pinmux/stm32: default pin assignment for STM32373C-EVAL board

Change-Id: Id4b04749e1d707d12aa78cabd8d103701b6d55b6
Signed-off-by: Adam Podogrocki <adam.podogrocki@rndity.com>
This commit is contained in:
Adam Podogrocki 2017-01-06 17:35:24 +01:00 committed by Kumar Gala
commit a0dcfcce97
2 changed files with 45 additions and 0 deletions

View file

@ -7,6 +7,7 @@ obj-$(CONFIG_PINMUX_BEETLE) += beetle/pinmux_board_v2m_beetle.o
obj-$(CONFIG_BOARD_NUCLEO_F103RB) += stm32/pinmux_board_nucleo_f103rb.o
obj-$(CONFIG_BOARD_STM3210C_EVAL) += stm32/pinmux_board_stm3210c_eval.o
obj-$(CONFIG_BOARD_NUCLEO_F334R8) += stm32/pinmux_board_nucleo_f334r8.o
obj-$(CONFIG_BOARD_STM32373C_EVAL) += stm32/pinmux_board_stm32373c_eval.o
obj-$(CONFIG_BOARD_NUCLEO_F401RE) += stm32/pinmux_board_nucleo_f401re.o
obj-$(CONFIG_BOARD_NUCLEO_F411RE) += stm32/pinmux_board_nucleo_f411re.o
obj-$(CONFIG_BOARD_96B_CARBON) += stm32/pinmux_board_carbon.o

View file

@ -0,0 +1,44 @@
/*
* Copyright (c) 2017 RnDity Sp. z o.o.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include <nanokernel.h>
#include <device.h>
#include <init.h>
#include <pinmux.h>
#include <sys_io.h>
#include "pinmux/pinmux.h"
#include "pinmux_stm32.h"
/* pin assignments for STM32373C-EVAL board */
static const struct pin_config pinconf[] = {
#ifdef CONFIG_UART_STM32_PORT_2
{STM32_PIN_PD5, STM32F3_PINMUX_FUNC_PD5_USART2_TX},
{STM32_PIN_PD6, STM32F3_PINMUX_FUNC_PD6_USART2_RX},
#endif /* CONFIG_UART_STM32_PORT_2 */
};
static int pinmux_stm32_init(struct device *port)
{
ARG_UNUSED(port);
stm32_setup_pins(pinconf, ARRAY_SIZE(pinconf));
return 0;
}
SYS_INIT(pinmux_stm32_init, PRE_KERNEL_1,
CONFIG_PINMUX_STM32_DEVICE_INITIALIZATION_PRIORITY);