.. |
96b_aerocore2
|
boards: arm: 96b_aerocore2: fix table rendering
|
2021-06-03 09:59:04 -05:00 |
96b_argonkey
|
boards: 96b_argonkey: Use dts for clocks configuration
|
2021-05-04 13:03:46 -05:00 |
96b_avenger96
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
96b_carbon
|
dts: add 'linaro,' prefix to 96b-lscon-1v8, 96b-lscon-3v3
|
2021-05-19 22:18:25 -05:00 |
96b_carbon_nrf51
|
dts: nrf: revert i2c sda-gpios, scl-gpios changes
|
2021-04-20 18:32:04 +02:00 |
96b_meerkat96
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
96b_neonkey
|
boards: 96b_neonkey: Use dts for clocks configuration
|
2021-05-04 13:03:46 -05:00 |
96b_nitrogen
|
dts: add 'linaro,' prefix to 96b-lscon-1v8, 96b-lscon-3v3
|
2021-05-19 22:18:25 -05:00 |
96b_stm32_sensor_mez
|
boards: 96b_stm32_sensor_mez: Use dts for clocks configuration
|
2021-05-04 13:03:46 -05:00 |
96b_wistrio
|
drivers/pinmux: stm32: Move stm32 driver from stm32/
|
2021-06-11 08:04:39 -05:00 |
actinius_icarus
|
boards: actinius_icarus: remove unused pwm nodes and add bootloader LED
|
2021-05-06 15:03:32 +02:00 |
actinius_icarus_bee
|
boards: arm: Add support for Actinius Icarus Bee (uC: Nordic nRF9160)
|
2021-05-06 15:03:32 +02:00 |
actinius_icarus_som
|
boards: arm: Add support for Actinius Icarus SoM (uC: Nordic nRF9160)
|
2021-05-06 15:03:32 +02:00 |
adafruit_feather_m0_basic_proto
|
arm: atmel: sam0: Rework device_get_binding for pinmux
|
2021-02-15 08:31:29 -05:00 |
adafruit_feather_nrf52840
|
dts: nrf: revert i2c sda-gpios, scl-gpios changes
|
2021-04-20 18:32:04 +02:00 |
adafruit_feather_stm32f405
|
boards: adafruit_feather_stm32f405: Use dts for clocks configuration
|
2021-05-04 13:10:46 -05:00 |
adafruit_itsybitsy_m4_express
|
arm: atmel: sam0: Rework device_get_binding for pinmux
|
2021-02-15 08:31:29 -05:00 |
adafruit_trinket_m0
|
arm: atmel: sam0: Rework device_get_binding for pinmux
|
2021-02-15 08:31:29 -05:00 |
arduino_due
|
boards: arm: correct documentation about SVC exception
|
2021-04-23 15:27:01 -05:00 |
arduino_nano_33_ble
|
boards/arduino_nano_33_ble: add storage partition at end of flash
|
2021-06-10 18:44:50 -05:00 |
arduino_nano_33_iot
|
drivers: wifi: esp_at: rename driver from esp
|
2021-05-06 13:21:39 -04:00 |
arduino_zero
|
arm: atmel: sam0: Rework device_get_binding for pinmux
|
2021-02-15 08:31:29 -05:00 |
arty
|
doc: use kconfig role and directive
|
2021-06-29 10:26:28 -04:00 |
atsamd20_xpro
|
arm: atmel: sam0: Rework device_get_binding for pinmux
|
2021-02-15 08:31:29 -05:00 |
atsamd21_xpro
|
arm: atmel: sam0: Rework device_get_binding for pinmux
|
2021-02-15 08:31:29 -05:00 |
atsame54_xpro
|
arm: atmel: sam0: Rework device_get_binding for pinmux
|
2021-02-15 08:31:29 -05:00 |
atsamr21_xpro
|
arm: atmel: sam0: Rework device_get_binding for pinmux
|
2021-02-15 08:31:29 -05:00 |
b_l4s5i_iot01a
|
boards: arm: b_l4s5i_iot01a: full Arduino SPI support
|
2021-06-29 11:32:15 -04:00 |
b_l072z_lrwan1
|
boards: b_l072z_lrwan1: enable power management support
|
2021-06-24 21:06:25 -04:00 |
bbc_microbit
|
dts: nrf: revert i2c sda-gpios, scl-gpios changes
|
2021-04-20 18:32:04 +02:00 |
bbc_microbit_v2
|
dts: nrf: revert i2c sda-gpios, scl-gpios changes
|
2021-04-20 18:32:04 +02:00 |
bcm958401m2
|
driver: uart: ns16550: convert to DT_INST_*
|
2020-03-14 02:22:05 +02:00 |
bcm958402m2_m7
|
boards: arm: bcm958402m2_m7: Enable PAXDMA driver
|
2021-03-08 20:24:04 -06:00 |
bl652_dvk
|
dts: nrf: revert i2c sda-gpios, scl-gpios changes
|
2021-04-20 18:32:04 +02:00 |
bl653_dvk
|
dts: nrf: revert i2c sda-gpios, scl-gpios changes
|
2021-04-20 18:32:04 +02:00 |
bl654_dvk
|
dts: nrf: revert i2c sda-gpios, scl-gpios changes
|
2021-04-20 18:32:04 +02:00 |
bl654_sensor_board
|
boards: bl654_sensor_board
|
2021-05-06 18:36:02 +02:00 |
bl5340_dvk
|
boards: fixing typo from MX24R64 to MX25R64
|
2021-07-12 16:07:08 -05:00 |
black_f407ve
|
boards: black_f407ve: Use dts for clocks configuration
|
2021-05-04 13:03:46 -05:00 |
black_f407zg_pro
|
boards: black_f407zg_pro: Use dts for clocks configuration
|
2021-05-04 13:03:46 -05:00 |
blackpill_f401ce
|
boards: stm32: blackpill_f401ce: configure clocks using dt
|
2021-04-30 12:40:24 -05:00 |
blackpill_f411ce
|
boards: stm32: blackpill_f411ce: configure clocks using dt
|
2021-04-30 12:40:24 -05:00 |
bt6x0
|
boards: Add Laird Connectivity BT6x0
|
2021-05-06 18:34:34 +02:00 |
bt510
|
boards: arm: bt510: add support for pyocd
|
2021-05-07 12:57:55 -05:00 |
cc26x2r1_launchxl
|
power: dts: Add exit-latency info for SOC_SERIES_CC13X2_CC26X2
|
2021-07-21 17:54:40 +03:00 |
cc1352r1_launchxl
|
power: dts: Add exit-latency info for SOC_SERIES_CC13X2_CC26X2
|
2021-07-21 17:54:40 +03:00 |
cc1352r_sensortag
|
power: dts: Add exit-latency info for SOC_SERIES_CC13X2_CC26X2
|
2021-07-21 17:54:40 +03:00 |
cc3220sf_launchxl
|
doc: use kconfig role and directive
|
2021-06-29 10:26:28 -04:00 |
cc3235sf_launchxl
|
doc: use kconfig role and directive
|
2021-06-29 10:26:28 -04:00 |
circuitdojo_feather_nrf9160
|
boards: arm: nrf: Adding updated Circuit Dojo board definitions.
|
2021-05-06 18:38:57 +02:00 |
colibri_imx7d_m4
|
doc: colibri board: Add missing empty lines
|
2021-06-02 08:15:25 -05:00 |
contextualelectronics_abc
|
dts: nrf: revert i2c sda-gpios, scl-gpios changes
|
2021-04-20 18:32:04 +02:00 |
cy8ckit_062_ble
|
boards: arm: cy8ckit_062_ble: Move shared to common
|
2021-07-02 22:50:29 -04:00 |
cy8ckit_062_wifi_bt
|
boards: arm: cy8ckit_062_wifi_bt: Add serial pinctrl and int
|
2021-04-27 09:27:45 -05:00 |
decawave_dwm1001_dev
|
dts: nrf: revert i2c sda-gpios, scl-gpios changes
|
2021-04-20 18:32:04 +02:00 |
degu_evk
|
dts: nrf: revert i2c sda-gpios, scl-gpios changes
|
2021-04-20 18:32:04 +02:00 |
disco_l475_iot1
|
boards: arm: disco_l475_iot1 board DTS of the dma-cell on quadspi
|
2021-07-22 04:52:53 -04:00 |
dragino_lsn50
|
boards: dragino_lsn50: Use dts for clocks configuration
|
2021-04-30 12:42:42 -05:00 |
efm32gg_slwstk6121a
|
boards: silabs: Remove unneeded zephyr_include_directories
|
2021-03-23 16:44:48 -05:00 |
efm32gg_stk3701a
|
boards: silabs: Fix board controller init priority
|
2021-03-26 08:40:28 -04:00 |
efm32hg_slstk3400a
|
boards: silabs: Fix board controller init priority
|
2021-03-26 08:40:28 -04:00 |
efm32pg_stk3401a
|
boards: silabs: Fix board controller init priority
|
2021-03-26 08:40:28 -04:00 |
efm32pg_stk3402a
|
boards: silabs: Fix board controller init priority
|
2021-03-26 08:40:28 -04:00 |
efm32wg_stk3800
|
boards: silabs: Fix board controller init priority
|
2021-03-26 08:40:28 -04:00 |
efr32_radio
|
gecko pwm: pwm description to efr32fg1 and brd4250b
|
2021-04-02 18:45:33 -04:00 |
efr32mg_sltb004a
|
boards: silabs: Fix board controller init priority
|
2021-03-26 08:40:28 -04:00 |
faze
|
dts: atmel/nxp: supress duplicate unit-address warning
|
2021-02-04 10:05:47 -05:00 |
frdm_k22f
|
boards: arm: Add arduino_spi to supported list for NXP boards
|
2021-05-19 08:14:25 -05:00 |
frdm_k64f
|
frdm_k64f/doc: Add tabs to debug section to improve readability
|
2021-07-21 05:45:03 -04:00 |
frdm_k82f
|
boards: frdm_k82f: Add arduino_i2c and arduino_spi support
|
2021-06-04 16:13:43 -05:00 |
frdm_kl25z
|
arm: nxp: kinetis: Remove explicity setting of pincfg to GPIO
|
2021-04-15 12:25:05 +02:00 |
frdm_kw41z
|
dts: nxp: default SPI0 to being disabled
|
2021-05-04 13:03:00 -05:00 |
google_kukui
|
boards: google_kukui: Use dts for clocks configuration
|
2021-05-04 13:01:54 -05:00 |
hexiwear_k64
|
boards: hexiwear_k64: Drop SPI as supported board feature
|
2021-05-05 11:08:33 -05:00 |
hexiwear_kw40z
|
boards: arm: hexiwear_kw40z: Add pinctrl dts properties
|
2021-04-14 09:06:36 -05:00 |
holyiot_yj16019
|
runners: nrfjprog: boilerplate and recover rework
|
2020-12-09 15:00:24 -06:00 |
ip_k66f
|
net: ethernet: bridging support
|
2021-07-21 18:20:01 -04:00 |
lora_e5_dev_board
|
boards: nucleo_wl55jc and lora_e5_dev_board enable aes
|
2021-07-23 16:25:27 -04:00 |
lpcxpresso11u68
|
boards: arm: Add arduino_serial to supported list for NXP boards
|
2021-05-18 12:35:39 +03:00 |
lpcxpresso55s16
|
drivers: gpio: mcux_lpc: Convert driver to use devicetree port prop
|
2021-05-31 17:45:05 +02:00 |
lpcxpresso55s28
|
drivers: gpio: mcux_lpc: Convert driver to use devicetree port prop
|
2021-05-31 17:45:05 +02:00 |
lpcxpresso55s69
|
boards: arm: lpcxpresso55s69: Fix sram partitioning in devicetree
|
2021-07-23 09:10:56 -05:00 |
lpcxpresso54114
|
drivers: gpio: mcux_lpc: Convert driver to use devicetree port prop
|
2021-05-31 17:45:05 +02:00 |
mec15xxevb_assy6853
|
boards: arm: mec15xx: Add missing virtual wire GIRQ
|
2021-06-07 23:52:17 -04:00 |
mec172xevb_assy6906
|
Microchip: MEC172x clock control driver
|
2021-07-21 17:46:07 -04:00 |
mec1501modular_assy6885
|
boards: arm: mec15xx: Add missing virtual wire GIRQ
|
2021-06-07 23:52:17 -04:00 |
mec2016evb_assy6797
|
device: Const-ify all device driver instance pointers
|
2020-09-02 13:48:13 +02:00 |
mercury_xu
|
boards: arm: add suport for Enclustra Mercury XU boards
|
2020-12-27 18:16:00 +01:00 |
mikroe_clicker_2
|
boards: arm: stm32: clean up dts after clock conversion
|
2021-05-12 08:35:03 -05:00 |
mikroe_mini_m4_for_stm32
|
boards: mikroe_mini_m4_for_stm32: Use dts for clocks configuration
|
2021-05-04 13:03:46 -05:00 |
mimx8mm_evk
|
boards: i.mx: Remove unneeded zephyr_include_directories
|
2021-03-23 13:41:05 -05:00 |
mimxrt685_evk
|
mimxrt685_evk/doc: Add tabs to debug section to improve readability
|
2021-07-21 05:45:03 -04:00 |
mimxrt1010_evk
|
boards: mimxrt1010_evk: Point SRAM to OCRAM
|
2021-05-24 23:31:46 -04:00 |
mimxrt1015_evk
|
boards: add USB node aliases
|
2021-05-21 18:16:25 -04:00 |
mimxrt1020_evk
|
boards: arm: mimxrt1020_evk: SD Card
|
2021-06-08 11:20:29 -05:00 |
mimxrt1024_evk
|
boards: imx-rt: Remove unneeded zephyr_include_directories
|
2021-03-23 16:12:58 -05:00 |
mimxrt1050_evk
|
doc: use kconfig role and directive
|
2021-06-29 10:26:28 -04:00 |
mimxrt1060_evk
|
doc: use kconfig role and directive
|
2021-06-29 10:26:28 -04:00 |
mimxrt1064_evk
|
doc: use kconfig role and directive
|
2021-06-29 10:26:28 -04:00 |
mimxrt1170_evk
|
driver: adc: an adc driver for rt1170
|
2021-07-20 13:15:58 -05:00 |
mm_swiftio
|
boards: mm_swiftio: fix sdcard power issue
|
2021-04-19 08:25:55 -05:00 |
mps2_an385
|
boards: arm: mps2_an385: correct flash and SRAM sizes
|
2021-04-23 15:27:01 -05:00 |
mps2_an521
|
boards: arm: mps2_an521: Rename NS target
|
2021-07-10 12:44:02 -04:00 |
mps3_an547
|
boards: arm: mps3_an547: Enable FVP and QEMU simulation
|
2021-06-19 16:55:40 -05:00 |
msp_exp432p401r_launchxl
|
kconfig: Rename CONFIG_FLOAT to CONFIG_FPU
|
2020-04-27 19:03:44 +02:00 |
npcx7m6fb_evb
|
dts: pcc: npcx: add properties of pcc node to configure clock settings
|
2021-06-21 18:47:31 -04:00 |
npcx9m6f_evb
|
dts: pcc: npcx: add properties of pcc node to configure clock settings
|
2021-06-21 18:47:31 -04:00 |
nrf51_ble400
|
dts: nrf: revert i2c sda-gpios, scl-gpios changes
|
2021-04-20 18:32:04 +02:00 |
nrf51_blenano
|
boards: dts: nrf: Remove SoC compatible in top-level compatible
|
2020-04-29 08:20:15 -05:00 |
nrf51_vbluno51
|
dts: nrf: revert i2c sda-gpios, scl-gpios changes
|
2021-04-20 18:32:04 +02:00 |
nrf51dk_nrf51422
|
dts: nrf: revert i2c sda-gpios, scl-gpios changes
|
2021-04-20 18:32:04 +02:00 |
nrf51dongle_nrf51422
|
runners: nrfjprog: boilerplate and recover rework
|
2020-12-09 15:00:24 -06:00 |
nrf52_adafruit_feather
|
dts: nrf: revert i2c sda-gpios, scl-gpios changes
|
2021-04-20 18:32:04 +02:00 |
nrf52_blenano2
|
dts: nrf: revert i2c sda-gpios, scl-gpios changes
|
2021-04-20 18:32:04 +02:00 |
nrf52_sparkfun
|
boards: arm: remove non-existing doc link from partition definitions
|
2020-10-27 15:01:19 -04:00 |
nrf52_vbluno52
|
dts: nrf: revert i2c sda-gpios, scl-gpios changes
|
2021-04-20 18:32:04 +02:00 |
nrf52dk_nrf52805
|
dts: nrf: revert i2c sda-gpios, scl-gpios changes
|
2021-04-20 18:32:04 +02:00 |
nrf52dk_nrf52810
|
dts: nrf: revert i2c sda-gpios, scl-gpios changes
|
2021-04-20 18:32:04 +02:00 |
nrf52dk_nrf52832
|
dts: nrf: revert i2c sda-gpios, scl-gpios changes
|
2021-04-20 18:32:04 +02:00 |
nrf5340dk_nrf5340
|
boards: fixing typo from MX24R64 to MX25R64
|
2021-07-12 16:07:08 -05:00 |
nrf9160_innblue21
|
dts: nrf: revert i2c sda-gpios, scl-gpios changes
|
2021-04-20 18:32:04 +02:00 |
nrf9160_innblue22
|
dts: nrf: revert i2c sda-gpios, scl-gpios changes
|
2021-04-20 18:32:04 +02:00 |
nrf9160dk_nrf9160
|
boards: arm: nrf9160dk_nrf9160: Rename NS target
|
2021-07-10 12:44:02 -04:00 |
nrf9160dk_nrf52840
|
boards: nrf9160dk: Remove empty .conf files
|
2021-04-01 07:30:36 -05:00 |
nrf21540dk_nrf52840
|
boards: add USB node aliases
|
2021-05-21 18:16:25 -04:00 |
nrf52832_mdk
|
dts: nrf: revert i2c sda-gpios, scl-gpios changes
|
2021-04-20 18:32:04 +02:00 |
nrf52833dk_nrf52820
|
boards: add USB node aliases
|
2021-05-21 18:16:25 -04:00 |
nrf52833dk_nrf52833
|
boards: add USB node aliases
|
2021-05-21 18:16:25 -04:00 |
nrf52840_blip
|
dts: nrf: revert i2c sda-gpios, scl-gpios changes
|
2021-04-20 18:32:04 +02:00 |
nrf52840_mdk
|
Bluetooth: Mesh: Align capitalization for BT mesh
|
2021-07-13 11:23:54 -04:00 |
nrf52840_papyr
|
dts: nrf: revert i2c sda-gpios, scl-gpios changes
|
2021-04-20 18:32:04 +02:00 |
nrf52840dk_nrf52811
|
dts: nrf: revert i2c sda-gpios, scl-gpios changes
|
2021-04-20 18:32:04 +02:00 |
nrf52840dk_nrf52840
|
boards: fixing typo from MX24R64 to MX25R64
|
2021-07-12 16:07:08 -05:00 |
nrf52840dongle_nrf52840
|
doc: use kconfig role and directive
|
2021-06-29 10:26:28 -04:00 |
nucleo_f030r8
|
boards: arm: nucleo_f030r8: full Arduino SPI support
|
2021-06-29 11:32:15 -04:00 |
nucleo_f031k6
|
boards: nucleo_f031k6: Use dts for clocks configuration
|
2021-05-04 13:01:54 -05:00 |
nucleo_f070rb
|
boards: arm: nucleo_f070rb: full Arduino SPI support
|
2021-06-29 11:32:15 -04:00 |
nucleo_f091rc
|
boards: nucleo_f091rc: Use dts for clocks configuration
|
2021-05-03 19:58:06 -04:00 |
nucleo_f103rb
|
boards: arm: nucleo_f103rb: full Arduino SPI support
|
2021-06-29 11:32:15 -04:00 |
nucleo_f207zg
|
boards/arm: nucleo_f207zg: Enabling true rng (Random Number Generator)
|
2021-07-15 06:46:18 -04:00 |
nucleo_f302r8
|
boards: arm: nucleo_f302r8: full Arduino SPI support
|
2021-06-29 11:32:15 -04:00 |
nucleo_f303k8
|
boards: arm: stm32: clean up dts after clock conversion
|
2021-05-12 08:35:03 -05:00 |
nucleo_f303re
|
boards: nucleo_f303re: Use dts for clocks configuration
|
2021-05-03 07:52:35 -05:00 |
nucleo_f334r8
|
boards: arm: nucleo_f334r8: full Arduino SPI support
|
2021-06-29 11:32:15 -04:00 |
nucleo_f401re
|
boards: arm: nucleo_f401re: full Arduino SPI support
|
2021-06-29 11:32:15 -04:00 |
nucleo_f410rb
|
boards: nucleo_f410rb: Use dts for clocks configuration
|
2021-05-04 13:10:46 -05:00 |
nucleo_f411re
|
boards: arm: stm32: clean up dts after clock conversion
|
2021-05-12 08:35:03 -05:00 |
nucleo_f412zg
|
boards: arm: nucleo_f412zg: full Arduino SPI support
|
2021-06-29 11:32:15 -04:00 |
nucleo_f413zh
|
boards: arm: nucleo_f413zh: full Arduino SPI support
|
2021-06-29 11:32:15 -04:00 |
nucleo_f429zi
|
boards: arm: nucleo_f429zi: full Arduino SPI support
|
2021-06-29 11:32:15 -04:00 |
nucleo_f446re
|
boards: nucleo_f446re: Use dts for clocks configuration
|
2021-05-04 13:10:46 -05:00 |
nucleo_f746zg
|
boards: arm: nucleo_f746zg: full Arduino SPI support
|
2021-06-29 11:32:15 -04:00 |
nucleo_f756zg
|
boards: arm: nucleo_f756zg: full Arduino SPI support
|
2021-06-29 11:32:15 -04:00 |
nucleo_f767zi
|
boards: arm: nucleo_f767zi: full Arduino SPI support
|
2021-06-29 11:32:15 -04:00 |
nucleo_g0b1re
|
boards: stm32: Update pwm nodes after change of default "st,prescaler"
|
2021-06-16 10:41:01 +02:00 |
nucleo_g071rb
|
boards: stm32: Update pwm nodes after change of default "st,prescaler"
|
2021-06-16 10:41:01 +02:00 |
nucleo_g431rb
|
boards: arm: nucleo_g431rb: fix Arduino SPI support
|
2021-06-29 11:32:15 -04:00 |
nucleo_g474re
|
boards: arm: nucleo_g474re: fix Arduino SPI support
|
2021-06-29 11:32:15 -04:00 |
nucleo_h723zg
|
boards: stm32: Update pwm nodes after change of default "st,prescaler"
|
2021-06-16 10:41:01 +02:00 |
nucleo_h743zi
|
boards: arm: nucleo_h743zi: full Arduino SPI support
|
2021-06-29 11:32:15 -04:00 |
nucleo_h745zi_q
|
boards: stm32: Update pwm nodes after change of default "st,prescaler"
|
2021-06-16 10:41:01 +02:00 |
nucleo_h753zi
|
boards: arm: nucleo_h753zi: full Arduino SPI support
|
2021-06-29 11:32:15 -04:00 |
nucleo_l4r5zi
|
boards: arm: nucleo_l4r5zi: full Arduino SPI support
|
2021-06-29 11:32:15 -04:00 |
nucleo_l011k4
|
boards: nucleo_l011k4: Use dts for clocks configuration
|
2021-04-30 12:42:42 -05:00 |
nucleo_l031k6
|
boards: nucleo_l031k6: Use dts for clocks configuration
|
2021-05-03 19:58:06 -04:00 |
nucleo_l053r8
|
boards: arm: stm32: clean up dts after clock conversion
|
2021-05-12 08:35:03 -05:00 |
nucleo_l073rz
|
boards: nucleo_l073rz: Use dts for clocks configuration
|
2021-05-03 19:58:06 -04:00 |
nucleo_l152re
|
boards: nucleo_l152re: Explicitly set apb2-prescaler
|
2021-05-05 16:34:37 -05:00 |
nucleo_l412rb_p
|
boards: arm: nucleo_l412rb_p: full Arduino SPI support
|
2021-06-29 11:32:15 -04:00 |
nucleo_l432kc
|
boards: nucleo_l432kc: Use dts for clocks configuration
|
2021-04-30 12:50:30 -05:00 |
nucleo_l433rc_p
|
boards: arm: nucleo_l433rc_p: add Arduino SPI support
|
2021-06-29 11:32:15 -04:00 |
nucleo_l452re
|
boards: arm: nucleo_l452re: full Arduino SPI support
|
2021-06-29 11:32:15 -04:00 |
nucleo_l476rg
|
boards: arm: nucleo_l476rg: add Arduino SPI support
|
2021-06-29 11:32:15 -04:00 |
nucleo_l496zg
|
boards: arm: nucleo_l496zg: full Arduino SPI support
|
2021-06-29 11:32:15 -04:00 |
nucleo_l552ze_q
|
boards/arm: nucleo_l552ze_q: Enabling spi1
|
2021-07-10 12:43:19 -04:00 |
nucleo_wb55rg
|
boards/arm: nucleo_wb55rg: Enabling rng (Random Number Generator)
|
2021-07-09 09:19:39 -05:00 |
nucleo_wl55jc
|
boards: nucleo_wl55jc and lora_e5_dev_board enable aes
|
2021-07-23 16:25:27 -04:00 |
nuvoton_pfm_m487
|
board: arm: add support for nuvoton pfm m487
|
2020-07-01 21:09:25 +02:00 |
olimex_stm32_e407
|
boards: olimex_stm32_e407: Use dts for clocks configuration
|
2021-05-04 13:03:46 -05:00 |
olimex_stm32_h103
|
boards: stm32: Update pwm nodes after change of default "st,prescaler"
|
2021-06-16 10:41:01 +02:00 |
olimex_stm32_h407
|
boards: olimex_stm32_h407: Use dts for clocks configuration
|
2021-05-04 13:03:46 -05:00 |
olimex_stm32_p405
|
boards: olimex_stm32_p405: Use dts for clocks configuration
|
2021-05-04 13:03:46 -05:00 |
olimexino_stm32
|
boards: stm32: Update pwm nodes after change of default "st,prescaler"
|
2021-06-16 10:41:01 +02:00 |
particle_argon
|
dts: nrf: revert i2c sda-gpios, scl-gpios changes
|
2021-04-20 18:32:04 +02:00 |
particle_boron
|
dts: nrf: revert i2c sda-gpios, scl-gpios changes
|
2021-04-20 18:32:04 +02:00 |
particle_xenon
|
dts: nrf: revert i2c sda-gpios, scl-gpios changes
|
2021-04-20 18:32:04 +02:00 |
pico_pi_m4
|
boards: i.mx: Remove unneeded zephyr_include_directories
|
2021-03-23 13:41:05 -05:00 |
pinetime_devkit0
|
dts: nrf: revert i2c sda-gpios, scl-gpios changes
|
2021-04-20 18:32:04 +02:00 |
pinnacle_100_dvk
|
dts: nrf: revert i2c sda-gpios, scl-gpios changes
|
2021-04-20 18:32:04 +02:00 |
qemu_cortex_m0
|
boards: arm: qemu_cortex_m0: use LFXTAL
|
2021-04-29 14:50:35 +02:00 |
qemu_cortex_m3
|
arm: shrink names for null-pointer exception detection Kconfigs
|
2021-05-26 12:30:05 -05:00 |
qemu_cortex_r5
|
tests: filter default platforms
|
2021-02-19 14:41:01 -05:00 |
quick_feather
|
boards: arm: Remove unneeded zephyr_include_directories
|
2021-03-24 05:43:42 -04:00 |
rak4631_nrf52840
|
dts: remove remaining nRF {scl,sda}-gpios
|
2021-04-20 18:32:04 +02:00 |
rak5010_nrf52840
|
dts: nrf: revert i2c sda-gpios, scl-gpios changes
|
2021-04-20 18:32:04 +02:00 |
rcar_h3ulcb
|
boards: arm: rcar_h3ulcb: Enable I2C
|
2021-07-14 20:58:50 -04:00 |
reel_board
|
dts: nrf: revert i2c sda-gpios, scl-gpios changes
|
2021-04-20 18:32:04 +02:00 |
ronoth_lodev
|
boards: arm: stm32: clean up dts after clock conversion
|
2021-05-12 08:35:03 -05:00 |
ruuvi_ruuvitag
|
runners: nrfjprog: boilerplate and recover rework
|
2020-12-09 15:00:24 -06:00 |
sam4e_xpro
|
boards: arm: sam4: Enable bossac bootloader runner
|
2020-12-07 09:11:34 -06:00 |
sam4l_ek
|
boards: arm: sam4l_ek: Enable gpio tests
|
2020-12-02 11:48:43 -06:00 |
sam4s_xplained
|
boards: arm: sam4: Enable bossac bootloader runner
|
2020-12-07 09:11:34 -06:00 |
sam_e70_xplained
|
soc: atmel_sam: set SYS_CLOCK_HW_CYCLES_PER_SEC from DT
|
2021-06-22 17:30:15 -04:00 |
sam_v71_xult
|
soc: atmel_sam: set SYS_CLOCK_HW_CYCLES_PER_SEC from DT
|
2021-06-22 17:30:15 -04:00 |
seeeduino_xiao
|
boards: seeeduino_xiao: Output UF2 by default.
|
2021-02-23 21:11:04 +01:00 |
segger_trb_stm32f407
|
boards: segger_trb_stm32f407: Use dts for clocks configuration
|
2021-05-04 13:10:46 -05:00 |
sensortile_box
|
drivers/sensor: lis2mdl: Add multi-instance support
|
2021-06-04 16:29:45 -05:00 |
serpente
|
arm: atmel: sam0: Rework device_get_binding for pinmux
|
2021-02-15 08:31:29 -05:00 |
sparkfun_thing_plus_nrf9160
|
boards: arm: nrf: Adding updated Circuit Dojo board definitions.
|
2021-05-06 18:38:57 +02:00 |
steval_fcu001v1
|
boards: steval_fcu001v1: Use dts for clocks configuration
|
2021-05-04 13:10:46 -05:00 |
stm32_min_dev
|
board/STm32_Mini_dev_x_defconfig: ARM_MPU enabled without MPU.
|
2021-06-29 10:51:33 -04:00 |
stm32f0_disco
|
boards: stm32f0_disco: Use dts for clocks configuration
|
2021-05-04 13:01:54 -05:00 |
stm32f3_disco
|
boards: stm32: Update pwm nodes after change of default "st,prescaler"
|
2021-06-16 10:41:01 +02:00 |
stm32f4_disco
|
boards: stm32f4_disco: Use dts for clocks configuration
|
2021-05-04 13:10:46 -05:00 |
stm32f030_demo
|
boards: stm32f030_demo: Use dts for clocks configuration
|
2021-05-04 13:01:54 -05:00 |
stm32f072_eval
|
boards: stm32f072_eval: Use dts for clocks configuration
|
2021-05-04 13:01:54 -05:00 |
stm32f072b_disco
|
boards: stm32f072b_disco: Use dts for clocks configuration
|
2021-05-04 13:01:54 -05:00 |
stm32f103_mini
|
boards: stm32: Update pwm nodes after change of default "st,prescaler"
|
2021-06-16 10:41:01 +02:00 |
stm32f411e_disco
|
boards: stm32: Update pwm nodes after change of default "st,prescaler"
|
2021-06-16 10:41:01 +02:00 |
stm32f412g_disco
|
boards: stm32f412g_disco: Add arduino headers
|
2021-05-06 08:17:07 -05:00 |
stm32f429i_disc1
|
boards: stm32f429i_disc1: add sdram support
|
2021-06-29 11:30:35 -04:00 |
stm32f469i_disco
|
boards: arm: stm32f469i_disco: add Arduino SPI support
|
2021-06-29 11:32:15 -04:00 |
stm32f723e_disco
|
boards: arm: stm32f723e_disco: add Arduino SPI support
|
2021-06-29 11:32:15 -04:00 |
stm32f746g_disco
|
boards: arm: stm32f746g_disco: full Arduino SPI support
|
2021-06-29 11:32:15 -04:00 |
stm32f769i_disco
|
boards: arm: stm32f769i_disco: add Arduino SPI support
|
2021-06-29 11:32:15 -04:00 |
stm32g071b_disco
|
boards: stm32g071b_disco: Use dts for clocks configuration
|
2021-05-03 19:58:21 -04:00 |
stm32g0316_disco
|
drivers/pinmux: stm32: Move stm32 driver from stm32/
|
2021-06-11 08:04:39 -05:00 |
stm32h735g_disco
|
boards: arm: fix build of civetweb example for STM32H735G discovery kit
|
2021-07-09 07:45:07 -04:00 |
stm32h747i_disco
|
boards: arm: stm32h747i_disco: rework uart split between CM4 and CM7
|
2021-06-29 11:32:15 -04:00 |
stm32l1_disco
|
boards: stm32l1_disco: Use dts for clocks configuration
|
2021-04-30 12:41:30 -05:00 |
stm32l476g_disco
|
boards: stm32l476g_disco: Use dts for clocks configuration
|
2021-04-30 12:50:30 -05:00 |
stm32l496g_disco
|
boards/arm: stm32l496g_disco: Enabling adc support
|
2021-07-21 10:02:24 +03:00 |
stm32l562e_dk
|
boards: stm32l562e_dk enable aes peripheral
|
2021-07-23 16:25:27 -04:00 |
stm32mp157c_dk2
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
stm32vl_disco
|
boards: stm32: Update pwm nodes after change of default "st,prescaler"
|
2021-06-16 10:41:01 +02:00 |
stm3210c_eval
|
boards: stm3210c_eval: Use dts for clocks configuration
|
2021-05-04 13:02:26 -05:00 |
stm32373c_eval
|
boards: stm32373c_eval: Use dts for clocks configuration
|
2021-05-03 07:52:35 -05:00 |
teensy4
|
board: arm: add support for the teensy4 board
|
2021-07-19 12:15:42 -05:00 |
thingy52_nrf52832
|
boards: thingy52_nrf52832: Update gpio-leds binding
|
2021-04-23 14:59:58 +02:00 |
thingy53_nrf5340
|
boards: fixing typo from MX24R64 to MX25R64
|
2021-07-12 16:07:08 -05:00 |
twr_ke18f
|
boards: arm: twr_ke18f: enable cpu power-states
|
2021-07-14 22:54:34 +03:00 |
twr_kv58f220m
|
arm: nxp: kinetis: Remove explicity setting of pincfg to GPIO
|
2021-04-15 12:25:05 +02:00 |
ubx_bmd300eval_nrf52832
|
boards: u-blox: fix invalid compatibles
|
2021-05-19 22:18:25 -05:00 |
ubx_bmd330eval_nrf52810
|
boards: u-blox: fix invalid compatibles
|
2021-05-19 22:18:25 -05:00 |
ubx_bmd340eval_nrf52840
|
boards: fixing typo from MX24R64 to MX25R64
|
2021-07-12 16:07:08 -05:00 |
ubx_bmd345eval_nrf52840
|
boards: fixing typo from MX24R64 to MX25R64
|
2021-07-12 16:07:08 -05:00 |
ubx_bmd360eval_nrf52811
|
boards: u-blox: fix invalid compatibles
|
2021-05-19 22:18:25 -05:00 |
ubx_bmd380eval_nrf52840
|
boards: u-blox: fix invalid compatibles
|
2021-05-19 22:18:25 -05:00 |
ubx_evkannab1_nrf52832
|
boards: arm: Add u-blox EVK-ANNA-B1
|
2021-04-22 11:07:35 +02:00 |
ubx_evkninab1_nrf52832
|
boards: arm: Add u-blox EVK-NINA-B1
|
2021-04-27 13:33:20 -04:00 |
ubx_evkninab3_nrf52840
|
boards: arm: ubx_evkninab3_nrf52840 correct LED order
|
2021-06-24 09:30:11 +02:00 |
ubx_evkninab4_nrf52833
|
boards: arm: Add u-blox EVK-NINA-B4
|
2021-04-29 09:52:19 -04:00 |
udoo_neo_full_m4
|
boards: i.mx: Remove unneeded zephyr_include_directories
|
2021-03-23 13:41:05 -05:00 |
usb_kw24d512
|
boards: usb_kw24d512: Remove unconnected devices
|
2021-05-04 13:03:00 -05:00 |
v2m_beetle
|
boards: arm: correct documentation about SVC exception
|
2021-04-23 15:27:01 -05:00 |
v2m_musca_b1
|
boards: arm: v2m_musca_b1: Rename NS target
|
2021-07-10 12:44:02 -04:00 |
v2m_musca_s1
|
boards: arm: v2m_musca_s1: Rename NS target
|
2021-07-10 12:44:02 -04:00 |
warp7_m4
|
boards: i.mx: Remove unneeded zephyr_include_directories
|
2021-03-23 13:41:05 -05:00 |
waveshare_open103z
|
boards: waveshare_open103z: Use dts for clocks configuration
|
2021-05-04 13:02:26 -05:00 |
xmc45_relax_kit
|
boards: arm: xmc45_relax_kit: minor doc fixes
|
2020-06-02 15:14:45 +02:00 |
index.rst
|
doc: fix sidebar nav issues with board docs
|
2017-06-27 19:21:29 -04:00 |