This patch adds clock control to the counters based on Timer 0 and 1.
Jira: ZEP-1300
Change-Id: I14499a833fe9720496ab7905bc1466e9b03bb316
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
This patch adds a common interface for timers and counters based on
CMSDK APB timers.
Jira: ZEP-1300
Change-Id: I1f89f674d31410f19b651cd904c79f8d173a5357
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
The NXP copyright should not have 'Semiconductors, Inc' in it.
Change-Id: I6e290146d49bf22d1d40b7fa764bb53b6b122303
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The commit c90e4d063be0ff5f47df45ca8500eff8518c5d25 changed
line 216 in drivers/gpio/gpio_stm32.c:
-elif CONFIG_SOC_SERIES_STM32F4X
+#elif /* CONFIG_SOC_SERIES_STM32F4X */
This causes the following compiler error:
zephyr/drivers/gpio/gpio_stm32.c:218:39: error: #elif with no expression
#elif /* CONFIG_SOC_SERIES_STM32F4X */
^
Change-Id: Ie8b124931e333aa7860e6db22f5c259670e29833
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Now that we have a more generic mcux serial driver, remove the uart_k20
driver.
Jira: ZEP-719
Change-Id: I51a3237454140feabbfe18ac2c8ee451e572c7be
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds a shim layer around the mcux uart driver to adapt it to the Zephyr
serial interface. Unlike the existing (and confusingly-named) uart_k20
driver, this driver can be used for k64 and other Kinetis SoCs.
Implements polling and interrupt-driven serial interface functions that
are logically equivalent to the uart_k20 driver. Adds an extra instance,
irq_tx_empty(), and err_check() that aren't implemented in the uart_k20
driver.
Jira: ZEP-719
Change-Id: Iab99542e7ec921ef4f361437768113fee01e5fe8
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Implementation includes adding some defines in the pinmux,
adjusting gpio driver to specific defines for STM32F3X family,
adding specific functionality in the F3X SoC definition.
Change-Id: I465c66eb93e7afb43166c4585c852e284b0d6e67
Signed-off-by: Adam Podogrocki <adam.podogrocki@rndity.com>
FXOS8700_THREAD_PRIORITY and FXOS8700_THREAD_STACK_SIZE need to also
depend on FXOS8700_TRIGGER, else they will not show in the fxos8700
menu entry when running "make menuconfig".
Change-Id: I8f59125157f046592f3c92dcf2a92bd0e407cd6a
Signed-off-by: Bogdan Davidoaia <bogdan.davidoaia@linaro.org>
The rationale for removing fragments while sending them is to free the
memory they're using as soon as possible. This worked fine because
most protocols implemented initially did not require any
retransmission, so the upper layers were never holding an extra
reference to the buffer (& their fragments).
This is not the case anymore, as the TCP layer holds a reference to
a buffer (& fragments) while confirmation from the peer has not been
received, allowing retransmission.
With this change, the fragments of a buffer are not removed when being
sent by the SLIP layer; however, the buffer is still deferenced when the
transmission is complete. If nothing else holds a reference, all the
fragments are returned to their respective pools, like before.
Change-Id: I74966d72f6970b66f526ea0b765101077c843de2
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
All sample applicatons in Zephyr, using the ENC28J60 driver, set
the ETH_ENC28J60_0_GPIO_PIN Kconfig variable to 19.
However, in the Kconfig.enc28j60 file this variable is set to 24.
That default value, 24, was used only during the first iterations
of this driver and never used again.
In this patch, we set the Kconfig variable to 19 and simplify
project configuration files by removing one line.
Change-Id: I3d5fd9da04a3f10845d2a409de56f5b9c235e995
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This is one of the series of patches that simplifies the driver
code by using the IS_ENABLED macro. This removes the need of the
const variable and the three wrapper functions on semaphore APIs.
Jira: ZEP-1251
Change-Id: I5102e8674663ddbfc65220de72c8b778a9ec726c
Signed-off-by: Kuo-Lang Tseng <kuo-lang.tseng@intel.com>
This is one of the series of patches that simplifies the driver
code by using the IS_ENABLED macro. This removes the need of the
const variable and the three wrapper functions on semaphore APIs.
Jira: ZEP-1251
Change-Id: I2ea0b2d04252d6b28e7d5ca528480234545e6eed
Signed-off-by: Kuo-Lang Tseng <kuo-lang.tseng@intel.com>
There was a recent change to the license boilerplate of the entire
source tree, however as this spi.c was just recently added it missed
the change.
Change-Id: Icc95084a4b051266beaf1796c31d9aec9da538d0
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.
Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.
Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file. Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.
Jira: ZEP-1457
Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Remove an unnecessary condition check in Kconfig.
All the config options already depend on I2C.
Change-Id: Ia8876442652df9f105e862d8c2db394699c81f63
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
This driver acts as a pass-through, taking raw HCI data, converting
it to SPI comms and vice versa. It works in the same way as the
existing H:4 and H:5 drivers, only it uses SPI instead of UART.
In this first release, the only BLE board which has been tested is
the X-NUCLEO-IDB05A1:
http://www.st.com/en/ecosystems/x-nucleo-idb05a1.html
Although the current supported SPI format works like the one below,
it should be trivial to adapt it to support other chips with a
different format.
SANITY CHECK = 0x02
SPI WRITE = 0x0A
SPI READ = 0x0B
Tx Format:
[HOST] {SPI WRITE} 0x00 0x00 0x00 0x00 {HCI MESSAGE ...}
[CHIP] {SANITY CHECK} {FLASH SIZE} 0x00 0x00 0x00 {0xFF * MESSAGE LEN}
Rx Format:
{IRQ LINE GOES HIGH}
[HOST] {SPI READ} 0x00 0x00 0x00 0x00 {0xFF * BYTES TO READ}
[CHIP] 0x02 {FLASH SIZE} 0x00 {BYTES TO READ} 0x00 {HCI MESSAGE ...}
Change-Id: I4a00711c922d9ea02c5e2afb0d16715e413b1ed5
Signed-off-by: Lee Jones <lee.jones@linaro.org>
This file doesn't even include <bluetooth/log.h> so any tricks on
BT_DBG are completely pointless (and wrong after the recent update to
the debug logging API).
Change-Id: I1b2b7942a11a4f7229dc35aa2701b3180dc35a28
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The new IS_ENABLED macro allows exposing conditionally enabled code
always to the compiler, even though it may not ultimately end up being
built. This is in particular useful for letting the compiler catch any
logging format string errors. Introduce a new BT_DBG_ENABLED macro
that c-files need to define before including <bluetooth/log.h> in
order to choose whether BT_DBG() logs are enabled or not.
When no Bluetooth logs are enabled the patch also modifies the log
macros to have the format strings checked with the help of the
__printf_like annotation and empty static inline functions.
Change-Id: Ie6bc8e10727b5b306f3ed0f94089a07a22583d9b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
With the use of the IS_ENABLED macro
(https://gerrit.zephyrproject.org/r/#/c/9882), the driver
reentrancy code is simplified:
The original const variable which used to serve the purpose of
making the build to compile out the reentrancy code when the
reentrancy configuration flag is not enabled is no longer
needed as the use of the IS_ENABLED macro achieves the same result.
Also the original 3 wrapper functions around semaphores API are
not necessary; instead, just use the semaphore API directly.
Jira: ZEP-1251
Change-Id: I23552b77d19044dc94de443018759cb3ec10a52b
Signed-off-by: Kuo-Lang Tseng <kuo-lang.tseng@intel.com>
Remove the type field from the sensor value structure. All values will
have the type previously defined by SENSOR_VALUE_TYPE_INT_PLUS_MICRO.
This simplifies the interface, as apps will know what value type to
expect. Apps that prefer to use double values can optain them using the
sensor_value_to_double function.
Change-Id: I3588d74258030eb16c3f89d8eead13cca4606b18
Signed-off-by: Bogdan Davidoaia <bogdan.davidoaia@linaro.org>
tested with blinky, button and disco apps
Change-Id: I4b520d4f3e42c97e4a723747ce4a6c67ca9f1d18
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
riscv-qemu UART:
1) comprises only one register that is used to send or
receive characters in a polling fashion.
2) does not have a FIFO and is not interrupt-driven.
Change-Id: I9408f1776eba4cec4aa203a5da759ec04bcddf1f
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
The riscv-qemu timer driver does not implement
TICKLESS_IDLE
Change-Id: I3eeb5abb05b3f16b55ab9343c2045295b3010cfd
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
The pulpino_timer driver does not implement TICKLESS_IDLE
for the time being.
Change-Id: I0cce8c8a7e203d551a924863462e6c86af4c98ff
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
Add common log level for all IEEE802154 drivers.
Change-Id: If92c96b14e630d4482aadf9cacb25662d6663399
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Force-align all variables defined via asm .word to ensure 4-byte
alignment.
The straddled_tick_on_idle_enter variable was a bool, which resolved in
an one-byte quantity. Changing it to a 32-bit integer. It would have
occupied 4 bytes anyway with alignment.
Fixes ZEP-1549.
Change-Id: If5e0aa1a75dbc73d896b44616f059d221fe191c6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The k64 pinmux driver was deprecated when the more generic mcux pinmux
driver was added, but it can actually just be removed because it is not
a public interface. Applications should be using the public pinmux API,
not the private k64 pinmux API. There was one case in the net samples
that used the private API which was cleaned up in a previous patch.
Change-Id: I49a6397baa57973930cb63bd2a9883b14f7ddafd
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Now that we have a more generic mcux gpio driver that can be used across
multiple Kinetis SoCs, remove the specific k64 gpio driver.
Jira: ZEP-1394
Change-Id: I177f96a75e441b70c523e74e99f1b7a54eac6b0e
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds a new mcux gpio driver that can be used for k64 and other Kinetis
SoCs. This driver uses mcux CMSIS register accesses to the GPIO and PORT
modules. Some of the logic from the k64 gpio driver was reused and
refactored (mainly flag parsing and callback handling).
Jira: ZEP-1394
Change-Id: If5e9390861c181ec555dce6569b14debb729526a
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Changes the init level for the mcux pinmux driver from POST_KERNEL to
PRE_KERNEL_1. This will allow moving the uart console pins from the k64
soc init to the board pinmux tables.
Change-Id: I6d3377c9a689c12711c84387f74843ca9488df52
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Renames the ksdk random generator shim driver to mcux.
Change-Id: I8bc376937fed3024c809782139a0a72c7332f89a
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The ksdk pinmux dev driver was previously merged into the regular ksdk
pinmux driver, and the config PINMUX_DEV_KSDK was removed. Two
references were inadvertantly left behind, so remove them now.
Change-Id: I77394be5459d55a9f16e7bd2b3c9d688c4605b4f
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Merges the ksdk pinmux dev driver into the regular ksdk pinmux driver,
which now exposes the public pinmux API. Removes the private ksdk pinmux
API and converts the frdm_k64f and hexiwear_k64 boards to use the public
pinmux API.
Jira: ZEP-958, ZEP-1432
Change-Id: Ie5f60b604133093050b9c596050cad776d7b7cb3
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
On the nRF5x platforms we need always need the NRF_RTC_TIMER and it
depends on the CLOCK_CONTROL_NRF5. So enable all of these always.
Fixes issues if one tries to build nRF5x platforms w/o CONFIG_BLUETOOTH.
Change-Id: I0f9af785e785f37ec289a935ddf70ee6dec08cd4
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Remove legacy option and use SYS_CLOCK_EXISTS where appropriate.
Change-Id: I3d524ea2776e638683f0196c0cc342359d5d810f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Remove aio disabling code before calling callback. If aio is
disabled before callback is invoked, calling pending
interrupt check API in the callback will get negative result.
If user wants to disable the aio, it can do this in callback
instead of this being done blindly before callback.
Jira: ZEP-1437
Change-Id: I42ebe4584af6396ac2360152f9b0e2c389c44145
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
drivers/gpio/gpio_pcal9535a.c defines a nano_timer,
but never uses it. So delete it.
gpio_sch.c uses a k_timer, but gpio_sch.h defines a
nano_timer. So change the variable poll_timer to
type k_timer.
Jira: ZEP-1525
Change-Id: I884e4703c1ace61da5be7d9c63e58e7c3bce7f68
Signed-off-by: Qiu Peiyang <peiyangx.qiu@intel.com>
The sensor_attr_set() wrapper deals with drivers that do not support
the attribute set API, there is no need to provide a per driver
implementation that only return -ENOTSUP.
Change-Id: I1568ab018988fc560bd89ab96f2f2256ddd5b7e1
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
UART 16750 is basically a UART 16550 with a 64-bytes FIFO.
The 64-bytes FIFO can be enabled via register FCR.
Account for it in the uart_ns16550 driver whenever the
CONFIG_UART_NS16750 variable is set.
Change-Id: I2342b28a41d03c96410bbfbe57e4b5a4e335731d
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
Since RTTWriteNoLock is not thread-safe or preemptable, it is necessary
to lock interrupts around the calls to it.
Change-id: I38b7e37a0f46e77bf82c1e07d549414393e84a51
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Since callers of bt_recv() have so far anyway been required to know in
which context to call it (based on e.g. bt_hci_evt_is_prio) it's
cleaner to have two separate APIs: bt_recv and bt_recv_prio.
Change-Id: Icd0d9aed9c51ffd2def31432c4ffcc16a9f13ccd
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Use interrupt based transmission instead of polling.
Change-Id: Iebfd67372044d3e6de9bdbdd6f0c9c6d01d46cb9
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
So far the use of k_sem meant that there was no major benefit of
having more than 2 or 3 RX buffers since there was no queuing
mechanism. Instead of using k_sem, introduce a k_fifo and use that to
queue up incoming buffers. This way the RX buffer count can be
increased with measurable effects on throughput.
Change-Id: I8122b233aeee7c8e145de3fff5f10bcfe348efaa
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The H:5 HCI driver doesn't need the type-specific bt_buf allocation
helpers.
Change-Id: Iccb9803f32f3143f1cdf972d9229124816a99aa6
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Completely redesign the H:4 driver to utilize its own thread and
select the new RECV_IS_RX_THREAD Kconfig option.
Jira: ZEP-1483
Change-Id: I0ca0661b66d564e5edc1b8505706d6bb76632e79
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This option has not been used so far and will only contribute
unnecessary complexity in subsequent patches that introduce a concept
of combined RX buffers.
Change-Id: I53e0ce5155eebc352b84ba41b30ecb9d9958699f
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This helps simplify code that was previously combining net_buf_add()
with memcpy().
Change-Id: If44cf9cd651aba5e544e36567869f147468663eb
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This moves the shell component into its own subsys and groups all
related files and options into a single place.
Additionally, one Kconfig option will now be required to enable the
shell:
CONFIG_CONSOLE_SHELL=y
The header files was also moved to include/shell/shell.h and can be now
referenced with
#include <shell/shell.h>
instead of
#include <misc/shell.h>
Updated documentation as well.
Change-Id: Iffbba4acfa05408055e9fd28dffa213451351f94
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
replace include <nanokernel.h> with <kernel.h> everywhere and also fix
any remaining mentions of nanokernel.
Keep the legacy samples/tests as is.
Change-Id: Iac48447bd191e83f21a719c69dc26233216d08dc
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Introduce random device API analgous to other device driver classes in
Zephyr. Modify the the KSDK random driver to implement the API.
We retain the sys_rand32_get() interface for now on the assumption it
will eventually relocate to or be otherwise replaced by an entropy
management system.
The existing TEST_RANDOM_GENERATOR related drivers that do not
generate entropy are not modified to expose this driver API since they
cannot generate entropy.
Change-Id: I60b2d5afddf242e802a1d9014c99579870fb7472
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
The GPIO_INT_LEVEL value is zero so the mask assignement
is never executed. Using the bit complement GPIO_INT_EDGE
the proper mask is assigned
This issue was reported by Coverity
Coverity-CID: 151966
Change-Id: Iacfeb6466388023bd6123ba86280aa9ca15f34e4
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Not all users are in an ISR context where we can't block, so give the
callers the freedom to choose if they want to block or not.
Jira: ZEP-1481
Change-Id: I19bd7e2df94c4eeb60886a17a78f872bd7bea887
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When CONFIG_SYS_POWER_DEEP_SLEEP is enabled, spi_qmsi_ss will
keep entering deep sleep because it needs to wait until the
current transfer completes, which blocks the current thread.
The system keeps entering deep sleep again and again and the
transfer will never complete.
Add device_busy_set() to spi_qmsi_ss driver to indicate that
the device is busy and block the system from entering deep
sleep during transaction.
Jira: ZEP-1488
Change-Id: I5a4456933249def93eaa529b30b99d730af74482
Signed-off-by: Qiu Peiyang <peiyangx.qiu@intel.com>
When CONFIG_SYS_POWER_DEEP_SLEEP is enabled, i2c_qmsi_ss will
keep entering deep sleep because it needs to wait until the
current transfer completes, which blocks the current thread.
The system keeps entering deep sleep again and again and the
transfer will never complete.
Add device_busy_set() to i2c_qmsi_ss driver to indicate that
the device is busy and block the system from entering deep
sleep during transaction.
Jira: ZEP-1487
Change-Id: Ia681d242349bce5a9867e54df4e65dba09005930
Signed-off-by: Qiu Peiyang <peiyangx.qiu@intel.com>
Enable arc to access the i2c controller on I/O fabric.
There are two i2c controllers on quark se SoC. One is attached
to the I/O fabric and the other one is in the sensor system.
X86 cpu is only able to access the i2c controller on the I/O
fabric and the access is supported by existing code. HW allows
arc to access both controllers. But, the existing code only
gives arc access to the controller in the sensor sub-system.
Let's grant arc the access to the controller on I/O fabric as
well by the following changes.
1. Add i2c_qmsi.c into arc compilation.
2. Use the already defined macros to choose interrupt numbers
and do interrupt unmasking automatically based on the
compilation targets.
3. Add new symbols in Kconfig including driver names for both
controllers
Jira: ZEP-1189
Change-Id: I317da6038c50e0c8bd16f446182c1f8bdf6d3ba2
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Enable arc to access the spi controller on I/O fabric.
There are two spi controllers on quark se SoC. One is attached
to the I/O fabric and the other one is in the sensor system.
X86 cpu is only able to access the spi controller on the I/O
fabric and the access is supported by existing code. HW allows
arc to access both controllers. But, the existing code only
gives arc access to the controller in the sensor sub-system.
Let's grant arc the access to the controller on I/O fabric as
well by the following changes.
1. Add spi_qmsi.c into arc compilation.
2. Use the already defined macros to choose interrupt numbers
and do interrupt unmasking automatically based on the
compilation targets.
3. Add new symbols in Kconfig including driver names for both
controllers
Jira: ZEP-1190
Change-Id: I40a5d423d4b7986a897834d1a3831938005eda6f
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Use new kernel header file and k_sleep from unified
kernel instead of nano timer.
Change-Id: I1c98c07f880382eaa87f6e0c45967a4b8b6bfd7d
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
From code inspection, the driver always took timeouts in milliseconds.
The only sub-ms wait uses k_busy_wait(), which has microseconds
granularity, but its granularity does not depend on the system clock
tick rate.
Change-Id: If48363fd1fbeeb8e5ff0f0f2ca86e671d63bc571
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
It receives a timeout in ms, but was still converting it to ticks, while
the unified kernel API takes a value in ms.
Change-Id: I8ff7f44090716385764fe4b2a087043a2e0d70af
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Adds optional support for tap and double tap sensor triggers to the
fxos8700 driver using the pulse detection hardware function.
Default configuration values were taken from NXP AN4072, section 6.3.
http://cache.nxp.com/assets/documents/data/en/application-notes/AN4072.pdf
Change-Id: Ia95091628a853eb956f6fd1df099a9e6e101b707
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The GPIO_INT_LEVEL and GPIO_INT_ACTIVE_LOW values are zero so the
statements are never executed then is better use the bit complement
masks
This issue was reported by Coverity
Coverity-CID: 157586
Change-Id: Ic8b20660a991dd3d0c71248f84c917e5ce5c3c7c
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Remove the existing code that iterates over k_sem_give() and setup the
initial counter directly, take the opportunity to set the maximum count.
Change-Id: Ib91ea263567ff761e4953c142a22a56658efe293
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
The shell_cmd structure has three parameters and only two were
initialized. So, this commit initializes the remaining parameter
and also adds the ARG_UNUSED macro to avoid compiler warnings.
Change-Id: I667a4e9839ec5acd526df0bb465beb2062518315
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Remove the unused argument and comparing int to unsigned int
compiler warnings.
Change-Id: Iad79ec2ef8206b2494875a93551a0f47e234ff8d
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Use the right data-type to avoid compiler warnings.
Change-Id: I3e807482c5636f37ef1288689450dbe3c9c04dcf
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This patch adds the ARG_UNUSED macros to some function
arguments to avoid compiler warnings.
Change-Id: I628aea55d98cf8519c046ae5835e95cfa70a973f
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
To support interrupt-based GPIO callbacks in the nRF5x series one needs
to use the GPIOTE module, which has a series of channels that can be
programmed to trigger interrupts on level changes.
This commit adds basic support for the GPIOTE module within the nRF5x
GPIO driver, as well as callback support in order for basic buttons and
switches to work.
Change-Id: I9ae600f894372ad42b09a18cc38a90fc29abb0df
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
To make way for the upcoming blinky and GPIO support for nRF5x-based
boards, this change addresses the hardcoded dependencies in Kconfig
default configurations of the different boards, moving the common option
defaults to the SoC default configuration itself.
Change-Id: I8db0750311ad5a12b76237b39438376f20f6f496
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The pinmux configuration is done during board initialization.
This was validated using the following Zephyr apps:
- samples/basic/blinky
- samples/basic/disco
- samples/basic/button
All 4 GPIO ports are supported.
Change-Id: If8599a23c1d56cfd678a6e2e5339f7e093c6061a
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
The new Nordic MDK redefines certain UART signal names for backwards
compatibility with the new nRF52840 IC.
This patch addresses the potential name conflict between the redefined
signals and the existing variable names defined in the UART driver.
JIRA: ZEP-1418
Change-Id: I559d9335d2eeaa0a88d3f261b70508a1c98b989d
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Move logging out of misc/ to its own subsystem. Anything related to
logging and any new logging features or backends could be added here
instead of the generic location in misc/ which is overcrowded with
options that are not related to eachother.
Jira: ZEP-1467
Change-Id: If6a3ea625c3a3562a7a61a0ba5fd7e6ca75518ba
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
rename NANOKERNEL_TICKLESS_IDLE_SUPPORTED to
TICKLESS_IDLE_SUPPORTED and remove nanokernel occurances in Kconfig
files.
Make TICKLESS_IDLE depend on hardware that supports it.
Change-Id: I6a2e4fb0f7cf4b45475b48e71823ea089ee98759
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
PRINTK was conflicting, reanme to DBG.
Jira: ZEP-953
Change-Id: If5d6ef385c5ed223f6f7eae9bde887ae4a1b946a
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
That module is not used anymore: it was introduced pre-Zephyr to add
some kind of awareness when debugging ARM Cortex-M3 code with GDB but
was never really used by anyone. It has bitrotted, and with the recent
move of the tTCS and tNANO data structures to common _kernel and
k_thread, it does not even compile anymore.
Jira: ZEP-1284, ZEP-951
Change-Id: Ic9afed00f4229324fe5d2aa97dc6f1c935953244
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The ethernet controller being a freescale one, let's use its OUI. Then
only 3 bytes are needed for generating the rest of the MAC address.
Also, generating the MAC address in the right order.
Change-Id: Id3346ef44f8c24edc2e23dee6ac0581ac58cf4ff
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Left over from old IP stack it seems.
Change-Id: Ic7ce731b8661294125fa0e0e058570aeff7b97cf
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Such stack size might vary if debug is enabled or not and depending also
on other factors. Let's do the same for priority as well, putting it to
high prio as default (15 is way too low level).
Change-Id: I16afab33895085bacdef087fe70adeb1ae3ca2ab
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
ll_len means link layer length, but it's misleading here as ll_len is
the whole net buffer length: reserved ll length + payload length.
Change-Id: If7ec0fc950245d370fa0f82ae1050b05c11c7b90
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
ETHERNET is a left-over from old and now unavailable IP stack.
Change-Id: I488d9ffcfb1fe3589b522dc2d620873daeb892c8
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Note: This driver need to be ported to new native IP stack in order to
be available again.
Change-Id: I7825c8679e66f8a1d44d75c9d53e9da207b743af
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
At this point, if the frame was accepted by the controller, it means
that CRC was valid. Thus, there is no reason to get it in the buffer.
Let's just pop it out from controller's memory.
Jira: ZEP-1361
Change-Id: Ic8681c77b0afa30583c7fae281db1a89ff97ed2b
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Directly use AON GPIO trigger instead of IPM.
In the past, SW did not allow arc to receive AON GPIO interrupt.
So, interrupt from BMI160 was routed to x86 cpu. Then, x86 cpu
passed the event to arc through IPM. But, SW was updated and arc
is able to directly receive interrupt from AON GPIO now. So, IPM
is not needed any more. Let's remove IPM related code and use
GPIO as the default trigger source.
This change is on top of the bmi160 sample app change to not use
IPM.
Change-Id: I49d8040764d03b24e09d89e66643c020ef63a3c9
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
The nRF RTC driver, which is used a system clock driver due to the lack
of SysTick hardware on the SoC, was using too much CPU time in its
_timer_idle_exit() implementation due to the use of 64-bit arithmetical
operations. This was causing the ISR wrapper to add excessive latency to
critical interrupts, causing BLE controller asserts.
This patch addresses the issue by using exclusively RTC ticks instead of
OS ticks, thus avoiding the necessity to convert during
_timer_idle_exit() calls, which are the most critical to interrupt
latency.
In addition the driver is now able to detect setting tick events in the
past due to it being interrupted by a higher priority context, and will
reschedule and trigger the ISR at the same time.
Change-id: I56a3be96b9fdd554c3650012d647af2f0415eb8a
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
There are static initializer macros available for most kernel objects
which we should use whenever possible.
Change-Id: I496f4d05d26801eddd21fae53bdd4fcdc3246fe3
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When going into DEEP_SLEEP state, the ARC timer
needs to be restored.
This implements the function to restore the timer
after sleep.
As the time spent during sleep is not currently known,
the timer is expired to reschedule the application task.
Jira: ZEP-1224
Change-Id: I22a30d0fd79f177cf166b9a29dc78d68f7d7fbad
Signed-off-by: Julien Delayen <julien.delayen@intel.com>
In order to resume the ARC from deep sleep,
the interrupts need to be restored.
The FIRQ stack needs to be saved and restored
when performing sleep operations.
During early initialization, the sp in the 2nd register bank
is made to refer to _firq_stack.
This allows for the FIRQ handler to use its own stack.
Fast Interrupts cannot be used after sleep if this information
is not restored.
This patch adds the suspend and resume functions.
Jira: ZEP-1223
Change-Id: Ic81980f05aee6c1f7b8c46c743f2648c65b29486
Signed-off-by: Julien Delayen <julien.delayen@intel.com>
Move interrupt initialization for the ARC to its own
device. The init function for the arc will be only
doing platform specific operations
Jira: ZEP-1288
Change-Id: Icb04c3622890021c65cd24cecf6cafee6c37caf9
Signed-off-by: Julien Delayen <julien.delayen@intel.com>
In order to keep the initialization process light-weight, remove
net_buf_pool_init() and instead perform the initialization of the pool
and buffers in a "lazy" manner. This means storing more information
in the pool, and removing any 'const' members from net_buf. Since
there are no more const members in net_buf the buffer array can be
declared with __noinit, which further reduces initialization overhead.
Change-Id: Ia126af101c2727c130651b697dcba99d159a1c76
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Restructure the RANDOM Kconfig to match the structure used in other
drivers with a single top level menu. Move the true random number
generators to appear first in the menu, with pseudo generators at the
bottom. Do not present pseudo generators if a true random generator
is presented.
This change implies that tests, samples and applications that require
the random driver interface must now select CONFIG_RANDOM_GENERATOR.
In order for tests and samples to build (and run) on platforms that
have no random driver it remains necessary to select
the CONFIG_TEST_RANDOM_GENERATOR.
Note that CONFIG_TEST_RANDOM_GENERATOR retains its original purpose of
enabling a random driver that delivers non random numbers for the
purpose of testing only.
Change-Id: I2e28e44b4adf800e64a885aefe36a52da8aa455a
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Update drivers to return INT_PLUS_MICRO values instead of doubles.
This hides the fact that the drivers use floating point operations and
doesn't force the application to use them as well.
Change-Id: I14c6faecb35331c2fdbdab41bc624d751de984b8
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
Use integers for sensor value calculations in which doubles are not
required.
Change-Id: I8662023ca596cb232e31849b0b77ae2bf0372cf0
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
Remove SENSOR_VALUE_TYPE_INT as it is the same as
SENSOR_VALUE_TYPE_INT_PLUS_MICRO with val2 set to 0.
Change-Id: If5a9c579b7267701c27f40fd887acae47d64edc5
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
Until now it has been necessary to separately define a k_fifo and
an array of buffers when creating net_buf pools. This has been a bit
of an inconvenience as well as blurred the line of what exactly
constitutes the "pool".
This patch removes the NET_BUF_POOL() macro and replaces it with a
NET_BUF_POOL_DEFINE() macro that internally expands into the buffer
array and new net_buf_pool struct with a given name:
NET_BUF_POOL_DEFINE(pool_name, ...);
Having a dedicated context struct for the pool has the added benefit
that we can start moving there net_buf members that have the same
value for all buffers from the same pool. The first such member that
gets moved is the destroy callback, thus shrinking net_buf by four
bytes. Another potential candidate is the user_data_size, however
right not that's left out since it would just leave 2 bytes of padding
in net_buf (i.e. not influence its size). Another common value is
buf->size, however that one is also used by net_buf_simple and can
therefore not be moved.
This patch also splits getting buffers from a FIFO and allocating a
new buffer from a pool into two separate APIs: net_buf_get and
net_buf_alloc, thus simplifying the APIs and their usage. There is no
separate 'reserve_head' parameter anymore when allocating, rather the
user is expected to call net_buf_reserve() afterwards if something
else than 0 headroom is desired.
Change-Id: Id91b1e5c2be2deb1274dde47f5edebfe29af383a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This issue was reported by Coverity
Coverity-CID: 157621
Change-Id: I7f84c0868467ab55e033aecac037967da001a6db
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Device sync APIs are actually wrappers for semaphores.
Let's replace them with semaphores.
Jira: ZEP-1411
Change-Id: Ic37972a631f0bfd7bc45f28088e1c423151b1612
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Device sync APIs are actually wrappers for semaphores.
Let's replace them with semaphores.
Jira: ZEP-1411
Change-Id: I02c7cba21d21ff9288e452121e3b7ebb7d251bb4
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Device sync APIs are actually wrappers for semaphores.
Let's replace them with semaphores.
Jira: ZEP-1411
Change-Id: I5662057222aec54f02db9d9cdcd7f4f006c6c530
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Use the SYS_INIT() mechanism to invoke the sys_rand32_init() function
in random drivers that require an initializer. Remove all empty
sys_rand32_init() instances.
The existing explicit sys_rand32_init() function runs immediately after
PRE_KERNEL_2 before stack canaries are initialized. In order to get
equivalent behaviour with sys_rand32_init() we set SYS_INIT() to
initialize the random drivers at the lowest priority of PRE_KERNEL_2.
Change-Id: I4521e44daac806bc4eef01ce7fdf2ba5367e0587
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Basic interrupt driven driver for the nRF5 onboard temperature sensor.
Change-Id: Id0ac303293b8e8b8285b19bcda31284ee6617105
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Now that we have a more generic ksdk pinmux driver that can be used
across multiple Kinetis SoCs, deprecate the specific k64 pinmux driver.
Jira: ZEP-1393
Change-Id: I11cfe9a53746a6e85eced2a7cecf0396d42a7a19
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Kinetis SoCs contain one or more PORT modules to handle pin muxing and
pin configuration. Unlike the existing k64 pinmux driver, this driver
handles each PORT module individually and can be used for other Kinetis
SoCs.
This driver uses KSDK CMSIS register accesses to the PORT module rather
than the KSDK PORT driver (fsl_port.h), because the Zephyr pinmux
interface contains both set() and get() functions to access the pin
configuration. The KSDK PORT driver only contains a set() function
(which is a very thin static inline function to modify the PCR
register), therefore building a shim on top of it would result in a
strange mix of using the KSDK PORT driver for the set() and a direct
CMSIS register access for the get().
Jira: ZEP-1393
Change-Id: I2f7c6b08b207350697d590dcd665223f81de9f9e
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
subdir-ccflags-y +=-I${srctree}/subsys/net/ip isn't need so lets
remove it.
Change-Id: I60d97ce25398d7d3801e837075dbf75d1375e055
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
ccflags-y += -I$(srctree)/kernel/unified/include isn't need so lets
remove it.
Change-Id: I910bbac4a189de965d844f5fc36571e8dcb5705d
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We can locally reference the file we need, so don't add a -I we don't
need.
Change-Id: I4d9507d5368073443dcc78a5821fe09d3e0b9bfc
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We can locally reference the files we need, so don't add a -I we
don't need.
Change-Id: I764aea4177a8995489e0f15f71f7373427b43394
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
There's now snprintk available that's more light-weight on the stack
than snprintf.
Change-Id: I6b3e4409703ca92fe6b8f4146ff47c490ab826cb
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The SYS_LOG macros now map to printk by default, and printk doesn't
(currently) support %2.2x, rather %02x needs to be used instead (it
gives the same result).
Change-Id: I0f7a5b7da91afba0c970bce7e2680de40c917bd3
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Fix compilation issues that show up if SYS_LOG is mapped to printk
instead of printf. Unlike printf, printk is annotated so that the
compiler catches incorrect format specifiers passed to it.
Change-Id: I4d6f635a0ed61de698727028ea8767dc0ef28bb1
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Provide PWM driver for STM32 series F1/F4/L4.
Driver is ported on STM32Cube HAL and should support other STM32
series with minor updates.
Configuration is done so that PWM sample driver could be run on
all nucleo boards supporting PWM driver.
Change-Id: I6522a565451085df932e0eefd8404268380b5bfe
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add pin config for PWM support on ST Nucleo boards
Following config is chosen:
-PA0/PWM2_CH1 for F401RE and L476RG
-PA8/PWM1_CH2 for F103RB
Change-Id: I013e15ed35360d7777bb24ff94e0830f913a6580
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This patch adds Timer 0 and 1 to be used as counters.
Jira: ZEP-1300
Change-Id: I9d8b971d8a3d76eee2f9cc4600e95729d67717a3
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Add driver for CMSDK (Cortex-M System Design Kit) APB WDOG. This device
uses NMI as interrupt hence it requires Runtime NMI (CONFIG_RUNTIME_NMI)
to be configured in the platform.
Tested with drivers/watchdog sample application.
Jira: ZEP-1300
Change-Id: Ib318047109af81e32060e80d456ef3873fd380ea
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
This patch enables the clock control interface into the ARM LTD
CMSDK APB UART driver.
Jira: ZEP-1300
Change-Id: Ic0a214beb02d56ffb02ad4e6ca26b80805c0a4e6
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
This patch enables the clock control interface into the ARM LTD
Beetle GPIO driver.
Jira: ZEP-1300
Change-Id: I576767b68a8e4aa965d34716528df3bb4e837d73
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
This patch adds the clock_control implementation for the ARM LTD
Beetle platform.
The main features enabled are:
* Clock on and off in ACTIVE, SLEEP and DEEPSLEEP mode.
* PLL support (freq: 12, 36, 48 Mhz).
The integration with the existing drivers will be done in future
patches.
Jira: ZEP-1300
Change-Id: I07cb2325275bd86a036e8e24aeb7bbf2c6176a93
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Add board support for the Nucleo64 L476RG development board.
Change-Id: Ibb5424bc936c67a5d96855617202136d7dea772c
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add the I2C for the STM32Lx series
Change-Id: Id1694aeb3606b4fa9772bfb7a9f60e48a7cc93a8
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add all possible pin assignment definitions for I2C{1-3} on STM32L4xx.
Change-Id: I2d4266bc3bb9ba41b74a80567c0b04a89963753e
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add macro for all the available pinmux for the USARTs present on
STM32L4.
Change-Id: Ie4352750e1c6f08642b3e222b57f2a791f08ef74
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add EXTI support for the STM32l4XX family.
Change-Id: Ia92f26eaf49899ea23fae05dd3a7357007c9db20
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add the support for all the GPIO port of the L4.
Change-Id: Id365e17223cd5c49443df9fb6b96a3c4f204f523
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add the clock driver for the STM32L4 series.
Change-Id: Icdf79061f163d8d00187b382d1564422fb875c5b
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Deal with STM32L4X additions for clock and interrupt handling to the
uart driver.
Change-Id: I6e8dafb132dafea54b8f31a3a5cb6e35a207574d
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
There was a misalignment between Zephyr UART device numbering and
SoC UART IP. Device "UART_1" was mapped to IP USART_2, which could
be confusing for user.
This commit allows to align "UART_1" to IP USART_1.
Change is propagated to all STM32F103RB/STM32F401RE based boards and
respective pinmux drivers
Change-Id: Ia8099dfeec7b9c0c686c2a58ccb4dbb1a55b6537
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
STM32Cube based implementation allows single driver file for
all stm32 based SoCs.
By maximizing code reuse, use of STM32Cube eases new SoCs
porting into Zephyr and provides better maintanability and
maturity.
Change-Id: Ief4b723add3dfc8b2a839683559c5a4c5d5eb837
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This commit replaces the nanokernel.h include by kernel.h.
Change-Id: Ib42fbf2d9f77a73c0831f569b3dbbfb342ea2e1d
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Adds general sensor triggering support to the fxos8700 driver, including
options for the driver to use its own thread or the global workqueue
thread to handle sensor interrupts. Adds specific support to handle the
data ready sensor trigger.
Jira: ZEP-1395
Change-Id: I092f22e35747b92a88eb71a3d162a4fc16227b45
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This patch fixes RX overflow error in the k64 SPI driver.
Jira: ZEP-1351
Jira: ZEP-1352
Several circumstances lead to an RX overflow:
The RFOF_RE (RX fifo overflow) must not be set as default.
The flag is only set when rx_buf is available. Also it must
be checked inside spi_k64_isr whether RFOF_RE has been set or not.
If the rx_buf is not available and the incoming data
should be ignored, then MCR_ROOE need to be set.
Since it is not possible to change the MCR register
during the transfer, RX fifo must be emptied
if rx_buf_len < tx_buf_len.
The driver also uses spi_data.xfer_len now,
the variable was already defined. Now, transfers are also
possible if tx_buf_len < rx_buf_len (e.g. read slave device register).
spi_k64_push_data has been adjusted accordingly.
The patch simplifies the handling of interrupts.
The interrupts are also switched off in the event of an error.
The patch also fixes a few coding style issues.
Change-Id: I6ce81f595bb1edbbf2253b6595602896ca652762
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Remove non existent CONFIG_SPI_DEBUG and replace cnt
with DBG_COUNTER_* macros.
Jira: ZEP-1351
Jira: ZEP-1352
Change-Id: I1fba7aaead1ad0b36297b069e5a83e25b7991588
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Clear RX and TX FIFO before starting transfer fixing RX overflow issue
on FRDM K64F board.
Change-Id: I9345a0058a6c7958a6ecf3dc23b99fe7bff18796
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Logging in spi_k64 driver is based on printf-like functions and does
not make sense with syslog which adds additional information like
function name and new line already.
Change-Id: I84a81ebf5c3cc94b311a2e41bdb5f014432d2b09
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Use configured init priority same way it is used for other SPI
drivers. Default priority initializes SPI before console hiding
possible errors and debug messages.
Change-Id: Iddc9c783290d852caa8a9385de4ab114f8f7a2e3
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Fixes following error:
...
drivers/spi/spi_k64.c:717:86: error: 'cnt' undeclared (first use in
this function)
...
Change-Id: If49fa4838265cd39a6f72eb265388ff7faae9a9e
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The Real Time Terminal functionality of the Segger J-Link
debug probe and software suite allows applications to write
to a certain RAM area that is read in real-time by the
debugger. This is specially useful when a UART is not
available to provide a console.
This commit adds a console driver that outputs over an RTT
"connection".
Change-Id: Ifce8020060e9f519a61f3f1fbe9f56f98da2ef7f
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add function return value check. This was caught by
Coverity.
Coverity-CID: 157124
Change-Id: I93b23325d657dc787300908b9117b6976617fdba
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Fibers do not exist anymore in unified kernel.
Also, let's just use that option directly so removing the internal
define which is then useless.
Change-Id: I1179d84401934b339d3a9ccd12f6145a120bcb2f
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Other driver than QMSI might have this limitation. Let's wait for a
future rework of SPI API to properly fix that.
Change-Id: Ibad382ce86e7479961b275c4851abf88ed581023
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Currently it's only possible to configure those GPIOs through
boards.<h/c> files and thus it's not relevant for board that do not
embed cc2520 but might get one wired to it, unlike
quark_se_c1000_devboard which directly embeds one cc2520.
Change-Id: I819bc1d2de707ea12eb70dc60a40b28f92666e51
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
* Moved networking code into subsys/net.
* Renamed net/yaip to net/ip at the same time.
* Fixed the tests/net to compile
* Fixed the Makefiles and Kconfig files in subsys/net
to use the new location of the IP stack
Change-Id: Ie45d9e8cb45a93fefdf969b20a81e3b1d3c16355
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The cc2520 driver RX thread did not like the stack information
collection macros defined in net_core.h. Both the cc2520 TX and
RX got the same variable name which did not compile.
This is now changed so that the first parameter is added to
the variable name to create a unique variable.
Change-Id: Ia41d01a71afd73af2ef31aa5f7a890a3cf0385aa
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As the native IP stack is now the default, there is no need
for corresponding Kconfig option.
Change-Id: I08e4992f540f928a2b7378e8803e634e38725348
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit removes the legacy Contiki based uIP stack.
The new native IP stack must be used after this commit.
The commit also removes following things:
- legacy cc2520 driver
- legacy ethernet drivers
- legacy IP stack samples
and changes these things:
- disabled tests that only work for legacy IP stack
- select new IP stack by default
- enable random number generator by default as it is needed
by the new IP stack
Change-Id: I1229f9960a4c6654e9ccc6dac14a7efb9394e45d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The default kernel init priority is too low. Make this
configurable and set the default priority so that the
ethernet driver is started just before the network stack.
This commit adds generic ethernet priority and changes
currently available ethernet drivers to use it.
Change-Id: If695e52b6dd9ea227f10ba306bb145d72d2312b0
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Refactor code to exit earlier in case of error.
Change-Id: I9ff893f923ff877d69b0e985bb6e4159504e67cd
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The original commit:
https://gerrit.zephyrproject.org/r/#/c/6256/
has changed because an internal rebase. Two lines adding an SPI
command are missing.
This commit adds back the missing lines.
Change-Id: I5cbeda73ef1eae5eb98dfa3b7f3086b7438da9a9
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
Use the stack declaration macro from net_core.h which
allows user to see more information about stack usage
when using net shell.
Change-Id: Id3cc0fa49c5da79ba7d5573103864f1881e2f2e5
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Hack in commit-id 835f93b8250abc0f3edbee9a99463fccac03597c was breaking
raw mode needed for wpan* adaptations.
Change-Id: If1ff96fa8170cc84e356fb0452e487f0ff174da5
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is a hack, related to:
commit-id 835f93b8250abc0f3edbee9a99463fccac03597c
Change-Id: I7e305cef9ca908e2a71a011920663e1603ad8d6e
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The 802.15.4 frame has a header and in the end after the payload a CRC.
Overall MTU is 127 bytes, but CRC is most likely going to be generated
by the device itself (offloading). Because the limitation of current
nbuf, it's not possible to keep this CRC in the buffer because it
require a user data size of 127 bytes but if we do so, IP stack will
fill in as much as it can as packet data, thus occupying the 2 last
bytes. This generates bugs. A perfect solution would be to generalize a
better handling of MTU and head or tail reserve data into nbuf, but
this will probably be solved in the future.
Change-Id: I1a0fee4d555e2717c1edd5afba399a1f17d9c7a9
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
commit-id 67c465d2cc introduced this
weird format by not removing unnecessary spaces.
Change-Id: I964185c8a894cfcf10e253e6d378c63ec02ad8d7
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Since the whole init level changes: all drivers and most of subsystems
are initialized at level POST_KERNEL. Unfortunately that broke legacy
tweaks on what to start first and after.
Let's raise cc2520 priority, still below net_init.
Jira: ZEP-1261
Change-Id: I0d91aa87a893584b3f5b39a193c823127961402f
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Thus setting a high priority of 2 on the rx fiber, as 0 is invalid.
Change-Id: I44a95f3648ca3fbf2eb699f1fa36963d6f3e5021
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
And take the opportunity to reduce the buffer size, as 127 is the 15.4
MTU, it has just engouh space on 128 bytes for the spi cmd plus the
frame.
Change-Id: Ifdeb83f85ab1adcdebc55bd72c38a98f18a86dbc
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Current value (100) is outside the default values: 0 - 15.
Jira: ZEP-1231
Change-Id: Ib3120b52e6eb3d95b369debd7df541fa2b0dfa6e
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Looks like getting an SFD interruption is not 100% reliable, so let's
just use a semaphore with a timeout on it instead of using
device_sync* routines.
Change-Id: I4e4115c7b939c95d7e75fbb33664d411e0a6e8cc
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Flushing rxfifo is necessary only on complete failure. It's badly
documented, but cc2520 errata mention that srxflush instruction should
be avoided as much as possible because it generates garbage in rxfifo
and kills incoming rx packet.
Change-Id: I486f7f4179103cf0c86c206821a0a61fec06178a
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
15.4 drivers are supposed to append LQI byte in the end of the buffer,
but of course there is no such thing in uart-pipe. Thus the bug, so
let's announce the proper length even if such LQI is missing.
Also align the debug output to proper length (FCS included)
Change-Id: Ib9ad86a8c22e1cf6437bc82e7fce11a489d0e761
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
As there's a single intermediate frame buffer used by both RX and TX
routines, protect operations on it with irq_lock() to avoid possibility
that it will be concurrently modified.
Change-Id: Ibbaf882a15fbb193054dbb13ae848becf9deef3f
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This updates driver for Kinetis SDK Ethernet device (used for example
by BOARD=frdm_k64f) to work with native Zephyr IP stack driver model.
The conversion is done based on the template of eth_enc28j60.c.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Change-Id: Ifb0c7d3f921d663d00a2ded89ecdf2336b6e3783
The register being set before checking the count of the remaining
packets is incorrect, so this code fixes it by setting the proper
register bank before access
Jira: ZEP-1138
Change-Id: Id49ee8439665ff69786f22e13e0d94a2148e4ae7
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
The ENC28J60 hardware module does not support concurrent
transmission and reception.
This fix adds a control semaphore to exclude the execution
of both processes.
Applies the equivalent changes to the legacy driver.
Jira: ZEP-1097
Change-Id: I9602195d5a97f8d4bf652753c284d61f192357fe
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
Tranmission: Consider that fragments are no adjacent.
Reception: Consider receiving data in more than one fragment.
SPI routines: Align SPI fragment size with default buffer fragment
size (128 bytes) for better performance.
Change-Id: I51fc25d8540c36f3719e617a6f33cdea3f63032c
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
Everytime the devices receives a frame with odd length it will
add an extra byte of padding to the reception buffer.
This was causing and issue when receiving frames above 64 bytes
length and with odd length.
This commit pops the extra padding byte everytime the received
frame has an odd length.
The equivalent fix is applied to the legacy driver.
Jira: ZEP-1098
Change-Id: Ib93cbcdcf11f3812961b6702f1b7fa621590aab2
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
When the driver receives or transmits a frames with a length
that is multiple of MAX_BUFFER_LENGTH the last block would be
read/sent twice to spi because a missed calculation on
num_remaining.
The issue is fixed by controling when the remaining bytes are
written/read into the spi device and by setting the spi command
on each spi write/read attempt.
The fix is applied to the legacy driver as well.
Jira: ZEP-1098
Change-Id: Icb2195d74e34dcbcf0c70531da9886ca315bd78b
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
The MAX_BUFFER_LENGTH symbols is now declared in the
eth_ecn28j60_priv.h file.
The legacy driver does not need this declaration here anymore.
Change-Id: I396fe92dbf5679c64183e25fa8b8d342c7f30dae
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
The upper IP stack uses the MAC address to construct the IPv6
address in SLAAC. Because of this the MAC needs to be stored
in big-endian format so that it can be used directly as is.
Change-Id: Ib31da56307017b4284031328772d4cb51d84fa23
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Let's not count the whole buffer length but only the very first frag's.
Up to L2 radio strategy to loop on every fragments and call tx for each.
(once sent, it deletes the fragment, so next fragment is always
buf->frags).
Change-Id: I94130fedfbecffdf62286bcb7f10563c776a255e
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The given buffer can come with many fragments, but it's not up to the
hardware driver to send all of these but only the first in the list.
The overall fragments send procedure is handled in l2 level where the
radio transmission strategy loops over the list of framents and send
them one by one relevantly.
Change-Id: Ia7ae42ab4e9f8efb83bf07de6791918059b1e1c9
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
As we use STXONCCA, RX will be stopped and reinstated afterwards.
We would be using STXON, since FRMCTRL1_SET_RXENMASK_ON_TX bit is set,
behavior would be the same.
Recalibrating the RX will uselessly abort any received frames before TX
or right after RX got reinstated. So, let's not do that and trust that
RX is anyway properly calibrated after TX.
Change-Id: Iac4fa03a175f8d139c1fc821de01caab1ec86e6b
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The fragment count value was incorrectly printed. All
the values > 9 had their last digit chopped off.
Change-Id: I8304b8047baa97995c3927809e4616653c87928b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This change is related to patch called
"net: Adapt to new behavior of net_buf_frag_add"
This version removes extra net_nbuf_unref() from
the code. The unref was done because net_buf_frag_del()
did not remove the double ref from the list element.
Because of the other patch, the list does not have
double ref any more, so we need to remove the extra
unref in couple of extra places.
Change-Id: If90e01c24b9b4e68afbfa283850d2a1ecb3065ed
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Change DBG to ERR for error cases to get errors when only errors are
selected.
Change-Id: I51fd15900b1efb96d5dff36367afcdf380f11b88
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This prepends logs instead of [general] with [cc2520].
Change-Id: I148159a451981fbe3da638732f0e97900f76bc58
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Slip context parameter is not used in hexdump and in few places
it is not defined. So CONFIG_SLIP_DEBUG=y throws errors.
Change-Id: I73ca26b7d5cd7c3cd532462b5300e25bbdac9511
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
ll_reserve is given through each buffer to be sent, it is therefore easy
to get it from there.
Change-Id: I8b52fe1b72065f5f58275f939253942f7db1f136
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
No need to store the mtu locally as the network interface already holds
it.
Change-Id: I4a1c3d164eefa28622dcb6cd510a66a825c3d9fb
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Link Layer reserved space will be handled by relevant L2 layer.
Change-Id: I8e45119adb4de84ba321cad444c11bedef4415e8
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
LQI is actually not provided as is, but should be computed from an
abstract correlation factor. See Section 20.6.
LQI is provided the same way as Linux does, so it can push it everytime
into the buffer.
Change-Id: I5de318db2c2581d7482cc16e41dc601130753a62
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Fixing 80 chars limit by removing length computation:
We can count the FCS as part of the received length, even if AUTOCRC is
on. L2 layer is able to parse this out.
Change-Id: I3c824ed95d177570a07d04784798e14f5979c96b
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
L2 RAW channel allows to use some functions of IP stack for RAW access
of network drivers. It is hidden from user and is selected by 2520 raw
driver.
Change-Id: I91dd09803052072dfddb7989d9d67c3a5840f89e
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add TI CC2520 driver allowing RAW access to radio interface similar
way Bluetooth user channel works. This makes possible to handle radio
channel inside external 802.15.4 stacks, for example export it over USB
and handle in Linux.
Change-Id: I61bb4c8b998ff1e47dc65427ac471f04ec8fea63
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Source contiki headers only for legacy driver
Change-Id: I356fd65ce9a4ee144c29eed1b51f2f0175315c1c
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The bug was introduced by commit ID
a136a2587752cca256950b0efd5567ca29117d11
Which led to write junk as an address into cc2520 and thus made the
chip filtering out all unicast packet (as the incoming address never
matched)
Change-Id: I72009e795039f2059177a5b37a4bcf5d9717d65d
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
As it used directly as the ieee addr.
Propre endianess will have to be solved once this stack will be ported
to other arch than x86.
Change-Id: Ie556fabbd99cc5559025c8392d2f699facb007fa
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
We have no use of configuring cc2520, at built time at least, in
promiscuous mode. So let's get rid of these options for the new driver.
Change-Id: I17611c43bc7ba7961831beaa47cc4e2371f8de61
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This fixes bug setting incorrect long ieee802154 address and also
print address in BE byte order the same way as for Linux.
Change-Id: I774301e992372588dffa6ce5964fb119642a0a0d
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Multipackets support not handled perfectly and breaks regular
flow on some occasions. So remove this support and have to
implement properly.
Change-Id: I1b72c66479c3516df6e6e93998edff1260eb839d
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Print the link layer header in different color so that the
actual IP payload in packets are easier to see. Also the
link layer header of the first packet was not printed.
Change-Id: I99699d378ae28d6d90c683c646c904c926b7dd06
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This driver is used for testing on Qemu where all "radio transmission"
will go through a pipe between 2 Qemus.
Change-Id: I5b4e75de82a98eb730ef9c70b460b4b60c0a60c3
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If no IP stack is seleceted, selecting one of the 2 cc2520 driver will
automatically select the relevant stack.
Change-Id: Icca22da190dc790ce6d302e14c45732f902e02ae
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Or the build will not go through.
Change-Id: I48f5f8661c4100a76e4624ea64d383055327e2a7
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
When only the dummy frame format is enabled, some variables are left
unused, causing some warnings.
Change-Id: Ic7bc5560a9fcb573e715c2cc29f308cec5214f64
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
640 bytes seems too short, raising to 800 bytes.
Change-Id: I8c3418787939369e24fe47c23b0558c36f05af2c
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
net_core.h is loading sys_log.h as well, so we need to be
first in order to setup some local definitions.
Change-Id: Ife482bd21e314aa5a5e88433eb8f9a560f9d53a6
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It's basically a copy/paste of original driver,
using native IP stack API.
This is meant to avoid cluttering the original driver
code with #ifdef, and in future it will help removing
the old driver as well.
Change-Id: I67d974ad7440d258583a5c7c6c7160e99210808c
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Another driver will be made for native IP stack. This is meant
to avoid cluttering the code with #ifdef all over the place.
Instead driver will be transparently selected at built time.
Change-Id: I283f1194fece9357425b87794b5cb51938ca80d3
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Allocate the right amount of space for L2's context.
Change-Id: Ia2f4f4162334e9e9c26dc95230abdfde5986e052
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
No need to partition the data if MTU is large enough and
data can be sent in one frame.
Change-Id: I8ba0f5030ed1e2c1341c7e2dd409ba636b1a9a4c
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Using macros does not let the compiler verifying about the type we are
providing, which usually give an error easier to understand.
Also, this will let the compiler deciding how to actually optimize
(inline or not) the code.
Change-Id: Iba49590b620ef0a1bd0ed5621453524fcfea747c
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If the MTU is bigger than fragment size, we must leave the
fragment link layer header empty so that the received data
count does not get wrong.
Change-Id: I0ed562f39bfbfb559885baa6d774c0383b2228b2
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
There is no harm for doing so but debug prints will look
weird in this case.
Change-Id: I48b6953d07a58bc952fe961cf1db846740dadc50
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
There will be a crash if network device sends data to network
stack before it is ready to receive such data.
Change-Id: I1a32485faba2972909262c4305fb465b6cb87f07
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The code was using NET_DBG() which is not really available
for the slip/tap driver.
Change-Id: I64cedd5fbfb54fdb80d606cf3199312c8871246f
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Easier to see buffer leaks using this variant.
Change-Id: Ibdc8d73133cab4822451104fcd5742e4f1e20e42
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As there is a L2 in the middle, there is no need for
net_if to provide such information.
Change-Id: I58a35d4d124cd8a67026f32e71713ef06f43b7c5
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Net core then does not know anything about l2 related logic.
For instance ARP is used in ethernet l2 API and nowhere else.
This will be helpful when adding different technologies altogether.
Currently, only SLIP driver is enabled to use relevant l2 layer.
Change-Id: I03c93326321028d04222733ca4083e3c6b785202
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2 warnings happens when CONFIG_SLIP_DEBUG is set, thus fixing it.
Change-Id: I032d7481942e86911764da35cdd6f7b8e05cdeaa
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If CONFIG_SLIP_TAP is defined, then ethernet link layer header is
added before the packet.
Change-Id: I3d266017f85683999d3c67de49b75b60686d7ba7
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Renamed net_recv() to net_recv_data() so that the more generic
name can be used by applications. The net_recv_data() is only
meant to be used when L2 layer feeds data into L3 (IP) layer.
Change-Id: Iba155d51f81e3b99964fa916fe87a05a8bf8766a
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Check if we have received IPv4 packet and call a handler
function to process it.
Change-Id: I9f9e5f0888d2c3b91401c98f4925647ddce09962
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The SLIP driver is using UART pipe driver to communicate with
host when Zephyr is running in Qemu. Currently this is only
used by networking sub-system when testing the networking
stack.
Change-Id: I432b4136670766a7fc190f146057924c266f9bea
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This patch refactors the main Kconfig file in order to align it with the
Zephyr code style and to make sure that each Kconfig configuration
portion is easily identifiable.
Change-Id: Ib226aaa9a98e9b08a47d9d1c329f18f4f6936620
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
With the current interface if multiple counters/timers are present in
the system, it is not possible to select from which one to read the
current value.
This patch fixes the behavior.
Change-Id: Id1ae1f2330e98d078f755c0b81c3b176e90b8389
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
This patch refactors the main Kconfig file in order to align it with the
Zephyr code style and to make sure that each Kconfig configuration
portion is easily identifiable.
Change-Id: Iba83be8ae154df4b29ff423b4c3cc97a78c93e00
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
The nRF5x series SoCs do not implement systick, hence we disable
CORTEX_M_SYSTICK.
Instead, use nRF SoC Series NRF_RTC1 for system clock interfaces.
The kernel system clock interface is implemented using the low
power real time counter NRF_RTC1. NRF_RTC0 is used by the BLE
controller.
In addition, cleanup nRF5x series defconfig to be consistent.
Jira: ZEP-742
Jira: ZEP-1308
Jira: ZEP-1315
Change-id: I0f6cc1836fe0820a65f2cbb02cf5ae7e9eb92e1d
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Make the systick feature optional that can be selected by the SoC.
Change-Id: I4a405640b84daecc17fc1882743d3cafb78ff861
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The reference and polarity fields of the config struct which is passed
to qm_set_config are never cleared, meaning the wrong configuration
may be written if aio_set_config is called for different sets of pins
in the same program.
This patch clears these fields in aio_cmp_disable to prevent such an
issue.
Change-Id: I8feabae1f3d9fa4c7260d94c1ec919ef2fb84bfb
Signed-off-by: James Fagan <james.p.fagan@intel.com>
This patch addresses the following issues:
* Aligns the Kconfig code style with Zephyr projects requirements.
* Removes redundant "depends on" from Kconfig.
* Adds static to the containing file scope declarations.
Change-Id: Idaaa0d705a31bc69cdf7e576e303f581d3d0bd5f
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
This patch addresses the following issues:
* Aligns the Kconfig code style with Zephyr projects requirements.
* Removes redundant "depends on" from Kconfig.
* Adds static to the containing file scope declarations.
Change-Id: I14651826724c014cc71d62ab6cab03c668c578c0
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
This patch addresses the following issues:
* Aligns the Kconfig code style with Zephyr projects requirements.
* Removes redundant "depends on" from Kconfig.
* Adds static to the containing file scope declarations.
Change-Id: I6d48d2eaf6ffd5fa28b37e1d3ca2d467705110f3
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
This patch addresses the following issues:
* Aligns the Kconfig code style with Zephyr projects requirements.
* Removes redundant "depends on" from Kconfig.
Change-Id: Ic9e2fd935417fa40127bddeba4660109332087ff
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
This patch addresses the following issues:
* Aligns the Kconfig code style with Zephyr projects requirements.
* Removes redundant "depends on" from Kconfig.
* Adds static to the containing file scope declarations.
Change-Id: I03326a800392cffda00b47949981b7e6d119b90f
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Pinmux driver almost certainly should be initialized before the
rest of hardware devices (which may need specific pins already
configured for them), and usually after generic GPIO drivers.
Thus, its priority should be between KERNEL_INIT_PRIORITY_DEFAULT
(default 40) and KERNEL_INIT_PRIORITY_DEVICE (default 50). Thus,
we set PINMUX_INIT_PRIORITY to 45.
There are exceptions to the rule above for particular boards. For
example, BOARD=galileo has GPIO and pinmuxer on I2C bus and thus
overrides PINMUX_INIT_PRIORITY to be much higher. Note that while
PINMUX_INIT_PRIORITY was defined previously (at 60), it was used
only for galileo, which overrides it anyway.
This fix was prompted by investigation why eth_ksdk driver was
non-functional after kernel priorities re-hashing: both eth_ksdk
and pinmux used the same priority, and eth_ksdk happened to run
before pinmux. While bumping eth_ksdk priority would help in the
particular case, the same would likely reoccur with other drivers
like I2C, SPI, etc.
Change-Id: Ie5ca3135c1ee2fe8d9cf48d5c12e62eac63487f7
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Using the K_* macros makes it easier to read what exactly the various
timeouts are.
Change-Id: Ia405d3760b8e600af7e33a7221ef6ec717708973
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This fixes an always false evaluation of the gpio I/O direction
This issue was reported by Coverity
Coverity-CID: 151978
Change-Id: I93ec3319a3f18d564c961a5cbd9dcc9c60efbeb7
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
The GPIO_INT_ACTIVE_LOW value is zero so the mask assignement is
never executed. Using the bit complement GPIO_INT_ACTIVE_HIGH the
proper mask is assigned
This issue was reported by Coverity
Coverity-CID: 151966
Change-Id: Ibc7d2e4c3ebee249b5ab9719f8177cc14c0d1d33
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
The variable type mismatching was caught by LLVM.
Jira: ZEP-1179
Change-Id: If26c881d207a6cedc52b7589c5d7ebb2040c7ab7
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
The enum type mismatching was caught by LLVM.
Jira: ZEP-1179
Change-Id: I50b68e201ef6fb18a02eeda2a2e7548dad3f358c
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
This fixes an always false evaluation of the gpio I/O direction
This issue was reported by Coverity (CID 150821).
Change-Id: I6c0e9fe405cbd3e35454a81754fa0b1c721691f0
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
This fixes an always false evaluation of the gpio I/O direction
This issue was reported by Coverity
Coverity-CID: 151833
Change-Id: Ie952d6f50c0383d5631325b69e8e8b234c67c4b8
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
This fixes an always false evaluation of the gpio I/O direction
This issue was reported by Coverity
Coverity-CID: 151834
Change-Id: I033e368b2e91d888f2e8a797490df757513c3906
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
This patch adds the "static" keyword to all the functions that have a
containing file scope.
Change-Id: I0692b389da7f4bf591b5e33f7481bf3dcbbf9801
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
This patch adds the "static" keyword to all the functions that have a
containing file scope.
Change-Id: I28e7daef19359759afb09cd196f659a81c758ea1
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
This patch adds the "static" keyword to all the functions that have a
containing file scope.
Change-Id: I12c29f83e5e8a7eb51880d481da17666764b2c2b
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
This patch adds the "static" keyword to all the functions that have a
containing file scope.
Change-Id: Ib05943b53b6863b5b44848ecb2199b7e99d24139
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
This patch addresses the following issues:
* Aligns the Kconfig code style with Zephyr projects requirements.
* Removes redundant "depends on" from Kconfig.
Change-Id: I46a156581cdf79d0ba8f0030ce7b595469db1bcb
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
This patch addresses the following issues:
* Aligns the Kconfig code style with Zephyr projects requirements.
* Removes redundant "depends on" from Kconfig.
* Adds static to the gpio_dw_isr declaration.
* Adds guards to the header files.
Change-Id: I1ae70868f0bda97891cbeb494e5efba1bd537aa1
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
This patch addresses the following issues:
* Aligns the Kconfig code style with Zephyr projects requirements.
* Removes redundant "depends on" from Kconfig.
Change-Id: I4c8df0999f92a834d4023ce5856a2a6c39797c00
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
This patch removes a redundant "depends on" from the gpio Kconfig for
nRF5X family.
Change-Id: I28ac15b58839e05f47ade81bef66a03a0a44bebd
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
This patch addresses the following issues:
* Aligns the Kconfig code style with Zephyr projects requirements.
* Removes redundant "depends on" from Kconfig.
* Adds static to the gpio_sam3_init declaration.
Change-Id: If5c8a1822d6c116ea34d0f220f3e5fa359b6fa18
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
This patch fixes an unreachable code condition in the uart_console
driver.
If UART_CONSOLE_DEBUG_SERVER_HOOKS was not defined
handled_by_debug_server in console_out was always 0.
This issue was reported by Coverity (CID 131627).
Change-Id: I4376c3e5b3e68220218df6aabd91b6a8900ca31f
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
This patch fixes two "Unchecked return value" conditions into the bma280
driver.
The issue was reported by Coverity (CID 151953).
Change-Id: I2e595b67619411594cec527f358f6c3d3d034550
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
This fixes an uninitialized pointer being pass and evaluated by
a subsequent function
This issue was reported by Coverity (CID 150824)
Change-Id: If1f636a44cc675b56e426b1de85895b74ba7105e
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
The variable type mismatching was caught by LLVM.
Jira: ZEP-1179
Change-Id: I1193a946ea5814510e6c07668c5d05a5d91445a8
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
This patch fixes unchecked return value conditions in the bme280
driver.
This issue was reported by Coverity (CID 151961, 151959, 151955).
Change-Id: I3a2dfbabd41ae52b00fa512a40e00c2e36c3b5ca
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
This patch fixes a less-than-zero comparison of an unsigned value
condition present in bmi160 driver.
This issue was reported by Coverity (CID 152002, 152003).
Change-Id: I703066519652ac1ecdd9ddf7e97ec7dcbe2a9e27
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Move away from legacy APIs and use unified kenrel instead.
Change-Id: Icae86beec66df1b041405cbe3455913630fc8ad1
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use unified kernel APIs and align syntax after function name changes.
Change-Id: I028f4faeaf33e28197d5f705063459188272027d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Switch left-over usage of TICKS_NONE and TICKS_UNLIMITED to the new
unified kernel counterparts K_NO_WAIT and K_FOREVER.
Change-Id: I2f2a16360e816f9f8791eb216deb3c70b8cc87df
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The NBLE driver is now deprecated and will be removed in a future
Zephyr version.
Change-Id: I50753f8cf8566ac1e4e73df480c96253c199e6a7
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There was a lot of duplication between architectures for the definition
of threads and the "nanokernel" guts. These have been consolidated.
Now, a common file kernel/unified/include/kernel_structs.h holds the
common definitions. Architectures provide two files to complement it:
kernel_arch_data.h and kernel_arch_func.h. The first one contains at
least the struct _thread_arch and struct _kernel_arch data structures,
as well as the struct _callee_saved and struct _caller_saved register
layouts. The second file contains anything that needs what is provided
by the common stuff in kernel_structs.h. Those two files are only meant
to be included in kernel_structs.h in very specific locations.
The thread data structure has been separated into three major parts:
common struct _thread_base and struct k_thread, and arch-specific struct
_thread_arch. The first and third ones are included in the second.
The struct s_NANO data structure has been split into two: common struct
_kernel and arch-specific struct _kernel_arch. The latter is included in
the former.
Offsets files have also changed: nano_offsets.h has been renamed
kernel_offsets.h and is still included by the arch-specific offsets.c.
Also, since the thread and kernel data structures are now made of
sub-structures, offsets have to be added to make up the full offset.
Some of these additions have been consolidated in shorter symbols,
available from kernel/unified/include/offsets_short.h, which includes an
arch-specific offsets_arch_short.h. Most of the code include
offsets_short.h now instead of offsets.h.
Change-Id: I084645cb7e6db8db69aeaaf162963fe157045d5a
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Fix compilation error when CONFIG_USB_UART_CONSOLE is not enabled:
drivers/console/uart_console.c: In function 'uart_console_init':
drivers/console/uart_console.c:497:12: error: unused variable 'dtr' [-Werror=unused-variable]
uint32_t dtr = 0;
Change-Id: I592724150f86199f6a57354c3246197db2ac7a01
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add support for console output via the USB UART.
Note that console input via the USB UART doesnt work.
Adds a simulated poll method for UART interface exposed by USB.
Jira : ZEP-775
Change-Id: I357827ea52c027eb000baed80225f422df1f3358
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Add spi flash erase boundary check. The erase boundary must be
4K-aligned. So, the flash chip will round down an non-4K aligned
address to the nearest 4K boundary automatically. As a result of
this, the erase area will start from a different address (if the
API caller specifies an non-4K alighed address), even though the
size of the erased area is the same as what is specified by the
API caller. Let's add a boundary check to make sure the starting
address (from the API caller) is 4K aligned.
Correct an error in the highest address check. Because of the
error, the erase api call will fail if the flash's highest
address byte is involved.
Jira: ZEP-1277 ZEP-1278
Change-Id: I8b6be57cc8f636f94e5fe67d5a492841a8555005
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Add the device_ctrl hook to the ADC driver of the Sensor Subsystem,
using the QMSI APIs to save and restore the driver's context.
Jira: ZEP-667
Change-Id: I8b89a875d8185cc4db3c4bfc30ef0f39c6589df1
Signed-off-by: Iván Briano <ivan.briano@intel.com>
This commit updates the spi_qmsi_ss driver by adding save/restore
context functionality for power management, using the corresponsing
QMSI APIs.
Jira: ZEP-664
Change-Id: I9e62729f91c4808eb557d8a64c0f10955f5456f3
Signed-off-by: JuanX Solano Menacho <juanx.solano.menacho@intel.com>
This commit updates the i2c_qmsi_ss driver by adding save/restore
context functionality for power management, using the corresponsing
QMSI APIs.
Jira: ZEP-666
Change-Id: I36fb18b52edd4dac4c4b6cb98162adbca74800cb
Signed-off-by: JuanX Solano Menacho <juanx.solano.menacho@intel.com>
This commit updates the gpio_qmsi_ss driver by adding save/restore
context functionality for power management, using the corresponsing
QMSI APIs.
Jira: ZEP-665
Change-Id: I5d8b6050f5b099678b7e6d9144907ea2ce2dda4b
Signed-off-by: JuanX Solano Menacho <juanx.solano.menacho@intel.com>
convert all sensor drivers to use threads and the unified kernel API and
remove all legacy APIs.
Change-Id: Ica43ea74ecbbf85273f718f182c413a9dcd8abc6
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move both semaphores and nano_work objects to unified kernel APIs.
Change-Id: Icca8a091063544c451e47201cd8e956b95010513
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add driver for CMSDK APB UART ports. The driver implements RX and TX
functionalities. Data transmission is implemented using polling and
interrupts. The driver default configuration for the port is to use
8bit data transmission, 1 stop bit, no parity control.
The driver exposes a public uart driver API and allows to register up
to five UART devices: from 'UART_0' to 'UART_4'. The driver performs
the required pinmux, the clock control configuration is left to the
platform.
The driver has been verified to work with the Hello World sample
application on a Beetle Board.
Jira: ZEP-1245
Change-Id: I5baf78b7659aae2a574d8e66205e6fd5eb579133
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This patch adds the support for "runtime" pinmux on ARM V2M Beetle.
The GPIO controllers 2 and 3 are reserved and therefore not exposed
by this driver.
Jira: ZEP-1245
Change-Id: I9637f1a0d2bf6a757e1942160fb170165ffe6a0c
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This patch adds the support for the board pinmux initialization on
ARM V2M Beetle.
The GPIO controllers 2 and 3 are reserved and therefore neither exposed
nor configured by this driver.
Jira: ZEP-1245
Change-Id: Id5499c5dd887c319730408eeb30f02eeed1c3699
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The driver is currently used only by the ARM Beetle platform.
Jira: ZEP-1245
Change-Id: I6611edd7486a3c6d82d66a9a96c5d4860dad1539
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This fixes the warnings related to the use of deprecated APIs
converting them to use the unified version.
Change-Id: I76d076de27ecdae4af46abf4baac68e2cc1313c0
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Start using the k_work and k_delayed_work APIs.
Change-Id: Iac0525a444c5c4e0f28db08844d7b28e17e905fc
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Switch to using k_work and k_delayed_work APIs.
Change-Id: I3be18132cc417607adaec0ad711256b94e314c38
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Don't use the deprecated NANOKERNEL init level. The only requirement
for Bluetooth drivers is for them to be registered before the
application main() runs, so POST_KERNEL should be good enough.
Change-Id: I02a8609bf63e9d608b802576214a2e76211b3965
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Use the unified kernel API k_sleep() instead of the deprecated
fiber_sleep().
Change-Id: I587d72ca5b53aacc02647b32c3ebceb1d7fe067e
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Switch to using the unified kernel k_thread_spawn() API instead of
nano_fiber_start().
Change-Id: I325cf467ae2a52c6aec8fc166397c323929e3013
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Use the unified kernel API k_yield() instead of fiber_yield().
Change-Id: I8f52031f52f7ac8783033a51751dc22decdfa59a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Use defines from k_fifo intead of legacy API.
Change-Id: Ib8cf0d88240ef145da550b8cf83d2580e7140521
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
All boolean options default to 'n' without the need to explicitly
state this. It's only the cases where we want 'default y' where we
need to state this.
Change-Id: I47dbda62462ea437a2423b8508ea2cc640a22e41
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Restructure the Bluetooth options more logically.
- Both host and controller are now behind the same high level
CONFIG_BLUETOOTH.
- Selecting controller support disables other HCI driver selection, so
the controller isn't in the same list as HCI drivers any more.
- Under the top-level there's a "Custom stack" option, which when
enabled opens up the option of choosing CONFIG_NBLE.
There are various other cleanups and simplifications in this patch as
well, since splitting these up would have been fairly tricky while
making sure all test cases still build.
Change-Id: I5bb715cb9d20201cb8b72fbd149c8a09a4b2d7d2
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add Low Power States support to the power shim layer
and show the usage in the quark_se sample.
States are defined as follow:
- SYS_POWER_STATE_CPU_LPS: SS2 with LPSS enabled
- SYS_POWER_STATE_CPU_LPS_1: SS2 with LPSS disabled
- SYS_POWER_STATE_CPU_LPS_2: SS1 with LPSS disabled
Jira: ZEP-994
Change-Id: Ie4b93f6e539cb53fc035be00280b66b2cb0d9fea
Signed-off-by: Julien Delayen <julien.delayen@intel.com>
Change the included kernel header file from nanokernel.h to
kernel.h
Change-Id: Ie58174524880ec933191ee1fd46e6c1ba4cd0cc9
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Change the included kernel header file from nanokernel.h
to kernel.h
Change-Id: I754b883d1769517e908e88096e7704666ec12275
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Change the included kernel header file from nanokernel.h
to kernel.h
Change-Id: I76cc952316430d618ea3ecb526d9bc2a99f04cef
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
PRIMARY, SECONDARY, NANOKERNEL, MICROKERNEL init levels are now
deprecated.
New init levels introduced: PRE_KERNEL_1, PRE_KERNEL_2, POST_KERNEL
to replace them.
Most existing code has instances of PRIMARY replaced with PRE_KERNEL_1,
SECONDARY with POST_KERNEL as SECONDARY has had a longstanding bug
where the documentation specified SECONDARY ran before the kernel started
up, but actually ran afterwards.
Change-Id: I771bc634e9caf7f17dbf214a270bc9967eed7d32
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This suppresses warnings for platforms where SERIAL can't be provided.
All the platforms that these drivers are interesting for already
default to SERIAL=y.
Change-Id: Id692f99e018009b30903db8a2c046a6086be01c2
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
USB class drivers may need to offload some work from
upcall interrupt context to a background fiber. This
requires some way to defer taking more data from host
till the offloaded work completes. Two APIs are added to
achieve this.
Further USB class drivers sometimes need to set STALL condition
on end-points to signal errors to host.These too are
added.
Change-Id: Ic973522c3394e23d7f9c4c67affc0cd050afc20f
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Add type cast to prevent overflow.
In the pwm driver function pwm_qmsi_get_cycles_per_sec(),
there is a multiplication which takes ticks_per_us (32 bit
unsigned integer) and USEC_PER_SEC. Practically, overflow
will not happen, since the sys clock is not that high. But,
it can trigger an overflow alarm by automatic tools.
Change-Id: I67e6f6a4763e62f6674fcdd364880d93829e739e
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Add delay to wait for new configuration to take effect before
returning to API caller. It takes time for any change to rtc
configuration to take effect since rtc runs under a much slower
clock.
Of course, we do not have an equation for best wait time.
The value is based on the test results on arduino 101, minfield
and quark se c1000 devboard(some margin added).
Jira: ZEP-991
Change-Id: I0dcee3c5809963dcd418186b85e3473427a4d526
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
This KSDK flash shim driver supports the device in the FRDM K64F
platform (enabled with this commit).
WARNING: the driver disables the system interrupts for potentially
long periods of time. This is required to avoid Read-While-Write
issues since most platforms run in XIP mode.
For more detailed information see the link below:
http://cache.freescale.com/files/32bit/doc/app_note/AN4695.pdf
Change-Id: I70f8d09080251033ce2f45be0c2eb95c19fded08
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
It's unused anywhere and unlikely to be in the future.
Change-Id: I57926e91da7d31ef6ddda4f86e6dac103dbfa176
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Update to QMSI 1.3.1 release.
The only build fix needed was due to the split of the I2C ISR on
qm_isr.h .
Change-Id: Ide7a1537572c72981ec3283dc5cf0d543d9ac7d1
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
The uart_k20 serial driver incorrectly assumed that all instances of the
UART peripheral are driven by the system clock, when actually some
instances are driven by the bus clock (which usually runs at half the
system clock). This caused incorrect baud rate calculations for UART
instances driven by the bus clock (UART2-4).
Change-Id: I38041781cdee146912bb5167e7c71d6416b966b5
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
These pins are routed to the arduino header, and configuring them for
UART signals allows us to use the frdm_k64f with a frdm_kw40z shield
board for bluetooth.
Change-Id: Ie30916409844b1dc1c6e1280d5a755a6dc42e418
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Making a reference to the common work queue code should not necessarily
drag in the system workqueue, since it is possible to use a workqueue
that is not the system workqueue. This is done by moving the system
workqueue into its own code module.
Moving the system workqueue to its own code module allows removing the
NANO_WORKQUEUE and SYSTEM_WORKQUEUE kconfig options, and compiling the
common workqueue code and system workqueue all the time. They are only
linked in the final image if a reference to them exist, same as the
other kernel modules.
Change-Id: I6f48d2542bda24f4702e7c2e317818dd082b3c11
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Move controller code from drivers/controller to
subsys/bluetooth/controller.
Change-Id: I73f675188485aa3267507bad7647796e593a3da0
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Move the Bluetooth host stack from net/bluetooth to
subsys/bluetooth/host. This is preparation for having both host and
controller under the same root, i.e. subsys/bluetooth/.
Change-Id: I3bc796f7e331fca0c485f3890d62b9c03e027b96
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The pinmux configuration is done during board initialization.
This was validated using the following Zephyr apps:
- samples/hello_world
- samples/philosophers
- samples/drivers/uart
- samples/shell
UARTA0 is currently supported.
Change-Id: I85727c622d4d42183cc9f2f8b43d653e245dd17e
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
The shell is not a kernel feature, it is more of a subsystem.
Change-Id: Iaba60b2086ddfe77af427d70b8fc8d06a8bebe14
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add kernel functions to kernel module and make it part
of the shell sample.
Change-Id: If5e8ff8ce7b8edbbb8d62509964700b007eaf88b
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add the definition required to change the pinmux of port H.
Change-Id: I3cc107f9151db4d38fe2cace90cd02d5955a2717
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Some STM32 have more than 32 EXTI lines. Add support for them.
Change-Id: I9a2561664d0d81664acf268bb2257dd99b596a44
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Update the suspend and resume hook after changes in QMSI and the resume
from sleep flow.
Change-Id: I14637b5a29b1942740012243fb8217803cf27e9b
Jira: ZEP-1004
Signed-off-by: Iván Briano <ivan.briano@intel.com>
This commit updates the i2c_qmsi driver by removing the temporary Zephyr
save/restore context implementation and using the new QMSI APIs.
Jira: ZEP-996
Change-Id: I9fbd563f214b757f3435037b3e24da4bcf08da14
Signed-off-by: JuanX Solano Menacho <juanx.solano.menacho@intel.com>
This commit updates the gpio_qmsi driver by removing the temporary
Zephyr save/restore context implementation and using the new QMSI APIs.
Jira: ZEP-999
Change-Id: Ic7b80a8f86baa7a6be11c93bbdebb18a102b0221
Signed-off-by: JuanX Solano Menacho <juanx.solano.menacho@intel.com>
This commit updates the rtc_qmsi driver by modifying the temporary
Zephyr save/restore context implementation and using the new QMSI APIs.
Jira: ZEP-1000
Change-Id: I6f77fe086ea6415a5bc2b2b21874c8a573fd7b44
Signed-off-by: JuanX Solano Menacho <juanx.solano.menacho@intel.com>
Signed-off-by: Iván Briano <ivan.briano@intel.com>
This commit updates the spi_qmsi driver by removing the temporary Zephyr
save/restore context implementation and using the new QMSI APIs.
Jira: ZEP-997
Change-Id: I70c6838025253d13d6ebe690ec90dfc1b18bfcea
Signed-off-by: JuanX Solano Menacho <juanx.solano.menacho@intel.com>
This commit updates the pwm_qmsi driver by removing the temporary Zephyr
save/restore context implementation and using the new QMSI APIs.
Jira: ZEP-1008
Change-Id: Ic92feeb906539f506eb521b7302f8cf5af3edc64
Signed-off-by: JuanX Solano Menacho <juanx.solano.menacho@intel.com>
Remove the Zephyr implementation and
update the uart_qmsi driver to use new QMSI PM APIs.
Jira: ZEP-998
Change-Id: I418e6384c16e374e9062820e12648a2d524a312d
Signed-off-by: JuanX Solano Menacho <juanx.solano.menacho@intel.com>
Remove the Zephyr implementation and
update the wdt_qmsi driver to use new QMSI PM APIs.
Jira: ZEP-1001
Change-Id: I4d0a2e3b8cf402b457ee0454650080d406eb6d0a
Signed-off-by: JuanX Solano Menacho <juanx.solano.menacho@intel.com>
For AON peripherals on Quark SE C1000, an API is needed
to retrieve the interrupt status after wake up.
This enables the application to know the wake source before
enabling again the interrupts.
Add this API to the rtc as this is a wake event
on Quark SE C1000.
Jira: ZEP-1188
Change-Id: Id850ce405eb3f4857be720201e462ea8e24a334f
Signed-off-by: Julien Delayen <julien.delayen@intel.com>
For AON peripherals on Quark SE C1000, an API is needed
to retrieve the interrupt status after wake up.
This enables the application to know the wake source before
enabling again the interrupts.
Add this API to the gpio as this is a wake event
on Quark SE C1000.
Jira: ZEP-1188
Change-Id: Icc4aa6617bf18402b7e5dc3aab779ec2964e1c5b
Signed-off-by: Julien Delayen <julien.delayen@intel.com>
For AON peripherals on Quark SE C1000, an API is needed
to retrieve the interrupt status after wake up.
This enables the application to know the wake source before
enabling again the interrupts.
Add this API to the aio comparator as this is a wake event
on Quark SE C1000.
Jira: ZEP-1188
Change-Id: Ifa08353270910a363c15a4203770ff3e7857572b
Signed-off-by: Julien Delayen <julien.delayen@intel.com>
For AON peripherals on Quark SE C1000, an API is needed
to retrieve the interrupt status after wake up.
This enables the application to know the wake source before
enabling again the interrupts.
Add this API to the periodic timer as this is a wake event
on Quark SE C1000.
Jira: ZEP-1188
Change-Id: I79976230bccb1f970b6856d28bf7428175167828
Signed-off-by: Julien Delayen <julien.delayen@intel.com>
In ST CMSIS files, FLASH_BASE does not mean base address of FLASH register
Instead FLASH_R_BASE is used.
stm32f1 clock control driver is updated to be compatible with this naming.
Change-Id: Ic4fb49c60c392e15fd12c69266baf4c686bd343b
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
There is no need for copying command string to temporary variable on
the stack.
Change-Id: I41fd2582600908ac523b87c83a426eef27d1c454
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This fix commands tab completion and make it similar to Linux shell
completion:
- single match complets command and add space at the end
- multi match lists matched commands and complete common part
- no match does nothing
Change-Id: Ib2d90889c79e8d35a78b8847d2b9e124cdc00a6c
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Add the necessary infrstructure to support power management for the
QMSI Flash driver. If deep sleep is supported, this driver supports
saving its context to be restored on resume.
Jira: ZEP-1006
Change-Id: Ied88e86d13ef9e4e62bd6ac9d8454d9a9a3d2962
Signed-off-by: Iván Briano <ivan.briano@intel.com>
Add the necessary infrastructure to support power management for the
QMSI DMA driver. If deep sleep is supported, this driver supports
saving its context to be restored on resume.
Jira: ZEP-1005
Change-Id: I49f1f985eb0f250c777c6950178715fb794db537
Signed-off-by: Iván Briano <ivan.briano@intel.com>
The GPIO and AON GPIO ports are available to both the x86 and ARC
cores, but the driver always assumed only the x86 at the time of
configuring interrupts.
Use the available macros to set the correct values independently of
which core it's being built for.
Jira: ZEP-1030
Change-Id: I310afcc48780fbe1cac9dc3368a6de11bd797fda
Signed-off-by: Iván Briano <ivan.briano@intel.com>
The SoC level peripherals are accesible by both cores, while the SS
ones are only available to the sensor subsystem. Since the ARC core can
make use of both drivers at the same time, we need to be able to
differentiate their configuration values somehow.
Also disable the SoC GPIO for the ARC by default, as it still needs
more changes to be usable.
Jira: ZEP-1030
Change-Id: Ic5415c404ecd32a3e560467b6f5eaa873a515d72
Signed-off-by: Iván Briano <ivan.briano@intel.com>
Use the macros provided by QMSI (or by ourselves, when QMSI doesn't
have them yet) to register interrupts independently of which core it's
building for.
Change-Id: I83fd7e42598b45aef8132316906a3bff291dfe92
Signed-off-by: Iván Briano <ivan.briano@intel.com>
The callback from the QMSI driver now can take a data pointer to pass
to the given function, so use that to pass the device to our callback
instead of defining one function for each supported port.
Change-Id: I82d863314e0443b7c4a12d4a9ad763b9634ca8e2
Signed-off-by: Iván Briano <ivan.briano@intel.com>
If application prompt handler returns NULL curently selected module
prompt should also be checked before of printing default shell prompt.
Change-Id: Iba9c191041951c31036766b1cc8070b040655445
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Ability to use Zephyr shell by multiple modules simultaneously, each
module for its own usage.
Old shell implementation enabled the user to call only one module
commands, not all of the modules simultaneously.
Change-Id: I0ef8fa2fd190b7490c44fe91d1016363258302c9
Signed-off-by: Yael Avramovich <yael.avramovich@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In the unified kernel legacy layer, both these functions are
implemented as #defines which can't be put in a struct.
Eventually this driver should be updated to use new APIs, but
this will get it to at least build which is the priority.
Change-Id: Ic5dfb5b85ff3bd0d1646f542340642549a2b2e05
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This allows to delete character after cursor.
Change-Id: I9acc5e1edeb688ea4ec36e91aef69ecb5f5f6354
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This allows to navigate to begining and end of the line easily.
Change-Id: I3a839a0499961d55574a310c65811dd2fe048703
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
In 3 of our UART driver implementations the ISR is exclusively
used and enabled for the RX path. The existing logic was
susceptible to a stall situation where a polled out transmission
would be interrupted by a reception and then the ISR code
would loop forever due to the TX event being signalled (although
the interrupt itself was disabled) causing the ISR to keep
looping for an RX interrupt.
Change-Id: Ic379e58b1c974aca3cee37d2d81f12c3726fb160
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
These options were only needed for a MyNewt-based nRF51 firmware on
these boards (the MyNewt BLE stack is called Nimble, hence the
prj_nimble.conf sample config files). With a Zephyr-based nRF51
firmware these options are no-longer needed, so it's not appropriate
to have them default to enabled. Instead, if they are needed, require
the app-specific configuration to enable them.
Change-Id: Iefbee4d97590af4e11bcedea05fe61f32a147b83
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
qm_interrupt.h is not needed.
Change-Id: Ia9e62db9fc39ee7a8a36e087eb447cbc4a419817
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Implement qmsi shim driver based on the new API interfaces.
Recently, a RFC was sent and discussed on the re-design of
PWM interfaces. A API change was already posted.
The API new design will deprecate all existing APIs and three
new APIs will be added. The new APIs are pwm_pin_set_cycles,
pwm_pin_set_usec and pwm_get_cycles_per_sec. Pwm_pin_set_cycles
and pwm_pin_set_usec will rely on two driver functions to set
the period and pulse width. This change is to implement the
driver functions pwm_qmsi_pin_set and pwm_qmsi_get_cycles_per_
sec.
Jira: ZEP-745
Change-Id: I39bb973f8c5b19cb7dbd496d10e7f0b6735efc12
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Update the QMSI drop we maintain in Zephyr, and fix the build where
needed:
- QM_SCSS_INT is renamed to QM_INTERRUPT_ROUTER;
- every member of QM_INTERRUPT_ROUTER was renamed as well;
- QM_IRQ_* renamed too, mostly added _INT at the end;
- some isr functions were renamed to keep their names consistent;
- build for x86 needs to define QM_LAKEMONT, as QM_SENSOR was for ARC.
Change-Id: I459029ca0d373f6c831e2bb8ebd52402a55994d1
Signed-off-by: Iván Briano <ivan.briano@intel.com>
Add support for the STM32F401 chip on the board
Change-Id: I96c0799f3658ecea096fa5971bce9faf21919ee1
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Change the clock accessors to a tuple of bus ID of the subsystem and enable
bits for the device - it is clearer to read than the opaque pointers.
Change-Id: I9ae73c222c04adac4cf2bc06e97f4ec199bdac3c
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
STM32F401 allows for upto 16 alternate functions on each pin.
Change-Id: Ib1c14fd31abaa2b05a5ab0f7bd1b4a4748f10f84
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Implements MCU-specific GPIO input interrupt integration. Added
definition of System configuration controller as well as its needed by
the GPIO code.
The SYSCFG controller is used for system-specific configuration such as:
- remap the type of memory accessible at address 0x00000000
- manage the external interrupt line connection to GPIOs
- configure the I/O compensation cell
Change-Id: Id2ebfbd1b21e77be76406d1cd6cd5d4989e9e2fa
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Based on the STM32F10x driver. Removing old code as we need to use the
bus number when dealing with 4 possible peripherals.
Change-Id: Id0263aa008e9b039ff9a00339e5622e289ffdf99
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This patch adds support for the STMicroelectronics STM32F4x family in the
STM32 MCU line. Configuration is included for the STM32F401RE MCU.
Acknowledgements to Pawel Wodnicki's earlier submission from February that
was used as a starting point for this port. In the end, we rewrote all of it.
Change-Id: I9797c282ac3c0cc66a63b9d34821de95df537ef6
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
The correct layout for help text is <TAB><SPACE><SPACE>.
Change-Id: Ief4167e75709e358089f701041ac06386351f423
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Fix issues with tab vs space as well as missing license/copyright
header in hci/Kconfig.
Change-Id: Id766308dc8eda2d598ea749e5e0d2166014db929
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The bt_driver API was created when Zephyr only had a Bluetooth host
stack, but no controller-side functionality. The only "driver" that
was needed for the host was the HCI driver, and hence "HCI" was
omitted from the name.
With support both for host and controller Zephyr will be getting more
Bluetooth driver types, in particular radio drivers. To prepare for
this, move all HCI drivers to drivers/bluetooth/hci/ and rename the
bt_driver API bt_hci_driver.
Change-Id: I82829da80aa61f26c2bb2005380f1e88d069ac7d
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Since RSSI events trigger interrupts and signal the RX path
semaphore with a resulting event lenght of 0. Due to this
fact the Controller HCI driver was leaking (i.e. not freeing)
those events, grinding the recv_fiber to a halt.
Issue identified by Szymon Janc.
Change-Id: I3e259b2823717b523ac331f8f787252414fb9290
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Report the HCI version supported by the Controller as 4.2,
since it was set as 0 (1.0b) and this confused certain Host
implementations, such as BlueZ.
Change-Id: I809721ee9c2b55e77e6a3ca63688c802a9ffa0ba
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The grove sensors use the sensor interface, so make them depend
on it just like the other sensors.
Change-Id: I9b62a3fa26f54dd683c65ca154c1af7c7c92772f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Set DMA transfer to QM_DMA_TYPE_SINGLE for all channels.
This keeps the previous behavior as of QMSI 1.1.
In the future, we may consider adding support for using other DMA
transfer types. This, however, will demand adding new API to Zephyr's
dma.h .
Change-Id: I8071555190662a72279069ff9fce3d4b9e861629
Signed-off-by: Maciej Kuc <maciejx.kuc@intel.com>
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
STM32F4 requires the alternative function config to be set, so just
initialize that as part of the gpio configure call.
Change-Id: I33a4a8efec59c5ebe7dc3f3580f0dd2bf7ded7f4
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Adds basic sensor driver support for the NXP FXOS8700 6-axis
accelerometer/magnetometer. Currently this driver supports
accelerometer-only, magnetometer-only, and hybrid (accelerometer +
magnetometer) modes, as well as 2g, 4g, and 8g accelerometer full scale
ranges.
This driver does not yet support any sensor triggers such as the data
ready trigger, or runtime changing of sensor attributes.
Datasheet:
http://cache.nxp.com/files/sensors/doc/data_sheet/FXOS8700CQ.pdf
Origin: Original
Jira: ZEP-721
Change-Id: Iff0f751c737196f60d5c5d3448631b57093ece34
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Change-Id: I6e3c7e4e420d9b9c55bbb49cf6f13b6e09ec4bb7
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Correct the text of the SYS_CLOCK_TICKS_PER_SEC #error diagnostic to
reflect the actual logic of the gate.
Change-Id: I28ad324b0b246e4a8de29b64483a97577a1b6fb7
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
The config variable WDT_0_IRQ_PRI is intended to be generic across a
range of watchdog drivers, however it has no default value which means
that if CONFIG_WATCHDOG is enabled, but no driver is provided for a
specific board the the configuration will fail. For now, make
WDT_0_IRQ_PRI depend on the only driver that uses it.
Change-Id: I54708d66ac8fbc2ef657a1ef4510eb5e7a2cff28
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
The Ready To Send (RTS) hardware flow control signal in the nRF5
UART was being configured as an output with a pull-up on it.
This was seemingly causing certain issues with btattach on Linux
and it's not done anywhere else.
Change-Id: Id792d967b043ea7a796d6598500a733c092dbc2c
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The various other KSDK shim drivers follow the name pattern
<DEVICE>_KSDK, renaming the RANDOM driver to follow the pattern.
Change-Id: I89409083f94c0990129726e70a964b02e0dc2802
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
The baudrate calculation present in set_baudrate() is
causing the UART to emit inital bytes incorrectly, for a
reason currently unknown, but directly related to the fact
that __aeabi_uldivmod is being invoked.
Since the nRF5x Product Specifications do not provide a
standard formula to calculate baudrates and instead list
a predefined set of divisor values, we opt here to use the
official values and remove the attempt at calculating them
manually.
Change-Id: Ic3ff42ea6d065e9a1d26a5350ce5bf5ad661160a
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
When user wants to set all the PWM ports in one call,
pwm_qmsi_set_values() should call __set_one_port() for
each PWM port. The current pwm_qmsi_set_values() will
return after setting the first PWM port. It's illogical.
Change-Id: I5776bf636c2dc58683c629e26f72fca335e781db
Signed-off-by: Qiu Peiyang <peiyangx.qiu@intel.com>
This refactor is in preparation for making driver API structures
const.
The console driver provides a mechanism to install an input and an
output hook function. These are primarily used by the onboard
gdb-server. The output hook is entirely implemented within the
console driver.
The input hook is partially implemented in the top of the uart driver
and within the console driver. The hook function itself is installed
in the uart API structure, but is invoked only by the console driver.
Installing the hook function directly into the uart API structure
prevents the API structure being const. There are two approaches to
fixing this:
1) Implement setting of the input hook in the same way as
uart_irq_callback_set().
2) Move the input hook entirely to the console driver.
We implement the latter. This approach has two benefits, first it
removes the need for every uart driver to implement the behaviour and
second, the current placement of the callback function in the uart API
seems odd given that the callback is only invoked by the console
driver, never by a uart driver.
Change-Id: I258b312d3055df1c2bdeb896bd4f4f39c40838f7
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
The variable is defined as SYS_LOG_GROVE_LEVEL in Kconfig..
Change-Id: I0f77336df2293694ece71f4f5fccb5283f6dc58c
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The name read16() collides with other definitions within Zephyr. We
don't actually use this function here, so remove the definition. Fix
various other unnecessary name exports while we are here by adding
'static'.
Change-Id: I7eee8c527a62fea4e6e1bdae8a4874d8ce66596c
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
The read16() name collides with other definitions within zephyr. Make
it static and fix a few other unnecessary name exports while we are
here.
Change-Id: Id72d44a6b84b8d72c7ba2d0f34b29dbc1d02f2b6
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
The exact pin numbers for the nRF5 UART configuration is
board-specific, so the Kconfig default values should be in a
board-specific file.
Change-Id: Ibaacde292db191221e32b3626c68bf972dd26016
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In order to avoid type conflicts make sure that ISR_HANDLED
is defined. This makes the ISR the correct type.
Make sure that the pointer for the unused argument for ISR
is of the proper type (NULL).
Change-Id: Ia1873f32d2e2174085f929e318a780a1b2574785
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Make default value compatible with both nRF51 and nRF52.
Change-Id: I65dafbdf8518103becdd7388e9c0195ef1c4460d
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
Default IRQ priority changed to 1 to so it can also be compatible with
nRF51 (Cortex-M0 allows up to 4 priority levels but Zephyr needs the
first two for the OS).
Change-Id: Ie57a729f5d932f020a7d1d7e55cf3741f1ecfbab
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
Integrating the IRQ definitions for both nRF51 and nRF52, and defining
the set of IRQ values that are common to both.
Also switch the controller, uart and clock drivers to use the common
header definitions.
Change-Id: Id6816d7a97720896cfe4df83656fb8b1f8fb01fa
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
It's not FMSTAT<0/1> but FSMSTAT<0/1>
Change-Id: I836cf001b7baefe86df67f13a8759ea4e697a28e
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Put the clk_perih_enable() call outside of the switch statement so it
actually runs.
Jira: ZEP-1048
Change-Id: Iee8efb4430d37dc74ce48f249bbf58d53125b520
Signed-off-by: Iván Briano <ivan.briano@intel.com>
As part of an effort to closely integrate with Zephyr OS,
removed the custom implementation of clock control
interfaces used in controller code and use the driver model
in Zephyr OS.
Jira: ZEP-897
Change-id: I03efbff471e42b9bd9832818dd20dd5998a60227
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
This way the application can reuse the same callback for multiple CCC
since it can track what CCC is affect by checking the attribute pointer.
Change-Id: I608da643aea07de26b65d67e6db3268d717d0f53
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
nRF51x SoC is based on ARM Cortex-M0 and running at 16MHz clock.
Due to Radio ISR latency restriction, the CPU utilization within
BLE tIFS of 150 us should not be more than the time radio h/w
takes to get ready. In order to keep short CPU utilization
inside tIFS encryption procedure has been spread over several
connection intervals. In comparison to possible encryption setup
in 3 connection intervals, this commit introduces a encryption
setup being done in 5 connection intervals so that max. CPU time
is well within the permissible limits by nRF51 h/w and tIFS.
Change-Id: I8971d69675836b9e18bea59d95951e0dfe8a7d2d
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Move to utilizing an inline function for getting the base addr of the
external interrupt register region. This is in prep for support more
than 32 external interrupts.
Change-Id: Ifdaad67703068395a7749543ef68435435e7c9ba
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The HDC1008_I2C_ADDR config option should be available only if HDC1008
is enabled.
Change-Id: I0d1813512396faefb609527ba5df2a0c4ea159a9
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
Change e4b89571aa renamed the variable
to an undeclared one, without breaking verify but daly breaks.
A local variable of type spi_intel_data was missing on this
function.
Jira: ZEP-1095
Change-Id: Ie410933c2472378d4a6f24d6ca932ac203e3b08c
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
Mutable driver state relocated from config_info to driver_info.
This driver is unused by any board, nor can it be compiled for any
board. Hence this patch reflects the mechanical change that should be
made to the driver in order to support a const config_info, but the
patch has been neither compiled, nor tested.
Change-Id: I28597962e81d6e02f1f4befe48c3a3324691cfeb
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Mutable driver state relocated from config_info to driver_info. This
driver supports PCI enumeration. We drop code that attempts to update
irq_num based on PCI enumeration because the interrupt found by PCI
enumeration must always be the same as the statically configured IRQ
number.
Change-Id: I5580b0ba95635696a825fe66dbf16259c54d5ba8
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
PCI enumeration modifies pci_dev and base_addr at driver
initialization therefore these objects move from config_info to
driver_data in preparation for config_info becoming const.
We drop code that attempts to update irq_num based on PCI enumeration
because the interrupt found by PCI enumeration must always be the same
as the statically configured IRQ number.
Change-Id: Ibfefa851d2836d524b8151ed0108ecf9de2cd3a3
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
PCI enumeration modifies pci_dev, base_addaress at driver
initialization therefore this objects move from config_info to
driver_data in preparation for config_info becoming const..
We drop code that attempts to update irq_num based on PCI enumeration
because the interrupt found by PCI enumeration must always be the same
as the statically configured IRQ number.
Change-Id: Id5af682dac112ec6dc6e4aa14b655e0047972d38
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Mutable driver state relocated from config_info to driver_info. This
driver supports PCI enumeration. We drop code that attempts to update
irq_num based on PCI enumeration because the interrupt found by PCI
enumeration must always be the same as the statically configured IRQ
number.
Change-Id: I97198ae9603505606a872b07824d6c61688f0ced
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Pending bit gets cleared by writing 1 into it, so don't use the previous
value and just write the line bit offset instead.
Change-Id: I4c88016bf53327b2670a144d3b994945f26fc002
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>¬
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Since dd5e90ec the device_get_binding call returns NULL unless the
driver_api is set by the driver. Since the exti driver only uses an
internal struct to store the callbacks, remove the need for the device
binding call from other drivers (e.g. gpio).
Change-Id: If0b733c27754108118d87ef02640311f0535ab57
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
The field is "NF: Noise detect flag". Given that every other field name is
faithful to the manual, do the same for NF.
Change-Id: I300663e6d5016bf28071d2a1926ec73682ae3d01
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
In QMSI 1.2 API, the RTC divider value for the prescaler can now be set
on runtime. This is done through a config parameter for the qm_rtc
driver.
Fix the rtc shim driver by using the value defined in rtc.h as
RTC_DIVIDER.
Change-Id: I5ab61a5a1a3debca103f2782e0ac584938dc91e1
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Update the QMSI drop we maintain in Zephyr, and fix the build where
needed:
- QM_USB_BASE is renamed to QM_USB_0_BASE;
- parameter int_en from qm_uart cfg struct was removed;
- driver's folder now has a new structure, fix makefiles accordingly;
- QM_WDT_MODE and related renamed to QM_WDT_CR_RMOD;
- QM_SCSS_AON renamed to QM_AONC.
Change-Id: Iffe9c66b7a3f2fe64418326e20ff0894149b3044
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
The hexiwear board has a k64 SoC, so we can reuse the k64 pinmux driver
and just add a new pinmux table for the board.
Jira: ZEP-716
Change-Id: I936691b3578db298014f44fe18433d7943b431f3
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The k64 pinmux driver can be used for any k64 board, not just frdm_k64f,
therefore renaming the driver accordingly.
Change-Id: I45e96d4a5ff6aa859d0f57fe098e44a8ae5283d1
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Those options are not being used anywhere, so remove them and avoid some
confusion.
Change-Id: Ia3767dbd2432851dfae4b1e996f02ed1b2450505
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The Atmel SAM3 serial driver poll in function checked
for new characters incorrectly.
Change-Id: I9024a991404bf949226634c9f6c6ea507577cff1
Signed-off-by: Justin Watson <jwatson5@gmail.com>
In the Nordic Semiconductor's nRF5x series SoC clock control
system can source the system clocks from a range of internal or
external high and low frequency oscillators and distribute them
to modules based upon a module’s individual requirements.
In this commit the implementation adds support for 16MHz
peripheral clock, 32.768 kHz RC oscillator, and 32.768 kHz
crystal oscillator clock sources.
16MHz peripheral clock is required to use the 2.4GHz Radio
peripheral. 32.768 kHz RC or crystal oscillator clock source
is required to use the real time counter peripheral.
Jira: ZEP-896
Change-id: I1a1e22322a5a26b587f3e27bb979e6296987ac1c
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Provide a network driver wrapped around the KSDK ENET and PHY
drivers.
The driver performs one shot PHY setup. There is no support for PHY
disconnect, reconnect or configuration change. The PHY setup,
implement via KSDK contains polled code that can block the
initialization thread for a few seconds.
There is no statistics collection for either normal operation or error
behaviour.
Origin: Original
Change-Id: Ia0f2e89a61348ed949976070353e823c178fcb24
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
The bt_storage_clear() function doesn't modify the data behind the
addr parameter, so the pointer should be decared const.
Change-Id: Icce676f9df80bac26ba4877bb63752559a43339f
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
PCI enumeration modifies pci_dev and port at driver initialization,
these objects move from config_info to driver_data in preparation for
config_info becoming const.
This driver shares a unified uart configuration structure with other
uart device drivers. The structure uses 'union' and the preprocessor
to customize the structure to the drivers specific requirement. There
appears to be no compelling reason why all the uart drivers should
share the same (customized) config_info structure. In order to
re-organize the structure for this driver to get config_info const, an
ns16550 specific config structure is defined and the driver switched
over from the generic uart_config.
Change-Id: I31932d811f623a9370b69903114ae97b15d65886
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Move the RW channel_period object from the driver config structure to
the driver context. Remove the now empty driver config structure.
Change-Id: I38df7877f1bfb9bb55bcd61e7f35cebb6e4916bd
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
The callback list within the driver config is updated dynamically
hence the list itself cannot be const. Create a runtime context
driver data structure and relocate the callback list to the new
structure.
Change-Id: Ied20846e6a78e43967239afa7797456a9abd8548
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Make pointers to struct config_info const in prepration for a const
config_info.
Change-Id: I1ca9e999840a6ad81dc369b56b1da554f3c1cb49
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Make pointers to struct config_info const in prepration for a const
config_info.
Change-Id: I0257e242a2d3bc4e353a3477364a4d9a7fb72b82
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Make pointers to struct config_info const in prepration for a const
config_info.
Change-Id: I71bcfa48b31934bc683a344d40bb03f5247bbbec
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Using AON for GPIO kconfigs is very specifc to quark se, there
is no need to make this special for this platform. Use the
existing scheme instead.
Change-Id: I946431490380dc0f537d6056277a94c9c9c80fed
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
zephyr.h includes nanokernel.h which includes cpu.h, so make it
simple and just include nanokernel.h. zephyr.h should only be
included in applications.
Change-Id: I11a9ad8608d23af4f2a40a97eb71c09516c3399b
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Make pointers to struct config_info const in prepration for a const
config_info.
Change-Id: I2256c0f0bff5100e756709c9f99887af70bac661
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Make pointers to struct config_info const in prepration for a const
config_info.
Change-Id: I977979bc86830768101ab9a2ca1928823ae994df
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
The drivers config structure initializer sets sys_clk_freq statically.
The runtime repeated setup of sys_clk_freq is superfluous, and
inconsitent with const driver config structures.
Change-Id: I115e2b70b193b567de83132f3984e48b2dded0a2
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Make pointers to struct config_info const in prepration for a const
config_info.
Change-Id: I8ecc10b50e23d2dbe987e3318bac09e235b1e1da
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@gmail.com>
Make pointers to struct config_info const in prepration for a const
config_info.
Change-Id: Ia2203f134c8d11f52a91e6245e7bdbb26f5a9e92
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@gmail.com>
Make pointers to struct config_info const in prepration for a const
config_info.
Change-Id: I28789a7f1f26e4a0d499f5a89a567ae8c61eae51
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@gmail.com>
Change the Kconfig parameter type for the I2C slave address from
string to hex. The code that consumes this configuration parameter
expects an integer and fails to compile when presented with a string.
Change-Id: I493002ea6f1266344cac863ac305e59e93a5b1fe
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Don't use the previous reg value when setting up just one specific pin,
as it can have a side effect on other gpio pins.
Change-Id: I60e69950a72446a6fa7087b13dbcecf6ae4b15e4
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
Set the value for the I2C address directly and use only
one per sensor.
Change-Id: I24d06a964e8e372eddf262b70fe5d9854a04563c
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Make sure we are connected to the right device.
Change-Id: I09e696563191392d23a316ad065bb7e320df76bb
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
NRF_GPIO_BASE can be used by both the nrf51 and nrf52 families, as it
gets defined by the nrf5x.h header files.
Change-Id: I8e6b265d9ce94551389ca170f105a53c88d58c68
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
Sensors are end-devices and usually nothing depends on them,
so set a global priority for all sensors and use it instead of
individual values per sensor.
Change-Id: I5847411e783ef8a8517f0ab1d8234810513707b4
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Generalize the LOG_ETHERNET_LEVEL configuration parameter for use with
multiple ethernet drivers.
Change-Id: I26bc2189c8cf79db19f59e8082caec03b0d9c7b8
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
i2c_quark_se_ss driver is deprecated and replaced
by i2c_qmsi_ss. So remove i2c_quark_se_ss definition.
Change-Id: Idcc6a7f01ffae626ae7d5f9966eac67be78599af
Signed-off-by: Qiu Peiyang <peiyangx.qiu@intel.com>
The new device control API added a 'device_power_state' variable to the
driver's data structure to keep track of the current power state set
for a device. This member variable is conditionally built into the
runtime data structure of each driver, but in some cases the whole data
structure is conditional on its respective API_REENTRANCY config
variable.
In those cases where the runtime data was previously used only for
reentrancy protection, the runtime data pointer used for device
initialization is NULL, and when power management is enabled, this
invalid pointer ends up dereferenced to get the device_power_state
member.
Make the declaration of the runtime data dependent on any of its
conditional members, and NULL only when all of those settings are
disabled.
Change-Id: I4f41e00ad8551a096db639e31d33f43752b6672f
Signed-off-by: Iván Briano <ivan.briano@intel.com>
Add typecasting in dma QMSI shim to avoid compilation error.
The DMA API and QMSI have their own definitions for the
dma configuration parameters, such as handshake_interface,
handshake_polarity, source/destination_transfer_width,
channel_direction, and source/destination_burst_length.
When a API is called, the shim driver will assign values
for the above-mentioned parameters to the configuration
variable(based on QMSI's definiton) from the values in the
variable provided by the caller based on API's definition.
Even though all these parameters have similiar definition
and values in both the generic API and QMSI, QMSI uses
its own names which are different from those definied in
the generic API. Without typecasting, the parameter value
assignment will cause compilation error(even though error
only happens for some compiler).
Jira: ZEP-1031
Change-Id: I147c690799514bd611cd9f88316f44346e095359
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
As part of an effort to closely integrate with Zephyr OS,
removed the custom implementation of IRQ interfaces used
in controller code.
Jira: ZEP-841
Change-id: Ie427f45aeecad51053112371526cb7dc4817248f
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Code under SCHED_ADVANCED macro in ctrl.c is used to
disable advanced radio time space scheduling calculations
used for placing non-overlapping observer and master roles;
to populate connection parameter request/response PDU
fields, and autonomous generation of slave initiated
connection parameter requests.
This macro shall always be enabled for optimal and correct
operation of the controller, It shall only be disabled to
debug failures in other part of the controller, to rule out
this code's influence, if any, on the failure being
debugged.
Change-id: I04e5f837ef0a5658361bd3668f583f1e13504570
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Place __packed at the end of the structure definition in line
with the rest of the Zephyr codebase.
Jira: ZEP-732
Change-Id: I25aa731cbd188a6e23ca2035eb22fa919295bb25
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Leftover from previous commits, this macro is not used anymore in
the HCI implementation.
Change-Id: I376c92a6b68432d2ff818ea25e68f087131e8479
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Use the net_buf structure directly when populating incoming
ACL data or asynchronous events. This ensures that no additional
memcpy() operations are required and removes completely the
statically allocated buffers in hci.c.
Jira: ZEP-726
Change-Id: I6ac8bd0becb7037ce8ecfac109f44832d23fcfd2
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Preallocate a response event net_buf buffer before processing an
incoming command and provide it to hci.c so that it populates
the event directly, instead of using a temporary buffer than
must then be copied into the return net_buf.
This applies exclusively to Command Complete and Command
Status, since those are the only events that are sent in
direct respone to an incoming command.
Jira: ZEP-726
Change-Id: Ia3ea71ac497690af929c44308760f68491ea829e
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Instead of copying the net_buf contents into a temporary
buffer byte-by-byte, the Controller HCI code now handles
incoming commands and ACL packets from the Host directly
in the net_buf containers, to avoid unnecessary memory
copying and to align with the rest of the Bluetooth stack.
Jira: ZEP-726
Change-Id: I9802607d84ee6206218b711e7e6e23dafb70581a
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
As part of the effort to consolidate the BLE Controller's
HCI layer, the functions in hci_driver.c now use the "hci_driver_"
prefix when it is sensible to do so, and prefixes have been
removed altogether when they are not required.
Jira: ZEP-726
Change-Id: Icd3e56e0170f15636245ea12a389a5a9e86c166c
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add PTB22, PTE26, and PTB21 to the frdm_k64f pinmux table, and helper
macros to board.h to map them to red, green, and blue LEDs respectively.
Change-Id: I257621467e71dfd9bdc5d97d6da444dfb5c58b2b
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Add PTC6 and PTA4 to the frdm_k64f pinmux table, and helper macros in
board.h to map them to SW2 and SW3 respectively.
Change-Id: Ia30df9015d6d3c09131b4fbb2f2009ee745f7268
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Statically compute the number of elements in the pinmux table rather
than keep a manual entry in step with the table.
Change-Id: I99634aa460a39bb8a9a10fe37d28aaae792aa641
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
MVIC does not have _REG_TIMER_CFG defined because it does
not have a timer config register. Add checks for MVIC at
places where it is used.
Jira: ZEP-1015
Change-Id: I59f5c43cc2d1b17cf9e88b940631c2542e9729ab
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Interrupt stubs now just push the ISR and parameter onto the stack
and jump to the common interrupt code, never to return.
Change-Id: I82543d8148b5c7dfe116c43f41791f852614bb28
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
In some cases we can either assume they are already masked
at boot and save some cycles, or the IOAPIC has configuration
from a prior boot stage that needs to be preserved.
Change-Id: I0c71ff0f01a6ee13a3b9c9e239d5a933d6cb6542
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This reverts commit 581e15ced2.
The commit was marked RFC and should not have been merged yet.
Change-Id: Iafd3587f8840e64670c32fa5726ea20ac9c9962a
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Provide a network driver wrapped around the KSDK ENET and PHY
drivers.
This driver is functional, just. It is not in a fit state to be merged to master yet.
Origin: Original
Change-Id: Id29e756f33c6c0263926139188c49f9a9c3d5e09
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Updated CONFIG_SOC_QUARK_SE_SS to CONFIG_SOC_QUARK_SE_C1000_SS
Change-Id: I7dc02d91a4d739f6cd3f84001d1dd29759317163
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
No need to create new Kconfig that do exactly the same, just
reuse those from the main QMSI driver.
Change-Id: I965055f36845ac0464e4a383b0d05c3ae35c0015
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Update the power sample and drivers with the new device driver power
management API using the existing logic
Jira: ZEP-954
Change-Id: Idd94232e458767635973e94e9fc673c01612c1e2
Signed-off-by: Amir Kaplan <amir.kaplan@intel.com>
Removed CONFIG_INT_LATENCY_BENCHMARK dead code.
CONFIG_INT_LATENCY_BENCHMARK depends on ARCH="x86", it will never
be true for ARM code.
Change-Id: Ia5779a69b1bf670ebb140c2923c9fe0af6b781d4
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
Removed unused workaround in loapic. There are no references
of usage.
Change-Id: I8700b4b7ce8efef5e7b95e6cdd2b201eae3f1f37
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
During USB device reset, the controller must have its device address
cleared (set to 0). This is not really taken into account by most host
side stacks, which is the reason why this bug didn't show up before.
It was found when we were trying to run the USB20CV [1] compliance test
suite on Windows.
Without this fix the device doesn't show up on the targets list, which
means device enumeration failed. With this patch in place the bug is
fixed and the device gets listed.
Tested with the CDC ACM sample application.
Jira: ZEP-950
[1] http://www.usb.org/developers/tools/usb20_tools/
Change-Id: I0b78f7ce043fa29dde0fb7f3b3aecee9844f4d11
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
The driver originally gets the full-duplex configuration
from the PHCON1 register and PDPXMD bit as stated by the
ENC298J60 specification document section 2.6 "LED Configuration".
This section trust the board to LEDB connection to signal the
full-duplex configuration.
This commit gets the full-duplex configuration from Kconfig
symbols to allow a proper functionality even when the board
is not connecting LEDB apropriately.
Change-Id: I803958409a611e23e2c3e03f40b412f1695947af
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
There is a tx semaphore that controls a single access to the
transmission service. The device is capable to manage a single
transmission call at a time. Multiple requests need to wait
for the resource to be free.
This commit adds the initial release to the tx semaphore.
Jira: ZEP-895
Change-Id: Ic9879cfd15bb1494644b2cf0f4565f7e6a2c1c22
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
ENCC28J60 specs section 6.5 "MAC Initialization settings"
state that MACON3(7:5) register configure automatic padding and CRC.
It also states that the configuration 111 and 011 both configure as
all short frames to be zero padded with a valid CRC appended.
Nevertheless, experimentally, there are ocassions when configuring as 111
frames does not have a CRC appended. This frames could be rejected
by the receiver if it is configured to do so.
This commit changes configuration from 111 to 011, which is not
presenting that behavior.
Jira: ZEP-842
Change-Id: I302bb99f7a1f23b298fe0db0245963b640644040
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
As part of the effort to consolidate the BLE Controller's
HCI layer, the following files have been renamed:
* hci.h -> hci_internal.h: contains the HCI API to be used
by the driver
* main.c -> hci_driver.c: Implement bt_driver and includes
initialization and glue code
Jira: ZEP-726
Change-Id: Ica8b3e114da42a766a1b14ce59558cacd899a1a7
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Use the sys_ macros from byteorder.h to access all HCI
structure members that are endianness-dependent.
Jira: ZEP-726
Change-Id: I950f8eaca7048bf7972c2c4c347cfd5bbba17eb6
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Bug was introduced by a6cf6038e3
Change-Id: I91ceab2ca20c4d2f70a953b56d895152a471125a
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Provide a random driver wrapped around the KSDK RNGA driver.
Origin: Original
Change-Id: I43feeb37d8d5173c7b95af8e80434fb7dc77a83e
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
In 1.0 you could set only one callback on the whole gpio controller. It
was impossible for another sub-system to add another callback, without
overwritting an existing one.
Such API has been obsolete for a long time and no one is using it
anymore. Thus removing it entirely.
Change-Id: I6a17fd99373dc6cef1fa2ebb421e992412d5015e
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The LE_RAND HCI command was not filling in the rand array
with 8 random numbers as required by the spec.
Please note that the while() loop inside the command's
implementation can take up to hundreds of ms to execute.
Jira: ZEP-726
Change-Id: If27ff861ee5fa7842cd469e99d5bfa8ac47ac2fa
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Clean up, document and remove the macros used in hci.c
to access the different parameters and calculate lengths
of events and data structures.
Jira: ZEP-726
Change-Id: I476aa9e061dfe429b5181265167bffa203ed151b
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Switch to using the definitions in include/bluetooth/hci.h
for ACL data handling, both in RX and TX.
Jira: ZEP-726
Change-Id: I6b5f6de4ff568c4e73432df3edfa7d0a57f22fff
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Delete all event definitions from hci.c since the code now
uses the ones in include/bluetooth/hci.h exclusively.
This is the fourth and last commit in a series that transitions
from the event structures in hci.c to the ones in hci.h.
Jira: ZEP-726
Change-Id: I625c2aecf759823a1cc73a3ea096564284fe8c52
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Use Zephyr's include/bluetooth/hci.h for the HCI event
Number of Completed Packets.
This is the third commit in a series that transitions from
the event structures in hci.c to the ones in hci.h.
Jira: ZEP-726
Change-Id: I179bceb2f9dc07d7a1a524c3a80f0886f712ec2b
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Use Zephyr's include/bluetooth/hci.h for HCI event
handling in data-related events.
This is the second commit in a series that transitions from
the event structures in hci.c to the ones in hci.h.
Jira: ZEP-726
Change-Id: I0e9e6f709091859af47d90b26f5e7baa830a2838
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Use Zephyr's include/bluetooth/hci.h for HCI event
handling in control events.
This is the first commit in a series that transitions from
the event structures in hci.c to the ones in hci.h.
Jira: ZEP-726
Change-Id: I6f131675add18e2ae061f0fb2cf220ea7057f852
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This changes the way that aysnchronous events are handled
in the BLE controller's HCI layer. It performs all common
operations in a single place to avoid code repetition of the
same memory accesses over and over.
Jira: ZEP-726
Change-Id: Id9e8395944e8800f32dd9749da2b4f5c901c8682
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Continue using Zephyr's include/bluetooth/hci.h for HCI command
handling in more of the commands.
This commit deletes all command and command complete and
command status event definitions and structures present in
hci.c.
This is the sixth commit in a series that transitions from
the structures in hci.c to the ones in hci.h.
Jira: ZEP-726
Change-Id: I34635a1f55f3aef124fd5ff005c99cedb40b8a49
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Continue using Zephyr's include/bluetooth/hci.h for HCI command
handling in more of the commands.
This commit cleans up hci_cmd_handle() to use the new macros
added in previous commits.
This is the fifth commit in a series that transitions from
the structures in hci.c to the ones in hci.h.
Jira: ZEP-726
Change-Id: I152e02ed15042d367e95432bdd07ae5c74935be8
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Continue using Zephyr's include/bluetooth/hci.h for HCI command
handling in more of the commands.
This commit removes Nordic Semiconductor Vendor-Specific
commands, since they are currently unused and
manufacturer-specific.
This is the fourth commit in a series that transitions from
the structures in hci.c to the ones in hci.h.
Jira: ZEP-726
Change-Id: If0141072489777bfecc06e4aaa5f569898a5c449
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Continue using Zephyr's include/bluetooth/hci.h for HCI command
handling in more of the commands.
This commit ports the LE controller commands to hci.h.
This is the third commit in a series that transitions from
the structures in hci.c to the ones in hci.h.
Jira: ZEP-726
Change-Id: I3f11cca1da4aa6a20cce9706362818f8f6c87b0a
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
As part of closer integration into Zephyr, remove the use
of custom assert mechanism and use BT_ASSERT instead.
Jira: ZEP-761
Change-id: I27f37d697b0a84bc001754a8d0b4dbb6ddb54298
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Continue using Zephyr's include/bluetooth/hci.h for HCI command
handling in more of the commands, including the informational ones.
This is the second commit in a series that transitions from
the structures in hci.c to the ones in hci.h.
Jira: ZEP-726
Change-Id: Iecbc7ae5ba2c8435a51d62d59e8095aa25e6dc0e
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
They must provide the k_cycles_get_32() API and must not refer to
command packets: the latter do not exist on unified kernels.
Change-Id: Ia354dc060e5ad2595850f97da82d8feb590d16b7
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This is a better choice of default; on Mint Valley using IRQ 0
for the timer collides with the DMA Error IRQ line.
Issue: ZEP-849
Change-Id: I14cb60fbe548488198813b2351e0ed1f07c2d07d
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Changed help message to be in compliance with the rest of sensors.
Change-Id: Ia18f7623eda5f86fe6f7d99ac934f1a9beda55a8
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
This patch implements suspend/resume routines which
preserve SPI master 0 and 1 context in SYS_PM_DEEP_SLEEP.
The following parameters are suspended/resumed:
- All non-sticky RW registers for the SPI device which
are not related to a transfer.
- The SPI MASK registers (interrupt routing register).
The suspend/resume functionality is implemented in
the QMSI shim layer as a fast and temporary solution,
it will be removed and migrated to QMSI later.
Change-Id: Ib60317ca41013a3e794820e9c3ef34f35d108209
Signed-off-by: Dragan Cvetic <dragan.cvetic@intel.com>
Signed-off-by: Julien Delayen <julien.delayen@intel.com>
CONFIG_PINMUX_DEV_QUARK_MCU is deprecated and QUARK MCU support
is replaced by CONFIG_PINMUX_DEV_QMSI. So delete this deprecated
CONFIG option.
Change-Id: I2cad6cfd4344386a00d45a579e8cc586935b041f
Signed-off-by: Qiu Peiyang <peiyangx.qiu@intel.com>
CONFIG_PINMUX_DEV_NAME should depends on CONFIG_PINMUX_DEV, not
CONFIG_PINMUX. In current situation, user will be able to access
pinmux dev driver without enabling CONFIG_PINMUX_DEV. This isn't
excepted to happen.
Change-Id: I75bcfff5a51e1dc93e002c0c6a65876f93cde5b8
Signed-off-by: Qiu Peiyang <peiyangx.qiu@intel.com>
In order to restore aonpt context after entering
SYS_PM_DEEP_SLEEP, suspend and resume functions
are called.
Only the interrupt mask is restored as it is reset by
the QMSI ROM and other registers are sticky.
The suspend/resume functionality is implemented in
the QMSI shim layer as a fast and temporary solution,
it will be removed and migrated to QMSI later.
Change-Id: I0dcd4552cd8c60ecb4eb650fc3ad85566b726a38
Signed-off-by: Julien Delayen <julien.delayen@intel.com>
In order to restore i2c context after entering
SYS_PM_DEEP_SLEEP, suspend and resume functions
are called.
The following parameters are restored:
- All registers for the I2C device.
- I2C clocks.
I2C depends on the DMA which is enabled separately.
The suspend/resume functionality is implemented in
the QMSI shim layer as a fast and temporary solution,
it will be removed and migrated to QMSI later.
Change-Id: I22ca2fb9884109f7b5ca75af572811187a531403
Signed-off-by: Julien Delayen <julien.delayen@intel.com>
In order to restore watchdog context after entering
SYS_PM_DEEP_SLEEP, suspend and resume functions
are called.
The following parameters are restored:
- All registers for the WDT device.
- Watchdog interrupt mask.
The suspend/resume functionality is implemented in
the QMSI shim layer as a fast and temporary solution,
it will be removed and migrated to QMSI later.
Change-Id: I6e4e30a797b0ca38ce727d50fa51d1b2f8330405
Signed-off-by: Julien Delayen <julien.delayen@intel.com>
DEFINE_DEVICE_PM macro was not defining device_pm_ops
as 'static'. Fixes the issue and impacted areas.
Jira: ZEP-639
Change-Id: I5e1de6af97bf7b2b690af0c81034ce167e655e43
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Fix a compilation warning. Compilation of the i2c driver
requires QMSI dma object file. As a solution, the current
code has "selects DMA_QMSI" in i2c Kconfig. This results
in a compilation warning since "select DMA" is also
required. Adding "select DMA" and "select DMA_QMSI"
together in i2c Kconfig can solve the compilation issue.
But, this will cause the dma driver be unnecessarily
enabled. So, the solution is to fix the issue in the QMSI
part instead of in the shim driver.
Jira: ZEP-777 ZEP-778
Change-Id: Id4c1f749bf71eece1e70583bd586a69b596768b2
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
The Sensor Subsystem has different IRQ numbers for the same device
across CPUs. QMSI declares these, but doesn't do anything to try to
map it automatically, so we have to do it in the driver.
Similarly the SCSS interrupt routing (the SoC-wide "APIC", which is
distinct from the per-CPU interrupt masking hardware) needs to know
which CPU we're trying to unmask an interrupt for.
Change-Id: I27e5ec44f324f869e16a92e7ef40a22a305d98a2
Jira: ZEP-546
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Overwhelming industry practice when using two-byte line termination is
to end the line with "\r\n" and not "\n\r".
Also remove needless casts. GCC does not warn on int-to-char
conversions.
Change-Id: If01a2e5ca327aacebcbcaf384af9c7131119689b
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
You can't query the LOAPIC for every kind of interrupt that fires,
it has no idea about IRQs that were generated by an 'int' instruction
for example. Extend the semantics of _irq_controller_isr_vector_get()
to return -1 if the vector can't be identified.
Issue: ZEP-602
Change-Id: I1174aa62fbedffdcd329d60da8ef14fabb042dc3
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Change the signal ramp up/down config parameters in i2c driver
module to SoC specific.
Jira: ZEP-753
Change-Id: Ie01f1d890a7133d30ea53eee07f60354734a8571
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Add a shim layer around the ksdk I2C driver to adapt it to the Zephyr
I2C interface. Currently only supports master mode.
Jira: ZEP-717
Change-Id: I704b8c38e22e456bb9fa4325682b2a354a27a7ba
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Paranoid with older compare set logic, the changes in this
commit is better in avoiding compares being set to stale
count values (values in past). Compares shall always be set
in future w.r.t to current count value in the counter h/w.
No longer using fp_worker_sched() to explicitly run the
worker because there may be no ticks elapsed when worker
runs, which leads to ticker job running thereafter not to
update the compare to a new value, probably leading to a
stalled controller roles.
Change-id: If07f648357585ebb80c35d1320210eac3137781c
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Start using Zephyr's include/bluetooth/hci.h for HCI command
handling.
This is the first commit in a series that transitions from
the structures in hci.c to the ones in hci.h.
Jira: ZEP-726
Change-Id: I1d79586b85d25c8ef707b8a2b19a27a77b08b819
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Place common code in hci_evt_handle() so as to avoid code
duplication in the handling of command complete and
command status events.
Jira: ZEP-726
Change-Id: I35ffcb63518b52a2b209f83ef6b8bbb1d1b4a849
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Handle all instances of an unknown OCF in a common place
instead of it being spread in multiple functions.
Jira: ZEP-726
Change-Id: Ibd9ebe429754980b243cb8772702cfeb59b0a18b
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Controller implementation supports all Bluetooth Spec. v4.2 LE
states. Include the LE Read Supported States Command in Read
Local Supported Commands HCI command complete returned by the
Controller.
Change-id: I399f7c0326b058577e97e6d8a2676afbeb73b6fe
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Use stack_analyse in the recv fiber to print actual stack
usage, use this as default in Kconfig option, and declare a
rx fiber stack of Kconfig supplied stack size.
Change-id: Id97ad2de4f7be3069f93271d60544f760abbf575
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
GCC requires __builtin_offsetof() to be used whenever
sizing arrays with its help. Now that stddef.h
includes conditional compilation, use the macro instead
of hardcoding the GCC usage.
Jira: ZEP-732
Change-Id: Ieb5c694e1dc8323bd1fa2d18711a893f8824c5b1
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Rename nrf51_enable() to nrf51_wakeup()
and nrf51_disable() to nrf51_allow_sleep().
Change-Id: Ie8e8fa2dde281f212e231e0c4b751d3e0021b6b6
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Controller's fiber is expected to read all enqueued events
and data, hence wait on semaphore only after all events and
data are read.
Change-id: I0150f042b0ba91efa712b38903752b20198e5e6e
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
For power consumption matter, UART between quark and BLE chip shall
be disabled in absence of messages. GPIO NBLE_BTWAKE_PIN is used
from Quark to notify BLE chip payload is coming and so enabling UART.
The UART will be disabled by deasserted NBLE_BTWAKE_PIN signal, once
a message has been transmitted.
Change-Id: If538909784363f415f4266f62be57d8d9ff48b09
Signed-off-by: Jonathan Gelie <jonathanx.gelie@intel.com>
Using the shell application, starting advertisement while
the scanner is already running caused the controller to
assert.
The work which is supposed to set the radio active state to
active is not executed before the radio ISR resets the radio
active state, causing the assert. This can happen when a
newly started role is initialized to setup the radio trx and
the radio start code then detects that its hard realtime
instant has passed (as time was spent setting up the ticker
and ticker then firing thereafter) and hence cancels radio
trx.
Optionally (without this commit), dynamic calculation of
preparation time can be disabled by setting a constant time
in the define RADIO_TICKER_PREEMPT_PART_US in ctrl.c to
avoid the assert.
Change-id: Ib4415ec4b1bfdcc89aa0f3912e5a8fdd2e817fde
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Remove use of (void) before unused functions return values.
Replace use of (void) with ARG_UNUSED for unused parameters.
Change-id: I9ffea666f10dbdc01710df723e0df253a1cdd6e6
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Initial sweep of controller code to fix the coding style.
Change-Id: Ib71c5a4657a1f162273f2dcd485fe70fff934928
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This adds queueing support for requests that requires a response making
it simpler to use the API. The storage is keep in the parameters of the
request so it is up to the application to define how many can be queued
but in case the application don't want a request to block waiting for
a buffer it can use BLUETOOTH_ATT_REQ_COUNT to control the available
buffers which is recommended in case the requests will be sent from the
RX fiber.
Change-Id: I407c3982a7ecdc4a9eff7172d9d0addd46949783
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The main.c source file in drivers/bluetooth/controller acts as
the necessary glue between the Link Layer and Zephyr's
Bluetooth subsystem. It instantiates the required RX fiber and
marshalls the control and data traffic between the BLE radio
and the BLE stack.
Jira: ZEP-702
Origin: Original
Change-Id: Ia62baedcd6e3ea83bd16306779357930f9a6c5f7
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The ll/ folder contains a full implementation of a BLE Link Layer
interfacing with a baseband and a radio through radio.h. The
current code implements most Bluetooth 4.2 features and is
currently functional and tested with nRF5x ICs from Nordic
Semiconductor.
Jira: ZEP-702
Origin: Original
Change-Id: Ib79cd97142d1a72c99dcf2a88116ac97ddd90a2b
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
For the Link Layer to be able to communicate with the rest of
the BLE stack in Zephyr, this barebones HCI controller
implementation includes an initial version of the fundamental
commands and events required.
Jira: ZEP-702
Origin: Original
Change-Id: I38bc9dae34e7075ab8b8178fd6b6659e2dec53b0
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The util folder contains memory management, queue management
and misc utilities used by the Link Layer implementation.
This will be in time replaced by Zephyr's native functionality.
Jira: ZEP-702
Origin: Original
Change-Id: Id8602ea41ec44811801dfc582bab244c339eabe3
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The drivers/bluetooth/controller path adds a native BLE Link
Layer (controller and HCI) to the Bluetooth subsystem. This first
implementation adds support for the nRF5x series of devices
from Nordic Semiconductor. The hal/ folder inside the controller
contains all IC-specific code to interface with the radio and
baseband.
Jira: ZEP-702
Origin: Original
Change-Id: I4ed61d5f67af6b4735d746a38a5b55f054521075
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
HCI RAW channel API is intended to expose HCI interface to the remote
entity. The local Bluetooth controller gets owned by the remote entity
and host Bluetooth stack is not used. RAW API provides direct access
to packets which are sent and received by Bluetooth HCI drivers.
Change-Id: I4ba2b7ca2c2b0d6c5de6ef1f231d1c5b82125e09
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The W25QXXDV_PAGE_SIZE is not a valid erase size supported by
the flash component (section 7.2.23 - 7.2.26 of datasheet
https://www.winbond.com/resource-files/w25q16dv_revi_nov1714_web.pdf)
and it is not used by any code so remove it.
Jira: ZEP-615
Change-Id: I4315fa082d5cbceda65ae8567e0a77e2d4066ef1
Signed-off-by: Kuo-Lang Tseng <kuo-lang.tseng@intel.com>
Originally, x86 just supported APIC. Then later support
for the Mint Valley Interrupt Controller was added. This
controller is mostly similar to the APIC with some differences,
but was integrated in a somewhat hacked-up fashion.
Now we define irq_controller.h, which is a layer of abstraction
between the core arch code and the interrupt controller
implementation.
Contents of the API:
- Controllers with a fixed irq-to-vector mapping define
_IRQ_CONTROLLER_VECTOR_MAPPING(irq) to obtain a compile-time
map between the two.
- _irq_controller_program() notifies the interrupt controller
what vector will be used for a particular IRQ along with triggering
flags
- _irq_controller_isr_vector_get() reports the vector number of
the IRQ currently being serviced
- In assembly language domain, _irq_controller_eoi implements
EOI handling.
- Since triggering options can vary, some common defines for
triggering IRQ_TRIGGER_EDGE, IRQ_TRIGGER_LEVEL, IRQ_POLARITY_HIGH,
IRQ_POLARITY_LOW introduced.
Specific changes made:
- New Kconfig X86_FIXED_IRQ_MAPPING for those interrupt controllers
that have a fixed relationship between IRQ lines and IDT vectors.
- MVIC driver rewritten per the HAS instead of the tortuous methods
used to get it to behave like LOAPIC. We are no longer writing values
to reserved registers. Additional assertions added.
- Some cleanup in the loapic_timer driver to make the MVIC differences
clearer.
- Unused APIs removed, or folded into calling code when used just once.
- MVIC doesn't bother to write a -1 to the intList priority field since
it gets ignored anyway
Issue: ZEP-48
Change-Id: I071a477ea68c36e00c3d0653ce74b3583454154d
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
According to commit 2055b06e ("quark: move pinmux files to board"),
drivers/pinmux/quark_mcu/ was deleted, so remove it from the Makefile.
According to commit 0ae2e895 ("remove custom pinmux for quark and use qmsi"),
pinmux_dev_quark_mcu.c is no longer compiled into image, so delete
this unused file.
Change-Id: Ied63cd3b06e8225205c5f1b3e5a675c387acb5ad
Signed-off-by: Qiu Peiyang <peiyangx.qiu@intel.com>
Also, SPI 0 isn't specific to Intel, make it a generic message. This patch
only fixes the cosmetics w/o changing undering Kconfig option names.
Change-Id: Ia58f9537c594004a1b5fb8b4af21d7e8b729efb7
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Fix i2c failure seen on fast plus mode. With higher data
rate, signal ramp time becomes longer. The ramp time
required by the controller needs to be loosened.
Jira: ZEP-711
Change-Id: Icffa334ec3f059564e333d3b0759a11d1bebc5e4
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Defined in all SoCs, but never referenced anywhere. That definition has
been replaced by CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC.
Change-Id: I1801f72a03925717ded6fbfdef22b1993f843461
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Correct the argument definition inconsistency for the set
value API. To be consistent with other pwm sub drivers, the
on and off arguments for the set value api are re-defined.
On: how far (number of timer count) from the beginning of a PWM
cycle the PWM pin will be asserted.
Off:how far (number of timer count) from the beginning of a PWM
cycle the PWM pin will be de-asserted.
Jira: ZEP-642
Change-Id: I7b39f98f1935fc3499fb36dd813abed62b86c1e7
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
This will lead to conflicts and warning coming from Kconfig, so just
whitelist the board in the samples where this hardware is supported
Jira: ZEP-739
Change-Id: I4a2f3bdcfdb44fc75df0e272c237789ee16e0de1
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Kconfig allows selecting NETWORKING_WITH_15_4_TI_CC2520 even if the
current board doesn't support it, and also selects it by default. This
breaks building the 15.4 sample with qemu_x86. Add a config option for
having CC2520 support and enable the choise only if it is available.
In addition, remove unused function from iee802154 code, as it now
fails the tests.
Jira: ZEP-697
Change-Id: Ib082f82acdd0f86d3306bbd3bb827f61b0fd0be1
Signed-off-by: Jaakko Hannikainen <jaakko.hannikainen@intel.com>
Completing the terminology change started with change 4008
by updating the Kconfig files processed to produce the
online documentation, plus header files processed by
doxygen. References to 'platform' are change to 'board'
Change-Id: Id0ed3dc1439a0ea0a4bd19d4904889cf79bec33e
Jira: ZEP-534
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
A previous re-work of IRQ priorities was led astray by an incorrect
comment. Priority level 1 is not a non-maskable interrupt priority.
In addition, zero latency IRQs are not implemented on ARC.
Timer driver now doesn't specify IRQ_ZERO_LATENCY (as that wouldn't be
correct) and its IRQ priority is now tunable in Kconfig. The default is 0.
IPM driver on both ARC and x86 side were being configured with hard-coded
priority of 2, which wasn't valid for ARC and caused an assertion failure.
The priority level is now tunable with Kconfig and defaults to 1 for ARC.
Issue: ZEP-693
Change-Id: If76dbfee214be7630d787be0bce4549a1ecbcb5b
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Per spec document, RXEN bit corresponds to bit 2
of the ECON1 register instead of bit 1.
Change-Id: I1bbfd048be248575a558679985ba9daadc43df0e
Signed-off-by: Juan Manuel Cruz Alcaraz <juan.m.cruz.alcaraz@intel.com>
The rx fiber call contiki IP stack functions to register
received frames. This interaction requires more stack memory
in the rx fiber stack to avoid memory corruption.
Change-Id: I106339e7dd1ca9282426adfb54590e34297755b3
Signed-off-by: Juan Manuel Cruz Alcaraz <juan.m.cruz.alcaraz@intel.com>
SPI bus is a shared resource between tx and rx processes.
The access to it must be synchronized to allow a rx process to
happen even when a tx process is taking place.
ECON1 register must be saved by the rx process and recovered
at the end to ensure that the tx process will continue operating
in the same register bank.
Change-Id: Ie9358bf02bef8ddb5bdf76c8847e998a627e5395
Signed-off-by: Juan Manuel Cruz Alcaraz <juan.m.cruz.alcaraz@intel.com>
Transmision status is polled. Remove rx interruption enabling and
clearance.
Change-Id: I2893f89533adef5f77c711a36b5c1bbe21c48a23
Signed-off-by: Juan Manuel Cruz Alcaraz <juan.m.cruz.alcaraz@intel.com>
Even values in ERXRDPT register may corrupt the receive buffer.
Set ERXRDPT value one address behind the next value.
If it is zero, set the value to the reception buffer end address.
Change-Id: I7150e5190c5bfb7bfafbff598eea1c26959643d0
Signed-off-by: Juan Manuel Cruz Alcaraz <juan.m.cruz.alcaraz@intel.com>
These console messages are for debugging and if sent too
rapidly, could be discarded. This was causing false positives on
test cases which rely on console output to determine success or
failure.
Issue: ZEP-704
Change-Id: I5a86c761311cde90f295cd2e65f2e70608f875fa
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The Receive Packet Pending Interrupt Flag (EIR.PKTIF) does not
reliably/accurately report the status of pending packets.
Reception fails intermittently. The EPKTCNT register is used instead.
Change-Id: I599c3b4df1b74d769dd7104e5c6e253d9cf63bd4
Signed-off-by: Juan Manuel Cruz Alcaraz <juan.m.cruz.alcaraz@intel.com>
The (currently) unused ipm_device field wasn't initialized.
Issue: ZEP-704
Change-Id: Icbeb50031c52d2513a1417f83a844e25b43429a7
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Fix i2c failure while multiple slaves are connected to the
same i2c interface. Higher load on the i2c bus makes i2c
signal less nice. The requirement for signal ramp up and
ramp down time needs to be loosened.
Jira: ZEP-646
Change-Id: If698d7ba741788857694f166ecc602c2a94cb12e
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
The data sample registers are ordered as X, Z, Y (not X, Y, Z), so the
driver also needs to extract the sample components in this order.
Jira: ZEP-679
Change-Id: I317994bb545539b049e2ebf3d2af94e63c7d2511
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
Correct an error in ADC Kconfig. The # in the beginning of
the code lines unintentionally commented out the "if" condition.
Jira: ZEP-645
Change-Id: Ieee1bdbf4865fc39aef9a0986036fd81a75e5b58
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Signed-off-by: Qiu Peiyang <peiyangx.qiu@intel.com>
Adds the ENC28J60 Ethernet module driver.
Origin: Original
JIRA: ZEP-291
Change-Id: I2b5790ecb251f9059f172bcaafadef24bd27207a
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
Fix several issues which are causing the BMI160 app hang.
For SPI duplex transfer, QMSI only supports equal length.
For SPI freq, divider is used. Actual freq is no longer used.
Jira: ZEP-461
Change-Id: I1a1bcc12c6514c3797686dfdad1ce1b852f7dc78
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
One remaining reference to uart_qmsi_pm_save_config
was missed by patch bc60506d3e.
This reference is removed.
This fixes the following error:
...
drivers/built-in.o: In function `uart_qmsi_line_ctrl_set':
/drivers/serial/uart_qmsi.c:439:
undefined reference to `uart_qmsi_pm_save_config'
collect2: error: ld returned 1 exit status
...
Change-Id: I1ceda0e152db5a1c7f70d67c04b931416687031a
Signed-off-by: Julien Delayen <julien.delayen@intel.com>
Implement saving and restoring context of the PWM controller when the
application goes to SYS_PM_DEEP_SLEEP. No action is taken for other
states at the moment.
This functionality is implemented in the shim driver first to enable
the feature, but will later be moved into QMSI.
Change-Id: I5784f6a2c63caaea5785ca5d92bb6cc3bc9fa4cc
Signed-off-by: Iván Briano <ivan.briano@intel.com>
Removed dead code inside sensor_lsm6ds0.h. There is no kconfig option
CONFIG_LSM6DS0_I2C_ADDR_6A neither 6B.
Also the #define LSM6DS0_I2C_ADDR is not in use.
Change-Id: Ib5a7f40d0d61542ed81687227df3795ba52ec725
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
In order to restore uart context after entering
SYS_PM_DEEP_SLEEP, suspend and resume functions
are called.
The following parameters are restored:
- All registers for the UART device.
- UART clocks.
The FIFO control register cannot be read back and is
not stored in the device configuration.
The default parameters are applied for them.
The suspend/resume functionality is implemented in
the QMSI shim layer as a fast and temporary solution,
it will be removed and migrated to QMSI later.
Change-Id: I4be9246f6aa5a6e0d91df54c1c69574060136607
Signed-off-by: Julien Delayen <julien.delayen@intel.com>
ieee802154 driver is now using new system log macros, update the
Kconfig variable to be a level rather than a bool and the .conf
files at samples.
JIRA: ZEP-311
Change-Id: I640e973d880c3a222cd7c13a72d35edf49ada3a8
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
DesignWare USB driver is now using new system log macros, updated
the Kconfig variable to be a level rather than a bool and the .conf
files at samples.
JIRA: ZEP-311
Change-Id: Ief46cadd954ca4b30a3a1cf2eba6e44ccbc9bc9f
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
Freescale K64 PWM driver is now using new system log macros, updated
the Kconfig variable to be a level rather than a bool.
JIRA: ZEP-311
Change-Id: I80d01ba75e8b186ef32861b372af4e2d15dd4131
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
Calls to flash write or erase operations can get preempted
in the middle of the API call if a concurrent call (from
other fiber or task) to the same API is made. The patch ensures
concurrent API calls from other fiber/task is put on hold until
the current operation is completed.
The mechanism is by default not activated. To enable
it, the following flag needs to be defined:
CONFIG_SOC_FLASH_QMSI_API_REENTRANCY
Jira: ZEP-414
Change-Id: I39429e40cb6ed446123dd1a1d7c7acc1b12417aa
Signed-off-by: Kuo-Lang Tseng <kuo-lang.tseng@intel.com>
pcal9535a driver is now using new system log macros and updated the
Kconfig variable to be a level rather than a bool.
JIRA: ZEP-311
Change-Id: Ic3d6c72630e66ac116c1e8954c32254677c51566
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
GPIO drivers are now using new system log macros also updated the
Kconfig variable to be a level rather than a bool.
JIRA: ZEP-311
Change-Id: I9a49626d816080cb8081c2dd445bae31f5dbf409
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
Drivers that implement power management should use the preferred
device_pm_ops method instead.
Change-Id: I9ae06e26b77325265bbe46bdee82ba39dedb6b79
Signed-off-by: Iván Briano <ivan.briano@intel.com>
Drivers that implement power management should use the preferred
device_pm_ops method instead.
Change-Id: I337722b1e06afe8508b5c84c00c3542571232e07
Signed-off-by: Iván Briano <ivan.briano@intel.com>
The suspend and resume hooks in the spi_driver_api struct are relics
from before the current power management infrastructure was in place.
The correct way to implement this now is through the device_pm_ops
struct, by way of the DEFINE_DEVICE_PM_OPS and DEVICE_AND_API_INIT_PM
macros, which make the hooks available through a generic mechanism for
all devices, rather than using per-type APIs.
Since the existing spi_suspend() and spi_resume() functions don't check
if the driver_api hooks are NULL, there's now a place holder function
to prevent breaking functionality until the hooks are removed.
Change-Id: I48287c58e9a8649d3e1be7547e3d0d293c84327a
Signed-off-by: Iván Briano <ivan.briano@intel.com>
The suspend and resume hooks in the spi_driver_api struct are relics
from before the current power management infrastructure was in place.
The correct way to implement this now is through the device_pm_ops
struct, by way of the DEFINE_DEVICE_PM_OPS and DEVICE_AND_API_INIT_PM
macros, which make the hooks available through a generic mechanism for
all devices, rather than using per-type APIs.
Since the existing spi_suspend() and spi_resume() functions don't check
if the driver_api hooks are NULL, there's now a place holder function
to prevent breaking functionality until the hooks are removed.
Change-Id: I6a3e3db370860ad46f428d287943b1ca58a80ae1
Signed-off-by: Iván Briano <ivan.briano@intel.com>
Drivers that implement power management should use the preferred
device_pm_ops method instead.
Change-Id: Ice9e0469a1fcb50eb64dcb240dddea56755b6e84
Signed-off-by: Iván Briano <ivan.briano@intel.com>
The suspend and resume hooks in the pwm_driver_api struct are relics
from before the current power management infrastructure was in place.
The correct way to implement this now is through the device_pm_ops
struct, by way of the DEFINE_DEVICE_PM_OPS and DEVICE_AND_API_INIT_PM
macros, which make the hooks available through a generic mechanism for
all devices, rather than using per-type APIs.
Since the existing pwm_suspend() and pwm_resume() functions don't check
if the driver_api hooks are NULL, there's now a place holder function
to prevent breaking functionality until the hooks are removed.
Change-Id: Ib6b03053b483f97a1f7441af5ba51503270b8674
Signed-off-by: Iván Briano <ivan.briano@intel.com>
Added CONFIG_SYS_LOG_I2C_LEVEL define, so that DW I2C driver will
not print traces unless requested with CONFIG_SYS_LOG_I2C_LEVEL.
Currently it doesn't obey it, so DW I2C spams DBG traces when
logging is enabled.
Change-Id: I87dc1d922ba61d39f26945627602864c75d9bf33
Signed-off-by: Jani Pajarinen <jani.pajarinen@intel.com>
Fixed undefined CONFIG_ISL29035_LUX_RANGE_4 in #elif
Change-Id: I2a7a6e46ffa0236da126d4e2c321e59302e54527
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
Guard critical section of the driver API, so that multiple
simultaneous calls from tasks/fibers won't corrupt the driver
state.
The locking mechanism is by default disabled. To enable it,
the following flag needs to be defined:
CONFIG_PWM_QMSI_API_REENTRANCY
Jira: ZEP-430
Change-Id: Ia3eb2a962f4176a3ac94163b9843ab068abe4b4e
Signed-off-by: Kuo-Lang Tseng <kuo-lang.tseng@intel.com>
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
In order to restore GPIO context after entering
SYS_PM_DEEP_SLEEP, the suspend and resume
functions for GPIO and GPOIO_AON are called. The
following parameters are restored:
- All non-sticky RW registers for the GPIO device.
- The MASK register (interrupt routing register).
Note: No need to sve/resume AON_GPIO registers as
they all are sticky registers.
The suspend/resume functionality is implemented in
the QMSI shim layer as a fast and temporary solution,
it will be removed and migrated to QMSI later.
Change-Id: I68e25c9da4bb8ea65f312e3686d9ef090cb775ff
Signed-off-by: Dragan Cvetic <dragan.cvetic@intel.com>
