Commit graph

3800 commits

Author SHA1 Message Date
Carles Cufi
6048d554c9 boards: arm: degu_evk: Fix default configuration
Move conditionals that depend on USB to Kconfig.defconfig so that unmet
dependencies don't issue a warning.

Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
2020-02-04 14:57:34 -06:00
Gerson Fernando Budke
ff7f71b8e0 boards: arm: Fix sam_e70_xplained spi conf warning
The symbol SPI_SAME70_PORT_0_PIN_CS3 was defined without a type.
A non-whitelisted Kconfig warning is generated which results on a
configuration error. This associate the bool type to symbol.

Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
2020-02-04 14:55:45 -05:00
Gerson Fernando Budke
d70ad947db boards: arm: Add sam_v71_xult board
Add sam_v71_xult board files. This enable use of Atmel samv71 SoC.

Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
2020-02-04 08:56:19 -06:00
Erwan Gouriou
3fba0cb5d1 board: nucleo_l152re: Limit sysfreq to 16MHz
A bug under investigation (issue #22078) limits board operations
to 16MHz. When running at 32MHz, some applications may crash.

In order to enable use of nucleo_l152re with mot of applications,
limit frequency to 16MHz until bug is fixed.


Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2020-02-04 06:28:16 -06:00
Oane Kingma
1421dfb3f1 boards: efr32_slwstk6061a: Enable watchdog
This commit adds the following:
- EFR32FG1P SoC support for the watchdog
- efr32_slwstk6061a board support for the watchdog

Signed-off-by: Oane Kingma <o.kingma@interay.com>
2020-02-03 11:25:40 -08:00
Christian Taedcke
6b382bc9e7 boards: efr32mg_sltb004a: Enable watchdog
This commit adds the following:
- EFR32MG SoC support for the watchdog
- efr32mg_sltb004a board support for the watchdog

Signed-off-by: Christian Taedcke <hacking@taedcke.com>
2020-02-03 11:25:40 -08:00
Oane Kingma
fff0a2b5e7 dts / boards / soc: Add support for SiLabs Gecko watchdog
This commit adds the following:
- device tree bindings for Gecko watchdog driver
- EFM32PG SOC support for the watchdog driver
- EFM32PG board support for the watchdog driver
- DTS aliases for testing with default watchdog driver test

Signed-off-by: Oane Kingma <o.kingma@interay.com>
2020-02-03 11:25:40 -08:00
Peter A. Bigot
6438195701 devicetree: add voltage-divider binding
Define a binding for a voltage divider circuit with one or more analog
input channels.  Add devicetree nodes for several boards that have
battery voltage measurement support.

Signed-off-by: Peter A. Bigot <pab@pabigot.com>
2020-02-03 16:26:51 +01:00
Maureen Helm
cad729dcfb boards: Configure ft5336 touch panel on i.mx rt boards
Adds device tree nodes and configures Kconfig defaults for the ft5336
touch panel driver on mimxrt10{50,60,64}_evk boards.

Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2020-02-01 08:50:16 -05:00
Carlo Caione
0958673ee1 arch: arm64: Enable shared IRQ line for UART
Enable the shared IRQ for the UART line and enable the remaining tasks
that depends on a separated declaration of the TX/RX/Err/... IRQs.

Signed-off-by: Carlo Caione <ccaione@baylibre.com>
2020-02-01 08:08:43 -05:00
Carlo Caione
3cdead707d arch: arm64: Fix cmsis_rtos tests
The cmsis_rtos tests are failing because the stack size used by CMSIS is
too small. Customize the stack size for the aarch64 architecture and
re-enable the tests.

Signed-off-by: Carlo Caione <ccaione@baylibre.com>
2020-02-01 08:08:43 -05:00
Carlo Caione
86a60475a4 arch: arm64: Fix logging test
We need a slightly bigger stack to be able to successfully pass the
logging test. Fix the stack size and enable back the test.

Signed-off-by: Carlo Caione <ccaione@baylibre.com>
2020-02-01 08:08:43 -05:00
Carlo Caione
0d5e011be4 arch: arm64: Enable tracing
Enable the tracing hooks on the ARM64 platform and white-list the
tracing tests.

Signed-off-by: Carlo Caione <ccaione@baylibre.com>
2020-02-01 08:08:43 -05:00
Carlo Caione
54acb7baf4 arch: arm64: Support zephyr toolchain
ARM64 is a valid target for the zephyr toolchain. Add support for it.

Signed-off-by: Carlo Caione <ccaione@baylibre.com>
2020-02-01 08:08:43 -05:00
Carlo Caione
a61290e1a3 arch: arm64: Add support for qemu_cortex_a53 board
This patch introduces support for the qemu_cortex_a53 board emulated
using QEMU (virt platform) adding SoC, board and DTS files.

| ./scripts/sanitycheck -p qemu_cortex_a53
|
| Total complete:  190/ 190  100%  skipped:   40, failed:    0
| 150 of 150 tests passed (100.00%), 0 failed,
|     40 skipped with 0 warnings in 580.93 seconds

Signed-off-by: Carlo Caione <ccaione@baylibre.com>
2020-02-01 08:08:43 -05:00
Anas Nashif
1eeb6ca873 intel_s1000_crb: we not can build this with zephyr sdk
Remove warning about sdk limitation and enable zephyr sdk in sanitycheck
for this board.

Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2020-01-31 14:51:37 -05:00
Peter Bigot
39bc3e9885 boards: define Arduino SPI standard chip select for Nordic boards
Prepare for a day when all boards specify the chip select in the bus
devicetree node by making sure that the devicetree node associated
with arduino_spi uses the standard D10 pin from the arduino header as
the cs-gpios property value.

Also update the arduino tags in the board yaml files.

Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
2020-01-31 11:42:10 -05:00
Johann Fischer
7a822078fc shields: add support for GDEW075T7 display
Add support for GDEW075T7 display.

Signed-off-by: Johann Fischer <j.fischer@phytec.de>
2020-01-31 11:37:35 -05:00
Johann Fischer
e31b6a6ca2 shields: waveshare_epaper: set LVGL_BITS_PER_PIXEL to 1
Set LVGL_BITS_PER_PIXEL to 1 and reduce RAM usage.

Signed-off-by: Johann Fischer <j.fischer@phytec.de>
2020-01-31 11:37:35 -05:00
Kumar Gala
ca09a7bf07 boards: qemu_cortex_r5: remove CI workaround
Now that we have SDK 0.11.0 as default, we don't need workaround for
finding qemu.

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2020-01-30 14:23:31 -06:00
Ivo Clarysse
4ea41623ef boards: stm32f4_disco: enable canbus
Define CAN_1 and CAN_2 canbus controllers and enable CAN_2 in the ST
STM32F4 Disco development board.

Signed-off-by: Ivo Clarysse <ivo@bcdevices.com>
2020-01-30 14:27:28 -05:00
Benjamin Valentin
9a6898ae60 boards: atsame54_xpro: Add SAM E54 Xplained Pro Evaluation Kit
This adds support for the Atmel SAM E54 Xplained Pro Evaluation Kit.

Only basic functionality has been tested so far.

Signed-off-by: Benjamin Valentin <benpicco@googlemail.com>
2020-01-30 08:44:30 -06:00
Francois Ramu
dbc1d6370f boards: stm32: add nucleo board stm32g474re
This patch adds the nucleo_g474re board
         based on the stm32g474 from STMicroelectronics.

Signed-off-by: Francois Ramu <francois.ramu@st.com>
2020-01-30 08:30:15 -06:00
Christian Taedcke
089f30759a board: efm32pg_stk3402a: Add option to compile for EFM32JG12B
By default the firmware is compiled for the EFM32PG12B SoC with the ARM
Cortex-M4F core. When building for efm32pg_stk3402a_jg, The firmware is
compiled for the EFM32JG12B SoC with the ARM Cortex-M3 core.

Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
2020-01-30 07:06:54 -06:00
Scott Branden
08d2cd304a boards: arm: Add bcm958401m2 board
Add support for bcm958401m2 board.
This board use the uses the BCM58400 Valkyrie SoC.

Signed-off-by: Scott Branden <scott.branden@broadcom.com>
2020-01-30 03:54:01 -06:00
Kwon Tae-young
353fc8aac7 boards: nucleo_l152re: Enable IWDG
Enable the independent watchdog on the nucleo_l152re

Signed-off-by: Kwon Tae-young <tykwon@m2i.co.kr>
2020-01-29 11:20:57 -06:00
Kamil Lazowski
5b4f4253c1 drivers: flash: add Nordic JEDEC QSPI NOR flash driver
Most JEDEC NOR flash devices uses not only typical SPI mode
(MISO,MOSI,SCK and CS), but also QSPI mode (IO0,IO1,IO2,IO3,SCK and CS).
QSPI mode uses more data lines and as a result provide higher
throughput. If this were not enough, Nordic chips provide
hardware acceleration for read/write/erase functions, what
gives significant performance boost.
It does a lot of things "behind the scene", i.e when user has written
some data to the flash and would like to read them back, it has to wait
until the flash is ready by reading WIP bit in Status Register.
This driver does it automatically.

Signed-off-by: Kamil Lazowski <Kamil.Lazowski@nordicsemi.no>
2020-01-29 15:15:49 +01:00
Andrzej Głąbek
7899b1f5b6 modules: hal_nordic: Update nrfx to version 2.1.0
Update the hal_nordic module revision, to switch to nrfx 2.1.0.

Because the list of peripherals for nRF5340 has changed as follows:
- SPIM2 has been renamed to SPIM4
- SPIM2-3, SPIS2-3, TWIM2-3, TWIS2-3, and UARTE2-3 have been added
a couple of related corrections needed to be applied in dts and Kconfig
files, plus the spi_nrfx_spim driver has been extended with the support
for SPIM4.

Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2020-01-29 15:00:45 +01:00
Henrik Brix Andersen
cb9614fca0 boards: arm: efm32wg_stk3800: add jlink flash runner support
Add support for flashing via the Segger J-Link OB.

Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
2020-01-29 10:11:02 +01:00
Henrik Brix Andersen
58ce46ef62 boards: stm32f3_disco: enable canbus
Enable CAN1 canbus controller in the ST STM32F3 Disco development
board.

Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
2020-01-29 09:47:27 +01:00
Tomasz Bursztyka
b8e14b5b9d drivers/usb: Switching to DTS based configuration for DW driver
And applying the changes to intel_s1000_crb board as well.

Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2020-01-28 18:18:18 -05:00
Tomasz Bursztyka
e33432fd44 drivers/dma: Rename CAVS driver to DesignWare
There is no such thing as CAVS DMA IP block, the DMA IP block found on
CAVS based chips is made with DesignWare one.

This will help to centralize DW based DMA device into one driver.

Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2020-01-28 18:18:18 -05:00
Yasushi SHOJI
db74b949b0 boards: posix: Fix a typo
It's a trivial fix for a typo in the comment.

Signed-off-by: Yasushi SHOJI <y-shoji@ispace-inc.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2020-01-28 15:44:21 -05:00
Sean Nyekjaer
bf8d0f3802 boards: atsamd20_xpro: add cs-gpio for one spi device
The samd20 does not have hardware support for controlling the SS pin.
Declare a cs-gpio to be able to use the SS pin for samd20 xplained pro
board.

Signed-off-by: Sean Nyekjaer <sean@geanix.com>
2020-01-28 12:55:51 -06:00
Sean Nyekjaer
1a46cddd2a boards: atsamd20_xpro: fix sercom muxing sercom0
This will make the pinout described in the samd20 xplained pro
documentation valid.

Signed-off-by: Sean Nyekjaer <sean@geanix.com>
2020-01-28 12:55:51 -06:00
Kuba Sanak
018bf777e7 boards: arm: Make Adafruit boards use their DT-defined code partion.
Adafruit Feather M0 and Adafruit Trinket M0 boards aren't set up
to use their defined flash partition table to generate the 0x2000
flash offset for code. This should be enabled by default as the
boards ship with a write-protected bootloader and code should be
flashed where it expected by default.

Signed-off-by: Kuba Sanak <contact@kuba.fyi>
2020-01-28 12:49:25 -06:00
Jonas Eriksson
8c59af0807 boards: arm: Add stm32vl_disco support
Port based on existing stm32f3_disco and nucleo_f103rb boards.

Signed-off-by: Jonas Eriksson <jonas@upto.se>
2020-01-28 08:30:52 -06:00
Ulf Magnusson
cf89ba33ea global: Fix up leading/trailing blank lines in files
To make the updated test in
https://github.com/zephyrproject-rtos/ci-tools/pull/121 clean, though it
only checks modified files.

Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2020-01-27 17:41:55 -06:00
Erwan Gouriou
f44b120449 boards: nucleo_wb55rg: Add openocd support and set to default runner
Flashing stm32wb SoCs is available since Zephyr SDK-0.11.0.
Enables it on nuclmeo_wb55rg and set it as default as it is
faster in flashing and support doesn't require additional
action (vs pyocd package support).

Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2020-01-27 15:26:25 -06:00
Alexander Wachter
2f44990e9b can: Introduce can-primary alias
This commit introduces the can-primary alias to identify
the primary CAN interface.
This alias is used for all samples and tests, so they don't
need to probe the right interface.

Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
2020-01-27 10:25:00 -06:00
Anas Nashif
d380622a4d mec1501modular: allow building on macOS
Do not abort build on macOS if SPI utility is not found.

Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2020-01-27 00:11:10 -05:00
Peter Bigot
4549d379da treewide: use full path to pinmux.h header
The build infrastructure should not be adding the drivers subdirectory
to the include path.  Fix the legacy uses that depended on that
addition.

Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
2020-01-26 17:52:12 +01:00
Peter Bigot
74dd12bd7f treewide: use full path to gpio.h header
The build infrastructure should not be adding the drivers subdirectory
to the include path.  Fix the legacy uses that depended on that
addition.

Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
2020-01-26 17:52:12 +01:00
Ulf Magnusson
92529da116 kernel: kconfig: Fix broken references to TICKLESS_KERNEL
The CONFIG_ prefixes were missing on these.

Found with a work-in-progress scripts/kconfig/lint.py check.

This symbol is defined in kernel/Kconfig.

Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2020-01-25 08:14:55 -05:00
Armando Visconti
8dbe9806ff drivers/i2c: Kconfig.stm32: Enable interrupts usage by default
I2C interrupts usage should be the preferred way. This commit
enables them by default in the STM32 I2C driver itself.

Signed-off-by: Armando Visconti <armando.visconti@st.com>
2020-01-24 21:34:45 -05:00
Ulf Magnusson
d28e1f6bcb kconfig: Turn pointless 'menuconfig's into 'config's
Same deal as in commit 677f1e6 ("config: Turn pointless/confusing
'menuconfig's into 'config's"), for a newly-introduced stuff.

Also clean up headers to be consistent with recent cleanups.

Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2020-01-24 21:30:17 -05:00
Maksim Masalski
e31199a3d4 docs: mec15xxevb assy6853 updated sequence events
During the first real test of my manual by another developer,
I found out that it would be better to update sequence of events.
Also found out misprints, and some actions was not so obvious.
Corrected manual to be more green developers friendly.

Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
2020-01-24 16:59:03 -08:00
Julien D'ascenzio
c70702ce43 boards: arm: nucleo_l452re: fix USART2 RX pin
Correct the RX pin of USART2 in nucleo_l452re.
It was set to PA15 instead of PA3

Signed-off-by: Julien D'ascenzio <julien.dascenzio@paratronic.fr>
2020-01-24 10:57:44 -06:00
Julien D'ascenzio
b6b20421fa boards: arm: nucleo_l452re: add user button
Add the user button to the device tree of nucleo_l452re board.
This button is wire to the pin PC13 of STM32L452

Signed-off-by: Julien D'ascenzio <julien.dascenzio@paratronic.fr>
2020-01-24 10:57:44 -06:00
Oane Kingma
c52787c4d1 boards/arm: Add initial support for SiLabs Giant Gecko GG11 STK
This commit adds initial support for the Silicon Labs EFM32
Giant Gecko GG11 StarterKit.

Features supported for now are NVIC, SysTick, GPIO, Flash,
Counter, I2C, UART and Ethernet. Support for Watchdog and
ADC will follow as soon as their respective PRs are merged.

Signed-off-by: Oane Kingma <o.kingma@interay.com>
2020-01-24 10:28:33 -06:00
Robert Lubos
e93ccd9973 boards: qemu_x86: Add ieee802154 capability
Extend `qemu_x86` board configuration with `ieee802154` capability, to
allow it to execute `ieee802154` tests.

Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
2020-01-22 11:57:11 -06:00
Robert Lubos
65ec2d9701 boards: nrf52811_pca10056: Enable nRF 802.15.4 driver by default
nrf52811_pca10056 board should enable nRF 802.15.4 radio driver
automatically when 802.15.4 subsystem is enabled, as other Nordic
802.15.4-compliant boards do.

Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
2020-01-22 14:58:40 +01:00
Henrik Brix Andersen
46ac596ee6 boards: arm: frdm_k64f: list counter support
Add counter to the list of supported features for the NXP FRDM-K64F
development board.

Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
2020-01-22 06:27:30 -06:00
Andy Ross
74c582dc06 Revert "x86: qemu_x86_64: workaround SMP issues in x86"
Races seem fixed, at least the ones measurable by existing tests.

This reverts commit 3f3c72a911.

Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
2020-01-21 14:47:52 -08:00
Andrzej Puzdrowski
5f89145d6b boards: remove NFFS mentions from comments/doc
Replaced NFFS mentions by LittleFS in all <board>.dts comments
to storage partitions.
Replaced NFFS by LittleFS in a few boards documentation.

Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
2020-01-21 15:32:47 +01:00
Antony Pavlov
f144e39ced boards: arm: add initial support for NUCLEO-L152RE board
The board features a STM32L152RET6 MCU.

Tested samples:

    * hello_world
    * basic/blinky
    * basic/button
    * gui/lvgl + SHIELD=ssd1306_128x64
    * philosophers
    * sensor/hmc5883l
    * subsys/shell/shell_module + CONFIG_EEPROM_SHELL=y
    * synchronization

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
2020-01-20 18:08:43 -06:00
Johann Fischer
12435e5e6c shields: remove link board can
Remove link board can, shield was discontinued in
prototype status and will be replaced by a successor.

Signed-off-by: Johann Fischer <j.fischer@phytec.de>
2020-01-20 11:50:48 -05:00
Daniel Leung
549fdb9ec9 i2c: mchp_xec: define driver instaces based on device tree...
...instead of kconfig.

This provides a bit more flexibility in defining driver
instances. Also, since the DTS defines 5 I2C controllers,
the driver code is extended to cover all 5 if the controllers
are enabled.

Signed-off-by: Daniel Leung <daniel.leung@intel.com>
2020-01-18 13:33:20 -05:00
Daniel Leung
6ecb36cbe0 dts: arm: mec1501hsz: rename I2C nodes
The I2C controllers on the MEC1501 SoC can be attached to
different I2C output line. For example, the I2C #0 controller
can be used with I2C7 physical lines out of SoC. The output
selection is done by the attribute "port_sel". This renames
the parent I2C nodes on the SoC side to refer to
the controller themselves instead of the output lines to
avoid confusion. The labels of these nodes are also renamed
to reflect the controllers.

On the board level, the DTS labels are overwritten to indicate
the actual output lines.

Aliases are also provided in both SoC and board levels to
provide shortcuts to the DTS nodes.

Signed-off-by: Daniel Leung <daniel.leung@intel.com>
2020-01-18 13:33:20 -05:00
Kumar Gala
b1602c8e39 arm: Removed support for CC2650
The SoC, driver, and board support for the CC2650 and CC2650 Sensortag
aren't currently supported and we are removing them as such.  If anyone
is interesting in supporting this platform we can easily recovery it
from git.

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2020-01-18 09:27:55 -06:00
Andrew Boie
e34f1cee06 x86: implement kernel page table isolation
Implement a set of per-cpu trampoline stacks which all
interrupts and exceptions will initially land on, and also
as an intermediate stack for privilege changes as we need
some stack space to swap page tables.

Set up the special trampoline page which contains all the
trampoline stacks, TSS, and GDT. This page needs to be
present in the user page tables or interrupts don't work.

CPU exceptions, with KPTI turned on, are treated as interrupts
and not traps so that we have IRQs locked on exception entry.

Add some additional macros for defining IDT entries.

Add special handling of locore text/rodata sections when
creating user mode page tables on x86-64.

Restore qemu_x86_64 to use KPTI, and remove restrictions on
enabling user mode on x86-64.

Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
2020-01-17 16:17:39 -05:00
Ulf Magnusson
4e85006ba4 dts: Rename generated_dts_board*.{h,conf} to devicetree*.{h,conf}
generated_dts_board.h is pretty redundant and confusing as a name. Call
it devicetree.h instead.

dts.h would be another option, but DTS stands for "devicetree source"
and is the source code format, so it's a bit confusing too.

The replacement was done by grepping for 'generated_dts_board' and
'GENERATED_DTS_BOARD'.

Two build diagram and input-output SVG files were updated as well, along
with misc. documentation.

hal_ti, mcuboot, and ci-tools updates are included too, in the west.yml
update.

Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2020-01-17 17:57:59 +01:00
Ulf Magnusson
a8fe2964ee boards: kconfig: Fix enabling USE_SEGGER_RTT for various boards
HAS_SEGGER_RTT is assigned by various Nordic boards, but assignments
have no effect on promptless symbols. This symbol is enabled through
being select'ed by SOC_SERIES_NRF52X.

Holyiot, nRF52833-PCA10100, nRF52840-PCA10056, and nRF52-PCA10040 only
assign HAS_SEGGER_RTT without assigning USE_SEGGER_RTT. They probably
meant to enable USE_SEGGER_RTT, so do that instead.

Also add a help text to HAS_SEGGER_RTT and a warning re. HAS_SEGGER_RTT
vs. USE_SEGGER_RTT to the documentation.

Flagged by https://github.com/zephyrproject-rtos/zephyr/pull/20742.

Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2020-01-17 17:03:40 +01:00
Maksim Masalski
12e7295307 docs: error in mec15xxevb assy6853 in set up manual
Error in that manual.
Header JP39 should have connected jumpers 1-2, 3-4.
In docs I wrote that is to make sure JP39 does not have any jumper.

Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
2020-01-17 08:32:17 -05:00
Henrik Brix Andersen
f8acb3f52d boards: frdm_k64f: enable internal temperature sensor
Enable the internal SoC temperature sensor driver.

Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
2020-01-16 17:30:42 -06:00
Henrik Brix Andersen
dc2c04b243 boards: twr_ke18f: enable internal temperature sensor
Enable the internal SoC temperature sensor driver.

Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
2020-01-16 17:30:42 -06:00
Roland Ma
b0bdf91e11 boards: arm: Add board definition for stm32 nucleo_f767zi
Added board definition additions for stm32 nucleo_f767zi
board.

Signed-off-by: Roland Ma <rolandma@yahoo.com>
2020-01-16 22:51:13 +01:00
Roland Ma
01049b73be dts: arm: st: Add dts and soc additions for stm32 F767ZI board
Added dts additions for stm32 nucleo f767zi board, also added
and modified soc addtions for thet board.
Updated dts reference file name.
Updated yaml to take out adc for now.

Signed-off-by: Roland Ma <rolandma@yahoo.com>
2020-01-16 22:51:13 +01:00
Ulf Magnusson
c935c26819 boards: x86: minnowboard: Do not assign promptless X86_NO_SPECTRE_V4
Assignments to promptless symbols have no effect. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.

From looking at
http://www.mouser.com
  /catalog/specsheets/CircuitCO_595-MINNOWMAX-DUAL%20Data%20Sheet.pdf
, this board uses an Intel Atom E3815 or an Intel Atom E3825 CPU.

Both of those CPUs are listed as vulnerable to all three variants of
Meltdown and Spectre in
https://www.techarp.com/guides/complete-meltdown-spectre-cpu-list/6/.

All the X86_NO_SPECTRE_V* symbols default to n (and it seems nothing
turns them on at the moment), so just remove the assignment, which will
be a no-op.

Also remove the comment re. Spectre V4, as it seems this board is
vulnerable to more than that, though I could've missed something.

Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2020-01-16 14:34:19 -05:00
Andrei Gansari
85800622f9 dts: remove artificial include
DTS inclusion simplification for LPC55S69 cpu 0.

Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
2020-01-16 08:19:46 -06:00
Erwan Gouriou
cbe6edcfa7 boards: nucleo_f207zg: Enable automatic flashing
Flashing board nucleo_f207zg requires additional instructions
to be provided to openocd in order to enable flashing without holding
the reset button.
Update nucleo_f207zg openocd config to provide requested instructions.


Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2020-01-16 07:52:12 -06:00
Ioannis Glaropoulos
86a1cc78c2 boards: arm: nrf5340_dk: include soc.h in nrf5340_cpunet_reset.c
We need to include soc.h in nrf5340_cpunet_reset.c, to include
the nRF5340 device headers. Fixes a compilation error when we
build with CONFIG_ARM_MPU=n.

Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
2020-01-16 07:37:12 -06:00
Gerson Fernando Budke
3d5c911612 board: atsamr21_xpro: Update docs
Add reference to wpanusb and wpan_serial examples. This links user with
some IEEE 802.15.4 applications.

Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
2020-01-16 10:47:10 +02:00
Ulf Magnusson
5c1a3fd6f7 boards: cc322xsf_launchxl: Do not assign promptless HAS_CC3220SDK sym
Assignments have no effect on promptless symbols. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.

This symbol is (always) selected, in
soc/arm/ti_simplelink/cc32xx/Kconfig.soc.

Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2020-01-15 18:02:48 -05:00
Ulf Magnusson
f200e76773 boards: kconfig: Do not assign promptless SOC_FAMILY_TISIMPLELINK
Assignments have no effect on promptless symbols. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.

This symbol is selected by the SOC_SERIES_CC13X2_CC26X2,
SOC_SERIES_CC2650, SOC_SERIES_CC32XX, and SOC_SERIES_MSP432P4XX symbols.

Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2020-01-15 18:01:26 -05:00
Ulf Magnusson
d6b19611c3 boards: kconfig: Do not assign promptless SOC_FAMILY_EXX32
Assignments have no effect on promptless symbols. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.

This symbol is selected by the SOC_SERIES_EFM32HG,
SOC_SERIES_EFM32PG12B, SOC_SERIES_EFM32WG, SOC_SERIES_EFR32FG1P, and
SOC_SERIES_EFR32MG12P symbols.

Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2020-01-15 18:01:00 -05:00
Anas Nashif
3f3c72a911 x86: qemu_x86_64: workaround SMP issues in x86
We have some races causing random failures with this platform, set cpu
number to one while we investigate and fix the issue.

Related to #21317

Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2020-01-15 12:05:44 -05:00
Ulf Magnusson
a3f97e853e boards: cy8ckit: kconfig: Do not assign promptless SOC_FAMILY_PSOC6
Assignments have no effect on promptless symbols. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.

This symbol is selected by SOC_SERIES_PSOC62, in
soc/arm/cypress/psoc6/Kconfig.series.

Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2020-01-15 11:31:34 -05:00
Ulf Magnusson
aa6178b777 boards: stm32: kconfig: Do not assign promptless SOC_FAMILY_STM32
Assignments have no effect on promptless symbols. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.

This symbol is enabled through being select'ed by other symbols.

Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2020-01-14 16:48:35 -05:00
Ulf Magnusson
cfe946d683 boards: sam: kconfig: Do not assign promptless SOC_FAMILY_SAM symbol
Assignments have no effect on promptless symbols. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.

This symbol is enabled through being selected by SOC_SERIES_SAM3X,
SOC_SERIES_SAM4S, and SOC_SERIES_SAME70.

Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2020-01-14 16:48:12 -05:00
Ulf Magnusson
ba84c45926 boards: exp432p401r: Do not assign promptless HAS_MSP432P4XXSDK symbol
Assignments have no effect on promptless symbols. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.

This symbol is enabled through being selected by SOC_MSP432P401R, in
soc/arm/ti_simplelink/msp432p4xx/Kconfig.soc.

Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2020-01-14 16:46:53 -05:00
Ulf Magnusson
a30c2f7014 boards: stm32: kconfig: Do not assign promptless ENTROPY_HAS_DRIVER
Assignments have no effect on promptless symbols. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.

The removed lines may look like just comments, but they're equivalent to
CONFIG_ENTROPY_HAS_DRIVER=n. Search for "is not set" in
https://docs.zephyrproject.org/latest/guides/kconfig/setting.html for an
explanation.

Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2020-01-14 16:46:10 -05:00
Ulf Magnusson
8f8f69e283 boards: kconfig: Do not assign promptless SERIAL_HAS_DRIVER
Assignments have no effect on promptless symbols. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.

This symbol is enabled through being selected by other symbols.

Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2020-01-14 16:35:26 -05:00
Ulf Magnusson
5d6168f9c6 boards: minnowboard: kconfig: Do not assign promptless CPU_ATOM symbol
Assignments have no effect on promptless symbols. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.

This symbol is enabled through being selected by SOC_ATOM in
soc/x86/atom/Kconfig.soc.

Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2020-01-14 16:34:25 -05:00
Kwon Tae-young
404aaec44d boards: nucleo_l053r8: Added EEPROM support
EEPROM support in the L0 Series has been tested on nucleo_l053r8 boards.

Signed-off-by: Kwon Tae-young <tykwon@m2i.co.kr>
2020-01-14 11:13:42 -05:00
Johann Fischer
ea3003eb28 shields: ssd1306: add table with supported displays
Add table with supported displays..

Signed-off-by: Johann Fischer <j.fischer@phytec.de>
2020-01-14 11:06:57 -05:00
Johann Fischer
b2f5a02f04 shields: ssd1306: add support for SH1106 based 128x64 display
Add support for SH1106 based 128x64 pixel display.

Signed-off-by: Johann Fischer <j.fischer@phytec.de>
2020-01-14 11:06:57 -05:00
Brett Witherspoon
6564fd8a84 boards: shields: add TI BOOSTXL-ULPSENSE
This shield adds analog and digital sensors to a TI LaunchPad
development kit. Currently only the ADXL362 accelerometer is supported.
This is useful for exercising the SPI interface. The analog sensors will
be useful if we add support for the sensor controller and ADC in the
future.

Signed-off-by: Brett Witherspoon <spoonb@cdspooner.com>
2020-01-14 15:45:35 +01:00
Brett Witherspoon
71952fb92f boards: cc1352r1_launchxl / cc26x2r1_launchxl: add BoosterPack connector
Add BoosterPack connector information to the DTS of the CC1352 and
CC26x2 LaunchPad boards. This allows shields (e.g. BoosterPacks) to use
aliases for the connector interfaces and mappings for the GPIOs. This is
similar to what is being done for the Arduino connectors.

Signed-off-by: Brett Witherspoon <spoonb@cdspooner.com>
2020-01-14 15:45:35 +01:00
Ulf Magnusson
59832ffa0a boards: arm: nxp_imx: kconfig: Do not assign promptless SOC_FAMILY_IMX
Assignments have no effect on promptless symbols. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.

This symbol is enabled through being select'ed by SOC_SERIES_IMX_6X_M4,
SOC_SERIES_IMX7_M4, and SOC_SERIES_IMX_RT.

Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2020-01-14 15:44:34 +01:00
Ulf Magnusson
6608beaaaa console: kconfig: Do not assign promptless CONSOLE_HAS_DRIVER
Assignments have no effect on promptless symbols. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.

These configuration files all enable UART_CONSOLE, which selects
CONSOLE_HAS_DRIVER.

Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2020-01-14 15:42:33 +01:00
Ulf Magnusson
8c7da445d0 boards: arm: kconfig: Do not assign promptless CPU_HAS_FPU
Assignments have no effect on promptless symbols. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.

CPU_HAS_FPU is enabled through being selected by other symbols.

Also enable floating point support for MSP-EXP432P401R. Manivannan
Sadhasivam says it might've been overlooked, in
https://github.com/zephyrproject-rtos/zephyr/pull/21897.

Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2020-01-14 15:40:29 +01:00
Martí Bolívar
c82cd7c074 boards: bbc_microbit: add nrfjprog flash support
Segger offers J-Link firmware for the debug MCU on the BBC micro:bit.
If this firmware is installed, it allows programming via nrfjprog and
JLink. Add support for this in the board.cmake.

Leave the default at pyocd, to support the factory-programmed
firmware.

With this patch, users who have installed the JLink firmware can flash
this board with nrfjprog using:

$ west flash -r nrfjprog

And can flash or debug with jlink using:

$ west flash -r jlink
$ west debug -r jlink

As usual with runner overrides, you can omit the '-r {nrfjprog,jlink}'
if BOARD_FLASH_RUNNER as a CMake variable is set to nrfjprog or
BOARD_DEBUG_RUNNER is set to jlink.

For more details on this Segger firmware, see:

https://www.segger.com/products/debug-probes/j-link/models/other-j-links/bbc-microbit-j-link-upgrade/

Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
2020-01-13 22:39:20 +01:00
Andrew Boie
808cca0efb x86: disable usermode on 64-bit unless no meltdown
KPTI is still work-in-progress on x86_64. Don't allow
user mode to be enabled unless the SOC/board configuration
indicates that the CPU in use is invulnerable to meltdown
attacks.

Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
2020-01-13 16:35:10 -05:00
Ulf Magnusson
d3c525b986 boards: Kconfig: SAM: Do not assign promptless SOC_FAMILY_SAM0 symbol
Assignments have no effect on promptless symbols. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.

This symbol is enabled through being select'ed.

Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2020-01-13 14:19:48 -05:00
Antony Pavlov
cc8290f588 boards: arm: nucleo_f030r8: doc: fix st.com refs
* fix Nucleo F030R8 website ref
  * add STM32F030 data sheet ref
  * use https instead of http

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
2020-01-13 11:33:43 -05:00
Maureen Helm
88fcded3b0 dts: boards: Define dts aliases at soc level for lpc socs
Defines device tree aliases for on-chip peripherals at the soc level
instead of the board level for all lpc socs. The eliminates some
duplicate code in the board level device trees, and will allow drivers
to use device-tree generated macros directly instead of through dts
fixups.

Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2020-01-13 10:22:44 -05:00
Maureen Helm
ecd24bccd1 dts: boards: Define dts aliases at soc level for i.mx 6/7 socs
Defines device tree aliases for on-chip peripherals at the soc level
instead of the board level for all i.mx 6/7 socs. The eliminates some
duplicate code in the board level device trees, and will allow drivers
to use device-tree generated macros directly instead of through dts
fixups.

Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2020-01-13 10:22:44 -05:00
Maureen Helm
201f8897cd dts: boards: Define dts aliases at soc level for i.mx rt socs
Defines device tree aliases for on-chip peripherals at the soc level
instead of the board level for all i.mx rt socs. The eliminates some
duplicate code in the board level device trees, and will allow drivers
to use device-tree generated macros directly instead of through dts
fixups.

Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2020-01-13 10:22:09 -05:00
Vincent Wan
ce90e24d25 kconfig: deprecate TI cc2650_sensortag and cc2650 SoC
Adding Kconfig settings to warn anyone trying to build for this
platform of its pending deprecation in 2.2.0.

Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
2020-01-13 10:21:12 -05:00
Vincent Wan
a2bc514653 boards: Kconfig: rename BOARD_DEPRECATED to BOARD_DEPRECATED_RELEASE
Renaming this Kconfig option given it corresponds to a version string
for a particular release.

Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
2020-01-13 10:21:12 -05:00
Henrik Brix Andersen
89d23e891a Revert "boards: nxp: pinmux: enable ftm pwm outputs based on DT_INST_* defines"
The DT_INST_* defines for the PWM controllers enabled in the device
tree are always defined causing the LED pins to always be set as PWM
outputs in the pinmux. Revert to using CONFIG_PWM_* for pinmux
configuration for now.

This reverts commit eb42a24dc6.

Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
2020-01-13 09:14:12 -06:00
Henrik Brix Andersen
9c52a3f189 boards: riscv: rv32m1_vega: document PWM support
Document PWM support for the OpenISA RV32M1 VEGAboard.

Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
2020-01-13 09:12:34 -06:00
Henrik Brix Andersen
030ea45ab3 boards: riscv: rv32m1_vega: enable PWM support for the RGB LED
Enable PWM support for the onboard RGB LED present on the OpenISA
RV32M1 VEGAboard.

Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
2020-01-13 09:12:34 -06:00
Maureen Helm
519661748e dts: boards: Define dts aliases at soc level for kinetis socs
Defines device tree aliases for on-chip peripherals at the soc level
instead of the board level for all kinetis socs. The eliminates some
duplicate code in the board level device trees, and will allow drivers
to use device-tree generated macros directly instead of through dts
fixups.

Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2020-01-13 08:30:53 -06:00
Ulf Magnusson
7a3f7e02d2 boards: litex_vexriscv: Remove unused /chosen/zephyr,timer property
Added in commit f9efca4b4f ("boards: riscv32: add LiteX VexRiscV
board"), never used.

Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2020-01-13 13:48:48 +01:00
Henrik Brix Andersen
a809878365 boards: arm: reel_board: add spi cs gpio
Add SPI CS GPIO line to reel_board device tree. This is needed to make
the board work with Arduino SPI compatible shields.

Tested on reel_board (1507.1) and reel_board_v2 (1507.2).

Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
2020-01-13 12:50:43 +01:00
Ioannis Glaropoulos
e53be989e7 soc: arm: nrf5340: move shared SRAM to the upper part of App MCU SRAM
We move the SRAM partition that is used as shared memory with
the Network MCU to the upper part of the Application MCU
memory. In this case we can allocate all lower SRAM to the
application, if we are building a Zephyr image without
support for Trusted Execution.

Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
2020-01-13 12:48:46 +01:00
Ioannis Glaropoulos
7175896a77 soc: arm: nrf5340: introduce and define SRAM partitions for APP MCU
With this commit we introduce SRAM partitioning for nRF5340
Application MCU. We define fixed partitions for the Secure
and the Non-Secure images, when building with trusted
execution environment enabled (Secure and Non-Secure images).

For (Secure image) builds without trusted execution environment
enabled we now allocate all available Application MCU SRAM into
the single image, except for the SRAM being used as shared memory
with the Network MCU.

Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
2020-01-13 12:48:46 +01:00
Kwon Tae-young
f2c345a407 boards: arm: 96b_wistrio: Use stm32flash runner
Now that stm32flash runner is available, let's use it.

Signed-off-by: Kwon Tae-young <tykwon@m2i.co.kr>
2020-01-13 12:25:12 +01:00
Martin Jaeger
ca795434c9 boards: nucleo_g431rb: Default serial port fixed
The virtual COM port of the STlink in the Nucleo board is connected to
LPUART1, but the board was configured to use UART1 instead. For this
reason, hello world sample did not work.

In addition to that, PA2 was assigned to both LPUART1 and UART2. UART2
TX is now muxed to PA14.

Signed-off-by: Martin Jaeger <17674105+martinjaeger@users.noreply.github.com>
2020-01-13 12:03:28 +01:00
Erwan Gouriou
d9e6009a73 boards: nucleo_g071rb: Enable comman line flashing using pyocd
On nucleo_g071rb, flashing using pyocd requested to hold reset button
during flashing operation.
Using newly available pyocd arguments this is no more needed and
nucleo_g071rb can now be flashed in a fully automated way.

Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2020-01-13 11:49:57 +01:00
Christian Taedcke
20aa2bcf05 boards: efr32_slwstk6061a: Add support for spi nor flash
This commit adds support for the on-board flash MX25R8035F that is
directly connected to the efr32fg soc.

Signed-off-by: Christian Taedcke <hacking@taedcke.com>
2020-01-10 07:14:35 -06:00
Christian Taedcke
0201d182a8 boards: efr32mg_sltb004a: Add support for spi nor flash
This commit adds support for the on-board flash MX25R8035F that is
directly connected to the efr32mg soc.

Signed-off-by: Christian Taedcke <hacking@taedcke.com>
2020-01-10 07:14:35 -06:00
Ryan QIAN
ef537c272f boards: arm: mimxrt1010_evk: Extend usb device support
- extend usb device support for mimxrt1010_evk

Signed-off-by: Ryan QIAN <jianghao.qian@nxp.com>
2020-01-09 16:29:22 -06:00
Ryan QIAN
b734287c4e boards: arm: add board support for mimxrt1010_evk
Add board support files for mimxrt1010_evk, the development board for
i.MXRT1010 (CM7) SoC.

- Add pinmux, dts and doc.
- Tested samples: hello_world, philosophers, synchronization,
basic/blinky, basic/button.

Signed-off-by: Ryan QIAN <jianghao.qian@nxp.com>
2020-01-09 16:29:22 -06:00
Laczen JMS
ab3ed439c8 drivers: eeprom: Unified simulator and native_posix
EEPROM simulator and native_posix have been unified to one solution,
the old eeprom,native_posix is removed.

Signed-off-by: Laczen JMS <laczenjms@gmail.com>
2020-01-09 20:28:19 +01:00
Laczen JMS
20623dfa4c drivers: eeprom: Add support for eeprom simulator
Add support for a eeprom simulator. The PR limits the addition to
qemu_x86 but it can easily be added to other devices by defining the
eeprom simulator in the dts and setting 'CONFIG_EEPROM_SIMULATOR=y'

Signed-off-by: Laczen JMS <laczenjms@gmail.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2020-01-09 20:28:19 +01:00
Henrik Brix Andersen
ade6bb24e8 boards: shields: lmp90100_evb: add TI LMP90100 EVB shield
Add shield definition for the Texas Instruments LMP90100 Sensor Analog
Frontend (AFE) Evaluation Board (EVB).

Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
2020-01-09 17:27:52 +01:00
Johann Fischer
0c9109523e reel_board: enable SPI and display controller driver by default
Enable SPI and display controller driver by default.

Signed-off-by: Johann Fischer <j.fischer@phytec.de>
2020-01-08 17:55:19 -06:00
Frank Li
f6f9e6b00e boards: mm_swiftio: add board support for SwiftIO
Add new board to support SwiftIO

Signed-off-by: Frank Li <lgl88911@163.com>
2020-01-08 17:44:02 -06:00
Robert Winkler
0b6c18bd64 boards: litex_vexriscv: Enable LiteX PWM driver
This commit enables LiteX PWM driver for litex_vexriscv board.

Signed-off-by: Robert Winkler <rwinkler@internships.antmicro.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
2020-01-08 11:04:36 +01:00
Robert Winkler
34fedd6cc9 boards: litex_vexriscv: Enable LiteX I2C driver
This commit enables LiteX I2C driver for litex_vexriscv board.

Signed-off-by: Robert Winkler <rwinkler@internships.antmicro.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
2020-01-07 20:55:43 +01:00
Henrik Brix Andersen
85e1117e94 dts: nxp: kinetis-ftm: add PWM flags cell
Add support for specifying PWM flags for the NXP Kinetis FlexTimer
(FTM) PWM driver through the device tree.

All in-tree clients of this PWM controller are active-low LEDs.

Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
2020-01-07 18:13:18 +01:00
Ulf Magnusson
def1f0e2d5 devicetree: Remove DT_SRAM_{BASE_ADDRESS,SIZE}, use CONFIG_* versions
The SRAM address and size are currently available as both
DT_SRAM_{BASE_ADDRESS,SIZE} and as CONFIG_SRAM_{BASE_ADDRESS,SIZE} (via
the Kconfig preprocessor).

Use the CONFIG_SRAM_* versions everywhere, and remove generation of the
DT_SRAM_* versions from gen_defines.py.

The Kconfig symbols currently depend on 'ARC || ARM || NIOS2 || X86'.
Not sure why, so I removed it.

It looks like no configuration files set CONFIG_SRAM_* at the moment, so
another option might be to use the DT_* symbols everywhere instead. Some
Kconfig.defconfig.series files add defaults to them though.

Also improve the help texts for CONFIG_SRAM_* to say that they normally
come from devicetree rather than configuration files.

Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2020-01-07 17:19:36 +01:00
Stephanos Ioannidis
1c9942461d boards: qemu_cortex_r5: Remove ignore tags for working tests
This commit removes the ignore tags for the tests that work after the
changes in the PR #20267.

In the future, this ignored testing tag list will be further reduced
as critical bugs for the qemu_cortex_r5 platform are addressed
(see #20217).

Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
2020-01-07 17:17:12 +01:00
Stephanos Ioannidis
09ee834b4c soc: arm: xilinx_zynqmp: Refactor for multi-arch support.
The Xilinx ZynqMP SoC embeds both Cortex-R "RPU" and Cortex-A "APU"
cores.

Since the current Zephyr architecture cannot support AMP of Cortex-R
and Cortex-A within the same project, the RPU and APU should be
considered separate platforms and handled accordingly.

This commit re-purposes the SOC_XILINX_ZYNQMP symbol as a helper symbol
indicating that Xilinx ZynqMP SoC is used, and adds a new symbol,
SOC_XILINX_ZYNQMP_RPU, for specifying the actual build target platform.

When Cortex-A support is added in the future, SOC_XILINX_ZYNQMP_APU
symbol should be added and used to conditionally handle APU-specific
code.

For more details, refer to the issue #20217.

Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
2020-01-07 17:17:12 +01:00
Stephanos Ioannidis
8a29685a25 dts: xilinx_zynqmp: Refactor dts to specify RPU and APU separately.
ZynqMP SoC embeds two separate processor types: Cortex-R for RPU and
Cortex-A for APU.

Since the current Zephyr architecture cannot support AMP of Cortex-R
and Cortex-A within one project, the RPU and APU should be considered
separate platforms.

This commit relocates the device tree nodes that are not common between
RPU and APU to a separate dtsi file (zynqmp_rpu.dtsi).

When Cortex-A53 APU support is added in the future, an additional dtsi
file (zynqmp_apu.dtsi) for specifying the APU device tree should be
added.

For more details, refer to the issue #20217.

Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
2020-01-07 17:17:12 +01:00
Daniel Leung
7185670066 boards: intel_s1000_crb/doc: update XCC install instructions
This updates the toolchain installation instructions for
the newer RI-2018.0 version of XCC.

Signed-off-by: Daniel Leung <daniel.leung@intel.com>
2020-01-07 17:09:38 +01:00
Daniel Leung
01cc804d76 boards: intel_s1000_crb: ignore net/bluetooth for testing
The board does not support networking and bluetooth so there
is no need to test these.

Signed-off-by: Daniel Leung <daniel.leung@intel.com>
2020-01-07 17:09:38 +01:00
Antony Pavlov
88c09a8156 boards: stm32f030_demo: reduce kernel memory usage
Based on this commit

  | commit dd6186f299
  | Author: Bobby Noelte <b0661n0e17e@gmail.com>
  | Date:   Sat Sep 30 18:24:46 2017 +0200
  |
  |     boards: nucleo_f030r8: reduce kernel memory usage
  |
  |     nucleo_f030r8 fails in CI because applications need
  |     more RAM.
  |
  |     Reduce kernel memory used by stacks and ISR vector table.
  |
  |     Fixes #3923

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
2020-01-07 08:15:34 -06:00
Antony Pavlov
f1bf04ade8 boards: stm32f030_demo: Set pinmux.c compilation under switch CONFIG_PINMUX
Based on this commit

  | commit e1de4cf6b5
  | Author: Alexandre Bourdiol <alexandre.bourdiol@st.com>
  | Date:   Thu Jun 6 15:47:23 2019 +0200
  |
  |     boards: Set pinmux.c compilation under switch CONFIG_PINMUX
  |
  |     Fix compilation issue for STM32 boards with CONFIG_PINMUX=n
  |     Fixes #16177

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
2020-01-07 08:15:34 -06:00
Antony Pavlov
276c26b01a boards/arm: dts: fix formatting
Replace spaces by tabs. Drop extra empty lines.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
2020-01-07 08:46:26 -05:00
Jan Van Winkel
6c5477dd3f boards/shields: st7789v: Use conditional Kconfig
Use conditional Kconfig, as introduced by PR #20934, for ST7789V
based shields.

Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
2020-01-06 14:25:00 -05:00
Andrei Emeltchenko
e8da2b80f9 doc: native_posix: Add mention about virtual USB
Add information and link to Virtual USB controller.

Fixes #13232.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
2020-01-06 13:57:36 -05:00
Pawel Czarnecki
65b47118c5 boards: litex_vexriscv: Enable LiteX PRBS driver
This enables LiteX PRBS random number generator driver
for litex_vexriscv board.

Signed-off-by: Pawel Czarnecki <pczarnecki@internships.antmicro.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
2020-01-06 13:33:25 -05:00
Henrik Brix Andersen
eb42a24dc6 boards: nxp: pinmux: enable ftm pwm outputs based on DT_INST_* defines
Enable the NXP FTM PWM outputs in the board pinmux files based on the
DT_INST_* defines instead of CONFIG_PWM_* to match the pwm_mcux_ftm
driver.

Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
2020-01-06 10:03:20 -06:00
Henrik Brix Andersen
ebb4126cbe soc: nxp: ke1xf: rename ftm instances to pwm to match other SoCs
Rename the NXP FTM instances in the KE1xF SoC to PWM to match the
other SoCs/boards using the FlexTimer as PWM generator.

Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
2020-01-06 10:03:20 -06:00
Antony Pavlov
010797394b boards: arm: nucleo_f030r8: use smaller board image
At the moment we have different images for
for Nucleo F030R8 and Nucleo F070RB boards,
the images have the same pixel size but different
file formats, e.g:

  NAMES="f030r8 f070rb"
  for i in $NAMES; do
    file boards/arm/nucleo_$i/doc/img/nucleo_$i.jpg;
  done

  boards/arm/nucleo_f030r8/doc/img/nucleo_f030r8.jpg: JPEG image
  data, Exif standard: [TIFF image data, little-endian,
  direntries=0], baseline, precision 8, 500x367, frames 3
  boards/arm/nucleo_f070rb/doc/img/nucleo_f070rb.jpg: JPEG image
  data, JFIF standard 1.01, aspect ratio, density 1x1,
  segment length 16, progressive, precision 8, 500x367, frames 3

The nucleo_f030r8.jpg file is larger:

  for i in $NAMES; do
    ls -1 -sh boards/arm/nucleo_$i/doc/img/nucleo_$i.jpg;
  done

  128K boards/arm/nucleo_f030r8/doc/img/nucleo_f030r8.jpg
  40K boards/arm/nucleo_f070rb/doc/img/nucleo_f070rb.jpg

Applying simultaneous black/white threshold to the images
and comparing them with imagemagick tools shows that
the images have no significant difference.

  for i in $NAMES; do
    convert boards/arm/nucleo_$i/doc/img/nucleo_$i.jpg \
            -threshold 80% /tmp/$i.png;
  done
  compare $(for i in $NAMES; do echo -n  "/tmp/$i.png "; done) \
            -compose src /tmp/diff.png

See also 'boards: arm: unify Nucleo-64 boards connectors image'
(https://github.com/zephyrproject-rtos/zephyr/pull/15926).

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
2020-01-06 09:47:46 -06:00
Jose Alberto Meza
c31c6aa99d boards: mec1501modular: Enable additional drivers for modular MEC1501
Enable PWM, ADC, KSCAN and PS2 drivers
Make VCI capable pins to GPIO mode

Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
2020-01-03 12:04:00 -08:00
Sahaj Sarup
4dca5285f0 arm: board: 96b_stm32_sensor_mez: enable USART3
This patchset enables USART3 on the 96Boards STM32 Mezzanine.
It is broken out to J10 Grove Connector.

Changes:

- Enabled USART3 in board dts.
- Updated board index.rst with uart pinouts.
- soc dtsi: enabled usart3.

Test: Tested USART3 as console at 115200 baud

Signed-off-by: Sahaj Sarup <sahaj.sarup@linaro.org>
2020-01-03 09:37:08 -06:00
Erwan Gouriou
dfebba471c boards/shields: adafruit_2_8_tft_touch_v2: Move to Kconfig.defconfig
Move adafruit_2_8_tft_touch_v2 to Kconfig.defconfig format.
As part of this change Kconfig flags SPI and DISPLAY are removed
from the shield configuration as they are part of application
configuration.

Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2020-01-02 17:02:41 -05:00
Erwan Gouriou
ffbfd51a9b boards/shields: dfrobot_can_bus_v2_0: Move to Kconfig.shield format
Move dfrobot_can_bus_v2_0 to Kcondig.shield foramt and as part of
this change introduce nrf52_pca10040 board specific configuration.

Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2020-01-02 17:02:41 -05:00
Erwan Gouriou
0c3ef63c5f boards/shields: fdrm_cr20a: Move to conditional Kconfig
Move shield to Kconfig.shield format.

Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2020-01-02 17:02:41 -05:00
Erwan Gouriou
a8a9d34fce boards/shields: frdm_kw41z: Move to conditional Kconfig
Add Kconfig.shield to frdm_kw41z.

Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2020-01-02 17:02:41 -05:00
Erwan Gouriou
0f63dee3c3 boards/shields: link_board_can: Move to conditional Kconfig
Move link_board_can to conditional Kconfig.
As part of this change, some board specific symbols are moved
to reel_board specific file.

Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2020-01-02 17:02:41 -05:00
Erwan Gouriou
35bbcc968c boards/shields: link_board_eth: Move to conditional Kconfig
Move link_board_eth to conditional Kconfig.

Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2020-01-02 17:02:41 -05:00
Erwan Gouriou
b8c921c972 boards/shields: sparkfun_sara_r4: Move to conditional Kconfig
Move sparkfun_sara_r4 to conditional Kconfig.
As part of this change, remove disco_l475_iot1 specific configuration
as it is already part of board default configuration.

Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2020-01-02 17:02:41 -05:00
Erwan Gouriou
4faf6546b1 boards/shields: ssd1306: Factorize and move to conditional Kconfig
Factorize definitions for ssd1306_128x32 and sd1306_128x64 shields
and move to conditional Kconfig.
As part of this change, direct drivers Kconfig symbols enabling
(I2C, SSD1306) are removed as they are application responsibility.
Also disabling SSD16XX is removed as SSD16XX should not be enabled
by default.

Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2020-01-02 17:02:41 -05:00
Erwan Gouriou
980ddb6b98 boards/shields: waveshare_epaper: Move to conditional Kconfig
Move wavehare epaper shields to conditional Kconfig.
As part of this change, direct drivers Kconfig symbols enabling
(SPI, SSD16XX) are removed as they are application
responsibility. GPIO is removed as well as it should be 'y' by
default on  all boards according to Default board configuration
guidelines.

Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2020-01-02 17:02:41 -05:00
Erwan Gouriou
f74667bfc7 boards/shields: x_nucleo_iks01ax: move to conditional Kconfig
Add Kconfig.shield file for x_nucleo_iks01ax shields.

Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2020-01-02 17:02:41 -05:00
Erwan Gouriou
1155c526ac boards/shields: Move wnc_m14a2a to conditional Kconfig
Put shield configuration Kconfig flags in new Kconfig.defconfig.
This way shield BLE subsystem can now be selected by application
using NETWORKING symbol, similarly to what is done when modem is
directly present on board.
Additionally, move board Kconfig files to a similar scheme where
shields related Kconfig flags are made available under shield,
board and NETWORKING symbols.

Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2020-01-02 17:02:41 -05:00
Erwan Gouriou
32e2681fa5 boards/shields: x_nucleo_idb05a1: Move to conditional Kconfig
Put shield configuration Kconfig flags in new Kconfig.defconfig.
This way shield BLE susbystem can now be selected by application
using BT symbol, similarly to what is done when BlueNRG ship is
directly present on board.

Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2020-01-02 17:02:41 -05:00
Erwan Gouriou
e3bed1f260 boards: Kconfig: Enable use of shield conditional Kconfig files
To make use of shields Kconfig.defconfig, parse these files
and newly created Kconfig.shield files which will define the
SHIELD_XXX Kconfig symbols that will be used for conditional
configuration.

Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2020-01-02 17:02:41 -05:00
Henrik Brix Andersen
5640d65775 boards: actinius_icarus: add RGB LED to dts
Add the RGB LED present on the Actinius Icarus board to the device
tree.

Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
2020-01-02 17:01:16 -05:00
Henrik Brix Andersen
e9b2fdaeb2 boards: nrf52840_papyr: add RGB PWM LED to dts
Add RGB PWM LED to the nrf52840_papyr board device tree.

Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
2020-01-02 17:01:16 -05:00
Henrik Brix Andersen
ff525c7284 boards: nrf52840_mdk: add RGB PWM LED to dts
Add RGB PWM LED to the nrf52840_mdk board device tree.

Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
2020-01-02 17:01:16 -05:00
Henrik Brix Andersen
d45b279e50 boards: nrf52832_mdk: add RGB PWM LED to dts
Add RGB PWM LED to the nrf52832_mdk board device tree.

Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
2020-01-02 17:01:16 -05:00
Henrik Brix Andersen
56522d285a boards: decawave_dwm1001_dev: add PWM LED
Add PWM LED to the decawave_dwm1001_dev board device tree.

Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
2020-01-02 17:01:16 -05:00
Johann Fischer
7d0d845980 shields: st7789v_generic: add support for Waveshare 1.3inch display
Add support for Waveshare 1.3inch IPS LCD display.

Signed-off-by: Johann Fischer <j.fischer@phytec.de>
2020-01-02 17:00:06 -05:00
Johann Fischer
04db2dcea7 shields: st7789v_generic: rename shield to TL019FQV01
Rename shield to TL019FQV01.

Signed-off-by: Johann Fischer <j.fischer@phytec.de>
2020-01-02 17:00:06 -05:00
Johann Fischer
f0ba6656ca shields: st7789v_generic: add TL019FQV01 parameter and settings properties
Add TL019FQV01 parameter and settings properties.

Signed-off-by: Johann Fischer <j.fischer@phytec.de>
2020-01-02 17:00:06 -05:00
Jan Van Winkel
7a633a5737 shields: display: Added generic shield for ST7789V
Added a generic display shield for boards based on the ST7789V
display controller.

Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
2020-01-02 17:00:06 -05:00
Manivannan Sadhasivam
ad34e48f01 boards: arm: 96b_wistrio: Use STM32_OSPEEDR_VERY_HIGH_SPEED for SPI1_SCK
Add Add STM32_OSPEEDR_VERY_HIGH_SPEED flag for SPI1_SCK to function
properly. This is needed for the proper communication with the LoRa
modem. Without this flag, the received data is mangled when burst
read is performed.

Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
2019-12-21 12:20:24 +01:00
Manivannan Sadhasivam
9066e4db34 boards: arm: 96b_wistrio: Add on-board SX1276 LoRa Modem suppport
Add support for Semtech SX1276 LoRa Modem found within the RAK811
module on the board.

Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
2019-12-21 12:20:24 +01:00
Ulf Magnusson
fa128cb0ac boards: up_squared: kconfig: Remove unused board variant symbols
The CONFIG_UP_SQUARED_{ATOM,CELERON,PENTIUM} symbols are unused after
commit c5e582038c ("boards/x86/up_squared: default to new local APIC
timer").

Since these symbols are the only thing in boards/x86/up_squared/Kconfig,
which is osource'd in in board/Kconfig, just remove the entire file.

Found with a script.

Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-12-20 21:48:29 -05:00
Jack Rosenthal
a07acbd7a7 board: arm: Add google_kukui board
This adds support for the EC (embedded controller) on a Google
reference board with codename "kukui". This board uses the STM32F098RC
chip. We built an application for the board and verified UART
functionality on the board.

Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2019-12-20 20:27:20 -05:00
Maksim Masalski
de345e2a63 docs: mec15xxevb assy6853 updated set up manual
the .. image directive can only have white-space before. Resolved it.

Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
2019-12-20 13:03:29 -05:00
Maksim Masalski
b7f07dcff7 docs: mec15xxevb assy6853 updated set up manual
Setup manual was modified, added detailed description how to launch
and program board, added more photos for better understanding
of the setup process.

Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
2019-12-20 13:03:29 -05:00
Jose Manuel Pacheco Luna
8e5e812252 boards: rv32m1_vega: Documentation and sanity test support
Edited the index.rst file to say spi functionality is included. Also
edited the .yaml file in the boards directory to support spi for sanity
tests.

Signed-off-by: Jose Manuel Pacheco Luna <manuel.pacheco@nxp.com>
2019-12-20 17:06:10 +01:00
Jose Manuel Pacheco Luna
19097e407c riscv: Configured pinmux for Arduino header SPI
Added in enablement for the SPI-0 instance pins, as found in the
board schematic files. These connect to the arduino headers on the
front of the board.

Signed-off-by: Jose Manuel Pacheco Luna <manuel.pacheco@nxp.com>
2019-12-20 17:06:10 +01:00
Jose Manuel Pacheco Luna
51fc06a708 riscv: enabled spi-0 in defconfig and dtsi files
In preparation for enabling the spi-0 instance

Signed-off-by: Jose Manuel Pacheco Luna <manuel.pacheco@nxp.com>
2019-12-20 17:06:10 +01:00
Henrik Brix Andersen
99df8251bf boards: reel_board: add all LEDs to device tree
Add the green LED on the back of the reel_board to the device tree and
add PWM support for the front RGB LED.

Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
2019-12-20 08:49:43 -05:00
Gerson Fernando Budke
0567184b3b board: atsamr21_xpro: Update config
Enable radio transceiver configuration by default on atsamr21_xpro
board.

Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
2019-12-20 07:58:59 -05:00
Gerson Fernando Budke
b2af5fd5e3 board: atsamr21_xpro: Update yaml with ieee802154
Add IEEE 802.15.4 feature to yaml config file.

Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
2019-12-20 07:58:59 -05:00
Gerson Fernando Budke
8638a0cc3c board: atsamr21_xpro: Add at86rf233 dts binding
Add at86rf233 dts binding to enable IEEE 802.15.4 driver. The driver is
managed by sercom-4 at chip level.

see: SAM-R21_G.pdf section: 5.2 Internal Multiplexed Signals

Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
2019-12-20 07:58:59 -05:00
Peter Bigot
bd59397672 boards: nrf52840_pca10056: use correct maximum write speed for flash
MX25R64 supports maximum 33 MHz clock for READ operations in
high-performance mode.  The previous 80 MHz speed should have been
8 MHz and was for DSPI/QSPI operations.

Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
2019-12-19 12:37:31 +01:00
Stephanos Ioannidis
7aa01ff0b0 boards: qemu_cortex_r5: Remove ignored tags for working tests.
This commit removes any ignored testing tags for working tests.

In the future, this ignored testing tag list will be further reduced
as critical bugs for the qemu_cortex_r5 platform are addressed
(see #20217).

Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
2019-12-18 22:11:25 +01:00
Stephanos Ioannidis
59cb2acd9e boards: qemu_cortex_r5: Add a temporary hack to support CI testing.
This commit adds a temporary hack to support CI testing of the
qemu_cortex_r5 platform.

The Xilinx QEMU, required to run the tests for this platform, is
currently not available in the default SDK for CI (version 0.10.3) and
attempting to run any tests with the AArch64 QEMU included in this SDK
will cause failures (see #20217).

Since the latest SDK (version 0.11.0-alpha-8) has been added to the CI
image to allow initial testing, this hack automatically detects this
and uses the Xilinx QEMU for testing the qemu_cortex_r5 platform.

When the Zephyr SDK 0.11.0 is available as the default SDK for CI in
the future, this commit should be reverted.

Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
2019-12-18 22:11:25 +01:00
Stephanos Ioannidis
f36b39a713 boards: arm: qemu_cortex_r5: Use arm-generic-fdt machine type.
This commit modifies the 'qemu_cortex_r5' board qemu emulation to use
the arm-generic-fdt machine with the Xilinx-provided zcu102 device tree
instead of the hard-coded xlnx-zcu102 machine, which is very primitive
and cannot properly emulate the Cortex-R5 RPU of ZynqMP.

The QEMU zcu102 FDT (fdt-single_arch-zcu102-arm.dtb) in this commit was
generated from the v2019.2 release of the Xilinx/qemu-devicetrees.

Zephyr SDK version 0.11 Alpha 4 or above is required to use this, as
arm-generic-fdt is supported only by the Xilinx QEMU fork which was
added to the Zephyr SDK in the version 0.11 Alpha 4.

For more details, refer to the issue #20217.

Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
2019-12-18 22:11:25 +01:00
Filip Brozovic
19d1ea2646 boards: stm32g0316-disco: add support for the ST STM32G0316-DISCO board
Add support for the ST STM32G0316-DISCO development board. This board
features an ST STM32G031J6 MCU on a breakable SO8 to DIL8 module, a user
LED and a button.

Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
2019-12-18 22:06:39 +01:00
Pauli Salmenrinne
ca6eee5444 boards: stm32f411e_disco: Add pwm to drive green led
This enables the fade_led example to work with this board.

Signed-off-by: Pauli Salmenrinne <susundberg@gmail.com>
2019-12-18 14:48:06 -06:00
Erwan Gouriou
825b4d66b5 boards: nucleo_f746zg: Update reference for user manual
Wrong reference was provided for board user manual.
Fix this.


Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2019-12-18 10:51:24 -05:00
Ulf Magnusson
b292f7643b kconfig: Remove assignments to promptless SOC_FAMILY_NRF symbol
SOC_FAMILY_NRF has no prompt. Assignments in configuration files have no
effect on symbols without prompts. A prompt means the symbol is
user-configurable.

SOC_FAMILY_NRF is instead enabled indirectly through being selected by
other symbols.

Detected through some work-in-progress improved error checking.

Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-12-18 14:42:58 +01:00
Sahaj Sarup
d072ab83ac arm: 96b_stm32_sensor_mez: spi: Enable SPI4
This patch enables SPI4 on the 96Boards STM32 Sensors Mezzanine.
SPI4 has been broken out to a Grove Connector on the board.

Changes:

- Updated board dts to enable spi4
- Updated board Kconfig
- Updated board documentation
- Update board pinmux
- Updated stm32f4 pinmux header file
- Updated stm32f401 dtsi
- Updated stm32f4 defconfig to enable PORTE GPIO
- Added board to spi_loopback test

Test: spi_loopback test passed

Signed-off-by: Sahaj Sarup <sahaj.sarup@linaro.org>
2019-12-18 07:34:37 -06:00
Mateusz Holenko
008241311b boards: litex_vexriscv: Enable networking
This sets missing config options necessary
to enable liteeth driver.

Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
2019-12-18 10:35:15 +02:00
Krzysztof Chruscinski
00156ad80a drivers: clock_control: nrf: Switch to single clock device
Low frequency and high frequency clocks had separate devices
while they are actually handled by single peripheral with single
interrupt. The split was done probably because opaque subsys
argument in the API was used for other purposes and there was
no way to pass the information which clock should be controlled.
Implementation changes some time ago and subsys parameter was
no longer used. It now can be used to indicate which clock should
be controlled.

Change become necessary when nrf5340 is taken into account where
there are more clocks and current approach would lead to create
multiple devices - mess.

Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
2019-12-17 14:38:19 +01:00
Andrei Stoica
abd1d047dd Bluetooth: controller: enable dynamic TXP over LL_SPLIT arch (#17731)
This commit targets solving issue #17731 over the LL_SW_SPLIT
arch of the BLE stack in Zephyr. This functionality is exposed
to the user as HCI Zephyr Command extensions

- BT_HCI_OP_VS_WRITE_TX_POWER_LEVEL
- BT_HCI_OP_VS_READ_TX_POWER_LEVEL

which enable Tx power read/write operations within BLE radio events
on a per role/connection basis.

The functionality is enabled upon the Kconfig advanced configuration
triggered by

- BT_CTLR_TX_PWR_DYNAMIC_CONTROL

depending on the enablement of Zephyr HCI vendor-specific command
extensions.

Necessary low-level radio HAL functionality and power definitions
are also supplied to address the high-level functionality of
controlling the Tx power.

Signed-off-by: Andrei Stoica <stoica.razvan.andrei@gmail.com>
2019-12-17 12:29:57 +01:00
Martin Jaeger
39444ba9a2 boards: arm: nucleo_l452re added
Port based on existing nucleo_l432kc and nucleo_l476rg

Signed-off-by: Martin Jaeger <17674105+martinjaeger@users.noreply.github.com>
2019-12-13 17:02:40 -06:00
Yihui Xiong
5b49027abd boards: add ADC config to nrf52840_mdk
ADC is supported by nRF52840, so add it to nrf52840_mdk.

Signed-off-by: Yihui Xiong <yihui.xiong@hotmail.com>
2019-12-13 16:43:20 -06:00
Maureen Helm
72e0080e56 drivers: serial: Rename lpc usart shim driver
Renames the lpc usart shim driver to more accurately reflect the
flexcomm hardware IP and to prepare for instantiating it on an SoC
outside the LPC family.

Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2019-12-13 18:45:54 +01:00
Jose Alberto Meza
b3236ebf42 boards: arm: mchp: Enable additional drivers for MEC15xxEVB board
Configure as GPIOs pins that by default are not GPIOs
Enable pinmux for port F
Enable ADC, PWM drivers by default, but keep SPI disabled.
Swap I2C instances since I2C0 is multiplexed with UART2
Select VTR3 as 1.8V

Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
2019-12-12 11:47:50 -08:00
Kwon Tae-young
58702f401c doc: arm: 96b_wistrio: add EEPROM support to the boards doc
EEPROM drivers that support STM32L1 have been tested
on 96b_wistrio boards.
EEPROM support is added to the board documentation.

Signed-off-by: Kwon Tae-young <tykwon@m2i.co.kr>
2019-12-12 07:57:33 -06:00
Kwon Tae-young
4920965398 test: driver: eeprom: add board support for eeprom test cases
The STM32L1's EEPROM function has been tested on 96b_wistrio boards.

Signed-off-by: Kwon Tae-young <tykwon@m2i.co.kr>
2019-12-12 07:57:33 -06:00
Ulf Magnusson
984bfae831 global: Remove leading/trailing blank lines in files
Remove leading/trailing blank lines in .c, .h, .py, .rst, .yml, and
.yaml files.

Will avoid failures with the new CI test in
https://github.com/zephyrproject-rtos/ci-tools/pull/112, though it only
checks changed files.

Move the 'target-notes' target in boards/xtensa/odroid_go/doc/index.rst
to get rid of the trailing blank line there. It was probably misplaced.

Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-12-11 19:17:27 +01:00
Alberto Escolar Piedras
dfed64c2a4 nrf52_bsim: Use HW models from new west module
Fetch HW models from a new west module.
And, remove all pre-west glue which was used to:
 * Fetch them in CI
 * Validate their vesion
 * Modify the include path and link to them

Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
2019-12-11 11:33:02 +01:00
Maureen Helm
5a19106396 boards: arm: Add arduino header to all mimxrt boards
Adds a device tree nexus node to define which gpio pins are mapped from
the soc to the arduino header.

Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2019-12-10 08:49:31 -06:00
Maureen Helm
851e397d19 boards: arm: Add arduino header to all frdm boards
Adds a device tree nexus node to define which gpio pins are mapped from
the soc to the arduino header.

The frdm_kw41z board excludes the arduino A0 pin because it cannot be
muxed as a gpio on the soc.

Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2019-12-10 08:49:31 -06:00
Maureen Helm
5472961ca0 boards: lpcxpresso54114: Enable spi instance 5
Enables spi instance 5 on the lpcxpresso54114 board. Configures pinmuxes
and clocks, and updates board documentation accordingly.

Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2019-12-10 08:48:56 -06:00
Maureen Helm
ea5c3b6e04 boards: lpcxpresso55s69: Enable spi instance 8
Enables the high-speed spi instance 8 on the lpcxpresso55s69 board.
Configures pinmuxes and clocks, and updates board documentation
accordingly.

Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2019-12-10 08:48:56 -06:00
Kumar Gala
cd0f8d5c4f include: Fix use of <sys_io.h> -> <sys/sys_io.h>
Fix #include <sys_io.h> as it has been deprecated and
should be #include <sys/sys_io.h>.

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-12-10 08:39:37 -05:00
Kumar Gala
bb9efbfbd0 include: Fix use of <gpio.h> -> <drivers/gpio.h>
Fix #include <gpio.h> as it has been deprecated and
should be #include <drivers/gpio.h>.

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-12-10 08:39:37 -05:00
Ulf Magnusson
fa453ea997 riscv: kconfig: Remove assignment to promptless CONFIG_64BIT symbol
64BIT has no prompt. Assignments in configuration files have no effect
on symbols without prompts. A prompt means the symbol is
user-configurable.

64BIT is instead enabled indirectly through being selected by
BOARD_QEMU_RISCV64, which is enabled in the same configuration file.

Detected through some work-in-progress improved error checking.

Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-12-09 19:58:36 -06:00
Ulf Magnusson
98d02613a3 kconfig: Remove assignments to promptless CPU_MINUTEIA symbol
CPU_MINUTEIA has no prompt. Assignments in configuration files have no
effect on symbols without prompts. A prompt means the symbol is
user-configurable.

CPU_MINUTEIA is instead enabled indirectly through being selected by
other symbols.

Detected through some work-in-progress improved error checking.

Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-12-09 16:41:32 -05:00
Ulf Magnusson
90b9eb3a9e kconfig: Rename USE_CODE_PARTITION to USE_DT_CODE_PARTITION
USE_CODE_PARTITION is a bit vague as a symbol name ("use code partition
how?"). Rename it to USE_DT_CODE_PARTITION to make it clearer that it's
about devicetree.

This would break any third-party configuration files that set it, but
it'll generate an error since kconfig.py promotes warnings to errors, so
it's probably not a big deal.

Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-12-09 16:40:24 -05:00
Kumar Gala
e1fa7286cf boards: lpcxpresso55s69: Fix use of deprecated macro
In board pinmux.c ifdef of the form DT_GPIO_KEYS_SWx_GPIO_CONTROLLER
should be DT_GPIO_KEYS_SWx_GPIOS_CONTROLLER.

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-12-09 16:31:42 -05:00
Peter Bigot
8a35df6fb2 boards: bbc_microbit: reference board variations
The original v1.3 had MMA8653+MAG3110, but v1.5 has verified LSM303AGR
and theoretical FXOS8700.  Add the v1.5 variant 1 nodes in disabled
form; they can be enabled through overlays.

Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
2019-12-09 12:53:27 -05:00
Maureen Helm
6cfd8113a7 boards: arm: Extend usb device support to all nxp imx rt boards
Extends the usb device support from mimxrt10{50,64}_evk to all other imx
rt boards.

Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2019-12-09 11:40:12 -06:00
Scott Worley
60915c884f soc : mec1501 : Deep and light sleep example
Created MEC1501 deep and light sleep example for MCHP MEC1501.
Modifications were made to SoC, board, timer, and hello world
sample program. Power management split into SoC power
implementing the interface and device power for device specific
logic.

Signed-off-by: Scott Worley <scott.worley@microchip.com>
2019-12-09 11:57:03 -05:00
Jan Van Winkel
8cd4a817d9 drivers/flash/flash_simulator: Added file back end for posix arch
Extended flash simulator for posix architecture to read/write data
from a binary file on the host file system.

Further enable the flash simulator by default on native_posix(_64)
boards and updated the documentation accordingly.

Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
2019-12-09 11:56:21 -05:00
Yannis Damigos
1f27657167 olimexino_stm32: Use stm32flash runner
olimexino_stm32 board doesn't have a
debugger. Now that stm32flash
runner is available, let's use it.

Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
2019-12-09 17:03:10 +01:00
Johann Fischer
faab559b47 boards: nrf52833_pca10100: fix arduino SPI configuration
Fix and enable arduino SPI configuration.
Remove conficting spi2 node.

Signed-off-by: Johann Fischer <j.fischer@phytec.de>
2019-12-09 16:47:38 +01:00
Ulf Magnusson
ff4f5b01d6 kconfig: Remove assignments to promptless SOC_FAMILY_ARM symbol
SOC_FAMILY_ARM has no prompt. Assignments in configuration files have no
effect on symbols without prompts. A prompt means the symbol is
user-configurable.

SOC_FAMILY_ARM is instead enabled indirectly through being selected by
other symbols.

Detected through some work-in-progress improved error checking.

Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-12-09 16:24:12 +01:00
Piotr Mienkowski
cf1918c6e7 boards: mps2_an521: remove board.h
Commit ceffca2c42 added DTS support for board LEDs and buttons. Remove
redundant LED0_GPIO_PORT, SW0_GPIO_NAME, etc. defines.

Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
2019-12-09 16:21:03 +01:00
Rubin Gerritsen
87fa13cc03 boards: arm: nordic: nrf5340_dk_nrf5340 uart dts config for BLE
Add dts configs for bt-c2h-uart and bt-mon-uart. These are used by
the hci_uart sample and BT_DEBUG_MONITOR.

Signed-off-by: Rubin Gerritsen <Rubin.Gerritsen@nordicsemi.no>
2019-12-09 15:39:07 +01:00
Carles Cufi
5b26b01bb6 soc: x86: apollo_lake: Turn .rst doc into .txt
In order to avoid a warning from Sphinx complaining that the
supported_features.rst file is not included in any ToC, rename it to
.txt so that Sphinx understands that this is only a snippet to be
included in other files.

Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
2019-12-06 16:56:24 +01:00
Peter A. Bigot
73ed1bafd1 boards: hifive1*: fix ticks per second
The HiFive1 boards power up using a 32 KiHz low frequency kernel, so
have a cycle rate of 32768 Hz.  The board definitions have not been
revisited since the Zephyr default for ticks-per-second increased from
100 to 10000.  The timer system on the board does not operate
correctly at 4 cycles per tick, but does at 328 cycles per tick.

To support functional timers while keeping system milliseconds in sync
with clock time set ticks-per-second to 128.

Signed-off-by: Peter A. Bigot <pab@pabigot.com>
2019-11-27 13:32:16 -05:00
Andrzej Głąbek
6f09c903ba boards: nrf5340_dk_nrf5340: Move buttons node from leds to root node
For consistency with all other boards, make the `buttons` node a child
of the root node, not the `leds` one.

Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-11-27 16:40:08 +01:00
peng1 chen
d22e91b61a up_squared: config the flash runner.
set the flash runner of up squared board using misc-flasher.

Signed-off-by: peng1 chen <peng1.chen@intel.com>
2019-11-24 23:56:02 -05:00
Armando Visconti
75d21c1513 board/shields: x-nucleo-iks01a3: (FIX) use INT2 for LSM6DSO DRDY
On LSM6DSO sensor the INT1 pin is used for both generating the drdy
interrupt and for switching to I3C hotjoin mode just after reset if
it is at logical '1' level. If you reset the x_nucleo_shield3 board
the LSM6DSO enter in hot join, as INT1 '1' level is preserved by
the level shifter.

This commit switch to INT2 to generate DRDY interrupt, so that INT1
always remain to logical '0' level.

Fixes: #20933

Signed-off-by: Armando Visconti <armando.visconti@st.com>
2019-11-22 15:40:30 +01:00
Ioannis Glaropoulos
32514d0441 boards: arm: mps2_an521: enable testing on mps2_an521 by default
mps2_an521 is the default board for ARMv8-M architecture with
support for Security Extension, and CI should test building and
running samples and tests on this board by default. As the focus
is on kernel, userspace, and arm test suites, certain tags are
set to be ignored when testing on this platform.

Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
2019-11-22 11:36:59 +01:00
Alberto Escolar Piedras
423f344fab native_posix: Ensure printf fed type matches format specifier
In Zephyr we have the rule of "do not use stdint defined types",
but unfortunately that leaves us with no properly defined
format specifiers for printing values out.
So cast to stdint types in this expression to actually be able to
do so.

Fixes Coverity CID: 205798
Fixes Coverity CID: 205825

Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
2019-11-20 21:55:13 +01:00
Francisco Munoz
882a426622 boards: mec1501modular_assy6885: Turn on peripherals on the board
Turn on existing espi 8042 module for modular card

Signed-off-by: Francisco Munoz <francisco.munoz.ruiz@intel.com>
2019-11-20 15:02:08 -05:00
Kamil Piszczek
2cceb62206 boards: nrf5340_dk_nrf5340: use RPMsg as default HCI driver for BLE
When building with support for BLE stack on the nRF5340 APP CPU
(Application MCU), use RPMsg HCI driver by default.

Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
2019-11-20 19:29:06 +01:00
Kamil Piszczek
55dade7845 boards: nrf5340_dk_nrf5340: enable ECC if building with BT
When building with support for BLE stack, enable the BT_ECC
for the nRF5340 NET CPU (Network MCU).

Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
2019-11-20 19:29:06 +01:00
Kamil Piszczek
8d4420217c boards: nrf5340_dk_nrf5340: enable VS commands if building with BT
When building with support for BLE stack, enable the Vendor Specific
commands for the nRF5340 APP CPU (Application MCU).

Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
2019-11-20 19:29:06 +01:00
Kamil Piszczek
2dd2da0f0c boards: arm: nrf5340_dk_nrf5340: bind shared memory with ipc shim in dts
Bound shared memory definition with IPC shim for nRF5340 DK.

Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
2019-11-20 19:29:06 +01:00
Ulf Magnusson
d0a6f682d1 kconfig: Fix up newly-introduced copy-pasted headers
Same deal as in https://github.com/zephyrproject-rtos/zephyr/pull/20280,
for newly-introduced stuff.

Will avoid failures with the new CI test in
https://github.com/zephyrproject-rtos/ci-tools/pull/112, though it only
checks changed files.

Also fix some un-indented properties on choices. Choice properties work
the same as symbol properties syntactically.

Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-11-19 15:25:08 -05:00
Peter A. Bigot
b61574d81b boards: hifive1_revb: add ardunio_i2c support
Add node label and missing label property.

Signed-off-by: Peter A. Bigot <pab@pabigot.com>
2019-11-19 13:55:27 -05:00
Peter A. Bigot
0a8dc5b338 boards: hifive1_revb: add arduino gpio nexus map
Provide the mapping from FE310-G002 GPIO pins to the Arduino Uno
headers.  Note where pins have pre-assigned functions that may
interfere with use as GPIOs with the default pinmux assignments.

Signed-off-by: Peter A. Bigot <pab@pabigot.com>
2019-11-19 13:55:27 -05:00
Maureen Helm
3bbb96f49d boards: arm: Add missing supported features to nxp imx rt boards
Adds missing items to the list of supported features for all nxp imx rt
boards. These features were already supported, just missing from the
list.

This change increases the number of samples and tests that sanitycheck
selects for these boards.

Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2019-11-19 13:53:09 -05:00
Maureen Helm
5ca1e08ab9 boards: arm: Sort supported list in alpha order for nxp boards
Sorts the list of supported features in alphabetical order for all nxp
boards. No features are added or removed.

Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2019-11-19 13:53:09 -05:00
Ioannis Glaropoulos
01f1ad4621 boards: arm: nrf: change board docs to link to Nordic Infocenter
Link to Nordic Semiconductor Infocenter, instead of DocLib
in the documentation for nRF-based Development Kits.

Change Nordic Semi to Nordic Semiconductor in the
DK figure captions.

Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
2019-11-19 13:52:40 -05:00
Alberto Escolar Piedras
5ef243dce5 nrf52_bsim: doc: Change to fetch manifest thru http
Some people are behind firewalls that prevent them
from doing ssh connections.
Change the default BabbleSim fetching instructions to
be over https which should work for everybody.

Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
2019-11-19 10:22:23 -05:00
Ioannis Glaropoulos
c2385389d1 boards: arm: nrf53: add missing Dev Kit information
Adding missing information (image and link) for the
nRF5340 Development Kit.

Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
2019-11-19 06:35:39 -06:00
Andrzej Puzdrowski
8f555773ca boards/arm/nrf5340_dk_nrf5340: make cpunet flash partitions relative
A partition start offsets should be expressed relative to the flash
device base address. For cpunet flash partitions start offsets
were improperly expressed as absolute flash address.

This patch fixes partitions start addresses for nRF5340 cpunet.

Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
2019-11-19 10:33:01 +01:00
Richard Osterloh
c82f3d4492 boards: arm: nucleo_g431rb: Fix flash back storage settings
Flash storage requires at least 2 sectors in order to work correctly

Signed-off-by: Richard Osterloh <richard.osterloh@gmail.com>
2019-11-18 11:56:49 -06:00
Loic Poulain
187397ab16 boards: arm: mimxrt1064_evk: Fix display support
Delete wrong LVGL_BITS_PER_PIXEL config and add mimxrt1064_evk
to the lvgl sample platform whitelist.

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
2019-11-15 10:06:56 +01:00
Vinayak Kariappa Chettimada
29a1bbd24a boards: arm: nrf5340_dk: Enable DC/DC by default
Since the nRF5340 DK contains the required DC/DC circuitry,
enable it by default while keeping it configurable. This
reduces power consumption in application core , network
core and high voltage use.

Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
2019-11-14 12:18:44 +01:00
Wayne Ren
2b3c9905fe boards: nsim: add missed -firq for nsim_hs_smp
nsim_hs_smp has 2 reg banks, so it should have firq

Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
2019-11-13 12:04:18 -08:00
Maureen Helm
1e077ff99d boards: rv32m1_vega: Configure led pinmuxes as gpios
Explicitly configures the rgb led pinmuxes as gpios. Currently the gpio
driver quietly changes the pinmux to gpio mode when configuring a gpio
pin, but this behavior is about to change.

Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2019-11-13 12:05:48 -06:00
Peter Bigot
bbcea6fbe6 boards: mark gpio as supported capability where known missing
Some board description files failed to note where gpio was supported,
causing tests to be inappropriately filtered.  Add the feature where
the gpio_basic_api test would use it.

Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
2019-11-13 12:05:48 -06:00
Andrei Gansari
f7e2d8a5d6 boards: lpcxpresso55s69 pinmux macros refactor
Board is refactored to use DTS generated value, not use
magic numbers.

Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
2019-11-13 12:05:48 -06:00
Emil Obalski
11849257c0 boards: Update defconfigs after renaming to USB_NRFX
Name convention for nordic USB driver changed
Kconfig files for custom boards have to be udapted accordingly.
Changes affect only name convention change.

Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
2019-11-13 10:33:38 -06:00
Emil Obalski
82c6d7c415 boards: nordic: Add support for nRF52833_pca10100 board
This commit adds support for nRF52833 development board.
Changes afffects:
 - Introduce files related to board description.
 - Add blank documentation file (for future update).
 - configuration files for build process.

Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
2019-11-13 10:33:38 -06:00
Francois Ramu
02ff0e45a2 boards: arm: st_stm32: add lptimer to nucleo_wb55rg board
This patch introduces the support of the LowPower Timer
     for the STM32WBxx from STMicroelectronics.

Signed-off-by: Francois Ramu <francois.ramu@st.com>
2019-11-13 10:31:06 -06:00
Alexander Wachter
2302d2615b boards: olimexino_stm32: Enable CAN support for this board
This commit enables CAN support for the Olimexino STM32 board.

Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>

Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
2019-11-13 10:30:19 -06:00
Anas Nashif
c724033acc west: prepend -c to openocd commands
commit 0df4a53107 changed the behavior of
how openocd commands are passed to openocd. We used to add -c to each
command, now the commands are being added without -c causing an error.

This adds "-c" to all commands instead of just passing a list.

Also fixes #20449.

Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
2019-11-12 14:37:34 -05:00
Peter A. Bigot
920d477264 dts: jedec,spi-nor: add support for deep-power-down specification
Provide information required to allow the driver to put the flash chip
into a deep power down mode.  This can reduce standby current by as
much as 90%.

Signed-off-by: Peter A. Bigot <pab@pabigot.com>
2019-11-09 15:26:06 +01:00
Peter A. Bigot
f83ad78261 dts: jedec,spi-nor: require size property
The SPI NOR driver requires that the size (in bits) be provided in the
devicetree node.  Update the binding to make the property required,
and update all nodes based on the memory chip identified.

Signed-off-by: Peter A. Bigot <pab@pabigot.com>
2019-11-09 15:26:06 +01:00
Andrew Boie
1c97851726 x86: enable MMU on 64-bit with SMP
The races are believed to be resolved with the patch to
irq_offload(). Allow the MMU to be turned on and enable
it for qemu_x86_64.

Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
2019-11-08 15:16:43 -08:00
Ioannis Glaropoulos
38216b100c boards: nrf5340_dk_nrf5340: boot Network MCU from Application MCU
We add the functionality that allows the nRF5340 Application
MCU to boot the Network MCU by releasing the RESET line. The
Application MCU may optionally allocate and corfigure resources
that the Network MCU is going to use (currently GPIO and secure
attribution) if running in secure mode. Non-Secure Application
MCU firmware can only issue Network MCU resets.

Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
2019-11-08 21:45:27 +01:00
Ioannis Glaropoulos
b0c8293bf8 boards: arm: nrf5340 dk: add documentation for nRF5340 DK board
We add supportive documentation for the nRF5340 DK board.

Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
2019-11-08 19:26:35 +01:00
Ioannis Glaropoulos
2c2e2b678b boards: nrf5340_dk_nrf5340: enable BT CTLR if building with BT
When building with support for BLE stack, enable
the BLE Controller module for the nRF5340 DK NRF5340
CPUNET (Network MCU).

Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
2019-11-08 19:26:35 +01:00
Gaute Gamnes
32e85adc26 boards: arm: nordic: nRF5340_dk_nrf5340_cpunet board definition
- Modify board cmake file for Network MCU
- nRF5340 DK NRF5340 CPU NET board definition (Network MCU)

Signed-off-by: Gaute Gamnes <gaute.gamnes@nordicsemi.no>
2019-11-08 19:26:35 +01:00
Ioannis Glaropoulos
b4acd3bbbd boards: arm: nordic: nRF5340_dk_nrf5340_cpuapp board definition
- Board cmake file with runner commands for Application MCU
- nRF5340 DK NRF5340 CPUAPP board definition (Application MCU)
  Secure and Non-Secure board definition
- nRF5340 shared SRAM partitioning info

Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
2019-11-08 19:26:35 +01:00
Alberto Escolar Piedras
d9c64a930a nrf52_bsim: Update the NRF52 HW models revision
Updated to the official tag (v2.0)
(same SHA as test_2019_11_08_CIc)

Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
2019-11-08 17:40:21 +01:00
Christian Taedcke
b25569ef74 soc: silabs_exx32: Enable mpu on efr32mg soc
Enables the arm v7m mpu on the efr32mg soc and the board
efr32mg_sltb004a.

Tested on hardware with samples/mpu/mpu_test and
tests/kernel/mem_protect

Signed-off-by: Christian Taedcke <hacking@taedcke.com>
2019-11-08 10:38:18 -06:00
Francois Ramu
1967a1befe boards: arm: st_stm32: add lptimer to disco_l475_iot1 board
This patch introduces the support of the LowPower Timer
     for the STM32L4xx from STMicroelectronics.

Signed-off-by: Francois Ramu <francois.ramu@st.com>
2019-11-08 10:04:21 -06:00
Francois Ramu
39e0b4bf59 boards: arm: st_stm32: add lptimer to nucleo_l4r5zi boards
This patch introduces the support of the LowPower Timer
     for the STM32L4xx from STMicroelectronics.

Signed-off-by: Francois Ramu <francois.ramu@st.com>
2019-11-08 10:04:21 -06:00
David Leach
d36b1b11f7 boards: riscv: rv32m1: enable BT related configuration
Specific SW defined BLE LL parameters need to be set
if the user enables it on this platform. As such, conditionally
enable them directly into the defconfig.

INTMUX CH2 and CH3 are not available to be used if BT support
is enabled on Vega, because they are used internally by the
BLE SW LL

Signed-off-by: David Leach <david.leach@nxp.com>
2019-11-08 15:38:57 +01:00
Alex Porosanu
bfcfac8bf3 doc: riscv: rv32m1_vega: add BLE software link layer info
Since the experimental BLE software link layer is enabled on
the VEGABoard, add some information about it, as well as the
limitations.

Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com>
2019-11-08 15:38:57 +01:00
David Leach
94106a8ff3 boards: riscv: rv32m1: add support for GPIO debugging
Having a pin toggle when the code reaches a certain point
is really useful for debugging; the infrastructure is already
in place for Nordic boards, so just build upon and enable the
mechanism on the Vega board as well.

Signed-off-by: David Leach <david.leach@nxp.com>
2019-11-08 15:38:57 +01:00
Andrzej Głąbek
6d1d7449c1 nrf52_bsim: Update the NRF52 HW models revision
Update the models revision used for building so that nrf52_bsim
can be used with nrfx 2.0.0.

Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-11-08 14:54:12 +01:00
Andrzej Głąbek
2115099932 nordic: Update nrfx HAL function calls after switching to nrfx 2.0.0
Calls to nrfx HAL functions in various nRF platform related source
files are complemented with pointers to relevant peripherals.

Additionally, TIMER HAL functions that got renamed in nrfx 2.0.0 are
updated in the qemu_cortex_m0 board supporting code.

Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-11-08 14:54:12 +01:00
Alberto Escolar Piedras
48590fa89f nrf52_bsim: Fix: shell return code should be != 0 on ASSERT
When calling posix_print_error_and_exit()
a return != 0 was not provided to the shell
This was due to thee way the tracing functions call back
into the main app exit function, assuming that callback
will return.
But in the SOC_INF boards, that function does
not return, and the tracing functions never have the
chance to exit(!=0)
Fix it by calling posix_exit() in the wrap function instead.

Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
2019-11-08 14:04:19 +01:00
Andrew Boie
4f77c2ad53 kernel: rename z_arch_ to arch_
Promote the private z_arch_* namespace, which specifies
the interface between the core kernel and the
architecture code, to a new top-level namespace named
arch_*.

This allows our documentation generation to create
online documentation for this set of interfaces,
and this set of interfaces is worth treating in a
more formal way anyway.

Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
2019-11-07 15:21:46 -08:00
Johann Fischer
a63c937471 board: reel_board: fix target name used for pyocd
Fix target name used for pyocd.

Signed-off-by: Johann Fischer <j.fischer@phytec.de>
2019-11-07 16:10:29 -06:00
Vincent Wan
1b263ba0a6 dts: specify cpu frequency for TI CC13X2/CC26X2
Add cpu clock frequency information to DTS so that it can be retrieved
in the code.

Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
2019-11-07 15:55:21 -06:00
Henrik Brix Andersen
6e56feb2be boards: native_posix: add EEPROM device
Add a 32kB EEPROM device to the Zephyr native POSIX board for testing
purposes.

Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
2019-11-07 16:32:15 -05:00
Peter Bigot
8e55968aba doc: correct path to boards/riscv
The board area was renamed from riscv32 to riscv back in July to
accommodate riscv64 support.  Fix the remaining references in
documentation.

Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
2019-11-07 12:39:08 -06:00
Erwan Gouriou
eaa6058ebd boards: nucleo_wb55rg: Update doc with BLE support
BLE was missing as supported feature.


Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2019-11-07 02:42:24 -06:00
Martí Bolívar
07a40cbbcf scripts: runners: add misc-flash runner
Some boards require specific sequences of commands to run which aren't
generally useful for other boards. Add a catch-all runner to handle
these cases.

Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
2019-11-06 17:31:53 -08:00
Stephanos Ioannidis
2d7460482d headers: Refactor kernel and arch headers.
This commit refactors kernel and arch headers to establish a boundary
between private and public interface headers.

The refactoring strategy used in this commit is detailed in the issue

This commit introduces the following major changes:

1. Establish a clear boundary between private and public headers by
  removing "kernel/include" and "arch/*/include" from the global
  include paths. Ideally, only kernel/ and arch/*/ source files should
  reference the headers in these directories. If these headers must be
  used by a component, these include paths shall be manually added to
  the CMakeLists.txt file of the component. This is intended to
  discourage applications from including private kernel and arch
  headers either knowingly and unknowingly.

  - kernel/include/ (PRIVATE)
    This directory contains the private headers that provide private
   kernel definitions which should not be visible outside the kernel
   and arch source code. All public kernel definitions must be added
   to an appropriate header located under include/.

  - arch/*/include/ (PRIVATE)
    This directory contains the private headers that provide private
   architecture-specific definitions which should not be visible
   outside the arch and kernel source code. All public architecture-
   specific definitions must be added to an appropriate header located
   under include/arch/*/.

  - include/ AND include/sys/ (PUBLIC)
    This directory contains the public headers that provide public
   kernel definitions which can be referenced by both kernel and
   application code.

  - include/arch/*/ (PUBLIC)
    This directory contains the public headers that provide public
   architecture-specific definitions which can be referenced by both
   kernel and application code.

2. Split arch_interface.h into "kernel-to-arch interface" and "public
  arch interface" divisions.

  - kernel/include/kernel_arch_interface.h
    * provides private "kernel-to-arch interface" definition.
    * includes arch/*/include/kernel_arch_func.h to ensure that the
     interface function implementations are always available.
    * includes sys/arch_interface.h so that public arch interface
     definitions are automatically included when including this file.

  - arch/*/include/kernel_arch_func.h
    * provides architecture-specific "kernel-to-arch interface"
     implementation.
    * only the functions that will be used in kernel and arch source
     files are defined here.

  - include/sys/arch_interface.h
    * provides "public arch interface" definition.
    * includes include/arch/arch_inlines.h to ensure that the
     architecture-specific public inline interface function
     implementations are always available.

  - include/arch/arch_inlines.h
    * includes architecture-specific arch_inlines.h in
     include/arch/*/arch_inline.h.

  - include/arch/*/arch_inline.h
    * provides architecture-specific "public arch interface" inline
     function implementation.
    * supersedes include/sys/arch_inline.h.

3. Refactor kernel and the existing architecture implementations.

  - Remove circular dependency of kernel and arch headers. The
   following general rules should be observed:

    * Never include any private headers from public headers
    * Never include kernel_internal.h in kernel_arch_data.h
    * Always include kernel_arch_data.h from kernel_arch_func.h
    * Never include kernel.h from kernel_struct.h either directly or
     indirectly. Only add the kernel structures that must be referenced
     from public arch headers in this file.

  - Relocate syscall_handler.h to include/ so it can be used in the
   public code. This is necessary because many user-mode public codes
   reference the functions defined in this header.

  - Relocate kernel_arch_thread.h to include/arch/*/thread.h. This is
   necessary to provide architecture-specific thread definition for
   'struct k_thread' in kernel.h.

  - Remove any private header dependencies from public headers using
   the following methods:

    * If dependency is not required, simply omit
    * If dependency is required,
      - Relocate a portion of the required dependencies from the
       private header to an appropriate public header OR
      - Relocate the required private header to make it public.

This commit supersedes #20047, addresses #19666, and fixes #3056.

Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
2019-11-06 16:07:32 -08:00
Stephane D'Alu
b94a6589b4 boards: support for DWM1001-DEV
Board description: https://www.decawave.com/product/dwm1001-module/

Signed-off-by: Stephane D'Alu <sdalu@sdalu.com>
2019-11-06 21:26:23 +01:00
Martí Bolívar
63c6917234 boards: arm: add generic openocd-via-jlink support for nRF5x boards
This support is Zephyr RTOS aware, so you can debug threads as well.

Add a CMake fragment which adds openocd support for nrf5 boards which
can also be flashed via JLink. This ought to work for nRF51 and nRF52
based boards at time of writing with openocd 0.10.0 or later (zephyr
SDK 0.10.3 also worked when I tried for nrf52840_pca10056).

Use it from the nRF DKs from Nordic which have interface MCUs with
Segger compatible firmware. I'm also including Thingy:52, even though
it doesn't, to make it easier when connecting to it via a standalone
JLink dongle. The board has a nice connector for that.

I'm leaving non-Nordic boards alone for now because I don't know them.
It's just one line of CMake to add it for other boards, which should
be easy for their maintainers to do.

Suggested-by: Radosław Koppel <radoslaw.koppel@nordicsemi.no>
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
2019-11-06 21:15:39 +01:00
Kumar Gala
dc2cb92c4a dts: Add standard alias for watchdog
Introduce a standard watchdog alias 'watchdog0' that can be utilized
by sample/test code in the future.  This helps remove the need for
CONFIG_WDT_0_NAME in dts_fixup.h files.

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-11-06 13:51:20 -06:00
Kumar Gala
c111b7e49d watchdog: cmsdk: Convert to use DT generated label for device name
Convert driver to use DT_INST_0_ARM_CMSDK_WATCHDOG_LABEL instead of
CONFIG_WDT_0_NAME.  This requires we introduce a "label" property in all
the related dts files.  Also introduce a standard watchdog alias
('watchdog0') that can be utilized by sample/test code in the future.

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-11-06 13:51:20 -06:00
Erwan Gouriou
4dc303b99b dts: stm32: Remove pinctrl definitions
dts pinctrl definitions were pushed in tree without the code
available to deal with it. They have been kept waiting for the
code, but this is taking much more time than initially thought.

So in current zephyr tree, for all STM32 boards, we have pinmux.c
file which is used to configure pins and these files that are
basically no-op. This situation is creating a lot of confusion
especially to new comers, and create useless maintenance effort.

Remove these files for now.
When zephyr will ready to use them, this commit could be reverted.

Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2019-11-06 18:26:04 +01:00
Erwan Gouriou
6994dcc30b shields: x_nucleo_iks01a1: Enable IRQ pin for LIS3MDL magn sensor
Update shield description and sample to allow testing of LIS3MDL
sensor IRQ pin.

Update sample yaml file to state dependency on arduino_gpio.
Additionally, fix redundant line in sample yaml

Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2019-11-06 17:10:49 +01:00
Song Qiang
7a7cc2f7b4 boards: 96b_stm32_sensor_mez: apply kconfig changes
DMA is now selected by Kconfig symbols in I2S, and DMA_STM32
is selected by DMA in
soc/arm/st_stm32/common/Kconfig.defconfig.series. So remove the
DMA selecting operation here.

Signed-off-by: Song Qiang <songqiang1304521@gmail.com>
2019-11-06 14:14:39 +01:00
Song Qiang
85a0cc8f9a boards: arm: 96b_argonkey: Update dma defconfig for tests
Previous defconfig for dma is DMA_STM32F4X in this board, while the new
generic driver uses DMA_STM32 to enable DMA support, and also dma driver
of stm32 now needs HEAP_MEM_POOL_SIZE to be big enough to hold dma
stream instances.

Additional .conf files are added for also adding HEAP_MEM_POOL_SIZE
configuration to two test cases.

Signed-off-by: Song Qiang <songqiang1304521@gmail.com>
2019-11-06 14:14:39 +01:00
Song Qiang
87b9da6141 dt-bindings: boards: apply dma dts changes to some boards
These boards using i2s in dts now have to declare the usage of dma in
dts, too.

Signed-off-by: Song Qiang <songqiang1304521@gmail.com>
2019-11-06 14:14:39 +01:00
Kumar Gala
819276e082 sensor: ccs811: Convert GPIOs to device tree
Update ccs811 dts binding to include GPIO pins for wakeup, reset, and
interrupt and change driver code to get the GPIO pin and controller
info from DT instead of Kconfig.

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-11-06 11:13:04 +01:00
Armando Visconti
21d1b26618 boards/arm: SensorTile.box: fix LIS2MDL configuration
The SensorTile.box SPI3 bus hosts the LIS2MDL device connected
in 4-wires mode (full duplex MISO and MOSI lines) by default.

Signed-off-by: Armando Visconti <armando.visconti@st.com>
2019-11-05 15:42:00 -06:00
Kumar Gala
cd35a4a753 sensor: vl53l0x: Convert GPIO XSHUT to device tree
Update vl53l0x dts binding to include GPIO XSHUT pin and change
driver code to get the GPIO pin and controller info from DT instead of
Kconfig.

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-11-05 15:07:18 -06:00
Thomas Kupper
ef0e3ed31d west: runner: add support for stm32flash runner
Add stm32flash runner and 8 stm32flash runner tests

Signed-off-by: Thomas Kupper <thomas.kupper@gmail.com>
2019-11-05 15:02:53 -05:00
Peter A. Bigot
991287b26a boards: particle_*: correct antenna selection sense
Experimentation with RSSI checks of BLE scans confirms that the
antenna switch setting is incorrect on the argon, boron, and xenon
platforms: when PCB is selected, performance is best with a uFL
antenna, and vice-versa.  Checks against the Particle OpenThread
firmware confirm that the correct practice is to invert the settings.
Though the SKY 13351 SPDT switch datasheet suggests otherwise it seems
the VCTLx signals are active low.

Switch the sense of all antennal selection output operations.

Signed-off-by: Peter A. Bigot <pab@pabigot.com>
2019-11-05 15:01:28 -05:00
Jose Alberto Meza
57695b6650 boards: mec: mec15modular: Update documentation
Add details for features exposed via headers.
Add power management recommended setup.

Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
2019-11-05 19:40:55 +01:00
Filip Brozovic
4d9e93b791 boards: twr-kv58f220m: add support for the NXP TWR-KV58F220M board
Add support for the NXP TWR-KV58F220M development board. This board
features an NXP MKV58F24 MCU, four user LEDs and four buttons,
potentiometer, two TWRPI headers, and a motor control header.

Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
2019-11-05 19:37:21 +01:00
David Leach
afdc63f320 subsys/random: Add cryptographically secure and bulk fill functions
1) Add cryptographically secure random functions to provide
FIPS 140-2 compliant random functions.

2) Add name to random function choice selectors to ease
selection in SOC .defconfig files

3) Add bulk fill random functions.

Signed-off-by: David Leach <david.leach@nxp.com>
2019-11-05 19:36:42 +01:00
Ulf Magnusson
07bf345db3 boards: arm: mps2_an521/musca: kconfig: Clean up BOARD defaults
Putting 'if's directly on the defaults is simpler here.

I'm guessing BOARD should always be "musca_{a,b1}_nonsecure" if it isn't
"musca_{a,b1}", so I removed the condition on the
"musca_{a,b1}_nonsecure" default (turning it into an "else").

Avoiding a top-level 'if'/'depends on' also avoids adding direct
dependencies to the BOARD symbol, which looks a bit neater in the
generated docs (though direct dependencies only matter for symbols that
might be selected/implied).

Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-11-05 19:32:31 +01:00
Sigurd Olav Nevstad
911180368c boards: arm: nrf9160_pca10090: increase reset line wait time
The 1ms wait time has been shown to not be enough. Increasing to 10ms.

This change has been shown to be necessary after
CONFIG_SYS_CLOCK_TICKS_PER_SEC was changed from 128 to 32768
in https://github.com/zephyrproject-rtos/zephyr/pull/16782

Signed-off-by: Sigurd Olav Nevstad <sigurdolav.nevstad@nordicsemi.no>
2019-11-05 11:40:10 +01:00
Fabio Utzig
d6d79933c1 boards: nucleo_wb55: align partition boundaries
This MCU has sectors of size 4096, but some partitions were aligned to
0x800 addresses. MCUBoot detects this incosistency and halts. This patch
fixes the partitions to use properly aligned addresses (multiples of
0x1000).

Signed-off-by: Fabio Utzig <utzig@apache.org>
2019-11-05 08:58:33 +01:00
Ulf Magnusson
1f38ea77ba kconfig: Clean up 'config FOO' (two spaces) definitions
Must've been copy-pasted around.

Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-11-04 17:31:27 -05:00
Ulf Magnusson
bd6e04411e kconfig: Clean up header comments and make them consistent
Use this short header style in all Kconfig files:

    # <description>

    # <copyright>
    # <license>

    ...

Also change all <description>s from

    # Kconfig[.extension] - Foo-related options

to just

    # Foo-related options

It's clear enough that it's about Kconfig.

The <description> cleanup was done with this command, along with some
manual cleanup (big letter at the start, etc.)

    git ls-files '*Kconfig*' | \
        xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /'

Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-11-04 17:31:27 -05:00
Fabio Utzig
86360cb2f7 dts: enable uart3 for frdm_k64f
Building `smp_svr` for this board results in a build error due to
undefined symbols `DT_NXP_KINETIS_UART_4006D000_*` which are related to
uart3 DTS symbols not being generated. This marks uart3's status as OK.

Signed-off-by: Fabio Utzig <utzig@apache.org>
2019-11-04 15:22:04 -06:00
Karsten Koenig
8a6fd43439 boards: riscv: rv32m1_vega: Add onboard SPI flash
Enable the MX25R32 SPI NOR Flash on the VEGAboard and provide board
config file for the spi_flash sample.

Signed-off-by: Karsten Koenig <karsten.koenig.030@gmail.com>
2019-11-04 14:11:18 -06:00
Daniel Leung
265b6ff59e boards: mec15xxevb_assy6853: enable flashing with build command
This utilizes the newly introduced dediprog west flash runner to flash
the image onto the onboard SPI chip.

Signed-off-by: Daniel Leung <daniel.leung@intel.com>
2019-11-03 12:30:45 +01:00
Ulf Magnusson
975de21858 kconfig: Global whitespace/consistency cleanup
Clean up space errors and use a consistent style throughout the Kconfig
files. This makes reading the Kconfig files more distraction-free, helps
with grepping, and encourages the same style getting copied around
everywhere (meaning another pass hopefully won't be needed).

Go for the most common style:

 - Indent properties with a single tab, including for choices.

   Properties on choices work exactly the same syntactically as
   properties on symbols, so not sure how the no-indentation thing
   happened.

 - Indent help texts with a tab followed by two spaces

 - Put a space between 'config' and the symbol name, not a tab. This
   also helps when grepping for definitions.

 - Do '# A comment' instead of '#A comment'

I tweaked Kconfiglib a bit to find most of the stuff.

Some help texts were reflowed to 79 columns with 'gq' in Vim as well,
though not all, because I was afraid I'd accidentally mess up
formatting.

Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-11-01 15:53:23 +01:00
Peter Bigot
51d19cbbee dts: bindings: semtech,sx1509b: add fixed ngpios property
Unlike most other GPIO controllers which support 32 pins this device
only supports 16.  (There is an SX1508B that has 8 pins, but the
driver doesn't support it.)

Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
2019-11-01 07:37:29 +01:00
David B. Kinder
0c8e7eaeef doc: fix refs to non-supported board
Comparing the output of "west boards" with mentions of boards in build
instructions (:board: boardname) found a couple of incorrect board
references.

Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
2019-10-31 16:57:52 +01:00
David B. Kinder
241044f178 doc: fix misspellings in Kconfig files
Fix misspellings in Kconfig files missed during regular reviews.

Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
2019-10-30 10:24:30 +01:00
Henrik Brix Andersen
4c8d127966 drivers: adc: mcux_adc12: use DT_INST defines for instances
Convert the NXP Kinetis ADC12 driver from relying on CONFIG_ADC_n
Kconfig defines to using DT_INST defines for instance configuration.

This resolves the issue of having e.g. ADC12 instances 2 and 3
enabled, but not instance 0.

Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
2019-10-30 09:21:45 +01:00
Manivannan Sadhasivam
89e4ba759e boards: arm: 96b_nitrogen: Add 1.8v Low speed connector support
Add support for 1.8v Low speed connector available on the Wistrio
board inorder to access peripherals in a board independent way.

Following peripherals are supported:

1. 12-GPIOs
2. SPI0
3. UART0

Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
2019-10-30 08:31:46 +01:00
Manivannan Sadhasivam
d9697169d0 boards: arm: 96b_carbon: Add 3.3v Low speed connector support
Add support for 3.3v Low speed connector available on the Carbon
board inorder to access peripherals in a board independent way.

Following peripherals are supported:

1. 8-GPIOs
2. I2C0
3. SPI0
4. UART0
5. UART1

Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
2019-10-30 08:31:46 +01:00
Manivannan Sadhasivam
8f1d8522c0 boards: arm: 96b_wistrio: Add 3.3v Low speed connector support
Add support for 3.3v Low speed connector available on the Wistrio
board inorder to access peripherals in a board independent way.

Following peripherals are supported:

1. 7-GPIOs
2. I2C0
3. UART0

Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
2019-10-30 08:31:46 +01:00
Ulf Magnusson
d768b3ce3f mps2_an521: kconfig: Remove unused TIMER_(D)TMR_CMSDK_APB_(0/1) symbols
Unused since commit 7809970c8a ("drivers: counter: cmsdk: Convert to new
DT_<COMPAT>_<INSTANCE> defines"). Kconfig.defconfig leftover.

Found with a script.

Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-10-30 08:18:02 +01:00
Ulf Magnusson
3b98417ef2 drivers: serial: liteuart: Remove unused UART_LITEUART_PORT_0 symbol
Added in commit f9efca4b4f ("boards: riscv32: add LiteX VexRiscV
board"), then never used.

Found with a script.

Also change UART_LITEUART from a 'menuconfig' symbol to a 'config'
symbol, as it's no longer followed by symbols that depend on it
(UART_LITEUART_PORT_0 should have been a plain 'config' too).

Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-10-29 06:16:27 +01:00
Yannis Damigos
5a601721e6 odroid_go: Enable entropy number generator
Enable entropy number generator

Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
2019-10-29 06:02:33 +01:00
David B. Kinder
9b66efc858 doc: fix misspellings in rst docs
Fix some misspellings missed during regular reviews

Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
2019-10-29 06:01:13 +01:00
Yannis Damigos
d8a5a5ee16 odroid_go/doc: Add supported features section
Add supported features section in board's
documentation.

Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
2019-10-28 06:06:38 -05:00
Yannis Damigos
ed4171b02d odroid_go: Add support for I2C
Add I2C support

Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
2019-10-28 06:06:38 -05:00
Daniel Leung
b7eb04b300 x86: consolidate x86_64 architecture, SoC and boards
There are two set of code supporting x86_64: x86_64 using x32 ABI,
and x86 long mode, and this consolidates both into one x86_64
architecture and SoC supporting truly 64-bit mode.

() Removes the x86_64:x32 architecture and SoC, and replaces
   them with the existing x86 long mode arch and SoC.
() Replace qemu_x86_64 with qemu_x86_long as qemu_x86_64.
() Updates samples and tests to remove reference to
   qemu_x86_long.
() Renames CONFIG_X86_LONGMODE to CONFIG_X86_64.

Signed-off-by: Daniel Leung <daniel.leung@intel.com>
2019-10-25 17:57:55 -04:00
Loic Poulain
1990b8d94b boards: mimxrt1064_evk: Add MT9M114 digital image sensor node
Sensor can be connected to the 24pin camera connector.

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
2019-10-25 15:13:53 -05:00
Loic Poulain
9c72d59874 boards: arm: nxp: mimxrt1064_evk: Enable CSI video support
This enables CSI node, and configures pinmux when driver is enabled.

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
2019-10-25 15:13:53 -05:00
Alberto Escolar Piedras
f974cb0ae1 posix arch: Untangle headers
posix_soc_if.h is meant to be a private header between
the POSIX ARCH, SOC, and maybe boards,
it should not contain definitions meant to be used directly
by the kernel or app.

Some definitions were placed here due to a dependency moebius
loop.
Unravel that by removing all header dependencies in posix_soc_if.h,
move those definitions out to a more logical place,
and while we are here reduce the amount of users of
irq_offload.h in POSIX arch related code

Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
2019-10-25 11:23:49 -07:00
Peter Bigot
e0aad0c94d boards: nrf52_pca20020: add missing accelerometer support
The Thingy:52 has a LIS2DH12 low-power accelerometer on the external
I2C bus.  Add the necessary description to devicetree.

Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
2019-10-25 11:02:58 -05:00
Ulf Magnusson
bd2e7e377a boards: mps2_an521: kconfig: Remove unused PINMUX_MPS2 symbol
Unused since commit 0829ddfe9a ("kbuild: Removed KBuild").
Kconfig.defconfig leftover.

Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-10-25 07:48:27 -05:00
Ulf Magnusson
84da087379 intel_s1000_crb: kconfig: Remove unused I2C_0_DEFAULT_CFG symbol
Unused since commit 7e96ca5d80 ("i2c: Remove non DTS Kconfig params").

intel_s1000_crb probably isn't getting tested in CI, because Kconfiglib
generated a warning for the symbol no longer being given a type, which
would be turned into an error.

Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-10-24 12:55:02 -05:00
Ulf Magnusson
2b61031c8f kconfig: Remove symbol types from Kconfig.defconfig files
Same deal as in commit 7fdb525754 ("kconfig: Use 'default' instead of
'def_bool' in Kconfig.defconfig files"), but I hacked Kconfiglib to also
find cases where the type is given separately as e.g.

    config FOO
            int
            default 3

Motivation (from a note in
https://docs.zephyrproject.org/latest/guides/kconfig/index.html):

    For a symbol defined in multiple locations (e.g., in a
    Kconfig.defconfig file in Zephyr), it is best to only give the
    symbol type for the "base" definition of the symbol, and to use
    'default' (instead of 'def_<type>' value) for the remaining
    definitions. That way, if the base definition of the symbol is
    removed, the symbol ends up without a type, which generates a
    warning that points to the other definitions. That makes the extra
    definitions easier to discover and remove.

It's also nice if 'def_bool' and the like turn into a semi-reliable flag
that the symbol is only defined in Kconfig.defconfig files. That might
be a sign that things could be cleaned up.

Will do a separate pass later to remove some symbols only defined in
Kconfig.defconfig files.

Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-10-24 12:40:22 -05:00
Mohamed ElShahawi
55471982f6 esp32: drivers: Add Entropy Device tree support
- Add TRNG module to esp32.dtsi
- Updated the note about TRNG register address

Signed-off-by: Mohamed ElShahawi <ExtremeGTX@hotmail.com>
2019-10-24 09:09:41 -05:00
Kumar Gala
22e7449b73 kconfig: Introduce typed dt kconfig functions
Replace:
  dt_chosen_reg_addr
  dt_chosen_reg_size
  dt_node_reg_addr
  dt_node_reg_size

with:
  dt_chosen_reg_addr_int
  dt_chosen_reg_size_int
  dt_chosen_reg_addr_hex
  dt_chosen_reg_size_hex
  dt_node_reg_addr_int
  dt_node_reg_size_int
  dt_node_reg_addr_hex
  dt_node_reg_size_hex

So that we get the proper formatted string for the type of symbol.

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-10-24 08:51:06 -05:00
Ulf Magnusson
1f046d86a0 native_posix: kconfig: Fix misplaced USB_NATIVE_POSIX default
Should be within the 'if BOARD_NATIVE_POSIX`, or USB_NATIVE_POSIX will
get enabled whenever USB is (unless a user value overrides it).

Probably didn't cause any problems, since
boards/posix/native_posix/Kconfig.defconfig is only included for this
board.

Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-10-24 09:51:00 +02:00
Ioannis Glaropoulos
f00429cc2f boards: arm: nucleo_g071rb: include MPU in HW features
Include ARM MPU in the list of supported features
in nucleo_g071rb platform.

Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
2019-10-24 09:19:46 +02:00
Scott Worley
c8b1eb79a1 drivers : spi : mec1501 : XEC SPI driver
SPI driver for MEC1501 QMSPI supporting synchronous only.

Signed-off-by: Scott Worley <scott.worley@microchip.com>
2019-10-23 19:18:32 -07:00
Johann Fischer
f00b272711 boards: reel_board: revise SPI routing
Revise SPI routing. Use slower SPI_1 for EPD and
SPI_3 for expansion connector.

Signed-off-by: Johann Fischer <j.fischer@phytec.de>
2019-10-23 20:58:19 -04:00
Johann Fischer
f467f07e14 boards: reel_board: add support for pwm led
Configure the pin connected to edge LED as PWM output.
On the new board version 1507.3 this pin also controls a buzzer.

Signed-off-by: Johann Fischer <j.fischer@phytec.de>
2019-10-23 20:58:19 -04:00
Kumar Gala
9784f800a6 i2c: Rename CONFIG_I2C_[0..5]_NAME -> DT_I2C_[0..5]_NAME
Now that everything is DT based for I2C drivers we can rename the
CONFIG_I2C_[0..5]_NAME define to DT_I2C_[0..5]_NAME.

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-10-23 11:31:32 -05:00
Kumar Gala
669e0f3b32 i2c: Move how we set HAS_DTS_I2C
Now that all I2C drivers utilize DTS we can select HAS_DTS_I2C in a
common place and don't need to do it per driver.

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-10-23 11:31:32 -05:00
Kumar Gala
7e96ca5d80 i2c: Remove non DTS Kconfig params
All drivers utilize DTS now so we can remove the Kconfig params related
to !HAS_DTS_I2C.

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-10-23 11:31:32 -05:00
Kumar Gala
ceffca2c42 boards: arm: mps2: Add LED & Buttons to board dts
Update board dts files to add User LED and Button support.  Also update
the board yaml file to say the boards support gpio.

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-10-23 10:26:56 -05:00
Kumar Gala
28d060513c arm: mps2: Convert gpio to use device tree
Add binding for arm,mps2-fpgaio-gpio and update device tree and change
FPGA GPIO init code to utilize device tree defines.

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-10-23 10:26:56 -05:00
Maureen Helm
65d9f541a7 boards: mimxrt1050_evk: Configure default sdhc instance at board level
Configures the default instance of the sdhc driver for the
mimxrt1050_evk board so applications don't have to configure it
explicitly. Similarly, enables the gpio instance required by the sdhc
driver.

Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2019-10-23 09:49:05 -05:00
Andrei Gansari
e0d7e880f2 boards: MPS2 targets enabled icount
Set qemu parameter for MPS2 targets: -icount auto

Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
2019-10-22 23:06:41 -04:00
Peter Bigot
f8bfc7e175 devicetree: tree-wide: add nexus map properties for arduino headers
We need to be able to specify GPIO flags in devicetree without that
preventing translation from the Arduino specifier to the host GPIO
specifier.  Set up to ignore the low 6 bits of the flags field when
matching the child specifier, and to copy those bits to the parent
specifier.

Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
2019-10-22 14:40:41 -05:00
Mohamed ElShahawi
566d07e00c [ESP32] drivers: Add I2C Device tree support
- Add I2C modules to esp32.dtsi
- I2C Pins and bitrate config moved to esp32.dts

Signed-off-by: Mohamed ElShahawi <ExtremeGTX@hotmail.com>
2019-10-22 08:01:24 -05:00
Peter A. Bigot
1b5ec6a589 boards: nrf52_pca20020: default select ADC instance
Automatically select the ADC_0 instance when ADC is required.

Signed-off-by: Peter A. Bigot <pab@pabigot.com>
2019-10-22 11:09:00 +02:00
Ulf Magnusson
bb3cd11bf1 xtensa: kconfig: Remove unused SW_ISR_TABLE symbol
Unused since commit 6fd6b7e50a ("xtensa: remove legacy arch
implementation").

Found with a script.

Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-10-21 16:15:41 -07:00
Andrew Boie
979b17f243 kernel: activate arch interface headers
Duplicate definitions elsewhere have been removed.

A couple functions which are defined by the arch interface
to be non-inline, but were implemented inline by native_posix
and intel64, have been moved to non-inline.

Some missing conditional compilation for z_arch_irq_offload()
has been fixed, as this is an optional feature.

Some massaging of native_posix headers to get everything
in the right scope.

Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
2019-10-21 10:13:38 -07:00
Daniel Craviee
f7bfa936a1 boards: litex_vexriscv: Enable LiteX SPI driver
This commit enables LiteX SPI driver for litex_vexriscv board.

Signed-off-by: Daniel Craviee <dcraviee@internships.antmicro.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
2019-10-21 08:40:09 -05:00
Ioannis Glaropoulos
14fc43d675 boards: arm: arduino_due: add option to use jlink tool
With this commit we add the option to use jlink for
flashing and running samples & tests on Arduino Due
using jlink. Bossac remains the default option.

Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
2019-10-21 08:35:27 -05:00
Ulf Magnusson
d5633bc395 boards: xtensa: kconfig: Remove unused XTENSA_XTSC_INC symbol
Unused since commit 0829ddfe9a ("kbuild: Removed KBuild").

This symbol is the only thing in boards/xtensa/xt-sim/Kconfig,
which gets included via

    osource "$(BOARD_DIR)/Kconfig"

in boards/Kconfig, so just remove the entire file.

Found with a script.

Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-10-18 17:51:53 -07:00
Manivannan Sadhasivam
56ed28e60f boards: arm: 96b_wistrio: Fix the SoC used on this board
The RAK811 module used on this board incorporates STM32L151CB-A SoC,
which has more RAM (32 KiB) compared to its companion STM32L151CB.
Hence, fix the doc, dts and Kconfig to include correct part number.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2019-10-18 10:40:45 -05:00
Manivannan Sadhasivam
a2760b7b92 boards: arm: 96b_wistrio: Enable on-chip RTC driver
Enable on-chip RTC driver for 96Boards Wistrio board.

Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
2019-10-18 10:40:45 -05:00
Manivannan Sadhasivam
8f7441b58d boards: arm: 96b_wistrio: Enable SPI1
Enable SPI1 available on the expansion header of 96Boards
Wistrio board.

Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
2019-10-18 10:40:45 -05:00
Ioannis Glaropoulos
0f7fe2406c boards: arm: nucleo_g071rb: enable ARM MPU
We enable Memory Protection on stm32 nucleo_g071rb board,
since the respective SoC series implements the ARM MPU.

Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
2019-10-18 08:46:03 -05:00
Pavlo Hamov
e5d7b2bc51 boards: nucleo_wb55: select LSE by default
use LSE as RF clock source on nucleo board

Signed-off-by: Pavlo Hamov <pavlo_hamov@jabil.com>
2019-10-17 14:02:40 -05:00
Ulf Magnusson
ac9fe11f2f Kconfig: Remove copy-pasted comments on some promptless symbols
Remove the

    # Omit prompt to signify a "hidden" option

comments that appear on some symbols. They seem to have been copy-pasted
at random, as there are lots of promptless symbols that don't have them
(that's confusing in itself, because it might give the idea that the
ones with comments are special in some way).

I suspect those comments wouldn't have helped me much if I didn't know
Kconfig either. There's a lot more Kconfig documentation now too, e.g.
https://docs.zephyrproject.org/latest/guides/kconfig/index.html.

Keep some comments that give more information than the symbol having no
prompt.

Also do some minor drive-by cleanup.

Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-10-17 13:05:24 -05:00
Alex Tsamakos
7d7fed0d2b boards: actinius_icarus: change defaults to use new kconfig functions
Change default flash size and offset to use the new kconfig function
`dt_chosen_reg_addr` instead of deprecated `dt_hex_val`

Signed-off-by: Alex Tsamakos <alex@actinius.com>
2019-10-17 08:37:35 +02:00
Francisco Munoz
de1bb01657 boards: mec15xxevb_assy6853: Add Kscan and PS/2 to peripherals
Introduce Kscan and PS/2 to the list of supported peripherals

Signed-off-by: Francisco Munoz <francisco.munoz.ruiz@intel.com>
2019-10-16 13:29:21 -07:00
Francisco Munoz
eb5e97b7ea boards: arm: mec15xxevb_assy6853: Enable Keyboard Scan
Add pinmux and Kconfig switches in order to enable the
keyboard scan matrix driver.

Signed-off-by: Francisco Munoz <francisco.munoz.ruiz@intel.com>
2019-10-16 13:29:21 -07:00
Karl Palsson
79b15e374d boards: add stm32l1 discovery
Tested apps: hello_world, blinky
Tested peripherals: UART, SPI

Signed-off-by: Karl Palsson <karlp@etactica.com>
2019-10-16 14:42:54 -05:00
David B. Kinder
18e28c4e2a doc: use multi-column display for long lists
A style was recently added that will allow long narrow lists to display
as three columns across the page (with a responsive design that
self-adjusts based on screen width).  This looks much better than a long
list that runs down the page.

Adding this directive before a block (or nested under the directive)
will allow the content to be multi-column:

   .. rst-class:: rst-columns

as explained in
https://docs.zephyrproject.org/latest/guides/documentation/index.html
in the Multi-column lists section.

This PR tweaks a few remaining documents that have such long narrow
lists.

Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
2019-10-16 13:02:35 -05:00
Erwan Gouriou
171718ef98 shields: x_nucleo_idb05a1: boards: add stm32mp157c_dk2 configuration
Add configuration file for the stm32mp157c_dk2.
Beacon, Central are working.
Peripheral is not compiling because of .elf exceeding FLASH region,
else should be working.

Signed-off-by: Yaël Boutreux <yael.boutreux@st.com>
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2019-10-15 18:15:55 -05:00
Yaël Boutreux
e48cb1a074 boards: shields: Add x_nucleo_idb05a1
Add shield x_nucleo_idb05a1.
Tested samples with the disco_l475_iot1 (SPI3 disabled to ensure
to test the shield on SPI1, and not the on-board BlueNRG-MS chip):
Beacon, Central and Peripheral have been tested and are working.

Signed-off-by: Yaël Boutreux <yael.boutreux@st.com>
Signed-off-by: Erwan Gouriou <erwang.gouriou@linaro.org>
2019-10-15 18:15:55 -05:00
Andrew Boie
a41c0d2bf9 qemu_x86_long: enable early console
Useful for debugging.

Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
2019-10-15 09:00:49 -07:00
Nick Ward
025901df4f samples: drivers: CAN: Update to build cleanly for MCP2515 driver
Add alternate conf file for MCP2515 so it builds without warning.
Update documentation.

Signed-off-by: Nick Ward <nix.ward@gmail.com>
2019-10-15 15:48:43 +02:00
Nick Ward
04ab99cd54 boards: shields: Add DFRobot CAN bus Shield V2.0
Useful for prototyping designs for the MCP2515 CAN controller

Signed-off-by: Nick Ward <nix.ward@gmail.com>
2019-10-15 15:48:43 +02:00
Nick Ward
e7ec1a501d boards: nrf52840_pca10056: When SPI is required enable SPI_3 by default
Required by Arduino Uno Rev3 shield connector

Signed-off-by: Nick Ward <nix.ward@gmail.com>
2019-10-15 15:48:43 +02:00
Nick Ward
da3402de8f boards: nrf52_pca10040: When SPI is required enable SPI_2 by default
Required by Arduino Uno Rev3 shield connector

Signed-off-by: Nick Ward <nix.ward@gmail.com>
2019-10-15 15:48:43 +02:00
Jose Alberto Meza
3a98d71fdf board: arm: mec15modular_assy6885: Enable RTOS, PS2, PWM and ADC drivers
Enable RTOS, PS2, PWM and ADC for modular MEC15xx
Add extra step to build flashable image.

Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
2019-10-13 07:16:07 -07:00
Erwan Gouriou
5881f118c0 soc: stm32: Enable cortex-m systick timer by default
Move systick activation in soc/ as a Kconfig.defconfig file and
remove activation in boards _defconfig files.
This will allow to deactivate it in a more flexible way
with upcoming LPTIMER as tick source when power management
features are enabled.

Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2019-10-11 14:55:48 -07:00
Tom Burdick
1e919f2b68 boards: nucleo_f446re flash layout
Adds the missing flash partition layout to the board dts

Signed-off-by: Tom Burdick <tom.burdick@electromatic.us>
2019-10-10 11:21:39 -05:00
Tommy Vestermark
99e96da8f5 stm32: stm32_min_dev.dtsi enable use of UART_2 and UART_3
For some reason UART_2 and UART_3 was not marked "okay" in the device
tree, making use difficult.
I have tested both UARTs on a "blue pill" board (stm32_min_dev_blue)
with both polling and RX/TX interrupts and found them to work as
expected.

Signed-off-by: Tommy Vestermark <tovsurf@vestermark.dk>
2019-10-10 11:18:28 -05:00
Erwan Gouriou
628a0336bf boards: stm32: Set arduino gpio connector on nucleo 144 pins boards
Apply same scheme for all nucleo 144 pins boards:
-provide a separate arduino connector dtsi file
-provide complete gpio map
-update board.yaml vs arduino support (i2c, spi and gpio)

Done using following references:
http://www.st.com/resource/en/user_manual/dm00105823.pdf
http://www.st.com/resource/en/user_manual/dm00368330.pdf

Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2019-10-09 18:04:28 -05:00
Alberto Escolar Piedras
b237597ab9 arch: posix: isolate arch-soc/board IF from kernel-arch IF
The POSIX ARCH delegates some of the tasks which normally
are taken care of by the ARCH to the SOC or BOARD levels.

To avoid changes in the kernel-arch IF propagating into
the arch-soc and arch-board interfaces (which would break
off-tree posix boards) isolate them.

Also move arch inlined functions into the arch.h header,
and out from the headers which specify the  posix arch-soc
and arch-board interfaces.

Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
2019-10-09 09:14:18 -04:00
Andrew Boie
f0f700c121 posix: expose z_arch_irq_lock/unlock as inlines
The specification for these arch APIs is to have them inline,
and the bodies were just oneliners calling another function
anyway.

Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
2019-10-09 09:14:18 -04:00
Peter Bigot
6e5db350b2 coccinelle: standardize k_sleep calls with integer timeouts
Re-run with updated script to convert integer literal delay arguments to
k_sleep to use the standard timeout macros.

Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
2019-10-09 08:38:10 -04:00
Alexander Wachter
8b214117ec drivers: CAN: MCP2515: Move OSC frequency definition to device-tree
Move the oscillator frequency definition from Kconfig to device-tree.

Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
2019-10-09 06:27:53 -05:00
Alexander Wachter
ffa59f1327 shields: link_board_can: Fix bus-speed and SPI definition
Set the bus speed to 125000 like the other boards.
Remove the SPI definition.

Move the definition of the oscillator frequency from Kconfig
to the device-tree.

Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
2019-10-09 06:27:53 -05:00
Antony Pavlov
0bb8ec86d7 boards: arm: add support for STM32F030 DEMO board (stm32f030_demo)
Tested samples:

  * hello_world
  * basic/blinky
  * drivers/watchdog (CONFIG_LOG=n)

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
2019-10-08 16:31:48 -05:00
Ioannis Konstantelias
959f3d8d7f boards: arm: stm32_min_dev: Document connection info
Updated connection info and restructered a bit some paragraphs to stay
consistent with the structure of other boards.

Signed-off-by: Ioannis Konstantelias <ikonstadel@gmail.com>
2019-10-08 15:49:15 -05:00
Ioannis Konstantelias
02c73ef002 boards: arm: stm32_min_dev: Remove broken links
Links showing the the variants of the board were broken. Now they are
gone.

Signed-off-by: Ioannis Konstantelias <ikonstadel@gmail.com>
2019-10-08 15:49:15 -05:00
Ioannis Konstantelias
6dd8ce54ab boards: arm: stm32_min_dev: Enhance doc with pinout
Added the pinout diagram for the blue STM32 Minimum Development board.

Signed-off-by: Ioannis Konstantelias <ikonstadel@gmail.com>
2019-10-08 15:49:15 -05:00
David B. Kinder
82d6347355 doc: fix broken file and zephyr-app refs
found some references to files (via :zephyr_file: and :zephyr-app:) that
were moved, so the links were broken

Fixes: #19660

Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
2019-10-08 15:42:32 -05:00
Marti Bolivar
27e5dd131f doc: s/device tree/devicetree/
DTSpec writes this as a single word, presumably to make it easier to
grep for / more precise. Follow along in the rest of the docs now that
our main DT docs page agrees with this usage.

Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
2019-10-08 11:53:40 +02:00
Erwan Gouriou
0a85239d0d boards: nucleo_f103rb: Fix missing include in dts file
Inclusion to arduino gpio connector is missing.

Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2019-10-07 21:50:05 -04:00
Charles E. Youse
3eb1a8b59a arch/x86: (Intel64) implement SMP support
Add duplicate per-CPU data structures (x86_cpuboot, tss, stacks, etc.)
for up to 4 total CPUs, add code in locore and z_arch_start_cpu().

The test board, qemu_x86_long, now defaults to 2 CPUs.

Signed-off-by: Charles E. Youse <charles.youse@intel.com>
2019-10-07 19:46:55 -04:00
Charles E. Youse
8d97750eef arch/x86: (Intel64) add z_arch_curr_cpu() to enable CONFIG_SMP=y
And set qemu_x86_long board to build with CONFIG_SMP=y by default.
Apparently two benchmark tests - latency_measure and sys_kernel -
do not work with the SMP scheduler, so those tests are disabled.

Signed-off-by: Charles E. Youse <charles.youse@intel.com>
2019-10-07 19:46:55 -04:00
Erwan Gouriou
b3bcfcde7e boards: stm32: Set arduino gpio connector on nucleo 64 pins boards
Apply same scheme for all nucleo_64 pins boards:
-provide a separate arduino connector dtsi file
-provide complete gpio map
-update board.yaml vs arduino support (i2c, spi and gpio)

Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2019-10-07 12:51:14 -05:00
Antony Pavlov
cc5125d147 doc: boards: arm: nucleo: fix typo in reference to blinky-sample
The commit fixes blinky sample directory path in documentation.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
2019-10-07 12:35:37 -05:00
NavinSankar Velliangiri
f2163de6ed boards: arm: Add steval_fcu001v1 board support
BSP for steval_fcu001v1 resubmitted as per PR #18746

Signed-off-by: NavinSankar Velliangiri <navin@linumiz.com>
2019-10-07 08:57:36 -05:00
Johann Fischer
d1d683beef shields: add WAVESHARE e-Paper shield
Add WAVESHARE e-Paper shield and support for
GDEH0213B1 and GDEH029A1 displays.

Signed-off-by: Johann Fischer <j.fischer@phytec.de>
2019-10-04 18:49:04 -07:00
Siddharth Chandrasekaran
e14985ed42 boards: stm32_min_dev: dts: set UART2 status okay
doc: add UART and LED section listing the pins; reword I2C section.

Signed-off-by: Siddharth Chandrasekaran <siddharth@embedjournal.com>
2019-10-04 18:44:45 -07:00
Richard Osterloh
df5edf64f6 boards: arm: Add support for Nucleo G431RB board
Nucleo-G431RB board support and description

Signed-off-by: Richard Osterloh <richard.osterloh@gmail.com>
2019-10-04 18:44:24 -07:00
Pavlo Hamov
ad708306c0 boards: nucleo_wb55rg: add omitted code-partition
Add omitted chosen entry. Required for MCUBOOT

Signed-off-by: Pavlo Hamov <pavlo_hamov@jabil.com>
2019-10-04 15:38:10 -05:00
Jose Alberto Meza
7c32bfa645 boards: mchp: Add option to switch GPIO bank voltage
Add KConfig board support to match board jumper settings
Failing to update bank selection will affect GPIOs tied to VTR3

Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
2019-10-04 13:11:08 -07:00
Andrzej Głąbek
32e194be16 boards: nrf: Add pwm-led0 alias in all Nordic DKs with enabled PWM node
The `pwm-led0` alias is required for building fade_led and blink_led
samples. Add a suitable `pwmleds` definition and the mentioned alias
for all Nordic Semiconductor Development Kits that have a PWM node
with "okay" status.

Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-10-04 17:21:32 +02:00
Alberto Escolar Piedras
a5e4d36a8d nrf52_bsim: Require v1.8 of the HW models
The incomming new NRF clock driver requires extra nrf HAL
and drivers functions, which are only supported in the HW models
after version 1.8

Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
2019-10-04 17:15:39 +02:00
Noah Pendleton
d0abd9a104 native_posix: Fix realloc potential leak
Fix a possible leak if `realloc` fails here; check the result of the
`realloc` call before updating the pointer, so it can be freed in the
failure case.

Signed-off-by: Noah Pendleton <noah.pendleton@gmail.com>
2019-10-04 16:33:51 +02:00
Ioannis Glaropoulos
4b24027ba0 boards: arm: nrf51_pca10028: remove board from default boards
Now that we have a QEMU board for Cortex-M0, and set as default,
we do not need to have nrf51_pca10028 as default board.

Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
2019-10-04 13:38:48 +02:00
Ioannis Glaropoulos
9145264ba9 boards: arm: qemu_cortex_m0: implement custom system clock driver
For the qemu_cortex_m0 we implement a custom system clock
driver based on the nRF51 TIMER peripheral. The system
clock is configured to run at 1 MHz frequency.

Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
2019-10-02 21:06:54 -04:00
Ioannis Glaropoulos
ad92194250 boards: arm: qemu_cortex_m0: configure board with own timer driver
This commit configures the qemu_cortex_m0 board to
build with it's custom timer driver, instead of the
default nrf_rtc_timer driver for nRF51x SoCs. It,
additionally, configures a default system clock
frequency to 1MHz, as well as 10 Hz tick frequency.

Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
2019-10-02 21:06:54 -04:00
Ioannis Glaropoulos
9f3e6b9c40 boards: arm: qemu_cortex_m0: adding documentation
This commit adds some documentation for the
newly introduced qemu_cortex_m0 platform.

Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
2019-10-02 21:06:54 -04:00
Ioannis Glaropoulos
3ddd5ebb02 boards: arm: add QEMU support for Cortex-M0
This commit defines qemu_cortex_m0 board, adding
support for Cortex-M0 in QEMU. The added platform
is based on the (nRF51) bbc_microbit board.

Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
2019-10-02 21:06:54 -04:00
Andrew Boie
89d4c6928e kernel: add arch abstraction for irq_offload()
This makes it clearer that this is an API that is expected
to be implemented at the architecture level.

Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
2019-10-01 11:11:42 +02:00
Andrei Emeltchenko
c66b269ae6 boards: mec15xxevb_assy6853: Include counter, adc, watchdog to tests
Add counter, adc and watchdog tests to sanity check for the board.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
2019-09-30 12:20:39 -05:00
Charles E. Youse
200056df2f arch/x86: rename CONFIG_X86_MULTIBOOT and related to CONFIG_MULTIBOOT
Simple naming change, since MULTIBOOT is clear enough by itself and
"namespacing" it to X86 is unnecessary and/or inappropriate.

Signed-off-by: Charles E. Youse <charles.youse@intel.com>
2019-09-29 12:30:34 -07:00
Charles E. Youse
1ffab8a5f2 arch/x86: rudimentary ACPI support
Implement a simple ACPI parser with enough functionality to
enumerate CPU cores and determine their local APIC IDs.

Signed-off-by: Charles E. Youse <charles.youse@intel.com>
2019-09-29 12:30:34 -07:00
Anas Nashif
32a9435ea4 tests: tracing: add tests for tracing features
Mostly build tests now, will be extended to verify CTF output once we
have this feature in sanitycheck.

Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2019-09-27 14:42:22 -04:00
Kamil Piszczek
a320010e4a boards: x86: qemu_x86: adding nvs capability
Added the NVS capability to the QEMU x86 board description.

Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
2019-09-27 10:06:40 -07:00
Daniel Leung
f209af2290 boards: mec15xxevb_assy6853: allow custom SPI config file
This adds a way to specify a custom SPI configuration file to be
used with the image generation tool. For example, this can be
used to reduce the SPI image size to allow faster flashing
(e.g. 512KB instead of 16MB).

Signed-off-by: Daniel Leung <daniel.leung@intel.com>
2019-09-27 11:45:37 -04:00
David B. Kinder
fa9d8e09a0 doc: fix doc, boards, and samples misspellings
Regular scan for misspellings in documentation missed during regular
reviews.

Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
2019-09-27 11:44:00 +02:00
Armando Visconti
214c2e799a board/shields: x-nucleo-iks01a3: configure irq-gpios for lis2mdl
Configure interrupt gpio information (irq-gpios) into the
x-nucleo-iks01a3 shield overlay file.

Signed-off-by: Armando Visconti <armando.visconti@st.com>
2019-09-26 13:42:59 -07:00
Andrzej Głąbek
f43bae38e8 dts: Use separate compatibles for Nordic SPI/SPIM/SPIS peripherals
This commit introduces separate "compatible" strings for DTS nodes
representing different types of Nordic SPI peripherals. Previously
"nordic,nrf-spi" was used for both SPI and SPIM. SPIS was already
handled separately.

Quite a few files need to be touched by this commit but the changes can
be divided into groups of related or very similar ones, distinguishable
by the initial part of the path to the modified file:

* dts/bindings/spi/
  new binding for "nordic,nrf-spim" is added and common fields for all
  3 types of Nordic SPI peripherals are extracted to a shared file

* dts/arm/nordic/
  "compatible" properties in spiX nodes are updated (when there is no
  choice as only one type of SPI peripheral is available) or replaced
  with a comment pointing out that the proper type of peripheral needs
  to be picked at some upper layer

* drivers/spi/
  spi_nrfx_spim driver is updated with the new form of macros generated
  from dts

* boards/
  all spiX nodes in dts files for boards equipped with an nRF chip are
  updated with the proper "compatible" property, according to the type
  of SPI peripheral that is currently selected for the board by the
  corresponding Kconfig choice option (SPI_x_NRF_SPI*)

Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-26 19:13:17 +02:00
Andrzej Głąbek
dd4c57d564 dts: Use separate compatibles for Nordic TWI/TWIM/TWIS peripherals
This commit introduces separate "compatible" strings for dts nodes
representing different types of Nordic TWI peripherals. Previously
"nordic,nrf-i2c" was used for both TWI and TWIM, and TWIS was not
supported.

Quite a few files need to be touched by this commit but the changes can
be divided into groups of related or very similar ones, distinguishable
by the initial part of the path to the modified file:

* dts/bindings/i2c/
  new bindings for "nordic,nrf-twim" and "nordic,nrf-twis" are added
  and the one for "nordic,nrf-i2s" is renamed to "nordic,nrf-twi",
  common fields for all these bindings are extracted to a shared file

* dts/arm/nordic/
  "compatible" properties in i2cX nodes are updated (when there is no
  choice as only one type of TWI peripheral is available) or replaced
  with a comment pointing out that the proper type of peripheral needs
  to be picked at some upper layer

* drivers/i2c/
  both flavors of i2c_nrfx drivers are updated with the new names of
  macros generated from dts

* boards/
  all i2cX nodes in dts files for boards equipped with an nRF chip are
  updated with the proper "compatible" property, according to the type
  of TWI peripheral that is currently selected for the board by the
  corresponding Kconfig choice option (I2C_x_NRF_TWI*)

Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-26 19:13:17 +02:00
Kumar Gala
15724c6cdc arm: v2m_musca_b1: Enable GPIO support
Enable CMSDK GPIO driver on v2m_musca_b1 SoC/Board.  Add LEDs that are
on the board and init the pinmux for those LEDs to work.

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-09-25 22:33:19 -07:00
Kumar Gala
12417cde79 boards: v2m_musca_b1: Add pyocd support
Enable pyocd support on musca-b1 board.

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-09-25 22:33:19 -07:00
Kumar Gala
383f37bd9d boards: v2m_musca: Fix pinmux init for LEDs
Utilize CONFIG_TRUSTED_EXECUTION_NONSECURE to decide if we do pinmux.
This Kconfig option is more useful since we only set the _SECURE
version isn't set if we are ignoring the security mode feature.

Move the LED pinmux setup into the not NONSECURE case.

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-09-25 22:33:19 -07:00
Kumar Gala
4c1a9cb0dc boards: v2m_musca: Fix label for LEDs in devicetree
Change from LD to LED.

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-09-25 22:33:19 -07:00
Kumar Gala
83e28cf40c boards: v2m_musca: Fix GPIO interrupt
Missed the combined interrupt for GPIO.  This is the one we utilize
in the driver.

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-09-25 22:33:19 -07:00
Andrei Emeltchenko
a4c319681c boards: mec15xxevb_assy6853: Enable pwm sanitycheck
Enable following sanitychecks

mec15xxevb_assy6853/samples/basic/servo_motor/sample.servo_motor
mec15xxevb_assy6853/tests/drivers/pwm/pwm_api/peripheral.pwm

Run with: sanitycheck -t pwm -p mec15xxevb_assy6853

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
2019-09-25 13:19:04 -04:00
Andrei Emeltchenko
d7c6aec32a boards: mec15xxevb_assy6853: Add PWM alias for tests
Adding alias allows us to build test tests/drivers/pwm/pwm_api

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
2019-09-25 13:19:04 -04:00
Alex Tsamakos
62cb2a96ab boards: arm: add support for Actinius Icarus board (uC: Nordic nRF9160)
Add support for the Actinius Icarus board (nRF9160)

Signed-off-by: Alex Tsamakos <alex@actinius.com>
2019-09-25 18:49:39 +02:00
Yannis Damigos
6768148cc5 boards/xtensa: Add support for ODROID-GO Game Kit
Add support for ODROID-GO Game Kit

Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
2019-09-25 17:39:42 +02:00
Daniel Leung
511c77474d boards/mec1501: configure pinmux for ADC
This sets the pinmux to do ADC if enabled.

Signed-off-by: Daniel Leung <daniel.leung@intel.com>
2019-09-25 06:12:52 -04:00
Daniel Leung
27319e96c5 boards: mec15xxevb_assy6853: enable ADC in DTS
This enables the ADC block in DTS.

Signed-off-by: Daniel Leung <daniel.leung@intel.com>
2019-09-25 06:12:52 -04:00
Johann Fischer
7a6e7e66db shields: add Adafruit 2.8" TFT Touch Shield v2
Add Adafruit 2.8" TFT Touch Shield v2.

Signed-off-by: Johann Fischer <j.fischer@phytec.de>
2019-09-25 02:35:49 -07:00
Tom Burdick
45c7783b1e boards: arm: Add support for NXP FRDM-K22F board
This adds support for NXP's Freedom K22 board.

Co-authored-by: Sean Nyekjaer <sean.nyekjaer@prevas.dk>
Co-authored-by: Tom Burdick <thomas.burdick@gmail.com>
Signed-off-by: Tom Burdick <thomas.burdick@gmail.com>
2019-09-25 02:18:38 -07:00
Johann Fischer
9820036070 shields: link_board_eth: fix link to product website
Fix link to product website.

Signed-off-by: Johann Fischer <j.fischer@phytec.de>
2019-09-24 18:41:19 -07:00
Andrzej Głąbek
57c6cfc9cd nordic: Use hal/ in all inclusions of nrfx HAL header files
Header files of nrfx HALs are not supposed to be included directly
but only with their names prepended with the hal/ directory (so that
an inclusion of an nrfx HAL header clearly differs from an inclusion
of an nrfx driver header).

Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-24 16:20:16 +02:00
Charles E. Youse
e2a0eb0d1c boards/qemu_x86: remove stale flash reference from qemu_x86_long
The QEMU x86 .dts files were re-arranged before long mode was
merged. We don't need this reference to the flash region anymore.

Signed-off-by: Charles E. Youse <charles.youse@intel.com>
2019-09-23 17:50:09 -07:00
Charles E. Youse
34120b9ee5 boards/x86/gpmrb: disable Multiboot header generation
We don't require this to boot with SBL, so disable for now.

Signed-off-by: Charles E. Youse <charles.youse@intel.com>
2019-09-21 16:43:26 -07:00
Charles E. Youse
3bc79fdf2c arch/x86: refactor APIC timer configuration to SoC level
The APIC is part of the SoC, not the board, so move the defaults down.

Signed-off-by: Charles E. Youse <charles.youse@intel.com>
2019-09-21 16:43:26 -07:00
Kumar Gala
78edc96a25 boards: mec1501modular_assy6885: Reduce image file size
Vastly reduced the image size as the files were extremely large.

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-09-21 13:35:14 -07:00
Kumar Gala
ddfeafa7f7 boards: mec1501modular_assy6885: Reduce image file size
Removed mec15xxevb_assy6853.jpg as its not used and vastly reduced
the image size as the files were extremely large.

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-09-21 13:35:14 -07:00
Jakub Wegnerowski
d57a3634f7 boards: litex_vexriscv: Enable LiteX DNA driver
Enable LiteX DNA ID driver in litex_vexriscv board.

Signed-off-by: Jakub Wegnerowski <jwegnerowski@internships.antmicro.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
2019-09-21 21:36:00 +02:00
Andrei Emeltchenko
5e0bfafcf8 doc: mec15xxevb_assy6853: Correct socket name
Fix incorrect SPI socket name.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
2019-09-20 14:32:12 -04:00
Jose Alberto Meza
437256d17c boards: mec15xxevb: Select physical UART mapped to eSPI host logical port
Map eSPI UART traffic to UART1 on MEC1501 modular board.
Remove unnecessary dts fields

Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
2019-09-20 14:30:40 -04:00
Kumar Gala
f54ab8c4fb arm: v2m_musca: Enable GPIO support
Enable CMSDK GPIO driver on v2m_musca SoC/Board.  Add LEDs that are on
the board and init the pinmux for those LEDs to work.

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-09-20 10:05:18 -05:00
Kumar Gala
30795143c4 boards: v2m_musca: Add pyocd support
Enable pyocd support on musca-a1 board.

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-09-20 10:05:18 -05:00
Daniel Leung
e85407db41 board: mec15xxevb_assy6853: generate flashable image
This adds an extra step at the end of build to generate a flashable
image using Microchip tool available at:
https://github.com/MicrochipTech/CPGZephyrDocs

Signed-off-by: Daniel Leung <daniel.leung@intel.com>
2019-09-20 09:09:51 -04:00
Daniel Leung
e17cc8b4cd boards: mec15xxevb_assy6853: enable PWM in DTS
This enables the PWM blocks in DTS. Only PWM0 has been enabled
and tested due to board/jumper configurations.

Signed-off-by: Daniel Leung <daniel.leung@intel.com>
2019-09-19 20:45:37 -04:00
Daniel Leung
2c3d287794 boards/mec1501: Configure pinmux relevantly for PWM
Each and every instance has a specific pin.

Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
2019-09-19 20:45:37 -04:00
Vincent Wan
aeb8d017b5 drivers: timer: add RTC support as system clock for CC13X2/CC26X2
Add RTC timer driver for CC13X2/CC26X2, and use it instead of systick
as system clock. It is necessary to use this timer for power
management support, so that the system can exit from deep sleep upon
expiry of timeouts.

Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
2019-09-19 13:43:10 -05:00
Andrei Emeltchenko
cf7555a841 boards: mec15xxevb_assy6853: Correct jumper settings
Correct jumper settings.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
2019-09-19 14:40:35 -04:00
Takumi Ando
3759aa5aa2 tests: degu_evk: add adc test
Add degu_evk to ADC test

Signed-off-by: Takumi Ando <takumi.ando@atmark-techno.com>
2019-09-19 12:06:56 -05:00
Takumi Ando
cb7f9a0f3a boards: arm: add Degu Evaluation Kit
Added config for https://open-degu.com/en/

Signed-off-by: Takumi Ando <takumi.ando@atmark-techno.com>
2019-09-19 12:06:56 -05:00
Armando Visconti
7506188ea0 boards: arm: Add support for SensorTile.box board
The SensorTile.box is a board designed for IoT applications
embedding a wide range of intelligent low power MEMS sensors,
a STM32L4 microcontroller to manage sensor configuration and
process sensor output data, a micro-USB battery charging
interface and an ST Bluetooth Low Energy module for wireless
communication with a BLE-enabled smartphone.

Signed-off-by: Armando Visconti <armando.visconti@st.com>
2019-09-19 09:47:45 -05:00
Erwin Rol
8bc76b0480 boards: arm: olimex_stm32_p405: Add CAN1 support
Add support for CAN on pins PB8 (CAN1_RX) and PB9 (CAN1_TX).

Signed-off-by: Erwin Rol <erwin@erwinrol.com>
2019-09-19 08:52:53 -05:00
Johann Fischer
b233ab8bad boards: reel_board: add expansion board link board BASE
Add expansion board link board BASE.

Signed-off-by: Johann Fischer <j.fischer@phytec.de>
2019-09-18 22:30:15 -04:00
Johann Fischer
11e745e8d6 boards: reel_board: update board images and minor docu fixes
Update board images and minor docu fixes.

Signed-off-by: Johann Fischer <j.fischer@phytec.de>
2019-09-18 22:30:15 -04:00
Johann Fischer
676871d8e0 boards: reel_board: add note about new display
Add note about new display.

Signed-off-by: Johann Fischer <j.fischer@phytec.de>
2019-09-18 22:30:15 -04:00
Johann Fischer
ce1ef72448 boards: reel_board: add support for reel board v2
Add support for reel board v2.

Signed-off-by: Johann Fischer <j.fischer@phytec.de>
2019-09-18 22:30:15 -04:00
Johann Fischer
8dcd06ff7c drivers: ssd16xx: use bytestring property for LUT and parameters
Use bytestring property for LUT, gdv, sdv and
softstart parameter.

Signed-off-by: Johann Fischer <j.fischer@phytec.de>
2019-09-18 15:00:38 -05:00
David B. Kinder
f6521290e6 doc: replace hlist with column-width class
For long lists of items, it's better to use a multi-column display to
make better use of the screen space.  We used the hlist directive to
accomplish list, but it has a drawback on small (phone) screens because
under the hood, the rendering is done using tables.

Instead, we can take advantage of built-in CSS multi-column support
available in recent browsers.  So, convert uses of the hlist directive
to use an rst-class directive to apply a multi-column class to
the entity. The chosen column-width (18em) gives us a 3-column display
on typical window sizes, but will adjust to more or fewer columns
depending on the actual real estate available.

Also, update the documentation guidelines to mention this change.

Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
2019-09-18 13:33:37 -04:00
Pavlo Hamov
ce8afc1209 samples: ili9340: add STM32F429 disco support
Extend display sample

Signed-off-by: Pavlo Hamov <pavlo_hamov@jabil.com>
2019-09-18 06:43:47 -05:00
Pavlo Hamov
97e1ad1b8c boards: stm32f429i_disc1: add SPI5 support
Add support of RCC configuration.
Add pinmux items

Signed-off-by: Pavlo Hamov <pavlo_hamov@jabil.com>
2019-09-18 06:43:47 -05:00
Francisco Munoz
35590daeaa boards: mec15xxevb_assy6853: Enable PS/2 devices
Enable PS/2 instances in dts and mux data and clk pins.
It also contains new Kconfig switches for the PS/2 controller

Signed-off-by: Francisco Munoz <francisco.munoz.ruiz@intel.com>
2019-09-18 13:23:52 +08:00
Charles E. Youse
af8df4f764 boards/x86/qemu_x86: remove stale reference to HPET_TIMER_IRQ
This config option is no longer present since HPET moved to DT.

Signed-off-by: Charles E. Youse <charles.youse@intel.com>
2019-09-18 00:29:18 +08:00
Charles E. Youse
3038209695 drivers/timer/hpet.c: migrate to devicetree
This driver was still using CONFIG_* values to determine its address,
IRQ, etc. Add a binding for an "intel,hpet" device and migrate this
driver to devicetree.

Fixes: #18657

Signed-off-by: Charles E. Youse <charles.youse@intel.com>
2019-09-17 22:37:09 +08:00
Jose Alberto Meza
3d0ae03570 boards: Add support for MEC1501 modular card ASSY 6885
This was tested with the hello world application.

Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
2019-09-17 20:48:24 +08:00
Kumar Gala
17dc9e56cc boards: native_posix: Disable default testing on native_posix_64
Enabling of testing/default impacts all PR CIs.  There isn't that much
extra value for all PRs to have both native_posix and native_posix_64.
Go with native_posix, since most targets are 32-bit on Zephyr.

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-09-17 20:44:14 +08:00
Watson Zeng
fd17b86b94 arc: hsdk: add lvgl support for hsdk board
The ARC HSDK board provides an Arduino shield interface,
we can use it for TFT TOUCH SHIELD.

Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
2019-09-17 20:40:38 +08:00
Watson Zeng
9eb379f2bf arc: hsdk: add pinmux driver support and doc enhancement
* add pinmux driver. hsdk board has arduino, mikrobus and
  pmod interfaces, which can be confiured for different function,
  such as: gpio, spi, uart, iic.
* add introduction for arduino, mikrobus and pmod interfaces.

Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
2019-09-17 20:40:38 +08:00
Johann Fischer
d479eb4c3e shields: ssd1306_128x64: fix documentation
Fix small mistakes in the documentation.

Signed-off-by: Johann Fischer <j.fischer@phytec.de>
2019-09-17 06:49:37 -05:00
Johann Fischer
73ee79d2fe shields: add generic shield for SSD1306 based 128x32 displays
Add generic shield for SSD1306 based 128x32 pixel
monochrome displays.

Signed-off-by: Johann Fischer <j.fischer@phytec.de>
2019-09-17 06:49:37 -05:00
Johann Fischer
2388e3169c drivers: ssd1306: add DT properties to support 128x32 display
Add DT properties to support 128x32 display.

Fixes: #13725

Signed-off-by: Johann Fischer <j.fischer@phytec.de>
2019-09-17 06:49:37 -05:00
Bruno TISSERAND
1911a7599c boards: Add support of arduino connector on nucleo_wb55rg board
Add the support of the Arduino connector on nucleo_wb55rg board

Signed-off-by: Bruno TISSERAND <bruno.tisserand@st.com>
2019-09-16 15:13:33 -05:00
Christian Taedcke
1c91a385b1 boards/arm: Add arduino_header support to nucleo f429zi
Add arduino_header support to nucleo f429zi board.
Create a dedicated connector file to hold arduino connector
information for nucleo_f429zi board.
Add missing arduino_spi feature to yaml file.

Signed-off-by: Christian Taedcke <hacking@taedcke.com>
2019-09-16 14:47:29 -05:00
Charles E. Youse
640c5a5e95 boards/x86: add Intel64 (64-bit long-mode) QEMU target board
Add qemu_x86_long board (with CONFIG_X86_LONGMODE=y) for testing.

This requires adding support to soc/ia32 for long mode (trivial),
and adding a quick 64- to 32-bit ELF conversion before invoking
QEMU, which apparently doesn't like 64-bit kernel files.

Signed-off-by: Charles E. Youse <charles.youse@intel.com>
2019-09-15 11:33:47 +08:00
Piotr Mienkowski
844d5b403c boards: provide default SWO freq for efr32_slwstk6061a
The commit provides default SWO frequency value for efr32_slwstk6061a
board. The SWO frequency is limited by board hardware to 875 kHz.

Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
2019-09-14 07:35:23 -05:00
Kumar Gala
29e55d74e8 rtc: Remove old rtc functionality
Remove the old rtc functionality as its been deprecated for 2 releases
now.

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-09-14 07:33:38 -05:00
Tomasz Bursztyka
403e6f1b99 soc/arm: Add a fixup for counter/alarm sample to compile with MEC1501
There are 2 other timers that could be selected, let's just take the
first 32bits one. This should be sufficient to verify the driver.

Enabling the timer in relevant board's dts file as well.

Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2019-09-14 12:13:49 +08:00
Kumar Gala
54f81a670b kconfig: hifive1_revb: Convert to use new kconfigfunctions
Convert use of dt_hex_val to dt_node_reg_addr.  As we want to
remove dt_hex_val.

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-09-13 11:42:34 -05:00
Kumar Gala
8ce0cf0126 kconfig: Convert device tree chosen properties to new kconfigfunctions
Convert how we get the various chosen properties like "zephyr,console"
to use the new kconfig functions like dt_chosen_to_label.

Because of how kconfig parses things we define a set of variables of the
form DT_CHOSEN_Z_<PROP> since comma's are parsed as field seperators in
macros.

This conversion allows us to remove code in gen_defines.py for the
following chosen properties:

zephyr,console
zephyr,shell-uart
zephyr,bt-uart
zephyr,uart-pipe
zephyr,bt-mon-uart
zephyr,uart-mcumgr
zephyr,bt-c2h-uart

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-09-13 11:42:34 -05:00
Scott Worley
6be78f36df soc : arm : microchip_mec Move custom busy wait config to MEC1501 SoC
Configuration item custom busy wait is required for all MEC1501
series if its RTOS timer driver is enabled. We moved the selection
of the timer from board level to MEC1501 SoC level.
Frequency selection remains at the board level.

Signed-off-by: Scott Worley <scott.worley@microchip.com>
2019-09-13 09:55:59 +02:00
Maureen Helm
b948fe6037 soc: nxp_lpc: Enable mpu on the lpc54114 m4 core
Enables the arm v7m mpu on the lpc54114 m4 core. Reuses the mpu
configuration from the i.mx rt, which has the same mpu.

Tested on hardware with tests/kernel/mem_protect

Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2019-09-13 09:16:26 +02:00
Piotr Mienkowski
b5b895df8d boards: add "User LED" to arduino_due board DTS
This commit adds user yellow LED to arduino_due board DTS.

Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
2019-09-12 13:25:30 -05:00
Piotr Mienkowski
d8fa80ffd7 boards: update arduino_due to use gpio_sam driver
Update configuration of arduino_due board to use a common gpio_sam
driver rather than sam3x specific gpio_atmel_sam3. The gpio_atmel_sam3
driver is going to be deprecated.

Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
2019-09-12 13:25:30 -05:00
Erwan Gouriou
121148e4d7 boards/shields: Enable shields samples on stm32mp157c_dk2
stm32mp157c_dk2 Arduino header lack A2 and A3 pins which
are assigned to non GPIO pins.
Remove optional shields properties that are using one of these
pins by providing board overlays to the impacted shields.

Fixes #19079


Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2019-09-12 13:21:25 -05:00
Robert Weber
3a3eb0e3af boards: nucleo_wb55rg: Rename documentation file to match board name
Rename doc/nucleowb55rg.rst to doc/nucleo_wb55rg.rst so the file name
matches the name of the board it is documenting.

Signed-off-by: Robert Weber <robertweber95@gmail.com>
2019-09-12 13:21:06 -05:00
Robert Weber
772b5abae1 boards: nucleo_wb55rg: Enable IWDG
Enable the independent watchdog on the nucleo_wb55rg

Signed-off-by: Robert Weber <robertweber95@gmail.com>
2019-09-12 13:21:06 -05:00
Erwan Gouriou
5a12d51285 boards: Clean up references to env variable PROJECT_SOURCE_DIR
As recommended in cmake/app/boilerplate.cmake, ZEPHYR_BASE should
be preferred to PROJECT_SOURCE_DIR.
Do the change for all boards still referring to PROJECT_SOURCE_DIR.

Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2019-09-12 13:16:16 -05:00
Erwan Gouriou
25b0c04b5d boards: nucleo_wb55rg: Add missing flag around SPI _NSS pin definition
Kconfig symbol SPI_STM32_USE_HW_SS is used to control NSS pin
enabling.

Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2019-09-12 09:02:15 -05:00
Erwan Gouriou
e0c2b16b29 boards: stm32h747i_disco: Minor fixes
* Exlude _m4target from net tests as they assume SERIAL is enabled,
which is not the case (yet).
Fixes: #19065
* Zephyr drivers headers were moved from include/ to include/drivers.
Update pinmux.h path to the new location.
* Add missing status line on joystick_left dts node.

Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2019-09-12 09:02:15 -05:00
Erwan Gouriou
a0feae0382 boards: nucleo_f103rb: fix dts file
Minor fix


Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2019-09-12 09:02:15 -05:00
Erwan Gouriou
0a3f82da9a boards: nucleo_f411re: Fix to default configuration
Fix nucleo_f411re default configuration by deactivating I2C support.
Additionally fix wrong comment and end of file.

Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2019-09-12 09:02:15 -05:00
Erwan Gouriou
e5380258b6 dts/Kconfig: Remove unused HAS_DTS_ETHERNET
Symbol not used clean it up.

Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2019-09-12 08:16:42 -05:00
Armando Visconti
b7944510a4 dts/bindings: sensors: remove '-magn' extension from lis2mdl name
The LIS2MDL is not a combo device, but pure magnotemeter.
Hence, '-magn' extension is not adding information and can
be removed from dts compatible name as well as binding filename.

Instead specify '-i2c' or '-spi' to distinguish between the names.

Signed-off-by: Armando Visconti <armando.visconti@st.com>
2019-09-12 07:58:34 -05:00
Andrew Boie
ab1075f0d9 board: qemu_nios2: set yaml RAM/ROM size
This emulated board has 128KB each of flash and SRAM.

Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
2019-09-12 05:17:39 -04:00
Johann Fischer
3ee09abfff shields: add link board ETH
Add link board ETH.

Signed-off-by: Johann Fischer <j.fischer@phytec.de>
2019-09-12 11:30:19 +03:00
Johann Fischer
4309030ea8 boards: reel_board: add arduino spi, uart and i2c nodes
Add arduino spi, uart and i2c nodes.

Signed-off-by: Johann Fischer <j.fischer@phytec.de>
2019-09-12 11:30:19 +03:00
Andrew Boie
6fd6b7e50a xtensa: remove legacy arch implementation
We re-wrote the xtensa arch code, but never got around
to purging the old implementation.

Removed those boards which hadn't been moved to the new
arch code. These were all xt-sim simulator targets and not
real hardware.

Fixes: #18138

Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
2019-09-12 01:26:34 -04:00
Ioannis Konstantelias
4bda345685 boards: arm: nucleo_{f401re, l496zg}: Enable WWDG
Added support for System Window Watchdog.

Signed-off-by: Ioannis Konstantelias <ikonstadel@gmail.com>
2019-09-11 22:13:36 -05:00
Charles E. Youse
ee525c2597 arch/x86: inline x2APIC EOI
From the Jailhouse days, this has been a function call. That's silly.
We now inline the EOI in the ISR when in x2APIC mode. Also clean up
z_irq_controller_eoi(), so it now uses the inline macros.

Also, we now enable x2APIC on up_squared by default.

Fixes: #17133

Signed-off-by: Charles E. Youse <charles.youse@intel.com>
2019-09-12 09:53:45 +08:00
Andrew Boie
9df9994572 x86: fix XIP SOC support and defaults
XIP support in x86 was something of a mess. This
patch does the following:

- Generic ia32 SOC no longer defines a "flash" region
  as generic X86 devices don't have a microcontroller-
  like concept of flash. The same has been done for apollo_lake.
- Generic ia32 and apollo_lake SOCs starts memory at 1MB.
- Generic ia32 SOC may optionally have CONFIG_XIP enabled.
  The board definition must provide a flash region definition
  that gets exposed as DT_PHYS_LOAD_ADDR.
- Fixed definitions for RAM/ROM source addresses in ia32's
  linker.ld when XIP is turned off.
- Support for enabling XIP on apollo_lake SOC removed, there's
  no use-case.
- acrn and gpmrb boards have flash and XIP related definitions
  removed.
- qemu_x86 has a fake flash region added, immediately after system
  RAM, for use when XIP is enabled. This used to be in the ia32 SOC.
  However, the default for qemu_x86 is to now have XIP disabled.
- Fixed tests/kernel/xip to run by default on boards that enable
  XIP by default, plus an additional test to exercise XIP on
  qemu_x86 (which supports it but has XIP switched off by default)

The overall effect of this patch is to:

- Remove XIP configuration for SOC/boards where it does not make
  any sense to have it
- Support testing XIP on qemu_x86 via tests/kernel/xip, but leave
  it off by default for other tests, to ensure it doesn't bit-rot
  and that the system works in both scenarios.
- XIP remains an available feature for boards that need it.

Fixes: #18956

Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
2019-09-11 21:11:38 -04:00
Kumar Gala
702325ddb2 boards: Add arduino_gpio & and arduino_i2c to board supported
Update a number of boards that have arduino_gpio and arduino_i2c
support in their dts files to show that they support that in the
board.yaml file.  This allows coverage on several shield tests that
utilize the tags 'arduino_gpio' and 'arduino_i2c'.

Exlucde stm32mp157c_dk2 from some of the samples right now since the
connector on the board doesn't support A2/A3.  Also remove the duplicate
of exluding disco_l475_iot1.

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-09-11 11:51:25 -05:00
Filip Brozovic
3fe53db5cb boards: arm: frdm_k82f: add support for the NXP FRDM-K82F board
Add support for the NXP FRDM-K82F development board. This board
features an NXP MK82FN256VLL15 CPU, a user RGB LED and two buttons,
two 32 Mb QSPI flashes, Arduino R3 compatible headers, and a FlexIO
header.

Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
2019-09-11 09:23:28 -05:00
Filip Brozovic
8d36defbe2 boards: arm: mimxrt1015_evk: enable lpuart4 only if BT_UART is enabled
Since lpuart4 is enabled by default on mimxrt1015_evk but not configured
in the device tree, this leads to a build error after adding the
instance to the lpuart driver. Adjust the mimxrt1015_evk to be the same
as other mimxrt evk boards and enable the lpuart only if BT_UART is
enabled.

Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
2019-09-11 09:23:28 -05:00
Joris Offouga
0e038bc6d7 boards: arm: Add support for Pico-Pi i.MX7D board
This patch is to add support for the Pico-Pi board which has an i.MX7D
Dual SoC.
The Zephyr is running on the Cortex M4 core and the following features
were validated on this board:

* UART: Zephyr console

Signed-off-by: Joris Offouga <offougajoris@gmail.com>
2019-09-11 08:47:53 -05:00
Mohamed ElShahawi
bcd9e49f3f drivers: esp32: UART - use dts config for HW flow Control
- dts updated for UART1/2
- Additional check added to _INIT macro to configure flow control mode
- Additional check added to _INIT macro to set CTS/RTS gpios values
- Additional check added for gpio config

Signed-off-by: Mohamed ElShahawi <ExtremeGTX@hotmail.com>
2019-09-11 07:50:20 -05:00
Mohamed ElShahawi
2d035c4191 drivers: esp32: Add UART Driver with FIFO/Interrupt support
- Fixes #3981
- Implement UART Polling functions
- Implement UART Interrupt APIs
- Remove dependency on esp32_rom_uart_xxx functions
- Update Device tree with UART addresses and pin config
- Update ESP32 UART KConfig

Notes about implementation:
- Interrupts now defined as a local macros, and should be removed
later on, when interrupts for esp32 are supported in dts

- Threshold interrupts are used for TX/RX
- Reseting FIFOs using _RST bit will corrupt FIFO of UART2 when used for
UART1 and vice-versa, so a generic way is used for all three UARTs

- Old Silicon rev is not supported

Signed-off-by: Mohamed ElShahawi <ExtremeGTX@hotmail.com>
2019-09-11 07:50:20 -05:00
Kumar Gala
b546ef3748 drivers: audio: tlv320dac310x: Explicitly set GPIO_DIR_OUT
As a precursor to the new GPIO API in which GPIO_DIR_OUT isn't a dts
flag move setting of GPIO_DIR_OUT from the dts to explicitly in the
code.  We remove setting the flag in intel_s1000_crb.dts as part of this
cleanup.

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-09-11 05:16:09 -05:00
Neill Kapron
6225592e27 SOC: Boards: NXP: Enable ethernet for mimxrt1060_evk
This enables ethernet functionality on the mimxrt1062 SOC
and mimxrt1060_evk board.

Signed-off-by: Neill Kapron <nkapron@gmail.com>
2019-09-10 07:44:08 -05:00
Johann Fischer
dfee33f861 shields: x_nucleo_iks01a2: add missing irq-gpios properties
Add missing irq-gpios properties.

Signed-off-by: Johann Fischer <j.fischer@phytec.de>
2019-09-10 06:40:27 -05:00
Vincent Wan
89930a4259 boards: cc3235sf_launchxl: use OpenOCD from Zephyr SDK
We should use OpenOCD from the latest Zephyr SDK as opposed to using TI
OpenOCD.

There is a known issue with the current release (0.10.2) of the SDK in
how it resets the network processor, but we can deal with it
subsequently.

Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
2019-09-10 10:22:30 +03:00
Vincent Wan
8afe649144 boards: cc3235sf_launchxl: add support for TI CC3235SF LaunchPad
This commit adds the TI CC3235SF LaunchPad as a new board in Zephyr.

Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
2019-09-10 10:22:30 +03:00
Nick Ward
b130633255 boards: nrf52_pca10040: Add Arduino header definition to DTS
Expose the Arduino R3-compatible pin definition as DTS
for the nrf52_pca10040 board.

Signed-off-by: Nick Ward <nick.ward@setec.com.au>
2019-09-08 17:16:01 -04:00
Nick Ward
c6ca48382e boards: nrf52_pca10040: Fix Arduino SPI pin assignment
Moved arduino_spi to spi2
Set sck-pin in arduino_spi correctly as pin 25
Moved disabled spi0 miso pin assignment to pin 28

Signed-off-by: Nick Ward <nick.ward@setec.com.au>
2019-09-08 17:16:01 -04:00
Jan Van Winkel
48206d1339 native: dts: Added label for flash-controller
Added a label for flash-controller@0

Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
2019-09-08 12:35:39 +02:00
Kamil Piszczek
16d45a8a14 boards: qemu_x86: adding missing flash definitions
Added missing flash definitions.

Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
2019-09-08 12:35:15 +02:00
Ulf Magnusson
50b9b1249b scripts: Simplify code with sys.exit(<string>)
Promote a handy and often-overlooked sys.exit() feature: Passing it a
string (or any other non-int object) prints it to stderr and exits with
status 1.

See the documentation at
https://docs.python.org/3/library/sys.html#sys.exit.

This indirectly prints some errors to stderr that previously went to
stdout.

Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-09-08 12:34:16 +02:00
Johann Fischer
eea99367e4 shields: add generic shield for SSD1306 based 128x64 displays
Add generic shield for SSD1306 based 128x64 pixel
monochrome displays.

Signed-off-by: Johann Fischer <j.fischer@phytec.de>
2019-09-07 17:15:51 +02:00
Johann Fischer
817d042009 boards: frdm_k64f: add arduino i2c node
Add arduino i2c node.

Signed-off-by: Johann Fischer <j.fischer@phytec.de>
2019-09-07 17:15:51 +02:00
Charles E. Youse
6767563f94 arch/x86: remove support for IAMCU ABI
This ABI is no longer required by any targets and is deprecated.

Signed-off-by: Charles E. Youse <charles.youse@intel.com>
2019-09-07 10:07:42 -04:00
Alberto Escolar Piedras
3817cc6fdd native_posix & nrf52_bsim: Add z_arch_irq_connect_dynamic()
Add support for CONFIG_DYNAMIC_INTERRUPTS
in both native_posix and the nrf52_bsim

Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
2019-09-07 10:03:19 -04:00
Ulf Magnusson
9c4400fb51 intel_s1000_crb: messenger.py: Fix 3-space indentation
Accidental 3-space instead of 4-space indent.

Fixing pylint warnings for a CI check.

Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-09-07 08:14:09 -04:00
Ulf Magnusson
16ca6a76da intel_s1000_crb: messenger.py: Simplify loops to fix pylint warnings
Simplify two loops in create_memread_cmd() by looping over elements
instead of indices, to fix two pylint warnings.

Fixing warnings for a CI check.

Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-09-07 08:13:41 -04:00
Ulf Magnusson
4d207895b4 intel_s1000_crb: scripts: Remove '== False/True' tests
Fix pylint warnings like these:

    Comparison to True should be just 'expr' (singleton-comparison)
    Comparison to False should be 'not expr' (singleton-comparison)

I checked that GPIO.read() only returns True/False in the
python-periphery docs.

Getting rid of pylint warnings for a CI check.

Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-09-07 08:07:57 -04:00
Ulf Magnusson
e3ff959d30 intel_s1000_crb: messenger.py: Make endian_swap() static
Doesn't use 'self'. Fixes this pylint warning:

    boards/xtensa/intel_s1000_crb/support/messenger.py:50:4: R0201:
    Method could be a function (no-self-use)

If this function is meant to be internal to messenger.py, then a better
option than @staticmethod might be to turn it into a regular function.

Fixing pylint warnings for a CI check.

Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-09-07 08:04:15 -04:00
Ulf Magnusson
0d39a10fbb scripts: Fix random typo'd whitespace
Reported by pylint's 'bad-whitespace' warning.

Not gonna enable this warning in the CI check, because it flags stuff
like deliberately aligning assignments and gets too cultish. Just a
cleanup pass.

For whatever reason, the common convention in Python is to skip spaces
around '=' when passing keyword arguments and giving default arguments:

    f(x=3, y=4)
    def f(x, y=8):
        ...

Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-09-07 07:54:17 -04:00
David B. Kinder
168751a7b7 doc: fix broken doc links
The project's README.rst references the support board docs with an URL
that's not working these days (see
https://github.com/zephyrproject-rtos/infrastructure/issues/134) so fix
that URL reference.  While looking for other similar linking cases, I
found a hard URL references that should be using :ref: role, and a
release notes reference to a (now) broken link (fixing that in the
/latest/ version of the 1.10 release notes).

Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
2019-09-06 16:14:39 +02:00
David B. Kinder
891e50e088 doc: fix misspellings in documentation
Fix some misspellings found in .rst files missed during regular reviews.

Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
2019-09-06 16:13:15 +02:00
Kevin Townsend
79f362760e arm: mps: docs: note on qemu usage of boards
This commit adds a note alluding to the fact that these two boards are
primarily included for use with QEMU, but have been tested on actual
hardware as well where appropriate.

Signed-off-by: Kevin Townsend <kevin@ktownsend.com>
2019-09-05 15:53:48 +02:00
Kevin Townsend
03f14f2e6c arm: mps: docs: note on qemu usage of boards
This commit adds a note alluding to the fact that these two boards are
primarily included for use with QEMU, but have been tested on actual
hardware as well where appropriate.

Signed-off-by: Kevin Townsend <kevin@ktownsend.com>
2019-09-05 15:53:48 +02:00
Charles E. Youse
c02288b245 docs: fix errors/ambiguities in docs for Apollo Lake boards
The documentation for the GPMRB incorrectly made reference to the
up_squared board in its high-speed UART configuration section. We
consolidate the related documentation for all boards based on the
Apollo Lake SoC and adjust the language to be more generic.

Fixes: #18808

Signed-off-by: Charles E. Youse <charles.youse@intel.com>
2019-09-04 10:02:25 +02:00
Scott Worley
26c411f6bd drivers : timer : MEC1501 RTOS timer load delay work-around.
MEC1501 RTOS timer internal counter is on the 32KHz clock domain.
The register interface is on the AHB clock. When the timer is started
hardware synchronizes to the next 32KHz clock edge resulting is a
variable delay moving the value in the preload register into the
count register. The maximum delay is one 32KHz clock period (30.5 us).
We work-around this delay by checking if the timer has been started
and not using the count value which is still 0. Instead we state zero
counts have elapsed.

Signed-off-by: Scott Worley <scott.worley@microchip.com>
2019-09-03 18:37:46 +02:00
David B. Kinder
60136f00cb doc: add how to exit from QEMU in samples
While trying out the hello_world sample built for QEMU, I was expecting
the sample app to exit and I'd return to a command prompt.  Nope.  You
need to exit QEMU manually, so add that step to the sample instructions.
Looking around, there are more uses of QEMU like this that could use
this added step after running the sample app.

Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
2019-09-02 12:06:08 -04:00
Daniel Leung
1668ed70c9 doc: fix files mis-named as PNG files
There are a few non-PNG (JPEG and WebP) files that are being
name as PNG files. This causes pdflatex/latexmk to fail due
to them not actually being PNG files. So rename those files
with correct extensions and update the RST files.

Also converted the WebP file in JPEG as PDFLatex cannot parse
WebP image.

Signed-off-by: Daniel Leung <daniel.leung@intel.com>
2019-09-02 13:02:08 +02:00
Karsten Koenig
0fb736abfa boards: shields: link_board_can: status ok->okay
This file was added after the mass status 'ok'->'okay' rename. This
rectifies the situation, in particular as 'ok' is not ok anymore.

Signed-off-by: Karsten Koenig <karsten.koenig.030@gmail.com>
2019-08-30 08:53:59 +02:00
Kumar Gala
c346a62dbb doc: shields: frdm_kw41z: Add shield to header
Add 'Shield' to the header to help distinguish the FRDM-KW41Z general
board docs from the shield docs.

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-08-29 19:50:15 +02:00
Vincent Wan
39bb8d5205 doc: boards: cc3220sf_launchxl: update docs for Zephyr 2.0
This commit updates the documentation in preparation for the imminent
release of Zephyr 2.0.

Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
2019-08-29 10:21:49 -05:00
Loic Poulain
ee8c661455 boards: arm: disco_l475_iot1: Enable MSI PLL mode for USB
The MSI PLL mode has been disabled but can be used since LSE is
populated on disco_l475_iot1 board. This is requested to enable
USB device controller support.

Fixes #18717

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
2019-08-29 15:17:01 +02:00
Carles Cufi
afcbc9992c doc: Use west everywhere to build and flash
Instead of having a mix of west and CMake/ninja instructions for
building and flashing, document it using only west. This will help
clarify that west is the default build tool in Zephyr and should also
reduce confusion over what tool to use.
Note that the biggest change is changing the default in
doc/extensions/zephyr/application.py for :tool:, from all to west.

Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
2019-08-27 19:36:24 +02:00
Alberto Escolar Piedras
469accfbe2 native_posix: Check pointer before de-referencing it
To avoid a Coverity warning (203449):
https://github.com/zephyrproject-rtos/zephyr/issues/18354

Initialize a pointer to NULL, and check it later before
de-referencing it.
Coverity could not see that posix_print_error_and_exit()
never returns even that it ends with exit()

Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
2019-08-18 18:05:54 +02:00
Alexander Wachter
8ae2ec9748 baords: shields: Add reel_board CANbus shield
This commit adds the reel_board canbus shield.
On the shield, there is an MCP2515 and a CAN transceiver.

Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
2019-08-18 09:56:42 +02:00
Alexander Wachter
561e6ab7a7 boards: frdm_k64f: Enable pullup for CAN0_RX pin
This commit enables the pullup on CAN0_RX pin (PORTB 19).
The pullup ensures that the CAN controller initializes even
without a transceiver connected.

Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
2019-08-16 10:37:38 -05:00
Wentong Wu
71d5d7b280 Kconfig: enable BUILD_OUTPUT_HEX for sam_e70_xplained
now we use hex file instead of elf file for flash command as
PR #17822 suggested, so enable BUILD_OUTPUT_HEX by default for
board sam_e70_xplained.

Fixes: #18181.

Signed-off-by: Wentong Wu <wentong.wu@intel.com>
2019-08-16 07:09:27 -04:00
Watson Zeng
7064033473 board: nsim: doc update for debugging section
doc update for debugging dection for #17547 issue.

Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
2019-08-14 16:04:46 -07:00
Erwan Gouriou
d847117dc2 boards: stm32h747i_disco: Use default tick rate
Remove SYS_CLOCK_TICKS_PER_SEC configuration to use default value.

Fixes #18228

Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2019-08-13 20:23:43 +02:00
Peter Bigot
189aac1745 boards/efr32mg_sltb004a: use crystal instead of RC oscillator
Selection of the HFRCO causes the SOC to stay at its power-up frequency
of 19 MHz.  Switch to the HFXO to use the configured frequency.

Closes #17630

Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
2019-08-13 07:04:12 -05:00
Alberto Escolar Piedras
66f8075bc6 native_posix: Move include out of extern "C" block
Related to #17997, move an include out of a extern "C" block

Background:
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.

Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.

See: https://en.cppreference.com/w/cpp/language/language_linkage

Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
2019-08-12 15:10:15 +02:00
Alberto Escolar Piedras
18ea3bfa80 nrf52_bsim: Add missing header guard and extern C block
Add a missing header guard and an extern "C" block
in one of the nrf52_bsim headers

Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
2019-08-12 15:10:15 +02:00
Wayne Ren
13cf5c227f boards: nsim: disable CONFIG_SMP by default for nsim_hs_smp
* CONFIG_SMP can be enabled by smp application, e.g. tests/kernel/smp
* if application is not designed for smp, CONFIG_SMP can be disabled,
and the target works as a single processor.

Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
2019-08-11 21:18:38 +02:00
Alexey Brodkin
408433d5c7 board/nsim: Add support of multi-core ARC HS platform in nSIM
Now when SMP support for ARC is available we may introduce a simulation
platform which might be used for testing & development for SMP setups.

One important note is stand-alone nSIM (as well as its "Free" flavour)
doesn't support SMP simulation so we have to switch to use of nSIM via
proprietary MetaWare debugger [1] and so:
 1. We introduce new emulation target "mdb"
 2. It's only possible to run that platform for those who
    have MetaWare tools installed and valid license.

Though QEMU port for ARC is in work at the moment and once we
open that port and it has SMP support we'll switch to it and everybody
will be able to try ARC HS with SMP.

[1] https://www.synopsys.com/dw/ipdir.php?ds=sw_metaware

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2019-08-11 21:18:38 +02:00
Wayne Ren
dbc29fe77e boards: hsdk: add initial support of ARC HS Development Kit
This commit includes the initial support of ARC HS Development Kit:
* hsdk soc support
* hsdk board support
* no mmu support, so no userspace
* smp support

Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
2019-08-10 20:11:29 +02:00
Wayne Ren
1e2d42273e boards: nsim: add initial support of normal/non-secure application
normal/non-secure application: nsim_sem_normal

Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
2019-08-10 17:45:22 +02:00
Wayne Ren
5bb1f4f230 boards: emsk: add initial support of normal/non-secure application
* Non-secure/normal application: em_starterkit_em7d_normal
* secure application: em_starterkit_em7d

Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
2019-08-10 17:45:22 +02:00
Michael Scott
ee92cf4d68 drivers: modem: ublox-sara-r4: Support SARA-U2 modems, sense VINT
This adds support for SARA-U2 modems. They have different timings on
the PWR_ON pin, don't support AT+CESQ and require a manual GPRS
connection setup.

The VINT pin is used as a more reliable and faster way to power on the
modem.

Based on work by Göran Weinholt <goran.weinholt@endian.se>

Signed-off-by: Michael Scott <mike@foundries.io>
2019-08-10 00:03:39 +02:00
Bradley Bolen
6dd94127ca boards: qemu_cortex_r5: Add qemu test board for the Cortex-R series
This adds a qemu test board using the Xilinx ZynqMP SoC.

Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
2019-08-09 22:50:50 +02:00
Andrzej Głąbek
92096048f7 soc: nrf9160: Remove unsupported Kconfig option GPIO_AS_PINRESET
In nRF9160 the reset pin is a dedicated one, it cannot be configured
as a regular GPIO pin, so this option should not be presented to users
building for this SoC, to not generate confusion.

Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-08-09 20:14:24 +02:00
Andrzej Głąbek
16162f25b5 drivers: entropy: nrf5: Fix dependency of the enabling Kconfig option
This driver makes use of the nRF RNG peripheral, so it can be used only
for SoCs that are equipped with one, and not all nRF SoCs are.
The option enabling the driver should then depend on `HAS_HW_NRF_RNG`,
which indicates the presence of this peripheral in a given SoC.

This patch removes also entries disabling this driver in default
configurations for nRF9160 SoC, as these were needed only because
of the invalid dependency of the ENTROPY_NRF5_RNG option.

A minor adjustment of Kconfig files of the nrf52_bsim board was
required as well, so that this board's configuration can properly
handle this corrected dependency.

Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-08-09 20:14:24 +02:00
Kumar Gala
a3318a4583 gpio: arm: cmsdk-gpio: Fixup dts binding / nodes
Add missing gpio-cells and gpio-controller properties to arm,cmsdk-gpio
binding and dts nodes.

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-08-09 11:49:16 -05:00
Ioannis Glaropoulos
d075c91634 boards: arm: mps2_an521: force secure firmware image by default
In order to increase code coverage, we force building a Secure
Firmware image by default (i.e. with option
CONFIG_TRUSTED_EXECUTION_SECURE set), when building for
mps2_an521 board. CONFIG_TRUSTED_EXECUTION_SECURE enables
compiling-in all TrustZone-related code in the tree, that is,
all ARM-specific code inside #ifdef CONFIG_ARM_SECURE_FIRMWARE.

Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
2019-08-09 16:14:16 +02:00
Nicolas Pitre
7f74825958 riscv: add a qemu_riscv64 board
This emulates a RISC-V in 64-bit mode on a SiFive FE310 dev board.
Memory is tight so a few tests had to be disabled due to the extra
memory usage compared to qemu_riscv32.

Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
2019-08-09 09:11:45 -05:00
Jan Van Winkel
6bbd4cbaa3 gui: Add support for lvgl API version 6
Added support for lvgl API version 6

Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
2019-08-09 07:35:38 -05:00
Henrik Brix Andersen
9fae4b0310 boards: arm: twr_ke18f: add PWM LEDs
Add support for driving the on-board LEDs present on the NXP TWR-KE18F
development board using FlexTimer (FTM) PWM modulation.

Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
2019-08-09 07:32:43 -05:00
Ioannis Glaropoulos
b711c1efad boards: arm: mps2_an521: adding support for qemu
This commit adds support for QEMU on board
mps2_an521 (ARM Cortex-M33).

Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
2019-08-09 00:41:05 -07:00
Ioannis Glaropoulos
7b9ad2c731 boards: arm: mps2-an521: fix number of MPU regions in DTS
The number of MPU regions appears to be 16 instead of 8,
so we fix that in the board .dts files.

Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
2019-08-09 00:41:05 -07:00
Marcin Niestroj
6778468c73 scripts: openocd: allow to overwrite elf file used to flash device
So far zephyr.elf file was hardcoded in cmake files. Remove it from
there and use cfg.elf_file from python, which can be overwritten by
specifying --elf-file command line option.

Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
2019-08-08 22:16:50 +02:00
Ulf Magnusson
6e5e1e028d dts: Replace more status = "ok" with status = "okay"
Same deal as in commit a84ded74ea ("dts: Replace status = "ok" with
status = "okay""), for newly introduced stuff.

Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-08-08 14:03:25 -05:00
Marti Bolivar
5be5b00e3c boards: nrf9160_pca10090: add default uart2 pins
Route these to the equivalent pins for RXD1 and TXD1 on the Arduino
Mega.

Note that uart0 is routed to the debug probe IC on the nRF9160
DK, and uart1 is routed to where the RXD0 and TXD0 Arduino pins are on
the DK.  This makes RXD1/TXD1 a logical place to put these UART pins,
since the header layout for the DK board matches the Arduino mega.

This is also necessary to keep some downstream code compiling which
needs to enable the UART2 but doesn't have a good place to put these
pins, since the new DTS parser is enforcing that all required
properties (like tx-pin and rx-pin in this case) are set for nodes
with status = "okay".

Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
2019-08-08 17:25:07 +02:00
Watson Zeng
80ca3e064e board: emsdp: doc update and bug fixes
- update doc for different core configuration.

- fix some bugs in dts related files.

- add dts config and defconfig for different core configuration.

- end files with a newline in boards/arc/emsdp/board.dtsi

- remove unused head in boards/arc/emsdp/doc/index.rst

- ARC_MPU_VER in different core is fixed. so remove some useless code
  for ARC_MPU_VER judgements in Kconfig.defconfig.* files for emsdp

Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
2019-08-08 11:48:39 +02:00
Watson Zeng
bcba284e8f boards: arc: emsdp: add basic emsdp board support
* add basic emsdp board support

Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
2019-08-08 11:48:39 +02:00
Manivannan Sadhasivam
f71a0f4097 boards: arm: 96b_avenger96: Enable Mailbox support
Enable Mailbox support on 96Boards Avenger96 board. This will help
communicating to CortexA7 core.

Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
2019-08-08 11:35:00 +02:00
Manivannan Sadhasivam
8d52f4ab9e boards: arm: 96b_avenger96: Add onboard LEDs
Add onboard LEDs on 96Boards Avenger96 board. There are 4 user LEDs
on this board but only 3 are enabled. This is due to the fact that
LED0 is connected to unavailable PortZ. Hence, LED0 is ignored and
remaining LEDs are enabled starting from index 0.

Once PortZ is added, this will be fixed.

Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
2019-08-08 11:35:00 +02:00
Nicolas Pitre
75bf3c5368 riscv: freedom: rename RISCV32 to RISCV
This code is common to 32- and 64-bit builds.

Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
2019-08-08 00:29:24 -04:00
Andrew Boie
ce3cc4f974 x86: ia32: do not use the first megabyte
After witnessing some strange errors with memory not being
what it should be, lifiting everything above 1MB has solved
it. The Zephyr binary was being loaded into memory containing
reserved regions, resulting in data corruption.

We still simulate XIP for testing purposes by setting up the
memory map as follows:

0x000000 - 0x0FFFFF : Non-present
0x100000 - 0x4FFFFF : "Flash" ROM region
0x500000 - 0x8FFFFF : "SRAM" RAM region

For a total of 9 megabytes of physical RAM used.

Fixes problems observed in some large tests when code coverage
is enabled (which increases the amount of RAM used even more).

Fixes: #17782

Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
2019-08-07 12:50:53 -07:00
Andrew Boie
c3b3aafaec x86: generate page tables at runtime
Removes very complex boot-time generation of page tables
with a much simpler runtime generation of them at bootup.

For those x86 boards that enable the MMU in the defconfig,
set the number of page pool pages appropriately.

The MMU_RUNTIME_* flags have been removed. They were an
artifact of the old page table generation and did not
correspond to any hardware state.

Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
2019-08-07 12:50:53 -07:00
Loic Poulain
5533da9aa2 boards: mimzzrt1064_evk: Add pwm-led0 alias
Used to build/run blink_led sample.

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
2019-08-07 07:38:40 -05:00
Loic Poulain
2e1bed513a boards: mimxrt1064: Add PWM support
PWM on GPIO_AD_B0_09 (USER_LED/Arduino J22 pin 5)

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
2019-08-07 07:38:40 -05:00
Alex Porosanu
453ee5e782 soc: riscv32: fix zero-riscy zephyr,flash node
For OpenVega board, in the case of the Zero Riscy core,
the flash partition used for the code and data is the
M0 ARM core's 256KB flash region. This is closest to
the RISC core.
The m0_flash node defines where the interrupt vector
is located for the Zero Riscy core, and one needs to
restrict the application so its interrupt vector is
placed accordingly.

Fixes: 34b0516466 ("boards: riscv32: rv32m1_vega:
                      enable MCUboot for ri5cy core")

Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com>
2019-08-07 07:27:51 -05:00
Jose Alberto Meza
882503f913 board: mec: Select cortex-M systick-based driver
Disable 32Khz until accuracy issues and timer tests failures
are resolved.

Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
2019-08-06 15:13:45 -07:00
Sebastian Bøe
34180d376f kconfig: Fix nrf91 NONSECURE dependency
It is expressed that the BOARD depends on whether NONSECURE is enabled
or not. But it is the other way around. Depending on the selected
board, it may or may not be possible to enable/disable NONSECURE.

The dependency is going in the wrong direction, this reversed edge is
observed to be able to create a cycle in the dependency graph.

Fix the dependency by removing it.

It is left as future work to enforce that enabling/disabling NONSECURE
is done in a way that is compatible with selecting
BOARD_NRF9160_PCA10090 vs BOARD_NRF9160_PCA10090NS.

Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
2019-08-06 18:00:04 +02:00
Kumar Gala
a5ae0daa35 dts: arc: Remove device_type = "memory" from {d,i}ccm nodes
The "{d,i}ccm" nodes should not have had a 'device_type' property.
Remove it from the cases that we clearly know are {d,i}ccm.

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-08-06 08:59:22 -04:00
Kumar Gala
b52b1b2222 dts: arm: Remove device_type = "memory" from SRAM nodes
The true mmio-sram nodes should not have had a 'device_type' property.
Remove it from the cases that we clearly know are SRAM.

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-08-06 08:59:22 -04:00
Erwan Gouriou
27a5cb6048 boards: nucleo_wb55rg: Add link to reference manual
This was missing from board documentation.

Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2019-08-06 05:21:33 -04:00
Yaël Boutreux
57a166aced boards: arm: stm32mp157c_dk2: Add SPI support
Add SPI support for stm32mp157c_dk2 board. If SPI is selected, SPI4
(Arduino connector compatible SPI) and SPI5 (on front 2x20 GPIO
expander) will be enable by default on stm32mp157c_dk2 board.

Signed-off-by: Yaël Boutreux <yael.boutreux@st.com>
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2019-08-05 13:52:34 -05:00
Alberto Escolar Piedras
b7ee23bcc9 nrf52_bsim: Minor fix in time coversion
(This could not be triggered in the nrf52_bsim yet,
so just so it is fixed for the future)
Properly handle converting back and forth from absolute to HW
time when either of those is set to TIME_NEVER

Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
2019-08-05 18:57:51 +02:00
Erwan Gouriou
b837252269 boards: stm32h474i_disco: Fix m4 core sys clock
System clock for m4 core was set to same clock as m7 core.
This is wrong as m4 its value is actually based on clock frequency
value after D1CPRE (sys_d1cpre_ck) divided per HPRE value, 200MHz in
current case.
This also matches the max clock speed for the m4 core (200MHz)

Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2019-08-05 13:27:21 +02:00
Erwan Gouriou
c12688ecbf boards: stm32h747i_disco: Enforce same clock configuration on both ...
cores

In order to prevent potential misconfiguration set the clock setting,
which impacts both cores, under board.defconfig file which is used
by both core.

Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2019-08-05 13:27:21 +02:00
Christian Taedcke
6f0a2b4946 board: efr32_slwstk6061a: Add storage partition
Add storage partition to the board in order to enable testing on
nvs sample.

Signed-off-by: Christian Taedcke <hacking@taedcke.com>
2019-08-05 13:22:09 +02:00
Christian Taedcke
d9c4d0acbe board: efr32mg_sltb004a: Add storage partition
Add storage partition to the board in order to enable testing on
nvs sample.

Signed-off-by: Christian Taedcke <hacking@taedcke.com>
2019-08-05 13:22:09 +02:00
Christian Taedcke
5ccdd18a72 board: efm32wg_stk3800: Add storage partition
Add storage partition to the board in order to enable testing on
nvs sample.

Signed-off-by: Christian Taedcke <hacking@taedcke.com>
2019-08-05 13:22:09 +02:00
Christian Taedcke
c9553561b4 board: efm32pg_stk3402a: Add storage partition
Add storage partition to the board in order to enable testing on
nvs sample.

Signed-off-by: Christian Taedcke <hacking@taedcke.com>
2019-08-05 13:22:09 +02:00
Christian Taedcke
f81118405c board: efm32hg_slstk3400a: Add storage partition
Add storage partition to the board in order to enable testing on
nvs sample.

Signed-off-by: Christian Taedcke <hacking@taedcke.com>
2019-08-05 13:22:09 +02:00
Erwan Gouriou
77db273f6f stm32: clock_control: Enforce HCLK prescaler value
STM32 clock control subsystem allows to configure a different
frequency value for core clock (SYSCLK) and AHB clock (HCLK).
Though, it is HCLK which is used to feed Cortex Systick timer
which  is used in zephyr as reference system clock.
If HCLK frequency is configured to a different value from SYSCLK
frequency, whole system is exposed to desynchro between zephyr clock
subsytem and STM32 HW configuration.
To prevent this, and until zephyr clock subsystem is changed to be
aware of this potential configuration, enforce AHB prescaler value
to 1 (which is current default value in use for all STM32 based
boards).

On STM32H7, enforce D1CPRE which fills the same role as ABH precaler.

On STM32MP1, the equivalent setting is done on A7 core, so it is
not exposed to the same issue as long as SYS_CLOCK_HW_CYCLES_PER_SEC
is set with the 'mlhclk_ck' clock frequency value. Update
matching boards documentation.

Fixes #17188

Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2019-08-03 14:18:55 -04:00
Nicolas Pitre
1f4b5ddd0f riscv32: rename to riscv
With the upcoming riscv64 support, it is best to use "riscv" as the
subdirectory name and common symbols as riscv32 and riscv64 support
code is almost identical. Then later decide whether 32-bit or 64-bit
compilation is wanted.

Redirects for the web documentation are also included.

Then zephyrbot complained about this:

"
New files added that are not covered in CODEOWNERS:

dts/riscv/microsemi-miv.dtsi
dts/riscv/riscv32-fe310.dtsi

Please add one or more entries in the CODEOWNERS file to cover
those files
"

So I assigned them to those who created them. Feel free to readjust
as necessary.

Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
2019-08-02 13:54:48 -07:00
Nicolas Pitre
1593e52d6d m2gl025_miv: workaround for issue #17851
This is the workaround suggested by Andy Ross to fix #17851.

Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
2019-08-02 12:47:41 +02:00
Andrew Boie
bd709c7322 x86: support very early printk() if desired
Adapted from similar code in the x86_64 port.
Useful when debugging boot problems on actual x86
hardware if a JTAG isn't handy or feasible.

Turn this on for qemu_x86.

Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
2019-08-02 00:29:21 -07:00
Francisco Munoz
98a3399138 boards: mec15xxevb_assy6853: Update debug control flag
Write all the desired values in the debug control flag.
Initally we were oring it, but this variable does not have
the expected initial values as it also depends on fuse
programming settings, therefore we dont have console.

Signed-off-by: Francisco Munoz <francisco.munoz.ruiz@intel.com>
2019-08-01 16:20:49 -07:00
Francisco Munoz
1f8f390cde boards: mec15xxevb_assy6853: Documentation improvements
Better documentation describing the flashing and booting process.

Fixes: #17483.

Signed-off-by: Francisco Munoz <francisco.munoz.ruiz@intel.com>
2019-08-01 16:20:49 -07:00
Jose Alberto Meza
dcb12d6611 boards: mchp: Fix MEC1501 dts warnings in eSPI
Remove incorrect override in board dts for eSPI

Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
2019-08-01 13:14:16 -07:00
Yaël Boutreux
13ceab4c3b drivers: spi: spi_ll_stm32: Add config to manage slave select
Allow the user to use software slave select instead of the
hardware pin, in order to free the related GPIO and avoid
unwanted SS triggering on the hardware pin. The default SS
is still the hardware pin.

Signed-off-by: Yaël Boutreux <yael.boutreux@st.com>
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2019-08-01 11:58:02 -04:00
Alexey Brodkin
61f073a735 board/nsim: Add support of ARC HS cores in nSIM
ARC nSIM simulates pretty much any modern ARC core,
moreover it emulates a lot of different core features so
it is possible to play with them even wo real hardware.

Thus we add yet another ARC core family to be used on simulated
nSIM board.

For now it's just a basic configuration with ARC UART for
smoke-testing of Zephyr on ARC HS CPUs.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2019-07-31 09:25:15 -07:00
Wayne Ren
f2fd40e90d ARC: Add support for ARC HS family of CPU cores
The ARC HS is a family of high performance CPUs from Synopsys
capable of running wide range of applications from heavy DPS
calculation to full-scale OS.

Still as with other ARC cores ARC HS might be tailored to
a particular application.

As opposed to EM cores ARC HS cores always have support of unaligned
data access and by default GCC generates such a data layout with
so we have to always enable unaligned data access in runtime otherwise
on attempt to access such data we'd see "Unaligned memory exception".

Note we had to explicitly mention CONFIG_CPU_ARCEM=y in
all current defconfigs as CPU_ARC{EM|HS} are now parts of a
choice so we cannot simply select ether option in board's Kconfig.

And while at it change "-mmpy-option" of ARC EM to "wlh1"
which is the same as previously used "6" but matches
Programmer's Reference Manual (PRM) and is more human-friendly.

Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2019-07-31 09:25:15 -07:00
Alexey Brodkin
7da47e6313 boards/nsim: Enable unaligned data acess for nSIM with simple ARC EM
This will give us a possibility to check unaligned read/write support
in simulation.

Note nSIM with S(ecure)EM (with secure option) doesn't support that
mode in HW.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2019-07-31 09:25:15 -07:00
Armando Visconti
e9055ae74d board/shields: x-nucleo-iks01a3: add STTS751 configuration in overlay
Add STTS751 I2C information into the x-nucleo-iks01a3 shield
overlay file.

Signed-off-by: Armando Visconti <armando.visconti@st.com>
2019-07-31 10:32:10 -04:00
Karl Zhang
26b1e07a99 arm: Musca B1: Migrate to eFlash
Musca B1 has 2 x 2MB embedded flash memories (eFlash). The flash
memories are connected to the AHB Master Expansion “Code Interface”.

Signed-off-by: Karl Zhang <karl.zhang@linaro.org>
2019-07-31 10:31:29 -04:00
Ulf Magnusson
4eb85176e3 boards: 96b_nitrogen: Remove 'csn-pin' property from SPI master
This property is only declared in bindings/spi/nordic,nrf-spis.yaml ('s'
for 'slave'), not in bindings/spi/nordic,nrf-spi.yaml.

Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-07-31 14:35:11 +03:00
Christophe Priouzeau
5c96de6194 boards: stm32mp157c_dk2: add ic2 support for arduino connector
Add the link between the i2c and the arduino connector,
here i2c5.

Signed-off-by: Christophe Priouzeau <christophe.priouzeau@linaro.org>
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@linaro.org>
2019-07-31 05:59:16 -04:00
Christophe Priouzeau
27d12f7d55 boards: stm32mp157c_dk2i: add support of i2c5
I2C5 are used by arduino connector.

Signed-off-by: Christophe Priouzeau <christophe.priouzeau@linaro.org>
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@linaro.org>
2019-07-31 05:59:16 -04:00
Rick Conrey
710ab470c8 boards: nucleo_wb55rg: Enable ADC
Enable ADC on nucleo_wb55rg

Signed-off-by: Rick Conrey <rick.conrey@witiproducts.com>
2019-07-31 05:38:25 -04:00
Ulf Magnusson
25bca3cec4 dts: posix: Fix 'current-speed' property typo
s/current_speed/current-speed/, just to match the binding. The value is
never used.

Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-07-31 09:46:46 +03:00
Kumar Gala
4e7863dc41 dts: Make instance defines consistent
We generated a define for each instance to convey its existance of the
form:
	#define DT_<COMPAT>_<INSTANCE> 1

However we renamed all other instance defines to be of the form
DT_INST_<INSTANCE>_<FOO>.  To make things consistent we now generate a
define of the form:

	#define DT_INST_<INSTANCE>_<COMPAT> 1

We also now deprecate the DT_<COMPAT>_<INSTANCE> form and fixup all uses
to use the new form.

Fixes: #17650

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-07-30 17:10:31 -05:00
Anas Nashif
da6b49b432 doc: minnowboard: add grub docs
Was previously documented as part of the galileo board. Moving here now.

Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2019-07-29 21:30:25 -07:00
Anas Nashif
578ae40761 boards: remove quarl_se_c1000
This board and SoC was discontinued some time ago and is currently not
maintained in the zephyr tree.
Remove all associated configurations and variants from the tree.

Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2019-07-29 21:30:25 -07:00
Anas Nashif
ffaba63b10 boards: remove arduino 101 and related boards
This board and SoC was discontinued some time ago and is currently not
maintained in the zephyr tree.
Remove all associated configurations and variants from the tree.

Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2019-07-29 21:30:25 -07:00
Anas Nashif
a597c86c30 boards: remove galileo board
This board and SoC was discontinued some time ago and is currently not
maintained in the zephyr tree.
Remove all associated configurations and variants from the tree.

Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2019-07-29 21:30:25 -07:00
Pavlo Hamov
e806bd9779 boards: stm32f429_disc1: add i2c
Add I2C_1, I2C_2, I2C_3 devices.
I2C_3: Enabled by default (STMPE811 touch)

Signed-off-by: Pavlo Hamov <pavlo_hamov@jabil.com>
2019-07-29 16:47:34 -05:00
Jukka Rissanen
5cf60a326a boards: Set support for serial port networking as netif:serial-net
As we now have PPP support, use more generic "serial-net" string instead
of "slip" when setting what kind of networking the board supports.

Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
2019-07-29 10:24:46 +03:00
Rick Conrey
bcd60189c2 boards: nucleo_wb55rg: enable PWM2 on nucleo_wb55rg
enable PWM2 Ch 1 on nucleo_wb55rg

Signed-off-by: Rick Conrey <rick.conrey@witiproducts.com>
2019-07-26 11:27:15 -04:00
Pavlo Hamov
c78acb75e4 boards: stm32_min_dev enable I2C_2
Add support of i2c peripheral for mini_dev boards

Signed-off-by: Pavlo Hamov <pavlo_hamov@jabil.com>
2019-07-26 11:26:29 -04:00
Arnaud Pouliquen
386fcf3b53 ipm: Add support for stm31mp157c_dk2 board
Add the mailbox support for the stm32mp15c_dk2,
relied on IPCC peripheral.

Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
2019-07-26 14:38:43 +02:00
Jose Alberto Meza
491702a6c6 boards : arm : Add ESPI support for MEC15xx EVB
Expose eSPI block with interrupts enabled for channel 0 & 1
eSPI handshake has been tested using espi driver sample app

Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
2019-07-25 08:23:38 -07:00
Yannis Damigos
a4d9c3b4ff olimexino_stm32: Enable I2C1
Enable I2C1 on olimexino_stm32

Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
2019-07-25 10:52:59 -04:00
Erwan Gouriou
749c22401b boards: stm32h747i_disco: Fix picture size
Set board picture to a reasonable size.

Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2019-07-25 10:51:49 -04:00
Rick Conrey
9bf2e3fdcb boards: nucleo_wb55rg: enable SPI1 on nucleo_wb55rg
enable SPI1 on nucleo_wb55rg

Signed-off-by: Rick Conrey <rick.conrey@witiproducts.com>
2019-07-25 10:49:58 -04:00
Scott Worley
bdaab8cfa0 drivers : timer : Add MEC1501 32KHz kernel timer driver
Add a kernel timer driver for the MEC1501 32KHz RTOS timer.
This timer is a count down 32-bit counter clocked at a fixed
32768 Hz. It features one-shot, auto-reload, and halt count down
while the Cortex-M is halted by JTAG/SWD. This driver is based
on the new Intel local APIC driver. The driver was tuned for
accuracy at small sleep values. Added a work-around for RTOS
timer restart issue. RTOS timer driver requires board ticks per
second to be 32768 if tickless operation is configured.

Signed-off-by: Scott Worley <scott.worley@microchip.com>
2019-07-24 14:58:41 -07:00
Alberto Escolar Piedras
0b0e7eeb15 native_posix: Fix undefined macro warning
Fix undefined macro warning if
CONFIG_NATIVE_POSIX_SLOWDOWN_TO_REAL_TIME is not selected

Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
2019-07-24 16:34:31 -04:00
Kumar Gala
0bed1e9ab7 boards: cc3220sf_launchxl: Use SDK OpenOCD
The zephyr SDK 0.10.1 works well for the CC3220 so lets use it.

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-07-24 14:24:24 -04:00
Peter A. Bigot
fa10a9640b dts/spi-nor: use bytestring for JEDEC ID
This was always intended to be a bytestring rather than an array, but
full support was missing.  Since that has been addressed switch it to
the preferred format.

Signed-off-by: Peter A. Bigot <pab@pabigot.com>
2019-07-24 09:20:56 -04:00
Peter A. Bigot
64eca420ce boards/arm/nrf52840_pca10056: add alias for external flash
Provide an alias so we can assign partitions to this device through
application-specific overlays.

Signed-off-by: Peter A. Bigot <pab@pabigot.com>
2019-07-24 09:20:56 -04:00
Peter A. Bigot
ea86f9a117 boards/particle_*: correct spi flash description
Particle released documentation with a pre-release flash chip.  Correct
the name to the actual as-sold device, and add the corresponding size
property as well as the has-be32k property.  Also add an alias so we
can set partitions externally.

Signed-off-by: Peter A. Bigot <pab@pabigot.com>
2019-07-24 09:20:56 -04:00
Peter A. Bigot
50550e02c0 drivers/spi_nor: remove write-block-size devicetree property
Devices using this driver do not require any special alignment for
writes.

Signed-off-by: Peter A. Bigot <pab@pabigot.com>
2019-07-24 09:20:56 -04:00
Peter A. Bigot
2a590d3fa5 drivers/spi_nor: remove configurability of page/sector/block sizes
The JEDEC API defines the hardware page, sector, and block sizes.
Deprecate the Kconfig settings, remove the `erase-size-block` property,
and add `has-be32k` to indicate that 32K-byte erase is supported.
Rework the driver to use the constants instead of configured values.

Signed-off-by: Peter A. Bigot <pab@pabigot.com>
2019-07-24 09:20:56 -04:00
Johann Fischer
25d7a09aa5 boards: nrf52840_pca10056: add arduino spi, uart and i2c nodes
Add arduino spi, uart and i2c nodes.

Signed-off-by: Johann Fischer <j.fischer@phytec.de>
2019-07-23 13:36:52 +02:00
Vincent Wan
15107b0340 doc: boards: cc3220sf_launchxl: update OpenOCD instructions
Change instructions to use Zephyr SDK's OpenOCD.

Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
2019-07-23 10:58:37 +02:00
Yannis Damigos
80de227a3a disco_l475_iot1: Enable I2C3
Enable I2C3 on disco_l475_iot1.

Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
2019-07-23 10:52:28 +02:00
Kumar Gala
3df9636d05 native_posix: Remove reg property from uart node in dts
The uart node in the native_posix dts has a reg property, but there are
no registers associated with the uart.  So remove the property and
remove the unit address associated with the reg (now that its removed).

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-07-23 04:07:54 -04:00
Alberto Escolar Piedras
e6131a63ed nrf52_bsim: doc: Clarify how to fetch and compile BabbleSim
Clarify a little bit how to fetch and compile Babblesim.
So users will not need to have repo installed,
and to guide them to add the variables to their shell init
script

Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
2019-07-22 19:49:08 +02:00
Carles Cufi
0928b1dde6 boards: nrf52840_pca10059: Enable ADC in DT
Enable the ADC in the basic DT configuration.

Fixes #17671

Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
2019-07-22 16:20:11 +02:00
Mariusz Glebocki
c189993028 boards: litex_vexriscv: Enable LiteEth driver
Enable liteeth device in litex_vexriscv board.

Signed-off-by: Mariusz Glebocki <mglebocki@antmicro.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
2019-07-22 15:28:54 +03:00
Peter A. Bigot
1bb59bb68e dts: add label property to all jedec,spi-nor nodes
The property is required on all SPI clients, but was missing from
several devicetree nodes.  Set it, using the capitalized version of the
node alias when present, with "jedec,spi-nor#0" as the fallback.

Closes #17662

Signed-off-by: Peter A. Bigot <pab@pabigot.com>
2019-07-20 17:23:08 -04:00
Kumar Gala
2d9032e5d0 boards/arm/v2m_musca_b1: Add missing label to timer node
The binding for arm,cmsdk-timer requires a label so add it into the dts
since its missing on v2m_musca_b1.

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-07-20 08:27:23 -04:00
Ulf Magnusson
b3a042a040 boards/arm/mps2_an521: Add missing timer labels to dts
The bindings for arm,cmsdk-{d}timer requires a label so add it into the
dts since its missing on mps2_an521.

Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-07-20 08:26:44 -04:00
Ulf Magnusson
ad3ee99756 dts: Add missing spi-max-frequency for mimxrt/nxp/hifive1/qemu_riscv2
spi-max-frequency is marked as required in
dts/bindings/mtd/jedec,spi-nor.yaml.

I took the value from the datasheets (133 MHz for all), and guessed that
a dummy entry is fine for QEMU.

Fixes some errors in
https://github.com/zephyrproject-rtos/zephyr/issues/17532.

Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-07-19 10:46:01 -04:00
Alexander Wachter
63157529b3 boards: arm: Activate DTCM for STM32F7 boards with Ethernet
Activate the DTCM for STM32F7 board that have Ethernet.
This is needed because the Ethernet driver puts the DMA buffer
to this section.

Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
2019-07-19 10:05:46 +02:00
Krzysztof Chruscinski
519c77d1e2 logging: Add qemu_x86_64 backend
Added backend for qemu_x86_64

Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
2019-07-18 18:16:39 -04:00
Andrzej Puzdrowski
5a3f106be3 boards/qemu_x86: fix emulated program memory size
Qemu_x86 didn't reflect emulated program memory size.
It was because chosen zephyr,flash was assigned to flash_simulator
which was helping to generate DT_FLASH properties for sim_flash node.

This change revert choice of flash0 which solve problem with
program memory size. Flash simulator have to use
DT_SOC_NV_FLASH_xxx labels for fetch its property since that.

fixes #15832

Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
2019-07-17 13:49:26 -07:00
Andrzej Puzdrowski
cdc7b6d656 boards/qemu_x86: fix qemu memory map
The desired memory map is to have the 0 - 4K page non-present
to catch NULL pointer dereferences,
from 4K - 4MB for the program text (RO, Execute),
ROM (RO, No Execute), and 4MB-8MB for system RAM.

This patch cut text size by 4 KB which allow to meet above
requirements.

Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
2019-07-17 13:49:26 -07:00
Piotr Zięcik
e4bd11b3f3 dts: Add information about system bus frequency to the dts
This commit adds a fixed clock node (representing clock driving
system bus). The added node is then referenced by peripherals requiring
information about driving clock frequency.

Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
2019-07-17 21:53:36 +02:00
Piotr Zięcik
7d56fc35fd dts: Add information about CPU frequency to the cpu nodes
This commit adds 'clock-frequency' property to the cpu nodes.
The clock frequency specified in the added property is used
during platform configuration. Examples:

- The SWO logger uses clock frequency to configure SWO output.
- Plenty of platforms need CPU clock specified for their HAL.
- Most of devices with USB needs information about CPU clock
  in order to configure USB clock source.

Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
2019-07-17 21:53:36 +02:00
Ioannis Glaropoulos
f8c37d56fd boards: arm: mps2_an521: some trivial Kconfig fixes
When TRUSTED_EXECUTION_NONSECUCRE is selected, we always
define the default board (mps2_an521). We do not need to
OR with TRUSTED_EXECUTION_SECURE, in this Kconfig
conditional.

In addition to that, we make the BOARD_MPS2_AN521 board
to strictly depend on the corresponding SOC, not on the
SOC series.

Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
2019-07-17 09:14:44 -07:00
Ioannis Glaropoulos
089127c3c0 boards: arm: mps2_an521: add QEMU target and coverage
Signify that the MPS2 AN521 is selected as a QEMU
target. Indicate, also, that this board has support
for COVERAGE.

Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
2019-07-17 09:14:44 -07:00
Ioannis Glaropoulos
4335cc287e boards: arm: mps2_an385: clean up redundant Kconfig setting
CONFIG_ARCH_HAS_USERSPACE is automatically set for
Cortex-M targets with CONFIG_ARM_MPU being set. So
we can remove this from the default setup since it
is redundant.

Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
2019-07-17 09:14:44 -07:00
Nicolas Pitre
8c5c5a9452 native_posix: introduce a native_posix_64 board configuration
Because the only difference between native_posix and native_posix_64
should be 32-bit vs 64-bit compilation, the NATIVE_POSIX menu option
is turned into NATIVE_POSIX_32 and the NATIVE_POSIX_64 is added, with
both selecting NATIVE_POSIX. This way nothing changes for the existing
native_posix target, allowing it to share almost everything with the
64-bit version.

Both flavors are made available for CI tests to pick them. This assumes
both 32-bit and 64-bit build environments are available.

Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
2019-07-16 10:41:11 -07:00
Nicolas Pitre
74db5ce203 native_posix: fix hw_irq_ctrl_get_irq_status() conflicting type
My compiler is rather fussy:

zephyr/boards/posix/native_posix/irq_ctrl.c:133:7:
error: conflicting types for ‘hw_irq_ctrl_get_irq_status’
 u64_t hw_irq_ctrl_get_irq_status(void)
       ^~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from zephyr/boards/posix/native_posix/irq_ctrl.c:11:
zephyr/boards/posix/native_posix/irq_ctrl.h:29:10:
note: previous declaration of ‘hw_irq_ctrl_get_irq_status’ was here
 uint64_t hw_irq_ctrl_get_irq_status(void);
          ^~~~~~~~~~~~~~~~~~~~~~~~~~

Make the definition match its declaration.

Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
2019-07-16 10:41:11 -07:00
Kumar Gala
108a4b385e dts: nxp: mimxrt: Add missing jedec-id property to flash nodes
The spi-nor flash nodes require a jedec-id property as per the binding.
We add the jedec-id's as best we can determine based on the data sheets
for the various flash modules on these boards.

However these id's should be validated by actually reading the value to
ensure they are correct.

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-07-16 18:15:59 +09:00
Jan Van Winkel
90badd53b3 dts: posix: Added dummy serial current-speed entry
Added dummy current-speed entry for uart0

Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
2019-07-16 18:14:06 +09:00
Anas Nashif
5f24b419bb tests: pwm_api: remove whitelisting
Remove whitelisting and enable broader testing on all boards with needed
features.
Add pwm to board yaml where it applies.

Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2019-07-12 05:54:16 -07:00
Anas Nashif
1cba042107 boards: colibri_imx7d_m4: this board supports PWM
Add pwm as supported feature to the board yaml file.

Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2019-07-12 05:54:16 -07:00
Anas Nashif
99d652964d boards: mark boards as supporting usb_cdc in DT
Remove whitelisting and enable broader testing on all boards with needed
features.

Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2019-07-12 05:54:16 -07:00
Anas Nashif
bdc1975238 arduino_due: do not build gpio_sam driver
This board uses the sam3 gpio driver. gpio_sam was selected by default
causing a conflict and issues when building for this board.

Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2019-07-12 05:54:16 -07:00
Anas Nashif
ee01d0ac6d boards: add supported devices to boards
add supported features (i2c) to boards definitions.

Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2019-07-12 05:54:16 -07:00
Anas Nashif
912c88e90d boards: arduino_due: this board does support gpio
Add gpio as being supported by this board.

Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2019-07-12 05:54:16 -07:00
Anas Nashif
986df68b33 boards: hifive1: add supported peripherals
Add supported features to the board definition.

Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2019-07-12 05:54:16 -07:00
Anas Nashif
7311e79810 boards: hifive1: add aliases for pwm
Add missing aliases and make this board available for some PWM samples.

Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2019-07-12 05:54:16 -07:00
Robert Lubos
748413cb92 boards: holyiot_yj16019: Fix radio capabilities
holyiot_yj16019 board uses nRF52832 SoC, which does not have 802.15.4
radio. Therefore, 802.15.4 should not be listed in it's capabilities.

Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
2019-07-12 12:58:09 +02:00
Rick Conrey
094d5c2722 boards: nucleo_wb55rg: Enable RTC
Enable RTC on nucleo_wb55rg

Signed-off-by: Rick Conrey <rick.conrey@witiproducts.com>
2019-07-11 13:10:15 -05:00
Peter A. Bigot
6bdb1b8b60 boards: arm: particle_*: uncomment cs-gpios in spi assignments
At the time these overlays were created the author was unclear on how to
correctly represent SPI chip selects on a target where the peripheral
does not control that signal.  As such the pin assignment was present
only as documentation.

Enlightenment was subsequently achieved and the cs-gpios property should
be properly defined.

Note that the mesh feather does not define a chip select to be used with
the spi1 peripheral.

Signed-off-by: Peter A. Bigot <pab@pabigot.com>
2019-07-11 07:06:35 -04:00
Peter A. Bigot
271c63b70d boards: particle_*: move DTS includes to dts subdirectory
This conforms to the standard layout implied by adding BOARD_DIR to
DTS_ROOTS.

Signed-off-by: Peter A. Bigot <pab@pabigot.com>
2019-07-11 07:06:35 -04:00
Emanuele Di Santo
173202f392 boards: arm: nrf52840_pca10090: swap error for assert in board.c
Use an assert to catch the situation where we can't find a port
to use for the reset line pin, since it shouldn't really happen.

The case where reset_pin_configure() is executed but no reset
line is selected can't happen due to static asserts in `integrity.c`
that enforce a reset line to be selected when the reset pin
functionality is enabled.

Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
2019-07-11 11:27:47 +02:00
Emanuele Di Santo
c231988d9c boards: arm: nrf52840_pca10090: fix warning in board.c
Initialize a variable to avoid a compiler warning
when the reset pin is not selected.

Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
2019-07-11 11:27:47 +02:00
Michael Scott
c69081d775 boards: arm: nrf52840_pca10056/nrf52_pca10040: enable pyocd runner
Mbed OS provides a DAPlink firmware update for nRF52840-DK here:
https://os.mbed.com/platforms/Nordic-nRF52840-DK/
and for nRF52-DK here:
https://os.mbed.com/platforms/Nordic-nRF52-DK/

When using this firmware we need to flash the board with the pyocd
runner.  Let's enable the pyocd runner for this purpose.

Signed-off-by: Michael Scott <mike@foundries.io>
2019-07-10 12:11:46 -05:00
Jun Yang
6ff5ac05e4 usdhc/pinmux: configure pinmux of usdhc on mimxrt1050 evk
Implementation of pinmux of usdhc depends on board design.

Usdhc driver could change pinmux according to SD mode, SoC

should provide API for this. Board pinmux should register

its pinmux function to SoC.

Signed-off-by: Jun Yang <jun.yang@nxp.com>
2019-07-10 11:58:15 -05:00
Jun Yang
46106ece25 dts/sdhc: support mmc dts and usdhc dts
1) dts/bindings/mmc/mmc.yaml: specifies common mmc.

2) dts/bindings/mmc/nxp,imx-usdhc.yaml: specifies
   nxp usdhc module which inherits mmc.

3) dts/arm/nxp/nxp_rt.dtsi: usdhc support on RT chip.

4) boards/arm/mimxrt1050_evk/mimxrt1050_evk.dts:
   usdhc slot support on mimxrt1050_evk board.

Signed-off-by: Jun Yang <jun.yang@nxp.com>
2019-07-10 11:58:15 -05:00
Maureen Helm
aa8e13c3ff boards: lpcxpresso55s69: Enable pyocd runner
Enables the pyocd runner on the lpcxpresso55s69 board. Note that this
currently requires building pycod from source to pick up fixes in
https://github.com/mbedmicro/pyOCD/pull/690

Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2019-07-10 03:44:19 -05:00
Maureen Helm
4d5ee282be samples: net: Convert mcr20a samples to use the frdm_cr20a shield
Converts all net samples that enable the mcr20a 802.15.4 driver to use
the frdm_cr20a shield instead of hardcoding configs for the frdm_k64f
base board. This makes it possible to build mcr20a samples for other
base boards with compatible arduino headers.

Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2019-07-09 18:15:45 -07:00
Maureen Helm
3b1dc14552 boards: shields: Introduce frdm_cr20a shield
Introduces an arduino-compatible shield for the mcr20a radio
transceiver.

Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2019-07-09 18:15:45 -07:00
Henrik Brix Andersen
f39f234d07 boards: match specified jlink swd speed when using pyocd runner
Match the speed speficied for all boards using the jlink runner when
using the pyocd runner on the same board.

Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
2019-07-09 08:52:44 -05:00
Alberto Escolar Piedras
e4a4797488 nrf52_bsim: Add nrfx path to include path
To allow NRF drivers to include nrfx HAL or drivers headers
like with the real HAL, include the top nrfx/ folder
just as the real nrfx does.

Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
2019-07-08 17:40:21 +02:00
Armando Visconti
196997439b boards: add support for shields x-nucleo-iks01a3
x-nucleo-iks01a3 shield is an arduino compatible companion board
which can be used on top of Nucleo standard boards. It extend
the Nucleo functionalities adding following MEMS sensor support:

    - LSM6DSO accel and gyro
    - LIS2MDL magnetometer
    - LIS2DW12 accel
    - LPS22HH pressure
    - HTS221 humidity

Signed-off-by: Armando Visconti <armando.visconti@st.com>
2019-07-08 10:07:23 -05:00
Armando Visconti
14ac665ba0 boards/arm: Add arduino_header support to nucleo f401re and f411re
Add arduino_header support to nucleo f401re and f411re boards.

Signed-off-by: Armando Visconti <armando.visconti@st.com>
2019-07-08 10:07:23 -05:00
Francois Ramu
9f6a28742d boards: arm: Add nucleo for nucleo_g071rb board
This patch adds support for the STM32 nucleo_g071rb board
 from STMicroelectronics.

Signed-off-by: Philippe Retornaz <philippe@shapescale.com>
Signed-off-by: Francois Ramu <francois.ramu@st.com>
2019-07-05 10:35:55 -05:00
Yaël Boutreux
737d805192 boards: arm: disco_l475_iot1: remove MCU slow down when using BlueRNG-MS
Remove unnecessary MCU slow down to 16Mhz when using BLE chip BlueNRG-MS

Signed-off-by: Yaël Boutreux <yael.boutreux@st.com>
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2019-07-04 09:22:18 -04:00
Erwan Gouriou
79e4d0af62 boards: stm32h747i_disco: Provide doc
Provide doc for stm32h747i_disco.
Includes basic description for building and flashing
individual cores.

Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2019-07-04 08:50:04 -04:00
Erwan Gouriou
0fbf0c397a boards: stm32h747i_disco: Add m4 target
Add m4 target to stm32h747i_disco.

Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2019-07-04 08:50:04 -04:00
Erwan Gouriou
afcb1ae71f boards: Add stm32h747i_disco, C-M7 target
Add C-M7 target for board stm32h747i_disco.

Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2019-07-04 08:50:04 -04:00
Johann Fischer
fc57ea8d3c drivers: ssd1673: rename driver to ssd16xx
ssd1673 driver supports different controllers,
rename it to more generic ssd16xx.

Signed-off-by: Johann Fischer <j.fischer@phytec.de>
2019-07-04 07:27:09 -04:00
Andy Ross
b142033b91 boards/arc: Remove tick rate settings for ARC hardware
The ARC timer is a MHz-scale cycle counter and works very well with
the new 10 kHz default tick rate.  Remove the settings for ARC
hardware.

Note that the nsim board definitions are left at 100 Hz.  That is a
software emulation environment that (like qemu) exposes the host clock
as "real" time and thus is subject to clock jitter due to host
scheduling.

Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
2019-07-02 22:52:29 -04:00
Andy Ross
7044ce746f boards/arm: Remove 1000 Hz tick rate on STM32 boards
These all have what appears to be a promiscuously cut-and-pasted
declaration for a 1000 Hz tick rate.  They are all SysTick boards and
will work very well with the new 10 kHz default, so use that instead.

Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
2019-07-02 22:52:29 -04:00
Kumar Gala
154e09134f boards: dts: cleanup partition node names
Fix several board dts in which the partition node name and the reg
didn't match.

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-07-02 20:26:56 -04:00
Henrik Brix Andersen
86bfa07c5c boards: twr_ke18f: document watchdog support
Add watchdog support to the documentation for the NXP TWR-KE18F
development board.

Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
2019-07-02 18:00:16 -05:00
Kumar Gala
502094b096 arm: mps_an521: Add support for the AN521 on MPS2+
The AN521 is a Soft Macro Model implementation of the SSE-200 subsystem
with SIE-200 and CMSDK components targeting the MPS2+ board. The
SSE-200 subsystem implements two Cortex-M33 cores.

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Signed-off-by: Karl Zhang <karl.zhang@linaro.org>
2019-07-02 17:44:25 -05:00
Loic Poulain
77581fcdb0 boards: mimxrt10xx: Add counter to supported list
mimxrt10xx boards now have counter support via GPT.

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
2019-07-01 11:53:07 -05:00
Stig Bjørlykke
0ca1aaa7be boards: arm: Add support for nRF51 Dongle (PCA10031)
This commit adds support for the nrf51_pca10031 board.

Signed-off-by: Stig Bjørlykke <stig.bjorlykke@nordicsemi.no>
2019-07-01 14:19:08 +02:00
Kumar Gala
284bc9d964 dts: Rename SW._GPIO_* -> DT_ALIAS_SW._GPIOS_*
We use the following commands to rename any
SW._GPIO_{CONTROLLER,PIN,FLAGS} to
DT_ALIAS_SW._GPIOS_{CONTROLLER,PIN,FLAGS}

git grep -l SW._GPIO_CONTROLLER | xargs sed -i 's/SW\(.\)_GPIO_CONTROLLER/DT_ALIAS_SW\1_GPIOS_CONTROLLER/g'
git grep -l SW._GPIO_PIN | xargs sed -i 's/SW\(.\)_GPIO_PIN/DT_ALIAS_SW\1_GPIOS_PIN/g'
git grep -l SW._GPIO_FLAGS | xargs sed -i 's/SW\(.\)_GPIO_FLAGS/DT_ALIAS_SW\1_GPIOS_FLAGS/g'

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-07-01 07:14:36 -05:00
Arnaud Pouliquen
f7697c43b9 board: remove useless config in Avenger96 board
The CONFIG_RPROC_RSC_TABLE is selected when RAM_CONSOLE
is activated, no need to declare it.

Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
2019-06-30 09:41:32 -04:00
Kumar Gala
c129ac4467 boards: dts: Cleanup some "ok" -> "okay"
Some new cases of:
	status = "ok"

that we want to be:
	status = "okay"

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-06-28 14:38:57 -05:00
Anas Nashif
a2fd7d70ec cleanup: include/: move misc/util.h to sys/util.h
move misc/util.h to sys/util.h and
create a shim for backward-compatibility.

No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.

Related to #16539

Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2019-06-27 22:55:49 -04:00
Anas Nashif
9ab2a56751 cleanup: include/: move misc/printk.h to sys/printk.h
move misc/printk.h to sys/printk.h and
create a shim for backward-compatibility.

No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.

Related to #16539

Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2019-06-27 22:55:49 -04:00
Anas Nashif
d1b2718687 cleanup: include/: move uart.h to drivers/uart.h
move uart.h to drivers/uart.h and
create a shim for backward-compatibility.

No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.

Related to #16539

Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2019-06-27 22:55:49 -04:00
Anas Nashif
5843884887 cleanup: include/: move pwm.h to drivers/pwm.h
move pwm.h to drivers/pwm.h and
create a shim for backward-compatibility.

No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.

Related to #16539

Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2019-06-27 22:55:49 -04:00
Anas Nashif
a8167ab17d cleanup: include/: move pinmux.h to drivers/pinmux.h
move pinmux.h to drivers/pinmux.h and
create a shim for backward-compatibility.

No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.

Related to #16539

Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2019-06-27 22:55:49 -04:00
Anas Nashif
8f692c7d38 cleanup: include/: move i2c.h to drivers/i2c.h
move i2c.h to drivers/i2c.h and
create a shim for backward-compatibility.

No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.

Related to #16539

Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2019-06-27 22:55:49 -04:00
Anas Nashif
6aa9c3a68f cleanup: include/: move gpio.h to drivers/gpio.h
move gpio.h to drivers/gpio.h and
create a shim for backward-compatibility.

No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.

Related to #16539

Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2019-06-27 22:55:49 -04:00
Anas Nashif
ef281c4237 cleanup: include/: move sys_io.h to sys/sys_io.h
move sys_io.h to sys/sys_io.h and
create a shim for backward-compatibility.

No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.

Related to #16539

Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2019-06-27 22:55:49 -04:00
Anas Nashif
10291a0789 cleanup: include/: move tracing.h to debug/tracing.h
move tracing.h to debug/tracing.h and
create a shim for backward-compatibility.

No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.

Related to #16539

Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2019-06-27 22:55:49 -04:00
Daniel Leung
1c5fa6a128 cmake: use sdk-ng built toolchain for x86_64
This adds the necessary bits to utilize the x86_64 toolchain
built by sdk-ng for x86_64 when toolchain variant is either
zephyr or xtools. This allows decoupling the builds from
the host toolchain.

Newlib is also available with this toolchain so remove
the Kconfig restriction on CONFIG_NEWLIB_LIBC.

Signed-off-by: Daniel Leung <daniel.leung@intel.com>
2019-06-27 16:08:32 -04:00
Daniel Leung
06a3735754 x86_64: minimally preparing for enabling newlib
The libc hooks for Newlib requires CONFIG_SRAM_SIZE and
the symbol "_end" at the end of memory. This is in preparation
for enabling Newlib for x86_64.

Signed-off-by: Daniel Leung <daniel.leung@intel.com>
2019-06-27 16:08:32 -04:00
Yannis Damigos
ae781bd9bd dts: Restructure xtensa dts directory
Restructure xtensa dts directory

Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
2019-06-27 07:21:11 -04:00
Charles E. Youse
c5e582038c boards/x86/up_squared: default to new local APIC timer
This is the "flagship" platform for the new local APIC timer driver.
The opportunity is taken clean up the configuration as well, so the
choice of local APIC vs HPET timer requires changing only one Kconfig.

Signed-off-by: Charles E. Youse <charles.youse@intel.com>
2019-06-27 07:20:54 -04:00
Alexander Wachter
5946028671 boards: frdm-k64f: Enable CAN support
This commit enables CAN support for the FRDM-K64F board.

Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
2019-06-26 16:05:51 -05:00
Yaël Boutreux
2192f1d0a4 boards: arm: stm32mp157c_dk2: Add Arduino R3 connector definition
Add Arduino R3 connector equivalence to the stm32mp157c_dk2.

Signed-off-by: Yaël Boutreux <yael.boutreux@st.com>
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2019-06-26 09:36:52 -05:00
Howard Liu
f91d8386a3 doc: fix build command on Windows for VEGAboard
The path was changed during generating Ninja-based build system,
so the path of link script file was wrong when testing the
cross-compiler. Fix it by giving the absolute path for link script.

Signed-off-by: Howard Liu <howardliu7874@hotmail.com>
2019-06-26 09:15:03 -05:00
Manivannan Sadhasivam
9ad071cdbe boards: arm: Add 96Boards Avenger96 board support
Add board support for 96Boards Avenger96 board from Arrow Electronics
based on STM32MP157A MPU from ST Microelectronics. This board is one
of the consumer editions boards of the 96Boards family following the
Extented CE form factor. More information about this board can be found
in 96Boards website: https://www.96boards.org/product/avenger96/

By default Zephyr console output is available via RAM console, but it
can also be changed to UART7 exposed as UART0 on 40 pin LS header.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2019-06-26 07:37:35 -04:00
Carles Cufi
3b3bbc1ee0 Bluetooth: hci_uart: Use DT for the hci_uart UART
Use Device Tree,and in particular a new 'bt-c2h-uart' to select which
UART is being used to communicate with an external BLE Host when acting
as a Controller.

Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
2019-06-26 12:37:04 +02:00
Yaël Boutreux
eeb32641ce boards: shields: x_nucleo_iks01a2: doc: update dead URL link
Update dead URL linking to X-NUCLEO-IKS01A2 datasheet.

Signed-off-by: Yaël Boutreux <yael.boutreux@st.com>
2019-06-25 10:44:30 -05:00
Charles E. Youse
ca4910827b boards/x86/quark_d2000_crb: drop support for Quark D2000 dev board
Remove the board directory as well as references in tests and samples.

Signed-off-by: Charles E. Youse <charles.youse@intel.com>
2019-06-25 08:06:43 -04:00
Henrik Brix Andersen
348ef0f2a4 boards: twr_ke18f: enable CAN controller
Enable CAN bus controller on the NXP TWR-KE18F development board.

Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
2019-06-24 14:33:46 -05:00
Henrik Brix Andersen
dded1d076a dts: can: allow individual specification of prop seg and phase seg1 quanta
Allow individual specification of the time quanta used for the CAN bus
propagation segment and phase segment 1.

Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
2019-06-24 14:33:46 -05:00
Henrik Brix Andersen
64a9a04500 drivers: can: add support for two CAN controller instances
Add support for two CAN bus controller instances and disable both of
them by default. Enable CAN_1 for the STM boards currently supporting
CAN.

Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
2019-06-24 14:33:46 -05:00
Kumar Gala
2ee674fe32 board: mps2_an385: Remove board.h
The defines in board.h aren't used/buildable so lets remove it.  If
someone wants to support the button/led samples they can add DTS support
for those items.

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-06-24 07:20:31 -04:00
Andrei Gansari
58e05ddcc1 drivers: uart for LPC devices interrupt enabled
NXP's MCU LPC families uart interrupt was enabled.

Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
2019-06-21 11:24:09 -05:00
Kumar Gala
0bed1007ed dts: cleanup missing #{address,size}-cells
A few i2c and spi bus nodes were missing #address-cells and #size-cells
properties.

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-06-20 22:48:57 -05:00
Steven Wang
1b44f7ecdf doc: intel_s1000: install the license key manually
Updated the doc to add how to install the license key manually.

Signed-off-by: Steven Wang <steven.l.wang@linux.intel.com>
2019-06-20 08:48:20 -04:00
Anas Nashif
f2cb20c772 docs: fix misspelling across the tree
Found a few annoying typos and figured I better run script and
fix anything it can find, here are the results...

Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2019-06-19 15:34:13 -05:00
Ulf Magnusson
eba81c6e54 yaml: Remove redundant document separators
YAML document separators are needed e.g. when doing

  $ cat doc1.yaml doc2.yaml | <parser>

For the bindings, we never parse concatenated documents. Assume we don't
for any other .yaml files either.

Having document separators in e.g. base.yaml makes !include a bit
confusing, since the !included files are merged and not separate
documents (the merging is done in Python code though, so it makes no
difference for behavior).

The replacement was done with

    $ git ls-files '*.yaml' | \
        xargs sed -i -e '${/\s*\.\.\.\s*/d;}' -e 's/^\s*---\s*$//'

First pattern removes ... at the end of files, second pattern clears a
line with a lone --- on it.

Some redundant blank lines at the end of files were cleared with

    $ git ls-files '*.yaml' | xargs sed -i '${/^\s*$/d}'

This is more about making sure people can understand why every part of a
binding is there than about removing some text.

Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-06-19 10:40:10 +02:00
David B. Kinder
db60d4919a doc: fix broken references to zephyr files
The zephyr-file role creates a link to the GitHub copy of a file.  Some
files have been moved so update the file references in the documentation
(found by scanning for uses of :zephyr-file:)

Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
2019-06-18 16:01:55 -04:00
David B. Kinder
6b2cd29223 doc: fix misspellings in documentation
Fix misspellings and doc issues missed during regular reviews (including
some files without a trailing newline)

Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
2019-06-18 15:08:19 -04:00
George Dima
955cac617d boards: galileo: Fix PINMUX_FUNC_D for io_pin 9.
Modified PINMUX_FUNC_C (which appears twice in a row for io_pin 9) with
PINMUX_FUNC_D.

Signed-off-by: George Dima <dima331453@gmail.com>
2019-06-18 12:39:03 -04:00
Kumar Gala
03259dba90 drivers/i2c: Add missing HAS_DTS_I2C to nios
The NIOS I2C driver supported DTS, but missed HAS_DTS_I2C in
Kconfig for it.

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-06-18 11:22:23 -04:00
Erwan Gouriou
d9d6b59e2c boards: nucleo_wb55rg: Enable flash and debug with pyocd
stm32wb is not yet supported on openocd.
But support on pyocd can be enabled thanks to "pack" feature.
Configure board runner with pyocd and provide guidelines
to configure pyocd.


Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2019-06-18 08:04:12 -04:00
Erwan Gouriou
e6a4839c61 soc: stm32: STM32F7: Remove useless package digit
Fixes #16733, applied to STM32F7 series.

Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2019-06-18 08:03:40 -04:00
Erwan Gouriou
a54de3176d soc: stm32: STM32F4: Remove useless package digit
Fixes #16733, applied to STM32F4 series.

Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2019-06-18 08:03:40 -04:00
Erwan Gouriou
1a514a453b soc: stm32: STM32F2: Remove useless package digit
Fixes #16733, applied to STM32F2 series.

Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2019-06-18 08:03:40 -04:00
Manivannan Sadhasivam
49df0b10af boards: arm: Add support for 96Boards Meerkat96 board
Add board suppor for 96Boards Meerkat96 board from Novtech based on
NXP i.MX7 multi core processor. Zephyr is ported to run on the single
core Cortex-M co-processor on this board.

More information about this board can be found in 96Boards website:
https://www.96boards.org/product/imx7-96/

By default Zephyr console output is available via UART1 available at
the 40pin LS connector.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2019-06-17 16:25:00 -05:00
francois ramu
9210605390 boards: stm32f469i_disco: add more leds to board
Fixes "basic disco sample fails" #16687

Signed-off-by: francois ramu <francois.ramu@st.com>
2019-06-17 17:13:12 -04:00
Ioannis Konstantelias
1be3da290f boards: Change to new STM32L496XX symbol
stm32l496zg_disco and nucleo_l496zg were depending on STM32L496XG SOC.
With the recent change to STM32L496XX, the dependency should be updated.

Signed-off-by: Ioannis Konstantelias <ikonstadel@gmail.com>
2019-06-17 16:35:12 -04:00
Loic Poulain
d47df7f73f boards: mimxrt1064_evk: Enable USB device controller 1
Enabled node and add feature to doc.

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
2019-06-17 16:25:06 -04:00
Erwan Gouriou
b20f288a2b soc: stm32: STM32WB: Remove useless package digit
Fixes #16733, applied to STM32WB series.

Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2019-06-17 16:14:45 -04:00
Erwan Gouriou
dbad99ec92 soc: stm32: STM32L4: Remove useless package digit
Fixes #16733, applied to STM32L4 series.

Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2019-06-17 16:14:45 -04:00
Erwan Gouriou
191b30927b soc: stm32: STM32L0: Remove useless package digit
Fixes #16733, applied to STM32L0 series.

Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2019-06-17 16:14:45 -04:00
Carles Cufi
b476643695 doc: Cleanup references to cmake
Clean up some stray references to cmake in doc, boards and
samples that don't make explicit use of the zephyr app extension,
as well as other minor doc fixes.

Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
2019-06-17 10:09:57 -07:00
Ulf Magnusson
a84ded74ea dts: Replace status = "ok" with status = "okay"
The DT spec. only has "okay" and not "ok". The Linux kernel has around
12k "okay"s and 300 "ok"s.

The scripts/dts scripts only check for "disabled", so should be safe re.
those at least.

The replacement was done with

    git ls-files | xargs sed -i 's/status\s*=\s*"ok"/status = "okay"/'

Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-06-14 19:51:13 -05:00
Marti Bolivar
b587909427 doc: periodic updates to getting started guide
Updates based on discussion and changes in supported features.

- Make the guide shorter by removing content that's not relevant to
  most users who are truly just getting started, such as information
  about pre-LTS versions that did not support west, and by being more
  concise in some places.

- Decrease the number of colored boxes. At the latest TSC F2F, the
  "note / warning / note / tip" contents were identified as a
  readability problem.

- Add additional information based on new west features, like "west
  boards".

Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
2019-06-14 14:19:09 -04:00
Kumar Gala
a2693975d7 dts: Convert from DT_<COMPAT>_<INSTANCE>_<PROP> to DT_INST...
Change code from using now deprecated DT_<COMPAT>_<INSTANCE>_<PROP>
defines to using DT_INST_<INSTANCE>_<COMPAT>_<PROP>.

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-06-14 08:02:15 -05:00
Charles E. Youse
15223dd936 arch/x86/Kconfig: remove CONFIG_IA32_LEGACY_IO_PORTS
Hygiene. This option is never referenced by any code.

Signed-off-by: Charles E. Youse <charles.youse@intel.com>
2019-06-14 05:49:13 -04:00
Anas Nashif
c95b97db2e samples: spi_fujitsu_fram: remove whitelisting
Remove restrictive whitelisting and adapt board configuration causing
issues.

Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2019-06-13 16:09:02 -04:00
Anas Nashif
51cc6a4ffa samples: grove_light: remove whitelisting
Remove unnecessary whitelisting and fix boards to enable ADC instance
when ADC is configured in.

Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2019-06-13 16:09:02 -04:00
Anas Nashif
5ec6a537a3 doc: fix path to gdb in documentation
Documents were still pointing to gdb path of old SDK.

Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2019-06-11 22:07:52 -04:00
Nikos Oikonomou
4a38cae2af sensors: renamed hdc1008 driver into ti_hdc
Hdc1008 driver is renamed into ti_hdc to prepare it to support all
available Texas Instruments HDC sensors (e.g. hdc1080, hdc2080).

Signed-off-by: Nikos Oikonomou <nikoikonomou92@gmail.com>
2019-06-11 10:17:11 -05:00
Jan Van Winkel
a90c000790 native_posix: Added support to access flash via FUSE
Added support to access flash device partitions from host through
FUSE.

Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
2019-06-11 08:31:54 -04:00
Marti Bolivar
430d9eddf4 boards: nrf52_sparkfun: fix board.cmake
This can't possibly have worked since the initial merge of the board.

It looks like it was originally written as a port from a KBuild
Makefile fragment but never tested, and has only been touched by
tree-wide changes since then. Try to fix it.

I don't have this hardware, but it should work the same way as
96b_nitrogen if it truly supports pyocd.

Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
2019-06-11 08:28:35 -04:00
Piotr Mienkowski
abbd952d2b drivers: Add counter driver (RTCC) for SiLabs Gecko SoCs
This commit adds counter driver based on RTCC module for SiLabs Gecko
SoCs.

Tested with SLWSTK6061A / BRD4250B wireless starter kit.

Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
2019-06-10 22:27:25 -04:00
Alexandre Bourdiol
baa8e61e16 board: use ${ZEPHYR_BASE} instead of ${PROJECT_SOURCE_DIR}
Harmonization of all STM32 boards

Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
2019-06-10 12:42:49 +02:00
Alexandre Bourdiol
c2c28cf3b6 board: add call to zephyr_library() for stm32mp157c_dk2
Add call to zephyr_library() for stm32mp157c_dk2

Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
2019-06-10 12:42:49 +02:00
Alexandre Bourdiol
e1de4cf6b5 boards: Set pinmux.c compilation under switch CONFIG_PINMUX
Fix compilation issue for STM32 boards with CONFIG_PINMUX=n
Fixes #16177

Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
2019-06-10 12:42:49 +02:00
Charles E. Youse
f3611fdd0c boards/x86_jailhouse: remove support for Jailhouse hypervisor
This configuration is not used, maintained or tested, so it is removed.

Signed-off-by: Charles E. Youse <charles.youse@intel.com>
2019-06-08 15:41:36 -04:00
Charles E. Youse
0fe4e1b3a8 arch/x86: x2APIC support is not specific to jailhouse
Simple renaming and Kconfig reorganization. Choice of local APIC
access method isn't specific to the Jailhouse hypervisor.

Signed-off-by: Charles E. Youse <charles.youse@intel.com>
2019-06-08 15:41:36 -04:00
Henrik Brix Andersen
ac4294216b boards: arm: twr_ke18f: add ADC support
Add support for reading the onboard potentiometer (ADC0 channel
12) and thermistor (ADC0 channels 0 and 1).

Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
2019-06-07 14:30:59 -05:00
Roger N'Guessan
5d57edd2b3 boards: nucleo_wb55rg: add I2C doc
add I2C doc

Signed-off-by: Roger N'Guessan <roger.nguessan@st.com>
2019-06-07 11:47:59 -04:00
Roger N'Guessan
3df5ae68a7 boards: nucleo_wb55rg: Enable I2C
Enable I2C on nucleo_wb55rg

Signed-off-by: Roger N'Guessan <roger.nguessan@st.com>
2019-06-07 11:47:59 -04:00
Marti Bolivar
35d4e62300 boards: allow cmake-time overrides of all runners
Convert all board_set_xxer(foo) calls to board_set_xxer_ifndef(foo),
which allows the user to make their own decision at CMake time.

Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
2019-06-07 13:43:51 +02:00
Marti Bolivar
1717332c7a cmake: add helpers for setting board runners
This helps by letting us add checks for when the runner has already
been set. There is documentation saying you can set
-DBOARD_DEBUG_RUNNER at the command line and have it take effect,
which turns out not to be true for a large number of boards.
A status message helps the user debug.

(We'll address the existing in-tree boards in the next patch.)

Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
2019-06-07 13:43:51 +02:00
Alexey Brodkin
40dbec4cd1 ARC: Mention ARC EM family instead of EM4 template
ARC EM4 is just a baseline configuration of ARC EM family of CPU cores.
But with addition of more featuers like caches, DSP extensions etc
we're effectively getting EM6, EM5D etc templates.

So to not confuse users let's talk about families of ARC cores
as that's what makes sense together with extra features but not
templates itself.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2019-06-06 14:20:42 -04:00
Alexey Brodkin
c5663caf77 board/nsim: Refactor device tree description
Instead of blind copy of nsim_em.dts re-structure this way:
 * nsim.dtsi     - Top-level "board" description re-usable for
 |                 all nSIM-based "boards".
 |
 |                 Even though it's not needed right now but it
 |                 allows to add other ARC core families in the future.
 |
 \_ nsim_em.dtsi - Common definitions for boards with ARC EM cores
    |
    \_ Real boards with ARC EM cores
      |
      \ nsim_em.dts
      \ nsim_sem.dts
      \ nsim_em_mpu_stack_guard.dts
      \ nsim_sem_mpu_stack_guard.dts

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2019-06-06 14:20:42 -04:00
Alexey Brodkin
797165044f board/nsim: Move CPU selection in defconfigs
This will allow us to easily specify other CPUs looking
forward and not rely on any default value.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2019-06-06 14:20:42 -04:00
Alexey Brodkin
b1dcf05c68 board/nsim: Make it CPU-family independent
ARC nSIM simulates all flavors or ARC cores so there's
no point in limiting its usage to ARC EM family only.

Moreover with upcoming addition of ARC HS family support
in Zephyr we'll be re-using nSIM "board" for them as well.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2019-06-06 14:20:42 -04:00
Alexey Brodkin
bceaed67b3 simulation: ARC EM in nSIM to use nsim_em.props
This matches a naming scheme used for other flavour of ARC EM
SoC flavors.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2019-06-06 14:20:42 -04:00
Andrew Boie
55ff4ba5df x86: add qemu_x86_coverage target
Builds with coverage enabled are in a continuous state
of bit-rot as no CI job enables it. Introduce a dedicated
x86 target that builds with coverage enabled.

Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
2019-06-06 09:29:12 -07:00
David B. Kinder
9bcf629828 doc: fix typo in gpmrb doc
Fix typo missed during regular review

Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
2019-06-05 21:13:33 -04:00
Geoffroy Van Cutsem
57728ffb27 boards/x86: scripts: build_grub.sh to use grub-2.04-rc1-17-g8e8723a6b
Newer versions of GCC (e.g. gcc 9.1.1) fail to compile the version of
Grub that is used by the Zephyr build_grub.sh script. This patch updates
the version of Grub to the latest (as of June 4 2019) which includes a
number of fixes that solve the problem.

Fixes: #16624
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
2019-06-04 19:32:44 -04:00
Charles E. Youse
69c01d11e5 boards/x86/gpmrb: add Gordon Peak MRB board
Add board support (and documentation) for the Intel Gordon Peak
Module Reference Board, a dev board based on the Apollo Lake SoC.

Signed-off-by: Charles E. Youse <charles.youse@intel.com>
2019-06-04 14:50:47 -04:00
Andrei Gansari
d403cac17f boards: lpcxpresso55s69 initalization
Board LPCXpresso55S69 added to supported zephyr boards, initial simple
configuration to boot board and use UART.

Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
2019-06-03 15:49:35 -05:00
Anas Nashif
76d9d7806d x86: remove unused and x86 only latency benchmark
We do have a multi-architecture latency benchmark now, this one was x86
only, was never used or compiled in and is out-dated.

Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2019-06-03 09:42:00 -07:00
Lyle Zhu
34b0516466 boards: riscv32: rv32m1_vega: enable MCUboot for ri5cy core
1. Add flash partitions.
2. Add macro DT_START_UP_ENTRY_OFFSET. The entry of the RV32M1 is
   not the start of the vector table. Add the macro to inform the
   entry offset.
3. Update linker file to support MCUboot
   a. For normal cases (CONFIG_BOOTLOADER_MCUBOOT is cleared), the
   vector table is located last 256bytes of the flash.
   b. If CONFIG_BOOTLOADER_MCUBOOT is set, the vector table is located
   after the image header of MCUboot.

Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
2019-06-03 10:43:47 -05:00
Henrik Brix Andersen
219fa3c18d boards: twr_ke18f: configure SPI CS pins as GPIO if not used for SPI
Configure the LPSPI PCSx pins as GPIO if not dedicated to SPI CS. This
allows using them for SPI GPIO CS.

Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
2019-06-03 09:43:34 -05:00
Erwan Gouriou
2566981294 boards: nucleo_wb55rg: Configure flash partitions
Configure flash partitions on nucleo_wb55rg

Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2019-06-03 09:38:19 -04:00
Erwan Gouriou
d3601f0d98 boards: nucleo_wb55rg: Configure HCI driver
Add requested configuration to enable HCI driver

Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2019-06-03 09:38:19 -04:00
Charles E. Youse
0fcc484944 boards/up_squared: soc/apollo_lake: I2C driver selection at SoC
While enabling specific I2C ports does indeed belong at the board
level Kconfig, the selection of driver (I2C_DW) is an SoC-level
choice, so it is moved accordingly.

Signed-off-by: Charles E. Youse <charles.youse@intel.com>
2019-06-01 10:00:32 -04:00
Charles E. Youse
2b01e06052 boards/up_squared: soc/apollo_lake: enable UARTs per board, not SoC
Which UARTs are broken out from the SoC on a particular board is
board-specific; don't enable UARTs blindly in the SoC Kconfig.

Also, the default UART options are specified in the driver Kconfig, so
the same defaults specified in the SoC Kconfig are redundant. Removed.

Signed-off-by: Charles E. Youse <charles.youse@intel.com>
2019-06-01 10:00:32 -04:00
Charles E. Youse
c5aa535c98 boards/up_squared: soc/apollo_lake: devicetree default to status="ok"
Since Kconfig is responsible for enabling/disabling devices at build,
the devices in dt are defaulted to status="ok" to keep the output in
generated_dts_board.conf the same across configurations and simplify
the board-level dts files.

Signed-off-by: Charles E. Youse <charles.youse@intel.com>
2019-06-01 10:00:32 -04:00
Charles E. Youse
c0502d9602 soc/apollo_lake: boards/up_squared: move UART fixups to SoC
The UART references in dts_fixup.h are actually SoC-specific, not
board-specific, so they are moved. Since this leaves the board fixups
empty, the file is removed.

The SoC fixups are expanded to include the additional two ports that
are present on some revisions of the Apollo Lake.

Signed-off-by: Charles E. Youse <charles.youse@intel.com>
2019-06-01 10:00:32 -04:00
Mark Wang
b1558bba2b boards: frdm_k64f: button_1 has no callback when button is released
need set the internal pull-up for the button gpio.

Signed-off-by: Mark Wang <yichang.wang@nxp.com>
2019-05-31 14:35:36 -05:00
Henrik Brix Andersen
0382f08f2a boards: arm: twr_ke18f: add SPI support
Add SPI support to the NXP TWR-KE18F development board. There are no
onboard SPI devices, but both SPI busses are available on the primary
Tower System elevator connector.

Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
2019-05-31 09:54:03 -05:00
Nathaniel Graff
89d81ab09d boards/hifive1: Add copyright and license to dts
The hifive1 board devicetree was missing a copyright and license.

Signed-off-by: Nathaniel Graff <nathaniel.graff@sifive.com>
2019-05-30 18:40:26 -04:00
Brett Witherspoon
6cf806ac9a boards: cc1352r1_launchxl / cc26x2r1_launchxl: enable ROM bootloader
This enables the ROM bootloader on the CC13x2 / CC26x2 LaunchPad
development boards. The bootloader can be started by holding BTN-1
during reset. This can be useful during development to recover a board
if DAPs get disabled.

Signed-off-by: Brett Witherspoon <spoonb@cdspooner.com>
2019-05-30 17:15:53 -04:00
Nathaniel Graff
73a96c0052 soc/riscv32: Make clock init code common to SoC
The HiFive1 and HiFive1 Rev B share the same clock initialization
code, so put it in soc/riscv32/riscv-privilege/sifive-freedom.

Signed-off-by: Nathaniel Graff <nathaniel.graff@sifive.com>
2019-05-30 16:54:02 -04:00
Nathaniel Graff
8b40260283 boards/riscv32: Add support for the HiFive1 Rev B
The HiFive1 Rev B adds the following features to the
original HiFive1:

 - A second UART peripheral 'uart_1'
 - A hardware I2C peripheral 'i2c_0'
 - Segger J-Link OB
 - An ESP32-WROOM attached to the 'spi_1' peripheral bus

Signed-off-by: Nathaniel Graff <nathaniel.graff@sifive.com>
2019-05-30 16:54:02 -04:00
Michael Scott
46d3e86ee8 boards: rv32m1_vega_ri5cy: set shell UART in DTS
This fixes any sample which enabled CONFIG_SHELL.

Signed-off-by: Michael Scott <mike@foundries.io>
2019-05-30 09:21:39 -05:00
Peter A. Bigot
be4c6ddd9c boards: arm: particle_*: enable PCB antenna on startup
All three boards use a Skyworks SPDT switch to control whether the
antenna is connected to a PCB antenna or an external u.FL connector.
None of them power up in a state that properly enables an antenna.
Add startup code to configure for the PCB antenna.

Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/14123

Signed-off-by: Peter A. Bigot <pab@pabigot.com>
[mike@foundries.io: adjusted code to use Zephyr GPIO APIs.  boron is
now also based on DTS.]
Signed-off-by: Michael Scott <mike@foundries.io>
2019-05-30 09:46:55 -04:00
Peter A. Bigot
6fa058c994 boards: nrf52840_papyr: support nrfjprog flash runner
Add JLink via nrfjprog as an alternative to Black Magic.

Signed-off-by: Peter A. Bigot <pab@pabigot.com>
2019-05-30 09:33:44 -04:00
Stefan Kraus
f27c8c00a2 96b_nitrogen: Increase size of boot partition.
MCUboot needs nearly all 8 pages, on some commits even more. This leads
to a overwrite of parts of mcuboot code when an application is flashed.
By improving the size of the boot partition to 10 pages (from 8) and
decrease both application slots by 1 page, MCUboot fits in the boot
loader partition. This is also fixable by an extra .dts, but having an
out of the box working configuration is preferable.

Signed-off-by: Stefan Kraus <stefan.kraus@fau.de>
2019-05-30 09:29:57 -04:00
Antony Pavlov
925183cbcc boards/arm/olimex_stm32_e407: enable USB
Tested with samples/subsys/usb/cdc_acm.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
2019-05-30 06:52:33 -05:00
Mark Wang
906f3789f2 dts: nxp: nxp_rt: add usbd1 for rt1050 and works as default usb.
add usbd1 and use it as the default usb device.

Signed-off-by: Mark Wang <yichang.wang@nxp.com>
2019-05-30 06:45:12 -05:00
Sathish Kuttan
0a6cb2ee58 doc: intel_s1000: image download from Linux host
Documentation update to add instructions to download a
zephyr binary to the target from a Linux host

Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
2019-05-29 22:44:35 -04:00
Sathish Kuttan
8075de7b94 boards: intel_s1000_crb: Image download scripts
Python scripts to download a zephyr binary image (zephyr.bin) to
Intel S1000 from a linux host.
The linux host's SPI master and GPIOs shall be connected to the
corresponding SPI slave and I/Os respectively.

Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
2019-05-29 22:44:35 -04:00
Sathish Kuttan
d714f640c8 boards: intel_s1000_crb: Host interface config
A YAML file to specify configuration of interface I/Os
such as the SPI device, GPIOs, etc.
The image download script configures the host's SPI and GPIO
interfaces accordingly.

Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
2019-05-29 22:44:35 -04:00
Erwan Gouriou
eb97fea741 boards: nucleo_wb55rg: configure LPUART
Configure LPUART as btmon interface and
re-instantiate usart1 as console output (using ST-Link VCP)


Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2019-05-29 10:58:36 -04:00
Jan Van Winkel
88964b99ec drivers: flash: Added native POSIX flash driver
Added native POSIX flash driver that writes flash content to a binary
file.

Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
2019-05-28 21:14:19 -04:00
Jan Van Winkel
7a246c30bd dts: posix: Add DTS support for POSIX architecture
Added device tree support for POSIX architecture based boards.

Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
2019-05-28 21:14:19 -04:00
Jun Li
951a82d029 board: nucleo_f429zi: add partitions to support mcuboot
Add partition table to support MCUBoot. A paragraph of
usage comments was also added in the board documentation.

Signed-off-by: Jun Li <jun.r.li@intel.com>
2019-05-28 21:13:30 -04:00
Henrik Brix Andersen
58decac9bf boards: twr_ke18f: list hwinfo as supported feature
List hwinfo as a supported feature on the NXP TWR-KE18F development
board.

Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
2019-05-28 12:18:24 -05:00
Matthew Koch
2e2a2d2d55 boards: stm32f7: Remove DTCM from sram0
Adjust board memory sizes to exclude DTCM RAM.

Fixes: #15910

Signed-off-by: Matthew Koch <koch.matthew@gmail.com>
2019-05-28 11:02:29 -04:00
Anas Nashif
89d393649b esp: move HAL to external repo
This HAL is now in its own repository on
https://github.com/zephyrproject-rtos

Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2019-05-28 08:28:57 -04:00
Alberto Escolar Piedras
bcb9141b6e native_posix: Run in real time by default with host BT
For native_posix, set NATIVE_POSIX_SLOWDOWN_TO_REAL_TIME
by default when a host BT adapter is selected even if TEST
was also set. As using host peripherals one normally needs
also to run with the host time.

Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
2019-05-27 22:25:20 +02:00
Aurelien Jarno
819e749ccd usb: move the request handler buffer to the USB device code
In order to unify the legacy and composite code, move the class and
vendor request handler buffer into the USB device code, just like in
composite mode. The option is renamed from USB_COMPOSITE_BUFFER_SIZE
into USB_REQUEST_BUFFER_SIZE and also replaces the USB_DFU_MAX_XFER_SIZE
and USB_HID_MAX_PAYLOAD_SIZE options.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
2019-05-27 09:25:06 -04:00
Francisco Munoz
bce16753af boards: mec15xxevb_assy6853: Use the pinmux api
Use the generic pinmux APIs provided by zephyr to select
alternate functions.

This also contains a fix for a formatting issue in the
documentation for this board. Additionally, the serial
console is now on UART2.

Signed-off-by: Francisco Munoz <francisco.munoz.ruiz@intel.com>
2019-05-27 09:24:08 -04:00
Antony Pavlov
2099658d09 boards/arm/*stm32*: fix USB pinmux
USB_DC_STM32 comes from Kconfig. We have to add the CONFIG_ prefix
to use USB_DC_STM32 in C code.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
2019-05-27 09:22:55 -04:00
Brett Witherspoon
d82febd2a3 boards: cc1352r1_launchxl: enable support for SPI
Enable support for the SPI peripheral on the CC1352R LaunchPad.

Signed-off-by: Brett Witherspoon <spoonb@cdspooner.com>
2019-05-27 09:21:19 -04:00
Brett Witherspoon
b9cf58d90f boards: cc26x2r1_launchxl: enable support for SPI
Enable support for the SPI peripheral on the CC26x2R LaunchPad.

Signed-off-by: Brett Witherspoon <spoonb@cdspooner.com>
2019-05-27 09:21:19 -04:00
Michael Scott
b925e4c09b boards: rv32m1_vega: add Arduino header information
OpenISA Vega board has Arduino headers which can be configured for
use with Arduino-compatible shields.  To enable this in Zephyr,
let's define the gpio-map for Vega and set the appropriate
arduino_serial linkage.

Signed-off-by: Michael Scott <mike@foundries.io>
2019-05-27 09:15:05 -04:00
Erwan Gouriou
8feaa27ce9 boards: disco_l475_iot1: create .dtsi connector file
Create a dedicated connector file to hold arduino connector
information for disco_l475_iot board.
This should enhance board dts file readability.

Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2019-05-25 18:34:31 -04:00
Maureen Helm
4de99994f0 scripts: west: Add reset-after-load argument to jlink runner
Adds a new argument to the jlink runner to reset the device after
loading code to flash. This fixes a problem with the lpcxpresso54114
board where it was necessary to manually reset the board to get new code
to start running after the 'ninja flash' command. This new argument is
optional and false by default because there are some cases were we must
not reset after load, such as when we load the application into ITCM on
imx rt devices.

Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2019-05-25 10:01:30 -04:00
Henrik Brix Andersen
4770b1ebec boards: arm: twr_ke18f: add I2C support
Add I2C support to the NXP TWR-KE18F development board.

Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
2019-05-24 09:51:10 -05:00
Kumar Gala
18ab73d02c dts: nxp: nxp_rt: Fix unit-address for usb node
The first reg of the node is 0x402E0200 so the unit address should match
that.

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-05-24 09:47:18 -05:00