michaelh/zephyr
1
0
Fork 0
Code Releases Activity

boards: arm: nucleo_f030r8: full Arduino SPI support

Browse source 
Full Arduino SPI support for nucleo_f030r8

Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
This commit is contained in:
Alexandre Bourdiol 2021-06-17 10:30:10 +02:00 • committed by Anas Nashif
commit 35d674829c
2 changed files with 3 additions and 3 deletions
Download patch file Download diff file Expand all files Collapse all files

2
boards/arm/nucleo_f030r8/doc/index.rst
View file

@ -124,7 +124,7 @@ Default Zephyr Peripheral Mapping:
- UART_2 TX/RX : PA2/PA3 (ST-Link Virtual COM Port)
- I2C1 SCL/SDA : PB8/PB9 (Arduino I2C)
- I2C2 SCL/SDA : PB10/PB11
- SPI1 NSS/SCK/MISO/MOSI : PA4/PA5/PA6/PA7 (Arduino SPI)
- SPI1 NSS/SCK/MISO/MOSI : PB6/PA5/PA6/PA7 (Arduino SPI)
- SPI2 NSS/SCK/MISO/MOSI : PB12/PB13/PB14/PB15
- USER_PB : PC13
- LD1 : PA5

4
boards/arm/nucleo_f030r8/nucleo_f030r8.dts
View file

@ -92,8 +92,8 @@
};
&spi1 {
pinctrl-0 = <&spi1_nss_pa4 &spi1_sck_pa5
&spi1_miso_pa6 &spi1_mosi_pa7>;
pinctrl-0 = <&spi1_sck_pa5 &spi1_miso_pa6 &spi1_mosi_pa7>;
cs-gpios = <&gpiob 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
status = "okay";
};