The fake exception return is used to jump to user mode.
So the init status of user thread is in exception mode.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
stack check bit of status32/sec_stat will be cleared
automically in exception entry.
so remove the redundent codes
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Move to more generic tracing hooks that can be implemented in different
ways and do not interfere with the kernel.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The benchmark application timing_info needs certain hooks to be
present in the kernel to get the accurate measurements. This
patch adds these hook at all the required locations.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
This enables reserving little space on the top of stack to store
data local to thread when CONFIG_USERSPACE. The first customer
of this is errno.
Note that ARC, due to how it lays out the user stack and
privilege stack, sets the pointer itself rather than
relying on the common way.
Fixes: #9067
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
irq_lock returns an unsigned int, though, several places was using
signed int. This commit fix this behaviour.
In order to avoid this error happens again, a coccinelle script was
added and can be used to check violations.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
There exist two symbols that became equivalent when PR #9383 was
merged; _SYSCALL_LIMIT and K_SYSCALL_LIMIT. This patch deprecates the
redundant _SYSCALL_LIMIT symbol.
_SYSCALL_LIMIT was initally introduced because before PR #9383 was
merged K_SYSCALL_LIMIT was an enum, which couldn't be included into
assembly files. PR #9383 converted it into a define, which can be
included into assembly files, making _SYSCALL_LIMIT redundant.
Likewise for _SYSCALL_BAD.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Consistently use
config FOO
bool/int/hex/string "Prompt text"
instead of
config FOO
bool/int/hex/string
prompt "Prompt text"
(...and a bunch of other variations that e.g. swapped the order of the
type and the 'prompt', or put other properties between them).
The shorthand is fully equivalent to using 'prompt'. It saves lines and
avoids tricking people into thinking there is some semantic difference.
Most of the grunt work was done by a modified version of
https://unix.stackexchange.com/questions/26284/how-can-i-use-sed-to-replace-a-multi-line-string/26290#26290, but some
of the rarer variations had to be converted manually.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
A design flaw of 'gsource' is that there's no way to require at least
one file to match the glob pattern. This could lead to silent errors.
Switch to a new design, where a plain 'source' is globbing and requires
at least one file to match. A separate 'osource' (optional source)
statement is available for cases where it's okay for a pattern (or plain
filename) to not match any files.
'orsource' combines 'osource' and 'rsource' (relative source).
This commit search-replaces 'gsource' with 'source', but backwards
compatibility with 'gsource' is still maintained by making it an alias
for 'osource' (and by making 'grsource' an alias for 'orsource').
The three Kconfig files arch/{nios2,posix,xtensa}/Kconfig source
arch/{nios2,posix,xtensa}/soc/*/Kconfig, which doesn't match any files.
Use 'osource' for those. The soc/*/Kconfig files seem to be for
additional SoC-specific symbols, only none exist yet on those ARCHes.
Also use 'osource' for the source of $ENV_VAR_BOARD_DIR/Kconfig in
boards/Kconfig, which doesn't exist for all boards.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Up until now, Zephyr has patched Kconfig to use the last 'default' with
a satisfied condition, instead of the first one. I'm not sure why the
patch was added (it predates Kconfiglib), but I suspect it's related to
Kconfig.defconfig files.
There are at least three problems with the patch:
1. It's inconsistent with how Kconfig works in other projects, which
might confuse newcomers.
2. Due to oversights, earlier 'range' properties are still preferred,
as well as earlier 'default' properties on choices.
In addition to being inconsistent, this makes it impossible to
override 'range' properties and choice 'default' properties if the
base definition of the symbol/choice already has 'range'/'default'
properties.
I've seen errors caused by the inconsistency, and I suspect there
are more.
3. A fork of Kconfiglib that adds the patch needs to be maintained.
Get rid of the patch and go back to standard Kconfig behavior, as
follows:
1. Include the Kconfig.defconfig files first instead of last in
Kconfig.zephyr.
2. Include boards/Kconfig and arch/<arch>/Kconfig first instead of
last in arch/Kconfig.
3. Include arch/<arch>/soc/*/Kconfig first instead of last in
arch/<arch>/Kconfig.
4. Swap a few other 'source's to preserve behavior for some scattered
symbols with multiple definitions.
Swap 'source's in some no-op cases too, where it might match the
intent.
5. Reverse the defaults on symbol definitions that have more than one
default.
Skip defaults that are mutually exclusive, e.g. where each default
has an 'if <some board>' condition. They are already safe.
6. Remove the prefer-later-defaults patch from Kconfiglib.
Testing was done with a Python script that lists all Kconfig
symbols/choices with multiple defaults, along with a whitelist of fixed
symbols. The script also verifies that there are no "unreachable"
defaults hidden by defaults without conditions
As an additional test, zephyr/.config was generated before and after the
change for several samples and checked to be identical (after sorting).
This commit includes some default-related cleanups as well:
- Simplify some symbol definitions, e.g. where a default has 'if FOO'
when the symbol already has 'depends on FOO'.
- Remove some redundant 'default ""' for string symbols. This is the
implicit default.
Piggyback fixes for swapped ranges on BT_L2CAP_RX_MTU and
BT_L2CAP_TX_MTU (caused by confusing inconsistency).
Piggyback some fixes for style nits too, e.g. unindented help texts.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This code path for returning from an exception wasn't
updating ERET with ESF->pc, resulting in any updates to
the PC by the fault handler being ignored.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Fixed the RTC interrupt masking issue on Deep Sleep entry by
explicitly unmasking it on Deep Sleep exit sequence.
Re-oredered the SoC power states such that SYS_POWER_STATE_CPU_LPS is
the lowest possible Low Power State(LPS) and SYS_POWER_STATE_CPU_LPS_2
is the highest possible Low Power State(LPS). This is need to maintain
the LPS state consistency across different architectures.
Also re-mapped the Low Power States and Deep Sleep States as per
Quark SE C1000 data sheet document under Power Management section.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
add nsim soc support, two configs are contained
* em with arc MPUv2
* em with arc SecureShield and MPUv3
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
The entry point can and therefore should be set by linker
scripts. Whenever possible one should express things in the source
language, be it .c or .ld, and not in code generators or in the build
system.
This patch removes the flag -eCONFIG_KERNEL_ENTRY from the linker's
command line and replaces it with the linker script command
ENTRY(CONFIG_KERNEL_ENTRY)
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though.
Also fix the 'default' on XIP. Due to Zephyr's prefer-later-defaults
behavior, it was always set to 'y' (when the dependencies were
satisfied).
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Both variables were used (with the same value) interchangeably
throughout CMake files and per the discussion in GH issue,
ZEPHYR_BASE is preferred.
Also add a comment with explanation of one vs. the other.
Tested by building hello_world for several boards ensuring no errors.
Fixes#7173.
Signed-off-by: Alex Tereschenko <alext.mkrs@gmail.com>
This symbol was removed by commit 17c6456678 ("drivers/uart: Use dts
to set uart priorities for QMSI driver"). The setting should come from
DTS now.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The NSIM symbol was removed in commit 9bc69a46fa ("boards: Update arc
em_starterkit support from 2.2 to 2.3").
Guess that UART_NSIM should be used here now, similar to what was done
in commit 45221a9706 ("serial: nsim: Fix impossible-to-enable
CONFIG_UART_NSIM").
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
* re-use top of isr stack as exception stack
* bug fixes in irq offload's implementation
* improve kernel oops implementation
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
This commit improves the reset of arc:
* make the processor in the correct status
* clear interrupt related regs
this may improve or fix#6515
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Whether it should hang the system it not decided finally.
But remove it here to let some tests pass.
Fixes#8032
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
* use a separate stack for exception handling, this
will gurantee the exception handling always work, not
affected by some speical cases, e.g., stack check exception
or mem. protection exception at the exception entry.
* this commit can fix the second case of #8092
* note: the thread switch is still possible in exception
handling, e.g, caused by thread_abort. But the switched out
thread cannot be recovered, as the thread context is not
setup.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
The original implementation of CONFIG_THREAD_MONITOR would
try to leverage a thread's initial stack layout to provide
the entry function with arguments for any given thread.
This is problematic:
- Some arches do not have a initial stack layout suitable for
this
- Some arches never enabled this at all (riscv32, nios2)
- Some arches did not enable this properly
- Dropping to user mode would erase or provide incorrect
information.
Just spend a few extra bytes to store this stuff directly
in the k_thread struct and get rid of all the arch-specific
code for this.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
ARC has only 2 priorities, 0 or 1. So let's set the right priority for
WDT.
It looks like some commit has changed that, somewhere. And wrong
priorities were lurking around.
Fixes#8096
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
* the original stack check codes have no consideration
for userspace case. This will wrong cause possible stack
check exception.
* this commit refactors the arc stack check support to
support the usperspace.
* this commit fixes#7885. All the failed tests in #7885
are run again to verify this commit. The test results are ok
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
For user thread, the stack check parameters will cover both
user stack part and privilege stack part. Because in arc, they
are in the same array.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Previously the directory core/mpu/ was getting included on a hidden
kconfig. Now this has been replaced with the Kconfig
CONFIG_ARC_CORE_MPU.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
soc.h had defines for CONFIG_ARCV2_TIMER1_INT_{LVL,PRI}. These defines
are both not used and no Kconfig symbols so lets remove them.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
In preparation for introducing a warning.
Unquoted string defaults work through a quirk of Kconfig (undefined
symbols get their name as their string value), but look confusing. It's
done inconsistently now too.
Suggested by Kumar Gala.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The metairq feature exposed the fact that all of our arch code (and a
few mistaken spots in the scheduler too) was trying to interpret
"preemptible" threads independently.
As of the scheduler rewrite, that logic is entirely within sched.c and
doing it externally is redundant. And now that "cooperative" threads
can be preempted, it's wrong and produces test failures when used with
metairq threads.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
* blink, fp should not be always cleared
* clean up code format
* use a better way to save and restore ER_SEC_STAT
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
* current codes use a faked interrupt return to do a thread switch
in exception return.
* so the different between exception return and interrupt return
should be carefully considered.
* when secure is enabled, the sec_stat should also be pushed in
exception entry.
* when secure is enabled, SEC_STAT.IRM must be configured corrrectly
for interrupt return.
* For the case of faked interrupt return in exception return, the
correct value of SEC_STAT.IRM comes from ER_SEC_STAT.ERM.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Fix the qmsi i2c driver and the relevant SoCs accordingly.
Also applying relevant changes on quark_se_c1000_ss as it can use i2c
qmsi driver as well along with qmsi ss i2c driver.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Fix the ns16550 uart driver and relevant SoCs accordingly.
All generic settings are now DTS based.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Fix the qmsi uart driver and relevant SoCs accordingly.
Also: using config for irq everwhere relevantly and not an hardcoded
value in the driver.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Get the name generated through dts as well.
Fix the rtc driver and relevant SoCs accordingly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Normally a syscall would check the current privilege level and then
decide to go to _impl_<syscall> directly or go through a
_handler_<syscall>.
__ZEPHYR_SUPERVISOR__ is a compiler optimization flag which will
make all the system calls from the arch files directly link
to the _impl_<syscall>. Thereby reducing the overhead of checking the
privileges.
In the previous implementation all the source files would be compiled
by zephyr_source() rule. This means that zephyr_* is a catchall CMake
library for source files that can be built purely with the include
paths, defines, and other compiler flags that all zephyr source
files uses. This states that adding one extra compiler flag for only
one complete directory would fail.
This limitation can be overcome by using zephyr_libray* APIs. This
creates a library for the required directories and it also supports
directory level properties.
Hence we use zephyr_library* to create a new library with
macro _ZEPHYR_SUPERVISOR_ for the optimization.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
it seems regular expresssion is not supported in "source xxx" after
latest changes in build system.
So explictly list all def config
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
* add gpio, i2c, spi definitions
* optimize and bug fix the dts.fixup
* optimize and bug fix the em_starterkit related definitions
in dts folder
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
The original em7d, em9d and em11d are different configurations of
em_starterkit. They have the same peripherals, e.g. uart, spi, gpio
, ddr. The differences of them are in arc core configurations, interrupt
number assignment.
So em7d, em9d and em11d can be viewed in the same SoC family or SoC
series.
Referring other arch's implementation, this commit merges em7d, em9d
and em11d into the same SoC, named snps_emsk. This will eliminate
unnecessary duplication and make it easier for future maintainment.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Until now, Zephyr has used a patched Kconfiglib that turns 'source' into
a globbing source (by replacing 'source' with 'gsource' at the token
level). There's two problems with this:
- The patch needs to be maintained separately
- Misspelled filenames are silently ignored, as they look like glob
patterns that don't match anything
Fix it as follows:
1. Replace all 'source' statements that use wildcards with 'gsource'
2. Remove the custom Kconfiglib patch so that 'source' no longer globs
The sed pattern '/source.*[*?]/s/source/gsource/' was run over all
Kconfig* files to do the replacement.
source's that use environment variables that might contain glob patterns
were manually changed to gsource.
Building the docs in doc/ is a good test, as doc/Makefile deliberately
sets the environment variables to glob up as many Kconfig files as
possible.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
* call the _check_stack_sentinel in unnested isr
return.
* for firq, _check_stack_sentinel is called in kernel
isr stack because the limitation of banked register
* for normal irq, _check_stak_sentinel is called in
the interruptted thread stack
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
* For STACK_CANERY, the processor should not hang
* as _SysFatalErrorHandler is always executed in
isr context, so remove k_is_in_isr
* the function should return after k_thread_abort
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
The original exception handling has space to optimize and
and some bugs need to be fixed.
* define NANO_ESF
* add the definition of NANO_ESF which is an irq_stack_frame
* add the corresponding codes in exception entry and handler
* remove _default_esf
* implement the _ARCH_EXCEPT
* use trap exception to raise exception by kernel
* add corresponding trap exception entry
* add _do_kernel_oops to handle the exception raised by
_ARCH_EXCEPT.
* add the thread context switch in exception return
* case: kernel oops may raise thread context switch
* case: some tests will re-implement SysFatalHandler to raise
thread context switch.
* as the exception and isr are handled in kernel isr stack, so
the thread context switch must be in the return of exception/isr
, and the exception handler must return, should not be decorated
with FUNC_NORETURN
* for arc, _is_in_isr should consider the case of exception
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Add support for getting some basic params from the DTS for the UART.
The ns16550 driver still needs to be updated to get IRQ and address
info from DTS.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Now that all ARC SoCs we can remove code associated with !HAS_DTS and
select HAS_DTS at the architecture level.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add initial device tree support for the em{7,9,11}d SoC and associated
em_starterkit boards. The device tree at this point specifies cpu core,
memory, interrupt controller, uart's and i2c controllers.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Now that dts i2 qmsi ss nodes generate the right options, let's use
them. Apply the relevant fixup on the targeted SoC.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The DCCM_SIZE is defined in terms of K, not bytes, so we need to adjust
it from bytes (generated from dts) to K (used by e CONFIG_DCCM_SIZE).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
* the bug comes out when a context switch happens in interrupt
* the bug only affects the em7d in emsk 2.3
* the bug is caused by
* wrong operations of stack
* wrong setting of SEC_STAT's IRM bit
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Move common SoC dts.fixup defines into
arch/arc/soc/quark_se_c1000_ss/dts.fixup so we remove duplication in the
boards and only have board specific defines in
boards/arc/<FOO>/dts.fixup.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The new thread stack layout is as follow:
|---------------------|
| user stack |
|---------------------|
| stack guard (opt.) |
|---------------------|
| privilege stack |
-----------------------
For MPUv2
* user stack is aligned to the power of 2 of user stack size
* the stack guard is 2048 bytes
* the default size of privileg stack is 256 bytes.
For user thread, the following MPU regions are needded
* one region for user stack, no need of stack guard for user stack
* one region for stack guard when stack guard is enbaled
* regions for memory domain.
For kernel thread, the stack guard region will be at the top, adn
The user stack and privilege stack will be merged.
MPUv3 is the same as V2's layout, except no need of power of 2
alignment.
* reimplement the user mode enter function. Now it's possible for
kernel thread to drop privileg to user thread.
* add a separate entry for user thread
* bug fixes in the cleanup of regs when go to user mode
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
when USERSPACE is enabled, exception is handled in the privilege
stack of thread. This make thread context switch is possible in the
exception handler. For some case,e.g. tests, this is useful.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
disable the U bit of irq.ctrl, so the user thread's context will
be saved into privilege stack when interrupts/exception come.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
scrub all the regs of kernel context before returnning to userspace.
For sys call, ro is not cleared as it's a return value of sys call.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Enable us bit to check user mode more efficienly.
US is read as zero in user mode. This will allow use mode sleep
instructions, and it enables a form of denial-of-service attack
by putting the processor in sleep mode, but since interrupt
level/mask can't be set from user space that's not worse than
executing a loop without yielding.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
* user space support requires THREAD_INFO
* for MPU version 2, the stack align is at least 2048 bytes
* the smallest mpu region is 2048 bytes
* the region size must bt power of 2
* the start address of region must be aligned to the region size
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
* add the implementation of syscall
* based on 'trap_s' intruction, id = 3
* add the privilege stack
* the privilege stack is allocted with thread stack
* for the kernel thread, the privilege stack is also a
part of thread stack, the start of stack can be configured
as stack guard
* for the user thread, no stack guard, when the user stack is
overflow, it will fall into kernel memory area which requires
kernel privilege, privilege violation will be raised
* modify the linker template and add MPU_ADDR_ALIGN
* add user space corresponding codes in mpu
* the user sp aux reg will be part of thread context
* When user thread is interruptted for the 1st time, the context is
saved in user stack (U bit of IRQ_CTLR is set to 1). When nest
interrupt comes, the context is saved in thread's privilege stack
* the arc_mpu_regions.c is moved to board folder, as it's board
specific
* the above codes have been tested through tests/kernel/mem_protect/
userspace for MPU version 2
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Rename the nano_internal.h to kernel_internal.h and modify the
header file name accordingly wherever it is used.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Refering the ARM's implementation, the initial support of memory
domain in ARC is added:
* changes in MPU drivers
* changes in Kconfig
* codes to configure memory domain during thread swap
* changes in linker script template
* memory domain related macro definitions
the commited codes are simply tested through
samples/mpu/mem_domain_apis_test.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
MPU version 3 is included in em7d of em_starterkit 2.3.
The differences of MPU version 3 and version 2 are:
* different aux reg interface
* The address alignment requirement is 32 bytes
* supports secure mode
* supports SID (option)
* does not support memory region overlap
This commit adds the support MPU version 3 and also make some changes to
MPU version 2 to have an unified interface.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
* em7d of em_starterkit 2.3 supports secure mode. add the support
in kconfig and build system.
* change the default configuration of em_starterkit 2.3 to em7d
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
In ARC's SecureShield, a new secure mode (currently only em) is added.
The secure/normal mode is orthogonal to kernel/user mode. The
differences between secure mode and normal mode are following:
* different irq stack frame. so need to change the definition of
_irq_stack_frame, assembly code.
* new aux regs, e.g, secure status(SEC_STAT), secure vector base
(VECT_BASE_S)
* interrupts and exceptions, secure mode has its own vector base;
interrupt can be configured as secure or normal through the
interrupt priority aux reg.
* secure timers. Two secure timers (secure timer 0 and timer 1) are
added.Here, for simplicity and backwards compatibility original
internal timers (timer 0 and timer1) are used as sys clock of zephyr
* on reset, the processor is in secure mode and secure vector base is
used.
Note: the mix of secure and normal mode is not supported, i.e. it's
assumed that the processor is always in secure mode.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Add FIRQ option and change the _isr_wrapper. Currently, firq is
enabled by default, but in some arc configuration, firq can be
disabled.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
When CONFIG_X86_MMU is enabled for arduino 101 the start address
should be aligned to 4kB. If not aligned the page tables would not
be created and the build fails.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Introducing CMake is an important step in a larger effort to make
Zephyr easy to use for application developers working on different
platforms with different development environment needs.
Simplified, this change retains Kconfig as-is, and replaces all
Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild
offers is replaced by a set of CMake extentions. These extentions have
either provided simple one-to-one translations of KBuild features or
introduced new concepts that replace KBuild concepts.
This is a breaking change for existing test infrastructure and build
scripts that are maintained out-of-tree. But for FW itself, no porting
should be necessary.
For users that just want to continue their work with minimal
disruption the following should suffice:
Install CMake 3.8.2+
Port any out-of-tree Makefiles to CMake.
Learn the absolute minimum about the new command line interface:
$ cd samples/hello_world
$ mkdir build && cd build
$ cmake -DBOARD=nrf52_pca10040 ..
$ cd build
$ make
PR: zephyrproject-rtos#4692
docs: http://docs.zephyrproject.org/getting_started/getting_started.html
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
Some "random" drivers are not drivers at all: they just implement the
function `sys_rand32_get()`. Move those to a random subsystem in
preparation for a reorganization.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Currently this is defined as a k_thread_stack_t pointer.
However this isn't correct, stacks are defined as arrays. Extern
references to k_thread_stack_t doesn't work properly as the compiler
treats it as a pointer to the stack array and not the array itself.
Declaring as an unsized array of k_thread_stack_t doesn't work
well either. The least amount of confusion is to leave out the
pointer/array status completely, use pointers for function prototypes,
and define K_THREAD_STACK_EXTERN() to properly create an extern
reference.
The definitions for all functions and struct that use
k_thread_stack_t need to be updated, but code that uses them should
be unchanged.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
In various places, a private _thread_entry_t, or the full prototype
were being used. Be consistent and use the same typedef everywhere.
Signen-off-by: Andrew Boie <andrew.p.boie@intel.com>
Indenting preprocessor directives reduces the code readability, because
it make preprocessor directives harder to spot.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Previously, this was only done if an essential thread self-exited,
and was a runtime check that generated a kernel panic.
Now if any thread has k_thread_abort() called on it, and that thread
is essential to the system operation, this check is made. It is now
an assertion.
_NANO_ERR_INVALID_TASK_EXIT checks and printouts removed since this
is now an assertion.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
* apply STACK_GUARD_SIZE, no extra space will be added if
MPU_STACK_GUARD is disabled
* When ARC_STACK_CHECKING is enabled, MPU_STACK_GUARD will be
disabled
* add two new api: arc_core_mpu_default and arc_core_mpu_region
to configure mpu regions
* improve arc_core_mpu_enable and arc_core_mpu_disable
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
* add arc mpu driver
* modify the corresponding kconfig and kbuild
* currently only em_starterkit 2.2's em7d configuration
has mpu feature (mpu version 2)
* as the minimum region size of arc mpu version 2 is 2048 bytes and
region size should be power of 2, the stack size of threads
(including main thread and idle thread) should be at least
2048 bytes and power of 2
* for mpu stack guard feature, a stack guard region of 2048 bytes
is generated. This brings more memory footprint
* For arc mpu version 3, the minimum region size is 32 bytes.
* the codes are tested by the mpu_stack_guard_test and stackprot
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
* add nested interrupt support for interrupts
+ use a varibale exc_nest_count to trace nest interrupt and exception
+ regular interrupts can be nested by regular interrupts and fast
interrupts
+ fast interrupt's priority is the highest, cannot be nested
* remove the firq stack and exception stack
+ remove the coressponding kconfig option
+ all interrupts (normal and fast) and exceptions will be handled
in the same stack (_interrupt stack)
+ the pros are, smaller memory footprint (no firq stack), simpler
stack management, simpler codes, etc.. The cons are, possible
10-15 instructions overhead for the case where fast irq nests
regular irq
* add the case of ARC in test/kernel/gen_isr_table
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When you build application for em starterkit 2.3 em7d, it will
report error during build since it is not supported currently.
Signed-off-by: Huaqi Fang <huaqi.fang@synopsys.com>
em starterkit has two versions, 2.2 and 2.3.
Change soc.h to support both versions,
main changes are the interrupt connections.
Signed-off-by: Huaqi Fang <huaqi.fang@synopsys.com>
Since em starterkit has different firmware versions(2.2 and 2.3),
but the EM7D of 2.3 has new secureshield feature, which is not supported
in Zephyr, but EM7D of 2.2 is a normal EM core, which can be supported,
so we add support for 2.2 EM7D.
Signed-off-by: Huaqi Fang <huaqi.fang@synopsys.com>
The API name space for Bluetooth is bt_* and BT_* so it makes sense to
align the Kconfig name space with this. The additional benefit is that
this also makes the names shorter. It is also in line with what Linux
uses for Bluetooth Kconfig entries.
Some Bluetooth-related Networking Kconfig defines are renamed as well
in order to be consistent, such as NET_L2_BLUETOOTH.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Historically, stacks were just character buffers and could be treated
as such if the user wanted to look inside the stack data, and also
declared as an array of the desired stack size.
This is no longer the case. Certain architectures will create a memory
region much larger to account for MPU/MMU guard pages. Unfortunately,
the kernel interfaces treat both the declared stack, and the valid
stack buffer within it as the same char * data type, even though these
absolutely cannot be used interchangeably.
We introduce an opaque k_thread_stack_t which gets instantiated by
K_THREAD_STACK_DECLARE(), this is no longer treated by the compiler
as a character pointer, even though it really is.
To access the real stack buffer within, the result of
K_THREAD_STACK_BUFFER() can be used, which will return a char * type.
This should catch a bunch of programming mistakes at build time:
- Declaring a character array outside of K_THREAD_STACK_DECLARE() and
passing it to K_THREAD_CREATE
- Directly examining the stack created by K_THREAD_STACK_DECLARE()
which is not actually the memory desired and may trigger a CPU
exception
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The .balign directives were not working correctly in their
previous positions as the directive was applying to the section
before the variable's section, causing in some builds the
variables to be misaligned, and accesses to them causing faults.
With the alignments after the section declaration, the variables
will now be aligned as specified. Any future variable declarations
should use this form instead to ensure proper alignment.
Signed-off-by: Michael R Rosen <michael.r.rosen@intel.com>
Here are the main changes:
* board: Update EMSK onboard resources such as Button, Switch and LEDs
+ update soc.h for em7d, em9d, em11d
+ update board.h for em_starterkit board
* arc: Add floating point support and code density support
+ add kconfig configuration
+ add compiler options
+ add register definitions, marcos, assembly codes
+ fixes in existing codes and configurations.
* arc: Update detailed board configurations for cores of emsk 2.3
* script: Provide arc_debugger.sh for debugging em_starterkit board
+ make BOARD=em_starterkit debug
This will start openocd server for emsk, and arc gdb will connect
to this debug server, user can run `continue` command if user just
want to run the application, or other commands if debugging needed.
+ make BOARD=em_starterkit debugserver
This will start an openocd debugger server for emsk, and user can
connect to this debugserver using arc gdb and do what they want to.
+ make BOARD=em_starterkit flash
This will download the zephyr application elf file to emsk,
and run it.
Signed-off-by: Huaqi Fang <huaqi.fang@synopsys.com>
- There's no clear need to disable frame pointers if this feature is
used, remove this directive.
- The 'top' and 'base' terms are reversed. The 'base' is the high
address of the stack. The top is the lowest address, where we cannot
push further down. Fixup member and offset names to correspond to how
these terms are used in hardware documentation.
- Use correct pointers for stack top location
- Fatal exceptions now go through _NanoFatalErrorHandler to report the
faulting ip and thread.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Unline k_thread_spawn(), the struct k_thread can live anywhere and not
in the thread's stack region. This will be useful for memory protection
scenarios where private kernel structures for a thread are not
accessible by that thread, or we want to allow the thread to use all the
stack space we gave it.
This requires a change to the internal _new_thread() API as we need to
provide a separate pointer for the k_thread.
By default, we still create internal threads with the k_thread in stack
memory. Forthcoming patches will change this, but we first need to make
it easier to define k_thread memory of variable size depending on
whether we need to store coprocessor state or not.
Change-Id: I533bbcf317833ba67a771b356b6bbc6596bf60f5
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Adds event based scheduling logic to the kernel. Updates
management of timeouts, timers, idling etc. based on
time tracked at events rather than periodic ticks. Provides
interfaces for timers to announce and get next timer expiry
based on kernel scheduling decisions involving time slicing
of threads, timeouts and idling. Uses wall time units instead
of ticks in all scheduling activities.
The implementation involves changes in the following areas
1. Management of time in wall units like ms/us instead of ticks
The existing implementation already had an option to configure
number of ticks in a second. The new implementation builds on
top of that feature and provides option to set the size of the
scheduling granurality to mili seconds or micro seconds. This
allows most of the current implementation to be reused. Due to
this re-use and co-existence with tick based kernel, the names
of variables may contain the word "tick". However, in the
tickless kernel implementation, it represents the currently
configured time unit, which would be be mili seconds or
micro seconds. The APIs that take time as a parameter are not
impacted and they continue to pass time in mili seconds.
2. Timers would not be programmed in periodic mode
generating ticks. Instead they would be programmed in one
shot mode to generate events at the time the kernel scheduler
needs to gain control for its scheduling activities like
timers, timeouts, time slicing, idling etc.
3. The scheduler provides interfaces that the timer drivers
use to announce elapsed time and get the next time the scheduler
needs a timer event. It is possible that the scheduler may not
need another timer event, in which case the system would wait
for a non-timer event to wake it up if it is idling.
4. New APIs are defined to be implemented by timer drivers. Also
they need to handler timer events differently. These changes
have been done in the HPET timer driver. In future other timers
that support tickles kernel should implement these APIs as well.
These APIs are to re-program the timer, update and announce
elapsed time.
5. Philosopher and timer_api applications have been enabled to
test tickless kernel. Separate configuration files are created
which define the necessary CONFIG flags. Run these apps using
following command
make pristine && make BOARD=qemu_x86 CONF_FILE=prj_tickless.conf qemu
Jira: ZEP-339 ZEP-1946 ZEP-948
Change-Id: I7d950c31bf1ff929a9066fad42c2f0559a2e5983
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Future tickless kernel patches would be inserting some
code before call to Swap. To enable this it will create
a mcro named as the current _Swap which would call first
the tickless kernel code and then call the real __swap()
Jira: ZEP-339
Change-Id: Id778bfcee4f88982c958fcf22d7f04deb4bd572f
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Historically, space for struct k_thread was always carved out of the
thread's stack region. However, we want more control on where this data
will reside; in memory protection scenarios the stack may only be used
for actual stack data and nothing else.
On some platforms (particularly ARM), including kernel_arch_data.h from
the toplevel kernel.h exposes intractable circular dependency issues.
We create a new per-arch header "kernel_arch_thread.h" with very limited
scope; it only defines the three data structures necessary to instantiate
the arch-specific bits of a struct k_thread.
Change-Id: I3a55b4ed4270512e58cf671f327bb033ad7f4a4f
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Unlike assertions, these APIs are active at all times. The kernel will
treat these errors in the same way as fatal CPU exceptions. Ultimately,
the policy of what to do with these errors is implemented in
_SysFatalErrorHandler.
If the archtecture supports it, a real CPU exception can be triggered
which will provide a complete register dump and PC value when the
problem occurs. This will provide more helpful information than a fake
exception stack frame (_default_esf) passed to the arch-specific exception
handling code.
Issue: ZEP-843
Change-Id: I8f136905c05bb84772e1c5ed53b8e920d24eb6fd
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We do the same thing on all arch's right now for thread_monitor_init so
lets put it in a common place. This also should fix an issue on xtensa
when thread monitor can be enabled (reference to _nanokernel.threads).
Change-Id: If2f26c1578aa1f18565a530de4880ae7bd5a0da2
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We do a bit of the same stuff on all the arch's to setup a new thread.
So lets put that code in a common place so we unify it for everyone and
reduce some duplicated code.
Change-Id: Ic04121bfd6846aece16aa7ffd4382bdcdb6136e3
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
There are a few places that we used an naked unsigned type, lets be
explicit and make it 'unsigned int'.
Change-Id: I33fcbdec4a6a1c0b1a2defb9a5844d282d02d80e
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types. This handles the remaining includes and kernel, plus
touching up various points that we skipped because of include
dependancies. We also convert the PRI printf formatters in the arch
code over to normal formatters.
Jira: ZEP-2051
Change-Id: Iecbb12601a3ee4ea936fd7ddea37788a645b08b0
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types. There are few places we dont convert over to the new
types because of compatiability with ext/HALs or for ease of transition
at this point. Fixup a few of the PRI formatters so we build with newlib.
Jira: ZEP-2051
Change-Id: I7d2d3697cad04f20aaa8f6e77228f502cd9c8286
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This is a start to move away from the C99 {u}int{8,16,32,64}_t types to
Zephyr defined u{8,16,32,64}_t and s{8,16,32,64}_t. This allows Zephyr
to define the sized types in a consistent manor across all the
architectures we support and not conflict with what various compilers
and libc might do with regards to the C99 types.
We introduce <zephyr/types.h> as part of this and have it include
<stdint.h> for now until we transition all the code away from the C99
types.
We go with u{8,16,32,64}_t and s{8,16,32,64}_t as there are some
existing variables defined u8 & u16 as well as to be consistent with
Zephyr naming conventions.
Jira: ZEP-2051
Change-Id: I451fed0623b029d65866622e478225dfab2c0ca8
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Fix doxygen comment typos used to generate API docs
Change-Id: I94df2e3a2bda248824ed2aeff3dd0eb743f0bf3e
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
CONFIG_* usually come from Kconfig, rename variables that are locally
defined to avoid confusion about where they are set.
Change-Id: I83b8459913c5deb68dc1b9f5386b8934363a6d1f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
I2C_CLOCK_SPEED Kconfig option is DW driver specific. It does not
define I2C interface speed but rather the I2C DW module clock speed.
It is confusing for a user of any other I2C driver than DW.
This patch renames this option to I2C_DW_CLOCK_SPEED and makes it
visible only for DW I2C driver.
Change-Id: I97f57332fd5cca644eabdef0968a0b2174b885ff
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Fix c6e27a05 was too aggressive. It turns out that bluetooth on the
Quark SE boards won't enable it's own UART, because it had always been
enabled. Apps that don't do it already will be broken.
Enable UART_QMSI_0 whenever BLUETOOTH_H4 is pulled in on this
platform.
Change-Id: I5e21c6004714adba8fb0fafa056dc2d62698a3d1
Issue: ZEP-1788
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The defconfigs would always create a device for UART 0, which is
problematic in circumstances where both the x86 and ARC cores are
alive and one wants to use it in a non-default configuration.
Specifically: on Arduino 101 this is the bluetooth device and it
operates at 1MBps instead of of 115200kbps. If an x86 app sets this
up correctly, but then starts the ARC core running an app which
doesn't reference this UART at all, the device will still exist and
set up the (wrong!) configuration, clobbering the correct settings.
Just remove the "def-bool y" bits from the defconfig. There's no
need, users of these devices (e.g. the console) will enable them
anyway. There's no value to compiling it in without a configured
user.
Issue: ZEP-1677
Change-Id: I4a0e944f23705495433e9f3d0459065f131579cb
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This implementation of _tsc_read returns a 64-bit value that
is derived from the 64-bit tick count multiplied by hwcycles per tick,
and then it adds the current value from the 32-bit timer.
This produces a 64-bit time. There is a bunch of math here, which
could be avoided if the CPU is built with Real-Time-Clock option.
EM Starter Kit SOCs don't have this. I don't think Arduino 101 does
either.
See ZEP-1559
Change-Id: I9f846d170246556ac40fe2f45809e457c6375d8c
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
This commit removes the local implementation of enter_arc_state, where
the ARC is instructed to sleep, using instead the QMSI 1.4 functions.
Change-Id: Id489ad53851be50fc5e50add698891fcfaef3abe
Signed-off-by: Juan Solano <juanx.solano.menacho@intel.com>
This flag is no longer necessary and TICKLESS_IDLE will be
enabled by default if SYS_POWER_MANAGEMENT is enabled.
Jira: ZEP-1325
Change-Id: Ic6cd4b8dc0a17c6a413cabf6509b215a4558318d
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Update the builtin QMSI code to 1.4 (RC2).
The below shim drivers were updated for API or interface changes:
- aio
- counter
- i2c_ss
- rtc
- wdt.
Also, arch soc specific power management code were updated.
Jira: ZEP-1572
Change-Id: Ibc8fae032a39ffb2c2c997f697835bc0208fd308
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Signed-off-by: Kuo-Lang Tseng <kuo-lang.tseng@intel.com>
Rename devices. For example, the two i2c devices in the
quark se sensor sub-system will have name string "I2C_0"
and "I2C_1", while the other two i2c devices accessible to
both x86 and arc will have name string "I2C_2" and "I2C_3".
This is valid only when you build arc binary.
It does not apply if you build x86 or arm binary. Similar change is
also made for GPIO and SPI.
Jira: ZEP-1588 ZEP-1614
Change-Id: Ibad4486e70e0aaf287763514a5a9d28b43bca094
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
This patch changes Quark SE power drivers to support multicore scenarios
e.g. both LMT and ARC core are enabled and manage power.
Handling LPS states in multicore scenarios are dead simple because LPS
states are core-specific states. It means that putting the LMT core in
LPS doesn't affect the ARC core, and vice-versa. DEEP_SLEEP state, on
the other hand, affects both cores since it turns power off from the SoC
and both cores are shutdown. It means that if LMT puts the system in
DEEP_SLEEP, ARC core is shutdown even if it is busy handling some task.
In order to support the multicore scenario, this patch introduces the
SYS_POWER_STATE_DEEP_SLEEP_2 state to both ARC and x86 power drivers.
On ARC, this state works as following:
1) Save ARC execution context;
2) Raise a flag to inform the x86 core that ARC is ready to enter in
DEEP_SLEEP;
3) Enter in the lowest core-specific power state, which in this case is
LPSS.
On x86, DEEP_SLEEP_2 is very similar to DEEP_SLEEP. The difference relies
in the post_ops() which calls _arc_init() in order to start ARC core so
it can restore its context.
This patch also adds the test/power/multicore/ directory which provides
sample application to x86 and ARC cores in order to easily verify the
multicore support. In test/power/multicore/README.rst you can find more
details regarding the applications.
Jira: ZEP-1103
Change-Id: Ie28ba6d193ea0e58fca69d38f8d3c38ca259a9ef
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This avoids asm files from having to explicitly define the _ASMLANGUAGE
symbol themselves.
Change-Id: I71f5a169f75d7443a58a0365a41c55b20dae3029
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
They are not part of the API, so rename from K_<state> to
_THREAD_<state>.
Change-Id: Iaebb7d3083b80b9769bee5616e0f96ed2abc5c56
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.
Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.
Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file. Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.
Jira: ZEP-1457
Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Force-align all variables defined via asm .word to ensure 4-byte
alignment.
The straddled_tick_on_idle_enter variable was a bool, which resolved in
an one-byte quantity. Changing it to a 32-bit integer. It would have
occupied 4 bytes anyway with alignment.
Fixes ZEP-1549.
Change-Id: If5e0aa1a75dbc73d896b44616f059d221fe191c6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
I've moved the call for icache_setup from nanoArchInit() to
_PrepC(), because there is a lot of code executed now before
nanoArchInit() is called, and all this time the i-cache would
be off. It should be turned on as early as possible to make
initialization faster.
Change-Id: I76a809d57a1bf9aacf51e7bb9fe8c8425f37aa13
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
These two fields in the thread structure control the preemptibility of a
thread.
sched_locked is decremented when the scheduler gets locked, which means
that the scheduler is locked for values 0xff to 0x01, since it can be
locked recursively. A thread is coop if its priority is negative, thus
if the prio field value is 0x80 to 0xff when looked at as an unsigned
value.
By putting them end-to-end, this means that a thread is non-preemptible
if the bundled value is greater than or equal to 0x0080. This is the
only thing the interrupt exit code has to check to decide to try a
reschedule or not.
Change-Id: I902d36c14859d0d7a951a6aa1bea164613821aca
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Some thread fields were 32-bit wide, when they are not even close to
using that full range of values. They are instead changed to 8-bit fields.
- prio can fit in one byte, limiting the priorities range to -128 to 127
- recursive scheduler locking can be limited to 255; a rollover results
most probably from a logic error
- flags are split into execution flags and thread states; 8 bits is
enough for each of them currently, with at worst two states and four
flags to spare (on x86, on other archs, there are six flags to spare)
Doing this saves 8 bytes per stack. It also sets up an incoming
enhancement when checking if the current thread is preemptible on
interrupt exit.
Change-Id: Ieb5321a5b99f99173b0605dd4a193c3bc7ddabf4
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This will allow for an enhancement when checking if the thread is
preemptible when exiting an interrupt.
Change-Id: If93ccd1916eacb5e02a4d15b259fb74f9800d6f4
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
GCC 6.x for ARC does not recognize the options
-mARCv2EM and -mav2em anymore.
Both options replaced in Makefile by -mcpu=quarkse_em.
Change-Id: I9dec26dd64b4738976704a39455fe4241406db9e
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
GCC 6.x for ARC does not recognize the options
-mARCv2EM and -mav2em anymore.
Both options replaced in Makefile by -mcpu=arcem.
Change-Id: Ic86bf51cd5fb1a67ba2cd75998cd907e26996347
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
This option has side effects. It also tells the compiler not to generate
these checks in the first place. The checks call abort() which doesn't
exist in our environment.
This patch gets rid of linker errors due to missing abort() in the 0.9 SDK.
Change-Id: Ibc5aeb5458d0bded714c9c074cdf08112733428b
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
replace include <nanokernel.h> with <kernel.h> everywhere and also fix
any remaining mentions of nanokernel.
Keep the legacy samples/tests as is.
Change-Id: Iac48447bd191e83f21a719c69dc26233216d08dc
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Enable arc to access the i2c controller on I/O fabric.
There are two i2c controllers on quark se SoC. One is attached
to the I/O fabric and the other one is in the sensor system.
X86 cpu is only able to access the i2c controller on the I/O
fabric and the access is supported by existing code. HW allows
arc to access both controllers. But, the existing code only
gives arc access to the controller in the sensor sub-system.
Let's grant arc the access to the controller on I/O fabric as
well by the following changes.
1. Add i2c_qmsi.c into arc compilation.
2. Use the already defined macros to choose interrupt numbers
and do interrupt unmasking automatically based on the
compilation targets.
3. Add new symbols in Kconfig including driver names for both
controllers
Jira: ZEP-1189
Change-Id: I317da6038c50e0c8bd16f446182c1f8bdf6d3ba2
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Enable arc to access the spi controller on I/O fabric.
There are two spi controllers on quark se SoC. One is attached
to the I/O fabric and the other one is in the sensor system.
X86 cpu is only able to access the spi controller on the I/O
fabric and the access is supported by existing code. HW allows
arc to access both controllers. But, the existing code only
gives arc access to the controller in the sensor sub-system.
Let's grant arc the access to the controller on I/O fabric as
well by the following changes.
1. Add spi_qmsi.c into arc compilation.
2. Use the already defined macros to choose interrupt numbers
and do interrupt unmasking automatically based on the
compilation targets.
3. Add new symbols in Kconfig including driver names for both
controllers
Jira: ZEP-1190
Change-Id: I40a5d423d4b7986a897834d1a3831938005eda6f
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
HW allows both arc and x86 to access the pwm attached to the
quark soc I/O fabric. The existing code only allows x86 to
do this. Let's give arc the access.
Change-Id: Ie88649fea41bf86b84876c260f97dd4c12fd0b81
Signed-off-by: Baohong liu <baohong.liu@intel.com>
Obsolete, replaced by _set_thread_return_value().
Change-Id: I23e9cfc07e43542f0965817edc3552d456fd2ef3
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Also remove mentions of unified kernel in various places in the kernel,
samples and documentation.
Change-Id: Ice43bc73badbe7e14bae40fd6f2a302f6528a77d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
rename NANOKERNEL_TICKLESS_IDLE_SUPPORTED to
TICKLESS_IDLE_SUPPORTED and remove nanokernel occurances in Kconfig
files.
Make TICKLESS_IDLE depend on hardware that supports it.
Change-Id: I6a2e4fb0f7cf4b45475b48e71823ea089ee98759
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Also remove some old cflags referencing directories that do not exist
anymore.
Also replace references to legacy APIs in doxygen documentation of
various functions.
Change-Id: I8fce3d1fe0f4defc44e6eb0ae09a4863e33a39db
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
And also remove now obsolete ARCH_HAS_TASK_ABORT.
ARC does not need the options either.
Change-Id: Ie52d63178a367ce12b911dacfe2d389f4f75ed2d
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
- does not pull in printk(), for potential footprint gain
- does not pull in k_thread_abort(), for single-threaded systems
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Ibc6a198b81a6cd73117d1e85aa05b92a4501a34d
Some kernel operations, like scheduler locking can be optmized out,
since coop threads lock the scheduler by their very nature. Also, the
interrupt exit path for all architecture does not have to do any
rescheduling, again by the nature of non-preemptible threads.
Change-Id: I270e926df3ce46e11d77270330f2f4b463971763
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
nano_cpu_idle/nano_cpu_atomic_idle were not ported to the unified
kernel, and only the old APIs were available. There was no real impact
since, in the unified kernel, only the idle thread should really be
doing power management. However, with a single-threaded kernel, these
functions can be useful again.
The kernel internals now make use of these APIs instead of the legacy
ones.
Change-Id: Ie8a6396ba378d3ddda27b8dd32fa4711bf53eb36
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The way the ready thread cache was implemented caused it to not always
be "hot", i.e. there could be some misses, which happened when the
cached thread was taken out of the ready queue. When that happened, it
was not replaced immediately, since doing so could mean that the
replacement might not run because the flow could be interrupted and
another thread could take its place. This was the more conservative
approach that insured that moving a thread to the cache would never be
wasted.
However, this caused two problems:
1. The cache could not be refilled until another thread context-switched
in, since there was no thread in the cache to compare priorities
against.
2. Interrupt exit code would always have to call into C to find what
thread to run when the current thread was not coop and did not have the
scheduler locked. Furthermore, it was possible for this code path to
encounter a cold cache and then it had to find out what thread to run
the long way.
To fix this, filling the cache is now more aggressive, i.e. the next
thread to put in the cache is found even in the case the current cached
thread is context-switched out. This ensures the interrupt exit code is
much faster on the slow path. In addition, since finding the next thread
to run is now always "get it from the cache", which is a simple fetch
from memory (_kernel.ready_q.cache), there is no need to call the more
complex C code.
On the ARM FRDM K64F board, this improvement is seen:
Before:
1- Measure time to switch from ISR back to interrupted task
switching time is 215 tcs = 1791 nsec
2- Measure time from ISR to executing a different task (rescheduled)
switch time is 315 tcs = 2625 nsec
After:
1- Measure time to switch from ISR back to interrupted task
switching time is 130 tcs = 1083 nsec
2- Measure time from ISR to executing a different task (rescheduled)
switch time is 225 tcs = 1875 nsec
These are the most dramatic improvements, but most of the numbers
generated by the latency_measure test are improved.
Fixes ZEP-1401.
Change-Id: I2eaac147048b1ec71a93bd0a285e743a39533973
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
When going into DEEP_SLEEP mode, the ARC core now saves
its context. This includes:
- All core registers
- Stack pointer
- Program counter (restored by jumping to the restore code)
The arc reset code now checks if the GPS0 bit 2 is set.
This is similar to the behavior of the x86 core done by
the QMSI bootloader which is setting GPS0 bit 1 in order
to call the restore path instead of cold boot path.
The sample has been adapted in order to support the ARC.
Jira: ZEP-1222
Change-Id: I375f03b16b8a5fd1f07ead55cf7e4947d6290c9f
Signed-off-by: Julien Delayen <julien.delayen@intel.com>
In order to resume the ARC from deep sleep,
the interrupts need to be restored.
The FIRQ stack needs to be saved and restored
when performing sleep operations.
During early initialization, the sp in the 2nd register bank
is made to refer to _firq_stack.
This allows for the FIRQ handler to use its own stack.
Fast Interrupts cannot be used after sleep if this information
is not restored.
This patch adds the suspend and resume functions.
Jira: ZEP-1223
Change-Id: Ic81980f05aee6c1f7b8c46c743f2648c65b29486
Signed-off-by: Julien Delayen <julien.delayen@intel.com>
Move interrupt initialization for the ARC to its own
device. The init function for the arc will be only
doing platform specific operations
Jira: ZEP-1288
Change-Id: Icb04c3622890021c65cd24cecf6cafee6c37caf9
Signed-off-by: Julien Delayen <julien.delayen@intel.com>
As flags are modified when entering sleep, add cc to
clobber list.
Jira: ZEP-1408
Change-Id: Ia80bc1c7ddedb9d9963c47108372a90928597c1d
Signed-off-by: Julien Delayen <julien.delayen@intel.com>
Memory access could be reorderd around sleep. Add memory
in clobber list.
Jira: ZEP-1408
Change-Id: I49df2542e0059ba76a262fbda58eb46b86e89bea
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
A build error was resulting if CONFIG_ARC_STACK_CHECKING is enabled.
There is a breq that was too far. Adding conditional code to
re-arrange the branching so that it can be done.
See ZEP-1116.
Change-Id: Idea85817b2e05617bbaa4450437aa74c5737e213
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Zephyr is always setting irqs to be level triggered as
required by the core. It is unnecessary to set it to
level again while entering sleep states.
Change-Id: I10f919d619af2e1ab05dc85a67766929b6ae9402
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Too much code might run with a stale icache, before _PrepC(), so move
the invalidation/disabling code earlier. The asm code does the exact
same thing disable_icache() and invalidate_dcache() were doing.
Change-Id: If52f4e4a1de546fb82873c91ead95614a44b106d
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
When sleep instruction is called with interrupts enabled, the
interrupt priority threshold bits need to be set. Only interrupts
with equal or higher priority will wake the sleep. Currently it
is set to 0 unintentionally and only priority 0 interrupt can
wake the sleep.
Jira: ZEP-1349
Change-Id: I927e259345cc37c5ecc4dfdcde996dd16443e61b
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
There is no FIRQ stack in the system in this case, so do not initialize
it.
Change-Id: I8bc068ce43ac8a39909994d8cc01ba0c6a17f4ae
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Also remove NO_METRIC, which is not referenced anywhere anymore.
Change-Id: Ieaedf075af070a13aa3d975fee9b6b332203bfec
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Move _thread_base initialization to _init_thread_base(), remove mention
of "nano" in timeouts init and move timeout init to _init_thread_base().
Initialize all base fields via the _init_thread_base in semaphore groups
code.
Change-Id: I05b70b06261f4776bda6d67f358190428d4a954a
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Use the main stack during very early boot so that we can call memset on
the interrupt and FIRQ stacks. Iniitalize the them before one of them is
used for the rest of the pre-kernel initialization.
Change-Id: Ib57856a66273dda9382e08fa91da5a54847b77c2
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Same issue as with ARM. ARC can use _Swap() though, because the call to
it is serial, not generating a low-priority exception and interrupts are
locked until the main() thread is context-switched into and the
interrupt stack is released.
Fixes ZEP-1310.
Change-Id: Ie1f27f7ad0502191ca2867b5400d6e0bfb7f0fc6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Artifact from microkernel, for handling multiple pending tasks on
nanokernel objects.
Change-Id: I3c2959ea2b87f568736384e6534ce8e275f1098f
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Prio should be an int, since values are small integers, not a fixed-size
int32_t. It aligns with the prio parameters of the other APIs.
Stack size should be size_t.
Change-Id: Id29751b86c4ad7a7c2a7ffe446c2a96ae83c77bf
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
When a thread dies, at least print the pointer to it, so we can debug
better.
Change-Id: Ief6bbc0c221e2d5271c240a4b73df16413aa5e22
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
There was a lot of duplication between architectures for the definition
of threads and the "nanokernel" guts. These have been consolidated.
Now, a common file kernel/unified/include/kernel_structs.h holds the
common definitions. Architectures provide two files to complement it:
kernel_arch_data.h and kernel_arch_func.h. The first one contains at
least the struct _thread_arch and struct _kernel_arch data structures,
as well as the struct _callee_saved and struct _caller_saved register
layouts. The second file contains anything that needs what is provided
by the common stuff in kernel_structs.h. Those two files are only meant
to be included in kernel_structs.h in very specific locations.
The thread data structure has been separated into three major parts:
common struct _thread_base and struct k_thread, and arch-specific struct
_thread_arch. The first and third ones are included in the second.
The struct s_NANO data structure has been split into two: common struct
_kernel and arch-specific struct _kernel_arch. The latter is included in
the former.
Offsets files have also changed: nano_offsets.h has been renamed
kernel_offsets.h and is still included by the arch-specific offsets.c.
Also, since the thread and kernel data structures are now made of
sub-structures, offsets have to be added to make up the full offset.
Some of these additions have been consolidated in shorter symbols,
available from kernel/unified/include/offsets_short.h, which includes an
arch-specific offsets_arch_short.h. Most of the code include
offsets_short.h now instead of offsets.h.
Change-Id: I084645cb7e6db8db69aeaaf162963fe157045d5a
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Regardless of the number of interrupt priorities
supported, the exit of the trap handler can check
AUX_IRQ_ACT to see if it interrupted a FIRQ or IRQ.
Change-Id: I0b84d8298d3e6e437c934c01db4535fa8fe29458
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Add Low Power States support to the power shim layer
and show the usage in the quark_se sample.
States are defined as follow:
- SYS_POWER_STATE_CPU_LPS: SS2 with LPSS enabled
- SYS_POWER_STATE_CPU_LPS_1: SS2 with LPSS disabled
- SYS_POWER_STATE_CPU_LPS_2: SS1 with LPSS disabled
Jira: ZEP-994
Change-Id: Ie4b93f6e539cb53fc035be00280b66b2cb0d9fea
Signed-off-by: Julien Delayen <julien.delayen@intel.com>
PRIMARY, SECONDARY, NANOKERNEL, MICROKERNEL init levels are now
deprecated.
New init levels introduced: PRE_KERNEL_1, PRE_KERNEL_2, POST_KERNEL
to replace them.
Most existing code has instances of PRIMARY replaced with PRE_KERNEL_1,
SECONDARY with POST_KERNEL as SECONDARY has had a longstanding bug
where the documentation specified SECONDARY ran before the kernel started
up, but actually ran afterwards.
Change-Id: I771bc634e9caf7f17dbf214a270bc9967eed7d32
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Verify the thread priorities are within the bounds when starting a new
thread and when changing the priority of a thread.
Change-Id: I007b3b249e4b80235b6439cbee44cad2f31973bb
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
A race condition would happend if a FIRQ interrupted a
return-from-interrupt from a RIRQ at the wrong moment: if a decision was
already taken which thread to context switch in and the FIRQ woke up
another thread of higher priority, the ready queue would be corrupted.
The solution is to lock interrupts at the moment the interrupt return
code starts looking at the kernel queues. Interrupts do not need to be
unlocked before exiting: the return-from-interrupt (rtie) instruction
will restore the correct interrupt locking state for the thread being
context switched in.
Change-Id: I777665c2faeca7b1f2a77ddd9ee2a520080bae88
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
An implementation to flush multiple d-cache lines has been added
per the top-level cache.h API. ZEP-1153 was opened to express
the need for MORE i-cache and d-cache APIs. For example, the current
cache.h API doesn't provide a means to invalidate d-cache lines
and has nothing for i-cache.
I've also modified some of the i-cache related aux registers to have
better names so that they won't be confused with d-cache.
These changes are for
ZEP-1176.
Change-Id: If4c5410451cc40dcd5618fc871093c8febf7e061
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Symbols now use the K_ prefix which is now standard for the
unified kernel. Legacy support for these symbols is retained
to allow existing applications to build successfully.
Change-Id: I3ff12c96f729b535eecc940502892cbaa52526b6
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Adds standard prefix to symbolic option that flags a thread
as essential to system operation.
Change-Id: Ia904a81ce343fdd1cd44caaaeae641d822777f9b
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The GPIO and AON GPIO ports are available to both the x86 and ARC
cores, but the driver always assumed only the x86 at the time of
configuring interrupts.
Use the available macros to set the correct values independently of
which core it's being built for.
Jira: ZEP-1030
Change-Id: I310afcc48780fbe1cac9dc3368a6de11bd797fda
Signed-off-by: Iván Briano <ivan.briano@intel.com>
The SoC level peripherals are accesible by both cores, while the SS
ones are only available to the sensor subsystem. Since the ARC core can
make use of both drivers at the same time, we need to be able to
differentiate their configuration values somehow.
Also disable the SoC GPIO for the ARC by default, as it still needs
more changes to be usable.
Jira: ZEP-1030
Change-Id: Ic5415c404ecd32a3e560467b6f5eaa873a515d72
Signed-off-by: Iván Briano <ivan.briano@intel.com>
IRQ numbers differ between x86 and ARC, as well as the bits that need to
be touched in the interrupt routing masks. QMSI abstracts some of it and
for the rest we do have the information needed.
Add a macro to select the right IRQ number based on which core we are
building for.
Change-Id: I3e6680d10a0a23c98777d2831efe6819fcb54162
Signed-off-by: Iván Briano <ivan.briano@intel.com>
We can derive NUM_REGULAR_IRQ_PRIO_LEVELS by subtracting 1
from CONFIG_IRQ_PRIO_LEVELS if FIRQ is present (which is currently
always the case). If FIRQ is not present, the value will be equal
to CONFIG_IRQ_PRIO_LEVELS since all interrupts will be regular.
Change-Id: Ibefc939e3771bf0adf712127db0d36cb49bf732b
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Fix the error in thread rescheduling:
Fix Fast IRQ exit routine error when it reschedules threads if
(prio >= 0) || (sched_locked == 0) || (next_thread == _current),
while the correct condition for thread rescheduling is:
(prio >= 0) && (sched_locked == 0) && (next_thread != _current),
Fix regular IRQ error when the regular IRQ exit routine rescheduled
threads when (next_thread == _current) instead of
(next_thread != current).
Increased IDLE_STACK_SIZE for ARC architecture, to hold saved
registers.
Change-Id: I1d87a968e231e13822844b7564567e6ca310cde2
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
They were the same, standardize on the lowercase one.
Change-Id: I8bca080e45f3e0970697d4451e468b9081f96f5f
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Gets rid of unnecessary THREAD_MONITOR_INIT() macro, to be
consistent with the approach taken by _thread_monitor_exit().
Aligns x86 code with the approach used on other architectures.
Revises the associated comments and removes unnecessary
doxygen tags.
Change-Id: Ied1aebcd476afb82f61862b77264efb8a7dc66c9
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
- the interrupt (both regular and fast) now does not do rescheduling
if the current thread is a coop thread or if the scheduler is not locked
- the _nanokernel.flags cache of _current.flags is not used anymore
(could be a source of bugs) and is not needed in the scheduling algo
- there is no 'task' field in the _nanokernel anymore: scheduling routines
call _get_next_ready_thread instead
- the _nanokernel.fiber field is replaced by a more sophisticated
ready_q, based on the microkernel's priority-bitmap-based one
- thread initialization initializes new fields in the tcs, and does not
initialize obsolete ones
- nano_private includes nano_internal.h from the unified directory
- The FIBER, TASK and PREEMPTIBLE flags do not exist anymore: the thread
priority drives the behaviour
- the tcs uses a dlist for queuing in both ready and wait queues instead
of a custom singly-linked list
- other new fields in the tcs include a schedule-lock count, a
back-pointer to init data (when the task is static) and a pointer to
swap data, needed when a thread pending on _Swap() must be passed more
then just one value (e.g. k_stack_pop() needs an error code and data)
- the 'fiber' and 'task' fields of _nanokernel are replaced with an O(1)
ready queue (taken from the microkernel)
- fiberRtnValueSet() is aliased to _set_thread_return_value since it
also operates on preempt threads now
- _set_thread_return_value_with_data() sets the swap_data field in
addition to a return value from _Swap()
- convenience aliases are created for shorter names:
- _current is defined as _nanokernel.current
- _ready_q is defined as _nanokernel.ready_q
- _Swap() sets the threads's return code to -EAGAIN before swapping out
to prevent timeouts to have to set it (solves hard issues in some
kernel objects).
Change-Id: Ib9690173cbc36c36a9ec67e65590b40d758673de
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
EM7D was recently merged, and one change suggested there was
to remove conditional checks for NSIM. It is OK to have the simulator
use the exact same memory addresses and sizes as would be found on the
board. This submission fixes EM9D and EM11D to be the same -- i.e.
to not have NSIM conditionals.
See ZEP-966.
Change-Id: Ia990ff7bb4b7ff5071af83723ed3d1420fdff012
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
The EM7D SOC is similar to EM11D, except it has different sized
iccm and dccm memories, and also has FIRQ with RGF_NUM_BANK==1.
To select this SOC on the board, all dip switches are in the up position.
See ZEP-966.
Change-Id: I864ffe0efdf367de0a8cd58e9c46efd7e401c671
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
For the EM Starterkit, one SOC I will soon be adding is EM7D.
This SOC has FIRQ, but only has one register bank.
Thus the interrupt handling for FIRQ needs to be different
when CONFIG_RGF_NUM_BANKS==1. The handler must instead push
registers onto the stack in the same stack frame layout that RIRQ uses.
This allows for context switch to be easily done since its compatible.
The common interrupt entry point _isr_enter must save r0 before using
it, because in the FIRQ 1-bank case, it would be destroyed otherwise.
So a global variable named saved_r0 has been added for this reason.
The stack cannot be used to save r0, because it first has to determine
whether its FIRQ or RIRQ here. This change has been tested on the
EM Starterkit with EM7D SOC changes -- coming soon. To make the review
easier, these 3 files are submitted first.
Also, exceptions will no longer use the _firq_stack.
This stack is not needed in the 1-bank case, but an exception stack
is needed. I've added a new stack called _exception_stack,
and made it be 512B, which should be enough for one exception.
See ZEP-966
Change-Id: I6f228b840da7c4db440dd1cfef4ae25336c87f0d
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
The code density registers are NOT saved on the stack.
This is controlled by bit 13 in AUX_IRQ_CTRL, which didn't even have a symbol
defined for it. I've also added _ARC_V2_AUX_IRQ_CTRL_LP for bit 13.
Change-Id: Ie80853b72bed4e60a5cf1cf0a8c905a3d86180d9
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
In order to add the EM7D SOC, I will be implementing a version of the FIRQ
interrupt handler that saves and restores registers on the stack when
RGF_NUM_BANKS==1. All other ARC SOCs at this time have RGF_NUM_BANKS==2,
allowing for a faster handler that can use the registers in the 2nd register bank.
But EM7D doesn't have this 2nd bank, hence the need for this new configurable choice.
(See ZEP-966)
Change-Id: Ie089f1f079902552cf279c2cda23ee0805b01eed
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
i2c_quark_se_ss driver is deprecated and replaced
by i2c_qmsi_ss. So remove i2c_quark_se_ss definition.
Change-Id: Idcc6a7f01ffae626ae7d5f9966eac67be78599af
Signed-off-by: Qiu Peiyang <peiyangx.qiu@intel.com>
commit e57b21c78c ("irq: Use lowest priority not a
hard-coded priority 2") introduce a wrong whitespace,
not complying with coding style. Remove it.
Change-Id: Ie7e48843e5da6cb3417773ef8a57cf9a166c70d6
Signed-off-by: Qiu Peiyang <peiyangx.qiu@intel.com>
In this file was found an assumption about how many
priorities are being used. This is configurable with
CONFIG_NUM_IRQ_PRIO_LEVELS, however, so it should be using that
instead. This line of code changes:
or r3,r3,(1<<(CONFIG_NUM_IRQ_PRIO_LEVELS-1))
so as to use the correct bit to OR.
Change-Id: I8c6297e98b5163aa27460a68b203e8a27d1e2506
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Set _ARC_V2_DEF_IRQ_LEVEL to the last legal priority value, and not 15.
The last legal value is: (CONFIG_NUM_IRQ_PRIO_LEVELS-1).
This is safer because we don't want priorites not configured to be
enabled.
Change-Id: I1689cc00aa7e707a204d16ec17d7f396566e8638
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
