Because both, RISC-V and ARM cores share the same pinctrl driver. The
top level common folder will disappear with the introduction of HWMv2,
where multi-arch SoCs will be well supported.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Extend Kconfig definitions and nrfx_config translations so that UARTE
instances that are available in nRF54H20 can be used.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
nrf-regtool is a Python utility from Nordic Semiconductor, which is used
for generating binary files with register values for given peripherals.
It sources the descriptions of peripheral registers from CMSIS-SVD files
(typically ones bundled with nRF MDK).
For some peripherals, such as UICR, nrf-regtool supports parsing values
from devicetree as well, based on the bindings already found in Zephyr.
Currently, this tool is not submitted as a script to Zephyr, but it can
be installed from PyPI.
Having nrf-regtool installed is recommended when working with nRF54H20.
Booting the Application or Radiocore CPU requires flashing not only its
firmware, but also its respective UICR instance. On this SoC, the UICR
is used to assign ownership of global hardware resources, including
memory and peripherals, to individual cores. The Zephyr build system can
call nrf-regtool to generate the UICR based on devicetree, to reflect
the boot-time hardware configuration required for a given application.
The generated `uicr.hex` is then merged with `zephyr.hex`, so that they
can be flashed together using west.
The build system integration takes the form of a CMake package, which
includes a version check and reusable components; over time, some of
these components can be reused by sysbuild. This package is located in
the `hal_nordic` module, because it depends on the `SOC_SVD_FILE` CMake
variable, which is defined there as well.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
Add nrfx and Kconfig related infrastructure plus SoC initialization
code to allow building for nRF54H20 targets (Application and Radio
cores).
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
... to cover missing __ICACHE_PRESENT and __DCACHE_PRESENT symbols that
should be defined in MDK files.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Add support for reclocking flexspi in ccm_rev2 driver. Clock update
functions are provided for the RT11xx.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add support for reclocking the FlexSPI on NXP iMX RT10XX. This
functionality requires an SOC specific clock function to set
the clock rate, since the FlexSPI must be reset directly
before applying the new clock frequency.
Note that all clock constants are defined in this commit, since the
memc flexspi driver now depends on a clock node being present.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Consistently use `zephyr_library*` cmake functions for all nRF Series
and set the Cortex-M linker script in a common place for all of them.
Remove no longer needed include directories.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
In nRF54L15 FICR can be accessed also from non-secure code,
so it does not have NRF_FICR_S defined.
Signed-off-by: Magdalena Pastula <magdalena.pastula@nordicsemi.no>
NRF_RTC_TIMER will not be a default timer in the next
version of Nordic timer. It should be soc selection specific.
Signed-off-by: Witold Lukasik <witold.lukasik@nordicsemi.no>
The RA_PINCFG macro is used to generate a value that can be written
directly to the pin function select register. In addition to the pin
function this value also contains port and pin number information,
located in bit fields that are unused by the register. The bit field
used to store the port information consists of 3-bits. However, a typo in
the mask definition limited the field to two bits meaning only ports 0-3
could be configured. This patch resolves the issue, allowing ports 0-7 to
be configured. If the port is greater than 7 another field (port4) is used
to store an additional bit (allowing an additional 8 ports to be
supported). However, use of this field has not yet been implemented.
Signed-off-by: Ian Morris <ian.d.morris@outlook.com>
Adds CAN drivers for XMC4xxx SoCs.
XMC4xxx has multiple CAN nodes. The nodes share a common clock and
a message object pool.
The CAN nodes do not have a loopback mode. Instead there is an
internal bus which can be used to exchange messages between
nodes on the SoC. For this reason tests/samples which rely on the
loopback feature have been disabled.
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
ROM configures the ISP boot pins as gpio to determine what boot mode to
be in. But some ROM revisions have a bug where they do not restore the
reset state of these pins before booting application. This can cause
power leakage on these pins and is not an intended configuration from
Zephyr user/board point of view, so restore the reset state as part of
early SOC init (disable the pins). Configuration of pins should be
left up to app/board devicetree.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
At chip startup, jtag pins are configured by default to enable
debug.
This configuration adds consumption and when using PM profile,
we can save ~40uA by resetting this configuration and setting pins
to analog mode.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
The STM32G0 soc has 2 CAN controllers. The 2nd on was not working
with zephyr yet as both controllers shares the same IRQ. Recently, the
shared irq system was integrated on now, both can controllers can work
on this chip. Shared interrupts must be enabled only if both can
controllers are enabled.
Signed-off-by: Adrien MARTIN <adrienmar@kickmaker.net>
Updated the files present in device_init, hfxo_manager, power_manager
and sleeptimer folder as per latest version of gecko_sdk.
Added SL_DEVICE_INIT_HFXO_PRECISION in sl_device_init_hfxo_config.
Signed-off-by: Sateesh Kotapati <sateesh.kotapati@silabs.com>
Add functions to Atmel SAM SoC PMC API. This is an effort to hide
most of the internal registers used in different SAM families.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
The clock z_arm_platform_init hangs switching between clocks when using
MCUboot. This fixes the issue using the 8MHz internal clock as gclk_main
source when configuring PLL/DFLL.
Fixes: #67220
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
The HAS_SPI_DW Kconfig is rather unncessary. If the synopsys designware
spi is to be included. It should come from the devicetree.
Signed-off-by: Ryan McClelland <ryanmcclelland@meta.com>
With GCC 12.3 and binutils 2.40, the build fails with:
<...>/zephyr/arch/arm/core/cortex_m/cpu_idle.S: Assembler messages:
<...>/zephyr/arch/arm/core/cortex_m/cpu_idle.S:51: Error: junk at end of line, first unrecognized character is `n'
<...>/zephyr/arch/arm/core/cortex_m/cpu_idle.S:133: Info: macro invoked from here
Because the SOC_ON_EXIT_CPU_IDLE macro puts all the statements on a
single line, there must be a semicolon after .rept
Signed-off-by: Ben Wolsieffer <benwolsieffer@gmail.com>
Since it takes 400 bytes of code and it is rarely used disable
by default this feature.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Add support of voltage control to Renesas PFC driver. Voltage register
mappings have been added to r8a77951 and r8a77961 SoCs.
Allow 'power-source' property for 'renesas,rcar-pfc' node. This property
will be used for configuring IO voltage on appropriate pin. For now it
is possible to have only two voltages: 1.8 and 3.3.
Note: it is possible to change voltage only for SD/MMC pins on r8a77951
and r8a77961 SoCs.
Signed-off-by: Mykola Kvach <mykola_kvach@epam.com>
The place where TF-M places its non-secure api header files has changed
Therefore changing it for for all applications that use it.
Signed-off-by: Markus Swarowsky <markus.swarowsky@nordicsemi.no>
Clock DMIC0 from the audio PLL when DMIC driver class is enabled.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Co-authored-by: Yves Vandervennet <yves.vandervennet@nxp.com>
Now that:
1 - LS Clocks sources values are identical accross series
2 - We're able to extract this value from device tree
define STM32_LPTIM_CLOCK choice symbol from device tree
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Commit 447a492 switched to `sys_cache*` to enable caches at SoC init. To
preserve the old behavior of enabling caches at init, is missing to
select `CONFIG_CACHE_MANAGEMENT`.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Since d992683db5 (soc: arm: replace redundant config option for
caches for nxp_imx), RT1xxx series will not have cache enabled at boot
unless CONFIG_CACHE_MANAGEMENT=y. Since this will improve performance,
enable CONFIG_CACHE_MANAGEMENT by default.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Gigadevice was inconsistent with the convention established by other SoC
families, that is, use <vnd_prefix>_<family>. For example, ST STM32 uses
st_stm32. Note that GD32VF103, under soc/riscv, has already been
adjusted.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Use sys_cache* functions to enable the caches for stm32f7 and
stm32h7. This ensures that CONFIG_CACHE_MANAGEMENT is
considered correctly.
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
Use the sys_cache* functions to enable the caches on same70 and
samv71. This will ensure that CONFIG_CACHE_MANAGEMENT is
considered correctly.
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
Remove the redundant cache config options for kv5x and use
the sys_cache* functions to enable the caches. This will automatically
consider CONFIG_CACHE_MANAGEMENT.
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
Replace the redundant cache config options for the nxp_imx and
use sys_cache* functions to enable the caches. These will automatically
consider CONFIG_CACHE_MANAGEMENT.
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
