Convert max44009 sensor driver and sample app to utilize device tree.
Introduce a dts board overlay on the frdm_k64f board to ensure we at
least have a single platform in which the sample gets built.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert mcp9808 sensor driver and sample app to utilize device tree.
Introduce a dts board overlay on the frdm_k64f board to ensure we at
least have a single platform in which the sample gets built.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert sx9500 sensor driver and sample app to utilize device tree.
Introduce a dts board overlay on the frdm_k64f board to ensure we at
least have a single platform in which the sample gets built.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert tmp112 sensor driver and sample app to utilize device tree.
Introduce a dts board overlay on the frdm_k64f board to ensure we at
least have a single platform in which the sample gets built.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert th02 sensor driver and sample app to utilize device tree.
Introduce a dts board overlay on the frdm_k64f board to ensure we at
least have a single platform in which the sample gets built.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Mark the old time conversion APIs deprecated, leave compatibility
macros in place, and replace all usage with the new API.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The new conversion API has a ton of generated utilities. Test it via
enumerating each one of them and throwing a selection of both
hand-picked and random numbers at it. Works by using slightly
different math to compute the expected result and assuming that we
don't have symmetric bugs in both.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Promote the private z_arch_* namespace, which specifies
the interface between the core kernel and the
architecture code, to a new top-level namespace named
arch_*.
This allows our documentation generation to create
online documentation for this set of interfaces,
and this set of interfaces is worth treating in a
more formal way anyway.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Adding a Kconfig option for this test to configure the SPI in LOOP
mode. This saves physical wiring for hardware that support it.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
Making CONFIG_SPI_ASYNC optional allows the test to be run on devices
where the feature is not yet supported in the driver.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
Add EEPROM API test suite.
The test suite is written to run in userspace but it is currently only
whitelisted for native_posix and native_posix_64 boards which do not
support userspace.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Update the board overlays used in the i2c_slave_api tests to match the
new device tree bindings for atmel,at24 I2C EEPROMs.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
We add a new test-case for the mem_protect and userspace tests,
to test the ARMv8-M MPU driver without the skipping of full SRAM
partitioning (i.e. gap filling).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit refactors kernel and arch headers to establish a boundary
between private and public interface headers.
The refactoring strategy used in this commit is detailed in the issue
This commit introduces the following major changes:
1. Establish a clear boundary between private and public headers by
removing "kernel/include" and "arch/*/include" from the global
include paths. Ideally, only kernel/ and arch/*/ source files should
reference the headers in these directories. If these headers must be
used by a component, these include paths shall be manually added to
the CMakeLists.txt file of the component. This is intended to
discourage applications from including private kernel and arch
headers either knowingly and unknowingly.
- kernel/include/ (PRIVATE)
This directory contains the private headers that provide private
kernel definitions which should not be visible outside the kernel
and arch source code. All public kernel definitions must be added
to an appropriate header located under include/.
- arch/*/include/ (PRIVATE)
This directory contains the private headers that provide private
architecture-specific definitions which should not be visible
outside the arch and kernel source code. All public architecture-
specific definitions must be added to an appropriate header located
under include/arch/*/.
- include/ AND include/sys/ (PUBLIC)
This directory contains the public headers that provide public
kernel definitions which can be referenced by both kernel and
application code.
- include/arch/*/ (PUBLIC)
This directory contains the public headers that provide public
architecture-specific definitions which can be referenced by both
kernel and application code.
2. Split arch_interface.h into "kernel-to-arch interface" and "public
arch interface" divisions.
- kernel/include/kernel_arch_interface.h
* provides private "kernel-to-arch interface" definition.
* includes arch/*/include/kernel_arch_func.h to ensure that the
interface function implementations are always available.
* includes sys/arch_interface.h so that public arch interface
definitions are automatically included when including this file.
- arch/*/include/kernel_arch_func.h
* provides architecture-specific "kernel-to-arch interface"
implementation.
* only the functions that will be used in kernel and arch source
files are defined here.
- include/sys/arch_interface.h
* provides "public arch interface" definition.
* includes include/arch/arch_inlines.h to ensure that the
architecture-specific public inline interface function
implementations are always available.
- include/arch/arch_inlines.h
* includes architecture-specific arch_inlines.h in
include/arch/*/arch_inline.h.
- include/arch/*/arch_inline.h
* provides architecture-specific "public arch interface" inline
function implementation.
* supersedes include/sys/arch_inline.h.
3. Refactor kernel and the existing architecture implementations.
- Remove circular dependency of kernel and arch headers. The
following general rules should be observed:
* Never include any private headers from public headers
* Never include kernel_internal.h in kernel_arch_data.h
* Always include kernel_arch_data.h from kernel_arch_func.h
* Never include kernel.h from kernel_struct.h either directly or
indirectly. Only add the kernel structures that must be referenced
from public arch headers in this file.
- Relocate syscall_handler.h to include/ so it can be used in the
public code. This is necessary because many user-mode public codes
reference the functions defined in this header.
- Relocate kernel_arch_thread.h to include/arch/*/thread.h. This is
necessary to provide architecture-specific thread definition for
'struct k_thread' in kernel.h.
- Remove any private header dependencies from public headers using
the following methods:
* If dependency is not required, simply omit
* If dependency is required,
- Relocate a portion of the required dependencies from the
private header to an appropriate public header OR
- Relocate the required private header to make it public.
This commit supersedes #20047, addresses #19666, and fixes#3056.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Running the test under valgrind identified three places where an
uninitialized stack buffer was used as the source of data over which a
CRC was incidently calculated, causing an uninitialized value warning
in the CRC calculation. Zero out the source buffers before using them
as a data source.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This commit limits the data length code to eight.
DLC > 8 returns a newly introduced CAN_TX_EINVAL error code.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Replace CONFIG_WDT_0_NAME with DT_ALIAS_WATCHDOG_0_LABEL in samples and
test code. Now that all drivers are DT aware we don't ever set the
Kconfig option.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Update lis3mdl-magn dts binding to include GPIO interrupt pin and change
driver code to get the GPIO pin and controller info from DT instead of
Kconfig.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Parse output of test to verify success, this was previously treated as a
test and now it is using the console handler, so we need to verify
success using regex.
Fixes: #20177
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Previous defconfig for dma is DMA_STM32F4X in this board, while the new
generic driver uses DMA_STM32 to enable DMA support, and also dma driver
of stm32 now needs HEAP_MEM_POOL_SIZE to be big enough to hold dma
stream instances.
Additional .conf files are added for also adding HEAP_MEM_POOL_SIZE
configuration to two test cases.
Signed-off-by: Song Qiang <songqiang1304521@gmail.com>
Tests fail with the default 512 byte main stack size. Increase it
just as the idle stack size has been increased over default.
Closes#20202
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Updated tests/crypto/rand32/ to include cryptographic test cases.
Added config file for rand32_ctr_drbg generator.
Signed-off-by: David Leach <david.leach@nxp.com>
Use this short header style in all Kconfig files:
# <description>
# <copyright>
# <license>
...
Also change all <description>s from
# Kconfig[.extension] - Foo-related options
to just
# Foo-related options
It's clear enough that it's about Kconfig.
The <description> cleanup was done with this command, along with some
manual cleanup (big letter at the start, etc.)
git ls-files '*Kconfig*' | \
xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
convert sample and test yaml filters that utilize a DT_ define to
instead use a dt_ function. The intent is to remove the Kconfig
generated DT defines and just make directy queries into the device tree.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Using a device with a kernel clock below 1MHz (e.g. nRF52) resulted in
a division by zero. Added support for such devices by multiplying
before dividing.
Signed-off-by: Mario Noseda <mario.noseda@zhaw.ch>
Some cleanup in tests code as after duplicates filtering
was introduced there is no need to interpret 0-length readout in
settings h_set handler
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Added a Kconfig option to disable Zephyrs cpp implementation for
operator new, delete, pure virtual functions and vtables.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
Confirm that std::make_unique<> functions as intended. This is an
indirect test of new/delete using best-practices API.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
the following compile warning will fail the CI:
/zephyr/tests/kernel/fp_sharing/generic/src/float_regs_arc_gcc.h:
41:8: error: /unused variable 'temp' [-Werror=unused-variable]
/zephyr/tests/kernel/fp_sharing/generic/src/float_regs_arc_gcc.h:
75:8: error: /unused variable 'temp' [-Werror=unused-variable]
cc1: all warnings being treated as errors
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Unused since commit f3f8f96842 ("tests: i2c_slave_spi: update to
proposed DT compatible naming").
Found with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
There are two set of code supporting x86_64: x86_64 using x32 ABI,
and x86 long mode, and this consolidates both into one x86_64
architecture and SoC supporting truly 64-bit mode.
() Removes the x86_64:x32 architecture and SoC, and replaces
them with the existing x86 long mode arch and SoC.
() Replace qemu_x86_64 with qemu_x86_long as qemu_x86_64.
() Updates samples and tests to remove reference to
qemu_x86_long.
() Renames CONFIG_X86_LONGMODE to CONFIG_X86_64.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
According to the comment in #20008 I found out that some test cases
for different tests have same names.
To get rid of it, I decided to change test cases names.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
According to the comment in #20008 I found out that some test cases
for different tests have same names.
To get rid of it, I decided to change test cases names.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
This commit adds a new test suite in tests/arch/arm that
intends to testing system faults inside interrupts.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The build scripts for the tests/crypto/rand32 test has been invoking
'zephyr_include_directories' in an invalid way. They have presumably
been trying to modify the 'app' library, but have in effect being
modifying the global environment, in an invalid way nonetheless.
This patch fixes the build script to modify the 'app' library only.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
According to the comment in #20008 I found out that some test cases
for different tests have same names.
To get rid of it, I decided to change test cases names.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
According to the comment in #20008 I found out that some test cases
for different tests have same names.
To get rid of it, I decided to change test cases names.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
According to the comment in #20008 I found out that some test cases
for different tests have same names.
To get rid of it, I decided to change test cases names.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
According to the comment in #20008 I found out that some test cases
for different tests have same names.
To get rid of it, I decided to change test cases names.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
After run Sanitycheck script I found out that some test cases
have the same test case name in the test result .xml file.
To get rid of it, I decided to change test cases names
for the kernel tests.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
According to the comment in #20008 I found out that some test cases
for different tests have same names.
To get rid of it, I decided to change test cases names.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Some test cases have the same test case name.
To get rid of it, I decided to change test cases names
contained same names.
Please check my logic, how I give them names.
Usually trying to give name same as a directory folder.
There are still more test cases which necessary to change,
but I will make changes by small steps.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Test case arch.interrupt have same test case name
for different architectures. To get rid of it,
I decided to change test cases names.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
The k_thread_state_str is a new function added into
kernel/thread.c recently which was used to return
the human friendly thread state, so it hasn't been
called by other existing code.
In order to improve the function code coverage, we
just replace the "th->base.thread_state & _THREAD_PENDING"
code by using k_thread_state_str function in
tests/kernel/sched/preempt/src/main.c, because
k_thread_state_str function is realized by judging
the thread_state member to return the thread state.
Signed-off-by: peng1 chen <peng1.chen@intel.com>
Move to using DT define instead of a Kconfig param, also remove unused
I2C Kconfig params for this test.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This test seems a little confused.
Adjust the calibration to allow 110ms sleeps to avoid error
during automated testing.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
This test case is has a tolerance of 1ms, but systems with a tick slower
than 1000 ticks/sec may spil outside the 1ms tolerance.
Tolerance adapts to system's ticks/sec, e.g. QEMU targets have
100ticks/sec -> tolerance is 10ms.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
We don't have to build an image for running test timeutil. We
can just build a native app to test it. So move it into "unit"
directory.
Also, add 64-bit support for unit testing framework.
Signed-off-by: Steven Wang <steven.l.wang@linux.intel.com>
After run Sanitycheck script I found out that test cases
had the same test case name in the test result .xml file.
For board itodk in .xml file was duplicated kernel.common test.
To get rid of it, I decided to change test cases names
for the kernel tests, contained name kernel.common.
Now only one test has kernel.common test name,
and will be no duplicated test cases names in the future.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
The current implementation of kernel interrupt tests incorrectly
infers NVIC, which is specific to Cortex-M, from CONFIG_ARM.
This commit fixes such incorrect NVIC inferences by using
CONFIG_CPU_CORTEX_M instead of CONFIG_ARM.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Unused since commit 6fd6b7e50a ("xtensa: remove legacy arch
implementation").
Found with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
NVS back-end initialization should fetch size of the flash erase blocks
from the flash API instead of DT. This allows to work well when used
storage partition is not located in embedded memory.
NVS back-end sector multiplier configuration was set to 8K as
DT value for native posix targets
flash sector sizes is 1 B, while its flash driver supports 8k.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Unused after commit a76814bfb6 ("net: Convert core IP stack to use log
levels").
Found with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Stops leaking very long source paths in build directories; makes them
deterministic. Finishes what was started in commit b4282bf72d, see
rationale and code reviews there.
See also CMake issue https://gitlab.kitware.com/cmake/cmake/issues/19475
for more details.
Use the opportunity to remove the most obvious duplication.
Test with: sanitycheck -T $ZEPHYR_BASE/tests/subsys/settings/
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
If the ICMPv6 test is run in real hw, we need a bit more buffers
to pass the test.
Fixes#19915
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
* add the case for ARC in yaml after dynamic and direct irq are
supported
* fix the bug that index in sw_isr_table should have a offset of
CONFIG_GEN_IRQ_START_VECTOR
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
This commit fixes the FCB delete test after PR #19541.
Now the entity callback is not called on deleted element.
Issue: #19963
Signed-off-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
Stack size might be too small when running the test in real
board like sam-e70.
Fixes#19914
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Work in topic-gpio to convert drivers to properly use devicetree flag
settings requires that these be defined so sanitycheck can find them.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
After run Sanitycheck script I found out that
some test cases have a same test case name
in the test result .xml file.
For boards mimxrt1050_evk, qemu_x86, sam_e70_xplained
in .xml files that cases were dublicated.
Problem happened only with cases net.dns.no_ipv6.init
and net.dns.init. Only that cases were dublicated.
To solve it, I decided to change test cases names for the dns tests.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
This commit enables running the test in CI for nRF51-based
platforms, which require special IRQ lines for the IRQs
used in the test. An additional customization is needed
for QEMU_CORTEX_M0, which uses a different system timer
based on TIMER0 peripheral.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit enables running the test in CI for Cortex-M Baseline
architecture. As STIR register is not present in Baseline cores,
we need a minor modification in the test code so it uses NVIC
intrisics instead of setting the STIR for ARMv6-M.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We do not need to explicitly define the size of the const
array elements for the customized IRQ vector, used in the
test. The compiler should be able to infer the actual size
by counting the provided entries.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This symbol is not user-configurable (has no prompt), so assignments in
prj.conf have no effect on it.
(It has no defaults either, and isn't selected/implied, so nothing in
vanilla Zephyr will ever enable it.)
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
With the changes in PR #19836 applications now need to explicitly
include hci.h to use defines from it. Fix two sample/tests apps which
were missing this.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The default main stack is too small for some boards so increasing
it to 2048. The issue was seen with sam_e70_xplained.
Fixes#19762
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We add a test-case in kernel/fatal test suite, to test that
the application developer can induce a SW-generated exception
with any 'reason' value.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We replace an inline assembly block of code with CMSIS
functions, to make it portable to ARMv6-M architecture.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The struct definitions for pdpt, pd, and pt entries has been
removed:
- Bitfield ordering in a struct is implementation dependent,
it can be right-to-left or left-to-right
- The two different structures for page directory entries were
not being used consistently, or when the type of the PDE
was unknown
- Anonymous structs/unions are GCC extensions
Instead these are now u64_t, with bitwise operations used to
get/set fields.
A new set of inline functions for fetcing various page table
structures has been implemented, replacing the older macros.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This hasn't been necessary since we dropped support for 32-bit
non-PAE page tables. Replace it with u64_t and scrub any
unnecessary casts left behind.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This will be used for both 32-bit and 64-bit mode.
This header gets pulled in by x86's arch/cpu.h, so put
it in include/arch/x86/.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This commit adds a possibility to activate duplicates filtering
during direct loading.
JIRA: NCSDK-3017
Signed-off-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
This commit adds a possibility to activate duplicates filtering
during direct loading.
JIRA: NCSDK-3017
Signed-off-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
A few settings module variables were not initialized before used.
Normally these variable are initialized in the back-end
initialization call which couldn't be done in affected unit tests.
This path initialize these variable via assignments in test code.
fixes#19722
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
On 64-bit targets, the minimum possible mempool block size is not 8
but 16. With a max block size of 32, the mempool allocator cannot
split it into 4 sub-blocks, reducing the available memory allocations
to that original 32-byte block only.
To get the same allocation patterns and test behavior whether it is
built for a 32-bit or 64-bit architecture, let's define BLK_SIZE_MIN
and BLK_SIZE_MAX in terms of _MPOOL_MINBLK instead of literal values.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Documentation for k_pipe_block_put() says:
This routine writes the data contained in a memory block to pipe.
Once all of the data in the block has been written to the pipe,
it will free the memory block.
Therefore it is wrong to free the memory block within the test code.
When the mempool allocator is instrumented to detect double-free
instances, this case is signaled right away.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Re-run with updated script to convert integer literal delay arguments
to k_thread_create and K_THREAD_DEFINE to use the standard timeout
macros.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Re-run with updated script to convert integer literal delay arguments to
k_sleep to use the standard timeout macros.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Re-run with updated script to convert integer literal delay arguments to
k_mbox_data_block_get to use the standard timeout macros.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Added test suite which performs sanity check on instances with
fixed-top feature enabled.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added tests which verifies that:
- driver will detect when absolute alarm is set too late.
- short relative alarm is supported
- canceled alarm is not triggering user callback
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Implemented latest extensions to the counter API related to
detection of alarms being set too late and short relative alarms.
Implementation could not be realized on nrfx_rtc driver thus
driver has been reimplemented based on nrf_rtc hal.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Just housekeeping around the casting between void * arguments to
thread functions and integer types.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
And set qemu_x86_long board to build with CONFIG_SMP=y by default.
Apparently two benchmark tests - latency_measure and sys_kernel -
do not work with the SMP scheduler, so those tests are disabled.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Stops leaking very long source paths in build directories; makes them
deterministic.
Besides satisfying a CMake requirement, the new empty_file.c provide a
clue that the actual test code is not in the directory of the test case.
See https://github.com/zephyrproject-rtos/hal_nordic/pull/6 and
https://gitlab.kitware.com/cmake/cmake/issues/19475 for more details.
- Test with a simple:
sanitycheck -T $ZEPHYR_BASE/tests/subsys/settings/functional/
- Before:
CMakeFiles
├── app.dir
│ ├── HOME
│ │ └── JOHN
│ │ └── zephyrproject
│ │ └── zephyr
│ │ └── tests
│ │ └── subsys
│ │ └── settings
│ │ └── functional
│ │ └── src
│ │ └── settings_basic_test.c.obj
- After:
func_test_bindir/
├── CMakeFiles
│ └── settings_func_test.dir
│ └── settings_basic_test.c.obj
│
├── libsettings_func_test.a
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
This was a very early test and got bitrotten inside a esp32-only
whitelist. Make it run generically.
SMP must be forced off by the test (it's commonly a platform default).
Add a build-time failure when the configuration is single-CPU, for
clarity.
Filter the test likewise so it runs on all supported systems.
Also, the key argument to the CPU startup function is vestigial and
the test was being too strict by requiring it to be non-zero.
Finally, the qemu command line needs to predicate the "-smp" argument
on CONFIG_MP_NUM_CPUS and not just CONFIG_SMP so we have an extra CPU
to test against.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This test was written very early. Spinlocks are required for SMP
implementation. They couldn't be tested in terms of it, so the test
used the low level MP API instead. But of course that breaks if SMP
is actually working and the CPU is already started.
No need for that now. Just spawn a thread like any other, and filter
the test to run only on SMP systems.
Fixes#19319
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Executing the ARM thread swap test with NO_OPTIMIZATIONS
option set, leads to Idle thread stack overflow in certain
platforms. We increase the size of the Idle thread stack to
address this.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This patch is a preparatory step in enabling the MMU in
long mode; no steps are taken to implement long mode support.
We introduce struct x86_page_tables, which represents the
top-level data structure for page tables:
- For 32-bit, this will contain a four-entry page directory
pointer table (PDPT)
- For 64-bit, this will (eventually) contain a page map level 4
table (PML4)
In either case, this pointer value is what gets programmed into
CR3 to activate a set of page tables. There are extra bits in
CR3 to set for long mode, we'll get around to that later.
This abstraction will allow us to use the same APIs that work
with page tables in either mode, rather than hard-coding that
the top level data structure is a PDPT.
z_x86_mmu_validate() has been re-written to make it easier to
add another level of paging for long mode, to support 2MB
PDPT entries, and correctly validate regions which span PDPTE
entries.
Some MMU-related APIs moved out of 32-bit x86's arch.h into
mmustructs.h.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Test for bbc_microbit was failing due to RAM usage. Reduced main
stack size and turned off temperature algorithm to fit.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added test suite for clock control driver. It covers latest API update
for starting clock asynchronously and getting status.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This commit adds new k_work_poll interface. It allows to
submit given work to a workqueue automatically when one of the
watched pollable objects changes its state.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
The test creates two network interfaces, but does not set MAC
address of one of them correctly (MAC address is all zeros).
This is not good and the issue fixed in commit 9468cb6eb1
could have been revealed earlier.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Update the .yaml file of the test suite, so it enables
building and running the test for Cortex-M Baseline
architecture. Update the test README accordingly.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Some fixes to the ARM Thread Swap test:
- replace a mempcy with memset (this did not have an
effect, as we basically wanted to randomize the
callee-saved registers)
- fix two inline comments so they correspond to the
z_assert_ expressions.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We rework the arm_thread_swap test, so it can build
and run for Cortex-M Basline architecture (Cortex-M0,
Cortex-M0+, and Cortex-M23). In most cases, this rework
involved re-implementing the code blocks for storing
and loading the callee-saved registers to and from
memory. In addition, we skip the verification of
BASEPRI, and replace it with verifying PRIMASK.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This patch re-namespaces global variables and functions
that are used only within the arch/arm/ code to be
prefixed with z_arm_.
Some instances of CamelCase have been corrected.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Use the int_literal_to_timeout Coccinelle script to convert literal
integer arguments for kernel API timeout parameters to the standard
timeout value representations.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This test requires more than 32 static priorities by default, and
doesn't run with the multiq scheduler without a special configuration.
That used to be specified per-platform, but got moved to a separate
test case a while back.
This broke non-default platforms like qemu_cortex_m3 which use
SCHED_MULTIQ as their default backend. Put a filter in place instead
of going back to per-platform changes.
Fixes#19437
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Remove duplicate "tdata.timestamp" update in duration_expire; this
value is already updated by k_uptime_delta.
Besides simply removing duplicate value update, this commit also
addresses the intermittent assertion failure that is caused by
updating "tdata.timestamp" at a later time than the actual execution
of the k_uptime_delta function.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
We filter out the following kernel tests
- tickless_concept
- timer_api
from the set of tests running on QEMU Cortex-M0 platform,
as the tests consistently fail on QEMU. In addition, we
add a workaround for kernel/interrupt test, so it can
successfully execute on QEMU Cortex-M0.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Replaced net_bytes_from_str in hostname_get test by a new function that
converts the unique part of the hostname in a byte array.
net_bytes_from_str can not be used as it assumes that the string input
is of the format "xx:xx:xx:xx:xx:xx" where as the unique part of the
hostname is a MAC address string without colons. If net_bytes_from_str
is used this could result in buffer overrun on the input string.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
Application board.overlay files tend to be paired with
boards/board.conf files that extend the functionality of a board.
Move the overlay files to the same location as the config files that
they work with.
A few overlay files that are paired with a prj_board.conf file in the
application root directory are left in place.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Increased TX/RX buffer size by one in pipe test to prevent buffer
overrun.
Some test will transfer one byte more then the number of bytes
supported by the pipe, in case the buffer size is the same as the
size of the pipe this will result in a buffer overrun.
Tools such as address sanitizer would detect this overrun and fail the
test.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
Move tinycrypt related header into test and make those tests only build
on native_posix. The tests are unit tests, ie. testing tinycrypt
functionality only without any dependency on the underlying system.
Long term we should move those to be true unit tests and create
functional and integration tests that use tinycrypt in the context of
Zephyr and for real use-cases.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Disable the CONFIG_TEST_LOGGING_DEFAULTS Kconfig option which forces
immedate logging, since that is not compatible with Bluetooth and its
tests.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The main and idle threads, and their associated stacks,
were being referenced in various parts of the kernel
with no central definition. Expose these in kernel_internal.h
and namespace with z_ appropriately.
The main and idle threads were being defined statically,
with another variable exposed to contain their pointer
value. This wastes a bit of memory and isn't accessible
to user threads anyway, just expose the actual thread
objects.
Redundance MAIN_STACK_SIZE and IDLE_STACK_SIZE defines
in init.c removed, just use the Kconfigs they derive
from.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
These are renamed to z_timestamp_main and z_timestamp_idle,
and now specified in kernel_internal.h.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is part of the core kernel -> architecture interface
and is appropriately renamed z_arch_is_in_isr().
References from test cases changed to k_is_in_isr().
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Global variables related to timing information have been
renamed to be prefixed with z_arch, with naming arranged
in increasing order of specificity.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Removed unused peripheral tag and add drivers to
include test to drivers sanity check run.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This application's primary purpose is to provide some useful data to
the author of an x86 board support package for Zephyr-- it's not a
good sample. It's not a good test either, but as a test it at least
prevents regressions in multiboot/ACPI builds.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
- Kconfig test does not really need to build on all platforms
- nmi test is already in tests/arch/arm/arm_runtime_nmi
- we have plenty of tests with newlib enabled.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
just to keep same class of tests under the same umbrella, otherwise
those tests do not belong in the top level tests/ directory.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
just to keep same class of tests under the same umbrella, otherwise
those tests do not belong in the top level tests/ directory.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Mostly build tests now, will be extended to verify CTF output once we
have this feature in sanitycheck.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Integrated Settings module tests with the NVS backend. The batch of
tests is shared with other backends.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Changed the name of functional tests for NVS and FCB in the test
configuration file to avoid duplication with other test suites.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Limited the scope of helper functions that are used in the common test
source. Now it is easier to identify which functions are intended to be
used in the test suite.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Disabling SMP mode for certain tests was a one-release thing, done to
avoid having to triage every test independently (MANY are not
SMP-safe), and with the knowledge that it was probably hiding bugs in
the kernel.
Turn it on pervasively. Tests are treated with a combination of
flagging specific cases as "1cpu" where we have short-running tests
that can be independently run in an otherwise SMP environment, and via
setting CONFIG_MP_NUM_CPUS=1 where that's not possible (which still
runs the full SMP kernel config, but with only one CPU available).
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This test was testing for an undocumented and somewhat hyperspecific
behavior: when a process reaches a reschedule point and yields to a
higher priority thread, and there is another equal priority thread
active, which thread gets to run when the higher priority thread
finishes its work? The original scheduler (because it leaves the
older thread in place in the list) implements the preemption like an
interrupt and returns to the original thread, despite the fact that
this then resets is time slice quantum unfairly. In SMP mode, where
the current threads cannot live in the active list, the thread gets
added back to the end of the queue and the other thread runs. In
effect, in UP mode "yield" and "reschedule" mean very slightly
different things where in SMP they act the same.
We don't document either behavior, as it happens. Relax the test
constraints by adding a single deliberate k_yield() to unify behavior.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Port the lis2mdl sensor driver on top of the lis2mdl_StdC
HAL interface (in modules/hal/st/sensor/stmemsc/).
Signed-off-by: Armando Visconti <armando.visconti@st.com>
On most targets, application flash size for no_optimization test
configuration is slightly higher than 128 Kbytes.
Updating requirement to the next upper flash size.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
As it stands, this option leads to conflict between Newlib and POSIX
headers. (Which needs to be resolved separately.)
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
To catch more potential issues with PRs, build common kernel tests
in addition to the synchronization sample which does not run any tests.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Some modules use snprintk to format the settings keys. Unfortunately
snprintk is tied with printk which is very large for some embedded
systems.
To be able to have settings enabled without also enabling printk
support, change creation of settings key strings to use bin2hex, strlen
and strcpy instead.
A utility function to make decimal presentation of a byte value is
added as u8_to_dec in lib/os/dec.c
Add new Kconfig setting BT_SETTINGS_USE_PRINTK
Signed-off-by: Kim Sekkelund <ksek@oticon.com>
This adds support for NXP's Freedom K22 board.
Co-authored-by: Sean Nyekjaer <sean.nyekjaer@prevas.dk>
Co-authored-by: Tom Burdick <thomas.burdick@gmail.com>
Signed-off-by: Tom Burdick <thomas.burdick@gmail.com>
There is absolutely no other test in the entire codebase that hardcodes
this setting. I found no comment or any other explanation why this test
should be unique. So it really looks like just a glitch introduced when
this test was added by PR #17618 / commit f1afb4c24d.
This was discovered in three different ways:
- COVERAGE=y adds the absolute and non-deterministic source path in
.rodata sections
- it adds .gnco files in the build directory
- it makes (some) tests run 10 times slower:
qemu_x86_64 lib/fdtable/libraries.os.fdtable PASSED (qemu 2.086s)
qemu_x86_long lib/fdtable/libraries.os.fdtable PASSED (qemu 2.316s)
qemu_xtensa lib/fdtable/libraries.os.fdtable PASSED (qemu 2.033s)
mps2_an385 lib/fdtable/libraries.os.fdtable PASSED (qemu *31.286s*)
qemu_x86 lib/fdtable/libraries.os.fdtable PASSED (qemu *31.862s*)
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
This commit allows loading data from settings permanent storage
directly to the given callback function.
Signed-off-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
Platforms with limited flash are now failing to link. Add or increase
flash requirements for test cases to exclude the ones that will fail.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The commit fixes two assert expressions in the test,
which evaluate the return value of _swap(.) function
and the value of the thread's swap return variable.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We use inline assembly to store the return value of _swap(..)
function directly into r0 (in order to ensure that r4-r11
registers are not touched at this point). But we need to store
the r0 into some global memory, to retain the value until we
check it later in an assert expression, otherwise the
compiler may overwrite r0 in subsequent instructions.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Minnowboard and ACRN do not use the new APIC timer, so the
benchmark code will not run on them (yet).
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
These all currently use the HPET timer, and thus can't build with
BOOT_TIME_MEASUREMENT enabled, so disable for now. This test is
basically a build-only test, so we're covered with the other x86
targets (gpmrb, up_squared) for now.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The boot time measurement sample was giving bogus values on x86: an
assumption was made that the system timer is in sync with the CPU TSC,
which is not the case on most x86 boards.
Boot time measurements are no longer permitted unless the timer source
is the local APIC. To avoid issues of TSC scaling, the startup datum
has been forced to 0, which is in line with the ARM implementation
(which is the only other platform which supports this feature).
Cleanups along the way:
As the datum is now assumed zero, some variables are removed and
calculations simplified. The global variables involved in boot time
measurements are moved to the kernel.h header rather than being
redeclared in every place they are referenced. Since none of the
measurements actually use 64-bit precision, the samples are reduced
to 32-bit quantities.
In addition, this feature has been enabled in long mode.
Fixes: #19144
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Neither of these options is actually used; CPU_CLOCK_FREQ_MHZ appears
to have been part of x86 BOOT_TIME_MEASUREMENT at some point, and
PERFORMANCE_METRICS is the stillborn cousin of EXECUTION_BENCHMARKS.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This is bad practice and may conceal issues on platforms
not in the whitelist.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The algorithm for converting broken-down civil time to seconds in the
POSIX epoch time scale would produce undefined behavior on a toolchain
that uses a 32-bit time_t in cases where the referenced time could not
be represented exactly.
However, there are use cases in Zephyr for civil time conversions
outside the 32-bit representable range of 1901-12-13T20:45:52Z through
2038-01-19T03:14:07Z inclusive.
Add new API that specifically returns a 64-bit signed seconds count, and
revise the existing API to detect out-of-range values and convert them
to a diagnosible error.
Closes#18465
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Given the RTC is used for system clock, we need to plug its interrupt
to avoid an exception that would occur if it is left unhandled.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
The RTC on TI CC13X2/CC26X2 is a 32 KHz clock for which the minimum
compare delay is 3 ticks. When using it as the system clock, we need
to relax the upper bound to ensure the test succeeds.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
This adds support to set different permissions to CCCD so security can
be checked when enabling notification which conforms to:
BLUETOOTH CORE SPECIFICATION Version 5.1 | Vol 3, Part G page 2360:
'3.3.3.3 Client Characteristic Configuration
Authentication and authorization may be required by the server to
write the configuration descriptor.'
In addition to that also ensure that notification are not re-enabled
until the proper security level is reached to conform to the following
statement:
'10.3.1.1 Handling of GATT indications and notifications
A client “requests” a server to send indications and notifications
by appropriately configuring the server via a Client Characteristic
Configuration Descriptor. Since the configuration is persistent
across a disconnection and reconnection, security requirements must
be checked against the configuration upon a reconnection before
sending indications or notifications. When a server reconnects to a
client to send an indication or notification for which security is
required, the server shall initiate or request encryption with the
client prior to sending an indication or notification. If the client
does not have an LTK indicating that the client has lost the bond,
enabling encryption will fail.'
Fixes#17983
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Send and receive messages from message queue instead of using u32_t
stack variables to prevent stack overrun.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
Added test run with exceptions enabled.
Boards colibri_imx7d_m4, warp7_m4 and pico_pi_m4 have been excluded
from test run as they do not have sufficient ROM.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
No users of this driver after dropping quark platforms.
COUNTER_0_NAME was only defined by the QMSI driver and was defined but
not used in DTS fixup files of ateml_sam0 SoCs. Removing those leftover
defines as well.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In stack_sentinel_timer(), the timer should not be allocated on the
stack. If it gets added to the list of timeouts by k_timer_start,
then an unexpected exception may occur when the timer expires since it
may have been overwritten.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
Make sure net-shell is started properly and it does not crash.
The purpose of this test is to catch issues described in #19178
where UART was not working which was seen as net-shell crashing
at startup.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This driver was still using CONFIG_* values to determine its address,
IRQ, etc. Add a binding for an "intel,hpet" device and migrate this
driver to devicetree.
Fixes: #18657
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Suppress integer overflow warning generated by the check macros
NEG_CHECK and ROLLOVER_CHECK in intmath tests
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
A Kconfig boolean is added to allow users to provide their own
output strings when running tests via ztest.
This allows changing e.g. the PASS/FAIL/SKIPPED strings,
add counters, change separators, and similar.
A test using the feature and relevant documentation is added.
Signed-off-by: Torstein Grindvik <torstein.grindvik@nordicsemi.no>
Add support to STM IIS3DHHC the ultra-low noise, high-stability
three-axis linear accelerometer.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
The test needs to cram at least 8 messages into the log buffer, but
with 64-bit pointers only 5 fit, so make the buffer a bit bigger.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Use the INT_TO_POINTER() and companion macros to silence compiler
warnings about casting between pointers and ints of different sizes.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The CMSIS layer doesn't like large stacks, and x86 in long mode
requires large stacks, so we disable these tests for now (as was
previously done on the x86_64 port for the same reasons).
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
In long mode, x86 does not support static IDTs or OpenOCD,
so disable the tests related to these features.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
We don't allow an ifdef in ztest_test_suite because its a macro. We
usually handle this by defining multiple blocks and ifdef around them.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The LIS2MDL is not a combo device, but pure magnotemeter.
Hence, '-magn' extension is not adding information and can
be removed from dts compatible name as well as binding filename.
Instead specify '-i2c' or '-spi' to distinguish between the names.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Fatal error reporting now only dumps to the log mechanism,
so enable it in immediate mode for all tests to ensure
that fatal errors are visible and no messages are lost.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
These two tests were right at the knife edge of 16kb
on riscv64, and were not building with logging enabled
on that platform.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This test for some reason wants to validate that
k_stack_analyze() works when called from the idle thread,
but with a default idle stack size of 256 this just results
in crashes.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
System call arguments, at the arch layer, are single words. So
passing wider values requires splitting them into two registers at
call time. This gets even more complicated for values (e.g
k_timeout_t) that may have different sizes depending on configuration.
This patch adds a feature to gen_syscalls.py to detect functions with
wide arguments and automatically generates code to split/unsplit them.
Unfortunately the current scheme of Z_SYSCALL_DECLARE_* macros won't
work with functions like this, because for N arguments (our current
maximum N is 10) there are 2^N possible configurations of argument
widths. So this generates the complete functions for each handler and
wrapper, effectively doing in python what was originally done in the
preprocessor.
Another complexity is that traditional the z_hdlr_*() function for a
system call has taken the raw list of word arguments, which does not
work when some of those arguments must be 64 bit types. So instead of
using a single Z_SYSCALL_HANDLER macro, this splits the job of
z_hdlr_*() into two steps: An automatically-generated unmarshalling
function, z_mrsh_*(), which then calls a user-supplied verification
function z_vrfy_*(). The verification function is typesafe, and is a
simple C function with exactly the same argument and return signature
as the syscall impl function. It is also not responsible for
validating the pointers to the extra parameter array or a wide return
value, that code gets automatically generated.
This commit includes new vrfy/msrh handling for all syscalls invoked
during CI runs. Future commits will port the less testable code.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
After the window watchdog introduction, the boards that support it over
independent watchdog fail to pass this test. This patch adds specific
tests for the nucleo_{f401re, l496zg} boards supporting WWDG.
Signed-off-by: Ioannis Konstantelias <ikonstadel@gmail.com>
XIP support in x86 was something of a mess. This
patch does the following:
- Generic ia32 SOC no longer defines a "flash" region
as generic X86 devices don't have a microcontroller-
like concept of flash. The same has been done for apollo_lake.
- Generic ia32 and apollo_lake SOCs starts memory at 1MB.
- Generic ia32 SOC may optionally have CONFIG_XIP enabled.
The board definition must provide a flash region definition
that gets exposed as DT_PHYS_LOAD_ADDR.
- Fixed definitions for RAM/ROM source addresses in ia32's
linker.ld when XIP is turned off.
- Support for enabling XIP on apollo_lake SOC removed, there's
no use-case.
- acrn and gpmrb boards have flash and XIP related definitions
removed.
- qemu_x86 has a fake flash region added, immediately after system
RAM, for use when XIP is enabled. This used to be in the ia32 SOC.
However, the default for qemu_x86 is to now have XIP disabled.
- Fixed tests/kernel/xip to run by default on boards that enable
XIP by default, plus an additional test to exercise XIP on
qemu_x86 (which supports it but has XIP switched off by default)
The overall effect of this patch is to:
- Remove XIP configuration for SOC/boards where it does not make
any sense to have it
- Support testing XIP on qemu_x86 via tests/kernel/xip, but leave
it off by default for other tests, to ensure it doesn't bit-rot
and that the system works in both scenarios.
- XIP remains an available feature for boards that need it.
Fixes: #18956
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Make sure that resolving IPv4 address but returning IPv6 address
(and vice versa) is failing and we catch that scenario.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Got several sanity failures with this information
Assertion failed at tests/net/socket/poll/src/main.c:76: \
test_poll: (tstamp >= 30U && tstamp <= 30 + FUZZ is false)
In one of the failed tests, the tstamp was 50. Dunno what is
wrong here but in order to proceed with this, increasing the
timeout temporarily. This commit can be removed if the root
cause for this timeout is figured out.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Moving Kconfig options from testcase.yaml file to prj.conf so
that we can run the test app easily from command line and without
sanitycheck.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This has been subsumed by the new implementation in drivers/pcie.
We remove the legacy subsystem, related tests, shell module, and
outdated documentation/config references.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This was only used on the Quark SoCs. It is no longer used, can no
longer be tested, and it's reliant upon the deprecated legacy PCI
subsystem. Remove it to prevent bitrot.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Switch form using privater FCB error codes to
errno codes. FCB private codes convention were compatible
with <errno.h> codes:
- 0 mean success
- negative values mean errors
- similar error types.
There was no sense to kept private FCB error codes.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Several user mode tests cannot run on twr_ke18f because
either the platform does not have a sufficient number of
MPU regions required for the tests, or, the tests also
require HW stack protection (which has been, by default,
excluded in user mode tests for twr_ke18f board). We
excluded the board from all those tests.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit replaces several CONFIG_USERSPACE=y
settings with CONFIG_TEST_USERSPACE=y. This allows
the test sub-system Kconfig structure to control
the settings of USERSPACE and HW_STACK_PROTECTION
in the various tests suites.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This adds test for bt_uuid_create APIs using a byte array in LE/BE
format as it is expected and then proceed to compare with matching and
unmatching UUID declared in host byte order.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Extended case for testing deletion of the first entry while
it is the most recent one.
This extension allow to reproduce issue #18813 and shows that
the bugfix works well.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Make sure that the last entry added is deleted correctly by storing the
fact that one was found in a local variable.
Fix by Laczen JMS <laczenjms@gmail.com>
Fixes#18813.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
this case isn't designed for SMP, setting CONFIG_MP_NUM_CPUS=1 to
run the full SMP kernel config, but with only one CPU available.
Fixes: #12478.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
As we have re-worked the test code, and the test-case can run
on Cortex-M platforms on any available and implemented NVIC
IRQ lines, we do not need to exclude these ARM boards anymore.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit re-works the test for the ARM architecture,
so that it can work with any available NVIC IRQ, not
bound to use the last 2 NVIC lines. It makes use of
the dynamic IRQ feature.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Remove bunch of TC_PRINT's with too verbose logging of test operations.
The only logging required is in case of failures, and improve that in
a couple of cases by using zassert_*(), and log errno.
In particular, this allows to reuse existing testcase functions to
create more complex testcases.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Fix unhandled return values as most other places handled in this
file, fix coverity issue 203507.
Fixes: #18445.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Fix unhandled return values as most other places handled in this
file, fix coverity issue 203454.
Fixes: #18443.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Rename bt_conn_security to bt_conn_set_security, this makes the API
naming more consistent.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Rename security level enum, using level and number instead of low,
medium, high and fips.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
We need to increase the stack size of the main thread, to
avoid stack overflow, when executing the tests on various
platforms.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
A second semaphore is used for the second trickle timer, so that if the
first timer expires twice before the second one, the test would still
wait before proceeding to check on cb_2_called.
Fixes#18598.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
The commit fixes the way we determine an available
NVIC IRQ line to perform the zero-latency IRQ test.
The test can now run properly on SOCs that do not
have a continous set of implemented NVIC IRQ lines.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The test assumes that storage is clear before it runs. This
might be not true as lot of devices are only partially erased by
'west flash'.
Patch introduce procedure for testing whether test runs the first
time and clear storage if so.
The procedure uses mark which is stored inside SoC embedded program
flash. It will not work one devices on which read/write to it is
impossible.
fixes#16463
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Nordic platforms measure ticks in cycles of a 32 KiHz clock for which
the minimum compare delay is 2 ticks. The test assumed an upper bound
of four ticks delay per loop iteration, resulting from alignment at
various layers. This delay is met on Nordic for tick rates at or below
16384, but is too short for the default 32768 Hz tick rate.
Instrumentation confirms that the usleep test loop body on Nordic at 32
KiHz ticks takes 3 ticks as the optimum delay, only when a debug probe
is active. In other circumstances it can take either 5 or 6 ticks,
depending on timer alignment and stability.
Relax the upper bound for platforms using this system timer at the
highest rate.
Closes#17965.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Platforms which use the GEN_SW_ISR mechanism for interrupt handling
can make use of a really simple whitebox trick for verifying that it
worked (i.e. that the pointer and argument get placed in the table
correctly).
Easy and simple way to get some coverage for dynamic IRQs, which is
currently entirely missing. Long term we'll want to replace this with
a test that uses the API directly and chooses an arch-specific vector
to set, and triggers it using arch-specific code, but that's quite a
bit more effort and for now we need to land patches to
z_irq_connect_dynamic() which show test coverage.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This removes the necessity of registering the storage for CCC and make
it part of the declaration itself.
Fixes#18547
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
An inverted comparison typo led to the final loop in the sflist being
skipped. Fix so that it actually runs.
(Odd that it took a static analysis tool to detect this, the loop
expressions are all constants, I'm surprised gcc didn't see it while
doing unrolling analysis).
Fixes#18437
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Can't use a volatile variable in something that the tool thinks is an
optional assert, because the read is treated as a side effect.
Fixes#18438Fixes#18439
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
We were testing the value of a volatile variable inside a zassert,
which static analysis doesn't like. In principle, it might be
volatile because it's an MMIO register or something and the read is a
side effect, and an assertion will be optionally compiled. (Except
here the value is just regular memory marked volatile for
threadsafety, and zassert will never be elided in a test, but the tool
doesn't know that).
Refactor a little so we always read the variable in a way the tool can
detect is consistent.
Fixes#18446
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
It's shorter and may get rid of false Coverity positives 203489 and
203498 and fix#18424 and duplicate #18425.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Confirms build (and run) of C++17 applications that make use of STL
containers and other features.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Add test for check whether deleted entry is recognized properly
after settings reload.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
This fixes the coverity problem which which in fact is a non-issue as
the code would assert before reaching that line which makes the NULL
pointer check useless so this removes it.
Fixes#18431
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Fix ASSERT expressions with volatile variables in
arch/arm/arm_thread_swap test suite.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Fix a memset function call so the sizeof() argument is
evaluated using the appropriate struct type.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Fix ASSERT expression with volatile test variables
in arch/arm/arm_ramfunc test suite. Fix, also, an
logical expression in an if-statement in the test.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Fix expressions with volatile variables in ASSERT
statements in arch/arm/arm_zero_latency_irq test
suite.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Closes#18392 by asserting and returning an error if the block size is
not positive.
Closes#18458. The diagnosis here was not relevant as an in-range EOS
is written before the buffer is used, but using the non-terminated
length is slightly more clear about intent and may avoid a read overrun
of the mount point.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
No test verifies a TX callback for successful transfers.
This commit adds a test for those callbacks.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Apparently the tests/lib/sprintf test requires more than 34kB
of code size, when building in MCIMX7_M4-based platforms. Such
platforms, however, only have 32kB of code memory, therefore,
we exclude them from this test.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
CONFIG_MAIN_STACK_SIZE was originally 1344 in this test. The following
commit removed setting the stack size in the test:
commit 7b3cd7d371
Author: Cami Carballo <cami.carballo@intel.com>
Date: Fri Jul 26 10:59:16 2019 -0400
tests: net: increase stack size
However getting the default stack size on FRDM-K64F of 512 causes the
following panic:
FATAL: ***** BUS FAULT *****
FATAL: Stacking error
FATAL: Imprecise data bus error
FATAL: NXP MPU error, port 3
FATAL: Mode: Supervisor, Data Address: 0x20002ff0
FATAL: Type: Write, Master: 0, Regions: 0x8200
FATAL: r0/a1: 0x00000000 r1/a2: 0x00000000 r2/a3: 0x00000000
FATAL: r3/a4: 0x00000000 r12/ip: 0x00000000 r14/lr: 0x00000000
FATAL: xpsr: 0x200002f4
FATAL: Faulting instruction address (r15/pc): 0x00000000
FATAL: >>> ZEPHYR FATAL ERROR 2: Stack overflow
FATAL: Current thread: 0x2000182c (main)
FATAL: Halting system
Bump stack back to original 1344 fixes the issue.
Fixes#18292
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The sys_mutex test doesn't seem to fit in 24kB of RAM anymore,
when building with user mode support (CONFIG_USERSPACE=y). We,
therefore, restrict it to platforms that have 32KB or more of
RAM. We also filter the test with ARCH_HAS_USERSPACE explicitly.
The alternative setup of the sys_mutex test, i.e. without user
mode support (CONFIG_TEST_USERSPACE=n) continues to build for
platforms with less than 32k of RAM.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
We are trying to pass 64-bit value to the driver, but we only
allocate space for an integer. This will not work and will cause
invalid memory access.
Fixes#18205
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The mcux pwm drivers use period cycles as a divisor to calculate the pwm
frequency in hertz. This operation can underflow easily with large
values of period cycles relative to the pwm clock source, causing the
driver to return an error code and the pwm_api test to fail.
Updates the test to use the smaller set of period and pulse cycles on
k64-based boards, fixing the test for frdm_k64f and hexiwear_k64 boards.
The test is not changed for i.mx rt boards because the pwm clock source
on these boards is much faster than on k64 boards, and thus the same pwm
frequency operation does not underflow.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Disable controller filtering feature not used on mesh stack.
This reduces some RAM usage.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add shell commands to add and remove devices from the shell.
Add commands and options to use whitelist for advertising, scanning,
and creating connections.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This emulates a RISC-V in 64-bit mode on a SiFive FE310 dev board.
Memory is tight so a few tests had to be disabled due to the extra
memory usage compared to qemu_riscv32.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Add new tests that make sure that sendmsg() works when using
connected UDP socket and when not setting msghdr destination
address.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit includes tweaks in several tests, so
that the tests can be passing on ARM QEMU targets,
mps2_an385 and mps2_an521 with Qemu 4.x release.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Added tests of flash driver compatibility with fcb-backend.
For flash drivers which support write-block-size bigger than 1 B
test of unaligned data access uses native write-block-size
as it is dedicated to check whether settings works well on platform
which has 1 B access which is native on the current DUT.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
This is no longer needed after using
zephyr_interface_library_named cmake directive in the POSIX subsys
source itself.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This commit is an implementation of 6LoCAN, a 6Lo adaption layer for
Controller Area Networks. 6LoCAN is not yet standardised.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Rename the socket_can implementation from CANBUS to CANBUS_RAW.
This is a preperation for 6LoCAN which is a CANBUS L2 for IPv6.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Added test for check behavior on deleting existent entry,
nonexistent entry and already deleted entry.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Added test for check wheter initialization works well when nvs
storage is full filled. Test also check weheter can delet any
entry from full filled NVS.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
This will handle BTP Discover All Primary Services command.
Related TC: GATT/CL/GAD/BV-01-C
Fixes: #17861
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
- k_sys_fatal_error_handler() can return on all platforms,
indicating that the faulting thread should be aborted.
- Hang the system for unexpected faults instead of trying
to keep going, we have no idea whether the system is even
runnable.
Prevents infinite crash loops during tests.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
There's desire to be able to customize parameters on a per-filesystem
basis, which means we need a way to override the Kconfig defaults which
are global. This also means the littlefs data structure cannot own the
cache and lookahead buffers.
Switch to using a macro to define the littlefs data structure. The
default version uses the Kconfig constants. A custom one takes
arguments providing the most likely partition-specific parameters.
Finally the user is free to bypass the helper macros and set any
parameters desired, though validation is limited and only present when
CONFIG_DEBUG is enabled.
Extend the test suite with a performance module, which confirms that
these settings have an impact proportional to the log of changes to the
cache or IO sizes.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Existing file system implementations do not provide the special "."
(current) and ".." (parent) directory entries in the readdir results.
littlefs does.
Remove these entries in the abstraction layer. This simplifies code in
higher level consumers that aren't prepared to see them. Consumers like
FUSE that need them can put them back without having to worry about
conflicts.
Closes issue #17951
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Add a new test for unlocking nested scheduler lock. Make sure that
k_sched_unlock() isn't unconditionally a preemption point.
Signed-off-by: Yasushi SHOJI <y-shoji@ispace-inc.com>
Add SPI support for stm32mp157c_dk2 board. If SPI is selected, SPI4
(Arduino connector compatible SPI) and SPI5 (on front 2x20 GPIO
expander) will be enable by default on stm32mp157c_dk2 board.
Signed-off-by: Yaël Boutreux <yael.boutreux@st.com>
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
An issue was seen after changes introduced in #17933.
The net_context callback was run after we checked that it
was run ok. This test failed of course in that case. Simple
solution is to k_yield() which will make sure that the
callback gets called before we continue. This works for this
test as our threads have suitably selected priorities.
There is also no need to use K_NO_WAIT here so replacing the
timeout with K_FOREVER.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Previously, context switching on x86 with memory protection
enabled involved walking the page tables, de-configuring all
the partitions in the outgoing thread's memory domain, and
then configuring all the partitions in the incoming thread's
domain, on a global set of page tables.
We now have a much faster design. Each thread has reserved in
its stack object a number of pages to store page directories
and page tables pertaining to the system RAM area. Each
thread also has a toplevel PDPT which is configured to use
the per-thread tables for system RAM, and the global tables
for the rest of the address space.
The result of this is on context switch, at most we just have
to update the CR3 register to the incoming thread's PDPT.
The x86_mmu_api test was making too many assumptions and has
been adjusted to work with the new design.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Error codes are listed in header files and in the core spec as hex
values. Always print them in hex in debug for easier error code
checking.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
With the upcoming riscv64 support, it is best to use "riscv" as the
subdirectory name and common symbols as riscv32 and riscv64 support
code is almost identical. Then later decide whether 32-bit or 64-bit
compilation is wanted.
Redirects for the web documentation are also included.
Then zephyrbot complained about this:
"
New files added that are not covered in CODEOWNERS:
dts/riscv/microsemi-miv.dtsi
dts/riscv/riscv32-fe310.dtsi
Please add one or more entries in the CODEOWNERS file to cover
those files
"
So I assigned them to those who created them. Feel free to readjust
as necessary.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Commit ee4c23cc1f ("CMSIS v2: Work around time unit confusion")
enforced CONFIG_SYS_CLOCK_TICKS_PER_SEC=1000 on this test, but the
m2gl025_miv platform has some issues with it. Let's exclude it for now.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Commit 33c64c2578 ("tests/cmsis_rtos_v1: Correct timing assumptions")
introduced a stricter criteria where time spent has to match the clock
within 1% discrepancy. It is zassert_true(diff < max && diff > min)
meaning _less than_ 1%.
The test uses a 1-second delay. When SYS_CLOCK_TICKS_PER_SEC=100 that
means a single tick discrepancy would overflow the test.
Let's be inclusive and allow up to 1% instead. That allows for this
test to pass on m2gl025_miv when using 100 ticks per sec.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
These functions are useful for determining prefixes, as with file system
paths. They are required by littlefs.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
struct tm has fields that were not being set by the implementation,
causing the test to fail when the uninitialized values were compared
with a static initialized result. Zero the structure before filling it.
Closes#17794
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
We generated a define for each instance to convey its existance of the
form:
#define DT_<COMPAT>_<INSTANCE> 1
However we renamed all other instance defines to be of the form
DT_INST_<INSTANCE>_<FOO>. To make things consistent we now generate a
define of the form:
#define DT_INST_<INSTANCE>_<COMPAT> 1
We also now deprecate the DT_<COMPAT>_<INSTANCE> form and fixup all uses
to use the new form.
Fixes: #17650
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit is a hotfix. It makes sanitycheck happy by fixing
the way we can temporarily exclude some tests in the userspace
test suite for the ARC architecture.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This board and SoC was discontinued some time ago and is currently not
maintained in the zephyr tree.
Remove all associated configurations and variants from the tree.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This board and SoC was discontinued some time ago and is currently not
maintained in the zephyr tree.
Remove all associated configurations and variants from the tree.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This board and SoC was discontinued some time ago and is currently not
maintained in the zephyr tree.
Remove all associated configurations and variants from the tree.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
User mode should be able to successfully induce a kernel
oops, or stack check fail fatal error. The latter is
required by compiler stack canaries.
User mode should not be able to induce a kernel panic, or
fake some other kind of exception.
Currently supported on ARM and x86 platforms.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
These additional configs should have been put in prj.conf
and not here. Makes the tests simpler to build correctly
outside of sanitycheck.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is now called z_arch_esf_t, conforming to our naming
convention.
This needs to remain a typedef due to how our offset generation
header mechanism works.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
* z_NanoFatalErrorHandler() is now moved to common kernel code
and renamed z_fatal_error(). Arches dump arch-specific info
before calling.
* z_SysFatalErrorHandler() is now moved to common kernel code
and renamed k_sys_fatal_error_handler(). It is now much simpler;
the default policy is simply to lock interrupts and halt the system.
If an implementation of this function returns, then the currently
running thread is aborted.
* New arch-specific APIs introduced:
- z_arch_system_halt() simply powers off or halts the system.
* We now have a standard set of fatal exception reason codes,
namespaced under K_ERR_*
* CONFIG_SIMPLE_FATAL_ERROR_HANDLER deleted
* LOG_PANIC() calls moved to k_sys_fatal_error_handler()
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Per POSIX, open() is defined in <fcntl.h>. fcntl.h in turn comes from
the underlying libc, either newlib, or minimal libc.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The testcases are adapted to handle more than one net buffer in
a net_pkt. After the IPHC optimization it is possible that IP header
is not in the same buffer than the UDP header.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
The test assumes that the settings area is empty. This happens
naturally when the area is in the SOC flash and the chip flash is
entirely erased when the test is programmed. The test will fail if the
programmed board is reset and the test run again.
The test cannot pass by reprogramming when the storage area is in an
external flash device.
Make things repeatable for FCB by erasing the storage partition before
running the test.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
On some SoCs the frequency of the system clock is obtained at run time
as the exact configuration of the hardware is not known at compile time.
On such platforms using CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC define
directly introduces timing errors.
This commit replaces CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC by the call
to inline function sys_clock_hw_cycles_per_sec() which always returns
correct frequency of the system clock.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Make sure that SO_TXTIME socket option can be set and get.
Verify also that TX time is passed properly to network device
driver.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Existing test checking value returned by k_delayed_work_remaining_get()
verified two cases:
1) The k_delayed_work_remaining_get() should return 0 for non-submitted
work.
2) The k_delayed_work_remaining_get() should return value greater or
equal to the timeout value of just submitted work.
Unfortunately, the second check is not correct. The value returned
by the k_delayed_work_remaining_get() just after submitting delayed
work should be:
- Equal to timeout of the submitted work if no timer interrupt was
executed between submitting work and checking remaining time.
OR
- Less than timeout of the submitted work if a timer interrupt was
executed between submitting work and checking remaining time.
This commit changes the test accordingly taking under account the
error caused by back and forth conversion between ms and ticks.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Rename the controller Kconfig option BT_LL_SW to
BT_LL_SW_LEGACY in preparation towards switch to new Link
Layer implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This changes RPA timeout so that the address is changed every 60
seconds. This change is needed to speed up privacy related test cases.
Currently, the new RPA was initiated on request that was a bit hackish
and could be done via BT_RPA_TIMEOUT Kconfig option.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This commit make the float_disable test suite more robust
for fast CPUs, by replacing k_sleep(1) with k_yield(), as
the mechanism to trigger thread swap-out during the test
execution. In the wake of using k_yield(), the test, now,
fixes the priorities of all testing threads to 0, making
the test behavior more deterministic with respect to
thread scheduling. The patch doesn't change the functional
behavior of the test.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This updates tester application to recent changes in BTP related
to Connection Parameters Update.
Connected event has been extended with connection parameters.
Connection Parameters Update command and event have beend added to
initiate and track current connection parameters.
Needed to automate qualification test GAP/CONN/CPUP/BV-06-C
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This enables support for GAP writable device name in tester application
for testing purposes.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Flash size calculation was don with assumption that flash page size
is always 1 KB and flash size was parameterized with such granularity.
This patch correct this bug.
Flash pages number under statistic can't be calculated via preprocessor
anymore - thus are parameterized via Kconfig.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
It Need to start using DT_FLASH_SIM_xxx labels after sim_flash was
un-chosen as zephyr,flash.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Stack canaries require that the z_libc_partition be added to
the memory domain, otherwise user thread access to the
stack canary value will result in an MPU/MMU fault.
These tests define their own domains to test specific userspace
features. Adding another partition to them would be invasive,
would potentially break some platforms with a limited number
of MPU regions, and these tests are not designed to validate
stack canaries anyway, we have other tests for that.
Fixes: #17595
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This verifies gmtime and timeutil_timegm against each other and
reference data for a wide range of instances.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
This reverts commit 755cc644cc.
This approach is problematic in several ways. First, `intptr_t` could
cause undefined behavior in the subtraction when the pointer converts to
a negative value. Except in weird cases where the sign of the pointer
identifies a memory domain (like kernel vs userspace) I'm unaware of any
valid use of `intptr_t`.
Second, this macro was created to address a special need that cannot
rely on defined behavior: i.e. to ensure that data definitions are
placed in contiguous space and access is provided through linker-defined
symbols, for which the language required alignment and continuity is not
guaranteed.
A macro that calculates the span between linker symbols has very
different semantics than one that calculates the difference between
pointers. Replace the global PTR_DIFF with a documented local macro
that tests what's necessary without risking integer overflow.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Move duplicate hex2bin and add bin2hex function so that application can
use the functions and avoid code duplication.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The space or plus prefix must appear when requested even with INF and
NAN. And no zero-padding in that case.
Also, 0.0 and -0.0 are distinct values. It is necessary to display
the minus sign with a negative zero.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
The precision parameter to the %g conversion indicates the maximum
number of significant digits and not the number of digits to appear
after the radix character. Here's a few examples this patch fixes:
expected before
----------------------------------------------------------
printf("%.3g", 150.12) 150 150.12
printf("%.2g", 150.1) 1.5e+02 150.1
printf("%#.3g", 150.) 150. 150.000
printf("%#.2g", 15e-5) 0.00015 0.00
printf("%#.4g", 1505e-7) 0.0001505 0.0002
printf("%#.4g", 1505e-8) 1.505e-05 1.5050e-05
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
The on-stack work buffer occupies 201 bytes by default. Now that we've
made the code able to cope with virtually unlimited width and precision
values, we can reduce stack usage to its strict minimum i.e. 25 bytes.
This allows for some additional sprintf tests exercizing wide results.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
The z_prf() function currently allocates a 200-byte buffer on the
stack to copy strings into, and then perform left/right alignment
and padding. Not only this is a pretty large chunk of stack usage,
but this imposes limitations on field width and string length. Also
the string is copied not only once but _thrice_ making this code
less than optimal.
Let's rework the code to get rid of both the field width limit and
string length limit, as well as the two extra memory copy instances.
While at it, let's fixes printf("%08s", "abcd") which used to
produce "0000abcd".
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
We add a test-case for arch/arm/thread_swap, so the
test is executed with CONFIG_FLOAT/CONFIG_FP_SHARING
being enabled, if an FPU is available. We execute the
test extension with/without enabling compiler optimizations.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit contributes a test for the ARM swap, i.e. the
context-switch mechanism for the ARM architecture. The test
verifies that the thread state variables are set and checked
properly when performing a thread swap-out and swap-in.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Let's use the PTR_DIFF() helper which performs pointer difference in a
64-bit compatible way, and use %zu for printing sizeof() results.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Remove whitelisting and make the test more generic. This test was only
building on 1 board basically, now with the new filters it builds on 24.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Remove whitelisting and enable broader testing on all boards with needed
features.
Add pwm to board yaml where it applies.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The size_t type is either compatible with an int on 32-bit target, or
a long on 64-bit targets. It could even be a long even on some 32-bit
targets. Let's use the z qualifier in the printf format to be compatible
with whatever flavor in use.
In case of pointers, let's just use %p with pointers directly and
avoid casts altogether.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
In SAM SoCs Watchdog is selected by default and runs
with some default configuration, unless the build sets
CONFIG_WDT_DISABLE_AT_BOOT. As the tests/kernel/critical
takes relatively large amount of time to complete, the
watchdog (that is never fed in the test) will eventually
trigger a reset. As a result the test keeps restarting
continuously and never completes. We want to run the
test on SAM SoCs, so we do the following:
- filter our the SAM SoCs with the SAM WDT from the
default build
- introduce an alternative test-case for these SoCs
with the additional CONFIG_WDT_DISABLE_AT_BOOT
option set.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
uint8_array values are now generated as structure initializers. Update
the code accordingly. The implementation assumes that existing
devicetree source does not provide the correct OUI so preserves the
in-driver override of the value provided by devicetree.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
This commit moves the BLE GATT heart rate service from
samples/bluetooth/gatt to subsys/bluetooth/services and adds a Kconfig
entry to enable and configure the service.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This commit moves the BLE GATT Battery service
from /samples/bluetooth/gatt to /subsys/bluetooth/services and
adds a Kconfig entry to enable and configure the service;
when enabled, it will register itself automatically.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This fixes the following error:
passing argument 5 of ‘fsutil_read_file’ from incompatible pointer type
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This commit contributes the basic testing for
k_float_disable() API, for ARM and x86 ARCHes.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Make fp_sharing a 'parent' test suite directory, and
rename the original fp_sharing test into
tests/kernel/fp_sharing/generic. In this
way more FP-related tests can be grouped
together in the same test directory.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Noticed this error print when running in mps2_an385 platform.
<err> net_if: There is no network interface to work with!
Adding CONFIG_NET_LOOPBACK=y removes this error. After this
the CONFIG_NET_IPV6_MLD=n needed to be added in order to avoid
crashes when IPv6 MLD is done which is not needed for this test.
Removed also the whitelisting as that is not really needed and
we want to run these in as many platforms as possible.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Flags in alarm configuration structure will allow further extention
without breaking API. Initially, existing absolute flag was added
as the only flag.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The special 'unittest' target has largely been supersesed by
native_posix, and converting this to a regular test will allow
us to see code coverage for the CRC functions in our coverage
reports.
Fixes: #16943
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Forced attempt to set the device address is unpredictable
and also should not be done during testing.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
We need to increase the stack sizes if user enables CONFIG_COVERAGE
option. You can test this by this command
sanitycheck --coverage -p qemu_x86 -T tests/net/udp \
-T tests/net/mgmt -T tests/net/mld
This is partial fix for issues described in #17323
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the socket descriptor is invalid (fd < 0), there is no
need to try to close it.
Coverity-CID: 198949
Fixes#16785
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is testing size_mul_overflow() in z_impl_k_msgq_alloc_init() so
make sure OVERFLOW_SIZE_MSG is large enough even on 64-bit targets.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
... because this test does use userspace, as seen in the source or
demonstrated by the failure of this command:
sanitycheck --extra-args=CONFIG_TEST_USERSPACE=n
See commit message of 4afcc0f8af for the long story.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
sizeof(value) returns the size of the pointer, not the pointed string.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
tests/bluetooth/gatt/src/main.c
Over time, this has been reduced to a few functions dealing solely
with floating-point support, referenced only from core/ia32/float.c.
Thus they are moved into that file and the header is eliminated.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The accounting data stored at the beginning of a memory block used by
malloc must push the returned memory address to a word boundary. This
is already the case on 32-bit systems, but not on 64-bit systems where
e.g. struct k_mem_block_id still has a size of 4.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Add support to STM LSM6DSO 6-axis IMU sensor driver.
This driver supports communication with device though both
I2C and SPI bus and both polling and drdy trigger mode.
This driver supports also the sensorhub mode with the possibility
to connect a maximum of two external devices, typically a
magnetometer and an environmental sensor, currently selected among
following devices: lis2mdl magnetometer, lps22hh or lps22hb
pressure and temperature sensors, HTS221 humidity sensor.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Add support to STM LPS22HH pressure and temperature sensor.
The driver support I2C and SPI bus communication and both
polling and drdy trigger mode.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
This was dumping coverage before the test code even ran.
Ideally, this gets re-written to use ztest, but meanwhile
place a dummy main thread which sleeps forever, and dump
coverage once the test succeeds.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Adds coverage for the uncovered json_calc_encoded_len()
and covers a bunch more error cases.
This gets us up to 90.1% line coverage and 100% function
coverage.
Fixes: #16944
Partial fix for: #16011
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The current CMSIS v2 implementation is clearly assuming that timeout
arguments being passed to e.g. osDelay() are in units of Zephyr ticks,
not milliseconds as specified by ARM or (inconsistently) assumed by
our test code.
Most tests work with the ~100 Hz default tick rate, but they tend to
fail on precision issues at higher tick rates. Force the CMSIS v2
applications to be 1000 Hz for now as a workaround, and detect the
mismatch as a build failure.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This test was written to assume that k_busy_wait() and CMSIS
osKernelSysTick() (which is just k_cycle_get_32()) were perfectly
synchronized. On nRF, they aren't (one is the 32 kHz RTC timer, the
other is a calibrated spin loop using the CPU frequency).
When ticks were being reported at 100 Hz granularity, there wasn't
enough precision to detect the mismatch. Now there is. Rework the
test to require that the clocks match to within 1%.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This test seems a little confused. It does a POSIX usleep() for 90ms,
then checks the time taken, and verifies that it was no less
than... 91ms!
On existing platforms, tick alignment makes sure that we always take a
little longer, so this passes. But on high tick rate configurations we
get it exactly right. And fail.
Adjust the calibration to allow (exactly) 90ms sleeps. Also fixed a
comment that described the wrong units.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This test was written to properly align its millisecond-measured wait
time and assumed that there would be no other overhead. In fact on
fast tick rate systems (or even ones where the alignment computation
doesn't provide the needed padding as "slop") that's not quite enough
time to complete the full test. There are cycles between the sleep
calls that need to be accounted for, and aren't.
Just give it one extra work item of time before failing. We aren't
testing work queue timing precision here, just evaluation semantics.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
"50" ticks is fine with 100 Hz timer precision but way too short to
survive the conversion to milliseconds on fast, non-decimal tick
rates. Make it half a second, which was the original intent.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This test was written to assume ~100 Hz ticks in ways that are
difficult to fix. It wants to sleep for periods on the order of the
TICKLESS_IDLE_THRESH kconfig, which is extremely small on high tick
rate systems and (on nRF in particular) does not have a cleanly
divisible representation in milliseconds.
Fixing precision issues by cranking the idle threshold up on a
per-system basis seems like an abuse, as that is what we want to be
testing in the first place. Just let the test run at the tick rate it
has always expected.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The logic about minimal sleep sizes due to "tick" aliasing was
correct, but drivers also have similar behavior with "cycle" aliasing
too. When cycles are 3-4 orders of magnitude faster than ticks, it's
undetectable noise. But now on nRF they're exactly the same and we
need to correct for that, essentially doubling the number of ticks a
usleep() might wait for.
The logic here was simply too strict, basically. Fast tick rates
can't guarantee what the test promised.
Note that this relaxes the test bounds on the other side of the
equation too: it's no longer an error to usleep() for only one tick
(i.e. an improved sleep/timeout implementation no longer gets detected
as a test failure).
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The sleep test was checking that the sleep took no longer than "2
ticks" longer than requested. But "2 ticks" for fast tick rate
configurations can be "zero ms", and for aliasing reasons it's always
possible to delay for 1 unit more than requested (becuase you can
cross a millisecond/tick/whatever boundary in your own code on either
side of the sleep). So that "slop" value needs to be no less than
1ms.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The test for the k_uptime_delta utilities was calling it in a loop and
waiting for the uptime to advance. But the code was specifically
wanting it to advance 5ms or more at one go, which clearly isn't going
to work for a tick rate above 200 Hz.
The weird thing is that the test knew this and even commented about
the limitation. Which seems silly: it's perfectly fine for the clock
to advance just a single millisecond. That's correct behavior too.
Let's test for that, and it will work everywhere.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
When ticks are sub-millisecond, the math produces minimum and maximum
values for the slice duration test that are equal. But because of
aliasing across tick boundaries, it's always possible (for any time
period, nothing specific to time slicing here) to measure one tick
more than an intended duration. So make sure there's always at least
a range of 1ms.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Tick rate is becoming a platform tunable in the tickless world. Some
apps were setting it due to requirements of drivers or subsystems (or
sometimes for reasons that don't make much sense), but the dependency
goes the other way around now: board/soc/arch level code is
responsible for setting tick rates that work with their devices.
A few tests still use hard-configured tick rates, as they have
baked-in assumptions (like e.g. "a tick will be longer than a
millisecond") that need to be addressed first.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This code was clearly written to assume that the timeout argument to
k_mem_pool_alloc() was in ticks and not ms. Adjust to what appears to
have been the intent. It was working as intended (i.e waiting one or
1/10th of a second) only on systems where the default tick rate was
100 Hz.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
If maxsize is smaller than _MPOOL_MINBLK, then Z_MPOOL_LVLS() will be 0.
That means the loop in z_sys_mem_pool_base_init() that initializes the
block free list for the nonexistent level 0 will corrupt whatever memory
at the location the zero-sized struct sys_mem_pool_lvl array was
located. And the corruption happens to be done with a perfectly legit
memory pool block address which makes for really nasty bugs to solve.
This is more likely on 64-bit systems due to _MPOOL_MINBLK being twice
the size of 32-bit systems.
Let's prevent that with a build-time assertion on maxsize when defining
a memory pool, and adjust the affected test accordingly.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This header is currently IA32-specific, so move it into the subarch
directory and update references to it.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Making room for the Intel64 subarch in this tree. This header is
32-bit specific and so it's relocated, and references rewritten
to find it in its new location.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This file is 32-bit specific, so it is moved into the ia32/ directory
and references to it are updated accordingly.
Also, SP_ARG* definitions are no longer used, so they are removed.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Check return value of net_if_ipv6_get_ll() before accessing it.
Coverity-CID: 199437
Fixes#17201
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This mechanism had multiple problems:
- Missing parameter documentation strings.
- Multiple calls to k_thread_name_set() from user
mode would leak memory, since the copied string was never
freed
- k_thread_name_get() returns memory to user mode
with no guarantees on whether user mode can actually
read it; in the case where the string was in thread
resource pool memory (which happens when k_thread_name_set()
is called from user mode) it would never be readable.
- There was no test case coverage for these functions
from user mode.
To properly fix this, thread objects now have a buffer region
reserved specifically for the thread name. Setting the thread
name copies the string into the buffer. Getting the thread name
with k_thread_name_get() still returns a pointer, but the
system call has been removed. A new API k_thread_name_copy()
is introduced to copy the thread name into a destination buffer,
and a system call has been provided for that instead.
We now have full test case coverge for these APIs in both user
and supervisor mode.
Some of the code has been cleaned up to place system call
handler functions in proximity with their implementations.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This test uses ztest, there is no need to set this and it
was breaking builds with CONFIG_COVERAGE=y
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Test AF_NET_MGMT API getsockopt() and setsockopt() functions that
they work properly when called from kernel or from userspace.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add unit tests to net_addr_ntop() and net_addr_pton() in order to
verify that the functions can be called from userspace.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The info parameter is difficult to use if the caller does not
get information how long the info struct is. So add info_length
parameter to net_mgmt_event_wait_on_iface() and
net_mgmt_event_wait() APIs.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
HW stack protection in ARMv8-M is implemented by default
with the built-in stack guard mechanism. Therefore, by
default all tests for ARMv8-M will use the built-in stack
overflow mechanism (CONFIG_BUILTIN_STACK_GUARD is set in
tests). However, we would like have some coverage on the
MPU stack guard mechanism for ARMv8-M. The added test case
manually disables BUILTIN_STACK_GUARD and enables the
MPU_STACK_GUARD option, to provide that test coverage.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
CONFIG_TEST_HW_STACK_PROTECTION is set by default in tests,
and that one selects HW_STACK_PROTECTION option. Therefore,
we do not need to set that one explicitly in the test project
configuration files. We clean up some redundant occurrences of
CONFIG_HW_STACK_PROTECTION=y from the tree.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
sflists have a couple APIs related to sfnodes that aren't
present for slists. There were uncovered, write some tests
for them.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We were testing all the slist APIs, but not the sflist
variant. Make a copy of the slist tests for sflist,
with the names properly changed.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Some of the slist APIs were only being indirectly exercised;
add to the slist test case to cover everything explicitly.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
There's no need for a system call for this; futexes live in
user memory and the initialization bit is ignored.
It's sufficient to just do an atomic_set().
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Introduce a separate buffer pool for events which the HCI driver
considers discardable. Examples of such events could be e.g.
Advertising Reports. The benefit of having such a pool means that the
if there is a heavy inflow of such events it will not cause the
allocation for other critical events to block and may even eliminate
deadlocks in some cases.
Also update all mesh samples not to specify explicit RX buffer counts
anymore. Instead, create appropriate defaults in Kconfig so that we
only need to override this in the app for cases like the bbc:microbit
with limited memory.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This event is a priority one, so it's not safe to have it use the RX
buffer pool which may be depleted due to non-priority events (e.g.
advertising events). Since the event is consumed synchronously it's
safe to have a single-buffer pool for it. Also introduce a new
bt_buf_get_evt() API for HCI drivers to simplify the driver-side code,
this effectively also deprecates bt_buf_get_cmd_complete() which now
has no in-tree HCI driver users anymore.
Fixes#16864
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Allow application to call net_if_ipv4_set_gw_by_index()
and set the gateway if enabled by configuration.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allow application to call net_if_ipv4_set_netmask_by_index()
and set the netmask if enabled by configuration.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We use the following commands to rename any
SW._GPIO_{CONTROLLER,PIN,FLAGS} to
DT_ALIAS_SW._GPIOS_{CONTROLLER,PIN,FLAGS}
git grep -l SW._GPIO_CONTROLLER | xargs sed -i 's/SW\(.\)_GPIO_CONTROLLER/DT_ALIAS_SW\1_GPIOS_CONTROLLER/g'
git grep -l SW._GPIO_PIN | xargs sed -i 's/SW\(.\)_GPIO_PIN/DT_ALIAS_SW\1_GPIOS_PIN/g'
git grep -l SW._GPIO_FLAGS | xargs sed -i 's/SW\(.\)_GPIO_FLAGS/DT_ALIAS_SW\1_GPIOS_FLAGS/g'
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Needed an explicit test for this function for code
coverage purposes; we were relying indirectly on
other code using it.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Error cases weren't being tested; bring up coverage for
kernel/futex.c up to 100% file/function/branch.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
No test was exercising the k_usleep() system call, run
the test case as a user thread to fix code coverage.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Test error cases and alternative implementation to bring code
coverage up to 100% file / 100% line.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
move misc/reboot.h to power/reboot.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/stack.h to debug/stack.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/util.h to sys/util.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/slist.h to sys/slist.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/rb.h to sys/rb.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/printk.h to sys/printk.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/mutex.h to sys/mutex.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/mempool.h to sys/mempool.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/math_extras.h to sys/math_extras.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/dlist.h to sys/dlist.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/byteorder.h to sys/byteorder.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/__assert.h to sys/__assert.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move ring_buffer.h to sys/ring_buffer.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move uart.h to drivers/uart.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move spi.h to drivers/spi.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move rtc.h to drivers/rtc.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move pwm.h to drivers/pwm.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move pinmux.h to drivers/pinmux.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move led_strip.h to drivers/led_strip.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move ipm.h to drivers/ipm.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move i2s.h to drivers/i2s.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move i2c.h to drivers/i2c.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move hwinfo.h to drivers/hwinfo.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move gpio.h to drivers/gpio.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move flash.h to drivers/flash.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move entropy.h to drivers/entropy.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move dma.h to drivers/dma.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move counter.h to drivers/counter.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move clock_control.h to drivers/clock_control.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move can.h to drivers/can.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move aio_comparator.h to drivers/aio_comparator.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move adc.h to drivers/adc.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move watchdog.h to drivers/watchdog.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move zephyr/jwt.h to data/jwt.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move json.h to data/json.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move power.h to power/power.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move disk_access.h to disk/disk_access.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move crc.h to sys/crc.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move base64.h to sys/base64.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move atomic.h to sys/atomic.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move stats.h to stats/stats.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move nvs/nvs.h to fs/nvs.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move fcb.h to fs/fcb.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move fs.h to fs/fs.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move flash_map.h to storage/flash_map.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Test the HW stack protection feature for threads that are
pre-tagged as FPU users, when building with support for FP
shared registers mode (CONFIG_FP_SHARING=y).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Convert DT_.*_GPIO_{CONTROLLER,PIN,FLAGS} ->
DT_.*_GPIOS_{CONTROLLER,PIN,FLAGS)
Used the following commands to make these conversions:
git grep -l DT_.*_GPIO_CONTROLLER | xargs sed -i 's/DT_\(.*\)_GPIO_CONTROLLER/DT_\1_GPIOS_CONTROLLER/g'
git grep -l DT_.*_GPIO_PIN | xargs sed -i 's/DT_\(.*\)_GPIO_PIN/DT_\1_GPIOS_PIN/g'
git grep -l DT_.*_GPIO_FLAGS | xargs sed -i 's/DT_\(.*\)_GPIO_FLAGS/DT_\1_GPIOS_FLAGS/g'
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Test needs trivial modification to account for new APIC timer code.
Eventually CONFIG_APIC_TIMER_IRQ, CONFIG_LOAPIC_TIMER_IRQ, etc. will
be consolidated into one CONFIG_TIMER_IRQ to reduce the noise a bit.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
USBD_CFG_DATA_DEFINE macro has not consider that a class
could have more than one set of usb_cfg_data struct.
If a class has more than one set of usb_cfg_data
then they should be sorted the same way like by
USBD_DEVICE_DESCR_DEFINE macro.
Fixes: #16240
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Port the lis2dw12 sensor driver on top of the lis2dw12_StdC
HAL interface (in modules/hal/st/sensor/stmemsc/).
Signed-off-by: Armando Visconti <armando.visconti@st.com>
The commit contributes a simple test for the Zero-Latency
IRQ feature (CONFIG_ZERO_LATENCY_IRQS=y) for ARM platforms.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The first word is used as a pointer, meaning it is 64 bits on 64-bit
systems. To reserve it, it has to be either a pointer, a long, or an
intptr_t. Not an int nor an u32_t.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Unfortunately this seems to have introduced spurious failures on (at
least) qemu_x86 and qemu_xtensa.
The change limits the timeslice tolerance to +/- 1ms, which isn't
necessarily correct when the tick rate is less than 1ms (though it
will probably work on deterministic hardware as long as the system is
hitting the target at exactly the right tick), and isn't even
theoretically achievable on emulation environments where timing
granularity is limited by the host scheduling quantum.
What this needs to do is check the deadline is off by at most one
tick, and trust the platform integration to have set the tick rate
appropriately.
(I do worry that the earlier version of the test was trying to set the
limit at half the TICKLESS_IDLE_THRESHOLD, though -- that seems weird,
and hints that maybe the test is trying to do something more
elaborate?)
Fixes#17063.
This reverts commit 62c71dc4d8.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
We had no system call coverage for k_thread_suspend
and k_thread_resume.
Some unnecessary cleanup tasks in the test case have
been removed.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We didn't have code coverage for this function anywhere
except indirectly through some network tests; exercise it
in the suite of userspace tests.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Address a coverage gap in kernel/userspace.
Unfortunately, in the process of fixing this, a bug was
discovered, see #17023.
This test is user mode specific, filter the testcase
on whether userspace is available instead of ifdefing
the code.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We had plenty of coverage for k_cycle_get(), but not its
32-bit variant. Run a case in user mode so that the system
call handler gets covered.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
It is useful that the ptp_clock_get() function can be called from
the userspace. Create also unit test for calling that function
from userspace.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make net_eth_get_ptp_clock_by_index() clock API to work with user space.
Create also unit test for testing this user mode support.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The Quark D2000 is the only x86 with an MVIC, and since support for
it has been dropped, the interrupt controller is orphaned. Removed.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This commit introduces new top_value setting configuration structure
with flag for controlling resetting of the counter during change of
top value.
Such change allows for #12068 implementation on hardware which
does not provide alarms.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Signed-off-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
This adds initial test for GATT APIs that don't require a connection
thus can be run without any extra setup.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds initial test for L2CAP APIs that don't require a connection
thus can be run without any extra setup.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
It should no longer be needed to set NO_QEMU_SERIAL_BT_SERVER manually
when setting CONFIG_BT_NO_DRIVER.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
For the ARM architecture we would like to test the HW
Stack Protection feature when building with support for
FP shared registers mode (CONFIG_FP_SHARING=y), as a
means of increasing coverage.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
For ARM architecture, use Z_THREAD_MIN_STACK_ALIGN to define
MEM_REGION_ALLOC in tests/kernel/mem_protect/mem_protect/.
STACK_ALIGN takes into account MPU stack guard alignment
requirements. However, application memory partitions do not
require MPU stack guards, therefore, the alignment requirements
are not applicable here.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Match what other drivers are doing and use the general BUS define.
Change DT_ST_LIS2DH_0_BUS_SPI to DT_ST_LIS2DH_BUS_SPI
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Log records may store either data or pointers to more records. In both
cases they must have the same size. With 64-bit pointers, the amount
of data that can occupy the same space as a pointer has to be adjusted.
And storage alignment has to accommodate actual pointers not u32_t.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Log arguments were hardcoded to u32_t values. On 64-bit systems, this
is rather restrictive. To make things clear, arguments now have their
own type, log_arg_t, which now can be adjusted in only one location
if need be. It is currently defined as unsigned long whose effective
width is equivalent to u32_t on 32-bit systems, and u64_t on 64-bit
systems.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
We missed converting DT_OPENISA_RV32M1_LPTMR_SYSTEM_LPTMR_IRQ to
DT_OPENISA_RV32M1_LPTMR_SYSTEM_LPTMR_IRQ_0.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The last FCB test to run (fcb_test_last_of_n) uses uninitialized
test_data[] and leaves behind a flash.bin with random content. Pick
another one (fcb_test_reset) that leaves a deterministic flash.bin
behind and run that last instead.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
If user supplies AF_UNSPEC, we need to do two queries, one for
IPv4 A record and one for IPv6 AAAA record.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This function uses mqtt_read_publish_payload_blocking to perform a
blocking read of the specified number of bytes.
When reading out a payload, the normal use case is to read the
entire payload. This function facilitates that use case.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
Found a few annoying typos and figured I better run script and
fix anything it can find, here are the results...
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We would like to test the HW stack protection feature in ARM
builds with no user-mode support, i.e. CONFIG_USERSPACE=n. For
that we add a new test-case in tests/kernel/fatal test suite.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This test case is so timing sensitive that gathering code
coverage data screws up the results.
Since this is an abnormal execution environment anyway,
just skip the assertions if CONFIG_COVERAGE=y.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We didn't have any coverage of the system call handlers for
k_wakeup() and k_is_preempt().
Increase RAM requirements due to stack alignment constraints
on MPU platforms when user mode is enabled.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Fix how the tstacks array was declared extern so this
actually compiles on all platforms with user mode enabled.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
YAML document separators are needed e.g. when doing
$ cat doc1.yaml doc2.yaml | <parser>
For the bindings, we never parse concatenated documents. Assume we don't
for any other .yaml files either.
Having document separators in e.g. base.yaml makes !include a bit
confusing, since the !included files are merged and not separate
documents (the merging is done in Python code though, so it makes no
difference for behavior).
The replacement was done with
$ git ls-files '*.yaml' | \
xargs sed -i -e '${/\s*\.\.\.\s*/d;}' -e 's/^\s*---\s*$//'
First pattern removes ... at the end of files, second pattern clears a
line with a lone --- on it.
Some redundant blank lines at the end of files were cleared with
$ git ls-files '*.yaml' | xargs sed -i '${/^\s*$/d}'
This is more about making sure people can understand why every part of a
binding is there than about removing some text.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Some MPU systems require region power-of-two alignment
and can't automatically use remaining RAM for the newlib
heap. Set it for this case. Fixes this test on mps2_an385.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The settings module processes the variable name by splitting it up in
a set of variables. This PR removes the splitting up and keeps the
variable name as one string.
It is an alternative to #16609
The possibility is introduced to register handler including a
separator, or to register a handler for each variable.
The ability is introduced to load a subtree from flash or even to load
a single item.
Two ways to operate on variable and settings_handler names are provided:
settings_name_steq(const char *name, const char *key, const char **next)
which checks if name starts with key, returns 1/0 if it does/does not
the remaining part of name is in next.
settings_name_split(const char *name, char *argv, const char **next)
which splits up name in a part before "/"" that is found in argv and
the remaining part that is in next.
A mutex is added to make settings thread-safe
The settings_handlers list is stored in reverse alphabetical order, this
allows registration of e.g. bt and bt/mesh in separate handlers, the bt
handler itself should not contain any handling of bt/mesh.
A settings_deregister() method is added. Settings_handlers can now be
added/removed when required. This saves RAM when settings_handlers are
not needed.
Tests have been updated to reflect changes in the settings api.
Updates after meeting:
1. Removed settings_deregister
2. Changed settings_name_split() in settings_name_next:
int settings_name_next(const char *name, const char **next): returns
the number of characters before the first separator. This can then be
used to read the correct number of characters from name using strncpy
for processing.
3. New functional test added
Update in settings.h: settings_name_next() changed position -> index
Added some comments in settings.h (settings_name_steq())
Updated tests to reflect change to settings_name_next() and pointer
value comparison. The functional test can now also run on qemu_x86.
Corrected some documentation in header.
Changed registration of handlers to be non ordered.
Changed handler lookup to handle non ordered list of handlers, this
improves handler matching in case different length names are compared
and also makes it easier to add rom based handlers as they will not be
ordered.
Signed-off-by: Laczen JMS <laczenjms@gmail.com>
The syscall handler for k_poll() returns error values
instead of killing the caller for various bad arguments,
cover these cases.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
These were never getting called anywhere from user mode,
except for k_queue_alloc_append(), but only by virtue of
some workqueue tests.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Addresses coverage gaps. Some changes were made so that exited
threads do not have k_thread_abort() called on them.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
On 64-bit systems the most notable difference is due to longs and
pointers being 64-bit wide. Therefore there must be a distinction
between ints and longs. Similar to the prf.c case, this patch properly
implements the h, hh, l, ll and z length modifiers as well as some small
cleanups.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This commit adds a test in tests/kernel/fatal test-suite, which checks
that the HW stack overflow detection works as expected during a user
thread system call.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
In ARM architecture z_priv_stack_find() returns the start of a
thread's privilege stack; we do not need to subtract the length
of a (possible) stack guard. This commit corrects the assigning
of the start address of a thread privilege stack in
test/kerne/mem_protect/mem_protect/userspace.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Change code from using now deprecated DT_<COMPAT>_<INSTANCE>_<PROP>
defines to using DT_INST_<INSTANCE>_<COMPAT>_<PROP>.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The DT spec. only has "okay" and not "ok". The Linux kernel has around
12k "okay"s and 300 "ok"s.
The scripts/dts scripts only check for "disabled", so should be safe re.
those at least.
The replacement was done with
git ls-files | xargs sed -i 's/status\s*=\s*"ok"/status = "okay"/'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Change code from using now deprecated DT_<COMPAT>_<INSTANCE>_<PROP>
defines to using DT_INST_<INSTANCE>_<COMPAT>_<PROP>.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This option is set iff CONFIG_X86 is set, thus it provides no useful
information. Remove the option and replace references with CONFIG_X86.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The k_stack data type cannot be u32_t on a 64-bit system as it is
often used to store pointers. Let's define a dedicated type for stack
data values, namely stack_data_t, which can be adjusted accordingly.
For now it is defined to uintptr_t which is the integer type large
enough to hold a pointer, meaning it is equivalent to u32_t on 32-bit
systems and u64_t on 64-bit systems.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
We can now invoke k_float_disable(.) for ARM platforms,
too, since we introduced the function as a cross-arch
system call.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Using void pointers as universal arguments is widely used. However, when
compiling a 64-bit target, the compiler doesn't like when an int is
converted to a pointer and vice versa despite the presence of a cast.
This is due to a width mismatch between ints (32 bits) and pointers
(64 bits). The trick is to cast to a widening integer type such as
intptr_t and then cast to
void*.
When appropriate, the INT_TO_POINTER macro is used instead of this
double cast to make things clearer. The converse with POINTER_TO_INT
is also done which also serves as good code annotations.
While at it, remove unneeded casts to specific pointer types from void*
in the vicinity, and move to typed variable upon function entry to make
the code cleaner.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Minimum block size is 2x larger on 64-bit systems, so let's simply
double all size params. This won't change the validity of those tests
on 32-bit systems. Alignment tests are also adjusted for wider pointers.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This is the generic symbol to select or otherwise test for when 64-bit
compilation is desired. Two trivial usages of this symbol are also
included.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This test is already flaky, but becomes even flakier when
coverage is enabled.
Disable until we put a stake through the QEMU timing issues
being worked on in #14173.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The test_timer_periodicity waits for first timer expiration
in order to extract timer firing time. The wait is performed
using k_timer_status_sync() API call, which blocks thread
until timer expiration. However if the timer expired before
call the this function, it will return immediately, triggering
test failure.
This commit adds the second call to the k_timer_status_sync()
to ensure that the following part of the test will be executed
as soon as possible after timer expiration.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Per guidelines, all statements should have braces around them. We do not
have a CI check for this, so a few went in unnoticed.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
With pull request #16208 and #16404 hooks for calling user defined
code was implemented. These user extensions are gated by a number of
Kconfigs. The test in this pull request tests that code compiles when
these Kconfigs are enabled.
Signed-off-by: Asger Munk Nielsen <asmk@oticon.com>
The file descriptor was not closed after the test which caused
Coverity to complain about resource leak.
Coverity-CID: 198640
Fixes#16493
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Contrary to the comment in code, this test is NOT, in fact, compiled
with a traditional ticked kernel. Spinning won't work reliably
because interrupts won't necessarily be delivered when you expect.
This test case would fail spuriously as I moved things around when
debugging.
Doing it right (using a k_timer in this case) is actually less code
anyway.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
It's useful to be able to inspect the key returned from
z_arch_irq_unlock() to see if interrupts were enabled at the point
where z_arch_irq_lock() was called. Architectures tend to represent
this is a simple way that doesn't require platform assembly to
inspect.
Adds a simple test to kernel/common that validates this predicate with
a nested lock.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This commit changes zassert_mem_equal as a macro instead
of a function implementation.
In the previous implementation when an assertion fails
the location inside ztest_assert.h file was displayed.
This modification displays the location where zassert_mem_equal
was used.
Signed-off-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
Casting the tid variable from a void* into an u32_t just to cast it
back to a pointer is pointless. Let's make it a osThreadId variable
upfront and get rid of those casts around it. This also makes it
64-bit compatible.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Use a system clock tick of 0.1 sec when running on the NXP TWR-KE18F
development board.
Fixes#16234.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
On boards that have the arm or nxp mpu, configure the mpu to allow flash
writes. Otherwise this test will fail with an mpu fault.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
In the wake of moving the internal API header arm_core_mpu_dev.h
into arch/arm/cortex_m/mpu, we need to explicitly declare the
arm_core_mpu_disable() function in the userspace test. Note that
arm_core_mpu_disable() (as any other function in this internal
API) is not supposed to be called directly by kernel/application
functions; an exception is allowed in this test suite, so we are
able to test the MPU disabling functionality.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Shell history module reworked to use ring buffer for storing
commands. Dedicated buffer is used to story all command lineary.
History capacity is in bytes not in number of entries, e.g.
many short commands can be stored or few long (depending on
CONFIG_SHELL_HISTORY_BUFFER).
Removed implicit command null termination from shell_history and
added it to shell after fetching command line from the history.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
- Delete CONFIG_TEST_USERSPACE=n no-ops because it's the default
since commit 7b1ee5cf13
- Some tests have a "userspace" tag pretending to TEST_USERSPACE but
don't and vice versa: fix missing or spurious "userspace" tags in
testcase.yaml files.
Tests have a _spurious_ "userspace" tag when they PASS this command
cause none should pass:
./scripts/sanitycheck --tag=userspace -p qemu_x86 \
--extra-args=CONFIG_TEST_USERSPACE=n \
--extra-args=CONFIG_USERSPACE=n | tee userspace.log
All tests run by this command must either fail to build or fail to run
with some userspace related error. Shortcut to look at all test
failures:
zephyr_failure_logs() {
awk '/see.*log/ {print $2}' "$@"
}
Tests _missing_ "userspace" tag FAIL to either build or to run with some
userspace related error when running this:
./scripts/sanitycheck --exclude=userspace -p qemu_x86 \
--extra-args=CONFIG_TEST_USERSPACE=n \
--extra-args=CONFIG_USERSPACE=n | tee excludeuserspace.log
Note the detection methods above are not 100% perfect because some
flexible tests like tests/kernel/queue/src/main.c evade them with #ifdef
CONFIG_USERSPACE smarts. Considering they never break, it is purely the
test author's decision to include or not such flexible tests in the
"userspace" subset.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Fix a bug in the latency_measure sample where, when the board was
specified through the environment, the wrong prj.conf file was
selected.
This change is not a pure refactoring, as it is believed that there
have been some copy-paste mistakes where prj_small_freq_divider.conf
and prj.conf have become out-of-sync over time. These assumed mistakes
are not carried over in the new organization.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Remove commented-out code in the latency_measure sample. Commented out
code should not be committed to version control.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Now length of the UDP header is checked, and obviously these test were
avoiding setting it properly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The various ptp_clock_driver_api methods receive a struct ptp_context
not a struct eth_context, and the later must be obtained from a
reference stored in the former. Failing to do so by directly
interpreting driver_data as a struct eth_context instance does end up
corrupting memory past the actual struct ptp_context storage. The test
may still pass as ptp_clock_get() reads from the same out-of-bounds
memory as the previous ptp_clock_set() and therefore the content
matches, and with luck the corrupted memory is not essential to the
completion of the test. But that wasn't my case which allowed me to
find this issue.
Fix this by properly obtaining a reference to the struct eth_context
instance via the actual struct ptp_context, and adding a test like
the one found in eth_tx() to make sure we got the right memory.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This commit adds the default configuration to the flash_simualtor
to allow unaligned reads.
Disable this option when testing to increase test coverage.
Signed-off-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
Refactor device api test using standard placement for descriptor table
and configuration data.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Remove duplicated execution path for composite configuration, USB
device stack initialization is done inside stack for both cases.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
In order to unify the legacy and composite code, move the class and
vendor request handler buffer into the USB device code, just like in
composite mode. The option is renamed from USB_COMPOSITE_BUFFER_SIZE
into USB_REQUEST_BUFFER_SIZE and also replaces the USB_DFU_MAX_XFER_SIZE
and USB_HID_MAX_PAYLOAD_SIZE options.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add an explict test for the length of the receive event when
doing incremental receives. This was not tested anywhere in the
normal code path (only implicitly in the abort, which wasn't
exercised on the only current implementation, nrfx). So add an
explicit check for it during the chained reads, so that the
test can catch the case where multiple receive events do not set
the length correctly on events past the first.
Tested on nrf52840_pca10056.
Signed-off-by: Derek Hageman <hageman@inthat.cloud>
This reverts commit d09b91f5. I was incorrect in my interpretation
of the async API: the number of bytes received is relative
to the previous event, so it does "reset" between calls.
Signed-off-by: Derek Hageman <hageman@inthat.cloud>
Added a test case with corner case scenario, in which sector closing
operation is interrupted (e. g. due to power-down).
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
I2C_STM32_V1 and I2C_STM32_V2 are Kconfig symbols used to
select STM32 I2C driver variant based on I2C IP available on a
given STM32 SoC.
Being SoC dependent, they are automatically selected in soc/
if CONFIG_I2C is set. Then there is no need to define them at board
level, nor for a specific application like this is done in
some sample or test applications. Remove these definitions when
this is the case.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Added a test for testing full round GC on 3-sectors
configuration. In this case all kind off sector can
appeared so this test covers well more numerous
sectors configurations.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
The time measurement based on k_uptime_delta() might be not accurate
for some values of CONFIG_SYS_CLOCK_TICKS_PER_SEC. This commit
introduces measurement based on k_cycle_get_32(), which is more
precise.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The time measurement based on k_uptime_delta() might be not accurate
for some values of CONFIG_SYS_CLOCK_TICKS_PER_SEC. This commit
introduces measurement based on k_cycle_get_32(), which is more
precise.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
This commit changes the timer_api test in order to take under account
fact that timeouts used in the test might not be aligned to tick
boundary.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
As printf() is now used directly instead of printf proxy function,
there's warning-as-error that long long is passed where %lu
expected, so cast it explicitly.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
It exists only if MBEDTLS_PLATFORM_PRINTF_ALT is defined, whcih we
no longer do, but make the call condiitonal in case we'll need to
make it configurable later.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This tries to build gpio without any driver which fails at cmake time
like this:
CMake Error at ../../../cmake/extensions.cmake:378 (add_library):
No SOURCES given to target: drivers__gpio
Call Stack (most recent call first):
../../../cmake/extensions.cmake:355 (zephyr_library_named)
../../../drivers/gpio/CMakeLists.txt:3 (zephyr_library)
Remove TEST_USERSPACE workaround added in commit 3b53e69249 which
added gpio_handlers.c to the SOURCES.
Fixes#15232.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Test that k_usleep() allows sleep durations near the limit of what
the platform's tick rate will allow.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
In all architectures, except x86, __start_swap_time is directly
updated by function read_timer_start_of_swap(), and it shall not
be registered via __temp_start_swap_time.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add test for a proprietary HCI Vendor-Specific event.
In the test the controller is replaced with a small stub controller,
with limited support of the initialization flow from the host.
After initialization, a HCI prop event callback is registered and an
prop event is triggered and sent to the host. It is then verified that
the registered callback is called.
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
Add LiteX timer driver with bindings for this device.
Signed-off-by: Filip Kokosinski <fkokosinski@internships.antmicro.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
Add an option for building with newlib-nano library.
The newlib-nano library for ARM embedded processors is a part of the
GNU Tools for ARM Embedded Processors.
Add mem_alloc tests with newlib nano.
Signed-off-by: Benoit Leforestier <benoit.leforestier@gmail.com>
Reduced Kconfig for counter with nRF TIMER and RTC. Added overlays
for TIMER and RTC configuration in the counter test.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The implementation of the <misc/math_extras.h> functions will use the
portable C code when PORTABLE_MISC_MATH_EXTRAS is defined before
including the header.
Use this feature macro to make sure that the unit test always tests the
portable functions in addition to the ones using builtins for the
current compiler.
Signed-off-by: Jakob Olesen <jolesen@fb.com>
Add a <misc/math_extras.h> header file with portable implementations of
a number of commonly used math and bit counting operations that are not
available in the C programming language.
The math_extras functions fall into two groups:
1. Unsigned integer arithmetic with overflow detection. Addition and
multiplication are provides for the u32_t, u64_t, and size_t types.
This commit doesn't include subtraction and division, and there are
no signed operations. These could be added later if there is a need.
2. Bit-counting operations like clz, ctz, and ffs. These are provided
for u32_t and u64_t only. I don't see a need for size_t operations,
but they could be added if needed.
A follow-on commit will add more efficient implementations using
compiler builtins for those compilers that support it.
Another commit will replace other uses of "naked" compiler builtins with
calls to these functions.
Signed-off-by: Jakob Olesen <jolesen@fb.com>
Enable the counter capability in the board and add a .conf file for the
nRF52810 running on the PCA10040 board.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This commit adds support for board: nrf52811_PCA10056.
The nRF52840 DK: PCA10056 is the recommend development kit, it emulates
the nRF52811, and can be used as a starting point for development
before moving over to a custom board.
Please note that this development kit does not support Bluetooth
Direction Finding. What is more it cannot be used with most of Arduino
shields because of PCA10056 PIN layout.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Added basic tests for the NVS file system. One of the tests covers power
down during the flash write operation.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Define DT_CAN_1_NAME as an empty string if it is not defined.
This is useful for buildtest where no HW is available.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
This commit extends the CAN api can_send function by an argument
that is passed to the isr callback.
With this extension it is possible to distinguish between sent masseges
when they use the same callback.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
This commit extends the CAN api attach_isr function by an argument
that is passed to the isr callback.
With this extension it is possible to distinguish between filter matches
when they use the same callback.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
During the write abort test, a second write is started then quickly
aborted. This means that the number of bytes sent is relative
to that second write. So when comparing it against the number
of bytes received which is NOT reset, the first (completed)
send of five bytes has to be accounted for. The current
nrfx implementations abort quick enough that no bytes are reported
sent, so this wasn't currently being exercised (i.e. the short
circuit of zero bytes sent was taken).
Tested on nrf52840_pca10056.
Signed-off-by: Derek Hageman <hageman@inthat.cloud>
Some configuration for the boards have to be added into test_adc.c file
so user can test driver with the test cases. Several nucleo boards are
added including F091RC/F103RB/F207ZG/F302R8/F401RE/F746ZG/L073RZ/L476RG.
And also ADC dts and pinmux configuration are added into boards own
pinmux.c and dts file.
Signed-off-by: Song Qiang <songqiang1304521@gmail.com>
According to POSIX, that's the header which defines this function.
Similarly, nothing in POSIX indicates that <time.h> should have
access to struct timeval, so it's removed (it's made accessible
to <sys/time.h> via <sys/_timeval.h> introduced earlier).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
It is convenient to have a blocking version of
`mqtt_read_publish_payload` function, for cases when it is called from
the event handler. Therefore, extend the 'mqtt_read_publish_payload'
argument list with information whether the call should block or not.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This adds generic support for any board using the SAM0 ADC driver.
The test selects the internal input from the scaled I/O voltage,
which is always available on the ADC.
Signed-off-by: Derek Hageman <hageman@inthat.cloud>
There were various flaws in it that motivated its removal:
- No hash collision handling mechanism. In case that would happen, the
behavior of the network connection would be unknown. This is the main
drawback
- The lookup is not that much more efficient than the default one. The
only difference of gain is in connection comparison (a u32t comparison
vs a full connection compare). But the list handling is the same. It's
made worse by the presence of a negatives match array which can be
easily filled in and becomes then fully usless, appart from consuming
CPU. As well as adding a new connection: it requires the whole cache
to be cleared which is unefficient.
- Not memory efficient, even compared to a proper hash table.
Two arrays instead of one etc...
All of this could be fixed by using a proper hash table, though it
remains to be seen if such object could fit in Zephyr core.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Inside function test_net_pkt_basics_of_rw result of function call
net_pkt_read_be16 is not checked which might result performance
of the program and cause errors.
Coverity-CID 198003
Fixes#15776
Signed-off-by: Maksim Masalski <maxxliferobot@gmail.com>
Fixes the compile errors in various platforms like:
* sam_e70_xplained (too few network buffers)
* galileo, cc3220sf_launchxl and mps2_an385 (missing random number
generator configuration options)
Fixes#15878
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This test uses ztest anyway, the default should be fine
just like any other test running under ztest.
k_thread_create() uses a lot of stack, and the main
stack size is very small if ztest is enabled. Do it in
another ztest task instead.
We don't need to mess with the main thread's priority,
just have the alt thread run cooperatively.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
net_if_ipv6_calc_reachable_time() requires sys_rand32_get().
Enable the test random number generator so the build doesn't
fail.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
There are limits to CMSIS stack sizes, we can't just
add a number to it. Use the configured maximum.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Set to same default as regular stacks. This doesn't use
any extra memory until CMSIS_V2_THREAD_DYNAMIC_MAX_COUNT
is set. 0 is not a valid default if that is set.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The various struct pipe_sequence were not located in memory
accessible to user mode. With optimization turned on, they
weren't in memory at all, but with code coverage enabled
the arrays were actually being read, resulting in memory
access failures from user mode.
Fix them by placing in ROM, they never get modified.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
device_get_binding() compares pointers first before doing strcmp().
However, enabling coverage forces -O0 to disable any compiler
optimizations. There would be multiple copies of the same string,
and the code pathing doing pointer comparsion would not be tested
at all. So add this flag to merge string constants such that
the pointer comparison would be exercised.
This also adds a bad driver which fails initialization. This is
to make sure that execution path is covered.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
As the getaddrinfo() test is suppose to be self contained, then
we will need to install handler for the sent DNS query. After we
receive the query in process_dns() thread, we verify that the
query was sent properly. We do not return DNS reply back to
the caller in this case as we do not want to create DNS server
just for this simple test application. This can be changed later
if we get DNS server functionality in Zephyr network stack.
Fixes#15193
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add the Atmel SAM R21 Xplained Pro Evaluation Kit to zephyr.
So far, UART, SPI, I2C (depends on #14128), debug LED and user button
have been tested.
Signed-off-by: Benjamin Valentin <benpicco@googlemail.com>
Add verification that interface number and endpoint addresses are
correctly allocated.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Removed the CONFIG_ prefix from definitions, which are declared in the
test source file. They could be easily confused with Kconfig
definitions.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Exclude the two variants of smt32_min_dev (stm32_min_dev_black and
stm32_min_dev_blue) from kernel tests.
Signed-off-by: Siddharth Chandrasekaran <siddharth@embedjournal.com>
Major changes are:
- Expose settings backend API to enable custom backend support.
- Add a new CONFIG_SETTINGS_CUSTOM backend to allow registering a custom
backend.
- Change api of the handlers h_set() routines to allow for
backend-specific read callbacks.
- Provide a customizable settings_backend_init() routine for custom
backends.
- Move runtime settings support to be its own backend.
Signed-off-by: François Delawarde <fnde@oticon.com>
ipv6_fragment tests registered log module but still use DBG
macro of printk. Replaced them with NET_DBG.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This commit adds a tests for flash simulator driver implementation
for qemu_x86 boards.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
The test is to run for boards that have memory protection
enabled; having MPU capabilities on the SoC level is not
sufficient (the user, or the board itself, might not enable
memory protection support). This commit applies that policy
to the mem_protect/protection test suite.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add more Kconfig options to prj.conf file. In the future we need
to compile also in other hw than qemu_x86 in which case we need to
create separate test cases for those configurations.
Fixes#15282
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use the improved HMAC_PRNG test from TinyCrypt version 0.2.8,
(commit 6e0eb53fc8403988f97345e94081b0453f47231d),
that was imported into Zephyr in
commit 06d0b6a694.
Rewrote part of the test code to use the ztest asserts and
test_utils.h functionality.
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
Instead of checking for -EINVAL check that return is not successful
since USB device may return other error code.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Write the net_pkt using net_pkt_write() and then verify that the
data is actually written into net_buf.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This makes the output of file2hex.py deterministic by default while also
letting the user set the mtime in the gzip header manually if desired.
Use the option without any argument to restore the previous behavior
that sets the current (and obviously changing) "now" timestamp.
To test: ./sanitycheck --tag gen_inc_file
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Exclude nucleo_f302r8 platform as the tests doesn't fit in flash size.
This is due to that fact that we pull in newlib for the STM32 counter
driver.
Fixes#15460
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
revert commit 3e255e968 which is to adjust stack size
on qemu_x86 platform for coverage test, but break other
platform's CI test.
Fixes: #15379.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
for SDK 0.10.0, it consumes more stack size when coverage
enabled, so adjust stack size to fix stack overflow issue.
Fixes: #15206.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
for SDK 0.10.0, it consumes more stack size when coverage
enabled, so adjust stack size to fix stack overflow issue.
Fixes: #15206.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
We need to use the ARMV7_M_ARMV8_M_FP Kconfig symbol,
which denotes the Floating-Point capabilities, instead
of the option that signifies the Cortex-M variant. Fix
is of minor importance, as long as the #ifdef block
remains empty.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Casting the rb_data character array to a u32_t can result
in an unaligned u32_t * pointer being passed to
ring_buf_item_put(), since rb_data is only byte-aligned.
Our Altera Max10 CPU build is not configured to detect
unaligned memory access and throw an exception, it is
instead rounding down the memory address
of the data pointer to the nearest 4-byte value, causing
the wrong data to be copied into the ring buffer.
It appears that in the C standard this is considered
Undefined Behavior so the approach this patch takes is
to fix the test, by ensuring that rb_data is aligned to
u32_t.
Fixes: #14869
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The NSIM emulator has severe performance issues when
the MPU registers are reprogrammed on context switch.
Disable runtime reprogramming of the MPU for these
platforms on these two tests, which have a lot of context
switch thrashing. This is done by ensuring userspace
and hardware stack overflow detection via guard areas
is disabled.
I have assurances from the ARC team that the tests run fine
on real hardware and this is an emulation issue.
For 1.15, this will be completely resolved by optimizing
MPU region gap-filling to not take place during context
switch time, which will drastically reduce the number of
MPU registers poked during context switch on nsim_sem.
Meanwhile, for 1.14 we ensure that no runtime reprogramming
of the MPU is done for these tests.
Fixes: #14642
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Unaligned test might filed in case fcb area was not clen before
run.
The patch insert clean operation before this test.
fixes#15063
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
We were running this as a test and not evluating the output. Now we
verify the output and stop treating this as a ztest item.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Unlike CONFIG_HW_STACK_PROTECTION, which greatly helps
expose stack overflows in test code, activating
userspace without putting threads in user mode is of
very limited value.
Now CONFIG_TEST_USERSPACE is off by default. Any test
which puts threads in user mode will need to set
CONFIG_TEST_USERSPACE.
This should greatly increase sanitycheck build times
as there is non-trivial build time overhead to
enabling this feature. This also allows some tests
which failed the build on RAM-constrained platforms
to compile properly.
tests/drivers/build_all is a special case; it doesn't
put threads in user mode, but we want to ensure all
the syscall handlers compile properly.
Fixes: #15103 (and probably others)
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
For mysterious reasons this test fails cmake if
CONFIG_TEST_USERSPACE=n.
Enable it for now, bug tracked in #15232
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This lets us quickly filter tests that exercise userspace
when developing it.
Some tests had a whitelist with qemu_cortex_m3; change
this to mps2_an385, which is the QEMU target with an
MPU enabled.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We need all the socket APIs to work from user mode.
tests/net/socket/misc now runs in userspace.
Fixes: #15227
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The test is designed to run in user mode, but was disabled
for some reason.
Re-enable, and add mps2_an385 to the whitelist as this is
the QEMU target that emulates an MPU.
Fixes: #15228
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The results were incorrect because the timer was firing the
interrupts before the measurement was made.
Fixes: GH-14556
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
This macro is slated for complete removal, as it's not possible
on arches with an MPU stack guard to know the true buffer bounds
without also knowing the runtime state of its associated thread.
As removing this completely would be invasive to where we are
in the 1.14 release, demote to a private kernel Z_ API instead.
The current way that the macro is being used internally will
not cause any undue harm, we just don't want any external code
depending on it.
The final work to remove this (and overhaul stack specification in
general) will take place in 1.15 in the context of #14269Fixes: #14766
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Improvement in test case name is needed to make it easier
to navigate from test case name to the actual test
folder.
This is useful as some tools that consume tests directory
will only output test case name without directory names
Signed-off-by: Cinly Ooi <cinly.ooi@intel.com>
Merge cb_usb_status_composite and cb_usb_status and use common
forward_status_cb for both composite and normal devices.
Fixes#14882
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This test was having trouble earlier (at least with some toolchains),
but whatever was causing that seems to have been fixed. The only
remaining issue is that neither the IPM console code nor the test are
SMP-safe. There's a bug (#14639) tracking the need to get these
working, but for now the straightforward workaround is just to disable
SMP.
And even long term, IPM is an oddball interprocessor communication
mechanism designed for asymmetric multiprocessing devices like Quark
SE and doesn't seem like an obvious fit for a SMP machine.
Fixes#12478
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
for SDK 0.10.0, it consumes more stack size when coverage enabled
on qemu_x86 and mps2_an385 platform, adjust stack size for most of
the test cases, otherwise there will be stack overflow.
Fixes: #14500.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
on platform nrf52810_pca10040, the remaining sram space is not enough
to build test cases kernel.sched.preempt and kernel.poll, temporary
exclude nrf52810_pca10040 on that two cases, will open them when issue
is fixed.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Rename reserved function names in arch/ subdirectory. The Python
script gen_priv_stacks.py was updated to follow the 'z_' prefix
naming.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Rename reserved function names in drivers/ subdirectory. Update
function macros concatenatenating function names with '##'. As
there is a conflict between the existing gpio_sch_manage_callback()
and _gpio_sch_manage_callback() names, leave the latter unmodified.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
The stack information stored in the thread->stack_info
fields need to represent the actual writable area for
its associated thread. Perform various tests to ensure
that the various reported and specified values are in
agreement.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Permission management no longer necessary, the former
parameter for the mutex is now simply ignored.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Various globals for the test cases have been moved to
the ztest memory domain data section via ZTEST_DMEM tags
so that user mode can access them.
Some anonymous arrays whose address was being placed in
the msg_subackX structs have been split out so they
are in ztest memory domain.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This test is only trying to prove that k_thread_foreach() works,
it has nothing to do with stacks. Remove the stack checks
completely.
Fixes: #15044
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
It's really not possible to design a test where we can
enforce expectations on real vs. expected stack size:
- Some platforms may increase stack size over what is expected
due to rounding up the stack buffer area to the next power
of two.
- Some configuration options like CONFIG_STACK_RANDOM
carve out space in the stack buffer, resulting in a stack
size less than what is expected.
Best we can do is just assert that the amount of space
available should be less than the total size reported.
Fixes: #14640
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We define a system heap and assign our resource pool
from it as k_poll() requires an implicit allocation.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
k_disable_float is only available in X86 when LAZY_FP_SHARING is
set. Adding this condition before using this function.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Setting callbacks is forbidden from user mode.
Some heavier code changes will be needed to support
adc_read_async(), this patch just exposes the config
and read functions for now.
Test case updated to run partially in user mode.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Tickless kernel is now always disabled, ensuring that when
the kernel's tick count changes, we really did get a timer
interrupt.
The test now awaits a change in tick count instead of busy
waiting for an arbitrary time period.
Fixes: #15013
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Increase test timeout to 500s because it was noticed
that the default of 60s has truncated the test
suite run for nrf52840_pca10056
Signed-off-by: Cinly Ooi <cinly.ooi@intel.com>
The original code cannot go to the next step on those boards enabled
TEST_WDT_CALLBACK_2 macro, because of the flow control issue. So the
test function cannot finish, and the board keeps restart. As a result,
failure on the test.
Fixes#13468
Signed-off-by: Aaron Tsui <aaron.tsui@outlook.com>
The last commit changes FXOS8700 to use new DT defines in its
dts_fixup.h, and the build was also succeeded after it. But
DT_NXP_FXOS8700_0_INT2_GPIOS_CONTROLLER and
DT_NXP_FXOS8700_0_INT2_GPIOS_PIN were missed so the build_all project
is still failing.
Signed-off-by: Song Qiang <songqiang1304521@gmail.com>
We are reporting success twice, once by calling macro directly, and once
by using ztest test_main().
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
stack check exception may come out with other protection
vilation, e.g. MPU read/write. So the possible paramter
will be 0x02 | [0x4 | 0x8].
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Add SYS_POWER_ prefix to HAS_STATE_SLEEP_, HAS_STATE_DEEP_SLEEP_
options to align them with names of power states they control.
Following is a detailed list of string replacements used:
s/HAS_STATE_SLEEP_(\d)/HAS_SYS_POWER_STATE_SLEEP_$1/
s/HAS_STATE_DEEP_SLEEP_(\d)/HAS_SYS_POWER_STATE_DEEP_SLEEP_$1/
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
This commit cleans up names of system power management functions by
assuring that:
- all functions start with 'sys_pm_' prefix
- API functions which should not be exposed to the user start with '_'
- name of the function hints at its purpose
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
There exists SoCs, e.g. STM32L4, where one of the low power modes
reduces CPU frequency and supply voltage but does not stop the CPU. Such
power modes are currently not supported by Zephyr.
To facilitate adding support for such class of power modes in the future
and to ensure the naming convention makes it clear that the currently
supported power modes stop the CPU this commit renames Low Power States
to Slep States and updates the documentation.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Test case added for IPv6 neighbors. This will add more than
CONFIG_NET_IPV6_MAX_NEIGHBORS neighbors. Network stack should
remove oldest neighbor which is in STALE state and it should
add new neighbor. So call to net_ipv6_nbr_add() should succeed.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This patch checks the return value after updating the packet.
Fix Bugs: #14821
Coverity CID: 196635
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Coverity was complaining that this function was not being checked only
in a specific case.
Coverity CID: 183066
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The 14 individual cases that use these four config files are now
passing reliably when SMP is enabled, after the "Mark sleeping threads
suspended" scheduler fix. Turn it back on.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
For obvious performance reasons, scheduler state changes (other than
aborting a thread) do not cause synchronous interrupts on the other
CPU. Doing a k_thread_wakeup() means that the current CPU will run it
synchronously if it's high priority, but if you want to see it run on
the other cores you need to wait for them to reach a scheduling point
on their own.
The test was written to assume that k_thread_wakeup() is synchronous,
but that's not right, and it needs to spin a bit. This bug was always
present in the test, but masked by a bug in the way that k_sleep() was
handled on SMP. See #9506.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
A few more test cases that are measurably unreliable when run in SMP.
For the most part these work most of the time (though the semaphore
one was pretty borderline -- I measured about 25% failures), but are
measurably unstable against the backdrop of known qemu instability.
Something is clearly going on and we need to come back to these to fix
threadsafety issues.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Some places were still using the old allocator. Using the new one does
not change any behavior. This will help to remove the useless data_len
attribute in net_pkt which legacy allocator was still setting.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
And also to the relevant callbacks.
That parameter is not used anywhere so it is useless.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that legacy - and unrelated - function named net_pkt_get_data has
been removed, we can rename net_pkt_get_data_new relevantly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that legacy functions are removew, let's rename the new functions by
removing the _new suffix.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Add qemu_x86_64 to the platform whitelist so that this will actually
be built and tested with sanitycheck.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
There was a missing 'z_' renaming to
z_is_thread_prevented_from_running which would have caused
sanitycheck to fail but it is not being built at the moment.
Fix this first.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Most CPUs have instructions like LOCK, LDREX/STREX, etc which
allows for atomic operations without locking interrupts that
can be invoked from user mode without complication. They typically
use compiler builtin atomic operations, or custom assembly
to implement them.
However, some CPUs may lack these kinds of instructions, such
as Cortex-M0 or some ARC. They use these C-based atomic
operation implementations instead. Unfortunately these require
grabbing a spinlock to ensure proper concurrency with other
threads and ISRs. Hence, they will trigger an exception when
called from user mode.
For these platforms, which support user mode but not atomic
operation instructions, the atomic API has been exposed as
system calls.
Some of the implementations in atomic_c.c which can be instead
expressed in terms of other atomic operations have been removed.
The kernel test of atomic operations now runs in user mode to
prove that this works.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This test isn't SMP-safe and won't pass reliably on x86_64 by default
(though it does pass often enough to get CI passes on most things, it
fails spuriously in ways that aren't timing related). Turn off the
second CPU. Fixes#14501
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Refactors the apds9960 sensor driver to get the i2c device name, i2c
device address, gpio device name, and gpio pin from a constant device
configuration structure, rather than using hardcoded macros. This will
make it easier to change the names of the macros and to instantiate
multiple instances of the driver.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The current flash configurations for all nRF52840's in Zephyr is
VERY constrained when it comes to allowing samples any space for
storage or custom areas. It only leaves the last 4 pages of flash
for "storage".
The nRF52840 is also capable of using OpenThread which defaults
to using the last 4 pages of flash for storing OpenThread-related
network data.
This means that while using OpenThread under any configuration
designed to use mcuboot partition slots, there is no space left
over for storage of any kind.
Let's adjust the partition table to set storage at 8 pages of
flash (32k). This fixes the conflict with OpenThread and leaves
room for future use cases that may arise.
Signed-off-by: Michael Scott <mike@foundries.io>
Updated to add support for CS. DT config names updated
to adhere to the DTS naming convention. Init and SPI
configuration now follows the device datasheet.
Signed-off-by: Henrik Malvik Halvorsen <henrik.halvorsen@nordicsemi.no>
This moves BTP specification from Zephyr so that it's accessible for
all projects.
Related auto-pts PR: https://github.com/intel/auto-pts/pull/244
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
The old defines make the Shippable tests fail. Convert the fixing
ups for fxos8700 to use new defines introduced in #12491.
Signed-off-by: Song Qiang <songqiang1304521@gmail.com>
Remove magic numbers from Ethernet drivers and tests by defining
NET_ETH_MAX_DATAGRAM_SIZE and NET_ETH_MAX_FRAME_SIZE.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Don't depend on CONFIG_NET_SOCKETS_POSIX_NAMES being defined (e.g.,
it's going to conflict with POSIX API).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Qemu just can't handle 1000 Hz ticks. On our CI machines, CONFIG_HZ
on the host (which is the limit of timing precision for things like
idle wakeups and signal delivery, both of which qemu seems to use for
timing) is 250. When the mismatch gets this large, we start seeing
artifacts like interrupts being delivered "in the past" (i.e. code
sees a z_clock_elapsed() value of "2" ticks before getting a
z_clock_announce() call for "1").
As it happens, this test doesn't actually require timing with that
precision, it just wants "lots of context switching" to exercise the
threadsafety of the mem_pool APIs. So decrease the tick rate to the
100Hz default, but put a loop counter in the worker threads to force
them to do 10x more work, keeping the number of preemptions constant.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The existing device_set_power_state() API works only in synchronous
mode and this is not desirable for devices(ex: Gyro) which take
longer time (few 100 mSec) to suspend/resume.
To support async mode, a new callback argument is added to the API.
The device drivers can asynchronously suspend/resume and call the
callback function upon completion of the async request.
This commit adds the missing callback parameter to all the drivers
to make it compliant with the new API.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
If pkt allocation fails, then prepare to handle NULL pointer.
Coverity-CID: 195844
Fixes#14405
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We needed to add support for the RV32M1_LPTMR_TIMER to the test so its
knows what the IRQ of the timer is.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The various tests would all do a "wait for threads to exit" step
before checking the results, but this was implemented with a simple
busy wait that turns out to need careful tuning (because there was
busy waiting in the threads).
Rather than try to synchronize this, white box the issue (it's a low
level SMP test, after all) by spinning on the thread states directly
watching for the kernel to flag them dead. The downside here is that
if the process fails for some reason we'll get a hang and a timeout
reported from sanitycheck and not a synchronous ztest assertion. But
in return, successful tests run much faster and I don't need to worry
about how to tune them for IPI latency on different platforms.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This case was predicated on a mistake. The behavior of k_wakeup() has
always been NOT to wake up threads that are "pending" on a wait queue,
only ones blocked on a timeout in k_sleep(). As written, this test
case could never pass.
(Really there's no good reason for that. It seems reasonable to me to
expect wakeup to work symmetrically, and the docs are sort of
ambiguous on the subject. But the code in k_wakeup() is clear:
threads flagged pending get an early exit and the call becomes a
noop.)
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
There was a test-created thread that wasn't including this. It's a
huge stack and doesn't overflow (though I thought briefly that it
was), but it's a rule that we need to have that buffer and I'm trying
to fix these as I find them.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
If pkt allocation fails, then prepare to handle NULL pointer.
Coverity-CID: 195880
Coverity-CID: 195816
Fixes#14413Fixes#14395
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If pkt allocation fails, then prepare to handle NULL pointer.
Coverity-CID: 195835
Fixes#14409
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove use of select to "force" enabling other configs in subsys/fs
and subsys/net/l2. The forcing will cause infinite kconfig recursion.
Signed-off-by: Thomas Stenersen <thomas.stenersen@nordicsemi.no>
Update reserved function names starting with one underscore, replacing
them as follows:
'_k_' with 'z_'
'_K_' with 'Z_'
'_handler_' with 'z_handl_'
'_Cstart' with 'z_cstart'
'_Swap' with 'z_swap'
This renaming is done on both global and those static function names
in kernel/include and include/. Other static function names in kernel/
are renamed by removing the leading underscore. Other function names
not starting with any prefix listed above are renamed starting with
a 'z_' or 'Z_' prefix.
Function names starting with two or three leading underscores are not
automatcally renamed since these names will collide with the variants
with two or three leading underscores.
Various generator scripts have also been updated as well as perf,
linker and usb files. These are
drivers/serial/uart_handlers.c
include/linker/kobject-text.ld
kernel/include/syscall_handler.h
scripts/gen_kobject_list.py
scripts/gen_syscall_header.py
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
If the rc = -EAGAIN from mqtt_read_publich_payload(), it shouldn't be
used in memcpy() since it is a negative value, and instead, it should
try to read again.
Fix: #13825
Coverity-CID: 191002
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Ram back-end was unnecessary included in non qemu test which
increased RAM footprint much.
Patch includes ram backend into build only for qemu_x86 build.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Use the new net_pkt allocator. Fix a small leak in the test as well.
No need to build the net_pkt, just send the data directly through
net_context_sendto_new()
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The very first test was basically testing the checksum calculation. And
that's already tested in more relevant tests. It was also trying in a
cumbersome way to generate packets scattered over many net_buf. But
that's also already tested in various other tests, and it's not at all
part of core utils anyway.
In any case, that all redundant, so let's remove it.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
No need to build the net_pkt, just send the data directly through
net_context_sendto_new()
Use the new net_context option to enable timestamping of outgoing
packet (NET_CONTEXT_TIMESTAMP).
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Just a quick rm/mv. The new API is going to be the only one, so legacy
test can disappear.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
No need to build the net_pkt, just send the data directly through
net_context_sendto_new()
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
s/0/K_NO_WAIT for all timeouts
And fix tcp context connect call (it's not net_context_listen obviously,
and one parameter was missing).
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
No need to build the net_pkt, just send the data directly through
net_context_sendto_new()
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
We use to define the SPI bus device name in Kconfig, however now that
all SPI bus controllers use DTS that comes from DTS, so SPI_1_NAME is
never set to anything. So remove it and leave it to the config frag in
the boards dir in the test to set the name.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Minnowboard should not run the XIP test as it doesn't execute-in-place.
Updated the test specification to exclude Minnowboard.
Fixes#14099.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The heap, plus a few globals relevant to mbedtls get put in
their own memory partition.
With systems that have power-of-two region size/alignment
constraints, this results in a 64K partition being created,
even though we are using just a whisker above 32K.
Lower the heap size a little so everything fits in 32K.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Fix multiple definitions of `ram_console'. The ram_console
array is already defined in drivers/console/ram_console.c.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
If peer socket closed, the other side should get 0 from recv(), and
should get in stable manner (no matter how much time went from the
closure and/or how many times recv() is called).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Fix issue reported by coverity regarding using volatile
variables in zassert_equal macro.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Fix issue reported by coverity regarding using volatile variable
in zassert_equal macro.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
net_pkt_alloc_with_buffer() takes IP header and protocol header
length while calculating total length internally. Need not
specify explicitly. Also mutex was not properly initialized.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The mbedtls library has some globals which results in faults
when user mode tries to access them.
Instantiate a memory partition for mbedtls's globals.
The linker will place all globals found by building this
library into this partition.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We were reporting results twice, something that might confuse test
systems and end up reporting wrong results. Assert if any self-tests
have failed and report at the very end.
Disable test on x86_64.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
These tests fail on hardware. An appropriate issue will be filed on
GitHub, but it doesn't make sense to hold the CI from going green.
Fixes#13960.
Signed-off-by: Piotr Zierhoffer <pzierhoffer@antmicro.com>
It was possible via Kconfig to assign any partition for FCB using
its number. Partitions flash_area_id becomes non predefined
(are auto-generated). So it is possible only to guess which
number will be signed to certain area.
Unfortunately it is not possible to transfer FLASH_AREA_XXX_ID
label via Kconfig.
Patch assigns settings to the storage partition and remove
SETTINGS_FCB_FLASH_AREA property from settings Kconfig.
fixes#13388
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
This part of tests was forgotten when we move to subsys/
Fixes#13729
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This patch adds overlay for nrf52_pca10040 and reel board to use
btp tester. These are based on nrf52840.
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
We want to show that performing various memory domain
operations, and then either dropping to user mode, or
swapping to a user thread in the same domain, has the
correct memory policy for the user context.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The reftime variable used for performance numbers is not initialized
prior to being used. Initialize it to the current uptime so delta
can be calculated correctly.
Fixes#13877
Fixes CID-190936
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Inside test_file_truncate(), the results of fs_seek() are not
checked. So adds some checks there.
Fixes#13874
Fixes CID-190939
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Exactly one caller of pthread_barrier_wait() should receive a return
value of PTHREAD_BARRIER_SERIAL_WAIT; all others should receive zero
(or an error code). Added a test to match.
Fixes: #9953
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Removing the build_only option for tickless broke CI (for reasons
unrelated to the new tests I added in the prior commit).
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
In some circumstances (e.g., a tickless kernel), k_timer_remaining_get()
would not account for time passed that didn't involve clock interrupts.
This adds a simple fix for that, and adds a test case. In addition, the
return value of k_timer_remaining_get() is clamped at 0 in the case of
overdue timers and the API description is adjusted to reflect this.
Fixes: #13353
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This test was written to wait on a fifo with a timeout, return, and
check the timing between the start and end using k_cycle_get_32() to
see that it didn't run long. But timeouts expire on tick boundaries,
and so if tick expires between the start of the test and the entry to
k_fifo_get(), the timeout will take one full tick longer than expected
due to aliasing.
As it happened this passed everywhere except nRF (whose cycle timer is
32 kHz and thus more susceptible to coarser aliasing like this), and
even there it passed for a while until the spinlock validation layer
went in and added just enough time to the userspace code paths
(i.e. the code between the start time fetch and the point where the
fifo blocks takes longer) to open the window and push us over the
limit.
The workaround here is just to add a k_sleep(1) call, which is
guaranteed to block and wake up synchronously at the next tick.
Fixes#13289
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Checking the return of fs_stat to ensure that there is not hidden error.
Problem spotted by coverity.
CID 190949
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Port all users of 'set_conf_file' to use the built-in rules
instead. This follows the convention-over-configuration principle to
make the system as a whole simpler and more consistent.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The return of hwinfo_get_device_id is a signed size and it returns a
negative number in case of error. This test was using an unsigned
variable invalidating the errror check.
CID 190929
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
(Chunk 2 of 3 - this patch was split across pull requests to address
CI build time limitations)
Zephyr has always been a uniprocessor system, and its kernel tests are
rife with assumptions and outright dependence on single-CPU operation
(for example: "low priority threads will never run until this high
priority thread blocks" -- not true if there's another processor to
run it!)
About 1/3 of our tests fail right now on x86_64 when dual processor
operation is made default. Most of those can probably be recovered on
a case-by-case basis with simple changes (and a few of them might
represent real bugs in SMP!), but for now let's make sure the full
test suite passes by turning the second CPU off. There's still plenty
of SMP coverage in the remaining cases.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This commit removes the #ifdefs for ARM platforms in
tests/kernel/fatal/main.c, as all the tests suite can be
executed for platforms supporting the ARM and the NXP MPU.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Commit 0cc362f873 ("tests/kernel: Simplify timer spinning") was
added to work around a qemu bug with dropped interrupts on x86_64.
But it turns out that the tick alignment that the original
implementation provided (fundamentally, it spins waiting on the timer
driver to report tick changes) was needed for correct operation on
nRF52.
The effectively revert that commit (and refactors all the spinning
into a single utility) and replaces it with a workaround targeted to
qemu on x86_64 only. Fixes#11721
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
(Chunk 1 of 3 - this patch was split across pull requests to address
CI build time limitations)
Zephyr has always been a uniprocessor system, and its kernel tests are
rife with assumptions and outright dependence on single-CPU operation
(for example: "low priority threads will never run until this high
priority thread blocks" -- not true if there's another processor to
run it!)
About 1/3 of our tests fail right now on x86_64 when dual processor
operation is made default. Most of those can probably be recovered on
a case-by-case basis with simple changes (and a few of them might
represent real bugs in SMP!), but for now let's make sure the full
test suite passes by turning the second CPU off. There's still plenty
of SMP coverage in the remaining cases.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
MISRA rules (see #9892) forbid alloca() and family, even though those
features can be valuable performance and memory size optimizations
useful to Zephyr.
Introduce a MISRA_SANE kconfig, which when true enables a gcc error
condition whenever a variable length array is used.
When enabled, the mempool code will use a theoretical-maximum array
size on the stack instead of one tailored to the current pool
configuration.
The rbtree code will do similarly, but because the theoretical maximum
is quite a bit larger (236 bytes on 32 bit platforms) the array is
placed into struct rbtree instead so it can live in static data (and
also so I don't have to go and retune all the test stack sizes!).
Current code only uses at most two of these (one in the scheduler when
SCHED_SCALABLE is selected, and one for dynamic kernel objects when
USERSPACE and DYNAMIC_OBJECTS are set).
This tunable is false by default, but is selected in a single test (a
subcase of tests/kernel/common) for coverage. Note that the I2C and
SPI subsystems contain uncorrected VLAs, so a few platforms need to be
blacklisted with a filter.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This commit extends the arm_irq_vector_table test,
so it can run successfully in nRF9160-based platforms.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit adds the Clock Control Interrupt Service
Routine into the customized vector table, when building
for nRF52X-based platforms. As a result, the interrupts
generated by the clock control will not interfere with
the test.
Fixes#13823.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Minor typo and style fixes in the test logging, stressing
that the test is applicable for Cortex-M MCUs, in general.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
In order to make this test easy to extend for additional
Cortex-M-based platforms, we apply the following minor
refactoring to the test:
- we introduce the _ISR_OFFSET macro to denote the offset
inside the interrupts' vector table (starting from IRQ
line 0) of the first manually installed ISR.
- we move the asserts that ensure the validity of the custom
vector table to build-time and place them in the beginning
of the text, outside source code.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
(Chunk 3 of 3 - this patch was split across pull requests to address
CI build time limitations)
Zephyr has always been a uniprocessor system, and its kernel tests are
rife with assumptions and outright dependence on single-CPU operation
(for example: "low priority threads will never run until this high
priority thread blocks" -- not true if there's another processor to
run it!)
About 1/3 of our tests fail right now on x86_64 when dual processor
operation is made default. Most of those can probably be recovered on
a case-by-case basis with simple changes (and a few of them might
represent real bugs in SMP!), but for now let's make sure the full
test suite passes by turning the second CPU off. There's still plenty
of SMP coverage in the remaining cases.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The qmsi rtc hardware supports a single alarm only and a fixed top
value, so restructure the counter_basic_api test to skip unsupported
features.
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
This makes use of BT_GATT_CCC_MANAGED so instead of having a custom
attribute which is not managed by stack.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
patch exclude the watchdog test case for quark_d2000_crb
,as it seen that upon watchdog reset the conents of ram are lost.
Hence the existing testcase fails.
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
Reworked platform_whitelist to enable the "test kernel.device" for
qemu_x86_64
kernel.device.pm is not yet enabled for qemu_x86_64 because
there is a link error
undefined symbol `_DEVICE_STRUCT_SIZEOF'
referenced in expression
Signed-off-by: Cinly Ooi <cinly.ooi@intel.com>
Add a build variant of the posix tests with newlib enabled. Since the
interation of posix is greatly related to the libc we should have these
tests build with and without newlib support.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The intent of this Kconfig is to allow libc stdout
functions like printf() to send their output to the
active console driver instead of discarding it.
This somehow evolved into preferring to use
printf() instead of printk() for all test case output
if enabled. Libc printf() implementation for both
minimal libc and newlib use considerably more stack
space than printk(), with nothing gained by using
them.
Remove all instances where we are conditionally
sending test case output based on this config, enable
it by default, and adjust a few tests that disabled
this because they were blowing stack.
printk() and vprintk() now work as expected for
unit_testing targets, they are just wrappers for
host printf().
Fixes: #13701
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
CPU_LPS_n name used to indicate a low power state is cryptic and
incorrect. The low power states act on the whole SoC and not exclusively
on the CPU. This patch renames CPU_LPS_n states to LOW_POWER_n. Also
HAS_ pattern for Kconfig options is used in favor of a non standard
_SUPPORTED. Naming of deep sleep states was adjusted accordingly.
Following is a detailed list of string replacements used:
s/SYS_POWER_STATE_CPU_LPS_(\d)_SUPPORTED/HAS_STATE_LOW_POWER_$1/
s/SYS_POWER_STATE_CPU_LPS_(\d)/SYS_POWER_STATE_LOW_POWER_$1/
s/SYS_POWER_STATE_DEEP_SLEEP_(\d)_SUPPORTED/HAS_STATE_DEEP_SLEEP_$1/
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
This commit removes dependency on SYS_POWER_LOW_POWER_STATES_SUPPORTED,
SYS_POWER_DEEP_SLEEP_STATES_SUPPORTED Kconfig options. Power management
SYS_POWER_LOW_POWER_STATES, SYS_POWER_DEEP_SLEEP_STATES options depend
now directly on specific power states supported by the given SoC. This
simplifies maintenance of SoC Kconfig files.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Follow the pattern we have for other peripherals in that if the driver
class (CAN) is enabled than enable the driver for that class
(CAN_STM32). Also have the STM32 CAN driver depend on being on a STM32
SoC.
Remove setting of CONFIG_CAN_STM32 in any .conf files as it will get set
of CONFIG_CAN is set/enabled.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The name of the CAN message and filter was changed so this
needs to be changed too here.
Fixes#13716
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This test is breaking CI, we need a fix first before we go and enable
tests.
This reverts commit dc39a9adcf.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add a build variant of the posix tests with newlib enabled. Since the
interation of posix is greatly related to the libc we should have these
tests build with and without newlib support.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
- differentiating actual "fragment" to buffer element from a net_pkt
- instead of copying data (and thus allocating buffer) let's just take
the fragment buffer and put it into result packet.
- fixing compilation issue in relevant test
It's more efficient that way, as we use already allocated fragment
buffer instead of reallocating/deallocating after each fragment
reception.
A possible optimization would be to calculate the actual size + header
difference if only the actual size is close to the target size.
It would avoid to get a dry run of the header decompression for each
fragment received. The difficulty being in finding the sweet spot when
it is relevant to calculate the header difference.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is an integral part of userspace and cannot be used
on its own. Fold into the main userspace configuration.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Test was failing on nios2 with:
../app/libapp.a(test_stack_contexts.c.obj): in function `tstack_pop':
/home/galak/git/zephyr/tests/kernel/stack/stack_api/src/test_stack_contexts.c:31:
warning: unable to reach (null) (at 0x004002f4) from the global pointer
(at 0x004082fc) because the offset (-32776) is out of the allowed range,
-32678 to 32767
Fixes#13595
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit fixes a test in kernel/mem_protect/userspace,
which was attempting to read from an address that was not
necessarily within the image memory range, causing faults
in ARM TrustZone-enabled builds.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
For now we are disabling support for POSIX lib on native posix arch. We
need to cleanup and support POSIX lib cleanly for hardware targets.
Once that is working properly we can look to support the feature on
native posix arch.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Move test related code and the testsuite away from tests/ and make it a
proper subsystem.
The way tests were integrate in the tree was not obvious and actual
tests were intermixed with the testsuite code.
This will allow us to have trees with the testcode and without the
samples by just remove the folders tests/ and samples, needed for
isolating actual code from test/sample code.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In order to follow the naming from Linux, change the name of
can_msg to zcan_frame, and can_msg_filter to zcan_filter.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that can_copy_*() functions work as expected.
These functions are used by SocketCAN support.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
settings_line_len_calc() calculates only setting record
payload size, not record layout in flash size.
this patch remove inadequate test for this function.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Added test for check whether value lenght is properly
stored for unaligned settings record size.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
For improved precision of high speed PWMs, the new
function will allow you to specify period and pulse
at the nanosecond resolution.
Signed-off-by: Nicholas Lowell <nlowell@lexmark.com>
Fix array overrun issue by limiting the array
index to the maximum possible string length.
Coverity CID: 190624
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Macros are replaced by C++ friendly versions:
- SHELL_CREATE_STATIC_SUBCMD_SET by SHELL_STATIC_SUBCMD_SET_CREATE
- SHELL_CREATE_DYNAMIC_CMD by SHELL_DYNAMIC_CMD_CREATE
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
It is planned to deprecate SHELL_CREATE_STATIC_SUBCMD_SET macro
which is replaced by SHELL_STATIC_SUBCMD_SET_CREATE.
Additionally, removed irrelevant comments about alphabetical
ordering which is no longer needed.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This commit disables system-level power management in the device power
management test as it is not used.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Some of power states used numerical suffix while otthers not.
This commit adds proper suffix to all power state names.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
f
This commit simplifies OS <-> Application interface controlling power
management. In the previous approach application-based PM required
overriding sys_suspend() and sys_resume() functions. As these functions
actually implemented power state change, in such case application
basically had to provide own implementation of all PM-related stuff,
which was not portable and hard to maintain.
This commit changes this scheme: The sys_suspend() and sys_resume()
are now system functions while the application could either use
built-in power management policies or provide its own. All details
of power mode switching are now handled by the OS.
Also, this commit cleans up the Kconfig options related to system-level
power management grouping them under common CONFIG_SYS_PM_ prefix.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Since malloc takes a size_t, we should use 0x7fffffff as the max size
(ie what the larget unsigned int) would normall be. Newer newlib's have
a check that will fail building since 0xf0000000 exceeds the size.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This app was supposed to have userspace disabled, but it kept on being
forced on by CONFIG_TEST_USERSPACE (which in turn gets enabled by
CONFIG_TEST).
Also lower the shell stack size since stack analysis shows over 700
bytes being unused.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Change connection parameters and channel map after connection is
established. Test encrypted connection also with split stack. Tighten
pass/fail criteria.
Signed-off-by: Wolfgang Puffitsch <wopu@oticon.com>
We weren't testing whether stack overflows in user mode
were correctly reported.
A more aggressive stack overflow logic is enabled if
HW-based stack overflow detection is enabled.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
There are issues using lowercase min and max macros when compiling a C++
application with a third-party toolchain such as GNU ARM Embedded when
using some STL headers i.e. <chrono>.
This is because there are actual C++ functions called min and max
defined in some of the STL headers and these macros interfere with them.
By changing the macros to UPPERCASE, which is consistent with almost all
other pre-processor macros this naming conflict is avoided.
All files that use these macros have been updated.
Signed-off-by: Carlos Stuart <carlosstuart1970@gmail.com>
Upon hard/soft irq or exception entry/exit, handle transitions
off or onto the trampoline stack, which is the only stack that
can be used on the kernel side when the shadow page table
is active. We swap page tables when on this stack.
Adjustments to page tables are now as follows:
- Any adjustments for stack memory access now are always done
to the user page tables
- Any adjustments for memory domains are now always done to
the user page tables
- With KPTI, resetting a page now clears the present bit
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Tests were failing because:
1. `alarm_cnt` was not reset before the test.
2. one test was failing because it was expecting that setting
`top_value` for channel_alarm is too high value but in fact
it is accepted and `top_value+1` is too much.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Now that the stack uses the new API from net_pkt for pulling, no need
to keep the legacy one around.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that legacy net_pkt_clone function has been removed, the new
function can be renamed accordingly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that the stack uses the new API from net_pkt for copying, no need
to keep the legacy one around.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that legacy net_pkt_clone function has been removed, the new
function can be renamed accordingly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
And remove the parameter "full" as there is no "ll reserve" distinction
anymore. The parameter was unused since the ll reserve concept removal.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It is now useless and can be replaced by net_udp_get_hdr() directly, in
the 2 unit tests it was used.
Removing as well the dbg function too_short_msg()
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Let's use the new API for these 2 functions. Note that in some places,
using these functions is under-optimized (like in llmnr-responder in
dns: it gets the ip/udp headers already from the recv callback. That
will need to be taken care of later).
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
net_pkt_tcp_data was only used in tcp unit test and could be replaced by
local net_tcp_get_hdr.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This function is only used in sockets, thus making it a private function
of socket library and renaming it relevantly.
Note that sockets should be reviewed at some point to avoid using such
function: zsock_received_cb() already get the ip header and the protocol
header, so it could grab the src addr/port from there. It would be way
more optimized to do so, since net_pkt_get_src_addr is costly as it
parses all over again the ip/protocol headers.
utils unit test is updated and the test of the former
net_pkt_get_src_addr/net_pkt_get_dst_addr are removed.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The test assumes that the last to IRQ number will be free, this isn't a
valid assumption and now that we detect multiple ISRs registering for
the some IRQ line, we see failures because of this assumption on some
platforms. Exclude those platforms from this test for the time being.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit adds specific stm32 CAN driver testing.
The test covers filter handling.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Nios2 platform was disabled due to compilation error. Meanwhile,
issue has been solved and tests can be re-enabled.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The SYS_POWER_LOW_POWER_STATE_SUPPORTED and SYS_POWER_LOW_POWER_STATE
suggests one low power state but these options control multiple
low power state. This commit uses plural in the names to indicate
that.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The following symbols don't exist so remove them from prj_virtual.conf:
CONFIG_I2C_EEPROM_SLAVE_0_CONTROLLER_DEV_NAME
CONFIG_I2C_EEPROM_SLAVE_1_CONTROLLER_DEV_NAME
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
HAS_COVERAGE_SUPPORT can be set both on boards with enough RAM to
store the coverage results, or for POSIX ARCH based ones
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Since this is a test dedicated to Intel S1000 CRB,
use the I2C0 device name directly instead of a Device Tree or
Kconfig defined device name.
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
Update DMA tests according to dma_cavs implementation of
single block transfers. Multiple block transfers are achieved
by reloading DMA upon every DMA completion.
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
The code has been using non DT_ prefixed defines for DT generated
defines. Switch to use DT_ prefixed ones as we want to deprecated
the non DT_ prefixed defines.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This patch adds a JSON web token library that adds the capability
to sign JSON tokens. This was located in subsys due to the dependency
on MBEDTLS, which resides in /ext.
Signed-off-by: David Brown <david.brown@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Add support to STM LIS2DW12 3-axis accelerometer driver.
The driver support I2C and SPI bus communication and both
polling and drdy trigger mode.
Co-authored-by: Mario Tesi <mario.tesi@st.com>
Signed-off-by: Armando Visconti <armando.visconti@st.com>
The new spinlock validation features combined with spinlockification
have increased stack usage a bit in CONFIG_ASSERT builds, but this is
a good feature we want to keep. This test was bumping into limits, so
increase the size from 512 to 640 bytes.
Unfortunately, this is also a huge test that creates a LOT of those
stacks across different test cases, so that minor bump blows us past
the 64k SRAM limit on a bunch of boards. So unify all those stacks
that are only ever used in one case at a time so the memory can be
shared. Now there's one fixed stack, named "tstack", and one array
"tstacks". Much smaller.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
These functions, for good design reason, take a locking key to
atomically release along with the context swtich. But there's still a
common pattern in code to do a switch unconditionally by passing
irq_lock() directly. On SMP that's a little hurtful as it spams the
global lock. Provide an _unlocked() variant for
_Swap/_reschedule/_pend_curr for simplicity and efficiency.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Just like with _Swap(), we need two variants of these utilities which
can atomically release a lock and context switch. The naming shifts
(for byte count reasons) to _reschedule/_pend_curr, and both have an
_irqlock variant which takes the traditional locking.
Just refactoring. No logic changes.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
We want a _Swap() variant that can atomically release/restore a
spinlock state in addition to the legacy irqlock. The function as it
was is now named "_Swap_irqlock()", while _Swap() now refers to a
spinlock and takes two arguments. The former will be going away once
existing users (not that many! Swap() is an internal API, and the
long port away from legacy irqlocking is going to be happening mostly
in drivers) are ported to spinlocks.
Obviously on uniprocessor setups, these produce identical code. But
SMP requires that the correct API be used to maintain the global lock.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This test seems to be fine in the current master, but doing
development, it easily starts to overflow RAM of some boards and/or
crash due to stack checks. So, decrease the ramdisk (the biggest
eater of RAM here) from default 96K to 80K, and bump main stack
size proactively.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Implemented tests for the new join and detach features.
- The first tests multiple join operations.
- The second tests trying to join a detached thread.
- The third tests abandoning a join when the thread is detached after
creation.
Signed-off-by: Carlos Stuart <carlosstuart1970@gmail.com>
This implements the Database Hash characteristic which generates a hash
with the contents of certain attributes. The generation of hash is
usually offloaded to the systemwq using a delayed work so that when
application register multiple services only one hash needs to be
calculated.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Patch introduces flash_map subsystem to operate on flash
image instead of direct operation using flash_driver API.
Changes allows to support operation on the image in any flash
device.
flash_map was not available when this subsystem was introduced.
Signed-off-by: Findlay Feng <i@fengch.me>
Patch introduces flash_map subsystem to operate on flash
footprint instead of direct operation using flash_driver API.
Flash area ID is used in API instead of direct flash-bank-offsets.
Changes allows to support operation on the partition in any flash
device.
flash_map was not available when this subsystem was introduced.
Signed-off-by: Findlay Feng <i@fengch.me>
The power management framework used two different abstractions
to describe power states. The SYS_PM_* given coarse information
what kind of power state (low power or deep sleep) was used,
while the SYS_POWER_STATE_* abstraction provided information
about particular power mode.
This commit removes the SYS_PM_* abstraction as the same
information is already carried in SYS_POWER_STATE_*.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Default to the PWM0 channel 2, as it is the only one available in a
non-inverted form on the EXT1 and EXT2 connectors. That way the measured
voltages match the expected ones.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The DAD was failing because we received the DAD network packet
even when should not had received it. Fix it by discarding all
the ICMPv6 NS packets that we receive.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The packet can be referenced somewhere else and letting the newly added
L2 header will generate corrupt packet. If the same packet is being
resent, ethernet will add again its L2 header. Thus the need to remove
such L2 header every time a packet has been sent, successfully or not.
Fixes#12560
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This was never a long-term solution, more of a gross hack
to get test cases working until we could figure out a good
end-to-end solution for memory domains that generated
appropriate linker sections. Now that we have this with
the app shared memory feature, and have converted all tests
to remove it, delete this feature.
To date all userspace APIs have been tagged as 'experimental'
which sidesteps deprecation policies.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
CONFIG_APPLICATION_MEMORY was a stopgap feature that is
being removed from the kernel. Convert tests and samples
to use the application shared memory feature instead,
in most cases using the domain set up by ztest.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
* Newlib now defines a special z_newlib_partition containing
all globals relevant to newlib. Most of these are in libc.a
with a heap tracking variable in newlib's hooks.
* Both C libraries now expose a k_mem_partition containing the
bounds of the malloc heap arena. Threads that want to use
libc malloc() will need to add this to their memory domain.
* z_newlib_get_heap_bounds has been removed, in favor of the
memory partition for the heap arena
* ztest now includes the C library partitions in its memory
domain.
* The mem_alloc test now runs in user mode to prove that this
all works for both C libraries.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
If CONFIG_APP_SHARED_MEM is enabled, ztest will set up a
default memory domain with a single partition on startup.
Test case globals may be added to the partition via
ZTEST_BMEM/ZTEST_DMEM macros, add their own partitions,
or leave the domain and join another one.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Some tests instantiate a lot of thread objects. These
were not tagged with __kernel, and
CONFIG_APPLICATION_MEMORY was enabled, so the kernel was
not adding them to the kernel object database.
However, with CONFIG_APPLICATION_MEMORY disabled, this
overflowed the default max number of thread objects (16).
Increase the max to 32 for these particular tests.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We want CONFIG_APPLICATION_MEMORY specifically disabled
for this test, but it was being transitively selected by
CONFIG_TEST_USERSPACE which defaults to on for CONFIG_TEST.
Turn it off so that disabling application memory in the
config actually has an effect.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Fixed typo: CONFIG_NET_NET_PKT_LOG_LEVEL_DBG, removed extra _NET.
Removed debug macro CONFIG_NET_DEBUG_NET_PKT that is not used.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
The function to set channel alarm is called counter_set_channel_alarm.
To match the name of the function performing the reverse operation this
commit renames counter_disable_channel_alarm() function to
counter_cancel_channel_alarm().
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Interrupts default to trigger on level for historical reasons, so use of
GPIO_INT_LEVEL` as a mask results in a zero value. Use a mask macro to
isolate the trigger configuration.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Update counter_basic_api test to support STM32 RTC counter.
Add device to list and skipp not supported test cases.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Enable testing of counter (COUNTER_{D}TMR_CMSDK) on mps2_an385 and
enable timers on v2m_beetle (TIMER_{D}TMR_CMSDK).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Enables debug logging in the counter_basic_api test. Fixes a build error
in the nrf counter drivers when logging is enabled.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The mcux rtc hardware supports a single alarm only and a fixed top
value, so restructure the counter_basic_api test to skip unsupported
features.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Tests i.MX EPIT timer peripheral driver. Since it supports zero number
of channel alarms, some tests had to be adjusted to look at the
number of channel alarms supported first.
Signed-off-by: Stanislav Poboril <stanislav.poboril@nxp.com>
Renamed:
- counter_set_wrap to counter_set_top_value
- counter_get_wrap to counter_get_top_value
- counter_get_max_wrap to counter_get_max_top_value
Updated nRF implementations and counter test.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Modify alarm callback to return user_data and channel_id.
Set_alarm and disable_alarm updated accordingly. Renamed
counter_*_ch_alarm to counter_*_channel_alarm. Updated test
and nrf implementations.
Updated doxygen comments.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Using `COUNTER_2_NAME` when all other properties are
`COUNTER_TIMER2_foo` is confusing. Make the names consistent.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
RTC1 (not RTC0) is excluded because it is used as the system clock.
Also document that TIMER0 and RTC0 may be rejected when CONFIG_BT_LL_SW
is enabled.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
The test assumes that the last to IRQ numbers will be free, this isn't a
valid assumption and now that we detect multiple ISRs registering for
the some IRQ line, we see failures because of this assumption on some
platforms. Exclude those platforms from this test for the time being.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Set Kconfig symbol SETTINGS_FCB_FLASH_AREA based on the
DT_FLASH_AREA_<FOO>_ID define instead of being hard coded.
We replace 3 with DT_FLASH_AREA_IMAGE_SCRATCH_ID and
we replace 4 with DT_FLASH_AREA_STORAGE_ID.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
After addition of flash_map auto-generation it is needed to
use generated flas_area name instead of hard-code.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The test had hard coded address family with value 4. This test
was failing as we have now AF_CAN family with value 4. Use 99
as an invalid address family value instead.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As we are adding more protocol families and protocol types
to connection handlers, some values might be same across
different types. Current connection handler only stores
proto type to match the handler, which is not enough if
we add more types. Also combination of family and types
may vary too. So adding family to connection handler to
figure out best match.
Also changing proto variable in net_conn from u8_t to u16_t.
net_context has 16 bit proto.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
After including native_posix USB controller we can perform some simple
tests on native_posix.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Added a set of tests that use the default thread stacks to ensure they
work the same as the passed in stacks. Abstracted the common
functionality into functions.
Signed-off-by: Carlos Stuart <carlosstuart1970@gmail.com>
Implemented a second set of memory pool tests that function on a
dynamically allocated memory pool. Abstracted some of the common
functionality to a common function.
Signed-off-by: Carlos Stuart <carlosstuart1970@gmail.com>
PAE tables introduce the NX bit which is very desirable
from a security perspetive, back in 1995.
PAE tables are larger, but we are not targeting x86 memory
protection for RAM constrained devices.
Remove the old style 32-bit tables to make the x86 port
easier to maintain.
Renamed some verbosely named data structures, and fixed
incorrect number of entries for the page directory
pointer table.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Those are outdated and unrunnable tests that require lots of
customization to keep them building and the information they provide
can't be retrieved in other means.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The iterator over registered callbacks failed to account for the
possibility that the callback would remove itself from the list. If
this occurred any remaining callbacks would no longer be reachable from
the node. Switch to the slist iterator that is safe for self-removal.
Note that the slist API remains unsafe for removal of subsequent nodes.
Even with the corrected code removal of the next callback registration
(cached in tmp) will result in it being called anyway, with the
remaining unremoved registrations not being called. If the next
callback were removed and re-registered on a different device, the
callbacks would be invoked for the wrong device.
Resolve this by a documentation change describing the conditions under
which a change to callback registration from within a callback are
permitted. Add a similar note regarding the effect of adding a
callback. The current event invocation behavior for callbacks added
within an event is explicitly left unspecified, though in the current
slist implementation newly added callbacks will not be invoked until the
next event.
Closes#10186
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
As the legacy library has been removed, we no longer need to
differentiate betwen MQTT implementations. Therefore align the library
folder name with other libraries and remove the `_sock` suffix.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Include the HCI Mesh Extension implementation to be built in
CI. Note, mesh extension implementation is work in progress,
and will be continues in new LL split architecture
implementations.
Note, HCI Mesh extensions not supported in ULL/LLL arch yet,
hence disabled. Also, only a partial implementation present
in the old architecture.
Relates to #12860.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Include building the init tests with the new Link Layer
split architecture and with debug options to cover
possible conditional compilations.
Relates to #12860.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit moves the definition of IRQ_LINE(..) macro from
interrupt.h into nested_irq.c, and adds some inline comments
documenting the use of it.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
As we are removing net_app and net_pkt based libraries and
applications, CoAP legacy based libraries and apps are moved
to socket based implementations. So removing legacy CoAP.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
As written originally, the tests assumed that if k_uptime_get_32()
returns times in milliseconds, that it also has millisecond
resolution. That however doesn't have to be the case, and indeed,
default timer interrupt period used by Zephyr is 10ms, and so system
time is incremented in such units. So, instead of "<= 1" tests to
account for timing increment, use "<= FUZZ".
For blocking tests, increase the timeout from previously used 10ms,
so we can reliably tests delays under the conditions described.
Also, enable CONFIG_QEMU_TICKLESS_WORKAROUND. Most other
timing-related tests have this enabled, and it may affect
stability of QEMU testing too.
Fixes: #12994
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This commit adds support for device id shell command.
Example:
uart:~$ hwinfo devid
Length: 12
ID: 0x1b0320d51485330313420
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
In case of Ethernet, if the requested size is larger than MTU and if
AF_UNSPEC is provided, the allocator will need to take into account
the ethernet header size which is not accounted in the MTU.
Other current L2 do not follow that rule as their MTU is based on IP
one (IPv6 most of the time). What they declare as MTU is the full frame
size they handle (minus the FCS for instance in 15.4). So with
AF_UNSPEC, such assumption on L2 header size is unrelevant.
(On 15.4 the header size is variable anyway and cannot be known until
the frame is parsed).
Fixes#12982
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Very simple test for thread CPU masks. While this is a SMP feature,
the implementation doesn't actually depend on SMP so we can test it
right here in the thread_apis test.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
STM32 watchdog driver does not support callback which is not expected
by the test. Update to make test able to run on STM32 drivers.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This allows to place instances of the class one after another in the
linker section.
Fixes#12908
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
USB relies on descriptors and configuration data allocations in
specific sections. This simple test verifies that at least size of the
data is correct.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The sys_dlist_insert_*() functions had a behavior where a NULL
argument for the insertion position to sys_dlist_insert_after/before()
was interpreted as "the end of the list". We never used that
convention (except in one spot internal to dlist.h which was not
itself used anywhere), and of course already have an API for appending
and prepending to a list.
In practice this was a performance disaster. The NULL check is
virtually never provable statically by the compiler, so that test and
branch is present always. And worse, the check and call to another
function was pushing this beyond the complexity limit for gcc to
inline a function (at -Os optimization anyway), forcing us to use
function calls for what should be a ~8 instruction sequence. The
upshot is that dlist insertions were 2-3x slower than they needed to
be.
Deprecate these older APIs and introduce a new sys_dlist_insert() call
which can be much better optimized.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Useful tool for performance work that removes interaction with other
APIs and thread state. The best part is that it doesn't rely on timer
interrupt delivery and so works with -icount even on existing qemu
versions and produces deterministic output.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
If status is 0, both ip_hdr and proto_hdr will own a pointer to the
relevant IP and Protocol headers. In order to know which of ipv4/ipv6
and udp/tcp one will need to use respectively net_pkt_family(pkt) and
net_context_get_ip_proto(context).
Having access to those headers directly, many callbacks will not need
to parse the packet again no get the src/dst addresses or the src/dst
ports. This will be change after this commit.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Though these are currently used by the core only, it will be then used
by net_context as well. This one of the steps to get rid of net_pkt's
appdata/appdatalen attributes.
Also normalizing all ip/proto parameters name to ip_hdr and proto_hdr.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This goes through basic allocation, atomic read/write, data
getter/setter and cloning/copying.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The test counts the '\0' of the data copied, though it does not belong
to the packet.
Since the test by-passes net_ipv6_input, which would update the packet
length according to what is in the IPv6 header, the checksum calculation
fails.
Before, checksum calculation used to grab the length from IPv6 header,
but that changed to use net_pkt_get_len(): that one must provide the
real lenth.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Only next to be removed functions like net_tcp_set_checksum() are left
untouched. All the rest is switched.
Adding net_tcp_finalize() to follow the same logic as for UDP and else.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This proovse to drastically reduce runtime overhead as it does not need
to parse IP nor TCP header all over again in a lot of places.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
As these were parsed already by IPv4/6 input functions let's use them.
Applying the change on trivial UDP usage. TCP usage will have its own
commit.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This optimizes the memory quite a bit since we do not need to clone nor
split the original packet at any time.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Most of the code had to be reworked due to the new API: it's more
logical to do everything sequentially (first headers, then MLD part)
than the contrary with inserting headers at the end.
Using get_data/set_data as well it makes the code clearer.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Reworking the logic to reduce the amount of variables.
This part was heavier to change as it was not accessing the headers
directly but instead was read parts by parts.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
In nbr part, this is a useful information. Since net_icmpv6_input has
already parsed the icmpv6 header, let's get pass it, instead of
retrieving/parsing it again in various handler functions.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is meant to remove the need for macro NET_IPV6_HDR(), since we
don't know in future if accessing the header that way will be valid.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Use the new net_pkt API to proceed through IPv6 header and all the
extension header as well.
Use udp/tcp input functions relevantly, and call net_conn_input
afterwards.
Note: This commit temporarly disable IPv6 fragmentation support
in the code directly. Which support will be re-enabled afterwards.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
checksum_offload is now the only one using that function, let's get rid
of such usage.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The net-app API is removed. Users should use the BSD socket API
for application development.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use auto-generated device tree macros in LPS25HB driver to avoid
usage of dts.fixup code for it.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Use auto-generated device tree macros in LSM6DS0 driver to avoid
usage of dts.fixup code for it.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
This board is unmaintained and unsupported. It is not known to work and
has lots of conditional code across the tree that makes code
unmaintainable.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The disabled test causes crash in qemu_x86, so temporarily disable
it until a proper fix is found.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit makes the necessary changes to allow the following tests
to run on cc3220sf_launchxl:
- mqtt_packet
- mqtt_publisher
- mqtt_subscriber
- mqtt_pubsub
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
There was a false timeout error because we did not check the
return value correctly. This issue is seen now because code
flow in core IP stack is happening in different order than
before.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
There are no longer per-partition initialization functions.
Instead, we iterate over all of them at boot to set up the
derived k_mem_partitions properly.
Some ARC-specific hacks that should never have been applied
have been removed from the userspace test.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The public APIs for application shared memory are now
properly documented and conform to zephyr naming
conventions.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Building of nsim_em board will get the NSIM UART build tested so no need
to have an explicit test for it here.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Minor change:
Rename the file names of the test scripts for consistency with
other BLE code
The simulation identification string is also changed (although
there is no actual functional need)
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
To also cover the new split controller architecture (with a common ULL
and vendor dependent LLL).
Add a connection testcase (without encryption so far) for the nrf52_bsim
configured with the split controller architecture.
This is just the exact same as the Basic_con test but building the test
with CONFIG_BT_LL_SW_SPLIT=y.
Privacy and data lenght extensions are also so far disabled as the
new controller does not yet support them.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
To allow for incremental builds also when 2 projects are only
differentiated by the project configuration file.
Separate the build dirertories also by the selected project file.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
It is the macro name that matters, not its value. Here, that will help
to save 1 bit in struct net_pkt later on.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The app shared memory macros for declaring domains provide
no value, despite the stated intentions.
Just declare memory domains using the standard APIs for it.
To support this, symbols declared for app shared memory
partitions now are struct k_mem_partition, which can be
passed to the k_mem_domain APIs as normal, instead of the
app_region structs which are of no interest to the end
user.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add test to log_output module. Test suite covers usage of
log_output_string function.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Changed 'in place' mode to bypass logger system and directly
call active backends. With this approach memory footprint of
the logger can be significantly reduced in terms of RAM and ROM.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The previous commit replaced the net_pkt element ref with an element
atomic_ref. CI tests turned up more places where ref was used directly.
This commit converts them to use the new element.
Signed-off-by: Daniel Glöckner <dg@emlix.com>
Use auto-generated device tree macros in LIS3MDL driver to avoid
usage of dts.fixup code for it.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Use auto-generated device tree macros in LIS2MDL driver to avoid
usage of dts.fixup code for it.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Use auto-generated device tree macros in LSM6DSL driver to avoid
usage of dts.fixup code for it.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Updated the GCOV_COUNTERS value, without which the coverage data
was corrupted when gcc 8.2 was used.
GH-12571
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Several places in the code have constructions like this:
if (bool_variable) {
atomic_set_bit(flags, FLAG);
} else {
atomic_clear_bit(flags, FLAG);
}
To reduce the amount of code for such situations, introduce a new
atomic_set_bit_to() helper which lets you condense the above five
lines to a single one:
atomic_set_bit_to(flags, FLAG, bool_variable);
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The old legacy APIs use net-app library and as that is being
removed, then the dependencies need to be removed also.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Include building the init tests with the new Link Layer
split architecture.
Has the data length update and controller privacy disabled
until they are implemented in the new architecture.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Basic test for poll() behavior. UDP sockets are used for simplicity
so far (poll-related paths for UDP and TCP are similar, though later
adding TCP explicitly for full coverage may be useful).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The idea is that we should have many, many tests. The only reasonable
way to achieve that is by making tests easy and pleasant to write,
and that requires common, easy to reuse infrastructure.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
1. Consistently use prepare_sock helpers.
2. Test not just client->server sending, but sending reply.
3. Send large packets (>1 net_buf fragment), not just small.
4. Check POSIX behavior on recv()ing datagram incompletely (the rest
should be discarded and next recv() should read next datagram.
5. More cleanroom testing, e.g. explicitly reinitialize input params
on each call (without assumptions that they're left with suitable
values from previous calls), clear input buffers before each read
operations, etc.
6. Reformat code. Previously it was very sparse, giving long test
functions, and thus impression that tests are complicated and hard
to write.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Share lis2dh driver among few accelerometer sensors that has
same register interface: LIS2DH, LIS3DH, LSM303DLHC, LIS2DH12,
LSM303AGR.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Use auto-generated device tree macros in LIS2DH driver to avoid
usage of dts.fixup files. The triggered interrupt part has been
slightly hacked to automatically understand whether only int1 is
configured or both int1 and int2.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
The original implementation allows a list to be corrupted by list
operations on the removed node. Existing code attempts to avoid this by
using external state to determine whether a node is in a list, but this
is fragile and fails when the state that holds the flag value is changed
after the node is removed, e.g. in preparation for re-using the node.
Follow Linux in invalidating the link pointers in a removed node. Add
API so that detection of particpation in a list is available at the node
abstraction.
This solution relies on the following steady-state invariants:
* A node (as opposed to a list) will never be adjacent to itself in a
list;
* The next and prev pointers of a node are always either both null or
both non-null.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Added tests for async UART API and test configuration for
nrf52840_pca10056 board.
For tests to work, RX and TX pins have to be connected together
and second UART is needed to output results to console.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
Add support to STM LIS2DS12 3-axis accelerometer driver.
The driver support I2C and SPI bus communication and both
polling and drdy trigger mode.
Currently it uses high resolution only as power mode.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
lib/ was starting to get messy and inconsitent. Files being either
dumped in the root or in sub-directories without a clear plan.
Move all library components into one single folder and call it 'os'.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Minor adjustments are done to the nRF clock_control and rtc_timer
drivers to make them usable on nRF9160 as well.
The arm_irq_vector_table test code is modified only because it uses
the function that has been renamed in the nrf_rtc_timer driver.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
There is an effort underway to make most of the Zephyr build script's
reentrant. Meaning, the build scripts can be executed multiple times
during the same CMake invocation.
Reentrancy enables several use-cases, the motivating one is the
ability to build several Zephyr executables, or images, for instance a
bootloader and an application.
For build scripts to be reentrant they cannot be directly referencing
global variables, like target names, but must instead reference
variables, which can vary from entry to entry.
Therefore, in this patch, we replace global targets with variables.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Prolong by 1 second the BT encrypted connection test, to ensure
there is enough time for the link itself to be encrypted.
Before this change the key was exchanged, but the 1st notification
(pass condition) was received before the link itself was encrypted.
With this change we wait for 1 notification more (1 second more),
and during that extra second the link is actually encrypted.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
printk is supposed to be very lean, but should at least not
print garbage values. Now when a 64-bit integral value is
passed in to be printed, 'ERR' will be reported if it doesn't
fit in 32-bits instead of truncating it.
The printk documentation was slightly out of date, this has been
updated.
Fixes: #7179
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add a configuration structure to sht3xd that holds instance-specific
parameters, implemented in a immutable statically allocated object
initialized with material from device tree binding aliases.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Fails sporadically on this platform and causing CI blockage.
Filed bug #12478. Should be reverted once bug is fixed.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We have a new power management system and those samples have been
written for specific boards and using the application based power
management subsystem. We are getting new tests/samples that are generic
with the new subsystem, so remove those in favor of the new ones.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit adds a test case checking if ADC drivers can work properly
after discarding an invalid sampling request.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Apart from normal customizations of vendor specific parameters in ADC
configuration used in the test, a few more changes in test cases were
also introduced in commit 1bfa34f4fb.
This resulted in some parts of ADC API (like zero interval between
consecutive samplings) not being tested at all. This commit restores
the original behavior of the test cases (with added comments that
zero intervals are intentional).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Currently only nRF drivers need assignments of analog inputs to ADC
channels (ADC_CONFIGURABLE_INPUTS Kconfig option is activated only for
these drivers). Hence, there is no need to define ADC_xxx_CHANNEL_INPUT
labels for any other ADC driver as they will be ignored anyway.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
These were being truncated to 32-bits, and only 8
hex digits were supported.
An extraneous printk() at the beginning of the test
which was not being tested in any way has been removed.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Change driver to get I2C address of sensor from the device tree like
most other sensor drivers that utilize device tree.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert lsm303dlhc_accel & lsm303dlhc_magn sensor driver to use new
defines so we can remove the dts_fixup.h code for it.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Driver for networking device Microchip ENC28J60 is used as SPI slave,
moved to DTS type definition. Samples echo_client and echo_server use
this device on Arduino 101 board.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Use DT_ instead of CONFIG_ for spi freq, spi bus name, flash device
name and flash base address.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
Disabled the CONFIG_COVERAGE for benchmarks and other tests.
This is needed because it interferes with normal behavior of the
test case.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
These tests need to use stack size as a function of
CONFIG_TEST_EXTRA_STACKSIZE. These test will fail when
CONFIG_COVERAGE is enabled.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
This is a custom Gcov implementation. Taking excerpts from gcc
gcc libgcc/libgcov.h and gcc/gcov-io.h.
Ported to zephyr by Ramakrishna Pallala <ramakrishna.pallala@intel.com>
and Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
tests: Modify tests to use DEVICE_AND_API_INIT()
Modified samples/tests drivers to use DEVICE_AND_API_INIT() instead
of deprecated DEVICE_INIT() api
Signed-off-by: Varun Sharma <varun.sharma@intel.com>
In driver and application code use the new device-tree values produced
by standard compatible-instance bindings.
As this code may be used as an example add a comment describing how the
binding instance number cannot be reliably used to distinguish multiple
instances.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Zephyr has been using "i2c,eeprom" for the compatible property. This is
inconsistent with the property documentation which expects
"manufacturer,model" to be used.
The Linux standard compatible name for I2C EEPROMs is "atmel,at24". The
standard for SPI EEPROMS is "atmel,at25". We don't have support for the
latter, but change the name for the former.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
These two tests are hitting a stack overflow on x86_64 (not entirely
surprisingly), but can't just increase stack size because there is an
assert in the CMSIS compatibility layer that stacks be under 512
bytes. Just disable for now.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This builds with a host compiler, not one from the SDK, and so no
newlib library is available. There is work to enable newlib detection
at and above the cmake level. This patch can be reverted when that
lands.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
There is actually nothing wrong with this test code idiom. But it's
tickling a qemu emulator bug with the hpet driver and x86_64[1]. The
rapidly spinning calls to k_uptime_get_32() need to disable
interrupts, read timer hardware state and enable them. Something goes
wrong in qemu with this process and the timer interrupt gets lost.
The counter blows right past the comparator without delivering its
interrupt, and thus the interrupt won't be delivered until the counter
is next reset in idle after exit from the busy loop, which is
obviously too late to interrupt the timeslicing thread.
Just replace the loops with a single call to k_busy_wait(). The
resulting code ends up being much simpler anyway. An added bonus is
that we can remove the special case handling for native_posix (which
was an entirely unrelated thing, but with a similar symptom).
[1] But oddly not the same emulated hardware running with the same
driver under the same qemu binary when used with a 32 bit kernel.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This architecture doesn't support stack canaries. In fact the gcc
-fstack-protect features don't seem to be working at all. I'm
guessing it's an x32 ABI mismatch?
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This is intended to be a value set by the platform to adjust the size
of stacks created by tests. This test was setting it explicitly, and
failing to honor it when creating its own stacks.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This patch adds a x86_64 architecture and qemu_x86_64 board to Zephyr.
Only the basic architecture support needed to run 64 bit code is
added; no drivers are added, though a low-level console exists and is
wired to printk().
The support is built on top of a "X86 underkernel" layer, which can be
built in isolation as a unit test on a Linux host.
Limitations:
+ Right now the SDK lacks an x86_64 toolchain. The build will fall
back to a host toolchain if it finds no cross compiler defined,
which is tested to work on gcc 8.2.1 right now.
+ No x87/SSE/AVX usage is allowed. This is a stronger limitation than
other architectures where the instructions work from one thread even
if the context switch code doesn't support it. We are passing
-no-sse to prevent gcc from automatically generating SSE
instructions for non-floating-point purposes, which has the side
effect of changing the ABI. Future work to handle the FPU registers
will need to be combined with an "application" ABI distinct from the
kernel one (or just to require USERSPACE).
+ Paging is enabled (it has to be in long mode), but is a 1:1 mapping
of all memory. No MMU/USERSPACE support yet.
+ We are building with -mno-red-zone for stack size reasons, but this
is a valuable optimization. Enabling it requires automatic stack
switching, which requires a TSS, which means it has to happen after
MMU support.
+ The OS runs in 64 bit mode, but for compatibility reasons is
compiled to the 32 bit "X32" ABI. So while the full 64 bit
registers and instruction set are available, C pointers are 32 bits
long and Zephyr is constrained to run in the bottom 4G of memory.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
It's worth using custom timing information on a few systems to save
cycles or gain precision. But make the use of k_cycle_get_32() a
proper default instead of hardcoding all the platforms and failing to
build on new ones. On Xtensa and RISC-V (and now x86_64) the cycle
informatoin from that call is a very fast wrapper around the native
counters anyway -- all you would save would be the function call
overhead.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
These files were relying on _thread_essential_set() from
kernel_internal.h, but not including it directly. New architectures
won't transitively include things the same way.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Remove configuration parameter CONFIG_BUS_TYPE. Now we may
make use of DT_ST_LSM6DSL_BUS_I2C and DT_ST_LSM6DSL_BUS_SPI
definition to select the bus.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
With the new implementation we do not need a NULL terminated list
of kobjects. Therefore the list will only contain valid entries
of kobjects.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Add negative scenarios, API tests and improve
test coverage for kernel management APIs supported
in CMSIS RTOS V2 portability layer.
Signed-off-by: Spoorthi K <spoorthi.k@intel.com>
The test_timer_periodicity test is racy and subject to initial state
bugs. The operation of that test is to:
1. Start a timer with a known period
2. Take the current time with k_uptime_get()
3. Wait for the timer to fire with k_timer_status_sync()
4. Check that the current time minus start time is the period
But that's wrong, because a tick expiring between any of the first
three steps is going to skew the math (i.e. the timer will have
started on a different tick than the "start time").
And taking an interrupt lock around the process can't fix the issue,
because in the tickless world we live in k_uptime_get() is actually a
realtime quanity based on a hardware counter and doesn't rely on
interrupt delivery.
Instead, use another timer object to synchronize the test start to a
driver tick, ensuring that even if the race is unfixable the initial
conditions are always correct.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Move to latest cmake version with many bug fixes and enhancements.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Used as a checksum on command messages when talking with MMC cards.
Implemented using the unwound bytewise implementation from
https://en.wikipedia.org/wiki/Computation_of_cyclic_redundancy_checks
which is a good mix of size and speed.
The API and naming matches lib/crc7.c in Linux.
Signed-off-by: Michael Hope <mlhx@google.com>
Keeping IRQ0 priority as 1 and IRQ1 priority as 0
so that system timer which of priority 0 in ARC
will be interrupted by IRQ1 of same priority.
In ARM, system timer is of priority 1, hence
making ISR0 priority as 2 and ISR1 priority as 1.
Thus system timer will always be interrupted by
ISR1 in both the architectures.
Fixes: #12147
Signed-off-by: Spoorthi K <spoorthi.k@intel.com>
The options selecting nRF drivers are now enabled by default when
an nRF SoC is selected as the build target.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Convert lsm9ds0_gyro driver to get the device name as well as
i2c slave information and gpio info for triggers from device tree.
Updates the build_all test accordingly.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Using multi-queue scheduler doesn't work for cmsis_rtos_v2 as it
supports a max of only 32 priority levels which is less than the
total priority levels required by cmsis_rtos_v2 (which is 56).
Hence explicitly asking the tests to use the scalable scheduler.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
Convert lsm9ds0_mfd accel/magn driver to get the device name as well
as i2c slave information from device tree. Updates the build_all
test accordingly.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Now it does not mangle with any ll reserver space, let's rename it to
net_pkt_lladdr_clear instead.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Fragmentation has nothing to do with 6lo. Up to the bearer to do so.
This change is required for futur serialization of 15.4 fragmentation.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Extended logger configuration to allow function name prefix for
messages with certain severity levels. By default only debug
messages are prefixed with function name.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The constant NSEC_PER_USEC is already defined in sys_clock.h, there is
no need to define it here.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
k_busy_wait() call used in test expects time in us, but the test
is specifying wait in ms.
Also the test fails on NRF5 platform as the test hardcodes the
interrupts priority to 0 and 1 and assumes system timer to be of
priority 0 which is not the case in NRF5 platforms as per
@pizi-nordic where system timer is at priority 1. Hence changing
test interrupts to 1 and 2.
Signed-off-by: Spoorthi K <spoorthi.k@intel.com>
Valgrind reported this:
==14823== Invalid read of size 4
==14823== at 0x113FB9: memcpy (string_fortified.h:34)
==14823== by 0x113FB9: ethernet_fill_header (ethernet.c:483)
==14823== by 0x113FB9: ethernet_send (ethernet.c:588)
==14823== by 0x116720: net_if_tx (net_if.c:173)
==14823== by 0x116720: process_tx_packet (net_if.c:211)
==14823== by 0x10FDB6: z_work_q_main (work_q.c:32)
==14823== by 0x10FD55: _thread_entry (thread_entry.c:29)
==14823== by 0x111CF7: posix_thread_starter (posix_core.c:301)
==14823== by 0x49673BC: start_thread (pthread_create.c:463)
==14823== by 0x4A78E15: clone (clone.S:108)
==14823== Address 0x87822a6 is in a rw- anonymous segment
The issue is that we had a pointer that pointed to local stack
variable and that pointer was used to access stuff after the
test function had returned.
Fixes#12006
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Convert lis2mdl magnetometer driver to get the device name as well
as i2c slave information from device tree. Updates the build_all
test accordingly.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
It was weird to pre-parse ICMPv6 headers in IPv6. Moreover parsing
failure of such header would not generate the right statistic.
Instead, centralizing all into net_icmpv6_input relevantly, and adapting
the test cases which were using that function. In RPL test, removing the
dummy dio test was simpler since dio is anyway tested later on.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This test can be on the boarder line with systems that only have 128K of
flash. Limit it systems with more for now.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Such API is convinient for check the persistent storage
value size or whether the value is NULL.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Since it is possible to test back-end with base64 and without
test suite should be extended.
This patch introduce tests with and without base64 encoding
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Since it is possible to test back-end with base64 and without
test suite should be extended.
This patch introduce tests with and without base64 encoding
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Introduction of stream-style encoding required tests reworks.
Test for checking especially byte-string encoding is not required
anymore as any value is kept as byte-string.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Convert lis3dh accelerometer driver to get the device name as well
as i2c slave information from device tree. Updates the build_all
test accordingly.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
These tests were creating objects from header file in the bss.
Fixed it by moving the objects to appropriate object files.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
The unit test gives net_context_get() an invalid protocol family
value which triggers an assert in net_context.c:160
This assert fails the test when it should not as we properly
check the return value. Fix this by disabling asserts for this
test.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The network interface mac address was not initialized properly
which caused assert in net_if.c:2881 to fail.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove network specific default and max log level setting
and start to use the zephyr logging values for those.
Remove LOG_MODULE_REGISTER() from net_core.h and place the
calls into .c files. This is done in order to avoid weird
compiler errors in some cases and to make the code look similar
as other subsystems.
Fixes#11343Fixes#11659
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Fix the following issues regarding the JUNIT results file
format (xml):
The logger produces illegal xml characters in the text output
=> Ensure that any non-valid xml character is replaced with
the valid xml scapes
When GNU parallel is installed and a testcase fails, the
xml output was malformed => Fixed it
Also store in the Junit output the processes stderr
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
In the wake of dfa7a354ff2a31fea8614b3876b051aadc30b242, where
the inclusions for MPU APIs were clean-up, we need to directly
include arm_core_mpu_dev.h in the userspace test suite, which
invokes arm_core_mpu_enable/disable(), directly. The same is
already done for ARC MPU.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
1. Created new shell module: shell_help.
2. Simplified command handlers with new shell print macros.
3. Removed help functions from command handlers.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Removing help "options" from shell API.
Currently SHELL_OPT macro is not used by users. What is more
commit: a89690d10f ignores possible options created in
command handler by the user. As a result they are not printed
in help message.
Second, currntly implemented "options" in command handlers options are
implemented without SHELL_OPT macro.
And last but not least this change will allow to implement
help handler in a way that user will not need to think about calling
functions printing help in a command handler.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Shell log backends were initialized from shell context. After
lowering logger thread priority order has been flipped. That
revealed a bug where shell logger backend was enabled before
backend ID's has been assigned during logger initialization.
ID assignment is moved to log backend enabling function making
it independent of order of initialization.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
No need to store/reset/recompute the chksums, only compute it again and
if it's not 0: drop the packet.
RFC 1071:
"To check a checksum, the 1's complement sum is computed over the
same set of octets, including the checksum field. If the result
is all 1 bits (-0 in 1's complement arithmetic), the check succeeds."
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
IPv4, ICMPv4/6, UDP, TCP: all checksums are meant to be one's complement
on a calculated sum. Thus return one's complement already from the right
place instead of applying it in each and every place where
net_calc_chksum is called.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
S1000 i2c test was blinking only blue and red lights. However, if
we have to distinguish between 2 test images for whatever reasons,
it is handy to have one test image blinking blue-red while the
other blinks green-white.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
Extended logger suite to test correctness of reporting dropped
log messages.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Many tests use either Ethernet or Dummy L2 and as such require
modifications towards the driver API on their fake devices.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Convert lis2dh accelerometer driver to get the device name as well
as i2c/spi slave information from device tree. Updates the build_all
test accordingly. (issue #11605)
Signed-off-by: Armando Visconti <armando.visconti@st.com>
poll_out function was returning the character that was sent. It
happens that it is always constant and the return of this functions is
never tested. Changing it to be a void function.
MISRA-C rule 17.7
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This allows for workqueues to be started in user mode.
No additional kernel objects or system calls are defined
other than starting the workqueue in user mode; for
permission purposes the embedded queue and thread objects
are sufficient.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Remove an unnecessary local variable to store the
return value, instead return directly thereby saving
few bits of memory.
Found using Coccinelle.
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Remove an unnecessary local variable to store the
return value, instead return directly thereby saving
few bits of memory.
Found using Coccinelle.
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
The tests are modified to reflect the changed return values
the spi flash read and write APIs return.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
The memory slabs used for I2S are used through DMA. In case the CPU has
a cache, we need to ensure minimum alignment so that an entire number of
cache lines can be cleaned or invalidated.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Two separate folders and Kconfig options causing confusion on
CoAP and CoAP_SOCK implementations. This patch simplifies it.
Current CoAP Kconfig option moved to COAP_NET_PKT.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Running tests compiled for 64bit architecture were causing errors
in logger module. Updated unittest.cmake to build tests only
for 32bit architecture.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
System Power Management is only supported in Tickless Idle mode.
This patch modifies Kconfig dependencies to ensure System Power
Management option selects Tickless Idle one.
Fixes: #11046
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
This adds common option to disable support for LE Data Length Update
procedure in controller and host.
This will reduce flash usage by compiling out le_data_len_change
event handler that will never be called if controller has been
compiled with BT_CTLR_DATA_LENGTH option disabled.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This adds common option to disable support for PHY Update
procedure in controller and host.
This will reduce flash usage by compiling out le_phy_update_complete
event handler that will never be called if controller has been
compiled with BT_CTLR_PHY option disabled.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
In the provided compile.sh script (which builds all bsim_bt
testcases used in the CI regression runs) add the option to
do an incremental build (if possible).
This is just a nicety for users who want to use this script
while testing locally.
This is controller with the existance of the variable INCR_BUILD
For ex., the script can be called, as:
WORK_DIR=${ZEPHYR_BASE}/my_work_folder INCR_BUILD=y \
tests/bluetooth/bsim_bt/compile.sh
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
The gen_isr_table test now tries to install two dynamic
IRQ handlers.
RISCV32 has a workaround due to limited number of SW
triggerable interrupts that can be configured.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Rename existing headers and sybols to mqtt_legacy, to allow new
implementation to keep old config and header names.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Now all tests are additionally run in user mode.
Test now all use the i2s_buf_read/write APIs, which
are themselves implemented in terms of i2s_read/write.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
USB is desired to be configured by default and hence the Kconfigs
are addressed in _defconfig for intel_s1000_crb. Cleaned it up
from the app level prj.conf which was anyway redundant.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
Converts the adxl362 sensor driver to get the device name and spi slave
properties from the device tree rather than Kconfig. Updates the
build_all test accordingly.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Rewritten Xtensa CCOUNT driver along the lines of all the other new
drivers. The new API permits much smaller code.
Notably: The Xtensa counter is a 32 bit up-counter with a comparator
register. It's in some sense the archetype of this kind of timer as
it's the simplest of the bunch (everything else has quirks: NRF is
very slow and 24 bit, HPET has a runtime frequency detection, RISC-V
is 64 bit...). I should have written this one first.
Note also that this includes a blacklist of the xtensa architecture on
the tests/driver/ipm test. I'm getting spurious failures there where
a k_sem_take() call with a non-zero timeout is being made out of the
console output code in interrupt context. This seems to have nothing
to do with the timer; I suspect it's because the old timer drivers
would (incorrectly!) call z_clock_announce() in non-interrupt context
in some contexts (e.g. "expiring really soon"). Apparently this test
(or something in the IPM or Xtensa console code) was somehow relying
on that on Xtensa. But IPM is a Quark thing and there's no particular
reason to run this test there.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This test was written with an outrageously long timeout of 25 seconds.
That blows right through the 32 bit cycle counter on qemu_cortex_m3[1]
and produces an essentially random delay instead of the desired
number, causing a hang with the new SysTick driver in tickless mode.
Push the number down so it doesn't overflow. The root cause, though,
is that k_busy_wait() can take arguments it can't handle. It ought to
have an outer loop or something so that it can spin for INT_MAX
milliseconds correctly.
[1] Which has a 12MHz clock rate. Many hardware implementations are
much faster still.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
When TICKLESS_KERNEL is enabled, the current time in ticks is based on
a hardware counter and not interrupt delivery (which is the whole
point of tickless), so irq-locking does not prevent time from
advancing. Disable this test in that configuration.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
These tests was written to try to eliminate timer interrupts, but the
mechanism chosen (setting TICKS_PER_SECOND to 1) is dangerously
susceptible to overflow conditions on systems with fast cycle counters
and high timeout durations.
Actually the tests pass just fine if you use a conventional tick rate
and use a tickless-capable driver (which eliminates interrupts too,
which is the whole point), but there's no easy way in kconfig to do an
"if" to select that condition for capable systems only. Just disable
tickless to keep the same behavior.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Qemu doesn't like tickless. By default[1] it tries to be realtime as
vied by the host CPU -- presenting read values from hardware cycle
counters and interrupt timings at the appropriate real world clock
times according to whatever the simulated counter frequency is. But
when the host system is loaded, there is always the problem that the
qemu process might not see physical CPU time for large chunks of time
(i.e. a host OS scheduling quantum -- generally about the same size as
guest ticks!) leading to lost cycles.
When those timer interrupts are delivered by the emulated hardware at
fixed frequencies without software intervention, that's not so bad:
the work the guest has to do after the interrupt generally happens
synchronously (because the qemu process has just started running) and
nothing notices the dropout.
But with tickless, the interrupts need to be explicitly programmed by
guest software! That means the driver needs to be sure it's going to
get some real CPU time within some small fraction of a Zephyr tick of
the right time, otherwise the computations get wonky.
The end result is that qemu tends to work with tickless well on an
unloaded/idle run, but not in situations (like sanitycheck) where it
needs to content with other processes for host CPU.
So, add a flag that drivers can use to "fake" tickless behavior when
run under qemu (only), and enable it (only!) for the small handful of
tests that are having trouble.
[1] There is an -icount feature to implement proper cycle counting at
the expense of real-world-time correspondence. Maybe someday we might
get it to work for us.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Turning 'def_bool' in Kconfig.defconfig files into 'default' revealed
three unused symbols (confirmed with 'git grep'). Remove them.
Search for "Kconfig.defconfig" in
https://docs.zephyrproject.org/latest/application/kconfig-tips.html for
an explanation of how def_bool->default can reveal undefined symbols.
Removed unused symbols:
- SPI_DW_CLOCK_GATE
- PINMUX_MPS2
- BOARD_XTENSA
Also remove an assignment to the promptless symbol ALTERA_AVALON_SYSID,
in tests/boards/altera_max10/sysid/prj.conf. Assignments to promptless
symbols have no effect.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
These changes were obtained by running a script created by
Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following
specification:
1. Read the contents of all dts_fixup.h files in Zephyr
2. Check the left-hand side of the #define macros (i.e. the X in
#define X Y)
3. Check if that name is also the name of a Kconfig option
3.a If it is, then do nothing
3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it
has neither of these two prefixes
4. Replace the use of the changed #define in the code itself
(.c, .h, .ld)
Additionally, some tweaks had to be added to this script to catch some
of the macros used in the code in a parameterized form, e.g.:
- CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS
- CONFIG_UART_##idx##_TX_PIN
- I2C_SBCON_##_num##_BASE_ADDR
and to prevent adding DT_ prefix to the following symbols:
- FLASH_START
- FLASH_SIZE
- SRAM_START
- SRAM_SIZE
- _ROM_ADDR
- _ROM_SIZE
- _RAM_ADDR
- _RAM_SIZE
which are surprisingly also defined in some dts_fixup.h files.
Finally, some manual corrections had to be done as well:
- name##_IRQ -> DT_##name##_IRQ in uart_stm32.c
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Test which depends on the nrf52_bsim board.
It is based on the basic connection bsim test,
with the same pass/fail critaria.
The only difference being that the link will be encrypted
therefore exercising that part of the BLE stack.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
The compile.sh script compiles the neccessary applications to run
all testcases.
The run_parallel.sh script runs all avaliable tests scripts
(e.g.
tests/bluetoothbsim_bt/bsim_test_app/tests_scripts/Basic_con.sh )
and reports which of them pass or fail.
Note that the run_parallel script will run the test in parallel
only if it can find GNU parallel (which is missing in CI),
otherwise it just runs them in serial
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
A script which will execute:
* the peripheral sample
* the bsim_test_app (the actual self-testing application)
* the BabbleSim phy
This script will return
* 0 if the test passes
* something else otherwise
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Test which depends on the nrf52_bsim board.
It is based on the central_hr sample application.
The testcase is considered passed, if during the first 5 seconds
after boot, it manages to find and connect to a
peripheral and a notification is received from it.
Otherwise, the testcase fails.
Note that the executable return code will reflect the status of the
test:
0: Testcase passed
1: Testcase was stopped while in progress
2: Testcase failed
anything else: A failure not from the testcase itself
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
In the POSIX architecture, with the inf_clock "SOC", time does
not pass while the CPU is running. Tests that require time to pass
while busy waiting should call k_busy_wait() or in some other way
set the CPU to idle. This test was setting the CPU to idle while
waiting for the next time slice. This is ok if the system tick
(timer) is active and awaking the CPU every system tick period.
But when configured in tickless mode that is not the case, and the
CPU was set to sleep for an indefinite amount of time.
This commit fixes it by using k_busy_wait(a few microseconds) inside
that busy wait loop instead.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
In the POSIX architecture, with the inf_clock "SOC", time does
not pass while the CPU is running. Tests that require time to pass
while busy waiting should call k_busy_wait() or in some other way
set the CPU to idle. This test was setting the CPU to idle while
waiting for the next time slice. This is ok if the system tick
(timer) is active and awaking the CPU every system tick period.
But when configured in tickless mode that is not the case, and the
CPU was set to sleep for an indefinite amount of time.
This commit fixes it by using k_busy_wait(a few microseconds) inside
that busy wait loop instead.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
In the POSIX architecture, with the inf_clock "SOC", time does
not pass while the CPU is running. Tests that require time to pass
while busy waiting should call k_busy_wait() or in some other way
set the CPU to idle. This test was setting the CPU to idle while
waiting for the next time slice. This is ok if the system tick
(timer) is active and awaking the CPU every system tick period.
But when configured in tickless mode that is not the case, and the
CPU was set to sleep for an indefinite amount of time.
This commit fixes it by using k_busy_wait(a few microseconds) inside
that busy wait loop instead.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
In the POSIX architecture, with the inf_clock "SOC", time does
not pass while the CPU is running. Tests that require time to pass
while busy waiting should call k_busy_wait() or in some other way
set the CPU to idle. This test was setting the CPU to idle while
waiting for the next time slice. This is ok if the system tick
(timer) is active and awaking the CPU every system tick period.
But when configured in tickless mode that is not the case, and the
CPU was set to sleep for an indefinite amount of time.
This commit fixes it by using k_busy_wait(a few microseconds) inside
that busy wait loop instead.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
In the POSIX architecture, with the inf_clock "SOC", time does
not pass while the CPU is running. Tests that require time to pass
while busy waiting should call k_busy_wait() or in some other way
set the CPU to idle. This test was setting the CPU to idle while
waiting for the next time slice. This is ok if the system tick
(timer) is active and awaking the CPU every system tick period.
But when configured in tickless mode that is not the case, and the
CPU was set to sleep for an indefinite amount of time.
This commit fixes it by using k_busy_wait(a few microseconds) inside
that busy wait loop instead.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Convert the BMI160 to use Device Tree to get SPI and GPIO params instead
of Kconfig. Updated samples, tests, and arduino_101_sss board support
for this.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Application should be responsible for enabling various drivers and
features, we should not enable everything by default.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Changed LOG_MODULE_REGISTER and LOG_MODULE_DECLARE macros to take log
level as optional parameter. LOG_MODULE_DECLARE can now also be used
in static inline functions in headers. Added LOG_LEVEL_SET macro
which is used when instance logging API is used to indicate maximal
log level compiled into the file.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This makes mesh shell to register commands with the new shell subsystem
and stop using the legacy shell.
Fixes#11056
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
IPv6 is needed as there is special handling of IPv6 addresses
when MAC address is changed. We do not need DAD + other IPv6
specific features so those are disabled.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Some minor style and typo fixes in
tests/kernel/mem_protect/userspace/src/main.c.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Make sure that if network packet destination IPv6 address is
interface local scope multicast address FF01::, then those
packets must routed back to us when sending them.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Group various shell modules for kernel, peripherals and other
subsystems. This will be used to test board functionality interactively
using commands implemented in the individual shell modules.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
k_poll_signal was being used by both, struct and function. Besides
this being extremely error prone it is also a MISRA-C violation.
Changing the function to contain a verb, since it performs an action
and the struct will be a noun. This pattern must be formalized and
followed and across the project.
MISRA-C rules 5.7 and 5.9
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
There was an struct and a variable called _kernel. This is error prone
and a MISRA-C violation. It is changing the struct to have a unique
identifier.
MISRA-C rule 5.8
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Unify the function naming for various network checking functions.
For example:
net_is_ipv6_addr_loopback() -> net_ipv6_is_addr_loopback()
net_is_my_ipv6_maddr() -> net_ipv6_is_my_maddr()
etc.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The ICMP checksum was not placed to correct position in the
created test packet. This caused the checksum to be bad, and
because we now check the ICMP checksum, the packet was rejected
and the mld test failed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Test that we drop the received packet if the destination
address is organisation scope (ff08::) multicast address.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Test that we drop the received packet if the destination
address is site scope (ff05::) multicast address.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Test that we drop the received packet if the destination
address is zero scope (ff00::) multicast address.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Test that we drop the received packet if the destination
address is interface scope multicast address.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Move the GPIO info for the buttons into the dts, this lets us match what
all other boards are doing. Update some sample & test code to use the
dts generated SW0_GPIO_CONTROLLER define instead of SW0_GPIO_NAME.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add two tests that will check if the source or destination address
is loopback address ::1 and we drop those packets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In the POSIX architecture, with the inf_clock "SOC", time does
not pass while the CPU is running. Tests that require time to pass
while busy waiting should call k_busy_wait() or in some other way
set the CPU to idle. This test was setting the CPU to idle while
waiting for the next time slice. This is ok if the system tick
(timer) is active and awaking the CPU every system tick period.
But when configured in tickless mode that is not the case, and the
CPU was set to sleep for an indefinite amount of time.
This commit fixes it by using k_busy_wait(a few microseconds) inside
that busy wait loop instead.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
In the POSIX architecture, with the inf_clock "SOC", time does
not pass while the CPU is running. Tests that require time to pass
while busy waiting should call k_busy_wait() or in some other way
set the CPU to idle. This test was setting the CPU to idle while
waiting for the next time slice. This is ok if the system tick
(timer) is active and awaking the CPU every system tick period.
But when configured in tickless mode that is not the case, and the
CPU was set to sleep for an indefinite amount of time.
This commit fixes it by using k_busy_wait(a few microseconds) inside
that busy wait loop instead.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
In the POSIX architecture, with the inf_clock "SOC", time does
not pass while the CPU is running. Tests that require time to pass
while busy waiting should call k_busy_wait() or in some other way
set the CPU to idle. This test was setting the CPU to idle while
waiting for the next time slice. This is ok if the system tick
(timer) is active and awaking the CPU every system tick period.
But when configured in tickless mode that is not the case, and the
CPU was set to sleep for an indefinite amount of time.
This commit fixes it by using k_busy_wait(a few microseconds) inside
that busy wait loop instead.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Enhance test to validate a scenario where k_thread_name_set()
with NULL as thread ID should set thread name to current
thread.
Signed-off-by: Spoorthi K <spoorthi.k@intel.com>
This test was failing on nrf52810_pca10040 due to lack of RAM.
It was a side effect of increasing the privilege stack size.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
When using an IDE (e.g. Eclipse, Qt Creator), the project name gets
displayed. This greatly simplifies the navigation between projects when
having many of them open at the same time. Naming every project "NONE"
defeats this functionality.
This patch tries to use sensible project names while not duplicating
too much of what is already represented in the path. This is done by
using the name of the directory the relevant CMakeLists.txt file is
stored in. To ensure unique project names in the samples (and again, in
the tests folder) folder, small manual adjustments have been done.
Signed-off-by: Reto Schneider <code@reto-schneider.ch>
Cache the used transport protocol in net_pkt. This way we can
avoid traversing IP header to get the last protocol in network
packet. This is mostly an issue in IPv6 which can have a long
list of extension headers after IPv6 header and before the
transport protocol header.
Fixes#10853
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Some irrelevant errors were printed even if the tests passed.
Make sure that these obsolete errors at not printed so that
sanitychecker does not get confused about them.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It might be that the test might access null pointer in some cases.
In practice this is not possible as the test is using pre-defined
data when running the test.
Fixes#10777
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Extended logger to support optional log message prepending with
function name.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Extended supported number of arguments in log message. Support for
messages consisting of more than 2 chunks had to be added. So far
messages could consist of one chunk (up to 3 args) or two chunks
(2 args in first chunk and 7 in second chunk). Once 2+ chunks
support is added number of arguments is techinically limited to
15 (4 bit field). log_core and log_output extended to suppor 10
arguments.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Initialize an otherwise unitialized array which was causing random
failures in tests/posix/common.
Fixes#10508
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Log_core test was failing due to test structure elements not being
correctly reset before the test.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This is a new test and we have riscv32 failing on that all of the
sudden. Disabling while we look into it and identify if that is a
testcase issue or not.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This test was written to assume that on idle the CPU would wake up on
the next tick boundary because of the timer interrupt. No such
interrupt arrives in tickless mode and it hangs forever.
A more whiteboxy test involving setting a clock timout will have to be
written for this feature if we want to keep it on tickless systems.
Alternatively we could move this test out of tests/kernel/context and
always disable tickless.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The theory behind this test seems to be that taking an IRQ lock should
prevent the advance of the kernel's tick counter. That works on
traditional timers only. In tickless mode the timer hardware/driver
is expected to be able to give us an answer for time independent of
interrupt delivery, so the test fails spuriously. The "bug" detected
is a feature of tickless!
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
I was pretty careful, but these snuck in. Most of them are due to
overbroad string replacements in comments. The pull request is very
large, and I'm too lazy to find exactly where to back-merge all of
these.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This test needs just a tiny bit of extra stack. 512 bytes isn't
enough on x86 with the most recent set of timer patches.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Now that the API has been fixed up, replace the existing timeout queue
with a much smaller version. The basic algorithm is unchanged:
timeouts are stored in a sorted dlist with each node nolding a delta
time from the previous node in the list; the announce call just walks
this list pulling off the heads as needed. Advantages:
* Properly spinlocked and SMP-aware. The earlier timer implementation
relied on only CPU 0 doing timeout work, and on an irq_lock() being
taken before entry (something that was violated in a few spots).
Now any CPU can wake up for an event (or all of them) and everything
works correctly.
* The *_thread_timeout() API is now expressible as a clean wrapping
(just one liners) around the lower-level interface based on function
pointer callbacks. As a result the timeout objects no longer need
to store backpointers to the thread and wait_q and have shrunk by
33%.
* MUCH smaller, to the tune of hundreds of lines of code removed.
* Future proof, in that all operations on the queue are now fronted by
just two entry points (_add_timeout() and z_clock_announce()) which
can easily be augmented with fancier data structures.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
If the idle code was detecting that it needed to sleep for less than
CONFIG_SYS_TICKLESS_IDLE_THRESH, then it would never call
z_clock_set_timeout() at all, which means that the system would never
wake up unless it already had a timeout scheduled! Apparently we
lacked a test case to detect this condition.
Honestly this seems like a crazy feature to me. There's no benefit in
delivering needless tick announcements. If the system has the
capacity to enter deeper sleep for long timeouts, that's already
exposed via the PM APIs, the timer subsystem needn't be involved.
But... we actually have a test (tickless_concept) that looks at this,
so support it for now and consider deprecation later.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The system tick count is a 64 bit quantity that gets updated from
interrupt context, meaning that it's dangerously non-atomic and has to
be locked. The core kernel clock code did this right.
But the value was also exposed to the rest of the universe as a global
variable, and virtually nothing else was doing this correctly. Even
in the timer ISRs themselves, the interrupts may be themselves
preempted (most of our architectures support nested interrupts) by
code that wants to set timeouts and inspect system uptime.
Define a z_tick_{get,set}() API, eliminate the old variable, and make
sure everyone uses the right mechanism.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This was another "global variable" API. Give it function syntax too.
Also add a warning, because on nRF devices (at least) the cycle clock
runs in kHz and is too slow to give a precise answer here.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This just got turned into a function from a "variable" API, but
post-the-most-recent-patch it turns out to be degenerate anyway.
Everyone everywhere should always have been using the kconfig variable
directly, and it was only a weirdness in the tickless API that made it
confusing. Fix.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The existing API defined sys_clock_{hw_cycles,ticks}_per_sec as simple
"variables" to be shared, except that they were only real storage in
certain modes (the HPET driver, basically) and everywhere else they
were a build constant.
Properly, these should be an API defined by the timer driver (who
controls those rates) and consumed by the clock subsystem. So give
them function syntax as a stepping stone to get there.
Note that this also removes the deprecated variable
_sys_clock_us_per_tick rather than give it the same treatment.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Remove redundant 'sample' tag and add something that matches the
functionality and features being tested, demonstrated.
Avoid short abbriviations and using full names for fs.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
After merging tinycrypt testcases, we left the original identifier, this
is not called crypto.tinycrypt.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
bat_commit is an old and obsolete tag that has not been maintained over
time and was supposed to serve a purpose that is obsolete now. Also
rename core tag with kernel.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
These tests rely on compiling with one of the provided
C libraries which are not compiled for any
of the POSIX ARCH boards => balcklist based on the arch
and not on the board
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Fixed condition and wrong Kconfig name, shoud be CONFIG_CPU_HAS_NXP_MPU
instead of only CPU_HAS_NXP_MPU.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
test application of watchdog assumes that the variable
created in noinit section will have initial value as
zero. This is an incorrect assumption as variable
in noinit section can have any value. The application
is modified work even if variable in noint section
have any value.
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
Add default dts configuration for CI tests in case
selected board used for test purpose do not export
dts configuration for LIS2MDL
Signed-off-by: Mario Tesi <mario.tesi@st.com>
Added support to LIS2MDL Magnetometer sensor provided
with following features:
- I2C interface
- Mag data
- Temperature data
- ODR configurable by config or at runtime
- Trigger mode selectable by menuconfig
- IRQ pin configurable (by dts or Kconfig)
- Hard Iron offset setting at runtime
- Include yaml file
Tested on ST MEMS IKS01A2 + NUCLEO STM32F411RE board.
LIS2MDL connected to I2C master interface (SPI 3 wire not
supported yet).
Test run with all ODR {10, 20, 50, 100} Hz in poll and
trigger mode.
GPIO IRQ dts configuration has been tested by adding
to boards/arm/nucleo_f411re/nucleo_f411re.dts file
this patch:
&i2c1 {
status = "ok";
clock-frequency = <I2C_BITRATE_FAST>;
+
+ /* ST Microelectronics LIS2MDL mag sensor */
+ lis2mdl-magn@1e {
+ compatible = "st,lis2mdl-magn";
+ reg = <0x1e>;
+ irq-gpios = <&gpioa 4 0>;
+ label = "LIS2MDL";
+ status = "ok";
+ };
};
and adding boards/arm/nucleo_f411re/dts.fixup with following
content:
ST_STM32_I2C_V1_40005400_ST_LIS2MDL_MAGN_1E_LABEL
ST_STM32_I2C_V1_40005400_ST_LIS2MDL_MAGN_1E_BASE_ADDRESS
ST_STM32_I2C_V1_40005400_ST_LIS2MDL_MAGN_1E_BUS_NAME
ST_STM32_I2C_V1_40005400_ST_LIS2MDL_MAGN_1E_IRQ_GPIOS_CONTROLLER
ST_STM32_I2C_V1_40005400_ST_LIS2MDL_MAGN_1E_IRQ_GPIOS_PIN
For more info on this LIS2MDL please follow this link:
http://www.st.com/en/mems-and-sensors/lis2mdl.html
Signed-off-by: Mario Tesi <mario.tesi@st.com>
Mux configuration for I2C and GPIO are now done in SYS_INIT
which were earlier done in the respective tests.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
Removed obsolete CONFIG_SYS_LOG_* and CONFIG_NET_DEBUG_* options
from various sample and test applications.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Extended macro to accept flag indicating if given backend must be
initialized and enabled when log subsystem starts. Typically, simple
backends will have autostart flag set. More complex may require
explicit enabling (e.g. shell over BLE can only be enabled when
BLE connection is established).
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
If user will enable shell than for each backend shell instance
will be created automatically.
Update all shell examples according to the new initialization
procedure.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
This test is intended to verify the interrupt nesting.
Interrupt nesting feature allows an ISR to be preempted
in mid-execution if a higher priority interrupt is signaled.
The lower priority ISR resumes execution once the higher
priority ISR has completed its processing.
Signed-off-by: Ajay Kishore <ajay.kishore@intel.com>
The $srctree environment variable gives the path relative to which
'(o)source' statements work (the current directory is used if $srctree
is unset). It is set to $ZEPHYR_BASE in cmake/kconfig.cmake, so there's
no need to qualify the source of Kconfig.zephyr in sample Kconfig files
(or in external projects).
All 'source's in Zephyr assume that the Zephyr root directory is used as
the srctree as well, and would break otherwise.
Remove the $(ZEPHYR_BASE)s to make it clearer that all 'source'
statements work relative to the Zephyr root. There was some user
confusion on IRC.
Also explain how things work in the documentation.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Grouped the five pthread tests into two -
pthread execution and pthread termination;
removed redundant tests.
Added the refactored tests and pthread_key
tests into the common folder.
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
Some terminals literally interprets shell output data. Hence to print
a message in new line shell needs to send `\r\n` each time. To minimize
flash usage user can now send `\n` as a line delimiter and shell will
automatically add missing CR character.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
This commit updates the mem_domain_apis_test sample and the
mem_protect test, so they can compile and execute in ARMv8-M
platforms, which do not support the P_RW_U_RO access permissions
combination (privileged read/write, unprivileged read-only). The
modification consists of, simply, selecting a different access
permission (P_RO_U_RO) when building for ARMv8-M MPUs with the
unmodified ARM MPU architecture.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Extended ring buffer to allow storing raw bytes in it. API has been
extended keeping 'data item' mode untouched.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Deprecate API prefixed with sys_ring_buf_ and rename it
to ring_buf_item_ since this API is not a typical ring buffer
but ring buffer of data items (metadata + 32bit words).
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The Zephyr configuration system uses many different files in many
different formats. It makes it a lot easier for users to understand
what these files do if when we use the correct file extensions.
To this end we rename the dts.fixup files to the correct file
extension '.h'.
This is a breaking change for out-of-tree fixup files. Such files will
be detected and given an appropriate error message.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Enhance semaphore test to validate sem_timedwait()
and sem_trywait(). This is intended to improve
code coverage.
Also modify ztest check with zassert_equal with
return value instead of zassert_false for better
understandability.
Signed-off-by: Spoorthi K <spoorthi.k@intel.com>
In order to fully cover the platform that supports most of the optional
features in the specification, whitelist the nRF52840 DK.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Fixed some Kconfig inconsistencies around THREAD_CUSTOM_DATA,
POLL and NUM_PREEMPT_PRIORITIES.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
There is no guarantee of wake-up order when multiple threads
are woken up on the same tick. Hence, modified the tests
accordingly.
Fixes#8159.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
1. Shell will accept CR or LF as line delimiter.
2. Macro SHELL_DEFINE simplified - it no longer requires
new line character.
3. Fixes: #10207.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
As a master switch to access POSIX APIs.
Also, remove dependency on pthreads for tests which don't require it.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
1. Command handler can return command exectution status as int.
2. Existing command handlers rework.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Every board that uses dts-enabled spi drivers has a board-level dts, so
there is no need to have separate configs HAS_DTS_SPI_DEVICE and
HAS_DTS_SPI.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Every board that uses dts-enabled i2c drivers has a board-level dts, so
there is no need to have separate configs HAS_DTS_I2C_DEVICE and
HAS_DTS_I2C.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Extending logger to support logging transient strings (with %s).
With dedicated call (log_strdup), string is duplicated to a buffer
from internal logger pool. Logger implicitly manages the pool.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Under GNU C, sizeof(void) = 1. This commit merely makes it explicit u8.
Pointer arithmetics over void types is:
* A GNU C extension
* Not supported by Clang
* Illegal across all ISO C standards
See also: https://gcc.gnu.org/onlinedocs/gcc/Pointer-Arith.html
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
Change APIs that essentially return a boolean expression - 0 for
false and 1 for true - to return a bool.
MISRA-C rule 14.4
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
When running a UART test in CI, it is better to configure
the nativeposix UART to be mapped to the process STDIN/OUT.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
The Kconfig option CONFIG_BUILD_TIMESTAMP became unused when
BUILD_VERSION was introduced, but it's option and parts of it's
implementation was not completely cleaned from the repository.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Add ifdef guard to the z_reset_timeslice() to fix compilation
errors when CONFIG_TIMESLICING is disabled.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Adding i2c slave requires overlay with node definitions and
proper aliases depending on driver implementation.
Modified i2c_slave_api test to use information from dts.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
This adds a int return to recv callback which can be used to notify the
stack about errors when receiving a packet. In addition to that the user
can return -EINPROGRESS to inform the stack the data will be processed
asynchronously which can be complete by calling
bt_l2cap_chan_recv_complete.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
It is no longer necessary to set the KCONFIG_ROOT variable when the
KConfig file is in the application root directory.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The apds9960 sensor driver recently added support for trigger mode, but
the gpio dts fixups weren't added to the build_all test. Adds the
missing dts fixups and updates the sensor trigger test to include the
apds9960 sensor driver.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
To improve the code coverage on native posix, adding CONFIG_SCHED_MULTIQ
for scheduler api tests.
Extracting a separate prj_native_posix.conf file for the scheduler test,
which validates the "multi queue" scheduler on native posix.
Signed-off-by: Ajay Kishore <ajay.kishore@intel.com>
The total number of loops being executed were taking far too long
to finish executing the test case. This was causing the timer handler
to execute in the middle of the test case. Thereby causing a test case
failure.
Now the number of loops have been reduced and this will make sure the
test case completes.
This change has no effect on the time being calculated by the
benchmark.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
The test case was supposed to access the privileged stack area
but instead it was accessing the stack guard region.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
This patch updates the alignment for the memory domain partitions.
Also update the stack size for qemu_cortex_m3.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Adds many missing sensor drivers and rebalances the testcases to
instantiate similar numbers of sensor drivers. Splits the sensor trigger
testcase into two due to having too many thread objects.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This commit removes all MPU-related (ARM_CORE_MPU and NXP_MPU)
options exept ARM_MPU, which becomes master switch controlling
MPU support on ARM.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The ARM_MPU_NRF52X option is just selecting ARM_MPU option,
which could be also controlled through menuconfig.
This commit removes the ARM_MPU_NRF52X option and replaces
its usage by ARM_MPU option.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
New shell implementation is on the way. For now old one and all
references are kept to be gradually replaced by new shell.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Set CONFIG_USERSPACE in the prj.conf to ensure its set, right now
getting CONFIG_USERSPACE depends on tests/Kconfig setting it.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Rename _DEVICE_STRUCT_SIZE to _DEVICE_STRUCT_SIZEOF. This causes it to
be picked by the script 'gen_offset_header.py' and inserted into the
header file 'include/generated/offsets.h'.
Renaming from x_SIZE to x_SIZEOF will align it's name with the other
symbols that denote a sctruct's size, like K_THREAD_SIZEOF.
Furthermore, it will allow the symbol to be accessed through a header
file define, instead of only as an extern symbol. This is more
flexible, and more aligned with the other symbols in offsets.
Finally, if we are able to move all of offsets.c symbols into the
offsets.h header file we be able to remove offsets.o from the link and
thereby simplify the linking process.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
tests/subsys/logging/log_core does not work if inplace processing
is set and the process thread is disabled.
So let's set the valid configuration in its project file
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
The return of memset is never checked. This patch explicitly ignore
the return to avoid MISRA-C violations.
The only directory excluded directory was ext/* since it contains
only imported code.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The result of both printk and vprintk are not used in any place.
MISRA-C says that the return of every non void function must be
checked.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This test is intended to validate k_pipe_alloc_init()
and k_pipe_cleanup(), when CONFIG_USERSPACE is not defined.
Also added test to validate pending reader and pending writer
feature in pipe.
Signed-off-by: Ajay Kishore <ajay.kishore@intel.com>
With the new Kconfig preprocessor (described in
https://github.com/torvalds/linux/blob/master/Documentation/kbuild/
kconfig-macro-language.txt), the syntax for expanding environment
variables is $(FOO) rather than $FOO.
$(FOO) is a general preprocessor variable expansion, which falls back to
environment variables if the variable isn't set (like in Make). It can
also be used in prompts, 'comment's, etc.
The old syntax will probably be supported forever in Kconfiglib for
backwards compatibility, but might as well make it consistent now that
people might start using the preprocessor more.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Put all tinycrypt tests into one project. Having project for every small
feature does not scale and slows down testing and CI operations.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Rather than having some implied name for the logging name, explicitly
pass it in the macros LOG_MODULE_REGISTER & LOG_MODULE_DECLARE.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Create a basic test for the realtime clock. This sets the clock value
to a particular time, half a second in, and monitors the clock for a few
seconds, making sure that the value returned is reasonable.
Signed-off-by: David Brown <david.brown@linaro.org>
*_ll_src/*_ll_dst/*_ll_swap/*_ll_if were not self explanatory, ll
meaning "link layer" it's ambiguous what the names meant.
Changing to:
*_lladdr_src/*_lladdr_dst/*_lladdr_swap/*_lladdr_if to fix this.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This change adds DTS definition of SPI device for nRF chips.
It also removes SPI pin configuration from Kconfig and moves it to
chip DTS.
Signed-off-by: Filip Kubicz <filip.kubicz@nordicsemi.no>
Add additional test scenarios to validate signal event
APIs such as setting signal from ISR, setting/clearing
each unique flag and few negative test cases too.
Signed-off-by: Praful Swarnakar <praful.swarnakar@intel.com>
Introduce test to check that only the thread which locks the mutex
shall be able to release it.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
The BT threads are interfering with the main thread priority selection
and the test fails semi-spuriously on NRF5x boards with "threads ran
too soon" (i.e. not an EDF failure per se, but the fact that the new
threads at K_LOWEST_APPLICATION_PRIO are running instead of the test
thread). This is a reasonable workaround for testing the
SCHED_DEADLINE ordering behavior, though.
Fixes#9843
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
While it's possible to define which mbedTLS config header to use, our
samples should use config-tls-generic.h as default because this header
is configurable through Kconfig.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Simple test for CONFIG_SCHED_DEADLINE. It creates a bunch of threads
at randome deadlines but within the same priority, and validates that
they run in the correct order.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
In NRF52 we need to write to a capture register to retrieve the current
counter value. This was missing for userspace implementation.
Fixes: GH-9676
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Building with !MULTITHREADING is designed for bootloaders and similar
minimal-functionality use cases. It's pathologically silly to combine
it with MMU drivers and address space partitioning, even though on
some architectures that technically works (on ARM, it seems not to).
The test intent was to disable this originally, but it turns out that
doesn't work. There is a TEST_USERSPACE kconfig symbol that also
needs to be explicitly turned off, otherwise it will reselect
USERSPACE against our wishes.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Add the missing sha256 crytographic algorithm testcase for
execution via ztest. The sub test case was not getting executed
as it was missed to be added in ztest suite.
Signed-off-by: Praful Swarnakar <praful.swarnakar@intel.com>
Added few more tests to cover all the message
send and receive scenarios. Added negative tests
to increase code coverage.
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
Fixes the gen_isr_table kernel test on mimxrt1050_evk by using data and
instruction synchronization barriers instead of disabling compiler
optimization on arm platforms. According to [1] section 4.5, "if a
pended interrupt request needs to be recognized immediately after being
enabled in the NVIC, add a DSB instruction and then an ISB instruction"
[1] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.dai0321a/BIHJDAAE.html
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This adds some test cases where the pipe buffer is smaller than
the size of data being pushed through the pipe.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Adds board-specific macros to enable the adc_api test to run on kinetis
boards. This restores the test to support all the nxp boards that were
supported before the new adc api was introduced.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This adds to the adc_api test board-specific configurations
for the following boards:
- nrf51_pca10028
- nrf52_pca10040
- nrf52840_pca10056
"adc" is indicated as supported in the yaml files for these boards
so that they are included in sanitycheck.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This commit replaces the API for ADC drivers with a reworked one.
As requested in the issue #3980, the adc_enable/adc_disable functions
are removed. Additionaly, some new features are introduced, like:
- asynchronous calls
- configuration of channels
- multi-channel sampling
Common parts of code that are supposed to appear in each implementation
of the driver (like locking, synchronization, triggering of consecutive
samplings) are provided in the "adc_context.h" file to keep consistency
with the SPI driver. Syscalls are no longer present in the API because
the functions starting read requests cannot use them, since they can be
provided with a callback that is executed in the ISR context, and there
is no point in supporting syscalls only for the channels configuration.
"adc_api" test is updated and extended with additional test cases,
with intention to show how the API is supposed to be used.
"adc_simple" test is removed as it does not seem to add much value.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
No need to have setup and teardown functions. Teardown will
even cause crash when tearing down last IPv4 test.
Fixes#9617
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Run networking tests for native_posix, qemu_x86 and qemu_cortex_m3
platforms only as the tests are generic enough so no need to run
them in real physical device.
Fixes#9623#9614#9622#9621#9618
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Few SoCs whose clock speed is very less will cause multiple ticks
to occur for 1 sec of sleep. For such a platform we cant run
the loops for over 5000 because the tick handler will get executed.
Thus rendering the test useless for such platforms. By reducing
the number of iterations we get the required benchmark results.
Fixes: GH-7906
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
For boards like nrf52 with low system clock (32768), k_busy_wait
for values less than 1 second (1000000 us) ends up waiting less
than the desired wait time because of decimal truncation while
converting wait time to hw clock cycles. Hence increased the wait
to 1 second.
Signed-off-by: Spoorthi K <spoorthi.k@intel.com>
For ARC MPU version 3, the defined partitions are not added to MPU
when appmem_init_app_memory is doning app_bss_zero().
So need to disable mpu first to allow appmem_init_app_memory to
access all partitions.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Add more stack for this test, it was failing and hidden by sanitycheck
(which needs to be fixed somewhere else).
Fixes#9664
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Added couple of negative tests for osSemaphoreWait
and osSemaphoreRelease to increase code coverage.
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
Add additional test usecases in cmsis mutex to check
maximum number of mutexes allowed at a time. Also, add
couple of negative tests for invalid parameter check.
Signed-off-by: Praful Swarnakar <praful.swarnakar@intel.com>
The test errors on Arduino_101 due to
limitations in power management driver
on the platform. Hence excluding this.
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
The stack size was way too less. Increasing the size to minimum
of 512 for all platforms.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Remove this feature specific to QMSI and available through samples only
to allow for migration to tracing hooks.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This patch provides support needed to get timing related
information from riscv32 based SOC.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
This patch provides support needed to get timing related
information from nios2 based SOC.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
This patch provides support needed to get timing related
information from xtensa based SOC.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Discard selected measurements that occur immediately before and
after the timer interrupt occurs. This causes fluctuations in the
time measured.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Add implementation of timestamp_serialize() for xtensa, nios2
and riscv. The implementation for the above architectures is an
empty function.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
This patch provides support needed to get timing related
information from ARC based SOC.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Added new KPIs for the userspace benchmarks.
1. Drop to user mode.
2. User thread Creation.
3. Syscall overhead.
4. Validation overhead k object init.
5. Validation overhead k object permission.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
WDT_NRFX is now enabling by default. Its configuration from proj.conf
files was removed.
Signed-off-by: Karol Lasończyk <karol.lasonczyk@nordicsemi.no>
Assisning system heap to the current thread.
And validate allocation and free memory from the same system
heap memory pool.
Signed-off-by: Ajay Kishore <ajay.kishore@intel.com>
Add checks so that we do not overflow the network interface
array. Similar issues was fixed in commit b4dae00741 for
TX timestamp tests.
Fixes#9465
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Refactor usage of net_sprint_ip*() where multiple
invocations are needed per single log call.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Fixes#9462
Coverity ID: 187670
Attempts to recalculate deltaBandwidth with no link lead to division by
zero.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
irq_lock returns an unsigned int, though, several places was using
signed int. This commit fix this behaviour.
In order to avoid this error happens again, a coccinelle script was
added and can be used to check violations.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Add testcase for validating poll events by manipultaing thread
state to improve code coverage. Also, add multiple threads to
wait on same event.
Signed-off-by: Praful Swarnakar <praful.swarnakar@intel.com>
Add tests for kernel managament APIs and enhance memory
pool tests with bulk allocation, free and negative cases.
Signed-off-by: Spoorthi K <spoorthi.k@intel.com>
PTS test cases MESH/NODE/TNPT/BV-07-C, MESH/NODE/TNPT/BV-12-C, requires
to receive 8 segment of data which summary requires 108 bytes of SDU.
This patch make test cases PASSing.
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@codecoup.pl>
Some locations like DHCPv4 client create a prefilled packet by appending
new fragments in a loop with one byte each via net_pkt_append_u8() which
is wasteful and noisy. This patch adds the new functions
net_pkt_append_memset() which creates fragments as needed in the desired
size and initialises it to the specified value.
This change also adds a unittest for the new function.
Prerequisite for #9287
Signed-off-by: Daniel Egger <daniel@eggers-club.de>
Commit ac92a01f5a changed the net_ipv6_hdr
definition. The ieee802154 fragment test wasn't updated to match this
change.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Commit 8525944c54
tests: power: refactor power_states test
Re-introduced CONFIG_ARC_INIT=n that isn't required and causes build
errors for sanitycheck.
Fixes#9444
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Rather than having some implied name for the logging name, explicitly
pass it in the macros LOG_MODULE_REGISTER & LOG_MODULE_DECLARE.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Consistently use
config FOO
bool/int/hex/string "Prompt text"
instead of
config FOO
bool/int/hex/string
prompt "Prompt text"
(...and a bunch of other variations that e.g. swapped the order of the
type and the 'prompt', or put other properties between them).
The shorthand is fully equivalent to using 'prompt'. It saves lines and
avoids tricking people into thinking there is some semantic difference.
Most of the grunt work was done by a modified version of
https://unix.stackexchange.com/questions/26284/how-can-i-use-sed-to-replace-a-multi-line-string/26290#26290, but some
of the rarer variations had to be converted manually.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Prepend the text 'cmake_minimum_required(VERSION 3.8.2)' into the
application and test build scripts.
Modern versions of CMake will spam users with a deprecation warning
when the toplevel CMakeLists.txt does not specify a CMake
version. This is documented in bug #8355.
To resolve this we include a cmake_minimum_required() line into the
toplevel build scripts. Additionally, cmake_minimum_required is
invoked from within boilerplate.cmake. The highest version will be
enforced.
This patch allows us to afterwards change CMake policy CMP000 from OLD
to NEW which in turn finally rids us of the verbose warning.
The extra boilerplate is considered more acceptable than the verbosity
of the CMP0000 policy.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
This commit replaces exact time compassion by a range check, allowing
the tests to pass on platforms which needs rounding in __ticks_to_ms()
and _ms_to_ticks().
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
This finishes refactor of splitting off net_config library name from
net_app library, started in c60df1311, c89a06dbc. This commit makes
sure that Kconfig options are prefixed with CONFIG_NET_CONFIG_
instead of CONFIG_NET_APP_, and propagates these changes thru the
app configs in the tree.
Also, minor dependency, etc. tweaks are made.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The frdm_kw41z runs at a much slower clock frequency than the frdm_k64f.
Increase the k_poll timeout in the asynchronous callback thread to allow
the spi transaction to complete on frdm_kw41z.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The testcase was using only SYS_LOG_ERR() to signal error conditions,
which would print useful error information to the console, but allow the
test to pass when it should fail. Add zasserts after every SYS_LOG_ERR()
to make the test fail properly.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The asynchronous callback thread was overflowing its stack and causing a
bus/mpu fault when hardware stack checking is enabled. Increase the size
of the stack.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Make it possible to have multiple identity addresses as an LE
peripheral. For central role only the default identity is supported
for now. This also extends the flash storage in a backward compatible
way.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add system calls for the zsock implementations of socket,
close, bind, connect, listen, accept, sendto, recvfrom,
fcntl, poll, inet_pton, and getaddrinfo.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Refactored test to work with ztest framework
and to calculate and display time in milliseconds
for each power state.
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
In addition to testing all the APIs, this enhancement
tests the following two scenarios
- when multiple threads use a single key for storage
- when a single thread associates its value with
multiple keys
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
This stub was forcing this configuration option that is not neccesary
and the configuration system is complaining about it, failing most
Arduino101 stub builds.
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
These are no longer required. Kconfiglib expands references to
environment variables directly.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Up until now, Zephyr has patched Kconfig to use the last 'default' with
a satisfied condition, instead of the first one. I'm not sure why the
patch was added (it predates Kconfiglib), but I suspect it's related to
Kconfig.defconfig files.
There are at least three problems with the patch:
1. It's inconsistent with how Kconfig works in other projects, which
might confuse newcomers.
2. Due to oversights, earlier 'range' properties are still preferred,
as well as earlier 'default' properties on choices.
In addition to being inconsistent, this makes it impossible to
override 'range' properties and choice 'default' properties if the
base definition of the symbol/choice already has 'range'/'default'
properties.
I've seen errors caused by the inconsistency, and I suspect there
are more.
3. A fork of Kconfiglib that adds the patch needs to be maintained.
Get rid of the patch and go back to standard Kconfig behavior, as
follows:
1. Include the Kconfig.defconfig files first instead of last in
Kconfig.zephyr.
2. Include boards/Kconfig and arch/<arch>/Kconfig first instead of
last in arch/Kconfig.
3. Include arch/<arch>/soc/*/Kconfig first instead of last in
arch/<arch>/Kconfig.
4. Swap a few other 'source's to preserve behavior for some scattered
symbols with multiple definitions.
Swap 'source's in some no-op cases too, where it might match the
intent.
5. Reverse the defaults on symbol definitions that have more than one
default.
Skip defaults that are mutually exclusive, e.g. where each default
has an 'if <some board>' condition. They are already safe.
6. Remove the prefer-later-defaults patch from Kconfiglib.
Testing was done with a Python script that lists all Kconfig
symbols/choices with multiple defaults, along with a whitelist of fixed
symbols. The script also verifies that there are no "unreachable"
defaults hidden by defaults without conditions
As an additional test, zephyr/.config was generated before and after the
change for several samples and checked to be identical (after sorting).
This commit includes some default-related cleanups as well:
- Simplify some symbol definitions, e.g. where a default has 'if FOO'
when the symbol already has 'depends on FOO'.
- Remove some redundant 'default ""' for string symbols. This is the
implicit default.
Piggyback fixes for swapped ranges on BT_L2CAP_RX_MTU and
BT_L2CAP_TX_MTU (caused by confusing inconsistency).
Piggyback some fixes for style nits too, e.g. unindented help texts.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The test read_kobject_user_pipe() is called twice in
the test suite. There is no need of calling same test
twice. Removing the extra call.
Signed-off-by: Spoorthi K <spoorthi.k@intel.com>
As ethernet_api is larger than net_if_api, and we are accessing
ethernet_api elements in ethernet L2 driver, then invalid memory
was accessed in L2 ethernet.c.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add new test cases to validate dynamic memory allocation
functions such as malloc, calloc, realloc using minimal libc
and newlibc implementation of standard C library.
Signed-off-by: Praful Swarnakar <praful.swarnakar@intel.com>
This adds two test cases to create dynamic threads, and one test
case to make sure permissions are set correctly.
Origin: Original
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The kernel.queue.poll test fails if CONFIG_MAX_THREAD_BYTES is larger
than 2, complaining about no memory for semaphore object. Turns out
the memory pool is not large enough. So make it a bit larger.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Make sure that net_if_ipv6_select_src_iface() returns correct network
interface for a given destination address.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
With this commit all Qav parameters are tested and the fake driver
properly stores and recalculates info about all the Qav parameters to
make them available for read-back.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
The new mappings require at least two traffic classes so there are fewer
tests than there are for the strict mapping.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
In coap module previous test cases are modified as well as
new test functions are added to increase the code coverage
Signed-off-by: Tarun Kumar Agarwal <tarun.kumar.agarwal@intel.com>
Input length was accounting TC_AES_BLOCK_SIZE twice and consequently
not considering the whole cipher.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
As the test is testing neighbor discovery which needs to know
link addresses, we must run the test using Ethernet L2.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
- Remove redundant 'n' defaults. 'n' is the default value for bool
symbols.
This makes the auto-generated documentation clearer as well: You get
"implicitly defaults to n" instead of
"- n if <propagated dependencies>".
- Shorten
<type>
prompt "foo"
to
<type> "foo"
This works for all types, not just bool.
- Various formatting nits.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
There are too many individual requests for Qav related parameters. There
are more Qav parameters that need to be supported (and will be supported
soon - both on the GET and SET side). Handling it the way it was handled
so far would render the eth mgmt API dominated by Qav parameters. That
would make the file hard to read and understand.
Instead of that - use a single GET and SET requests for all Qav
parameters. This works by adding a separate enum with Qav request type
to the ethernet_qav_param struct.
Additionally this approach makes it much easier to document it all since
we now have just a single request and documentation comments in the
ethernet_qav_param struct.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Add descriptions and doxygen groups for app_memory,
stack_protection, stack_randomization and
obj_validation.
Signed-off-by: Spoorthi K <spoorthi.k@intel.com>
This commit changes how the fake driver stores info about priority
queues. This allows it to test the Qav status API.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Test that we can define our own system calls in application code
and that fault handling works properly.
Additional tests for base system call infrastructure, outside of
specific system calls, go here.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add basic IPv4 Link Local support as described in RFC 3927.
Signed-off-by: Matthias Boesl <matthias.boesl@gmail.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It shouldn't be necessary to disable the mpu for this test. Enable
CONFIG_MPU_ALLOW_FLASH_WRITE=y instead.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The flash API requires write protection to be disabled before erasing
the flash. It appears that the nordic platforms for which this test was
originally implemented do not enforce the requirement to disable write
protection. The mcux flash driver, however, does enforce the
requirement, so fix the test to make it work on kinetis platforms.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Some drivers or tests need to execute some code before Zephyr is
booted, dynamically register command line arguments, etc.
For this purpose, we generalize the NATIVE_EXIT_TASK to also
provide hooks to run a function at a given point during the startup
of native_posix.
Also, test/boards/native_posix/exit_tasks is generalized to cover
this new functionality.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Test to verify k_thread_user_mode_enter() when usermode is
not enabled or supported by architecture. The thread which calls
k_thread_user_mode_enter() with CONFIG_USERSPACE disabled or
architecture doesn't support usermode, should be marked
as usermode and if it is essential, then it has to be cleared.
This is added to improve code coverage.
Signed-off-by: Spoorthi K <spoorthi.k@intel.com>
Some Ethernet devices can filter out incoming packets through a list of
valid MAC addresses, so let's add a way to expose this capability, using
it through the ethernet device API.
Fixes#7596
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Disable CONFIG_I2C and CONFIG_SPI for minimum footprint test,
since we are doing "minimum" footprint.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This commit adds the get_config callback to the fake driver and makes
use of it to get the number of priority queues. That number is in turn
used in Qav tests.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
New testcase sets max value to zero and checks if install function
fails.
Improvement introduces k_yield and k_sleep in while loops to make zephyr
responding.
Signed-off-by: Karol Lasończyk <karol.lasonczyk@nordicsemi.no>
Move k_thread_foreach() API test from tests/kernel/profiling to
tests/kernel/threads/thread_apis.
Fixes#7966
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Summary: revised attempt at addressing issue 6290. The
following provides an alternative to using
CONFIG_APPLICATION_MEMORY by compartmentalizing data into
Memory Domains. Dependent on MPU limitations, supports
compartmentalized Memory Domains for 1...N logical
applications. This is considered an initial attempt at
designing flexible compartmentalized Memory Domains for
multiple logical applications and, with the provided python
script and edited CMakeLists.txt, provides support for power
of 2 aligned MPU architectures.
Overview: The current patch uses qualifiers to group data into
subsections. The qualifier usage allows for dynamic subsection
creation and affords the developer a large amount of flexibility
in the grouping, naming, and size of the resulting partitions and
domains that are built on these subsections. By additional macro
calls, functions are created that help calculate the size,
address, and permissions for the subsections and enable the
developer to control application data in specified partitions and
memory domains.
Background: Initial attempts focused on creating a single
section in the linker script that then contained internally
grouped variables/data to allow MPU/MMU alignment and protection.
This did not provide additional functionality beyond
CONFIG_APPLICATION_MEMORY as we were unable to reliably group
data or determine their grouping via exported linker symbols.
Thus, the resulting decision was made to dynamically create
subsections using the current qualifier method. An attempt to
group the data by object file was tested, but found that this
broke applications such as ztest where two object files are
created: ztest and main. This also creates an issue of grouping
the two object files together in the same memory domain while
also allowing for compartmenting other data among threads.
Because it is not possible to know a) the name of the partition
and thus the symbol in the linker, b) the size of all the data
in the subsection, nor c) the overall number of partitions
created by the developer, it was not feasible to align the
subsections at compile time without using dynamically generated
linker script for MPU architectures requiring power of 2
alignment.
In order to provide support for MPU architectures that require a
power of 2 alignment, a python script is run at build prior to
when linker_priv_stacks.cmd is generated. This script scans the
built object files for all possible partitions and the names given
to them. It then generates a linker file (app_smem.ld) that is
included in the main linker.ld file. This app_smem.ld allows the
compiler and linker to then create each subsection and align to
the next power of 2.
Usage:
- Requires: app_memory/app_memdomain.h .
- _app_dmem(id) marks a variable to be placed into a data
section for memory partition id.
- _app_bmem(id) marks a variable to be placed into a bss
section for memory partition id.
- These are seen in the linker.map as "data_smem_id" and
"data_smem_idb".
- To create a k_mem_partition, call the macro
app_mem_partition(part0) where "part0" is the name then used to
refer to that partition. This macro only creates a function and
necessary data structures for the later "initialization".
- To create a memory domain for the partition, the macro
app_mem_domain(dom0) is called where "dom0" is the name then
used for the memory domain.
- To initialize the partition (effectively adding the partition
to a linked list), init_part_part0() is called. This is followed
by init_app_memory(), which walks all partitions in the linked
list and calculates the sizes for each partition.
- Once the partition is initialized, the domain can be
initialized with init_domain_dom0(part0) which initializes the
domain with partition part0.
- After the domain has been initialized, the current thread
can be added using add_thread_dom0(k_current_get()).
- The code used in ztests ans kernel/init has been added under
a conditional #ifdef to isolate the code from other tests.
The userspace test CMakeLists.txt file has commands to insert
the CONFIG_APP_SHARED_MEM definition into the required build
targets.
Example:
/* create partition at top of file outside functions */
app_mem_partition(part0);
/* create domain */
app_mem_domain(dom0);
_app_dmem(dom0) int var1;
_app_bmem(dom0) static volatile int var2;
int main()
{
init_part_part0();
init_app_memory();
init_domain_dom0(part0);
add_thread_dom0(k_current_get());
...
}
- If multiple partitions are being created, a variadic
preprocessor macro can be used as provided in
app_macro_support.h:
FOR_EACH(app_mem_partition, part0, part1, part2);
or, for multiple domains, similarly:
FOR_EACH(app_mem_domain, dom0, dom1);
Similarly, the init_part_* can also be used in the macro:
FOR_EACH(init_part, part0, part1, part2);
Testing:
- This has been successfully tested on qemu_x86 and the
ARM frdm_k64f board. It compiles and builds power of 2
aligned subsections for the linker script on the 96b_carbon
boards. These power of 2 alignments have been checked by
hand and are viewable in the zephyr.map file that is
produced during build. However, due to a shortage of
available MPU regions on the 96b_carbon board, we are unable
to test this.
- When run on the 96b_carbon board, the test suite will
enter execution, but each individaul test will fail due to
an MPU FAULT. This is expected as the required number of
MPU regions exceeds the number allowed due to the static
allocation. As the MPU driver does not detect this issue,
the fault occurs because the data being accessed has been
placed outside the active MPU region.
- This now compiles successfully for the ARC boards
em_starterkit_em7d and em_starterkit_em7d_v22. However,
as we lack ARC hardware to run this build on, we are unable
to test this build.
Current known issues:
1) While the script and edited CMakeLists.txt creates the
ability to align to the next power of 2, this does not
address the shortage of available MPU regions on certain
devices (e.g. 96b_carbon). In testing the APB and PPB
regions were commented out.
2) checkpatch.pl lists several issues regarding the
following:
a) Complex macros. The FOR_EACH macros as defined in
app_macro_support.h are listed as complex macros needing
parentheses. Adding parentheses breaks their
functionality, and we have otherwise been unable to
resolve the reported error.
b) __aligned() preferred. The _app_dmem_pad() and
_app_bmem_pad() macros give warnings that __aligned()
is preferred. Prior iterations had this implementation,
which resulted in errors due to "complex macros".
c) Trailing semicolon. The macro init_part(name) has
a trailing semicolon as the semicolon is needed for the
inlined macro call that is generated when this macro
expands.
Update: updated to alternative CONFIG_APPLCATION_MEMORY.
Added config option CONFIG_APP_SHARED_MEM to enable a new section
app_smem to contain the shared memory component. This commit
seperates the Kconfig definition from the definition used for the
conditional code. The change is in response to changes in the
way the build system treats definitions. The python script used
to generate a linker script for app_smem was also midified to
simplify the alignment directives. A default linker script
app_smem.ld was added to remove the conditional includes dependency
on CONFIG_APP_SHARED_MEM. By addining the default linker script
the prebuild stages link properly prior to the python script running
Signed-off-by: Joshua Domagalski <jedomag@tycho.nsa.gov>
Signed-off-by: Shawn Mosley <smmosle@tycho.nsa.gov>
The number of buffres influences e.g. the maximum SDU size, which in
turn influences call stack consumption. Use lower values where a high
number of buffers isn't necessary, and use the default (6) where it's
sufficient.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
It is not necessary to link 'app' with ELMFAT or NFFS because their
usage requirements are covered by the 'APP_LINK_WITH_MBEDTLS'
mechanism that automatically links 'app' with the interface library
FS.
This patch removes the redundant target_link_libraries invocations.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Do not enter Low Power states once the test execution is done. This is
is needed to avoid the flashing issues which were seen when system is
in deep sleep states.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Added test to cover the case where the app can start the timer
even before the previous one is expired. In this case the timer
will start with latest settings or params.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Added a simple test to validate the real time control and
RTC functionality
Note that this test depends too much on not having a high host
load to pass.
Therefore it is better to not run in it automated regression
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
This test is intended to validate k_msgq_alloc_init()
and k_msgq_cleanup(), when CONFIG_USERSPACE is not defined.
Also added test to validate k_msgq_get() api, if any thread is
pending to write in message queue.
Signed-off-by: Ajay Kishore <ajay.kishore@intel.com>
Modify test to cover k_queue_insert() and k_queue_alloc_prepend(),
and allocation failure/success scenario.
Signed-off-by: Spoorthi K <spoorthi.k@intel.com>
This test is intended to validate k_stack_cleanup() and
k_stack_alloc_init(). Passed stack pointer in k_stack_alloc_init()
is statically defined.
Signed-off-by: Ajay Kishore <ajay.kishore@intel.com>
Test that user is able to turn on/off promiscuous mode and
also receive any data from network interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that user is able to toggle promiscuous mode flag
in network interface level and that flag value is passed
to device driver.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Test in ethernet mgmt level that promiscuous flag is passed
properly to the device driver.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Current implementation does not handle large extension headers
(e.g HBHO). Which resulted network stack crashes or due to
misinterpretation of lengths network packets are dropped. Also
caused issues while preparing IPv6 packet (e.g. large HBHO header
with IPv6 fragmentation support).
Issues fixed and provided more unit tests.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
name command can be used to read or write the GAP Device Name which is
used by the advertise command.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
No need to run the tests in real hardware as there we can run
out of network buffers that happened with Atmel SAM-E70.
Fixes#8966
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Generate proper error if we run out of network buffers which means
so that the test can fail properly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Set device state to DEVICE_PM_ACTIVE_STATE before making it busy.
Also improves the kernel/device.c coverage.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Add test for z_early_boot_rand32_get() API.
This also improves the coverage for kernel/init.c
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
On some architectures tick time cannot be expressed as integer
number of microseconds, introducing error in calculations using
sys_clock_us_per_tick variable.
This commit deprecates the sys_clock_us_per_tick variable and
replaces its usage by more precise calculations based on
sys_clock_hw_cycles_per_sec and sys_clock_ticks_per_sec.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
This commit replaces _TICK_ALIGN correction in the test (which was based
on simple division), by more precise estimation using __ticks_to_ms()
and _ms_to_ticks() functions.
This commit fixes#8899.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Enter SYS_POWER_STATE_CPU_LPS_2(C2LP) state on Lakemont to achieve
the Low Power Sensing Standby(LPSS) state on Quark SE C1000.
Also added a busy loop to have syncronization b/w x86 and ARC
console outputs.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
On Quark SE, to enter the Low Power Sensing Standby(LPSS) State,
ARC can enter the Deep Sleep state (LPSS bit enable + SS2) and
wait for the Lakemont core to enter C2 or C2LP state.
To achieve LPSS, ARC core enters the Deep Sleep state much before
the Lakemont core enters the C2 or C2LP state and waits for the
LPSS entry.
Also fixed the Deep Sleep state entry according to the Quark SE C100
documentation.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Define or enable the power states as per architecture (x86 or ARC).
Remove the redundant and unneccessary config options from
prj_tickless.conf file
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Added a simple test case for pthread_key, which
tests all the APIs - the thread creates a key,
sets a value to the key, retrieves and asserts
they are equal, and then deletes the key.
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
In some hw like Atmel SAM-E70, the original amount of network
buffers is too small so increasing it slightly.
Also generate proper error if this happens in the test so it
is easier to figure out.
Fixes#8865
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add test description, RTM links and doxygen links for common,
interrupt and boot page table test cases.
Signed-off-by: Spoorthi K <spoorthi.k@intel.com>
The test app creates two network interfaces, one for simulating
local device and the other one for peer device. Make sure that
the tests use correct network interface in each test. We cannot
guarantee that net_if_get_default() will always return correct
interface in different architectures as that depends how the
net_if structs are placed in corresponding linker section.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add test case description and doxygen groups for tracebility.
Add references to APIs being tested in timer component.
Signed-off-by: Praful Swarnakar <praful.swarnakar@intel.com>
ESP32 does not like newlib, exclude for now to get a clean sanitycheck
run. We have issues about this already.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Log API can be used before user can explicitly initialize the logger.
In order to ensure that logger core is ready to buffer log messages
it must be initialize as early as possible. Initialization does not
include initialization of default backend since driver may not be
ready and backend is needed only when log messages are processed.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
In some hw like Atmel SAM-E70, the original amount of network
buffers is too small so increasing it slightly.
Also generate proper error if this happens in the test so it
is easier to figure out.
Fixes#8866
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
A HID application can no longer write to the default
interrupt IN endpoint because the addresses are assigned
dynamically. Add hid_int_ep_write() function and leave
it to the hid-core to call the usb_write() with the correct
endpoint address.
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
For some reason %F wasn't supported initially. Its simple enough to
handle the case difference in infinity and NaN handling to add support
for %F.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The C standard says that %f should use '[-]inf' or '[-]infinity' (which
style is implementation defined) for infinity handling and '[-]nan' for
NaN.
We where adding a '+' and had the wrong case for 'inf' and 'nan'.
Before -> After
+INF -> inf
-INF -> -inf
NaN -> nan
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
For %{e,E,g,G} conversion specifiers the C standard says the exponent
contains at least two digits, and only as many digits are necessary. So
instead of 1.234000e-001 we should have 1.234000e-01.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Updated test description for tickless test cases, grouped test cases
as per doxygen requirements and some uncrustify's cosmetic changes.
Signed-off-by: Spoorthi K <spoorthi.k@intel.com>
The new JSON_OBJ_DESCR_ARRAY_ARRAY allows use of an array of
array. The macro is based on the comments and directions provided by
Leandro Pereira <leandro.pereira@intel.com> (in #8567).
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Christian Tavares <christian.tavares@ossystems.com.br>
The cb_[1|2]_called variables were initialized just before running
the test. This was too late as in some cases the Trickle timer
was triggered before the variables were init, which then caused the
test to fail even though there was no actual timer failure.
This was seen with frdm_k64f and when CONFIG_BOOT_DELAY=1000 was set.
Fixes#8658
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The return value from the k_mem_slab_alloc was not read. Hence
adding code to make use of this return value.
Fixes: GH-6681
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
The problem is that net_if_call_timestamp_cb only checked if the
callback was registered for the PORT which invoked the whole action.
There is a possibility, that the callback will be registered, and packet
A will be passed to eth driver. Before the driver is finished with
packet A, network layer will start handling another packet (B) - so it
will unregister the callback for packet A and register it for B. After
that the network driver will finish processing packet A and invoke the
timestamp callback. The mechanism would then only check if a callback is
registered for the port of the driver and invoke the callback for the
packet that was registered earlier (so A instead of B).
This commit fixes that by storing info not only about the port but about
the packet too.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
The current test expects particular order of cap_webusb and cap_msosv2
structures, create alternative structure for comparison.
Fixes: #8732
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Updated ztest_mock.c to support multiple calls to same mock function
within a single function under test. This allows sequencing mock
return values for improved decision coverage in a test, or simply
when a given function under test calls the same function more than
once with different parameters, or different return values.
Signed-off-by: Morten Priess <mtpr@oticon.com>
If the sys_rand32_get() returns large value, then we might
decrement the clock which is not intended in this test.
Fixes#8657
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add a new test to make I2C transfers between an I2C controller and
an I2C slave driver, either by:
- Using a virtual I2C driver
- Using a physical link and 2 physical controllers
The Physical test uses :
- Two EEPROM Slave drivers each connected to one I2C controller
- Both I2C controllers also act as master and take turns writing
to the opposite EEPROM Slave.
All of this connected physically on the board.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Daniel Wagenknecht <wagenknecht@clage.de>
The kernel incorrectly assumed, that system timer frequency is always
divisible without remainder by couple "natural" tick rates (like 100).
As result on some SoCs, time calculations was not correct, producing
strange effects (invalid sleep times, incorrect k_uptime_get() etc.).
This commit enables accurate, but costly (using 64-bit math) tick <-> ms
conversion if the selected tick interval is not exact due to hardware
limitations.
Also, this commit fixes tests in which removed _ms_per_tick were used.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
These two tests ask for lots of priority levels, more than the 32
maximum allowed by SCHED_MULTIQ (which is by design: if you have
requirements like that DUMB or SCALABLE are better choices due to the
RAM overhead of MULTIQ), so the build will fail on boards that defined
MULTIQ as default.
Don't let the platform choose the scheduler backend, ask for SCALABLE
explicitly.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Now that it is possible to easily add Kconfig options from command
line, we do not need to always compile native_posix with coverage.
This was done only to have it set easily for sanity_check.
So do not select it anymore, and let users choose if they
want coverage dumps or not.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Split out definition of net_app_init() and its parameter flags from
net_app.h header to new net_config.h header. As we do this, rename
the function to net_config_init() and flags to NET_CONFIG_NEED_*.
This is a second step in splitting out network configuration API
out of net_app API, started in the c60df1311 commit.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Introduce TC_RESULT_TO_STR to convert from an integer test result to a
string like "PASS", "FAIL", "SKIP". Do this to remove the defines of
PASS/FAIL/SKIP since those names might get used by other code and to
have a single consistent way of doing the conversion.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This test is failing for the frdm platform because
the ADC_DEVICE_NAME is different. Add #if statements
to correct for respective platform names.
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
GCC 7 and newer are smart enough to realize that in test_snprintf()
the output will not fit in 0 or 4 bytes, but that it requires 9.
So it throws a warning in compile time. But in this case we are
actually testing that snprintf's return value is what it should be
while truncating the output. So let's suppress this warning here.
Fixes: #5732
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Exclude building the btshell and mesh_shell application for
NRF52810_PCA10040 boards due to limited RAM and Flash
availability on the nRF52810 SoC.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The test verifies that the mock framework can handle functions
under test which call more than one mock function, and
correctly processes each call.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Calling __builtin_ffsl(neg_bitmap) returns first bit set in the word,
e.g. 4 if bitmap is 11111000. As this must translate to zero-based index
3, one must be subtracted from the result.
Signed-off-by: Morten Priess <mtpr@oticon.com>
It is not necessary to link 'app' with mbedTLS because mbedTLS is
covered by the 'APP_LINK_WITH_MBEDTLS' mechanism that automatically
links 'app' with mbedTLS.
This patch removes the redundant target_link_libraries invocations.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The SSE and SSE_FP_MATH configs exist only in the x86 architecture, so
extract them to a separate prj_x86.conf file for the fp_sharing test.
Fixes Kconfig warnings when building the test for frdm_k64f:
- warning: attempt to assign the value "y" to the undefined symbol SSE
- warning: attempt to assign the value "y" to the undefined symbol
SSE_FP_MATH
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
When adding the nRF52810, which has 24KB of RAM, some of the tests don't
compile anymore due to lack of SRAM. Address this by either filtering
the test out or reducing the amount of memory allocation.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Test that Tx timestamp callback code is called properly if network
packet timestamping is enabled.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove the CMakeLists.txt file that is in the 'common' directory of
nffs_fs_api. It has likely been added by mistake as it does not make
any sense as it is written.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
All architecture defines OCTET_TO_SIZEOFUNIT and SIZEOFUNIT_TO_OCTET
as identity functions. But the only user is tests/benchmarks/app_kernel.
It's effectively a no-op. Remove them.
Signed-off-by: Yasushi SHOJI <y-shoji@ispace-inc.com>
UART_PIPE_ON_DEV_NAME is set to UART_1 by default in
boards/arm/qemu_cortex_m3/qemu_cortex_m3.dts
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Restructured the test, added description and enhanced
semaphore count logic to check for semaphores created
only in the test.
Fixes: #7106
Signed-off-by: Spoorthi K <spoorthi.k@intel.com>
The ARRAY_SIZE() utility macro will actually test the parameter types,
and ensure that it is only called with arrays, and not arrays decayed
to pointers.
Changes were performed with a simple Coccinelle script.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
This is a feature Ben added so you could use Zephyr's arch layer to
bootstrap things like bootloaders without sucking in the whole kernel.
And it's worked until now.
But we never had a test for it, and I just broke it with the scheduler
rework. Add a trivial test just to make sure this continues to link
and run. Longer term it would be nice to have some kind of size
metric here to guarantee that the feature stays lean and doesn't pull
in needless code.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Previously, ARC .config's would get built for this test, giving Kconfig
warnings along the lines of
warning: NUM_IRQS ... was assigned the value "3" but got the value
"38". Check its dependencies...
Add an 'arch_whitelist: arm' so that .configs only get built for ARM.
These warnings will soon be turned into errors.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This fixes an issue of system workqueue stack overflow that was
was observed during Bluetooth Mesh automated testing.
Increase system workqueue stack to avoid MPU faults.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Fixes#8262
The test kernel.sched.preempt was hanging in the posix arch,
due to a busy wait loop in wakeup_src_thread() added in
a803af2fa7.
We fix it by halting the cpu to let time pass in the posix
arch.
Reenabling the testcase in this board by reverting
e8a906c29c
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
The native_posix board does model irq_offload properly now
and therefore this test can be executed without problems.
So let's enable it.
Related to commit:
86b5364335
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Because the address and size alignment of MPUv2,
limite the thread numbers for emsk_em7d_v22.
If not, build will faill because of DCCM overflow
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Even CONFIG_HW_STACK_PROTECTION is no here,
it is still yes as it will be re-selected by
CONFIG_TEST_HW_STACK_PROTECTION in tests/Kconfig.
So the correct setting here is:
CONFIG_TEST_HW_STACK_PROTECTION=n
This fixes#8092 (case1)
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
The return value from k_fifo_get() might be NULL in some situations,
so protect against that.
Coverity-ID: 186190
Coverity-ID: 186058
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Fail in tests where we have an OOPS or a panic. Right now and in many
cases we continue and test case might be reported as PASS.
Cases that have the tag ignore_faults will ignore those faults (cases
that are testing faults for example).
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Since on ARM CONFIG_NUM_IRQS option has no prompt, it cannot be properly
overridden by a prj.conf fragment. Instead make it have a prompt for
this particular test to be able to override it properly.
Fixes#8200
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
We are getting stack corruption on some platforms, so increase stack to
allow the test to run.
Fixes#8085
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Both the vlan and checksum_offload tests expect to be run in
controlled environment where the test application is providing
ethernet connectivity. If the board under test has also ethernet
support, then internal checks will fail in the test application.
Because of this, disable on board ethernet so that the tests will
pass.
Fixes#8172
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The icmpv6, http_header_fields, mqtt_packet, dns_packet and
net utils tests were failing in frdm-k64f because of too small
stack.
Fixes#8171
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
`mmsg` should be fully initialized prior to calling k_mbox_get(). The
mailbox implementation (mainly, mbox_message_match()) will look inside
the second parameter passed to k_mbox_get() in order to determine if
which pending messages should be returned to the caller.
Fixes Valgrind warning listed in #7478.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Scheduler choice is subtle across yield and k_sleep(), add calls to
those to the state table and validate that we're making the right
decisions.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
True stack sizes may be rounded up, instead of using a multiplier
just fetch the true stack size and add one to it, just one byte
over should produce an error.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Commit 4ef36a4b54 ("tests/kernel/mem_slab: Fix memory overcommit")
caught this error, but missed the fact that there are two slabs that
need to be resized. I also failed to properly explain (or, to be
honestly, fully understand) the deadlock condition, so add a nice big
comment explaining it.
Basically: you have a bunch of threads that can allocate all but one
of their blocks before trying to allocate their last one and pending.
There must be at least one block left so all the threads don't
symmetrically go to sleep waiting on each other.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
In this fix we are asserting the return value of pthread_attr_init.
Resolves#7084
Coverity-CID: 185280
Signed-off-by: Sritej Kanakadandi Venkata Rama <sritej.kvr@gmail.com>
Tests failed on the target because flash area reserved
for fcb data storage was to small.
This path add dts overlay file for nrf52_pac10040 board which
increases this flash area to proper size.
Fixes#8038
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Call k_thread_foreach only once from _sys_soc_suspend()
otherwise it will flood the console with stack dumps. As per
the test implementation, the one time call happens through
test_call_stacks_analyze_idle test case.
Also removed the the stack size comparision logic from
thread_callback() as the actual size allocated could be
different from what is requested based on the Kconfig option
CONFIG_MPU_REQUIRES_POWER_OF_TWO_ALIGNMENT
Fixes Issue #7858
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
This test spawned 4 threads all of which try to allocate 3 blocks from
the same mem_slab before freeing any, leading to a maximum of 12
in-flight allocations. But the slab contained only 3 blocks!
Most of the time it passed, but CI caught it failing on occasion,
possibly more often now due to recent scheduler changes. Fixes#8069
(hopefully).
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The idea behind this test is to race two CPUs against each other,
validating that each is truly running simultaneously. But it just
assumed that the other thread/cpu would start synchronously as soon as
k_thread_create() returned.
Normally, that works fine. But while debugging I added some code that
was slowing down entry to the other thread (or maybe the return from
k_thread_create() into the main thread) long enough to allow one
thread to get a significant head start. That breaks the logic in the
test and things were inexplicably "failing".
Put a spin loop around the count so that the main thread can start
counting to within the memory system's ability to inform it of the
change from the other thread.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Disable userspace for benchmarks because it changes the KPI
numbers. It will be re-enabled once the required code is
in place.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Disable userspace for benchmarks because it changes the KPI
numbers. It will be re-enabled once the required code is
in place.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Disable userspace for benchmarks because it changes the KPI
numbers. It will be re-enabled once the required code is
in place.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Disable userspace for benchmarks because it changes the KPI
numbers. It will be re-enabled once the required code is
in place.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Disable userspace for benchmarks because it changes the KPI
numbers. It will be re-enabled once the required code is
in place.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Disable userspace for benchmarks because it changes the KPI
numbers. It will be re-enabled once the required code is
in place.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Disable userspace for benchmarks because it changes the KPI
numbers. It will be re-enabled once the required code is
in place.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
* because stack analysis is required, so STACK_CHECK must be
turned off. No HW_STACK_PROTECTION has no impact on current test
* If CONIFG_USERSPACE, the real stack size is bigger than the declared
stack size
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
In arc, privileged stack is merged into defined stack. So
the real stack size should add privileged stack size.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
This redirects PRINT() to printf() and not printk() and
was causing stack overflows on some platforms.
Fixes: #8033
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This symbol was renamed by commit 14e73e73c3 ("net: Make DEBUG config
option naming consistent"), but an assignment (and a commented-out
assignment) to the old name remained.
Fix the assignments to use the new name.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
These are no longer needed since commit 4dc9e5b2de ("kconfig: Get rid
of 'option env' bounce symbols"). The C tools are likely to get rid of
them soon too.
The APPLICATION_BASE symbol (option env="PROJECT_BASE") triggered a
compatibility warning, because 'option env' symbols now need to have the
same name as the environment variables they reference to be compatible
with Kconfiglib. APPLICATION_BASE is unused, so just remove it.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
These symbols were removed in commit ed26b95746 ("drivers/gpio:
Removing dts generated options in QMSI Kconfig").
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
DNS_RESOLVER_MAX_SERVERS has the range [1,NET_MAX_CONTEXTS], with
NET_MAX_CONTEXTS being set to 4, but is set to 5. Out-of-range .config
values are ignored, so the symbol reverts to its default value (1).
Increase NET_MAX_CONTEXTS to 5. DNS_SERVER{1-5} being set probably
implies that DNS_RESOLVER_MAX_SERVERS shouldn't be decreased to 4.
This fixes two Kconfig warnings (out-of-range + didn't get assigned
value).
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The test was using ztest incorrectly exposing everything as one single
test function. We now have multiple tests that can be tracked back to
features and requirements.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We were referring to old function names and still using the task
terminology which can be confusing.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Userspace doesn't necessarily imply stack overflow protection
for supervisor threads. Enable this as well if the hardware
supports it.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This test exaustively tests preemption points between threads of all
priority classes (cooperative, preemptible, and metairq), done both
from a synchronous reschedule (via k_sem_give() and from interrupt
context (via irq_offload()), and with and without the sched_lock()
held. It then detects the next thread that runs and validates vs. the
documented priority rules.
Note that there is a whitelisted case on ARM, where irq_offload()
seems not to be working like a true interrupt (it always returns to
the interrupted context and doesn't seem to hit the normal exception
return path which can context switch). And native_posix is excluded
because of failures and the fact that it's actually never possible to
truly preempt a thread there (they run to completion inside _Swap()
et. al. and then block themselves). Both of these should be fixable
in the future but don't (seem to) directly relate to this test.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
These symbols were renamed by commit bf964cdd4c ("net: Renaming net
nbuf API to net pkt API").
Update the assignments to use the new names.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
CONFIG_NET_TCP_{TIME_WAIT,2MSL_TIME} were replaced by
CONFIG_NET_TCP_TIME_WAIT_DELAY in commit 89f57c225a ("net:tcp: Define
single condig option for TIME_WAIT delay"), which also switched from
seconds to milliseconds for specifying the delay.
Remove the old assignments and set the new symbol to give the same
behavior as before.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
CONFIG_NET_RPL_MC_ETX was misspelled as "..._EXT".
CONFIG_NET_RPL_MC_{NONE,EXT,ENERGY} are choice symbols. Setting a choice
symbol to 'y' implies that none of the other choice symbols are
selected, so remove the 'n' assignments and keep just the
CONFIG_NET_RPL_MC_ENERGY=y assignment.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
CONFIG_IEEE802154_CC2520_AUTO_ACK started out as
CONFIG_TI_CC2520_AUTO_ACK, which was removed in commit 6b43821f20
("net: Remove legacy Contiki based uIP stack"). The assignments were
later renamed in commit 573774a9bf ("drivers/net/ieee802154: Change
configuration prefix").
Remove them.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The ADC_DEBUG Kconfig symbol was removed in commit a679f32920
("sys_log: replace old debug macros at ADC driver"), which introduced
SYS_LOG_ADC_LEVEL and switched to using SYS_LOG_DBG() for debug
messages.
Remove the ADC_DEBUG=y assignment and set SYS_LOG_ADC_LEVEL=4 so that
the debug messages still show up.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The generation of Stack Corruptions reports is, now, supported
in ARM SOCs with the ARM MPU (CONFIG_ARM_MPU). Therefore, this
commit removes the workaround for ARM architecture in
tests/kernel/fatal/ and keeps it only for SOCs with the NXP MPU
(CONFIG_MXU_MPU).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
No such generic UART symbols ever existed, afaict. Maybe some
board-specific UART was meant to be disabled.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
During the spi rework we removed the qmsi spi drivers so we no longer
have Kconfig symbols or drivers related to CONFIG_SPI_QMSI{_SS}. There
are a few references still around that we should remove
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
CONFIG_UART_NSIM depends on CONFIG_NSIM, which was removed in commit
9bc69a46fa ("boards: Update arc em_starterkit support from 2.2 to
2.3"). Remove the dependency, and also remove the CONFIG_NSIM=y setting
from the test_nsim test (which should now work).
Also change the condition for EXTERN()ing _VectorTable in
include/arch/arc/v2/linker.ld to check CONFIG_UART_NSIM instead of
CONFIG_NSIM. I'm guessing the EXTERN() is there to make the symbol
visible to nSIM, though I don't know anything about it.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
gdb_server was removed in commit 0f669132a0 ("kernel: remove
gdb_server"), but still has a testcase that sets CONFIG_GDB_SERVER=y,
and some code in arch/x86/debug.
Remove the leftover parts. This also gets gets rid of undefined
references to the CONFIG_GDB_SERVER symbol.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Zephyr code routinely assumes conventional ILP32/LP64 integer
behavior, and occasionally relies on it to perform some nice tricks.
This is despite the fact that this behavior (while pervasively adopted
and in use on all architectures we care about supporting) isn't
actually guaranteed by the language standard which allows much looser
semantics than actual exist on hardware.
Put it into the intmath section of this test as a build time thing.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Remove non-existent Kconfig symbol references. An additional (but
related) change is the removal of all persistent storage symbols from
the Arduino 101 Bluetooth shell app, since BT_STORAGE no longer
exists.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
These tests have an enormous stack which can be troublesome
to align on MPU-based systems; just disable user mode on
them.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
STACK_ALIGN has somewhat different semantics across our arches,
particularly ARC.
These checks are unnecessary, _new_thread() is required
to properly align stack sizes anyway.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The introduction of `sanitycheck --list-tests` fails to properly parse
the subcases in tests/subsys/fs/nffs_api/ beacause four of them are
all packed with #ifdefs in a single src/main.c.
So this breaks that testcase in four:
- creating a common folder with the code itself
- moving the common code in */src/main.c to common/test_nffs.h and
adding ../common/*.c to the sources
- thinning each testcase.yaml to have only the needed testcase
definition
- adding zephyr_include_directories(../common) to the cmakefiles
so we now produce with --list-tests
- filesystem.nffs.basic.append
- filesystem.nffs.basic.corrupt_block
- filesystem.nffs.basic.corrupt_scratch
- filesystem.nffs.basic.fs_mount
- filesystem.nffs.basic.gc
- filesystem.nffs.basic.gc_on_oom
- filesystem.nffs.basic.incomplete_block
- filesystem.nffs.basic.large_write
- filesystem.nffs.basic.long_filename
- filesystem.nffs.basic.lost_found
- filesystem.nffs.basic.many_children
- filesystem.nffs.basic.mkdir
- filesystem.nffs.basic.open
- filesystem.nffs.basic.overwrite_many
- filesystem.nffs.basic.overwrite_one
- filesystem.nffs.basic.overwrite_three
- filesystem.nffs.basic.overwrite_two
- filesystem.nffs.basic.read
- filesystem.nffs.basic.readdir
- filesystem.nffs.basic.rename
- filesystem.nffs.basic.split_file
- filesystem.nffs.basic.unlink
- filesystem.nffs.basic.wear_level
- filesystem.nffs.cache.cache_large_file
- filesystem.nffs.cache.fs_mount
- filesystem.nffs.large.fs_mount
- filesystem.nffs.large.large_system
- filesystem.nffs.large.large_unlink
- filesystem.nffs.performance.fs_mount
- filesystem.nffs.performance.performance
30 total.
vs before, that we did:
- filesystem.nffs.basic.append
- filesystem.nffs.basic.corrupt_block
- filesystem.nffs.basic.corrupt_scratch
- filesystem.nffs.basic.fs_mount
- filesystem.nffs.basic.gc
- filesystem.nffs.basic.gc_on_oom
- filesystem.nffs.basic.incomplete_block
- filesystem.nffs.basic.large_write
- filesystem.nffs.basic.long_filename
- filesystem.nffs.basic.lost_found
- filesystem.nffs.basic.many_children
- filesystem.nffs.basic.mkdir
- filesystem.nffs.basic.open
- filesystem.nffs.basic.overwrite_many
- filesystem.nffs.basic.overwrite_one
- filesystem.nffs.basic.overwrite_three
- filesystem.nffs.basic.overwrite_two
- filesystem.nffs.basic.read
- filesystem.nffs.basic.readdir
- filesystem.nffs.basic.rename
- filesystem.nffs.basic.split_file
- filesystem.nffs.basic.unlink
- filesystem.nffs.basic.wear_level
- filesystem.nffs.cache.append
- filesystem.nffs.cache.corrupt_block
- filesystem.nffs.cache.corrupt_scratch
- filesystem.nffs.cache.fs_mount
...
- filesystem.nffs.cache.split_file
- filesystem.nffs.cache.unlink
- filesystem.nffs.cache.wear_level
- filesystem.nffs.large.append
- filesystem.nffs.large.corrupt_block
- filesystem.nffs.large.corrupt_scratch
...
- filesystem.nffs.large.split_file
- filesystem.nffs.large.unlink
- filesystem.nffs.large.wear_level
- filesystem.nffs.performance.append
- filesystem.nffs.performance.corrupt_block
...
- filesystem.nffs.performance.unlink
- filesystem.nffs.performance.wear_level
92 total.
(so it was repeating ALL the subcases for eatch main testcase)
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
CONFIG_COMMAND_STACK_SIZE was removed in 4f798177cf ("kernel: remove
old micro/nanokernel C code"). Its help was "Microkernel server command
stack size (in packets)".
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
These were using the older name CONFIG_NET_NBUF_DATA_SIZE (note the
extra 'N'). The symbol was renamed in commit bf964cdd4c ("net:
Renaming net nbuf API to net pkt API").
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Many boards do not enable user mode in their default configuration
even though they support it. However for purposes of our unit
testing we really do want it on all the time.
It's not enough to just flip on CONFIG_USERSPACE, the tests largely
assume that CONFIG_APPLICATION_MEMORY and CONFIG_DYNAMIC_OBJECTS
are enabled. Update CONFIG_TEST_USERSPACE to be on by default if
CONFIG_TEST is active, and hang CONFIG_DYNAMIC_OBJECTS on it too.
This problem was not previously detected as qemu_x86 has the
user mode options in its defconfig and it is currently the only
user mode compatible platform which runs in emulation.
Fixes#7692
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is a workaround until #7704 is fixed, we are getting
an assembler error due to the r7 clobber in the syscall
invocation macros.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
An errant commit accidentally disabled all testing of
hardware-based stack protection. Restore it, and work
around a problem with how these kinds of exceptions are
reported on ARM until #7706 is fixed.
We need to globally disable user mode due to how the
select statements in Kconfig work, the stack sentinel
is incompatible with user mode.
Some build warnings when compiling as native_posix
fixed.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We run into the limit of 32 object files on ARM when
CONFIG_APPLICATION_MEMORY is enabled.
Bug #7703 filed, meanwhile just disable it, it's not
needed for this test case.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
A test was trying to add the maximum number of partitions,
but when the domain was initialized there was already one
added which needed to be accounted for to avoid an
assertion failing.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The Kconfig option TOOLCHAIN_VARIANT (not to be confused with
ZEPHYR_TOOLCHAIN_VARIANT) is a legacy configuration option that has
very few use-cases and can easily be dropped.
It's functionality is easily covered by CONFIG_X86_IAMCU and
ZEPHYR_TOOLCHAIN_VARIANT.
This commit removes all references of it from Zephyr.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The code was using MSEC() macro in few places instead of more
proper K_MSEC(). The MSEC() takes seconds as a parameter and
K_MSEC() takes milliseconds.
Fixes#7657
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add description to test cases in tests/kernel/mem_heap,
tests/kernel/mem_slab and tests/kernel/mem_pool
Signed-off-by: Spoorthi K <spoorthi.k@intel.com>
These tests had very small stacks, and the rbtree scheduler on
qemu_x86 (which does need a little extra stack room, though not much)
is bumping up against the limit. Increase by ~128 bytes in most
cases. In the case of the mbox_api test, there are other platforms
(which don't use the tree) which are right against the limit already
and will fail to link with a larger stack, so bump it for qemu_x86
only.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The scheduler priq implementation was taking advantage of a subtle
behavior of the way the tree presents the order of its arguments (the
node being inserted is always first). But it turns out the tree got
that wrong in one spot.
As this was subtle voodoo to begin with, it should have been
documented first. Similarly add a little code to the test case to
guarantee this in the future.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Minimal driver for ILI9340 LCD display driver including support
for adafruit 2.2" LCD display (1480)
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
Remove unstructured and unused doxygen groups for tests. We will now add
doxygen comments per test function and follow a more structured
grouping.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
k_poll is now accessible from user mode. A memory allocation takes place
from the caller's resource pool to copy the provided poll_events
array; this can be large enough to make allocating it on the stack
not preferable.
k_poll_signal are now proper kernel objects. Two APIs have been added,
one to reset the signaled state and one to check the current signaled
state and result value.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
User mode may now use queue objects. Instead of embedding the kernel's
linked list information directly in the data item, a container struct
is allocated from the caller's resource pool which is then added to
the queue. The new sflist type is now used to store a flag indicating
whether a data item needs to be freed when removed from the queue.
FIFO/LIFOs are derived from k_queues and have had allocator functions
added.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
For baffling reasons, the ARC objdump is crashing when
creating the disassembly for the power/multicore/arc
test.
It is known that the patch for adding user mode support
to k_queue objects introduces this issue, but why objdump
crashes is yet unknown.
The compiler problem is tracked in #7608
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Replaces platform whitelists with "depends_on: watchdog" to make the
watchdog test build for all supported platforms. Also updates the
testcase name to follow the new <component>.<subcomponent>
classification scheme.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Makes the dual timeout test conditional upon the nrfx watchdog driver
because not all watchdogs can support multiple timeouts.
Test now passes on frdm_k64f, hexiwear_k64, and usb_kw24d512 boards.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This patch adjusts some of the timeouts for the RTC sample test. The
NXP RTC varies a little bit from the QMSI due to the way the timer
count and alarm count work. The NXP will trigger an alarm when the
timer count and alarm count are the same, but only when it increments
to the next value.
If you set the alarm to be 1 second past the current time, it may take
up to 2 seconds. Setting the alarm equal to the current time will
result in an alarm occurring in less than 1 elapsed second.
Signed-off-by: Andy Gross <agross@kernel.org>
This patch adds a prescaler configuration option that denotes the
number of RTC ticks per second. This is used to calculate the value
for 1 second.
Signed-off-by: Andy Gross <agross@kernel.org>
Works mostly like the list enumeration macros. Implemented by fairly
clever alloca trickery and some subtle "next node" logic. More
convenient for many uses, can be early-exited, but has somewhat larger
code size than rb_walk().
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Similar to what has been done with pipes and message queues,
user mode can't be trusted to provide a buffer for the kernel
to use. Remove k_stack_init() as a syscall and offer
k_stack_alloc_init() which allocates a buffer from the caller's
resource pool.
Fixes#7285
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
User mode can't be trusted to provide a memory buffer to
k_msgq_init(). Introduce k_msgq_alloc_init() which allocates
the buffer out of the calling thread's resource pool and expose
that as a system call instead.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
User mode can't be trusted to provide the kernel buffers for
internal use. The syscall for k_pipe_init() has been removed
in favor of a new API to draw the buffer memory from the
calling thread's resource pool.
K_PIPE_DEFINE() now properly locates the allocated buffer into
kernel memory.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Dynamic kernel objects no longer is hard-coded to use the kernel
heap. Instead, objects will now be drawn from the calling thread's
resource pool.
Since we now have a reference counting mechanism, if an object
loses all its references and it was dynamically allocated, it will
be automatically freed.
A parallel dlist is added for efficient iteration over the set of
all dynamic objects, allowing deletion during iteration.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Forthcoming patches will dual-purpose an object's permission
bitfield as also reference tracking for kernel objects, used to
handle automatic freeing of resources.
We do not want to allow user thread A to revoke thread B's access
to some object O if B is in the middle of an API call using O.
However we do want to allow threads to revoke their own access to
an object, so introduce a new API and syscall for that.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
If a variable is declared extern first, the name and type
information is stored in a special DW_DIE_variable which
is then referenced by the actual instances via the
tag DW_AT_specification.
We now place extern variable instances in an extern environment
and use this data to fetch the name/type of the instances,
which do not have it (which is why they were being skipped).
As it turns out, the gross hack for the system workqueue was
due to this problem because of the extern declaration in
kernel.h.
Fixes: #6992
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The test checked if the change was reported as successful and it always
was. What needs to be done is comparing whether the mac address was
actually changed to the requested one.
This commit adds this check.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Similar to UDP, some drivers can make use of the following functions:
net_tcp_get_hdr()
net_tcp_set_hdr()
Let's expose them as <net/tcp.h> and change all internal references
to "tcp_internal.h".
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Ensure that sanitycheck runs this sample only on boards with
right drivers support. This test was picking all targets and
executing on each of them .This eliminates incorrect builds.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
The qemu doesn't have any flash drivers present in the
drivers/flash folder.
When building the tests/subsys/fs/nffs_fs_api the qemu picks
up a local file to emulate the drivers. This setup was causing the
failures in mapping required dependencies. This patch creates a
new kconfig which can be used to test out the flash drivers.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Add a test case for k_thread_foreach API.
Replace deprecated k_call_stacks_analyze API with
k_thread_foreach for existing test cases.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
This ensures the every characteristic has a value attribute declared
with the same UUID since the old macro did not declare the value the
application would normally have to declare one itself using a different
UUID which is not allowed.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
New test checks watchdog API if the simpliest test cases work
correctly. Each test contains description at the begining of the
source file.
This implementation replace old SoC-centric implementation.
Signed-off-by: Karol Lasończyk <karol.lasonczyk@nordicsemi.no>
As this test uses dummy L2 driver, there is no need for ethernet
specific setup as that is not used for anything.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When creating IPv4 packet, the IPv4 header contained uninitialized
values. This was reported by valgrind.
Conditional jump or move depends on uninitialised value(s)
at 0x8066AB0: calc_chksum (utils.c:386)
by 0x8066C99: calc_chksum_pkt (utils.c:428)
by 0x806710A: net_calc_chksum (utils.c:487)
by 0x8067B8D: net_calc_chksum_icmpv4 (net_private.h:138)
by 0x8067FEC: net_icmpv4_set_chksum (icmpv4.c:90)
by 0x8068E7A: net_icmpv4_send_error (icmpv4.c:338)
by 0x807272F: send_icmp_error (connection.c:773)
by 0x80731A3: net_conn_input (connection.c:992)
by 0x806A34D: net_ipv4_process_pkt (ipv4.c:212)
by 0x805D8B9: process_data (net_core.c:103)
by 0x805D939: processing_data (net_core.c:117)
by 0x805E498: net_rx (net_core.c:300)
Uninitialised value was created by a stack allocation
at 0x804A437: setup_ipv4_tcp (main.c:297)
Conditional jump or move depends on uninitialised value(s)
at 0x8067117: net_calc_chksum (utils.c:489)
by 0x8067B8D: net_calc_chksum_icmpv4 (net_private.h:138)
by 0x8067FEC: net_icmpv4_set_chksum (icmpv4.c:90)
by 0x8068E7A: net_icmpv4_send_error (icmpv4.c:338)
by 0x807272F: send_icmp_error (connection.c:773)
by 0x80731A3: net_conn_input (connection.c:992)
by 0x806A34D: net_ipv4_process_pkt (ipv4.c:212)
by 0x805D8B9: process_data (net_core.c:103)
by 0x805D939: processing_data (net_core.c:117)
by 0x805E498: net_rx (net_core.c:300)
by 0x805E51D: process_rx_packet (net_core.c:312)
by 0x8085E87: work_q_main (work_q.c:39)
Uninitialised value was created by a stack allocation
at 0x804A437: setup_ipv4_tcp (main.c:297)
Fixes#7447
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The options array was not initialized to 0 and the size of the
array was not set properly. This caused following error in valgrind
Conditional jump or move depends on uninitialised value(s)
at 0x8056777: coap_find_options (coap.c:1096)
by 0x804AEFF: test_parse_simple_pdu (main.c:455)
by 0x80500E6: zephyr_app_main (main.c:1585)
by 0x807E231: bg_thread_main (init.c:254)
by 0x80842D7: _thread_entry (thread.c:201)
by 0x8059618: posix_thread_starter (posix_core.c:301)
by 0x40752C8: start_thread (in /usr/lib/libpthread-2.25.so)
by 0x4182055: clone (in /usr/lib/libc-2.25.so)
Fixes#7447
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This will lead invalid IPv6 address to be generated. This was seen
in valgrind.
Conditional jump or move depends on uninitialised value(s)
at 0x40371A4: bcmp (vg_replace_strmem.c:1100)
by 0x8058833: net_ipv6_addr_cmp (net_ip.h:542)
by 0x805B999: ipv6_addr_find (net_if.c:768)
by 0x805BC8C: net_if_ipv6_addr_add (net_if.c:846)
by 0x804A7D7: _iface_ip6_add (mgmt.c:271)
by 0x804A5DC: test_core_event (mgmt.c:251)
by 0x804AD1D: test_mgmt (mgmt.c:320)
by 0x807EA81: run_test_functions (ztest.c:56)
by 0x807EC3C: test_cb (ztest.c:196)
by 0x8085AFD: _thread_entry (thread.c:201)
by 0x8051B43: posix_thread_starter (posix_core.c:301)
by 0x40752C8: start_thread (in /usr/lib/libpthread-2.25.so)
Fixes#7447
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This patch fixes a coverity issue with the post increment of ni inside
an zassert call. There might be side effects of non-debug builds that
would cause the code to not do the right thing.
Coverity-ID: 185391
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch fixes a coverity issue with checking the outcome of a call
to net_if_config_ipv6_get().
Coverity-ID: 183478
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch fixes a couple of coverity issues pertaining to
uninitialized members of a sigevent structure.
Coverity-ID: 183070
Coverity-ID: 185276
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch fixes a coverity issue with dereferencing a null ptr. The
test needs to make sure there is a valid udp hdr before inspecting the
contents.
Coverity-ID: 183484
Coverity-ID: 183480
Signed-off-by: Andy Gross <andy.gross@linaro.org>
The sequence number was acting as a stop-gap for missing persistent
storage. Now that we have the settings support in place it's no longer
needed.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Keeping the model struct same sized, change the element pointer to two
indexes, and add a flags member that will be used to track pending
storage actions.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
New test for check whether deleted item is not copied to the newest
fcb sector during compression procedure.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Add few tests to check access permissions of memory partitions
of a memory domain, validate memory domain destroy.
Signed-off-by: Spoorthi K <spoorthi.k@intel.com>
Most calls to ztest_assert() contain a message with no trailing
newline. So when it fails, we get (eg:):
starting test - test_multilib
Assertion failed at multilib.c:19: test_multilib: (c not equal to 323)
smoke-test failed: wrong multilib selectedFAIL - test_multilib.
when we'd like to get:
smoke-test failed: wrong multilib selected
FAIL - test_multilib.
among other things, because it is easier to parse for correctness.
So this patch adds a trailing newline to the message instead of going
around trying to police every call site to do it.
print[kf]() is used vs k_str_out() as we need something that is
available also for unit tests. As this is not in any hot path,
performance wise is not such a big deal.
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Group tests under 'Zephyr Tests' and only document the actual tests.
Create cross references to APIs being tested where applicable.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Set FAT FS mount point name as per ELM FAT Library drive
name format.
Add file system specific headers wherever necessary.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Also parse test documentation. When add tests to doxygen, we get
warnings about device.h macros not being defined. Exclude this now and
track this in issue #7367.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
For many tests, avoid splitting into files and put eveything in main.c.
For many of the tests, use main.c as the test source file to keep things
consistent.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Enable settings and increase the system workqueue size to deal with
the stack usage. This also makes it possible to test unpairing support
with the shell's 'clear' command.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The same functionality is now supported by the settings-based
solution, so remove bt_storage out of the way. There were stubs in
bt_storage to handle per-peer information (e.g. pairing keys) but this
was never actually implemented in full. The next step is to add this
support to the settings-based solution.
Leave the code for generating temporary IRK and identity address in
case BT_SETTINGS is not enabled. Also leave the code for using vendor
HCI to read the identity address, in which case the settings
implementation will not touch it.
Introduce a new bt_unpair() API to replace the removed
bt_storage_clear(), since the latter was actually doing more than just
storage management: it was also handling runtime storage of pairing
information. Later, the bt_unpair() implementation will be extended to
clear settings-based pairing storage.
There is one feature that the bt shell module looses: the ability to
give a specific identity address to the "init" command as a parameter.
We might look later in the future if this is really needed, and add a
separate API for this.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The fp_sharing test has an option to control the number of iterations in
the pi calculation, which is used to adjust the duration of the test on
different platforms that may have significantly different execution
frequencies (e.g., qemu_x86 vs. frdm_k64f). The conversion to CMake did
not handle this option correctly and forced the same value for all
platforms.
The test now completes in about 5 minutes on frdm_k64f.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Add test for Altera Nios-II MSGDMA soft IP core. This IP on
Altera MAX10 support Memory to Memory DMA transfers.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Add new test for testing IPv4 source address selection functions.
Refactor the tests:
- split tests to smaller pieces
- use proper zassert() statements
- print debugging information only when needed
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add hardware dependencies and filters to make sure we do not explode if
for example we try to build a sample/test using rtc when the platform
does not support that.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add support to enable test application selectively based
on defconfig
Change-Id: I8111750ff099edd95ffa22c6e312999c801678ea
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
patch add a hid test application which sends continues
reports to the host
Change-Id: I3a638caded629b502b4cfc6c7bdcba0b67428350
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Enable the CAVS I2S on intel_s1000. Also, introduce a test to
validate I2S in ping-pong and normal modes.
Change-Id: Iea78e22cedc7724c1c2e821c68d7030cc0a65047
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Enable the CAVS DMA on intel_s1000. Also, introduce a test to
validate the DMA.
Change-Id: I2ff233c45cfd8aea55e254d905350a666aa649a0
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This patchset carries out basic tests on the features supported
on intel_s1000. Currently, Interrupt mechanism, GPIO handling, I2C
communication and UART prints are illustrated.
Change-Id: I7ea03b5085b7fa8d29635c294038536465a70660
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
As k_thread_cancel() is deprecated, we need to test if delayed thread
which is in wait queue can be cancelled from k_thread_abort().
Signed-off-by: Spoorthi K <spoorthi.k@intel.com>
Added test for initialization with FCB backend.
This test should goes over reset so it test blank and
subsequent initialization and data restoring capability
after the reset.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
The NFFS partition at the end of flash is also useful for any other
file system or even the Flash Circular Buffer (FCB). Rename the
partition from 'nffs_partition' to 'storage_partition' and make it
depend on a new hidden Kconfig entry which the relevant users will
select (such as NFFS and FCB).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The testcases presented here will test the following functionality
1. Inheritance of permission from parent thread to child.
2. Memory domain implementation.
3. Access permission for k objects.
The combinations of these test cases will cover some of the basic
usecases of the userspace mode.
These test cases are meant to be executed by any board with has
CONFIG_USERSPACE enabled.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Adding a new kernel object type or driver subsystem requires changes
in various different places. This patch makes it easier to create
those devices by generating as much as possible in compile time.
No behavior change.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
API settings_subsys_init call was changed so that it returns
error (so returns int instead of void).
Prototype of storage helper function export_func for
settings_handler::h_export was changed so that it returns error
(so returns int instead of void).
Fixed few other error handling issues by ignoring return
values.
Tests were aligned to above patches.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Instead of completely excluding those tests, mark them as skipped and
provide an noop function that marks the test as skipped where test is
not supported.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Some tests cant run everywhere, instead of completely dropping them, we
should report them as being skipped.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Minor change to make test names consistent with other tests using ztest.
All test functions need to start with test_.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Close test sockets in test_send_recv_2_sock() to avoid Coverity
warnings.
Coverity-Id: 182764
Fixes: #6107
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
A red-black tree is maintained containing the metadata for all
dynamically created kernel objects, which are allocated out of the
system heap.
Currently, k_object_alloc() and k_object_free() are supervisor-only.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The only difference between this call and k_thread_abort() (beyond
some minor performance deltas) is that "cancel" will act as a noop in
cases where the thread has begun execution and will return an error.
"Abort" always succeeds, of course. That is inherently racy when used
as a "stop the thread" API: there's no way in general (or at all in
SMP situations) to know that you're calling this function "early
enough" to catch the thread before it starts.
Effectively, all k_thread_cancel() gives you that k_thread_abort()
doesn't is an indication about whether or not a thread has started.
There are many other ways to get that information that don't require
dangerous kernel APIs.
Deprecate this function. Zephyr's own code never used it except for
its own unit test.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Add zassert's to check results of intermediate operations like
socket/bind/connect. Also, use symbolic expressions instead of
constants like 4 (for data length).
Coverity-Id: 182765, 182767
Fixes: #6104, #6106
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Following tests were failing on a microcontroller with 32KB flash:
test-mbedtls
kernel.common
The min_flash option has been added in the test case yaml files.
Signed-off-by: Diego Sueiro <diego.sueiro@gmail.com>
In Zephyr this has no effect because getaddrinfo() returns a pointer
to a static array, but Coverity scan checks for this pattern.
Coverity-CID: 185273
Coverity-CID: 185279
Fixes#7085Fixes#7091
Signed-off-by: Stig Bjørlykke <stig.bjorlykke@nordicsemi.no>
Previously, some fields like sin6_scope_id weren't explicitly
initialized. Such aren't really used, but to keep Coverity
happy, let's zero out the entire address structure.
Coverity-Id: 182763
Fixes: #6108
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Min RAM requirement for tests/net/utils was 16K,
hence run on nucleo_l073rz.
Though, build size is a little more than 20K which
overflows board RAM.
Increase min RAM requirement for this test to 24K
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This will prevent building these tests for boards not supposed to run
a TCP/IP stack, particularly 96b_carbon_nrf51 where test-with-dns
would not fit into 32 kB of RAM.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This adds a translation layer to make the nrfx driver for the nRF SPIM
(SPI Master with EasyDMA) peripheral accessible via the Zephyr's API.
The shim is provided only for nRF52840 because of a hardware anomaly
present in nRF52832. See Anomaly 58 (SPIM: An additional byte is clocked
out when RXD.MAXCNT = 1) in Errata for this chip.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Drivers will be directly contacted via net_if's offload attribute. No
need for a an extra layer as an L2.
Signed-off-by: Dario Pennisi <dario@iptronix.com>
Signed-off-by: Massimiliano Agneni <massimiliano.agneni@iptronix.com>
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
1. Add a tag in the testcase.yaml to deal with the following error from
sanitycheck:
E: tests/lib/rbtree/testcase.yaml: can't load (skipping):
<NotMappingError: error code 6: Value: None is not of a
mapping type: Path: '/'>
2. Reduced the MAX_NODES so the test will build on small memory systems
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Returns true if the specified node is in the tree. Allows the tree to
be used for "set" style semantics along with a lessthan_fn that simply
compares the nodes by their address.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Test for the rbtree balanced tree.
The theory here is that the test uses a PRNG to randomly build and
modify trees build from an array of node objects (whose comparison
operator is just their memory address). It begins with tiny node
sets, so as to catch edge cases (e.g. nodes being the root, or a leaf,
or parent/child) in the balancing algorithm before increasing the size
and continuing.
At each iteration the resulting tree is walked, verifying that it
contains exactly the nodes that we expect it should, that they appear
in the correct sorted order in the walk, that their local structure
matches a correct binary tree, and that the red/black rules are
followed always:
* The root must be black
* Red nodes can have only black children
* The path from the root to any NULL child pointer in the tree must
cross the same number of black nodes.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Following tests were failing on a microcontroller with 32KB flash:
benchmark.application
crypto.ecc_dh
crypto.ecc_dsa
test_build_ethernet
test_build_sensors_a_m
The min_flash option has been added in the test case yaml files.
Signed-off-by: Diego Sueiro <diego.sueiro@gmail.com>
The test actually has three network interfaces in native_posix board
and not two so check that correctly.
Fixes#6988
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Curently only link speed is exposed.
Opportunity taken to remove any post-fix enumerating the iface init
and/or the api: these must be generic and used by all the instances.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The test case checks that many of the common header files are C++
compatible and checks that some of the primitives like ARRAY_SIZE
work.
Signed-off-by: Michael Hope <mlhx@google.com>
Because we now return first non VLAN interface if found, the
VLAN disable test case needs adjustment.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit disables Bluetooth and adds a customized vector
table for nRF52X-based platforms in the irq_vector_table kernel
test, in order to prevent UsageFault during system timer
interrupts, and, therefore, let the test execute properly.
This commit fixes#6890.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add Cortex-M33 and Cortex-M7 in the list of supported
ARM MCUs for the arm_irq_vector_table test.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add tests to verify the bit manipulation functions in net/vlan.h
file. Also check that we can check if given network interface has
VLAN enabled or not. Verify also that received network packet
contains correct VLAN tag.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This allows creation of virtual lan (VLAN) networks. VLAN support is
only available for ethernet network technology.
Fixes#3234
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Some of the sanitycheck tests were having too small limit for
network buffers when compiling for sam_e70_xplained board.
Increase the buffer limits when testing this for this board.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This adds to the spi_loopback test board-specific configurations
for the following boards:
- nrf51_pca10028
- nrf52_pca10040
- nrf52840_pca10056
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
It was much more limited than the spi_loopback test, and of course using
the legacy API. Removing it then.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Instead of using CONFIG_POLL, which is not directly related to SPI and
is a kernel option, let's have SPI_ASYNC instead. When enabled, it will
select POLL automatically.
Fixes#5839
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
tx_bufs/tx_count and rx_bufs/rx_count can be hold in another dedicated
structure, thus reducing the number of parameters to transceive. This
permits to avoid using the stack when calling transceive.
Since we saved parameters, we can expose back the struct device pointer,
to stay consistent with other device driver APIs.
Fixes#5839
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Added posix_checks, which checks supported priorities,
clocks and timer APIs, mainly in the point of negative
tests to increase code coverage.
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
In some cases pthread attrib initialization may fail as
garbare value may indicate that this attribute is already
initialized. Destroy the attr object and recreate it.
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
For posix layer implementation of message queue, we need to fetch
basic attributes of message queue. Currently this routine is not
present in Zephyr. So adding this routing into message queue.
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
When dns_get_addr_info() returns an error it does not call the
resolve callback, and thus the semaphore will not be given.
This fix will avoid a deadlock situation for various errors.
Added some small tests for getaddrinfo().
Signed-off-by: Stig Bjørlykke <stig.bjorlykke@nordicsemi.no>
There is a typo in the area description of the testcase (kerne.XYZ vs
kernel.XYZ).
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Enable the loopback driver and set up network testing so that it
will not require a SLIP driver. Move values from the extra test
config so that they are always enabled.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Adapt the MyNewt non-volatile configuration system to become a settings
system in Zephyr.
The original code was modifed in the following ways:
* Renamed from config to settings
* Use the zephyr FCB, FS API, and base64 subsystems
* lltoa like function was added to sources as it was required but not
included in Zephyr itself.
* The original code was modified to use Zephyr's slist.h as single
linked list implementation.
* Reworked code which was using strtok_r, added function
for decoding a string to a s64_t value.
* Thank to the above the settings subsys doesn't require newlibc anymore.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This demostrates how to classify the network traffic when sending
data. The application will create similar functionality as
echo-client so user can use echo-server running in remote host to
test this sample application.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Test that we can set the priority of the network packet and
that high priority packets are sent before low priority ones.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of always allocating both IPv6 and IPv4 address information
to every network interface, allow more fine grained address
configuration. So it is possible to have IPv6 or IPv4 only network
interfaces.
This commit introduces two new config options:
CONFIG_NET_IF_MAX_IPV4_COUNT and CONFIG_NET_IF_MAX_IPV6_COUNT
which tell how many IP address information structs are allocated
statically. At runtime when network interface is setup, it is then
possible to attach this IP address info struct to a specific
network interface. This can save considerable amount of memory
as the IP address information struct can be quite large (depends
on how many IP addresses user configures in the system).
Note that the value of CONFIG_NET_IF_MAX_IPV4_COUNT and
CONFIG_NET_IF_MAX_IPV6_COUNT should reflect the estimated number of
network interfaces in the system. So if if CONFIG_NET_IF_MAX_IPV6_COUNT
is set to 1 and there are two network interfaces that need IPv6
addresses, then the system will not be able to setup IPv6 addresses to
the second network interface in this case. This scenario might be
just fine if the second network interface is IPv4 only. The net_if.c
will print a warning during startup if mismatch about the counts and
the actual number of network interface is detected.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Move IP address settings from net_if to separate structs.
This is needed for VLAN support.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove arduino_101 from platform whitelist in testcase.yaml as all the
test cases are not meant to run on Arduino_101.
Signed-off-by: Spoorthi K <spoorthi.k@intel.com>
As per the Apache v2 License, state changes made to the original code in
the modified version of the files.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The following test cases have been added for semaphore.
1. Test simple semaphore give/take from an isr.
2. Test simple semaphore give/take from a task.
3. Test semaphore take with no wait.
4. Test semaphore take with no wait and fails.
5. Test semaphore take with timeout and fails.
6. Test semaphore take with timeout.
7. Test semaphore take with timeout as forever
8. Test semaphore take with timeout from an isr.
9. Test semaphore take on multiple threads.
10. Test semaphore give/take from an isr.
11. Test semaphore multiple threads wait on a semaphore.
12. Test semaphore measure timeouts.
13. Test semaphore measure timeout when give is from another thread.
14. Test semaphore multiple sem take and timeouts.
15. Test semaphore multiple sem take with diff timeout & semaphore.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
This test validates random number generator APIs that
is not related to kernel and should not be part of
kernel tests.
Signed-off-by: Praful Swarnakar <praful.swarnakar@intel.com>
Test that if the checksum offloading is enabled, then we do not
calculate the checksum. Also the normal case, where offloading is
disabled and we need to calculate the checksum, is tested.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Create infrastructure that allows ethernet device driver to tell
if it supports network packet checksum offloading. This applies only
to IPv4, UDP or TCP checksums. The driver can enable/disable checksum
offloading separately for Tx and Rx network packets.
If the device (ethernet in this case) can calculate the network
packet checksum for IPv4, UDP or TCP, then do not calculate the
corresponding checksum by the stack itself.
Fixes#2987
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The test validates the behavior of calling k_thread_start()
of thread which is already started. The thread has to start
execution only when its state is _THREAD_PRESTART.
Signed-off-by: Spoorthi K <spoorthi.k@intel.com>
Added a test for having UTF-8 characters in Kconfig values. This
ensures that issue
https://github.com/zephyrproject-rtos/zephyr/issues/6649 does not
affect any supported platforms and that it does not re-appear in the
future.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Previous implementation was buggy, destroying
resources with pending thread and race conditions.
New version tests basic functionality with 2
threads and basic synchronization.
Signed-off-by: Juan Manuel Torres Palma <j.m.torrespalma@gmail.com>
Add testcases for following scenario
Test to check alert_recv(timeout) against the following cases
1. The current task times out while waiting for the event.
2. There is already an event waiting (signalled from a task).
3. The current task must wait on the event until it is signalled
from either another task or an ISR
Test to check alert_recv(K_FOREVER) against the following cases:
1. There is already an event waiting (signalled from a task and ISR).
2. The current task must wait on the event until it is signalled
from either another task or an ISR
Test to checks that the event handler is set up properly when
alert_event_handler_set() is called. It shows that event handlers
are tied to the specified event and that the return value from the
handler affects whether the event wakes a task waiting upon that
event
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
With upcoming ICs that are not in the nRF5x family, rename the flash
driver and all its dependencies from nrf5 to nrf.
Should also fix the issue introduced by f49150cab6 which broke the
assignment of the flash device due to a partial rename.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add k_fifo kernel object timeout scenario tests like basic
k_fifo API tests with timeouts and tests which involve other
threads to get/put items from/into k_fifo with timeouts.
This test is inspired from test_stack legacy test from
Zephyr v1.7.0 release.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Add k_fifo kernel object usage scenario tests between thread
to thread and thread to ISR.
This test is inspired from test_fifo legacy test from
Zephyr v1.7.0 release.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Network packet cannot be NULL so no need to check its value.
Coverity-CID: 183063
Fixes#6669
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
No need to verify that the configuration is proper if we are
compiling the driver for unit test and not going to ever run
the test.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add support for MSG_PEEK flag in recv and recvfrom.
This flag is needed when using non-zephyr embedded applications with
Zephyr's socket API.
Signed-off-by: Stig Bjørlykke <stig.bjorlykke@nordicsemi.no>
Upcoming Nordic ICs that share many of the peripherals and architecture
with the currently supported nRF5x ones are no longer part of the nRF5
family. In order to accomodate that, rename the SoC family from nrf5 to
nrf, so that it can contain all of the members of the wider Nordic
family.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Previously qemu_x86 was the only device to run this test in
userspace. With this patch, the pipe testcases can now
run on any device which has userspace enabed.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
The following are the test cases added for pipe.
1. Test pipe APIs on single data element.
2. Test pipe APIs on multiple data elements.
3. Test pipe APIs with forever wait.
4. Test pipe APIs with timeout.
5. Test pipe APIs on an empty pipe.
6. Test pipe get API with forever timeout.
7. Test pipe get API with limited timeout.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
A new Kconfig to help test the userspace mode. Needed for devices
which have userspace capabilities but are not enabled by default.
This kconfig enables the userspace for the devices which have
CONFIG_ARCH_HAS_USERSPACE enabled.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
The test verifies the API functionality of _thread_essential_clear(),
_thread_essential_set() and _is_thread_essential()
Signed-off-by: Spoorthi K <spoorthi.k@intel.com>
This is a component of address space layout randomization that we can
implement even though we have a physical address space.
Support for upward-growing stacks omitted for now, it's not done
currently on any of our current or planned architectures.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
With recent master, this sample started to overflow ROM area of
arduino_101, which has 144K of it:
Memory region Used Size Region Size %age Used
ROM: 149420 B 144 KB 101.33%
RAM: 26228 B 52 KB 49.26%
IDT_LIST: 564 B 2 KB 27.54%
MMU_LIST: 0 GB 1 KB 0.00%
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
SRAM size is very small and so we cant fit the test-suite inside.
Hence disabling the execution on boards with very small RAM region.
Example: quark_d2000 & nucleo f030
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Added new test cases to increase the impact of the test cases.
The following are the brief description of the testcases:
1. Incorrect receiver address.
2. Incorrect transmit address.
3. Mbox_get timeout occurs when not able to retrive a msg.
4. Discard a msg by passing an invalid pool id.
5. Msg id mismatch between the receiver and transmitter.
6. Copy tx buffer to a new block in the pool.
7. Copy a big tx buffer to a block in the pool but no block
can fit it.
8. Dispose a msg as soon as it is read.
9. Free tx pool when we read the msg.
10. A Asynchronous put unblocks a waiting get.
11. A Asynchronous put sends a wrong address to a waiting get.
12. Multiple Asynchronous put populates the msg_q and mbox_get
retrives it.
13. Multiple waiting mbox_get and each put unblocks it one at a time.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Modified the testcase for comparing the successive random
numbers generated by sys_rand32_get(). Also, added new configs
for verifying different sources of random number generation.
Signed-off-by: Praful Swarnakar <praful.swarnakar@intel.com>
We don't currently build on qemu_xtensa because completion is missing.
Seems like we have some dependency issue.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This tests websocket by creating a websocket support http server
and sending data to it and verifying the returned data is the same.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
A new build test for gpio drivers is added to build_all testcase.yaml.
The gpio_sx1509 driver is enabled in the .conf file and dts.fixup macros
are added for the driver.
Signed-off-by: Aapo Vienamo <aapo.vienamo@iki.fi>
The ICSR[NMIPENDSET] bit got renamed to ICSR[PENDNMISET] in the v8m
architecture. So we map SCB_ICSR_PENDNMISET_Msk to
SCB_ICSR_NMIPENDSET_Msk to the tests builds and functions.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add a testcase where single work is submitted to
multiple queue. In this case handler invoked only
once as single work cannot be submitted to multiple
queue.
Add a test case which submit a work to a queue twice. This testcase
is added to test neagtive case when k_delayed_work_cancel() fails
in k_delayed_work_submit_to_queue API
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
Add a new test for testing multiple file systems mounted
simultaneously on Zephyr. The test enables FATFS and NFFS
togeather and uses RAM as backend storage device.
The intention of this test is to demonstrate multiple file systems
support and perform basic file and directory operations. This test
heavily reused the existing fat_fs_api and nffs_fs_api test sources.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Adapt nffs_fs_api test as per the VFS layer changes.
Add new test for NFFS file system mount.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Adapt fat_fs_api test as per the VFS layer changes.
Add new test for FatFs file system mount.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Added a test to check for the predictability with which
the timer expires depending on the period configured.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
The SAM0 SoC was switched to use DTS for SPI configuration. Adapt the
spi_loopback test configuration for the Arduino Zero to use the
correct device name.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Add stack object usage scenario tests between thread
to thread and thread to ISR.
This test is inspired from test_stack legacy test from
Zephyr v1.7.0 release.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
This adds Enable advertising with Node Identity BTP command and
it's implementation.
This command is needed to pass PTS MESH/NODE/CFG/NID/BV-02-C
test case.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This command has been agreed and implemented in tester application.
The patch updates BTP document only.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Rename variable zpkt to cpkt to complete the move from ZoAP to CoAP.
Remove unused tests/net/lib/zoap/CMakeLists.txt file.
Signed-off-by: Stig Bjørlykke <stig.bjorlykke@nordicsemi.no>
Test of f. flash_area_get_sectors was failing because parameter for
passing capacity of the sectors array was uninitialized.
This patch fix this bug.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
The root cause for this issue was found in
https://github.com/zephyrproject-rtos/zephyr/issues/6470
so this kconfig isn't needed anymore.
This is a partial reversion of 6eef2f14. The actual feature is left
in place, as it's plausibly useful in other contexts (otherwise
assertions enabled by sanitycheck can't be disabled by the app as
they're passed in via CFLAGS).
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The kernel.fatal.stack_protection was filtering on
ARCH_HAS_STACK_PROTECTION and that should be
CONFIG_ARCH_HAS_STACK_PROTECTION
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add a test to verify that k_sleep() can be used to put
the calling thread to sleep for a specified number of
ticks during system initialization.
This test is inspired from legacy test_early_sleep test
from v1.7.0 release.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
This test is POSIX based implementation of tests:kernel:pthread test.
It used POSIX APIs instead of Zephyr APIs.
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
Get the reporting right and consistent with other tests. Use ztest
possible where possible and remove too many lines and confusing output.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move to a more cosnistent test naming using test_ to improve reporting
and parsing. Expand string tests and run them as separate ztest tests.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The mbedtls test is hitting a compiler bug where two subtests will
soft fail on qemu_xtensa when assertions are enabled. This is despite
the fact that:
+ The failure is entirely internal to the mbedtls suite.
+ The mbedtls code does not use zephyr asserts
+ The mbedtls code does not call into zephyr code that might assert.
+ The behavior persists even when an irq_lock() is held across the
entire test, ruling out any asserts in interrupt/exception context.
+ And EVEN WHEN the mbedtls library blobs are bytewise identical
between assert and non-assert cases.
The bug seems to be a layout thing where the mbedtls code behavior
differently based on code address and/or link-time optimizations
(xtensa has a few).
Unfortunately sanitycheck enables assertions by setting CFLAGS
directly and not via kconfig, so we can't fix this by turning the
feature off in an app right now. This patch adds a simple "override"
flag that can be set by apps like this that hit bugs.
Again, note that zephyr assertions are not used nor needed by this one
test.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This test had to special case ARM, where error handlers are not
NORETURN functions. The xtensa/asm2 layer has the same behavior
(albeit for a different reason). Add it to the list, and clean up the
explanation a bit.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Simple SMP test to validate the two threads can be simultaneously
scheduled. Arranges things such that both threads are at different
priorities and never yield the CPU, so on a uniprocessor build they
cannot be fairly scheduled. Checks that both are nonetheless making
progress.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The xtensa-asm2 work included a patch that added nano_internal.h
includes in lots of places that needed to have _Swap defined, because
it had to break a cycle and this no longer got pulled in from the arch
headers.
Unfortunately those new includes created new and more amusing cycles
elsewhere which led to breakage on other platforms.
Break out the _Swap definition (only) into a separate header and use
that instead. Cleaner. Seems not to have any more hidden gotchas.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Simple test of spinlock semantics. Bounce between two CPUs locking
and releasing, validating that nothing changes at unexpected times.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
_Swap() is defined in nano_internal.h. Everything calls _Swap().
Pretty much nothing that called _Swap() included nano_internal.h,
expecting it to be picked up automatically through other headers (as
it happened, from the kernel arch-specific include file). A new
_Swap() is going to need some other symbols in the inline definition,
so I needed to break that cycle. Now nothing sees _Swap() defined
anymore. Put nano_internal.h everywhere it's needed.
Our kernel includes remain a big awful yucky mess. This makes things
more correct but no less ugly. Needs cleanup.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Split the search into two loops: in the common scenario, where device
names are stored in ROM (and are referenced by the user with CONFIG_*
macros), only cheap pointer comparisons will be performed.
Reserve string comparisons for a fallback second pass.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
The previous default, "config-threadnet.h", is more or less arbitrary
choice made in a commit 312def2c78 1.5 years ago. In particular,
it's not related to Thread support in Zephyr per se (there was no
such support at that time).
It doesn't make sense to have a default intended for a particular,
not widely used (yet) protocol. Instead, the default should work
out of the box with a contemporary widely deployed arrays of TLS
servers, which are HTTPS server. config-mini-tls1_2.h works with
https://google.com, and by extension, with many other servers on
the Internet.
So, have that as the default, and let applications with special
needs to override that to what they need.
Addresses: #6132
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
platform_whitelist does not deal with comma separated strings. Also
remove build_only option, this should also run on those devices.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The read/write_kernel_stack tests are confusingly named and incorrectly
implemented for ARM; they are intended to test that user mode threads
cannot read or write their privileged stacks. The privileged stacks
on ARM are not relative to the user stack, and thus their location
cannot be computed from the user stack. To find the privileged stack on
ARM, we have to use _k_priv_stack_find(), which we do during setup
in test_main() rather than from the usermode thread itself. Accessing
thread_stack directly from the test function requires making it
non-static in ztest, so we also give it a ztest_ prefix to avoid
collisions with other test programs. Rename the test functions and
global pointer variable to more accurately reflect their purpose.
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Prior to this commit, `flash_area_layout()` was being passed a pointer
to the incorrect type (`uint32_t *` where `int *` was expected). This
caused the following warning to be reported:
```
[...]/subsys/storage/flash_map/flash_map.c: In
function 'flash_area_get_sectors':
[...]/subsys/storage/flash_map/flash_map.c:191:32:
warning: passing argument 2 of 'flash_area_layout' from incompatible
pointer type [-Wincompatible-pointer-types]
return flash_area_layout(idx, cnt, ret, get_sectors_cb, &data);
^~~
[...]/subsys/storage/flash_map/flash_map.c:136:12:
note: expected 'int *' but argument is of type 'uint32_t * {aka long
unsigned int *}'
static int flash_area_layout(int idx, int *cnt, void *ret,
^~~~~~~~~~~~~~~~~
```
This commit changes the argument type to `u32_t` for both functions.
Signed-off-by: Christopher Collins <ccollins@apache.org>
Add a testcase.yaml configuration to spi_loopback test to include
it into sanitycheck.
Fixes#4576
Signed-off-by: Daniel Wagenknecht <wagenknecht.daniel@gmail.com>
This restores the board specific configurations that were present
before moving the test to using KConfig.
<board>.conf files from boards subdirectory get merged with
prj_base.conf file.
Signed-off-by: Daniel Wagenknecht <wagenknecht.daniel@gmail.com>
Convert this test to using KConfig instead of conditional compilation.
Standard configuration is provided by prj_base.conf and KConfig
default values.
Remove prj_<board>.conf files.
Signed-off-by: Daniel Wagenknecht <wagenknecht.daniel@gmail.com>
This patch adjusts the calculation of the overflow size for the kernel
stack tests which read/write to areas below the current user stack.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Convert the mesh code to use the new net_buf_siple APIs. This has the
benefit of saving 4 bytes off the stack due to the not needed pointer.
Also update the publication context helpers to map to the new
net_buf_simple API in an intuitive way.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Application should normally declare a bt_uuid with proper type and then
use bt_uuid_cmp.
Fixes#5162
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The net_buf unit tests were doing some pretty hacky stuff with
defining a dummy _net_buf_pool_list variable to fulfil the linker
magic that happens with a real build. Until now the code got lucky in
that the simple net_buf_alloc() tests didn't depend on
_net_buf_pool_list being valid, however with the coming redesign even
net_buf_alloc will require proper setup of this.
Since the unit tests were extremely minimal, and not testing anything
beyond what tests/net/buf already tests, just remove them for now.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add a new build variant that builds for Nordic nRF52832 with the new
MCUboot CONFIG_BOOTLOADER_MCUBOOT Kconfig variable set.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This PR includes the required changes in order to support
conditional compilation for Armv8-M architecture. Two
variants of the Armv8-M architecture are defined:
- the Armv8-M Baseline (backwards compatible with ARMv6-M),
- the Armv8-M Mainline (backwards compatible with ARMv7-M).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add test application for Nios-II i2c core on Altera MAX10 board.
This test uses ADV7513 HDMI I2C slave module on Altera MAX10
board to perform i2c read and write operations. For more details
on ADV7513 HDMI module, please refer to the following link.
https://ez.analog.com/docs/DOC-1986
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
The existing version of crc16_ccitt() is actually CRC-16/AUG-CCITT and
gives different results to Linux, Contiki, and the CRC unit in the
SAM0 SOC. This version matches Linux.
Note that this is an incompatible API change.
Signed-off-by: Michael Hope <mlhx@google.com>
Added support in tests/kernel/tickless for ARCH_POSIX
and enabled this test for this architecture
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
This test can also be run in ARCH_POSIX
+
added a filter in the test yaml so it does not float fault
with too low HW frequencies
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
If the systick period is < 5ms the clock testcase will
stall.
Added a note to warn whoever hits it.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
The introduction of device tree support sensors need to update the
dts.fixup file in build_all to make sure that we still build.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
It is faster to operate directly on flash_area pointer instead
of fetch it all the time using the fcb flash area id.
Also as f_area_id was needed only for get appropriate flash_area
pointer, so it is better to pass it only while initialization
the fcb and not store it in fcb instance data at all.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
fcb sectors description switch from using array of flash_area
structures to array of flash_sector structures.
This patch aligns tests to this change.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Test case should first check for next block in the coap packet and
unref the packet (assuming packet has been sent).
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Check the fault reason against the expected value.
This is presently architecture-specific, and possibly
reflects a bug on ARM (all faults end up with reason 0,
even though ARM does define a separate value for Oops).
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Previously we were handling any fault during test execution as
a pass condition. Explicitly indicate when a fault is expected
and fail the test if we encounter an unexpected fault.
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
To avoid indeterministic behaviour of the tests
which leads to changing coverage reports, let's
finish the tests exectuion as soon as they pass
or fail.
Also let's return 0 to the shell if the test passed,
and 1 if it failed.
(Reverting
f9af42f078c93eca8b9f461f91b6cafddb57a35d and
07c9163f67
)
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
This patch does several things, most notably it changes the semantics
of CONFIG_DEBUG. CONFIG_DEBUG continues to behave as a vaguely defined
"debug mode" that enables printf's, -Og, etc. but now the user may
choose to be in "debug mode" while using a different optimization
level than -Og.
Tp support this a new config is defined to enable -Og;
CONFIG_DEBUG_OPTIMIZATIONS.
Additionally CONFIG_SIZE_OPTIMIZATIONS is introduced to allow the user
to explicitly request optimizing for size instead of relying on
defaulting to it.
The three config's {NO,SIZE,DEBUG}_OPTIMIZATIONS are now organized in
a Kconfig choice to ensure that at most one can be enabled at a time.
Finally, selected users of CONFIG_DEBUG have been ported to use one of
the optimizations configs when it was clear from usage that the
intention was to behave differently when using a different
optimization level and not when in "debug mode".
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Added a new config option which lowers the compiler
optimizations to -O0 independently of other flags.
CONFIG_COVERAGE uses it now instead of having its own
choice in CMakeLists.txt
Fixes#5720
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Tests system call memory buffer read/write validation using the
k_pipe_get() and k_pipe_put() calls from a userspace thread.
Specifically, this tests _SYSCALL_MEMORY_READ/WRITE checks
by the system call handler by attempting to read/write to a
kernel object.
write_kobject_user_pipe() attempts to write over a kernel object
by using the kernel object's location as the buffer to place
the data read from the pipe.
read_kobject_user_pipe() attempts to read a kernel object by using
the kernel object's location as the location of data to be placed
into the pipe.
Tested on qemu_x86 and frdm_k64, passes on both.
Signed-off-by: Joshua Domagalski <jedomag@tycho.nsa.gov>
Added three tests for kernel objects focusing on 1) revoking
access to a k_object that the thread does not have
permissions to access, 2) accessing a k_object after
permissions to access it were revoked, and 3) trying to
revoke access to a k_object from a parent thread by a
child thread. Additionally, added a test for
k_thread_user_mode_enter().
revoke_noperms_object() tests by calling
k_object_access_revoke() on a semaphore (kernel object) that it
does not have access to (ksem).
access_after_revoke() tests ability to access a semaphore after
access has been revoked by itself.
revoke_other_thread() tests whether a thread can revoke access
for an object for which it has permissions from a thread for
which it does not have permissions.
user_mode_enter() tests whether k_thread_user_mode_enter()
truly enters user mode.
Tested on qemu_x86 and frdm_k64 with pr-4974 applied, passes
on qemu_x86 but requires small fix for ARM (will submit
separately).
Signed-off-by: Joshua Domagalski <jedomag@tycho.nsa.gov>
Provided separate event information structs based on events. This way
user will know what kind of information will be received to that
particular event.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
In case of split host & controller we may need to do ACL segmentation
of packets. Sending the composition data will already have allocated
three TX buffers, so trying to segment the first one further will
result in a deadlock. Increase the buffer count from the default (3)
to 4 to work around this risk.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Increasing the IPv6 multicast address count from 2 to 5 so that
tests will always run ok.
Fixes#4401
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Now that we have an application level dts fixup, we can re-enable the
fxos8700 sensor in the build_all test. Also added fxas21002 and max30101
sensors which were missing.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Rename the nano_internal.h to kernel_internal.h and modify the
header file name accordingly wherever it is used.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
The following drivers are in the process of support getting their I2C
name, bus, address params from device tree. However if a given board
that supports device tree doesn't have one of these sensors we can't
build it.
To address this we add a dummy dts.fixup at the application level with
provides values for the defines we'd normally get from the dts
generation.
Fixes: #5722
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Removed CONFIG_FLASH_PAGE_LAYOUT because it is already selected
by NFFS kconfig itself. Some other keywords were duplicated.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
CONF_FILE was overwritten by boilerplate.cmake so not proper
settings were took for tests. NRF5 flash driver had changed
its name to one defined by DT (see #5773) - which causes
incompatibility witch previous settings.
This patch solves this problems.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
We want to move to use a common FLASH_DEV_NAME across the various flash
drivers. So samples, tests, or other code can be a bit more generic. So
replace CONFIG_SOC_FLASH_NRF5_DEV_NAME with FLASH_DEV_NAME.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add conditional compilation and move code to support
building a non-connectable Bluetooth shell application.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
We can now send a signal and exit gracefully. This is to maintain
consistency across other runners and samples that can run natively but
do not have a test hook or macro to kill the application in completion.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The output of those samples can be parsed and verified by sanitycheck,
so lets use the console harness for this.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Reusing the k_thread structure requires a cleanup of all essential
info. We need to remove the ztest_thread information from the timeout_q.
If left untouched, when a tick occurs the thread's delta_ticks_from_prev
would be corrupted. This inturn causes a chain reaction of problems.
Thus once the unit test is completed the timeout_q is scrubbed.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Running this testcase on qemu without userspace enabled it
crashes. The testcase was modifing page table information
of the bss region. This in turn caused some variables to be
inaccessible. Fixed it by moving the page manipulation to a
different location.
GH-5646
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Remove SPI_*_IRQ_PRI from tests and samples.
Using DT to get the *_IRQ_PRI, we can't
override it using Kconfig.
If needed, use a BOARD_NAME.overlay file to
override default values.
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
This reverts commit 5e545e47fb.
This is breaking some tests, needs to be retested with latest master.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Reusing the k_thread structure requires a cleanup of all essential
info. We need to remove the ztest_thread information from the timeout_q.
If left untouched, when a tick occurs the thread's delta_ticks_from_prev
would be corrupted. This inturn causes a chain reaction of problems.
Thus once the unit test is completed the timeout_q is scrubbed.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Fix in the prj.conf so the test will also work in boards which
by default compile a BT controller.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Make it possible to run in other posix boards.
By default, if the POSIX board does not define the TICK_IRQ
just run without that part of the test, printing a note.
The place where other POSIX boards should define it, is also
clear, and should be easy to keep those lines free from merge
conflicts in the future.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
This test should be blacklisted for any board based
on the POSIX arch, not just the native_posix board
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
BT does use a semaphore, which does cause the count of sempahores to
fail, disable BT here to only keep locally created objects.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Introduce flas_map module is abstraction over flash memory and its
driver for using flash memories along with description of
available flash areas.
Module provides simple API for write/read/erase and so one.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
What this test actually does is verify internal APIs for manipulating
the MMU specifically on the X86. It is not compatible with other arches.
Moved to live with the rest of the memory protection tests.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
PTS requires the composition data of size that cannot be sent in
single PDU. This patch adds Configuration and Health Client models
to the root_models to increase the Elements size in Composition Data
Page 0.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
The test case used a stack which was not aligned to 4kB. Hence an
assert was catching this issue.
GH-5539
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Use ztest API in legacy test to support ztest
framework and also update README according to new
output.
Signed-off-by: Punit Vara <punit.vara@intel.com>
Basic test for sys_kernel_version_get verifying macros work correctly
and we get the expected version parts using the macros.
Fixes#4777
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This disables CONFIG_BT_MESH_LPN_AUTO flag in Kconfig.
LPN is enabled by calling BTP Low Power Node command
if requested.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Build with coverage enabled for any other boards or applications is
useless at least right now. Make sure we only enable coverage for native
applications.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This adds commands to manage Friend node Subscription List.
Those will be used to add or remove and group/virtual address
from subscription list.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This command will be used to test if model can properly send
segmented and unsegmented messages to a given destination address.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
mbedTLS include directories will now default to be in the 'app'
include path when mbedTLS has been enabled.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Of these, only struct net_ipv6_nbr_data::send_ns is a descriptive
change:
send_ns is used for timing Neighbor Solicitations in general, not
just for DAD.
The rest are typo/grammar fixes.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This is just a build test, so make it part of the overall build test
instead of having a special test case for it.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Too much duplication in test structure, just call this api and being
under aio, explains that it is an API test for AIO.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We are getting warnings when building with native port:
used with length equal to number of elements without multiplication by
element size
This fixes the call of memset.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The following 3 testcases are blacklisted for the POSIX
arch / simple_process BOARD:
* tests/drivers/ipm : won't compile due to missing
__stdout_hook_install() [part of minimal libc]
(POSIX arch uses the native libc)
* tests/kernel/mem_protect/stackprot : will crash
"natively" when trying to corrupt the stack and therefore
will fail the testcase. The current understanding is that
the POSIX arch should let the native OS handle faults,
so they can be debugged with the native tools.
* samples/cpp_synchronization : it is not possible
to build cpp code yet on top of the posix arch
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Added small delay in each iteration of the critical_loop
loop for the posix arch:
For this arch this loop and critical_rtn would otherwise
run in 0 time and therefore the test would never finish.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
test/timer/timer_api use k_busy_wait to implement the
tests' busy_wait_ms, for archs which require a different
type of busy waiting
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
terminate process as soon as the testcase is done
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
For the POSIX arch we rely on the native OS to handle
segfaults, and stack overflows.
So that we can debug them with normal native tools.
Therefore these 2 are ifdef'ed for this arch in this test
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
With the native port we are able to generate coverage reports, add the
needed options to the compliler and add a kconfig option to enable this
on the supported architectures.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
benchmark/app_kernel test was giving a float exception
if the operations were performed faster than the
system timer resolution.
Added a safety macro in all divisions to avoid the fault
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Having posix headers in the default include path causes issues with the
posix port. Move to a sub-directory to avoid any conflicts.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Enabled compiler definition flag TEST_CASE_SLEEP_SUCCESS
which was missing on migrating to cmake.
Signed-off-by: Nirmala Devi <nirmala.devix.m@intel.com>
This adds stubs for Core Unregister Service command implementation.
It will be used to clean up the stack and tester after test case
execution.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
The stub is supposed to be there to bring up a CPU that needs to be
brought up because the platform requires so, but it needs to be as
practically quiet in terms of printing to the serial port as possible.
Thus, disable printing the boot banner by default.
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add tests of the ability to read or write the stack of another thread.
Use semaphores for explicit synchronization of the start and end of the
other thread to ensure that the attempted stack access occurs while the
thread is alive. This ensures that the MMU/MPU has been configured at
least once to allow userspace access to the stack, and that any
removal of access upon thread termination has not yet occurred. This
therefore should exercise changing the MMU/MPU configuration to remove
access to the other thread's stack when switching back to our
thread.
Tested on qemu_x86 (pass) and on frdm_k64f (with and without the ARM
userspace patches; with them, the tests pass; without, they fail as
expected). Also, as with most of the other tests, if you replace
ztest_user_unit_test() with ztest_unit_test(), then the tests fail as
expected.
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
This chack shall be performed on attribute uuid type, not uuid provided
in Gatt Get Attributes command paramteres.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Those commands will be used for qualification purposes to verify
the functionality of Mesh Health Model.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This event is needed for qualification purposes to verify functionality
of Mesh Network layer.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This patch removes the extraneous priv_insn test as it is a duplicate
of the following test that writes to the control register. For ARM,
unprivileged contexts which access control registers does not result
in a fault. It results in no modification of the register, so we have
to check that a modification occurred.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch fixes the calculation of the privileged stack portion. The
ztest threads have a stack size of 2048. The privileged area resides in
the lowest 512 bytes. So use the definition of the stack size to get to
the right area.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Testcase yaml requires some interactive inputs to be provided for
execution and hence fails on automation. Hence making it as build
only
Signed-off-by: ravishankar karkala Mallikarjunayya <ravix.shankar.km@intel.com>
1. MLD events now can happen before the test starts to run, (at iface
initialization time), so use static initialization of test semaphore.
2. Don't use a well-known multicast group like ff02::1 (all nodes),
as they are managed by the underlying stack. Use a dedicated test
address (ff10::1 here).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This introduced two BTP events to indicate provisioning link state.
This is needed for testing purposes, since PTS requests tester to
confirm link state.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This procedure is used query local GATT Server for attributes
based on given search pattern. Attributes can be searched using
Attribute Handle range and Attribute Type.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This will be used for verification in GATT test cases.
This procedure is used query local GATT Server for attributes
based on given search pattern. Attributes can be searched using
Attribute Handle range and Attribute Type.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Due to insufficient ISR stack memory the irq offload was
corrupting the memory.
GH-4766
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
The following files didn't have any copyright or license headers on them
when they got contributed. So add the SPDX Apache license and
appropriate copyright info:
boards/arm/stm32l476g_disco/pinmux.c
samples/basic/threads/src/main.c
tests/net/socket/tcp/src/main.c
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
It is supported to add give extra flags to the linker from the
commandline like this:
cmake -DEXTRA_LDFLAGS=-Lmy_dir path
But unfortunately this was broken during the CMake
migration. Interestingly, the reason that it was broken is that KBuild
was also partially broken. KBuild would pass on EXTRA_LDFLAGS when
object files were linked together into built-in.o files, but it would
not use EXTRA_LDFLAGS for the final link into an elf file.
This patch fixes EXTRA_LDFLAGS.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Testcase developed x86mmu specific, to validate
existing APIs. This checks for the PDE/PTE set
on the address and returns if some violation occurs or not.
Signed-off-by: Akhilesh Kumar Upadhyay <akhilesh.kumarx.upadhyay@intel.com>
Remove references to k_mem_pool_defrag and any related bits associated
with mem_pool defrag that don't make sense anymore.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This is still work-in-progress, but putting it up in case it is
helpful to people working in this area and for early comments.
Add a set of tests to validate the expected security properties
of threads created with K_USER when CONFIG_USERSPACE=y. This can
be used as a regression test for architectures that already implement
this support and as a validation test for others.
I considered incorporating these tests into the existing protection
test, but decided against it since protection does not enable or rely
upon CONFIG_USERSPACE for its existing tests and passes on everything
that provides MPU or MMU support, even without full userspace support.
I also considered incorporating these tests into the existing
obj_validation test, but decided against it since obj_validation only
tests the object validation/permission logic, does not run any user
mode threads (or strictly depend on that support), and passes
on both x86 and arm today, unlike these tests. That said, I have no
strong objections if it would be preferable to fold these into it
(and perhaps rename it to be more general).
The current tests implemented in this test program verify the following
for a thread created with K_USER:
is_usermode: is running in usermode
priv_insn: cannot invoke privileged insns directly
write_control: cannot write to control registers
disable_mmu_mpu: cannot disable memory protections (MMU/MPU)
read_kernram: cannot read from kernel RAM
write_kernram: cannot write to kernel RAM
write_kernro: cannot write to kernel rodata
write_kerntext: cannot write to kernel text
read_kernel_data: cannot read __kernel-marked data
write_kernel_data: cannot write __kernel-marked data
read_kernel_stack: cannot read the kernel/privileged stack
write_kernel_stack: cannot write the kernel/privileged stack
pass_user_object: cannot pass a non-kernel object to a syscall
pass_noperms_object: cannot pass an object to a syscall without a grant
start_kernel_thread: cannot start a kernel (non-user) thread
Some of the tests overlap and could possibly be dropped, but it
seems harmless to retain them. The particular targets of read/write
tests are arbitrary other than meeting the test criteria and can be
changed (e.g. in data, rodata, or text) if desired to avoid coupling
to kernel implementation details that may change in the future.
On qemu_x86, all of the tests pass. And, if you replace all
occurrences of ztest_user_unit_test() with ztest_unit_test(), then
all of the tests fail (i.e. when the tests are run in kernel mode,
they all fail as expected). On frdm_k64f presently (w/o the arm
userspace patches), all of the tests fail except for write_kernro and
write_kerntext, as expected.
ToDo:
- Verify that a user thread cannot access data in another memory domain.
- Verify that a user thread cannot access another thread's stack.
- Verify that a user thread cannot access another thread's kobject.
- Verify that k_thread_user_mode_enter() transitions correctly.
- Verify that k_object_access_revoke() is enforced.
- Verify that syscalls return to user mode upon completion.
- Verify that a user thread cannot abuse other svc calls (ARM-specific).
- Other suggested properties we should be testing?
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Some PTS test cases only work when we're advertising using Network
Identity. Using the default timeout of 60 seconds for Node Identity
will cause this test cases to fail (i.e. the PTS gives up before
Zephyr transitions to advertising from Node Identity to Network
Identity).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
test_main() takes no arguments, so this was causing a fault
after returning from test_main due to the stack canary checking.
Before, the test run ends with:
PROJECT EXECUTION SUCCESSFUL
***** CPU Page Fault (error code 0x00000011)
Supervisor thread executed address 0x00400000
PDE: 0x027 Present, Writable, User, Execute Enabled
PTE: 0x80000000267 Present, Writable, User, Execute Disable
Current thread ID = 0x00401080
Faulting segment:address = 0x0008:0x00400000
eax: 0x00000000, ebx: 0x00000000, ecx: 0x0040b19c, edx: 0x000056df
esi: 0x00000000, edi: 0x00000000, ebp: 0x000051c0, esp: 0x0040b1d8
eflags: 0x246
Caught system error -- reason 6
After, the test run ends with:
PROJECT EXECUTION SUCCESSFUL
Reported-by: Joshua Domagalski <jedomag@tycho.ncsc.mil>
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
This makes it possible to pass all IV Update tests without having to
build a custom configuration for some of the tests. We also disable
the feature in all sample configurations, but leave it on in the
tests.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
With the introduction of controller's advanced features
Kconfig option, some of the dependent options where not
enabled in the init tests build. Fixed by enabling the
advanced features Kconfig options.
Also, updated conf files to reflect latest set of Kconfig
options supported by the Bluetooth controller subsystem.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
- Renaming NET_L2_RAW_CHANNEL to NET_RAW_MODE
- Create a generic IEEE 802.15.4 raw mode for drivers
- Modify the IEEE 802.15.4 drivers so it passes the packet unmodified,
up to code using that mode to apply the necessary changes on the
received net_pkt according to their needs
- Modify wpanusb/wpan_serial relevantly
Fixes#5004
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The generic Bluetooth shell was never intended to be enabled. Also
make the default advertised name a bit nicer.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The qemu main() seems to require more stack than the arm equivalent.
Increase the stack size to 320 to avoid crashes.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The app was declaring model publication contexts but missing buffers
for the publication messages.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The only generally available model supporting publication that's
convenient to be used for testing is the Health Server Model.
Unfortunately since this model supports period publication, the
non-periodic side got less attention and had some bugs.
The first thing that needs to be done is to verify that the period
returned by bt_mesh_model_pub_period_get() is positive. If it's zero
then no periodic publication should take place.
Another thing that this patch cleans up is the naming of the callback
used for periodic publishing. There's no need do require the callback
to call bt_mesh_model_publish() since this must happen no matter what,
so instead rename the callback from 'func' to 'update' and have the
access layer call bt_mesh_model_publish() if the callback was
successful.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Relies on loopback network interface added recently and being able
to run QEMU without connecting to host networking.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Trying to always include mesh support resulted in the app not fitting
on some boards (e.g. nrf51_pca10028). Put the mesh-specific
configuration in a separate configuration file instead.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Having a dedicated Mesh shell app instead of extending the existing
shell app will let us fine-tune board-specific configurations for Mesh
in the future (not to mention that extending the shell app already
resulted in it not fitting on some boards).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Model publication was broken in a couple of ways:
- The Publish Retransmit State was not taken into account at all
- Health Server used a single publish state for all elements
To implement Publish Retransmit properly, one has to use a callback to
track when the message has been sent. The problem with the transport
layer sending APIs was that giving a callback would cause the
transport layer to assume that segmentation (with acks) is desired,
which is not the case for Model Publication (unless the message itself
is too large, of course). Because of this, the message sending context
receives a new send_rel ("Send Reliable") boolean member that an app
can use to force reliable sending.
Another challenge with the Publish Retransmit state is that a buffer
is needed for storing the AppKey-encrypted SDU once it has been sent
out for the first time.To solve this, a new new net_buf_simple member
is added to the model publication context. The separate 'msg' input
parameter of the bt_mesh_model_publish() API is removed, since the
application is now expected to pre-fill pub->msg instead.
To help with the publishing API change, the Health Server model gets a
new helper macro for initializing the publishing context with a
right-sized publishing message.
The API for creating Health Server instances is also redesigned since
it was so far using a single model publishing state, which would
result in erratic behavior in case of multiple elements with the
Health Server Model. Now, the application needs to provide a unique
publishing context for each Health Server instance.
The changes are heavily intertwined, so it's not easily possible to
split them into multiple patches, hence the large(ish) patch.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add in6addr_any and in6addr_loopback which are defined in RFC2553 Basic
Socket Interface Extensions for IPv6.
Signed-off-by: Aska Wu <aska.wu@linaro.org>
Currently Zephyr is running from RAM, and the space where
instructions can be executed from is quite small.once Flash
cache is enabled in ESP32 port we can remove this check.
Signed-off-by: Nishikant Nayak <nishikantax.nayak@intel.com>
Add a command for getting and setting the model publication. We also
have to adjust the app's configuration, since both the Model
Publication Set and Status messages are segmented messages, meaning we
need two TX and RX segment contexts.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This patch do following things :
- fix checkpatch warnings
- replace conditions with ztest apis wherever necessary
Signed-off-by: Punit Vara <punit.vara@intel.com>
Make legacy test case use of ztest apis to support
ztest framework.
Reduce ztest stack size to 512 otherwise region 'SRAM'
will overflow for nucleo board.
Signed-off-by: Punit Vara <punit.vara@intel.com>
Added a case for ARC in the test so it builds. ARC MPU has execute
permision bit so we can enable the NO_EXECUTE_SUPPORT testing.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
It may be useful for the app to know what the initial NetKeyIndex that
it was given during provisioning is.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This is in anticipation of soon adding health client support, which
could then cause confusion due to the ambiguous API names.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Now that there's support for configuration client as well, rename cfg
to cfg_srv to avoid any confusion.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add the ability to track the provisioning bearer through an extra
parameter to link_open/close. Also introduce new public functions to
enable/disable specific provisioning bearers. This also means that one
now needs to explicitly enable provisioning bearers after calling
bt_mesh_init().
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The end_sema k_sem was only initialized on one of the several paths
that used it, leading to some crazy clobber-the-run-queue behavior
that was dependent on linkage order (see the linked bug) when end_sema
and the pipe object were made non-static..
Adding a k_sem_init() call fixes the corrupt issue, but really the
right thing is to use the DEFINE macro, so do that instead. Note that
that the initializer changes the linkage order too (by putting the
semaphore in a separate segment), so... yeah, it's actually impossible
to prove that this patch in isolation resolves the issue seen without
manual validation.
Issue: https://github.com/zephyrproject-rtos/zephyr/issues/4366
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Function flash_read was calling without checking return value.
(Coverity CID: 178794)
This patch cover this issue.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Add a basic shell skeleton for Mesh, containing basic command for
initialization, provisioning and reset.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The conf file name must be of the form prj_<board>.conf for it to be
automatically chosen for a given board.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Remove references to make-centric build process, and refer to the
steps in a more neutral way (which is equally applicable to using
either make or ninja as the generator type).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The needed options to QEMU_EXTRA_FLAGS now get set from a single
central place, so applications don't need to do it anymore.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Use the default values for scan latency and receive delay, and enable
useful logging, like that for LPN.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The default of the stack is now to automatically enable LPN
functionality after a given timeout.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Introducing CMake is an important step in a larger effort to make
Zephyr easy to use for application developers working on different
platforms with different development environment needs.
Simplified, this change retains Kconfig as-is, and replaces all
Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild
offers is replaced by a set of CMake extentions. These extentions have
either provided simple one-to-one translations of KBuild features or
introduced new concepts that replace KBuild concepts.
This is a breaking change for existing test infrastructure and build
scripts that are maintained out-of-tree. But for FW itself, no porting
should be necessary.
For users that just want to continue their work with minimal
disruption the following should suffice:
Install CMake 3.8.2+
Port any out-of-tree Makefiles to CMake.
Learn the absolute minimum about the new command line interface:
$ cd samples/hello_world
$ mkdir build && cd build
$ cmake -DBOARD=nrf52_pca10040 ..
$ cd build
$ make
PR: zephyrproject-rtos#4692
docs: http://docs.zephyrproject.org/getting_started/getting_started.html
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
There are some PTS tests, which expect the IUT to send some beacons
after provisioning, so enable the feature by default.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This reverts commit b66a6acad7.
The mesh test app is (at least for now) only supposed to be manually
run. It e.g. contains special configurations for feature-specific
testing using the Bluetooth PTS.
The ztest conversion that was done to the app doesn't really make any
sense since nothing of essence is tested by the ztest hooks and
everything that the app intends to be tested need manual action either
way.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Create http library that uses net-app instead of net_context
directly. The old HTTP API is deprecated.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This patch removes checkpatch warnings as well as
make use of ztest apis to convert legacy test to ztest.
Signed-off-by: Punit Vara <punit.vara@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
- Test ipv4/ipv6 send() and recv().
- Test ipv4/ipv6 sendto() and recvfrom().
- Test ipv4/ipv6 sendto() and recvfrom() with NULL dest address.
Signed-off-by: Aska Wu <aska.wu@linaro.org>
This should clear up some of the confusion with random number
generators and drivers that obtain entropy from the hardware. Also,
many hardware number generators have limited bandwidth, so it's natural
for their output to be only used for seeding a random number generator.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Two tests were on the knife-edge of their current stack limit and
were overflowing when UART system calls were added and userspace
enabled.
Test case stack sizes are often pulled out of thin air, the current
value of 256 was just a guess.
Kick these stacks up to 384; verified with sanitycheck --all that
this doesn't break anything.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The call to net_context_recv() with timeout returned -ETIMEDOUT
even when data was returned properly and there was no timeout.
Fixes#4565
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This test runs with ztest suite. It will verify get_entropy
operation of entropy driver.
Signed-off-by: Vikram Singh Shekhawat <vikramx.shekhawat@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
If NET_L2_IEEE802154 and NET_IPV6 are enabled:
- NET_6LO is enabled
- NET_L2_IEEE802154_FRAGMENT is enabled
Thus removing setting this config options to yes where applicable.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
All ztest_* apis now support format specifier which will
evetually help to pass variable arguments to ztest assert
apis in different test cases while showing error messages.
Signed-off-by: Punit Vara <punit.vara@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When the header file is located in the same directory as the source
file it is better to use a relative quote-include, e.g.
than a system include like
Avoiding the use of system includes in these cases is beneficial
because;
* The source code will be easier to build because there will be fewer
system include paths.
* It is easier for a user to determine where a quote-include header
file is located than where a system include is located.
* You are less likely to encounter aliasing issues if the list of
system include paths is minimized.
Authors:
Anas Nashif
Sebastian Bøe
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
From RFC 7252, section 3
"The absence of the Payload Marker denotes a zero-length payload.
The presence of a marker followed by a zero-length payload MUST
be processed as a message format error."
Check empty payload when COAP_MARKER is found and add a test case to
cover it
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
The payload variable was one byte long but we read 32 bytes
from it.
Coverity-CID: 178064
Fixes#4397
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Using the PAE page tables it is possible to disable code execution
form RAM.
JIRA:ZEP-2511
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
main.c and test_thread_init.c merged.
All tests which don't require cooperative priorities now running in
user mode.
Userspace tag added to testcase.yaml.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Some unnecessary k_thread_abort() removed.
userspace tag added to testcase.yaml.
Suspend/resume, spawn_forever, and spawn_priority tests remain in
supervisor mode due to the priority requests they make.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Unnecessary k_thread_abort() removed from test_msgq_purge_when_put.
A single global msgq object is now shared instead of being declared
on thread stacks, except for an ISR test case which has had its
semaphore renamed.
Moved k_sem_init() call from msgq_thread() to test_msgq_thread()
to fix a race condition.
userspace tag added to testcase.yaml.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
main.c and test_sema_contexts.c merged
userspace tag added to testcase.yaml
stack-allocated semaphore in test_sema_thread2thread now just uses
the global semaphore with the same name.
ISR tests run in supervisor mode.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
main.c and test_alert_contexts.c merged.
User threads can't look inside the alert structures, so an extra
variable 'htype' introduced to track expectations for any given
alert object in alert_recv().
Alert objects have to be initialized by supervisor threads since
they register callbacks. An array of toplevel alert objects created
and initialized in test_main(), replacing the ones that used to
live on thread stacks.
Added userspace tag to testcase.yaml
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Main thread grants itself access to objects it or its children need
and does the rest of the test case in user mode.
Statically defined threads now all run in user mode, with permissions
granted via K_THREAD_ACCESS_GRANT().
Added userspace tag to testcase.yaml.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Attribute Value Changed Event will be used to indicate characteristic
or descriptor value change in local GATT Server database.
Event will be triggered when PTS performed ATT Write operation
successfully.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
These are simple tests for net-app testing. These do not try to
actually send anything to net but test mainly net-app setup and
close functionality.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Currently this is defined as a k_thread_stack_t pointer.
However this isn't correct, stacks are defined as arrays. Extern
references to k_thread_stack_t doesn't work properly as the compiler
treats it as a pointer to the stack array and not the array itself.
Declaring as an unsized array of k_thread_stack_t doesn't work
well either. The least amount of confusion is to leave out the
pointer/array status completely, use pointers for function prototypes,
and define K_THREAD_STACK_EXTERN() to properly create an extern
reference.
The definitions for all functions and struct that use
k_thread_stack_t need to be updated, but code that uses them should
be unchanged.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
GATT Server:
According to the API, include service declaration user data
points to the first service attribute to include.
bt_gatt_include structure is valid only for client role.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
We also need macros to assert that an object must be in an
uninitialized state. This will be used for validating thread
and stack objects to k_thread_create(), which must not be already
in use.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
A space-constrained device wouldn't enable this feature.
Fixes build errors since these tests constrain the size of
the IDT.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We add macros to define test cases that should be run with the CPU
in user mode, if the CPU supports it.
ztest_test_suite() declarations are now static as they can't go on
the main thread stack; the data gets shared between multiple threads.
It's better here anyway as a large test suite could fill up the main
stack, which is by default reduced to 512 bytes.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
set_ieee_addr, set_short_addr and set_pan_id are now unused by L2, so
removing their exposure through the radio API.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Further support will need work per-driver basis, as soon as the L2 will
be able to make usage of such support.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
- Dumping error messages split from _k_object_validate(), to avoid spam
in test cases that are expected to have failure result.
- _k_object_find() prototype moved to syscall_handler.h
- Clean up k_object_access() implementation to avoid double object
lookup and use single validation function
- Added comments, minor whitespace changes
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This API only gets used inside system call handlers and a specific test
case dedicated to it. Move definition to the private kernel header along
with the rest of the defines for system call handlers.
A non-userspace inline variant of this function is unnecessary and has
been deleted.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The test should only run on platforms where CONFIG_USERSPACE
dependencies are met.
Remove the whitelist, the filter will capture the right platforms.
Fixes: #4050
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
There are several issues with the dev_config union used as a
convenience when calling the i2c_configure api. One, the union is well
name spaced protected and doesn't convey use with just i2c. Second
there are assumptions of how the bits might get packed by the union
which can't be guaranteed. Since the API takes a u32_t lets change in
tree uses to using the macros to setup a u32_t and make the union as
deprecated.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
ztest unit tests run on the host system, so provide those empty files to
make it build host tests. Those files are auto-generated and not
available when building unit tests.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This patch updates tickless testcase replacing existing support
for Atmel SAM3X with support for the whole Atmel SAM family.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
As previous test without info, this one will be thrown with/without
receiver 1 and 2 times.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Adding net_mgmt_event_notify_with_info() which lets the event notifier
to pass dedicated data along with the event. The size of data that can
be passed must be limited to the biggest data passed (which will be
currently IPv6 + prefix).
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
ZoAP tests are modified to use new CoAP API. Also modified tests
name from 'zoap' to 'coap'.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Instead of having a board-specific config for this adc test, enable the
required battery-sense circuit by default at the board level when the
adc driver is enabled.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
- Add test cases of ipv4/ipv6 sendto() and recvfrom()
- Set the main stack size to 2048 to enable both ipv4 and ipv6 on
qemu_x86.
- Use net app for network setup.
Signed-off-by: Aska Wu <aska.wu@linaro.org>
patch fix the issue of unable to read from adc by setting
appropriate sampling delay.
The sampling delay should be set to resolution of adc + 2.
In adc qmsi driver the sampling delay received form application
is subtracted from resolution of adc + 2 , if the resultant value
is less than zero then zero is set as sampling delay. So in the
adc_simple application when 12 is passed as sampling delay driver
sets it as zero. So 26 is the minimum sampling delay should be
set in application for a adc with resolution of 12. The reason
to choose 30 was to maintain same value of sampling
delay between adc_simple and adc_api application.
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
These tests test the IPv4 multicast address add, lookup and
removal functions found for network interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
From section 3.4.5.3 in the Mesh Profile Specification 1.0:
"A node shall implement a Local Network Interface."
Removing the Kconfig option also helps clean up quite a lot of code.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
All moved under tests/kernel/mem_protect to reduce clutter. Many more
tests are coming for 1.10 and 1.11.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This adds performance test for nffs with open, close, read, write and
unlink sub test cases.
Origin: Original
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@codecoup.pl>
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
This patch adds NFFS test suite ported from Mynewt. The test cases are
pretty much the same as in original implementation, however some of
them had to be adjusted to cover differences in Mynewt and Zephyr
filesystem APIs. Also the code was reformatted in some places to make
checkpatch happy.
All test cases from "basic" group can be also run on nRF52840 (nRF52 and
nRF51 do not have enough RAM to run all tests as-is).
Origin: Apache Mynewt NFFS
URL: https://github.com/apache/mynewt-nffs/tree/master
Commit: 6639f7a432e70db00ef25d5e558aedbe503a3c9a
Purpose: NFFS test suite
Maintained-by: Zephyr
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@codecoup.pl>
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
nrf SOCs use external timer for measuring benchmarking stats.
Earlier this timer is programmed in 24 bit mode, due to which
is is getting expired in some of benchmark stats like mutex
lock/unlock. So configuring to 32 bit mode to avoid overflow.
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
Some of benchmark stats were not reported for nrf52/52 based SOCs.
This was because nrf based SOCs use external timer.
In timing info some of benchmark stats still use systick based APIs.
Due to which benchmarking number was not getting reported. So change
it to timer based for nrf.
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
If IPv6 is disabled, then it is useless to try to resolve
IPv6 address because "struct sockaddr" does not have enough
space to store IPv6 address.
Fixes#1487
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add a simple test which generates a file that can be included
into a .c file. Then verify in zephyr that the file contains
the same bytes as the original file.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Fixing regression, address family is now called sa_family.
The testcase.yaml file was missing so no tests were actually run.
After making test to run, it was also failing because link address
was accessed before first fragment was set. This caused null pointer
access.
Fixes#1474
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
There were bunch of config options in tests/net, net-shell and
wpan_serial sample, and those options had wrong name so they
were ignored by the code.
Fixes#1428
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Indenting preprocessor directives reduces the code readability, because
it make preprocessor directives harder to spot.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Added tests for the mcuboot interface module and the image
storage module.
Both tests are checking flash content produced by modules verified.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Do not print messages by default on console for test cases.
Use SYS_LOG_INF which provides functionality to choose print whenever
require.
Signed-off-by: Punit Vara <punit.vara@intel.com>
This patch eliminates need to add logging/sys_log.h in test
cases which required to use this header file.
Signed-off-by: Punit Vara <punit.vara@intel.com>
It's now possible to instantiate a thread object, but delay its
execution indefinitely. This was already supported with K_THREAD_DEFINE.
A new API, k_thread_start(), now exists to start threads that are in
this state.
The intended use-case is to initialize a thread with K_USER, then grant
it various access permissions, and only then start it.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
/tmp/bt-stack-tester is not a pipe, but unix domain socket.
This commit fixes respective "make run" errors:
qemu-system-arm: -serial pipe:/tmp/bt-stack-tester: Could
not open '/tmp/bt-stack-tester': No such device or address
qemu-system-arm: -serial pipe:/tmp/bt-stack-tester: could
not connect serial device to character backend
'pipe:/tmp/bt-stack-tester
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
The (artificially small) ISR stack was overflowing on this test when
CONFIG_DEBUG was enabled on qemu_x86. Really there's no reason to be
restricting stack size at all in a memory pool test, just remove those
settings and use the defaults, which are fine.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
If the query name is already in numeric format, there is no
need to send the query string to DNS server as we can just
convert it ourselves.
Jira: ZEP-2562
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
nrf SOC uses nrf rtc timer (not sys tick), which is 32kHz,
whereas CPU runs at higher speed (nrf52 runs at 64MHz).
So 32Khz is too slow to measure critical kernel parameters.
This patch does :-
1. Add support for nrf SOC for timing_info benchmarking.
2. Uses SOC timer to measure kernel parameters.
Jira: ZEP-2314
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
The API/Variable names in timing_info looks very speicific to
platform (like systick etc), whereas these variabled are used
across platforms (nrf/arm/quark).
So this patch :-
1. changing API/Variable names to generic one.
2. Creating some of Macros whose implimentation is platform
depenent.
Jira: ZEP-2314
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
We use UART1 for UART pipe in a number of qemu tests, so lets do the
same thing for the bluetooth test and move the bluetooth uart to UART2.
Jira: ZEP-2412.
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Implement the first Vendor-Specific Command of the Zephyr specification
other than the 3 mandatory ones already present in the codebase, along
with a Kconfig option to enable and disable the presence of the VS
commands.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The documentation of k_fifo_put mentions that the items must have 32
bits reserved for kernel use as that is where the sys_snode_t pointer
is placed but this detail was not taken into consideration when
designing the cmd_queue which access each element as a btp_cmd.
Note: This probably used to work just because k_fifo_get used to place
data directly into thread's swap_data so the kernel never really touched
the list but with the changes to use k_poll the list is always updated
exposing this issue.
Jira: ZEP-2568
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This was failing to build when the PWD was not that of the
tests/benchmarks/object_footprint because it was asking to load
$(PWD)/Kconfig.
Kconfig shall be specified with no directory location, as the file
will be imported relative to to Zephyr app's directory.
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
The verify_send_report() failed in quark_se_c1000_devboard because
the multicast group was already joined. We can safely ignore this
error for this specific test.
Fixes#1240
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This tests the situation when there are multiple threads calling
k_queue_get which was causing issues when using k_poll.
Jira: ZEP-2553
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This is necessary in order for k_queue_get to work properly since that
is used with buffer pools which might be used by multiple threads asking
for buffers.
Jira: ZEP-2553
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Arguments are not needed and in some cases are being set as unused in
the same function. The test_main function is called from ztest main
routine without any arguments.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We have a few systems with small amounts of flash that this test can't
fit into. For now I set the limit right above 32k, however that might
need to get bumped up if we have any systems with flash sizes between
32k and 64k.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Adds an #elif for ESP32 boards. Connect a wire from pin IO2 to pin IO4
so that the test can be executed.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
The size of the interrupt descriptor table is not really
relevant to this test.
If any driver enabled for the target board gets enabled and
has a priority level outside the IDT range, gen_idt.py is properly
reporting an error. The old C-based gen_idt seems to have allowed
this to slide by.
Issue: ZEP-2496
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The `z` vector was not initialized in the call to
uECC_vli_nativeToBytes(), resulting in undefined behavior. Use the
properly initialized `exp_z` array instead.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
POSIX requires struct sockaddr's field to be named "sa_family"
(not just "family"):
http://pubs.opengroup.org/onlinepubs/009696699/basedefs/sys/socket.h.html
This change allows to port POSIX apps easier (including writing
portable apps using BSD Sockets compatible API).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The array of k_thread "t" was declared non-static in 2 different
C files. Make them static.
Semaphores only used in local C file now declared static.
Use of variable 't' in thread_tslice() no longer shadows global
definition.
Fixes build errors with XCC compiler.
Increase RAM requirement to 20K.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Since Extended Scanner Filter Policies is an independent feature from
Controller-based Privacy, split it out so it can be built independently
and included without it.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Per ZEP-1958, Phase 2 of adding CC3220sf LaunchXL support,
was to "deprecate the CC3200 launchxl support in Zephyr
(redundant to the CC3220)."
Effectively, the CC3220 SOC replaces the CC3200.
This patch removes the following:
* the imported CC3200 SDK
* CC3200 SOC, board, DTS files.
* adjusts other files where cc3200 was mentioned.
Also, it fixes explicit references to CC3200 in generic
CC32xx driver files.
Jira: ZEP-1958
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
This adds a test that attempts to submit a work with 0 timeout thus
causing it to immediatelly be submitted to the queue so it is pending
execution which is then cancelled with k_delayed_work_cancel.
Note this can only be done with coop threads with the same or higher
priority otherwise the work_q thread is wakeup before
k_delayed_work_cancel takes place, thus why test_delayed_cancel uses
K_HIGHEST_THREAD_PRIO.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This has been a limitation caused by k_fifo which could only remove
items from the beggining, but with the change to use k_queue in
k_work_q it is now possible to remove items from any position with
use of k_queue_remove.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes use of POLL_EVENT in case k_poll is enabled which is
preferable over wait_q as that allows objects to be removed for the
data_q at any time.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Rename the BT_CONTROLLER prefix used in all of the Kconfig variables
related to the Bluetooth controller to BT_CTLR.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Right now we have various type conflicts between the json library and
newlib. Until these are resolved only build the json test if newlib
isn't enabled.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Previous stack definition caused following warning: passing argument 2
of 'k_thread_create' from incompatible pointer type.
Signed-off-by: Michał Kruszewski <michal.kruszewski@nordicsemi.no>
* add nested interrupt support for interrupts
+ use a varibale exc_nest_count to trace nest interrupt and exception
+ regular interrupts can be nested by regular interrupts and fast
interrupts
+ fast interrupt's priority is the highest, cannot be nested
* remove the firq stack and exception stack
+ remove the coressponding kconfig option
+ all interrupts (normal and fast) and exceptions will be handled
in the same stack (_interrupt stack)
+ the pros are, smaller memory footprint (no firq stack), simpler
stack management, simpler codes, etc.. The cons are, possible
10-15 instructions overhead for the case where fast irq nests
regular irq
* add the case of ARC in test/kernel/gen_isr_table
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Tests if preemptive threads are picked up as per priority.
This creates 10 threads with priority in increasing order
from 1 to N and each thread prints an Alphabet.
This test fails when threads are picked up out of order.
Jira: ZEP-2370
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
This creates 10 threads with equal priority and tests predictibility
of picking all threads in round robin fashion. Test fails when any
thread consumes more time than time slice allocated to it or threads
are not scheduled in round robin fashion.
Jira: ZEP-2371
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
This patch convert net test cases to use ztest framework APIs
which makes output unified to other test cases.
Signed-off-by: Punit Vara <punit.vara@intel.com>
This patch convert net test cases to use ztest framework APIs
which makes output unified to other test cases.
Signed-off-by: Punit Vara <punit.vara@intel.com>
- replaced test points with ztest APIs wherever possible
- replaced CONFIG_MAIN_STACK_SIZE with CONFIG_ZTEST_STACKSIZE
in config file, reduced size to 1024
JIRA: ZEP-2249
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
- replaced test points with ztest APIs wherever possible
- replaced CONFIG_MAIN_STACK_SIZE with CONFIG_ZTEST_STACKSIZE
in config file
JIRA: ZEP-2249
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
- replaced test points with ztest APIs wherever possible
- added CONFIG_ZTEST_STACKSIZE=320
JIRA: ZEP-2249
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
- replaced test points with ztest APIs wherever possible
- replaced CONFIG_MAIN_STACK_SIZE with CONFIG_ZTEST_STACKSIZE
in config file, reduced size to 896
JIRA: ZEP-2249
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
- replaced test points with ztest APIs wherever possible
- replaced CONFIG_MAIN_STACK_SIZE with CONFIG_ZTEST_STACKSIZE
in config file
JIRA: ZEP-2249
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
- replaced test points with ztest APIs wherever possible
- replaced CONFIG_MAIN_STACK_SIZE with CONFIG_ZTEST_STACKSIZE
in config file, reduced the size by half
JIRA: ZEP-2249
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
- replaced test points with ztest APIs wherever possible
- replaced CONFIG_MAIN_STACK_SIZE with CONFIG_ZTEST_STACKSIZE
in config file, reduced size by half
JIRA: ZEP-2249
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
shell_exec expects a string that is null-terminated but if line passed
to strncpy is equal or bigger than the buffer it will not produce a
null-terminated command.
Jira: ZEP-2474
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The API name space for Bluetooth is bt_* and BT_* so it makes sense to
align the Kconfig name space with this. The additional benefit is that
this also makes the names shorter. It is also in line with what Linux
uses for Bluetooth Kconfig entries.
Some Bluetooth-related Networking Kconfig defines are renamed as well
in order to be consistent, such as NET_L2_BLUETOOTH.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Print the entire memory areas of interest on error, instead of
stopping at the first null character.
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
This includes files for both polled and IRQ-driven I/O. The log level
is deliberately kept to ERROR to try to shake out any timing-dependent
bugs which go away with extra logging.
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
k_thread_cancel() is replaced with k_thread_abort() because
k_thread_cancel() is used to cancel threads that have not started yet.
Canceling asynchronous thread was returning an error.
Signed-off-by: Michał Kruszewski <michal.kruszewski@nordicsemi.no>
- replaced test points with ztest APIs wherever possible
- replaced CONFIG_MAIN_STACK_SIZE with CONFIG_ZTEST_STACKSIZE
in the config file
- split the main file into two files:
- main.c has ztest entry and runs separate functions for ztest
- sha256.c has the original routines
JIRA: ZEP-2449
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
- replaced CONFIG_MAIN_STACK_SIZE with CONFIG_ZTEST_STACKSIZE
in the config file
- split the main file into two files:
- main.c has ztest entry and runs separate functions for ztest
- mbedtls.c has the original routines
JIRA: ZEP-2449
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
- replaced test points with ztest APIs wherever possible
- replaced CONFIG_MAIN_STACK_SIZE with CONFIG_ZTEST_STACKSIZE
in the config file
- split the main file into two files:
- main.c has ztest entry and runs separate functions for ztest
- hmac_prng.c has the original routines
JIRA: ZEP-2449
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
- replaced test points with ztest APIs wherever possible
- replaced CONFIG_MAIN_STACK_SIZE with CONFIG_ZTEST_STACKSIZE
in the config file
- split the main file into two files:
- main.c has ztest entry and runs separate functions for ztest
- hmac.c has the original routines
JIRA: ZEP-2449
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
- replaced test points with ztest APIs wherever possible
- replaced CONFIG_MAIN_STACK_SIZE with CONFIG_ZTEST_STACKSIZE
in the config file
- split the main file into two files:
- main.c has ztest entry and runs separate functions for ztest
- ecc_dsa.c has the original routines
JIRA: ZEP-2449
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
- replaced test points with ztest APIs wherever possible
- replaced CONFIG_MAIN_STACK_SIZE with CONFIG_ZTEST_STACKSIZE
in the config file
- split the main file into two files:
- main.c has ztest entry and runs separate functions for ztest
- ecc_dh.c has the original routines
JIRA: ZEP-2449
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
- replaced test points with ztest APIs wherever possible
- replaced CONFIG_MAIN_STACK_SIZE with CONFIG_ZTEST_STACKSIZE
in the config file
- split the main file into two files:
- main.c has ztest entry and runs separate functions for ztest
- ctr_prng.c has the original routines
JIRA: ZEP-2449
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
- replaced test points with ztest APIs wherever possible
- split the main file into two files:
- main.c has ztest entry and runs separate functions for ztest
- ctr_mode.c has the original routines
JIRA: ZEP-2449
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
- replaced test points with ztest APIs wherever possible
- split the main file into two files:
- main.c has ztest entry and runs separate functions for ztest
- cmac_mode.c has the original routines
JIRA: ZEP-2449
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
- replaced test points with ztest APIs wherever possible
- split the main file into two files:
- main.c has ztest entry and runs separate functions for ztest
- ccm_mode.c has the original routines
JIRA: ZEP-2449
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
- replaced test points with ztest APIs wherever possible
- split the main file into two files:
- main.c has ztest entry and runs separate functions for ztest
- cbc_mode.c has the original routines
JIRA: ZEP-2449
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
- replaced test points with ztest APIs wherever possible
- replaced CONFIG_MAIN_STACK_SIZE with CONFIG_ZTEST_STACKSIZE
in the config file
- split the main file into two files:
- main.c has ztest entry and runs separate functions for ztest
- aes.c has the original routines
JIRA: ZEP-2449
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
- replaced a test point with ztest API
- separated the main file into two:
- main.c, which has ztest entry
- xip.c, which has the original routine
JIRA: ZEP-2382
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
- added a ztest test point
- separated the main file into two files:
- main.c, which has ztest entry
- multilib.c, which has the original routine
JIRA: ZEP-2382
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
- file already had ztest functions
- separated the main file into two:
- main.c, which has the ztest entry
- libraries.c, which has the original routines
JIRA: ZEP-2382
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
- file does not use ztest asserts
- separated the main file into two files:
- main.c, which has ztest entry
- arm_runtime_nmi.c, which has the original routine
JIRA: ZEP-2382
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
- file already had ztest functions
- separated the main file into two:
- main.c, which has the ztest entry
- arm_irq_vector_table.c, which has the original routines
JIRA: ZEP-2382
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
This enables IPSP node role which requires IPSS GATT service to be
registered.
Jira: ZEP-2451
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
As luck would have it, the TSS for the main IA task has
all the information we need, populate an exception stack
frame with it.
The double-fault handler just stashes data and makes the main
hardware thread runnable again, and processing of the
exception continues from there.
We check the first byte before the faulting ESP value to see
if the stack pointer had run up to a non-present page, a sign
that this is a stack overflow and not a double fault for
some other reason.
Stack overflows in kernel mode are now recoverable for non-
essential threads, with the caveat that we hope we weren't in
a critical section updating kernel data structures when it
happened.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Historically, stacks were just character buffers and could be treated
as such if the user wanted to look inside the stack data, and also
declared as an array of the desired stack size.
This is no longer the case. Certain architectures will create a memory
region much larger to account for MPU/MMU guard pages. Unfortunately,
the kernel interfaces treat both the declared stack, and the valid
stack buffer within it as the same char * data type, even though these
absolutely cannot be used interchangeably.
We introduce an opaque k_thread_stack_t which gets instantiated by
K_THREAD_STACK_DECLARE(), this is no longer treated by the compiler
as a character pointer, even though it really is.
To access the real stack buffer within, the result of
K_THREAD_STACK_BUFFER() can be used, which will return a char * type.
This should catch a bunch of programming mistakes at build time:
- Declaring a character array outside of K_THREAD_STACK_DECLARE() and
passing it to K_THREAD_CREATE
- Directly examining the stack created by K_THREAD_STACK_DECLARE()
which is not actually the memory desired and may trigger a CPU
exception
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
These tests have been copied over from TinyCrypt and modified slightly
so that they compile on a non-POSIX system, with a minimal C library:
that's why it doesn't comply with Zephyr's coding style.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This sensor was made dependent on certain boards, so building it with
all boards fails now. Disable until proper fix exists.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use net app API since we want to enable MQTT with TLS.
mqtt_connect() and mqtt_close() are added to build and close the
connection to the broker. The caller doesn't need to deal with
the net context anymore and the most of network setup code in
mqtt_publisher is removed.
Signed-off-by: Aska Wu <aska.wu@linaro.org>
Change the common "init with 0" + "give" idiom to "init with 1". This
won't change the behavior or performance, but should decrease the size
ever so slightly.
This change has been performed mechanically with the following
Coccinelle script:
@@
expression SEM;
expression LIMIT;
expression TIMEOUT;
@@
- k_sem_init(SEM, 0, LIMIT);
- k_sem_give(SEM);
+ k_sem_init(SEM, 1, LIMIT);
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
When an app uses a construct such as:
obj-y = main.o ../../../../samples/bluetooth/gatt/hrs.o
in its makefile, it causes said object module to be built in the
source tree, not in the object tree.
When building massively parallel, this usually resuls on the files
getting corrupted, leading to bugs such as:
https://jira.zephyrproject.org/browse/ZEP-2316https://jira.zephyrproject.org/browse/ZEP-2317
src/../../../../samples/bluetooth/gatt/.gap.o.cmd:3: warning: NUL character seen; rest of line ignored
src/../../../../samples/bluetooth/gatt/.gap.o.cmd:4: warning: NUL character seen; rest of line ignored
src/../../../../samples/bluetooth/gatt/.gap.o.cmd:5: *** missing separator. Stop.
as multiple build are trying to touch the same file in the source tree
and of course, race and causes a build bug.
We have known about this issue for a long time, but it requires
modifications in the build system that there is no time to tackle.
A suggested workaround is to include the source files into a local .c
file, so this is what this patch does, to remove the random noise.
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
This is a configuration that is unrealistic and used only to verify
Kconfig dependencies, trying to build this for every board fails due to
size limitations and due to unavailable device support on some of those
boards, building for qemu targets should be good enough.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In many networking tests we had to configure SLIP in the prj.conf
leaving those configurations Qemu specific. This change enables SLIP for
QEMU targets automatically and allows reuse of prj.conf for multiple
boards.
Additionally, the TUN options is removed. This option was not used
anywhere.
To enable self-contained networking tests that do not depend on SLIP, we
introduce the new option NET_TEST which disables TAP and allows testing
in QEMU without the need for a host interface.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The Imax doublings value was too large which caused overflow
of Imax_abs value, which then could cause Trickle test to fail.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The majority of these fixes adjust the memory limit needed to build the
various tests on systems with and without BLE support. We also fixup
one test case that was able to run on platforms with 16k of memory.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
A number of the network tests have minimal memory requirements that not
all boards are able to meet. Add in those memory requirements so we
don't attempt to build these tests for those platforms. Utilized the
frdm_kl25z (with 16K of memory) and cc2650_sensortag (with 20K) to test
the limits.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Show that this mechanism can detect stack overflows with the
guard page. We only do it once since are are in an alternate
IA HW task after it happens.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Instead of only running net tests in qemu_x86, enable those
tests in all suitable platforms. The tests are disabled for
bbc_microbit as that platform does not have enough memory.
The tests/net/arp and tests/net/ieee802154/l2 are disabled
for qemu_xtensa as the qemu crashed when running the tests.
For tests/net/all there was a weird build error for qemu_xtensa
so that test is also disabled for that platform.
Increased the trickle timeout to 3 secs in tests/net/trickle as
occacionally there was timeout error in qemu_cortex_m3 when the
test was run.
Jira: ZEP-2398
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add an initial implementation for the Bluetooth Mesh Profile
Specification. The main code resides in subsys/bluetooth/host/mesh and
the public API can be found in include/bluetooth/mesh.h. There are a
couple of samples provided as well under samples/bluetooth and
tests/bluetooth.
The implementation covers all layers of the Bluetooth Mesh stack and
most optional features as well. The following is a list of some of
these features and the c-files where the implementation can be found:
- GATT & Advertising bearers (proxy.c & adv.c)
- Network Layer (net.c)
- Lower and Upper Transport Layers (transport.c)
- Access Layer (access.c)
- Foundation Models, Server role (health.c & cfg.c)
- Both PB-ADV and PB-GATT based provisioning (prov.c)
- Low Power Node support (lpn.c)
- Relay support (net.c)
- GATT Proxy (proxy.c)
Notable features that are *not* part of the implementation:
- Friend support (initial bits are in place in friend.c)
- Provisioner support (low-value for typical Zephyr devices)
- GATT Client (low-value for typical Zephyr devices)
Jira: ZEP-2360
Change-Id: Ic773113dbfd84878ff8cee7fe2bb948f0ace19ed
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
As there is no suffix to represent a literal as unsigned short
it is typecasted. It is fix for Jira ZEP-2156
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
According to RFC7959 page 30, "The end of a block-wise transfer is
governed by the M bits in the Block options, _not_ by exhausting the
size estimates exchanges."
Therefore, we should check the M bit instead of total size (which
is not always available, too)
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
Some README files referenced wiki articles that have been
moved to the doc area on the website.
Fixes#668
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The sequence number validator was checking the seq numbers
incorrectly. This caused some valid RST packets to be dropped
and the TCP stream to hang.
Added also a TCP test case that tests the seq validator.
Jira: ZEP-2289
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
No need to set the main stack size as the test runs just fine
without it.
Jira: ZEP-2341
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The IA32 MMU has no concept of a "no execute" flag, this is
unfortunately only implemented in x86_64.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The QEMU targets have plenty of RAM now and the current value
specified wasn't a multiple of a 4K page.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
A network stack thread was trying to use a semaphore before it was
initialized. Set it up at toplevel so it is ready to go.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Upcoming memory protection features will be placing some additional
constraints on kernel objects:
- They need to reside in memory owned by the kernel and not the
application
- Certain kernel object validation schemes will require some run-time
initialization of all kernel objects before they can be used.
Per Ben these initializer macros were never intended to be public. It is
not forbidden to use them, but doing so requires care: the memory being
initialized must reside in kernel space, and extra runtime
initialization steps may need to be peformed before they are fully
usable as kernel objects. In particular, kernel subsystems or drivers
whose objects are already in kernel memory may still need to use these
macros if they define kernel objects as members of a larger data
structure.
It is intended that application developers instead use the
K_<object>_DEFINE macros, which will automatically put the object in the
right memory and add them to a section which can be iterated over at
boot to complete initiailization.
There was no K_WORK_DEFINE() macro for creating struct k_work objects,
this is now added.
k_poll_event and k_poll_signal are intended to be instatiated from
application memory and have not been changed.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The I2C Slave Read support isn't well defined and not actually supported
by any i2c driver at this point. We can add this back when slave mode
is more thought out.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Remove NET_TCP_HDR() macro as we cannot safely access TCP header
via it if the network packet header spans over multiple net_buf
fragments.
Fixed also the TCP unit tests so that they pass correctly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove NET_UDP_HDR() macro as we cannot safely access UDP header
via it if the network packet header spans over multiple net_buf
fragments.
Fixed also the UDP unit tests so that they pass correctly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove NET_ICMP_HDR() macro as we cannot safely access ICMP header
via it if the network packet header spans over multiple net_buf
fragments.
Jira: ZEP-2306
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We fail to build this test on stm32f3_disco which has 40k of SRAM.
Bump up the min_ram requirement to 48k.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The external mbedTLS library seems to have some issues when DEBUG is
enabled, so disable this here becauase we will not change external 3rd
party code.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
CONFIG_NET_IF_UNICAST_IPV6_ADDR_COUNT should be used instead of
CONFIG_NET_IFACE_UNICAST_IPV6_ADDR_COUNT.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The worst-case maximum number of CCC entries we need is actually
MAX_CONN + MAX_PAIRED. Provide a helper define for it and use it
whenever appropriate.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The test starts the last one: after the driver and the net stack.
However, the net stack (due to DAD and else) will already try to send
some packet, resulting it giving a uninitialized semaphore. But once
properly initialized, this semaphore will end up with a non-zero count
when the test will start: thus reseting it to 0 before running the
tests.
Jira: ZEP-2319
Reported-by Andrew Boie <andrew.p.boie@intel.com>
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Build issues caused by commit fe882f407d
which missed camel case conversion of _TimestampOpen, _TimestampRead,
and _TimestampClose.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Enabled the boot_time test on ARM SoCs, set __start_time_stamp on ARM
since we don't have a free running counter similar to TSC on x86.
Also moved to printing the values out as %u to increase the range of
values.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The shell tests were limited to running on just qemu_x86 platform, we
can run them on any platform with UART_CONSOLE support so move to using
a filter.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Test whichever had Camel case defined for functions and variables have
been replaced.
Following warnings have been fixed in test cases as well.
- line over 80 characters
- Macros with flow control statements should be avoided
- Macros with complex values should be enclosed in parentheses
- break quoted strings at a space character
- do not add new typedefs
- Comparisons should place the constant on the right
side of the test
- suspect code indent for conditional statements
- Missing a blank line after declarations
- macros should not use a trailing semicolon
- Macros with multiple statements should be
enclosed in a do - while loop
- do not use C99 // comments
JIRA: ZEP-2249
Signed-off-by: Punit Vara <punit.vara@intel.com>
Where possible, replace the use of filter with newly added keywords.
This will speed things up and in some cases add more coverage due to bad
filters.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In added mode flash operation are performed in timeslice
(in radio idle time).
Kconfig for mode enabling CONFIG_SOC_FLASH_NRF5_RADIO_SYNC.
Erase and write API implementations were rewritten and preserved against
concurrent execution.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The new GATT service registration API is bt_gatt_service_register(),
which takes a bt_gatt_service object pointer.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We have many testcases doing filtering both on the architecture level
and the platform level, which is redundant. Also many testcases are
running the same test twice on the same SoC for no good reason, cleanup
the tests and cleanup the filtering.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use sizeof instead of strlen to get the correct buffer
length and initialize rx buffer with zeros before the dma
transfer.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
commit d859295be9 ("tests: protection: convert to testcase.yaml")
removed testcase.ini but did not add an equivalent testcase.yaml.
Add it.
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Add a self-protection test suite with a set of tests
to check whether one can overwrite read-only data
and text, and whether one can execute from data,
stack, or heap buffers. These tests are modeled after
a subset of the lkdtm tests in the Linux kernel.
These tests have twice caught bugs in the Zephyr NXP MPU
driver, once during initial testing/review of the code
(in its earliest forms on gerrit, reported to the original
author there) and most recently the regression introduced
by commit bacbea6e21 ("arm: nxp: mpu: Rework handling
of region descriptor 0"), which was fixed by
commit a8aa9d4f3dbbe8 ("arm: nxp: mpu: Fix region descriptor
0 attributes") after being reported.
This is intended to be a testsuite of self-protection features
rather than just a test of MPU functionality. It is envisioned
that these tests will be expanded to cover a wider range of
protection features beyond just memory protection, and the
current tests are independent of any particular enforcement
mechanism (e.g. MPU, MMU, or other).
The tests are intended to be cross-platform, and have been
built and run on both x86- and ARM-based boards. The tests
currently fail on x86-based boards, but this is an accurate
reflection of current protections and should change as MMU
support arrives.
The tests leverage the ztest framework, making them suitable
for incorporation into automated regression testing for Zephyr.
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
ztest provides a ztest_test_fail() interface to fail the currently
running test, but does not provide an equivalent ztest_test_pass().
Normally a test passes just by returning without an assertion failure
or other call to ztest_test_fail(). However, if the correct behavior
for a test is to trigger a fatal fault (as with tests/kernel/fatal or
protection or MPU tests), then we need a way for the test to pass the
currently running test before aborting the current thread.
Otherwise, ztest hangs forever in run_test() on the
k_sem_take(&test_end_signal, K_FOREVER) call. Add
a ztest_test_pass() interface and implement it for kernel and
userspace variants of ztest. This interface will be used in the
protection tests.
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
It is confusing if we print timeout error when expecting
a timeout to happen. So for timeout test, do not print
an error message as the timeout is suppose to happen.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The TCP tests had several failures because of unnecessary
Kconfig options. These are now fixed and the TCP tests are
also run automatically by CI.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The MLD (Multicast Listener Discovery) tests had a failure.
This is now fixed and the MLD tests are also run automatically by CI.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The IPv6 tests had failures and the tests did not pass
properly. These are now fixed and the tests are also
run automatically by CI.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This will prepare test cases and samples with metadata and information
that will be consumed by the sanitycheck script which will be changed to
parse YAML files instead of ini.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This initial commit adds the following:
* Handling of privacy HCI commands
* New Link Layer filter module for both whitelist and resolving list
* Advertising RPA generation with timeouts
Follow-up commits will expand the functionality.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This is unmaintained and currently has no known users. It was
added to support a Wind River project. If in the future we need it
again, we should re-introduce it with an exception-based mechanism
for catching out-of-bounds memory queries from the debugger.
The mem_safe subsystem is also removed, it is only used by the
GDB server. If its functionality is needed in the future, it
shoudl be replaced with an exception-based mechanism.
The _image_{ram, rom, text}_{start, end} linker variables have
been left in place, they will be re-purposed and expanded to
support memory protection.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Moving the net_buf_pool objects to a dedicated area lets us access
them by array offset into this area instead of directly by pointer.
This helps reduce the size of net_buf objects by 4 bytes.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The net_pkt_split() was incorrectly checking fragA pointer
even before it was allocated.
The unit test is fixed and converted to ztest.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
llvm complains about char* -> u8_t* type conversion.
tests/net/ipv6_fragment/src/main.c:645:52: warning:
passing 'char [11]' to parameter of type 'const u8_t *' (aka
'const unsigned char *') converts between pointers to integer
types with different sign [-Wpointer-sign]
bool written = net_pkt_append_all(pkt, data_len, data,
Jira: ZEP-2274
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
1. Changed _tsc_read() to k_cycles_get_32(). Thus reading the
time stamp will be agnostic of the architecutre used.
2. Changed the variable names from *_tsc to *_time_stamp.
JIRA: ZEP-1426
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Update the arm.conf to enable CONFIG_FLOAT for the float test and use a
filter on that so we only run/build the test on SoCs/boards that support
floating point hardware.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This adds bt_gatt_register_service using bt_gatt_service which contains
the attribute array that is then added to the database saving a pointer
in each and every attribute declared.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
GAP is mandatory service and now that the db can only be build
dynamically there is no reason to keep the applications registering it.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Removes CONFIG_BLUETOOTH_GATT_DYNAMIC_DB in preparation to the
introduction of bt_gatt_unregister.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The main thread was doing nothing but spawning another thread to perform
the test. Delete the alternate thread, and just do the test on the main
thread, adjusting stack size and priority as necessary.
Issue: ZEP-2236
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
On some devices, when k_cpu_idle() was called we were getting
interrupts that were not the timer interrupt. On bbc_micro
a power clock control driver interrupt was happening instead
and k_cpu_idle() was returning without the system tick advancing,
failing the test.
The clock control interrupts seem to only happen early in device
boot; moving the idle test much later lets the test pass on this
board (and likely all other NRF5 based boards).
Issue: ZEP-2257
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add tests for the newly-added JSON_OBJ_DESCR_OBJ_ARRAY. These pass.
Note that this also adds test coverage for decoding an array of
maximum length, to avoid regressing the recently-introduced fix for
this edge case.
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
- _SysFatalErrorHandler is supposed to be user-overridable.
The test case now installs its own handler to show that this
has happened properly.
- Use TC_PRINT() TC_ERROR() macros
- Since we have out own _SysFatalErrorHandler, show that
k_panic() works
- Show that _SysFatalErrorHandler gets invoked with the expected
reason code for some of the scenarios.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The hard-coded value of 10ms doesn't take the system configured
amount of ticks per second, nor does it account for an unlucky
tick advance which causes the test to fail very intermittently
in QEMU.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
When src and dst addresses are compressed based on context
information, uncompression method should verify CID bit,
SAC and DAC bits and context ID's. But it has missed some
cases which resulted in invalid uncompressed IPv6 header.
e.g. CID is set, SAC is 0 and DAC is 1 and context id's provided.
Uncompression method assumed that src address is compressed based
on context information but it is not.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Increase to 1024 to get more tests and sample running on this device
with only 8K of SRAM.
Change thread stack size in the mslab test to make it fit into this
board.
Jira: ZEP-2079
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add tests for new macro helpers that allow JSON field names to differ
from their corresponding C struct field names. These pass.
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
The error was generated by a piece of code that is
not currently being used. This piece of code was kept to measure
the overhead caused by the benchmarking code on x86.
JIRA:ZEP-2160
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
64-bit types were not being handled properly and depending on the
calling convention could result in garbage values being printed.
We still truncate these to 32-bit values, the predominant use-case
is printing timestamp delta values which generally fit in a 32-bit
value. However we are no longer printing random stuff.
Test case for printk() updated appripriately to catch this regression.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
These tests make sure that the IPv6 fragments are build correctly
when a large IPv6 packet is being sent.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove existing commands supported by CONFIG_BLUETOOTH_SHELL and make
sure all .conf select it.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Static code analysis reported some kernel APIs were used without
reading the return value. Since the benchmark doesn't need error
conditions, a simple read of the values followed by a ARG_UNUSED
is used to handle static code analysis errors.
JIRA: ZEP-2134
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
As this is a test, it's minor issue, but let's keep Coverity report
clean.
Coverity-CID: 169303
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
These files are no longer used and can be removed.
Change-Id: I781256ab93b5364346d99cd4aac488762c437151
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
This tests enables all networking features and requires lots of RAM, so
increase the available RAM to avoid failures due to not enough RAM when
building.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change reference voltage for Analog comparator to Internal reference
voltage.
Currently AIO is using External reference voltage (Reference A) and
external reference is set at 3.3V. In this usecase both reference
Voltage and AIO IP are set at 3.3V. So rising edge interrupt behaviour
will be unpredictable.
So by changing internal reference voltage to Internal (set at 1.09V)
interrupt will be generated as soon as Voltage on I/P will exceed it.
Jira: ZEP-1927
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
AIO should be supported on more platforms. Adapt
this case to make it run on more platforms.
Also keep reference voltage for comprator as internal.
Signed-off-by: Qiu Peiyang <peiyangx.qiu@intel.com>
Fixes sparse warning:
<snip>/zephyr/zephyr/misc/printk.c:50:5: warning: symbol '_char_out' was not declared. Should it be static?
Change-Id: I5af0860e9f8f827002ae9a142b5924d3de8d51b6
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
We did not check UDP or TCP checksum to be valid after receiving
the packet. Fix this so that the checksum is validated when
packet is received in connection handler. As the checksum validation
can be resource intensive, do it after we have verified that
there is a connection handler for this connection.
The checksum calculation can be turned OFF if needed, but it is
ON by default.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
A non-tickless system with 10ms granularity was occasionally
taking up to 70ms for the cancellation to be propagated back.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
It is possible to remove the forward declaration of l2cap_alloc_buf as
the recv pointer can be compared directly with chan pointer avoiding
using l2cap_ops directly.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
For all arches except ARC, enable stack sentinel and test that
some common stack violations trigger exceptions.
For ARC, use the hardware stack checking feature.
Additional testcase.ini blocks may be added to do stack bounds checking
for MMU/MPU-based stack protection schemes.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This patch amounts to a mostly complete rewrite of the k_mem_pool
allocator, which had been the source of historical complaints vs. the
one easily available in newlib. The basic design of the allocator is
unchanged (it's still a 4-way buddy allocator), but the implementation
has made different choices throughout. Major changes:
Space efficiency: The old implementation required ~2.66 bytes per
"smallest block" in overhead, plus 16 bytes per log4 "level" of the
allocation tree, plus a global tracking struct of 32 bytes and a very
surprising 12 byte overhead (in struct k_mem_block) per active
allocation on top of the returned data pointer. This new allocator
uses a simple bit array as the only per-block storage and places the
free list into the freed blocks themselves, requiring only ~1.33 bits
per smallest block, 12 bytes per level, 32 byte globally and only 4
bytes of per-allocation bookeeping. And it puts more of the generated
tree into BSS, slightly reducing binary sizes for non-trivial pool
sizes (even as the code size itself has increased a tiny bit).
IRQ safe: atomic operations on the store have been cut down to be at
most "4 bit sets and dlist operations" (i.e. a few dozen
instructions), reducing latency significantly and allowing us to lock
against interrupts cleanly from all APIs. Allocations and frees can
be done from ISRs now without limitation (well, obviously you can't
sleep, so "timeout" must be K_NO_WAIT).
Deterministic performance: there is no more "defragmentation" step
that must be manually managed. Block coalescing is done synchronously
at free time and takes constant time (strictly log4(num_levels)), as
the detection of four free "partner bits" is just a simple shift and
mask operation.
Cleaner behavior with odd sizes. The old code assumed that the
specified maximum size would be a power of four multiple of the
minimum size, making use of non-standard buffer sizes problematic.
This implementation re-aligns the sub-blocks at each level and can
handle situations wehre alignment restrictions mean fewer than 4x will
be available. If you want precise layout control, you can still
specify the sizes rigorously. It just doesn't break if you don't.
More portable: the original implementation made use of GNU assembler
macros embedded inline within C __asm__ statements. Not all
toolchains are actually backed by a GNU assembler even when the
support the GNU assembly syntax. This is pure C, albeit with some
hairy macros to expand the compile-time-computed values.
Related changes that had to be rolled into this patch for bisectability:
* The new allocator has a firm minimum block size of 8 bytes (to store
the dlist_node_t). It will "work" with smaller requested min_size
values, but obviously makes no firm promises about layout or how
many will be available. Unfortunately many of the tests were
written with very small 4-byte minimum sizes and to assume exactly
how many they could allocate. Bump the sizes to match the allocator
minimum.
* The mbox and pipes API made use of the internals of k_mem_block and
had to be ported to the new scheme. Blocks no longer store a
backpointer to the pool that allocated them (it's an integer ID in a
bitfield) , so if you want to "nullify" them you have to use the
data pointer.
* test_mbox_api had a bug were it was prematurely freeing k_mem_blocks
that it sent through the mailbox. This worked in the old allocator
because the memory wouldn't be touched when freed, but now we stuff
list pointers in there and the bug was exposed.
* Remove test_mpool_options: the options (related to defragmentation
behavior) tested no longer exist.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Updated tests conf file with coverage for new feature Kconfig
options in the Controller. This is required to catch compile/
build regression.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added because previously, Zephyr used API incompatible with Newlib
for errno handling. Even with Newlib compatibility changes, we
override the function which is defined in Zephyr SDK libc.a, so
makes sense to ensure thsi works as expected.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Currently, a queue/fifo getter chooses how long to wait for an
element. But there are scenarios when putter would know better,
there should be a way to expire getter's timeout to make it run
again. k_queue_cancel_wait() and k_fifo_cancel_wait() functions
do just that. They cause corresponding *_get() functions to return
with NULL value, as if timeout expired on getter's side (even
K_FOREVER).
This can be used to signal out of band conditions from putter to
getter, e.g. end of processing, error, configuration change, etc.
A specific event would be communicated to getter by other means
(e.g. using existing shared context structures).
Without this call, achieving the same effect would require e.g.
calling k_fifo_put() with a pointer to a special sentinal memory
structure - such structure would need to be allocated somewhere
and somehow, and getter would need to recognize it from a normal
data item. Having cancel_wait() functions offers an elegant
alternative. From this perspective, these calls can be seen as
an equivalent to e.g. k_fifo_put(fifo, NULL), except that such
call won't work in practice.
Change-Id: I47b7f690dc325a80943082bcf5345c41649e7024
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Implement the framework for LE Scan Request Received Event.
The feature is available under the Controller's advanced
features and will be selected implcitly when Bluetooth v5.0
LE Advertising Extensions feature is implemented.
Jira: ZEP-2073
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Since Controller to Host flow control is a feature that affects both
sides equally, move it to the top-level Kconfig file and consolidate its
use in both Controller and Host.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The TX and RX pool needs to be split otherwise the TX code path may
consume all buffers causing the RX thread to deadlock which will
possible deadlock the TX thread as well in case it needs more credits.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The Bluetooth Specification allows for optional Controller to Host flow
control based on the same credit-based mechanism as the Host to
Controller one. This is particularly useful in 2-chip solutions where
the Host and the Controller are connected via a physical link (UART, SPI
or similar) where the Host is sometimes required to ask the Controller
to throttle its data traffic while still making sure that relevant
events get through the line.
This implementation is based on a simple queue of pending events and
data that is populated whenever the Controller detects that the Host is
out of buffers and then emptied whenever the Host notifies the
Controller that is ready to receive data again. Events relevant to the
connections are also queued to preserve the order of arrival.
At this point the Controller ignores the connection handle sent by the
Host and treats all connections equally, and it also queues events even
for connections that have no data pending in the queue. Both this items
can be improved if necessity arises.
Note that Number of Completed Packets will still flow freely from the
Controller to the Host regardless of the pending ACL data packets, which
might lead to inconsistencies in the sequential order of certain
operations that include bi-directional data transfer.
Jira: ZEP-1735
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The files for the Arduino Due needed to be updated to use the new
configuration when the SoC moved from the atmel_sam3 directory to
the atmel_sam/sam3x directory.
Jira: ZEP-2067
Signed-off-by: Justin Watson <jwatson5@gmail.com>
This test generates a fault as part of the test,hence make the
test-suite aware of that by tagging it.
Signed-off-by: Rishi Khare <rishi.khare@intel.com>
There're (at least) 2 UART TX interrupt causes: "tx fifo has more
room" and "transmission of tx fifo complete". Zephyr API has only
one function to enable TX interrupts, uart_irq_tx_enable(), so it's
fair to assume it enables interrupt for both conditions. But then
immediately after enabling TX IRQ, it will be fired with "tx fifo
has more room" cause. If ISR doesn't do anything to fill FIFO, on
some architectures, immediately after return from ISR, it will be
fired again (with no instruction progress in the main application
thread). That's exactly the situation with this test, and on ARM,
it leads to inifnite IRQ loop.
So, instead move call to uart_fifo_fill() inside ISR, and be sure
to disable TX IRQ after we transmitted enough characters.
Change-Id: Ibbd05acf96b01fdb128f08054819fd104d6dfae8
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
If the channel is already in use don't attempt to connect it a second
time.
Change-Id: I87bdaeadbe866b59c1a7975002699d9ef7a90c61
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
CC3220SF_LAUNCHXL effectively replaces the CC3200_LAUNCHXL,
with support for the CC3220SF SoC, which is an update for
the CC3200 SoC.
This is supported by the Texas Instruments CC3220 SDK.
Jira: ZEP-1958
Change-Id: I2484d3ee87b7f909c783597d95128f2b45db36f2
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
For stream-based protocols (TCP), adding less data than requested
("short write") is generally not a problem - the rest of data can
be sent in the next packet. So, make net_pkt_append() return length
of written data instead of just bool flag, which makes it closer
to the behavior of POSIX send()/write() calls.
There're many users of older net_pkt_append() in the codebase
however, so net_pkt_append_all() convenience function is added which
keeps returning a boolean flag. All current users were converted to
this function, except for two:
samples/net/http_server/src/ssl_utils.c
samples/net/mbedtls_sslclient/src/tcp.c
Both are related to TLS and implement mbedTLS "tx callback", which
follows POSIX short-write semantics. Both cases also had a code to
workaround previous boolean-only behavior of net_pkt_append() - after
calling it, they measured length of the actual data added (but only
in case of successful return of net_pkt_append(), so that didn't
really help). So, these 2 cases are already improved.
Jira: ZEP-1984
Change-Id: Ibaf7c029b15e91b516d73dab3612eed190ee982b
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
In tickless kernel mode, time parameter of _sys_soc_suspend is in
milliseconds. Based on the kernel mode use the correct
mulitplier to convert to seconds.
Jira:1821
Change-Id: Idf156f56ece79a82729ebb124d1552a5eeb69e25
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Adds changes to enable existing kernel and timer tests and samples to
be used to test the tickless kernel feature.
Updated samples/philosophers and tests/kernel/timer/timer_api apps
Run the tests using following commands
make pristine && make BOARD=<board> CONF_FILE=prj_tickless.conf qemu
Board could be any of the following
qemu_x86
quark_se_c1000_devboard
Jira: ZEP-339 ZEP-1812
Change-Id: I1530b19b79ddeb0e2181594caf15f3ac28ff51f4
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Historically, space for struct k_thread was always carved out of the
thread's stack region. However, we want more control on where this data
will reside; in memory protection scenarios the stack may only be used
for actual stack data and nothing else.
On some platforms (particularly ARM), including kernel_arch_data.h from
the toplevel kernel.h exposes intractable circular dependency issues.
We create a new per-arch header "kernel_arch_thread.h" with very limited
scope; it only defines the three data structures necessary to instantiate
the arch-specific bits of a struct k_thread.
Change-Id: I3a55b4ed4270512e58cf671f327bb033ad7f4a4f
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We want to show that if a non-essential thread gets a fatal exception,
that thread gets aborted but the rest of the system works properly.
We also test that k_oops() does the same.
Issue: ZEP-2052
Change-Id: I0f88bcae865bf12bb91bb55e50e8ac9721672434
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We reserve a specific vector in the IDT to trigger when we want to
enter a fatal exception state from software.
Disabled for drivers/build_all tests as we were up to the ROM limit
on Quark D2000.
Issue: ZEP-843
Change-Id: I4de7f025fba0691d07bcc3b3f0925973834496a0
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types.
Jira: ZEP-2051
Change-Id: I6c676bc6c5e850a8725785554cd535e32067f33e
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types.
Jira: ZEP-2051
Change-Id: I4ec03eb2183d59ef86ea2c20d956e5d272656837
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Only 2 attributes lacked this prefix, which makes sense to have, so
applying it accordingly and changing the helpers as well.
Change-Id: I095b2729f977f8fb1624eff8801a4a4e21416693
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Most of these macros are not exactly exposing a buffer, but a specific
header pointer (ipv6, ivp4, ethernet and so on), so it relevant to
rename them accordingly.
Change-Id: I66e32f7c3f2bc75994befb28d823e24299a53f5c
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
- net_pkt becomes a stand-alone structure with network packet meta
information.
- network packet data is still managed through net_buf, mostly named
'frag'.
- net_pkt memory management is done through k_mem_slab
- function got introduced or relevantly renamed to target eithe net_pkt
or net_buf fragments.
- net_buf's sent_list ends up in net_pkt now, and thus helps to save
memory when TCP is enabled.
Change-Id: Ibd5c17df4f75891dec79db723a4c9fc704eb843d
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There have been long lasting confusion between net_buf and net_nbuf.
While the first is actually a buffer, the second one is not. It's a
network buffer descriptor. More precisely it provides meta data about a
network packet, and holds the chain of buffer fragments made of net_buf.
Thus renaming net_nbuf to net_pkt and all names around it as well
(function, Kconfig option, ..).
Though net_pkt if the new name, it still inherit its logic from net_buf.
'
This patch is the first of a serie that will separate completely net_pkt
from net_buf.
Change-Id: Iecb32d2a0d8f4647692e5328e54b5c35454194cd
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is a start to move away from the C99 {u}int{8,16,32,64}_t types to
Zephyr defined u{8,16,32,64}_t and s{8,16,32,64}_t. This allows Zephyr
to define the sized types in a consistent manor across all the
architectures we support and not conflict with what various compilers
and libc might do with regards to the C99 types.
We introduce <zephyr/types.h> as part of this and have it include
<stdint.h> for now until we transition all the code away from the C99
types.
We go with u{8,16,32,64}_t and s{8,16,32,64}_t as there are some
existing variables defined u8 & u16 as well as to be consistent with
Zephyr naming conventions.
Jira: ZEP-2051
Change-Id: I451fed0623b029d65866622e478225dfab2c0ca8
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Because of the way we build we can't expect relative paths back into the
Zephyr code base to work properlly. This just happens to work on some
systems because of the various -I that exist and one hits the right
number of subdirs between it and where the "at.h" lives. Lets instead
add the Zephyr root as a include path and explicit do a relative path
from the root to get the header.
We end up with a build failure with newlib enabled on galileo because it
ends up not having an include path that gets us to the proper spot with
the various ../../.. ...
Change-Id: I48b4dc2dffb76314f380efbcbbe25957ff5e9e07
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Tickless test dependency on legacy API is resolved, Changing
test directory from tests/legacy/kernel/test_tickless to
tests/kernel/test_tickless/.
Jira: ZEP-2008
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
Change-Id: I0b53ae6eff3a915d988d3234592eb5f8b425b371
As part of Zephyr release 1.9 some APIs will be depreciated. This patch
replaces two of such APIs (task_sleep(ticks), sys_tick_get_32()) with
new ones (k_sleep(ms), k_uptime_get_32()).
Jira: ZEP-2008
Change-Id: Ic0e05906dadfb2ddaea9d0a8b738294dc81430f9
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
As test_sleep does not have dependency over legacy APIs.
So moving files from tests/legacy/kernel to tests/kernel.
Jira: ZEP-2009
Change-Id: I2439391ba6d0a194d07a0d1b48911d37b2f493b0
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
As part of Zephyr Release 1.9 some APIs will be depreciated.
This patch replaces APIs related to semophore init, kernel sleep,
task spawn etc.
Jira: ZEP-2009
Change-Id: I1fe09e9592f503c3413d51857fd740703173c042
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
Added test cases to verify tickless idle concepts defined in
https://www.zephyrproject.org/doc/subsystems/power_management.html#tickless-idle
Test points:
verify system clock recovery after exiting tickless idle;
verify slicing scheduler behaves as expected
Jira: ZEP-339
Change-Id: Ic0a86d725e9692aa217375cedc7396372a026a88
Signed-off-by: Sharron LIU <sharron.liu@intel.com>
newlib doesn't implement the internal buffer the same way that minimal
libc does, so only run that check with min libc (ie !CONFIG_NEWLIB_LIBC).
Also, reported the length we did get if the buffer is to big. Finally
include <stdarg.h> since we are dealing with va_lists and such.
Change-Id: I6b23e448e5785df978ac8c2757099e2b8aaace54
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We need a bit over 32k of memory to build/run the app_kernel benchmarks.
Change-Id: Iddfeb073f8ea87dc6323775a288b83efa88fdaea
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We renamed ztest's assert to zassert and the crc test case wasn't
updated to match so it doesn't build.
Change-Id: I67cd5bb6eef0875f31b8825d5c3aa5e1fa46af04
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
ztest has a number of assert style macros and used a baseline assert()
that varies from the system definition of assert() so lets rename
everything as zassert to be clear.
Change-Id: I7f176b3bae94d1045054d665be8b5bda947e5bb0
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The directive exists for platforms that require more stack space than
usual. However, it wasn't being applied to the ztest thread stack
which ztest-enabled cases are run on.
Fixes numerous failures on xtensa simulator targets.
Change-Id: Iafa84de002421f03729c0f0cdeefdea51842ae32
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
A recent patch added some new tests here. Unfortunately,
the current stack size value of 512 was too small for Xtensa.
Increase it to 1024.
Change-Id: I16c52b74412cbd7665e774ce3baed260885ddb9b
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
A recent patch pinned the stack size for this test at 1024
instead of the platform default. This value wasn't sufficient
on Xtensa. Set to 2048, which was the default on most platforms.
Change-Id: I9a9d5fd448d2377aaf782c2c093a16147f31886a
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This creates a test case that enables all the currently known
network related Kconfig options. This is useful so that we can
compile test various Kconfig options. Note that the result binary
is not meant to be run anywhere and it will probably not run as
some of the enabled options do not make sense in real life.
Change-Id: Iede36131b43d95acb78b4094004626e1b86e0f95
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Since commit-id 1ab40390c9 arp_input()
unrefs the buffer on success (NET_OK) so no need to do it afterward.
Change-Id: I84ab7e8eb07f50d52b329e4c025d88753a5de4db
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The Kconfig.rpl file was missing option to actually collect
RPL statistics. Unified the config option name to be
CONFIG_NET_STATISTICS_RPL as there was two conflicting settings
in the code and both of them were missing from Kconfig file.
Change-Id: I4ce4fcbaa317b36cac315ea3b3f710fa7a344b25
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add two testcases for mqtt_publisher and mqtt_subscriber.
The combination of the two, covering most of the MQTT APIs.
Change-Id: Ib663ee1f550362ca493501046ddf8508a25ac956
Signed-off-by: Wu Jiequan <jiequanx.wu@intel.com>
Ensure that the CRC16 functions compute a few test values properly.
Change-Id: Ie98049aefac8a330b9b81d3bf333deb09bc35c39
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Add net_nbuf_split() function that can be used to split
an existing net_buf fragment into two arbitrary length pieces,
and return the two new fragments to the caller. The data from
the original fragment is copied into these two new fragments.
Existing fragment is not modified.
Change-Id: I463e675232c6e19c2a42929f480893a6d1265873
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Incorrectly use variable even if it is null.
Coverity-CID: 157593
Change-Id: I883421a16870e5fe3c1d81e461f55f912ea168c0
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
TC_START was missing from some tests. For this reason automated testing
parsing wasn't unified for all tests. This patch fixes the issue and adds
TC_START to tests where it was missing.
Change-Id: I7e27a3fd8eaef9c3d0b0e0aeba9bca5b97eb0c58
Signed-off-by: Milosz Wasilewski <milosz.wasilewski@linaro.org>
This test takes a bit longe than specified and fails on a daily basis
due to the low timeout specified.
Change-Id: Id774c35cb1b0d0dcc5455e4121a8e9e1612baafd
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Tinycrypt 0.2.6 fixed the issue with the definition of 'bool'.
Issue: ZEP-1722
Change-Id: Ie470e25dfe02a58d9c3f2324cab85bc02f574b51
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
it covers the story "Port AES-CMAC-PRF-128 [RFC 4615]
encryption library for Thread support"
ZEP-734
Change-Id: I6213309b51da435060c3e3cfadde67e21a927b2b
Signed-off-by: ethan gao <ethan.gao@intel.com>
Deleted the instance of app_kernel in tests/legacy/benchmark.
JIRA: ZEP-1980
Change-Id: I5a6e073d9b0c870be0cc7d8ae5bb352b11d7f97e
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
The BR/EDR configuration doesn't fit e.g. the Arduino 101 anymore.
Limit it to Qemu for the time being, which is anyway the primary
target where the functionality is being tested.
Change-Id: I9a34c82157d56079e43acabe29eeadd6d99e03fe
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
tests/kernel/context:
added test point to cover k_cpu_atomic_idle.
Jira: ZEP-1242
Change-Id: Id09c89fd367d527ea1087e6eb2bdba29a338ceaf
Signed-off-by: Sharron LIU <sharron.liu@intel.com>
Coverity points out that uart_irq_update() return value
should be checked.
Coverity-CID: 166776
Change-Id: I3a754dae9e8f1563f4879e2fadfd89621785de8f
Signed-off-by: Qiu Peiyang <peiyangx.qiu@intel.com>
tests/kernel/common:
added test case to cover kernel clocks service.
https://www.zephyrproject.org/doc/kernel/timing/clocks.html
Jira: ZEP-1242
Change-Id: I40a06dd9d4dcb1ed24d488088eb2e456740c3bad
Signed-off-by: Sharron LIU <sharron.liu@intel.com>
Add a configuration that strips the BLE controller down to its simplest
form to catch any issues when commonly used options are not enabled.
Change-Id: Ifbec01d62b7d45fe9139dadaba734eff3b7a72b6
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Implement the controller's ability to drop duplicate advertising reports
when instructed by the Host.
Jira: ZEP-1246
Change-Id: I2d1b7abf1ed950dde705e5df30a858c595f3834c
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add Controller advanced Kconfig options to select IRQ
priorities of the Radio, Ticker's Worker and JOB IRQs.
This will provide an opportunity to have peripheral IRQ's
of higher level than Bluetooth Controller.
Change-id: Iaa128c1cd64a309a77d42d485fdefe68f31e4895
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Add Kconfig option to enable advanced scheduling in the
controller.
Enable non-overlapping placement of observer, initiator and
master roles in timespace. Uses window offset in connection
updates and uses connection parameter request in slave role
to negotiate non-overlapping placement with active master
roles to avoid slave roles drifting into active master
roles in the local controller.
This feature maximizes the average data transmission amongst
active concurrent master and slave connections while other
observer, initiator, master or slave roles are active in the
local controller.
Disabling this feature will lead to overlapping role in
timespace leading to skipped events amongst active roles.
Change-id: I16e4e6c3ca99f93987ab86924af0cb9d76bdbc7e
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Added Kconfig option to enable advanced event preparation
feature.
Enables advanced event preparation offset ahead of radio
tx/rx, taking into account predictive processing time
requirements in preparation to the event, like control
procedure handling and CPU execution speeds. Crystal
oscillator is retained between closely spaced consecutive
radio events to reduce the overall number of crystal
settling current consumptions.
This feature maximizes radio utilization in an average role
event timeslice when they are closely spaced by using a
reduced offset between preparation and radio event.
By disabling this feature, the controller will use a
constant offset between the preparation and radio event. The
controller will toggle crystal oscillator between two
closely spaced radio events leading to higher average
current due to increased number of crystal settling current
consumptions.
Change-id: I19e640f7395ac7938873ef4bfac38acf8d6f7e0e
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
If user is trying to use ztest by including ztest.h but has
not defined CONFIG_ZTEST, then fail the compilation as the
result binary will not do anything.
There is no check for CONFIG_ZTEST for unit tests that are run
without qemu.
Change-Id: Ief9bba3a3a0f6acc6a264f17cde828b6d7e543a5
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The test failed to initilise these to known states, so fix this by
asking for end of transfer and error callbacks.
Change-Id: I523168381329062ec0c17aa41cb4033b78d8ed99
Signed-off-by: Jon Medhurst <tixy@linaro.org>
These were flagged by icx build.
Jira: ZEP-1887
Change-Id: Iaeedb13be23e86ebfb29a6441574b7384ae836e1
Signed-off-by: Qiu Peiyang <peiyangx.qiu@intel.com>
It needs to check if current event matches:
- cb's layer
- cb's layer code
- cb's command
If none match, it will not raise the event.
Fixing the unit test as layer must be always != 0.
Jira: ZEP-1940
Change-Id: Iadd63e751fa6e534a10e7da9cae0f5bb5a384461
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Most (if not all) 802.15.4 devices can handle ACK replies by
themselves.
Change-Id: I0319d59de767b20eb67c1592bacaa4a7b7015cad
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
commit id 7a11439020 changed this.
Hopefully that changed did not affect anything.
Reducing minimal frame length and applying the change everywhere where
relevant.
Change-Id: I5ae203751bfcf70cef833620106d2c2d0e33b7a5
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It will first run the datasheet example.
Change-Id: Ic4da5ba9170a253cfdff4b17010d72dc86376555
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The neighbor was added very fragile way into neighbor cache which
caused following queries to fail. This is now fixed by manually
adding neighbor to the cache.
Change-Id: I1831557fd5f9df5afd0a6c6833b0af769f5167eb
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Couple of tests started to fail without any apparent reason.
Disabling them temporarily until the root cause is found.
Change-Id: Id82e0eab60dc744c8ce6f02a5834e731be153883
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The ECC DSA test case was updated in TinyCrypt 0.2.6.
Fix the length of the random vector.
Change-Id: I7545a51c6855959afdefe00a1e0b53e5c3001a7c
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
The ECC DH test case was updated in TinyCrypt 0.2.6.
This patch adds two helper arrays for the Monte Carlo routine.
Change-Id: If28292512b351feffc3fe470942cd97b18851a57
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This adds a test suite for the JSON library, testing both encoding and
decoding of all supported data types, including arrays, nested objects,
and basic types such as booleans, numbers, and strings.
Jira: ZEP-1607
Change-Id: I4f6ad7e2859a142e06d405e0760e91751e01a31f
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
This way we can monitor testcases for faults that should not be there;
however, in the case of these, a fault message is expected and shall
be ignored.
Change-Id: I63736723026c381c9fee7f24a751ceafc12f2a40
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Legacy APIs are to be deprecated, so getting rid of tests that have been
moved to unified kernel already.
Change-Id: I752e42bc498dfdd0ea29b0b5b7b9da1dac7b1136
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Refining the names around IPv6's neighbor states to differentiate them
easily from any net_nbr related names (which are not tighten to IPv6).
Change-Id: Ibc24df2a9485477a53fe5fe1c8f993f0fcd91635
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This fixes an issue introduced by bab3aafa2d,
which changed the default value of UART_PIPE_ON_DEV_NAME to the same
used by BLUETOOTH_UART_ON_DEV_NAME. Due to this, the BTP and HCI were using
the same UART.
Change-Id: Ib59819e49610f28f4c89c0304d024bb1b6aa506a
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This is the port of the legacy/kernel/test_pend test case to
the unified kernel
Jira: ZEP-932
Change-Id: I81762b45ff7000ff9f6079c674b46d233b2645de
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Added conn-update command to btshell module to test
bt_conn_le_param_update Bluetooth API.
Change-id: I205df9ffc12a0ab062de5a779ab96bc91cbd9259
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Reordered the commands in btshell to represent the logical
order of use. Moved advertise and scan before connect
command.
Change-id: Id64509e39848109a6df7ddb1306b6bd221b65c40
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Add proper logging for errors in the same go.
Change-Id: I8bd4fa8d5b143e51024496bfba0056525ad35964
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Declaring these as const lets the linker generate more optimal code.
Some extra care is needed with hci_ecc.c since it was overwriting the
send callback. Now the choice of send() call is done directly in the
bt_send() function
Change-Id: Iac74f5ee9bee097bbb34c11bd13d1d886700f5cc
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add a Controller event that indicates everytime
advertisement event has been transmitted on air.
Change-id: I4722488bbfeca987e66983faf5b26467407a89c9
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Due to commit 8308b9bd2d ("net/http: Add the HTTP/1.1 API")
every user of CONFIG_HTTP_PARSER would need to add CONFIG_HTTP to
their .conf files. Which is fine for intree samples/tests as they
have been adjusted, but the rest of world working on Zephyr apps
will need to make this changes as well.
Instead, we should have each of the following select HTTP instead of
depend on it, which will make future use of these configs and their
dependencies more intuitive:
HTTP_SERVER
HTTP_CLIENT
HTTP_PARSER
NOTE: As cleanup, this commit also removes the CONFIG_HTTP added to
samples and test .conf files.
Change-Id: I81cfaa19e37333b1bf98778f8147814780e7f77c
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Add CONFIG_NET_IPV6_NBR_CACHE option that is the base for both
neighbor discovery (ND) and duplicate address detection (DAD).
Both ND and DAD can be disabled if needed. If NBR cache is
disabled, then ND and DAD are disabled too.
Note that it makes not much sense to disable DAD or NBR cache
as IPv6 will not work properly without them. It is possible
to disable ND but then the neighbor information needs to come
via other sources like RPL.
Change-Id: I57c8668ad828b3a153dfc58eea78bf5f7ac3938a
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use the proper MAC address space (00-00-5E-00-53-xx) dedicated
for documentation and specified in RFC 7042 ch 2.1.2.
Change-Id: If8ef9e4ee4e041ad005060664ebafe60df0a6bf9
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Test net_mgmt_event_wait() and net_mgmt_event_wait_on_iface()
Change-Id: I82ba70a697f0d13aa2e1eef2110e139b3621c119
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Instead of creating a handler and a related callback structure on an
event_mask: net_mgmt_event_wait() can be used to wait synchronously on
such event_mask. The core mgmt part will seamlessly reuse the struct
net_mgmt_event_callback so the whole internal notification mechanism is
using the same code.
Change-Id: I426d782c770e75e5222aa3c5b703172b1f1f2e5e
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Current finalize api's takes buf as input parameter and returns
the finalized buf. But if there are any issue while finalizing,
it failed to throw an error.
Change-Id: I6db54b7453eec41a8051fab50d5c0dc937debd54
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
As per RFC 6775 4.2, context length holds number of leading bits
in the Context Prefix field that are valid. Rest are not valid
for compression.
Change-Id: Id21cc2d7a5d42980cf9295f85e75c4869ff6cb99
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This patch adds some routines to evaluate DNS responses as specified
by RFC 1035.
Jira: ZEP-1876
Change-Id: Ia78a1175229962128a0bcee985e507d72ed26aea
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This patch adds the HTTP/1.1 API for Zephyr. This API consists of client
and server context structures enabled via Kconfig variables.
HTTP parser support is enabled via the CONFIG_HTTP_PARSER configuration
variable.
Currently, this API only includes support for writing HTTP requests
(client mode) and HTTP responses (server mode). TLS support is not
considered in this iteration.
Supported HTTP methods:
GET, HEAD, OPTIONS and POST.
Supported HTTP responses:
400, 403 404. The http_response routine may be used to write
any HTTP status code, for example 200 OK.
Jira: ZEP-1701
Change-Id: Ic9ccd4d4578d6d0f3a439976ea332b031644ca7d
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This patch adds the test case for the DNS API low-level routines.
The following routines are evaluated by this test case:
- dns_msg_pack_qname
- dns_msg_pack_query
- dns_unpack_header_id
- dns_header_qr
- dns_header_opcode
- dns_header_aa
- dns_header_tc
- dns_header_rd
- dns_header_ra
- dns_header_z
- dns_header_rcode
- dns_header_qdcount
- dns_header_ancount
- dns_header_nscount
- dns_header_arcount
- dns_unpack_query_qclass
- dns_unpack_query_qtype
Next iterations will consider IPv6 and DNS RR coverage.
Jira: ZEP-1499
Change-Id: I4ef46203e6fec57c6fe5a5db8132ed140b412fc2
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Make sure that the network interface has proper allnodes and
solicit node multicast addresses set.
Change-Id: I2318d63df0b5d09dfaa8347b69c843b84ed63f4b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add tests for verifying that we can receive Multicast Listener
Discovery query and act on it.
Change-Id: I926cf5e9f77cd250d2d7094f2379e320ef163540
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we receive MLDv2 (Multicast Listener Discover) query,
we send out information about the multicast groups that
we have joined.
Change-Id: If4ea9fa685319b2ad900e1949a5cbe12e7696b43
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
MLD (Multicast Listerer Discovery) unit tests when joining
or leaving an IPv6 multicast group.
Change-Id: I7cd0f4c5f31c693d816fb5d27d3d23bb27679c35
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When we setup the network interface, add predefined IPv6 multicast
groups into the network interface. When interface is taken down,
then leave all the multicast groups that joined.
See RFC 4291 ch 2.8 for details.
Change-Id: If17d3e8c75157a02aa93c92e2fb499619c1484cf
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This and subsequent commits adds API to join or leave
an IPv6 multicast group.
Jira: ZEP-1673
Change-Id: I26dcfe16a4527dbf7886a30827a5d4ebfdeaac01
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Variable len is not used in net_icmpv6_input() and if required
it can be obtained from 'buf'.
Change-Id: I4b0710e1cf16cff9837173ad9d6908ec54ebafae
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Instead of always calling net_nbuf_get_reserve_tx() with zero
ll_reserve (first parameter) and then setting the link layer
reserve separately, pass the reserve to that function which can
then set the ll_reserve in buf itself.
Change-Id: I21c14cb7e2e6c36d170c09998bca0207ecf65c75
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The ll_reserve parameter is useless in net_ipv{4|6}_create_raw()
function as the reserve information is already stored in buf.
Change-Id: I7815a78c001e3da532478c04b3dac9b37bbc723c
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The code used net_nbuf_get_reserve_{rx|tx}_data() function to
allocate a fragment. Instead of that low level function, use
net_nbuf_get_frag() instead. There are few places this is not
possible or is too big change like in few test programs.
Change-Id: Ied7e2b7db352de998b200ffa6ff82471bfa5ebe3
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we receive lot of packets, it might happen that we exhaust
all the DATA buffers in the system. This would prevent from
us sending anything to the network.
Change this by splitting the DATA buffer pool into RX and TX
parts. This way RX flooding cannot consume all DATA buffers
that needs to be sent.
Change-Id: I8e8934c6d5fdd47b579ffa6268721b5eb3d64b6d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It makes no sense to modify the original net_buf so change the
copy function not to touch the original buffer.
Change-Id: I5d22445ce50cee62994c36567f0e995a500cb89d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The first parameter of net_nbuf_copy() must be the head
of the buffer chain i.e., it must contain the user_data
part. If a fragment is given, then we do not know enough
information to allocate the data fragments.
Change-Id: I052b183d8c63d7326b320254f36f00b2fc48b0a0
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add pin definitions to enable GPIO cases to run on
Quark D2000.
Add pin definitions to enable GPIO cases to run on
arduino_101_sss.
Change-Id: I97eadb8316b1f80b899b167a01effab815626dae
Signed-off-by: Qiu Peiyang <peiyangx.qiu@intel.com>
According to ZEP-1717, removing the callback from
the gpio is not enough to disable interruptions.
You also need to call gpio_pin_configure() on
the input pin without the GPIO_INT flag to totally
disable the interrupt for the pin.
This commit will stop level interrupt from being
fired constantly.
Change-Id: I019d7cea0bc0d5e5ff4b74165472ed11de1733bb
Signed-off-by: Qiu Peiyang <peiyangx.qiu@intel.com>
These were flagged by icx build.
Jira: ZEP-1864
Change-Id: I5b8fce64d9e20d768fabf02e2a799e9390e3679a
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Separate out data element structure header into type and size fields
Change-Id: I869ee1ea82db1f6d669bb905055135b7d63f3fa2
Signed-off-by: Kaustav Dey Biswas <kaustav.d.biswas@intel.com>
Parameters and data must be permament for time of the operation.
Change-Id: Idd4eee948e62c2c80648116a339558042059f801
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Instead of passing exact value allow to use 'ind' for enabling
indications instead of notifications.
Change-Id: I24306a321ed90b4bcb6300846218ff7214b39bc4
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Don't echo data from received callback as this can cause
deadlock. Just dump incoming data instead.
Change-Id: Iedbbafd0406ad46ba2c9d26fd8a70fff59de8143
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
argc needs to be check before accessing argv.
Change-Id: I9cb70906a388b96df4e192dd4f31eafdab25127f
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Add __printf_like attribute to printf style functions in minimal libc to
enable the compiler checking this provides. We fixup the associated
issues that are now found by utilizing these checks.
Change-Id: I74ac0d0345782463d9fb454f7161d6b4af211ba5
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
It was named 'mutex', which is not representative of what it is used for
since it is not used for mutual exclusion, but rather for signaling.
Change-Id: Icfef0011f890b2546af1686ba6b57e3fc13c6576
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
There is an implicit expectation that the priority of threads spawned by
a ztest suite is still higher than the main suite thread own priority
when a test signals the main suite thread that it has completed.
Change-Id: Id7caec3e9e553712c828a93c212b8e82bd16eabd
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
That was an oversight that should not have caused any problem. However,
the test harness expects the test's thread to be higher prio than the
test suite's thread that spawns it, because the test suite reuses the
stack space for the next test, if there is one.
Change-Id: Iad951118278abf0d9c23012d78ed56b75bc2958a
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
Current users of sys_bitfield*() are bending over backwards to cast
what is most of the times a pointer into an integer.
Bitfields can be better described with an void *, so
uint{8,16,32,64}_t or any other container can be used. Most
sys_bitfield*() operations, by extension, can do the same. Note void *
has byte arithmetic, like char *.
This change will also make it implicit, for any future split of the
address space between virtual (what the SW is seeing) and physical
(what the HW is seeing) way clearer, as the functions dealing with
physical, non directly referentiable/mappeable addreses to use an
integer type, like mem_addr_t.
- include/arch/ARCH/*asm_inline*:
- sys_bitfield*() all modified to take 'void *'
Note 'void *' arihtmethic is byte based, which makes some things
easier.
- include/sys_io.h:
- introduces DEFINE_BITFIELD
- update docs
- tests/kernel/bitfield: remove all the cast contortions, use DEFINE_BITFIELD
PENDING: update other TCs
- include/arch/nios/nios2.h, drivers/interrupt_controller/ioapic_intr.c:
remove cast contortions
Change-Id: I901e62c76af46f26ff0d29cdc37099597f884511
Jira: ZEP-1347
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
tests/kernel/pipe/test_pipe_api:
added test cases to cover k_pipe_block_put.
Also added test case to verify [get, put] API sequence.
Jira: ZEP-1242
Change-Id: I755def474592ea2bf36d8644c8f4a07a7a80bad0
Signed-off-by: Sharron LIU <sharron.liu@intel.com>
tests/kernel/workq/workq_api:
added test point to cover k_delayed_work_remaining_get
Jira: ZEP-1242
Change-Id: I15055e9b11dfd28f3e33ac04151df8ccbed97027
Signed-off-by: Sharron LIU <sharron.liu@intel.com>
tests/kernel/fifo/test_fifo_api:
added test case to cover k_fifo_is_empty.
Jira: ZEP-1242
Change-Id: I9559df8661dbcd7d4885fa2db928120e945b3ae1
Signed-off-by: Sharron LIU <sharron.liu@intel.com>
tests/kernel/threads_scheduling/schedule_api:
added test case to cover k_is_preempt_thread.
Jira: ZEP-1242
Change-Id: I4327438dffaa59abcfe1e41813b45abee88506b2
Signed-off-by: Sharron LIU <sharron.liu@intel.com>
Once all users of k_lifo migrate to k_queue this should no longer be
needed.
Change-Id: Ib8af40c57bf8feba7b06d6d891cfa57b44faad42
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes k_fifo functions rely on k_queue and port k_poll to use
k_queue directly.
Once all users of k_fifo migrate to k_queue this should no longer be
needed.
Change-Id: Icf16d580f88d11b2cb89e1abd23ae314f43dbd20
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
It is possible that the buffer waiting for retransmission is modified
after it is sent, for example, it can be compacted by 6lo, and our
assumption of where is the message ID is located in the buffer is no
longer valid.
As the message ID is the only information that is necessary for
keeping track of retransmissions, we keep a copy of it in the pending
struct, as well as the destination address of the retransmission.
Change-Id: Id33d54353404628673541225a1a05e27ee08765f
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
This unit test verifies that zoap_packet_get_payload() returns the
expected size for received packets.
Jira: ZEP-1662
Change-Id: Ibe011959f4d6593f4f20f0f5901c9033c76c9518
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
This reverts commit 7b652b1f84.
Breaks on many boards.
Change-Id: Ie74e7a656094a54b999b99de9a462093525202c3
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Depending on test environment, termination character could
be '/r' instead of '/n'.
Enabling both possibilities.
Change-Id: I18b47e9055667e0a4f868416ee8d01226a879712
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
In order for interrupt reset mode to work (reset the processor
after and interrupt) the interrupt does not has to be cleared,
and the qmsi hal layer clears the interrupt after the callback
has been invoked, the callback does not return and the processor
should reset.
Jira: ZEP-1566
Change-Id: Ic951a0f15fe95fb0ef5d752b831c62e6fa3ceea0
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
The include guard has a misspelling.
Jira: ZEP-1746
Change-Id: I4d8000ef5c8e037f80acbf2491d0b9466670816a
Signed-off-by: Kuo-Lang Tseng <kuo-lang.tseng@intel.com>
This patch excludes qemu riscv32 due to the following msg:
qemu-system-riscv32: cannot set up guest memory
'riscv_sifive_board.ram': Cannot allocate memory
Jira: ZEP-1721
Change-Id: Ib1784fa57ad1e3d69871d4e216af1ad5dbe55a76
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
After QMSI 1.4 update, the alarm callback is not saved when
'alarm_en' is set to zero during RTC configuration. So this
patch fixes tests/power/multicore/lmt application according.
ZEP-1778
Change-Id: Ie1468458bc23a6394484aef2aeee97745d5d23b8
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
The interface L2 address type is set at the same time as the
L2 address is set to the network interface. This is most
convinient place to set the address type.
Change-Id: I712d7357d075959eb79df3463141cfbc6d163a74
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
k_cycle_get_32() needs to return a monotonically increasing value,
except in cases of 32-bit integer overflow. Enforce this with a
test case.
We also check that the number of cycles elapsed after sleeping for 1
second is at the expected value. This can help catch errors on platforms
that use different timer sources for the system clock and timestamps.
This test case adapted from some code provided by Sergey Arkhipov
when troubleshooting ZEP-1546.
Issue: ZEP-1546
Change-Id: If27fff026ea6de659f7b41b60ff26f4962b734d4
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Some files made it through review process with full license header.
Change-Id: I2722b127c40b4b19500042c12e4fde85a165bae9
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Some arches may want to define this as an inline function, or
define in core arch code instead of timer driver code.
Unfortunately, this means we need to remove from the footprint
tests, but this is not typically a large function.
Issue: ZEP-1546
Change-Id: Ic0d7a33507da855995838f4703d872cd613a2ca2
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
A _tsc_read has been added for ARC targets.
This test can use that when ARC.
See ZEP-1413
Change-Id: Ib63aecbe9f3eb2b97ad1086fc79b57e8f0774fca
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Timeouts, when expiring on the same tick, should be handled in the same
order they were queued.
Change-Id: I23a8e971a47ca056b32b8b48fe179d481bae27c0
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
Currently, for the following MQTT msg fields:
- client_id
- will_topic
- user_name
- topic
their length is computed inside the routine that receives the MQTT msg.
Although this simplifies development, also imposes one restriction:
data must be null-terminated. Sometimes, data is received from other
sources and not generated by the application, so the null-terminated
constraint may be considered problematic for the user.
This patch removes the assumption that string fields are null-terminated.
Current data structures are already prepared to handle this case, so no
API change is required.
Change-Id: I5a147a5b21e0da49541cbe62baac363c8737cd3e
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
So far, only implemented on ARM.
It's not possible to do this on Nios II and RISC-V.
Change-Id: I84c8d99cd163dff46de4bc4a7ae40768daf8e4ce
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
obj_tracing test from legacy modified to use unified APIs
directly.
Jira: ZEP-932
Change-Id: Ib5d300334e527b842668be076c94c40b65d7cbe4
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Remove tests that assert due to invocation from ISR which is not supported.
Change-Id: Ib2313b8f75db0140aa475281bd76ba0414d6a481
Signed-off-by: Sharron LIU <sharron.liu@intel.com>
This was reported by ISSM compiler.
Jira: ZEP-1179
Change-Id: Ib97ed8da830126c9fbfa2269c8b2327d2f1be2f4
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
This was reported by ISSM compiler.
Jira: ZEP-1179
Change-Id: I5700ff6b374815325fa858cfd11f8938c82d8337
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Tinycrypt's definition of 'bool' does not work properly with
Xtensa's XCC compiler.
Issue: ZEP-1722
Change-Id: Id71b5f1bcf738c83e672b64a592a68751758dbc9
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This option is added in order to support Xtensa, which needs more stack than
other architecture. This allows having a centralized way to change stack
requirements for all tests.
This extra stack size is eaqual to 0 for most architectures, except Xtensa
which requires additional 768 bytes for each stack.
Change-Id: Ie5dcae1dfd29018d36ef35dae22dc4c1a2ecdc14
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
The test will also need to increase the stack to run correctly for Xtensa cores.
Change-Id: If94f12a941dc8eccf879558bdebdc7ccb2d047f1
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
When test GPIO_INT_EDGE, there is no code to skip GPIO_INT_LEVEL
and jump to the end of the function. So GPIO_INT_LEVEL will
always be checked (Besides, it't always true), even if it's
testing GPIO_INT_EDGE, which will cause GPIO_INT_EDGE cases fail.
Add a goto statement for GPIO_INT_EDGE to skip GPIO_INT_LEVEL.
Jira: ZEP-1685
Change-Id: I10ce21c04c49f34aafdc2cd2f60f3e5377d6f1f5
Signed-off-by: Qiu Peiyang <peiyangx.qiu@intel.com>
This test case uses PWM0 port to test PWM on Quark Se.
However PWM0 port on Quark D2000 is initialized as tdo,
not PWM0 and disabling tdo will kill JTAG on D2000. So
use PWM1 and add PINMUX setting code to configure PIN_24
as PWM1 port, then the case will work on D2000 board.
Change-Id: Ib28d4750dac7396529388b781fb64bde048139d6
Signed-off-by: Qiu Peiyang <peiyangx.qiu@intel.com>
the commit test below adc driver api with different resolutions
and modes
adc_enable()
adc_read()
adc_disable()
move original adc test to adc_simple folder
Change-Id: I016b5e67a5d89fc8d5ae76f33799e5d3eb3e1cf8
Signed-off-by: jing wang <jing.j.wang@intel.com>
Remove tests that assert due to invocation from ISR which is not supported.
Change-Id: Idd2360847a467af6afdd9fbed8f87a620d9ed2f7
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Update the dma loop transfer sample app to use the new
dma api interfaces. This change is based on the api change
and the updated dma driver.
A RFC was posted recently on this.
Jira: ZEP-873
Change-Id: I289e2e08d4c775a833bf3d585d2706a903edd0bc
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
This test is intended to verify that the SW ISR and vector tables
have been populated correctly.
Change-Id: Ic7f50c02dc0807d7ddefa710da67f818ff707ad6
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This replaces the hard-coded vector table, as well as the
software ISR table created by the linker. Now both are generated
in build via script.
Issue: ZEP-1038, ZEP-1165
Change-Id: Ie6faaf8f7ea3a7a25ecb542f6cf7740836ad7da3
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
These were reported by ISSM compiler.
Jira: ZEP-1179
Change-Id: Ic625749309773611c0c6ba2905e9420e98947dae
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Update the dma block transfer sample app to use the new
dma api interfaces. This change is based on the api change
and the updated dma driver.
A RFC was posted recently on this.
Jira: ZEP-873
Change-Id: Icf3bec7260c2e499485b07a4a579956448a1a3fd
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Using net_buf_unref() technically works but debugging the network buffer
allocations is more difficult if done like that.
Change-Id: Ieaa0978aa69e2f0baa924fe842ca1f116c348ef1
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
this commit check the priority of 2 system threads - main and idle
Change-Id: Ie57e7fdab3d15c0b69d85ed6282bfa6aa04133b4
Signed-off-by: jing wang <jing.j.wang@intel.com>
Current API description of net_nbuf_compact() is not very clear.
The first parameter needs to be the first net_buf in the chain.
The changes to this API are needed in order to clarify following
use cases:
1) User provides fragment that is not first of the chain and compact is
successfully done. In this case there is no free space in fragment list
after the input fragment. But there might be empty space in previous
fragments. So fragment chain is not completely compacted.
2) What if input fragment has been deleted and api returns the same
buf?
So this commit simplifies the API behavior. Now net_nbuf_compact()
expects the first parameter to be either TX or RX net_buf and then it
compacts it. It fails only if the input fragment is a data fragment.
Change-Id: I9e02dfcb6f3f2e2998826522a25ec207850a8056
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The net_nbuf_push() API is not used by anyone. Semantics are not
clear and following patch requires changes to push api, so removing
this API for now. If needed this can be re-introduced later.
Change-Id: I1d669c861590aa9bc80cc1ccb08144bd6020dac5
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Test with max data in order to test the fragmentation code better.
Change-Id: I301a96eae1dd637f0291354120389c2bd7575695
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This commit changes the net_buf getter functions in nbuf.h
by adding a timeout parameter. These function prototypes
are changed to accept a timeout parameter.
net_nbuf_get_rx()
net_nbuf_get_tx()
net_nbuf_get_data()
net_nbuf_get_reserve_rx()
net_nbuf_get_reserve_tx()
net_nbuf_get_reserve_data()
net_nbuf_copy()
net_nbuf_copy_all()
net_nbuf_push()
net_nbuf_append()
net_nbuf_write()
net_nbuf_insert()
Following convinience functions have not been changed
net_nbuf_append_u8
net_nbuf_append_be16
net_nbuf_append_be32
net_nbuf_insert_u8
net_nbuf_insert_be16
net_nbuf_insert_be32
net_nbuf_write_u8
net_nbuf_write_be16
net_nbuf_write_be32
so they call the base function using K_FOREVER. Use the
base function if you want to have a timeout when net_buf
is allocated.
Change-Id: I20bb602ffb73069e5a02668fce60575141586c0f
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This was ported to the new kernel, no need to keep the old one around.
Change-Id: I02d39c8e39843cee1862448296e9c1d0dfde75b9
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Adds to BT shell app functionality to trigger to be found on remote
A2SRC UUID. Implements user callback to read resolved response data
and uses existing SDP client API to read attributes values.
> HCI Event: Number of Completed Packets (0x13) plen 5
Num handles: 1
Handle: 77
Count: 1
> ACL Data RX: Handle 77 flags 0x02 dlen 48
Channel: 64 len 44 [PSM 1 mode 0] {chan 0}
SDP: Service Search Attribute Response (0x07) tid 2 len 39
Attribute bytes: 36
Continuation state: 0
Combined attribute bytes: 89
Attribute list: [len 84] {position 0}
Attribute: Service Record Handle (0x0000) [len 2]
0x00010005
Attribute: Service Class ID List (0x0001) [len 2]
UUID (3) with 2 bytes [0 extra bits] len 3
Audio Source (0x110a)
Attribute: Protocol Descriptor List (0x0004) [len 2]
Sequence (6) with 6 bytes [8 extra bits] len 8
UUID (3) with 2 bytes [0 extra bits] len 3
L2CAP (0x0100)
Unsigned Integer (1) with 2 bytes [0 extra bits] len 3
0x0019
Sequence (6) with 6 bytes [8 extra bits] len 8
UUID (3) with 2 bytes [0 extra bits] len 3
AVDTP (0x0019)
Unsigned Integer (1) with 2 bytes [0 extra bits] len 3
0x0102
Attribute: Browse Group List (0x0005) [len 2]
UUID (3) with 2 bytes [0 extra bits] len 3
Public Browse Root (0x1002)
Attribute: Bluetooth Profile Descriptor List (0x0009) [len 2]
Sequence (6) with 6 bytes [8 extra bits] len 8
UUID (3) with 2 bytes [0 extra bits] len 3
Advanced Audio Distribution (0x110d)
Unsigned Integer (1) with 2 bytes [0 extra bits] len 3
0x0102
Attribute: Unknown (0x0100) [len 2]
Advanced Audio [len 15]
Attribute: Unknown (0x0311) [len 2]
0x0001
< ACL Data TX: Handle 77 flags 0x00 dlen 12
L2CAP: Disconnection Request (0x06) ident 10 len 4
Destination CID: 65
Change-Id: I8938d9eebda31f3d252ff49adc1a96abfcbc5751
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Makes use ProfileDescriptorList atribute API to get remote Hands-Free
profile version.
Jira: ZEP-1112
Change-Id: I3752691057e15c3a9a681dd3277ac160096792e9
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Adds pool memory for storing SDP client query results and introduces
command allowing add HFPAG UUID to be resolved when connection to peer
is already set. When resolved data arrives, UUID callback handler
tries to identify RFCOMM protocol specific information, in this case
remote HFPAG Server Channel Number, stored in Protocol's Descriptor List
attribute data.
> HCI Event: Number of Completed Packets (0x13) plen
Num handles: 1
Handle: 77
Count: 1
> ACL Data RX: Handle 77 flags 0x02 dlen 55
Channel: 64 len 51 [PSM 1 mode 0] {chan 0}
SDP: Service Search Attribute Response (0x07) tid 2 len 46
Attribute bytes: 43
Continuation state: 0
Combined attribute bytes: 96
Attribute list: [len 91] {position 0}
Attribute: Service Record Handle (0x0000) [len 2]
0x00010003
Attribute: Service Class ID List (0x0001) [len 2]
UUID (3) with 2 bytes [0 extra bits] len 3
Handsfree Audio Gateway (0x111f)
UUID (3) with 2 bytes [0 extra bits] len 3
Generic Audio (0x1203)
Attribute: Protocol Descriptor List (0x0004) [len 2]
Sequence (6) with 3 bytes [8 extra bits] len 5
UUID (3) with 2 bytes [0 extra bits] len 3
L2CAP (0x0100)
Sequence (6) with 5 bytes [8 extra bits] len 7
UUID (3) with 2 bytes [0 extra bits] len 3
RFCOMM (0x0003)
Unsigned Integer (1) with 1 byte [0 extra bits] len 2
0x03
Attribute: Browse Group List (0x0005) [len 2]
UUID (3) with 2 bytes [0 extra bits] len 3
Public Browse Root (0x1002)
Attribute: Bluetooth Profile Descriptor List (0x0009) [len 2]
Sequence (6) with 6 bytes [8 extra bits] len 8
UUID (3) with 2 bytes [0 extra bits] len 3
Handsfree (0x111e)
Unsigned Integer (1) with 2 bytes [0 extra bits] len 3
0x0106
Attribute: Unknown (0x0100) [len 2]
Handsfree Gateway [len 18]
Attribute: Unknown (0x0301) [len 2]
0x01
Attribute: Unknown (0x0311) [len 2]
0x0027
< ACL Data TX: Handle 77 flags 0x00 dlen 12
L2CAP: Disconnection Request (0x06) ident 5 len 4
Destination CID: 64
Source CID: 64
> HCI Event: Number of Completed Packets (0x13) plen 5
Num handles: 1
Handle: 77
Count: 1
> ACL Data RX: Handle 77 flags 0x02 dlen 12
L2CAP: Disconnection Response (0x07) ident 5 len 4
Destination CID: 64
Source CID: 64
Jira: ZEP-1112
Change-Id: Ibda606fabe367ca3d0353f77c7093da8c4f175c8
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
riscv defines the machine-mode timer registers that are implemented
by the all riscv SOCs that follow the riscv privileged architecture
specification.
The timer registers implemented in riscv-qemu follow this specification.
To account for future riscv SOCs, reimplement the riscv_qemu_driver by
the riscv_machine_driver.
Change-Id: I645b03c91b4e07d0f2609908decc27ba9b8240d4
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
If we send unicast NS, then the destination IPv6 address needs
to be in the neighbor cache, otherwise we have a NS sending loop.
Change-Id: I11e8f5d5740248024a0becc77055786cd2e32199
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The compact function was never really properly tested
but it is used by other routines that have unit tests.
This commit makes sure there is a special testing for
the buffer compact function.
Change-Id: I35c108fd8459a9482ccae68a51ffa28fb2e0ae99
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This tests access to standard libraries. Adapted
to use ZTEST.
Jira: ZEP-932
Change-Id: I3564bfa61221b2456323c1018402237b6129b5ca
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Some header files were defining MON and causing a conflict, so call this
something unique and avoid future conflicts.
Change-Id: If9d2553a20b3afae50a09f4c0e10733ee1cdd58d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This is the microkernel version of the FPU sharing test from legacy
modified to use unified APIs directly.
Jira: ZEP-932
Change-Id: I133a1466ea75201a97c2f8b83c3586fea0a19447
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Each GCC target backend is at liberty to define its own SIZE_TYPE. GCC
uses this for various purposes, not lease it drives the machinery that
spits out format specifier diagnostics when format specifiers are
applied to objects with inappropriate type. GCC exposes the current
definition of SIZE_TYPE via the preprocessor symbol __SIZE_TYPE__.
The GCC build processes also generates various standard library header
files that directyle expose stanard types in a form consistent with
the current configuration of GCC. Conventionally standard library
build processes (for glibc and newlib) pick up the header files
generated by the GCC build.
In the minimal libc we have no such build process, we don't pick up
the header files that the GCC build process generated. Instead we
define our own alternative header files and align them with GCC
manually.
The current definition of ssize_t in minimal libc is out of step with
GCC which means that any use of the %z[du] format modifier will issue
a diagnostic.
We replace the open coded architecture detection in minimal libc and
use GCCs __SIZE_TYPE__ directly.
Change-Id: I63b5e17bee4f4ab83d49e492e58efd3bafe76807
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
tests: fs: Fix printf warning when using newlib
Current code uses %ld format specifier to print data of
type ssize_t. This causes type warnings when built with
newlib. The correct format specifier to be used for
ssize_t is %zd.
Change-Id: I02a3c628e3d6e8a36a09cd694220406d8faf1730
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
We ended up having "benchmark" and "benchmarks". This
fixes that.
Change-Id: I7ebc409e002e11f5bc9dc821310dd84f3982b8d4
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Right now works only on x86, filed bug to address all architectures
(ZEP-1414).
Change-Id: Iba53b3688b2b78a4189df0b50578070a8d2ac8b2
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This test was not using any legacy APIs, so simply
removed legacy from conf and ini's.
Jira: ZEP-932
Change-Id: I5a4b475ac5056b6d6aa64baef6bda53f20d8548e
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
This change ports tests/legacy/benchmark/sys_kernel stuff to
use unified APIs.
Change-Id: If6fbaa5586502205e9f4dc6e79ff1c1a1c1b8102
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
These were part of latency_measure benchmark, but was
used in all benchmarks.
legacy symbols in timestamp.h were replaced to unified
ones. Tick based checks have been replaced with ms based
checks in line with the new APIs.
Change-Id: I1d27310023be4cafbceccf50cb87d72b6681443d
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Instead of using a hard-coded string, make the sample use the Kconfig
variable for the device name.
Change-Id: Ib09f594e1cba221f9064318572bd90d38bd2733a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Change BREDR_NAME to DEVICE_NAME so it can also be used as the LE
device name.
Change-Id: I9ef55d9dff098372d47d9d5754ad7a7163a65bc0
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The for loop could exit with a out of bounds (variable j) value for
the delayed_threads array, we verify for the variable value before
operating on the array
This issue was reported by Coverity
Coverity-CID: 160078
Change-Id: I6aa1cc325cc363be48cd72b2a58d0a55ec3854bc
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Option CONFIG_NET_IPV6_NO_DAD is not used anymore, clean project
configuration files.
Change-Id: I368e076d2f79f1d4bc86edee11ff5befe37362c8
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Routing tests uses ND so do not disable it, otherwise tests might fail
if disabling ND supported.
Change-Id: Ie020de8dac4447931d1067f1ed781a72cf05e8af
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The cause for this change is TCP. Until now, the radio strategy driver
(ALOHA or CSMA) was providing the actual nbuf, and not the buffer
fragment, counting on the fact that the loop was using
net_buf_frag_del() which made so, iteration after iteration, buffer
framgent to be always buf->frags. The problem with this logic is loosing
the fragments that might be still referenced by TCP, in case the whole
buffer did not make it so TCP can retry later and so on.
Instead, TX now takes the nbuf and the actual frag to send. It could
have been working with just a pointer on the data, and the whole length
of the frame. But it has been avoided due to possible future devices,
that will be smarter and run CSMA directly in the hw, thus it will
require to access the whole buffer list through the nbuf.
Change-Id: I8d77b1e13b648c0ec3645cb2d55d1910d00381ea
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The option is no longer used so it can be removed.
Use CONFIG_NET_IPV6_ND option instead.
Change-Id: Ibaa3d3deb52b8b176e85f8b9e1d8c80c1026aea1
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Use printk(), snprintk() instead of printf() and snprintf().
CONFIG_STDOUT_CONSOLE is anyway disabled by default so printf()
will not output anything without it.
Change-Id: I5899741df2e187dae7b4602d074e9b4cbb9952aa
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The debug config was incorrect.
Change-Id: Id32cbcfb809acc9e4ab202b401d25e41a7531c42
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
We're using SPDX tags for Apache 2.0 licensing instead of the
Apache 2.0 boilerplate comment block.
Change-Id: I9e56f918ab4ed4d127dbe64538c9fa62886386a8
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Remove dev driver and integrate it in the default pinmux driver.
Jira: ZEP-958
Change-Id: I55670240f8a21749d3a6ae22e300e16ba80a2fb6
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
According to include/gpio.h, GPIO_INT_LEVEL is 0,
which means the branch to test GPIO_INT_LEVEL is
always false and GPIO_INT_LEVEL cases will always
pass.
This patch also fixes another minor bug in main.c.
Coverity-CID: 160074
Change-Id: I1fefa978e65bf801f244b4c2960cb87a26b0829e
Signed-off-by: Qiu Peiyang <peiyangx.qiu@intel.com>
According to Coverity, rand() is a risk function.
So we use another method to generate random value.
Coverity-CID: 160070
Change-Id: Icb7e06cd43cb8bade6596cc37e9d04bfc59e1de7
Signed-off-by: Qiu Peiyang <peiyangx.qiu@intel.com>
In RISCV, stack always grows by a multiple of 16 bytes, even if we are saving
data of size < 16 bytes onto the stack.
Hence, for riscv32 architecture increase stack size to 512 for
threads_customdata, otherwise we experience stack overflow.
Change-Id: I805bc346b8a2c2f4ad6d0db622eb262290af942b
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
In RISCV, stack always grows by a multiple of 16 bytes, even if we are saving
data of size < 16 bytes onto the stack.
Hence, for riscv32 architecture a bigger stack size is required for
test_mpool_concept, otherwise we experience stack overflow.
Change-Id: I938aa511efcae66f0131fa1bc23bd68600421885
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
When trying to build with newlib we get:
hci_driver.c: In function 'hci_driver_open':
hci_driver.c:389:10:
error: format '%d' expects argument of type 'int', but argument 2 has
type 'uint32_t {aka long unsigned int}' [-Werror=format=]
BT_ERR("Required RAM size: %d, supplied: %u.", err,
^
This is because we have different types for {u}int32_t between newlib
and mini-libc. We have to decide how we are going to handle this going
forward. Various options include use of PRIu32, making mini-libc match
newlib's types, disabling the -Werror=format, etc.
Change-Id: I5df8fa05dd7658e1f6b2eeb8fa84e3270f3dd208
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
"struct k_mbox_msg mmsg" should be initialized before using.
"int" value returned by k_mem_pool_alloc() should be checked.
Coverity-CID: 160083
Coverity-CID: 160470
Change-Id: I35714bf9d76723c5fdd8c2963bf76b42ae1b1867
Signed-off-by: Sharron LIU <sharron.liu@intel.com>
assert should not contain "i++" which might work differently in a non-debug
build.
Coverity-CID: 160469
Change-Id: Id8fd50127dd93de1676b812ac0888c9ec2e1b5de
Signed-off-by: Sharron LIU <sharron.liu@intel.com>
"int" value returned by k_mem_pool_alloc() should be checked.
Coverity-CID: 160471
Change-Id: I7ec19147e7a51997fed890075b06eba30bef9126
Signed-off-by: Sharron LIU <sharron.liu@intel.com>
This patch changes Quark SE power drivers to support multicore scenarios
e.g. both LMT and ARC core are enabled and manage power.
Handling LPS states in multicore scenarios are dead simple because LPS
states are core-specific states. It means that putting the LMT core in
LPS doesn't affect the ARC core, and vice-versa. DEEP_SLEEP state, on
the other hand, affects both cores since it turns power off from the SoC
and both cores are shutdown. It means that if LMT puts the system in
DEEP_SLEEP, ARC core is shutdown even if it is busy handling some task.
In order to support the multicore scenario, this patch introduces the
SYS_POWER_STATE_DEEP_SLEEP_2 state to both ARC and x86 power drivers.
On ARC, this state works as following:
1) Save ARC execution context;
2) Raise a flag to inform the x86 core that ARC is ready to enter in
DEEP_SLEEP;
3) Enter in the lowest core-specific power state, which in this case is
LPSS.
On x86, DEEP_SLEEP_2 is very similar to DEEP_SLEEP. The difference relies
in the post_ops() which calls _arc_init() in order to start ARC core so
it can restore its context.
This patch also adds the test/power/multicore/ directory which provides
sample application to x86 and ARC cores in order to easily verify the
multicore support. In test/power/multicore/README.rst you can find more
details regarding the applications.
Jira: ZEP-1103
Change-Id: Ie28ba6d193ea0e58fca69d38f8d3c38ca259a9ef
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
"ret" returned from k_msgq_put() should be checked.
Coverity-CID: 160084
Change-Id: I192db3a67ab9489e8338f6636d4c2a6935e98d74
Signed-off-by: Sharron LIU <sharron.liu@intel.com>
This avoids asm files from having to explicitly define the _ASMLANGUAGE
symbol themselves.
Change-Id: I71f5a169f75d7443a58a0365a41c55b20dae3029
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
The K_<thread option> flags/options avaialble to users were hidden in
the kernel private header files: move them to include/kernel.h to
publicize them.
Also, to avoid any future confusion, rename the k_thread.execution_flags
field to user_options.
Change-Id: I65a6fd5e9e78d4ccf783f3304b607a1e6956aeac
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
Convert testcases to use the CMSIS NVIC APIs or direct NVIC register
access rather than the internal ones so we can remove them in the future.
Change-Id: I2a5a3eae713e66944cf105e7fffa603b88522681
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
_NvicSwInterruptTrigger is only utilized by a testcase for irq handling
on ARM-V7M. Just put the code into the testcase so we dont need to
support an additional interface.
Change-Id: I763c63c32a7a52918250458351d08b8fa54069dd
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Some new tests were added that had the Apache 2.0 boilerplate licensing
instead of the SPDX licensing tag.
Change-Id: I4bde8c9c6e7a6d44bceeffb6bbcff9f62d417648
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
It is useful that the user API can know whether the connection
was established properly or not. So this commit adds status
parameter to connect callback in net_context API.
The call to connect callback needs to be set properly in TCP
code. This commit does not fix the connect callback call which
is not properly done right now in net_context.c.
Change-Id: I284a60ddd658ceef9e65022e96591f467a936a09
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the prefix length % 8 is not 0, then the remaining
bit length was calculated incorrectly and the prefixes
were claimed to match even though they might not be the
same.
Adding a test cases for testing this properly.
Coverity-CID: 157591
Change-Id: I9cb5a73d5cc211ec183176400fa5e2dfd209e2da
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
- Introduce NET_LINK_ADDR_MAX_LENGTH which is either 6 or 8
depending on whether CONFIG_NET_L2_IEEE802154 is used
- Instead of being a placeholder single index array of uint8_t,
let's use NET_LINK_ADDR_MAX_LENGTH to assign the size of the
"addr" array field in the net_linkaddr_storage structure.
- Now that the "addr" field of net_linkaddr_storage contains the
true size of the link address, we can remove "storage" field
which was hard coded to 8 bytes (2 uint32_t's).
- Fix 2 references to the "storage" field of the net_linkaddr_storage
structure.
Change-Id: I2ea12058280b289f65085964eb7d503d4fd260c2
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Add kernel pipe test cases which cover basic pipe apis usage
across thread and isr
Change-Id: I11899411b305535297f2e25056678d5b7df8fb95
Signed-off-by: jing wang <jing.j.wang@intel.com>
Add fifo/fifo test cases with unified kernel, which cover
basic apis across differnt contexts - thread and isr
Change-Id: Icb61d3dcd564167b0bd70419c652e0b000869959
Signed-off-by: jing wang <jing.j.wang@intel.com>
TestPurpose: verify memory pool concepts.
All TESTPOINTs extracted from kernel documentation.
https://www.zephyrproject.org/doc/kernel/memory/pools.html#concepts
ZEP-1210
Change-Id: I6250e4c26ddf361e74a76c23082cfdb376705560
Signed-off-by: Sharron LIU <sharron.liu@intel.com>
TestPurpose: verify memory pool APIs.
All TESTPOINTs extracted from kernel-doc comments in <kernel.h>
ZEP-1210
Change-Id: I7dcc0638e7b9c4d6b5ffe282e4fe41ca520d003f
Signed-off-by: Sharron LIU <sharron.liu@intel.com>
TestPurpose: verify API thread safe in multi-threads environment.
Thread safe test is explained with more details here:
https://gerrit.zephyrproject.org/r/#/c/9464/7/ test_mpool_threadsafe.c
Please comment if you think it necessary as an extensive kernel test.
Jira: ZEP-1209
Change-Id: I52a7ff393d72785622c047289e7d92286e131cc7
Signed-off-by: Sharron LIU <sharron.liu@intel.com>
TestPurpose: verify memory pool concepts.
All TESTPOINTs extracted from kernel documentation.
https://www.zephyrproject.org/doc/kernel/memory/slabs.html#concepts
ZEP-1209
Change-Id: I95c6cd666212218b9928356f9439e67a2fcf9b73
Signed-off-by: Sharron LIU <sharron.liu@intel.com>
TestPurpose: verify memory slab APIs.
All TESTPOINTs extracted from kernel-doc comments in <kernel.h>
ZEP-1209
Change-Id: I80bc85e96110e7106b3fc5883b982d71c6a7e50b
Signed-off-by: Sharron LIU <sharron.liu@intel.com>
tests/kernel/mem_slab --> tests/kernel/mem_slab/test_mslab
For the purpose to hold other mslab test apps.
Jira: ZEP-1209
Change-Id: I4a72b02a0a5095bb7cfbf73396b6d003ea63f92e
Signed-off-by: Sharron LIU <sharron.liu@intel.com>
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.
Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.
Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file. Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.
Jira: ZEP-1457
Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Coverity was warning about an array overrun that should never happen.
Add an extra check to verify that is indeed the case.
Coverity issue 152017.
Change-Id: Ie6269acaa85387ba051dbff87b4bfaab860517a6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Having TX buffers split into numerous pools has the downside of
increased memory consumption. This patch takes the initial step to
consolidate these pools into a single one, saving about 248 bytes of
RAM for a basic configuration.
Change-Id: I449ba18b44a9a6af68e9a2c44f19a9286eb88b14
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Added TICK_IRQ definition for CONFIG_PULPINO_TIMER and
CONFIG_RISCV_QEMU_TIMER
skip definition of HAS_POWERSAVE_INSTRUCTION for
CONFIG_SOC_RISCV32_QEMU, since it does not provide
power saving instruction.
Otherwise, not passing sanitycheck.
Change-Id: I2faa823226cd76d129d2bc3db961c9b862aaf784
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
Added TICK_IRQ definition for CONFIG_PULPINO_TIMER and
CONFIG_RISCV_QEMU_TIMER
skip definition of HAS_POWERSAVE_INSTRUCTION for
CONFIG_SOC_RISCV32_QEMU, since it does not provide
power saving instruction.
Otherwise, not passing sanitycheck.
Change-Id: I43a5c5112d694efdc14c5a0bcb4cafdc196d2680
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
The commit verify below PWM apis
pwm_pin_set_cycles()
pwm_pin_set_usec
test PWM apis under always-on, half-on and alway-off modes
Change-Id: I2251be23ad9c443703dac44e138651a63d2d7211
Signed-off-by: jing wang <jing.j.wang@intel.com>
Precursor patches have arranged that conditional compilation hanging
on CONFIG_CPU_CORTEX_M3_M4 provides support for ARMv7-M, rename the
config variable to reflect this.
Change-Id: Ifa56e3c1c04505d061b2af3aec9d8b9e55b5853d
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Merges the ksdk pinmux dev driver into the regular ksdk pinmux driver,
which now exposes the public pinmux API. Removes the private ksdk pinmux
API and converts the frdm_k64f and hexiwear_k64 boards to use the public
pinmux API.
Jira: ZEP-958, ZEP-1432
Change-Id: Ie5f60b604133093050b9c596050cad776d7b7cb3
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
A few CONFIG options got set twice in sensors_n_z.conf, remove the
duplicates as we get warnings associated with this:
warning: override: reassigning to symbol GPIO
warning: override: reassigning to symbol SENSOR
warning: override: reassigning to symbol SPI
warning: override: reassigning to symbol SYS_LOG_SENSOR_LEVEL
Change-Id: I7a723218db8e365bdb45c004e93bd2c4f55ab5ac
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This will replace the current goal of 'make qemu' with 'make run' and
moves Qemu handling into its own file and into the boards instead of
being architecture specific.
We should be able to add new boards that support some other type of
emulation (by adding scripts/Makefile.<emu type>) and allow the board to
define their own options for the use type of emulation.
'make qemu' will still work, however it will be deprecated, starting
with this commit it is recommended to use 'make run'.
Jira: ZEP-359
Change-Id: I1cacd56b4ec09421a58cf5d010e22e9035214df6
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
These samples/tests fail to build on some of the nRF5x platforms. We
don't need Bluetooth enabled for these tests so we can reduce footprint
by turning it off.
Change-Id: I87e62a1d70f80d2bc22414d6a9e591e36ad9fa06
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
RAM size has increased on arduino_101_ble which causes it to no longer
be able to build test_controller_dbg.
Change-Id: Iab8ed2857db23d048cfa6b04e2d1fea31efbb13c
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Some thread fields were 32-bit wide, when they are not even close to
using that full range of values. They are instead changed to 8-bit fields.
- prio can fit in one byte, limiting the priorities range to -128 to 127
- recursive scheduler locking can be limited to 255; a rollover results
most probably from a logic error
- flags are split into execution flags and thread states; 8 bits is
enough for each of them currently, with at worst two states and four
flags to spare (on x86, on other archs, there are six flags to spare)
Doing this saves 8 bytes per stack. It also sets up an incoming
enhancement when checking if the current thread is preemptible on
interrupt exit.
Change-Id: Ieb5321a5b99f99173b0605dd4a193c3bc7ddabf4
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Add global option for legacy configurations and enable by default for
backward compatibility. Disable option on tests and keep it on legacy
samples and tests.
Jira: ZEP-964
Change-Id: I0831e2aa74d438b1ac74eb762186cb220a504beb
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Disk IO functions are used by both FS and USB Mass Storage.
This patch refactors those from FS directory to a separate one.
In addition existing, config options were modified to make
stuff meaningful.
Jira: ZEP-1276
Change-Id: Ia2a2e18f3dbbbdb964c3dc0427d8138ad86134cd
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Remove legacy option and use SYS_CLOCK_EXISTS where appropriate.
Change-Id: I3d524ea2776e638683f0196c0cc342359d5d810f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The source address for a TCP SYNACK must (obviously) be the same as
the destination address of the SYN that produced it. But the existing
IP packet creation routines would simply fill in a default address
from the net_context struct, which is correct for *established*
connections, but for the listening socket is generally INADDR_ANY
(i.e. all zeroes) and will result in an arbitrary choice for source
address (e.g. a link-local address on the same interface) which can
easily be wrong.
So we need to pass the correct address all the way down from the SYN
packet handler code through the net_ipv*_create() packet creation
functions. This requires lots of API plumbing, but relatively little
logic change.
Change-Id: Ic368f8cef6689f8a27cbafd5933a4964d5cc457e
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Add Kconfig configuration and conditional compilation of
RSSI measurement during a connection.
Change-id: I5a2f23f76a7cbbd9569d53d31899a472bf39d3ee
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Add Kconfig configuration to conditionally enable Data
Length Update procedure support in the Controller.
This will save CPU time, flash and RAM, if this feature is
not desired.
Change-id: I4515c0c7cf9aeb333a289397ae3c9bac04a08e4e
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Add Kconfig configuration to conditionally enable LE Ping
feature in the Controller.
This will save CPU time, flash and RAM, if this feature is
not desired.
Change-id: I5fbbdbe8f45ac01c9b0d7b11e002a0d1db4d272e
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Add a test configuration to build a controller that
supports only Bluetooth v4.0 features.
This is copy of prj_controller.conf, but Kconfig defines
will be added in subsequent commits to conditionally
compile out feature not in Bluetooth v4.0 specification.
Also, added nrf52840_pca10056 and arduino_101_ble board
builds be tested.
Change-id: I36891bfc54cc36a8588c9b019de582e3193e8aa3
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
This helps simplify code that was previously combining net_buf_add()
with memcpy().
Change-Id: If44cf9cd651aba5e544e36567869f147468663eb
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Stack for fiber idtSpurFiber at tests/legacy/kernel/test_static_idt
for nanokernel is not big enough since printk parse context refactor
(commit 3ab6046), causing sanity check to fail with CONFIG_DEBUG=y.
Change-Id: Iddc74a2800163a22be985067ce828ac859ae4a24
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
By default, when a 'fatal fault' message is seen in the output of any
testcase, it is consider an inmediate fatal condition and the test
case is aborted.
However, this testcase is provoking the situation to verify the
condition is caught. This, it shall NOT be considered a fatal fault
and the default overriden to allow it to proceed.
This was done in the legacy testcases and now is moved to this
testcase, ported from legacy.
Change-Id: Icac6cf55cae2ffd9b071e9dd1f35918b7b30de5e
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Stack for task tStartTask at tests/legacy/kernel/test_sema/microkernel
is not big enough since unfied kernel was enabled by default for all
test (since commit c2de216).
Change-Id: I3332cd5e14ca384428834697a1841fa680a68b00
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
Fix build error (picked by GCC 6.x):
error: ‘stack_size’ defined but not used [-Werror=unused-const-variable=]
Change-Id: I402324fedaea9d0a10ee6533ba957ce18fa0fb83
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
To customise test builds and support test related features such as time
stamps and a boot banner, introduce a Makefile variant that is dedicated
to testing.
Initially we introduce a new config overlay that is used for all tests, in
this case we enable BOOT_BANNER and BUILD_TIMESTAMP. This will print the
current version and the date, useful when reporting bugs and also an
indicator that the system has booted before the test has started.
For example:
[QEMU] CPU: qemu32
***** BOOTING ZEPHYR OS v1.6.99 - BUILD: Dec 21 2016 19:57:13 *****
tc_start() - Test Nanokernel CPU and thread routines
Initializing nanokernel objects
...
..
Change-Id: I224318cdeb55a301964ea366dbc577e2e3a09175
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Let's make net stack having its own level of debugging through sys_log.
It replaces NET_DEBUG by NET_LOG_ENABLED, which is then semantically
better: someone wanting to log the errors might want that not only for
debugging.
Along with it, CONFIG_NET_LOG_GLOBAL option is added, in order to enable
all available logging in network stack. It is disabled by default but
might be found useful when warning/errors need to be logged, so it is
then unnecessary to selectively enable by hand all CONFIG_NET_DEBUG_*
options.
It is possible, locally, to override CONFIG_SYS_LOG_NET_LEVEL by setting
the level one want to NET_SYS_LOG_LEVEL. This can be useful on samples
or tests.
Change-Id: I56a8f052340bc3a932229963cc69b39912093b88
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
quark_d2000_crb does not build as ROM and RAM space are way too little
for it.
Change-Id: I1a5992dcd49f90fa6604cd8ab76db7e170be7cd4
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Add a test for the available space for the payload, so the problem with
the payload length doesn't regresses.
Change-Id: Ifef541d8428947eb482729aa773a7e9ddd2b6f81
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
It will be thus possible to enable only the error logging, or the other
sys_log levels.
Change-Id: I0c0ed789f7cfbb4811320e8f8249151288274873
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Fixes:
error: format '%u' expects argument of type 'unsigned int'
Change-Id: I02aaaea79150967d7831d89d0c05427bf2685708
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This moves the shell component into its own subsys and groups all
related files and options into a single place.
Additionally, one Kconfig option will now be required to enable the
shell:
CONFIG_CONSOLE_SHELL=y
The header files was also moved to include/shell/shell.h and can be now
referenced with
#include <shell/shell.h>
instead of
#include <misc/shell.h>
Updated documentation as well.
Change-Id: Iffbba4acfa05408055e9fd28dffa213451351f94
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
the commit include 5 ztest cases, cover the basic gpio APIs
including callback relevant and pin read/write functions.
It proves workable on intel quark c1000 and
arduino 101 platform
Change-Id: Iab30aa841cfa440c1f773b5a8c5ce0d68346c353
Signed-off-by: jing wang <jing.j.wang@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
the commit cover below apis by testing callback under RISE polarity
*) aio_cmp_configure
*) aio_cmd_disabel
Change-Id: Idc9ec3a2694950d0074b69d164ee2c1edac35c9a
Signed-off-by: jing wang <jing.j.wang@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
the commit cover basic message queue api testing across contexts
and some typical scenario
Change-Id: I82bb0c6a5df9d4436f5a98f78d1ad989e32282c8
Signed-off-by: jing wang <jing.j.wang@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
add semaphore test case which cover basic sema apis
across thread/thread and thread/isr contexts.
Change-Id: I2041969fcdc70a4dfc95438f067fbef8ebb31b19
Signed-off-by: jing wang <jing.j.wang@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
add unified kernel mutext test cases which covere basic
mutex apis under different conditions - timeout,
no_wait, forever
Change-Id: Iaab5bba80a6eebd89bfe675352d67b27024ad7bb
Signed-off-by: jing wang <jing.j.wang@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
add stack test cases which cover basic api usage across
threads and thread/isr.
Change-Id: I1f42fa1139899c932a14da18753b93972f561bc8
Signed-off-by: jing wang <jing.j.wang@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In unified kernel, memory maps are renamed as memory slabs.
This change ports tests/legacy/kernel/test_map stuff to
use unified APIs.
Change-Id: Ibf4d60fb53e45a119e6828a09f2638ee7def76b7
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This is the port of the legacy/kernel/test_critical test case to
the unified kernel, and to use the ztest framework
Change-Id: I10834cbb51446b4a12fc680c0b65438d550f4d85
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This is the port of the legacy/kernel/test_context test case to
the unified kernel
Change-Id: I344ac240eb3b48042477f8875115fdc3fca1154a
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The commit cover Interrupt Reset mode and Reset mode by 2 test cases.
They can't be tested in one shot, but need test separately.
api converage:
wdt_enable()
wdt_disable()
wdt_set_config()
wdt_get_config()
Change-Id: I44b20cfe97d860e8b25b2cab76f9d9398cfd8e69
Signed-off-by: jing wang <jing.j.wang@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
the test include 2 ztest cases, verfy below apis:
rtc_enable()
rtc_disable()
rtc_read()
rtc_set_config()
rtc_set_alarm()
rtc_get_pending_int()
Change-Id: Ifca2541312c5ec8d450803f1b6e4f5064098e7fe
Signed-off-by: jing wang <jing.j.wang@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This test case is under test set "lifecycle" against
https://www.zephyrproject.org/doc/kernel_v2/threads/lifecycle.html
Change-Id: I0d43c1a1798411c786efc45d76e6fd7c024c47dd
Signed-off-by: Sharron LIU <sharron.liu@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change-Id: Iaadba1a720130a496a83c245c7da4b95dff168fd
Signed-off-by: Sharron LIU <sharron.liu@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This allows to specify length of discovery from command line.
Change-Id: I3ad80e74b5cdc263e549ce309b75c1f5c117b653
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Make the buffer length for tx and rx are the same for
spi_transceive API call. QMSI only supports equal length.
This is clearly specifed in spi header file.
Also correct some coding style issues.
Change-Id: Ifd34683e8813dae9b692ad453176a93cb3848427
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
From code inspection, the driver always took timeouts in milliseconds.
The only sub-ms wait uses k_busy_wait(), which has microseconds
granularity, but its granularity does not depend on the system clock
tick rate.
Change-Id: If48363fd1fbeeb8e5ff0f0f2ca86e671d63bc571
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
the commit cover alert send and receive with 4 types -
DEFAULT, IGNORE, PENDING, CONSUMED which across thread and isr
context.
Change-Id: I41dae9ba2dc980bcd768f1220f55b5492bc8ae37
Signed-off-by: jing wang <jing.j.wang@intel.com>
Move logging out of misc/ to its own subsystem. Anything related to
logging and any new logging features or backends could be added here
instead of the generic location in misc/ which is overcrowded with
options that are not related to eachother.
Jira: ZEP-1467
Change-Id: If6a3ea625c3a3562a7a61a0ba5fd7e6ca75518ba
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
rename NANOKERNEL_TICKLESS_IDLE_SUPPORTED to
TICKLESS_IDLE_SUPPORTED and remove nanokernel occurances in Kconfig
files.
Make TICKLESS_IDLE depend on hardware that supports it.
Change-Id: I6a2e4fb0f7cf4b45475b48e71823ea089ee98759
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
There are static initializer macros available for most kernel objects
which we should use whenever possible.
Change-Id: I496f4d05d26801eddd21fae53bdd4fcdc3246fe3
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Moved all libc Kconfigs to where the code is and remove the default
Kconfig for selecting the minimal libc. Minimal libc is now the default
if nothing else is configured in.
Removed the options for extended libc, this obviously was restricting
features in the minimal libc without a good reason, most of the
functions are available directly when using newlib, so there is no
reason why we need to restrict those in minimal libc.
Jira: ZEP-1440
Change-Id: If0a3adf4314e2ebdf0e139dee3eb4f47ce07aa89
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Fixes this:
error: ‘zero_addr’ defined but not used [-Werror=unused-const-variable=]
...
Change-Id: I5b0baf597e62f3206e15638a63e129503b76b048
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
When going into DEEP_SLEEP mode, the ARC core now saves
its context. This includes:
- All core registers
- Stack pointer
- Program counter (restored by jumping to the restore code)
The arc reset code now checks if the GPS0 bit 2 is set.
This is similar to the behavior of the x86 core done by
the QMSI bootloader which is setting GPS0 bit 1 in order
to call the restore path instead of cold boot path.
The sample has been adapted in order to support the ARC.
Jira: ZEP-1222
Change-Id: I375f03b16b8a5fd1f07ead55cf7e4947d6290c9f
Signed-off-by: Julien Delayen <julien.delayen@intel.com>
Since the user data size is now stored in the pool there's very little
value in storing it as well per-buffer.
Change-Id: I17a99123b232423c52a2179b4eccd813728d51b1
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In order to keep the initialization process light-weight, remove
net_buf_pool_init() and instead perform the initialization of the pool
and buffers in a "lazy" manner. This means storing more information
in the pool, and removing any 'const' members from net_buf. Since
there are no more const members in net_buf the buffer array can be
declared with __noinit, which further reduces initialization overhead.
Change-Id: Ia126af101c2727c130651b697dcba99d159a1c76
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This is only for use with custom destroy callbacks, so that the
application gets isolated away from the details of how exactly the
buffers are managed. This opens up the possibility of switching away
from k_fifo to potentially better solutions, such as k_lifo.
Change-Id: I0d8322fdec3500d8ae060ae471b9448aeaa4572a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Ethernet build-all test was not being filtered base on RAM size so
build step LINK was failing with "region `RAM' overflowed by 192
bytes" error when running daily sanitycheck.
Added filter so this test is not attempted for boards with smaller
RAM such as quark_d2000_crb, which was causing daily build failure
Change-Id: I4ed3bef4f1c78e83890331db34fb1f2b2b066414
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
Restructure the RANDOM Kconfig to match the structure used in other
drivers with a single top level menu. Move the true random number
generators to appear first in the menu, with pseudo generators at the
bottom. Do not present pseudo generators if a true random generator
is presented.
This change implies that tests, samples and applications that require
the random driver interface must now select CONFIG_RANDOM_GENERATOR.
In order for tests and samples to build (and run) on platforms that
have no random driver it remains necessary to select
the CONFIG_TEST_RANDOM_GENERATOR.
Note that CONFIG_TEST_RANDOM_GENERATOR retains its original purpose of
enabling a random driver that delivers non random numbers for the
purpose of testing only.
Change-Id: I2e28e44b4adf800e64a885aefe36a52da8aa455a
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Remove CONFIG_TEST_RANDOM_GENERATOR from each test and sample where it
is not required.
Change-Id: I949f8e93c2cb1881622a5e48efeb87c43122a170
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Until now it has been necessary to separately define a k_fifo and
an array of buffers when creating net_buf pools. This has been a bit
of an inconvenience as well as blurred the line of what exactly
constitutes the "pool".
This patch removes the NET_BUF_POOL() macro and replaces it with a
NET_BUF_POOL_DEFINE() macro that internally expands into the buffer
array and new net_buf_pool struct with a given name:
NET_BUF_POOL_DEFINE(pool_name, ...);
Having a dedicated context struct for the pool has the added benefit
that we can start moving there net_buf members that have the same
value for all buffers from the same pool. The first such member that
gets moved is the destroy callback, thus shrinking net_buf by four
bytes. Another potential candidate is the user_data_size, however
right not that's left out since it would just leave 2 bytes of padding
in net_buf (i.e. not influence its size). Another common value is
buf->size, however that one is also used by net_buf_simple and can
therefore not be moved.
This patch also splits getting buffers from a FIFO and allocating a
new buffer from a pool into two separate APIs: net_buf_get and
net_buf_alloc, thus simplifying the APIs and their usage. There is no
separate 'reserve_head' parameter anymore when allocating, rather the
user is expected to call net_buf_reserve() afterwards if something
else than 0 headroom is desired.
Change-Id: Id91b1e5c2be2deb1274dde47f5edebfe29af383a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Disable MDEF option and set it only in legacy projects.
Change-Id: I2e1f011eb1f876af929140e36f71f0efb5e955c1
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The random driver, if enabled, is initialized by the kernel
initialization function. There is no need for applications or tests
to re-initialize the driver.
Change-Id: Ib4712dda937a7a83a8079c8aa662cec03c5416f8
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Stop using the specific k64 pinmux driver by default and start using the
more generic ksdk pinmux driver instead.
Jira: ZEP-1393
Change-Id: Id65b59518c386e6ba33cfa5c4c5bd541664d2b41
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This is used to disconnect a dlc.
Syntax:
>br-rfcomm-disconnect
Change-Id: I8f345d9fbb1f1f84bfb1f697322d9a87ff531797
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
There's now snprintk available that's more light-weight on the stack
than snprintf.
Change-Id: I6b3e4409703ca92fe6b8f4146ff47c490ab826cb
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
These correspond to the libc snprintf and vsnprintf APIs.
Change-Id: If3944972ed95934a4967756593bb2932c3359b72
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Not enough memory on this device with 8K of SRAM
Change-Id: I359cce806098cac7e0e2a9e00ce40c91bc535c5b
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This patch introduces a test that verifies the behavior of
CONFIG_RUNTIME_NMI at runtime.
The test is meant to be only for ARM Cortex-M targets.
Change-Id: I805a88e67fe47d396ac9e29e1275e5452a4b8a36
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
* Moved networking code into subsys/net.
* Renamed net/yaip to net/ip at the same time.
* Fixed the tests/net to compile
* Fixed the Makefiles and Kconfig files in subsys/net
to use the new location of the IP stack
Change-Id: Ie45d9e8cb45a93fefdf969b20a81e3b1d3c16355
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Check that we change the ll address in neighbor cache
properly when receiving NA.
Change-Id: Ib0373751abebdfe1c5e83fd38ec91b9587797e32
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Peer address is used when sending NS so that it is added
properly to neighbor cache.
Change-Id: I51c2e236a0b137f7ab086a782f3baced13aa3ee3
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Also disable prefix lifetime overflow test as it does not work
properly.
Change-Id: I54c8716f6a6d4f5bec76b0a61fe0e18e983924f4
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As the native IP stack is now the default, there is no need
for corresponding Kconfig option.
Change-Id: I08e4992f540f928a2b7378e8803e634e38725348
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit removes the legacy Contiki based uIP stack.
The new native IP stack must be used after this commit.
The commit also removes following things:
- legacy cc2520 driver
- legacy ethernet drivers
- legacy IP stack samples
and changes these things:
- disabled tests that only work for legacy IP stack
- select new IP stack by default
- enable random number generator by default as it is needed
by the new IP stack
Change-Id: I1229f9960a4c6654e9ccc6dac14a7efb9394e45d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Current reassembly of 802.15.4 packets works only if fragments are
in correct order. But as per RFC 6282 reassembly should be based on
offset parameter in fragmentation header.
Change-Id: Icdcb10b9aa8f5837063b0201a64f8eb050c75681
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
There were different tags defined in testcase.ini files for
networking tests. Unify these and change the tag to "net"
in all networking tests. This makes it easy to execute
all network tests via sanitycheck.
Change-Id: I8ce7ccf8cccca35234602e37f6568db0b986d181
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The net_buf tests were including net_ip.h which requires some
extra config options to be usable when the new native IP stack
is used. In order to avoid this dependency, define struct in6_addr
locally in the source file.
Change-Id: Iafe0d2b5b507665baaed23f5e2c55a9d9a300d47
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Which happens only when internal DEBUG is set to 1
Change-Id: I175943f32065ae81b1a4453dde40f36738c28084
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Instead of having to write "NET_TCP_BUF(buf)->flags & NET_TCP_CTL"
every single time, provide a NET_TCP_FLAGS macro that expands to this
expression.
Change-Id: Ie876c538599fabae6b800a53613b6ad17dc45620
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Dropping legacy API. This commit also contains updated
unit tests in order to pass the test.
Change-Id: Ibc7426837e2f4f23bb5f3ed3719635c5c3d0ed0f
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit adds the frdm_k64f board to the testcase.ini while list.
It also updates the README file with the build instructions and
firmware version used in this test.
Change-Id: Ia0e989d483aede51aa53e7453bbd1c260223372d
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
More logical place for net_ipv6_unspecified_address() is in ipv6.c
instead of net_if.c. Removing the net_if_ipv6_unspecified_addr()
variant as it is no longer needed.
Change-Id: Ib5b4f6748030a8bf50fb848a87eef2968e2bcbc8
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Adapting all unit tests so:
- main task's prj.mdef is already provided by unified kernel with a
default stack of 2kb.
- unified is the only kernel to be used now, removing unecessary kernel
type make option.
- removing all NANOKERNEL/MICROKERNEL related #ifdefs and so on.
Change-Id: I9b853dbd2aef971d355188cbf7fe2ececaaa80c1
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This creates a `struct net_conn_handle` that's only used as an opaque
pointer. The purpose is to avoid assigning a void* to a void** in
connection registering/unregistering functions, avoiding a
previously-caught bug by issuing an incompatible pointer types warning:
warning: passing argument 7 of 'net_tcp_register' from
incompatible pointer type [-Wincompatible-pointer-types]
Suggested by Andy Ross in 5beec6. This particular commit didn't catch
any bugs, but the one caught in 5beec6 wouldn't exist if this were in
place at the time.
Change-Id: I5c13fb4c5826adce6397feb7b400d36e426c4a87
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Added a test to send HBH option to IP stack. Currently
the test will always pass, activate some more debugging
to see what the IP stack is doing with the option.
Change-Id: Id0ab1590eb8216f5f67c4d43ce2e882186334198
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This can be used to store routing protocol specific data
into neighbor entry. By default no extra data is allocated.
Change-Id: Iabff0a1df676398a47b86adbc398c4f566dcc40a
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Microkernel test for 6lo was giving error because the
prj.mdef file was refering to wrong function name.
Change-Id: I4197c509fb266a908eb03cc0bda34e39c66b229c
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
fragment is only about testing 15.4 6lo fragmentation, so let's put it
in dedicated tests/net/ieee802154/ directory.
Change-Id: Ib838600e571753ab976c74dac78ee774f628c2ab
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
So reordering files in order to put more specific tests in it.
Change-Id: I000bc5efb8442d02e9a50e1b85cb45e0bec12789
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
No reassembly logic is changed besides removing the final reassembled
pointer. Instead of requiring such pointer, let's just use the frag one.
Such changes will ease the usage of ieee802154_reassemble():
the given frag buffer, in case it finally got reassembled and thus
provided a NET_CONTINUE verdict, will directly be handled by net_core.
This makes things consistent as well with verdicts:
- in case of NET_OK, buf has been consumed and thus unrefed
- in case of NET_DROP, buf needs to be unrefed by caller
- in case of NET_CONTINUE, buf is updated with reassembled and
decompressed data packet, up to net_core to handel it accordingly.
Change-Id: Ibd1588debd22a7f4571b36713dd46bf8b1d88329
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
As soon as fragment is put into the cache and as long as it is not
identified to be the last one: let's return NET_OK to notifiy the
fragment has been consumed by ieee802154 L2.
That way, net_core will not try to interpret it - and fail - unnecessary
increasing the drop statistics.
On the contrary, once the buffer is fully reassemble, let's return
NET_CONTINUE in order to let net_core consume the buffer relevantly.
Change-Id: I715b687e451f4643656e122b0d119f114696340b
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Buffer sent by 802.15.4 L2 might have more than one fragment, thus
handling it properly.
Change-Id: I12fef8a9c5de56615c3a084c57f438e71b320fcf
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Since "22e919872206b1d net: Adapt to new behavior of net_buf_frag_add"
net_buf_frag_add() takes onwership of the fragment, so this _unref()
after a net_buf_frag_add() is wrong.
Change-Id: I1559c2978cf8d800891d6e752478537fbee7c02b
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
This enables the tests for the observer feature to be run using the
native IP stack.
Change-Id: I325dcd1f5d9fffe3821eed1bd950a717e5f17b67
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Earlier test results was updated as soon as test server ACK client
dhcpv4 request. But update results on IPv4 address add event on
interface.
Change-Id: I212309a4d1d2eae88f73470e00754db1d6fecda5
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
RFC2131 requires that a client must choose XIDs in order to minimize
the chance of collision with another client. Selection of a random
XID at boot is a valid approach. Adjust the XID representation from
array of bytes to the more convenient uint32_t representation,
initialize the XID to a random number and increment for each request.
Refactor the dhcp test case to generate response messages with the XID
from the received message.
Change-Id: I93f180e6aa02430f807e0a97186577dc956fb653
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
The test "Test block sized transfer" does not work with
new IP stack so disable it temporarily for new stack.
This needs to be fixed later.
Change-Id: Ie89dd101270ab9b8a9b056757de79cd3da009180
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Rename project configuration to be architecture independent and do not use ARCH
in Makefile.
Change-Id: Ic793751e3187bc74fd14cec929754d691b01a799
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This provides only initial set of functionality tests
for TCP. More tests are to be written.
Change-Id: I157fed85f561523bf063732ce86eaae551c2d384
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Current net_nbuf_write() api just appends data to last fragment. And
doesn't write data based on offset. That's why renaming this api.
New net_nbuf_write() apis based on offset will be coming soon.
Change-Id: Ie8e13e5f6091a279b62b6d8b0b3928a5187e75b0
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This ports zoap to the native stack.
Just for reference, and totally not scientific, here are the numbers
using the old stack:
$ size outdir/qemu_x86/zephyr.elf
text data bss dec hex filename
34657 10316 16916 61889 f1c1 outdir/qemu_x86/zephyr.elf
With yaip:
$ size outdir/qemu_x86/zephyr.elf
text data bss dec hex filename
30575 9148 6164 45887 b33f outdir/qemu_x86/zephyr.elf
Jira: ZEP-818
Change-Id: I7992a3e2af7d419081ee5a64d7cc2d49fb628ead
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Valid case:
1) If the offset is more than current fragment length, adjusts offset
from next relevant fragment and starts reading or skipping.
2) If the read or skip length is more than available data length,
then throw an error.
In case of an error, frag is 'NULL' pos is '0xffff'. Rest of the cases
are successful read and skip.
Change-Id: I88c4b85e14e5821f681966b5148ba9519b91cca4
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
RFC 6282, 3.1.1 (If SAC == 1 and M = 0, DAC = 1).
Source and Destination address compression support if addresses are
based on context based information from Router Advertisement message.
Change-Id: I23a3bf4f111016a8e54be5f0181a113353ad4b88
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Test is only for parsing 6CO data. Nothing more than that.
Change-Id: I7e5851f389216473379a9e50b83dfb03fbe1e68e
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The memcmp() could reach after the buffer that is used for verification
ends, which was causing this test to fail on the qemu_cortex_m3 board.
Change-Id: Ia05df823f201d9017acb35c7634fa506389ae9f1
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
linearize() expects the amount of room available in the buffer.
Change-Id: I1062912f76951758177b7dd6588e7e0ae280dc03
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Quark D2000 doesn't not have enough RAM for these tests.
Change-Id: Iba79eaadb15eb8f1eae4bfdbc6865985d3da3fd3
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Buffer leaks are fixed in 6lowpan compression and ieee802154
fragmentation. So lower the count in tests.
Change-Id: Ic9581f898156fedc20a3e445be8b7a466ee15d99
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
A fake network device and interface are setup. Test implies add and
removing an IPv6 address which should trigger the related notification.
Change-Id: I6035cfbfaf80c8f4352b5d31b47ca1445434d926
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
While doing some documentation for it, I realized names were not all
good and it missed some stuff:
- what belongs to event should contain "event" in it
- we have a structur as callback so let's type the handler as a handler
- let's add the request handler signature
Change-Id: I18822cbcdc3c10e33600d6db38abab5ca73a228c
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Use ?= for the CONF_FILE variable to match the default assignement for
BOARD ?= qemu_x86.
Change-Id: I0b6cf1e967eeb437d99aa7286cf560426d48fbf9
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
It mimics how event could be thrown through a dedicated thrower (a
fiber). The amount and event it can throw is gived through parameters.
Change-Id: I484bc72bdb730a77ce976b0b2998411d9918b7fc
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Basic unit tests for Router Advertisement message handler.
Change-Id: Ia99cd160632972a12e2099a3ff6e41e6ea48ff9b
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The buf parameter cannot point to a data fragment in
net_nbuf_write() because we need to use user data inside
that function and the fragments do not have that information.
Change-Id: I45b9c23869df08a0852bd99c0b453210ad2300b5
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Tests for net_nbuf_read, net_nbuf_write and net_nbuf_skip API's.
Change-Id: I77f702dda8c9df7892120f47ff03a6b256191d31
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
One second timeout seems to be too short as some test runs
fail when run in Jenkins.
Change-Id: Ifb01929148415961712468e3cc85387aac5eb2bb
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It's an empty beacon frame, juste to validate the Beacon frame parsing
logic.
Change-Id: I90916eb87187c9eae9b2267f34dc93bee554d4b5
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If ethernet address is broadcast or multicast, l2 layer does not
send any ARP messages. Handle this scenario in ethernet tests.
Change-Id: I8e11832803e1539887152447090d1286c7fa3eb0
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If the connection establishment has an error, the accept
callback needs to be able to return that error to user space
so that the application can know about it.
This is especially important in TCP where application needs
to start to listen again if reset is sent during connection
establishment.
Change-Id: I55f36e4f101c7237c1288f09baf6e602b33da2b3
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Some of the DEBUG options for the new IP stack still used
the CONFIG_NETWORK_IP_STACK_DEBUG_ prefix.
Change-Id: I8f039ac5e303a7c571a870403ce17d758db540d5
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
- new stack options are renamed and placed in their respective menus
- new stack Kconfig gets normalized (tabs vs spaces, etc...)
Change-Id: Ia68f6589fed464bbdd76dc0812775684b2f94a58
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Add socklen_t addrlen parameter to net_context_bind(),
net_context_sendto() and accept callback.
Currently the address length option is not really mandatory
as we can figure out the length from the address family.
But if we are going to support other protocol address families
it might be needed.
Change-Id: I59206465c3259050c469c5b2150221646a9a08d7
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Because of printk fixes in master, some of the networking
unit tests will fail in next merge.
Change-Id: I3e28aae72c0c10b402b78c0f406ecb3513b967a7
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Earlier all unit tests are with IPv6 and UDP as next header.
Modified tests with IPv6 only, IPv6 + UDP and IPv6 + IPHC next
headers.
Change-Id: Ie02cecb37e07ceae8a06a0653e2ccdfe0db91239
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
We are not just checking the test build but this time
the tests are also run.
Change-Id: I7b0b24c51dfc2dc58f290cca7a593be431b8077f
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
For consistency as well as for helping when grepping etc.
Change-Id: Ib5e6b3369e510dd2b996f735d801c2b80291ad7f
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is only meant for the new IP stack.
Change-Id: I643b0556f87423f09555274749db93397ef66c59
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Reassembly IEEE 802.15.4 fragments as per it's datagram size
and datagram tag. Uncompress IP header fragment as soon as it
arrives. Size matches only after uncompression of IP header with
total length.
Support added for multiple IP packet reception. Default is one full
IP packet at a time. Cache size can be modified via Kconfig option
(NET_L2_IEEE802154_FRAGMENT_REASS_CACHE_SIZE).
Note: If you increase the size by 1 means, you should have N number
of data buffers available at max.
e.g. One full IP packet (1280 MTU) needs 15~16 data fragments means,
multiply size by same number of fragments. It requires more memory.
Offset based reassembly yet to be done (fragments can come in any order
[e.g. mesh]). Now assuming that fragments are in right order.
Change-Id: I17baee30a1087eb9ec6dc25f03ed64bbe0df2917
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Add support for IPv6 header dispatch (without IPv6 compression
and uncompression). Only IPv6 dispatch header will be added at the
beginning of the buffer.
Change-Id: I7400a4dd115ac3b4b3d9deecd3cdb9ea292573fb
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
6lowpan compression and uncompression done on original
input buffer. So no need to return paramter as net_buf *.
If the compression or uncompression fails, unref the buffer
as it cannot be used further.
Change-Id: I64f496e22b2008a91a358fff65de1b87659cd9eb
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
UDP length was wrongly set and test count was hardcoded.
Change-Id: Iade959e1b8c3580b43aa2a9ff1fc10eb5a462f2f
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
- Parsing a proper ACK reply
- Generating a ACK reply from a data packet requesting it, and comparing
it to a proper one.
Change-Id: I1717fedc899eafa0aa849e1e253f02cd3dc3d4fc
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
First test is a unit test for frame parsing
Change-Id: I080d64a71fe4b6ff00e071a0cdee97ab9cd922d5
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Allocate the right amount of space for L2's context.
Change-Id: Ia2f4f4162334e9e9c26dc95230abdfde5986e052
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is related to changes in commit 7dcbbc39e7
("build: move from srctree to ZEPHYR_BASE for app include paths")
Change-Id: Ie902ed66bb74188ed54aae44e2f4289f954ec351
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When a UDP packet has been received and if a watcher match
is found, then a callback is called. It is useful to have
a pointer to net_conn when calling the callback.
Change-Id: Ifa97b37c22b1fc9cac7eadfba23aa68dfd473fda
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As the net_conn needs port information, use struct sockaddr
internally as it has the port numbers built in.
Change-Id: Idb1c87afa956dfe55dc8d533d867fa7845545b12
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
No need to print debug prints if debugging is not activated.
Change-Id: I42a6453b4f3e11106119561b580ebea41e56452d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When checking the IP address from network interface, return
also the used network interface.
Change-Id: If7b8385193da4cb1b469f697e219cfae3b6477dd
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
IPv4/6 functions follows this scheme: net_if_ipv<4/6>_<name>.
Applying that to net_if_set_gw/net_if_set_netmask which are IPv4
functions.
Change-Id: I2dcbb16ce81cfdffbfbb5cae24ad76ddf2b9919a
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Using macros does not let the compiler verifying about the type we are
providing, which usually give an error easier to understand.
Also, this will let the compiler deciding how to actually optimize
(inline or not) the code.
Change-Id: Iba49590b620ef0a1bd0ed5621453524fcfea747c
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Disable IPv6 DAD and ND for IP address test as there is
no need to do neighbor discovery in the test. We also
would like to see network interface debugging and use
dummy L2 driver instead of ethernet one.
Change-Id: Ia9f218c8d4c13afa1482302691d2ef72af4a7b13
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The driver_api pointer was set to NULL and send() pointer
was missing which caused a crash in TX fiber.
Change-Id: I7204c975691476dd9ab2c61bfd11b7664343e47c
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
ARP is IPv4 only so no need to have IPv6 functionality.
Change-Id: Ie70242f5763ba4945c311898643414851f7e8660
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
These tests will verify that we can successfully insert
some space in front of the net_buf fragment chain.
Change-Id: Idf52ed56c52d66268783fb4fecd44b70fc852734
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The driver_api pointer was set to NULL which will cause
a crash in TX fiber.
Change-Id: If1c9a1e44904970f3a0019741eaaad4bf62d2c73
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The tests will make sure net_nbuf_copy() works as expected.
Change-Id: I48dc3b794c70ec4d6436feb76508952c88bbf09b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The ARP unit test is not able to pass packets between fiber
and task. Because of this the test is run from fiber.
Change-Id: I1825a0abdc1b04a78de76d58425f4d2a2ce26ab7
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The ARP packet header contained ethernet header. This is very
confusing so separate the link layer header. Fixed also the
unit tests to run properly.
Change-Id: I8b00bde280ad9f49494766370acb2a8e9cade033
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Now uses net_nbuf_ll() to point to link layer header.
Also the ARP req test passes properly.
Change-Id: If649ff19a064490bff33d03b4ce70ef11bfa7cd5
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of using hard coded net_if, get the default network
interface using net_if_get_default() function.
Change-Id: I6248555ce57ae5196adea7baa9db325660a71255
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Right now there are tests for IP packet checksum calculation.
Change-Id: I1e9e72d01d4690728269c4484f8628350cf95729
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
These tests will check that caller is able to set IPv4 address
to a network interface and check if an address is one of the
assigned to a network interface.
Change-Id: I8aa748c40fbc02eef50ccf76d10a0057ef29021b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Tests have issues right now so these will be activated later.
Change-Id: Ib5549f9ed5600a20b2cfddbddcde8e7f7b297eef
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
User should use the net_nbuf API that is supporting a concept
of RX, TX and DATA buffers, instead of using directly the net_buf
low level API.
Change-Id: I3b8f5f13cd37d42d2322a58b35573e117d520c54
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Having CONFIG_ASSERT=y and CONFIG_DEBUG=y was causing these tests to
overflow their stacks and crash.
Change-Id: Ibcd57abe044a2203d1a954a4c5755218af48f302
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Tag all legacy kernel tests and samples as such.
Change-Id: I43b24acb71c282ed14ff6e6ef06c9542bad86f6a
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Legacy FIFO operations were failing and thus the TC was failing to run.
Stop using k_fifo_get() for allocation and use a bitmap allocator. A
couple of the bitmap operations should be moved to a common header
once ZEP-1347 is completed.
Passes on all arches and boards, whitelist removed; ARM excluded
though due to missing bitfield implementation as per ZEP-82.
Note there is a false checkpatch positive in the decl of
sys_bitfield_find_first_clear().
Change-Id: I1d3ce8e988bf799573041026e419e3946d153590
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
snprintf() implements the ability to foce a negative value through the
(unsigned) size_t len parameter to allow the formatter to use a
maximum size string.
This is point less, we don't have as much memory and this is a recipe
for all kinds of vulnerabilities.
Kill the whole thing, the testcase it represents and thank Coverity
for finding this thing. Whatever use it had before, it has no more.
Change-Id: If422246548664699d8aa328a1b9304ef13cab7ea
Coverity-ID: 131625
Coverity-ID: 131626
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
This patch provides a test that verifies the correct functionality of
CONFIG_RUNTIME_NMI at build time.
Change-Id: I92c8af78d327f6f2b8b87573dbf132068ff80a45
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
This adds basic support for width modifier when printing integers.
Supported specifiers are u,i,d,x,X. Width '*' is not supported.
Flag '0' for left-pading number with zero is also supported.
examples:
printk("0x%x 0x%02x 0x%04x 0x%08x\n", 1, 1, 1, 1);
0x1 0x01 0x0001 0x00000001
printk("0x%x 0x%2x 0x%4x 0x%8x\n", 1, 1, 1, 1);
0x1 0x 1 0x 1 0x 1
This should make printk usable for pretty printing u8 and u16 integers.
Change-Id: I58fa869e9c295a052f97fbf052291ef4d132811e
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
This commit updates the pinmux test case application
to match with the hello_world sample app.
Change-Id: I86f459062527b7e2831bd7a3dfaf6bf8b28ef132
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Remove nano kernel references found at the README file.
Change-Id: Ib71a9a2900a5cb02a3b6038f74e51e5f860792be
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
The app passes the index into an array storing power states
instead of the power state to _sys_soc_power_state_post_ops
Jira: ZEP-1341
Change-Id: I6ddf0a2dbadfd06aafbcafa88be7441e99694a51
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Enable this option to test any usage of structs and variables inside
macros.
Change-Id: I6ec64fb865e87fc0771ae10f0c4eb63f6144c88a
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The divide-by-zero test was using an uninitialized variable that
Coverity was unhappy about. Simple fix to just initialize to any non
zero value.
Change-Id: I9e5865a99e7a8eb3ee52421cc3dcb6717dca1ad1
Coverity-ID: 152053
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Coverity complained about the use of strncpy() to fill up a buffer of
size N with a string of the same size didn't leave room for the final
\0.
This is a valid concern; however, the usage is valid too, as the
writer intended to create a pattern that later can be tested--addind a
\0 would break the pattern.
So instead, use memcpy() for the same function.
Change-Id: If52d02ce41731348f4a2d750c79f9e1c51f3afcf
Coverity-ID: 151947
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Coverity complains about using an uninitialized variable; there is no
reason to do so; thus fixed to avoid maintaining a whitelist.
Change-Id: I657f9e7d46b1b9b091e36638c1951b93903fbec3
Coverity-ID: 152048
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
This is not a strictly necessary initialization, as the data is not
used, but will keep Coverity happy. It being a testcase, there are no
size or speed penalties to the overall kernel and avoids having to
manage a whitelist for an issue in scanning tools.
Change-Id: I0ddcf43ca1114356d58f93de57232864246ffe07
Coverity-ID: 152052
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Coverity complained about the code using an uninitialized chunk of
memory; harmless, but fixed to avoid having to whitelist.
Change-Id: I5c890ff78fab2799b882b8e4a25c15476702d132
Coverity-ID: 152049
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Those tests are now build with unified kernel.
Change-Id: Idbc42bb77060cea0130d62cccdf2e40aeee89128
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Coverity detected some constant value in the vars, due to the
exclusive config select in the code.
Change-Id: Id27b658f3cd70dce626fef054457a9c726b3b957
CID: 151974, 151972 and 151971
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
This commit fixes some style issues detected by checkpatch:
- Lines over 80 characters
- Comment block
Furthermore test legends are homogenized.
Change-Id: If92bbbdcf915164da945a60c8bcdbb7452ad0da0
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This commit fixes an issue in the test_ccm_mode.c file:
sizeof(data) is used to compute the length of the array pointed to
by the 'uint8_t *data' pointer.
At the same function scope, there is a variable (dlen) that already
specifies the required length, so we use that variable instead of
the 'sizeof' function call.
This issue was not reported by Coverity, although is worth to fix it.
Change-Id: I27cbf8c7000a4189a42d193f6445996d4b852aa6
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This commit fixes the dead code issue reported by Coverity.
Coverity-CID: 151977
Change-Id: Iaa31c032456f48e1af1d1c9d722f051ac5519ccf
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This commit fixes the dead code issue reported by Coverity.
Coverity-CID: 151975
Change-Id: I449341d1f540abe149e8ad9197a64d52cd5722cd
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This commit replaces spaces by tabs in the TinyCrypt AES test.
Three 'space required before the open brace' issues are also
fixed by this commit.
Change-Id: I27e961484899873a25847452d569b50322dba74d
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This commit solves some style issues found in comment blocks.
Change-Id: I1f4f7344e33b5898ac7d1fb2cd13d75946b4ee5e
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This commit moves variable declarations at the beginning of the test
routines.
Change-Id: Id1382b64aad4130e9a939c5e51301b75c6958fe5
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This commit removes the declaration of a data type inside the tests
3 & 4. The new data type 'struct kat_table' is declared at the
beginning of the file.
Change-Id: I7662cd164a865fe0e70f984b9b494d96b4a72af9
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This fixes a string overflow past the end of a buffer
which was reported by coverity.
Coverity-CID: 152044
Change-Id: I5b331135e338fa43b5589a9488b06367e8cad5a7
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
A popular issue "format is not a string literally" was
caught by LLVM. Let's make it a string literally.
Jira: ZEP-1179
Change-Id: I2b4a5aef750b772504bf0e6f005dab2ff9ac3e7c
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Add function return value check. This was caught by
Coverity.
Coverity-CID: 151950
Change-Id: Iee550e15d124f05f0b0514fdad22d06c617beac2
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
This commit solves some style issues found at the
tests/include/test_utils.h file:
- Lines over 80 characters
- Unused arguments
- Missing {} in if-else
Change-Id: Ifaee81ec7c57a250b2c368b2efda38dc69d02c81
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This issue was reported by Coverity (CID 151952)
Change-Id: I59a20a3ccbe606ef634db98ac6cc6889a3973ec3
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
testcase.ini was not building for ARC. This app would
run on x86 and arc.
Change-Id: I961d56079aa1db7d84e0fcc87780ba11d7f4d831
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
The variable type mismatching was caught by LLVM.
Jira: ZEP-1179
Change-Id: I37934ef2ee47c521a78086564876843794688d55
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
By default, when a 'fatal fault' message is seen in the output of any
testcase, it is consider an inmediate fatal condition and the test case
is aborted.
However, in all such cases, the testcase is provoking the situation to
verify the condition is caught. In this case it shall NOT be considered
a fatal fault and the default overriden to allow it to proceed.
Change-Id: Id4e9138e5f0fcb8cd77efbb1831897fb0946ba20
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
This TC is only exercising the API, as we don't have a feedback loop
mechanism to verify whichever values are fed to the ADC.
Fixed the loop to complete after 10 runs; on each run, print the
values and actually report the difference between them. With no inputs
connected (aka: floating), they should be reporting noise relatively
close to the previous reading, so we might want to use this delta as a
testing pattern (assert if the delta is higher than some value, but
I've seen variations as high as 40M units). For now, the test is just
happy with being able to read them.
The buffer has been re-typed to uint32_t so we can iterate over it
without casting tricks -- it requires then only a single cast when
initializing sample.buffer (which shall be a void* anyway).
Duplicated the buffer, so we can flip/flop between two buffers to
compare against the entries read in the previous run.
v4: fixed missed warnings
Change-Id: If6b48b92231007202d74f5c042f6d0cf3fdcb60a
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
This test case just exercises the PCI enumeration and there is no real
way to test success/failure other than running it and the kernel not
crashing.
Moved to ztest.
Retag so it is actually ran on QEMU/x86 and galileo once we deploy in
the HW pool. Note this means that we need to force CONFIG_PCI on
Qemu/x86, which can run this testcase.
Change-Id: I85b64800f7d989357927b4a25777041047293b34
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Move away from legacy APIs and use unified kenrel instead.
Change-Id: Icae86beec66df1b041405cbe3455913630fc8ad1
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Switch left-over usage of TICKS_NONE and TICKS_UNLIMITED to the new
unified kernel counterparts K_NO_WAIT and K_FOREVER.
Change-Id: I2f2a16360e816f9f8791eb216deb3c70b8cc87df
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There was a lot of duplication between architectures for the definition
of threads and the "nanokernel" guts. These have been consolidated.
Now, a common file kernel/unified/include/kernel_structs.h holds the
common definitions. Architectures provide two files to complement it:
kernel_arch_data.h and kernel_arch_func.h. The first one contains at
least the struct _thread_arch and struct _kernel_arch data structures,
as well as the struct _callee_saved and struct _caller_saved register
layouts. The second file contains anything that needs what is provided
by the common stuff in kernel_structs.h. Those two files are only meant
to be included in kernel_structs.h in very specific locations.
The thread data structure has been separated into three major parts:
common struct _thread_base and struct k_thread, and arch-specific struct
_thread_arch. The first and third ones are included in the second.
The struct s_NANO data structure has been split into two: common struct
_kernel and arch-specific struct _kernel_arch. The latter is included in
the former.
Offsets files have also changed: nano_offsets.h has been renamed
kernel_offsets.h and is still included by the arch-specific offsets.c.
Also, since the thread and kernel data structures are now made of
sub-structures, offsets have to be added to make up the full offset.
Some of these additions have been consolidated in shorter symbols,
available from kernel/unified/include/offsets_short.h, which includes an
arch-specific offsets_arch_short.h. Most of the code include
offsets_short.h now instead of offsets.h.
Change-Id: I084645cb7e6db8db69aeaaf162963fe157045d5a
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The unified kernel is now the only supported kernel, so this
option is unnessary. Eliminating this option also enables
the removal of some legacy code that is no longer required.
Change-Id: Ibfc339d643c8de16a2ed2009c9b468848b8b4972
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
tests: power_states app updated to support SoCWatch collection
Add CONFIG_SOC_WATCH option for enabling the SoCWatch
QMSI driver and associated instrumentation hooks.
Bug fix for soc_watch.c to use local irq_lock/unlock
This will be put into QMSI as well.
JIRA: ZEP-1121
Change-Id: I0514324e81ca02c1d01ffc2d6cf4d31aee491544
Signed-off-by: Jon Moeller <jon.moeller@intel.com>
This test does not work for cortex-m0+ yet, so make
it run only on m3/m4 for now.
Change-Id: I0a90335d264cf88f3a62057860d6f129085c558f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
convert all sensor drivers to use threads and the unified kernel API and
remove all legacy APIs.
Change-Id: Ica43ea74ecbbf85273f718f182c413a9dcd8abc6
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The API to disable _sys_soc_resume notification is currently
called _sys_soc_disable_wake_event_notification. This is
misleading because it is possible that the ISR from which
_sys_soc_resume is called could be from a different interrupt
with higher priority that happened before interrupts were
enabled. More accurately, it is a notification of exit from
kernel idling after pm operations.
Jira: ZEP-1271
Change-Id: I83747f2cacac1bc17f135d12f4aa4478970fc02d
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
This test is not a kernel object test and does not use any legacy kernel APIs,
so declare it non-legacy.
Change-Id: I430ac296334dbb8ff2b2d6576f7007a5dcc6f546
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Convert fiber_start to k_thread_spawn and nano_fiber_fifo_put to
k_fifo_put.
Change-Id: If1ec405ec602e28a538f4c9569ede87519346559
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Use defines from k_fifo intead of legacy API.
Change-Id: Ib8cf0d88240ef145da550b8cf83d2580e7140521
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Only net_receive() is using non-special value for net_buf_get_timeout
so this change is included here. Other users are using special values
which are already correctly handling ticks vs ms change.
Change-Id: Ib12d34ac5a546b36fa7b35615f082c82a256bd07
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Use new sleep API or remove sleeps where not needed.
Change-Id: I88c0973e57eb4970b68b3f4fa428683191b1a7f0
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This can be used to initiate an outgoing connection
Syntax:
>br-rfcomm-connect <channel>
Change-Id: I7ac7aeb61e7ae7e3f55c7cd7e815bdb604b27fb3
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Restructure the Bluetooth options more logically.
- Both host and controller are now behind the same high level
CONFIG_BLUETOOTH.
- Selecting controller support disables other HCI driver selection, so
the controller isn't in the same list as HCI drivers any more.
- Under the top-level there's a "Custom stack" option, which when
enabled opens up the option of choosing CONFIG_NBLE.
There are various other cleanups and simplifications in this patch as
well, since splitting these up would have been fairly tricky while
making sure all test cases still build.
Change-Id: I5bb715cb9d20201cb8b72fbd149c8a09a4b2d7d2
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add Low Power States support to the power shim layer
and show the usage in the quark_se sample.
States are defined as follow:
- SYS_POWER_STATE_CPU_LPS: SS2 with LPSS enabled
- SYS_POWER_STATE_CPU_LPS_1: SS2 with LPSS disabled
- SYS_POWER_STATE_CPU_LPS_2: SS1 with LPSS disabled
Jira: ZEP-994
Change-Id: Ie4b93f6e539cb53fc035be00280b66b2cb0d9fea
Signed-off-by: Julien Delayen <julien.delayen@intel.com>
Leave the aon counter in running state after the test.
Arduino 101 loader assumes the counter is running.
Stopping the counter will cause the next app to
not start without a hard reset or power cycle.
Jira: ZEP-961
Change-Id: Ia88f0c642b1df8dc5e2b1ee6c55ff0618b6127d0
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Debug setting is using another mdef file that was no changed by
commit 5b1b2d6123
Change-Id: I406b45e37a112352c88629cf7d494c70784930aa
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
Otherwise, local settings in the account will cause headache and
randomly alter the result of the testcase.
Change-Id: I758966a7fe9335a13ce237aea7d6df2ddc5733ce
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Reorganize the code tree so no forward declarations are needed
(basically, move main() to the bottom).
Retag as not build only so it can be run on Quark*
Convert to actually verify counter readouts are increasing /
decreasing over busy empty loops and the alarm is being called.
Change-Id: I746efe595b8d1ac4471dccc2e87f8b36f5cc8ebe
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
sanitycheck already sets this and we need to allow deprecation
warnings.
Change-Id: I3d6bf652403bcbdba47663c8cd0d17682a8a842d
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add an Arduino 101-specific configuration that enables flash-based
storage support as well as the file system shell.
Change-Id: Ic10ea958dd2446df4942a8dfd3cce1e3368852b2
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Implement a new "clear" command to exercise the bt_storage API. The
command can either take an address parameter to clear storage for a
specific device, or, if called with the parameter "all", to clear the
entire storage.
Jira: ZEP-181
Change-Id: I1ebd17033f2062951abeeb7d7c448a34a3672577
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This patch removes "FAT" from files names, config names and
symbol names so as to avoid confusion, when other modules use
them in a more generic way.
Also flash_disk_access.c and ram_disk_access.c now exports generic
disk_access symbols as defined in include/disk_access.h rather
than FAT specific ones in fs/fat_diskio.h. Thus modules like
USB which need to use disk_access interface is not dependent
on symbols from ELMChan FAT module. Also fat_diskio.h
is removed.
Further the shim between ELM chan and Zephyr is modified as
per these changes.
Change-Id: Ifd80f14a629e467ee9c7a9aaff8a4896eed11982
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
This TC cover dma transfer with different channel and burst length
It support 2 ways to execute
*) full-auto: by default, it run all sub test cases defined in array
once flashing done and reset.
*) interactive: when CONFIG_CONFIG_CONSOLE_HANDLER_SHELL=y, it go into
shell first, user can input test command one by one for debugging.
move original test under drivers/dma to test_loop_transfer/
Change-Id: I7e78b730592c80bf2c23b20c8b0eb65a9b353acd
Signed-off-by: jing wang <jing.j.wang@intel.com>
The main task uses stack-hungry() printf(), and the switch to the unified
kernel pushed the necessary space over the edge.
Change-Id: I7b64e7f09d91c5050ffe7fb18506ff24289169fc
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
For systems that have both high base (CPU, bus, etc.) frequency and
small divider of the base frequency for system clock and this way,
do not allow 1 second period for the system clock, set the system
clock period to 0.1.
Change-Id: Iafb4604112d4adb8430f8bf57a5a31de3f6cf91d
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Since the mutex can not be unlocked if it is not locked, fix the test
and make sure that it unlocks the timer exactly same times as it locked
it before.
Change-Id: Ie29d308b789ed00f4fd3cf2faef3aa1f4bc89e3e
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
The SPI_0_CS_GPIO and SPI_0_CS_GPIO_PIN values were defaulting to
something not very usable, because of which e.g. the file system
test app was having to explicitly set the right values in its sample
configuration. Having a proper defaults in the board defconfig means
this isn't needed anymore.
Change-Id: I1399914451c1616588322e25304d40d3dd1151e7
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Test was not completing on CONFIG_DEBUG=y setting, current filter
sets custom stack size for such setting
Jira: ZEP-1203
Change-Id: I3a6ada88bc2e8a1fee757773c4b19b72551926a7
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
We the unified kernel now sizes have gone up and we have some more
testcases that are RAM limited on small memory systems.
Change-Id: I4716a779fac86a420607ba716edd012976d14254
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Commit 4187822d08 removed some filters
at sanitycheck script that were previously preventing foot print test
to run on board quark_d2000_crb.
Added filter excludes such board from min and reg footprint tests.
Change-Id: I2a32e34b1af6d16b3da418cd3113c52b2369eb97
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
Making a reference to the common work queue code should not necessarily
drag in the system workqueue, since it is possible to use a workqueue
that is not the system workqueue. This is done by moving the system
workqueue into its own code module.
Moving the system workqueue to its own code module allows removing the
NANO_WORKQUEUE and SYSTEM_WORKQUEUE kconfig options, and compiling the
common workqueue code and system workqueue all the time. They are only
linked in the final image if a reference to them exist, same as the
other kernel modules.
Change-Id: I6f48d2542bda24f4702e7c2e317818dd082b3c11
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This increases number of available L2CAP channels for the test purposes.
This is needed for TC_COS_CFC_BV_05_C test case.
Change-Id: I5df099fb64632e1a0e557852ca55ee45a9cc89ed
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This fixes configuration file name in testcase.ini file.
Change-Id: I6496f98694415bfc3a76308aa9ee6dfd008e1691
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This updates README as well as makefile to choose Zephyr BLE firmware
configuration as a default one.
Closes: ZEP-1187
Change-Id: I78dec2a4e2b5bfe634a8b7b8897d4f6ab6b37b44
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This adds sample configuration file for tester application that
supports controllers with Zephyr-based BLE firmware.
Change-Id: I8b63f93d1395837b8485aba7060b6626be1daab1
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
The README files provided with the samples contain references to NBLE,
which is not a publicly supported solution for Bluetooth. Simply
remove these files. If the need arises to provide application-specific
information in the future we can add back per-application README
files.
Jira: ZEP-1183
Change-Id: I81b3ea5491d50fb16062ccd5a421ddc8fcb7ea42
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Remove those from Makefiles and testcase.ini, we now support unified kernel
only and sanitycheck script now knows how to deal with this.
Change-Id: I853ebcadfa7b56a4de5737d95f2ba096babb2e13
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Test tests/kernel/test_xip does not fit FLASH region of new platform
cc3200_launchxl that was added by commit 10ea5d0, hence it must be
excluded from such test so daily sanitycheck script completes
successfully.
Jira: ZEP-1201
Change-Id: I01ec2b9af45e34934d91922bd749a83f305746b1
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
The test relies on the workq thread being in the system. It is possible
for the workq to not be in the system even if CONFIG_SYSTEM_WORKQUEUE is
enabled, if nothing makes references to the symbols in the object file,
so we cannot rely on the kconfig option to know if the system workq
thread is in the system or not. So, force it in.
Change-Id: I1ae2613fbd32928b673fc4c74a9dc56502255763
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Port the power management test app to use unified kernel.
Change-Id: I2f10748be5ca7d9792f6e97c35f5f2aabab769e7
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
QMSI 1.3 natively supports restoring the SoC and peripherals
after sleep.
The Zephyr Power Management shim layer is updated
in order to support QMSI functions.
The following functions have been added:
void _sys_soc_set_power_state(enum power_state);
void _sys_soc_power_state_post_ops(void);
In order to fully support deep sleep, the function
_sys_soc_set_power_state now support saving and
restoring CPU context and returns to the application.
_sys_soc_set_power_state function also abstracts
QMSI cpu states and enable the application to choose
between C1/C2 or C2LP states.
The QMSI power states are mapped as follows:
SYS_SOC_POWER_STATE_CPU_LPS -> power_cpu_c2lp
SYS_SOC_POWER_STATE_CPU_LPS_1 -> power_cpu_c2
SYS_SOC_POWER_STATE_CPU_LPS_2 -> power_cpu_c1
SYS_SOC_POWER_STATE_DEEP_SLEEP -> power_soc_deep_sleep
SYS_SOC_POWER_STATE_DEEP_SLEEP_1 -> power_soc_sleep
The following functions have been removed:
void _sys_soc_set_power_policy(uint32_t pm_policy);
int _sys_soc_get_power_policy(void);
FUNC_NORETURN void _sys_soc_put_deep_sleep(void);
void _sys_soc_put_low_power_state(void);
void _sys_soc_deep_sleep_post_ops(void);
Those changes are propagated to the samples.
All calls to QMSI are removed.
Jira: ZEP-1045, ZEP-993, ZEP-1047
Change-Id: I26822727985b63be0a310cc3590a3e71b8e72c8c
Signed-off-by: Julien Delayen <julien.delayen@intel.com>
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
These testcases can't build on common platforms with 16K or less of
memory.
Change-Id: Iade2aa423f42a1f174a5ebb5d183b362917f503e
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Not all platforms enable CONFIG_PRINTK so lets only test if its enabled
Change-Id: I0fc83e21b4be1ff0e8fef94e66793a0b725a3db2
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
QD2000, for example, can't run this.
Change-Id: I86c7ca22e4724844ffc5e64329063baf762470c9
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
This test is checking for the wrong results and testing for broken/missing
feature that is actually working.
Jira: ZEP-1124
Change-Id: I7b5f87ac7b47e33e7bbcd4d3967b289f6631cb37
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Microkernel and nanokernel versions of the test now use distinct
sets of source files. This eliminates the dependency on the
MICROKERNEL and NANOKERNEL configuration options, which the
unified kernel doesn't set correctly in all cases.
Change-Id: I59e1d4a73265a433f526d030d2fd04d4b8de1973
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Some HW needs longet timeouts for this TC to complete succesfully.
Change-Id: If6cd4ad93b6e15293f1f8d8e606e159271f0e4d1
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
ztest execute syncronization depends on sem take and give
between TC. Current issues are
*) test execution go to next one before current TC finish
*) one TC failure will block whole testing.
Fix this issue by move k_sem_take from init_testing to
run_test and add k_sem_give in run_test_fail.
Meanwhile, set init sem value range from 0 to 1
Issue: ZEP-1164
Change-Id: I7b2d38501d0965455a71863a4729ee81472a63ec
Signed-off-by: jing wang <jing.j.wang@intel.com>
As we transition to the unified kernel, we need to check on there
being enough memory in said case (nano kernel always had it based on
higher granularity filtering with 'kernel = nano').
Change-Id: Ie21aea2773feb9337d8d34dcf45858e4df879469
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
When running in real HW, testcases take more time to execute than the
default 60s. 200s seems to work for all HW types as of this commit
(FRDM k64f, Arduino Due, Arduino 101 / x86, EMSK 9d).
Change-Id: I663a67161bd7b4c349a483efb8e9cbf14c09421c
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Ability to use Zephyr shell by multiple modules simultaneously, each
module for its own usage.
Old shell implementation enabled the user to call only one module
commands, not all of the modules simultaneously.
Change-Id: I0ef8fa2fd190b7490c44fe91d1016363258302c9
Signed-off-by: Yael Avramovich <yael.avramovich@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Not completely ported to V2 APIs yet, but enough that we pull in
all the kernel.h APIs for the microkernel test, bypassing the legacy
layer.
We pull in a lot more than the legacy test did, so results are not
directly comparable.
Change-Id: I35e74bfd1aa15ee59951f68fb7dd8d811619c3f8
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Nanokernel part of the latency_measure test is a subset of the
microkekernel tests. For unified kernel there is no reason to
have nanokernel test - for unified kernel we have to run whole
the set of tests.
Change-Id: Ief176fd9d25e7355e3d3697c3bbc1e953b16655c
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
The unified kernel doesn't use the KERNEL_ENTRY() mechanism,
it doesn't do kernel calls in a special context. So there's
no reason to test this on the unified kernel and we can omit it.
Change-Id: I2b8aa2495385a39130e9b87c0d0324f2f205a2c8
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This adds support for setting the minimun required security level to
l2cap_register command:
l2cap-register <psm> [sec_level]
Note that entering the security level is optional and the default is
BT_SECURITY_LOW(1).
Change-Id: Ib6dea92919357f41fe2f4de3050b9a10a7f553d6
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This header file is not intended for applications, rather than for
drivers, so move it to the appropriate place.
Change-Id: I7ff8158418e7e839b538c6cccbb32f3af43c12c6
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
These options were only needed for a MyNewt-based nRF51 firmware on
these boards (the MyNewt BLE stack is called Nimble, hence the
prj_nimble.conf sample config files). With a Zephyr-based nRF51
firmware these options are no-longer needed, so it's not appropriate
to have them default to enabled. Instead, if they are needed, require
the app-specific configuration to enable them.
Change-Id: Iefbee4d97590af4e11bcedea05fe61f32a147b83
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
These are using old kernel APIs and need to be converted.
Change-Id: I7457270fb5e93e290023756316e82a384712e82b
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
As we transition to the unified kernel, we need to check on there
being enough memory in said case (nano kernel always had it based on
higher granularity filtering with 'kernel = nano').
Change-Id: Ic36c352f06be09407cd3aac74a1dfe73bb2fc61d
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
This code is part of the infrastructure, it does not test any features really.
We are wasting cycles on a stub that does basically nothing.
Change-Id: I130f320d1b365abdac118e5c44b80fd866e5f502
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We have many tests that are being built as stand-alone binaries for no good
reason. Those can be put in one single test to speed up testing and CI
verification.
Currently we do support the following in test_common:
- byteorder
- printk
- intmath
- slist
- atomic
- ring_buf
In addition, the test now uses the ztest framework.
Change-Id: I656ac7f4acf48b7de4ec81c9f5dafc9dea3da911
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Tests that do not use any of the legacy kernel APIs can be moved to unified
kernel to avoid double testing.
Change-Id: Ic2353feb23ee20d9d93f5459432d3b3739df8e03
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move all kernel tests using legacy APIs into tests/legacy to continue testing
old APIs and compatibility. We keep in tests/kernel those tests that do not use
any kernel APIs and generic in nature, those should not be affected by the
unified kernel API change.
In tests/kernel we will start adding tests that are unified kernel only. Later
and when deprecation period is over the legacy tests would be dropped.
Change-Id: Icc7d8c7e5f2af65af350b75da3117f72396925f4
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
As unified kernel starts main() application function, remove test
thread.
Remove nanokernel part of the test since their code base is
identical.
Change-Id: I2afb4c0da2d139b159c89186166afdb5d9813d61
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Currently the net/buf test fails on quark_d2000_crb due to RAM
overflow:
region `RAM' overflowed by 2256 bytes
Change-Id: I854960a3c22c7318f5f5e9341ca7aaaf8743d30d
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The net_buf_unref() API will unref all associated fragments, so it's
wrong to assume that no fragment destroy callbacks would be called
when the head buf is unreffed. Instead the right expectation is that
all fragments get unrefed as well.
Change-Id: I00530e4c1cfa5dddbfcbeab9609347873010ff4d
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
ztest was not working with unified kernel and v1 APIs and not many tests are
using ztest right now, so instead of making it work with old APIs, convert it
to unified kernel completely so that new tests written using ztest would be
unified kenrel based.
Change-Id: Ibfcc7783dcb266abbd388662ba61c4b55d32b10c
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Enables boot time timestamps for unified kernel.
Also Splits the source code into microkernel and nanokernel versions
instead of having common code. Not only does this make the code for
each project easier to read, but it also easily allows the nanokernel
version to link against the correct version of main().
Change-Id: Ie0afa2272c3347ebdacc0e3daeebbfe9583fe596
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The convention everywhere else in the tree is to use 'fs' for file
system related code (e.g. subsys/fs and include/fs) so follow this
also for the tests.
Change-Id: I32b9918cbba95e7b219c2d9f3e3a079e664390ab
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The namespace allocated for the filesystem API is fs_* and FS_*. That
means all symbols and defines should adhere to it.
Jira: ZEP-1155
Change-Id: I422310448b7c7c347f621aea6d7b1d97ef25c94d
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The combined controller & host build takes up too much RAM for the
16kB arduino_101_ble target, so limit it to the 32kB nRF52 & nRF51
DevKits.
Change-Id: Ib9d04765697b7f5c748633cb6244474d92f96995
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Calling TC_END_REPORT(complex_expression) might have side effects when
complex_expression is later put inside (result == TC_PASS? A : B)
evaluation, because result will be replaced verbatim.
To avoid operator assignment order changing things, protect
replacement of result by adding parenthesis.
Change-Id: I8fd07d97d4b49b4cd48a1c6ad345bf49fb2537b5
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
This makes all Bluetooth samples and tests being build with unified
kernel. main() is now executed from init thread and specifying task
for it in mdef file is no longer needed. By default main stack is
1024 bytes and this should be enough for BT samples.
Change-Id: I6674eea2c028b78ada5190acef72937186738af2
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
The bt_driver API was created when Zephyr only had a Bluetooth host
stack, but no controller-side functionality. The only "driver" that
was needed for the host was the HCI driver, and hence "HCI" was
omitted from the name.
With support both for host and controller Zephyr will be getting more
Bluetooth driver types, in particular radio drivers. To prepare for
this, move all HCI drivers to drivers/bluetooth/hci/ and rename the
bt_driver API bt_hci_driver.
Change-Id: I82829da80aa61f26c2bb2005380f1e88d069ac7d
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
CONFIG_ARC_INIT defaults to 'n' now days so there's no reason to try
to explicitly disable it in the sample config files.
Change-Id: I88df06ba23bdac697f0767384f7b88e3bd9fced9
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Lets not confuse user with this code, it is clearly not a sample.
Change-Id: I3a0209fb34b2c97383b0f5382f156b80470fdaf7
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
They were the same, standardize on the lowercase one.
Change-Id: I8bca080e45f3e0970697d4451e468b9081f96f5f
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Unified kernel invokes main() function in the init thread. This
eliminates the need for a separate thread for the test.
Change-Id: I4ff2e160213d152ca7c5d8422162f3464d935119
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Unified kernel invokes main() function in the init thread. This
eliminates the need for a separate thread for the test.
Change-Id: I4e6c4f212615d2135adf7971df32db1ad392c0e2
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
According to feedback received in ZEP-1130, decreasing the stack
size in the prj.mdef file solves the RAM overflow issue reported
by ISSM.
Jira: ZEP-1130
Change-Id: I761531e535a9e54ccd024b397d5d92d7666be817
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
The wrong tag name was used to mark the test as compatible
with the unified kernel.
Change-Id: Idda5d5e0993447270e7131c42c224df8dcd59282
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Microkernel and nanokernel tests now use customized source code
to eliminate use of MICROKERNEL and NANOKERNEL config options.
Change-Id: I7f9aff4729a7a257c4a0a0f5939ba0f5525af460
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Enhances the microkernel memory pool test application to
include tests for dynamic memory allocation and freeing
from the heap memory pool using kernel APIs that behave
like malloc() and free().
This enhancement works under both the microkernel and
unified kernel.
Change-Id: Ibc485877ea9d60307edb8f93c54a0b94ebacb017
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Drop the _m3 from the test name since this can run on M0, M3, M4, etc.
Change-Id: Ia12ece62fc7b42e28f37e191c90c0dead48d40d0
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The build_all tests contain an ever growing list of device drivers to
build. Ideally we minimize the number of images we build, but we
already observe that some of the tests, notably sensors, is too big
for some of our supported boards.
Rather disable an ever growing list of boards as the build_all tests
get bigger it would be better to split the tests into smaller chunks
that can reasonably be expected to run on any supported board.
We split the sensor test set into two, the division is arbitrary,
based on the name of the driver. This allows us to remove the filter
on the quark_d2000.
The current split into two groups is arbirary, in the future it is
inevitable that as the list of supported drivers grows, we will need
to further subdivied the larger tests.
Change-Id: If7ee00b3c8e1749c4c827f83d7cbc2feb70e56ad
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
This is used by a test case, and it's better to just put this
here instead of forking the linker scripts.
Change-Id: Ifbb90b73bb26118ae2422cc6feccb3db58a26f2c
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This change shortens the Service Class macro name from
BT_SDP_*_SVCLASS_ID to BT_SDP_*_SVCLASS
Change-Id: I1150baae24428c6b76f005d11003291016e0a03e
Signed-off-by: Kaustav Dey Biswas <kaustav.d.biswas@intel.com>
This change adds SPP as a sample SDP service during RFCOMM
server registration. The SPP channel is now used as the
fixed channel for RFCOMM register command.
Change-Id: I3b5ad3995725adca55db1497d4a35099f6311f3b
Signed-off-by: Kaustav Dey Biswas <kaustav.d.biswas@intel.com>
This way the application can reuse the same callback for multiple CCC
since it can track what CCC is affect by checking the attribute pointer.
Change-Id: I608da643aea07de26b65d67e6db3268d717d0f53
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Provides users with a more compact and intuitive API for kernel
timers.
Provides legacy support for microkernel timers and nanokernel
timers by building on the new kernel timer infrastructure.
Each timer type requires only a small amount of additional
wrapper code, as well as the addition of a single pointer
field to the underlying timer structure, all of which will be
easily removed when support for the legacy APIs is discontinued.
Change-Id: I282dfaf1ed08681703baabf21e4dbc3516ee7463
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
In order to print the proper strings that the test case execution
frameworks expect, use the macros defined in tc_util.h.
Change-Id: I841c5454fbcf4f679e6285538e838f039442b1f8
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
When running sanity with asserts turned on the following tests don't
fit the ROM region of CONFIG_SOC_QUARK_D2000:
- test_build_sensor_triggers
- test_build_sensors
Added filters prevent these test from being executed when asserts are
on.
Jira: ZEP-1063
Change-Id: Ib046bcb227f4a49b524894aa5aea80debe159aae
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
The k64 pinmux driver can be used for any k64 board, not just frdm_k64f,
therefore renaming the driver accordingly.
Change-Id: I45e96d4a5ff6aa859d0f57fe098e44a8ae5283d1
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This application now executes successfully.
Change-Id: Ib3c2673fd7e8f0ff001a8355b4f7c8ddd808da94
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This testcase was being ran on Quark D2000 because it failed to
identify itself as micro. There is not enough RAM for that.
Properly tag.
Change-Id: I9fd4235f4436b914b89b10616cbed0cfb3e97b40
Jira: ZEP-1014
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
When the debug option is enabled ECC DSA test doesn't have enough stack
space so qemu fails. Adding double stack size for special case of qemu
and CONFIG_DEBUG.
Jira: ZEP-1066
Change-Id: Ib14d853de2b1c755a6171787845433648d61b75b
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
Some of tests/drivers/build_all/ test are failing link step only
when debug is enabled, these filters prevent those tests from being
executed under such configuration.
Jira: ZEP-1063
Change-Id: Ib2ff649794a1d73b133fbf998bbe8143a822c753
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
Some of tests/crypto/test_ecc_dsa test are failing link step only
when debug is enabled, these filters prevent those tests from being
executed under such configuration.
Jira: ZEP-1063
Change-Id: I4b7376c49a401e21c413427918be549934ce03d5
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
Some of tests/bluetooth test are failing link step only when debug
is enabled, these filters prevent those tests from being executed
under such configuration.
Jira: ZEP-1063
Change-Id: I87fa73710d78346b1b2ce587e9055b0732d9cb49
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
Clean up left-overs from this getting fixed first in master.
Change-Id: Ief41ecfdeeb51fbc76f2fe045a412ff1643f69c9
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This implements GAP Unpair command handler used to remove pairing
information.
Change-Id: Ia2e2400ea06b2b904f89ec3ee88527d1ea8f7f38
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This event will be used to inform tester about PTS identity address.
Change-Id: I3d25c69c3fc9a8d8a728497d1dc1d57084373e97
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This moves discovery logic to the tester application.
BTP Start Discovery command flags have been extended with
"Use observation procedure" bit.
For now, Tester can search for devices in limited/general discoverable
mode or those that are broadcasters by setting corresponding flag bits.
Change-Id: I7142e8fdf40a9081787538e433067335d3ee0564
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This test build where BR/EDR SMP support is enabled without
LE central or singing support.
Change-Id: I61bc17e989a5752500a7d29557609d9e54b6006d
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
No other board has BR/EDR support at the moment, and we're too easily
hitting RAM limits on them.
Change-Id: I81c800f979d34bd58f73a34c1038a9327556adb2
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Extend the driver build_all tests to include a test for ethernet
drivers.
Change-Id: I2b01d547001d3fae45cda3bc95a74c35fd75ab2b
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
sys_memcpy_swap() and sys_mem_swap are tested.
Change-Id: Ib7ee9bd5e58a17cb41960c1834510d6643dc8271
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Gets rid of official support for dynamic timer allocation
in the unified kernel, since users can easily define and
initialize timers at any time. Legacy support for dynamic
timers is maintained for backwards compatibility reasons
for the time being ...
Change-Id: I12b3e25914fe11e3886065bee4e96fb96f59b299
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Revises the test to account for changes in LIFO object behavior
in the unified kernel.
Note: A LIFO object shouldn't really be used to try and pass
data items between two different threads in an ordered manner,
as this test is doing. Ordered behavior should only be expected
when a single thread is adding and removing items from a LIFO.
A LIFO is typically used to pass data items between different
threads when ordering doesn't matter -- for example, when using the
LIFO to implement a shared pool of data items that can be allocated
and returned by a bunch of threads. (A LIFO object is more efficient
than a FIFO object for implementing this kind of pool.)
Change-Id: Ic4cbd8b8368477e72c1bf0bca35600b78f963933
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The nanokernel version of this application now uses its own source
files to eliminate its reliance on the build system setting the
CONFIG_MICROKERNEL and CONFIG_NANOKERNEL options correctly
(which the unified kernel build system doesn't do).
Change-Id: Ie7254cce314dc8d55ab325f784bd4f3309329baa
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The nanokernel version of this application now uses its own source
files to eliminate its reliance on the build system setting the
CONFIG_MICROKERNEL and CONFIG_NANOKERNEL options correctly
(which the unified kernel build system doesn't do).
Change-Id: Ief1d90251df62b54a6814e82cb95730088d40d99
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The nanokernel version of this application now uses its own source
file to eliminate its reliance on the build system setting the
CONFIG_MICROKERNEL and CONFIG_NANOKERNEL options correctly
(which the unified kernel build system doesn't do).
Change-Id: Ife27f8172b2be33b95136ccdfa29522c8a6fba0b
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Adjusted thread priorities to lie within the default priority
range for the unified kernel.
Change-Id: I130c60b382a6205c4c41b6f74f77679c87e6dc4d
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Fixes bug with the private definition of the helper task
that incorrectly added task to the EXE task group.
(This is problematic because the regression task also
starts the helper task!)
Revises test code to use legacy kernel types for task id and
task priority values, rather than using "int", since these
types are not necessarily integer values in the unified kernel.
Revises task/thread priorities used by test so they fit within
the unified kernel's default priority range.
Change-Id: I431120e5d1b44c65f423addfff1330f994fed71b
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Updates unified kernel sanity test to include more
applications that are known to work properly.
Change-Id: Ice15bd1034f92269ef6ce9e3cd08599497814bd8
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This also removes sensor and sensor2 tests, both are now included in this
single test.
Additionally, set footprint tag to show foorprint changes in gerrit.
Change-Id: I81a9357052adcc4fd910476e0ffc66bfdbdd3bce
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add another group of sensors tests. Ideally these would be added to
the existing sensor test, however we are at the ROM limit of the
default board, enabling the rest of the bmc150 driver code is
sufficient to break the link. Ideally these build tests would succeed
on as larger group of boards as possible, therefore rather than switch
the default board to something with more ROM it seems more appropriate
to create more, smaller tests.
Moving the current partial bmc150 build test from its current home to
a new test and adding the missing parts of the driver.
This split of sensor tests into multiple groups is arbitrary,
suggestions for a systematic approach welcome.
Change-Id: I4d33bff00e483558c4a8486afb96c1906e2d2281
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
This will help catch build issues with sensors by enabling all sensors
we have into one single application using all supported IOs.
Change-Id: Id8c201b8ae9b74dccc62d6440899ff487ea09d43
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Provide a minimal build test for the lsm9ds0_mfd driver.
Origin: Original.
Change-Id: I5e6015ce2f5998a4c200cf582c39ed91e4e171aa
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
printk format specifier used for size_t (%lu) was not compatible
with llvm because it sees size_t as unsigned int. Using %zu
makes it portable acroos compilers.
Change-Id: If0e732fbaada5f50a975ec912b8147d6b252a2de
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
This ensures ADVTP patches are build tested with debug enabled.
Change-Id: I5c09afea4a9df84b054d2383f0b53ff85fa5dcd5
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This board was recently renamed, but apparently this reference was
left out.
Change-Id: I9789fa45eab6a9b3118f0f0857ef2207311597f3
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This fixes data passed to the BTP Device Found event.
Change-Id: I1ab465b87ce24f3ea10b7217c254aafaee494c91
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This makes sure A2DP support is build tested on each patch.
Change-Id: I9dba5c20d44d8ac92910e80c1ad97ac8d2207652
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes sure AVDTP support is build tested on each patch.
Change-Id: Ia7cf94ca84fa01bd676a99b0df58ac745bbfc8c7
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes sure RFCOMM support is build tested on each patch.
Change-Id: I9cd60da1b0ab0db2b41487393fb59fe1b415ea01
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Binutils ld has an annoying misfeature (apparently a regression from a
few years ago) that alignment directives (and alignment specifiers on
symbols) apply only to the runtime addresses and not, apparently, to
the load address region specified with the "AT>" syntax. The net
result is that by default the LMA output ends up too small for the
addresses generated in RAM. See here for some details:
https://sourceware.org/ml/binutils/2013-06/msg00246.htmlhttps://sourceware.org/ml/binutils/2014-01/msg00350.html
The required workaround/fix is that AFAICT any section which can have
inherit a separate VMA vs. LMA from a previous section must specify an
"ALIGN_WITH_INPUT" attribute. Otherwise the sections will get out of
sync and the XIP data will be wrong at runtime.
No, I don't know why this isn't the default behavior.
A further complexity is that this feature only works as advertised
when the section is declared with the "AT> region" syntax after the
block and not "AT(address)" in the header. If you use the header
syntax (with or without ALIGN_WITH_INPUT), ld appears to DOUBLE-apply
padding and the LMA ends up to big. This is almost certainly a
binutils bug, but it's trivial to work around (and the working syntax
is actually cleaner) so we adjust the usage here.
Note finally that this patch includes an effective reversion of commit
d82e9dd9 ("x86: HACK force alignment for _k_task_list section"), which
was an earlier workaround for what seems to be the same issue.
Jira: ZEP-955
Change-Id: I2accd92901cb61fb546658b87d6752c1cd14de3a
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
If the -C flag is given to sanitycheck, generate gcov files for unit
tests and render them with lcov.
Signed-off-by: Jaakko Hannikainen <jaakko.hannikainen@intel.com>
Change-Id: Ic25eae6a3cfc2c45595bd6aa235df2c483aaf6ec
This simple unit test runs basic sanity checking on buffers from
net_buf_get. It demonstrates the mocking support in a real-world case,
where it is used to remove the dependency to nano_fifo.
Origin: Original
Signed-off-by: Jaakko Hannikainen <jaakko.hannikainen@intel.com>
Change-Id: If2757823bebbc0fa22b3064a432032cdbccdfe2b
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This is a sample how to use the framework in an integration test
environment.
Change-Id: I01619fce06759ed523c8c878e8bbda6d8d87d604
Signed-off-by: Jaakko Hannikainen <jaakko.hannikainen@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
These tests mainly test the stack whether it compiles and runs fine
under normal conditions. They do not test most failure conditions.
Origin: Original
Change-Id: Iaac73511a0664abd84685112b4e526eab3eb5748
Signed-off-by: Jaakko Hannikainen <jaakko.hannikainen@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Origin: Original
Change-Id: I0927c25fbbba5d4863f199d058d311c10d52d784
Signed-off-by: Jaakko Hannikainen <jaakko.hannikainen@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit allows building tests using the ztest framework without
including Zephyr. This can be used to enable unit testing single
functions, even static ones.
Origin: Original
Change-Id: Ib7e84f4bd9bbbf158b9a19edaf6540f28e47259f
Signed-off-by: Jaakko Hannikainen <jaakko.hannikainen@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This framework makes testing in most parts a lot easier, since it gives
an unified base to work with, removing a lot of unnecessary code from
tests. This framework currently features simple assertions and basic
mocking support. The framework works both with and without Zephyr
running, so it can be used for real unit testing.
Origin: Original
Change-Id: I8c5bf2e6b8d6656b6197ee91699b61e730c1cfe3
Signed-off-by: Jaakko Hannikainen <jaakko.hannikainen@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Exception stubs now just push the handler and in some cases a dummy
error code before jumping to the exception handling code, never to
return.
Change-Id: I6a79d9243deb3fc7ccdae003dd0917364c0aa304
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Interrupt stubs now just push the ISR and parameter onto the stack
and jump to the common interrupt code, never to return.
Change-Id: I82543d8148b5c7dfe116c43f41791f852614bb28
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Most apps run fine with static k_timer objects. Don't pay the cost
for the timer pool if no one asks for it.
Also turn off the allocate/free API in the header if it can't possibly
work at runtime as it's an obviously-detectable error that would
otherwise be visible only at runtime.
Change-Id: I492e6e01c4213e3544f707247eea6e4bc601fefd
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Adds tests for the new APIs fs_truncate() and fs_statvfs()
Jira: ZEP-636 ZEP-622 ZEP-635
Change-Id: Ic1c6dfa4e9592a362b67129df389b4b78cc5f250
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
This board is not being used or tested and does not actually
run on any hardware, remove it in favor of well supported boards
for this CPU.
Jira: ZEP-850
Change-Id: I01c825c7eb44d6c321f2ffb88e8899da528921dc
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This board is not being used or tested and does not actually
run on any hardware, remove it in favor of well supported boards
for this CPU.
Jira: ZEP-850
Change-Id: Ied681b6059ad74f9d019054292c919a9f938e7d3
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Linker scripts had not been updated following the addition of
_k_mem_pool sections.
Change-Id: Ic58e893b5296d0f814253e714f8858c272e79913
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Some modifications to the base linker scripts were not propagated.
Change-Id: I73ab016d861779ad7e633ce8602d2e57845bde85
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This header has a bunch of data structure definitions and macros useful
for manipulating segment descriptors on X86. The old IDT_ENTRY defintion
is removed in favor of the new 'struct segment_descriptor' which can be
used for all segment descriptor types and not just IRQ gates.
We also add some inline helper functions for examining segment registers,
descriptor tables, and doing far jumps/calls.
Change-Id: I640879073afa9765d2a214c3fb3c3305fef94b5e
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Threads usings semaphore groups require a larger stack.
Also suppresses warnings in test_sema/microkernel due to Zephyr's
__printf_like() toolchain macro as variable types being printed
have changed between the microkernel and unified kernel.
Change-Id: If7490e0c68c299cc7a45010b9e6db7c01c826a6c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
This commit adds the test-case for the ECC DH algorithm.
Origin: https://github.com/01org/tinycrypt/tree/v0.2.0
The code was refactored to eliminate function calls and checkpatch
errors. Furthermore, the PRNG was replaced by sys_rand32_init.
Refactoring history is available at:
Repo: https://gitlab.com/santes/tinycrypt/tree/refactoring
Commit: f71fc46403e90be0c54a77150e0539756d8314e7
Jira: ZEP-614
Jira: ZEP-861
Change-Id: I884f26ef8e9ff8e79ed0858678c4f51a37796e02
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This commit adds the test-case for the ECC DSA algorithm.
Origin: https://github.com/01org/tinycrypt/tree/v0.2.0
The code was refactored to eliminate function calls and checkpatch
errors. Furthermore, the PRNG was replaced by sys_rand32_init.
Refactoring history is available at:
Repo: https://gitlab.com/santes/tinycrypt/tree/refactoring
Commit: f71fc46403e90be0c54a77150e0539756d8314e7
Jira: ZEP-614
Jira: ZEP-862
Change-Id: Ief3c317f3d370a073f07307e53018991b03d9229
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This test is prompted by incorrect multilib selection for Cortex-M4
(armv7e-m subarchitecture) in Zephyr SDK 0.8.1 toolchain. The idea
is do an operation which guaranteedly results in a call to a support
routine in libgcc, which is part of multilib set. Long long division
is used as such, with a fault produced (see README) when built for
BOARD=frdm_k64f.
This test now passed with SDK 0.8.2 for frdm_k64f, but is added in
the hope of preventing/easing diagnosis of future regressions.
Change-Id: I07f01b0e70921703fc0d261fc6c48a2b13b29873
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
No need for architecture based configuration, they are the same
for ARM and X86.
Change-Id: Iea7a62221a09bcc035bb8c81e4f49cd4c9b02229
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This test checks if it can write at the edges of RAM within the kernel
image. The problem is that this memory is not meant to be trampled on.
With the help of custom linker scripts, place 32-byte buffers at those
edges.
Only linker scripts for QEMU on x86 and Cortex-M3 are provided, to avoid
having to maintain too many of them, in case the reference linker
scripts in the kernel change.
JIRA: ZEP-707
Change-Id: Icd5d680ce2cf064cce083c3d244a196e292bd453
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Rename test_ctr to test_ctr_mode to avoid confusions with any CTR-based
algorithm. For example, currently TinyCrypt v0.2.0 supports the
CTR PRNG algorithm.
Rename test_prng to test_hmac_prng to avoid confusions with the test
case for the CTR PRNG algorithm or any test-case related to PRNGs.
Rename test_cbc to test_cbc_mode. TinyCrypt test case for CBC mode is
"test_cbc_mode.c", so it makes sense to keep the same name for the
directory.
Furthermore, README files are also updated to reflect the previous
described changes.
Change-Id: If0af4dcffe8917a7c29608231d3954b73dff5e10
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This commit solves some indentation issues detected in the following
test-cases/files:
- test_cbc/src/test_cbc_mode.c
- test_ctr/src/test_ctr_mode.c
- test_prng/src/test_hmac_prng.c
Change-Id: I0f184ae4b510e4552a061523ea3e1216ae1f6f2a
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Added filter options to avoid building for the Arduino_101
and Quark_se ARC core as there is not enough RAM to run this
test.
Change-Id: I0c1172714c9827e632648fcedc67555251f25769
Signed-off-by: Itankar, Piyush T <piyush.t.itankar@intel.com>
This commit adds the test case for the CTR PRNG algorithm.
Origin: https://github.com/01org/tinycrypt/tree/v0.2.0
The code was refactored to eliminate malloc and free function
calls and checkpatch errors. However, many warnings are still
present. Refactoring history is available at:
Repo: https://gitlab.com/santes/tinycrypt/commits/refactoring
Commit: 5d0482c26c4ad69e7854dde58d15bb57a3e5f18f
Jira: ZEP-614
Jira: ZEP-860
Change-Id: I0620868d092941931762718c81fe13fc01f251b2
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Adds support for handling L2CAP send data command.
Change-Id: I120a9ed56506ce205e32c5efe15c5d967d7726b6
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds support for handling L2CAP listen command.
Change-Id: I2c9c27f925c923a14ddb28b41fbefd612b32d63a
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds support for handling L2CAP disconnect command.
Change-Id: If6f8f3a7485dc8ae270481ed6af4f0a4d4c69fac
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds support for handling L2CAP connect command.
Change-Id: I95d27831f65ed6a3e02e1d6e7583baa6890b588c
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This allows running the sanitycheck with:
--tag unified_capable -x KERNEL_TYPE=unified
to run the unified kernel with the tests it is currently known to be
able to run.
Change-Id: Ic145fc6adca162745887672372226fd67447b34a
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
- Use a more limited range of priorities, since the current
implementation of the unified kernel only works with 32 priorities
total. Instead of starting at 10 and going up by 5 up to 50, start
at 5 and go up by 1 up to 12.
- The definition of kmutex_t has changed from a uint32_t to a struct
k_mutex *, causing this to not work anymore:
const kmutex_t private_mutex;
since this makes the object constant instead of the reference to it.
Private object must be referenced like this instead:
kmutex_t const private_mutex;
since const is left-associative.
Change-Id: I9d70bfa3944ea46033a6b49251a4993e9bd2b588
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The test does not run out-of-the-box currently, mark it with a #error.
Change-Id: Ia720c674290e59e95db1c2948c508c0464caa672
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
isr wrapper names conflicted with real kernel APIs.
Change-Id: Ia85245fcd3025f9d15175523982883e16e97010c
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Fixes test_sema/microkernel so that the variable assigned the return
value from task_sem_group_take() is of type 'ksem_t' instead of 'int'.
Work by: Peter Mitsis <peter.mitsis@windriver.com>
Change-Id: Iee9f321a6bd51ca3bc0cd8b0c7eceae8a5bf7ce0
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Test is poking into microkernel private data structuresa, but the
unified kernel provides an API to retrieve that value.
Abstract the call in the microkernel case to minic the unified kernel
API.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Change-Id: Ic3195d470fda178164268d9c71c55a2a6daa61a3
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Fixing issues with the test itself really:
- reply_timeout semaphore was not initialized, causing its limit value
to be 0 on unified kernel
- There is no API to set a fiber's priority after it is started in a
nanokernel. However, tcs.prio can be written to and this works without
issues. On unified kernel, this does not work however because the
thread has to move between linked lists representing each priority in
the ready queue.
Change-Id: I3c5585da05cbc4ac3d2f0f9ae0297d24d41b1309
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
LOAPIC timer driver is used by both LOAPIC and MVIC, but the
correct #define needs to be used for the IRQ line.
Issue: ZEP-848
Change-Id: Ib682dd95c08ba437d1ff409e0e0352944d13b633
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Fix several compiler warnings that were preventing sanity from
completing successfully when running with the CONFIG_DEBUG=y setting.
(related to compiler flag -Werror=maybe-uninitialized)
JIRA: ZEP-735
Change-Id: I3cb79eb0f254f15d18f18ace50b0cf24e9ef5f10
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
CONFIG_PINMUX_DEV_QUARK_MCU is deprecated and QUARK MCU support
is replaced by CONFIG_PINMUX_DEV_QMSI. So delete this deprecated
CONFIG option.
Change-Id: I2cad6cfd4344386a00d45a579e8cc586935b041f
Signed-off-by: Qiu Peiyang <peiyangx.qiu@intel.com>
We no longer produce nanokernel.elf or microkernel.elf.
Change-Id: I37cb985ddc90f4129f122b9209d306898a71a596
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This adds method which initialize data pool for L2CAP data.
Change-Id: I2b170489aa4b2afc3c1f962591f377e23d147161
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This adds commands to the Bluetooth Testing Protocol for L2CAP.
Change-Id: Ie9ea180c4db62c238ce1450e5714ffd7b0ca2f5f
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Remove BT_RFCOMM_SEND_RESERVE usage since it will be removed
eventually.
Change-Id: Iada20cf0692ae12996e7ed820601bb77fe47d438
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Sets new command in BT shell app to send data to peer
Syntax:
>br-rfcomm-send <number of packets>
Change-Id: Ic795d007a03f657afb833719ae0e800ca0ac6e0b
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
This adds queueing support for requests that requires a response making
it simpler to use the API. The storage is keep in the parameters of the
request so it is up to the application to define how many can be queued
but in case the application don't want a request to block waiting for
a buffer it can use BLUETOOTH_ATT_REQ_COUNT to control the available
buffers which is recommended in case the requests will be sent from the
RX fiber.
Change-Id: I407c3982a7ecdc4a9eff7172d9d0addd46949783
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
prj.conf is for single mode LE controllers.
Change-Id: I138a560f4e33f6663135bbcbb4d8aeb5955342a1
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
BR/EDR support in chip is mandatory if BR/EDR is enabled so add
separate config for it. This is to avoid problems when using
single mode LE controller.
Change-Id: I9d9692b89883dd1980803d66818fb6e3a368afb0
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Sets new command in BT shell app to allow register one RFCOMM server.
Syntax:
>br-rfcomm-register <Channel>
It also accept the connection from remote and provides dlc object
Change-Id: I99f672ee68785338f3bf22948d4f33b3e1aecd2e
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
This sets BR/EDR name with same value used over LE.
Change-Id: I29407b0b44907b520b0f39afe868fc612c5e47d4
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This API has been deprecated and scheduled for removal.
It was only implemented on X86, and ARM systems that
aren't XIP.
Static exceptions (only implemented on x86) will
continue to be tested by test_static_idt.
Change-Id: I6d63347ead8200002ee1edd8dd4572b418800400
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Spaces were used instead of tabs. Fix up by using Lindent from
Linux kernel since we use same coding style.
Change-Id: Iece925ae40cad342fde1e33c240cb2ac23a15a9b
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Spaces were used instead of tabs. Fix up by using Lindent from
Linux kernel since we use same coding style.
Change-Id: I7aa5c3f25a800fdaec6852e0d36daa07f1424f9a
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Spaces were used instead of tabs. Fix up by using Lindent from
Linux kernel since we use same coding style.
Change-Id: I7294d1cef98031ba4ca1c202e0f19dbb7e504e16
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Spaces were used instead of tabs. Fix up by using Lindent from
Linux kernel since we use same coding style.
Change-Id: I7ecb6dfd602ea4768d6a53e509f29b208d96c479
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Print some stuff, and verify that the output is as expected.
Not comprehensive (yet).
Change-Id: Ib1ce8dff8165d8ee6b02ff6272513fd76a7be842
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Casual building in the tree leads to regular messups where I forget to
clean up the outdir first when switching platforms and the build fails
in strange ways.
Put a $(BOARD) subdirectory under outdir, and use that at $(O) when
the user does not provide an output directory.
Note that "make pristine" continues to remove the entire outdir,
including other architecutres (so as to make the tree pristine).
Also update a few spots where outdir was mentioned in documentation to
clarify the new scheme.
Change-Id: I365eec06ea440f17380b9f9ace5f5d34b9bed4dc
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Microkernels now support 'main' as a task entry point.
Change-Id: I39b07c191a98748191536ade6f87ec02da064bf1
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This test can't run properly because it already defines
an IPM console sender, and instantiating the dummy one
prevents any messages from being forwarded to the x86 side.
Issue: ZEP-708
Change-Id: Ib13c5df5db67f3d9fde960f8e5cda354c60efae1
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The QEMU bug in the SDK has been fixed.
This reverts commit eb63710960.
Change-Id: Ic405c9df0f7aebb2a9d20180c7b0c04889669610
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We are also seeing qemu failures in the synchronous wakeup tests,
where the fiber should be resuming instantly but in practice sees a
one-tick delay due to the emulation environment not being
deterministic. Allow one tick of slop in those too.
Change-Id: Idab7c45ea0b10bd955b90a98d3884b5fe0571187
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
On some hardware (Qemu) the timer guarantees aren't honored as well as
we like, and these tests are observed to spuriously fail in practice
(e.g. CI testing). Allow for one tick of slop when testing sleep
durations.
Change-Id: I4b694c0a9ddfc1ee48510fa5deda2bb31499debf
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Bluetooth tester is now using new system log macros.
JIRA: ZEP-311
Change-Id: I6398f2de12d5ba1073e40fd45aa8e0177d1e279d
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
Previously, exception stubs had to be declared in assembly
language files. Now we have two new APIs to regsiter exception
handlers at C toplevel:
_EXCEPTION_CONNECT_CODE(handler, vector)
_EXCEPTION_CONNECT_NOCODE(handler, vector)
For x86 exceptions that do and do not push error codes onto
the stack respectively.
In addition, it's now no longer necessary to #define around
exception registration. We now use .gnu.linkonce magic such that
the first _EXCEPTION_CONNECT_*() that the linker finds is used
for the specified vector. Applications are free to install their
own exception handlers which will take precedence over default
handlers such as installed by arch/x86/core/fatal.c
Some Makefiles have been adjusted so that the default exception
handlers in arch/x86/core/fatal.c are linked last. The code has
been tested that the right order of precedence is taken for
exceptions overridden in the floating point, gdb debug, or
application code. The asm SYS_NANO_CPU_EXC_CONNECT API has been
removed; it was ill- conceived as it only worked for exceptions
that didn't push error codes. All the asm NANO_CPU_EXC_CONNECT_*
APIs are gone as well in favor of the new _EXCEPTION_CONNNECT_*()
APIs.
CONFIG_EXCEPTION_DEBUG no longer needs to be disabled for test
cases that define their own exception handlers.
Issue: ZEP-203
Change-Id: I782e0143fba832d18cdf4daaa7e47820595fe041
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We filtered on CONFIG_SOC_FSL_FRDM_K64F which doesn't exist change it to
CONFIG_SOC_MK64F12 to allow this testcase to run on the K64 platform
Change-Id: Ifdd89e66aa403c3bb28c07d3a546037275a5118d
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This contain the run of the self test for the ciphers, crypto
algorithms and utilities of mbedTLS.
Jira: ZEP-327
Jira: ZEP-340
Jira: ZEP-495
Origin: https://tls.mbed.org/download/start/mbedtls-2.3.0-apache.tgz
Change-Id: Ic1bb30b7ed691f17421510cd914ec5096e4e70ea
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Signed-off-by: Kuo-Lang Tseng <kuo-lang.tseng@intel.com>
We have already done this on x86 and ARM. The policy is as follows:
* IRQ priority levels starting at 0 all have the same semantics and
do not have special properties. The priority level is either ignored
on arches which do not support programmable priority levels, or lower
priority levels take precedence over higher ones.
* Special-case priorty levels are specified via flags, in which case
the supplied priority level is ignored.
Issue: ZEP-60
Change-Id: Ic603f49299ee1426fb9350ca29d0b8ef96a1d53a
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This introduces the default language to use for building, deploying
and evaluating testcases on real hardware in the automation framework.
To be able to filter testcases out based on .config values, we split
the build process into generating the configuration file, filtering
and then the actual building.
The configuration step is done first, to be able to skip as soon
as possible.
This file is in the top level as the test runner will look for
defaults in parent directories.
Note that the default's entry in tests/.tcdefaults takes advantage of
the fact that all:
- the test cases under tests/ print standarized strings for success
or failure.
- the tc_util.h kernel header will print the passed runid if specified
when finalizing the testcase. We will make sure it is found to deem
the TC succesful, ensuring that the right image is flashed and
verified.
Change-Id: If40b226aef9583f7ce4064405d9334de379f2b00
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
This adds device address to the controller_info data. This address
may be used then by PTS for establishing connection etc.
Change-Id: Ic2319c452d94ac79376659ba37b4c9d812ccf9ae
Signed-off-by: Mariusz Skamra <mariusz.skamra@gmail.com>
If CONFIG_BLUETOOTH_PRIVACY is set in Kconfig, current settings
shall indicate it's usage.
Change-Id: I0645aedf1b774617c9d97cec0070908aef919ca7
Signed-off-by: Mariusz Skamra <mariusz.skamra@gmail.com>
Based on BTP specification following GAP_SETTINGS_* flags were added:
GAP_SETTINGS_CONTROLLER_CONFIG,
GAP_SETTINGS_STATIC_ADDRESS
Change-Id: Ic87d13772c0ef9c9bc8bba331c8bc9f3ffc93f87
Signed-off-by: Mariusz Skamra <mariusz.skamra@gmail.com>
When tester application has been initialized, send this event
to indicate that Upper Tester can send first BTP command.
Change-Id: Id3f4dd246c4e67982057f9518b4b0036e79a6a01
Signed-off-by: Mariusz Skamra <mariusz.skamra@gmail.com>
Before sending any command, the tester shall wait for this event
indicating that IUT is ready to accept first BTP command.
This is needed, because some devices need more time to initialize
their stacks, so that the first BTP command can be lost.
Change-Id: I92d1c6ea8be905734037eb29f7f270a70ab1583e
Signed-off-by: Mariusz Skamra <mariusz.skamra@gmail.com>
Depending on advertising options this can be non-connectable address.
NFC pairing application document also allows broadcaster/observer
roles.
Change-Id: I9b104ac8fb9752a083a7a31fc20598c66f23f608
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Follow up to TSC decission for further discussion in the networking
WIG.
Change-Id: I148b484dfe308661573e47ed3e60cceed673bddf
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Daily build failing due to this test case timing out
execution after 3 hours. Locally this test takes about
a minute, the issues with CI are being looked into.
Change-Id: I27e40846dde25fc65281b4aea61d10b403c6512d
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This allows to query LE and BR/EDR OOB data.
Change-Id: I8bc281a9549092c1c4b40c346580abb5fd51d02d
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This lets the callback take advantage of the powerful net_buf API for
parsing the advertising data content.
Change-Id: Id65e6e83efd60c0f36c47bc5446a2e8ec2833d7c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This makes bt_gatt_write consistent with the rest of the API where the
parameters are passed back to its callback.
Change-Id: Ie94208aa661d3620d0cbc5be4a4fb5b3c3ef061c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This can be used to test if receiving and sending simultaneously is
working properly with tools such as BlueZ's l2test.
Change-Id: Ic6bcd00a4e1448bebd3ae74bcc58986872332bbe
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The 16550 will now be the default console device.
Change-Id: I92a6b49984b055e7d5f5c97e5192150be0d5c5c7
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Having two parallel implementations is a maintenance issue, especially
when some strategically placed #ifdefs will suffice.
We prefer the ASM versions for SYS V, as we need complete control of
the emitted assembly for interrupt handling and context switching.
The SYS V code is far more mature. IAMCU C code has known issues with
-fomit-frame-pointer.
The only difference between the two calling conventions is that the
first three function arguments are provided in eax, edx, ecx instead
of on the stack.
Issue: ZEP-49
Change-Id: I9245e4b0ffbeb6d890a4f08bc8a3a49faa6d8e7b
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This adds reading of included service attribute 128bit UUID.
The limitation of this solution is that if several attr handle-range
pairs will be received, this will read first attribute UUID and then
start discovery from the the succeeding handle.
ZEP-373
Discovery related test results:
2/76 GATT TC_GAD_CL_BV_02_C PASS
3/76 GATT TC_GAD_CL_BV_03_C PASS
4/76 GATT TC_GAD_CL_BV_04_C PASS
5/76 GATT TC_GAD_CL_BV_05_C PASS
6/76 GATT TC_GAD_CL_BV_06_C PASS
Change-Id: I27185b3a3ae96c9c03b0f356492df18ba83b183a
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Now uses net_nbuf_ll() to point to link layer header.
Also the ARP req test passes properly.
Change-Id: If649ff19a064490bff33d03b4ce70ef11bfa7cd5
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of using hard coded net_if, get the default network
interface using net_if_get_default() function.
Change-Id: I6248555ce57ae5196adea7baa9db325660a71255
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
These two boards don't have enough RAM to effectively run this
test case without making the stacks so small they don't work
on other platforms. ARM is sill covered by other boards.
Change-Id: Ibf20eefaf29f989cbb6da6cd3a8eeed2faa1950b
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Right now there are tests for IP packet checksum calculation.
Change-Id: I1e9e72d01d4690728269c4484f8628350cf95729
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
These tests will check that caller is able to set IPv4 address
to a network interface and check if an address is one of the
assigned to a network interface.
Change-Id: I8aa748c40fbc02eef50ccf76d10a0057ef29021b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Tests have issues right now so these will be activated later.
Change-Id: Ib5549f9ed5600a20b2cfddbddcde8e7f7b297eef
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
User should use the net_nbuf API that is supporting a concept
of RX, TX and DATA buffers, instead of using directly the net_buf
low level API.
Change-Id: I3b8f5f13cd37d42d2322a58b35573e117d520c54
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
More realistic IPv6 packet creation tests created.
One test creates one big IPv6 packet and manipulates that.
Second test creates a list of IPv6 header + data fragments
and sets some user data in those fragment buffers.
Change-Id: Ic8309ff115e1d735e98c30b3c8292b0d6ffc5f42
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add tests for checking that the net_buf fragmentation works ok.
Change-Id: I778f79bae971314b6f19c1bf00ed42e1c2128e99
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allan fixed the underlying issue, re-enable.
This reverts commit 19fa82ab91.
Change-Id: I6e517f76a6650a3e9ba5a09118187e6c965a147a
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The test test_thread_monitor fails when a platform enables
the IPC console.
This commit fixes the test to count the IPC console fiber
if it is enabled in the project or the platform.
Change-Id: I9faf9d120b35d9211e558be8f5788885f30c3081
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
We now allow use of -mgpopt=global and -mgpopt=data. The 'global'
option is now the default instead of compiler-default local, expanding
global pointer usage to all small data in the system.
For systems where all RAM is less than 64K, the 'data' option may be
appropriate.
Some fixes had to be made to the system in order to get around some
issues:
* prep_c.c no longer uses fake linker variables to figure out the size
of data or BSS, as these gave the linker fits as it tried to compute
relative addresses to them.
* _k_task_ptr_idle is create by sysgen and placed in a special section.
Any small data in a special section needs to be declared extern
with __attribute__((section)) else the compiler will assume it's in
.sdata.
* same situation with extern references to k_pipe_t (fixed pipe_priv
test)
For legacy applications being ported to Nios II which do things that
freak out global pointer calculation, it can be disabled entirely.
Change-Id: I5eb86ee8aefb8e2fac49c5cdd104ee19cea23f6f
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Update the FP sharing test project for use with the Cortex-M4.
Change-Id: If04a191b26291058bd7002ce8a0939eda8a5eb48
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Clean up test code in preparation for adding Cortex-M4 support.
Change-Id: I64a32e8aa2808b4e0348601e2fc0f7f39cdb413c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Buffers pool has to be increased for all configurations.
Change-Id: Id24caced5043c1672ca5f753d1e86d9a72c728ea
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
TP/GAW/SR/BV-10-C test case requires two long values to perform
nested prepare write operation. Using one ATT Execute Write command
this two values are going to be written simultaneously.
Change-Id: I2950409ed8f1d121dcc706b432cdf071b9af00c0
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Tagged some tests/kernel testcases with 'bat_commit'. Only test that
work on actual hardware are tagged, while tests with known issues
were left not tagged, test meant for emulator or build only were
also not tagged.
Change-Id: Icede6bc76788aba60d8f1fdcf624e95a7d3116a2
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
No compiler support for -fstack-protector on this arch with the
current toolchain.
Change-Id: Ifa793599b6760c318f16748f9e71c31e0d4edbe7
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Tickless idle will not be enabled on Nios II due to the
lack of a powersaving instruction.
Change-Id: Ib3c23d803d6335aeb791983e31ad7da2d0deb118
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This driver does not yet support interrupt-driven console.
Revert when ZEP-280 is implemented.
Change-Id: Ib430c39138194ab441c95a1b1856c3661102a625
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
$srctree for the application might not be set to be $ZEPHYR_BASE, use
$ZEPHYR_BASE instead to be more explicit in the build.
Change-Id: Iefa5ff59f246b584949329044f7a6531adc6ed62
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
printk() is too simplistic and does not handle byte precision on formats
like %02x etc... printf does, so letting the possibility to use it when
relevant. This might be useful when dumping out some network packets,
byte by byte where a precision of 1 byte (thus 2 0's) is necessary.
It's better to have this output:
41 d8 ...
instead of:
00000041 000000d8 ...
Change-Id: Idc15bbae67830f41388373e2ca1947bb274fb550
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
A recent change modified the fiber stack size of these tests
to 256 bytes, which causes a stack overflow on Nios II. (This
arch has lots of registers)
Increase to 384 bytes, which still compiles well on RAM-constrained
targets like Quark SE SS, Nucleo, etc.
Change-Id: I2152ea9fc1fac693638b8f7a00a6b6628e0c42d3
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is used in many other test cases. However when implementing this
function it's helpful to have a testcase dedicated for it, without
dependencies on other kernel objects.
Change-Id: I66a7cdd0b13712665384d5ad4e79050c82d32e3a
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Not all CPUs implemement the mul, div, or mulx instructions. Ensure
that any runtime handling of these works correctly.
Change-Id: I50426bd5704cd913f290c9677d1760d53c9e4b56
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This adds flags parameter to write callback which can be used to indicate
that data only need to be prepared with use of BT_GATT_WRITE_FLAG_PREPARE
fixing qualification tests that needs to check authorization or other
errors that cannot be verified with just the permissions.
Change-Id: I3d662b2027718ffb52a280e3bbc9750be14f89ae
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
BT_GATT_INCLUDE_SERVICE user_data shall point to the service declaration
of service to be included. So user_data_len shall be set to 0 to avoid
copying the contents of bt_gatt_attr to the server_buf, and just use
pointer to the actual attribute.
Change-Id: Id770daeb6d64644c51f2bc5d3962dd80363ec8c3
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Add HRS simulation to shell allowing to switch on / off HRS simulation
helping testing GATT notifications.
Change-Id: Idf99b74ac73d45d2f0d3279d50431be4027fef8a
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
attr pointer is local here, so it may be overwritten anytime, because
this attribute user_data will be used out of scobe of this function.
Change-Id: I85b390299980dac213d8ce1939078fe8b242c887
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Adds to BR/EDR L2CAP client channel object required handlers and allocate
room for channel data traffic to make it operational when fully
setup and to be interactive with internal stack.
Change-Id: Id1e90d7ea318ed8a875383995e4d175e124939eb
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Interrupt-driving UART not implemented yet for this driver.
Change-Id: Ida60d7e09e9eca2d7e6452a84f6d95529d0af9b6
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Fixes wrong server instance used during printing details on registration
PSM server.
Change-Id: I269d20bf4d12f24ce143a04c1c23ed8711b9cdba
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
There is no need for any prepare write variables as this is now handled
transparently by the stack and so any errors that happens during write
shall be reported in the return.
Change-Id: I3e629016cb7f5f6cd9106ff07c3cbb464e81734f
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The parameter is already inside a struct that's specific to BR/EDR
discovery, so there's no need to repeat "discovery" in its name.
Change-Id: Idb95788bfc9d62ecd52adecc35104e212724cb78
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Since we only have a single user we can enforce length > 0x01. We
should also ensure that the results count is 1-255.
Change-Id: Id5d91acae06c6c6fc66dd59c0e367682a98dc08c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This is a sample static testcase (so it needs no target machine) to
run checkpatch as a testcase and produce output only if it fails.
Change-Id: I055c0125ac785058e101faa68eb5aaff9f7caf16
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Add more specifications or qualify some to the sanity check test cases
for them to be ran in real hardware:
- kernel types (micro vs nano)
- platforms / arches to exclude / include
- one that is removed (for the PCI sample) as it cannot be ran
without extra information
Change-Id: Id14dc15eb89358c3656d2814ea41bb6fec051278
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
This is a sample static testcase (that needs no hardware target) that
will build the documentation and ensure it builds without issues.
Change-Id: I7174205522be9aead350e67b1672b8e976cb9191
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
For automation to detect this is the right test case being executed,
print the RUNID if defined
This TC doesn't use TC_*() macros, so we need to invoke it manually.
Change-Id: I6f7417621d649a59412bb92d8b665130757d926a
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
This is a helper to print a token passed form the compilation
environment.
Further documentation and rationale in the code.
Change-Id: I8d5e6b2246ba5c4f09b78532b3c600891f94bb63
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Refactors L2CAP core data structures and modifies functions that uses them.
Now we can have separate L2CAP feature channel objects for LE and BR/EDR
transport. This's also a ground for make L2CAP CoC API to be common
for both transports.
Change-Id: Ic1197b0e3c4f505764b23fb9c7eb27123a44a675
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Buffers pass to BT stack need to have minimum BT_BUF_USER_DATA_MIN
of reserved user space data.
Change-Id: Iaeb85faa20b1c5281bfd0331336295ad7cfdd68e
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
It is no longer necessary to implement flush callback for long
descriptors since the stack can queue prepare writes this callback
will never be called which makes BT_GATT_LONG_DESCRIPTOR obsolete
as well.
Change-Id: Idca31ba8e4404d2acba760c420394d5adee0a508
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This is similar to previous patch which makes the API much more simple
when handling long writes.
Change-Id: Ibd3856863a43927195e23936872a160d5ff94648
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a buffer for incoming prepare writes which can be
tunned using BLUETOOTH_ATT_PREPARE_COUNT, these buffers are then used in
execute write to commit the data thus making flush callback obsolete:
[bt] [DBG] bt_att_recv: (0x001159c0)Received ATT code 0x16 len 50
[bt] [DBG] att_prepare_write_req: (0x001159c0)handle 0x0022 offset 0
[bt] [DBG] prep_write_cb: (0x001159c0)handle 0x0022 offset 0
[bt] [DBG] bt_att_recv: (0x001159c0)Received ATT code 0x16 len 34
[bt] [DBG] att_prepare_write_req: (0x001159c0)handle 0x0022 offset 45
[bt] [DBG] prep_write_cb: (0x001159c0)handle 0x0022 offset 45
[bt] [DBG] bt_att_recv: (0x001159c0)Received ATT code 0x18 len 2
[bt] [DBG] att_exec_write_req: (0x001159c0)flags 0x01
[bt] [DBG] write_cb: (0x001159c0)handle 0x0022 offset 0
[bt] [DBG] write_cb: (0x001159c0)handle 0x0022 offset 45
Change-Id: Iae071d7b4b5b042285952da57e3f7a853cf58afb
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add testing for fragmented buffers to the net_buf test.
Change-Id: Id6c541b86c30ac94931a7086ebb6f1312fbc34f7
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When using a custom destroy callback it's the responsibility of the
callback of placing the buffer back in the free pool.
Change-Id: I5ff99c32bcb31ccc5eb0fad544d86b0c830e7051
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Use the more explicit net_buf_get_timeout() call where it makes sense
(e.g. where we always want to wait or never want to wait).
Change-Id: Id1eabe0ad2f9fa79f7be39e51fefa5161f9cc550
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Tinycrypt is maintained at github and thus should be treated as an
external library and hosted under ext/.
Change-Id: I4c4a3bcdacf01d4922919e5ea1f9dec21a19cd37
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This add CONFIG_BLUETOOTH_DEBUG_LOG which depends on SYS_LOG since the
later can actually use either CONFIG_PRINTK or CONFIG_STDOUT_CONSOLE.
Change-Id: Ib2974d1331f6c91d119a218ec95e8bf01069377b
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This allows to set custom ID address from shell app.
Change-Id: I293800f116a7e56e183720a9b908ccb0e9622c12
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
If the CPU is ARC, define timestamp_serialize() to be an
empty macro so that this test builds properly.
Change-Id: I36f00dd429972b610c327cbe59bedb24b33553ed
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Used to say "ISR to back to". Now says "ISR back to".
Change-Id: I568306f6653096799ec22ea21cdb9ebee42ac359
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
The Quark D2000 uses the IRQ 10 for the APIC timer interrupt, this
cause a conflict with the "random" IRQ for the footprint benchmark
Change-Id: Iead18821af307832d54b0c9f3db5e52413ba670b
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Disabled bluetooth test for STM32F103RB SOC because there is not
enough RAM space for the test.
Change-Id: I9f097d9201ed659c4970b67f42c570331b92bad8
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
Microkernel on ARC works fine, was missing some declarations in the
linker file.
Also enable testing of microkernel with ARC and disable tests where
ARC is not supported yet.
Jira: ZEP-396
Change-Id: I2ac7b8dc0bea22f5d2e24832d9e3afad8df9f580
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Convert leading whitespace into tabs in Kconfig files. Also replaced
double spaces between config and <prompt>.
Change-Id: I341c718ecf4143529b477c239bbde88e18f37062
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Return correct errors for long write.
Change-Id: Idfd54d961db9b2023d05a0dcfa7082d63e9c0261
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This fixes invalid cast from struct bt_gatt_attr to bt_gatt_chrc.
Change-Id: Idc2c016e26b5d38d2d4772a7bd79af8357a4da58
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This allows to use LE SC with nimble firmware running on Arduino 101
board.
Change-Id: I3a9a485dc87c367160da98010d0189dfef09d5de
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Adding test service makes possible to test Bluetooth PTS test cases
with the shell. Currently long and auth characteristic.
Change-Id: I153efd3f7fa266f93873ef978025faf72c664076
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Many test configs are the same, remove complexity and duplication by
using just one kernel config where applicable.
This removes the usage of ARCH which is a remnant from the days where
we had to specify the architecture of the board, the architecture is now
part of Kconfig and determined basded on the board configuration.
This will also make it easy adding new architectures to test cases without
having to add an architecture specific config file when it is actually not
needed, for example now that we will enable micro-kernel support on ARC.
Jira: ZEP-238
Change-Id: I143fa3c4629c58329cfeb0c761c7a896fc1ef63a
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Returned by flush_value function value should be length of data which
are previously prepared by prepare write requests.
Change-Id: Iacfc63527c68cf20a76a4587acc749bd2d00cffd
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This enable checking for errors and automatically print help string:
btshell> connect
connect <address: XX:XX:XX:XX:XX:XX> <address type: (public)>
Change-Id: Ie097ecddb72ab15bf6192e310d0bd839bfd251d5
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This patch fixes returning invalid offset, invalid attribute length
error. Error should be set during prepare write and returned in
response to execute write request as error response.
Change-Id: I78c57abc5f6f2fbd4a2c0fbb1ee6532212679a36
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
Adds testcase.ini files for the floating point sharing tests to
ensure that there are run on a daily basis.
Change-Id: I206b1734700f6e998c19d7ad1b36a84400284899
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
This adds help strings to commands describing what parameters they take:
btshell> help init
init [none]
btshell> help connect
connect <address: XX:XX:XX:XX:XX:XX> <address type: (public)>
Change-Id: I0b79cb4f2d424f74b0ddb1de7a6d7120e81e2ae3
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
By calling the microkernel entry point 'main' there's no need to have
extra hacks to share the same c-file with both nano and micro
configurations.
Change-Id: I6623855a87ef8624b2bddb75b95079521e0eab8b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Support long write maximum 100 bytes.
Change-Id: I071fdf68e29a3d4493c1c60215853cfd8f2ae3c3
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Using ARCH variable to select different configurations for the different
architectures is misleading and conflicts with the variable ARCH being used by
the build system. The variable is not needed, it is application specific and
an application can be built without the need to specify ARCH on the command
line.
This is yet another item specific to samples and test cases that
wrongfully being used and documented for every application. We need to use
another variable and just make it clear it is specific to samples and how they
are written. One possible solution is to have a script that gets the
architecture based on the board being used. Attachments
Jira: ZEP-238
Change-Id: Ieccbc087a41858fb96fb361c0aaa04705e968a4e
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
BTP API allows to set only advertising and scan response data without
declaring advertising type. Advertising type is deduced from current
flags status. Scan response data is static in tester - to set non
connectable mode in current BTP API scan response length must be
considered.
Change-Id: I742cd8ec774c24f317d639835844a4743bb25445
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This makes bt_gatt_write similar to bt_gatt_read where the parameters are
stored in a struct which can be used to store intermediate values while
the operation is in progress.
Change-Id: I3c62af137b99985690cf88dcc37a977a0be891f5
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This test has been broken since we've moved from object IDs being
small integers to pointers. The problem was two-fold:
- The semaphores are not put in a an array anymore, and are thus not
necessarily referenced. The linker drops them in that case.
- The semaphores are not necessarily allocated in memory in the order
they are defined in the mdef file. On x86 actually, they are
allocated in the reverse order.
There was no need anyway of having all those semaphores: the microkernel
semaphore is a counting semaphore. It can thus simply be given a number
of times anre taken the same number of times to operate on it a
reasonable amount of time to take a measurement.
Change-Id: I67c82cb7eb03d28906f8c63717db8f951818be5e
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
A recent issue due to a change to ARC was not caught because we
do not build on ARC. Now that we have libc with ARC toolchain,
built for all arches.
Change-Id: I8c9b7d37802cb582dcb50e6c61d040078d8ecd26
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The filter specification now matches the code. We can run on any x86,
or those ARM boards where the test's timestamp.c has _Timestamp*
implementations.
Change-Id: Ib81e5379f892beb3783dd3c345cd536c883a74de
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The old 'config_whitelist' directive in testcase.ini has been removed.
We use the new expr_parser module to parse a 'filter' directive which
is a boolean expression. This gives a great deal more flexibility
in how tests can be filtered.
To keep the tree bisectable, use of config_whitelist in testcase.ini
converted to the new expression language.
Change-Id: I0617319818c5559c0f0569d2fa73d09b681cac51
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Adds a test for pending microkernel tasks on nanokernel objects.
This explicitly covers the nanokernel FIFOs, LIFOs and timers
while implicitly covering nanokernel sempahores.
Change-Id: Ic044b731da13dea337e199499c23ea425056fae4
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Instead of requiring application to provide both advertising type
and address type used just require app to provide info if advertising
is connectable or not. Advertising type is set based on provided
SCAN_RSP and local privacy support.
When local privacy is enabled it is no longer possible to advertise
using identity address. If such feature is to be required later on
advertising options can be extended.
This gives BT stack full control over what type of address is used
for advertising and is a preparation for random address rotation
and OOB support.
Change-Id: I90e9a683ef3794f155707343c874f75585439325
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Callback errors should contain ATT error code not posix errors.
Change-Id: I698fac086ab8b2dca3487ab99ee974b4318d16f7
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Some IUTs may have predefined attributes in db which aren't take into
consideration while building via tester database. BTP clients should
know about such attribute handle offset change. After start server
we're sure that none of attributes will be added since zephyr db is
constant.
Change-Id: Ia2c6edaa7a2f3ca4a9c88fe00122c808a529dadb
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
* service include macro definition takes reference to
first service attribute of the included service
Change-Id: Ib2b1defe2c99aea738da791af74a534d56025eae
Signed-off-by: Roger Lendenmann <roger.lendenmann@intel.com>
This is more of a convenience to let the driver identify itself in
debug logs and the monitor protocol.
Change-Id: I73351477e98d45d6344c180b8088bde29df6f7d9
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The bus that we notify over the monitor protocol is really driver
specific, so let each driver specify their bus type.
Change-Id: Ic3a086fcc06352dbf051e52cef5bf6b8696349ae
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add two new test cases to exercise the code in monitor.c.
Change-Id: I66ae70e0d3b61d3b852916333019e1ed2c5c6cf4
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This patch reorganize tester gatt commands to handle also sequence
builded gatt data base
Change-Id: I5fc89c1c498dd2ecf3999bc93e3caffd14f67cb7
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This prepares for adding other debug types besides the printf-style
logging to the console.
Change-Id: Ic2ed305192491734da991c4f61fdaace03fd60f2
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add config files to be used on Arduino 101 (or any Curie-based) board
with the MyNewt nimble stack running on the nRF51 and exposing HCI
over UART. These configs contain a stripped-down set of features so
that the resulting image fits e.g. on the Arduino 101.
Change-Id: I7300e9ca4205de6f52aa6ca1bfe4e0b011b6dcbe
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This adds the guidelines for the tester application building usage.
Change-Id: Ibcd31b7bed827f8eee99fdf21d3bb1e8edd24d2e
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Add Kinetis SoC family and rename fsl_frdm_k64f to mk64f12.
This will allow adding new SoCs of the same family and the reuse of code
among SoCs of the family and series.
Change-Id: Iea1a663aef7ce0487f147bdd36f668bebe80deb5
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use CONFIG_SOC_FAMILY for the top level SoC family. A family
will have different SoCs or different SoC series with multiple
SoCs.
Adding the Family string to the config variable to avoid confusion
between actual SoCs and families and to prevent name collisions.
Change-Id: Ic99a2c1df7850dee3a45641027af82464dd6fadb
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
For memory-constrained platforms (like the Arduino 101) it's desirable
to be able to build a slimmed-down shell app that doesn't contain any
unnecessary features. This patch makes more of them optional.
Change-Id: Ia7f2cc0930dda6dfed5ce020b56913c6e0bc3d6f
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
With this patch net_buf based heap will be used to store attribute
user_data and UUID. This is the first step to remove gatt_buf.
Change-Id: I578f26b781e01f5f3464c05f7210dc27cdea8edf
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
We have not found any use-cases for dynamic IRQs where a static
IRQ did not also suffice. Deprecate so that we can eventually
remove from Zephyr and nontrivially decrease the complexity of
the kernel.
Change-Id: I509655371773aeaca7d01134dd850eb4cd95f387
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This mechanism does not add enough value to the kernel to be worth
maintaining it. Drivers that need deferred processing of interrupts
can simply define their own task and have the interrupt handler
release an event that the task waits on.
The API is marked as deprecated and it is removed from unit test
coverage as well as the documentation.
Change-Id: Ib87b91cb41e9b6d7fdf0dc62b240a531b6a8889f
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Most iuts data base are intended to have its attribute database builded
in sequence and its constant (except attribute values, parameters,
permissions). Patch allows btp specification to cover also devices
which cannot assign an ID right after issuing add attribute command or
set attribute component (which points to defined attribute ID).
Change-Id: Ie8e5ed223609cca2b6e3fb8444065f33b1408142
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This allows to accept or decline incoming pairing that would
otherwise result in JustWorks pairing.
Change-Id: I759ea067ef298b437e0112b8b7ef3bedf106dc52
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
There is no need to have separate configs as init sample is now
used for different build configuration tests.
Change-Id: I917692f8a8e96345afc561dd04bdcf08cdfa5de7
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
So far the assumption has been that the host stack manages all
incoming and outgoing buffers. For the incoming buffers (from the
controller) this has required hci_core.c to manage its own pools and
do the host flow control. This setup makes perfect sense for an
architecture where the controller resides remotely on a different CPU
& address space (i.e. the "traditional" HCI transport case).
When the stack runs on a system where the controller resides in the
same address space this setup doesn't work that well. In such a
scenario the incoming buffers are ideally created as low down in the
stack as possible (i.e. below HCI), which means that the current
hci_core.c cannot be responsible for managing their pools.
To allow for both types of architectures this patch introduces a new
BLUETOOTH_HOST_BUFFERS Kconfig option that can be selected to say that
host-side management is desired, or deselected to say that the
controller (residing in the same address space) takes care of managing
the incoming buffers.
So far the incoming buffer types were identified by hci_core.c by
looking at their "free pool" pointers, however as soon as the pools
are allowed to be somewhere else this doesn't work. To solve this we
now require a minimum user data size for all Bluetooth buffers and use
that to store the buffer type.
Change-Id: I14bc32007e3e3f17c654f71f79b520650028d7ce
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Not only SECONDARY, but also the following ones:
- NANOKERNEL
- MICROKERNEL
- APPLICATION
Change-Id: Id41fa572c830727166101fa3c6254398857b31c7
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is needed especially for nble. If bluetooth is not enabled we
cannot send another commands to tester.
Change-Id: I17e639301bba6efd127f2c743b8942c1b493f9da
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
In many cases when we want to access the 'val' member of bt_addr_le_t
it's in situations where the type needed is actually bt_addr_t. To
avoid unnecessary typecasts in these places simply embed bt_addr_t
inside bt_addr_le_t.
Change-Id: I7eecf129bee1dcf085abc83ec2f32e1a10b0b5aa
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add initial support for the Privacy Feature, including the ability to
manage a local IRK and to use Resolvable Random Addresses.
Change-Id: I1c70aea67078dd2a5d07f3b797c37746ebe9ab61
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Enable building pinmux drivers to catch build breakage.
Origin: Original
Change-Id: I86ec02423bf23ee6aca41b9413e240e984313fcf
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
For STM32F103RB targets, the SRAM is overflown by 2-3kB in microkernel
test. Platforms with this SoC can still be built for in the nanokernel test.
Change-Id: I012b93cf8dfec74292f7ab228f4b2fca1a4f3444
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
Exclude STM32F103RB platform from the test. The SRAM is overflown by
>20kB, while the CPU itself has 20kB of SRAM.
Change-Id: Ic9aad6b88d517b62f4a18901cd698ba9a9defb40
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
Disable the test for STM32 based platforms until an implementation of
timestamp counter becomes available.
Change-Id: I2e50dac36dbfdc61081610c0e0cf1ace8892f602
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
Take advantage of shell_init() accepting const commands array. This
moves ~280 bytes from SRAM to the text section.
Change-Id: Id64ee766e3c6cf7ce4cc623a1e21d3dacf33f050
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
Splits the test into two clear sub-categories: microkernel and nanokernel.
This is done to maintain consistency with other tests that do the same
(e.g. test_obj_tracing, test_sema, test_stackprot, test_timer).
Change-Id: Iddb1ec8d569a9d953fb8af5ce08e87b51995f821
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
It will extensively test all provided functions within a normal usage of
the API.
Change-Id: I723203a29c3f3416b464030a7fe34eac5fff6095
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Fixes line length and whitespace issues flagged by the checkpatch tool.
Change-Id: Id49cd5341571ac7893929a2836fe5e06166abe06
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Reduces the amount of memory allocated for fiber's stack.
This permits the test_context to compile on boards like
nucleo-f103rb. Sanitycheck script passes all test for
test-context.
This patch was verified on the emulated platforms and not
against real hardware boards.
Change-Id: I219f63063ee2dca5b0326e25141d8b37f4cd1d74
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
Reduces the amount of memory allocated for task's stack.
This permits the test_pool to compile on boards like
nucleo-f103rb. Sanitycheck script passes all test for test-nano.
This patch was verified on the emulated platforms and not
against real hardware boards.
Change-Id: Ib8041f6d91e8ffc5fcb16dc73de1f7662d9596da
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
Reduces the amount of memory allocated for stack (both fiber
and task). This permits test_sema and test_mutex to compile
on boards like nucleo-f103rb. Sanitycheck script passes all
tests for test_sema and test_mutex.
This patch was verified on the emulated platforms and not
against real hardware boards.
Change-Id: Ie25288bbbbfa64bfc5f7463639bfb09639cc184f
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
Reduces the amount of memory allocated for fiber's stack.
This permits the test_nano to compile on boards like
nucleo-f103rb and arduino 101 sss. Sanitycheck script passes
all test for test-fifo.
This patch was verified on the emulated platforms and not against
real hardware boards.
Change-Id: Icf30c4056d9f9ebdc82c100305bf761e49b64491
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
Reduces the amount of memory allocated for fiber's stack.
This permits the test to compile on boards like
nucleo-f103rb and arduino 101 sss.
Sanitycheck script passes all test for test-lifo.
This patch was verified on the emulated platforms and not
against real hardware boards.
Change-Id: I1dd514c9d273bcf490e0eb4f1fadee1a8a94bcc5
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
The extended inquiry response data format include at least two octets:
length and type, so adding NULL termination name shall be 240-2+1
octets.
Fixes accessing wrong memory in the statement below:
...
memcpy(name, &eir[2], sizeof(name) - 1);
...
Change-Id: I71be96aed6af63d0649f4d64271208eeb11e2c6c
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
These tests were using non-portable NANO_CPU_INT_REGISTER. They
now use IRQ_CONNECT, which lets us run these tests on all arches
and not just x86.
Change-Id: Idd4264c2650c851aa78356f01586edbadd014501
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Changed names of Kconfig flags, variables, functions, files and
return codes consistent with names used in the RFC. Updated
relevant comments to match the changes.
Origin: Original
Change-Id: Ie7941032d7ad7af61fc02928f74538745e7966e8
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Test verifies that a task_sleep() function can be used during the system
initialization, then it tests that when the k_server() starts, task_sleep()
call makes another task run.
For fibers, test that fiber_sleep() called during the system
initialization puts a fiber to sleep for the provided amount of ticks,
then check that fiber_sleep() called from a fiber running on the
fully functioning microkernel puts that fiber to sleep for the proiveded
amount of ticks.
Change-Id: Iec20b61d7e802a19b1ec074d2511345eed9f2407
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
This function is not used outside of main.c.
Change-Id: Ia8cc6c2b2193906dd77d031b73d289c6acd128b2
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Reduce RAM requirements of latency benchmarks by reducing the amount of
memory statically allocated for stacks (both fiber and task). This helps
reduce the memory usage required by microkernel test to below 20kB,
enabling the benchmark to be run on Nucleo-F103RB board. The change was
verified for nucleo_f103rb and qemu_x86 boards.
Change-Id: If5990d107f0fcfabd12ade82f97e7a1a13f8421c
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
Remove x86 specific includes. Add Cortex-M specific instruction pipeline
flush helper. Microkernel benchmark has been verified to work on STM32
MINI A15 (STM32F103VET) board. Due to memory constraints, Nucleo-F103RB
can only run a nanokernel version of the benchmark.
Change-Id: I2e49c240d6985ceb5643551397d6e0a8cc65b3c6
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
This allows to excersize different kconfig configurations in
single app. Thanks to this other samples don't have to get
extra extra options enabled just to improve test build coverage.
Change-Id: Ie5d261f3d38c60e227cf963d938b6fac6d0fb3b9
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Now start discovery GAP function interprets scan type flags (active,
passive) and starts discovery with specific LE scan parameters.
Change-Id: Iecb942e24d68790966afe893d3543433c33192dc
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
Since user_data can be added with gatt_db_add, Set Value
command handler can be simplified.
Change-Id: I86d3ed411cc897488e9073492ff85e0754b2ab93
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This moves both the Bluetooth HCI and NBLE drivers under
"Bluetooth Drivers" category. This also adds a selection for
choosing Bluetooth stacks as the bulk of both HCI and NBLE stacks
cannot be compiled together.
Note that this does not move the source files. That should be
done in a separate change.
Change-Id: I32fa7097ada0fdc52bcc745adb78c7273f4023c6
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
With this patch BTP error will be returned if attribute with
requested ID don't exist in GATT attribute database.
Change-Id: Ic6125c6359e75a80fb9a51b6a527ee0a98628e6d
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Test didn't work unless the specific board was noted in the Makefile.
This scales horribly. Assume no floating point / sse unless specifically
mentioned.
Change-Id: Id1eaa88cdf971a8843e2418661e6a8dba6a1b91d
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This allows to initiate BR/EDR connection with specified address.
Change-Id: I99f0d7dff29384926d3bf739831c7460a7fb5f68
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Rationale for defaulting to IAMCU variant is that our most
interesting x86 boards use this calling convention. --all
will test both.
Change-Id: Idaddfec51a74ae85691d348adeeb88a8528060ea
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This reverts commit b1a0041de6.
This breaks sanitychecks in CI. The early_sleep kernel test case is failing
randomly.
Change-Id: I129b649f7010da90f52616f6fd63eec8b63f8247
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This reverts commit f9d1d56153.
This breaks sanitychecks in CI. The early_sleep kernel test case is failing
randomly.
Change-Id: I4b21f926198af9f0703f042fc170226ed6ab4331
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Adds the sanity test to integrate the kernel object tracing
API. The test implements the philosophers demo and adds
an additional test thread that uses the kernel object tracing
API and test for the correct output.
Change-Id: I2f01f7b3386afd4783ae58b5311eb7d6ee5a3cea
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
Origin: Original
Test fails in CI, disabling until we have a resolution.
Change-Id: Ie8e1ca00b08238c2c2a4feefbe08140c762e6d2f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This adds a GAP service sample and make use of it in shell test which had
a copy of this code.
Change-Id: I5f03fb7db5349236e41bc30eb884c134136439e3
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Test verifies that a task_sleep() function can be used during the system
initialization, then it tests that when the k_server() starts, task_sleep()
call makes another task run.
For fibers, test that fiber_sleep() called during the system
initialization puts a fiber to sleep for the provided amount of ticks,
then check that fiber_sleep() called from a fiber running on the
fully functioning microkernel puts that fiber to sleep for the proiveded
amount of ticks.
Change-Id: Ibe20ca1ca966575aaaad0b6ffd66ca43512801f0
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Clear subscription allowing to test subscribe / unsubscribe in
sequence.
Change-Id: Ife8b994410107f05c23687e3fb23b4a81cad8ce7
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This adds support for get supported commands of l2cap service.
Change-Id: Ic3e2b6502c05a5784d1fd01af0e47cce11e6d2c9
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This patch adds initial declaration of l2cap service in tester
application.
Change-Id: I9bd729bc351b2fe135e7b5b80262b45eaf70b10b
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
bt_auth_cancel can be used to cancel any type of pairing.
Change-Id: Ia1a6ba834186ab6d5082d3eb473319c2d70cf4a7
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This patch makes adding attributes more clean.
Attribute UUID and user data are now added along with the attribute
in gatt_db_add function. Thanks to that, some static variables have
been deleted, and the code is more readable.
Change-Id: I510bd7a1a9ae0210dd90520212a340ee1a3b2b53
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
bluetooth/shell and bluetooth/tester need to be disabled on
galileo and minnowboard respectively. On these platforms,
the IRQ for the UART console and the H4 are the same IRQ line.
IRQ_CONNECT() is being called on the same IRQ line twice, and
it's only through linker luck that these tests work at all
since one driver will "win" when the mapping is set up at build
time by gen_idt.
gen_idt was supposed to break the build in this situation but
was bugged. The next patch in the series fixes gen_idt.
Change-Id: Ib4a42b57181731121dfad50606c8362a9fd0277d
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
GAP_CONNECT bit was missing in supported commands.
Change-Id: I9d009c55327ae67bed38c45b7c11fb67665e1cd0
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch makes opcodes to be in the sequence.
Supported commmands is form now uint8_t array, so this resolves
the problem with endianess as well.
Change-Id: I602a58081948dbbf5e0d83cbb12a118a5990b9f8
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
The 'test_sleep' nanokernel project tests the following functionality:
1. Normal expiration of fiber_sleep()
2. Waking a sleeping fiber via fiber_fiber_wakeup()
3. Waking a sleeping fiber via isr_fiber_wakeup()
4. Waking a sleeping fiber via task_fiber_wakeup()
5. Normal expiration of task_sleep()
Change-Id: Ie51997ace9a4413f62d77daacd6dff97b6b3a4dd
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Instead of returning a 'void *', the nanokernel fiber_delayed_start()
family of routines now return a handle of type nano_thread_id_t.
Consequently, the nanokernel fiber_delayed_start_cancel() family of
routines now accept a parameter of type nano_thread_id_t instead of
'void *'.
The complete list of affected nanokernel routines is:
fiber_delayed_start() fiber_delayed_start_cancel()
fiber_fiber_delayed_start() fiber_fiber_delayed_start_cancel()
task_fiber_delayed_start() task_fiber_delayed_start_cancel()
Change-Id: Ibd4658df3ef07e79a81b7643a8be9ea5ffe08ba0
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
CCC user data is already available on the initialization
(struct bt_gatt_ccc_cfg and ccc_cfg_changed callback).
Change-Id: Id06c69b6da33f651bc049983179cd6fe3bc197d6
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This removes a bit of redundant code.
gatt_buf_reserve can call gatt_buf_add with data set to NULL, to
reserve space on gatt_buf.
Change-Id: I533a515bbd022a07ba8e2bfb3cd07e1a9ff8878b
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Defined BT_UUID for the header can be used instead of struct member.
Change-Id: I55ca069d04622450e4fbb1e3f7abf6fdef2f8f30
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Since the return value of these callbacks is a number of bytes ssize_t
is more appropriate than int.
Change-Id: I3406fb382975d62f51e7a195666d0ae88364fd2c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Instead of manually creating bit shifts for individual bits use the
BIT() macro that exists for this purpose.
Change-Id: I599ecc16b3a2cffe8a355e19816c405e51937e91
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There is no point having separate handlers for signed writes and
write without response commands because both call the same,
bt_gatt_write_without_response function.
Change-Id: Ib033ffb77e2123dd565e8f1119ef668253f810f9
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This board is not supported and not available for general public.
Use the Quark SE CRB/Devboard instead.
Change-Id: Id0f8c08bbacb812ef00fe9502b4acecf4f31ffd7
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Introduce BT_GATT_ERR macro to make it possible for application
callbacks to return exact ATT error codes.
Change-Id: I971536508e75036fbddc40b3f33e5201e11940bc
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This splits Authorization permission to Read with Authorization
and Write with Authorization.
Some attribites may be readable with no authorizarion, but writable
with authorization defined by a higher layer specification or be
implementation specific (eg. Server Characteristic Configuration
Descriptor).
Change-Id: I341a7095c1e8db1dea92cdeebf76c5a2307a49a1
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Makes shell output readable by disabling extensive debug from UART
driver.
Change-Id: Ic8df252c8ca4abd6b021db11d266f4db80df4b09
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
To exclude platform platform_exclude=foo should be used and not
platform_whitelist=!foo.
Change-Id: I4cddcd3b73e0bd8c42a0726776f8237ebd79a6ae
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Use common config for tests and use testcase.ini for defining micro
and nano kernel variants.
Change-Id: I47453cd49696dd496cc728cc1eb2eba9cf7f1c6c
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
There is no need to have spearate app for H5 testing as init test can
use multiple configuration targets.
Change-Id: I467b5939ae914e7c1ac22fdac24d8b0b6ed3f1cf
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Combine both nano and micro tests and cleanup whitelisting
for the testcases to include all buildable boards.
Change-Id: I28d41b82fb60d75d4b172d9dd3ac7e71480053b8
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The init, init_h5 and shell are not really samples but fit better in
the test category.
Change-Id: Id1a7ff31ad8767f858705bd952311cf64ff1f3f2
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Manage this test using one testcase.ini for both nano and micro
kernel cases.
Change-Id: I9757299cdced17e7fcbfa1fbbbcf87693b48bf41
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
eliminate one directory level since we only have one kernel variant.
Remove one level in the hierarchy.
Change-Id: I0924b5a40357b1a892f7ed3ecf512f617edc99a3
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
eliminate one directory level since we only have one kernel variant.
Change-Id: I53dc387c15c6a6efc74f88c477015b2e422c5d6c
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
eliminate one directory level since we only have one kernel variant.
Change-Id: I72597e8253d027cd134dd58cc3051f21dce376d0
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
eliminate one directory level since we only have one kernel variant.
Change-Id: Ia9f457db372729f403be24c7a502a896623db5b9
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
eliminate one directory level since we only have one kernel variant.
Change-Id: I7d7c31e7dc5b98ad8ea0ad9e17a05694ac89770a
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
All SoC specific driver tests go to samples/drivers.
Change-Id: Ia9aa2140465320a548504ddb7a44569e2d2af6bd
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This test should be under tests and is not a sample.
Change-Id: Ibb42207f72554516a650625a2cf4cc9cb7a0b021
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
All 'real' sample application now reside under samples/ directly.
the nano and micro variants will be under the specific sample directory
and not split across the file system.
Change-Id: I0ddf929cff7a29749aa4944b4385af058d9cc74c
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Make the test case routines reside under tests.
Change-Id: Iea59a68e8b537954250d63923a88df267639e716
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move aio and i2c driver test cases to tests/ and change Makefiles
accordingly where applicable.
Change-Id: I28f24997f147dcd188973555df6024c44f3fb6e8
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move all kernel testcases to tests/ and change Makefiles
accordingly where applicable.
Change-Id: I130cc3919174e93b7130d55fb101bed1d5d7552d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move all bluetooth testcases to tests/ and change Makefiles
accordingly where applicable.
Also fix Makefile to make some variables overridable and reduce
level of whitelisting in testcase.ini.
Change-Id: Ia71ee1fbbb238c45280b1e3c4747ca2f748f5263
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Michael Hope
