to:
"""
Created cell "tiny-demo"
Page pool usage after cell creation: mem 275/1480, remap 65607/131072
Cell "tiny-demo" can be loaded
CPU 3 received SIPI, vector 100
Started cell "tiny-demo"
***** BOOTING ZEPHYR OS v1.9.0 - BUILD: Sep 12 2017 20:03:22 *****
Hello World! x86
"""
Note that the Jailhouse's root cell *has to be started in xAPIC
mode* (kernel command line argument 'nox2apic') in order for this to
work. x2APIC support and its reasoning will come on a separate commit.
As a reminder, the make run target introduced for x86_jailhouse board
involves a root cell image with Jailhouse in it, to be launched and then
partitioned (with >= 2 64-bit CPUs in it).
Inmate cell configs with no JAILHOUSE_CELL_PASSIVE_COMMREG flag
set (e.g. apic-demo one) would need extra code in Zephyr to deal with
cell shutdown command responses from the hypervisor.
You may want to fine tune CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC for your
specific CPU—there is no detection from Zephyr with regard to that.
Other config differences from pristine QEMU defaults worth of mention
are:
- there is no HPET when running as Jailhouse guest. We use the LOAPIC
timer, instead
- there is no PIC_DISABLE, because there is no 8259A PIC when running
as a Jailhouse guest
- XIP makes no sense also when running as Jailhouse guest, and both
PHYS_RAM_ADDR/PHYS_LOAD_ADD are set to zero, what tiny-demo cell
config is set to
This opens up new possibilities for Zephyr, so that usages beyond just
MCUs come to the table. I see special demand coming from
functional-safety related use cases on industry, automotive, etc.
[1] https://github.com/siemens/jailhouse
Reference to Jailhouse's booting preamble code:
Origin: Jailhouse
License: BSD 2-Clause
URL: https://github.com/siemens/jailhouse
commit: 607251b44397666a3cbbf859d784dccf20aba016
Purpose: Dual-licensing of inmate lib code
Maintained-by: Zephyr
Signed-off-by: Gustavo Lima Chaves <gustavo.lima.chaves@intel.com>
The old HTTP server and client library code is deprecated. The
new HTTP library will be based on net-app API code which requires
changes to function names and parameters that are not compatible
with old library.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Create http library that uses net-app instead of net_context
directly. The old HTTP API is deprecated.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Now that net_buf has "native" support for sys_slist_t in the form of
the sys_snode_t member, there's a danger people will forget to clear
out buf->frags when getting buffers from a list directly with
sys_slist_get(). This is analogous to the reason why we have
net_buf_get/put APIs instead of using k_fifo_get/put.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Rename net_pkt_get_src_addr() to net_pkt_get_addr() and make it able to
handle source or destination address.
Signed-off-by: Aska Wu <aska.wu@linaro.org>
Add support for loading IRKs into the controller as well as the LE
Enhanced Connection Complete HCI event. To simplify things, the old LE
Connection Complete handler translates its event into the new enhanced
one which is then the single place of processing new connection
events.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Kernel object metadata had an extra data field added recently to
store bounds for stack objects. Use this data field to assign
IDs to thread objects at build time. This has numerous advantages:
* Threads can be granted permissions on kernel objects before the
thread is initialized. Previously, it was necessary to call
k_thread_create() with a K_FOREVER delay, assign permissions, then
start the thread. Permissions are still completely cleared when
a thread exits.
* No need for runtime logic to manage thread IDs
* Build error if CONFIG_MAX_THREAD_BYTES is set too low
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
GPIO_PIN_ENABLE, GPIO_PIN_DISABLE configuration constants overlap
functionality provided by pinmux driver. They usage makes the API
inconsistent. They are almost uniformly ignored by the existing device
drivers. Only few of them take these constants into account.
This commit deprecates usage of the two configuration constants.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
This adds CONFIG_EXECUTE_XOR_WRITE, which is enabled by default on
systems that support controlling whether a page can contain executable
code. This is also known as W^X[1].
Trying to add a memory domain with a page that is both executable and
writable, either for supervisor mode threads, or for user mode threads,
will result in a kernel panic.
There are few cases where a writable page should also be executable
(JIT compilers, which are most likely out of scope for Zephyr), so an
option is provided to disable the check.
Since the memory domain APIs are executed in supervisor mode, a
determined person could bypass these checks with ease. This is seen
more as a way to avoid people shooting themselves in the foot.
[1] https://en.wikipedia.org/wiki/W%5EX
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Headers should only be pulling in other headers if that header
needs it somewhere in its contents. Otherwise, pulling in other
headers should be done by C files to avoid extremely difficult
dependency loops (in this case, the main kernel.h and arch/cpu.h
on ARM)
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We need to start enforcing everywhere that kernel.h depends on
arch/cpu.h and any header included in the arch/cpu.h space cannot
depend on kernel.h.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We were unnecessarily pulling in headers which resulted in kernel.h
being pulled in, which is undesirable since arch/cpu.h pulls in
these headers.
Added integral type headers since we do need those.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
kernel.h depends on arch.h, and reverse dependencies need to be
removed. Define k_tid_t as some opaque pointer type so that arch.h
doesn't have to pull in kernel.h.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This header needs Zephyr's specific type definitions. It also
needs struct k_mem_partition and struct k_mem_domain, but they
are defined opaquely here instead of pulling in kernel.h (which
would create nasty dependency loops)
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This should clear up some of the confusion with random number
generators and drivers that obtain entropy from the hardware. Also,
many hardware number generators have limited bandwidth, so it's natural
for their output to be only used for seeding a random number generator.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Some "random" drivers are not drivers at all: they just implement the
function `sys_rand32_get()`. Move those to a random subsystem in
preparation for a reorganization.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Add a net_buf_id() API which translates a buffer into a zero-based
index, based on its placement in the buffer pool. This can be useful
if you want to associate an external array of meta-data contexts with
the buffers of a pool.
The added value of this API is slightly limited at the moment, since
the net_buf API allows custom user-data sizes for each pool (i.e. the
user data can be used instead of a separately allocated meta-data
array). However, there's some refactoring coming soon which will unify
all net_buf structs to have the same fixed (and typically small)
amount of user data. In such cases it may be desirable to have
external user data in order not to inflate all buffers in the system
because of a single pool needing the extra memory.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The client TLS code did not handle server issued close properly.
Now the connection is terminated properly and TLS thread is left up to
wait more requests from the user.
This commits adds new boolean field to net_app context. Because there
are already multiple boolean flags there, convert them all to bitfields
to save space.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As the TLS handshake might take long time before connection is ready,
check this before trying to send user data.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Previously, post_write and execute callbacks returned 1 when handled
and 0 for error condition. However, this wasn't detailed enough and
the engine can't propagate any sort of error back to users -- so it
doesn't even check the return values in many cases!
Let's adjust the resource callback functions of all objects and the
lwm2m_client sample to return 0 for success or a valid error code.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
With the change to support multi-fragement buffers in the LwM2M subsys,
the OPAQUE data type was direct write methods were broken.
Let's fix OPAQUE handling by using the newly introduced getter methods
which can use multiple user callbacks (depending on the size of the
user provided buffer). Let's also add public methods for users to set
/ get OPAQUE data in resources for future use with DTLS key data.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Use-cases for these subsystems appear to be limited to board/SOC
code, network stacks, or other drivers, no need to expose to
userspace at this time. If we change our minds it's easy enough
to add them back.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Certain interrupt-driven APIs were excluded as they are intended
only to be called from ISRs, or involve registering a callback
which runs in interrupt context.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
spi_transceive_async() omitted as we don't support k_poll objects
in user mode (yet).
The checking for spi_transceive() is fairly complex as we have to
validate the config struct passed in along with device instances
contained within it.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Many APIs had two versions, by port and by pin, which called the same
API with different parameters. This has been reorganized to reduce
the number of system calls.
Callback registration API skipped.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
pinmux_pin_get() needs memory validated for the func parameter since
it's a pointer that gets written to.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The page_layout API returns pointers to kernel memory and is not
exposed to user mode. This is fine for flash_get_page_count()
and flash_get_page_info APIs since these copy the values, but some
redesign work will be needed to get flash_page_foreach() working in
user mode since we do not want the callback running in a privileged
state.
Due to the way that (even unimplemented) system call prototypes are
generated, the definition of struct flash_pages_info needed to be
moved outside of the #ifdef.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Straightforward conversion for adc_enable/disable.
adc_read() uses a sequence table, which points to an array
of struct adc_seq_entry, each element pointing
to memory buffers. Need to validate all of these as being readable
by the caller, and the buffers writable.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
i2c actually only has two entry points into the driver,
i2c_configure and i2c_transfer. All the other APIs are derived
from these.
All derived APIs now just call i2c_transfer() with appropriate args.
The handler for i2c_transfer() needs to examine the message array
and validate all the buffers involved depending on whether we are
reading or writing to them.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Describe details and usecase for using this function. This follows
earlier updates for macros used to define buffers used by this
function (in 09b967366).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This API covers drivers for strips, or strings, of individually
addressable LEDs. Both RGB and grayscale LED strip drivers can be
implemented within these APIs.
The API only provides for updating the entire strip, since not all
strips support updating individual LEDs without affecting the others.
Subsequent patches will add individual driver support.
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
This header doesn't need arch/cpu.h for anything in it, remove
to ease dependency inclusion dependencies.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
_POLL_NUM_TYPES & _POLL_NUM_STATES are values of an enum, which the
preprocessor does not know about.
But the first of the removed lines needs to be evaluated by the
preprocessor using them.
The result is that the preprocessor will treat _POLL_NUM_TYPES
and _POLL_NUM_STATES as 0 in that expression, which would not seem the
intended behavior. It will also produce 2 warnings about this in each
file which includes kernel.h (lots)
=> lines 3779-3781 are be removed.
--------- The compiler warning:
include/kernel.h:3774:11: warning: "_POLL_NUM_TYPES" is not defined [-W
+ _POLL_NUM_TYPES \
^
include/kernel.h:3779:5: note: in expansion of macro ?_POLL_EVENT_NUM_U
^
include/kernel.h:3775:11: warning: "_POLL_NUM_STATES" is not defined [-
+ _POLL_NUM_STATES \
^
include/kernel.h:3779:5: note: in expansion of macro ?_POLL_EVENT_NUM_U
^
--------
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
This patch moves from the ZoAP API in subsys/net/lib/zoap to
the CoAP API in subsys/net/lib/coap which handles multiple
fragments for sending / receiving data.
NOTE: This patch moves the LwM2M library over to the CoAP APIs
but there will be a follow-up patch which re-writes the content
formatter reader / writers to use net_pkt APIs for parsing
across multiple net buffers. The current implementation assumes
all of the data will land in 1 buffer.
Samples using the library still need a fairly large NET_BUF_DATA_SIZE
setting. (Example: CONFIG_NET_BUF_DATA_SIZE=384)
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Created structures and unions needed to enable the software to
access these tables.
Also updated the helper macros to ease the usage of the MMU page
tables.
JIRA: ZEP-2511
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
The net_tcp_get/set_hdr() and net_udp_get/set_hdr() documentation
was not clear in corresponding header file. Clarify how the return
value of the function is supposed to be used.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Previously net_pkt.h, defined macros NET_PKT_TX_SLAB_DEFINE,
NET_PKT_DATA_POOL_DEFINE, but advertised them as intended for
"user specified data". However, net_pkt.c effectively used the
same parameters for slabs/pools, but this wasn't obvious due
to extra config param redirection. So, make following changes:
1. Rename NET_PKT_TX_SLAB_DEFINE() to NET_PKT_SLAB_DEFINE()
as nothing in its definition is TX-specific.
2. Remove extra indirection for config params, and use
NET_PKT_SLAB_DEFINE and NET_PKT_DATA_POOL_DEFINE to define
system pools.
3. Update docstrings for NET_PKT_SLAB_DEFINE and
NET_PKT_DATA_POOL_DEFINE.
Overall, this change removes vail of magic in the definition of
system pkt slabs/pools, making obvious the fact that any packet
slabs/pools - whether default system or additional, custom - are
defined in exactly the same manner (and thus work in the same manner
too).
Fixes#4327
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Some SOCs (e.g. STM32F0) can map the flash to address 0 and
the flash base address at the same time. Prevent writing to
duplicate flash address which stops the SOC.
Allow Cortex M SOCs to create their own vector table relocation
function.
Provide a relocation function for STM32F0x SOCs.
Fixes#3923
Signed-off-by: Bobby Noelte <b0661n0e17e@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Adds device tree bindings for the Kinetis System Integration Module
(SIM), and defines peripheral source clocks (e.g., system clock or bus
clock) and clock gates for all Kinetis SoCs.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
We should not close the TLS connection immediately if the TLS
data is not yet sent. So if user calls net_app_close() and we
still have data pending, then send the TLS data and only after
that close the connection.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As there can be multiple listening network contexts, it should
be possible to close one of them.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The server is able to listen and serve multiple incoming
connections. This commit does not add support for multiple
incoming TLS connections.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
arg6 is treated as a memory constraint. If that memory
address was expressed as an operand to 'mov' in the generated
code as an offset from the stack pointer, then the 'push'
instruction immediately before it could end up causing memory 4
bytes off from what was intended being passed in as the 6th
argument.
Add ESP register to the clobber list to fix this issue.
Fixes issues observed with k_thread_create() passing in a
NULL argument list with CONFIG_DEBUG=y.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is a runtime counterpart to K_THREAD_ACCESS_GRANT().
This function takes a thread and a NULL-terminated list of kernel
objects and runs k_object_access_grant() on each of them.
This function doesn't require any special permissions and doesn't
need to become a system call.
__attribute__((sentinel)) added to warn users if they omit the
required NULL termination.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
It's possible to declare static threads that start up as K_USER,
but these threads can't do much since they start with permissions on
no kernel objects other than their own thread object.
Rather than do some run-time synchronization to have some other thread
grant the necessary permissions, we introduce macros
to conveniently assign object permissions to these threads when they
are brought up at boot by the kernel. The tables generated here
are constant and live in ROM when possible.
Example usage:
K_THREAD_DEFINE(my_thread, STACK_SIZE, my_thread_entry,
NULL, NULL, NULL, 0, K_USER, K_NO_WAIT);
K_THREAD_ACCESS_GRANT(my_thread, &my_sem, &my_mutex, &my_pipe);
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Applications may want to be notified when various events
happen in the LwM2M rd client. Let's implement an event
callback which sends: connect, disconnect and update events.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
1. Add handling block1 option in handle_request(). The basic idea is
to declare structure block_context at compiled time and use "token"
as a key to pick up the on-going block cotext. It should be able to
support multiple blockwise transfer concurrently
2. Use write callback implemented in lwm2m_obj_firmware to deal w/ the
update state transition and than call the callback registered by the
application
3. move default_block_size to lwm2m_engine.c to share between
lwm2m_engine and lwm2m_obj_firmware_pull
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
[michael.scott@linaro.org: rebased on LwM2M net_app changes.]
Signed-off-by: Michael Scott <michael.scott@linaro.org>
1. Parse firmware pull URI
2. Add lwm2m_firmware_get/set_update_cb() for application to register
callback. This is because we want to check the update_state before
we pass to the application
3. Add lwm2m_firmware_get/set_update_result() and
lwm2m_firmware_get/set_update_stat() to manage the state transition
as well as the sanity check
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
[michael.scott@linaro.org: rebased on net_app framework and
lwm2m_message refactoring.]
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Based on the feedback, uses conventional spelling for "thread safe"
and also add notices more consistently.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Currently this is defined as a k_thread_stack_t pointer.
However this isn't correct, stacks are defined as arrays. Extern
references to k_thread_stack_t doesn't work properly as the compiler
treats it as a pointer to the stack array and not the array itself.
Declaring as an unsized array of k_thread_stack_t doesn't work
well either. The least amount of confusion is to leave out the
pointer/array status completely, use pointers for function prototypes,
and define K_THREAD_STACK_EXTERN() to properly create an extern
reference.
The definitions for all functions and struct that use
k_thread_stack_t need to be updated, but code that uses them should
be unchanged.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Make sure the multicast MAC address checker checks also
IPv4 multicast MAC address and accepts it.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
User can configure hostname of the device in Kconfig. This can
be used by mDNS responder to answer <hostname>.local queries.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
These headers provide an efficient, inline implementations of single-
and double- linked lists, and thus not threadsafe. They are intended
to be used as internal kernel APIs (and currently for example not
documented at https://www.zephyrproject.org/doc/). However, to avoid
issues when doing kernel programming (e.g. #4350), it makes sense
to explicitly, even verbosely, document these functions as not
threadsafe.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
With the introduction of CoAP and other protocols, URL parsing is
be needed when HTTP_PARSER is not. Let's split out the existing
functionality of URL parsing into it's own CONFIG and let
HTTP_PARSER use it by automatically selecting HTTP_PARSER_URL when
HTTP_PARSER is enabled.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
User threads can only create other nonessential user threads
of equal or lower priority and must have access to the entire
stack area.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We need to track permission on stack memory regions like we do
with other kernel objects. We want stacks to live in a memory
area that is outside the scope of memory domain permission
management. We need to be able track what stacks are in use,
and what stacks may be used by user threads trying to call
k_thread_create().
Some special handling is needed because thread stacks appear as
variously-sized arrays of struct _k_thread_stack_element which is
just a char. We need the entire array to be considered an object,
but also properly handle arrays of stacks.
Validation of stacks also requires that the bounds of the stack
are not exceeded. Various approaches were considered. Storing
the size in some header region of the stack itself would not allow
the stack to live in 'noinit'. Having a stack object be a data
structure that points to the stack buffer would confound our
current APIs for declaring stacks as arrays or struct members.
In the end, the struct _k_object was extended to store this size.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is too powerful for user mode, the other access APIs
require explicit permissions on the threads that are being
granted access.
The API is no longer exposed as a system call and hence will
only be usable by supervisor threads.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
It's currently too easy to run out of thread IDs as they
are never re-used on thread exit.
Now the kernel maintains a bitfield of in-use thread IDs,
updated on thread creation and termination. When a thread
exits, the permission bitfield for all kernel objects is
updated to revoke access for that retired thread ID, so that
a new thread re-using that ID will not gain access to objects
that it should not have.
Because of these runtime updates, setting the permission
bitmap for an object to all ones for a "public" object doesn't
work properly any more; a flag is now set for this instead.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Fixes issues where these were getting sign-extended when
dumped out, resulting in (for example) "ffffffff" being
printed when it ought to be "ff".
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Does the opposite of k_object_access_grant(); the provided thread will
lose access to that kernel object.
If invoked from userspace the caller must hace sufficient access
to that object and permission on the thread being revoked access.
Fix documentation for k_object_access_grant() API to reflect that
permission on the thread parameter is needed as well.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
By default, threads are created only having access to their own thread
object and nothing else. This new flag to k_thread_create() gives the
thread access to all objects that the parent had at the time it was
created, with the exception of the parent thread itself.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add Mass Storage Class header. The header is based on mass_storage.h,
has been cleaned up and extended by the Class and Protocol Codes.
mass_storage.h will be removed after mass_storage.c has been reworked.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Some chips are smart enough to handle the ACK request flag on
transmitted frames, so it's unneccessary for the L2 to wait for it.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is both required in L2's radio part as well as it might be useful
on some ieee802154 radio drivers.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Finally removing set_ieee_addr, set_short_addr and set_pan_id which have
been replaced by set_filter.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This will replace the current mandatory set_ieee_addr, set_short_addr
and set_pan_id functions, which are only valid if the hardware is
supporting filtering. Which is not the case on some chips.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This will be useful to know various generic hardware aspects that can be
used relevantly by the L2 layer.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that lqi and rssi are embedded into net_pkt, there is no need for
that function.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Instead of having dedicated function on the radio api level for 15.4,
let's just add the relevant values to the net_pkt structure (if only
IEEE802154 is enabled). It's simpler and make the values relevantly
tied to the received packet.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is subject to the constraint that such system calls must have a
return value which is "u64_t" or "s64_t".
So far all the relevant kernel calls just have zero or one arguments,
we can later add more _syscall_ret64_invokeN() APIs as needed.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
- Dumping error messages split from _k_object_validate(), to avoid spam
in test cases that are expected to have failure result.
- _k_object_find() prototype moved to syscall_handler.h
- Clean up k_object_access() implementation to avoid double object
lookup and use single validation function
- Added comments, minor whitespace changes
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This API only gets used inside system call handlers and a specific test
case dedicated to it. Move definition to the private kernel header along
with the rest of the defines for system call handlers.
A non-userspace inline variant of this function is unnecessary and has
been deleted.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
To avoid making a system call for every character emitted, there is now
a small line buffer if userspace is enabled. The interface to the kernel
is a new system call which takes a sized buffer of console data.
If userspace is not enabled this works like before.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This path introduce API for retrieving a minimum write-block-size
supported by the flash driver.
This value can differ from the hardware alignment requirement
(as it does for nRF5x).
As the driver has a certain requirement for alignment
when writing, it is necessary to export this value for upper modules
which need to know the write-block-size (for instance, NFFS needs this).
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
There are several issues with the dev_config union used as a
convenience when calling the i2c_configure api. One, the union is well
name spaced protected and doesn't convey use with just i2c. Second
there are assumptions of how the bits might get packed by the union
which can't be guaranteed. Since the API takes a u32_t lets change in
tree uses to using the macros to setup a u32_t and make the union as
deprecated.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This reverts commit a3a57b4db1.
There is _no_ need for any vendor specific gremlin bit anywhere.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If CS (Chip Select, known also as Slave Select...) is managed externaly
of the stm32_ll SPI controller, just config NSS line management
accordingly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
These needed "memory" clobbers otherwise the compiler would do
unnecessary optimizations for parameters passed in as pointer
values.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Adding net_mgmt_event_notify_with_info() which lets the event notifier
to pass dedicated data along with the event. The size of data that can
be passed must be limited to the biggest data passed (which will be
currently IPv6 + prefix).
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
These are removed as the APIs that use them are not suitable for
exporting to userspace.
- Kernel workqueues run in supervisor mode, so it would not be
appropriate to allow user threads to submit work to them. A future
enhancement may extend or introduce parallel API where the workqueue
threads may run in user mode (or leave as an exercise to the user).
- Kernel slabs store private bookkeeping data inside the
user-accessible slab buffers themselves. Alternate APIs are planned
here for managing slabs of kernel objects, implemented within the
runtime library and not the kernel.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
k_pipe_block_put() will be done in another patch, we need to design
handling for the k_mem_block object.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This patch adds a routine which can be used to iterate over all flash
pages on the device.
This can be also done by using flash_get_page_info_by_idx(), but that
would add an unnecessary loop over the layout array for each page.
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
Current coap library fails to parse or prepare if packet is more
than one fragment. Added support to handle multi fragment packet.
Also well-known/core api used to prepare coap packet and send it
through net context api immediately. This is goind to be problematic
if user doesn't enable net context. Also user can not encrypt coap
packets. Now api will return prepared coap packet to application.
Application will send it to peer.
Jira: ZEP-2210
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
ZOAP library has certain limitations in parsing and preparation of
coap messages. It can handle only on single network fragment. If
network packet is split between multiple fragments it fails. This
patch is just copy and rename of 'zoap' to 'coap'.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
These modify kernel object metadata and are intended to be callable from
user threads, need a privilege elevation for these to work.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We want applications to be able to enable and disable userspace without
changing any code. k_thread_user_mode_enter() now just jumps into the
entry point if CONFIG_USERSPACE is disabled.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Some our Zephyr tools don't like seeing UTF-8 characters, as reported in
issue #4131) so a quick scan and replace for UTF-8 characters in .rst,
.h, and Kconfig files using "file --mime-encoding" (excluding the /ext
folders) finds these files to tweak.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
This used to exist because in earlier versions of the system call
interfaces, an "extern" declaration of the system call implementation
function would precede the real inline version of the implementation.
The compiler would not like this and would throw "static declaration
of ‘foo’ follows non-static declaration". So alternate macros were
needed which declare the implementation function as 'static inline'
instead of extern.
However, currently the inline version of these system call
implementations appear first, the K_SYSCALL_DECLARE() macros appear in
the header generated by gen_syscalls.py, which is always included at the
end of the header file. The compiler does not complain if a
static inline function is succeeded by an extern prototype of the
same function. This lets us simplify the generated system call
macros and just use __syscall everywhere.
The disassembly of this was checked on x86 to ensure that for
kernel-only or CONFIG_USERSPACE=n scenarios, everything is still being
inlined as expected.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The implementation is based on net app API. It sends the request and
parses the server reply by following some suggestions mentioned in the
secion "SNTP Server Operations" of RFC 4330.
The system uptime is used as the transmit timestamp of client request
This lib can work on those devices without RTC.
Signed-off-by: Aska Wu <aska.wu@linaro.org>
sendto() and recvfrom() are often used with datagram socket.
sendto() is based on net_context_sendto() and recvfrom() is based on
zsock_recv() with parsing source address from the packet header.
Signed-off-by: Aska Wu <aska.wu@linaro.org>
Introduce net_pkt_get_src_addr() as a helper function to get the source
address and port from the packet header.
Signed-off-by: Aska Wu <aska.wu@linaro.org>
Add the following application-facing memory domain APIs:
k_mem_domain_init() - to initialize a memory domain
k_mem_domain_destroy() - to destroy a memory domain
k_mem_domain_add_partition() - to add a partition into a domain
k_mem_domain_remove_partition() - to remove a partition from a domain
k_mem_domain_add_thread() - to add a thread into a domain
k_mem_domain_remove_thread() - to remove a thread from a domain
A memory domain would contain some number of memory partitions.
A memory partition is a memory region (might be RAM, peripheral
registers, flash...) with specific attributes (access permission,
e.g. privileged read/write, unprivileged read-only, execute never...).
Memory partitions would be defined by set of MPU regions or MMU tables
underneath.
A thread could only belong to a single memory domain any point in time
but a memory domain could contain multiple threads.
Threads in the same memory domain would have the same access permission
to the memory partitions belong to the memory domain.
The memory domain APIs are used by unprivileged threads to share data
to the threads in the same memory and protect sensitive data from
threads outside their domain. It is not only for improving the security
but also useful for debugging (unexpected access would cause exception).
Jira: ZEP-2281
Signed-off-by: Chunlin Han <chunlin.han@linaro.org>
The compiler was complaining about impossible constraints since register
constraint was provided, but there are no general purpose registers left
available.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Device drivers need to be treated like other kernel objects, with
thread-level permissions and validation of struct device pointers passed
in from userspace when making API calls.
However it's not sufficient to identify an object as a driver, we need
to know what subsystem it belongs to (if any) so that userspace cannot,
for example, make Ethernet driver API calls using a UART driver object.
Upon encountering a variable representing a device struct, we look at
the value of its driver_api member. If that corresponds to an instance
of a driver API struct belonging to a known subsystem, the proper
K_OBJ_DRIVER_* enumeration type will be associated with this device in
the generated gperf table.
If there is no API struct or it doesn't correspond to a known subsystem,
the device is omitted from the table; it's presumably used internally
by the kernel or is a singleton with specific APIs for it that do not
take a struct device parameter.
The list of kobjects and subsystems in the script is simplified since
the enumeration type name is strongly derived from the name of the data
structure.
A device object is marked as initialized after its init function has
been run at boot.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
To define a system call, it's now sufficient to simply tag the inline
prototype with "__syscall" or "__syscall_inline" and include a special
generated header at the end of the header file.
The system call dispatch table and enumeration of system call IDs is now
automatically generated.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
A previous patch which moved dispatching the health publish callback
to a later moment introduced a regression where the period divider
does not get updated when it should. In fact, having the divider as
part of the Health Server context is redundant, since the same
information is already stored generically in the model publication
context. Switching to using the model publication context makes things
simpler and ensures that the value is always up-to-date.
With this patch it is possible to pass MESH/SR/HM/CFS/BV-02-C.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There was no handler functions for adding, removing and looking up
IPv4 multicast addresses in the network interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The IPv4 address in struct in_addr is in big endian so check
the multicast address value correctly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
- syscall.h now contains those APIs needed to support invoking calls
from user code. Some stuff moved out of main kernel.h.
- syscall_handler.h now contains directives useful for implementing
system call handler functions. This header is not pulled in by
kernel.h and is intended to be used by C files implementing kernel
system calls and driver subsystem APIs.
- syscall_list.h now contains the #defines for system call IDs. This
list is expected to grow quite large so it is put in its own header.
This is now an enumerated type instead of defines to make things
easier as we introduce system calls over the new few months. In the
fullness of time when we desire to have a fixed userspace/kernel ABI,
this can always be converted to defines.
Some new code added:
- _SYSCALL_MEMORY() macro added to check memory regions passed up from
userspace in handler functions
- _syscall_invoke{7...10}() inline functions declare for invoking system
calls with more than 6 arguments. 10 was chosen as the limit as that
corresponds to the largest arg list we currently have
which is for k_thread_create()
Other changes
- auto-generated K_SYSCALL_DECLARE* macros documented
- _k_syscall_table in userspace.c is not a placeholder. There's no
strong need to generate it and doing so would require the introduction
of a third build phase.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
If the data parameter in net_pkt_insert() is NULL, then just
insert amount of data but clear the area instead of copying.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
User was able to tweak IPv6 hop-limit so introduce similar
feature for IPv4 Time-To-Live value.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This wasn't working properly with CONFIG_APPLICATION_MEMORY enabled as
the sections weren't handled in the linker script.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This patch removes deprecated API functions and data types from
dma.h file as well as device drivers.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
This patch adds filesystem interface implementation for NFFS.
Default configuration for mem slabs sizes are the same as in Mynewt.
Origin: Original
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Composite multifunction USB devices should be able to know about
configuration change, implement it through existing callback.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add support for USB 2.0 and NCM CDC protocol
Change-Id: Ib815b7d9d02d404b5dfbcc8aba1fcd7e6de71bd3
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
A quick look at "man syscall" shows that in Linux, all architectures
support at least 6 argument system calls, with a few supporting 7. We
can at least do 6 in Zephyr.
x86 port modified to use EBP register to carry the 6th system call
argument.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Cleanup I2C drivers to not use bitfield access for config information
and instead use accessor macros that use shifts & masks. This is
cleanup towards removing the bitfield access in the future.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This is the final stage of moving the LwM2M library internals to
the net_app APIs. This means we can support DTLS and other
built-in features in the future. All of the logic for
establishing the network connection is removed from the sample
app.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
This allows use to associate easily the replies / pending operations
with a specific network connection.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
The LwM2M library does not use net_app APIs internally. To help
this effort let's establish a user facing structure "lwm2m_ctx"
(similar to http_client_ctx and mqtt_ctx) and start it off by
wrappering the net_context structure.
Future patches will add user setup options to this structure and
eventually remove the net_context structure in favor of a net_app_ctx.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
This implements mDNS client from RFC 6762. What this means that
caller is able to resolve "hostname.local" names using multicast DNS.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
* Instead of a common system call entry function, we instead create a
table mapping system call ids to handler skeleton functions which are
invoked directly by the architecture code which receives the system
call.
* system call handler prototype specified. All but the most trivial
system calls will implement one of these. They validate all the
arguments, including verifying kernel/device object pointers, ensuring
that the calling thread has appropriate access to any memory buffers
passed in, and performing other parameter checks that the base system
call implementation does not check, or only checks with __ASSERT().
It's only possible to install a system call implementation directly
inside this table if the implementation has a return value and requires
no validation of any of its arguments.
A sample handler implementation for k_mutex_unlock() might look like:
u32_t _syscall_k_mutex_unlock(u32_t mutex_arg, u32_t arg2, u32_t arg3,
u32_t arg4, u32_t arg5, void *ssf)
{
struct k_mutex *mutex = (struct k_mutex *)mutex_arg;
_SYSCALL_ARG1;
_SYSCALL_IS_OBJ(mutex, K_OBJ_MUTEX, 0, ssf);
_SYSCALL_VERIFY(mutex->lock_count > 0, ssf);
_SYSCALL_VERIFY(mutex->owner == _current, ssf);
k_mutex_unlock(mutex);
return 0;
}
* the x86 port modified to work with the system call table instead of
calling a common handler function. fixed an issue where registers being
changed could confuse the compiler has been fixed; all registers, even
ones used for parameters, must be preserved across the system call.
* a new arch API for producing a kernel oops when validating system call
arguments added. The debug information reported will be from the system
call site and not inside the handler function.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Previous description of counter_set_alarm() was insufficient and
could be ambiguously interpreted.
Signed-off-by: Michał Kruszewski <michal.kruszewski@nordicsemi.no>
Whenever the HCI ACL flow control is violated by the Host, a Data Buffer
Overflow event is now issued by the Controller (if enabled) to notify
the Host of the buffer overrun.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Create support for registering a callback that will be called
if the device leaves or joins IPv6 multicast group.
Jira: ZEP-1673
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
- _arch_user_mode_enter() implemented
- _arch_is_user_context() implemented
- _new_thread() will honor K_USER option if passed in
- System call triggering macros implemented
- _thread_entry_wrapper moved and now looks for the next function to
call in EDI
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Now creating a thread will assign it a unique, monotonically increasing
id which is used to reference the permission bitfield in the kernel
object metadata.
Stub functions in userspace.c now implemented.
_new_thread is now wrapped in a common function with pre- and post-
architecture thread initialization tasks.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
- There's no point in building up "validity" (declared volatile for some
strange reason), just exit with false return value if any of the page
directory or page table checks don't come out as expected
- The function was returning the opposite value as its documentation
(0 on success, -EPERM on failure). Documentation updated.
- This function will only be used to verify buffers from user-space.
There's no need for a flags parameter, the only option that needs to
be passed in is whether the buffer has write permissions or not.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The byte ones are required for ns16550 uart driver which is
present on some arm socs. Add half-word ones for completeness.
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add a command "net arp" to net-shell. This new command will
print ARP cache contents if IPv4 and Ethernet are enabled.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Doxygen comments for documenting structs have (known) issues,
and the Breathe addon for Sphinx used to create our API docs
has a known issue with forcing line breaks with @n or <br/>
This patch tweaks the comments to use a method used in i2s.h
to use @param comments for the members of a struct, and using
4 leading spaces (as done in i2s.h as well) to create a pre
block for the bit-field layout comments.
Fixes: #1415
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
In various places, a private _thread_entry_t, or the full prototype
were being used. Be consistent and use the same typedef everywhere.
Signen-off-by: Andrew Boie <andrew.p.boie@intel.com>
Added an internal function to obtain the flash page layout in
run-length encoded format. The API is simple and allows the actual
public API implementations to be simple and maintainable.
This feature can be enabled by using the FLASH_PAGE_LAYOUT Kconfig
option. This API is required for the implementation of flash file
system.
Added a public API to get flash page information (size and start offset)
by offset within the flash and by index of the page.
Added a generic implementation of the internal flash_get_page_info API.
Added an additional public API call to get the total count of pages in
the flash memory and its generic implementation.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Store image in sequence of certain blocks.
Module is intended to be use by a higher-level
image management protocol module
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
read, update status
trigger flashing
erase image bank
Module is intended to be use by a higher-level
image management protocol module.
Signed-off-by: Fabio Utzig <utzig@apache.org>
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
This was felt to be necessary at one point but actually isn't.
- When a thread is initialized to use a particular stack, calls will be
made to the MMU/MPU to restrict access to that stack to only that
thread. Once a stack is in use, it will not be generally readable even
if the buffer exists in application memory space.
- If a user thread wants to create a thread, we will need to have some
way to ensure that whatever stack buffer passed in is unused and
appropriate. Since unused stacks in application memory will be generally
accessible, we can just check that the calling thread to
k_thread_create() has access to the stack buffer passed in, it won't if
the stack is in use.
On ARM we had a linker definition for .stacks, but currently stacks are
just tagged with __noinit (which is fine).
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
If an event cmd is 0, NET_MGMT_GET_COMMAND() will return 0. That breaks
mgmt event core logic.
Jira: ZEP-2594
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The generated struct k_thread could end up in the wrong memory space
if CONFIG_APPLICATION_MEMORY is enabled.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Previously, this was only done if an essential thread self-exited,
and was a runtime check that generated a kernel panic.
Now if any thread has k_thread_abort() called on it, and that thread
is essential to the system operation, this check is made. It is now
an assertion.
_NANO_ERR_INVALID_TASK_EXIT checks and printouts removed since this
is now an assertion.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
It's now possible to instantiate a thread object, but delay its
execution indefinitely. This was already supported with K_THREAD_DEFINE.
A new API, k_thread_start(), now exists to start threads that are in
this state.
The intended use-case is to initialize a thread with K_USER, then grant
it various access permissions, and only then start it.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
All system calls made from userspace which involve pointers to kernel
objects (including device drivers) will need to have those pointers
validated; userspace should never be able to crash the kernel by passing
it garbage.
The actual validation with _k_object_validate() will be in the system
call receiver code, which doesn't exist yet.
- CONFIG_USERSPACE introduced. We are somewhat far away from having an
end-to-end implementation, but at least need a Kconfig symbol to
guard the incoming code with. Formal documentation doesn't exist yet
either, but will appear later down the road once the implementation is
mostly finalized.
- In the memory region for RAM, the data section has been moved last,
past bss and noinit. This ensures that inserting generated tables
with addresses of kernel objects does not change the addresses of
those objects (which would make the table invalid)
- The DWARF debug information in the generated ELF binary is parsed to
fetch the locations of all kernel objects and pass this to gperf to
create a perfect hash table of their memory addresses.
- The generated gperf code doesn't know that we are exclusively working
with memory addresses and uses memory inefficently. A post-processing
script process_gperf.py adjusts the generated code before it is
compiled to work with pointer values directly and not strings
containing them.
- _k_object_init() calls inserted into the init functions for the set of
kernel object types we are going to support so far
Issue: ZEP-2187
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The net_ipaddr_parse() will take a string with optional port
number and convert its information into struct sockaddr.
The format of the IP string can be:
192.0.2.1:80
192.0.2.42
[2001:db8::1]:8080
[2001:db8::2]
2001:db::42
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This patch fixes a couple of issues with the stack guard size and
properly constructs the STACK_ALIGN and STACK_ALIGN_SIZE definitions.
The ARM AAPCS requires that the stack pointers be 8 byte aligned. The
STACK_ALIGN_SIZE definition is meant to contain the stack pointer
alignment requirements. This is the required alignment at public API
boundaries (ie stack frames).
The STACK_ALIGN definition is the required alignment for the start
address for stack buffer storage. STACK_ALIGN is used to validate
the allocation sizes for stack buffers.
The MPU_GUARD_ALIGN_AND_SIZE definition is the minimum alignment and
size for the MPU. The minimum size and alignment just so happen to be
32 bytes for vanilla ARM MPU implementations.
When defining stack buffers, the stack guard alignment requirements
must be taken into consideration when allocating the stack memory.
The __align() must be filled in with either STACK_ALIGN_SIZE or the
align/size of the MPU stack guard. The align/size for the guard region
will be 0 when CONFIG_MPU_STACK_GUARD is not set, and 32 bytes when it
is.
The _ARCH_THREAD_STACK_XXXXXX APIs need to know the minimum alignment
requirements for the stack buffer memory and the stack guard size to
correctly allocate and reference the stack memory. This is reflected
in the macros with the use of the STACK_ALIGN definition and the
MPU_GUARD_ALIGN_AND_SIZE definition.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
TLS and DTLS are not related to each other so allow DTLS to be
enabled even if TLS is disabled.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is needed when one wants to copy the whole fragment chain
and its head pointer net_pkt.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The IP header was stripped by _net_app_ssl_mux() when it received
IP packet. This is fine but if the application expects the get
the IP header, then there is a problem. Fix this by saving IP
header to ssl_context and then putting it back in front of the
packet when the data is passed to application.
Note that this IP header is not used by net_app when the packet
is sent because TLS/DTLS creates a tunnel for transferring packets
and user can only sent packets via this tunnel.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Replace net_udp_get_hdr and net_udp_set_hdr macros with static inline
function definitions to avoid unused variable build warnings when
NET_UDP is not defined.
This fixes the following warning:
subsys/net/ip/6lo.c: In function 'compress_IPHC_header':
subsys/net/ip/6lo.c:759:22: warning: unused variable 'hdr' [-Wunused-variable]
struct net_udp_hdr hdr, *udp;
^~~
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
k_delayed_work_cancel now only fail if it hasn't been submitted which
means it is not in use anyway so it safe to reset its data regardless
of its return.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This is necessary in order for k_queue_get to work properly since that
is used with buffer pools which might be used by multiple threads asking
for buffers.
Jira: ZEP-2553
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Implement the LE Read Channel Map HCI command, along with making the
reading of the multi-byte channel map value from the connection pointer
thread-safe in case the ISR triggers while we are reading the value.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Although the current BLE controller only supports a single TX power (0
dBm), the qualification tests require the 2 Read TX Power to be
present and supported in the controller, so implement them while
returning always 0 dBm.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
When the CONFIG_BT_CTLR_CONN_RSSI option is set, the connection RSSI is
available in the controller, and can be reported to the Host via the
Read RSSI command. Implement the command, which is required for
qualification.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The original commit 8ebaf29927 ("net: http: dont timeout
on HTTP requests w/o body") was intended to handle a case
where an HTTP response had been retrieved from the server but
the HTTP parser couldn't meet the criteria for calling
"on_message_complete". For example, a POST to a REST API
where the server doesn't return anything but an HTTP
status code.
It was a really bad idea to check a semaphore count. There
is a lot of kernel logic built into semaphores and how the
count is adjusted. The assumption that the value is 0
after the k_sem_give() is incorrect. It's STILL 0 if
something is pending with a k_sem_take(). By the time
k_sem_give() is done executing the other thread has now
been kicked and the count is back to 0.
This caused the original check to always pass and in turn
breakage was noticed in the http_client sample.
Let's do this the right way by setting a flag when
on_message_complete is called and if that flag is not set
by the time we reach recv_cb, let's give back the semaphore
to avoid a timeout.
Jira: ZEP-2561
Signed-off-by: Michael Scott <michael.scott@linaro.org>
The server needs global enable/disable status instead of only being
able to enable or disable just the TLS server part.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
s_addr is actually an unsigned integer and it's not guaranteed to be
aligned on 4-byte boundary. In net_ipv4_addr_cmp(), accessing s_addr
directly might cause an unaligned exception on some platform
like xtensa. Use UNALIGNED_GET() to prevent unalgined exception.
Signed-off-by: Aska Wu <aska.wu@linaro.org>
POSIX requires struct sockaddr's field to be named "sa_family"
(not just "family"):
http://pubs.opengroup.org/onlinepubs/009696699/basedefs/sys/socket.h.html
This change allows to port POSIX apps easier (including writing
portable apps using BSD Sockets compatible API).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
POSIX doesn't guarantee that "legacy" struct sockaddr is large enough
for all usages, e.g. IPv6 addresses, and instead requires use of
struct sockaddr_storage:
http://pubs.opengroup.org/onlinepubs/009696699/basedefs/sys/socket.h.html
... shall define the sockaddr_storage structure. This structure
shall be:
Large enough to accommodate all supported protocol-specific
address structures
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
'pad' parameter controls whether crc16() should add padding at the end
of input bytes or not. This allows to compute CRC16 for data stored in
non-contiguous buffers where CRC value is calculated using subsequent
calls to crc16() with padding added only for last chunk.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
The values returned by the controller are Identity Roots and not
Identity Resolving Key. To avoid confusion, and since IRK is commonly
associated with the latter, use "ir" instead.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
In order to allow for the controller to report the RSSI of a received
Scan Request, include the field inside the Scan Request Received
Vendor-Specific Event.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The Vendor-Specific header file defines the commands and events used to
communicate with a Zephyr Vendor-Specific capable controller from a
Host. Translate the existing specification fully into the header file.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
* apply STACK_GUARD_SIZE, no extra space will be added if
MPU_STACK_GUARD is disabled
* When ARC_STACK_CHECKING is enabled, MPU_STACK_GUARD will be
disabled
* add two new api: arc_core_mpu_default and arc_core_mpu_region
to configure mpu regions
* improve arc_core_mpu_enable and arc_core_mpu_disable
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
* add arc mpu driver
* modify the corresponding kconfig and kbuild
* currently only em_starterkit 2.2's em7d configuration
has mpu feature (mpu version 2)
* as the minimum region size of arc mpu version 2 is 2048 bytes and
region size should be power of 2, the stack size of threads
(including main thread and idle thread) should be at least
2048 bytes and power of 2
* for mpu stack guard feature, a stack guard region of 2048 bytes
is generated. This brings more memory footprint
* For arc mpu version 3, the minimum region size is 32 bytes.
* the codes are tested by the mpu_stack_guard_test and stackprot
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
If the expire send timer expires, then it sends the packet.
If that happens, then we must not try to send the same packet
again if we receive ACK etc. which can cause re-sends to happen.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is a header file, the definition for _trace_list_sys_ring_buf
needs to be 'extern' otherwise multiple instances of this variable
could be instantiated, leading to linker errors.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
XCC assembler freaks out if a section name has __FILE__ in it,
forward slashes and quotation marks confuse it and result in
build errors.
This is not a perfect fix, its possible for two sections to collide,
but at worst this will result is some unnecessary space in noinit,
fooling gc-sections.
XCC also doesn't support __COUNTER__, use __LINE__ as a substitute.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Nobody should be including a compiler-specific toolchain header
like this, the generic toolchain.h shouls always be used.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Clarify that the clock-frequency is the bitrate at boot and introduce
defines that .dts files can use to set the clock-frequency.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Added a define to use in code that provides the amount we need to shift
the speed settings in the i2c config params.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Currently, the HTTP_NETWORK_TIMEOUT setting is hard-coded as 20 seconds.
Not every application may want to wait that long, so let's change this
to a CONFIG option: CONFIG_HTTP_CLIENT_NETWORK_TIMEOUT
NOTE: This also removes HTTP_NETWORK_TIMEOUT from the public http.h
include file. It was not being used externally to HTTP client sources.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Partial implementation of the IEEE 1003.1 pthread API, including
mutexes and condition variables in their default behaviors, and
pthread barrier objects. The rwlock and spinlocks abstractions are
not supported in this commit (both only make sense in the presence of
multiple SMP processors).
Note that this is the IPC mechanisms only. The thread creation API
itself is unsupported: Zephyr threads work differently from pthreads
and don't port cleanly in all cases. Likewise the "_INITIALIZER"
macros from pthreads don't work cleanly here, and _DECLARE macros have
been provided to statically initialize pthread primitives in a manner
more native to Zephyr
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This has been a limitation caused by k_fifo which could only remove
items from the beggining, but with the change to use k_queue in
k_work_q it is now possible to remove items from any position with
use of k_queue_remove.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes use of POLL_EVENT in case k_poll is enabled which is
preferable over wait_q as that allows objects to be removed for the
data_q at any time.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Fix misspellings in .h files missed during code reviews
and affecting generated API documentation
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Implement the 4.2 event LE Directed Advertising Report, used for
scanners in a privacy-enabled controller to report directed advertising
events whose TargetA cannot be resolved by the local controller.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
An abnormal crash was encountered in ARMv6-M SoCs that don't have flash
starting at 0. With Zephyr OS the reason for this crash is that, on
ARMv6-M the system requires an exception vector table at the 0 address.
We implement the relocate_vector_table function to move the vector table
code to address 0 on systems which don't have the start of code already
at 0.
[kumar.gala: reworderd commit message, tweaked how we check if we need
to copy vector table]
Signed-off-by: Xiaorui Hu <xiaorui.hu@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Now that we have an mcux shim driver, remove the old k64-specific
driver. Also remove include/drivers/k20_sim.h, since the old
k64-specific driver was the only thing left using it.
Jira: ZEP-2025
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The Xtensa port was the only one remaining to be converted to the new
way of connecting interrupts in Zephyr. Some things are still
unconverted, mainly the exception table, and this will be performed
another time.
Of note: _irq_priority_set() isn't called on _ARCH_IRQ_CONNECT(), since
IRQs can't change priority on Xtensa: while the architecture has the
concept of interrupt priority levels, each line has a fixed level and
can't be changed.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
According to the "ESP32 Technical Reference Manual", the ESP32 SoC
series supports up to 6 functions per GPIO pin. Add PINMUX_FUNC_E and
PINMUX_FUNC_F.
Jira: ZEP-2297
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
This patch adjusts the ARM MPU implementation to be compliant to the
recent changes that introduced the opaque kernel data types.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch always defines the ARCH_THREAD_STACK_XXX macros/functions
regardless of the MPU_STACK_GUARD usage. Only use MPU_STACK_GUARD when
determining the minimum stack alignment.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
The mimimum mpu size is 32 bytes, but requires mpu base address to be
aligned on 32 bytes to work. Define architecture thread macro when
MPU_STACK_GUARD config to allocate stack with 32 more bytes.
Signed-off-by: Michel Jaouen <michel.jaouen@st.com>
The API name space for Bluetooth is bt_* and BT_* so it makes sense to
align the Kconfig name space with this. The additional benefit is that
this also makes the names shorter. It is also in line with what Linux
uses for Bluetooth Kconfig entries.
Some Bluetooth-related Networking Kconfig defines are renamed as well
in order to be consistent, such as NET_L2_BLUETOOTH.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
IPSO Smart Objects are a set of template objects based on the LwM2M
object framework which are designed to represent standard hardware
such as temperature and humidity sensors or light controls.
Let's add a place for these objects to live as well as an initial
temperature sensor object.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Origin: SICS-IoT / Contiki OS
URL: https://github.com/sics-iot/lwm2m-contiki/tree/lwm2m-standalone-dtls
commit: d07b0bcd77ec7e8b93787669507f3d86cfbea64a
Purpose: Introduction of LwM2M client library.
Maintained-by: Zephyr
Lightweight Machine-to-Machine (LwM2M) is a protocol stack extension
of the Constrained Application Protocol (CoAP) which uses UDP
transmission packets.
This library was based on source worked on by Joakim Eriksson,
Niclas Finne and Joel Hoglund which was adopted by Contiki and then
later revamped to work as a stand-alone library.
A VERY high level summary of the changes made:
- [ALL] sources were re-formatted to Zephyr coding standards
- [engine] The engine portion was re-written due to the heavy reliance
on ER-CoAP APIs which are not compatible to the Zephyr CoAP APIs as
well as other Zephyr specific needs.
- [engine] All LWM2M/IPSO object data is now abstracted into resource
data which stores information like the data type, length, callbacks
to help with read/write. The engine modifies this data directly (or
makes callbacks) instead of all of the logic for this living in each
object's code. (This wasn't scaling well as I was implementing
changes).
- [engine] Related to the above change, I also added a generic set of
getter/setter functions that user applications can call to change
the object data instead of having to add getter/setting methods in
each object.
- [engine] The original sources shared the engine's context structure
quite extensively causing a problem with portability. I broke up the
context into it's individual parts: LWM2M path data, input data and
output data and pass only the needed data into each set of APIs.
- [content format read/writer] sources were re-organized into single
.c/h files per content formatter.
- [content format read/writer] sources were re-written where necessary
to remove the sharing of the lwm2m engine's context and instead only
requires the path and input or output data specific to it's
function.
- [LwM2M objects] re-written using the new engine's abstractions
Signed-off-by: Michael Scott <michael.scott@linaro.org>
In the 08 Feb 2017 V1.0 LwM2M specification page 80 mentions: in
response to a "Notify" operation for which it is not interested in
any more, the LwM2M Server can send a "Reset Message".
Leshan server sends this CoAP RST response and it does not contain
the originating message token (which is also how the packet flow looks
on page 81 of the LwM2M spec). Using the current ZoAP sources, the
client has no way of matching back to observation which needs to be
cancelled.
Let's add a match for message ID of a reply where there is no token
to handle this case.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
[ricardo.salveti@linaro.org: Handle both piggybackend and separate
response (id doesn't need to match, only token).]
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
We currently support converting from cpu format to BE for
u16_t and u32_t. Let's add u64_t as well.
NOTE: This will be used in LWM2M subsys later.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
This patch adds the allow flash write CONFIG option to the ARM MPU
configuration in privileged mode.
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Signed-off-by: David Brown <david.brown@linaro.org>
This patch adds the allow flash write CONFIG option to the NXP MPU
configuration in privileged mode.
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Signed-off-by: David Brown <david.brown@linaro.org>
This is a convenience macro for getting the master/slave operational
mode, which will be used in a subsequent commit.
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
This fixes the existing situation that "if application buffers data,
it's the problem of application". It's actually the problem of the
stack, as it doesn't allow application to control receive window,
and without this control, any buffer will overflow, peer packets
will be dropped, peer won't receive acks for them, and will employ
exponential backoff, the connection will crawl to a halt.
This patch adds net_context_tcp_recved() function which an
application must explicitly call when it *processes* data, to
advance receive window.
Jira: ZEP-1999
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This adds NET_REQUEST_BT_ADVERTISE which can be used to advertise
IPSS service so the remote devices can connect to it.
Jira: ZEP-2451
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This commit adds new sensor channel macro SENSOR_CHAN_BLUE which can
be used for RGB sensors to get illuminance in Blue spectrum.
Signed-off-by: Punit Vara <punit.vara@intel.com>
This is a simpler memory arrangement; RAM will start with
app data, and everything after it is either kernel data or
unclaimed memory reserved for the kernel's use.
New linker variables are also implemented here.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
These can be computed from start/end values, but such
arithmetic can't be done when populating at build time
struct member values.
Some documentation has been added to explain exactly
what these symbols mean. It is intended for application
RAM to come first, then followed by kernel RAM and then
all unclaimed memory (also considered kernel RAM).
Obsolete _image_ram_all[] removed.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Kernel data size shifts in between linker passes due to the addition
of the page tables. We would like application memory bounds to
remain fixed so that we can program the MMU permissions for it
at build time.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This was not working properly but only noticeable if the
sections involved were not preceded by a KERNEL_INPUT_SECTION
definition for the same sections (i.e. the application data
coming first in the memory map)
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Page faults will additionally dump out some interesting
page directory and page table flags for the faulting
memory address.
Intended to help determine whether the page tables have been
configured incorrectly as we enable memory protection features.
This only happens if CONFIG_EXCEPTION_DEBUG is turned on.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Includes updates to Zephyr networking API feature list (also minor
tweaks to it not dorectly related to sockets), overview of BSD
Sockets compatible API, and basic API reference section.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Historically, stacks were just character buffers and could be treated
as such if the user wanted to look inside the stack data, and also
declared as an array of the desired stack size.
This is no longer the case. Certain architectures will create a memory
region much larger to account for MPU/MMU guard pages. Unfortunately,
the kernel interfaces treat both the declared stack, and the valid
stack buffer within it as the same char * data type, even though these
absolutely cannot be used interchangeably.
We introduce an opaque k_thread_stack_t which gets instantiated by
K_THREAD_STACK_DECLARE(), this is no longer treated by the compiler
as a character pointer, even though it really is.
To access the real stack buffer within, the result of
K_THREAD_STACK_BUFFER() can be used, which will return a char * type.
This should catch a bunch of programming mistakes at build time:
- Declaring a character array outside of K_THREAD_STACK_DECLARE() and
passing it to K_THREAD_CREATE
- Directly examining the stack created by K_THREAD_STACK_DECLARE()
which is not actually the memory desired and may trigger a CPU
exception
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add API that allows net-shell to get net_app context information
that can be used to debug net_app connections.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
mqtt_init's return value in the generated docs didn't format
correctly. Needs to be a space after the 0, so just delete
the comma.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Some of the networking header files in include/net/ directory were
missing @defgroup doxygen directives.
There was also duplicate @defgroup directives which are now changed
to @addtogroup directives.
Added also missing API links to doc/api/networking.rst file.
Added exceptions to .known-issues/doc/networking.conf file so that
doxygen does not complain.
Jira: ZEP-2308
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
STM32 pin configuration comments where offset by 4 bits.
Fix this issue and make pin configuration settings
easier to read.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
If peer has previously configure to received service changes indications
any changes to the database during the time it has been disconnected
shall be indicated once it reconnects:
[bt] [DBG] sc_process: (0x004065b4) start 0x000a end 0x0014
[bt] [DBG] sc_save: (0x004065b4) peer b8:8a:60:d8:17:d7 (public)
start 0x000a end 0x0014
[bt] [DBG] bt_gatt_connected: (0x00405240) conn 0x00405aa0
[bt] [DBG] gatt_ccc_changed: (0x00405240) ccc 0x00400b30 value 0x0002
[bt] [DBG] sc_ccc_cfg_changed: (0x00405240) value 0x0002
[bt] [DBG] sc_restore: (0x00405240) peer b8:8a:60:d8:17:d7 (public)
start 0x000a end 0x0014
[bt] [DBG] sc_process: (0x004065b4) start 0x000a end 0x0014
[bt] [DBG] gatt_indicate: (0x004065b4) conn 0x00405aa0 handle 0x0008
[bt] [DBG] sc_indicate_rsp: (0x00405240) err 0x00
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This commit adds http_client_set_net_pkt_pool() function that allows
caller to define net_buf pool that is used when sending a TCP packet.
This is needed for those technologies like Bluetooth or 802.15.4 which
compress the IPv6 header during send.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit adds http_server_set_net_pkt_pool() function that allows
caller to define net_buf pool that is used when sending a TCP packet.
This is needed for those technologies like Bluetooth or 802.15.4 which
compress the IPv6 header during send.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
CONFIG_MQTT_LIB_TLS is introduced to enable TLS support.
Also, prj_frdm_k64f_tls.conf is added to demostrate the whole idea.
jira:ZEP-2261
Signed-off-by: Aska Wu <aska.wu@linaro.org>
Use net app API since we want to enable MQTT with TLS.
mqtt_connect() and mqtt_close() are added to build and close the
connection to the broker. The caller doesn't need to deal with
the net context anymore and the most of network setup code in
mqtt_publisher is removed.
Signed-off-by: Aska Wu <aska.wu@linaro.org>
Normally network interface is always UP, but Bluetooth
interfaces are down until connected. So if this is the case,
then check the interface status before trying to access variables
that are NULL. This was seen with "net iface" shell command when
BT was enabled.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add needed uart pinctrl configuration in pinmux node.
This is done thanks to <soc>-pinctrl.dtsi file matching
the <soc>.dtsi files
Populate stm32 f4 based boards dts files with references
to uart pinctrl nodes.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add pinmux yaml file and bindings before introduction
of pinmux node in stm32 soc device tree files
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
* Fix the indentation which was caused by uint32_t -> u8_t changes.
* Make sure there is no unused variable warning if debugging is
enabled but debug level is low.
* Add assert that checks that Imax_abs is > 0 which it should be.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Subsequent patches will set this guard page as unmapped,
triggering a page fault on access. If this is due to
stack overflow, a double fault will be triggered,
which we are now capable of handling with a switch to
a know good stack.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Each member of the array may need to have a padding size added
such that the base address of each array element corresponds to
the desired stack alignment.
This would mean that sizeof(some array element) would return
a larger size than what was originally provided.
This won't cause problems at runtime since the space is really
there, but for users who are only enabling this padding for
debug features, they may be surprised when their stacks are
effectively smaller than when this was enabled.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We now create a special IA hardware task for handling
double faults. This has a known good stack so that if
the kernel tries to push stack data onto an unmapped page,
we don't triple-fault and reset the system.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We will need this for stack memory protection scenarios
where a writable GDT with Task State Segment descriptors
will be used. The addresses of the TSS segments cannot be
put in the GDT via preprocessor magic due to architecture
requirments that the address be split up into different
fields in the segment descriptor.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This has one use-case: configuring the double-fault #DF
exception handler to do an IA task switch to a special
IA task with a known good stack, such that we can dump
diagnostic information and then panic.
Will be used for stack overflow detection in kernel mode,
as otherwise the CPU will triple-fault and reset.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add "clocks" property on u(s)arts nodes on stm32 socs
Add a dt clocks binding file and rework clock_control
header file include new device tree binding file.
include/dt-bindings folder is introduced as dt-bindings
placeholder
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add an initial implementation for the Bluetooth Mesh Profile
Specification. The main code resides in subsys/bluetooth/host/mesh and
the public API can be found in include/bluetooth/mesh.h. There are a
couple of samples provided as well under samples/bluetooth and
tests/bluetooth.
The implementation covers all layers of the Bluetooth Mesh stack and
most optional features as well. The following is a list of some of
these features and the c-files where the implementation can be found:
- GATT & Advertising bearers (proxy.c & adv.c)
- Network Layer (net.c)
- Lower and Upper Transport Layers (transport.c)
- Access Layer (access.c)
- Foundation Models, Server role (health.c & cfg.c)
- Both PB-ADV and PB-GATT based provisioning (prov.c)
- Low Power Node support (lpn.c)
- Relay support (net.c)
- GATT Proxy (proxy.c)
Notable features that are *not* part of the implementation:
- Friend support (initial bits are in place in friend.c)
- Provisioner support (low-value for typical Zephyr devices)
- GATT Client (low-value for typical Zephyr devices)
Jira: ZEP-2360
Change-Id: Ic773113dbfd84878ff8cee7fe2bb948f0ace19ed
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
A user space buffer must be validated before required operation
can proceed. This API will check the current MMU
configuration to determine if the buffer held by the user is valid.
Jira: ZEP-2326
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
K_POLL_MODE_INFORM_ONLY was renamed to K_POLL_MODE_NOTIFY_ONLY, but
stale use was in a docstring.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
poll() allows to (efficiently) wait for available data on sockets,
and is essential operation for working with non-blocking sockets.
This is initial, very basic implementation, effectively supporting
just POLLIN operation. (POLLOUT implementation is dummy - it's
assumed that socket is always writable, as there's currently no
reasonable way to test that.)
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This needs to be in <arch/cpu.h> so that it can be called
from the k_panic()/k_oops() macros in kernel.h.
Fixes build errors on these arches when using k_panic() or
k_oops().
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Document clearly how and in what context, the various callbacks
in net_context API are being called.
Jira: ZEP-2352
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
_FILE_PATH_HASH appears to be a legacy Diab-ism that doesn't
expand to anything in GCC.
As a result, when linking the combined binary, it's quite
possible that objects in separate C files would be merged
instead of truly being in their own section. This can confound
--gc-sections and result in unused objects still being in
the final binary if one of the other objects with the same
generated section name was actually used.
We instead just use __FILE__. This results in sometimes absurdly-
long section names in the intermediate .o files, but there is no
actual limit to how long section names in ELF binaries can be;
they are not stored directly in headers but instead referenced
as an offset in the .shstrtab section, which has all the section
names stored in it.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Different areas of memory will need to have different access
policies programmed into the MMU. We introduce MMU page alignment
to the following areas:
- The boundaries of the image "ROM" area
- The beginning of RAM representing kernel datas/bss/nonit
- The beginning of RAM representing app datas/bss/noinit
Some old alignment directives that are no longer necessary have
been removed.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
1) start/end addresses for rodata
2) size of image ROM area
3) size of RAM (not including rodata/text) up to the limit of
physical memory
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
According to RFC7959 page 30, "The end of a block-wise transfer is
governed by the M bits in the Block options, _not_ by exhausting the
size estimates exchanges."
Therefore, we should check the M bit instead of total size (which
is not always available, too)
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
These special kernel sections represent arrays of kernel objects than
are iterated over at runtime to perform initialization.
The code expects all the data in these sections to be in the form of an
array of that section type, with each element sizeof(type) bytes apart.
Unfortunately, the linker sometimes has other plans and in some cases
was defaulting to aligning the data to some large power-of-two value,
such as 64 bytes. This causes any attempt to iterate over these sections
to fail as they are not a proper array.
Use the ld SUBALIGN() directive to force the alignment of these input
sections to 4 bytes.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Upcoming memory protection features will be placing some additional
constraints on kernel objects:
- They need to reside in memory owned by the kernel and not the
application
- Certain kernel object validation schemes will require some run-time
initialization of all kernel objects before they can be used.
Per Ben these initializer macros were never intended to be public. It is
not forbidden to use them, but doing so requires care: the memory being
initialized must reside in kernel space, and extra runtime
initialization steps may need to be peformed before they are fully
usable as kernel objects. In particular, kernel subsystems or drivers
whose objects are already in kernel memory may still need to use these
macros if they define kernel objects as members of a larger data
structure.
It is intended that application developers instead use the
K_<object>_DEFINE macros, which will automatically put the object in the
right memory and add them to a section which can be iterated over at
boot to complete initiailization.
There was no K_WORK_DEFINE() macro for creating struct k_work objects,
this is now added.
k_poll_event and k_poll_signal are intended to be instatiated from
application memory and have not been changed.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This patch splits out the application data and bss from the
rest of the kernel. Choosing CONFIG_APPLICATION_MEMORY will
result in the application and kernel being split.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
The I2C Slave Read support isn't well defined and not actually supported
by any i2c driver at this point. We can add this back when slave mode
is more thought out.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Remove NET_TCP_HDR() macro as we cannot safely access TCP header
via it if the network packet header spans over multiple net_buf
fragments.
Fixed also the TCP unit tests so that they pass correctly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove NET_UDP_HDR() macro as we cannot safely access UDP header
via it if the network packet header spans over multiple net_buf
fragments.
Fixed also the UDP unit tests so that they pass correctly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove NET_ICMP_HDR() macro as we cannot safely access ICMP header
via it if the network packet header spans over multiple net_buf
fragments.
Jira: ZEP-2306
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
No need to print errors if assinging null values into net_buf
pools as this is a normal condition if those pools are not used.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The worst-case maximum number of CCC entries we need is actually
MAX_CONN + MAX_PAIRED. Provide a helper define for it and use it
whenever appropriate.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The HCI Read Remote Version Information Complete event structure was
incorrect, leading to qualification test failures. This patch fixes the
structure and also the storing of the data in an endianness-agnostic
manner.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Correctly filter out the Authenticated Payload Timeout Expired event
based on the bit present on page 2 of the Event Mask.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
In order to be able to filter events present in Page 2 of the Event
Mask, this command allows the Host to set the Page 2 of the bitmask
through the corresponding command.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add a SPI master and slave driver for the L4, F4 and F3 STM32
SoCs families.
Change-Id: I1faf5c97f992c91eba852fd126e7d3b83158993d
Origin: Original
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Tested-by: Lee Jones <lee.jones@linaro.org>
Some drivers would need some specific configuration flags,
re-introduce a vendor specific field for this purpose.
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
The network application API is a higher level API for creating
client and server type applications. Instead of applications
dealing with low level details, the network application API
provides services that most of the applications can use directly.
This commit removes the internal net_sample_*() API and converts
the existing users of it to use the new net_app API.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In some cases applications may want better control of advertising
instead of the stack doing automated re-enablement. Introduce a new
option that can be used to do more "manual" advertising control.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Implements CONFIG_APPLICATION_MEMORY for x86. Working in
XIP and non-XIP configurations.
This patch does *not* implement any alignment constraints
imposed by the x86 MMU, such enabling will be done later.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Applications will have their own BSS and data sections which
will need to be additionally copied.
This covers the common C implementation of these functions.
Arches which implement their own optimized versions will need
to be updated.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is conditionally defined based on whether we are splitting
the application from the kernel, and is used for specifying
kernel input sections based on input files.
The kernel output sections will get matching input sections only
in libzephyr.a and kernel/lib.a.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
As explained in the docstrings, a usecase behind these operations is
when other container objects are put in a fifo. The typical
processing iteration make take just some data from a container at
the head of fifo, with the container still being kept at the fifo,
unless it becomes empty, and only then it's removed. Similarly with
adding more data - first step may be to try to add more data to a
container at the tail of fifo, and only if it's full, add another
container to a fifo.
The specific usecase these operations are added for is network
subsystem processing, where net_buf's and net_pkt's are added
to fifo.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
By moving user_data member at the beginning of structure. With
refcount at the beginning, reliable passsing of contexts via
FIFO was just impossible. (Queuing contexts to a FIFO is required
for BSD Sockets API).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
With CONFIG_NET_SOCKETS_POSIX_NAMES=y, "raw" POSIX names like
socket(), recv(), close() will be exposed (using macro defines).
The close() is the biggest culprit here, because in POSIX it
applies to any file descriptor, but in this implementation -
only to sockets.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Two changes are required so far:
* There's unavoidable need to have a per-socket queue of packets
(for data sockets) or pending connections (for listening sockets).
These queues share the same space (as a C union).
* There's a need to track "EOF" status of connection, synchronized
with a queue of pending packets (i.e. EOF status should be processed
only when all pending packets are processed). A natural place to
store it per-packet then, and we had a "sent" bit which was used
only for outgoing packets, recast it as "eof" for incoming socket
packets.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This adds Kconfig and build infrastructure and implements
zsock_socket() and zsock_close() functions.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
patch adds necessary files and does the modification to the existing
files to add device support for x86 based intel quark microcontroller
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
During the conversion of uint16_t to u16_t the value field of these
structs was not aligned properly.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Rename bt_gatt_unregister_service to bt_gatt_service_unregister to be
consistent with other APIs such as bt_gatt_service_register.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This initial commit adds the following:
* Handling of privacy HCI commands
* New Link Layer filter module for both whitelist and resolving list
* Advertising RPA generation with timeouts
Follow-up commits will expand the functionality.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This is unmaintained and currently has no known users. It was
added to support a Wind River project. If in the future we need it
again, we should re-introduce it with an exception-based mechanism
for catching out-of-bounds memory queries from the debugger.
The mem_safe subsystem is also removed, it is only used by the
GDB server. If its functionality is needed in the future, it
shoudl be replaced with an exception-based mechanism.
The _image_{ram, rom, text}_{start, end} linker variables have
been left in place, they will be re-purposed and expanded to
support memory protection.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The porting of the TI CC2650 SoC introduces the need to
write a specific configuration area (CCFG) at the end of the
flash. It is read by the bootloader ROM of the SoC.
For now, this is a quick hack and not a generic solution;
similar needs may arise with other hardware.
Signed-off-by: Geoffrey Le Gourriérec <geoffrey.legourrierec@smile.fr>
Clearing fields in the region descriptor attributes doesn't always have
the expected effect of revoking permissions. In the case of bus master
supervisor mode fields (MxSM), setting to zero actually enables read,
write, and execute access.
When we reworked handling of region descriptor 0, we inadvertently
enabled execution from RAM by clearing the MxSM fields and enabling the
descriptor. This caused samples/mpu_test run to throw a usage fault
instead of an MPU-triggered bus fault.
Fix this by setting all the MxSM fields to 2'b11, which gives supervisor
mode the same access as user mode.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
We need to make sure that __NVIC_PRIO_BITS & CONFIG_NUM_IRQ_PRIO_BITS
are set to the same value. Add a simple build time check to ensure
this is the case. This is to catch future cases of issues like
ZEP-2243. This is a stop gap til we resolve ZEP-2262, which covers use
of both __NVIC_PRIO_BITS & CONFIG_NUM_IRQ_PRIO_BITS.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Moving the net_buf_pool objects to a dedicated area lets us access
them by array offset into this area instead of directly by pointer.
This helps reduce the size of net_buf objects by 4 bytes.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Misspelled @brief and a couple names were different than
what was in the doxygen comments (generated warnings)
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
With the introduction of Service Changed support it is now possible to
unregister services at runtime.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds bt_gatt_register_service using bt_gatt_service which contains
the attribute array that is then added to the database saving a pointer
in each and every attribute declared.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
GATT is mandatory service and now that the db can only be build
dynamically there is no reason to keep the applications registering it.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Removes CONFIG_BLUETOOTH_GATT_DYNAMIC_DB in preparation to the
introduction of bt_gatt_unregister.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The Bluetooth subsystem assumes execution of its system threads in
cooperative priority, including the system workqueue and the thread
that interact with the controller (i.e. calling bt_send). This commit
adds a compile-time check for the system workqueue priority and
documentation for the bt_send API call.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The original description seems copied from zoap_pending_received().
Correct the description to reflect what it does actually
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
This API no longer blocks and if the credits are not available
buf will be queued and will be sent once credits are recieved
from peer.
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Macro is used to create a structure to specify the boot time
page table configuration. Needed by the gen_mmu.py script to generate
the actual page tables.
Linker script is needed for the following:
1. To place the MMU page tables at 4KByte boundary.
2. To keep the configuration structure created by
the Macro(mentioned above).
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
From
http://pubs.opengroup.org/onlinepubs/7908799/xns/netinetin.h.html:
in_addr_t
An unsigned integral type of exactly 32 bits.
[] the in_addr structure [] includes at least the following member:
in_addr_t s_addr
In other words, POSIX requires s_addr to be a single integer value,
whereas Zephyr defines it as an array, and then access as s_addr[0]
everywhere. Fix that by following POSIX definition, which helps to
port existing apps to Zephyr.
Jira: ZEP-2264
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This adds shell_exec which can be used to execute commands directly
without the use of a console which is useful for both testing as well
as interfacing with applications/upper layer which would like to have
access to shell commands directly.
In addition to that this may be more trivial to interface with instead
of using fifos like uart_register_input and telnet_register_input do.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The existing __stack decorator is not flexible enough for upcoming
thread stack memory protection scenarios. Wrap the entire thing in
a declaration macro abstraction instead, which can be implemented
on a per-arch or per-SOC basis.
Issue: ZEP-2185
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add a macro which signals to the compiler that use of the macro is
deprecated.
Example:
#define FOO __DEPRECATED_MACRO bar
Defines FOO to 'bar' but emits a warning if used in code.
Cannot filter out with -Wno-deprecated, so be careful with -Werror.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The "net http monitor" command turns on HTTP monitoring,
which means that for each incoming HTTP or HTTPS request,
a information about source and destination address, and
the HTTP request URL is printed.
User can disable the monitoring by "net http" command.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If CONFIG_NET_DEBUG_HTTP_CONN is enabled, then start to collect
currently active HTTP connections to HTTP server.
This is only useful for debugging the HTTP connections.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add HTTPS support into http-client library. The init of the
HTTPS client connection is different compared to HTTP client,
but the actual HTTP request sending is using the same API as
HTTP client.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is done so that both http_client and http_server functionality
can share the same heap.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Fixes an issue where if a thread calls k_panic() or k_oops()
with interrupts locked, control would return to the thread
and it would only be aborted after interrupts were unlocked
again.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The REGION bits (bit[3:0]) of MPU_RBAR register can specify the number
of the region to update if the VALID bit (bit[4]) is also set.
If the bit[3:0] of "region_addr" are not zero, might cause to update
unexpected region. This could happen since we might not declare stack
memory with specific alignment.
This patch will mask the bit[4:0] of "region_addr" to prevent updating
unexpected region.
Signed-off-by: Chunlin Han <chunlin.han@linaro.org>
Inserting the IDT results in any data afterwards being shifted.
We want the memory addresses between the zephyr_prebuilt.elf
and zephyr.elf to be as close as possible. Insert some dummy
data in the linker script the same size as the gen_idt data
structures. Needed for forthcoming patches which generate MMU
page tables at build time.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Following introduction of stm32cube LL based clock control driver,
remove references to former native driver.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Calling 'svc' on ARMv6 causes a hard fault if interrups are locked.
Force them unlocked before making the svc call.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Instead of NULL terminated buffer arrays, let's add a parameter for each
that tells the number of spi_buf in it.
It adds a little bit more complexity in driver's side (spi_context.h)
but not on user side (bufer one has to take care of providing the NULL
pointer at the end of the array, now he requires to give the count).
This will saves a significant amount of bytes in more complex setup than
the current dumb spi driver sample.
Fix and Use size_t everywhere (spi_context.h was using u32_t).
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
As they are part of interrupt-driver API, they must be called from
an ISR. That means that calling it outside IST may not have a desired
effect, and vice-versa, not calling them from ISR can lead to issues.
The patch also eleborates/fixes description of uart_irq_rx_ready().
Jira: ZEP-2016
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
In order to properly queue request there need to be a bt_att_req
storage but none of the calls to gatt_write_ccc were using the params
causing gatt_send to use bt_att_send and not bt_att_req_send.
To fix this now all the callers of gatt_write_ccc do set the params
properly but this means that bt_gatt_unsubscribe has to wait for it
to be completed before the application can reuse the
bt_gatt_subscribe_params.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This enables modules to define its own prompt handler instead of always
using the default_module_prompt.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Ethernet on K64F is connected via Logical Bus Master 3.
Section 19.3.8 of K64F reference manual establishes bits 20-18
(M3UM) on page 427 as "Bus Master 3 User Mode Access Control".
To fix RWX user mode access via Bus Master 3 when MPU is enabled,
we need to add these bits to the MPU region descriptors.
This fixes ETH0 on K64F when MPU is enabled.
Fix recommended by Maureen Helm <maureen.helm@nxp.com>
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Let's clarify what bits are being set by removing magic numbers in the
MPU READ/WRITE/EXECUTE User Mode and Supervisor Mode defines.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
This patch add arm core MPU support to NXP MPU driver.
With this feature it is now possible to enable stack guarding on NXP
MPUs.
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Allow the caller to delay the closing of the HTTP connection
for a number of milliseconds. The purpose for this is that
the client can send still some data back to us for a short
period of time.
This is needed for example for Basic authentication so that
server is able to receive authentication values back.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
EEPROM read mode is a specific mode where the controller will TX a
command to the slave, and once done, will read as many bytes requested.
The gain relies in the controller generating all necessary dummy bytes
by itself to read data the from slave, it will only generate RX
interrupts. Thus reducing CPU work.
Obviously TX and RX buffers should be relevantly provided by the user.
If not supported by the controller, the driver can still work (it will
have to generate the dummy bytes) and thus -EINVAL should not be
returned for that configuration bit.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
SPI_HOLD_ON_CS can be used to ask the SPI device to keep CS on, after
the transaction. And this undefinitely, until another config is used.
This will inhibate the gpio cs delay, if any. This might be useful when
doing consecutive calls on one slave without releasing the CS.
SPI_LOCK_ON is to be used with caution as it will keep the SPI device
locked for the current config being used after each transaction. This
can be necessary if one needs to do consecutive calls on a slave without
any olher caller to interfere.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Adding a struct k_poll_signal parameter to driver's API unique
exposed function.
If not NULL, the call will be handled as asynchronous and will
return right after the transaction has started, on the contrary
of current logic where is waits for the transaction to finish
(= synchronous).
In order to save stack, let's move the device pointer to struct
spi_config. So the call is still at a maximum of 4 parameters.
Adapting spi_dw.c and spi driver sample to the change so it still
builts.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Such API improves many aspects of the former API by reducing the number
of function, allowing more buffer flexibility etc... This leads in
better memory usag and performance as well.
However, as this will take sometime to get into use, the former API is
still present and is the one enabled by default.
Jira: ZEP-852
Jira: ZEP-287
Jira: ZEP-1725
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
One liners if/for/while statements still need {}
(and line break are cheap for clarity).
Aligning parameters properly.
Also, removing __func__ usage from SYS_LOG_* as these macros already put
it internally.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Here are the main changes:
* board: Update EMSK onboard resources such as Button, Switch and LEDs
+ update soc.h for em7d, em9d, em11d
+ update board.h for em_starterkit board
* arc: Add floating point support and code density support
+ add kconfig configuration
+ add compiler options
+ add register definitions, marcos, assembly codes
+ fixes in existing codes and configurations.
* arc: Update detailed board configurations for cores of emsk 2.3
* script: Provide arc_debugger.sh for debugging em_starterkit board
+ make BOARD=em_starterkit debug
This will start openocd server for emsk, and arc gdb will connect
to this debug server, user can run `continue` command if user just
want to run the application, or other commands if debugging needed.
+ make BOARD=em_starterkit debugserver
This will start an openocd debugger server for emsk, and user can
connect to this debugserver using arc gdb and do what they want to.
+ make BOARD=em_starterkit flash
This will download the zephyr application elf file to emsk,
and run it.
Signed-off-by: Huaqi Fang <huaqi.fang@synopsys.com>
This patch add arm core MPU support to ARM MPU driver.
Change-Id: I5a61da4615ae687bf42f1c9947e291ebfd2d2c1d
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
This patch adds the arm core MPU interface, a common way to access the
pu functionalities by the arm zephyr kernel.
The interface can be divided in two parts:
- a core part that will be implemented by the arm_core_mpu driver and
used directly by the kernel
- a driver part that will be implemented by the mpu drivers and used by
the arm_core_mpu driver
Change-Id: I590bd284abc40d98b06fdf1efb5800903313aa00
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
This patch adds initial MPU support to NXP K6x family.
The boot configuration prevents the following security issues:
* Prevent to read at an address that is reserved in the memory map.
* Prevent to write into the boot Flash/ROM.
* Prevent from running code located in SRAM.
This driver has been tested on FRDM-K64F.
Change-Id: I907168fff0c6028f1c665f1d3c224cbeec31be32
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
RFC793, "Transmission Control Protocol", defines sequence numbers
just as 32-bit numbers without a sign. It doesn't specify any adhoc
rules for comparing them, so standard modular arithmetic should be
used.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This patch amounts to a mostly complete rewrite of the k_mem_pool
allocator, which had been the source of historical complaints vs. the
one easily available in newlib. The basic design of the allocator is
unchanged (it's still a 4-way buddy allocator), but the implementation
has made different choices throughout. Major changes:
Space efficiency: The old implementation required ~2.66 bytes per
"smallest block" in overhead, plus 16 bytes per log4 "level" of the
allocation tree, plus a global tracking struct of 32 bytes and a very
surprising 12 byte overhead (in struct k_mem_block) per active
allocation on top of the returned data pointer. This new allocator
uses a simple bit array as the only per-block storage and places the
free list into the freed blocks themselves, requiring only ~1.33 bits
per smallest block, 12 bytes per level, 32 byte globally and only 4
bytes of per-allocation bookeeping. And it puts more of the generated
tree into BSS, slightly reducing binary sizes for non-trivial pool
sizes (even as the code size itself has increased a tiny bit).
IRQ safe: atomic operations on the store have been cut down to be at
most "4 bit sets and dlist operations" (i.e. a few dozen
instructions), reducing latency significantly and allowing us to lock
against interrupts cleanly from all APIs. Allocations and frees can
be done from ISRs now without limitation (well, obviously you can't
sleep, so "timeout" must be K_NO_WAIT).
Deterministic performance: there is no more "defragmentation" step
that must be manually managed. Block coalescing is done synchronously
at free time and takes constant time (strictly log4(num_levels)), as
the detection of four free "partner bits" is just a simple shift and
mask operation.
Cleaner behavior with odd sizes. The old code assumed that the
specified maximum size would be a power of four multiple of the
minimum size, making use of non-standard buffer sizes problematic.
This implementation re-aligns the sub-blocks at each level and can
handle situations wehre alignment restrictions mean fewer than 4x will
be available. If you want precise layout control, you can still
specify the sizes rigorously. It just doesn't break if you don't.
More portable: the original implementation made use of GNU assembler
macros embedded inline within C __asm__ statements. Not all
toolchains are actually backed by a GNU assembler even when the
support the GNU assembly syntax. This is pure C, albeit with some
hairy macros to expand the compile-time-computed values.
Related changes that had to be rolled into this patch for bisectability:
* The new allocator has a firm minimum block size of 8 bytes (to store
the dlist_node_t). It will "work" with smaller requested min_size
values, but obviously makes no firm promises about layout or how
many will be available. Unfortunately many of the tests were
written with very small 4-byte minimum sizes and to assume exactly
how many they could allocate. Bump the sizes to match the allocator
minimum.
* The mbox and pipes API made use of the internals of k_mem_block and
had to be ported to the new scheme. Blocks no longer store a
backpointer to the pool that allocated them (it's an integer ID in a
bitfield) , so if you want to "nullify" them you have to use the
data pointer.
* test_mbox_api had a bug were it was prematurely freeing k_mem_blocks
that it sent through the mailbox. This worked in the old allocator
because the memory wouldn't be touched when freed, but now we stuff
list pointers in there and the bug was exposed.
* Remove test_mpool_options: the options (related to defragmentation
behavior) tested no longer exist.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This commit creates a HTTP server library. So instead of creating
a complex HTTP server application for serving HTTP requests, the
developer can use the HTTP server API to create HTTP server
insteances. This commit also adds support for creating HTTPS servers.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This helper copies desired amount of data from network packet
buffer info a user provided linear buffer.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
For various reasons its often necessary to generate certain
complex data structures at build-time by separate tools outside
of the C compiler. Data is populated to these tools by way of
special binary sections not intended to be included in the final
binary. We currently do this to generate interrupt tables, forthcoming
work will also use this to generate MMU page tables.
The way we have been doing this is to generatea "kernel_prebuilt.elf",
extract the metadata sections with objcopy, run the tool, and then
re-link the kernel with the extra data *and* use objcopy to pull
out the unwanted sections.
This doesn't scale well if multiple post-build steps are needed.
Now this is much simpler; in any Makefile, a special
GENERATED_KERNEL_OBJECT_FILES variable may be appended to containing
the filenames to the generated object files, which will be generated
by Make in the usual fashion.
Instead of using objcopy to pull out, we now create a linker-pass2.cmd
which additionally defines LINKER_PASS2. The source linker script
can #ifdef around this to use the special /DISCARD/ section target
to not include metadata sections in the final binary.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
uart_irq_tx_empty() function proved to be problematic: its semantics
was not documented properly, and many hardware uses terminology like
"TX register empty" to signify condition of TX register being ready
to accept another character (what in Zephyr is tested with
uart_irq_tx_ready()). To avoid confusion, uart_irq_tx_empty() was
renamed to uart_irq_tx_complete(), propagating to drivers/serial
device methods.
The semantics and usage model of all of uart_irq_rx_ready(),
uart_irq_tx_ready(), uart_irq_tx_complete() is now described in
detail.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
A half of params were described as "pointer on" (pretty strange
sounding), another half - "pointer to". Use the latter consistently.
Also, minor wording and punctuation changes.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Since more and more code is going to be reused by both the Host and the
Controller, this commit introduces a common/ folder that will contain
everything that is not tied to one of the two components but shared by
them.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The computation of unused stack space is now split off from the function
which sends the result to printk().
The code now assumes that the struct k_thread is stored elsewhere.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Unline k_thread_spawn(), the struct k_thread can live anywhere and not
in the thread's stack region. This will be useful for memory protection
scenarios where private kernel structures for a thread are not
accessible by that thread, or we want to allow the thread to use all the
stack space we gave it.
This requires a change to the internal _new_thread() API as we need to
provide a separate pointer for the k_thread.
By default, we still create internal threads with the k_thread in stack
memory. Forthcoming patches will change this, but we first need to make
it easier to define k_thread memory of variable size depending on
whether we need to store coprocessor state or not.
Change-Id: I533bbcf317833ba67a771b356b6bbc6596bf60f5
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
These are macros that are expected to be defined at all times by
the compiler. We need them at the very beginning of kernel.h for
the k_thread definition, before it's possible to include arch.h.
Make a special toolchain header for XCC compiler and place these
defines in there. Otherwise inherit all the other GCC defines.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Currently, a queue/fifo getter chooses how long to wait for an
element. But there are scenarios when putter would know better,
there should be a way to expire getter's timeout to make it run
again. k_queue_cancel_wait() and k_fifo_cancel_wait() functions
do just that. They cause corresponding *_get() functions to return
with NULL value, as if timeout expired on getter's side (even
K_FOREVER).
This can be used to signal out of band conditions from putter to
getter, e.g. end of processing, error, configuration change, etc.
A specific event would be communicated to getter by other means
(e.g. using existing shared context structures).
Without this call, achieving the same effect would require e.g.
calling k_fifo_put() with a pointer to a special sentinal memory
structure - such structure would need to be allocated somewhere
and somehow, and getter would need to recognize it from a normal
data item. Having cancel_wait() functions offers an elegant
alternative. From this perspective, these calls can be seen as
an equivalent to e.g. k_fifo_put(fifo, NULL), except that such
call won't work in practice.
Change-Id: I47b7f690dc325a80943082bcf5345c41649e7024
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
LE Set PHY command parameters take bit numbers, fix
definition values to comply to bit number values.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added HCI macros to check LE Features. Also, added test
macros for 2M and Coded PHY support in HCI Controller.
Earlier a common test macro was used between BR/EDR and LE,
but since LE features do not use pages for feature, an
explicit macro for testing LE feature is added now.
Also, features field in LE device structure is now a single
dimension array of 8 octets.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Instead of separate sample application that does everything
related to HTTP client connectivity, create a HTTP client library
that hides nasty details that are related to sending HTTP methods.
After this the sample HTTP client application is very simple and
only shows how to use the client HTTP API.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The Bluetooth Specification allows for optional Controller to Host flow
control based on the same credit-based mechanism as the Host to
Controller one. This is particularly useful in 2-chip solutions where
the Host and the Controller are connected via a physical link (UART, SPI
or similar) where the Host is sometimes required to ask the Controller
to throttle its data traffic while still making sure that relevant
events get through the line.
This implementation is based on a simple queue of pending events and
data that is populated whenever the Controller detects that the Host is
out of buffers and then emptied whenever the Host notifies the
Controller that is ready to receive data again. Events relevant to the
connections are also queued to preserve the order of arrival.
At this point the Controller ignores the connection handle sent by the
Host and treats all connections equally, and it also queues events even
for connections that have no data pending in the queue. Both this items
can be improved if necessity arises.
Note that Number of Completed Packets will still flow freely from the
Controller to the Host regardless of the pending ACL data packets, which
might lead to inconsistencies in the sequential order of certain
operations that include bi-directional data transfer.
Jira: ZEP-1735
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Rename occurences of bt_hci_ev_* to more widely used
bt_hci_evt_* namespace.
Change-id: I742fb86f8f835a0f6072638e1e997ad08891d43d
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
The switch from C99 integer types to u16_t, etc. caused misalignment
in structs and function definitions with multi-line parameter lists.
Change-Id: Ic0e33dc199f834ad7772417bca4c0b2d2f779d15
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This is mostly resulting from the recent change to new integer types.
Change-Id: I16aa4ca645c24d682667985de14687a7dc360b2f
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We don't use __scs or __scp anymore so we can remove the related linker
script and various defines and such associated with them.
Change-Id: Ibbbe27c23a3f2b816b992dfdeb4f80cf798e0d40
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Following activation of stm32 common clock driver for stm32f4 series
remove references to stm32f4 specific driver.
Change-Id: I372a0ea046007bcb34944d6b2b8880077583b1d3
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
CC3220SF_LAUNCHXL effectively replaces the CC3200_LAUNCHXL,
with support for the CC3220SF SoC, which is an update for
the CC3200 SoC.
This is supported by the Texas Instruments CC3220 SDK.
Jira: ZEP-1958
Change-Id: I2484d3ee87b7f909c783597d95128f2b45db36f2
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Using MPU enabled HW it was evident that a NULL access
(with offset) was happening in the TCP stack due to the
following message:
***** MPU FAULT *****
Executing thread ID (thread): 0x20009b0c
Faulting instruction address: 0x8034496
Data Access Violation
Address: 0x34
Fatal fault in essential thread! Spinning...
Turns out we are referencing a potentially de-referenced
NULL pointer in the SYS_SLIST_PEEK_NEXT_CONTAINER macro.
Let's avoid this by checking the container node for NULL.
Also fix dlist.h SYS_DLIST_PEEK_NEXT_CONTAINER with the same
issue.
Change-Id: I2e765b9af7bcaf8fb13f7c9b7e081f9e6d4928f2
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Many OSes use values SOCK_STREAM = 1, SOCK_DGRAM = 2, apparently
inherited from the original BSD Unix, which introduced Sockets API.
These values are exposed as numbers in many places, e.g. with a
debugger, when printing just as numbers, etc., so use the above
common values to avoid possible confusion.
Jira: ZEP-2066
Change-Id: I0477abc79e2b43ef83f9fb11a66092f2b41f75fa
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The ai_flags, ai_socktype and ai_protocol fields are removed as there
is currently no use for them. These can be added back later if really
needed.
Reordering the fields at the same time which caused 4 bytes to be saved
in storage space.
Jira: ZEP-2065
Change-Id: Ida1dcfb6afed73733d3db9cf4d07e771d31ee314
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
For stream-based protocols (TCP), adding less data than requested
("short write") is generally not a problem - the rest of data can
be sent in the next packet. So, make net_pkt_append() return length
of written data instead of just bool flag, which makes it closer
to the behavior of POSIX send()/write() calls.
There're many users of older net_pkt_append() in the codebase
however, so net_pkt_append_all() convenience function is added which
keeps returning a boolean flag. All current users were converted to
this function, except for two:
samples/net/http_server/src/ssl_utils.c
samples/net/mbedtls_sslclient/src/tcp.c
Both are related to TLS and implement mbedTLS "tx callback", which
follows POSIX short-write semantics. Both cases also had a code to
workaround previous boolean-only behavior of net_pkt_append() - after
calling it, they measured length of the actual data added (but only
in case of successful return of net_pkt_append(), so that didn't
really help). So, these 2 cases are already improved.
Jira: ZEP-1984
Change-Id: Ibaf7c029b15e91b516d73dab3612eed190ee982b
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
When connect to diffrent router with the same gateway ip address,
need to clear arp cache when disable interface,
or it will use the wrong gateway mac address.
Call net_arp_clear_cache function replace to set arp_table 0.
Change-Id: Ib403a0c0030832ba48824db4d2d3fcb8add63d16
Signed-off-by: june li <junelizh@foxmail.com>
Adds event based scheduling logic to the kernel. Updates
management of timeouts, timers, idling etc. based on
time tracked at events rather than periodic ticks. Provides
interfaces for timers to announce and get next timer expiry
based on kernel scheduling decisions involving time slicing
of threads, timeouts and idling. Uses wall time units instead
of ticks in all scheduling activities.
The implementation involves changes in the following areas
1. Management of time in wall units like ms/us instead of ticks
The existing implementation already had an option to configure
number of ticks in a second. The new implementation builds on
top of that feature and provides option to set the size of the
scheduling granurality to mili seconds or micro seconds. This
allows most of the current implementation to be reused. Due to
this re-use and co-existence with tick based kernel, the names
of variables may contain the word "tick". However, in the
tickless kernel implementation, it represents the currently
configured time unit, which would be be mili seconds or
micro seconds. The APIs that take time as a parameter are not
impacted and they continue to pass time in mili seconds.
2. Timers would not be programmed in periodic mode
generating ticks. Instead they would be programmed in one
shot mode to generate events at the time the kernel scheduler
needs to gain control for its scheduling activities like
timers, timeouts, time slicing, idling etc.
3. The scheduler provides interfaces that the timer drivers
use to announce elapsed time and get the next time the scheduler
needs a timer event. It is possible that the scheduler may not
need another timer event, in which case the system would wait
for a non-timer event to wake it up if it is idling.
4. New APIs are defined to be implemented by timer drivers. Also
they need to handler timer events differently. These changes
have been done in the HPET timer driver. In future other timers
that support tickles kernel should implement these APIs as well.
These APIs are to re-program the timer, update and announce
elapsed time.
5. Philosopher and timer_api applications have been enabled to
test tickless kernel. Separate configuration files are created
which define the necessary CONFIG flags. Run these apps using
following command
make pristine && make BOARD=qemu_x86 CONF_FILE=prj_tickless.conf qemu
Jira: ZEP-339 ZEP-1946 ZEP-948
Change-Id: I7d950c31bf1ff929a9066fad42c2f0559a2e5983
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Scheduler needs to do time slicing only if there are multiple threads
active with the same priority. This function checks if the list has
more than one node. This would be used to check the list containing
threads with same priority for multiple nodes.
Jira: ZEP-339
Change-Id: I8c7daf77a6540c642ce58a3763b26cd1e06ddc30
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
There is no need of 2 level status reporting, returned code from
synchronous call or the status code in the async callback should be
enough to tell why it did not work.
And this attribute is anyway unused anywhere.
This helps to save 4 bytes, in total, out of struct cipher_pkt.
(3 bytes were lurking around as the status attribute was only 1 byte).
Change-Id: Iadfe20d6b84d57d86683bc86203ce2ed50e40461
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
console_getchar() returns a u8_t so we need to include the definition
of that to avoid compilation errors.
Change-Id: I1f16ce7942c90555463417e23a60eaa34cb091f4
Signed-off-by: Jon Medhurst <tixy@linaro.org>
Historically, space for struct k_thread was always carved out of the
thread's stack region. However, we want more control on where this data
will reside; in memory protection scenarios the stack may only be used
for actual stack data and nothing else.
On some platforms (particularly ARM), including kernel_arch_data.h from
the toplevel kernel.h exposes intractable circular dependency issues.
We create a new per-arch header "kernel_arch_thread.h" with very limited
scope; it only defines the three data structures necessary to instantiate
the arch-specific bits of a struct k_thread.
Change-Id: I3a55b4ed4270512e58cf671f327bb033ad7f4a4f
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This patch add the Memory Protection Unit parameter to the arm core
configuration.
Change-Id: Ifee8cdd5738391a6f182e8d0382d27eeb8c546ba
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Signed-off-by: Marc Moreno <marc.morenoberengue@linaro.org>
This adds a new event type to the kernel event logger that tracks
thread-related events: being added to the ready queue, pending a
thread, and exiting a thread.
It's the only event type that contains "subevents" and thus has a
non-void parameter in their respective _sys_k_event_logger_*()
function. Luckily, as isn't the case with other events (such as IRQs
and thread switching), these functions are called from
platform-agnostic places, so there's no need to worry about changing
the assembly guts.
This is the first patch in a series adding support for better real-time
profiling of Zephyr applications.
Jira: ZEP-1463
Change-Id: I6d63607ba347f7a9cac3d016fef8f5a0a830e267
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Put the reason code in r0 and make a SVC #2 call, which will be
propagated to _fatal_error_handler as an exception.
The _is_in_isr() implementation had to be tweaked a bit. User-generated
SVC exception no longer just used for irq_offload(); just because we are
in it does not mean we are in interrupt context. Instead, have the
irq_offload code set and clear the offload_routine global; it will be
non-NULL only if it's in use. Upcoming changes to support memory
protection (which will require system calls) will need this too.
We free up some small amount of ROM deleting _default_esf struct as it's
no longer needed.
Issue: ZEP-843
Change-Id: Ie82bd708575934cffe41e64f5c128c8704ca4e48
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We reserve a specific vector in the IDT to trigger when we want to
enter a fatal exception state from software.
Disabled for drivers/build_all tests as we were up to the ROM limit
on Quark D2000.
Issue: ZEP-843
Change-Id: I4de7f025fba0691d07bcc3b3f0925973834496a0
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Unlike assertions, these APIs are active at all times. The kernel will
treat these errors in the same way as fatal CPU exceptions. Ultimately,
the policy of what to do with these errors is implemented in
_SysFatalErrorHandler.
If the archtecture supports it, a real CPU exception can be triggered
which will provide a complete register dump and PC value when the
problem occurs. This will provide more helpful information than a fake
exception stack frame (_default_esf) passed to the arch-specific exception
handling code.
Issue: ZEP-843
Change-Id: I8f136905c05bb84772e1c5ed53b8e920d24eb6fd
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is needed by application code that wants to print formatted
strings, but only has a fmt and va_list, and lacks memory to spare for
"buf" and something like:
vsnprintk(buf, sizeof(buf), fmt, ap);
printk("%s", buf);
Change-Id: Ic9cc915ec7e5f8f9492c730667f39788ecae65f6
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
GCC supports __attribute__((format (printf ...))) even when the
variadic arguments are not present. In this case, the attribute
argument specifying the start of the variadic arguments should be
zero.
Use this in printk.h to add __printf_like where it's missing.
Change-Id: I7868439d5791e391aeb07356af9819524e68c771
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
For exceptions where we are just going to abort the current thread, we
need to exit handler mode properly so that PendSV can run and perform a
context switch. For ARM architecture this means that the fatal error
handling code path can indeed return if we were 1) in handler mode and
2) only wish to abort the current thread.
Fixes a very long-standing bug where a thread that generates an
exception, and should only abort the thread, instead takes down the
entire system.
Issue: ZEP-2052
Change-Id: Ib356a34a6fda2e0f8aff39c4b3270efceb81e54d
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types. This handles the remaining includes and kernel, plus
touching up various points that we skipped because of include
dependancies. We also convert the PRI printf formatters in the arch
code over to normal formatters.
Jira: ZEP-2051
Change-Id: Iecbb12601a3ee4ea936fd7ddea37788a645b08b0
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
s/uint8_t/uint32_t
For some reason gpio_pin_configure uses a uint8_t though all other
places ask for uint32_t.
Change-Id: I50c113d71fd1d1cfba231fbc98b355b69a78dbec
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types.
Jira: ZEP-2051
Change-Id: I4ec03eb2183d59ef86ea2c20d956e5d272656837
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Only 2 attributes lacked this prefix, which makes sense to have, so
applying it accordingly and changing the helpers as well.
Change-Id: I095b2729f977f8fb1624eff8801a4a4e21416693
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Most of these macros are not exactly exposing a buffer, but a specific
header pointer (ipv6, ivp4, ethernet and so on), so it relevant to
rename them accordingly.
Change-Id: I66e32f7c3f2bc75994befb28d823e24299a53f5c
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Instead of using a bool, let's just use a bit in a bifield, shared among
various attribute. This saves space.
Make ext_len attribute enabled only on IPv6 (ipv6, icmpv6 and rpl are
the only code setting it) and reordering the helpers functions
accordingly.
Change-Id: Ifd3295d778959308ead7db9b2a59396e50f8e18c
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
IPv6 next headers are processed in a way so it is not required to store
which header has been already seen in the net_pkt, as the processing loop
can store internally which one it has seen already.
Change-Id: I266ba8a3a0081a162318cdafb474a0fc44a3185e
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is actually useless as there is only 1 RX memory slab, and thus can
be removed to reduce net_pkt structure size.
Change-Id: I62d716515120e7356ee1e2d75bbe1ec32e22c35d
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
- net_pkt becomes a stand-alone structure with network packet meta
information.
- network packet data is still managed through net_buf, mostly named
'frag'.
- net_pkt memory management is done through k_mem_slab
- function got introduced or relevantly renamed to target eithe net_pkt
or net_buf fragments.
- net_buf's sent_list ends up in net_pkt now, and thus helps to save
memory when TCP is enabled.
Change-Id: Ibd5c17df4f75891dec79db723a4c9fc704eb843d
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There have been long lasting confusion between net_buf and net_nbuf.
While the first is actually a buffer, the second one is not. It's a
network buffer descriptor. More precisely it provides meta data about a
network packet, and holds the chain of buffer fragments made of net_buf.
Thus renaming net_nbuf to net_pkt and all names around it as well
(function, Kconfig option, ..).
Though net_pkt if the new name, it still inherit its logic from net_buf.
'
This patch is the first of a serie that will separate completely net_pkt
from net_buf.
Change-Id: Iecb32d2a0d8f4647692e5328e54b5c35454194cd
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Commit "net: zoap: Fix memory overflow issue" fixed and implemented
./well-known/core response in a different way, so this api is not needed
anymore.
Change-Id: I8f945fb5842028be50ecfdef95cbe5da3189a538
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types.
Jira: ZEP-2051
Change-Id: I8f57a17f78e674aca5400f005db8975c9f9e150e
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This is a start to move away from the C99 {u}int{8,16,32,64}_t types to
Zephyr defined u{8,16,32,64}_t and s{8,16,32,64}_t. This allows Zephyr
to define the sized types in a consistent manor across all the
architectures we support and not conflict with what various compilers
and libc might do with regards to the C99 types.
We introduce <zephyr/types.h> as part of this and have it include
<stdint.h> for now until we transition all the code away from the C99
types.
We go with u{8,16,32,64}_t and s{8,16,32,64}_t as there are some
existing variables defined u8 & u16 as well as to be consistent with
Zephyr naming conventions.
Jira: ZEP-2051
Change-Id: I451fed0623b029d65866622e478225dfab2c0ca8
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
__stack is defined as a C language attribute for on-stack arrays. Don't
define it outside C source code.
This definition conflicts with __stack symbol defined in xtensa linker.ld
files.
Change-Id: I59fe34603bc2bb5732ed45c7974de5f8b25d77ed
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
This adds net_buf_reset which can be used to reset the state of a buffer.
Change-Id: I4b7c89dfd1a23a2ec8dfa3c99d5b02b9bcbceef3
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes the code attempt to allocate from the original buffer pool
before relying on le_data_pool which shall only be used as last resort
as it is configure with minimal possible buffers (1 per connection).
Change-Id: I85b581627f5c3b1bf1ee7c5fa69099c5aca13d4a
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
To avoid having to define a BIT64() macro in a public namespace, use
instead masks directly instead of bits, and also refactor the host code
so that it uses those instead of the earlier byte array with hardcoded
indices and masks.
Change-id: Ief03db616a96df65349d24289b62566a268ffdd0
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add definitions for Bluetooth 5.0 FeatureSet field's bit
mapping. Refer to Bluetooth Specification Version 5.0,
Vol.6, Part B, Section 4.6, Table 4.4.
Change-id: I5069421bf07a31ed9524fbdd02eb44079b1255cb
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
For consistency, "chan" and "param" are used wherever "channel" and
"parameters" are the words in the specification.
Change-Id: I778a8501ae6af991618c14cc6e395d765a9ae102
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add definitions for all LE commands and events added in the Bluetooth
5.0 specification.
Change-Id: Ia6d134a1ada67e98c803bb6a1708c3f4361c3bfb
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Scanning for typos in comments and strings.
Change-Id: I3d4db89e0824959252c79c19baa50028354247bd
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
We need to move using the PRI* defines to use newlib as the default libc
as different arch's define various base types like {u}int32_t
differently. To deal with that in a consistent manor we need access to
the defines in most spots for print{f,k} or logging functions.
Change-Id: Ic1fbef75cbaee211803d9aaf506056e5e31e73f3
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
When we build with newlib __printf_like is already defined so we run
into issues. We should include toolchain.h to properly handle this.
Change-Id: Ia961a9f1d3f7bf965e4115eb93a7ba6a62220905
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
sys_slist_merge_slist shall reinit the appended list not the original.
Change-Id: Iacd5244d0243b7ebdb110991574e9e1d265ced14
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The CONFIG_FLASH_LOAD_OFFSET allows the zephyr image to be placed at
an offset from the start of flash. This is useful for situations,
such as with a bootloader, to allow the image to not occupy the very
beginning of flash.
Complement this by adding a CONFIG_FLASH_LOAD_SIZE config, that can
constrain the size of the flash image. With the default of zero, the
behavior is as before, with the image allowed to occupy the rest of
the flash. It can also be defined to a non-zero value which will
constrain the image to occupy that many bytes of flash.
Although this is defined generally, it is currently only supported on
cortex-m targets.
Change-Id: I6e4a0e79c8459f931cd4757c932d20dac740f5f6
Signed-off-by: David Brown <david.brown@linaro.org>
__BYTE_ORDER__, __ORDER_BIG_ENDIAN__ and __ORDER_LITTLE_ENDIAN__ are not
defined when building with xcc, but are defined when building with gcc.
Define them conditionally.
Change-Id: Ib205ffee28360aa240d61731b7a3d6f45401b4c1
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Use UNALIGNED_GET and UNALIGNED_PUT throughout the networking stack to
access fields from the IP address structure. These structures can be
mapped directly to buffers and the macros are required for correct
unaligned memory access.
Jira: ZEP-2012
Change-Id: I55f9da7b143a22fa869d5d215c661de988cd9b91
Signed-off-by: Bogdan Davidoaia <bogdan.davidoaia@linaro.org>
net_nbuf_append_le32 helper appends le32 data to the packet, this is
needed in some Thread headers using LE data.
Change-Id: I04233ca064c2e23ec5c53979ac234adfe0ccb9dd
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This permits to tweak the TX power in dbm.
Change-Id: Idadff397941a39010ce3c374d9ca74b777934626
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This way, the driver will be able to pass the RSSI of the frame it just
received.
Change-Id: I08e7565e35b4fb087cf348bce01722ab25d59f0f
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This does not save any space but sets the fields in the
structs in more natural order. Move IPv6 related
fields in net_if into internal ipv6 struct so that all
IPv6 fields are located inside one struct. Same thing
is done for IPv4 fields which are now located inside
IPv4 internal struct in net_if.
There is no functionality changes by this commit.
Change-Id: I7d72ec0a28e2b88c79a4c294655d5ef6da6ccb25
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Shuffle the fields to different order in net_if_addr struct.
This saves space in net_if struct. This saved 4.8% memory,
640 bytes in original versus 608 bytes after this commit, when
allocating net_if using minimal amount of address counts and
IPv4, DHCPv4 and IPv6 enabled.
Change-Id: I591543cded587178cf6f82189953bb2e99c2188a
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
DNS resolving is better done with DNS resolve API so remove
the DNS client API which is quite hard to use.
Change-Id: Ide4973a5be674414ea6e04a35c938195cce40b6a
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We need a way to know when IPv6 address is successfully set
into network interface.
If IPv6 DAD (Duplicate Address Detection) succeeds or fails,
we send a management event for that. This can be used by
other components to detect when the network interface is in
usable state.
Change-Id: Ifb22415fe21f31f5dba4f55455d6e0f89b414d32
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Some of the IPv6 utility functions were missing const in
one of the parameters that are not modified by the corresponding
function.
Change-Id: Ic9fe53daac288570c14423fd9410dcf15d1c5cfa
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Layer code should be made so that masking them don't overlap with
another one in net_event code logic. Earlier it was possible to get
an IP addr event for IPv6 even though code would be only listening
for IPv4 one.
Reported-by: Xiaorui Hu <xiaorui.hu@linaro.org>
Change-Id: I8341a91d55556033dd228f68f8ca64e196f52bec
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Make sure that CONFIG_DNS_RESOLVER_MAX_SERVERS and
CONFIG_DNS_NUM_CONCUR_QUERIES are defined even if
CONFIG_DNS_RESOLVER is not enabled. This fixes compilation
error in this special case.
Change-Id: Icf1f247c138c379246ece57e78b04e70ae43cc1e
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The default hop limit is defined in struct net_if. It is possible
that user might want to tweak it for each network packet. For this
purpose, a net_nbuf_set_ipv6_hop_limit(buf) function is created.
Change-Id: I7568330358f80f0f5007d6d3c411c120b043c04f
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add the simplest possible CRC 16 function that computes the CRC value
without the help of lookup tables.
Change-Id: I9163389adaa4a70c4e8ce8ce6d5f0661f40c7871
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
This commit adds support for IPv6 packet fragmentation when
receiving (IPv6 reassembly) and when sending larger than 1280 bytes
long IPv6 packet. See RFC 2460 chapter 4.5 for more details.
Jira: ZEP-1718
Change-Id: Ia31c147cce4d456ee48f39276cca99aa09ce81d6
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add net_nbuf_split() function that can be used to split
an existing net_buf fragment into two arbitrary length pieces,
and return the two new fragments to the caller. The data from
the original fragment is copied into these two new fragments.
Existing fragment is not modified.
Change-Id: I463e675232c6e19c2a42929f480893a6d1265873
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This code is non-functional and is a left over from an old version of
the kernel that does not work and is covered through other new features
in the kernel, for example object tracing.
Jira: ZEP-2013
Change-Id: Id12ad09e2d06186b53cd2f0dd030ac6d37d1229f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This replaces custom made list manipulation with sys_slist_t which makes
the code more readable.
Change-Id: I9ee024ad83da3e28f2ecab74b001bf0e795fe489
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
HCI event masking allows the host to choose which events are reported to
it to avoid interruption and excessive traffic. This patch implements
masking to drop any non-enabled events as specified by the host.
Jira: ZEP-1769
Change-Id: If09d4aa22b0da8f743fc42a3b0db3f369daaff96
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
A initiation to send AT commands is given in the application
with prefered AT command as the argument.
This patch supports to send the command within the profile stack.
Change-Id: Id5caa3ce64070fc17e60f4ea61a8c83a961099ba
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
Document via a comment, as C doesn't allow to represent variable
length fields in a structure.
Change-Id: I7d0436eab434fc5f27a2b6e2c9a4a548ab20dbcb
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The max30101 heart rate sensor supports three types of LED channels:
red, infrared, and green. The sensor interface previously defined only a
generic "light" channel and an infrared channel, so add more specialized
red and green channels to the interface.
Jira: ZEP-720
Change-Id: I5f457c335d84cdadde71927a6eb19def3181d32a
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Both the string and image rendering may want to take advantage of
scrolling and sequential display capabilities. Consolidate the APIs so
that there's a single one for images (mb_display_image) and a single
one for strings (mb_display_print). Both take a duration parameter for
the per-frame duration as well as a mode parameter which specifies
sequential vs scrolling behavior as well as an optional looping flag.
Change-Id: Ia092d771e3f1b94afd494c7544dab988161c539e
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The comments refered to 'config' and 'config_size' as though they
were named members of the struct, which they are not, and so is a little
confusing. Delete these comments and also correctly align the text for
size and burst members.
Change-Id: Iae14c76940268b8e7d72b117c8aea5a204b3da34
Signed-off-by: Jon Medhurst <tixy@linaro.org>
It is envisaged that this will be used by SoC or board code to make
available fixed purpose memory-mapped i/o registers to the rest of the
system which normally expects to use GPIO devices, e.g. for driving chip
select lines, LEDs or reading button states.
As such, the driver code doesn't provide a kconfig based configuration
mechanism, instead SoC/board code can hard-wire the devices it wants
with something simple like:
GPIO_MMIO32_INIT(misc_reg1, "MISC1", 0x12345678, 0xffffffffu)
Then, for example, if bit N of the register at 0x12345678 is wired up as
an SPI device chip select line, the SPI driver could be configured to
use pin N of the "MISC1" GPIO driver and not need any other board
specific code.
Change-Id: Ib02fcbab73fcf9637e25834db060fb3108626f47
Signed-off-by: Jon Medhurst <tixy@linaro.org>
Removes unused k20 and k6x header files that defined peripheral
registers now covered by CMSIS.
Change-Id: Ib11b19a290c6cc4b83f1b67455145fe2b86210c8
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
_THREAD_TIMEOUT_INIT() has been replaced by _nano_timeout_thread_init(),
so it can be removed.
_THREAD_ERRNO_INIT() is defined, but never used. Ben suspects that this
is a bug, and that there should be some code that calls it.
Jira: ZEP-1326
Change-Id: I476c316b80e9f34d1ed61971229ed9afafc80d8a
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add a new mb_display_print() API which takes printf-style parameters
and outputs scrolling text instead of one character at a time. The
existing mb_display_str() API is renamed to mb_display_string() for
consistency, and now also takes printf-style parameters.
Change-Id: I59c42bcd74c62f05ecb6d097dc808b9e5c1984c5
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Adds a simple driver to access the 5x5 LED display found on BBC
micro:bit boards. The display is so limited that no effort is done to
try to integrate with the existing console (which would likely make
the display unusable). Instead, dedicated mb_display_* APIs are added
that are specific to this display.
References:
https://www.microbit.co.uk/device/screenhttps://lancaster-university.github.io/microbit-docs/ubit/display/
Jira: ZEP-1990
Change-Id: I431b5b358b5f07592a60d3aed87eaab6ac20ce25
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The SiFive Freedom E310 SOC follows the riscv privilege
architecture specification and hence is declared within
the riscv privilege SOC family.
It also provides support for a riscv
Platform Level Interrupt Controller (PLIC)
Change-Id: I19ff0997eacc248f48444fc96566a105c6c02663
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
This change introduces console_getchar() and console_getline() API
calls which can be used to get pending console input (either one
char or whole line), or block waiting for one. In this regard, they
are similar to well-known ANSI C function getchar/gets/fgets, and
are intended to ease porting of existing applications to Zephyr, and
indeed, these functions (shaped as an external module) are already
used by few applications.
The implementation of the functions is structured as a new "console"
subsystem. The intention is that further generic console code may be
pulled there instead of being in drivers/console/. Besides the
functions themselves, initialization code and sample applications
are included.
At this time, there're may limitations of how these functions can
be used. For example, console_getchar() and console_getline() are
mutually exclusive, and both are incompatible with callback
(push-style) console API (and e.g. with console shell subsystem
which uses this API). Again, the intention is to make a first step
towards refactoring console subsystem to allow more flexible
real-world usage, better reusability and composability.
Change-Id: I3f4015bb5b26e0656f82f428b11ba30e980d25a0
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This enables casting if necessary.
Change-Id: I69d537dd1082e1e5a05aa2cacdd503d3f6c1ab95
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds SYS_SLIST_PEEK_TAIL_CONTAINER macro to access the container
directly.
Change-Id: I740138a47936ebda1e0090628f4933e921f6a43b
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Provide a BUILD_ASSERT and BUILD_ASSERT_MSG that are based on
_Static_assert when that's available, as its output is easier to read.
Change-Id: Ifa96d5073b1341cab2a90e4dcd04752ee80c69bb
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
Like BUILD_ASSERT(), but with a message to emit on failure.
The base implementation swallows the message; compiler headers can
override it when they can do better.
Change-Id: Ib724e48554da77a51afa01468b1d5b7806f9de6b
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
These structs are not mapped to network data, and allocated on stack.
Change-Id: Ib00e15c3d0cdb21fd124ef6f61ec010100bcc9bf
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It's more readable and along with other part of the system.
Change-Id: Ib4be787d74310d838f38b1f1d5624e7357da8969
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
These requests are used to set/get the key, the mode and the level of
the IEEE 802.15.4 link layer security.
Only implicit key mode is supported for now.
Change-Id: Ifbc9a5d08f9fbf0d51d6c3e4b650cfdce3d263db
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Take into account the current security context to compute the header
size.
Provide the function to fill-in the aux security header in a frame.
Finally, call the generic encryption function which will process the
frame relevantly according to the given security context.
For now, only implicit key mode is supported.
Change-Id: I5412c32179e70217c0946b1b54d9a752375d522f
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This provides the means to authentify with/without encryption or
decryption of a frame following a generic 15.4 security context.
Change-Id: Ia5dbb7f43936a8131112fe4b16c9780e30f904c1
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Remove deprecated macros and function and structs that
were deprecated 2 versions ago 1.6 for power management
jira:ZEP-973
Change-Id: I127e482c67e09afea6a2008672661862dbf00c80
Signed-off-by: Amir Kaplan <amir.kaplan@intel.com>
Most controllers (including the QMSI driver currently supported in
Zephyr) use generic register values when configuration 'width' and
'burst'. Thus, let's provide a generic look-up to save every
controller requiring their own one. This should reduce the chance
of needless code duplication.
Change-Id: I49d749775bbf23f4bdcce4fa39685681fdcf6e1e
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Fix an issue where declaring a device in order to use DEVICE_GET macro
resulted in error: 'static declaration follows non-static declaration'.
Change-Id: I3e851e4d34e905601672e60ded50ed888c4d2a3c
Signed-off-by: Michał Kruszewski <mkru@protonmail.com>
Add several missing clocks that are used by other members of the STM32F4
family. This is needed to add support for various hardware, like UART9
and UART10 on STM32F413.
Change-Id: I6f1a04ddece90a04e31a1710065545179b0e530d
Signed-off-by: Florian Vaussard <florian.vaussard@heig-vd.ch>
It appears that enable bits for BKPSRAM and CCMDATARAM are incorrectly
defined as bit 14 and 16 on AHB1 respectively (when these IPs are present),
where we should use bit 18 and 20 according to the various reference
manuals (STM32F415 for instance).
Change-Id: I44ce59a29c57e306f6a945e46043efbcfce7a92f
Signed-off-by: Florian Vaussard <florian.vaussard@heig-vd.ch>
Applications should normally use these functions as then the system
wide DNS server settings are used.
Change-Id: I2c1fc7c7c881081506d21c3d37628d5c3dcc6aaa
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the config file contains DNS server addresses, then
configure the DNS resolver to use them.
Change-Id: Ie7f2bdcf7ac4bb7ee0ecf7fb5b7bd2df3379cdc3
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit introduces a generic DNS resolving API that can
be used by applications. Later commits will introduce a system
level DNS support which simplifies the DNS resolving so that
DNS server names can be given from config file.
Change-Id: I60fbc81e2a44928d2ca53d51e703b9cde222b382
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If IPv6 router is added, then NET_EVENT_IPV6_ROUTER_ADD event
is generated. When router is removed, NET_EVENT_IPV6_ROUTER_DEL
is then generated. This is useful info if we want to have a generic
connectivity to outside of our local network.
Change-Id: Ia03958a071ceb998127894025c99ab72a8b648d5
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is part of a patch series to decouple TCP/IP offload, which
currently occurs at the transport layer (L4), from the data link
layer (L2).
- Rename struct net_l2_offload_ip to struct net_offload
- Rename struct field offload_ip to just offload
- Rename include/net/offload_ip.h -> include/net/net_offload.h
Change-Id: I3cd891c2b13e0e8f3ad1c66264f90b5031ae17c2
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
This is part of a patch series to decouple TCP/IP offload, which
currently occurs at the transport layer (L4), from the data link
layer (L2).
This provides a more direct call stack from the net_context APIs
to the offload driver functions, versus going through the current
offload L2 (dummy) driver.
Change-Id: Ia5a677d87f7b62f54b2702ce8ecfaf026f6f7c26
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
This is part of a patch series to decouple TCP/IP offload, which
currently occurs at the transport layer (L4), from the data link
layer (L2).
This patch simply renames the NET_L2_OFFLOAD_IP Kconfig variable
to NET_OFFLOAD.
Change-Id: Ic8b1d004cbac09b7c636475aaed75b0a31e4be1c
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Instead of simply dropping the packet if the destination IPv6
address is not ours, try to figure out if there is a route
to real destination and then re-route the IPv6 packet there.
Change-Id: I6b2a0d7096b3d7877b82b04f38e3a6e588587c11
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This avoid having duplicated code for list manipulation in both LE and
BR channels.
Change-Id: I734635e8e51d4b826a3d45cda8551e1e509bd913
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
There may be use cases where input and output is in big-endian rather
than little-endian. Introduce a native big-endian API to avoid
excessive byte order reversals in these cases.
Change-Id: Ia7b3e01bb0a07c4560b23f60c2f615ec614eb431
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This avoids overpopulating the high-level bluetooth.h
Change-Id: Icab8500be92003aa45d837ff111a8d93689865cc
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This patch adds support to initiate audio connection from the stack.
< HCI Command: Setup Synchronous... (0x01|0x0028) plen 17 [hci0]
Handle: 256
Transmit bandwidth: 8000
Receive bandwidth: 8000
Max latency: 7
Setting: 0x0060
Input Coding: Linear
Input Data Format: 2's complement
Input Sample Size: 16-bit
# of bits padding at MSB: 0
Air Coding Format: CVSD
Retransmission effort: Optimize for power consumption (0x01)
Packet type: 0x003e
HV2 may be used
HV3 may be used
EV3 may be used
EV4 may be used
EV5 may be used
Change-Id: I4f4c0788760c9bdaf75651825511ff6bcd06df59
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
Expose LE Encrypt helpers to applications. If software-
based controller is compiled-in, then controller's AES
hardware will be used by the exposed helper interface.
Change-id: I2bac9dfa5ccb3dd50447079affb52d920ae5bd81
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>.
Declaring these as const lets the linker generate more optimal code.
Some extra care is needed with hci_ecc.c since it was overwriting the
send callback. Now the choice of send() call is done directly in the
bt_send() function
Change-Id: Iac74f5ee9bee097bbb34c11bd13d1d886700f5cc
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Updated the riscv-privilege SOC family to account for SOCs supporting
a Platform-level Interrupt Controller (PLIC) as specified by the
riscv privilege architecture.
riscv-privilege SOCs supporting a PLIC have to implement the following
list of APIs:
void riscv_plic_irq_enable(uint32_t irq);
void riscv_plic_irq_disable(uint32_t irq);
int riscv_plic_irq_is_enabled(uint32_t irq);
void riscv_plic_set_priority(uint32_t irq, uint32_t priority);
int riscv_plic_get_irq(void);
Change-Id: I0228574967348d572afc98a79257c697efc4309e
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
In case of callback based event listener, it is easy for the callback to
filter on the given interface. But in case of the synchronous call it's
not: it would need, after a failed comparison on the interface pointer
to loop by itself on the net_mgmt_event_wait() which is a little bit
heavy (reinstalling the event listener, with the semaphore and all) and
a bit of a burden for the caller itself.
Instead, net_mgmt provides a dedicated call
net_mgmt_event_wait_on_iface() which does it the right way, so the
callback and the related semaphore are destroyed if only the iface
matches the one given as parameter (besides the timeout obviously).
Change-Id: Iab05c3249586f4f4d0447eea42fdac72b8428f2e
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Instead of creating a handler and a related callback structure on an
event_mask: net_mgmt_event_wait() can be used to wait synchronously on
such event_mask. The core mgmt part will seamlessly reuse the struct
net_mgmt_event_callback so the whole internal notification mechanism is
using the same code.
Change-Id: I426d782c770e75e5222aa3c5b703172b1f1f2e5e
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This patch adds the HTTP/1.1 API for Zephyr. This API consists of client
and server context structures enabled via Kconfig variables.
HTTP parser support is enabled via the CONFIG_HTTP_PARSER configuration
variable.
Currently, this API only includes support for writing HTTP requests
(client mode) and HTTP responses (server mode). TLS support is not
considered in this iteration.
Supported HTTP methods:
GET, HEAD, OPTIONS and POST.
Supported HTTP responses:
400, 403 404. The http_response routine may be used to write
any HTTP status code, for example 200 OK.
Jira: ZEP-1701
Change-Id: Ic9ccd4d4578d6d0f3a439976ea332b031644ca7d
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Now that k_poll landed in the kernel, it's worth using it to save
memory and reduce the number of threads at runtime.
Such switch has been first done in bluetooth (see hci_core.c and conn.c
in subsys/bluetooth/host). Since network interfaces kind of follows the
same design for sending data, it was then easy to copy the same change as
in bluetooth.
Change-Id: I7f9734b88ac818284bbabaedc946b4765b905ebb
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Collect number of received, sent or dropped multicast listener
reports and queries.
Change-Id: Ia5c08203155475763f96df23f44eceffa7569873
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the multicast address already exists, then do not give
error but try to join it.
Change-Id: I32ffa6b3bf0798011d684a1a21e87e389f1f0380
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When network interface is taken down, leave only those
IPv6 multicast groups that were joined.
Change-Id: I414556c093ba67be7c13e6c86e0451465c2203f3
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Send management event if we joined or leaved IPv6 multicast
group.
Change-Id: Ieeb407ef88fb3bf4cd92d4fb4b69f03b260474e7
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
net/net_core.h is not included by default in trickle.h, which can leave
NET_ASSERT undefined.
Change-Id: Ifadeacc745d6623f096e06c16bfb4dfa6a880a40
Signed-off-by: Patrik Flykt <patrik.flykt@linux.intel.com>
These were flagged by icx compiler.
Jira: ZEP-1811 , ZEP-1809
Change-Id: I0dff800ce2bb440b39dceb08b145e085be4c8caf
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Create net_nbuf_frag_del() so that we can track net_buf frees.
If CONFIG_NET_DEBUG_NET_BUF is not defined, then this new function
will call net_buf_frag_del() directly, and if not, then it will
track memory usage.
Change-Id: I5f382436cebc71fdaf12baf7bf964fb63bee7aca
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
User can track memory allocations and deallocations.
This is enabled by CONFIG_NET_DEBUG_NET_BUF option.
Change-Id: I9d83b9b63fb2b141c9a283887f1770bb4232f61c
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
There is no user for the reserve variable inside struct net_nbuf
so remove it.
Change-Id: I45750215cefa2227002eb2de57f080823e7013ce
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The code used net_nbuf_get_reserve_{rx|tx}_data() function to
allocate a fragment. Instead of that low level function, use
net_nbuf_get_frag() instead. There are few places this is not
possible or is too big change like in few test programs.
Change-Id: Ied7e2b7db352de998b200ffa6ff82471bfa5ebe3
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we receive lot of packets, it might happen that we exhaust
all the DATA buffers in the system. This would prevent from
us sending anything to the network.
Change this by splitting the DATA buffer pool into RX and TX
parts. This way RX flooding cannot consume all DATA buffers
that needs to be sent.
Change-Id: I8e8934c6d5fdd47b579ffa6268721b5eb3d64b6d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The function copies the net_buf user data (struct net_nbuf).
Change-Id: I2ea42823d58aea77ea7b710f6ce5fd5d1e3641b4
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It makes no sense to modify the original net_buf so change the
copy function not to touch the original buffer.
Change-Id: I5d22445ce50cee62994c36567f0e995a500cb89d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The first parameter of net_nbuf_copy() must be the head
of the buffer chain i.e., it must contain the user_data
part. If a fragment is given, then we do not know enough
information to allocate the data fragments.
Change-Id: I052b183d8c63d7326b320254f36f00b2fc48b0a0
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Print information about various network buffer pools in the
system. This is useful in debugging the buffer allocations.
Change-Id: I31123c6f1f6647f77503f32e268c174330762128
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is used to show the name of the pool during debugging.
Change-Id: I3a3c3c853e5fe13fd11f6ffd9e1feea4abf0c248
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
User can configure its own pools for data that needs to
be transmitted out (TX). This helps to avoid deadlocking
the system if user space application uses all the buffers
in the system, and the core IP stack tries to get buffer
that needs to be sent out.
By default the net_buf pool support in net_context is turned
off as application developer needs to create the pools and
tie them to desired contexts.
Change-Id: Ida4a1771d34d6c250974e56fba4f0e0b2592cb29
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Adding this information to the pool:
* number of available (free) buffers in pool
* total size of the pool in bytes
This can be used when debugging net_buf pool allocations.
Change-Id: I4212fcddb1affdf53e0827c88473d3380e2a4929
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The dhcpv4 state machine implementation names differ from the names
used by the relevant rfc. There is no good reason for them to be
different, so rename them.
Change-Id: I837f1bc4788c0ed4d2949b12eb6f5bfeef9a0be8
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
There are two implementations of dhcpv4 state name numbers to human
readable strings, unify the two.
Change-Id: I1d654918bb919108a0d8c5514b309b193c9c3f96
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
The dhcpv4 state machine has a dedicated context within each net_if
structure. For reasons unknown the timers used by the dhcpv4 state
machine have been placed in net_if outside of the dhcpv4 context area.
Relocate them into the dhcpv4 context.
Change-Id: I0531f493610dffda9ca9208993597a5665bde997
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
From the response of read_local_supported_feaatures check if local
device supports eSCO packet type and update it to bt_dev.
Also added sco field in bt_dev
Change-Id: If85b3d24d327a6243318fad89a07375a8253f89b
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
__ZEPHYR__ preprocessor macro is a way for a (cross-platform)
application to test if it's built for Zephyr. Currently it's defined
by Makefile, so if an app uses it's own build system, it won't be
available. So, define it in the standard header too to cover such
a case.
Change-Id: Id708d1f20fe3b415968ad8475da449f54ad3c3fb
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This allows to queue buffer to sent later in case it runs out of
credits so it no longer blocks the caller thread.
Jira: ZEP-1776
Change-Id: Ifa9b412f98889b50c0b889655d910520d11a4718
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add support for detecting version 5.0, i.e. 0x09.
Change-Id: Ia2da513b65c420142fe97a4fa173bfa8045e9d75
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
bt_gatt_get_mtu can be useful when GATT is used to transport another
protocol on top.
Change-Id: I328ef49138ccc4ce642b0019d08060f6022d5aa7
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Separate out data element structure header into type and size fields
Change-Id: I869ee1ea82db1f6d669bb905055135b7d63f3fa2
Signed-off-by: Kaustav Dey Biswas <kaustav.d.biswas@intel.com>
Added structure to account for the preset. The user can use the
SBC codec.
Change-Id: Ia2466b6fc166cae919f82a8042f4dd047ed28772
Signed-off-by: Piyush Itankar <piyush.t.itankar@intel.com>
Added an API to allow addition of stream end points by the application.
Change-Id: I91b95fc5dc3b9b2950e8d55b5846e460e55f2453
Signed-off-by: Piyush Itankar <piyush.t.itankar@intel.com>
Current users of sys_bitfield*() are bending over backwards to cast
what is most of the times a pointer into an integer.
Bitfields can be better described with an void *, so
uint{8,16,32,64}_t or any other container can be used. Most
sys_bitfield*() operations, by extension, can do the same. Note void *
has byte arithmetic, like char *.
This change will also make it implicit, for any future split of the
address space between virtual (what the SW is seeing) and physical
(what the HW is seeing) way clearer, as the functions dealing with
physical, non directly referentiable/mappeable addreses to use an
integer type, like mem_addr_t.
- include/arch/ARCH/*asm_inline*:
- sys_bitfield*() all modified to take 'void *'
Note 'void *' arihtmethic is byte based, which makes some things
easier.
- include/sys_io.h:
- introduces DEFINE_BITFIELD
- update docs
- tests/kernel/bitfield: remove all the cast contortions, use DEFINE_BITFIELD
PENDING: update other TCs
- include/arch/nios/nios2.h, drivers/interrupt_controller/ioapic_intr.c:
remove cast contortions
Change-Id: I901e62c76af46f26ff0d29cdc37099597f884511
Jira: ZEP-1347
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Once all users of k_lifo migrate to k_queue this should no longer be
needed.
Change-Id: Ib8af40c57bf8feba7b06d6d891cfa57b44faad42
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes k_fifo functions rely on k_queue and port k_poll to use
k_queue directly.
Once all users of k_fifo migrate to k_queue this should no longer be
needed.
Change-Id: Icf16d580f88d11b2cb89e1abd23ae314f43dbd20
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This unifies k_fifo and k_lifo APIs thus making it more flexible regarding
where the data elements are inserted.
Change-Id: Icd6e2f62fc8b374c8273bb763409e9e22c40f9f8
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
It's not entirely clear where the '%P' came from, but the proper,
documented operand modifier for inserting an immediate value without
punctuation is '%c'.
Change-Id: I17346a6c70183ce79e91faa2fbe61e7761dfd513
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Documentation comments should begin with /**
Change-Id: I59867e8aad340dac4d66f86e09f4f8ae9d3d75fb
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
If IPv6 address is generated from Bluetooth MAC address,
then the Universal/Local bit must not be toggled or touched
at all. See RFC 7668 ch 3.2.2 for details.
Because this change is not compatible with older Linux kernel
BT IPSP support, the old behavior can be enabled by setting
CONFIG_NET_L2_BLUETOOTH_ZEP1656 option.
Change-Id: I05d48723b70f1eb60fbd46107ef6a2a4e8f9154a
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It is possible that the buffer waiting for retransmission is modified
after it is sent, for example, it can be compacted by 6lo, and our
assumption of where is the message ID is located in the buffer is no
longer valid.
As the message ID is the only information that is necessary for
keeping track of retransmissions, we keep a copy of it in the pending
struct, as well as the destination address of the retransmission.
Change-Id: Id33d54353404628673541225a1a05e27ee08765f
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Some GPIO ports activation where missing since not used
on available soc/boards.
Since stm32 family increases, activation of these ports
should be made available.
Jira: ZEP-1551
Change-Id: I612d135b28ef255bc771599e33796671ff81d0ac
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Currently, ARM Cortex-M image ROMs are linked starting at the flash
device's base address (CONFIG_FLASH_BASE_ADDRESS). This prevents XIP
Zephyr applications from being linked to run from elsewhere on the
flash device. Linking Zephyr applications to run from elsewhere can be
necessary when running under a bootloader (i.e., booting into a Zephyr
application from a bootloader, not using Zephyr as a bootloader).
To enable this use case, add a new config option: FLASH_LOAD_OFFSET.
This option directs the linker to treat ROM as if it started that many
bytes from the base of flash on Cortex-M targets. The option defaults
to zero to preserve backwards compatibility.
Change-Id: I64f82aee257c19c2451f9789b0ab56999775b761
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
In order to see who is freeing the fragment, add function
and line information to net_buf_frag_del() when net_buf
debugging is activated.
Change-Id: I732f579fab2390cb16804cb35b83f46e65fca342
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If IPv6 address is generated from IEEE 802.15.4 short address,
then the Universal/Local bit must be set to 0.
See RFC 6282 chapter 3.2.2 for details.
Change-Id: Ied38f40e807bdcd792570b331f6b99a6fcc7db1b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When we know the network interface where the packet is about
to be sent, then set the link address type too.
The link address type is used when working with IPv6 link
local and auto configured addresses.
Change-Id: If086c3c413c025809cffa64311f973bc7bdac7db
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The interface L2 address type is set at the same time as the
L2 address is set to the network interface. This is most
convinient place to set the address type.
Change-Id: I712d7357d075959eb79df3463141cfbc6d163a74
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In order to know what kind of address the L2 link address is,
add a type of the address into struct net_linkaddr.
Change-Id: Icd4cb0374219583689cf9ee204c0840cad8559e9
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Some files made it through review process with full license header.
Change-Id: I2722b127c40b4b19500042c12e4fde85a165bae9
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This section was renamed to kinetis_flash_config, but it slipped back in
with the previous section_tags.h cleanup.
Change-Id: I4a2558aa70379a75c604f3617483680a35ed3d90
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Some arches may want to define this as an inline function, or
define in core arch code instead of timer driver code.
Unfortunately, this means we need to remove from the footprint
tests, but this is not typically a large function.
Issue: ZEP-1546
Change-Id: Ic0d7a33507da855995838f4703d872cd613a2ca2
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
To be API-equivalent with doubly-linked lists.
Change-Id: I98b781f4c649e248abb04f660f686ad76d6b39de
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
Like SYS_DLIST_FOR_EACH_NODE(), but __dn contains a node where to fetch
the next node from, NULL to start at the head.
Note that the function does not iterate from @a node, but from
node->next. This allows the following:
sys_dnode_t *funcA(sys_dlist_t *list, sys_dnode_t *node)
{
SYS_DLIST_ITERATE_FROM_NODE(list, node) {
if (node == <some condition>) {
return node;
}
}
return NULL;
}
sys_dlist_t list = &<some list>;
sys_dnode_t *node = NULL;
do {
node = funcA(list, node)
if (node == <some other condition>) {
goto found;
}
} while(node);
<handle error>
found:
<do stuff with node>
Change-Id: I17a5787594a0ed1a4745bd2e1557dd54895105ca
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
Currently, for the following MQTT msg fields:
- client_id
- will_topic
- user_name
- topic
their length is computed inside the routine that receives the MQTT msg.
Although this simplifies development, also imposes one restriction:
data must be null-terminated. Sometimes, data is received from other
sources and not generated by the application, so the null-terminated
constraint may be considered problematic for the user.
This patch removes the assumption that string fields are null-terminated.
Current data structures are already prepared to handle this case, so no
API change is required.
Change-Id: I5a147a5b21e0da49541cbe62baac363c8737cd3e
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Duplicate const specifier, it should be the pointed data that is const.
Jira: ZEP-1723
Change-Id: I194abb0fc9ad564c6d53e4727bd63c8099d4eb2e
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This implementation of _tsc_read returns a 64-bit value that
is derived from the 64-bit tick count multiplied by hwcycles per tick,
and then it adds the current value from the 32-bit timer.
This produces a 64-bit time. There is a bunch of math here, which
could be avoided if the CPU is built with Real-Time-Clock option.
EM Starter Kit SOCs don't have this. I don't think Arduino 101 does
either.
See ZEP-1559
Change-Id: I9f846d170246556ac40fe2f45809e457c6375d8c
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
The interrupts would be placed at incorrect offsets on systems where
some interrupt vectors are reserved for exceptions, such as ARC.
Change-Id: I5b1f00eb9e8aecb84ae66e3d0461a734ffb5fbe6
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Adds crypto API interface for interaction between applications
and crypto drivers. Encryption/Decryption APIs are defined
here.
Jira: ZEP-328
Change-Id: I1a534ae2a69c7e1c416fa78a2822c37040b225f6
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Makes it cleared that zoap_update_from_block() doesn't modify the
packet.
Change-Id: I35429b153370c50eb5ae9c914b47a3144faf2f04
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Now types and functions have better explanations of their usage and
parameters associated.
Jira: ZEP-1657
Change-Id: I146688324080ac3cf0876f1db3c92c9514e1303d
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Its current placement was splitting the vector table in half.
Move to rodata, a better place for it. There's no requirement for
it to be in the text section.
Change-Id: I67724b2a26a9cb62c2ccd473cb54c53e4f74dc32
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The BSS section needs to use AT> in XIP systems otherwise the LMA
addresses in the ELF binary are wrong, leading to issues if we
try to manipulate the binary with objcopy. The GROUP_DATA_LINK_IN
macro does the right thing here.
This was already done on other arches but ARC was missed.
Change-Id: I93748e919e0b68c1ff2dfb4b85b7064a8d980f3a
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
XCC does neither define __BYTE_ORDER__ nor __ORDER_LITTLE/BIG_ENDIAN__ macros.
This resulted in field preempt of thread.base not correctly built from other
union fields prio and sched_locked, which caused wrong scheduling.
Change-Id: I8566ef4a5cf555906c012c4adc488f9afb26c053
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
1) Fatal errors now all go through _SysFatalErrorHandler. When the
simulator is used, only the death of 'essential' threads will result
in the simulator exiting; some test cases that test exceptions may
actually expect a thread to terminate abnormally.
2) The human readability of the exception errors is improved.
Change-Id: I77f57ea0eae15b0c55237681b959cd21e3fe8c1c
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The XCC compiler freaks out if a section name passed via
__attribute__((section)) has parenthesis in it. This happens in the
case of _MDEF_THREAD_DEFINE.
It turns out the whole mechanism of placing kernel objects in completely
unique sections is totally unnecessary. This patch is a workaround until
we can clean this up.
Change-Id: I12c88a1b8f5b27bec27d608614356c1b479c0a8c
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The old syntax is not accepted by some compilers including XCC.
Change-Id: Id90849a2159652ec225dd2c50d2dc2ddc22a3e08
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
find_msb_set logic was wrong. find_lsb_set() is now an inline function.
Change-Id: I2c19540907723589298b2f6af2ce1d68704bf1d7
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Master branch changed requirements for license headers while this
branch has been in development.
Change-Id: I9bce16ff275057a4bb664019628fc9b6de7aef7c
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The current I2C API provides inline functions to access 1 byte
register addresses. This commit adds a set of I2C inline functions
as shortcuts to handle:
- 16 bit register addressing. A family of functions that allows to
handle 2 byte register addressing and can receive the address
parameter as a simple variable. This allows a developer to handle
the address as a C constant or macro.
- Multiple byte addressing. A family of functions to access
registers with a configurable register address size. This family
of functions handle register addressing of any size but receives
the address parameter as a byte array.
Change-Id: Id369ab9eaad7eea807554371d3a520f67dc2e0f2
Signed-off-by: Juan Manuel Cruz Alcaraz <juan.m.cruz.alcaraz@intel.com>
In order for OpenOCD to have a high-level view of an RTOS, it uses the
GDB protocol to obtain symbols from the system.
The GDB protocol, however, does not allow obtaining fields from
structures directly, and hardcoding offsets is not only brittle (due to
possibly different architectures or changes in the code), it's also
infeasible considering Zephyr is highly-configurable and parts of key
structs can be compiled in or out.
Export an array with offsets for these key structs. Also add a version
element in that array to allow changes in those structs.
Change-Id: I83bcfa0a7bd57d85582e5ec6efe70e1cceb1fc51
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
This replaces the hard-coded vector table, as well as the
software ISR table created by the linker. Now both are generated
in build via script.
Issue: ZEP-1038, ZEP-1165
Change-Id: Ie6faaf8f7ea3a7a25ecb542f6cf7740836ad7da3
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is a new mechanism for generating interrupt tables which will
be useful on many architectures. It replaces the old linker-based
mechanism for creating these tables and has a couple advantages:
1) It is now possible to use enums as the IRQ line argument to
IRQ_CONNECT(), which should ease CMSIS integration.
2) The vector table itself is now generated, which lets us place
interrupts directly into the vector table without having to
hard-code them. This is a feature we have long enjoyed on x86
and will enable 'direct' interrupts.
3) More code is common, requiring less arch-specific code to
support.
This patch introduces the common code for this mechanism. Follow-up
patches will enable it on various arches.
Issue: ZEP-1038, ZEP-1165
Change-Id: I9acd6e0de8b438fa9293f2e00563628f7510168a
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
These were reported by ISSM compiler.
Jira: ZEP-1179
Change-Id: I10d04c2949ad2a390d4c1159d2342c73108a58b7
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
This patch moves the include for the generated_dts_board.h inside of
the include/arch/arm/arch.h file. This was done to simplify the
includes required for files. Only two files will include the dts
generated include file directly: arch.h and the linker.ld
Change-Id: I2614f4fd4eeed2ab635a3264d7dac8b83f97b760
Signed-off-by: Andy Gross <andy.gross@linaro.org>
We now use CMSIS for ARM Cortex-M SoCs so we can remove the last bits of
scs and scb.
Jira: ZEP-1568
Change-Id: I0c7c45b0321dc402ed594e9faffb5109922edcf0
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
_SCS_CPACR_CP10_Pos and _SCS_CPACR_CP11_Pos come from scs.h, we have
versions defined in cmsis.h we should be using instead.
Change-Id: Icd8db02000bbc9ef8b2cf89d359e008f62a7d5e9
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Coverted:
_ScbMemFaultMmfarReset
_ScbBusFaultBfarReset
_ScbUsageFaultAllFaultsReset
To use direct CMSIS register access.
Also removed scb.h and references as there is no longer any code in it.
Jira: ZEP-1568
Change-Id: I469f6af39d1bd41db712454b0b3e5ab331979033
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The previous code incorrectly used the value 0xfe to clear the mem and
bus faults. It attempted to handle the address register valid bits
separately, but reversed the bit order.
Jira: ZEP-1568
Change-Id: I240d072610af9979ca93c0081ed862df08929372
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Coverted:
_ScbBusFaultAddrGet
_ScbMemFaultAddrGet
To use direct CMSIS register access
Jira: ZEP-1568
Change-Id: Ic49b3ac3fc4fb63d413f273569c77f6539e4e572
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
After introduction and activation of STM32Cube LL based driver on
F3 and L4 series, this commit removes the no more needed code for
native driver for these soc.
Change-Id: I266d1a3fc4b464cee34b1cc1a1a333c5bf923e41
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This new clock control driver aims at providing a lightweight
generic driver to the whole stm32 family.
Driver is based on LL Cube API and hence is for now available
only for STM32 supporting this API: stm32f3xx and stm32l4xx.
Other families should be supported soon.
Once globally supported, this unique driver will also help
reducing the impact of stm32 clock control heterogeneity in
other drivers.
Change-Id: Id15a8d0d44f03809b2907ef10d6877700459e674
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This patch adds support for using device tree configuration files for
configuring ARM platforms.
In this patch, only the FLASH_SIZE, SRAM_SIZE, NUM_IRQS, and
NUM_IRQ_PRIO_BITS were removed from the Kconfig options. A minimal set
of options were removed so that it would be easier to work through the
plumbing of the build system.
It should be noted that the host system must provide access to the
device tree compiler (DTC). The DTC can usually be installed on host
systems through distribution packages or by downloading and compiling
from https://git.kernel.org/pub/scm/utils/dtc/dtc.git
This patch also requires the Python yaml package.
This change implements parts of each of the following Jira:
ZEP-1304
ZEP-1305
ZEP-1306
ZEP-1307
ZEP-1589
Change-Id: If1403801e19d9d85031401b55308935dadf8c9d8
Signed-off-by: Andy Gross <andy.gross@linaro.org>
While iterating on each node element it is much more common to try to
access the container struct which up until now have been done manually
using CONTAINER_OF macro, so this introduce CONTAINER variants that allow
to iterate directly with container pointer rather than the list node.
Change-Id: Ie1e0da948cb9517c3c5cd8e86b59b95d7d027bfa
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
While iterating on each node element it is much more common to try to
access the container struct which up until now have been done manually
using CONTAINER_OF macro, so this introduce CONTAINER variants that allow
to iterate directly with container pointer rather than the list node.
Change-Id: Ia24d9b88d5e2c43ffd476f565faf5bb523a9927b
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Change the handling of iface parameter in net_if_ipv6_maddr_lookup()
function:
* If the *iface is set to NULL, then return the found
interface to the caller.
* If the *iface is not NULL, then use that interface
when doing the lookup.
Change-Id: Ia1f0365170ea9f3e615d189231160614a80d241a
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make the IP address parameter const because we are not
modifying the IP address in net_if_ipv6_maddr_add() or
net_if_ipv6_maddr_rm()
Change-Id: I98c19de132e58c386f661e8a76a349d562a82c71
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As the function does not change the original data, make
the corresponding parameter const.
Change-Id: I1125a2f9205dc73de2f0aac0c30110591baace1e
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Update the qmsi dma shim driver based on the new dma api
interface.
Recently, a RFC was posted to update the dma api. The update
to dma api interface was already posted. This change is to
update the dma qmsi shim driver based on the dma api change.
It is using the new data structures and new api function names.
Jira: ZEP-873
Change-Id: If9a772c5ff1c2b10fca05172c48f75223bbf940e
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Update the dma API.
Recently, a RFC was posted and reviewed to update the dma
API. This change is to update the APIs. The change can be
summarized as follows,
1. Compress config data structure to reduce memory usage.
2. Add missing configuration parameters.
All the existing data structures and APIs will be
deprecated and replaced by new ones.
Jira: ZEP-873
Change-Id: I412935fce7a2db9d69b2ef700a995af07fa60e33
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
This is required to allow an "IP Offload" driver to build,
once CONFIG_NET_L2_OFFLOAD_IP is enabled.
This fixes the offload_ip.h header following the change made by
commit eb9055c019
("net: tcp: move accept_cb from net_context to net_tcp")
Change-Id: I1a6010c2dbdfc5e74a2ae172aa0167783f4a0cfe
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Some stuff that was platform-specific is made common, and some repeated
code was made a macro. __in_section() is used elsewhere in the codebase
and its 2nd and 3rd arguments are not necessarily filename/counter.
GCC-specific stuff moved to the toolchain header.
Change-Id: Ibfae919b6dd8a77210801c14e9a1128b43bd63f6
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This private data structure now no longer introduces a typedef or
uses CamelCase. It's not necessary to specify the size of extern
arrays, so we don't need a block of #ifdefs for every arch.
Change-Id: I71fe61822ecef29820280a43d5ac2822a61f7082
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Current API description of net_nbuf_compact() is not very clear.
The first parameter needs to be the first net_buf in the chain.
The changes to this API are needed in order to clarify following
use cases:
1) User provides fragment that is not first of the chain and compact is
successfully done. In this case there is no free space in fragment list
after the input fragment. But there might be empty space in previous
fragments. So fragment chain is not completely compacted.
2) What if input fragment has been deleted and api returns the same
buf?
So this commit simplifies the API behavior. Now net_nbuf_compact()
expects the first parameter to be either TX or RX net_buf and then it
compacts it. It fails only if the input fragment is a data fragment.
Change-Id: I9e02dfcb6f3f2e2998826522a25ec207850a8056
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The net_nbuf_push() API is not used by anyone. Semantics are not
clear and following patch requires changes to push api, so removing
this API for now. If needed this can be re-introduced later.
Change-Id: I1d669c861590aa9bc80cc1ccb08144bd6020dac5
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This commit changes the net_buf getter functions in nbuf.h
by adding a timeout parameter. These function prototypes
are changed to accept a timeout parameter.
net_nbuf_get_rx()
net_nbuf_get_tx()
net_nbuf_get_data()
net_nbuf_get_reserve_rx()
net_nbuf_get_reserve_tx()
net_nbuf_get_reserve_data()
net_nbuf_copy()
net_nbuf_copy_all()
net_nbuf_push()
net_nbuf_append()
net_nbuf_write()
net_nbuf_insert()
Following convinience functions have not been changed
net_nbuf_append_u8
net_nbuf_append_be16
net_nbuf_append_be32
net_nbuf_insert_u8
net_nbuf_insert_be16
net_nbuf_insert_be32
net_nbuf_write_u8
net_nbuf_write_be16
net_nbuf_write_be32
so they call the base function using K_FOREVER. Use the
base function if you want to have a timeout when net_buf
is allocated.
Change-Id: I20bb602ffb73069e5a02668fce60575141586c0f
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Elaborate the i2c API documentation with each of the errno codes that
can be returned on failure.
Change-Id: I28a690c06b94f724053238b5eba3142fcace23f6
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Remove stride[] definition from public API, this definition is not
used by any driver and appears to serve no purpose.
Change-Id: Ib7c9ad4a8e7e17884d150ee811b66db0279d0b33
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
The I2C drivers handle an empty list of I2C messages inconsistenty.
There are two different behaviours, one set of drivers dectects a
requests to transfer zero messages and return -EINVAL while the other
group simple transfer no data and return success.
Adopt the latter behaviour consistently across all drivers. Update
the i2c.h API documentation to reflect this behaviour.
Change-Id: I427fc1b0e18ddc04b7b59c294e0240b3d6ca4073
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Some application protocol required non-persistente subscription
across connection even in bonded case.
Flag BT_GATT_SUBSCRIBE_FLAG_VOLATILE specify if subscription
must be remove during disonnection.
Change-Id: I1bc2bbbb4bc86f58905e44a7eb267ca0871f2fdb
Signed-off-by: Jonathan Gelie <jonathanx.gelie@intel.com>
Clarify the behaviour of gpio read and write functions.
Change-Id: Ib64f9e4bfc6e908a945fd7e17ba4073d3c707fc6
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
The subscriptions callback may free or reuse the subscription so all
instances that where this could happen need to safely fetch the next
element which is why this changes switch to use sys_list_t as it has
SYS_SLIST_FOR_EACH_NODE_SAFE.
Change-Id: I37d51f27116ea0c057b560924a9416676477597b
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reduce the pressure on the common RX buffer pool by reusing HCI
command buffers also for the Command Status or Command Complete
response to them. This also implies removing the existing Kconfig
variable for the command buffer sizes since the size is also dependent
on maximum Command Complete event sizes. Instead, reuse the RX buffer
size also for HCI Command buffers.
Change-Id: I006b287d64a0c9ca40de741aa9a424a49a927385
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
A subsequent patch will start reusing HCI command buffers for
receiving the response, so the distinction of received vs sent data
headroom would just make the code unnecessarily complex. Instead, just
merge these two variable into a single one.
Change-Id: I31d846331939f1a2270df7ed0c75112825e16493
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The C pre-processor doesn't allow using sizeof() in comparisons such
as "#if FOO < sizeof(bar)". To make it possible to use such
comparisons where the sizes of headers are involved, introduce helper
macros for the headers instead of always having to hard-code magic
numbers into the code.
Change-Id: Iaf654cb4aaa49e83360901f5b01225ba4b952854
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Adds API to allow user get SupportedFeatures attribute ID.
Jira: ZEP-1112
Change-Id: I91a1bf548d99c5c7cc75682aed19e89390350533
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Adds API to get available specific information included in protocols UUID
tree during parsing Protocol Descriptor List attribute. Usually it's to
be remote Server Channel/PSM number operating on applicable protocol.
There're a few helper functions added to be able parse and retrieve such
information from raw record data.
Jira: ZEP-1112
Change-Id: I736a780b95ba54821d36e6011b739f5ff37cd64f
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Both all-zeroes and all-ones addresses are invalid. Fix the check for
this so that we fall back to a static random identity address when
needed.
Change-Id: I17cf903e0f3ed321311d86d09bed19343c2c801a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Added a linker script that shall be common to most riscv SOCs.
Linker script also accounts for execution in place in ROM, when
CONFIG_XIP is set.
Nonetheless, riscv32 SOCs (like pulpino) requiring a different
system layout can still define their own linker script.
Change-Id: I3ad670446d439772c29a8204e307ac79643dc650
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
The timeout given to APIs is in milliseconds and not ticks.
Change-Id: Iae198ca3aee326c19d0894a22f6e5cfca19ba131
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Keep track of amount of bytes that are sent or received from
all network interfaces.
Change-Id: I706481aab1a7e0cf2bc78d032f2ef4ebbabe3184
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Current behaviour has an issue when UDP context is created with local
port number 0, net_conn_input() happens to treat zero port as
a wildcard ("receive packets for all ports"). net_context_bind()
for a UDP context doesn't affect its existing connection in any way.
Proposed solution is, context should be created with a random free
port assigned and bind() updates connection information from context.
Jira: ZEP-1644
Change-Id: Idb3592b58c831d986763312077b0dcdd95850bc9
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This flag can be used by driver to indicate pointopoint links which should
not require destination link address to be resolved.
Jira: ZEP-1656
Change-Id: I58dd3bf48485d6203e75373497e00668317b9825
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The returning 'len' was always informing the remaining available space
in that net_buf fragment. This not the expected behaviour for
incoming packets, in this case, we really want the size for the
payload already present in the packet.
When this function is called with a packet without a payload, with
will return the available space in the packet, when the payload is
already set, it will return the size of that payload.
Change-Id: Ia4643b8c2a015ad2316bed037e457b186e420b19
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Channel, pan-id, short and extended addresses.
Change-Id: Ib63dadac37d649df3efc8fdd67f5312d3a7c8e20
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
ORFD or RFD does not matter: the extended address should be set
according to device's MAC address.
Change-Id: I39d09c3a953283eeaa30b908ea159638604bd72b
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Add the malformed callback that will be executed when a message
is received and it does not follow the MQTT v3.1.1 spec.
There is another case when this callback may be executed: when
the IP stack reception buffer's size is not enough to hold an
MQTT message.
The publisher and subscriber parser routines are updated to make
use of this callback. Inline documentation is also updated.
Change-Id: Id1d34336c4322673ca85f2db0b8d432db3c9afa8
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
1) Remove some variables pointing to user-provided data.
2) Pass the context structure instead of those variables.
3) Homogenize the use of "ctx" for all the callbacks receiving the
struct mqtt_ctx * pointer.
Now users must use the CONTAINER_OF macro to access data required
by the MQTT callbacks.
Change-Id: I871c0bd8601a67b39187683215579f9ed0087cf9
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
The death of a network context was sort of a mess. There was one
function, net_context_put(), which was used both by the user as a way
to "close" the connection and by the internals to delete it and to
"clean up" a TCP connection at the end of its life.
This has led to repeated gotchas where contexts die before you are
ready for them (one example: when a user callback decides the
transation is complete and calls net_context_put() underneath the
receive callback for the EOF, which then returns and tries to inspect
the now-freed memory inside the TCP internals). I've now stepped into
this mess four times now, and it's time to fix the architecture:
Swap the solitary put() call for a more conventional reference
counting implementation. The put() call now is a pure user API (and
maybe should be renamed "close" or "shutdown"). For compatibility,
it still calls unref() where appropriate (i.e. when the context can be
synchronously deleted) and the FIN processing will still do an unref()
when the FIN packets have been both transmitted and acked. The
context will start with a refcount of 1, and all TCP callbacks made on
it will increment the refcount around the callback to prevent
premature deletion.
Note that this gives the user a "destroy" mechanism for an in-progress
connection that doesn't require a network round trip. That might be
useful in some circumstances.
Change-Id: I44cb355e42941605913b2f84eb14d4eb3c134570
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
net_addr_ntop() will convert IPv4|6 address to string form.
Renamed existing net_sprint_ip_addr_buf() to net_addr_ntop()
and adjusted parameters as per API.
Jira: ZEP-1638
Change-Id: Ia497be6bf876ca63b120529acbadcfd9162a96e3
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Currently, the function accepts a struct sockaddr * but the code
immediately type casts this to either in_addr or in6_addr. This is
incorrect behavior as the first field in a sockaddr is sa_family_t
and not address data.
So without special knowledge, a developer will use a sockaddr structure
as the parameter and then wonder why the address information isn't being
set correctly.
Let's change this parameter to void * which makes this function similar
to inet_pton().
Jira: ZEP-1616
Change-Id: I1fc9368da999d90feb07c03fac55dcc749d4eba6
Signed-off-by: Michael Scott <michael.scott@linaro.org>
It was in the static initializers, but was missing from the object
runtime init functions.
Change-Id: I10d519760eabdbe640a19cc5cfa9241c1356b070
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
This will allow users to install a way of finding out what the event and
the objects are used for without looking at the object itself, or to
tag a bunch of objects that belong together.
The runtime init function _does not_ take a tag so that there is no
runtime hit if not needed. The static initializer macro _does_ take the
tag, so that it does not have to be initialized at runtime if needed,
and thus avoids a runtime hit.
Change-Id: I89a36c6f969ff952f9d1673b1bb5136e407535c6
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
These interrupts are for ISRs that need the lowest possible latency.
They do not take parameters and are installed directly in the interrupt
vector table.
Issue: ZEP-1038
Change-Id: I7583e9191dd32d9253ad933181d2103a6e191dea
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
k_poll() is similar to the POSIX poll() API in spirit in that it allows
a single thread to monitor multiple events without actively polling
them, but rather pending for one or more to become ready. Such events
can be a direct event, or kernel objects (currently only semaphores and
fifos).
When a kernel object being polled on is ready, it is not "given" to the
poller: the poller must then acquire it via the regular API for the
object (e.g. k_sem_take()). Only one thread can poll on a particular
object at one time. These restrictions mean that k_poll() is most
effective when a single thread monitors multiple events that are not
subject for contention. For example, being the sole reader on multiple
fifos, or the only thread being signalled by multiple semaphores, or a
combination of both.
Change-Id: I7035a9baf4aa016fb87afc5f5c0f5f8cb216480f
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
Allow peeking at the fifo to see if there is an element without
dequeuing it.
Change-Id: I99cbe4495c81f1d7b77ad6a37cef4ec8c24d48eb
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
As cpu_idle.S is the only bit of code that is using the SCB asm defines,
so to allow us to remove scb.h in the future lets move the defines that
are used just into cpu_idle.S
Jira: ZEP-1568
Change-Id: I3c3a6f145ec4c1a43f076d079d5fe1694c255b78
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Kill of nvic.h and use either CMSIS helper functions for NVIC or direct
NVIC register access via CMSIS for IRQ handling code.
Jira: ZEP-1568
Change-Id: If21910b9293121efe85c3c9076a1c2b475ef91ef
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Move the exception priority related defines into exc.h out of nvic.h
Change-Id: I7ded917a3f6f7cdbc506b2f70c22f37eddc5f5c7
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Replace _ScbExcPrioSet with calls to NVIC_SetPriority as it handles both
interrupt and exception priorities. We don't need to shift around the
priority values for NVIC_SetPriority.
Jira: ZEP-1568
Change-Id: Iccd68733c3f7faa82b7ccb17200eef328090b6da
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Renames the flash security section so it makes sense for other Kinetis
devices, not just k64. In Kinetis reference manuals, this section is
referred to as the 'flash configuration field'.
Change-Id: I2b7c7cc1ec2541419d77878d367d96c9ceb7a0cf
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The functions that implement usb_request_handlers are already using an
int32_t for transfer_len, so lets make the typedef match. This address
a potential issue in the future when the typedef of int32_t changes (or
when building with newlib).
Change-Id: I6e478551c38f2040b0dcec47c2e4c565c27acdd0
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Added structure definition for stream end points
and the a2dp stream.
Change-Id: I6d0cc08611f5179397bea6200eb9244d7c1cc8d6
Signed-off-by: Piyush Itankar <piyush.t.itankar@intel.com>
This is mainly for backward compatibility with 1.0b devices and for
spec compliance. CFC is mandatory post 1.0b spec where in MSC FC
shall not be used.
FC bit in MSC is used to manage the flow control. If FC is 1 then
the device is unable to accept frames.
Implementation is done by reusing "tx_credit" as a binary semaphore
wherein it will be blocked if MSC is recieved with FC bit 1 and
unblocked if FC bit is 0. Once tx thread is scheduled then semaphore
should be always available until all the buf in queue is sent.
Change-Id: I91181668ec0f46ff0b02905dd97e4503fc1fa7a7
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Add SENSOR_CHAN_*_XYZ enum values to be used instead of
SENSOR_CHAN_*_ANY, because the new naming takes into account that
they are used to fetch all the 3 axes for a channel (X, Y and Z)
and not just any number of them.
Also deprecate old SENSOR_CHAN_*_ANY enum values.
Change-Id: I59e9901c1f8879d084bdb7c95583c2b28aa1e025
Signed-off-by: Bogdan Davidoaia <bogdan.davidoaia@linaro.org>
The cause for this change is TCP. Until now, the radio strategy driver
(ALOHA or CSMA) was providing the actual nbuf, and not the buffer
fragment, counting on the fact that the loop was using
net_buf_frag_del() which made so, iteration after iteration, buffer
framgent to be always buf->frags. The problem with this logic is loosing
the fragments that might be still referenced by TCP, in case the whole
buffer did not make it so TCP can retry later and so on.
Instead, TX now takes the nbuf and the actual frag to send. It could
have been working with just a pointer on the data, and the whole length
of the frame. But it has been avoided due to possible future devices,
that will be smarter and run CSMA directly in the hw, thus it will
require to access the whole buffer list through the nbuf.
Change-Id: I8d77b1e13b648c0ec3645cb2d55d1910d00381ea
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Telnet "Interpret As Command" (IAC) code is ignored.
Change-Id: I882397389d77b8adfcbce62fbd9654c0b0412ae3
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Let's use the generic console input type now. This will be useful for
other console input drivers such as telnet.
Change-Id: I787a1e9d86481d5f8c4803453726d9042a89dea4
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Input line length can be modified via Kconfig.
Change-Id: I3423fce9814e04b11d11e5d391f85fe1efbe8d17
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
As for IN6ADDR_ANY_INIT, let's have an INADDR_ANY_INIT.
Change-Id: I07c9ec6d2bb20d3a228edaac2e3380942feac5fd
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Check if input parameters are valid or not. It might lead to crash
NULL address input.
Change-Id: Ib446ab0467268bca01f478cca3ece868c7c9e49b
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The net_context_connect() callback was being invoked synchronously
with the transmission of the SYN packet. That's not very useful, as
it doesn't tell the user anything they can't already figure out from
the return code. Move it to the receipt of the SYNACK instead, so the
app can know that it's time to start transmitting. This matches the
Unix semantics more closely, where connect(2) is a blocking call that
wakes up only when the connection is live.
Change-Id: I11e3cca8572d51bee215274e82667e0917587a0f
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Fold the OPEN_DRAIN GPIO interface into the DRIVE_STRENGTH interface.
The latter is more flexibile, suporting a larger range of hardware
capability.
Change-Id: I7ee01c8d375e3e4fe8ad10c075e365d246e83c75
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Provide a mechanism to configure different pin drive strengths on
hardware with that capability.
Configuration flags are provided to select each of DFLT, ALT and
DISCONNECT drive strengths independently for low and high outputs.
This provides sufficient flexbility to configure all of the drive
strength capability in at least nRF5 hardware.
The flags are chosen such that in the absence of a drive strength
flag a driver selects DFLT drive strength. This ensures that an
existing application that omits a flag continues to observe the
preexisting behaviour.
The behaviour of the drive strength flags is documented such that a
driver for hardware that does not support a particular drive strength
will simply defalt to the standard drive strength for that hardware.
Change-Id: I9894cc5e739a1899a4ecf795f2a5980b95b0c7a0
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
The K_<thread option> flags/options avaialble to users were hidden in
the kernel private header files: move them to include/kernel.h to
publicize them.
Also, to avoid any future confusion, rename the k_thread.execution_flags
field to user_options.
Change-Id: I65a6fd5e9e78d4ccf783f3304b607a1e6956aeac
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
This will be needed for some thread user options that will move to
kernel.h since they are part of the user API.
Change-Id: I46e302b6cafcdddbad3458134b98feb5b8d45d9b
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
Replace _scs_relocate_vector_table with direct CMSIS register access and
use of __ISB/__DSB routinues. We also cleanup the code a little bit to
just have one implentation of relocate_vector_table() on ARMv7-M.
Jira: ZEP-1568
Change-Id: I088c30e680a7ba198c1527a5822114b70f10c510
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
As a first step towards removing the custom ARM Cortex-M Core code
present in Zephyr in benefit of using CMSIS, this change replaces
the use of the custom core code with CMSIS macros in
enable_floating_point().
Jira: ZEP-1568
Change-id: I544a712bf169358c826a3b2acd032c6b30b2801b
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Support using CMSIS defines and functions, we either pull the expect
defines/enum from the SoC HAL layers via <soc.h> for the SoC or we
provide a default set based on __NVIC_PRIO_BITS is defined.
We provide defaults in the case for:
IRQn_Type enum
*_REV define (set to 0)
__MPU_PRESENT define (set to 0 - no MPU)
__NVIC_PRIO_BITS define (set to CONFIG_NUM_IRQ_PRIO_BITS)
__Vendor_SysTickConfig (set to 0 - standard SysTick)
Jira: ZEP-1568
Change-Id: Ibc203de79f4697b14849b69c0e8c5c43677b5c6e
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
In preperation for removing the scb/scs layers and using CMSIS directly
lets remove all the _Scb* and _Scs* functions that are not currently
used.
Jira: ZEP-1568
Change-Id: If4641fb9a6de616b4b8793d4678aaaed48e794bc
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Now that we have a more generic mcux spi driver that can be used across
multiple Kinetis SoCs, remove the specific k64 spi driver.
Jira: ZEP-1374
Change-Id: Ifc324374f305837f5e3d2cfd7ad30d3608865b5b
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
On other targets, CONFIG_TEXT_SECTION_OFFSET allows the entire image to
be moved in memory to allow space for some type of header. The Mynewt
project bootloader prepends a small header, and this config needs to be
supported for this to work.
The specific alignment requirements of the vector table are chip
specific, and generally will be a power of two larger than the size of
the vector table.
Change-Id: I631a42ff64fb8ab86bd177659f2eac5208527653
Signed-off-by: David Brown <david.brown@linaro.org>
Implementation includes adding some defines in the pinmux,
adjusting gpio driver to specific defines for STM32F3X family,
adding specific functionality in the F3X SoC definition.
Change-Id: I465c66eb93e7afb43166c4585c852e284b0d6e67
Signed-off-by: Adam Podogrocki <adam.podogrocki@rndity.com>
_NvicSwInterruptTrigger is only utilized by a testcase for irq handling
on ARM-V7M. Just put the code into the testcase so we dont need to
support an additional interface.
Change-Id: I763c63c32a7a52918250458351d08b8fa54069dd
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The k20_sim.h used by the PWM driver has some defines that also exist in
the MCUX HAL. Lets pickup the values from the HAL and drop the one's
that are in k20_sim.h. Also, they aren't used by anything at this
point.
Change-Id: Iaed4e8e5cec7d57a5ce9e89480cecfb7dc90a5e6
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
It is useful that the user API can know whether the connection
was established properly or not. So this commit adds status
parameter to connect callback in net_context API.
The call to connect callback needs to be set properly in TCP
code. This commit does not fix the connect callback call which
is not properly done right now in net_context.c.
Change-Id: I284a60ddd658ceef9e65022e96591f467a936a09
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the parameter "timeout" is set in net_context_connect(), the
assumption by the user is that the function would wait for SYNACK
to be received before returning to the caller.
Currently this is not the case. The timeout parameter is handed
off to net_l2_offload_ip_connect() if CONFIG_NET_L2_OFFLOAD_IP is
defined but never handled in a normal call.
To implement the timeout, let's use a semaphore to wait for
tcp_synack_received() to get a SYNACK before returning from
net_context_connect().
Change-Id: I7565550ed5545e6410b2d99c429367c1fb539970
Signed-off-by: Michael Scott <michael.scott@linaro.org>
net_context is used for more than just TCP contexts. However,
the accept_cb field is only used for TCP. Let's move it from
the generic net_context structure to the TCP specific net_tcp
structure.
Change-Id: If923c7aba1355cf5f91c07a7e7e469d385c7c365
Signed-off-by: Michael Scott <michael.scott@linaro.org>
The recv_data_wait field in struct net_context is described as a "Mutex"
when in fact it's a semaphore signal.
Change-Id: I3bef8d1a07ceb3da5894ae4cdc8f1fe3c61c5dbe
Signed-off-by: Michael Scott <michael.scott@linaro.org>
If TCP is not enabled, then compile out the TCP retransmit
list variable that is part of net_buf struct.
Change-Id: I07e188454d9be76ac93fe96405f00a89b967668a
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In some situations, for example, when the remote side sends a RESET
message indicating that it is no longer interested in observing a
resource, it is helpful to have a way to obtain the obverser
representation.
Change-Id: Ifbf627f9170be844fd525c557dda8cb722ac7aff
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
This status is used when a blockwise transfer should continue with the
next block.
Change-Id: If68c32aea8c0b63efcd929cdff57f0ff235b2792
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
If the prefix length % 8 is not 0, then the remaining
bit length was calculated incorrectly and the prefixes
were claimed to match even though they might not be the
same.
Adding a test cases for testing this properly.
Coverity-CID: 157591
Change-Id: I9cb5a73d5cc211ec183176400fa5e2dfd209e2da
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The net_linkaddr_storage structure contains an array of bytes used
to store the link address. This array can be different sizes
depending on the CONFIG options used when building. To facilitate
consistency and error checking let's introduce a new helper function
to copy the addr and len values to this structure.
Also move all uses of memcpy related to net_link_storage structures to
the new helper function.
Change-Id: Ic547d86b07e62e5ac3bc330d4eaeb4508a143200
Signed-off-by: Michael Scott <michael.scott@linaro.org>
- Introduce NET_LINK_ADDR_MAX_LENGTH which is either 6 or 8
depending on whether CONFIG_NET_L2_IEEE802154 is used
- Instead of being a placeholder single index array of uint8_t,
let's use NET_LINK_ADDR_MAX_LENGTH to assign the size of the
"addr" array field in the net_linkaddr_storage structure.
- Now that the "addr" field of net_linkaddr_storage contains the
true size of the link address, we can remove "storage" field
which was hard coded to 8 bytes (2 uint32_t's).
- Fix 2 references to the "storage" field of the net_linkaddr_storage
structure.
Change-Id: I2ea12058280b289f65085964eb7d503d4fd260c2
Signed-off-by: Michael Scott <michael.scott@linaro.org>
These previously had only been invoked from ASM domain.
Change-Id: Ia20caf1b02a4ceee16d964211874c5f798445fe2
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Had only been called from ASM domain, but upcoming interrupt changes
invoke it from core arch C code as well.
Change-Id: Ifd831826068e130e2936cfa4da6c082c3433a5ae
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.
Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.
Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file. Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.
Jira: ZEP-1457
Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
These were causing some issues in the old kernel, but the unified
kernel no longer uses these.
Issue: ZEP-513
Change-Id: I87216565231cd244886fbffe4b4d420d1687b245
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
In case the channel provides its own MTU and allocator it should be
able to store as much data as set in the MTU, based on that the code
can give enough credits to fill the entire channel MTU.
Change-Id: I291cf1bb643f200bde191914e814f681f4f65c3e
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This helps catch any format string issues when using this API.
Change-Id: I9475eed4fa12e72182cc16b0fa4a358fa6faca8e
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The new IS_ENABLED macro allows exposing conditionally enabled code
always to the compiler, even though it may not ultimately end up being
built. This is in particular useful for letting the compiler catch any
logging format string errors. Introduce a new BT_DBG_ENABLED macro
that c-files need to define before including <bluetooth/log.h> in
order to choose whether BT_DBG() logs are enabled or not.
When no Bluetooth logs are enabled the patch also modifies the log
macros to have the format strings checked with the help of the
__printf_like annotation and empty static inline functions.
Change-Id: Ie6bc8e10727b5b306f3ed0f94089a07a22583d9b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The idle priority was not accounted for.
With this change, the philosophers demo runs in coop-only mode.
Change-Id: I23db33687bcf3b2107d5fc07977143730f62e476
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
In such a case, the system must take the idle coop priority into
account.
Change-Id: Ica5a4a7a659cb165073e9b8042a77ed23a6a662a
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
Introduce a new callback to bt_conn_cb that allows the application to
decide whether the accept or reject an incoming connection parameter
request. If the request is accepted the callback allows the
application to also adjust the values to what it thinks are more
appropriate.
The Zephyr Bluetooth API allows multiple registered connection
callbacks, so in principle there may be multiple le_param_req()
callbacks. It's recommended for an app to just use one (for clarity),
but if there are multiple the app is responsible for managing
potentially different requirements. In the case of multiple callbacks
each callback will receive the modified parameters in case a previous
callback modified them.
Jira: ZEP-1474
Change-Id: I098db5791aac521f1edfa9fefdf847db0a27e3a5
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
BT_BUF_RX_SIZE is used for the RX buffer pool which is used for both
ACL data and HCI events. It should therefore not contain any
ACL-specific details. This patch removes the ACL header size from the
macro and instead makes taking it into account the responsibility to
the Kconfig option. Since buffer sizes are anyway rounded up to the
nearest multiple of 4 the default goes up from 70 to 76.
Change-Id: I41274d9131e7529d41c16bd66de95637fb150a29
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add proper documentations for all of the callbacks that are part of
the bt_conn_cb struct.
Change-Id: Iabce1d08a84c3849307c436a2cc528edffc62242
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The Core Specification Supplement v7 defines one new ATT error code.
Change-Id: I4fe5341a6bbc57fd73e5a12fcc4dc72b643eab35
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Properly document the various APIs exposed by hci_driver.h.
Change-Id: Ic8daba4956e4c5d2cc6597556b55ab5221495ad7
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There are no users of this API and no (currently) envisioned use cases
for it. Remove it for now - it can always be brought back later if
there's a need for it.
Change-Id: I6530e096e3671c844a3f7dea8856147ffc716d71
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This was missing and all kernel objects belong to this group.
Change-Id: I3c31b168ca984b7d44cc5614a2e2bd5cc492cf50
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Remove the type field from the sensor value structure. All values will
have the type previously defined by SENSOR_VALUE_TYPE_INT_PLUS_MICRO.
This simplifies the interface, as apps will know what value type to
expect. Apps that prefer to use double values can optain them using the
sensor_value_to_double function.
Change-Id: I3588d74258030eb16c3f89d8eead13cca4606b18
Signed-off-by: Bogdan Davidoaia <bogdan.davidoaia@linaro.org>
Similar to what was available with nano timers in the original kernel,
allow a user to associate opaque data with a timer.
Fix for ZEP-1558.
Change-Id: Ib8cf998b47988da27eba4ee5cd2658f90366b1e4
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
pulpino soc has custom-extended riscv ISA that is accounted
for if CONFIG_RISCV_GENERIC_TOOLCHAIN is not set.
(ex: bit manipulation asm opcodes)
Change-Id: I4dafc4ebc2fedcc4eb6a3dedd0412816afea6004
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
RISC-V is an open-source instruction set architecture.
Added support for the 32bit version of RISC-V to Zephyr.
1) exceptions/interrupts/faults are handled at the architecture
level via the __irq_wrapper handler. Context saving/restoring
of registers can be handled at both architecture and SOC levels.
If SOC-specific registers need to be saved, SOC level needs to
provide __soc_save_context and __soc_restore_context functions
that shall be accounted by the architecture level, when
corresponding config variable RISCV_SOC_CONTEXT_SAVE is set.
2) As RISC-V architecture does not provide a clear ISA specification
about interrupt handling, each RISC-V SOC handles it in its own
way. Hence, at the architecture level, the __irq_wrapper handler
expects the following functions to be provided by the SOC level:
__soc_is_irq: to check if the exception is the result of an
interrupt or not.
__soc_handle_irq: handle pending IRQ at SOC level (ex: clear
pending IRQ in SOC-specific IRQ register)
3) Thread/task scheduling, as well as IRQ offloading are handled via
the RISC-V system call ("ecall"), which is also handled via the
__irq_wrapper handler. The _Swap asm function just calls "ecall"
to generate an exception.
4) As there is no conventional way of handling CPU power save in
RISC-V, the default nano_cpu_idle and nano_cpu_atomic_idle
functions just unlock interrupts and return to the caller, without
issuing any CPU power saving instruction. Nonetheless, to allow
SOC-level to implement proper CPU power save, nano_cpu_idle and
nano_cpu_atomic_idle functions are defined as __weak
at the architecture level.
Change-Id: I980a161d0009f3f404ad22b226a6229fbb492389
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
This adds NET_REQUEST_BT_DISCONNECT which can be used to disconnect
IPSP in case it is connected.
Change-Id: I8da00b02ee08611bef5f4c0708936b2d31fd2a93
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds NET_REQUEST_BT_SCAN which can be used to scan peripherals
advertising IPSS UUID.
Change-Id: I2463079d182b4da080e6ef94d883c7c1e24a454c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Connect command can be used to initiate a connection, which in IPSP
terminology refer to a router role.
Change-Id: I12b9428924c88a9c68d3adbfe9016a0dd690aade
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
They should return the same value as in NET_MGMT_LAYER and
NET_MGMT_LAYER_CODE.
Change-Id: Ia95adcd3b6b6aaf0ed29f3260bc54784ca532d8f
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When CONFIG_NET_MGMT_EVENT is not set, it will still be able to compile
code using net_mgmt_event related functions.
Change-Id: I6824c57093636867ea4228338aa6c02913975510
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
TCP didn't actually have a way to signal synchronous receipt of a FIN
packet. Extend the recv_cb API to allow a NULL buf argument with
status==0 (by analogy to Unix's zero-length read) to signal EOF.
Update docs too, and also echo_server which wasn't prepared to handle
this situation.
Change-Id: I7dc08f9e262a81dcad9c670c6471898889f0b05d
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The state of a net context is checked as a whole value (not individual
bits). Currently, the net_context_set_state function is adding the
passed in flags to the existing value. This is incorrect.
Change-Id: Ieba6b9dfc35537745b14c50a2ccb115c6976c001
Signed-off-by: Michael Scott <michael.scott@linaro.org>
The cortex-m7 is an implementation of armv7-m. Adjust the Kconfig
support for cortex-m7 to reflect this and drop the unnecessary,
explicit, conditional compilation.
Change-Id: I6ec20e69c8c83c5a80b1f714506f7f9e295b15d5
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Precursor patches have arranged that conditional compilation hanging
on CONFIG_CPU_CORTEX_M3_M4 provides support for ARMv7-M, rename the
config variable to reflect this.
Change-Id: Ifa56e3c1c04505d061b2af3aec9d8b9e55b5853d
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Precursor patches have arranged all conditional compilation hanging on
CONFIG_CPU_CORTEX_M0_M0PLUS such that it actually represents support
for ARM ARMv6-M, rename the config variable to reflect this.
Change-Id: I553fcf3e606b350a9e823df31bac96636be1504f
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
The ARM code base provides for three mutually exclusive ARM
architecture related conditional compilation choices. M0_M0PLUS,
M3_M4 and M7. Throughout the code base we have conditional
compilation gated around these three choices. Adjust the form of this
conditional compilation to adopt a uniform structure. The uniform
structure always selects code based on the definition of an
appropriate config option rather the the absence of a definition.
Removing the extensive use of #else ensures that when support for
other ARM architecture versions is added we get hard compilation
failures rather than attempting to compile inappropriate code for the
added architecture with unexpected runtime consequences.
Adopting this uniform structure makes it straight forward to replace
the adhoc CPU_CORTEX_M3_M4 and CPU_CORTEX_M0_M0PLUS configuration
variables with ones that directly represent the actual underlying ARM
architectures we provide support for. This change also paves the way
for folding adhoc conditional compilation related to CPU_CORTEX_M7
directly in support for ARMv7-M.
This change is mechanical in nature involving two transforms:
1)
#if !defined(CONFIG_CPU_CORTEX_M0_M0PLUS)
...
is transformed to:
#if defined(CONFIG_CPU_CORTEX_M0_M0PLUS)
#elif defined(CONFIG_CPU_CORTEX_M3_M4) || defined(CONFIG_CPU_CORTEX_M7)
...
2)
#if defined(CONFIG_CPU_CORTEX_M0_M0PLUS)
...
#else
...
#endif
is transformed to:
#if defined(CONFIG_CPU_CORTEX_M0_M0PLUS)
...
#elif defined(CONFIG_CPU_CORTEX_M3_M4) || defined(CONFIG_CPU_CORTEX_M7)
...
#else
#error Unknown ARM architecture
#endif
Change-Id: I7229029b174da3a8b3c6fb2eec63d776f1d11e24
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
The cortex-m related memory map definitions in memory-map.h are all
CPU specific. In preparation for replacing
CONFIG_CPU_CORTEX_M0_M0PLUS with CONFIG_ARMV6_M and
CONFIG_CPU_CORTEX_M4_M4 with CONFIG_ARMV7_M, adjust memory_map.h
conditional compilation to hang on CONFIG_* variables for specific
cortex CPUs.
Change-Id: I2af0b75eaa5b16f88836dbdae41446beacaeba71
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
This trick was pioneered in Linux as the config_enabled() macro. The
madness has the effect of taking a macro value that may be defined to
"1" (e.g. CONFIG_MYFEATURE), or may not be defined at all and turning
it into a literal expression that can be used at "runtime". That is,
it works similarly to "defined(CONFIG_MYFEATURE)" does except that it
is an expansion that can exist in a standard expression and be seen by
the compiler and optimizer. Thus much #ifdef usage can be replaced
with cleaner expressions like:
if (IS_ENABLED(CONFIG_MYFEATURE))
myfeature_enable();
Change-Id: I40657d2aa3f802429ac33675a1fe245a5da86615
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The ICCM memory, when present, can be both written and read,
so changing the attributes to be read-write-execute.
Change-Id: I432bd36f4a6ef632b7c4ce3bf8aa138895d52642
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
The main, idle, interrupt and workqueue call stack definitions are not available
to applications to call stack_analyze() on, but they often require to be
measured empirically to tune their sizes in particular applications and
use cases.
This exposes a new k_call_stacks_analyze() API call that allows the
application to measure the used call stack space for the 4
kernel-defined call stacks.
Additionally for the ARC architecture the FIRQ stack is also profiled.
Change-id: I0cde149c7366cb6c4bbe8f9b0ab1cc5b56a36ed9
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Remove legacy option and use SYS_CLOCK_EXISTS where appropriate.
Change-Id: I3d524ea2776e638683f0196c0cc342359d5d810f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Various sensor samples are hardwired to expect returned sensor values
are represented as doubles. In each case this assumption is incorrect.
Introduce a generic sensor_value to double helper function and adjust
the samples to use it.
Change-Id: I89c788686576562b84e07a36064640231340c33b
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
It is then possible to set the channel, pan_id and short address through
this API. Such features are mainly useful for testing purposes.
Change-Id: I41aeb397afdb231458a3b13638f3e13d3ac28a6c
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Fix some documentation issues found at the dns_client.h file.
Change-Id: I3c1138f55b182ad2507b2cc3a4a50dc874a0d730
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Changes applied by this patch:
- Add the mqtt_publisher_parser routine
- Add the MQTT_PACKET_TYPE macro to get the MQTT msg packet type
(required by mqtt_publisher_parser)
- Add the mqtt_linearize_buffer (required by mqtt_publisher_parser)
- Add the mqtt_recv callback for reception
- Modify the mqtt_init routine to install the reception callback
The mqtt_publisher_parser routine is a callback used internally
to execute the appropriate mqtt_rx routine. Only the following
messages are handled by this routine:
MQTT_CONNACK, MQTT_PUBACK, MQTT_PUBREC, MQTT_PUBCOMP and MQTT_PINGRESP.
On error, it executes the ctx->malformed cb, if defined.
This commit also introduces the mqtt_linearize_buffer routine that
will be used to linearize an IP stack fragmented buffer. This patch
makes use of the net_nbuf_linear_copy routine to linearize the
incoming buffer. mqtt_rx_xxxx routines are also updated to handle
linear buffers (no fragmentation).
Currently, all the network protocol routines assume that the input
buffer is not fragmented. Future versions will remove that assumption
and the mqtt_linearize_buffer routine will be removed as well.
Public MQTT API is not affected by this patch.
Change-Id: I02fece67052ffbc7cb393d5ca545c503da463c4b
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
The reception cb: internal use only cb that will be set according to
the application profile: PUBLISHER, SUBSCRIBER, PUBLISHER & SUBSCRIBER
or SERVER.
Change-Id: Ib36b0686deb9220e507f9e468aae1b1191c35d31
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
The mqtt_rx_publish is used to process incoming MQTT PUBLISH
messages. This routine performes the following steps:
- take ownership of the rx buffer containing the MQTT PUBLISH msg,
- call the MQTT parser routine, and
- determine, based on the incoming message's MQTT QoS,
the next action.
Change-Id: I3cc011cf0c280205161d0484f12a2cfa79fdf44a
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Some public function prototypes are missing, so this commit adds
them to the mqtt.h header.
Change-Id: I57a50ce346f086f55e499bfc8c815fd161a52f7b
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Use the appropriate data type for some variables:
- const input arguments
- int32_t instead of uint32_t for timeout
- uint8_t instead of int for variables that take just a few
possitive values.
Change-Id: Id7d762b400fa17e6751829ac401cd7c13aabb7b2
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This commit adds one routine previously found at the DNS resolver
library. The net_nbuf_linear_copy routine allows to "linearize"
an IP stack network buffer. This routine is required by functions
that must jump between big chunks of data that in this case may
lie between many fragments. Tracking fragments may be a tedious
task, so getting a linear copy of the buffer will reduce code
complexity altough it increases memory consumption.
The DNS client library is updated to reflect these changes.
Change-Id: Iae321f99fa9b05fae7e722b6d41baac427d82d7e
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
If associated, this will request to disassociate from the PAN. That's
only client side, PAN coordinator can also disassociate a client, which
case is not handled here.
Change-Id: If308f51b62c5006b4a2db53d0c891e8192f3c198
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Active scan differs from passive scan by sending a Beacon request (thus
the "active" part) and wait for beacons in reply to it.
Taking the opportunity to add debugging output to scanning logic.
Change-Id: I85001b1ea17f4ec4cd315dc39524c4d8f053cee2
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Such management request will enable association the 15.4 device to an
existing PAN.
Change-Id: I61ffd5e4d8192716e067c5225b3327f08944063b
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Currently, as only CC2520 device is supported: it will loop over the 16
channels present in 2.4Ghz spectrum. However, this will need refinement
as soon as other spectrums will be in use: L2 layer could request
capabilites from the device in order to know which range to use.
Scan result is done one at a time for now. It's unlikely going to fit
all production use case, so it's going to change in the future.
Change-Id: I2fafec49eb5cbfca1a4f04107ba3b6511d7d956d
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It can be thus used to track the status of network interfaces in order
to act accordingly (no need to try sending things on network if the
interface is down for instance).
Change-Id: Ie160ef0dfdad6679d531d05a7abada96ad1de7db
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This adds enable callback which can be used to notify the L2 driver about
changes of interface state, the L2 driver can then check if the new state
is allowed and reject otherwise.
Change-Id: I4bb6b1e32be2633f24694c0246585f803f8c645d
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds NET_IF_UP flag support indicating the interface is up,
currently this shall only be used internally by the driver, later on it
shall be possible to make it public by using dedicated functions.
Change-Id: I38090da4030395b2341733b846004789416d61c1
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This basically implements timer for connection and disconnection.
Conn timer will be started when dlc is initialized and stopped
when it is connected. Authentication if any, will be also included
in this timer.
Disc timer will be started during disconnect initiation.
Change-Id: Ia4b74e478fefa42db21aef528e623a24c72ddf7f
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
User may want to know when getting called user UUID callback handler
on what UUID the result data was retrieved from server.
Jira: ZEP-1112
Change-Id: Iabb2dbdf0f3cfdb24244e052f094c7549164b199
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Since callers of bt_recv() have so far anyway been required to know in
which context to call it (based on e.g. bt_hci_evt_is_prio) it's
cleaner to have two separate APIs: bt_recv and bt_recv_prio.
Change-Id: Icd0d9aed9c51ffd2def31432c4ffcc16a9f13ccd
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The separate ACL & event pools will soon be removed, and it's already
now convenient to have a generic API when the exact type of the
incoming packet is not yet known.
Change-Id: I84cb65d17ea69ebeaeb21532fbf76689e4fb59a0
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The controller doesn't support this feature and the only driver that
was needing it (h4.c) will be converted not to rely on it in the next
patch.
Change-Id: Ia514b79b6d05aa128768c2355353b7797e8b8977
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add support for using the context bt_recv() is called in as the RX
thread, rather than having a separate host-side RX thread.
Change-Id: I256bfe5dece5272c816f2292e58747553189963d
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If the controller doesn't need ACL host flow control it may want to
optimize and use a single pool for incoming data.
Change-Id: Iec2a69bd2d7a127c7329d0423ab5ce6b73cb9904
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This option has not been used so far and will only contribute
unnecessary complexity in subsequent patches that introduce a concept
of combined RX buffers.
Change-Id: I53e0ce5155eebc352b84ba41b30ecb9d9958699f
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This analyzes the dlc stack using stack_analyze() which is coming
as 188 with BLUETOOTH_DEBUG_LOG off.
dlc stack (real size 320): unused 68 usage 188 / 256 (73 %)
So increase the stack size to 256.
Change-Id: Ie5d5f267f4f618747551f0bfd0e05ffb47e0bb91
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
The Cortex-M0(+) and in general processors that support only the ARMv6-M
instruction set have a reduced set of registers and fields compared to
the ARMv7-M compliant processors.
This change goes through all core registers and disables or removes
everything that is not part of the ARMv6-M architecture when compiling
for Cortex-M0.
Jira: ZEP-1497
Change-id: I13e2637bb730e69d02f2a5ee687038dc69ad28a8
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The Cortex-M0(+) and in general processors that support only the ARMv6-M
instruction set can only access the NVIC_IPRn registers with word
accesses, and not with byte ones like the Cortex-M3 and onwards. This
patch addresses the issue by modifying the way that _NvicIrqPrioSet()
writes to the IPRn register, using a word access for Cortex-M0(+).
A similar issue is addressed for internal exceptions, this time for the
SHPR registers that are accessed differently on ARMv6-M.
Reference code taken from CMSIS.
Jira: ZEP-1497
Change-id: I08e1bf60b3b70579b42f4ab926ee835c18bb65bb
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Since the value is treated as uint8_t internally anyway, just use
uint8_t for the input and output parameter types.
Jira: ZEP-1497
Change-Id: I61d68eb39cba5d82dad6ab7593b267c26e003d2b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Let's make net stack having its own level of debugging through sys_log.
It replaces NET_DEBUG by NET_LOG_ENABLED, which is then semantically
better: someone wanting to log the errors might want that not only for
debugging.
Along with it, CONFIG_NET_LOG_GLOBAL option is added, in order to enable
all available logging in network stack. It is disabled by default but
might be found useful when warning/errors need to be logged, so it is
then unnecessary to selectively enable by hand all CONFIG_NET_DEBUG_*
options.
It is possible, locally, to override CONFIG_SYS_LOG_NET_LEVEL by setting
the level one want to NET_SYS_LOG_LEVEL. This can be useful on samples
or tests.
Change-Id: I56a8f052340bc3a932229963cc69b39912093b88
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It's possible to know from which pool the nbuf comes from so
let's reduce nbuf size by removing its internal type attribute which
becomes then useless.
When a data buffer is not coming from nbuf data buffer pool, let's call
it "EXTERNAL", just to make debugging handling a little simple in the
code.
Change-Id: I6931394c8c4f594137f6380be0a0ba5cea371040
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
User application can request the information it wants via the generic
net_mgmt() call, following the NET_REQUEST_STATS_* codes.
Change-Id: Ia9e7d318cf11b7bf8bfaf1ad63c8c985be846cc1
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This will be useful for net mgmt based API to grab statistics.
Change-Id: Id3904c48cfdd6c6fb01b6919948eb13af826ca1e
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This will help to track only what's wanted (ipv6, tpc, udp, else...) if
needed to.
Change-Id: I5c2e5e582db629b5d0e1cd98004f693c50f532a4
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Let's change from macros to inlined function to make things nicer.
Change-Id: Ie98e0667613961b03c84ca60bc551d0f473765f6
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It will be thus possible to enable only the error logging, or the other
sys_log levels.
Change-Id: I0c0ed789f7cfbb4811320e8f8249151288274873
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This moves the shell component into its own subsys and groups all
related files and options into a single place.
Additionally, one Kconfig option will now be required to enable the
shell:
CONFIG_CONSOLE_SHELL=y
The header files was also moved to include/shell/shell.h and can be now
referenced with
#include <shell/shell.h>
instead of
#include <misc/shell.h>
Updated documentation as well.
Change-Id: Iffbba4acfa05408055e9fd28dffa213451351f94
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Introduce random device API analgous to other device driver classes in
Zephyr. Modify the the KSDK random driver to implement the API.
We retain the sys_rand32_get() interface for now on the assumption it
will eventually relocate to or be otherwise replaced by an entropy
management system.
The existing TEST_RANDOM_GENERATOR related drivers that do not
generate entropy are not modified to expose this driver API since they
cannot generate entropy.
Change-Id: I60b2d5afddf242e802a1d9014c99579870fb7472
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
A very common pattern in code goes something like the following:
memcpy(net_buf_add(buf, len), data, len);
To avoid having to create this kind of complex constructions every
time, this patch adds a new API which simplifies the call:
net_buf_add_mem(buf, data, len);
Change-Id: Ic1aeae4baf88b2295d139f672d5d265db2ddbe7b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
One missing ARG_UNUSED is added by this commit.
Change-Id: I4d9275cd7de4675a960adc67018633dcf8bdc034
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Makes possible to append user UUID to context to be able later iterate
it on subsequent resolving process.
Jira: ZEP-1112
Change-Id: I193ff1cee199045c9686dc4ca200adf19db377e4
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
The buf.h header file is a more natural place for these than the
hci_driver.h file.
Change-Id: I1eedcf03ae6ffa374403b382ec665ae554d6847b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Not all users are in an ISR context where we can't block, so give the
callers the freedom to choose if they want to block or not.
Jira: ZEP-1481
Change-Id: I19bd7e2df94c4eeb60886a17a78f872bd7bea887
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If more inquiry results were received during discovery than fits in
storage results with lowest RSSI will be skipped. This is to improve
API usefulness in busy environments where results with low RSSI (likely
more far away than high RSSI) could consume provided result space,
Change-Id: I1e9ca901b693f608d58575916809e8bd8bfe710f
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
If an attribute has no special access permissions (e.g. it's
notify-only) it would set the permissions to 0. Having a dedicated
enum value for this makes the code a bit more readable.
Change-Id: I0d3d8716a2544379353148735ba29b1a137f7173
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Some tick frequencies lend themselves to optimized conversions from ms
to ticks and vice-versa.
- 1000Hz which does not need any conversion
- 500Hz, 250Hz, 125Hz where the division/multiplication are a straight
shift since they are power-of-two factors of 1000.
In addition, some more generally used values are made to use optimized
conversion equations rather than the generic one that uses 64-bit math,
and often results in calling compiler intrinsics.
These values are: 100Hz, 50Hz, 25Hz, 20Hz, 10Hz, 1Hz (the last one used
in some testing).
Avoiding the 64-bit math intrisics has the additional benefit, in
addition to increased performance, of using a significant lower amount
of stack space: 52 bytes on ARM Cortex-M and 80 bytes on x86.
Change-Id: I080eb338a2637d6b1c6838c119af1a9fa37fe869
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Like ceil() for real numbers, but for fractions.
Change-Id: I8387732a2b2fd8b5c2bed57a78726eab7cea2c5b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Introduce tap and double tap triggers to the sensor interface.
Change-Id: Ic91d73e4393d643abc4119850d5b02164b1b6843
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Document that when passing NULL to k_free, nothing happens.
Jira: ZEP-1475
Change-Id: I0efab2c8c670b0cebfd3e72aa8cd64857798abea
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This patch adds the ARG_UNUSED macros to some function arguments
to avoid compiler warnings.
Change-Id: Iae2cd3018c9442ffa9268fdfd33eb9a21f55087c
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This commit adds the ARG_UNUSED macro to some function arguments
to avoid compiler warnings when some sections are compiled out.
Change-Id: Ic003c5a6b2757112cbcf9111fceb14c0f8ea352a
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Use size_t instead of int to avoid the following compiler warning:
warning: comparison between signed and unsigned integer expressions
Change-Id: I1dcd275e685f5c35793bdbf5ba0acc28ae4b181c
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Use a short name for this option CONFIG_OBJECT_TRACING.
Change-Id: Id27de7ef9ca299492b6b7d2324d9f5bcf8059a31
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move logging out of misc/ to its own subsystem. Anything related to
logging and any new logging features or backends could be added here
instead of the generic location in misc/ which is overcrowded with
options that are not related to eachother.
Jira: ZEP-1467
Change-Id: If6a3ea625c3a3562a7a61a0ba5fd7e6ca75518ba
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
That module is not used anymore: it was introduced pre-Zephyr to add
some kind of awareness when debugging ARM Cortex-M3 code with GDB but
was never really used by anyone. It has bitrotted, and with the recent
move of the tTCS and tNANO data structures to common _kernel and
k_thread, it does not even compile anymore.
Jira: ZEP-1284, ZEP-951
Change-Id: Ic9afed00f4229324fe5d2aa97dc6f1c935953244
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Minimal frame size is 60 bytes, but IP frame might be smaller than this
size minus the ethernet header. In that case, Ethernet frames are padded
so it does reach this minimal size. In this case, ethernet L2 should
update the buffer list so it remove the padding length from the whole.
Change-Id: Id370cad09ad82bb54febeb60b05f7e430cc8f963
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This patch introduces a k_sem that will block until:
- data is received, or
- the user-provided timeout expires
This change allows us to simplify our previous DNS client
implementation.
This change is related to ZEP-1357 because we are refactoring the
DNS client API removing the continuous update of the net_context_recv
routine that seems to be causing issues after the kernel's update.
Jira: ZEP-1357
Change-Id: If01c9274ac8f096f0095a2872f86be2e007212ee
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This commit introduces the dns_context structure.
This new structure will reduce stack overhead due to
the simplication of the dns_resolve routine signature.
Furthermore, the timeout parameter is now int32_t
instead of uint32_t.
The dns sample application is also updated.
Change-Id: I5d789656bacbd23c4654edce5d116a88dc42c354
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
TinyDTLS is gone, so in this patch we are removing the tinydtls.h
header.
Change-Id: I7deddc554ac5c2fc952565a2df2e4c46e7cd2f6e
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
RFCOMM channel range is 1 - 30, 0 and 31 shall not be used since
the corresponding DLCIs are reserved in GSM.
Change-Id: I63ff188e06007208b629a3e3bc22681c0bad239b
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
For very constrained systems, like bootloaders.
Only the main thread is available, so a main() function must be
provided. Kernel objects where pending is in play will not behave as
expected, since the main thread cannot pend, it being the only thread in
the system. Usage of objects should be limited to using K_NO_WAIT as the
timeout parameter, effectively polling on the object.
Change-Id: Iae0261daa98bff388dc482797cde69f94e2e95cc
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
nano_cpu_idle/nano_cpu_atomic_idle were not ported to the unified
kernel, and only the old APIs were available. There was no real impact
since, in the unified kernel, only the idle thread should really be
doing power management. However, with a single-threaded kernel, these
functions can be useful again.
The kernel internals now make use of these APIs instead of the legacy
ones.
Change-Id: Ie8a6396ba378d3ddda27b8dd32fa4711bf53eb36
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Not a functional bug per-se since they resolve to the same thing, but a
conceptual error nonetheless.
Change-Id: Ia11f6bd272cabe8da21d59e3378b8348f034e814
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Use _INACTIVE instead of hardcoding -1.
_EXPIRED is defined as -2 and will be used for an improvement so that
interrupts are not locked for a non-deterministic amount of time while
handling expired timeouts.
_abort_timeout/_abort_thread_timeout return _INACTIVE instead of -1 if
the timeout has already been disabled.
Change-Id: If99226ff316a62c27b2a2e4e874388c3c44a8aeb
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The Cortex-M3/4 kernel was reserving priorities 0 and 1 for itself, but
was not registering any exception on priority 0. Only reserve priority 0
and use it for SVC and fault exceptions instead of priority 1.
Change-Id: Iff2405e27fd4bed4e49ab90ec2ae984f2c0a83a6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
There are now three flags that decide how many priorities are reserved
by the kernel, each one requiring one priority level: Zero Latency
Interrupts, BASEPRI locking (for SVC usage) and faults that are not at
priority -1, so that taking them in an ISR actually triggers the fault
synchronously.
Change-Id: I7f4d760c9110051aeb82dcfd8cd68026a9b74b54
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This allows using it in _EXC_PRIO() instead of hardcoding 2 and 3.
Change-Id: I3549be54602643e06823ba63beb6a6992f39f776
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This is a left-over that should have been renamed to the new
net_buf_alloc_debug function name.
Change-Id: Iefcbd2eefab5614b1b80214cb0927f3db77d592e
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When going into DEEP_SLEEP state, the ARC timer
needs to be restored.
This implements the function to restore the timer
after sleep.
As the time spent during sleep is not currently known,
the timer is expired to reschedule the application task.
Jira: ZEP-1224
Change-Id: I22a30d0fd79f177cf166b9a29dc78d68f7d7fbad
Signed-off-by: Julien Delayen <julien.delayen@intel.com>
Move interrupt initialization for the ARC to its own
device. The init function for the arc will be only
doing platform specific operations
Jira: ZEP-1288
Change-Id: Icb04c3622890021c65cd24cecf6cafee6c37caf9
Signed-off-by: Julien Delayen <julien.delayen@intel.com>
Following commit fc21a76db6
Some more fixes are needed.
Change-Id: I19c2c979d44be5edfd76041d3cf4507860795c78
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Using a LIFO instead of a FIFO has the potential benefit that more
recently in-use buffers may be "cache-hot" and therefore accessed
faster than least recently used (which is what we get with a FIFO).
Change-Id: I59bb083ca2e00d0d404406540f7db216742a27cf
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Since the user data size is now stored in the pool there's very little
value in storing it as well per-buffer.
Change-Id: I17a99123b232423c52a2179b4eccd813728d51b1
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In order to keep the initialization process light-weight, remove
net_buf_pool_init() and instead perform the initialization of the pool
and buffers in a "lazy" manner. This means storing more information
in the pool, and removing any 'const' members from net_buf. Since
there are no more const members in net_buf the buffer array can be
declared with __noinit, which further reduces initialization overhead.
Change-Id: Ia126af101c2727c130651b697dcba99d159a1c76
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This is only for use with custom destroy callbacks, so that the
application gets isolated away from the details of how exactly the
buffers are managed. This opens up the possibility of switching away
from k_fifo to potentially better solutions, such as k_lifo.
Change-Id: I0d8322fdec3500d8ae060ae471b9448aeaa4572a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Remove SENSOR_VALUE_TYPE_INT as it is the same as
SENSOR_VALUE_TYPE_INT_PLUS_MICRO with val2 set to 0.
Change-Id: If5a9c579b7267701c27f40fd887acae47d64edc5
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
Remove SENSOR_VALUE_TYPE_Q16_16 as it is not used by any driver. Future
drivers can use any of the remaining value types.
Change-Id: I984143cc65d6a6fd0477f310ac17c62498cc05b8
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
Until now it has been necessary to separately define a k_fifo and
an array of buffers when creating net_buf pools. This has been a bit
of an inconvenience as well as blurred the line of what exactly
constitutes the "pool".
This patch removes the NET_BUF_POOL() macro and replaces it with a
NET_BUF_POOL_DEFINE() macro that internally expands into the buffer
array and new net_buf_pool struct with a given name:
NET_BUF_POOL_DEFINE(pool_name, ...);
Having a dedicated context struct for the pool has the added benefit
that we can start moving there net_buf members that have the same
value for all buffers from the same pool. The first such member that
gets moved is the destroy callback, thus shrinking net_buf by four
bytes. Another potential candidate is the user_data_size, however
right not that's left out since it would just leave 2 bytes of padding
in net_buf (i.e. not influence its size). Another common value is
buf->size, however that one is also used by net_buf_simple and can
therefore not be moved.
This patch also splits getting buffers from a FIFO and allocating a
new buffer from a pool into two separate APIs: net_buf_get and
net_buf_alloc, thus simplifying the APIs and their usage. There is no
separate 'reserve_head' parameter anymore when allocating, rather the
user is expected to call net_buf_reserve() afterwards if something
else than 0 headroom is desired.
Change-Id: Id91b1e5c2be2deb1274dde47f5edebfe29af383a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Last argument for k_stack_init is of time int resulting in UINT_MAX
being converted to negative value. Instead of UINT_MAX use maximum
possible number of entires that won't result in stack->base and
stack->top overflow.
Change-Id: I8470f6dd18abcccc72590e07e0d0efd4ce2208cc
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Hamming Weight or "popcount" consists in counting the number of bits set
to 1 in a particular word. This commit adds a macro to be able to use
the existing builtin for this purpose with the GCC compiler.
Change-Id: Iec64c19e897de2bc02e981071465bbe230ee9add
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The ARG_UNUSED macro is added to avoid compiler warnings.
Change-Id: If14c3928a30c8f3156cdcd0fe11e22407a78c088
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Applications may want to know how much time is left until a delayed
work gets scheduled. To prevent applications from having to track this
themselves simply use the information that's already embedded as part
of the timer that's part of the delayed work struct.
Change-Id: I189df2f3be8b207e68b554a0cbb4f97f1a99de22
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Factor out the code for evaluating the remaining time for _timeout
structs so that it can also be used for other objects besides k_timer
structs (like k_delayed_work, coming in a subsequent patch).
Change-Id: I243a7b29fb2831f06e95086a31f0d3a6c37dad67
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Device_sync_call related APIs and typedef are actually wrappers
for kernel semaphores. These APIs and typedef will be
deprecated. Let's add deprecated attribute to give deprecation
warning.
Jira: ZEP-1411
Change-Id: Ia07557cc81bd9ee8e41f2e17be4607c4bd6d23bd
Signed-off-by: baohong Liu <baohong.liu@intel.com>
Use the SYS_INIT() mechanism to invoke the sys_rand32_init() function
in random drivers that require an initializer. Remove all empty
sys_rand32_init() instances.
The existing explicit sys_rand32_init() function runs immediately after
PRE_KERNEL_2 before stack canaries are initialized. In order to get
equivalent behaviour with sys_rand32_init() we set SYS_INIT() to
initialize the random drivers at the lowest priority of PRE_KERNEL_2.
Change-Id: I4521e44daac806bc4eef01ce7fdf2ba5367e0587
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
There are some corner cases where direct access to the formatter
function is needed. Export _vprintk() so code can use it in a similar
way that _prf() can be directly used.
Change-Id: I9dfb68f87f310e900c662dc8beb320bb4ff7d8b2
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
After some more careful measurements, the worst measured overhead is
288 bytes. Adjust BT_STACK_DEBUG_EXTRA correspondingly to 300 (to give
a bit of playroom still on top of this).
Change-Id: Icdf477b05b40917027314b180c2b69c8c6c759b3
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
BT_STACK_DEBUG_EXTRA was adjusted by commit 047c6eacf7,
however it failed to cover this #ifdef section in log.h.
Change-Id: I1a9cd81dc25e9465daba62f0116b2661ac047362
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This will be used by the user to disconnect or cancel connect dlc.
This also defines an internal close function which will take
appropriate action based on the dlc state.
In case of user initiated disconnection if some pending packets are
there in queue then it has to be sent before sending DISC packet.
< ACL Data TX: Handle 256 flags 0x00 dlen 8
Channel: 64 len 4 [PSM 3 mode 0] {chan 0}
RFCOMM: Disconnect (DISC) (0x43)
Address: 0x2b cr 1 dlci 0x0a
Control: 0x53 poll/final 1
Length: 0
FCS: 0x6d
> ACL Data RX: Handle 256 flags 0x02 dlen 8
Channel: 64 len 4 [PSM 3 mode 0] {chan 0}
RFCOMM: Unnumbered Ack (UA) (0x63)
Address: 0x29 cr 0 dlci 0x0a
Control: 0x73 poll/final 1
Length: 0
FCS: 0x26
Change-Id: Ie4fa3bd8f6b279fee6fb56ddce198d82c5047849
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Now that printk is the default backend for logging the overhead is not
as bad as with printf. 160 seems to be roughly the worst case amount
of overhead that debug logs now cause.
Change-Id: Ia5937b7318e00cc31c72fa1702c73a57bca0603a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Instead of %2.2x we should use %02x since printk doesn't (currently)
support the former.
Change-Id: I773972e63071b81c95c65de292f12ab14d7c310b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There's now snprintk available that's more light-weight on the stack
than snprintf.
Change-Id: I6b3e4409703ca92fe6b8f4146ff47c490ab826cb
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Applications may want finer control of the NRPA used for
non-connectable beacons, and provide it up-front rather than letting
the stack generate one.
Change-Id: I84d459372cc85ed09a8f9cde16dbb9b98dec2a43
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Expose helpers in hci.h for setting and getting the LE random address
type.
Change-Id: I7c6437051f0b2d1f5f79e19b2616bb643ae6300b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Having the logging macros arbitrarily mapping to printk or printf
based on selected Kconfig options that the app isn't necessarily aware
of can have unexpeced (bad) side effects. In particular, printf
consumes *a lot* more stack (closer to 512 bytes) than printk, so
enabling a seemingly innocent CONFIG_STDOUT_CONSOLE option could lead
to stack overflows that are hard to debug.
Jira: ZEP-1419
Change-Id: I5fd77a7ed402e9ca67af23857e0f886f96d243bc
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This patch adds the clock_control implementation for the ARM LTD
Beetle platform.
The main features enabled are:
* Clock on and off in ACTIVE, SLEEP and DEEPSLEEP mode.
* PLL support (freq: 12, 36, 48 Mhz).
The integration with the existing drivers will be done in future
patches.
Jira: ZEP-1300
Change-Id: I07cb2325275bd86a036e8e24aeb7bbf2c6176a93
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Add the clock driver for the STM32L4 series.
Change-Id: Icdf79061f163d8d00187b382d1564422fb875c5b
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
These correspond to the libc snprintf and vsnprintf APIs.
Change-Id: If3944972ed95934a4967756593bb2932c3359b72
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Pass a parsing context around, allowing counting the number of
characters written, which is then returned in the return value of
printk(). This makes printk more similar to printf and prepares the
way to extend the implementation to support printing to strings.
Change-Id: Ib28a18a4f36fc58b98b228fd5763b2c05f5af7bc
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Drop the unnecessary trailing whitespace formatting in inline asm.
Change-Id: I351df91b7175fe21d268d325865838b4840def8d
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Replace the use of a hardwired temporary register in the irq_lock()
implementation with a local variable. This will allow the compiler
more flexibility in register allocation.
Change-Id: Ifbdb52fca1d40404d55934343ac2a8153df7e1a8
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
The cortex-m4 irq_lock() implementation uses a movs instruction, thus
clobbering the condition code, but does not include the clobber in the
asm clobber list. This is a bug in the situation where the compiler
schedules a live condition code over the inline lock instructions.
Since the irq_lock() implementation does not need to kill the CC we
simply switch to mov from movs.
Take the opportunity to drop the unnecessay .n and let the assembler
choose an appropriate encoding.
This fixes a bug found by inspection, it has not actually been
observed in real code.
Change-Id: Id60fa3362df9d4bf05c3d5e23066410ede92d73c
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Memory accesses could be reordered before an irq_lock() or
after an irq_unlock() without the memory barriers.
See commit 15bc537712 for the
ARM fix for a complete description of the issue and fix.
Change-Id: I1d96fe0088d90150f0888c2893d017155fc0a0a7
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Memory accesses could be reordered before an irq_lock() or after an
irq_unlock() without the memory barriers.
See commit 15bc537712 for the ARM fix for
a complete description of the issue and fix.
Change-Id: I056afb0406cabe0e1ce2612904e727ccce5f6308
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Memory accesses could be reordered before an irq_lock() or after an
irq_unlock() without the memory barriers.
See commit 15bc537712 for the ARM fix for
a complete description of the issue and fix.
Change-Id: Ic92a6b33f62a938d2252d68eccc55a5fb07c9114
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Add the missing memory clobber to irq_unlock() in order to prevent the
compiler reordering memory operations over the unlock.
Change-Id: If1d664079796618ed247ff5b33b8b3f85fb7e680
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
The inline asm definition of irq_lock() on the ARM architecture marks
the ASM as volatile which prevents the compiler from removing the
isntruction but does provide any information to the compiler to
prevent the inline ASM instruction being re-ordered relative to other
instructions. The instruction used in irq_lock() do not touch memory,
however in order to acheive their intended purpose they must be
ordered relative to other memory access instruction. This is acheived
by adding the "memory" clobber.
Instances of the compiler inappropriately re-ordering irq_lock() calls
relative to other instructions without this patch can be observed in
the code generated for k_sleep() on NRF51 target boards.
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Change-Id: I9d42d54cd9a50e8150c10ce6715af7ca2f5cfe51
Currently it's only possible to configure those GPIOs through
boards.<h/c> files and thus it's not relevant for board that do not
embed cc2520 but might get one wired to it, unlike
quark_se_c1000_devboard which directly embeds one cc2520.
Change-Id: I819bc1d2de707ea12eb70dc60a40b28f92666e51
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This commit adds HTTP message handling support for Zephyr.
So, no network routines are involved at this level.
To add HTTP message handling support for Zephyr, we explored the
following options:
1. Importing an external project and perhaps adapting it to fit our
requirements.
The criteria to pick one codebase among all the available projects
are: licensing, correctness and performance.
2. Writing our own implementation from scratch.
We decided to import an external project instead of implementing our
own parser, mainly due to code maturity and correctness. It could take
more time to obtain a production-ready parser from scratch than adapting
a state-of-art library.
The following is a list of some projects offering similar functionality.
lighttpd (many files)
* License: revised BSD license
* Supported: active
* Comments: this parser can't be integrated to Zephyr due to
dependencies that currently are not satisficed by our SDK.
nginx (src/http/ngx_http_parse.c)
* License: 2-clause BSD-like
* Supported: very active
* Comments: this parser can't be integrated to Zephyr due to
dependencies that currently are not satisficed by our SDK.
wget (src/http-parse.c)
* License: GPL 3.0
* Supported: very active
* Comments: this code can't be included in Zephyr due to
licensing issues
curl (lib/http.c)
* License: MIT/X derivate, see:
https://curl.haxx.se/docs/copyright.html
* Supported: very active
* Comment: it must be forked and adapted to run in Zephyr.
It is not optimized for low-power devices.
nodejs http-parser (http_parser.c)
* License: nginx license (2-clause BSD-like) and MIT license
* Supported: very active
* Comments: optimized with performance in mind.
From https://github.com/nodejs/http-parser: "It does
not make any syscalls nor allocations, it does not buffer data,
it can be interrupted at anytime. It only requires about 40
bytes of data per message stream."
So, nodejs/http-parser looks a very good choice for Zephyr. In this
commit, we integrate nodejs' parser to Zephyr.
Origin: https://github.com/nodejs/http-parser/releases/tag/v2.7.1https://github.com/nodejs/http-parser/archive/v2.7.1.tar.gz
NOTE:
This patch reformats the http_parser files to reduce checkpatch
warnings. Changes made in this refactoring are available at:
Repo: https://gitlab.com/santes/http_parser/commits/refactoring1
Commit: 9ccfaa23f1c8438855211fa902ec8e7236b702b1
Jira: ZEP-346
Jira: ZEP-776
Change-Id: I29b1d47f323a5841cd4d0a2afbc2cc83a0f576f0
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Create a variable in nbuf metadata area for storing TCP
buf_sent information.
Change-Id: I21a85c58183f1e4997d03d4a93546ddd9b32e977
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Hook up TCP transmission through the net_context_send() API. Queues
packets via a list in the net_buf header, but as of right now simply
transmits the queue synchronously, ignoring the need for retransmit
and the limits of the receive window on the other side.
Requires that the ACK transmission be moved ahead of the net_context
callback invokation. This to work around a glitch in the way ACKs
work with queueing (they depend on current state, but packets are
assembled just once) that will be fixed in a coming patch.
Change-Id: I7490333e4b314e7734fcc03f2a63d76ae89d698a
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
The cc2520 driver RX thread did not like the stack information
collection macros defined in net_core.h. Both the cc2520 TX and
RX got the same variable name which did not compile.
This is now changed so that the first parameter is added to
the variable name to create a unique variable.
Change-Id: Ia41d01a71afd73af2ef31aa5f7a890a3cf0385aa
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As the native IP stack is now the default, there is no need
for corresponding Kconfig option.
Change-Id: I08e4992f540f928a2b7378e8803e634e38725348
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit removes the legacy Contiki based uIP stack.
The new native IP stack must be used after this commit.
The commit also removes following things:
- legacy cc2520 driver
- legacy ethernet drivers
- legacy IP stack samples
and changes these things:
- disabled tests that only work for legacy IP stack
- select new IP stack by default
- enable random number generator by default as it is needed
by the new IP stack
Change-Id: I1229f9960a4c6654e9ccc6dac14a7efb9394e45d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is to be used in net-shell to view currently
available network connections.
Change-Id: Iadb6555ed6db4e8fb0639e6d0dcf1eccd970acca
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If IP stack offloading is enabled, then call corresponding
L2 driver when corresponding net_context API function is
called. The L2 driver can then do its magic to send/recv
IP packet or do what ever with it.
Change-Id: I26695cee6feb80a41923db0165f22d94477333be
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This code is inspired by a similar feature found in ccan[1],
that enforces that the parameter passed to ARRAY_SIZE() is
always an array and not a generic pointer. This is a slightly modified
version that will work if the macro is expanded outside of a function
body.
The check is performed by comparing if typeof(array) and
typeof(&array[0]) are of a different type. Due to the way arrays
decays to pointers in C, if one passes a pointer, the types won't be
compatible and a compile time assertion will fail.
No bugs have been found with this change, but since there's no runtime
or size overheads, there's no reason to not enable it.
[1] https://github.com/rustyrussell/ccan/blob/master/ccan/array_size/\
array_size.h
Change-Id: I6c321714d0024298e593176be43b2d0b5362cc0d
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
This macro does two things: first, it validates that the pointer is not
NULL. Second, it validates if it's between the first and the last
element in the array.
This is useful for cases where a pool of structures are used, such as
in the network subsystem.
Change-Id: I9d815936e31d87a3b3ff80466eea97bc4ad954b5
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
The macro defines the stack as usual, but if user has
enabled net shell (CONFIG_NET_SHELL), then additional
information about the stack is stored in net_shell
linker section. The information in the net_shell linker
section is then used to print information about the
stacks in the networking sub-system.
Change-Id: Ic6e9f16a73a192b9a59d32a6d0070322382f98bd
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The original version can fail in ARM like this
***** USAGE FAULT *****
Executing thread ID (thread): 0x200027a8
Faulting instruction address: 0x00008080
Unaligned memory access
Fatal fault in thread 0x200027a8! Aborting.
so use UNALIGNED_PUT() and UNALIGNED_GET() instead.
This failure was seen when IPv6 address was
copied to neighbor cache in ipv6.c:nbr_new().
Change-Id: I638424b9a95c451e13314ca9182c39ab8aa71830
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If CONFIG_INIT_STACKS is not enabled but CONFIG_NET_SHELL is,
then net_analyze_stack_get_values() was not properly compiled
out which caused unknown function call.
Change-Id: I18de5ec0b5d6ab7876e801c83b82c9dd5bf22093
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit adds the MQTT high-level API with Quality-of-Service
support. The following MQTT messages are covered by this commit:
CONNECT (tx), DISCONNECT (tx), PUBACK (tx, rx), PUBCOMP (tx, rx),
PUBREC (tx, rx), PUBREL (tx, rx), PUBLISH (tx), PINGREQ (tx),
SUBSCRIBE (tx), UNSUBSCRIBE (tx), CONNACK (rx), PINGRESP (rx),
SUBACK (rx) and UNSUBACK (rx).
Where 'tx' stands for transmission: routines that create and send
messages. 'rx' stands for reception: routines that receive an RX
buffer from the IP stack and parse the MQTT mesage contained in
that buffer.
Jira: ZEP-365
Jira: ZEP-591
Jira: ZEP-856
Change-Id: Ibee701a298127eb713aa3fde5aaf7d089ecd1b9d
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Updating the API documentation to use K_NO_WAIT instead of 0.
Change-Id: I10ba31fe116210443f383b343993c3cca830a7c2
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Dropping legacy API. This commit also contains updated
unit tests in order to pass the test.
Change-Id: Ibc7426837e2f4f23bb5f3ed3719635c5c3d0ed0f
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Origin: Original
Based on "IEEE Std 802.3-2008, Section 2" Chapter 22.2.4
Change-Id: I08516dd1c2f74c1324d00d665f221e01af25d7f1
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Replace NANOKERNEL by POST_KERNEL in the net stack.
Change-Id: Iaad7cdbe849741bc1cf18b0ccf7264417a9495d6
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The functions that return the start of the UDP and TCP buffers,
did not take the IP extension header length into account.
Change-Id: Ie3e2fbc49365de9176a788b54ab628e6ef37f5ee
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
More logical place for net_ipv4_broadcast_address() is in ipv4.c
instead of net_if.c.
Change-Id: I069f5030963bcb809df34e874054e2b7826ff868
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
More logical place for net_ipv6_unspecified_address() is in ipv6.c
instead of net_if.c. Removing the net_if_ipv6_unspecified_addr()
variant as it is no longer needed.
Change-Id: Ib5b4f6748030a8bf50fb848a87eef2968e2bcbc8
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add function that returns IPv4 any address (all bits are zero).
Change-Id: I8816f7f264ad3a98fced7089f0b94220603c2291
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of appending the LQI into the buffer, which is an awkward usage.
Change-Id: I2f604cd61ef3b309cdfe304dac0ab1e7a2ca3f6a
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If net_send_data() returns 0, then the buffer was sent ok
and the sending device driver has already freed the buffer.
If net_send_data() returns <0, then the buffer sending failed
and the caller can either try to fix the issue and re-send the
buffer, or the caller can unref the buffer. Normally caller
should unref the buffer in this case as there is not much that
can be done here.
Change-Id: I39d7b22bbb78a9c16fd037f3a066797e455c31fd
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The pos and len variables were in incorrect order.
The pos is first before the len variable.
Change-Id: I0b078ce2f08923c1673bd918fc03adb2ff09691a
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit adds support for the MQTT protocol v3.1.1.
Specifically, this commit allows a Zephyr application to create
the following MQTT messages:
CONNACK, CONNECT, PUBLISH, PUBACK, PUBREC, PUBREL, PUBCOMP, UNSUBACK,
SUBSCRIBE, SUBACK, UNSUBSCRIBE, PINGREQ, PINGRESP, and DISCONNECT.
Furthermore, the following messages can be parsed by the routines
provided by this commit:
CONNACK, CONNECT, PUBLISH, PUBACK, PUBREC, PUBREL, PUBCOMP, UNSUBACK,
SUBSCRIBE, SUBACK, PINGREQ, PINGRESP and DISCONNECT.
NOTE: client behavior (routines with network access) and QoS will be
integrated in future patches.
The MQTT v3.1.1 specification can be found at:
http://docs.oasis-open.org/mqtt/mqtt/v3.1.1/mqtt-v3.1.1.html
Origin: Original
Jira: ZEP-365
Jira: ZEP-591
Jira: ZEP-856
Change-Id: Ie0c179370cea22f7554564692bc426a8d5c419d2
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This is needed by net-shell module.
Change-Id: Ic93f806a5882592ff1769b4a14b6ed524ba14912
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Separate the calculation of stack utilization variables and
printing the values from each other so that it is possible
to use separate printing function to print the values.
Change-Id: I3a5827c08edea5017e2a4bc1c5be2fe419cdfcb8
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This function converts a string into an IP address.
Change-Id: If57983a345fe4c18df01e58dbce7d9a50a27b82a
Signed-off-by: Jaakko Hannikainen <jaakko.hannikainen@intel.com>
This creates a `struct net_conn_handle` that's only used as an opaque
pointer. The purpose is to avoid assigning a void* to a void** in
connection registering/unregistering functions, avoiding a
previously-caught bug by issuing an incompatible pointer types warning:
warning: passing argument 7 of 'net_tcp_register' from
incompatible pointer type [-Wincompatible-pointer-types]
Suggested by Andy Ross in 5beec6. This particular commit didn't catch
any bugs, but the one caught in 5beec6 wouldn't exist if this were in
place at the time.
Change-Id: I5c13fb4c5826adce6397feb7b400d36e426c4a87
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
The allocated space for IPv6 string was too short by 10 chars
which meant that full IPv6 address was not printed correctly.
Change-Id: I9c7f3f118f486f88e769aaadf09d100a1d4fd6bc
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Utility function that can add option bits to IPv6 option bitmap.
Change-Id: Ia10d27c201556fb960a736590788b791a7e3c018
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
RPL implementation taken from net/ip/contiki/rpl and
ported to use the new stack.
Origin: Contiki
Change-Id: I479d9dd143b763f90cb7915806fd7e9faea0300c
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add utilities to return network interface link local and
global IPv6 addresses.
Change-Id: I54d0ec28410b9ad4ad7068a887bfa6706453159c
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Go through the router list and return the default router
where to send the network packet.
Change-Id: I87e5118b03352b7d11e1fde800d1530e5929ebab
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Helper checks if the IPv6 address belongs to one of the subnets
defined for network interfaces.
Change-Id: I0e88ebe5014a514404b589e32cc71590950a39c7
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The other part of the stack can register a handler that is
called after the network packet has been sent. This callback
is used by RPL routing code.
Change-Id: I6b76c5f01d1f6706b0c0a56980ad50e1b85fc427
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is meant if only one needs reliability when sending non-TCP packets
(as TCP would make is redundant).
Change-Id: I7dc605094b422a750424c3498d18f32d809d23a8
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
For future purpose, let's not occupy a full byte for a unique boolean.
Change-Id: I36f2824cca4806eb90640a71ed3cea37a353b276
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Including net_if.h can makes things looping, as this one will include
net_l2.h, which one might include a technology that will in turn include
net_mgmt.h again.
Change-Id: I514720875937414167f0396edb9147ed29dd6d69
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Up to the part declaring mgmt request to define such handler. This is
meant to avoid such warning:
warning: implicit declaration of function ...
Change-Id: Ide6e9abf886169c26d81fe6b5c7bc280e1ac4e4d
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
net_l2 is the proper name, looked by sanitycheck.
Change-Id: I08548865df21a57c8198fe0a801aa8c2a81b7fb0
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Add support for inserting data into an arbitrary location in fragment.
Change-Id: Iaecdc4e980a73e0f66c208315d342e05762cd6f5
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Add support for nbuf write to an arbitrary location in fragment.
Change-Id: I686c6d86feb8545603edd7c7a9ef6fde1c909a72
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
net_l2_init sections used to exist in early stage of the native IP stack
but got removed since.
Change-Id: I189d6e6f7aa05a6e5a62a28973c714d0367b0c5a
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This creates initial TCP handling logic but does not yet
enable fully working TCP connection.
Some of the connection logic is taken from FNET TCP
implementation.
Origin: FNET 3.6.1
URL: https://github.com/butok/FNET/blob/master/fnet_stack/stack/fnet_tcp.c
Change-Id: I1e100d9fa9c91437562b933d94d0bd3db1a5885e
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This way we avoid ugly casts in the calling code.
Change-Id: I9c949cf22ecd1603e9247a07240de5759bf85463
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Apparently, a copy-paste error: NET_CONTEXT_TYPE was used instead of
NET_CONTEXT_PROTO. The corresponding "set" function uses the latter,
so it for "get" too.
Change-Id: Ideb5bfaeb548222a6e64d53b782c9a111e3ef33b
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Current net_nbuf_write() api just appends data to last fragment. And
doesn't write data based on offset. That's why renaming this api.
New net_nbuf_write() apis based on offset will be coming soon.
Change-Id: Ie8e13e5f6091a279b62b6d8b0b3928a5187e75b0
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Valid case:
1) If the offset is more than current fragment length, adjusts offset
from next relevant fragment and starts reading or skipping.
2) If the read or skip length is more than available data length,
then throw an error.
In case of an error, frag is 'NULL' pos is '0xffff'. Rest of the cases
are successful read and skip.
Change-Id: I88c4b85e14e5821f681966b5148ba9519b91cca4
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The legacy stack has all the net_context API stuff in
net_socket.h so include it in net/net_context.h file.
This re-works the commit 627feb92d4 which added the
net_context_get_internal_connection() to net_context.h.
Now that function prototype is found in net_socket.h.
Change-Id: If22fa63357f4b2e9503f8c9850e69ffda39c61c7
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit adds support the DNS client API on top of the new
native IP stack. Some features of this implementation are:
- Support for IPv4 and IPv6
- Support for multiple concurrent queries. A net_buf structure is
required per context. See the DNS_RESOLVER_ADDITIONAL_BUF_CTR
configuration variable
Origin: Original
Jira: ZEP-793
Jira: ZEP-855
Jira: ZEP-975
Change-Id: I351a636462a1b78a412c9bce1ef3cd0fa6223a52
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Enum names are colliding with defines, which is bad.
Change-Id: Ia8c003983ddeb1ebed8a9210e682bcb21abfa687
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Re-ordering fields in struct net_nbuf in order to avoid
holes because of memory alignment.
Change-Id: I5a3ab31a0232003c161fd65848f70d83e07a75c9
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Code is actually meant to identify the part in the layer from which the
events originates. Adding or removing an address is a command.
Change-Id: I42b4823d2585b15851c4fdd91802a13d2a5759c1
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Currently, only address related changes are handled.
Change-Id: I2aa366518dae2725e58cbede4ccbe2ef19cd8b16
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This will be useful when creating request and/or event codes.
Change-Id: Ibc117b476c52d72c77924a245e1f263f583061f6
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The network interface naming macro is ignoring the
dev_name parameter. This can bring issues if having
more than one network interface in the system.
Change-Id: I7e975be61e82bd04bd865b0c4078607cbdef2230
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
As the function does not modify the IPv6 address,
it can be const.
Change-Id: I2af58a4954d8b6f0d71bc7d0d14ddf0f62f8ca7c
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
While doing some documentation for it, I realized names were not all
good and it missed some stuff:
- what belongs to event should contain "event" in it
- we have a structur as callback so let's type the handler as a handler
- let's add the request handler signature
Change-Id: I18822cbcdc3c10e33600d6db38abab5ca73a228c
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
L2 RAW channel allows to use some functions of IP stack for RAW access
of network drivers. It is hidden from user and is selected by 2520 raw
driver.
Change-Id: I91dd09803052072dfddb7989d9d67c3a5840f89e
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This adds the capability to raise an event, and for anybody to listen to
it.
Change-Id: I2287b43d678930c29391efa2ddf7b12652cc1bb6
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Define the ground mechanism to interact with the network stack.
Change-Id: Id2af76188967fa66e0f0d755a2c1dc8a85985540
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Two utility functions net_nbuf_read_be16() and net_nbuf_read_be32()
added which return either 16 or 32 bit big endian value.
Change-Id: I3401dde75669b429160c602a820359c800671afb
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit tries to improve inline documentation by refactoring
the original text. Missing information is also added, for example:
function return codes.
Change-Id: I940d4b6fa3e8079323e5e0ec1e5f63407505c9d9
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
The net_ipv6_set_reachable_time() was incorrectly named, the
correct name is net_if_ipv6_set_reachable_time().
The _if_ prefix needs to be there as the function is located
in net_if.c file.
Change-Id: Ic841328bdff92fbb90f51a199ebbee82d7b1c9fd
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Helper functions to read and write data across multiple fragments.
Write function always adds at the end of last fragment. If there is
no space in last fragment new data fragment will be created and added
to input buffer.
Read function start reading from offset of input fragment. If the
required data is located in mutliple fragments it reads from list
of fragments and returns position and fragment where read stopped.
Skip function start skipping from offset of input fragment. If the
required length is across multiple fragments it skip till length and
returns position and fragment where read stopped. This is useful
when reading with unwanted data (reserved or unhandled data).
These functions are quite useful when handling with multiple fragments.
Change-Id: I348b869108724602ae780a1cba4fe17d3af7ffc2
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
No need to store the nbr pool data into a dedicated section
as we have only one nbr pool defined.
Change-Id: I6f2afcce57b5f588878496bf085567b938e32c80
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the connection establishment has an error, the accept
callback needs to be able to return that error to user space
so that the application can know about it.
This is especially important in TCP where application needs
to start to listen again if reset is sent during connection
establishment.
Change-Id: I55f36e4f101c7237c1288f09baf6e602b33da2b3
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
So we can easily access TCP buffer that is stored
in net_buf.
Change-Id: I37ae728be45ded2fcc74735592d94897c945afbe
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This will remove given amount of data from the fragment list.
Change-Id: I17d809982af0b941f957205688ee61e5ac3c1f08
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is needed because if there are more than one network
interfaces configured, then the second interface will point
to wrong address. Only solution to this issue is to align
the net_if to 32 byte boundary. The issue was seen in qemu
and it is not really known if the issue is present in real
hardware.
Change-Id: I2048c8a9a0aab51f84c15539159410b544f6c9b1
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that the statisitics compilation can be done even
if some sub-statistics module is not compiled, like IPv6 or
IPv4 statistics.
Change-Id: I1a91acd70569f074d9bb3269f74ee9c6a0ea9cf7
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Some of the DEBUG options for the new IP stack still used
the CONFIG_NETWORK_IP_STACK_DEBUG_ prefix.
Change-Id: I8f039ac5e303a7c571a870403ce17d758db540d5
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Implementing the primitives for non-slotted CSMA-CA radio protocol
according to section 5.1.1.4 in the 2011 version of the specification.
Slotted version will come when Beacon frame will be supported, thus
getting PAN coordinator info from its superframe.
Change-Id: I0545ed953a3c48e6b8e9cd4082db01ed66ad098b
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
- new stack options are renamed and placed in their respective menus
- new stack Kconfig gets normalized (tabs vs spaces, etc...)
Change-Id: Ia68f6589fed464bbdd76dc0812775684b2f94a58
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This will be necessary for devices that require to instanciate more than
one network interface.
Change-Id: I01fd4eb220ed63a4fe073614fb2a132cd00c6bc8
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Add socklen_t addrlen parameter to net_context_bind(),
net_context_sendto() and accept callback.
Currently the address length option is not really mandatory
as we can figure out the length from the address family.
But if we are going to support other protocol address families
it might be needed.
Change-Id: I59206465c3259050c469c5b2150221646a9a08d7
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The net_if.h is only meant for new IP stack.
Change-Id: I133d576d7c070dd4a2291544bd0b0401bda942b5
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the received IPv6 router advertisement contains prefix
address options, set the validity of the prefix and expire
them when needed.
Change-Id: I7026d2101bd9eca1f90688c14d5c6aaa66e4af5e
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The net_linkaddr_cmp() will compare two link layer addresses
and return true if they are the same.
Change-Id: I13f5ee9e7976a4118e891aefdb6e7c08f098c0b6
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is the simplest - if not the dumbest - radio protocol we can use
for IEEE 802.15.4 stack. It just transmsits right away (with optional
retry) without taking care of doing any CCA (Clear Channel Assesment).
See IEEE 802.15.4 specification document, part 4.5.4.2
Change-Id: I341ad197aa221bc8f9ec67d0fd523da294a0351b
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It currently supports the basics for the Data MAC service. A radio
protocol is still necessary to send packets.
Change-Id: I78f974ad7440d258583a5c7c6c7160e904eb54f4
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This new radio API will be provided by 802.15.4 device drivers in order
to fit in the new IEEE 802.15.4 stack within native IP stack.
Change-Id: Ib28e8dd3f25e5c802284568b88c2ea6d5cf58f89
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Allocate the right amount of space for L2's context.
Change-Id: Ia2f4f4162334e9e9c26dc95230abdfde5986e052
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
One might need to find out the proper interface from a given struct
device pointer.
Change-Id: Id480d0a2bdf57f0b2d38379727ea1491dedf213e
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The dst_ip6 is a parameter, required for future 802.15.4 L2 layer.
At some point such parameter could be changed to a void pointer,
and a utility function would populate it depending on L2 layer,
if such parameter needs someday to be variable and complex (some
specific struct or else).
Also make sure we use ARG_UNUSED() relevantly, and using proper prefix
to functions.
Change-Id: I43297bb4fb48a8f1bb5075c216342db16261cbb8
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
CONFIG_NET_IPV6_ND enables ND packet processing, and we are thus
interested about the packet recv/sent/drop statistics.
Change-Id: Id281c924193bd2b1d71088bf40d47b1601daad5c
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The send callback in net_context is called after packet has been
successfully sent or dropped. The callback is not called if the
packet is pending and waiting for example IPv6 ND to finish.
Change-Id: I28e77c6333974705a0e31862bb913eedace0b3f9
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The send callback should be called after the packet has been
sent so setup things allowing that.
Change-Id: Icb82f9896667dcb1e400376c0fca6df380509090
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The token is used by net_context.c when sending packet. User
can set the token and get it back when data has been sent.
This can be used to know what specific packet was sent if
there are multiple packets going at the same time.
Change-Id: Iaaf730faaa55a712ae22d903e612e44deb683b8f
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In order to be consistent with naming, this commit renames
ip_protocol enum that is found in net_ip.h to net_ip_protocol.
Change-Id: Ie6caf059279b819794a13494468de789450e2bd8
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This API provides similar kind of functionality as BSD socket
API. This API does not provide BSD socket API.
Change-Id: I537d0ad2a5213f1d1e11fa7891dd4f4d0f3cc4bb
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
These are need in future commits. The sockaddr struct will hold
the IP address and port number among other things.
Change-Id: I0971c39f0f1cb019aa8610977a245e24548c56ee
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Changing the IP address type to const as the functions do not
modify the IP address.
Change-Id: I176d84af5f05843226a954f91b6bb3bba6596863
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Using network interface index instead of net_if pointer can
save 3 bytes of memory. So these utilities help to convert
pointer to index and vice versa.
Change-Id: I8743a06e0935d48798b19526154058be385550af
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When checking the IP address from network interface, return
also the used network interface.
Change-Id: If7b8385193da4cb1b469f697e219cfae3b6477dd
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
IPv4/6 functions follows this scheme: net_if_ipv<4/6>_<name>.
Applying that to net_if_set_gw/net_if_set_netmask which are IPv4
functions.
Change-Id: I2dcbb16ce81cfdffbfbb5cae24ad76ddf2b9919a
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Reducing the amount of #if defined(CONFIG_NET_IPV<4/6>) for a clearer
code and to lower compiler's stress.
Change-Id: Iffbfbda4409c6cbf48a3057ea1b9e43309cd84e7
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Utility verifies given address is based on link layer address
or not.
Change-Id: I2b89e498fa2481051ec9a47ada8b4a5e8e38ad7a
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If the link layer address is short address, create interface ID based on
short address.
Change-Id: I49e150cc20a0bf973880d27f418762f68f2d9139
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
While reusing buffers and passing those parameters might have
already some garbage. So just clear first and create iid.
Change-Id: I5774de157e0c39e7e7b1313a598557c58a4c63b0
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Using macros does not let the compiler verifying about the type we are
providing, which usually give an error easier to understand.
Also, this will let the compiler deciding how to actually optimize
(inline or not) the code.
Change-Id: Iba49590b620ef0a1bd0ed5621453524fcfea747c
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This make sure we will found all relevant headers in the right location.
Change-Id: I37fe978ed2af09d921c48df6986a8df9041ddc3f
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Debug function that will print individual fragments and their sizes.
Change-Id: I84ce144230fb099bb44ed383075564ebf377998f
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The earlier Kconfig entries for IPv6 DAD and ND were confusing.
This commit will clarify this so DAD is activated by
CONFIG_NET_IPV6_DAD and ND is activated by CONFIG_NET_IPV6_ND.
These are settings are enabled by default.
Change-Id: If6245e3425489bc454a0d75113770c4f797a4017
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Provide an utility function that pushes data down in the fragment
chain which means that there would be some free space before the
first fragment.
Change-Id: I491ac4e8cbf633f86f2351cad48d683e829bda63
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Provide a function that checks if there is any free space
in the individual fragment and remove such slack. If there
are fragments that would become empty, then those fragments
are removed from the fragment list and freed to the fragment
pool.
Change-Id: Ieb1c953a1458622c4552c23ef38e330873cd27c3
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Create a handler for catching UDP network traffic. This commit
is only providing infrastructure for UDP management.
Change-Id: Ia6f8de62773a85f7b637b73bfe3c89197cc2abb1
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Added define for minimum IPv6 MTU value (1280 bytes)
Change-Id: Ia81d8b3df079a2bb9bfb0a05e297d94423ba0fc5
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Changed the net_is_ipv6_addr_unspecified() and
net_is_ipv6_addr_solicited_node() to use const IPv6 address
as those function do not change the address.
Change-Id: I1222bf946c371433a8468fa71054b93346e2ae4e
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
User can set the initial value for time-to-live option in Kconfig.
The TTL option is only used in IPv4.
Change-Id: I57677e65a2adee4aa4dc16d1504f848d1218c6c1
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This function will copy desired amount of bytes from one
fragment list to another. Caller can specify amount of
bytes reserved in front of the new fragment list.
Change-Id: Ie3344b285a47c79f116fbcff500d383a99d28bf9
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It is possible to turn of IPv6 neighbor discovery if it is
not used in order to save some memory.
Change-Id: I20159dd452b7bac6962532a91e844c33f3da2dfb
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The ARP packet header contained ethernet header. This is very
confusing so separate the link layer header. Fixed also the
unit tests to run properly.
Change-Id: I8b00bde280ad9f49494766370acb2a8e9cade033
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As the broadcast address is needed in both arp.c and ethernet.c
it is useful to create a utility function for returning that.
Change-Id: I26e75e325f7ee6dcd703a92b3349bd8d388e157e
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Because of commit 7720f6ed1c ("net: buf: Introduce support
for fragmentation") the net_buf should be placed into queue by
calling net_buf_put() when using fragmented data.
Change-Id: I5c3dae92596e9cb0d0ba166bc3de2da9f4fc24b7
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Caller can figure out what is the link layer header size
for a given link layer. There is a callback that can return
a dynamic header size if needed.
Change-Id: I59ea2319eb6cb53a0ba5c6aa9e7eecc4b38c94d3
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We need to know where the L2 protocol source and destination
addresses are so save that information in nbuf.
Change-Id: I08677a0421effb0c997c6a68cfc02ccfa67e7e1e
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add helper to check Ethernet broadcast and multicast address.
Change-Id: Icfe5508a4d3ab2364209a50150a4f8fe239ebc93
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The net_arp_init() was not properly declared if IPv4 was
not active.
Change-Id: I479b93f67c4536bcf9a081c36a6bc82dc5605c4c
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use SYS_LOG instead of directly printing using printk()
Change-Id: I61cff11cf8424f726f24ea00b447f2f4827f2c9c
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The net_core.h accidentally overwrote SYS_LOG_DOMAIN with "net".
This must be done only for network related log domain.
Change-Id: I1050e430e8b649126e527f28c61d191ff34bbf2f
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Setting NET_DEBUG in nbuf.h will confuse the net_core.h
so it should not be done here. The NET_DEBUG can only be
set in .c file.
Change-Id: Ia95996147bf119c4ddf9f45a9fd635f8d2b405cb
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
There is no need to check if the sub-system is initialized
because net_init() is the only place that will call these
functions.
Change-Id: Icd54d2adf2924431cedd7c47124a3410842aeca3
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The network L2 recv handler needs to set the initial value for
IP protocol type (IPv4 or IPv6). Otherwise the recv data check
in net_core.c:process_data() will not work properly if IPv4
is enabled.
Change-Id: I5684cd10e5d79e13a977406729ea68313e689c9b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is the framework that neighbor discovery uses. The ND
is coming in later commits.
Change-Id: Iaaa67c80c0b6b8a3adb9217413b906e0a22d3920
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Various utilities for IPv6 address manipulation in network
interface.
Change-Id: I270f0935288abd77d64c0f64f56b549fb6c4feb9
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The IPv4 comparer was a macro but making it now a inline
function.
Change-Id: I315c52d812996e352e9b392627296ba229530ae0
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Adding a variant for net_linkaddr that can actually store
a link layer address. The normal net_linkaddr struct just
uses pointer to a ll address. The storage version is used
when we have a lladdr cache for neighbors.
Change-Id: I57421047f66090caf09595981c81d386144edce3
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It is then clear what logic to expect once such verdict has been given.
Change-Id: Id64ff00e65ffe2dad45673d1eca4eb76ae3ae1f6
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
As there is a L2 in the middle, there is no need for
net_if to provide such information.
Change-Id: I58a35d4d124cd8a67026f32e71713ef06f43b7c5
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Net core then does not know anything about l2 related logic.
For instance ARP is used in ethernet l2 API and nowhere else.
This will be helpful when adding different technologies altogether.
Currently, only SLIP driver is enabled to use relevant l2 layer.
Change-Id: I03c93326321028d04222733ca4083e3c6b785202
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
net_core.h is the ground brick of the IP stack, and thus should not
include other headers that might include net_core.h also: this would
create circular dependencies.
Change-Id: I70c17b736788528e4e0b4b5b2c478098b049c9b1
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Makes code cleaner so it won't be necessary to access the net_if
internal queue directly.
Change-Id: I119a54e0639843093fa0da6f11e590e8990525d8
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is meant to stay in 80 chars line length limit.
Change-Id: Ib3b3b1cf5e05fec2407e470ae3600ff5a4c6a505
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
__packed is an alias for __attribute__(packed) and is declared in
toochain's headers.
Change-Id: Ib9d136a1a2dd401194988d6573bf7778f07dbfb6
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The network device driver can specify what kind of functionality
it supports. Currently there exists one flag that can be used
in ethernet devices that tells if ARP should be enabled or not.
Change-Id: Ieaaefcfc7cdd65f44190248f507ac3cb512a323e
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Now making sure we are doing the IP address assignment correctly.
Change-Id: I8bf9233b932321a14df99ce49a39581f1343d004
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Call ICMPv4 handler when receiving ICMP v4 packet.
Currently only echo-request msg is handled.
Change-Id: Ib59c65b38f13c484f1842485118dad32fb6a6f36
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Each network interface needs its own stack for TX fiber.
Change-Id: I9647c2b945a3d36bc77c00dad11badb0d5f851e5
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This function is not meant to be used by applications as it
requires that the IP headers etc. are already in place.
Change-Id: I9099671111a029cdf630d131d7af09b147486f64
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Renamed net_recv() to net_recv_data() so that the more generic
name can be used by applications. The net_recv_data() is only
meant to be used when L2 layer feeds data into L3 (IP) layer.
Change-Id: Iba155d51f81e3b99964fa916fe87a05a8bf8766a
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add a macro to get and cast the ICMP protocol header.
Change-Id: Ief3f69d1b3dbe9dd55bc0a032b3506c8e0370563
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Some API functions that check IP addresses were not documented
properly.
Change-Id: I0e7361447db55037888c62ada6b55e3cf5f410f7
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Check if we have received IPv4 packet and call a handler
function to process it.
Change-Id: I9f9e5f0888d2c3b91401c98f4925647ddce09962
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Added more functions to get proper IPv6 address from
a given network interface.
Change-Id: I5aecdb35eb549a0781949134ab4821dcb8ce9e7b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allow user to assign IPv4 addresses to a network interface.
Change-Id: I77be4ed5eb0231eb12b4ad47cb6076c8f4238124
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The caller is able to add and lookup network interface IPv6
addresses.
Change-Id: I7f43e18bd1fa69c7dcd2f6b46ad33043c28b92e9
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
IPv6 utility functions that check if a given IPv6 address
belongs to one of host network interfaces, and whether
the address is a given type.
Change-Id: If251534ae0af41963d45e305e7ba505a940d2fdc
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the source address is multicast, then drop the IPv6 packet.
Change-Id: Ibe733161d67f047469a25a5955c41c335e472945
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Check if we have received IPv6 packet and call a handler
function to process it.
Change-Id: I1226729685ae2a805128b587e2a37e0016d53ecc
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Currently all received packets are dropped as this is just
the initial patch enabling the receive support.
Change-Id: Ib06735f498a80edb8c9f7c5ec6f536a5ac1d362a
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of directly calling printk/printf, the network printing
macros will use syslog macros defined in sys_log.h
Change-Id: I3f12f81557f50b24ca47a43f345162f9ffbd574c
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The send() function is called from IP stack and it is used
when the network packet needs to be send via a specific
network interface.
Change-Id: Id6ce86b1748915fee73b62366dee13fcb7cf11a1
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This will return the network interface that has some specific
link address.
Change-Id: Iaebcf6e769d4f91f3cda6d3a0779324f89603b54
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This macro can be used to check stack usage. It should only
be used when debugging is activated.
Change-Id: I99fe6f9db1f3e955152a91f3a18d031126172cfd
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The NET_IF_INIT() macro used parameter pasting incorrectly.
Change-Id: I40a988ffb06ce135731cd69f18931b7507cd71cc
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Save 12 bytes per IP address if IPv4 is active and IPv6 is not.
Change-Id: Ia01d2feb83e6ba80b2775f9eed3065c956932632
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Network drivers should call this when new data has been
received from network.
Change-Id: Ife78fa0683b8c410c38358300a6a18e9325f0ef8
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Network packets to be sent are placed to correct fifo that
is allocated to certain network interface.
Change-Id: Idd5eded42758c5bed2c18769122c38d9d03dc419
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This will be used by the new network stack to relate a device to actual
network context, and used in the different layers (mac, ip ...).
Change-Id: I30c08fa975314544c36b71636fd9653d562891b3
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is a placeholder that compiles but does nothing else.
Change-Id: I9689fa26eb13bc23d29940938f7b3c11f32b2ff1
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The reversal of the meaning of a value of 0 from k_sem_take vs
nano_sem_take has caused some issue when porting code from the legacy
API to the new API, so put some emphasis on this difference.
- Add a note in the API description.
- Put the call to k_sem_take and the reversal of the return value inside
of nano_sem_take on one line so that grepping on it shows the
reversal.
Change-Id: I2f4ba58dc087176d68b55371fa6e367b72559e70
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
If a particular project needs to add additional data to the
binary image, in most cases the entire linker script needs to
forked into the project space, causing maintenance issues if
the main linker script is changed.
Now we add some Kconfig options to allow a project to specify
some additional linker scripts which get included by the main
one in a few key areas:
1) In the definition to the 'rodata' section, which can allow
additional data to be included in this ROM section.
2) In the definition to the 'datas' section, which allows
additional data to be included in this RAM section.
3) Arbitrary additional sections to be included at the end of
the binary.
For 1 and 2, this is useful to include data generated outside of
the normal C compilation, such as data structures that are created
by special build tools.
3 is useful for including arbitrary binary blobs inside the final
image, such as for peripheral or co-processor firmware.
Change-Id: I5738d3d6da25f5bc96cda8ae806bf1a3fb34bd5d
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Fix typo introduced by commit 6b2443e("console: Fix warnings
related to the use of deprecated APIs")
Change-Id: I6b4db8ba781fecae4413f473001f40ff53c765f0
Signed-off-by: Qiu Peiyang <peiyangx.qiu@intel.com>
With the current interface if multiple counters/timers are present in
the system, it is not possible to select from which one to read the
current value.
This patch fixes the behavior.
Change-Id: Id1ae1f2330e98d078f755c0b81c3b176e90b8389
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Sets the interrupt descriptor table in C domain.
Change-Id: Ia8d2f585ebf60464aeedf2a54363e4683cf257a5
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The pointer value needs to be dereferenced first.
Change-Id: I80d8a9b4837adfc7d0efc69c229c863d05e52a93
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
It is referred to as D/B in the Intel manuals.
Change-Id: If021d875da2d83a256926d9233f1559c8c2ed1db
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
In case of invalid behavior such as error or warnings print caller
function name and line number so it is easier to track back when there
there is a problem.
Change-Id: I3a5f4c7f63e0560fe0cf6f25936b079f127776a8
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
By adding external hook to sys_log we will allow applications
the flexibility of using various output mechanism such SPI,
flash, FS etc.
Jira: ZEP-1172
Change-Id: Ie32a5e52c3946ada0349b75a35cc107bb29385a1
Signed-off-by: Yossi Havusha <yossi.havusha@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Zephyr kernel is unable to compile when CONFIG_RUNTIME_NMI is enabled in
defconfig on ARM's architectures.
This patch addresses the following issues:
* In nmi.c _DefaultHandler() is referencing a function
(_ScbSystemReset()) not defined in Zephyr. This has now been replaced
with sys_arch_reboot.
* nmi.h is included in ASM files and due to the usage of "extern" the
compilation ends with an error. Added the directive _ASMLANGUAGE to
prevent the problem.
Jira: ZEP-1319
Change-Id: I7623ca97523cde04e4c6db40dc332d93ca801928
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Rewrites the timestamping logic to always generate timestamps
via a function pointer that is initialized to sys_cycle_get_32(),
but can be changed to point to a user-supplied function. This
eliminates the need for an if/then/else construct in every place
that a timestamp is generated.
Change-Id: Id11f8c41b193a93cece16565978a525056010f0e
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Prepares the kernel event logger APIs for inclusion in the
API guide. Also corrects a couple of other issues:
* Gets rid of obsolete thread monitor code.
* Renames "timer_func" global variable to "_sys_k_timer_func"
to align it with kernel naming conventions.
Change-Id: I93d403f83ae44ff45dda489c2ead7bfec6ce1fa3
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Prio should be an int, since values are small integers, not a fixed-size
int32_t. It aligns with the prio parameters of the other APIs.
Stack size should be size_t.
Change-Id: Id29751b86c4ad7a7c2a7ffe446c2a96ae83c77bf
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This fixes defect found by coverity: 152027 Pointer to local outside
scope.
Change-Id: I50f196a04363ffa6e6654b71a9a1d89034580413
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Implement the 3 missing HCI commands required to support
Data Length Extensions:
- LE Read Suggested Default Data Length
- LE Write Suggested Default Data Length
- LE Read Maximum Data Length
Note: Only octets are actually used at this time, not time.
Jira: ZEP-1246
Change-Id: Id76d8fedb5ecaf0001c8429cf22f9a3e2c910a44
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Also fixes up Kernel Primer examples to use these macros.
Change-Id: Ib1bc9e3f85ab75f81986bc3930fb287266a886b5
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Return value descriptions using the "@retval" tag now reflect
the fact that they appear on a separate line from the value
they are describing.
Change-Id: I3e3e347d133ad998e7db50a99369d41cbfb9efcc
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The API guide now does a better job of explaining how to use
a workqueue. Also hides information about workqueue internals
and fixes several errors and omissions.
Change-Id: I6492c1c6105c258ce98365ca33059d8f32c1be41
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The API guide now does a better job of explaining how to correctly
write these functions.
Change-Id: Ib1df55eb28fa408f3f786f122353e37505002f07
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
There was no check to see if the head of a list was empty before trying
to fetch the next node in the list. The fix is added to
sys_dlist_peek_next() so that it also return NULL if the node parameter
is NULL, in addition to being the tail of the list.
Since the value is not used until the second iteration of the loop, and
there will be no second iteration if the list is empty, as long as the
CPU does allow reading at address 0, this was not causing any issues.
Our ARC targets did not seem to like that.
Fixes ZEP-1263 and ZEP-1297.
Change-Id: I07ca16592d206d13662226d1249f487ee78c06aa
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
The uart_poll_in() Doxygen comment has a typo ("if empty" should be "is
empty"). Fix it up and make it more clear.
Change-Id: I222051dedc6036e70ce94e8046084d763628ff13
Signed-off-by: Marti Bolivar <marti.f.bolivar@gmail.com>
Most kernel APIs are now ready for inclusion in the API guide.
The APIs largely follow a standard template to provide users
of the API guide with a consistent look-and-feel.
Change-Id: Ib682c31f912e19f5f6d8545d74c5f675b1741058
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Move away from legacy APIs and use unified kenrel instead.
Change-Id: Icae86beec66df1b041405cbe3455913630fc8ad1
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
These should help to make it easier to understand code passing
specific durations to the kernel APIs.
Change-Id: I8682fafc291e8af56fd0289d0cab8c736b88da59
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There was a lot of duplication between architectures for the definition
of threads and the "nanokernel" guts. These have been consolidated.
Now, a common file kernel/unified/include/kernel_structs.h holds the
common definitions. Architectures provide two files to complement it:
kernel_arch_data.h and kernel_arch_func.h. The first one contains at
least the struct _thread_arch and struct _kernel_arch data structures,
as well as the struct _callee_saved and struct _caller_saved register
layouts. The second file contains anything that needs what is provided
by the common stuff in kernel_structs.h. Those two files are only meant
to be included in kernel_structs.h in very specific locations.
The thread data structure has been separated into three major parts:
common struct _thread_base and struct k_thread, and arch-specific struct
_thread_arch. The first and third ones are included in the second.
The struct s_NANO data structure has been split into two: common struct
_kernel and arch-specific struct _kernel_arch. The latter is included in
the former.
Offsets files have also changed: nano_offsets.h has been renamed
kernel_offsets.h and is still included by the arch-specific offsets.c.
Also, since the thread and kernel data structures are now made of
sub-structures, offsets have to be added to make up the full offset.
Some of these additions have been consolidated in shorter symbols,
available from kernel/unified/include/offsets_short.h, which includes an
arch-specific offsets_arch_short.h. Most of the code include
offsets_short.h now instead of offsets.h.
Change-Id: I084645cb7e6db8db69aeaaf162963fe157045d5a
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Use k_current_get() instead of the deprecated sys_thread_self_get()
API.
Change-Id: I4ddb45f299373237690b2f4ca614e7fd3b6c0c36
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Addresses a range of issues affecting the Kernel Primer or
the API Guide generated from doxygen tags.
* Ensures mailbox examples use kernel APIs correctly.
(Fix for ZEP-1262, as well as other errors).
* Ensures memory alignment limitations for memory slabs
are correctly described. (Fix for ZEP-1265.)
* Ensures memory alignment limitations for memory pools
are more clearly described. Also fixes a typo in a
memory pool example.
* Ensures memory alignment limitations for message
queues are more clearly described.
* Fixes references to a number of kernel configuration
options that were omitted or incorrectly formatted.
* Fixes a typo in an example of thread spawning.
Change-Id: I395186f333490b1e0c4223b87c0fe7136548770f
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The API to disable _sys_soc_resume notification is currently
called _sys_soc_disable_wake_event_notification. This is
misleading because it is possible that the ISR from which
_sys_soc_resume is called could be from a different interrupt
with higher priority that happened before interrupts were
enabled. More accurately, it is a notification of exit from
kernel idling after pm operations.
Jira: ZEP-1271
Change-Id: I83747f2cacac1bc17f135d12f4aa4478970fc02d
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
_sys_soc_resume hook is over loaded to handle to different
scenarios. It is primarily called to notify exit of kernel idling
after PM operations. It is also used to notify exit from deep sleep.
This is very confusing and also makes the implementation of the
hook function very difficult because of very different conditions
involved in the 2 different use cases. Further, users may not require
either or both use cases depending of their custom boot flow and
power state handling. To simplify, create a separate hook for the
purpose of deep sleep exit notification. Use the existing one to
only notify kernel idling exit after PM operations.
Jira: ZEP-1256
Change-Id: I96350199a0fd37f16590c8ee5302a94a3d71b8ba
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
This fixes the warnings related to the use of deprecated APIs
converting them to use the unified version.
Change-Id: I76d076de27ecdae4af46abf4baac68e2cc1313c0
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Only net_receive() is using non-special value for net_buf_get_timeout
so this change is included here. Other users are using special values
which are already correctly handling ticks vs ms change.
Change-Id: Ib12d34ac5a546b36fa7b35615f082c82a256bd07
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This fixes warnings related to the use of nano_work and
nano_delayed_work in L2CAP layer.
Note that k_delayed_work takes a timeout in miliseconds rather than in
ticks thus the timeouts values changes.
Change-Id: I1e3bd7857248865e34a313dd42862af5f4e3805b
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This patch introduces the Connect API which initiates session
connection first. If session is already there with the peer
then it has to reuse it and initiate DLC (which will be done
in the subsequent patch) since there can be only one session
per device.
< ACL Data TX: Handle 256 flags 0x00 dlen 8
Channel: 64 len 4 [PSM 3 mode 0] {chan 0}
RFCOMM: Set Async Balance Mode (SABM) (0x2f)
Address: 0x03 cr 1 dlci 0x00
Control: 0x3f poll/final 1
Length: 0
FCS: 0x1c
> ACL Data RX: Handle 256 flags 0x02 dlen 8
Channel: 64 len 4 [PSM 3 mode 0] {chan 0}
RFCOMM: Unnumbered Ack (UA) (0x63)
Address: 0x03 cr 1 dlci 0x00
Control: 0x73 poll/final 1
Length: 0
FCS: 0xd7
Change-Id: I9828e0f3b3ea43bb17df95f0536e15df86f1b4be
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Add Low Power States support to the power shim layer
and show the usage in the quark_se sample.
States are defined as follow:
- SYS_POWER_STATE_CPU_LPS: SS2 with LPSS enabled
- SYS_POWER_STATE_CPU_LPS_1: SS2 with LPSS disabled
- SYS_POWER_STATE_CPU_LPS_2: SS1 with LPSS disabled
Jira: ZEP-994
Change-Id: Ie4b93f6e539cb53fc035be00280b66b2cb0d9fea
Signed-off-by: Julien Delayen <julien.delayen@intel.com>
There was no check to see if the current context was running an ISR when
taking a decision whether to do a context switch or not.
Change-Id: Ib9c426de8c0893b3d9383290bb59f6e0e41e9f52
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
Useful for finding out if the current thread is protected against
preemption when using non-preemption to protect data structures.
Change-Id: Ib545a3609af3646ba49eeeb5a2c50dc51af010d4
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Oversight. These functions are used extensively in the kernel guts, but
are also supposed to be an API.
k_sched_lock used to be implemented as a static inline. However, until
the header files are cleaned-up, and everything, including applications
get access to the kernel internal data structures, it must be
implemented as a function. To reduce the cost to the internals of the
kernel, the new internal _sched_lock() contains the same implemetation,
but is inlined.
Change-Id: If2f61d7714f87d81ddbeed69fedd111b8ce01376
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The header uses struct device * plus stdint types.
Change-Id: Id4b817682afa4cc229f98a289adf6646d26d18bc
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Does a general cleanup including:
* adding descriptions for APIs that are missing them
* adding information that would be helpful to users
and removing information that wouldn't be helpful
* correcting errors
* aligning the terminology with the terminology used
in the Kernel Primer document
* standardizing the way information is presented
Change-Id: I536644a7dc60b62100e379a199a645344430beb7
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Updates x86 floating point support to reflect changes that have
been made in recent months.
* Many, many, many cosmetic changes (mostly revisions to comments).
* Elimination of unnecessary function aliases that were needed
to support the task and fiber versions of certain APIs.
* Elimination of run-time code to enable a thread's "FP regs"
option bit if the "SSE regs" option bit was set. The kernel
now recognizes that the thread is using the FPU as long as
either option bit is set. (If the thread has both option bits
enabled this is the same as if only the "SSE regs" bit is set.)
Change-Id: Ic12abc54b6fa78921749b546d8debf23e7ad232d
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Many APIs needed to be converted into inline functions first.
Now all APIs here are deprecated, or #defined to something that is
deprecated.
Change-Id: Ibad55adec113eb8913ebe07134a2e4935616bc1d
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
PRIMARY, SECONDARY, NANOKERNEL, MICROKERNEL init levels are now
deprecated.
New init levels introduced: PRE_KERNEL_1, PRE_KERNEL_2, POST_KERNEL
to replace them.
Most existing code has instances of PRIMARY replaced with PRE_KERNEL_1,
SECONDARY with POST_KERNEL as SECONDARY has had a longstanding bug
where the documentation specified SECONDARY ran before the kernel started
up, but actually ran afterwards.
Change-Id: I771bc634e9caf7f17dbf214a270bc9967eed7d32
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
'private' is a C++ reserved word and will lead to compilation errors:
C++ ble.o
In file included from ble.cpp:7:0:
include/bluetooth/bluetooth.h:284:10: error: expected unqualified-id before 'private'
uint8_t private[4];
Change-Id: I36aef5a84af4fc66e1c810bd0c56e5ab5f803294
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
USB class drivers may need to offload some work from
upcall interrupt context to a background fiber. This
requires some way to defer taking more data from host
till the offloaded work completes. Two APIs are added to
achieve this.
Further USB class drivers sometimes need to set STALL condition
on end-points to signal errors to host.These too are
added.
Change-Id: Ic973522c3394e23d7f9c4c67affc0cd050afc20f
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
This patch removes "FAT" from files names, config names and
symbol names so as to avoid confusion, when other modules use
them in a more generic way.
Also flash_disk_access.c and ram_disk_access.c now exports generic
disk_access symbols as defined in include/disk_access.h rather
than FAT specific ones in fs/fat_diskio.h. Thus modules like
USB which need to use disk_access interface is not dependent
on symbols from ELMChan FAT module. Also fat_diskio.h
is removed.
Further the shim between ELM chan and Zephyr is modified as
per these changes.
Change-Id: Ifd80f14a629e467ee9c7a9aaff8a4896eed11982
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Adds a disk interface which is independent
of filesystem specific symbols or headers.
Change-Id: I8c72fd3a9d12c5d9623721513fc66edc7bce0a5d
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Define the priority reserved for the idle thread rather than use
K_LOWEST_THREAD_PRIO.
Change-Id: I514296d774047fa1348249da8ee90a68b6aace17
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
C++ support moved from nanokernel.h to kernel.h.
Change-Id: I5e1631941e26f4ab3f311b680267b743bab15e40
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
ztest code redefines this as C function, which causes problems when
it appears in the legacy.h header as a static inline function.
Change-Id: I3ed9fbece3a304f706857a16bdca8dfb11a7802c
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Symbols now use the K_ prefix which is now standard for the
unified kernel. Legacy support for these symbols is retained
to allow existing applications to build successfully.
Change-Id: I3ff12c96f729b535eecc940502892cbaa52526b6
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Making a reference to the common work queue code should not necessarily
drag in the system workqueue, since it is possible to use a workqueue
that is not the system workqueue. This is done by moving the system
workqueue into its own code module.
Moving the system workqueue to its own code module allows removing the
NANO_WORKQUEUE and SYSTEM_WORKQUEUE kconfig options, and compiling the
common workqueue code and system workqueue all the time. They are only
linked in the final image if a reference to them exist, same as the
other kernel modules.
Change-Id: I6f48d2542bda24f4702e7c2e317818dd082b3c11
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This replaces initiator flag of session and dlc to enum which has
two values INITIATOR and ACCEPTOR.
Also this defines macros for CRs in header. Basically there are
three types fo CRs. Frame header CR has different meaning for
UIH and non UIH packets. Also this renames the existing msg hdr
CR to make it consistent.
These changes are basically done to make it more readable
Change-Id: Ic15e93465b0afbd19d8805f27d7a43f34ef38689
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Enhance C++ support by adding placement versions of the new and
delete operators. Similar to the regular new and delete which
are already included.
Change-Id: If3f48fbf2f05164a8bea3f66ae84e3e37fb4f528
Signed-off-by: Sakari Poussa <sakari.poussa@intel.com>
It is now possible to specify the expiry and stop functions
of a statically-defined timer, just as can be done for a
dynamically-defined timer.
[Part of fix to ZEP-1186]
Change-Id: Ibb9096f3fdafdc6c904184587f86ecd52accdd66
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
QMSI 1.3 natively supports restoring the SoC and peripherals
after sleep.
The Zephyr Power Management shim layer is updated
in order to support QMSI functions.
The following functions have been added:
void _sys_soc_set_power_state(enum power_state);
void _sys_soc_power_state_post_ops(void);
In order to fully support deep sleep, the function
_sys_soc_set_power_state now support saving and
restoring CPU context and returns to the application.
_sys_soc_set_power_state function also abstracts
QMSI cpu states and enable the application to choose
between C1/C2 or C2LP states.
The QMSI power states are mapped as follows:
SYS_SOC_POWER_STATE_CPU_LPS -> power_cpu_c2lp
SYS_SOC_POWER_STATE_CPU_LPS_1 -> power_cpu_c2
SYS_SOC_POWER_STATE_CPU_LPS_2 -> power_cpu_c1
SYS_SOC_POWER_STATE_DEEP_SLEEP -> power_soc_deep_sleep
SYS_SOC_POWER_STATE_DEEP_SLEEP_1 -> power_soc_sleep
The following functions have been removed:
void _sys_soc_set_power_policy(uint32_t pm_policy);
int _sys_soc_get_power_policy(void);
FUNC_NORETURN void _sys_soc_put_deep_sleep(void);
void _sys_soc_put_low_power_state(void);
void _sys_soc_deep_sleep_post_ops(void);
Those changes are propagated to the samples.
All calls to QMSI are removed.
Jira: ZEP-1045, ZEP-993, ZEP-1047
Change-Id: I26822727985b63be0a310cc3590a3e71b8e72c8c
Signed-off-by: Julien Delayen <julien.delayen@intel.com>
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
For AON peripherals on Quark SE C1000, an API is needed
to retrieve the interrupt status after wake up.
This enables the application to know the wake source before
enabling again the interrupts.
Add this API to the rtc as this is a wake event
on Quark SE C1000.
Jira: ZEP-1188
Change-Id: Id850ce405eb3f4857be720201e462ea8e24a334f
Signed-off-by: Julien Delayen <julien.delayen@intel.com>
For AON peripherals on Quark SE C1000, an API is needed
to retrieve the interrupt status after wake up.
This enables the application to know the wake source before
enabling again the interrupts.
Add this API to the gpio as this is a wake event
on Quark SE C1000.
Jira: ZEP-1188
Change-Id: Icc4aa6617bf18402b7e5dc3aab779ec2964e1c5b
Signed-off-by: Julien Delayen <julien.delayen@intel.com>
For AON peripherals on Quark SE C1000, an API is needed
to retrieve the interrupt status after wake up.
This enables the application to know the wake source before
enabling again the interrupts.
Add this API to the aio comparator as this is a wake event
on Quark SE C1000.
Jira: ZEP-1188
Change-Id: Ifa08353270910a363c15a4203770ff3e7857572b
Signed-off-by: Julien Delayen <julien.delayen@intel.com>
For AON peripherals on Quark SE C1000, an API is needed
to retrieve the interrupt status after wake up.
This enables the application to know the wake source before
enabling again the interrupts.
Add this API to the periodic timer as this is a wake event
on Quark SE C1000.
Jira: ZEP-1188
Change-Id: I79976230bccb1f970b6856d28bf7428175167828
Signed-off-by: Julien Delayen <julien.delayen@intel.com>
Defines an object tracing list for each kernel object type
that supports object tracing, and ensures that both statically
and dynamically defined objects are added to the appropriate list.
Ensure that each static kernel object is grouped together with
the other static objects of the same type. Revise the initialization
function for each kernel type (or create it, if needed) so that
each static object is added to the object tracing list for its
associated type.
Note 1: Threads are handled a bit differently than other kernel
object types. A statically-defined thread is added to the thread
list when the thread is started, not when the kernel initializes.
Also, a thread is removed from the thread list when the thread
terminates or aborts, unlike other types of kernel objects which
are never removed from an object tracing list. (Such support would
require the creation of APIs to "uninitialize" the kernel object.)
Note 2: The list head variables for all kernel object types
are now explicitly defined. However, the list head variable for
the ring buffer type continues to be implicitly defined for the
time being, since it isn't considered to be an core kernel object
type.
Change-Id: Ie24d41023e05b3598dc6b344e6871a9692bba02d
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Enhance the linker script so that all statically-defined kernel
objects of a given type are co-located.
Note 1: This capability is needed so that static kernel objects
can be added to the associated object tracing list. (Some kernel
object types are already co-located to permit the kernel to do
other initialzation on statically-defined objects.)
Note 2: A follow-up commit is needed to ensure statically-
defined kernel objects are placed in the sections referenced
in the linker script.
Note 3: The legacy script info remains for now to allow
applications using the microkernel or nanokernel to continue
to build.
Change-Id: I40d831f9e183fb121c950e30fa8298b6d529375b
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Several legacy API macros had the format:
#define some_legacy_api(<parameters>) other_api(<same parameters>)
This prevents passing 'legacy_api()' as a function pointer. Remove the
parenthesis where possible and instead use the format:
#define some_legacy_api other_api
This allows passing 'legacy_api' as a function pointer by having the
preprocessor resolve it to 'new_api' directly.
Change-Id: Ib680a15a22097727b1dade4b7b4785267c004751
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
Ability to use Zephyr shell by multiple modules simultaneously, each
module for its own usage.
Old shell implementation enabled the user to call only one module
commands, not all of the modules simultaneously.
Change-Id: I0ef8fa2fd190b7490c44fe91d1016363258302c9
Signed-off-by: Yael Avramovich <yael.avramovich@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Allows event objects to pend signals in a cumulative way using
the semaphore in a non-binary way.
Jira: ZEP-928
Change-Id: I3ce8a075ef89309118596ec5781c15d4f3289d34
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Even though this is level 0, NONE as a symbolic description is more in
line with the other level names.
Change-Id: Ic9d7c38b928d8744d47e759fae804bbbc08c89bf
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
So far bt_security_t has completely missed out on security level 0,
i.e. its actual values have been one lower than in the core
specification.
To properly introduce for the new level (which is only applicable for
BR/EDR) add proper tracking for each channel and server, and make the
channels inherit their required level from the respective server.
Change-Id: I9a2384d883017125c2c117880aa6e0ade30520e4
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This uses net_buf_simple_{save/restore} so the same buffer can be reused
if the buffer needs to be resent, also since the responses don't need to
be saved a pool with 1 element is enough while it keeps the code safe
from deadlocking when both request and responses use the same pool.
Change-Id: Ibaa8e7ef39f4b466d5cd4d55874bd609f0a1d67c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This header file is not intended for applications, rather than for
drivers, so move it to the appropriate place.
Change-Id: I7ff8158418e7e839b538c6cccbb32f3af43c12c6
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There are a number of data sections that are repeated across
all the linker scripts for various architecture. In practice these
don't always get updated and we have had problems with bit-rot.
Consolidate these to make maintenance easier.
x86 linker scripts now follow the same naming convention and we
get rid of a linker-epilog.h that wasn't necessary and whose purpose
has been lost to the mists of time. If applications want to define their
own sections they should be allowed to. Linker scripts for x86 do not
end with .h any more, they are not C header files even though we use
C's preprocessor.
Issue: ZEP-688
Change-Id: I893eb4619969695c1f980efd7c2ec9fa5dad136d
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Re-design the pwm API interfaces. A RFC was sent and discussed
recently on the re-design of PWM APIs.
APIs like pwm_pin_set_values, pwm_pin_set_period, pwm_pin
_set_duty_cycle will be deprecated and replaced by the new
APIs pwm_pin_set_cycles and pwm_pin_set_usec.
A new API pwm_get_cycles_per_sec will be added to get the
clock rate for pwm pins.
The API pwm_pin_set_phase will be deprecated(it always sets
the phase to zero).
The API pwm_pin_configure will be deprecated since it is not
doing anything for most of the platforms or it can be moved
to device init function for the other platforms.
All the pwm_all_xxx APIs will be deprecated. If necessary,
user or an app can set the pins individually.
Jira: ZEP-745
Change-Id: Ie7095df2a67cff08873b59794812ac64ee00c1c2
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
The namespace allocated for the filesystem API is fs_* and FS_*. That
means all symbols and defines should adhere to it.
Jira: ZEP-1155
Change-Id: I422310448b7c7c347f621aea6d7b1d97ef25c94d
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Based on the STM32F10x driver. Removing old code as we need to use the
bus number when dealing with 4 possible peripherals.
Change-Id: Id0263aa008e9b039ff9a00339e5622e289ffdf99
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Event is such an overloaded and generic term (event logger, *kernel*
event logger, "protocol" events in other subsystems, etc.), that it is
confusing for the name an object. Events are kinda like signals, but not
exactly, so we chose not to name them 'signals' to prevent further
confusion. "Alerts" felt like a good fit, since they are used to "alert"
an application that something of significance should be addressed and
because an "alert handler" can be proactively registered with an alert.
Change-Id: Ibfeb5eaf0e6e62702ac3fec281d17f8a63145fa1
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This better aligns with the actual functionality of the object.
Change-Id: I70abf54f994e92abd7367251089ea4f735d273fe
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The header was always supposed to be Apache 2 and not 3-Clause BSD.
Change-Id: I82f319edfc7a76323b2b409fadc90e270d7f1cad
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The bt_driver API was created when Zephyr only had a Bluetooth host
stack, but no controller-side functionality. The only "driver" that
was needed for the host was the HCI driver, and hence "HCI" was
omitted from the name.
With support both for host and controller Zephyr will be getting more
Bluetooth driver types, in particular radio drivers. To prepare for
this, move all HCI drivers to drivers/bluetooth/hci/ and rename the
bt_driver API bt_hci_driver.
Change-Id: I82829da80aa61f26c2bb2005380f1e88d069ac7d
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Remove "EDR" and "HS" postfixes from the version names, since
those are only relevant from a marketing point of view, and
not at all for HCI compatibility purposes.
Change-Id: Id8b4b010ed8b80dd63898c4baf85062e51b2635a
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Report the HCI version supported by the Controller as 4.2,
since it was set as 0 (1.0b) and this confused certain Host
implementations, such as BlueZ.
Change-Id: I809721ee9c2b55e77e6a3ca63688c802a9ffa0ba
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Previously the macro provided no way for an application to
easily reference a statically-defined thread.
Change-Id: I552e5f4ab4e6e8a793bb3a6a2b0c2636b900023a
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The _THREAD_INITIALIZER() macro is now used in all cases where
a static thread is defined. It accepts the arguments used by
k_thread_spawn(), as well as the legacy abort function and task
group arguments.
The two remaining legacy macros required to support static threads
now appear in legacy.h.
Change-Id: I7ba24c285beee63d63c8da0e0fa120f35c0d9526
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Adds the field, in preparation for making use of it in the future.
Also re-orders the existing fields of the _static_thread_data
structure so they appear in the same order as the arguments
to k_thread_spawn(). This makes it easier to ensure all of the
arguments and fields are handled in a consistent manner.
Change-Id: I401687ecfdacd52c05ab95af7f12d8dc658ed419
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
size_t should be printed with %zu. This also fix build error on
unified kernel due to ZEP-1133.
Change-Id: I9c5fc7f7de365e47bd0973913b94baa80f7907e3
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
For some reason, the legacy nanokernel semaphore "give" APIs were
implemented as macros that took a parameter instead of doing a straight
mapping to the unified kernel functions that provide the equivalent
functionalities. This prevented passing the nanokernel semaphore APIs as
function pointers to other APIs.
One such subsystem that does this is the kernel event logger.
Change-Id: Ib302167c9907d2c8ac1f9beef1eef093b48abf61
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
All M7 features common to M3/M4 are working. New features like Tightly
Coupled Memory (TCM) are not yet supported.
Change-Id: I5f7b292e70843aec415728f24c973bb003014f4b
Jira: ZEP-977
Signed-off-by: Piotr Mienkowski <Piotr.Mienkowski@schmid-telecom.ch>
Support Cortex-M0, M3/M4, M7 is easier when the memory map is defined in
terms of absolute addresses.
Based work from: Piotr Mienkowski <Piotr.Mienkowski@schmid-telecom.ch>
Change-Id: I860860c369e8bed6c6c23661a15ce464d87ff221
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
With this patch we introduce unified kernel support for NIOS II.
Not all test cases have been ported, but the following command
currently succeeds with 43/43 passing test cases:
$ sanitycheck --arch=nios2 -xKERNEL_TYPE=unified \
--tag=unified_capable
Issue: ZEP-934
Change-Id: Id8effa0369a6a22c4d0a789fa2a8e108af0e0786
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The new kernel doesn't support the thread abort handler concept,
so only the legacy API for this capability is needed.
Change-Id: Ie809092e73b784504c3d298911d216bed8dd8993
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This simplify buffer handling so that no extra references are needed.
Change-Id: Id99a0a75b39ca8db2216668f76c5a672713075ae
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This refactor is in preparation for making driver API structures
const.
The console driver provides a mechanism to install an input and an
output hook function. These are primarily used by the onboard
gdb-server. The output hook is entirely implemented within the
console driver.
The input hook is partially implemented in the top of the uart driver
and within the console driver. The hook function itself is installed
in the uart API structure, but is invoked only by the console driver.
Installing the hook function directly into the uart API structure
prevents the API structure being const. There are two approaches to
fixing this:
1) Implement setting of the input hook in the same way as
uart_irq_callback_set().
2) Move the input hook entirely to the console driver.
We implement the latter. This approach has two benefits, first it
removes the need for every uart driver to implement the behaviour and
second, the current placement of the callback function in the uart API
seems odd given that the callback is only invoked by the console
driver, never by a uart driver.
Change-Id: I258b312d3055df1c2bdeb896bd4f4f39c40838f7
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Fleshes out the prototype heap memory pool support
to make it fully operational. Noteworthy changes are
listed below:
Tweaks arguments to k_malloc() and k_free() to be more like
malloc() and free(). Similarly, modifies k_free() to take
no action when passed a NULL pointer.
Now stores the complete block descriptor at the start
of any block allocated from the heap memory pool. This
increases memory overhead by 4 bytes per block, but
streamlines the allocation and freeing algorithms. It also
ensures that the routines will work if the block descriptor
internals are changed in the future.
Now allows the heap memory pool to be defined using the
HEAP_MEM_POOL_SIZE configuration option. This will be the
official configuration approach in the unified kernel.
Also allows the heap memory pool to be defined using the
(undocumented) HEAP_SIZE entry in the MDEF. This is provided
for legacy reasons only.
Co-locates memory pool initialization code to keep the line
that causes memory pool initialization to be done during booting
right next to the routine that does the initialization.
Change-Id: Ifea9d88142fb434d4bea38bb1fcc4856a3853d8d
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Reworks k_work_q_start() so that it accepts its 3 configuration
settings directly, rather than forcing the caller to pass in a
configuration data structure.
Change-Id: Ic0bd1b94f1a1c8e0f8a84b3bd3677d59d0708734
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Aligns the APIs for defining a thread at compile time and for
spawning a thread at run time.
Change-Id: Ic5df450cbe4d0eb562fb4a608f1ac5a8a7cb4b96
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The "__noinit" was accidentally lost during initial prototyping
of the unified kernel. This just restores it ...
Change-Id: Id13e0e9a323c1bcd49c28a5d8da73943b0177890
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Macros SYS_KERNEL_VER_MAJOR(), SYS_KERNEL_VER_MINOR(),
SYS_KERNEL_VER_PATCHLEVEL() capped their return values to 0-15 range,
even though documentation says "Each of these elements must therefore be
in the range 0 to 255, inclusive". Fix to corresponds to the docs. This
issue especially affected SYS_KERNEL_VER_PATCHLEVEL(), which could be
set to a high value to represent WIP code in-between releases.
Change-Id: I0b72fb68f3f0f8d3d3b321a5ba2c48671879dfbc
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
ARC does not align data structures by 4 bytes by default.
Add necessary linker sections.
Change-Id: I3bf7aa38b9bc8cba56f824469040c027968fa564
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Not disabling SysTick as it is optional by the spec.
SVC not used as there is no priority-based interrupt masking (only
PendSV is used).
Largely based on a previous work done by Euan Mutch <euan@abelon.com>.
Jira: ZEP-783
Change-Id: I38e29bfcf0624c1aea5f9fd7a74230faa1b59e8b
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
PM control function is used only by the PM subsystem. Update
documentations to make it clear and name the relevant structures and
functions with _pm_ in the name.
Jira: ZEP-1044
Change-Id: I29e5b7690db34a228ed30a24a2e912e1360a0090
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
This is used by a test case, and it's better to just put this
here instead of forking the linker scripts.
Change-Id: Ifbb90b73bb26118ae2422cc6feccb3db58a26f2c
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This mechanism was intended to reserve space during the first pass for
certain data structures created by gen_idt, but this is unnecessary.
The only memory addresses that must be fixed between the two passes are the
locations of the interrupt stubs, which are in the .text section much
earlier than the generated data structures; they do not shift.
Change-Id: I3aab00e171e6a9ff439a7af8d69769e4c29337a7
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Ring buffer section now resides under "other" topic, since the
ring buffer type is a general purpose type (like the singly and
doubly linked list types), rather than a kernel-specific type.
Enhances ring buffer section to improve content and improve
consistency with the form used elsewhere in the Kernel Primer.
Also corrects a minor error in the ring buffer API documentation.
Change-Id: Icaa8661524f80e31f173adee859844cadb38967f
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Ensures that all APIs which accept a timeout value wait for at least
the specified amount of time, and do not time out prematurely.
* The kernel now waits for the next system clock tick to occur before
the timeout interval is considered to have started. (That is, the only
way to ensure a delay of N tick intervals is to wait for N+1 ticks
to occur.)
* Gets rid of ticks -> milliseconds -> ticks conversion in task_sleep()
and fiber_sleep() legacy APIs, since this introduces rounding that
-- coupled with the previous change -- can alter the number of ticks
being requested during the sleep operation.
* Corrects work queue API that was incorrectly shown to use a delay
measured in ticks, rather than milliseconds.
Change-Id: I8b04467237b24fb0364c8f344d872457418c18da
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
For XIP images, in order to avoid the situation when
__data_rom_start is 32-bit aligned, but the actual data is placed
after rodata section, which may not end exactly at 32-bit border,
pad rodata section, so __data_rom_start points at data and it is
32-bit aligned.
On non-XIP images this may enlarge image size up to 3 bytes.
This is generally not an issue, since modern ROM and FLASH
memory is usually 4k aligned.
Change-Id: I3d37fccbc610615585d776144ab9e281368258d6
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
This adds convenient helper so that users don't need to touch nano_sem
internals. Wrapper for unified kernel is added too.
Change-Id: Ic0af8b1ea302939d5239648327cb3cc125c48148
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This change shortens the Service Class macro name from
BT_SDP_*_SVCLASS_ID to BT_SDP_*_SVCLASS
Change-Id: I1150baae24428c6b76f005d11003291016e0a03e
Signed-off-by: Kaustav Dey Biswas <kaustav.d.biswas@intel.com>
This change adds SPP as a sample SDP service during RFCOMM
server registration. The SPP channel is now used as the
fixed channel for RFCOMM register command.
Change-Id: I3b5ad3995725adca55db1497d4a35099f6311f3b
Signed-off-by: Kaustav Dey Biswas <kaustav.d.biswas@intel.com>
This change adds support for registering new service records.
Change-Id: I0ff2264d08787fe5f8edf6300259961c3ca52fbb
Signed-off-by: Kaustav Dey Biswas <kaustav.d.biswas@intel.com>
Add Bluetooth protocol UUIDs to be used in SDP service records
Change-Id: I184cc114ff3fa172d9caa23d0b243a3191bb9773
Signed-off-by: Kaustav Dey Biswas <kaustav.d.biswas@intel.com>
This way the application can reuse the same callback for multiple CCC
since it can track what CCC is affect by checking the attribute pointer.
Change-Id: I608da643aea07de26b65d67e6db3268d717d0f53
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Provides users with a more compact and intuitive API for kernel
timers.
Provides legacy support for microkernel timers and nanokernel
timers by building on the new kernel timer infrastructure.
Each timer type requires only a small amount of additional
wrapper code, as well as the addition of a single pointer
field to the underlying timer structure, all of which will be
easily removed when support for the legacy APIs is discontinued.
Change-Id: I282dfaf1ed08681703baabf21e4dbc3516ee7463
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
- Reorders parameters where necessary
- Adds alignment parameter to K_MSGQ_DEFINE() for buffer alignment
- Renames parameters where necessary so they are more intuitive
Change-Id: I0b53105c04109127897bf4790e6908082f82da4e
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Finally, after numerous, preparation patches... Make a device drivers
config_info structure 'const'.
Change-Id: Idc4682705da18a18b694d3fb21ba6006f96ac87b
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
- Renames to K_MEM_POOL_DEFINE() for consistency
- Adds alignment parameter to align the pool buffer.
Jira: ZEP-926
Change-Id: I6cf0a1ce45c3a0fc5f0675047d8928659df1e75e
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
K_THREAD_DEFINE() can no longer specify a thread group. However, it now
accepts a 'delay' parameter just as k_thread_spawn() does.
To create a statically defined thread that may belong to one or more thread
groups the new internal _MDEF_THREAD_DEFINE() macro is used. It is only used
for legacy purposes.
Threads can not both have a delayed start AND belong to a thread group.
Jira: ZEP-916
Change-Id: Ia6e59ddcb4fc68f1f60f9c6b0f4f227f161ad1bb
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The keys BT_STORAGE_SLAVE_LTK, BT_STORAGE_LTK, BT_STORAGE_IRK allow to store
the distributed bonding keys for ble legacy pairing.
Change-Id: Iaee8b78456e9865a53a2f1228b6afa7ff44bc4db
Signed-off-by: Roger Lendenmann <roger.lendenmann@intel.com>
Added a OpCode definition that can be used to change the Page
timeout value.
Change-Id: I6ec06f6114f75665b161206ef3ebabbab193b04f
Signed-off-by: Itankar, Piyush T <piyush.t.itankar@intel.com>
The list of remote devices for which we have information stored can be
retrieved using this key.
Change-Id: I1476c40177b631d6b2b4049623052245b25ed1b3
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The bt_storage_clear() function doesn't modify the data behind the
addr parameter, so the pointer should be decared const.
Change-Id: Icce676f9df80bac26ba4877bb63752559a43339f
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
__ASSERT() would trigger if the two buffers were on a common boundary.
Change-Id: Ie9af12abc407dd43615f543b43397493d981057e
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Tweak mailbox API parameters so that not only are their descriptions
correct, but their names match across header file and C file.
Change-Id: Ieeb3a40fb7c535a5eac2e06533d01d13aaf69181
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The routine k_pipe_block_put() is only available if the system has
been configured for asynchronous pipe sends.
Change-Id: I642fecc961ca4ef4ac8839a01ffd4125c30794b8
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
- Reorders parameters where necessary
- Adds alignment parameter to K_PIPE_DEFINE()
- Renames parameters where necessary so they are sync'd
between header and source files
Change-Id: I4f2367abc28aff646cc90beb9f08bb266e143b0c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Two functions are proposed:
- sys_memcpy_swap(): will memcpy and swap the 2 given buffers
- sys_mem_swap(): will swap the buffer in place.
The idea is to propose 2 different functions optimized for 2 different
usage.
Change-Id: I1c23907c1f287b72d9be077ccf3aadbb8d379e71
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This reverts commit 627feb92d4.
This patch breaks TCP/IPv4 support in echo_server.
Change-Id: Ia1e2cf8dfa94f845d3a8282c83bba40b36ee782c
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Gets rid of official support for dynamic timer allocation
in the unified kernel, since users can easily define and
initialize timers at any time. Legacy support for dynamic
timers is maintained for backwards compatibility reasons
for the time being ...
Change-Id: I12b3e25914fe11e3886065bee4e96fb96f59b299
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Folds this API into k_stack_init() to provide a single API
that requires the caller to pass in the stack buffer, just
as is done for other kernel objects initialization APIs
involving the use of a buffer.
Change-Id: Icad5fd6e5387d634738d1574f8dfbc5421cd642d
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
* Gets rid of k_current_priority_get(). Users can just call
k_thread_priority_get(k_current_get()) instead.
* Declares k_thread_priority_get() in kernel.h, where it
really belongs.
* Removes duplicate declaration of k_thread_priority_set().
Change-Id: I616ae6f2e06c95ecba3b92324186b3fa29162fd1
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Gets rid of unified kernel APIs that will never be implemented.
(i.e. They were proposed, but are no longer considered desirable.)
Change-Id: I63ff0d2cdef355d21595f2a778ef5d5b18796149
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Allows unified kernel to support legacy microkernel applications
that use private tasks.
Also renames the unified kernel macro for defining a thread
to be consistent with the naming used for defining other kernel
objects.
Change-Id: I667d87056138c45c291dd848344e4051bf9fd1ff
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
These can be re-introduced if a kernel workload measuring
capability is added to the unified kernel.
Change-Id: Id7ad9c1239667511ffcecf571126301c9b278929
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Adds type cast to convert task group argument to a numeric value,
in case the caller passes in "NULL" (as Kernel Primer says to do
when the task isn't a member of any task group).
Change-Id: I549f86aba0f340c2fb256c4fceeaf786fb8eb5fc
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Timers are based off timeouts now, which can only be enabled when the
system clock is enabled. So the three are really just one setting now.
Keep the NANO_TIMERS and NANO_TIMEOUTS around for now until all
middleware that rely on them is updated. They are always enabled when
SYS_CLOCK_EXISTS is enabled.
Change-Id: Iaef1302ef9ad8fc5640542ab6d7304d67aafcfdc
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Rename remaining functions to fit with kernel naming convention for
internal interfaces. Use struct k_thread instead of struct tcs.
Change-Id: I28cd7f6f4d7ddaeb825c8d2999242d8d2dd93f31
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Can speed up some kernel code paths that know a list is not empty.
Change-Id: Ic1261b2e9bf242b7fe49e8a36aeacf9e03f3026b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Packets sent out through net_tx_fiber go through psock_send() where
they wait for data_is_sent_and_acked() to process them.
data_is_sent_and_acked() looks at the underlying connection's
MSS (maximum segment size) before putting them on the wire through
uip_send(). The trouble is that that linkage between the outgoing
buffer and the connection hasn't been established at the point
data_is_sent_and_acked() is called--this normally happens through
a call to uip_set_conn().
So data_is_sent_and_acked() fetches an invalid connection handle
and makes its choice using an arbitrary MSS. In my particular case,
this arbitrary value was 0, and so packets weren't being sent out.
Change-Id: I42e8ae104ac20f8df8780c8aee6964ed37113ba0
Signed-off-by: Rohit Grover <rohit.grover@arm.com>
ARC interrupts can be either level or pulse.
Level interrupts remain asserted until the interrupt service routine
clears the interrupt at the peripheral. This is the default and most
common case.
Pulse interrupts have an extra flip-flop that converts a pulse to a
level. The ARC auto-clears this level as the interrupt service routine
is entered. As such, an interrupt handler for a pulse interrupt need
not clear the interrupt.
It is the rare device that uses pulse interrupts.
Nothing currently calls this inline function so ARC interrupts are
LEVEL by default.
(see ZEP-83)
Change-Id: I09ef86aae1926c1327e82ff99c2f8aa7eabde684
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
API documenation for Nanokernel FIFO make no mention that the data items
added to the FIFO must include and reserve the first 32 bits for use as
a pointer to the next item in the FIFO. This adds that note, as described
in the overview FIFO documentation.
Change-Id: I8cf0072d97dbb373a73d534f39b72831c726f4ef
Jira: ZEP-747
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Simplified some documentation, removing inconsistencies and making
it easier to understand by separating PM infrastructure areas and
soc specific components that implement the hooks.
Removed the DEVICE_SUSPEND_ONLY policy as it is redundant and
causes high complexity in the flow. It is also not practical
to use it because it was meant to be used without doing CPU or SOC
low power state operations. This means it would do device PM
operations in the ISR of the system timer used by the scheduler.
This can disrupt the scheduler time.
Added a check of a flag around the notification sent from the ISR
of the wake event and created APIs to set/clear it. This will
allow disabling the notification when not needed from
_sys_soc_suspend().
Jira: ZEP-972
Change-Id: Id7aa7d2683384eabed518d4efac446ecc84c3498
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Layers (modules) above HCI like L2CAP need to know status of applied
security procedure when it's triggered on existing connection. It gives
them possibility to make action in layer specific context on
post-security-procedure conditions.
Change-Id: Ia10078469847b29bb7eb3b1fb376ac305dd0b0fc
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
This makes k_work_submit to allow resubmits when the work is pending so
the user code don't have to check the pending flag to avoid a possible
assert.
Change-Id: Ic39f3dc5936837ce84ad028cf3d426d0558c2925
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds k_work_pending which can be use to check if a k_work is
pending execution.
Change-Id: Ifd56e8d65d555c7e9722c547fe83e13e886d63cd
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes nano_work_submit to allow resubmits when the work is pending
so the user code don't have to check the pending flag to avoid a possible
assert.
Change-Id: I6c9c7a2277aa8e590cedf1d043e55f72f3413451
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds nano_work_pending which can be use to check if a nano_work
is pending execution.
Change-Id: Iae0492a750de93fcd7e89e3a2e74509ffce4983b
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Fix the following compiler warnings/errors that show up with llvm:
tests/bluetooth/shell/src/main.c:594:2: error:
initializing 'const uint8_t *' (aka 'const unsigned char *') with an
expression of type 'char [11]' converts between pointers to integer types
with different sign [-Werror,-Wpointer-sign]
BT_DATA(BT_DATA_NAME_COMPLETE, DEVICE_NAME, DEVICE_NAME_LEN),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/bluetooth/bluetooth.h:93:11: note: expanded
from macro 'BT_DATA'
.data = (_data), \
^~~~~~~
1 error generated.
net/bluetooth/hci_core.c:1759:22: error: passing
'uint8_t [248]' to parameter of type 'const char *' converts between
pointers to integer types with different sign [-Werror,-Wpointer-sign]
name_len = strlen(evt->name);
^~~~~~~~~
lib/libc/minimal/include/string.h:32:34: note: passing
argument to parameter 's' here
extern size_t strlen(const char *s);
^
CC net/bluetooth/log.o
net/bluetooth/hci_core.c:3136:10: error: passing
'uint8_t [248]' to parameter of type 'char *' converts between pointers to
integer types with different sign [-Werror,-Wpointer-sign]
strncpy(name_cp->local_name, CONFIG_BLUETOOTH_BREDR_NAME,
^~~~~~~~~~~~~~~~~~~
lib/libc/minimal/include/string.h:30:39: note: passing
argument to parameter 'd' here
extern char *strncpy(char *_Restrict d, const char *_Restrict s, size_t n);
net/bluetooth/conn.c:301:10: error: passing
'uint8_t [16]' to parameter of type 'char *' converts between pointers to
integer types with different sign [-Werror,-Wpointer-sign]
strncpy(cp->pin_code, pin, sizeof(cp->pin_code));
^~~~~~~~~~~~
lib/libc/minimal/include/string.h:30:39: note: passing
argument to parameter 'd' here
extern char *strncpy(char *_Restrict d, const char *_Restrict s, size_t n);
Change-Id: I342131c6c2b25445382b2317d673561c4087096b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
API Implemented Connect API. This can be used to establish A2DP connection.
Change-Id: I8cf714283a452c40b33fd46de442514a1341264c
Signed-off-by: Itankar, Piyush T <piyush.t.itankar@intel.com>
The reference counting has been an internal trick to handle the TX
fiber, but it's not really needed since we can do the same thing with
the help of the state value.
Change-Id: I9cdaed9afb0b0c07e23d599637328cb863c123b3
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
dlc will be destroyed when ref count reaches 0.
This also moves calling user disconnected callback to destroy
since disocnneted callback will be called whenever dlc is
destroyed regardless of dlc previously been in connected state
or not.
Change-Id: I4a13f8118704c59a88923b74e538063c0db11d77
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
This makes all flags used for BR/EDR L2CAP be stored in single place.
Connection oriented flags and signaling flags are now sharing same
atomic.
Change-Id: If01b29009f9c60ed529338122992b9b5e31f883a
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
The '__unused' tag can be used to inform the compiler that a variable
might be deliberately unused. It can be used instead of ARG_UNUSED().
Change-Id: I0ec4ee92dcec29b5f9cbda362d0d6b051055628a
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Mirrors kernel.h to allow both nanokernel and microkernel applications
easy access to section tags such as __noinit.
Change-Id: Ie01395ac63393b7afbebfe26c723702918bfe9ff
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Replaces it with a pointer as there is no need for an opaque memory
pool type.
Jira: ZEP-916
Change-Id: I5493eed25c9c34e1b850dc3b20699864edb22d28
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Moves the following internal thread group APIs from the public
kernel.h header file to the more private thread.c source file as
they do not need to be public APIs.
_k_task_list_start[];
_k_task_list_end[];
_FOREACH_STATIC_THREAD()
is_in_any_group()
Change-Id: I0b731fb0c20a5574cb1b3c1397803af82918d69d
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
This new macro will trigger a build failure if the compile-time
check fails. Useful for checking static conditions such as
structure sizes or offsets.
Change-Id: I417ea816003b97beb1b5f15bc583c38691f0b8a9
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Binutils ld has an annoying misfeature (apparently a regression from a
few years ago) that alignment directives (and alignment specifiers on
symbols) apply only to the runtime addresses and not, apparently, to
the load address region specified with the "AT>" syntax. The net
result is that by default the LMA output ends up too small for the
addresses generated in RAM. See here for some details:
https://sourceware.org/ml/binutils/2013-06/msg00246.htmlhttps://sourceware.org/ml/binutils/2014-01/msg00350.html
The required workaround/fix is that AFAICT any section which can have
inherit a separate VMA vs. LMA from a previous section must specify an
"ALIGN_WITH_INPUT" attribute. Otherwise the sections will get out of
sync and the XIP data will be wrong at runtime.
No, I don't know why this isn't the default behavior.
A further complexity is that this feature only works as advertised
when the section is declared with the "AT> region" syntax after the
block and not "AT(address)" in the header. If you use the header
syntax (with or without ALIGN_WITH_INPUT), ld appears to DOUBLE-apply
padding and the LMA ends up to big. This is almost certainly a
binutils bug, but it's trivial to work around (and the working syntax
is actually cleaner) so we adjust the usage here.
Note finally that this patch includes an effective reversion of commit
d82e9dd9 ("x86: HACK force alignment for _k_task_list section"), which
was an earlier workaround for what seems to be the same issue.
Jira: ZEP-955
Change-Id: I2accd92901cb61fb546658b87d6752c1cd14de3a
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Was using dlist macro instead of slist macro.
ZEP-1021.
Change-Id: I374ae88289669ca03e3c0c76d33fa0229977e403
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Use the ALIAS_OF() macro instead of using alias attribute
directly.
Change-Id: I2f904644df2212b72d8d973bc3651dcf9e7a8b0d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Removing _ prefix from ALIAS_OF() macro in order to indicate
that it is for public use.
The macro can be used whenever the FUNC_ALIAS() cannot. The
FUNC_ALIAS() macro can give errors if the aliased function
has parameters like uint16_t etc.
Change-Id: I2f5bc51268072141bb6fb73efe034eb743db3257
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
To avoid extra logic in code that creates net_buf fragment lists, make
it possible to pass a NULL pointer as the head net_buf when there are
no previous buffers. Before this change the code would look like this:
if (head) {
net_buf_frag_add(head, buf);
} else {
head = net_buf_ref(buf);
}
After the patch the code can simply do:
head = net_buf_frag_add(head, buf);
This will then do the right thing regardless if head is NULL or
non-NULL.
Change-Id: I300394242e2e243ed3839b25629ec816dd98c148
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Extend the net_buf_frag_del() API to be usable for deleting the head
of a fragment chain. This is useful when parsing a stream-based
protocol encoded into a fragment chain, making code such as the
following possible:
...parse data from 'head' buffer...
/* If current buffer is empty, move to the next one */
if (!head->len) {
head = net_buf_frag_del(NULL, head);
}
Change-Id: I65794bd7fab4e6dadfd2d6b2fa367f9424fd1bde
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Currently passing a constant string (other than a string
literal) to device_get_binding() generates a spurious warning.
The warning is spurious because device_get_binding() does not,
nor is it ever likely to, modify its argument. To fix the
warning we modify the prototype to make clear name will never
be modified.
Change-Id: I2df22de61eb2580b2086a685549900d7ed4a322d
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Interrupt stubs now just push the ISR and parameter onto the stack
and jump to the common interrupt code, never to return.
Change-Id: I82543d8148b5c7dfe116c43f41791f852614bb28
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Simple conversion from ticks for now.
Change-Id: Ib81fc738d45641a6a3a88d2adec1f3eb861f3f97
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The basic conversion, i.e. not handling the TICKS_UNLIMITED case, is
useful internally since the kernel is still tick-based.
Change-Id: I00a01047ec48dad6834dd8ea5dc831eb8c0c2501
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The routine _nano_get_earliest_deadline() is still used by both
the microkernel and nanokernel.
Change-Id: I14501e6d41ca5faac27dead5873ef897e79831aa
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
For unified kernel the routine is implemented through
a wait queue.
Change-Id: Iceab7b821e3b55e0773ad780f4b9b0a1dfc21f5d
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Most apps run fine with static k_timer objects. Don't pay the cost
for the timer pool if no one asks for it.
Also turn off the allocate/free API in the header if it can't possibly
work at runtime as it's an obviously-detectable error that would
otherwise be visible only at runtime.
Change-Id: I492e6e01c4213e3544f707247eea6e4bc601fefd
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Avoids a build error if two or more system devices are declared
in the same C file that use the same init function.
Use _CONCAT() for token concatenation to ensure the names are
properly generated, needed if any of the components are themselves
macros that need to be expanded.
Change-Id: I559bd987617d8cf3bd8c9ee0c985d670b4f59a64
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This API flushes the cached data of an open file to the
storage media. This can be called after writes to avoid data
loss if power is removed unexpectedly.
Jira: ZEP-767
Change-Id: I0f99f2f34126aa8e6a43f69c7a1b6d903937de11
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Adds API to return volume statistics. This is similar to
fstatvfs() POSIX function but limited to total size, free space,
allocation unit size and optimal transfer block size.
Jira: ZEP-636
Change-Id: Ie9e7367b9164277875860c2d0e8de883b2fca07a
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Adds fs_truncate() function which can be used to change the size
of a file. The name is counter intuitive but that is how the POSIX
version is named. It shrinks as well as grows a file.
Jira: ZEP-635 ZEP-622
Change-Id: If7b8cad17e1b80479a529c60a32c12fb134cd456
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Does not need to return anything, since it simply resets the count.
Change-Id: I1185ea1728a9809178afa53b3dba47f7650218e2
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The K_<obj>_DEFINE macros in the unified kernel create objects of name
'name', and not a pointer named 'name' to an object. Some macros
contained the code from early prototyping.
Change-Id: I7262570fbe0b267012874eac0185b4e0cd7f523d
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Merge the Cortex-M3/M4 memory map bits into the master memory map in
prep for it being shared with Cortex-M7 support and Cortex-M0 support
going forward.
Change-Id: I211fc2a2d7d49082b51463f06e6e71cca75d886f
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
So let the helper return the right type.
Change-Id: I850937a70fe042e42c06cb53ad736c8904221f1b
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Mark old device power management API functions as deprecated:
1. device_suspend(struct device *device,int pm_policy)
2. device_resume(struct device *device, int pm_policy)
In addition added deprecated comments for the macro related
to the old API
Jira: ZEP-954
Change-Id: Ibfeeb88f4e6644409296b5f4e2ed02a149d911a2
Signed-off-by: Amir Kaplan <amir.kaplan@intel.com>
Update the power sample and drivers with the new device driver power
management API using the existing logic
Jira: ZEP-954
Change-Id: Idd94232e458767635973e94e9fc673c01612c1e2
Signed-off-by: Amir Kaplan <amir.kaplan@intel.com>
Have one function that can be used for all possible device
purposes using a control code instead of the suspend
resume functions, makes it generic for device control.
Added device power states.
The older replaced APIs will be deprecated in a future patch
Jira: ZEP-954
Change-Id: I6dd3ebfd0fde3546b2d8397f19842f5758fda0c4
Signed-off-by: Amir Kaplan <amir.kaplan@intel.com>
Due to the memory pool structure only static declaration of
memory pool is possible.
Change-Id: I4797ed88fd2ac3b7812ff26e552e1745611c4575
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
This header has a bunch of data structure definitions and macros useful
for manipulating segment descriptors on X86. The old IDT_ENTRY defintion
is removed in favor of the new 'struct segment_descriptor' which can be
used for all segment descriptor types and not just IRQ gates.
We also add some inline helper functions for examining segment registers,
descriptor tables, and doing far jumps/calls.
Change-Id: I640879073afa9765d2a214c3fb3c3305fef94b5e
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add _arch_irq_is_enabled external interrupt API to find out
if an IRQ is enabled.
Change-id: I8ccbaa6d4640c1ab8369d2d35c01a2cfbb02f6cd
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Add irq_is_enabled external interrupt API to find out if an
IRQ is enabled.
Change-id: I4e4fb6318f0c9da442926b34aa6773eb11e90efe
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Semaphore groups are enabled by default. Disabling them will both
decrease the footprint as well as improve the performance of the
k_sem_give() routine.
Change-Id: If6c1b0e2e1f71afd43e620f05f17068039d12b05
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Only define the __printf_like() toolchain macro if it is not already
defined. This permits projects to override this macro if desired.
Change-Id: Ic4a7b3eb48360f8e258493d6f447d3df793f572e
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The Arduino 101 comes with a bootloader that supports DFU
and flashing of all cores using the dfu-util package.
This changes the memory layout of the image built for the
Arduino 101 and remove previous work-arounds to allow booting,
including the version-header section in the linker script.
The bootloader expects the text section at +0x30 from the physical
load address and thus requires special treatment in the linker
script.
Other changes by Andrew Boie:
The flash size parameters were both wrong. X86 side has 192K
of flash from 0x4003000 - 0x40060000, the entire span of
sys_flash1.
ARC side is now the span from 0x40010000 - 0x40030000, 128K.
Change-Id: Iecfa5d2b84a3f522d9eca06268d6b8b71a094aaa
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Patch 3010de9850 changed the
documentation for the ipm_send() 'wait' parameter to something
that is not what the parameter does, and removed some helpful
ancillary information.
Change-Id: Id79950207e9b3d8cfe8f664cbf45fbfa24069dea
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
In 1.0 you could set only one callback on the whole gpio controller. It
was impossible for another sub-system to add another callback, without
overwritting an existing one.
Such API has been obsolete for a long time and no one is using it
anymore. Thus removing it entirely.
Change-Id: I6a17fd99373dc6cef1fa2ebb421e992412d5015e
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This adds the Read Remote Version Info Complete event,
used in both BR/EDR and LE and required by the LE Controller.
Change-Id: I650411ef2c582c20a90eb73bc4475b5e2d4aa2d9
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This adds the Authenticated Payload Timeout expired event,
used in both BR/EDR and LE and required by the LE Controller.
Change-Id: Ifbbccea6d44a7d432734090e56cbf4e7189362b0
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The advertising report (standard or direct) events require
a number of reports field that is used by the controller
to fill in the structure.
At the same time this fixes the subevent code of the direct
advertising report structure.
Change-Id: I0fdb9b1dcad03615ac9b3f1f38fdfbe9ab3f9c3a
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Initialize Handsfree profile for HF Role and register RFCOMM server
channel number to the RFCOMM. And also exposes some basic callbacks
which is required for the application.
Change-Id: Ic79cbd66ef9529c4eb134cc21efcdbc388bb707d
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
Limited number of RFCOMM channels(1-31). Pre-allocated
for profile use and to avoid conflicts.
Change-Id: Ibd081435cf927aa7386161710e48b7371d20af24
Signed-off-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
_SysFatalErrorHandler referenced in BT_ASSERT() is arch
defined. Include nanokernel.h in bluetooth/log.h to include
the necessary arch definitions, as required.
Change-id: Ia39690d2a49db0c9db669a68147fe410abb4213b
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
The BT_HCI_OP_LE_CONN_PARAM_REQ_REPLY and
BT_HCI_OP_LE_CONN_PARAM_REQ_NEG_REPLY command complete events contain
a connection handle that serves to match the command with their
corresponding command complete event when there's more than one
pending. For now this just adds the structure definitions required,
and later on code will need to be added to handle possible mismatches.
Change-Id: I4585888b32ec995b18847c2a6ed488a2da9c8520
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The BT_HCI_OP_LE_LTK_REQ_REPLY and BT_HCI_OP_LE_LTK_REQ_NEG_REPLY
command complete events contain a connection handle that serves to
match the command with their corresponding command complete event
when there's more than one pending. For now this just adds the
structure definitions required, and later on code will need to
be added to handle possible mismatches.
Change-Id: I37e88070bc0d4d1b80f085f7e162c30715a82103
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The length of the commands array in the return parameters of
the HCI Read Local Supported Commands event is 64 bytes
according to the spec. This was mistakenly set as 36 bytes due
to the fact that only 36 out of the 64 bytes currently contain
meaningful data. The actual array as received from the driver
will always be 64 bytes however, and is therefore sized
accordingly.
Change-Id: Iee7f1fc18045dff96efcc808fd81661eced37b03
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Not implemented yet, prevent access to APIs.
Change-Id: I112c1cdee2ad516a0dcffa3239623c61a089d9bc
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
KERNEL_V2 enables the MICROKERNEL flag, but we want the nanokernel
ticker in the unified kernel.
Change-Id: I04e2d31d3834f2d7142bfe0ce9e3334a2faf6fb3
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This allows current code to build but using the definitions from
kernel.h instead of the original headers.
Change-Id: I8f51a83bab4448cd63aa6c54b8e357a8ad6cc1e2
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Workqueues will be brought in as a first-class unified kernel object,
not a misc functionality. Do not use the contents of the header file
when building a unified kernel, but kernel.h instead.
Change-Id: I649558fee92b6565ada0eee81bde9f542a468f9f
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Macro should not use {}, since atomic_t is a scalar type rather
than a structure.
Work by: Allan Stephens <allan.stephens@windriver.com>
Change-Id: Id0991b6ecf841e07015cad01351701bb61b4333c
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The x86 architecture port is fitted with support for the unified kernel,
namely:
- the interrupt exit code now calls _Swap() if the current
thread is not a coop thread and if the scheduler is not locked
- there is no 'task' fields in the _nanokernel anymore: _Swap()
now calls _get_next_ready_thread instead
- the _nanokernel.fiber field is replaced by a more sophisticated
ready_q, based on the microkernel's priority-bitmap-based one
- nano_private includes nano_internal.h from the unified directory
- the FIBER, TASK and PREEMPTIBLE flags do not exist anymore: the thread
priority drives the behaviour
- the tcs uses a dlist for queuing in both ready and wait queues instead
of a custom singly-linked list
- other new fields in the tcs include a schedule-lock count, a
back-pointer to init data (when the task is static) and a pointer to
swap data, needed when a thread pending on _Swap() must be passed more
then just one value (e.g. k_stack_pop() needs an error code and data)
- fiberRtnValueSet() is aliased to _set_thread_return_value since it
also operates on preempt threads now
- _set_thread_return_value_with_data() sets the swap_data field in
addition to a return value from _Swap()
- convenience aliases are created for shorter names:
- _current is defined as _nanokernel.current
- _ready_q is defined as _nanokernel.ready_q
- _Swap() sets the threads's return code to -EAGAIN before swapping out
to prevent timeouts to have to set it (solves hard issues in some
kernel objects).
- Floating point support.
Note that, in _Swap(), the register holding the thread to be swapped in has
been changed from %ecx to %eax in both the legacy kernel and the unified kernel
to take advantage of the fact that the return value of _get_next_ready_thread()
is stored in %eax, and this avoids moving it to %ecx.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: I4ce2bd47bcdc62034c669b5e889fc0f29480c43b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Allow appending a list to another list. The list being appended can be
either a slist or the head and tail of a singly-linked list with the
same node format as the slist.
Change-Id: I14410d2b793e1d9f893ff4e7ce097bee4a93a4be
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
More straightforward than doing sys_slist_peek_head() followed by
sys_slist_remove().
Also add a version that does not check if the list is non-empty to be
used when the list is known bo be non-empty.
Change-Id: I8fd10e20e2c84c7d8972c9207f3d4917884808cb
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Used for operating on all elements of a doubly-linked list.
Change-Id: I9eae26ef6d24ce497dbb3acc8a699598d1547bde
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Commit 3e63a74514 did not revert properly
things.
Change-Id: I792d5698966542ce2cfb9f858c56b30c392f02a2
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If net_send() is success, do not unref the buffer. Free the buf
when it returns error.
Change-Id: Ic154879dfb583d52a0b12fd3e8bfc390a24efec9
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
DEFINE_DEVICE_PM macro was not defining device_pm_ops
as 'static'. Fixes the issue and impacted areas.
Jira: ZEP-639
Change-Id: I5e1de6af97bf7b2b690af0c81034ce167e655e43
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
These impede debugging and we have CONFIG_OMIT_FRAME_POINTER
now which does this globally for the entire kernel.
Change-Id: I46939223e27dd298ca3ed162ff5790cb2e9ed2a2
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
sys_put_le64 stores a 64-bit unsigned integer into an
arbitrary memory location and is alignment-safe for any
architecture.
Change-Id: Ifd9871a509b9cab05a59d81f4917c68dda3cc824
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
You can't query the LOAPIC for every kind of interrupt that fires,
it has no idea about IRQs that were generated by an 'int' instruction
for example. Extend the semantics of _irq_controller_isr_vector_get()
to return -1 if the vector can't be identified.
Issue: ZEP-602
Change-Id: I1174aa62fbedffdcd329d60da8ef14fabb042dc3
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The i2c_burst_read function transfers two messages to the I2C device.
The first message writes the internal address of the device, the second
message then reads bytes. A repeated start (restart) is needed to change
the direction from write to read, but the restart flag should be set in
the second message rather than the first.
Change-Id: I7d48de2f4866e3b514f689f41ce5d28eba90c39f
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Data sent by user will be queued in a FIFO. A TX fiber will be
started for each DLC which process this FIFO and write to L2CAP.
Fiber will sleep in two scenarios - no buffer in FIFO, no TX
credit. Credit is handled using semaphore. So if credit is 0
then fiber will wait on semaphore and will be scheduled when
it receives credit.
Change-Id: Id6e796eed594b28d6fb6e4259d3ed52634db9335
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
This adds helper support for handling 32bit UUIDs
Change-Id: I4874b5f092bdbe30039b8031485bf856e4268f2a
Signed-off-by: Kaustav Dey Biswas <kaustav.d.biswas@intel.com>
To fully support BT Spec. v4.2 LE Topology use LE read supported
states HCI command to find the supported states in the
controller.
Change-id: I6b4cf4cbefdff44e51bb0a4242e0aef3755f43db
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
This adds UUIDs related to HID Service as defined in the assigned
numbers.
Change-Id: I73e8659546587aa9330bcd7d483bc097448e5ced
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Profiles can use this helper to create buffer which reserves the
headroom for rfcomm, l2cap and acl headers
Change-Id: I22f97b54423d66fe0c133a8e9903b652fb6a6854
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
In preparation for the unification of the code in:
drivers/bluetooth/controller/hci
with the existing HCI definitions in Zephyr,
this change addresses both the required usage of spaces
in the alignment of line components that require matching
the alignment of other adjacent lines and also adds all
missing Bluetooth 4.2 LE commands and events so that the
controller code can make use of them.
Jira: ZEP-726
Change-Id: Iabcee6898a09ddaf4479cfe4ecb0eedc194da8a3
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The lmp_*_capable() macros were neither following the appropriate name
space (BT_*) nor the appropriate style (macros should be upper-case).
Introduce a new BT_FEAT_TEST() macro which gives a clearer mapping to
the feature tables found in the core specification. Each specific
feature test macro is now also named with the appropriate BT_FEAT_*
prefix.
Change-Id: Ia6b18b066927908f9bda646e737e63d46a1d17df
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Make is possible to use lmp_ext_feat_capable() both for local as well
as remote features.
Change-Id: I05bb6a25303c0dd2f5e0bbc4f7f412210f668aa3
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Use Read Local Extended Features command to read local features and
extended local features on init.
Change-Id: I4c8594783895f439af36214881aeff24e116e783
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Adds functionality to do connect to remote PSM. Connecting to remote
PSM other than SDP when both support SSP involves raising security
to at least BT_SECURITY_MEDIUM before any CoC traffic on L2CAP layer.
If connection response is send back with status 'pending' it means
remote doing additional job, so restarts RTX timer. If the command
timer is fired detach the apps channel from connection and make it
ready for reuse.
Change-Id: I81f57bc2f5738754f872ce52cb25027db6db5ccf
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Sends the data to l2cap after adding rfcomm header. Profile should
reserve the head room for rfcomm, l2cap and hci headers. Data length
should not be more than dlc mtu.
Flow control is not included in this patch
< ACL Data TX: Handle 256 flags 0x00 dlen 38
Channel: 64 len 34 [PSM 3 mode 0] {chan 0}
RFCOMM: Unnumbered Info with Header Check (UIH) (0xef)
Address: 0x09 cr 0 dlci 0x02
Control: 0xef poll/final 0
Length: 30
FCS: 0x40
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff 40
Change-Id: Ib97dbf85e236a5f75fda6037bb75bc6be00b9dc7
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
This adds queueing support for requests that requires a response making
it simpler to use the API. The storage is keep in the parameters of the
request so it is up to the application to define how many can be queued
but in case the application don't want a request to block waiting for
a buffer it can use BLUETOOTH_ATT_REQ_COUNT to control the available
buffers which is recommended in case the requests will be sent from the
RX fiber.
Change-Id: I407c3982a7ecdc4a9eff7172d9d0addd46949783
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
PN (Parameter negotiation) is used to negotiate parameters like mtu.
Initial credit for flow control is also sent in PN. If the dlci to which
PN requested is not found in the dlc list then it will be treated as
incoming dlc request and accept callback will be called to profile.
Dlc mtu has to be set by profile (before it returns dlc) which will be
negotiated with remote. But the final mtu will be min of mtu provided
by profile, mtu sent by remote, and session mtu
> ACL Data RX: Handle 256 flags 0x02 dlen 18 [hci0] 210.108444
Channel: 64 len 14 [PSM 3 mode 0] {chan 0}
RFCOMM: Unnumbered Info with Header Check (UIH) (0xef)
Address: 0x03 cr 1 dlci 0x00
Control: 0xef poll/final 0
Length: 10
FCS: 0x70
MCC Message type: DLC Parameter Negotiation CMD (0x20)
Length: 8
dlci 2 frame_type 0 credit_flow 15 pri 7
ack_timer 0 frame_size 122 max_retrans 0 credits 7
< ACL Data TX: Handle 256 flags 0x00 dlen 18 [hci0] 210.111452
Channel: 64 len 14 [PSM 3 mode 0] {chan 0}
RFCOMM: Unnumbered Info with Header Check (UIH) (0xef)
Address: 0x01 cr 0 dlci 0x00
Control: 0xef poll/final 0
Length: 10
FCS: 0xaa
MCC Message type: DLC Parameter Negotiation RSP (0x20)
Length: 8
dlci 2 frame_type 0 credit_flow 14 pri 0
ack_timer 0 frame_size 30 max_retrans 0 credits 7
Change-Id: Ifd466db6b3b868d04e38db02ebad6e47ab2da030
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Each public header file needs the #ifdef guards as well as a
declaration for C++ compatibility.
Change-Id: If270de1ee74e2e74eab02d218417d80fcbf422ac
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
HCI RAW channel API is intended to expose HCI interface to the remote
entity. The local Bluetooth controller gets owned by the remote entity
and host Bluetooth stack is not used. RAW API provides direct access
to packets which are sent and received by Bluetooth HCI drivers.
Change-Id: I4ba2b7ca2c2b0d6c5de6ef1f231d1c5b82125e09
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This adds support for setting default BR/EDR name on init. For now
this is just static configuration but can be extended later on
to allow runtime configuration if requested.
< HCI Command: Write Local Name (0x03|0x0013) plen 248
Name: Zephyr
> HCI Event: Command Complete (0x0e) plen 4
Write Local Name (0x03|0x0013) ncmd 1
Status: Success (0x00)
Change-Id: I59ecfc2be8e55c6f90cdb0f12c6fed7f7ce976f8
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Profiles can use this API to register the RFCOMM server channel.
DLC structure which represents individual connnection on a particular
server channel has to be defined in the profile and provide it in
accept callback.
Change-Id: I14e607ca65a29f29389deb2ac5d0658f5cd92883
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
There's a need to add timeout support for control commands on BR/EDR
transport. So far RTX timer feature has application to control protocols
only on LE. Here 'rtx_work' member is moved to common L2CAP context to
safe memory footprint and prepare L2CAP layer to handle RTX timeout
in BR/EDR context.
Change-Id: I9938268a5c4e5dd1f980bb3ec8697d0209c24065
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Originally, x86 just supported APIC. Then later support
for the Mint Valley Interrupt Controller was added. This
controller is mostly similar to the APIC with some differences,
but was integrated in a somewhat hacked-up fashion.
Now we define irq_controller.h, which is a layer of abstraction
between the core arch code and the interrupt controller
implementation.
Contents of the API:
- Controllers with a fixed irq-to-vector mapping define
_IRQ_CONTROLLER_VECTOR_MAPPING(irq) to obtain a compile-time
map between the two.
- _irq_controller_program() notifies the interrupt controller
what vector will be used for a particular IRQ along with triggering
flags
- _irq_controller_isr_vector_get() reports the vector number of
the IRQ currently being serviced
- In assembly language domain, _irq_controller_eoi implements
EOI handling.
- Since triggering options can vary, some common defines for
triggering IRQ_TRIGGER_EDGE, IRQ_TRIGGER_LEVEL, IRQ_POLARITY_HIGH,
IRQ_POLARITY_LOW introduced.
Specific changes made:
- New Kconfig X86_FIXED_IRQ_MAPPING for those interrupt controllers
that have a fixed relationship between IRQ lines and IDT vectors.
- MVIC driver rewritten per the HAS instead of the tortuous methods
used to get it to behave like LOAPIC. We are no longer writing values
to reserved registers. Additional assertions added.
- Some cleanup in the loapic_timer driver to make the MVIC differences
clearer.
- Unused APIs removed, or folded into calling code when used just once.
- MVIC doesn't bother to write a -1 to the intList priority field since
it gets ignored anyway
Issue: ZEP-48
Change-Id: I071a477ea68c36e00c3d0653ce74b3583454154d
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The toolchain headers included an abstraction for defining symbol
names in assembly context in the situation where we're using a
DOS-style assembler that automatically prepends an underscore to
symbol names.
We aren't. Zephyr is an ELF platform. None of our toolchains do
this. Nothing sets the "TOOL_PREPENDS_UNDERSCORE" macro from within
the project, and it surely isn't an industry standard. Yank it out.
Now we can write assembler labels in natural syntax, and a few other
things fall out to simplify too.
(NOTE: these headers contain assembly code and will fail checkpatch.
That is an expected false positive.)
Change-Id: Ic89e74422b52fe50b3b7306a0347d7a560259581
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
These files were almost exactly the same and had already started
bit-rotting (note the missing net_l2 section in linker_harvard.ld)
Issue: ZEP-528
Change-Id: I5039a2c1b86c5764a361b268c33ae8b17da1a9e0
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Use the ATOMIC_DEFINE helper that exists for defining bit fields with
a given name and number of needed bits.
Change-Id: I5262de29f9b2788a16cf61feef676cdc00615f00
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Correct the argument definition inconsistency for the set
value API. To be consistent with other pwm sub drivers, the
on and off arguments for the set value api are re-defined.
On: how far (number of timer count) from the beginning of a PWM
cycle the PWM pin will be asserted.
Off:how far (number of timer count) from the beginning of a PWM
cycle the PWM pin will be de-asserted.
Jira: ZEP-642
Change-Id: I7b39f98f1935fc3499fb36dd813abed62b86c1e7
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Completing the terminology change started with change 4008
by updating the Kconfig files processed to produce the
online documentation, plus header files processed by
doxygen. References to 'platform' are change to 'board'
Change-Id: Id0ed3dc1439a0ea0a4bd19d4904889cf79bec33e
Jira: ZEP-534
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
A previous re-work of IRQ priorities was led astray by an incorrect
comment. Priority level 1 is not a non-maskable interrupt priority.
In addition, zero latency IRQs are not implemented on ARC.
Timer driver now doesn't specify IRQ_ZERO_LATENCY (as that wouldn't be
correct) and its IRQ priority is now tunable in Kconfig. The default is 0.
IPM driver on both ARC and x86 side were being configured with hard-coded
priority of 2, which wasn't valid for ARC and caused an assertion failure.
The priority level is now tunable with Kconfig and defaults to 1 for ARC.
Issue: ZEP-693
Change-Id: If76dbfee214be7630d787be0bce4549a1ecbcb5b
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
These console messages are for debugging and if sent too
rapidly, could be discarded. This was causing false positives on
test cases which rely on console output to determine success or
failure.
Issue: ZEP-704
Change-Id: I5a86c761311cde90f295cd2e65f2e70608f875fa
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
At some point these were moved to include/drivers/
Change-Id: I5130a4d48b3bbff6ab03b6103bec0f53d88deb7b
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Update the comment for spi frequency. The QMSI shim driver
only accepts clock divider.
Jira: ZEP-461
Change-Id: I4d89a3810b002d594b0c10bf6d33544b7549191f
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Adds documentation of file system APIs
Jira: ZEP-643
Change-Id: Ieac14a3dcf4913aeba6da2d3dc718eaa09b6cd88
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
This reverts commit d73a9bb9c6.
The patch was intended for 1.6.0 release.
Change-Id: Id42058b746a3d2a54e4b1a2983eb58bd10b1ed40
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Adds the ENC28J60 Ethernet module driver.
Origin: Original
JIRA: ZEP-291
Change-Id: I2b5790ecb251f9059f172bcaafadef24bd27207a
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
It's an important header, used in many place and it's thus very easy to
get different sub-system loading it thus leading to redefinition error.
(net_buf and net drivers for instance).
Change-Id: Icbbbc2fc0abcb007d8950dd06b601717960e7215
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Adds the glue layer to interface the Fat FS module with Zephyr
file system API.
Origin: Original
Jira: ZEP-228 ZEP-483
Change-Id: I878fdad8ecaf46992d6163e24a9b0b633f49154f
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Adds the header files containing Zephyr File System API
descriptions and interfaces.
Origin: Original
Jira: ZEP-228 ZEP-480
Change-Id: I76a000187a133df7a82329af78aec9ea6511915c
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Adds the diskio interface for the FAT file system. This
revision uses RAM to emulate disk storage.
Origin: Original
Jira: ZEP-285
Change-Id: I7a30c8761d5ed9b564f1d1e08482c5ef199d7372
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Drivers that implement power management should use the preferred
device_pm_ops method instead.
Change-Id: I9ae06e26b77325265bbe46bdee82ba39dedb6b79
Signed-off-by: Iván Briano <ivan.briano@intel.com>
Drivers that implement power management should use the preferred
device_pm_ops method instead.
Change-Id: I337722b1e06afe8508b5c84c00c3542571232e07
Signed-off-by: Iván Briano <ivan.briano@intel.com>
Drivers that implement power management should use the preferred
device_pm_ops method instead.
Change-Id: Ice9e0469a1fcb50eb64dcb240dddea56755b6e84
Signed-off-by: Iván Briano <ivan.briano@intel.com>
Previously, exception stubs had to be declared in assembly
language files. Now we have two new APIs to regsiter exception
handlers at C toplevel:
_EXCEPTION_CONNECT_CODE(handler, vector)
_EXCEPTION_CONNECT_NOCODE(handler, vector)
For x86 exceptions that do and do not push error codes onto
the stack respectively.
In addition, it's now no longer necessary to #define around
exception registration. We now use .gnu.linkonce magic such that
the first _EXCEPTION_CONNECT_*() that the linker finds is used
for the specified vector. Applications are free to install their
own exception handlers which will take precedence over default
handlers such as installed by arch/x86/core/fatal.c
Some Makefiles have been adjusted so that the default exception
handlers in arch/x86/core/fatal.c are linked last. The code has
been tested that the right order of precedence is taken for
exceptions overridden in the floating point, gdb debug, or
application code. The asm SYS_NANO_CPU_EXC_CONNECT API has been
removed; it was ill- conceived as it only worked for exceptions
that didn't push error codes. All the asm NANO_CPU_EXC_CONNECT_*
APIs are gone as well in favor of the new _EXCEPTION_CONNNECT_*()
APIs.
CONFIG_EXCEPTION_DEBUG no longer needs to be disabled for test
cases that define their own exception handlers.
Issue: ZEP-203
Change-Id: I782e0143fba832d18cdf4daaa7e47820595fe041
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Rather than embedding the ISR stub directly inside the function that
invokes IRQ_CONNECT(), stick all the generated stubs in the
.text.irqstubs section.
In this way, we make things easier to debug since the stub code isn't
mixed in with the "calling" function's assembly, and we no longer
need an instruction to jump over it.
Since these are now in their own section and not embedded inside an
unrelated init function, we unconditionally generate descriptive
symbol names for each stub based on the name of the handler and the
IRQ line.
Example for HPET timer on IRQ #2:
00100440 T _timer_int_handler <-- driver ISR
00100590 T _timer_int_handler_irq2_stub <-- generated stub
Change-Id: I49425aef7775edbca8ad7f61d2d4f9c41cb0d39d
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
These shouldn't be exported in the official doxygen documentation
since they should only be used through the other conversion APIs.
Change-Id: I75880b42892cbfce769192ec2e8c296c954979bd
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Based on review comments for previous patch at
https://gerrit.zephyrproject.org/r/3392.
The macro changed to ATOMIC_DEFINE since it reserves storage
and doesn't just announce its existence.
Change-Id: Ib6c2b76a219040694926823b94daf6fe779a05d0
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The atomic_t API supports arbitrary sized bit fields which are not
limited to a single atomic_t variable. This patch introduces a macro
to help declare right-sized atomic_t arrays given the number of bits
needed.
Change-Id: I226f6312b642551fc492df29d24764222f45ac83
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We have already done this on x86 and ARM. The policy is as follows:
* IRQ priority levels starting at 0 all have the same semantics and
do not have special properties. The priority level is either ignored
on arches which do not support programmable priority levels, or lower
priority levels take precedence over higher ones.
* Special-case priorty levels are specified via flags, in which case
the supplied priority level is ignored.
Issue: ZEP-60
Change-Id: Ic603f49299ee1426fb9350ca29d0b8ef96a1d53a
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Implements CoC channel disconnect API initiated from local and handles
response to the disconnect request from remote.
Change-Id: I25f2495404cd405dc83ad56269e4897e53d602e6
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Applies on L2CAP channel object security requirement member and
implements on BR/EDR transport basic security cases during incoming
CoC connection request. Since channel security requirements can involve
sending 2 separate connection responses with proper results depending on
context path, there's a need to store L2CAP signaling identifier set in
original connection request to be restored later to help match proper
response context.
Change-Id: Ibac9a5d2443f2975637e1bd15f61afcad53f843b
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
bt_gatt_exchange_mtu does actually return an int, also change the align
the description properly so it is consistent with other functions.
Change-Id: I6a0780830e13ded15e6262a46094441a2ef662c8
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Depending on advertising options this can be non-connectable address.
NFC pairing application document also allows broadcaster/observer
roles.
Change-Id: I9b104ac8fb9752a083a7a31fc20598c66f23f608
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Moves 'ident' member so far included in bt_l2cap_le_chan context only
to common bt_l2cap_chan context. The change is driven by sharing ability
to store/restore 'ident' on both transports and makes use of it only if
CoC is configured. For default configuration there's channel addition
helper to be used internally by dedicated macros managing channel
objects enlisted in connection tracker list.
The common member is used in matching outstanding connection responses
on LE and to prepare a ground for BR/EDR transport context when
there'll be a need to match response to original incoming connection
request after in-between security changes that can happen.
Change-Id: I1a4cad7cd53c74774604a0e9794607081a8b6e80
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Follow up to TSC decission for further discussion in the networking
WIG.
Change-Id: I148b484dfe308661573e47ed3e60cceed673bddf
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
This is part of a change to enable device suspend/resume and
Deep Sleep support in applications. Adds suspend/resume handling
in loapic timer.
Jira: ZEP-512
Change-Id: I9da2c8419bd9109fb71ef5a6caf736de7c7de9e1
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Enhances the DEVICE_INIT_PM and SYS_INIT_PM macros so the drivers
can avoid #ifdef checks in C code. This also prepares for future
merging of the different versions of these macros.
Change-Id: I2cc50686a2e2c6bdf675bff8b208f741231c2537
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
These helpers provide a way to read and write data buffers containing
multi-byte integers with a specific endianness. They are particularly
convenient for network protocol encoding and decoding.
Change-Id: I09ad125a1bbc4510b97a1d75c83cb70d893e22e8
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add doxygen documentation for existing documentation in byteorder.h.
Change-Id: I0de668e140eeb011807c31d47212f452ccd81627
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If the reason strings were omitted, the build was only
failing if assertions were turned on, in printk().
Now it fails regardless of whether they are turned on.
Change-Id: I90721a5babb89b20bf8430e122eb03a4ec62c46f
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This allows to query information needed for Out Of Band pairing
or connection creation. Currently supports only BT addresses.
Change-Id: I60bf9344baee552e7743fa8fc1b3cfb3a4765334
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Creating FIFO using DEFINE_FIFO should result in a new buffer in noinit
section which can be used only by this particular FIFO. Currently all
FIFOs unintentionally use the same buffer (__name_buffer). Fixed FIFO
buffer name generation, so now each FIFO has its own unique buffer.
Change-Id: I7ee8250f70b141254a4c98f0ed1a7b9a29dec0c8
JIRA: ZEP-523
Signed-off-by: Mariusz Okroj <mariusz.okroj@intel.com>
This lets the callback take advantage of the powerful net_buf API for
parsing the advertising data content.
Change-Id: Id65e6e83efd60c0f36c47bc5446a2e8ec2833d7c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This makes bt_gatt_write consistent with the rest of the API where the
parameters are passed back to its callback.
Change-Id: Ie94208aa661d3620d0cbc5be4a4fb5b3c3ef061c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Occasionally it may be useful to pass a buffer to a subroutine and
have the routine do parsing of the buffer. However, since there isn't
necessarily a guarantee of how the subroutine performs the parsing it
may be necessary to restore to a well known state after the routine
returns.
This patch adds a simple struct for storing the parsing state as well
as two new functions to save and restore the state.
Change-Id: If9153ff9997021c76243ea9ebff13dfe94c45faa
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add helper to add 32-bit big endian data to net_buf and
net_buf_simple.
Change-Id: Ib6359558abcbed824365928327277ad69aa51e99
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Improves placement of well known storage keys type values description
in Bluetooth API documentation by moving the comment to separate line
above the item it describes.
Change-Id: I6a9182d135983c5037cf44a4fda4305abfa4387f
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Improves placement of HCI buffer types description in Bluetooth API
documentation by moving the proper comment describing the value to
separate line above the item.
Change-Id: I15fb72842853b774a066f2c4f075547eb22a406e
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Improves placement of available connection type values in Bluetooth API
documentation by moving comment describing the value to separate line
above item.
Change-Id: I50eab1eb9659e20da35cd35a6fa0d6fabde3f63d
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Arches now select whether they want to use the GCC built-ins,
their own assembly implementation, or the generic C code.
At the moment, the SDK compilers only support builtins for ARM
and X86. ZEP-557 opened to investigate further.
Change-Id: I53e411b4967d87f737338379bd482bd653f19422
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Improves placement of security levels value description in Bluetooth API
documentation by moving to separate line proper comment describing
the value meaning.
Change-Id: Ia2f58282bb664bf96cda888412900024c6ddf4b0
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Improves placement of channel states value description in Bluetooth API
documentation by moving to separate line proper comment describing
the value meaning.
Change-Id: Ib111884bd4a52bdb023b872598a852fc441fefe5
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Nios II appears to have an issue with the 'stbio' instruction.
When executing this code:
0x00400848 <+136>: stbio r3,0(r2)
With these registers:
r2 0x44000c 4456460
r3 0x3 3
The memory location (which is a memory-mapped register in the
NS16550 IP block) ends up with the value 0x103 instead of 0x3 as
expected. Before the instruction ran, the register had 0 in it.
32-bit version doesn't seem to have this problem, use that
everywhere for now. This issue has been reported to Altera.
Change-Id: I4ff0ff4cc7f9b18006d3f7a777eb292924843644
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
When each side involved in getting configured L2CAP CoC channel on
BR/EDR transport aggrees on configuration contract regarding in/out MTU,
set proper context flags to start prepare finalize config process.
Change-Id: Ic821ea3b961442be758ad4e2d91b2d812e2a54b5
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Adds CoC channel's context to hold channel setup state and SM routine
that evaluates validness of transitions.
At the beginning DISCONNECTED, CONNECT and CONFIG states are added and
used by CoC setup on BR/EDR transport.
Change-Id: I1bbd16ec2f59ea961791786b78f22834d6f4b4d8
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Rename left-over mentions of 'bt_buf' and ensure that all parameter
descriptions end with a period.
Change-Id: Ie63e63920a8bfea2d02806a65306421264c9f89b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Some issues have been noted with nested interrupts on quark SE.
In particular, the wrong vector # being sent to the IOAPIC EOI
register. Now when doing EOI, we lock interrupts so that the act
of reading the current vector being serviced, and sending EOI
to both controllers happens atomically.
Change-Id: Id9ad992740e197bb9d4638764952b04a27c4af61
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Having two parallel implementations is a maintenance issue, especially
when some strategically placed #ifdefs will suffice.
We prefer the ASM versions for SYS V, as we need complete control of
the emitted assembly for interrupt handling and context switching.
The SYS V code is far more mature. IAMCU C code has known issues with
-fomit-frame-pointer.
The only difference between the two calling conventions is that the
first three function arguments are provided in eax, edx, ecx instead
of on the stack.
Issue: ZEP-49
Change-Id: I9245e4b0ffbeb6d890a4f08bc8a3a49faa6d8e7b
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This adds reading of included service attribute 128bit UUID.
The limitation of this solution is that if several attr handle-range
pairs will be received, this will read first attribute UUID and then
start discovery from the the succeeding handle.
ZEP-373
Discovery related test results:
2/76 GATT TC_GAD_CL_BV_02_C PASS
3/76 GATT TC_GAD_CL_BV_03_C PASS
4/76 GATT TC_GAD_CL_BV_04_C PASS
5/76 GATT TC_GAD_CL_BV_05_C PASS
6/76 GATT TC_GAD_CL_BV_06_C PASS
Change-Id: I27185b3a3ae96c9c03b0f356492df18ba83b183a
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Add a macro to easily define net_buf_simple stack variables, as well
as a helper to initialize them.
Change-Id: I3e4ffc172843a0946e8159618c8f84a87fc682bc
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The helper macro NET_ARP_BUF() needs to be used from other
files so arp.h is proper place for it.
Change-Id: Ief7bbb385d9c180213ecd7cb08023f13999f5270
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It is then clear what logic to expect once such verdict has been given.
Change-Id: Id64ff00e65ffe2dad45673d1eca4eb76ae3ae1f6
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
As there is a L2 in the middle, there is no need for a net_if to provide
such information.
Change-Id: I58a35d4d124cd8a67026f32e71713ef06f43b7c5
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Net core then does not know anything about l2 related logic.
For instance ARP is used in ethernet l2 API and nowhere else.
This will be helpful when adding different technologies altogether.
Currently, only SLIP driver is enabled to use relevant l2 layer.
Change-Id: I03c93326321028d04222733ca4083e3c6b785202
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
net_core.h is the ground brick of the IP stack, and thus should not
include other headers that might include net_core.h also: this would
create circular dependencies.
Change-Id: I70c17b736788528e4e0b4b5b2c478098b049c9b1
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Makes code cleaner so it won't be necessary to access the net_if
internal queue directly.
Change-Id: I119a54e0639843093fa0da6f11e590e8990525d8
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is meant to stay in 80 chars line length limit.
Change-Id: Ib3b3b1cf5e05fec2407e470ae3600ff5a4c6a505
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
__packed is an alias for __attribute__(packed) and is declared in
toochain's headers.
Change-Id: Ib9d136a1a2dd401194988d6573bf7778f07dbfb6
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Small IPv4 ARP cache that is used in Ethernet networks.
Change-Id: I9ab38ee14a799f8573f4d4e0eade1be107d42f1a
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The network device driver can specify what kind of functionality
it supports. Currently there exists one flag that can be used
in ethernet devices that tells that ARP should be enabled.
Change-Id: Ieaaefcfc7cdd65f44190248f507ac3cb512a323e
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Making sure we are doing the IP address assignment correctly.
Change-Id: I8bf9233b932321a14df99ce49a39581f1343d004
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This just renames the existing net_buf helper APIs to corresponding
net_buf_simple APIs and then defines the old net_buf API names as
macros mapping to the new net_buf_simple helpers.
Change-Id: I3c2b35683c0fde66f5f697be2c34c01172af8e31
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The object has the same layout as the last fields of the existing
net_buf. To maintain backwards compatibility net_buf receives a union
so that the old data, len and size members can be accessed as before,
however they are located in the same memory as the actual
net_buf_simple members.
Change-Id: I22d208faba30fe41c5ada17e6d13e641f528729a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This is in preparation of introducing a new net_buf_simple object &
API.
Change-Id: I624b86e5d2c9f4e9d3647b2fe21ce8b89750256f
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Now that net_send and net_reply yield, this behaviour should be
documented.
Jira: ZEP-469
Jira: ZEP-497
Change-Id: I8c3cf7bda009aa6e89f880447fd3b6a491f5d9ef
Signed-off-by: Jaakko Hannikainen <jaakko.hannikainen@intel.com>
Use IOAPIC_EDGE instead of IOAPIC_LEVEL to fix missing interrupts.
During tests it was found that using IOAPIC_LEVEL interrupts for UART at
some points are lost.
Proposed by Calando, Antoine <antoine.calando@intel.com>
Change-Id: I18b20217c4d73fdeaa424bf59d00f6be1ec6ef1b
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Call ICMPv4 handler when receiving such a network packet.
Currently only echo-request is handled.
Change-Id: Ib59c65b38f13c484f1842485118dad32fb6a6f36
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Each network interface needs its own stack for TX fiber.
Change-Id: I9647c2b945a3d36bc77c00dad11badb0d5f851e5
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This function is not meant to be used by applications as it
requires that the IP headers etc. are already in place.
Change-Id: I9099671111a029cdf630d131d7af09b147486f64
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Renamed net_recv() to net_recv_data() so that the more generic
name can be used by applications. The net_recv_data() is only
meant to be used when L2 layer feeds data into L3 (IP) layer.
Change-Id: Iba155d51f81e3b99964fa916fe87a05a8bf8766a
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add a macro to get and cast the ICMP protocol header.
Change-Id: Ief3f69d1b3dbe9dd55bc0a032b3506c8e0370563
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The nbuf macros for getting the pointer to start of IP, UDP
and ICMP buffer were incorrect.
Change-Id: I6309bd50cdf2cbf0c6c23b4b349c7c084cfe928d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Some API functions that check IP addresses were not documented
properly.
Change-Id: I0e7361447db55037888c62ada6b55e3cf5f410f7
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Check if we have received IPv4 packet and call a handler
function to process it.
Change-Id: I9f9e5f0888d2c3b91401c98f4925647ddce09962
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Added more functions to get proper IPv6 address from
a given network interface.
Change-Id: I5aecdb35eb549a0781949134ab4821dcb8ce9e7b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allow user to assign IPv4 addresses to a network interface.
Change-Id: I77be4ed5eb0231eb12b4ad47cb6076c8f4238124
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The caller is able to add and lookup network interface IPv6
addresses.
Change-Id: I7f43e18bd1fa69c7dcd2f6b46ad33043c28b92e9
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
IPv6 utility functions that check if a given IPv6 address
belongs to one of host network interfaces, and whether
the address is a given type.
Change-Id: If251534ae0af41963d45e305e7ba505a940d2fdc
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
These are needed when parsing IPv6 packet.
Change-Id: I56ab93d45727c57f2d9db47baeb5b5a3725a0c46
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the source address is multicast, then drop the IPv6 packet.
Change-Id: Ibe733161d67f047469a25a5955c41c335e472945
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Check if we have received IPv6 packet and call a handler
function to process it.
Change-Id: I1226729685ae2a805128b587e2a37e0016d53ecc
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Collect network statistics if CONFIG_NET_STATISTICS is
defined.
Change-Id: Id217daa3e19142c95396dc391ba2dc4123b18b22
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Currently all received packets are dropped as this is just
the initial patch enabling the receive support.
Change-Id: Ib06735f498a80edb8c9f7c5ec6f536a5ac1d362a
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Ensure that all parameters and return values are properly documented.
Change-Id: I04b19701355e994ba45cbc98167386c01d0f607b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Instead of directly calling printk/printf, the network printing
macros will use syslog macros defined in sys_log.h
Change-Id: I3f12f81557f50b24ca47a43f345162f9ffbd574c
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The send() function is called from IP stack and it is used
when the network packet needs to be send via a specific
network interface.
Change-Id: Id6ce86b1748915fee73b62366dee13fcb7cf11a1
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This will return the network interface that has some specific
link address.
Change-Id: Iaebcf6e769d4f91f3cda6d3a0779324f89603b54
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This macro can be used to check stack usage. It should only
be used when debugging is activated.
Change-Id: I99fe6f9db1f3e955152a91f3a18d031126172cfd
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The NET_IF_INIT() macro used parameter pasting incorrectly.
Change-Id: I40a988ffb06ce135731cd69f18931b7507cd71cc
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
User should use the net_nbuf API that is supporting a concept
of RX, TX and DATA buffers, instead of using directly the net_buf
low level API.
Change-Id: I3b8f5f13cd37d42d2322a58b35573e117d520c54
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Save 12 bytes per IP address if IPv4 is active and IPv6 is not.
Change-Id: Ia01d2feb83e6ba80b2775f9eed3065c956932632
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Network drivers should call this when new data has been
received from network.
Change-Id: Ife78fa0683b8c410c38358300a6a18e9325f0ef8
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Network packets to be sent are placed to correct fifo that
is allocated to certain network interface.
Change-Id: Idd5eded42758c5bed2c18769122c38d9d03dc419
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This will be used by the new network stack to relate a device to actual
network context, and used in the different layers (mac, ip ...).
Change-Id: I30c08fa975314544c36b71636fd9653d562891b3
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It only describes the structure for now, but will then provide helpers.
Change-Id: I7ac7717a3289086dac50d90e25b2a1ce7d7abc91
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is a placeholder that just compiles but does nothing else.
Change-Id: I9689fa26eb13bc23d29940938f7b3c11f32b2ff1
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Utility function net_buf_frags_len() calculates amount of data
stored in the fragments.
Change-Id: I89ebc8dac4f216ff9e77b5c44002082398957f7b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The code for adding and removing channels is very similar for LE and
BR/EDR so it can be unified and just leave the CID allocation up for the
bearer implementation.
Change-Id: Icf4c66262c4e973039381ebd1861fad4d46e1535
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
User can add fragments to the network packet if the data cannot
be placed in one buffer.
Change-Id: I060ef533cc4fdda0f38405fb7dc72015f5cac7fc
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This has so far been used in SMP code as the h() function. Now it has
a more generic name and is accessible by all parts of the Bluetooth
subsystem.
Change-Id: Iae4607da9c8b3e6779d9c97f84a4e486d5258ef0
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This is similar to the other net_buf_*_u8() helpers that already
exist.
Change-Id: I63fc963877c1946964e675067dd98f748be7cbbc
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add helpers for big-endian 16-bit values, similar to the ones that
already exist for little-endian values.
Change-Id: I63bf4dd7df802669ea6657cd95d6da48e6176487
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This API allows initializing the buffer with a given headroom. This
prepares the way for eventually removing the 'reserve_head' parameter
from the net_buf_get APIs, but can already now be useful in some
scenarios where the headroom is desired to be different than some
higher level API sets it to be.
Change-Id: Iffbe5761fdf3d2ad8cb4b8437b1074cf42ea9c6c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Until now, NET_BUF_POOL() would be opportunistic and allocate a few
more bytes extra for the buffer content if the given size wasn't a
multiple of 4. This is an issue however if the API user really wants
to have a precise size for the buffer so that e.g. net_buf_tailroom
gives meaningful and deterministic results.
This patch removes the opportunistic rounding up, basically leaving it
up to the application to decide if it wants to have unused padding in
the data structure or not.
The crucial thing here is to ensure that locating the user data
section (which is aligned to a 4-byte boundary) doesn't break, since
buf->size is used for that. However, the net_buf_user_data()
implementation already uses ROUND_UP() so the result will still be
the same even if buf->size is not a multiple of 4.
Change-Id: I4bc17139cda19a680180c2d326d417a41ad0d4cd
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Used by ARC, ARM, Nios II. x86 has alternate code done in assembly.
Linker scripts had some alarming comments about data/BSS overlap,
but the beginning of BSS is aligned so this can't happen even if
the end of data isn't.
The common code doesn't use fake pointer values for the number of
words in these sections, don't compute or export them.
Change-Id: I4291c2a6d0222d0a3e95c140deae7539ebab3cc3
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This adds initial timeout handling as described in the spec:
BLUETOOTH SPECIFICATION Version 4.2 [Vol 3, Part A] page 126:
'The value of this timer is implementation-dependent but the minimum
initial value is 1 second and the maximum initial value is 60
seconds. One RTX timer shall exist for each outstanding signaling
request, including each Echo Request. The timer disappears on the
final expiration, when the response is received, or the physical
link is lost.'
Note: As for the actual interval used they are based on the values used
in Linux but in case of disconnect the minimum of 1 seconds was used
to follow the text above.
Change-Id: Ib98899c3ff07334955aee9c8fb53b1b89ba7bf31
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
We now allow use of -mgpopt=global and -mgpopt=data. The 'global'
option is now the default instead of compiler-default local, expanding
global pointer usage to all small data in the system.
For systems where all RAM is less than 64K, the 'data' option may be
appropriate.
Some fixes had to be made to the system in order to get around some
issues:
* prep_c.c no longer uses fake linker variables to figure out the size
of data or BSS, as these gave the linker fits as it tried to compute
relative addresses to them.
* _k_task_ptr_idle is create by sysgen and placed in a special section.
Any small data in a special section needs to be declared extern
with __attribute__((section)) else the compiler will assume it's in
.sdata.
* same situation with extern references to k_pipe_t (fixed pipe_priv
test)
For legacy applications being ported to Nios II which do things that
freak out global pointer calculation, it can be disabled entirely.
Change-Id: I5eb86ee8aefb8e2fac49c5cdd104ee19cea23f6f
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
needs to be 0x8000 after .sdata and .sbss sections since
register offsets are 16-bit signed values.
Change-Id: Ia7486d32af81e54a6ebac6be7ec308dfdeafe79e
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
A workaround used to silence a warning in the doc generation process
which involved tagging a structure with a #define can now be solved
with a cleaner approach which is non-code-invasive.
Backup said change and update documentation on what to do when the
issue is found.
Change-Id: I1ef5224cd1b2df2e57c2ace438dba90ba3fc8528
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
If ACL is disconnected with channels still active the code should call
l2cap_chan_del to clean it up properly.
Change-Id: Iffa9345a9697ac80c1f2295578c7161ffeb44420
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The caches get initialized on boot and flushed after XIP copy
takes place.
Change-Id: I642a14232835a0cf41e007860f5cdb8a2ade1f50
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Added missing (placeholder) comment on struct sensor_trigger_config
Removed @ref references to undefined terms
Fixed a misspelling while I was there too.
Jira: ZEP-487
Change-Id: I314f243cbd58cab48da33abd2f181b9aeb17b0e9
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Missing from the header, likely due to other arches always calling
this from ASM-land.
Change-Id: Id90e0269a4f9e17b78c48eb7df3b6cde08c53d2a
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Move LOW_BYTE and HIGH_BYTE macros from usb_common.h to
samples code.
Change-Id: I26296bde8c5b3991b3bfab71272c861b5360ce97
Signed-off-by: Adrian Bradianu <adrian.bradianu@windriver.com>
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
CDC ACM sample class driver implements a virtual UART port.
SET_LINE_CODING, GET_LINE_CODING and SET_CONTROL_LINE_STATE
class requests are supported.
DFU class example does not perform an actual firmware upgrade,
instead it allows the user to upload a file at a predetermined flash
address or to download the content from that flash address.
Change-Id: I702e6727db15ef360d110a70a979c1e4bd4ee1bb
Signed-off-by: Adrian Bradianu <adrian.bradianu@windriver.com>
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
USB Device core layer is a hardware independent interface between USB
device controller driver and USB device class drivers or customer
applications. It's a port of the LPCUSB device stack.
Change-Id: I9371ffab7034d20953fec0525e72fbe9e094c931
Signed-off-by: Adrian Bradianu <adrian.bradianu@windriver.com>
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Replaces all occurences of LE_CHAN() macro with new name
BT_L2CAP_LE_CHAN() and makes it public.
Change-Id: I426b17b0214f7ab4b69e5febbdca1917f22e7487
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
This improves readability of the debug logs.
Change-Id: Ib661535bcbb990cc8a807d40ff570aa11a293c54
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The __stack and __noinit defines require sections.h.
Change-Id: I15f69b2ac9bc737016c986b21c76e576465bfdf7
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add USB device controller header file containing the USB device
controller APIs. All device controller drivers should implement the
APIs described in this file.
Change-Id: I14443a5286bbc2faddbd6420ce1668acb183cd2e
Signed-off-by: Adrian Bradianu <adrian.bradianu@windriver.com>
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Add arithmetic_shift_right function, as the behaviour for shifting right a
negative signed value is implementation-defined (see ISO/IEC 9899 §6.5.7).
Change-Id: I05d930a96e8591dc248295bff853ed9e9cb263a2
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
Updates the exception stack frame structure to include floating point
registers.
Change-Id: I0fef784cf4d91dda245180abd75bfd9221825fba
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Command Status, Command Complete and Number of Complete Packets are
used for driving TX fibers (HCI and connection). Missing any of
those event will lead to HCI traffic stall.
Priority pool will be used when critical HCI event is received
or normal pool runs out of buffers. The difference with priority
pool is that buffer from it must not be passed to RX fiber and
must be freed from bt_recv.
If driver knows HCI event opcode before requesting buffer for event
it may hint HCI core about preferred pool selection.
Change-Id: Iad14724945bb59721c5ffb6b62d5a8a3e3f70be7
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This will allow the capable drivers to add arbitrary duration
to the PWM cycles
Jira: ZEP-69
Change-Id: I688b3aa5c1f93e4ed81eab994c13696608ab609a
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
4 is the correct value for this arch, the CPU will freak out
if functions aren't 4-byte aligned.
Change-Id: I3d6742516cb323680ab1f9fe7b1a88de1fbf1fae
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We are not going to handle unimplemented math instruction
exceptions at runtime. Remove remaining comments and exports
related to this. We don't need to leave a gap in the exception
stack frame for it either.
Change-Id: I4f1f3980a0e43bbf6f2f7488a9182f7acb06be05
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This adds flags parameter to write callback which can be used to indicate
that data only need to be prepared with use of BT_GATT_WRITE_FLAG_PREPARE
fixing qualification tests that needs to check authorization or other
errors that cannot be verified with just the permissions.
Change-Id: I3d662b2027718ffb52a280e3bbc9750be14f89ae
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes it easier to document and more aligned to other parts of the
API that do make use of bitfields.
Change-Id: If1ff89d653537d854a4f788bf845d2ab6fe5bc23
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This way it is easier to understand what bits are being set.
Change-Id: I17cbcc8adcbacb32d20142b557060759e5b7cd81
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes the code be a bit clearer by letting it specify a more
descriptive value than '0'.
Change-Id: I2e6b46f0924581d0d13f13479aa15170cc9e0e70
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Applications or higher level profiles that are not part of the core
Bluetooth stack may need an easy way to generate random numbers. Since
we already have an internal helper for this export it for others to
use as well.
Change-Id: I29af7cab30ad8f60d481bc847984e781eaecd6bf
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
These are no-ops since this is not an arch that isn't byte-
addressable.
Change-Id: I09b0fd8b8d85f67bcca2dcb6ebc35843c19afa45
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Fixed group end and undefined refs.
Change-Id: Iad0ab7b0dd858955d95f298a772d8d84bb4ee1c9
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
Add some macros that drivers and applications can use in describing I2C
clients.
Change-Id: Ic7af97804e88ed3b9d4f68f9ac358a425f4cc17c
Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
Define some configuration structures and macros that can be used in
device configuration. These usage scenarios are as follows:
* device drivers will use SENSOR_DECLARE_* macros in their device
configuration structures and SENSOR_GET_* macros in the init
functions;
* application code will use SENSOR_TRIG_* to fill in the device
configuration structures.
Change-Id: I3a897999175b14a4cd1111da4c26434741294e52
Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
Using macros does not let the compiler verifying about the type we are
providing, which usually give an error easier to understand.
Also, this will let the compiler deciding how to actually optimize
(inline or not) the code.
Change-Id: I17fb1f5a1c1854461fad101bbb40c9be33844c8b
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Supports Internal Interrupt Controller only for now; EIC
supoort tracked in ZEP-258.
Change-Id: I2d9c5180e61c06b377fce4bda8a59042b68d58f2
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The technical manuals and example HAL code frequently refer to
register bank numbers from some base address. Add these helper
functions to read and write registers correctly using this
notation.
Change-Id: Ia082f5cc89081fcea2cb6ad8204c1b9b2650d3fd
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Make sure all is documented, and the comments properly formated.
Change-Id: I7431535b0f3a409e63ac4b12c421be662098eed1
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The KEEP() is only necessary for the exception entry point
as it sits at a magic memory address and isn't referenced by
other code.
Change-Id: I8443e8aa23059b65eaf9c5a1cf3f9b14b04737d5
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This isn't directly referenced by other code in the binary,
it just sits at a magic memory address. Make sure gc-sections
doesn't throw it away.
Change-Id: I1c00a163dbf2eb4866ebadc7f1d70bcc6845b8d1
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
These aren't valid in all circumstances; the reset vector in most cases
needs to be in ROM.
Change-Id: I83df8762eecc53c99af92f3b0972dfbafac457fb
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Fix with a workaround in unnamed unions / structs in bluetooth, i2c,
sensor and uart.
Current documentation parsers (sphinx under Doxygen) don't seem to
understand well unnamed structs / unions. They will not generate any
documentation for any documented members (see left side of
http://imgur.com/mcpBXWc).
A workaround is to make the parser think there is something like a
struct/union/enum name that is actually something with no effect to
the compiler.
Naming it with __unnamed_workaround__ ensures it is clear it is a
workaround while we wait for a final fix. It is #defined to be a NO-OP
to the compiler and rearrange the member documentation as *@param* so
we have some documentation that the non-worked around code fails to
document.
Anonymous structs/union that declare a variable are just given an
internal name.
Workarounds documented in the contribution guidelines.
Change-Id: I4d32cf444f3c5e7d2fb11581e4b41f80e93c9786
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Enables L2CAP protocol definitions for connection request/response and
use it then to start handle incoming PSM connection request to valid
registered local PSM server. SDP PSM got no security restrictions.
The other PSM connections are validated against link encryption and
availability of SSP feature and if not matched are refused with
security error.
Change-Id: I429cf5dbce92300bd52639d5065e0144f8db4d13
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Introduces HCI protocol defines to be able request and read remote LMP
features and if available extended data from peer when connected.
Change-Id: Ic274737d8b6c896eb9e83e2179829bcbadf6f635
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Some macros were inheriting from other macros with minor
differences. They were referring to the description of the
the params from the original macro. However, doxygen does
not recognize that. Replaced with another doxygen command
that actually pulls in the descriptions avoiding the warnings.
Change-Id: I8545a965ee64f7800f54208e330de7b2c7a611eb
Jira: ZEP-460
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Some function *typedefs* confuse the *Sphynx* / *breathe* parser [see
the patch for full details]. Implement a workaround (defining the name
with @typedef), add workaround documentation and file a bug with the
sphinx/breathe developers.
Change-Id: I7f3dba4a53d0cc73e12f02511a5f85526f357b5f
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Sphinx's parser gets all confused; add a workaround using @fn,
document the workaround in the contribution section; bug filed with
Sphinx for a permanent sollution.
Change-Id: I0200add092da27206b9d006bb13110c4cc37d0e4
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
The problem is doxygen's parser is getting confused by constructs as:
static inline __attribute__((always_inline))
void sys_out8(uint8_t data, io_port_t port)
{
_arc_v2_aux_reg_write(port, data);
}
Too many words at the beginning of the function definition. So change
to use the macro ALWAYS_INLINE (which is already defined to mean
'inline __attribute__((always_inline))`.
Kills:
sys_io.h:37: warning: documented symbol `static inline void sys_out8' was not declared or defined.
sys_io.h:47: warning: documented symbol `static inline uint8_t sys_in8' was not declared or defined.
sys_io.h:58: warning: documented symbol `static inline void sys_out16' was not declared or defined.
sys_io.h:68: warning: documented symbol `static inline uint16_t sys_in16' was not declared or defined.
sys_io.h:79: warning: documented symbol `static inline void sys_out32' was not declared or defined.
sys_io.h:89: warning: documented symbol `static inline uint32_t sys_in32' was not declared or defined.
sys_io.h:120: warning: documented symbol `static inline int sys_io_test_bit' was not declared or defined.
sys_io.h:133: warning: documented symbol `static inline int sys_io_test_and_set_bit' was not declared or defined.
sys_io.h:146: warning: documented symbol `static inline int sys_io_test_and_clear_bit' was not declared or defined.
sys_io.h:161: warning: documented symbol `static inline void sys_write8' was not declared or defined.
sys_io.h:171: warning: documented symbol `static inline uint8_t sys_read8' was not declared or defined.
sys_io.h:182: warning: documented symbol `static inline void sys_write16' was not declared or defined.
sys_io.h:192: warning: documented symbol `static inline uint16_t sys_read16' was not declared or defined.
sys_io.h:248: warning: documented symbol `static inline int sys_test_bit' was not declared or defined.
sys_io.h:261: warning: documented symbol `static inline int sys_test_and_set_bit' was not declared or defined.
sys_io.h:274: warning: documented symbol `static inline int sys_test_and_clear_bit' was not declared or defined.
Change-Id: Id10e9b6cd44a370ccc732c17b23fb66bd1845205
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
The parameter is already inside a struct that's specific to BR/EDR
discovery, so there's no need to repeat "discovery" in its name.
Change-Id: Idb95788bfc9d62ecd52adecc35104e212724cb78
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Since we only have a single user we can enforce length > 0x01. We
should also ensure that the results count is 1-255.
Change-Id: Id5d91acae06c6c6fc66dd59c0e367682a98dc08c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This way the application can control the maximum duration of the
Inquiry. The value 0x00 (which is invalid for HCI) is still accepted
for backwards compatibility and gets mapped to the old hard-coded 0x30
value.
Change-Id: Ibc9eb86bbb6c9e45b7b351278517b4a688015195
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Current language is a bit confusing, reword it in a clearer way.
Change-Id: Iaf2d29ab838cf2c5f50d7f2bdb2cdfa83c9a44c7
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This way the APIs don't dangle on their own under the master Bluetooth
group but are nicely behind a subgroup like everything else.
Change-Id: I608b6019e970db86a1bcdb29f0a52ce4a3165fbe
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
These prevent the documentation from being included in the generated
doxygen output.
Change-Id: Iffe38c15055b8283d4b9f16b1c830c9f269ba6e4
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Added sphynx comments required to link C code comments to rst
documentation, additionally a new rest page with the list of
current system log Kconfig options and an example.
Change-Id: I9d1370b5f0a2fbd858de83befb99f0f4c7024a13
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
JIRA: ZEP-153
Introduce the family of nano_fifo_put_list and nano_fifo_put_slist APIs,
which allow queuing a list of elements on a nanokernel fifo in one
shot. When called from an ISR or a fiber, the behaviour is not really
different than calling nano_fifo_put for each element to enqueue.
However, when called from a task, it allows the task to enqueue the full
list without yielding to fibers that were waiting on the fifo.
All fibers currently waiting on the fifo will be awakened and given an
element from the list in their order of priority. When some elements are
not matched with a receiver, they are queued normally.
There are two ways of passing a list: with either an ad-hoc queue, by
passing the head and the tail elements, or with a sys_slist_t object.
For the latter, the object must be reinitialized afterwards.
Change-Id: I6ac077f556dc39995191e9149c4a047a3433826f
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Refactors L2CAP core data structures and modifies functions that uses them.
Now we can have separate L2CAP feature channel objects for LE and BR/EDR
transport. This's also a ground for make L2CAP CoC API to be common
for both transports.
Change-Id: Ic1197b0e3c4f505764b23fb9c7eb27123a44a675
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
We will require 6 variables to be defined by SOC-specific
linker script; these values in turn can be pulled from
defines in layout.h.
To help position code correctly we define two new ELF sections
for this arch, 'reset' and 'exceptions'.
Change-Id: Idffbd53895945b7d0ec0aac281e5bf7c85b4b2c2
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This header was pulled in verbatim from Altera HAL and had
some style and naming issues. The inline functions or macros
which read registers can now be used in expressions.
Change-Id: I7a463717051efd2f9dd36e8a84d357852fbf9215
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This header defines BT_BUF_USER_DATA_MIN which is needed for declaring
buffers passed to BT stack and already includes <net/buf.h>.
Change-Id: I6b556be9fb3939a55af0b73d49fc59152d6d6a53
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
It is no longer necessary to implement flush callback for long
descriptors since the stack can queue prepare writes this callback
will never be called which makes BT_GATT_LONG_DESCRIPTOR obsolete
as well.
Change-Id: Idca31ba8e4404d2acba760c420394d5adee0a508
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Introduce support buffer fragment chains that are linked together.
This is done with the help of a flag while the buffer is inside a FIFO
(indicating that the next fragment follows it in the same FIFO) and
with the help of a "next" pointer while the buffer is outside of a
FIFO.
In order to do proper "marshaling" a new net_buf_put() API needs to be
always used when inserting a buffer into a FIFO. Respectively, the
net_buf_get() and net_buf_get_timeout() functions are extended to
support getting buffers from arbitrary FIFOs and reassemble the
fragment chain based on the flags that the received buffers contain.
The insertion of a fragment chain using net_buf_put() into a FIFO is
done atomically with the help of irq_lock/unlock since FIFOs support
multiple writers, however since there's ever only a single reader per
FIFO similar locking is not necessary there.
Change-Id: I0ec579f63ea8d063f50e3f1f4c2e80ec399622d7
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
With this API it's possible for the caller to force specific behavior
when it comes to waiting (or not waiting) on the FIFO.
Change-Id: Ib66e2f767c26c82abf1ba3b80bd15aec2383542e
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This add CONFIG_BLUETOOTH_DEBUG_LOG which depends on SYS_LOG since the
later can actually use either CONFIG_PRINTK or CONFIG_STDOUT_CONSOLE.
Change-Id: Ib2974d1331f6c91d119a218ec95e8bf01069377b
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
It is now safe to introduce the callback since nano_timer_init now
calls _nano_timeout_init which does takes care of initializing all
the fields properly.
Change-Id: I5735eeebef233a0a541ec8b2a354b65da98082fc
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a delayed version of nano_work API which is useful when
handling timeouts since the same stack/workqueue can be shared.
Change-Id: Iac43796fe96deb0a9c8976c91a65104b57779b00
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
There is no need for struct bt_storage being modified by stack.
Change-Id: I732cf94983a29de40d692e802d6a71b8986708df
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This allows to register callback that will be called to
perform command completion.
Change-Id: Ide7a0427d9b8bb4dd8cfc0995ef2567b32e89632
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Fixed doxygen comments for flash API usage. Clarified the use of
flash_write_protection_set API for write and erase operations.
Jira: ZEP-383
Signed-off-by: Kuo-Lang Tseng <kuo-lang.tseng@intel.com>
Change-Id: I6a323915c63a393b7be8f96fe3fcd9616a9b21d1
In scenarios where device PM is enabled and dynamic irqs are
used, move the irq to vector table to RAM and keep it updated,
so that we can use this to restore IOAPIC/LOAPIC vector entries.
Jira: ZEP-224
Change-Id: I0d4350d4e30f8ca337a2a1d4f012748c3cb450f4
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
For EM Starter Kit, one of the SOC choices has DRAM and no FLASH.
If FLASH_SIZE is 0, the linker command file will create
SRAM, ICCM and DCCM memories (and no FLASH). SRAM is really DRAM.
Also, the linker.ld file is extended to handle microkernel
objects.
linker_harvard.ld has "all rights reserved". added to banner.
Change-Id: Ia433578b94ce91722f3670819f44befafeecf878
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
By default, kernel event logger is using the system timer. But on
some platforms where the timer driver maintains the system timer
cycle accumulator in software, such as ones using the LOAPIC timer,
the system timer behavior leads to timestamp errors. For example,
the timer interrupt is logged with a wrong timestamp since the HW
timer value has been reset (periodic mode) but accumulated value not
updated yet (done later in the ISR).
This patch is adding the possibility to register a timer callback
function that will be used by the kernel event logger. For example,
on Quark SE, this allows using RTC or AON counter which accuracy is
sufficient and behavior more straight forward compared to system
timer.
Change-Id: I754c7557350ef29fc10701e62a35a5425e035f11
Signed-off-by: Fabrice Olivero <fabrice.olivero@intel.com>
This enable checking for errors and automatically print help string:
btshell> connect
connect <address: XX:XX:XX:XX:XX:XX> <address type: (public)>
Change-Id: Ie097ecddb72ab15bf6192e310d0bd839bfd251d5
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a callback to struct _nano_timeout which is called in ISR
context allowing more flexible handling of timeouts.
Change-Id: If837b0b51b24dfffebac6f99f4d66fdf01c164f0
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
IP packet passing through 6lowpan compression and 802.15.4
fragmentation has an issue. (RFC 6282 and 4944) RFC4944, 5.3
says "fragment header's datagram_size and datagram_offset
values as the size and offset of the IPv6 datagram before
compression".
At the moment datagram size and offset values are after
compression. Due to multiple bearer (15.4 and bluetooth) support
and multiple incoming buffers support functionality is divided
to compression and fragmentation parts. And datagram size and
offset values for BT are after compression. Small packet (which
doesn't need fragmentation) doesn't go through this. So cacheing
compressed and uncompressed header lengths and with hdr difference
preparing fragments as per original buffer (total buf size and offset).
Change-Id: I9d3b0433e64964c68519d7c007cc06ec6035b573
Jira: ZEP-208
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This adds a optional help string to the command table which is printed
when user enters > help <command>.
Change-Id: Id3a8995bb6c4ff6b009418e31968c0677e6e4921
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
I've tested that CONFIG_XIP does work with Harvard.
User's can build CONFIG_XIP=y, and then have their bootable image
be placed in SPI-FLASH. A bootloader will load up ICCM contents.
Zephyr will then copy remaining data from ICCM to DCCM.
This takes a bit of ICCM memory to do it, but it will work.
Change-Id: Ic1cd201d19aab9083d63334527d9d68f4edc6075
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Update all drivers that have vectorial data to return all 3 channels (X,
Y and Z) if the chan parameter is _ANY.
Also fix a compile bug in LSM9DS0 MFD driver.
Change-Id: I5bf261846bcd68c288b96997ff164726f75c151c
Signed-off-by: Murtaza Alexandru <alexandru.murtaza@intel.com>
This accidentally snuck by between iterations of the workqueue patches.
In v1 there was a sensor-specific workqueue, which we then turned into a
global one.
Change-Id: I10b193bb535602a16f6742d057281ba01906228d
Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
If application calls net_send(), set the retry count to some
low number (currently 5) so that we do not wait forever but
eventually we try to send the data properly.
Change-Id: I8103246ac9227a0cf70b56aecab6ed8307877e19
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
These are internal functions needed when initiating a TCP
connection.
Change-Id: Ide5d59ac9854ec8bdea3baa97b3cde3ffa6a5e0f
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The function gets 32bit-wide data from net buffer and converts the
value from little endian to host order.
Change-Id: I2d2454951b3ac39686a25454678ce92d8a1a0f3d
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Some ARC CPUs can be built with separate instruction bus
and data bus (i.e. Harvard Architecture). Such systems
have only ICCM and DCCM memories. When CONFIG_HARVARD
is defined, the initial stack pointer is set to the
TOP of the DCCM memory. Currently there is no SOC that
existing in Zephyr tree that sets CONFIG_HARVARD, but
this will be coming soon.
Change-Id: I2016d1f472fbdad683a964aa0b65c5263ecfb6cf
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
The function gets 32bits wide data, converts host order to little
endian and then puts the data on protocol stack to be send.
Change-Id: I29e4040b302a16b551a0922133c327ff694fec5d
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Remove the homegrown sensor delayed work API in favor of using the
system-wide workqueue. Drivers still have the option of using their own
fiber.
In a second step, drivers can be refactored to start and use their own
workqueue.
Change-Id: I70dea6fc2abcbc9e04ac1ed3c837483a3d3c4424
Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
Add a generic API for drivers to start workqueues and submit work
items. This is needed by drivers which need to schedule code that might
sleep from an ISR to run in fiber context.
Also add the option to start a system-wide workqueue.
Both additions are optional. They can be deactivated for systems that
do not need them.
Change-Id: Ia843568fde5daf6d4279ef7bf241c26c1e3dcfb7
Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
Moved comments from code to header.
Jira: ZEP-160
Change-Id: Ifd0f3c930289256e682b5941d77433aca3d3f941
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The stub label is created with ISR and IRQ number since the same
ISR can be used by several IRQs
Change-Id: I0ea909fddbce7a70c754befd095b7a3b36fffab4
Signed-off-by: Fabrice Olivero <fabrice.olivero@intel.com>
Added CONFIG_KERNEL_EVENT_PROFILER_DYNAMIC flag for enabling that
capability. When set, nothing will be logged by default
Change-Id: I03552483e5a6bfd9e2505eda56908f0d0ae98618
Signed-off-by: Fabrice Olivero <fabrice.olivero@intel.com>
The application can return BT_ATT_ERR_AUTHORIZATION on the callback
already so there is no reason to have it as a permission as once set
it always fails.
Change-Id: Ia634e3f313993dd36c06bff48f36d4ddf1264376
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Many drivers need to start fibers whose parameters are based on user
configuration. Make it easier to specify such parameters by creating a
fiber_config structure and a wrapper to use it.
Change-Id: I26917ada71acbc676c0f32b6ee081aff7bb1d6d8
Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
This makes bt_gatt_write similar to bt_gatt_read where the parameters are
stored in a struct which can be used to store intermediate values while
the operation is in progress.
Change-Id: I3c62af137b99985690cf88dcc37a977a0be891f5
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The ARC CPUs have several other features controlled by aux registers.
Specifically, I will be needing ones for i-cache, d-cache and various
BUILD registers that indicate which features are present.
Change-Id: If15a330f4ea5aa519655f88526fbb5f600d7cc0b
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Nios II has no special instructions for testing bits, ffs, etc.
However, when poking memory-mapped peripherals, special *io variants
of ld and st instructions must be used to avoid issues with the
caches.
find_msb_set / find_lsb_set are implemented using universal GCC
compiler built-ins. It's not clear why this approach was not taken
on other arches.
The sys_in/sys_out/sys_io functions are completely removed as there
is no concept of these on Nios II.
sys_read/sys_write functions implemented using special GCC builtins
for the Nios II so that we don't have to use inline assembly.
Rest of the operations implemented in C, there is no requirement that
they be atomic.
Change-Id: Ic251fc7d7f342543dace4ccb3e429937b303215e
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This file is taken verbatim from the Altera Nios II HAL
source and includes various useful processor defines
and macros.
Change-Id: Idbf0b49bebe33bb5a53f5155d927bafadda9a2fe
Origin: nios2.h Altera Nios II HAL
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
BSP builds for Nios II generate a linker.h and system.h which reflects
the configuration for that CPU. This can vary depending on how the CPU
is wired up in QSYS, so it needs to be at the SOC level--we essentially
treat any given CPU configuration as a SOC in Zephyr build terms.
Include these files from <arch/cpu.h>.
Change-Id: I12f76600107fec1a14a2f9cb82b0f55915ec03a6
Origin: Altera Quartus tools, machine generated
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Got lost in the .gitignore when these files had .cmd
extension.
Change-Id: I8a8d51014b621026b739525f3f9a3e8a20cb5ad0
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
ZEP-252 will handle implementation of the code here.
Change-Id: I3e9a6c7cdf2d5a3b0240317b772628fead528095
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
At the moment this just jumps into prep_c, with comments left
on other things that need to be done. Having this here ensures that
the early boot code isn't discarded by gc-sections.
vector_table.c removed, it isn't the right approach for this CPU.
Proper method for initializing reset and exception vectors still
being investigated.
Change-Id: Id7965c671f1a55c42ecfb65119497405a646bec4
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Avoids confusion with .gitignore rules, which were inadequate to
cover all the places where these files are found. At least in
VIM, these files are now syntax highlighted correctly.
Change-Id: I23810b0ed34129320cc2760e19ed1a610afe039e
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Takes advantage of the fact that microkernel tasks can now wait on
nanokernel objects to simplify the device synchronization code.
Change-Id: I5b8d21eaccde9db8b63dd906ef982494a6170271
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds the nanokernel infrastructure to permit microkernel tasks
to block/unblock on nanokernel objects. Multiple tasks may wait
on a nanokernel object's dedicated task wait queue.
It is important to note that when data is posted to the object
all the tasks on that object's dedicated task wait queue may be
woken up but the data is not immediately given to any of the tasks.
This is done to maintain consistent behavior with the nanokernel
as in a nanokernel system, fibers are given preference in both
waiting on and getting data from a nanokernel object.
Change-Id: Ia5c7f21ae59a367d9fec23dafc3a918d9e767db5
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Instead of requiring application to provide both advertising type
and address type used just require app to provide info if advertising
is connectable or not. Advertising type is set based on provided
SCAN_RSP and local privacy support.
When local privacy is enabled it is no longer possible to advertise
using identity address. If such feature is to be required later on
advertising options can be extended.
This gives BT stack full control over what type of address is used
for advertising and is a preparation for random address rotation
and OOB support.
Change-Id: I90e9a683ef3794f155707343c874f75585439325
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This is just a temporary value for now, need to research the best
value to use.
Change-Id: Icaadf75fa3ae98b087f3d51813f85003f398f378
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Basic build framework for Nios2. Everything is stubbed out,
we just want to have a build going so that we can start to
parallelize implementation tasks.
This patch is not intended to be functional, but should be
able to produce a binary for all the nanokernel-based
sanity checks.
Change-Id: I12dd8ca4a2273f7662bee46175822c9bbd99202a
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Of the 3 related functions;
_thread_essential_set()
_thread_essential_clear()
_is_thread_essential()
The first two are parameter-less and always operate on
"_nanokernel.current". The last one takes a 'thread' parameter but will
operate on _nanokernel.current if the parameter is NULL. All calls to
_is_thread_essential() pass NULL!
This change makes the 3 functions consistent by removing the parameter
to the 3rd function. This should also be marginally more efficient,
though consistency was the motivation. This change corrects the doc
preamble to all 3 functions.
(These functions would probably be better as inlines. Also, the choice
of when to use wrappers seems a bit arbitrary. E.g. there's nothing
for setting/testing the "FIBER" flag.)
Change-Id: Ie3589f8a28b227c6d7a3a31b664d3b3e6e9c6d17
Signed-off-by: Geoff Thorpe <geoff.thorpe@nxp.com>
Refer to ATT as error domain expected by GATT API.
Change-Id: I70d45a618191ae859f3b2c33427dbb7262511393
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Callback errors should contain ATT error code not posix errors.
Change-Id: I698fac086ab8b2dca3487ab99ee974b4318d16f7
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Indentation should be with tabs only (these lines were with tab +
spaces).
Change-Id: I8f199b1d6972b02513e4c293636606f481641266
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
To boot zephyr on the Arduino 101 running the original bootloader
which supports DFU, set the following in your application configuration
file:
CONFIG_SS_RESET_VECTOR=0x40034000
CONFIG_PHYS_LOAD_ADDR=0x40010000
CONFIG_VERSION_HEADER=y
Jira: ZEP-219
Change-Id: Ia015a7b6fce888b49ed22c558de992132d4713ea
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
sys_slist_insert can be used to insert a node in the middle of the list
which previously was not possible with sys_slist_append and
sys_slist_prepend.
Change-Id: Ib9e319469cd4911adf7ddf49c54c3f7390c4c953
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
* service include macro definition takes reference to
first service attribute of the included service
Change-Id: Ib2b1defe2c99aea738da791af74a534d56025eae
Signed-off-by: Roger Lendenmann <roger.lendenmann@intel.com>
This no longer defaults to X86 and instead throws an error if a
supported arch isn't found. Output format now checks CONFIG_ARM
instead of Cortex M3, should be the same for all ARM chips.
Change-Id: Ib9bf07ad93a44b3f7cdac7b52432110776eb23fd
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This patch removes DEV_* codes from device.h since they are not used
anymore. All APIs now use error codes from errno.h, following the
conventions from doc/collaboration/code/error_code_conventions.rst.
Change-Id: Ifc363ec8d3d5aa108eaef49d9283b67dcae69ce5
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Documented the Power Management subsystem which includes the
power management hook interface, device power management,
device busy status interfac and other APIs. Also included
is a guide to writing Power Management applications.
This has 2 parts. One is the general description of the
infrastructure and the PMA writing guide which goes in the
'subsystem' area. Other is the API description that gets
automatically pulled in from the comments in the source files.
The API description goes into the section where all other
Zephyr APIs are put.
Change-Id: Id630209b23f931a8fcccb6f59428610298486743
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Rename sensor_value_type enums from SENSOR_TYPE_* to more concludent
name SENSOR_VALUE_TYPE_*. This change is required if we want to
introduce SENSOR_TYPE_* (SENSOR_TYPE_ACCEL - if the sensor/driver
supports accelerometer, SENSOR_TYPE_MAGN - etc.) in the future.
Also it is more clear with this notation what these enums are referring
to.
Change-Id: Ic58e29288669e10c0695e0f86f59b0e57f7ac38c
Signed-off-by: Murtaza Alexandru <alexandru.murtaza@intel.com>
Now you can specify the sensor type you want to fetch using
sensor_sample_fetch_chan. This will inform the driver that you want only
one type of data updated, leaving the others unchanged and enabling
different sampling rates for multi function devices (MFDs).
Change-Id: I403e422dffadc697c19a5372ed55ed8f486a2607
Signed-off-by: Murtaza Alexandru <alexandru.murtaza@intel.com>
Swap order of mask and value parameters from i2c_reg_update_byte
function. This is needed make refactoring of sensor drivers that
would use this function easier, since all the register update
functions written for each driver have the mask before the value
in the parameter list.
Change-Id: I7bef7be73e904fca353a492ab9edd2a210df199e
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
Enables API to register PSM server on BREDR transport.
Adds l2cap_br.c file responsible for BREDR specific functionality to
build path based on Kconfig selection.
Change-Id: I92823b0207ab0da96bfb813353de9f95fa5dd0f4
Origin: Original
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Remove hardcoding and make the values configurable. Also make the
Kconfig variables consistent with other architectures.
Change-Id: I69334002303d4d8abaf7363d9134fd5f46ce4eeb
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The device address must be given before the register address in the
parameter list of the i2c_reg_read_byte function.
Change-Id: I92afbbf83f76eeb58ec41a2a8c83dd909b78a23a
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
If one use the old gpio_set_callback() function,
the build will generate deprecation warnings.
Change-Id: I3f008ab3fc46e1b38cb433340d2f97671d04906e
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Indenting away the function pointer name from the return type is not
consistent with the rest of the code base.
Change-Id: I8bd69ccfd201fa3c9eedb13caeff920774d1defd
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
User can enable TCP server (listening socket) support in the
IP stack. This commit does not yet have TCP client (connecting
socket) support.
Change-Id: I75dd02a81addc1d1e026463b53631d56378157df
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Many sub-systems might require to set a callback on different pins.
Thus enabling it via changing the API.
It is also possible to retrieve private-data in the callback handler
using CONTAINER_OF() macro (include/misc/util.h).
Former API is still available, and is emulated through the new one.
Using both should not be a problem as it's using new API calls.
However, it's now better to start using the new API.
Change-Id: Id16594202905976cc524775d1cd3592b54a84514
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Certain Low power SOC states (e.g. deep sleep) will result in device
IP blocks losing state. In such a scenario it can be useful to have
a mechanism for devices (driver code) to signal the power manager /
policy that they are in the middle of a transaction.
We expect the device driver code to make a call to
device_busy_set(device *) before initiating a transaction and
device_busy_clear(device *) on completion. It is expected that device
driver developers will add this as necessary in their drivers.
Further an API is provided for power manager application / policy to
check this. Based on this the power manager / policy can decide
whether or not to go into a particular power state.
Change-Id: I0fedd90b98e182cd41b53c7f9e08655532822faa
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Add API for reading, writing and updating internal registers of I2C
devices. This API is meant to be used as a simpler way of communicating
with I2C devices that have 8-bit internal registers.
Change-Id: I7280eb530039aa10ad9cc19c1c309c7a2f473eb4
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
This is more of a convenience to let the driver identify itself in
debug logs and the monitor protocol.
Change-Id: I73351477e98d45d6344c180b8088bde29df6f7d9
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The bus that we notify over the monitor protocol is really driver
specific, so let each driver specify their bus type.
Change-Id: Ic3a086fcc06352dbf051e52cef5bf6b8696349ae
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
With most boards there's no simple way to get access to the HCI
traffic. Simultaneously these boards only have one external UART for
the console. This patch introduces a protocol which combines both
normal logs and HCI logs over a single binary protocol sent over the
console UART.
The protocol is modeled based on the btsnoop/monitor protocols used by
BlueZ, and the first tool that's able to decode this is btmon from
BlueZ ("btmon --tty <tty>").
For platforms with two or more external UARTs it is still possible to
use CONFIG_UART_CONSOLE as long as the UART devices used are
different, however on platforms with a single external UART
UART_CONSOLE should be disabled if BLUETOOTH_DEBUG_MONITOR is enabled
(in this case printk/printf get encoded to the monitor protocol).
Origin: Original
Change-Id: I9d3997c7a06fe48e7decb212b2ac9bd8b8f9b74c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Use SOC_SERIES_* for naming SoCs with similar features and architectures
with the goal of code reuse. The Series in the config variable should avoid
name collisions and clearly denote the relationships within an SoC family.
Change-Id: I7a98542f96b5d5dc3acc23782c4d45f98cceb599
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This way when BLUETOOTH_DEBUG has been disabled we don't need to make
extra #ifdefs in application code to make it build without debug
support.
Change-Id: Iceabe0d700d571afae8b85c2c559ba372a883682
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add ip_buf_ref() helper that helps to track the calls to
net_buf refcounting in IP stack.
Change-Id: Ie5f5a5d57b6ffcb20df4fbc9f25c6c73a99589df
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The GDB server implements a set of GDB commands, such as read/write
memory, read/write registers, connect/detach, breakpoints, single-step,
continue. It is not OS-aware, and thus provides a 'system-level'
debugging environment, where the system stops when debugging (such as
handling a breakpoint or single-stepping).
It currently only works over a serial line, taking over the
uart_console. If target code prints over the console, the GDB server
intecepts them and does not send the characters directly over the serial
line, but rather wraps them in a packet handled by the GDB client.
Change-Id: Ic4b82e81b5a575831c01af7b476767234fbf74f7
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Introduce an x86 interrupt stack frame that contains more information
than the non-debug one, namely the caller-saved GPRs, as well as an API
to retrieve it. Able to handle nested interrupts stack frames.
Change-Id: If182aaa2f34e4714b16ca65ff79da63b72d962f7
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
A debug server might want to redirect outgoing characters on the console
to another output if it piggybacks on the serial line normally reserved
for the console.
Change-Id: I534f5b35456306940a3926f52fe5cce2d5c94da4
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
DEV_* error codes are being deprecated so hide them from
public documentation, to prevent mis-use.
Change-Id: Iee2f59502c9470c14ddf2fb1ed19b3526609e43b
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Doxygen complained about "Unsupported xml/html tag <user> found".
Make the correct indentation to signify a code block, since it is
indeed a code block. This gets rid of the warning.
Change-Id: I78ea7709f1d45b2ff48c86153151d4f71a41d1e3
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Doxygen complained about @defgroup not closing. Fix it by moving
code around, as doxygen was confused by all the #ifdef-#endif.
Change-Id: Iacc2e983cc82b0dfcaaea423ff64bdcc4db8577f
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The @file tag should follow by a file (or nothing for current file),
instead of file description. Fix it by separating the description.
Change-Id: I1944b164ebe420fbdc03fc65b314ac53493a5d2c
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The @file tag should follow by a file (or nothing for current file),
instead of file description. Fix it by separating the description.
Change-Id: Iabe3550568cdfdda6ad71be6fab3e8b5dfbeb940
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Use \p to refer to parameters instead of using "@" which
doxygen complains.
Change-Id: I0e8384084497f422ea635caf656ae4a8b06fde94
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The param "pwm" is not in the argument list of pwm_all_set_phase().
So remove it.
Change-Id: I960b5b42de33edc4a6216fb5a65e0f1352bd637d
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds the DEVICE_AND_API_INIT() macro to take in a parameter
to assign to device->driver_api. This eliminates the need to
assign to driver_api during runtime device initialization.
This provides an alternative way to declare devices. This should
save a few bytes in ROM for those devices that will never fail
initialization (in other words, never need to manipulate
driver_api pointer at all).
Also clean up the documentation a bit to remove duplicated
block of information.
Change-Id: I6abed1abe75db2e8babfcf1ecf590491132a5543
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Adds the missing @ingroup for counter API so it appears
under device driver category.
Change-Id: I763faab802d3a6453ab46ee969b5ffd082282f1d
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
We have not found any use-cases for dynamic IRQs where a static
IRQ did not also suffice. Deprecate so that we can eventually
remove from Zephyr and nontrivially decrease the complexity of
the kernel.
Change-Id: I509655371773aeaca7d01134dd850eb4cd95f387
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This mechanism does not add enough value to the kernel to be worth
maintaining it. Drivers that need deferred processing of interrupts
can simply define their own task and have the interrupt handler
release an event that the task waits on.
The API is marked as deprecated and it is removed from unit test
coverage as well as the documentation.
Change-Id: Ib87b91cb41e9b6d7fdf0dc62b240a531b6a8889f
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
If incoming pairing request would result in JustWorks pairing this
can be used to request consent from user for accepting it.
Change-Id: If0695d0e1bb010bade6a16abe1b57a2ce07856cc
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
The device_get_binding() no longer returns pointers
to device struct when driver_api is NULL. Therefore,
there is no need to check for driver_api being NULL
in the serial driver wrapper functions.
Change-Id: I018a409324d7c1ae83c699a3ebf30f2f2abfb3b3
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Fixes a problem where the nanokernel FIFO state information could get
out of sync due to a timeout.
The nanokernel FIFO structure nano_fifo now maintains two separate
queues: one for waiting fibers and the other for posted data. This
permits the safe and independent querying of the queues as needed
when getting and/or putting data from/on the nanokernel FIFO.
Change-Id: Ifbcb5004558b06fc55cad2a955f5be20e716b392
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Now that the incoming ACL & HCI event pools can be defined externally
to hci_core.c there should be convenience macros to know what's the
minimum required buffer size for these pools.
Change-Id: I6f2a7322a3d77e1304e9d925767a1fd3471c76c7
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
So far the assumption has been that the host stack manages all
incoming and outgoing buffers. For the incoming buffers (from the
controller) this has required hci_core.c to manage its own pools and
do the host flow control. This setup makes perfect sense for an
architecture where the controller resides remotely on a different CPU
& address space (i.e. the "traditional" HCI transport case).
When the stack runs on a system where the controller resides in the
same address space this setup doesn't work that well. In such a
scenario the incoming buffers are ideally created as low down in the
stack as possible (i.e. below HCI), which means that the current
hci_core.c cannot be responsible for managing their pools.
To allow for both types of architectures this patch introduces a new
BLUETOOTH_HOST_BUFFERS Kconfig option that can be selected to say that
host-side management is desired, or deselected to say that the
controller (residing in the same address space) takes care of managing
the incoming buffers.
So far the incoming buffer types were identified by hci_core.c by
looking at their "free pool" pointers, however as soon as the pools
are allowed to be somewhere else this doesn't work. To solve this we
now require a minimum user data size for all Bluetooth buffers and use
that to store the buffer type.
Change-Id: I14bc32007e3e3f17c654f71f79b520650028d7ce
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This is a complete new cc2520 driver for zephyr. Intention is to fit
better within Zephyr device driver model.
- It's (almost*) ready to be instanciated as many times as necessary
- It's fully interrupt based on SFD and FIFOP (no pin polling)
- It's nicer to other sub-systems (it sleeps, no busy-wait loop)
- It still loosely complies to old legacy radio device driver model
*: GPIO API needs to be fixed in order to accept multiple callbacks, as
well as enabling callbacks to retrieve private data.
Notes:
- Hardware filtering does not work yet as the net stack, above, needs to
provide the relevant information for it (src/dst ieee802154 extended
addresses, short addresses...)
- A embryo of generic functions (txpower, channel, addresses...)
have been implemented but don't belong yet to any radio device driver
model. Such new driver model will come afterwards (soon?)
- SPI API would need to be improved to avoid as much as possible memcpy
as well as spi_slave_select() call.
Change-Id: I1fd6dfff28fba3984f6006d394ea12f1e763ac18
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
ieee802154 is a more relevant name. Applying the change in
include/drivers as well.
Change-Id: I7f7188ed0421045d7667303c375eeb8af1298b97
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
As for SECONDS() and MSEC, now sys_clock.h provides a USEC() macro.
Change-Id: I43e8b132d2deeb862d8cfda1f785115f339d6ddb
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Keep a single bt_storage_* name space for current and future storage
APIs.
Change-Id: If158eb7408cce7c06cd8f98d78a061b9f9585265
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In many cases when we want to access the 'val' member of bt_addr_le_t
it's in situations where the type needed is actually bt_addr_t. To
avoid unnecessary typecasts in these places simply embed bt_addr_t
inside bt_addr_le_t.
Change-Id: I7eecf129bee1dcf085abc83ec2f32e1a10b0b5aa
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add initial support for the Privacy Feature, including the ability to
manage a local IRK and to use Resolvable Random Addresses.
Change-Id: I1c70aea67078dd2a5d07f3b797c37746ebe9ab61
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add initial skeleton for the persistent storage API.
Change-Id: I7a6cc283aa88e7d861af18a6f0db2ed8c71e44a0
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Since sensors' API uses SI units, all attributes and channel reading use
SI units. Hence, conversions from other units to SI are necessary.
This patch adds helper for converting:
* m/s^2 to Gs (and vice versa);
* degrees to radians (and vice versa);
Change-Id: I49f8763bed253ff6bde4c97618766b05f97da699
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
This patch as following attributes:
* SENSOR_ATTR_OFFSET: for setting offsets in order to adjust the read
values;
* SENSOR_ATTR_CALIB_TARGET: for setting target that the chip internal
algorithms need to converge to when calibrating;
Change-Id: I3aae5aa06bcd1376423e58b0511267ea43038718
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
The shorter form "param" is used elsewhere and this helps avoid overly
long lines.
Change-Id: Ie76497b5bf30e72099d13a26db9cacb8cd2c9c79
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The commands array is not expected to change and can be declared
const. This allows callers to cleanly declare their commands lists as
const, effectively moving the structures from SRAM to code section.
Change-Id: Ie1710622b8cfa609e129eb79712f910f1d1aace3
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
As for double linked list provided through misc/dlist.h, this provides a
generic API for single linked list in misc/slist.h. It follows the same
naming rule as in dlist.h
Change-Id: I955bd16a201bc9987c29f5a9e3e3d8447682a71e
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It wasn't correct to add the size of the long jump instruction
as it *replaces* a short jump instead of just being after it.
So redefine this to be the difference in size between these
two instructions.
Change-Id: I65be2afab19d9cd8b096551acde0156f0503df87
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
ARC CPU has stack checking feature that allows to trigger an exception
whenever the stack is incorrectly accessed.
This patch implements the stack_top and stack_base register updates on
context switches, and activates the Stack Checking bit of STATUS32
register when the CPU is in the context of a fiber or task.
As GCC accesses the non-yet allocated stack with frame pointer enabled,
this patch also add the omit-frame-pointer gcc flag in order to work
properly.
Change-Id: Ia9e224085a03bd29d682fb8f51f8e712f2ccb556
Signed-off-by: Alexandre d'Alton <alexandre.dalton@intel.com>
Added device power management hook infrastructure. Added
DEVICE_INIT_PM and SYS_INIT_PM macros that creates device
structures with the supplied device_ops structure containing
the hooks.
Added example support in gpio_dw driver. Updated the sample
app and tested using LPS and Device Suspend Only policies.
Change-Id: I2fe347f8d8fd1041d8318e02738990deb8c5d68e
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Changed names of Kconfig flags, variables, functions, files and
return codes consistent with names used in the RFC. Updated
relevant comments to match the changes.
Origin: Original
Change-Id: Ie7941032d7ad7af61fc02928f74538745e7966e8
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
API definition sys_k_event_logger_get_wait_timeout on public header
kernel_event_logger.h was passing the reference to logger struct on third
position instead of first, on sys_event_logger_get_wait_timeout call.
Resulting on error when API definition is followed.
Jira: ZEP-86
Change-Id: Ia54cd5ffe28a1fab7873bb49bd7452313ab92a02
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
Add support for task_sleep() and fiber_sleep() during the
system initialization. When CONFIG_NANO_TIMEOUTS defined,
before the k_server() starts, kernel uses nanokernel
system clock announce and task sleep functionality.
To give device drivers early sleep functionality, the system
clock has to start on SECONDARY initialization level, same
as most of the drivers.
Change-Id: Ie1d391945cd1cfb9a5dc199783c2d224eb1b0ef3
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
This allows to start (general or limited) BR/EDR discovery. Inquiry
is active until explicitly disabled by application. This is to keep
BR/EDR discovery API similar to LE scan API.
< HCI Command: Inquiry (0x01|0x0001) plen 5
Access code: 0x9e8b33 (General Inquiry)
Length: 61.44s (0x30)
Num responses: 0
> HCI Event: Command Status (0x0f) plen 4
Inquiry (0x01|0x0001) ncmd 1
Status: Success (0x00)
> HCI Event: Inquiry Complete (0x01) plen 1
Status: Success (0x00)
Change-Id: I946fbd881e6d0460be28a9975acd564ae32896e8
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
If the sys log prints already have newline character, then the
syslog macros add another one. User can prevent this by defining
SYS_LOG_NO_NEWLINE before including the sys_log.h
Change-Id: I8aecd856dca8009035dd44f300846492763e57b3
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Such helper is useful to generate a complete bit mask from a given
number. For instance BIT_MASK(2) will output 0x03, or BIT_MASK(8) will
output 0xFF
Change-Id: I406de767d839b7b2d37024b7b41679edddabe551
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Counter API and drivers were merged without fixing the new returning
error convention (errno.h codes). This patch fixes all occurrences of
DEV_* codes so -E* codes are used instead.
Change-Id: I85007e8565686b52121410badea547ed904460a0
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This patch adds a comment to DEV_* codes definition to inform that these
codes are deprecated and we should use codes from errno.h instead.
Change-Id: Ia01b83035db5526b2da56ad4a06b2ebab85b0d55
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
For now as local host works as pairing acceptor, the pairing context
flag is set when remote IO Capabilities is received.
Reply to the request uses remote's authentication requirement
cross-checked against predefined authentication methods that are based
on local and remote IO capabilities.
> HCI Event: IO Capability Response (0x32) plen 9
Address: 00:1A:7D:DA:71:13 (cyber-blue(HK)Ltd)
IO capability: NoInputNoOutput (0x03)
OOB data: Authentication data not present (0x00)
Authentication: No Bonding - MITM not required (0x00)
> HCI Event: IO Capability Request (0x31) plen 6
Address: 00:1A:7D:DA:71:13 (cyber-blue(HK)Ltd)
< HCI Command: IO Capability Request Reply (0x01|0x002b) plen 9
Address: 00:1A:7D:DA:71:13 (cyber-blue(HK)Ltd)
IO capability: DisplayYesNo (0x01)
OOB data: Authentication data not present (0x00)
Authentication: No Bonding - MITM not required (0x00)
> HCI Event: Command Complete (0x0e) plen 10
IO Capability Request Reply (0x01|0x002b) ncmd 1
Status: Success (0x00)
Address: 00:1A:7D:DA:71:13 (cyber-blue(HK)Ltd)
Change-Id: I0f95a58178618f06de16cce0e9d9cf6c85209677
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
According Core Spec 4.2 [Vol 2 Part E, 7.7.41], remote authentication
and IO capability requirements have defined valid ranges.
Change-Id: I0f7cfb79097abbf96b3fee79a757431b6beef665
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Extended Inquiry Result Event shall always have one report so there is
no need to iterate over array.
Change-Id: Id6c550074395666b36d4dc6b956c9e4ae4154938
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Add enum value for full-scale attribute, so we can implement runtime
alteration if needed.
Change-Id: Ib71b4cac6e8841e3f082c07ee75939d1c51209b4
Signed-off-by: Murtaza Alexandru <alexandru.murtaza@intel.com>
The header sys_log.h concentrates logging macro definitions so it can be
reused by all code, change aims create an API to replace replace
currently duplicated logging macro definitions. Later enhancements to
log can now be performed in a single file. Features:
* Optional printing of colored messages
* Incremental log levels per-module
* Optional printing of logging level label (info, error, warning, debug)
* Caller function name printing
* One point log disable
* Global override log level
* Print function detection (printf or printk)
JIRA item ZEP-111 refers to this change.
Origin: Original
Change-Id: I34492b0148b4e9d0094f69c511b96f4fd640ef44
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
The helper for analyzing (fiber) stack usage is in no way specific to
Bluetooth and will likely be of use to many other places as well. Move
it therefore to include/misc.
Change-Id: Iedb699dbe248aca305e387998d37bb339cfb0e21
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The slope threshold and duration attributes can be used to
configure the any-motion (slope) interrupt for sensors that
support it.
Change-Id: Ib09ef276cfd3dda5c94bce13bcf4c6c5436c1e4c
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
Add the public API for counter devices and the drivers infrastructure.
Origin: Original
Change-Id: If100fbc9b3d119ce2be6c131bd64dbeb4fe346f2
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Add enum values that are common for magnetometer sensors (vectorial
components).
Also add oversampling factor attribute.
Change-Id: Ic193c1ad14af301047e652ac63b4480c1b1154bc
Signed-off-by: Murtaza Alexandru <alexandru.murtaza@intel.com>
This patch fixes the remaining APIs documentation which have reference
to DEV_* codes.
Change-Id: I26dd971a4b5e492ce026892f6262b84f7bde6296
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This patch replaces all occurences of the macro DEV_INVALID_OP by
-ENOTSUP at the driver level. So this patch touch the files under
drivers/, include/ and samples/drivers/ when applicable.
This patch is part of the effort to transition from DEV_* codes to
errno.h codes.
Change-Id: I46aec3c65963018c479b01602e4a3eec8650eaff
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This patch replaces all occurences of the macro DEV_OK by the actual
value 0 at the driver level. So this patch touch the files under
drivers/, include/ and samples/drivers/.
This patch is part of the effort to transition from DEV_* codes to
errno.h codes.
Change-Id: I69980ecb9755f2fb026de5668ae9c21a4ae62d1e
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This patch redefines DEV_* error codes in terms of errno.h codes.
Change-Id: Iab994c40265c294296491d427f65c38abd48b795
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
All driver APIs (i2c, spi, gpio, etc.) return 'int' type, but pinmux
APIs. So this patch changes the returning type from 'uint32_t' to
'int' from include/pinmux.h and fixes all pinmux drivers according.
Besides keeping consistency between all drivers APIs, this patch is
also applicable for the errno.h code transition. Pinmux drivers will
return negative errno.h codes so returning 'int' is more suitable
than 'uint32_t'.
Change-Id: I2a6e92d567a0e21fec363226da6197df94657d4b
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
The patch adds a driver for STM32F10x series RCC (Reset and Clock
Control) subsystem.
The module is primarily responsible for setting up of MCU's clock
tree. In particular the driver sets up SYSCLK, PLL (with source
configuration), AHB prescaler, and APB1/APB2 prescalers. As part of this
functionality, the subsystem can enable/disable clock signal for
particular peripherals, thus reducing the power consumption of the MCU.
The driver implements clock control driver API. However, subsystem IDs
being HW specific are exposed in driver public header that must be
included by callers. The driver registers a single device using a common
name STM32_CLOCK_CONTROL_NAME. The device is initialized at
the PRIMARY level with priority 1. This allows the initialization to
take place right after SoC initialization routine.
The driver depends on selection of SOC_STM32F1X config option and is MCU
specific.
Change-Id: I8bea5db20726a24bce7b7ffe0b95de543240429a
Origin: Original
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
Extend the public API of clock_control driver with a function for
querying of clock rate driving given peripheral. This is useful when the
driver must calculate or configurae values that depend on the rate of
clock driving this subsystem.
A baud rate setting of UART port is an example of such operation. To
configure a particular baud rate the driver may need to set the internal
counters of UART port, where the actual value will depend on the clock
rate for this peripheral.
The implementation returns DEV_NO_SUPPORT for clock_control drivers that
do not implement such functionality.
Change-Id: I4e7ec96cd3678a4bb1ff289b0247488289310f2d
Origin: Original
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
When using the CSMA MAC driver, a new packet can be queued before
all the fragments of the previous one were sent. The transmit_packet_list()
function will start sending the old fragments with the new net_buf context.
Keep a per-context neighbor_list to avoid that
Change-Id: I9d41a923c48f597cc95a8f8c9f67884c5caac02c
Signed-off-by: Vlad Lungu <vlad.lungu@windriver.com>
Sensor drivers expose one or more channels, corresponding to each
individual quantity they can measure. Such quantities may be different
altogether (e.g. temperature and pressure) or different axes for the
same unit (e.g. three axes of acceleration). Before reading channels, a
driver must be explicitly instructed to obtain a sample from the device.
This helps accommodate sensors which can only read all channels at once,
and also helps ensure coherence of measurements and optimize I2C/SPI
traffic.
Channels can be read as floating point values or struct sensor_value.
The latter consists of a pair of integers and a type field which
dictates how to interpret said integers. The most common type is INT
(where the second value is ignored) or INT_PLUS_MICRO, which means the
second value should be multiplied by 1.0e-6 and added to the first.
A sensor driver may support one or more triggers, corresponding to
interrupts or timers. Registering for a trigger involves supplying the
driver with a callback which is called when a condition is reached.
Examples of trigger types are: data ready, timer expiration, any-motion,
near/far.
Finally, sensors support attributes such as sample frequency,
measurement accuracy or threshold values for triggers. However, runtime
configuration is discouraged, in the interest of keeping code simple.
Origin: Original
Change-Id: Id290fe544b6f7eccc4b109f3912fca1692e55623
Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
This allows to create outgoing BR/EDR connection and cancel pending
connection before it succeed.
Change-Id: I5c08bb2e89f79c09fa7930f860d6080d902186a1
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
When user creates a socket using net_context_get(), the function
requires local endpoint IP address. This should not be a NULL
pointer because the storage for that IP address was statically
allocated inside the function. Because of this the user needs
to allocate the storage for this and pass that local IP address
to the function. The net_context_get() will fill that local
address to sane value if user passes ANY address (== all bytes
are zeroes) to it.
Change-Id: I88314957f07912d9ecbe517a2402822401d81bd9
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The nmi_on_reset.S functions are used by all ARM platforms. It
makes no sense to repeat the same code for all platforms. Moving
the code from each SOC implementation to arch/arm/core.
The same treatment for the NMI_INIT() macro. Moving it from a per
SOC implementation to the include/arch/arm/cortex_m/nmi.h.
Change-Id: I574d8880a44046cc7b9e1b635e80d6e83657b8c1
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Microkernel timers are defined at compile time as a static list
but they are allocated dynamically in kernel execution.
The object tracing list will only list those timers that are
currently allocated at debug time. For this reason, timers
can be removed from the tracing list at any time.
A very simple double linked list was implemented to reduce the
complexity of the action to remove an item from the list from O(n)
to O(1) and simplify the remove implementation.
Change-Id: Ib7ea718b52e7c719a32b3fa4ff1d7e6b00482c28
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
This reverts commit 0d50329105.
This breaks sanitychecks in CI. The early_sleep kernel test case is failing
randomly.
Change-Id: I015f20699c052b4089076699fc0180945c4d3d16
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Exposes the CONFIG_THREAD_MONITOR functionality as part of the
object tracing header.
Change-Id: I2022a580df2cf33e543b980dc9c33b9adca3d3bf
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
Restructure the kernel's object tracing implementation
to provide a public API that allows debug tools to use
the debug hooks easier and allows kernel developers
to extend the kernel's object tracing scope and include
new kernel objects easier.
The API provides the trace list abstraction to keep track
of different types of kernel objects. The API contains
a simple single-linked list implementation that allows
to save space and simplifies the access to the data for
debug tools such as gdb.
Change-Id: Ic4d393d584576f67f2c5b706e61bae08869debba
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
Now that the internal libc has the off_t type it's the natural choice
for the offset parameters in the flash API.
Change-Id: I69999999625b46634f6d3008fe1b3f82c17d357c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This makes the ordering consistent e.g. with SPI, Bluetooth and
Networking APIs. This also follows the order of parameters in the
POSIX read/write APIs.
Change-Id: I4f11c8c90ccadf176d79f6a7bbd98aac61c26cf5
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
size_t is the natural type for any integer that describes a number of
bytes. For the actual data use void pointers to avoid callers having
to do explicit typecasts if the data doesn't originate in a uint8_t
array. Also use a const pointer for writing to avoid typecasts for
data that originates in a const location.
Change-Id: Idbfc14b2d61ca6189411b211c3727f857dbd4059
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Specifying HEAP_SIZE keyword in an app's MDEF file, results in
creating a new memory pool, which can be accessed using the
task_malloc() and task_free() APIs, which have the usual malloc/free
like semantics.
Expected format in MDEF file
HEAP_SIZE <value>
Change-Id: I0569cffeecf8a2c23c20c7b359256123ece91982
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Add support for task_sleep() and fiber_sleep() during the
system initialization. When CONFIG_NANO_TIMEOUTS defined,
before the k_server() starts, kernel uses nanokernel
system clock announce and task sleep functionality.
To give device drivers early sleep functionality, the system
clock has to start on SECONDARY initialization level, same
as most of the drivers.
Change-Id: I5b3cf3da4c8d8398a966e901ab211f2fcee18dd6
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Support for Freescale/NXP K64 SPI modules, limited to:
- Master mode
- A single active set of clock and transfer attributes (CTAR0), which
includes non-adjustable delay parameters
- Tx FIFO fill and Rx FIFO drain interrupt handling
- Standard, continuous select and continuous SCK SPI transfer formats
Also, divide-by-zero code generation in this driver is prevented.
The 'volatile' attribute is added to some of the variables in the baud
rate and delay calculation functions of the K64 SPI driver in order to
prevent bad code generation by gcc toolchains for ARM seen when an
optimization setting above -O0 is used.
Specifically, a register is loaded with the constant 0 and is used as
the divisor in a following divide instruction, resulting in a
divide-by-zero exception.
This issue has been seen with gcc versions 4.8.1 (the VxWorks toolchain)
and 5.2.0 (the Zephyr SDK toolchain).
Change-Id: Ib5b2b748aad8fdfd5e8d40544e6e1abef3713abe
Signed-off-by: Jeff Blais <jeff.blais@windriver.com>
Phase describes number of clock ticks of delay before the start of the
pulse.
Change-Id: I8e2f5fde423edff09cd5a4a298d911cb7d3cc126
Work-by: Mike Hirst <michael.hirst@windriver.com>
Signed-off-by: Jeff Blais <jeff.blais@windriver.com>
Reorganizes mostly by using preprocessor (indirectly Kconfig options)
strictly LE-SMP related interfaces and security interfaces shared
between LE and BREDR connections.
Change-Id: I90daa36d72403cd5b73e6791714fcaf7f1fbe8e5
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
The pinmux API was modified to expand the meaning of the 'func' argument
to allow it to represent more than a pre-configured function. This was done
to reasonably accommodate a larger range of pin configuration options
offered by other MCUs, such as the Freescale K64 (up to 8 pin functions,
plus interrupt, pullup/down, drive strength, open-drain, slew rate, etc.).
This allows bit fields to be used to define various settings.
Change-Id: I2b216b822c6bae7133eed01c8c3339bb47b6c5db
Signed-off-by: Jeff Blais <jeff.blais@windriver.com>
ipm_send_t properly had 'const void *' for the data payload, but
not the ipm_send() API.
Change-Id: I62a424d37bc17f5bc3646c71d3ff3b029f52cbcc
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
bt_auth_cancel can be used to cancel any type of pairing.
Change-Id: Ia1a6ba834186ab6d5082d3eb473319c2d70cf4a7
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This function doesn't return number of bytes sent but error code.
Change-Id: Ife5e4d3957226ce2b4283b5d229095db2ac375dc
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This documents more in detail the behavior of the API, what callbacks are
involved and when they are called, etc.
Change-Id: I62994ed09a9e8b3f14dc3f8c792469a93aeefabc
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This uses ATT Indicate Value command to indicate changes and wait for
confirmation response.
Change-Id: I123a00e374929d779f96a02440215c32c0e79423
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The peripherals utilizing UART were required to register their own
ISR rountines. This means that all those peripherals drivers need
to know which IRQ line is attached to a UART controller, and all
the other config values required to register a ISR. This causes
scalibility issue as every board and peripherals have to define
those values.
Another reason for this patch is to support virtual serial ports.
Virtual serial ports do not have physical interrupt lines to
attach, and thus would not work.
This patch adds a simple callback mechanism, which calls a function
when UART interrupts are triggered. The low level plumbing still needs
to be done by the peripheral drivers, as these drivers may need to
access low level capability of UART to function correctly. This simply
moves the interrupt setup into the UART drivers themselves. By doing
this, the peripheral drivers do not need to know all the config values
to properly setup the interrupts and attaching the ISR. One drawback
is that this adds to the interrupt latency.
Note that this patch breaks backward compatibility in terms of
setting up interrupt for UART controller. How to use UART is still
the same.
This also addresses the following issues:
() UART driver for Atmel SAM3 currently does not support interrupts.
So remove the code from vector table. This will be updated when
there is interrupt support for the driver.
() Corrected some config options for Stellaris UART driver.
This was tested with samples/shell on Arduino 101, and on QEMU
(Cortex-M3 and x86).
Origin: original code
Change-Id: Ib4593d8ccd711f4e97d388c7293205d213be1aec
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
There's no reason to require callers to cast their data to uint8_t *
when the data might e.g. originate in a packed struct or some other
data type. Instead, be nice to callers and let them use any pointer
they want. Additionally, declare the TX buffer as a const pointer so
unnecessary typecasts aren't needed for that either (if the data
originates in a const location).
Change-Id: I1482ca4e350b5a7fbda6871ed9f54f255af3aa9e
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
These were not actually used anywhere and weren't correct (at least
not the READ variant which assumed the architecture can always deal
with unaligned access).
Change-Id: If2bee24dc729683c839bb631d411eab73498adad
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Provide a helper to perform safe unaligned writes to data.
Change-Id: I00edde580d2ef93daaf7825d333d38fc10f854ac
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Use of these is the mark of a deranged imagination.
Change-Id: Ib4b5f78cf61c016e333288090b397e9a3e0b8a40
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
These are guaranteed to work for bitfields that are
larger then 32 bits wide.
Change-Id: I39a641f08a255478fae583947bced762950d12ff
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The app-facing interface for configuring interrupts was never
formally defined, instead it was defined separately for each arch
in their respective arch-specific header files. Occasionally these
would go out of sync.
Now there is a single irq.h header which defines this interface.
To avoid runtime overhead, these map to _arch_* implementations of
each that must be defined in headers pulled in by arch/cpu.h.
Change-Id: I69afbeff31fd07f981b5b291f3c427296b00a4ef
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Adds values to be validated during examining Secure Simple Pairing exchange IO
capabilities and bond types.
Change-Id: I3f25fa863b9a8a46c0a0e3c366e8b915c7db0bc7
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Adds HCI protocol type for Secure Simple Pair Complete event and enables the
event in controller.
Then implements the initial SSP Complete event handler with catching
the status of SSP process.
Change-Id: Ic7cc5b4cab8a1b4120285815c24eeb6483d748df
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Enables IO Capability Request event in controller.
Adds handler to react on controller's IO Capability Request event during
incoming pairing.
As a initial case respond to the request with negative reply setting
reason as 'pairing not allowed'.
Change-Id: I161c7ab7f1031a78cfa50444f41624232e5c5146
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Enables IO Capability Response event in controller and adds remote IO Capability
and authentication fields to connection object.
Initializes them using IO exchange values delivered in SSP IO Capability
Response event data set representing remote as a part of incoming pairing
process.
Change-Id: Ia73a912f6fb633d1d1bb086ef3af9a280ac5a864
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Turns on Secure Simple Pairing mode in controller. Since there's a prerequisite
the controller is 4.0+, turning the mode is unconditional.
Change-Id: Id4a10ccf8892a430b0daaa6750835516b17b7e8a
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Like for the other context-specific APIs, also provide a
context-agnostic wrapper.
Change-Id: Icf0a62f4c06aec42f0febc298edbd8bdeec63749
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Adds the following routines for waking a fiber that was previously
put to sleep using fiber_sleep().
isr_fiber_wakeup()
fiber_fiber_wakeup()
task_fiber_wakeup()
Change-Id: I7d78ee6997163d71b92f388a7b4c484f2e97862b
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The fiber_start() family of routines now return a nanokernel
thread id (nano_thread_id_t). This is a pre-requisite step for
allowing fiber_sleep() operations to be cancelled.
Change-Id: I74a3885eda3252c158f4a48e90244569633469c3
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Instead of returning a 'void *', the nanokernel fiber_delayed_start()
family of routines now return a handle of type nano_thread_id_t.
Consequently, the nanokernel fiber_delayed_start_cancel() family of
routines now accept a parameter of type nano_thread_id_t instead of
'void *'.
The complete list of affected nanokernel routines is:
fiber_delayed_start() fiber_delayed_start_cancel()
fiber_fiber_delayed_start() fiber_fiber_delayed_start_cancel()
task_fiber_delayed_start() task_fiber_delayed_start_cancel()
Change-Id: Ibd4658df3ef07e79a81b7643a8be9ea5ffe08ba0
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Since the return value of these callbacks is a number of bytes ssize_t
is more appropriate than int.
Change-Id: I3406fb382975d62f51e7a195666d0ae88364fd2c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If the user unsets CONFIG_NETWORKING_WITH_LOGGING, it will mean he
really doesn't want to get any network stack logging output.
Change-Id: I0629a045adbf8916327a8a9ba69b6e6e9ee2e7d9
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
() Add brief descriptions for #defines.
() Hides internal only API typedefs and struct.
Change-Id: I452c5d7fe56d57ba05338639986e2fff44a89244
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
() Add brief descriptions for #defines.
() Remove the callback enums as they are not being used.
() Hides internal only API typedefs and struct.
Change-Id: I62bc38890a7b49b3ec613064f7574e2f5b75b70c
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Document callbacks included in structs since they are also public API.
Change-Id: I8eda02b12172c54e8076208d8ea5ae246c650a3c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Document the parameters and expected return values of the read, write
and flush attribute callbacks.
Change-Id: I600da2ed64944986395520d7fae77fcb05b58e86
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Introduce BT_GATT_ERR macro to make it possible for application
callbacks to return exact ATT error codes.
Change-Id: I971536508e75036fbddc40b3f33e5201e11940bc
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
These are specified in the Core Specification Supplement.
Change-Id: Ieaa9f061666119bb430d77b0fd40b4891e515b81
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
For now this only exposes the various ATT error codes.
Change-Id: If568782e90dca22871681d2d3b2d81ae4cb8e5e4
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This adds CSC Service related UUID definitions.
Change-Id: I3fc77cd6561ccfd7de0d906c7ddcd5d8dac5bff9
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Make device APIs a group to enable in raw doxygen output and group
all IO drivers into one category.
Change-Id: I1f9338d3b977bd08a6a1b8d8b396ce1fba33aada
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This adds Environmental Sensing Service related UUID definitions.
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Change-Id: Idd87139971fb3c992b7fb7e346ce2ea90553ad38
Edit public API details for clarity, grammar, punctuation found
on file uart.h
Amost all elements in this driver are now documented.
Made consistent use of @retval to document return values.
Made all verbs in the brief descriptions imperative.
Change-Id: Ied3a80ea636855ba42b33877c0ac7ac66d42e458
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
A helper for the (fairly common) task of decoding individual 8-bit
values.
Change-Id: Id7e97df152232d5dd9861cf1e107877f1b8febaa
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Edit public API details for clarity, grammar, punctuation found
on file event_logger.h
Includes the event logger information in the ReST documentation.
Modifies doxygen.config to include the event logger.
Made consistent use of @retval to document return values.
Used imperative verbs for all @brief descriptions.
Change-Id: I88b8672a527138e2b4f7df4b4b0495a0d871cad3
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
This is a prologue to reverting:
commit 3c66686
Author: Benjamin Walsh <benjamin.walsh@windriver.com>
Date: Tue Feb 9 17:34:02 2016 -0500
sys_clock: start the microkernel ticker in the MICROKERNEL init level
to allow the devices initializing in pre-MICROKERNEL init levels to poll
the hi-res clock (sys_cycle_get_32()), which relies on the system clock
having been started.
This change allows starting the system clock in the NANOKERNEL init
level by delaying announcing the ticks until the MICROKERNEL init level.
Change-Id: I43d54bb5e2f182d4edd880da0124a0817f911943
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Review and edit public API details for clarity, consistency,
and punctuation.
Made consistent use of @retval to document return values.
Used imperative verbs for all @brief descriptions.
Change-Id: I7f1ec25ceddacedcc7a9c63e7efd0621e80ad0de
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Summary lines follow the @brief tag instead of the @file tag.
This prevents doxygen build warnings such as ...
The name xxx supplied as the second argument in the \file
statement is not an input file
Change-Id: I1014586ad21be12e14aa1d2a942e6b8a11211795
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Modifications to timer drivers and interrupt setup, to manage
the tickless idle for the x86 architecture
Change-Id: Ie02d484b7e5636de6ea382ba2eeed57e704c8498
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
This can be useful for both LE and BR/EDR connections so it sits
outside of those specific structs. The values are intentionally
matching the HCI values so for the HCI case we can just do a direct
assignment.
Change-Id: Id78d304bb61e5fd941f2c35351758c1eecc6ab6a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Review and edit API notes for punctuation and to make explanations about
conditional routines the same throughout microkernel APIs.
Made consistent use of @retval to document return values.
Used imperative verbs for all @brief descriptions.
Change-Id: I2da0ea869151f3bdd5846f86d31dfd899e1ca1fc
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
There are many situations when encoding data when we need to insert
single bytes to the buffer. With this helper the encoding code stays a
bit more readable.
Change-Id: Ibc0ce43af5ae25a1baa0f1adbc5816ae7c04e3bb
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Uses the correct doxygen formatting tags to identify variables.
Change-Id: Ia46d4e008eb7790383682ac33bd3d6dbc2a66a9d
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Reviewed for consistency, punctuation, parallelism among all
the microkernel API docs.
Change-Id: Ia40761694081f40d3ee9821058a6691cba98fc08
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
Review and update for parallelism and consistency in formatting,
punctuation, and phrasing among all the microkernel APIs.
Change-Id: I4677cfafd8dffa75b5b19db3d16f5b90ad41b70f
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
Reviewed for clarity and consistency in punctuation and style among
all the microkernel APIs.
Change-Id: I61548a906b4e89f2fbed214dbf7cda9fadac217d
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
Editing for consistency in punctuation and formatting among
the microkernel APIs.
Change-Id: I69b0541fbb45cdc0eb9368cf386d51c2a03a85f9
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
Edit the API for grammar, punctuation, clarity and doxygen format.
Change-Id: Iddf0a4f123658ece8313ab401718c77fcc715acd
Signed-off-by: Aceves <gerardo.aceves@intel.com>
Edit the API for grammar, punctuation, clarity and doxygen format.
Change-Id: I122f1993943f58d7262b239b887103f50ef8ddc7
Signed-off-by: Aceves <gerardo.aceves@intel.com>
Punctuation and style consistent among the microkernel APIs; made
sure imperative verb on @brief descriptions.
Change-Id: I0f270fdb9db4eeb45f65e483b3cafdcbc5c09418
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
Punctuation and style consistent among the microkernel APIs; made
sure imperative on @brief descriptions.
Change-Id: I79f107dccedc8e3468640b3c9066f838687d35c8
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
Edited API comments on memory_map.h to be consistent throughout
microkernel APIs and corrected spacing on descriptions
Change-Id: I14dae30decccf7385e9fea6d841c3e54fb1a9bb3
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
Edit public API details for clarity, grammar, punctuation found
on file i2c.h
Made consistent use of @retval to document return values.
Used imperative verbs for all @brief descriptions.
Change-Id: I87b262f6ab91a83f429b7f7d9152914b92e11c8a
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Edit public API details for clarity, grammar, punctuation found
on file pwm.h
Made consistent use of @retval to document return values.
Used imperative verbs for all @brief descriptions.
Change-Id: I5a0f6290361e499ceb911473338358128f85e25f
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Edit public API details for clarity, grammar, punctuation found
on file ipm.h
Made consistent use of @retval to document return values.
Used imperative verbs for all @brief descriptions.
Change-Id: Ie5516fcb18648a99c58bcfef7888286dead7cff4
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Edit public API details for clarity, grammar, punctuation found
on file pinmux.h
Change-Id: Ib75e5c3bff84709e8f3f830dd71dde00bdef08a2
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Edit public API details for clarity, grammar, punctuation found
on file gpio.h
Used imperative verbs for all @brief descriptions.
Change-Id: I5c9b7ac39d2b691d98f72b66c67f525ad0409207
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Edit public API details for clarity, grammar, punctuation found
on file spi.h
Made consistent use of @retval to document return values.
Used imperative verbs for all @brief descriptions.
Change-Id: Ie53eeeb79d399e8474fe7341a396f5437c2999dc
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
These are needed both by nble as well as the HCI stack and will likely
also be of use for applications.
Change-Id: Ifd10ae6df25151162d9d5491466324b4a42f5506
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This makes it easier to correlate the debug messages
to different fibers.
Change-Id: I6fb2d1265bb39fd27a1d1702e47eaf70e81ee98d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add read parameters to read callabck
Merge bt_gatt_read_multiple functionality into bt_gatt_read.
This makes it easier for application to handle all types of reads
as same sematics is kept for them.
Instead of destroy callback, call read_func with NULL data to
indicated that read has completed. This makes it clear when
read is completed and parameters used for it are no longer needed.
Thanks to this application doesn't need to abuse user data destroy
callback for detecting if read has completed. Since destroy callback
is no longer needed it is removed.
Also note that bt_gatt_read doesn't take any user data parameter
and that destroy callback was acctually called with read parameters.
If application would require to pass user data along with parameters
it may use CONTAINER_OF macro along with bt_gatt_read_params.
Change-Id: I8d6ea136b1e61c1dae73cca868b53c48c45a5492
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This removes destroy callback for userdata as bt_gatt_subscribe
doesn't take any user data parameters and that destroy callback
was acctually called with subscribe parameters.
We assume subscription is active if bt_gatt_subscribe returned 0
(ie write command was sent). This is due to remote might be sending
notifications before reply to write.
Also note that bt_gatt_subscribe doesn't take any user data parameters
and that destroy callback was acctually called with subscribe
parameters.
If application would require to pass user data along with parameters
it may use CONTAINER_OF macro along with bt_gatt_subscribe_params.
Change-Id: I58ac9cd481ffa08ccc2d7a0464ca75f61fb280c5
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Looking at all structs as to where we can pack them a little better, and
calling out the padding/stride at the end for future expansion.
Change-Id: I4a651092e950dd3d915af9fa0ee0d7d59803e58f
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Looking at the IDT in a debugger is confusing, add a pretty-printing
function.
Change-Id: Iacc5e204e5d11e3e875c75ddf6d2e2e80b230299
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Edit public API details for clarity, grammar, punctuation found
on file adc.h.
Used imperative verbs for all @brief descriptions.
Change-Id: Icd4787b450bb7cb2a706d38993f2a4c03d691994
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
If an ISR was enabled and ran before the thread that wants to wait for
completion actually does wait, the type of thread would not be
registered in the object. The ISR would thus not know what type of
semaphore to release. This caused the ISR to release the object for the
previous caller of device_sync_call_wait().
Instead, the ISR now looks if there is already a waiter: if not, it
marks the device as being ready in the object, which allows the thread
to skip taking the semaphore; if there is a waiter, the correct
semaphore type is released, as before.
Change-Id: Ib97480db8ba3e895812cf4bc209d9794639af325
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
TICKS_NONE was mistakenly used when waiting on the nanokernerel
semaphore in the microkernel case, instead of TICKS_UNLIMITED, causing a
thread that wants to wait to return immediately, as if the device was
always ready.
Change-Id: Id2376ebef324339fec05c56655e705755a670973
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Zephyr includes a Task Monitor feature that allows to
track events on the microkernel server scheduler.
Task monitor is integrated as a profiler point for the
Kernel Event Logger feature.
Change-Id: I7b8be5872439a333f976eada1aa3511d93b46388
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
We have a new policy: users should not be able to configure
an interrupt with "forbidden" priority levels, and any priority
levels with special semantics will be activated by flags.
Change-Id: I757c19cfedcb1d0938eaf4da348ddafb71b3e001
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Having priority levels 0 and 1 reserved on x86 due to implementation
details on how the CPU uses the vector table is confusing to users,
and makes it unnecessarily difficult to share drivers between arches.
Now on x86, priority levels 0 and 1 are available. Semantically, all
priority levels have had 2 subtracted from them.
It is no longer necessary to specify a priority level when the
vector itself is specified. If an IDT entry has a specific vector
associated with it, any priority argument is simply ignored.
In gen_idt, some simplifications have been made:
- The printed representation of a generated entry now fits on one line
- Some checks being done in validate_priority() were redundant, as
generate_interrupt_vector_bitmap() also ensures that there are
sufficient free vectors within a priority level.
Change-Id: I26669d8ee0a53f48fbc2283490a8c42d8b1daf8e
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
If an init or config function needs to configure a static interrupt or
otherwise do something that requires a build time reference to
a device with DEVICE_GET(), there is a dependency issue that so
far is usually resolved with a forward prototype of the init function.
In addition, there currently isn't a good way to declare a device in
a header so that DEVICE_GET() can be used in a different C file.
This patch should resolve both of these problems; the data structure
defined for the device is no longer static (the names have to be unique
anyway), and in cases where we need a forward declaration so that
DEVICE_GET() can be used, we have a new DEVICE_DECLARE() macro which
does this.
Change-Id: Ie8d53d0c344f61a130c735c86473562820190d70
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Applications should be able to update the connection parameters.
Change-Id: I446f64fcd0b27b605e636e566fb35a362a92de96
Signed-off-by: Louis Caron <louis.caron@intel.com>
Instead of destroy callback, call discovery_func with NULL attribute to
indicated that discovery has completed. This makes it clear when
discovery is completed and parameters used for it are no longer used.
Thanks to this application doesn't need to abuse user data destroy
callback for detecting if discovery has completed.
Also note that bt_gatt_discover doesn't take any user data parameter
and that destroy callback was acctually called with discovery
parameters.
If application would require to pass user data along with parameters
it may use CONTAINER_OF macro along with bt_gatt_discover_params.
Change-Id: Iec4eb9795975ef2555502e13a682e13ff37742e0
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Applications that need it can retrieve the connection
parameters at any time, connected callback for example,
and eventually handle the connection update callback or
not, this gives maximum flexibility for handling these
parameters and requesting change.
Change-Id: Iba7d30ade045875ebc721fd332e031d9008e248c
Signed-off-by: Louis Caron <louis.caron@intel.com>
The stack analyzer works now same was as the one found in
Bluetooth sub-system.
Change-Id: I75e393882db6ba83f991d37aa2bf81d960b61231
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This type should only be used as a pointer.
Change-Id: Icf656f310344cecbde527e809af6d00dcfc7ef82
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
In anticipation of supporting a local static random address in the
future it makes more sense to call BT_LE_ADV_ADDR_PUBLIC
BT_LE_ADV_ADDR_IDENTITY.
Change-Id: I4826f1dfb50b54e13a35cbe7ee74e28641c81ad1
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This way we don't need a special BT_BYTES macro and avoid bugs coming
from wrongly counted number of bytes (which is now evaluated at
build-time).
Change-Id: Ic6319234a816fe2fab6229b3bb980d0e3503e241
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
newlib is declaring __unused in cdef.h which was conflicting with
__unused member in struct net_buf. Use _unused name instead.
In file included from /work/Zephyr/project/zephyr-project/net/buf.c:27:0:
include/net/buf.h:38:14: error: declaration does not declare anything
[-Werror]
int __unused;
^
cc1: all warnings being treated as errors
Change-Id: I2df189a4d4aee0f982c2d28d24847052f6168d45
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Avoid build conflict when those are defined by someone else.
Change-Id: I1bdf4064ec2180fff311c2b7a34363c53f438602
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Some GPIO controllers allow individual pins to be detached
from the controller (i.e. the controller no longer affects
the pin output, or can read its state).
This adds the configuration bits to the API so this feature
can be used by apps.
Change-Id: I355fd5910a5439dcabe01ab40cd887dda30eab72
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
device_sync_call_complete can be called from ISR, fiber or task, thus
needs to be aware not only of the waiter context, but also on the actual
caller one.
Change-Id: I76652a2c44d854db9c34e7192355d455d43f61e3
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
There are no more users of this API, and the only user it had in the
past was quite a special corner case. Just remove it for the time
being.
Change-Id: I696139b493f9ca75530665de25a4a4e03fc0ac5b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Introduce new UUID API with bt_uuid, bt_uuid_16 and bt_uuid_32
structs. The specific size structs are derived from the common bt_uuid
struct to make it possible to use CONTAINER_OF().
Change-Id: I9cb03c73406acb7768d410fdf29eae75d252163c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
bt_l2cap_chan_send does actually return the number of bytes sent.
Change-Id: I9dd79da992577f2e1e8d30d42eeb0c398e48ff33
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In some cases we need the raw 16-bit UUID value instead of a full UUID
object. Add definitions of these values so that the code doesn't need
to do complicated tricks to get hold of them.
Change-Id: I98f276402f20fe03fea2777743f15ca7fcae42c6
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Adjusts encryption state name in connection complete event.
Change-Id: Ib7e6b2c5738ca9f5832e0e277d8f5718050f4bef
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
It's not a function and requires all its arguments to be build-time
constants. Make this more obvious to the end user to ease confusion.
Change-Id: I64107cf4d9db9f0e853026ce78e477060570fe6f
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is to be used by subsystem that don't really want to create a
device but rather only want to be initialized automatically during the
kernel init sequence. It is just a wrapper around DEVICE_INIT(), and
thus still uses a device object, but it hides that fact and can be
replaced in the future without changing its model.
It can be used when a device created does not have objects associated
with it, but only an init function, and also when the device name
(DEVICE_INIT(<dev_name>, ...) does not matter.
Change-Id: I5488f430a6fb757cdcb499ef352775dc67aa0565
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Rename them from __initconfig_XXX to __device_XXX, which is more
indicative of what they are.
Change-Id: Ia63ae40c16a2b6f0413c37863cddc39f04839b72
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
They have been replaced by DEVICE_INIT().
Change-Id: I06551f37593a3debb7eb221badd267bb5c7040c0
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
DEVICE_INIT() is a consolidation of DEVICE_INIT_CONFIG_DEFINE() and
DEVICE_DEFINE(), which are always used in pairs.
Change-Id: I263ac195970483e1bb8bf709ef807ba054db9c32
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Rename them to DEVICE_NAME_GET and DEVICE_GET to fit in the 'device'
namespace.
Change-Id: I407a7f284ed4d1c071961b46615eea859c2e825f
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Rename it to DEVICE_DEFINE() so that it fits in the 'device' namespace.
Change-Id: I3af3a39cf9154359b31d22729d0db9f710cd202b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Most systems have far less than 256 IRQ lines available, so
save some bytes in ROM by making this a config option.
On systems with MVIC, omit the table entirely as the mapping
is fixed.
The build cmd_gen_idt is slightly easier to read and will fail
immediately if any of the commands in the sequence error out.
Change-Id: I411f114557591e5cd96b618e6f79f97e8bedadf0
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The ADC read API has changed from asynchronous read to
synchronous read. There is no callback support anymore.
Change-Id: I2fdd10916dc6acb7b352bc549cd886929f7cd764
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Rename it to DEVICE_INIT_CONFIG_DEFINE(), because (a) it was not fitting
in any namespace and (b) it is not used to declare, but rather define a
object.
Change-Id: I1da5822f06b85a9fb024b5b184afd0ccc01012ec
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This bitfield is only needed to find unused vectors in the IDT
for installing dynamic interrupts.
Change-Id: I34ecd330774a0e50f240b4396527682eded29627
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
On ARC, the _sw_isr_table has an actual size of CONFIG_NUM_IRQS - 16
because the 16 first IRQ are reserved.
This patch has no impact on the generated binary but allows the
debugger to display valid information instead of displaying 16 false
entries containing garbage.
Change-Id: Iae2756c1bc333dc822e9f80c2115fba6521792a2
Signed-off-by: Fabien Chereau <fabien.chereau@intel.com>
Add sys_exc_connect() (and its x86-compatible alias nanoCpuExcConnect())
that allows connecting an exception handler at runtime.
The current implementation is a bit of a bastard, to avoid disturbing
the current implementation of the exception handlers. Instead of hooking
_exc_wrapper() in all vectors and adapting the exception handlers, the
current exception handlers are still hooked directly in the vectors.
When an exception is hooked at runtime, _exc_wrapper() gets installed in
the vector and the real handler gets inserted in _sw_exc_table; this
means that the scheme only works with non-XIP kernels.
This should be enhanced so that _exc_wrapper() is hooked in all vectors,
and that current exception handlers (for faults mostly) are reworked to
be inserted in the _sw_exc_table and wrapped in _exc_wrapper().
Change-Id: Icaa14f4835b57873d2905b7fbcbb94eeb3b247d1
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Rename the function and allow it to handle the 'type'
argument, which is ignored in this case.
Change-Id: I3d3493bea4511b2d026747505e7e52c5acc85012
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The ESF was built using the 'alias' names of the GPRs (a1, lr, pc, etc)
rather than their 'real' name (rN).
Change-Id: I49cae5e94869a79a3165dc7f2347d8cec39dbf67
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
On ARM, GPRs are often known by two names. E.g. the stack pointer is
both 'sp' and 'r13', the first parameter to a function 'a1' and 'r0',
etc. This macro allows defining them in a data structure, e.g. in the
ESF, without having to create a union, use the correct type, etc: it is
less error-prone and makes for shorter code.
sys_define_gpr_with_alias(name1, name2)
Change-Id: Ie4a6caa1ac23f26be4f7f0e05e9265f2655062cc
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The image will be linked at a different address and with different
ROM/RAM sizes to allow running a bootloder image that loads a payload
image. The addresses/sizes depend on if it is a XIP image or not
(CONFIG_XIP), and in the case of a XIP image, if it is a bootloader
image (CONFIG_IS_BOOTLOADER) or not.
In the case of a bootloader, it is given the full ROM and
CONFIG_BOOTLOADER_SRAM_SIZE kB of SRAM. When not a XIP image, it is given
the full SRAM minus CONFIG_BOOTLOADER_SRAM_SIZE kB, and is linked at the
start of SRAM.
Change-Id: Ibbb693c7bff022f313dac40f21c04a61f4bed115
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Rename it to 'waiter', since 'caller' is ambiguous from the point of
view of the _complete() API, since it is not the 'caller' in that case.
Change-Id: Ib3cadba99195935d67153023d731be26ffa58679
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Rename them to device_sync_ to fit in the device_ namespace.
Change-Id: I1088dda958584ed90b97137298050fee44c20ee4
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
FIFOP setting is a wrong assumption to know if radio is on.
Transmission runs on clock basis instead of pre-set loop counter. Thus
removing useless config option relevantly as well.
Opmitizing a bit the code as well, and making cc2520_on() public for
testing purpose.
Change-Id: I4495d1d6c19d10dcbc18f7e2fd5041720ec1f438
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Integrating it into network stack. Centralizing all in drivers/802.15.4
Change-Id: Ia2916ff652afe5fe736f6560c2ed4a911a5f0679
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Adds C++ support to the build system.
Change-Id: Ice1e57a13598e7a48b0bf3298fc318f4ce012ee6
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds a new uart_irq_tx_empty function in the UART base API.
Change-Id: Iab76251d4d40b92a553628956c49f1dd707292b5
Signed-off-by: Fabien Chereau <fabien.chereau@intel.com>
Adds a new uart_err_check function in the UART base API.
Change-Id: Ia94386d75fcb66a582a2ad919c1a7afb05dd7776
Signed-off-by: Fabien Chereau <fabien.chereau@intel.com>
The TASK_ENTRY_CPP macro is to be used to tag task entry points when
they are defined in a C++ file.
Change-Id: I213965cf55648f54972e1e95bf5b4269f03fd44d
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The EXTERN_C macro is to be used to ensure compatibility between C and C++;
It prevents name mangling in C++ environments.
Change-Id: I33be727150687901f7770306c8a07c16a7e46ffa
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds extern "C" { } blocks to header files so that they can be
safely used by C++ source files.
Change-Id: Ia4db0c36a5dac5d3de351184a297d2af0df64532
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Reported by Ramesh Thomas, the loop mode is included in the mode
configuration and not as a standalone bit. Also rewording word_size
parameter documentation.
Change-Id: I1e3337087316f56d58e843278b9c65e9f4f5476f
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
We can save a great deal of RAM this way, it only needs to be
in RAM if dynamic interrupts are in use.
At some point this config option broke, probably when static
interrupts were introduced into the system.
To induce build (instead of runtime) errors when irq_connect_dynamic()
is used without putting the table in RAM, the dynamic interrupt
functions are now conditionally compiled.
Change-Id: I4860508746fd375d189390163876c59b6c544c9a
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is needed for setting up an image that runs entirely from SRAM,
including its vector table. Ensure integrity of relocated vector table
by using serialization instructions when moving the vector table to
ensure it has been fully written before something makes use of it.
Change-Id: I00c600d557c87c75847f67fbc42f1c2c16157608
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This option misunderstands how XIP works. The IDT is ALWAYS in ROM,
the question is whether crt0 will copy it into RAM or not. You can't
save ROM space in this way.
Change-Id: I58025e3d71ead35730d0a5026213299b4fcb5eb9
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is being removed for a few reasons:
- AFAICT this is the only API in Zephyr that follows an allocate/free
model.
- There are no public APIs in the interrupt subsystem for releasing
or reconfiguring an interrupt. This code was relying on arch-specific
private APIs. If we really want to keep this capability we should
make these APIs public and consistent across arches.
- The use-case for this API is not clear, as Zephyr is not intended
for hot-pluggable peripherals. Built-in hardware tends to need its
interrupt for its entire life cycle.
- The current implementation of dynamic interrupts on x86 does not
support freeing a dynamic IRQ that was reserved with
irq_connect_dynamic(), causing this code not to work. To add this
would require reimplementing _get_dynamic_stub() to use a bitfield
or set of bitfields to track unused stubs rather than the simple
counter it uses now.
Change-Id: I7a03c134fb3498b91a1816318a88b293e26b846c
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Adds all valid link keys types available during legacy and SSP
authentication.
Change-Id: I42f2aba0122d33a984bd84c56b7a6a290f5e9e1d
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
This make more sense since the handles are normally self allocated by
the stack.
Change-Id: I198dd9c3ef6259cff8a0e528514918ec18990dea
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This add bt_gatt_attr_next function that can be used to iterate to next
attribute which is convenient if original attribute is known and using
bt_gatt_foreach_attr would require a lookup and another function to pass
as callback.
Change-Id: I1bd522fd4ae784e08aa375b35320191cbfc03a54
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This enable applications to build with a single table representing the
database where attributes don't have to store a pointer to the next
attribute thus reducing its size.
Change-Id: I4c84e2d50f9088a2f9879068890f0646e586e007
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add API definition and stubs for directed advertising.
Change-Id: Ib22d3acb6d2e76b0c638b26b8e07860cd189f640
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
All of the authentication APIs deal with bt_conn objects. For
consistency it makes therefore sense to use the proper bt_conn name
space with them.
Change-Id: I47912d542373df511524cc6ad2532d6c9a76ca68
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
To have some proper split of conn.h and bluetooth.h APIs make sure all
bt_conn related ones are in conn.h. This also helps avoid forward
declarations for some upcoming patches where we need bluetooth.h
defines from within conn.h.
Change-Id: Ief3d32118a6749fb5785dab6cb3fee4ebb86ddb4
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This is essential so that the application can be notified of
connection failures and also be able to know the reason for the
disconnection.
Change-Id: I30108958963f6aeac690612bb26738dc4c67ca80
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The authentication APIs may fail, so it's fair to give the application
a chance to catch these errors.
Change-Id: I323df86b94a823b201fe22d412e6bbcaa9029550
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Use __packed so that enums consume the smallest possible size (in our
case the same as uint8_t).
Change-Id: I0440113e88a24509f406375d99173ddb54890925
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Update the advertising API according to what has recently been
discussed and agreed upon.
Naming-wise the most important change is the removal of "EIR" which
was confusing since this is mainly used with LE at the moment. The
Core Specification Supplement consistently uses the generic terms data
and data type to describe what we're dealing with here, so the new
names are bt_data and BT_DATA.
Another change is to detach the actual data from the struct by
converting it from an array to a pointer. This is not only essential
for supporting BR/EDR (which has a different length) but to also
minimize memory usage.
Another change is to require the caller of bt_le_adv_start() to
provide the array lengths of the ad and sd paramters. This way we
don't have to have the empty (8-byte) element at the end of each
array.
Lastly, the bt_le_adv_start() logic is slightly modified so that it
will always clear the respective data if necessary. Previously the
user might have been left with a previous callers data if it passed
NULL to the API.
Change-Id: I318026ceb1b52bb688edf4dcfed82613bd15c3e1
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
According to Core Specification 4.2 Vol 3, Part G, 3.3.3.4,
Server Characteristic Configuration descriptor shall be:
"Readable with no authentication or authorization.
Writable with authentication and authorization defined by a
higher layer specification or is implementation specific."
So there shall be separate authorization permissions
for write and read access.
Change-Id: Ia2850acbb976571743bf96cf9cbe0c1128534073
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
The driver has to implement the logic in an interrupt based manner.
Applying the changes to the existing drivers.
Changing ADC's API and implementation as well to follow those changes.
Change-Id: Ie0c3e3e318f619ade6be935adb064a25446cc29c
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The interrupt API has been redesigned:
- irq_connect() for dynamic interrupts renamed to irq_connect_dynamic().
It will be used in situations where the new static irq_connect()
won't work, i.e. the value of arguments can't be computed at build time
- a new API for static interrupts replaces irq_connect(). it is used
exactly the same way as its dynamic counterpart. The old static irq
macros will be removed
- Separate stub assembly files are no longer needed as the stubs are now
generated inline with irq_connect()
ReST documentation updated for the changed API. Some detail about the
IDT in ROM added, and an oblique reference to the internal-only
_irq_handler_set() API removed; we don't talk about internal APIs in
the official documentation.
Change-Id: I280519993da0e0fe671eb537a876f67de33d3cd4
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We are checking against the wrong option, which does not exist.
Change-Id: Ied24daa0930bc4629750ea90f3ac6dbc45e87fff
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
This patch changes i2c_write and i2c_read APIs so they explicitly set
the I2C_MSG_STOP flag to their message to ensure that the I2C operation
is actually terminated once that message is sent.
Change-Id: Iea4da35b49ed01bee906679dece8638057d509ff
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
On SysV ABI, the NANO_ESF parameter is passed in via the stack.
For IAMCU, this is instead expected to be in EAX.
_ExcEnter is currently using EAX to stash the return address of
the calling stub while it does a stack switch. Change it to use ECX
for this purpose, and if we are running with IAMCU place the
parameter in EAX instead of pushing it.
The output of the fault handler has been cleaned up a bit and it
now also includes the code segment.
Change-Id: I466e3990a26a1a82dd486f3d8af5395eab60b049
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This was never implemented on ARC/ARM and has been superseded
by irq_offload().
Some checks that were only done with CONFIG_LOAPIC_DEBUG fall
under the category of 'shouldn't ever happen' and have been
converted into assertions, instead of propagating return values
which are largely never checked.
Change-Id: I4eedca05bb7b384c4f3aa41a4f037f221f4a9cfe
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This API is not being used for anything, the interrupts for UART
drivers are all being configured statically. Saves code space as
gc-sections can't tell that these APIs are unused.
Some instances where IRQ/priority information was being saved in
data structures and never used fixed.
Change-Id: If56b4fdc251b80be9094ffcbac6f61e265ac2ffd
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
If we are not doing any dynamic interrupts or exceptions, we
can put the IDT in ROM and save a considerable amount of RAM,
up to 2K if the IDT is the default size of 256 entries.
The _interrupt_vectors_allocated table can also be put in ROM
if we're not using any dynamic interrupts.
We introduce a new Kconfig option to force the IDT to be in RAM
for situations where no dynamic IRQs are used, but ROM footprint
needs to be conserved.
Change-Id: I38c9f1a8837b4db9f3dea1caa008374a26cbbf1d
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Make the i2c_transfer() to transact messages through the I2C bus.
It is useful for I2C storage devices, as now we can send one message
containing the destination byte/block address, then send the data
in another message. There is no need to construct one continuous
data buffer to send both address and data anymore.
The drivers and sample apps have been updated to utilize updated
API when appropriate. For i2c_dw, only master mode has been updated.
Slave mode will be updated once we can adequately test it.
Change-Id: I0a811d60567367817fcc8d15f5454e5c933722e2
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The new SYS_GET_DEVICE_NAME macro can be used in combination with
SYS_GET_DEVICE to obtain an external reference to a static device
object, e.g.:
extern struct device SYS_GET_DEVICE_NAME(my_device_name);
struct device* dev = SYS_GET_DEVICE(my_device_name);
dev is here set at compile time.
Change-Id: I9094925c685177f01e0cef194ec382ad49658f9d
Signed-off-by: Fabien Chereau <fabien.chereau@intel.com>
These symbols have the same name as the symbols from lib QMSI, which
causes a compilation failure, when lib QMSI is used.
This replaces the offending symbols with names which are more consistent
with the rest of the file (rtc_ prefix).
Change-Id: I288a1a229bf0b40f3b6fc8ffb35c502f998054b8
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Simplifies the nanokernel timer API so that the timeout parameter must be
specified when invoking nano_isr_timer_test(), nano_fiber_timer_test(),
nano_task_timer_test() and nano_timer_test().
This obsoletes the following APIs:
nano_fiber_timer_wait()
nano_task_timer_wait()
nano_timer_wait()
Note that even the though the new API requires that the timeout parameter
be specified, there are currentl only two acceptable values:
TICKS_NONE and TICKS_UNLIMITED
Theoretically, the current implementation would allow one to supply a
finite positive value for the timeout and the system would wait up to
that many ticks for the timer to expire. However, it is thought that
that unnecessarily complicates the nanokernel timer model and so it is
left as an unsupported option. Should that change, then that feature
could be enabled by updating the documentation.
Change-Id: I8835c5342ab5025d6f70fdfbed54a50add7568d7
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the nanokernel stack API so that the timeout parameter must be
specified when invoking nano_isr_stack_pop(), nano_fiber_stack_pop(),
nano_task_stack_pop() and nano_stack_pop().
This obsoletes the following APIs:
nano_fiber_stack_pop_wait()
nano_task_stack_pop_wait()
nano_stack_pop_wait()
Note that even though the new API requires that the timeout parameter
be specified, there are currently only two acceptable values:
TICKS_NONE and TICKS_UNLIMITED
This nanokernel option does not support CONFIG_NANO_TIMEOUTS.
Change-Id: Ic7f16ee30c3534115ceffa19ef8591ecc5a79080
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the nanokernel LIFO API so that the timeout parameter must be
specified when invoking nano_isr_lifo_get(), nano_fiber_lifo_get(),
nano_task_lifo_get() and nano_lifo_get().
This obsoletes the following APIs:
nano_fiber_lifo_get_wait()
nano_fiber_lifo_get_wait_timeout()
nano_task_lifo_get_wait()
nano_task_lifo_get_wait_timeout()
nano_lifo_get_wait()
nano_lifo_get_wait_timeout()
Change-Id: Ie9f93e46da42ea33c32544c02ab1d70b893cc198
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the nanokernel semaphore API so that the timeout parameter must be
specified when invoking nano_isr_sem_take(), nano_fiber_sem_take(),
nano_task_sem_take() and nano_sem_take().
This obsoletes the following APIs:
nano_fiber_sem_take_wait()
nano_fiber_sem_take_wait_timeout()
nano_task_sem_take_wait()
nano_task_sem_take_wait_timeout()
nano_sem_take_wait()
nano_sem_take_wait_timeout()
Change-Id: If7a4bce1bd8ec8d6410d04f3c16ff1922ff0910e
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the nanokernel FIFO API so that the timeout parameter must be
specified when invoking nano_isr_fifo_get(), nano_fiber_fifo_get(),
nano_task_fifo_get() and nano_fifo_get().
This obsoletes the following APIs:
nano_fiber_fifo_get_wait()
nano_fiber_fifo_get_wait_timeout()
nano_task_fifo_get_wait()
nano_task_fifo_get_wait_timeout()
nano_fifo_get_wait()
nano_fifo_get_wait_timeout()
Change-Id: Icbd2909292f1ced0bad8a70a075478536a141ef2
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
This adds 2 new APIs to the serial/uart drivers:
() One is to control the serial line, such as RTS and CTS.
() Another one is to allow driver to expose hardware specific functions
to apps. This is needed as some hardware may have extra registers to
set for baud rate.
To keep the code size small, these features are disabled by default.
Change-Id: I15c000ce68a0a490dcfd3493b2fe9bc51fa974fa
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This moves the baud rate and options fields out of the UART driver
config struct and into the driver data struct. This will allow
changing baud rate and options at runtime in the future.
Change-Id: I62ddea2f95e634f2d60eeb9537f960799fc9301f
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The routines _int_latency_start() and _int_latency_stop() have been
replaced by macros that evaluate to nothing when the kernel config
option INT_LATENCY_BENCHMARK is not enabled thereby giving a performance
boost to the x86 versions of irq_lock() and and irq_unlock().
Change-Id: Iabfa7bf001f5b8396e7bcf5eebd6b1aa342bac46
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Rename class in pci_dev_info struct to allow to use C++ compilers.
Updated drivers to use new struct.
Change-Id: I17b94cb7bc094bccd615c8389a28589bfa90cab8
Signed-off-by: Javier B Perez Hernandez <javier.b.perez.hernandez@linux.intel.com>
Note that the A->Comm is a pointer to the microkernel functions,
and thus is highly probable that the high 8-bit is occupied.
Therefore adds a new field in the monitor struct to store the pointer.
Change-Id: I7bcb34108c89a97cc38b2ac411ae4139b62786f3
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Change terminology and use SoC instead of platform. An SoC provides
features and default configurations available with an SoC. A board
implements the SoC and adds more features and IP block specific to the
board to extend the SoC functionality such as sensors and debugging
features.
Change-Id: I15e8d78a6d4ecd5cfb3bc25ced9ba77e5ea1122f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Extending the public interface of the pinmux to allow the end user
to set a pin as an input/output and to pull up the value on
a specified pin.
Change-Id: Ie0a3b6432dd8c7d7a02f32e3d22049bdd99f1410
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This patch fixes some outdated or invalid comments and adds some
clarification of GATT Discovery procedure.
Change-Id: I91994917bea246a2d112df65123a3e6dec42ee92
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
bt_gatt_discover function doesn't take user data and therefore
bt_gatt_discover_func_t is not providing any user data. It was
always providing discovery parameterts used so just match that
in function definition.
Change-Id: I90086285d02e2ef50be1d5d25299bb1c6819fdd7
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
We can calculate the length with strlen() and there should be no need
to consider anything else except nul-terminated C strings.
Change-Id: I02ec4b1dddbb1bd457f035926c86b27f4c2ab050
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This allows to conveniently start passive scan from central
applications.
Change-Id: Idf470be747ab7c6e7413cc368227b0b69e7b78a4
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
When the BLE GAP service needs to declare the preferred connection
parameters.
Change-Id: Iff8a6f68f2dfe478c44dcc5a3e95abda271ecc00
Signed-off-by: Louis Caron <louis.caron@intel.com>
Asynchronous functions use the parameters to store relevant data even
after the scope it has been called which means they have to remain valid
while the operations are in course.
Change-Id: I2cc79e5ce352fef4e077e9fb4cb0f4d111463d00
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This introduces bt_uuid_copy which can be used to copy UUID values.
Change-Id: I22d996bcace454769ac871a43b9acebe8b23db39
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Enables get basic connection info support for non-LE connections.
Change-Id: If295b552567886256cfc1e215bfe3149d2f1f60c
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Gets included authentication API in BR/EDR variant
Change-Id: I4fa55bb3baa8db79f6e9f5f1c65c0d93f8f8780a
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
BT_STACK depends on BT_STACK_DEBUG_EXTRA, therefore moving it there.
It also allows to use BT_STACK in drivers, at the moment only
Bluetooth stack uses it.
Change-Id: I41e0e0d49dae6abef2dc3a8d1d109127787d3db0
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
In order to support more standard descriptors, the PF macro and helper
function are added.
Change-Id: I52db3c32f40f39b9c6bfdb9573d0a614d0f3295e
Signed-off-by: Louis Caron <louis.caron@intel.com>
In order to support more standard descriptors, the UD macro and helper
function are added.
Change-Id: Ic9a82658668107b40abc5c98002fe5091dc10f08
Signed-off-by: Louis Caron <louis.caron@intel.com>
This patch replaces bt_gatt_attr_func_t with bt_gatt_discover_func_t
to be used as a type of discovery callback. The reason is
bt_gatt_attr_func_t don't return bt_conn which could be used
later on to issue other commands and to application to know
from which connection this results come.
Change-Id: I1f26c72ad5c8a0b97485a337c7005d34281586d7
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This makes it simpler to add the services directly into GATT services
table.
Change-Id: I090c7f9396329cf524947dd6647230c663a55f60
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add basic color logging support. Error logs will be printed in red
whereas warn() logs in yellow. The support is behind a Kconfig option
in case someone needs to build the stack for a terminal that doesn't
support the ANSI color codes.
Change-Id: I080e32db68f87e81f1bb54aa4c634f7cd38f1e33
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The code to poke the system integration module to disable clock gating
for UARTs only works for UART0-3 since all the bits are in the same
register. However, clocks for UART4 and UART5 are controlled by
another register. This means that we have been writing to the wrong
bit for enabling UART4.
This patch fixes this issue, and moves the clock gating clock into
board initialization. The incorrect code has also been removed to
prevent accidental mis-use. The dev_data struct is no longer needed
for uart_k20, so that is removed as well.
Change-Id: I67845a417e43647bf0ffcbdbda34ce68fa887713
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add support for compilers conforming to the IAMCU calling convention
as documented by
https://github.com/hjl-tools/x86-psABI/wiki/iamcu-psABI-0.7.pdf
Change-Id: I6fd9d5bede0538b2049772e3850a5940c5dd911e
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Changes the FIFO API so that the timeout parameter must be specified
when invoking task_fifo_get() thereby making the following APIs obsolete:
task_fifo_get_wait()
task_fifo_get_wait_timeout()
_task_fifo_get()
Change-Id: Iac626d9d6d4836033e06ffd5a2ca415ab2630b1a
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the FIFO API so that the timeout parameter must be specified
when invoking task_fifo_put() thereby making the following APIs obsolete:
task_fifo_put_wait()
task_fifo_put_wait_timeout()
_task_fifo_put()
Change-Id: Ifbbfb7018fd9a71551ccba648fda6d2d59d589a6
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the mutex API so that the timeout parameter must be specified
when invoking task_mutex_lock() thereby obsoleting the following APIs:
task_mutex_lock_wait()
task_mutex_lock_wait_timeout()
_task_mutex_lock()
Change-Id: I15d4bddbdc2707b3cbdab672498170da1c47b8db
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the mem_pool API so that the timeout parameter must be specified
when invoking task_mem_pool_alloc() thereby obsoleting the following APIs:
task_mem_pool_alloc_wait()
task_mem_pool_alloc_wait_alloc()
_task_mem_pool_alloc()
Change-Id: Ifa88f13bca98ca3c7d0e1a3b64b40a00068619e0
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the mem_map API so that the timeout parameter must be specified
when invoking task_mem_map_alloc() thereby obsoleting the following APIs:
task_mem_map_alloc_wait()
task_mem_map_alloc_wait_alloc()
_task_mem_map_alloc()
Change-Id: I8905d07fa4b8c3729ca144e8f09e7ad0c7bf0f43
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the semaphore API so that the timeout parameter must be specified
when invoking task_sem_group_take() thereby obsoleting the following APIs:
task_sem_group_take_wait()
task_sem_group_take_wait_timeout()
_task_sem_group_take()
Change-Id: I64e3f4c9f1e74a86b49d4a0e55b82ecee7733220
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the semaphore API so that the timeout parameter must be specified
when invoking task_sem_take() thereby obsoleting the following APIs:
task_sem_take_wait()
task_sem_take_wait_timeout()
_task_sem_take()
Change-Id: I746d5c966a3b81ffe014333af51aa10ea8a63263
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the pipe API so that the timeout parameter must be specified
when invoking task_pipe_get() thereby obsoleting the following APIs:
task_pipe_get_wait()
task_pipe_get_wait_timeout()
_task_pipe_get()
Change-Id: If249e57d086fef15fdc1616965f53b310ac9cf9d
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the pipe API so that the timeout parameter must be specified
when invoking task_pipe_put() thereby obsoletingg the following APIs:
task_pipe_put_wait()
task_pipe_put_wait_timeout()
_task_pipe_put()
Change-Id: Ie5693716828e9d8681434c0d130792279ab97acc
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the mailbox API so that the timeout parameter must be specified
when invoking task_mbox_data_block_get() thereby obsoleting the
following APIs:
task_mbox_data_block_get_wait()
task_mbox_data_block_get_wait_timeout()
_task_mbox_data_block_get()
Change-Id: I284be505e6de792ba5483611d1299063162550e1
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the event AIP so that the timeout parameter must be specified
when invoking task_event_recv() thereby making the following APIs obsolete:
task_event_recv()
task_event_recv_wait()
task_event_recv_wait_timeout()
_task_event_recv()
Change-Id: I165a8efbdedb431fee0c20e9ad1f1942c04124c0
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the task IRQ API so that not only does task_irq_test() become
task_irq_wait(), but that the timeout parameter must also be specified.
Use of task_irq_wait() obsoletes the following APIs:
task_irq_test()
task_irq_test_wait()
task_irq_test_wait_timeout()
_task_irq_test()
Change-Id: Ie4d15f29941429249e9fbb258d29ec2b3ae73a93
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the mailbox API so that the timeout parameter must be specified
when invoking task_mbox_get() thereby obsoleting the following APIs:
task_mbox_get_wait()
task_mbox_get_wait_timeout()
_task_mbox_get()
Change-Id: Ie028223ec342666e61d3d69750aec37dbe2b493e
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the mailbox API so that the timeout parameter must be specified
when invoking task_mbox_put() thereby obsoleting the following APIs:
task_mbox_put_wait()
task_mbox_put_wait_timeout()
_task_mbox_put()
Change-Id: I174857bdf32fe7e59b79838185666cd557312814
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
All of these stubs at the end pop the stack and tell the LOAPIC
that we are at EOI. Put this in common code which falls through to
_IntExit(). Saves 8 bytes per static IRQ stub. There is also small
constant savings in the common code for dynamic IRQs.
Change-Id: If17e9f105928a4251a2cb3fc0d192649c1c4d84b
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Quark SE Lakemont core has a hardware bug where the LOAPIC does
not properly notify the IOAPIC to clear the IRR bit for level-
triggered interrupts.
This patch introduces a workaround where the vector ID of the
in-service interrupt is manually written to the IOAPIC_EOI
register, resulting in the bit being cleared.
Unfortunately, in the context where EOI happens it's very difficult
to identify which IRQ line is being serviced, so this is done
unconditionally for all interrupts vectors whether they are registered
in the IOAPIC RTE table or not.
Change-Id: I639cd258dec4f50934e17eadbb821e6a7112e636
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Initialization and usage of nano semaphore require an actual semaphore
object in memory. So make sure the semaphore is there.
Change-Id: I4a7391973c65f99132735133b82f1e3837eab4f8
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This is part of the convenience wrapper for timers as well as
nano_timer_init(), nano_timer_start(), etc...
Change-Id: I256e16682e5520eac2b590afcaf00df8b6e8ffd6
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This was only needed for an older implementation of software interrupts,
now superseded by the irq_offload() API (which doesn't interact with
the interrupt controller at all)
Change-Id: I8aa696d370ae1799872f6d70de69f3cb5b47456a
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
To many people, IPI connotes inter-processor interrupts on SMP
systems. Rename this to IPM, or Inter-Processor Mailboxes.
Change-Id: I032815e23c69a8297c0a43992132441c240fb71e
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Use defined(__clang__) otherwise it might fail in some cases.
Change-Id: Ifb2e1cd971325e2a7f87e530e5ee921a5fcee6b9
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add null definitions for the interrupt latency measurement API so we
can remove compile fences in C code.
Change-Id: If86eedf79afcb49002108814dd4fb864956eb667
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Other internal functions are shown in this header, no reason to
keep this a secret.
Change-Id: Icb7d36206148c281f1960d1ac10368d9bb3033f1
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Now that i2c is fully synchronous on top of an interrupt based
implementation, polling mode can be removed. Applying the API change
into the existing drivers.
Change-Id: I05d2a6089743b6b69f7c9da6312057134578e2f7
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The initialization code and macros are the same. So extracts it
and puts it into the driver. This is another step to follow
the driver model.
Those empty C files are there because the current Kbuild
requires Makefile to be present at those directories,
(due to arch/x86/Kbuild), which requires building some object
files. So the empty source files are there to produce empty
object files to satisfy this.
Change-Id: I14056347ea14cff227d9e8960192e8673c0019b8
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The initialization code and macros are the same. So extracts it
and puts it into the driver. This is another step to follow
the driver model.
Change-Id: I1d379068f64855d5d4595838040ec50f97f638a0
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The initialization code and macros are the same. So extracts it
and puts it into the driver. This is another step to follow
the driver model.
Change-Id: I1af8b2888779b2b58367feaff9ee1a6d97b4873c
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Enables getting by host connection complete event and handle
internal state of related to the event connection object.
Change-Id: Ie6252ff33cc2e1fff5a4ce746fda7c3a59bf8aab
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
To conform to API convention rename BT_CONN_TYPE_BREDR to BT_CONN_TYPE_BR.
Updates stack code so far uses it.
Change-Id: Ia759ef68bbdb232e3b0992740e0536d310e19010
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Applications may want to protect the privacy (identity of the local
device). One way to do this is to generate a Non-resolvable Private
Address and use that when advertising.
Change-Id: Ib852b03c14af062f914aa99a14e50c2e52ac78c2
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There's no reason for us to go revealing our public address when doing
active scanning.
Change-Id: I27bed74bb377b8bba75843ea76acb8f0d58f70f7
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Applications may want fine-grained control of connection parameters.
The two APIs to provide this through are bt_le_set_auto_conn() as well
as bt_conn_create_le().
Change-Id: If5cddbbf017b868d768d18d2a09daf4af8aa00d8
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Once we start persistently storing the addresses of devices we want to
reconnect to we also need a way to reload them to the stack. Since we
don't have a connection object at this point the API cannot take that
as a parameter. Instead rename the function and have it take
bt_addr_le_t as a parameter.
The feature was also lacking proper reference counting for the
connection, which this patch now adds (the flag itself owns a
reference). The function is now also possible to call before bt_init()
so that if we load the stack with multiple devices the HCI doesn't get
bombarded with lots of scan enable/disable commands.
Change-Id: I9072bf061eb64f2ecec96f74fb176be13e5bdaee
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This way the app can start passive scanning if it wants.
Change-Id: Iab3e60863d5a1a013a5f069a98664628c7b14418
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
All current user just want basic active scanning so a corresponding
macro makes more sense than something based on duplicate filtering.
Change-Id: I97787be24b89fad66f2a952c5d53ab76f4e062fb
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This uses BT_UUID_DECLARE_16 in macros that can only be of 16 bits
format.
Change-Id: I45d4bcca9859a2e279b1199546891df75a039589
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes it easier to declare 16 and 128 bits UUIDS and also save space
in case of 16 bits.
Change-Id: I5790afd9504ee0cca4a951be6bc542685d0a35fb
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
We'll need to have a much more flexible LE advertising API. This is a
first step in that direction. A convenience BT_LE_ADV() macro is
provided to ease converting application code.
Change-Id: I74854487bbdfb4b1cf1bee0b6351d1750a56ff86
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We'll need to have a much more flexible LE scanning API. This is a
first step towards it. The existing BT_LE_SCAN_FILTER_DUP_* enum
values are converted to macros to avoid having to update application
code at this point.
Change-Id: I0c8d29dc156bad67cddc9401c0d72aee8ec6d8de
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
bt_br_* is equally understandable and the same length as the
corresponding bt_le_* prefix on the LE side.
Change-Id: I1820f9b9fab6363b696072f6b70d57c0bc780078
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
To have a clear split between LE & BR/EDR rename these APIs with the
appropriate prefixes.
Change-Id: I983df2b5880947d96f0ad289d12f3383f44894be
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Instead of struct forward declaration there should be used
struct type with at least empty body.
Otherwise compiler doesn't know the size of variable of that type
used later and emits error.
Change-Id: Ie0643ed92b8eb95c1d55c9295117a2a9b8cc95cc
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Adds capability to stack to make controller discoverable and
connectable.
Change-Id: Iffe380d2bde0c193f806b76cce3933914c9a4796
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
The IP and L2 buffer debugging is now activated if one enables
CONFIG_NETWORKING_WITH_LOGGING option.
Change-Id: Idad4978cfd6bd705bdde6e21f1edcd3c7d280c75
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make newline part of log macros so that caller doesn't have to
append '\n' every time logs are used. This make sure that no
log will be missing new line which results in concatenated log
messages.
Change-Id: I3231ae747c790816dbc1608e0a3bd56467ba0a1b
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
It's very rare to have lines exceeding 100 characters (default console
width being 80) so 1024 is quite overkill. Even 256 is probably more
than anyone will need any time soon, but if that becomes an issue this
define can be converted to a Kconfig option in the future.
Change-Id: If5fd324b17a0e8ef7b39ea7cc6624739d0241cac
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Shell applications may want to have a dynamic prompt rather than a
fixed string. Add a new API to let the application specify a custom
callback instead of using the fixed string given to shell_init().
Change-Id: I9844481057fc8e164530a677e7cb1bfb6d02cfc0
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
A platform might provide multiple RTC, either internally or externally.
Applying the changes to the DesignWare driver relevantly as well as
to the sample code.
Change-Id: Ia70e791a6c45e186cbc4dc900a268fa882331af5
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
A platform might provide multiple watchdogs, either internally or
externally. Applying the changes to the DesignWare driver relevantly as
well as into the sample application.
Taking the opportunity to apply propre style when need (80 chars limit
for instance).
Change-Id: Iad020c697846db483a70a748cfc8fe7147ec3c04
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Removed old style file description and documnetation and apply
doxygen synatx.
Change-Id: I3ac9f06d4f574bf3c79c6f6044cec3a7e2f6e4c8
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The option sleep event did not work without enabling
the context switch option. This patch fixes that error.
Change-Id: I2e44ddabb7ce190d3a2d5ccece10848f6c44cb48
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Introduce the device_sync_call_t object type and its API.
This object type allows one thread to perform synchronous calls into a
driver. Only one thread can do such calls per instance of the
device_sync_call_t object since it makes a global record of what type of
thread is waiting on it.
Based on an idea from Dmitriy Korovkin and Peter Mitsis, moving their
proposal to a more generic API provides the solution for all device
drivers that exposes synchronous API in an interrupt based
implementation.
Change-Id: I793fac76645396bf4eb6be38b5a130ac6bde8f73
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Removes the 'priority' parameter from the IRQ_CONFIG macro.
This parameter was not used anymore in any architecture.
The priority is handled in the IRQ_CONNECT macro.
The documentation is updated as well.
Change-Id: I24a293c5e41bd729d5e759113e0c4a8a6a61e0dd
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Fixes the compilation error when CONFIG_UART_INTERRUPT_DRIVEN
is enabled.
Change-Id: I175eb6557a8ec9fa7291e20a5c05ee84797c230b
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The content of include/drivers/hpet.h is really private to
the driver and does not need to be exposed in public include
directory. So move the content into driver code.
Change-Id: Ica442e43c480a6b079b8d3c4e75e67adcfd0ba6b
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Adds static irq support for the Quark SE platform for the ARC core.
New linker sections and sw isr table initialization is needed to support
static IRQ.
Change-Id: I82af98a189f5a156e7f1018f3ecdbfa73ad3e6ef
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Adds support for static IRQ handler initialization.
Currently, IRQ_CONNECT and IRQ_CONFIG macros are emulating static
behavior through dynamic initialization.
This commit updates the macros to get real static initialization.
IRQ handlers must be assigned at build time.
Change-Id: Ia07fb25a5e4dae489f84ffcedb28007ee18a3b82
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
IRQ_CONNECT_STATIC takes 6 arguments on other
architectures, but the ARC one had only 5.
Change-Id: I257e8db12582ee2d6f93bba63af9aa597197a53d
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
The _PASTE and _PASTE2 macros are relocated from init.h (device handling) to
toolchain/common.h for better reuse.
_PASTE and PASTE_2 macro are renamed to _CONCAT and _DO_CONCAT.
These names are more descriptive.
Change-Id: Ie2f5b0cba1f1179eb3fb5ec00236a75a73267f98
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Remove unused code after refactoring all the serial/UART drivers.
() Since device initialization is done by the drivers themselves,
there is no need to have config_func(), port_init() and uart_init()
to perform configuration external to driver. So remove the related
bits.
() The IRQ priority is only being used when doing IRQ_CONNECT_STATIC().
So there is no need to send it over during uart_init().
Change-Id: I72eb3402036b53cbc01c1eb968de0ddfa0096ee2
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
() Rename nsim_uart.c to uart_nsim.c. This is to follow
the driver naming convention.
() Rename functions nsim_uart_*() to uart_nsim_*(),
following driver naming convention.
() UART ports initialization is moved into the driver itself.
All the init code in platform config files is removed.
() Adds (many) Kconfig options. These don't have to be defined
in each platform's board.h anymore.
Change-Id: If015f39a6f6b4fcc65625e6e5f973b4469202f54
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
() Rename k20UartDrv.c to uart_k20.c. This is to follow the driver
naming convention.
() Move driver/serial/k20_uart.h to drivers/serial/uart_k20_priv.h
as this contains definitions private to the driver, and
should not be exposed in public include directory.
() Rename functions k20_uart_*() to uart_k20_*(), following
driver naming convention.
() Renames CONFIG_K20_UART_* to CONFIG_UART_K20_*
() UART ports initialization is moved into the driver itself.
All the init code in platform config files is removed.
() Adds (many) Kconfig options. These don't have to be defined
in each platform's board.h anymore.
Change-Id: If1be1fde083aba6ff68062db2059aef08617a286
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds the UART initialization information into the UART device
config struct. This is in preparation to move driver initialization
from platform config files into the driver themselves.
Change-Id: I0e2d501b2c6c2ed19648882031cc5f07ff0f386a
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
With MVIC these can't be arbitrarily assigned and the vector must be
<irq num> + 0x20.
The correct number of vectors is now set for footprint-min on D2000.
Change-Id: Ibf59921dbc438c7465b7050dd74d0badc9a91fc3
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Uses the "trap_s" exception to simulate entry into IRQ context;
offloaded functions run on the FIRQ stack.
Change-Id: I310ce42b45aca5dabd1d27e486645d23fa0b118f
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Move btshell.h out of samples into include/misc and rename to shell.h
Move btshell.c into driver/console and rename to console_handler_shell.c
as an shell implementation based on new config
CONFIG_CONSOLE_HANDLER_SHELL.
Add shell_register_app_cmd_handler for an to app to optionally call so
that it can receive cmdlines not handled by the cmds registered with
shell_init
Change-Id: I5c1585e62ff7a0ee923c6c92833cc762cf912bad
Signed-off-by: Thomas Heeley <thomas.heeley@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Simplify driver by using sys_io functions and implement
wdt_read_config
Change-Id: I119615f1c391daae43a3b8db30319c51167ae05b
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Software interrupts or system calls aren't really appropriate for
zephyr, but we have an ongoing need in our test code to run a
function with arguments synchronously in interrupt context.
This patch introduces irq_offload() which allows us to do this without
separate initialization or having to manage fake IRQs in the
interrupt controller.
ARM assembly code contributed by Benjamin Walsh
<benjamin.walsh@windriver.com>
ARC is not yet implemented but will be in a subsequent patch.
irq_test_common.h has been removed and all test cases updated to
use the new API.
Change-Id: I9af99ed31b62bc7eb340e32cf65e3d11354d1ec7
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This way, it does not fall in the middle of a group, like the RAM group
and as a side-effect potentially move the dot (current address pointer).
Change-Id: Iefbff8bbeadfc740dee61154d7db99b7b7aad6d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The linker scripts for the quark_se_ss and generic_arc platforms are the
exact same, so extract the contents in an includable file.
Change-Id: I2cb90a6f819b12db77880228e41ff14c9755d59a
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Removes the following deprecated routines:
nano_cycle_get_32()
task_cycle_get_32()
fiber_cycle_get_32()
isr_cycle_get_32()
Those routines have all been replaced by sys_cycle_get_32().
Change-Id: I8709952633bb87c8963e88caffe1036fb9add527
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Replaces calls to nano_cycle_get_32() and task_cycle_get_32()
with sys_cycle_get_32() as that is the preferred API to use.
Change-Id: I0ad1c50083c4cfdd9a26c2f20ba24e065410d90d
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Renames _sys_clock_cycle_get() (provided by the timer driver)
to sys_cycle_get_32(). It is the preferred method to read the
hardware clock.
Change-Id: Ifea5213d8c04a8bf7b9114b048c5db0ccee61549
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Put initialization priorities as device driver Kconfig
parameter.
Initialization priority value for each platform is defined
in the platform Kconfig file.
Drivers and platform code use SYS_DEFINE_DEVICE to add
and initialization function.
Change-Id: I2f4f3c7370dac02408a1b50a0a1bade8b427a282
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Initialization level can be one of five predefined.
Init priority is numeric from 1 to 99. If init level or priority
is defined wrong, linker prints out the message and stops.
Change-Id: I165a32ffb668cda983fd48eb2aa7b94998e31a18
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Allow initialization priority be defined C macros.
Change-Id: I6155523d983efe943fcdd9ec6b49d7396b904ab0
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Removes the following context based APIs:
isr_tick_get_()
isr_tick_get_32()
fiber_tick_get()
fiber_tick_get_32()
The routines sys_tick_get() and sys_tick_get_32() are to be used instead.
Change-Id: I3fa1338f174b10e783bfb00941edadfff16eeaba
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Replaces microkernel global variable _k_sys_clock_tick_count with the
global variable _sys_clock_tick_count. This allows both the microkernel
and the nanokernel to use the same variable to track system clock ticks
instead of using two different ones.
Change-Id: Ia4eebf022f59d130ad1882e0e550016527543a45
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Renames nanokernel global variable _nano_ticks to _sys_clock_tick_count.
Change-Id: I857407f1f7e8d9fd2eedc1c1696851173e58d2b4
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Fixes the type of global variable _sys_idle_elapsed_ticks such that
both its nanokernel and microkernel definitions are of the same
type--int32_t.
One of the repercussions of this is that code related to the routine
_nano_sys_clock_tick_announce() does not need the application of
typecasting.
Change-Id: I3d7374cd1a32aea7e4651726febde74ebe4ac8ac
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Standardizes appearance, corrects errors, improves readability,
and fills in gaps. Also removes unnecessary documentation of
internal APIs.
Change-Id: I9a12b07e4a0ecff2785899b848a6c8fb69e55781
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Standardizes appearance, corrects errors, improves readability,
and fils in gaps. Also relocates documentation for internal APIs.
Removes mention of non-existent task_sem_group_take() API from
the Kernel Primer document. The microkernel's semaphore group logic
currently allows a task to take a semaphore from a semaphore group
in a blocking manner.
Change-Id: Ib41a43775a97483a5adc552b70575ae4269aba35
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Some timer devices, such as the HPET, read their frequencies at runtime.
All global constant values must be set at runtime in that case.
Change-Id: I408babce6deb857748a87691132d7e27e88f0bb8
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This routine allows the background task to sleep for a specified
number of ticks.
Change-Id: I2533005e3d9a564c2ca0de8333e224743cefb658
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Improves documentation consistency by using "N/A" instead of "None"
when the routine does not return a value.
Change-Id: I429a159b3037742cbc431db0cb4828ab9d6d35c3
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds the following generic stack routines:
nano_stack_push()
nano_stack_stack_pop()
nano_stack_pop_wait()
Those routines are convenience wrappers for invoking the task, fiber and
ISR (if applicable) specific implementations.
Change-Id: I6e7bb2ca69bb2e3d5ed955654390746e76e4ab92
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds the following generic semaphore routines:
nano_sem_take()
nano_sem_take_wait()
Those routines are convenience wrappers for invoking the task, fiber and
ISR (if applicable) specific implementations.
Change-Id: I09d715d07263eb0ee526231120ba65d1e3feebce
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds the following generic lifo routines:
nano_lifo_put()
nano_lifo_get()
nano_lifo_get_wait()
nano_lifo_get_wait_timeout()
Those routines are convenience wrappers for invoking the task, fiber and
ISR (if applicable) specific implementations.
Change-Id: I5252e4643fe4772f1309b26c1b3e4319f5035956
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds the following generic fifo routine:
nano_fifo_get_wait_timeout()
That routine is a convenience wrapper for invoking the task or fiber
specific implementation.
Change-Id: I9bd709ea416db834e2a0c5de81257c363e7db066
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Do not depend on environment variables and use a kconfig variable
for defining the architecture.
In addition, remove the X86_32 variable, it just duplicates X86 for
not good reason, at least until start supporting MCUs with 64bit.
Change-Id: Ia001db81ed007e6a43f34506fed9be1345b88a4b
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Original name was too generic and confusing. This patch renames
driver to pipe UART and moves it to console drivers folder. Kconfig
destription is also improved.
Change-Id: I716fdbf7d636bbdc03b0fce27a59fd866f473246
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
If the SDU length is bigger than the amount data received in the first
packet it means it will be segmented in 2 or more packet until the SDU
is completed.
Since the MTU required by the upper layer could be much bigger than the
ACL buffer the code now request a buffer to reassemble the SDU.
Change-Id: I286d16e185f59a8128c4357dddebdc13145dfe31
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This use struct nano_sem to control the credits so when sending if the
credits hit zero it now waits more credits to continue instead of
failing.
Change-Id: I2da4692eaa16828f74a1df4346583258bb4cf8f0
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds bt_l2cap_chan_send which can be used to send data to
dynamic channels resulting in the following trace:
< ACL Data TX: Handle 3585 flags 0x01 dlen 17
Channel: 64 len 24 [PSM 128 mode 0] {chan 5}
a0 02 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
ff ff ff ff ff ff ff ff ........
Change-Id: I753e301b1125ef21a345ab96470f15bc53a4869a
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This allows to request user to confirm displayed passkey with remote
device. This allows to have authenticated LE SC link resulting in FIPS
security level.
Change-Id: I5b6c1666e3d1687cc04c5d66529372db090dd000
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This module is based on the standard Local APIC and IO APIC source modules.
This modules combines these modules into one source module that exports the
same APIs defined by the Local APIC and IO APIC header modules. These
routine have been adapted for the Quark D2000 Interrupt Controller which has
a cutdown implementation of the Local APIC & IO APIC register sets.
Change-Id: Ic80aa78918483663d76054ebadefa08d8a3f188a
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This adds the driver to support DesignWare AIO/Comparator
under drivers/aio.
Change-Id: Id6cb1b507c0526098f163f74c188e990590797c2
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
These should now work for drivers written for other arches.
Still a hack to do all the IRQ setup at runtime.
Change-Id: I9717f74abef3b9934f9a1c0acbd76d960ed7a3cb
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Quark SE provides various clock controllers through its SCSS block.
Peripheral, external, sensor, and others.
This current drivers provides only the clock gating capability, for
peripheral, external and sensor. But it could support divider and more
other features once defined in the generic API.
Note: such clock has _nothing_ to do with a Real Time Clock (RTC).
An RTC provide clock timing like a watch would do. Here the clock
controller is about circuit clocking.
Change-Id: I1a365ae730dfc6be7686271f7fbb693e64a6ff6f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Adding DW real time clock support. This driver is used by the Quark SE
and Quark D2000 SoCs.
Change-Id: Iba8ddee1b1b5fee298db95b63418e152774662a4
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The new flags parameter needs some documentation.
Change-Id: I24dc9df62323957bb4b294adf27487df3f76ea01
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Standardizes appearance, corrects errors, improves readability,
and fills in gaps. Also streamlines descriptions for internal APIs
that don't require the same level of detail as public APIs.
Change-Id: Ic0f8149d14a8dab5e6df28b594c9b2e17f73e7b6
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Was exposed when building with clang. No need for a second const.
Change-Id: Ie97f6a4756aff62ce969e3eb786593f2fc175a56
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Fix a few spots where building with with clang fails.
Change-Id: I621c7cb8daf119bf89ad512168d70e1c9b67e53f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This will be used to determine if controller supports
"LE Read Local P-256 Public Key" and LE Generate DH Key" commands.
Change-Id: Ib2bf7cfa99a20c07af0d3043ac9f9c2e0a6c2fcb
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
"LE Read Local P-256 Public Key" and LE Generate DH Key" commands
are used for LE Secure Connections pairing. "LE Set Event Mask"
is used to unmask events generated by those commands.
Change-Id: I601c8e21093ed2170dfe8e5618b34493268fe68d
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This allows to disable events not required by application. In future
this can be extended to enable events that are not enabled by default.
< HCI Command: LE Set Event Mask (0x08|0x0001) plen 8 24.018392
Mask: 0x000000000000001f
LE Connection Complete
LE Advertising Report
LE Connection Update Complete
LE Read Remote Used Features Complete
LE Long Term Key Request
> HCI Event: Command Complete (0x0e) plen 4 24.019215
LE Set Event Mask (0x08|0x0001) ncmd 1
Status: Success (0x00)
Change-Id: I29bfaa0743ac9e604a637f51503ff28a9b2074c2
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
With this patch application can unsubscribe notifications
from Subscribe value callback directly, if BT_GATT_ITER_STOP
is returned.
Change-Id: I7873594f5dbe6e8c5bef11bf397a74cdc870a464
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch refactor reading of attribute values as a client.
Current MTU size is taken into account to determine if read
procedure has been completed or not.
For now, read procedure will be continued until whole is read,
or stopped by client.
Core Specification says that "The Read Blob Request is repeated
until the Read Blob Response’s Part Attribute Value parameter is
shorter than (ATT_MTU – 1)." (Vol 3, Part G 4.8.3)
Because application didn't know the current MTU value,
there was no way to determine if data received is complete.
Change-Id: I9d0e3f8638b58c3a4e39060333aedc133b775e3d
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>