michaelh/zephyr
1
0
Fork 0
Code Releases Activity
98173 commits 87 branches 0 tags 617 MiB
Commit graph

2960 commits

Author SHA1 Message Date
Grzegorz Swiderski 163cacbe4b dts: nordic: nrf54h20: Add SysCtrl VEVIF node 
Add a VEVIF node to be used for communicating with SysCtrl (cpusys).
This is the only part of the SysCtrl VPR exposed to local domains.

Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
 2024-04-17 14:36:12 +02:00
Tianshuang Ke 8ffefab29f dts: arm: st: Fix incorrect memory mapping and size for STM32L475Xe 
This commit updates the SRAM configuration in the STM32L475 device tree:

- `sram0` size reduced from 128K to 96K.
- `sram1` added with 32K.

These changes correct memory settings to prevent initialization failures.

Signed-off-by: Tianshuang Ke <qinyun575@gmail.com>
 2024-04-17 14:29:22 +02:00
Jakub Zymelka bce52c8057 dts: add nRF54L15 FLPR core 
Add nRF54L15 FLPR core support.

Signed-off-by: Jakub Zymelka <jakub.zymelka@nordicsemi.no>
 2024-04-16 18:36:58 +01:00
Jun Lin 011b730b4c driver: reset: npcx: add driver support for reset controller 
Nuvoton NPCX chips have reset registers which allow to reset the
peripheral hardware modules. This commit adds the support by
implementing the reset driver. Note that only the reset_line_toggle API
is supported because of the nature of the reset controller's design.

Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
 2024-04-16 09:09:13 +02:00
Mahesh Mahadevan e37d1a5489 dts: nxp_mcxn94x: Add DMA channels for FlexComm nodes 
Copy the DMA channel information to both UART and SPI
instances of the Flexcomm as only one of them can be
active.

Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
 2024-04-13 07:03:55 -04:00
Emilio Benavente d2bfed764c dts: arm: nxp: nxp_mcxn94x: Add PWM Support 
Added the dts node for FlexPWM Support.

Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
 2024-04-12 16:53:03 -04:00
Krzysztof Chruściński 8acc6a961a dts: common: nordic: nrf54: Add rx-delay property to SPI 
Add rx-delay property to all SPI nodes.

Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
 2024-04-11 14:30:41 +02:00
Daniel DeGrasse 821ae15744 dts: arm: nxp_rw6xx: add USBOTG devicetree node 
Add devicetree node for USBOTG device, the EHCI based USB controller on
the RW6XX.

Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
 2024-04-11 09:09:00 +02:00
David Leach 00b46686b1 drivers: lpc55s36: Remove deprecated CSS driver 
CSS was deprecated from the mcu-sdk. Removing driver from lpc55s36
to clear build error.

This is a temporary patch to remove the build error.

Fixes #69961

Signed-off-by: David Leach <david.leach@nxp.com>
 2024-04-10 14:11:34 -04:00
TOKITA Hiroshi e678a6247d drivers: serial: rpi_pico: Migrate to pl011 driver 
RaspberryPi Pico's UART can be operated with the pl011 driver.
Replace it with this.

Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
 2024-04-10 10:01:25 +02:00
Nikodem Kastelik 0401d063fa dts: nordic: add PWM instances for nRF54 Series 
Add definitions of PWM peripheral instances so it can be utilized
on nRF54H20 and nRF54L15 devices.

Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
 2024-04-09 11:05:46 +02:00
Adam Berlinger 91acd6c1e0 drivers: timer: add support for LPTIM on STM32H5 
Added support for LPTIM1/2 for STM32H503 and
LPTIM1 to LPTIM6 for STM32H56x/STM32H57x devices

Signed-off-by: Adam Berlinger <adam.berlinger@st.com>
 2024-04-08 15:55:24 +03:00
Adam Berlinger e3c759e835 soc: st: add PM support for STM32H5 
Single STOP mode level supported on STM32H5

Signed-off-by: Adam Berlinger <adam.berlinger@st.com>
 2024-04-08 15:55:24 +03:00
Chun-Chieh Li 360bc4f1ca drivers: i2c: numaker: support Nuvoton's M2L31 series 
Add i2c nodes into soc devicetree

Signed-off-by: Chun-Chieh Li <ccli8@nuvoton.com>
 2024-04-08 09:03:53 +02:00
Daniel DeGrasse cc3de261aa dts: arm: nxp_rw6xx: add LCDIC node 
Add LCDIC devicetree node or RW6xx SOC

Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
 2024-04-04 23:59:37 +03:00
Emilio Benavente dbd1da973b dts: arm: nxp: nxp_mcxn94x: Added watchdog node 
Added the dts node for the
wdt watchdog and updated the
clock frequency.

Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
 2024-04-04 23:58:01 +03:00
Daniel DeGrasse 6b6adc07d0 dts: arm: nxp_mcxn94x: add EDMA channels for LPUART RX and TX 
Add EDMA channels for LPUART RX and TX to LPFLEXCOMM 2 and 4, as these
nodes are enabled with the UART driver

Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
 2024-04-04 19:27:28 +02:00
Steve Boylan 1ceceabad5 dts: bindings: i2c: Correct the I2C reset bit 
It was RPI_PICO_RESETS_RESET_I2C0, but should be
RPI_PICO_RESETS_RESET_I2C1.

Fixes: #70959

Signed-off-by: Steve Boylan <stephen.boylan@beechwoods.com>
 2024-04-03 11:07:05 +01:00
Pieter De Gendt 5944fb38bf dts: arm: nxp: nxp_imx8ml_m7: Add ECSPI instances 
Add device tree instances for ECSPI peripherals and update SoC code to
enable clocks.

Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
 2024-04-02 21:03:47 -04:00
Declan Snyder 7079ea506a dts: nxp_mcxn94x: Add ENET QOS 
Add ENET QOS nodes to MCX DTS

Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
 2024-04-02 21:02:25 -04:00
cyliang tw 820a70242f drivers: spi: support for Nuvoton numaker m2l31x 
Update m2l31x.dtsi for spi support and update spi_numaker.c
for dummy TX data.

Signed-off-by: cyliang tw <cyliang@nuvoton.com>
 2024-04-02 14:30:57 +01:00
Declan Snyder a7988f2986 soc: nxp: lpc55s69: Enable Sleep Mode 
Enable sleep mode on LPC55S69 (corresponding to zephyr's runtime idle
mode). Add DT description and power api implementations.

Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
 2024-04-02 10:38:17 +03:00
Jakub Michalski 311aa332c8 dts: arm: add nodes to support gpio interrupts in renesas rzt2m 
Add common gpio node to pinctrl node (interrupts are shared between ports)
and syscon for interrupt edge detection register in order to support
interrupts in rzt2m gpio

Signed-off-by: Jakub Michalski <jmichalski@internships.antmicro.com>
 2024-03-29 10:56:55 +01:00
Daniel DeGrasse 625f028590 dts: arm: nxp: rw6xx: add DMIC to devicetree 
Add DMIC to devicetree for RW61x SOC

Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
 2024-03-28 09:44:25 +00:00
Zhaoxiang Jin 296b732e63 dts: mcxn947: Add dac node 
Add the dac node

Signed-off-by: Zhaoxiang Jin <Zhaoxiang.Jin_1@nxp.com>
 2024-03-28 09:42:38 +00:00
Mahesh Mahadevan d5b58a527d dts: mcxn947: Add edma nodes 
Add the EDMA nodes.

Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
 2024-03-26 16:39:18 -04:00
Mahesh Mahadevan f27aa9922b dts: mcxn947: Add FlexSPI node 
Add support for FlexSPI for MCXN947 SoC

Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
 2024-03-25 18:40:14 -04:00
Declan Snyder 711375695e soc: nxp: rw: Support Reset cause setting 
Support reset causes on RW SOC

Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
 2024-03-22 15:58:03 -05:00
Mahesh Mahadevan 84febc3929 dts: Add support for MCX internal flash 
Add support for internal flash

Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
 2024-03-22 14:25:31 +00:00
Declan Snyder ad393fbbfa dts: Rename RW pinctrl to MCI IO MUX 
"RW pinctrl" is clearly SOC specific naming for an IP
that is not necessarily constrained to live on one SOC series.

Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
 2024-03-22 08:56:10 +01:00
Declan Snyder 38117c6cbd dts: nxp: rw: Add DMA channels to flexcomm nodes 
Add dma channel descriptions to the flexcomm nodes on RW SOC.

Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
 2024-03-21 16:15:59 +01:00
Piotr Pryga 3140b9585b dts: nrf54h20: Add missing global dppic and ipcst configs 
There were missing global dppic and ipct channels configuration
that allows to deliver events from global peripherlas like GRTC
to Radio domain.

Add missing configuration to nrf54h20 dtsi file.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
 2024-03-21 15:24:06 +01:00
Piotr Pryga e0a23663f6 dts: nrf54h20: move GRTC channels allocation to the SOC dtsi 
The GRTC channels and irqs configuration for Radio domain
is SOC specific not board specific. Move the configuration
to SOC dtsi file.

Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
 2024-03-21 15:24:06 +01:00
Piotr Pryga 6608ff810b boards: nordic: Add to GRTC missing child-owned-channels allocation 
The child-owned-channels property of GRTC is used by nrfx_grtc
driver to exclude channels for common pool of channels allowed
for dynamic allocation. That is sort-of workaround for missing
property that allowes to remove some channels from the pool.

There are also not aligned GRTC IRQs for nRF54H20 and nRF54L15.
Only one of avaialbe IRQs was added to GRTC in DTS whereas
there should be two. That allows to find second IRQ by other
drivers that use GRTC peripehral.

Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
 2024-03-21 09:15:27 +01:00
Declan Snyder a65ae89b9e soc: nxp: rw: Support MRT counter 
Add DT entries and peripheral reset for MRT on RW.

Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
 2024-03-21 09:06:48 +01:00
Declan Snyder 241d41596b soc: nxp: rw: Support CTIMER 
Add DT entries and clocking for CTIMER peripherals on RW61x.

Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
 2024-03-21 09:06:48 +01:00
Declan Snyder 2cb4550dc7 soc: rw: Support WWDT 
Add DT entry and SOC code for watchdog

Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
 2024-03-20 16:19:12 +00:00
Mateusz Michalek e0b748a6ce dts: arm: nordic: nrf54l15 write block size 
write-block-size correction.

Signed-off-by: Mateusz Michalek <mateusz.michalek@nordicsemi.no>
 2024-03-20 07:53:03 -05:00
Declan Snyder 42ff35dc05 dts: rw6xx: Add TRNG Entry 
Add DT entry for TRNG on RW6XX

Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
 2024-03-20 08:56:19 +01:00
Declan Snyder ab7580046a soc: rw: Support I2C Flexcomms 
Support I2C flexcomms by clocking in soc.c and adding DT header

Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
 2024-03-19 09:47:35 +01:00
Andrzej Głąbek a8bb9fd1c1 dts: Remove support for nRF54H20 EngA 
This was a preview revision of the SoC that will no longer
be supported.

Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
 2024-03-18 19:11:36 +00:00
Andrzej Głąbek 029081a3f7 dts: nordic: Add initial support for nRF54H20 
Add definition of the nRF54H20 SoC with its Application, Radio,
and Peripheral Processor (PPR) cores and an initial set of
peripherals.

Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
 2024-03-18 19:11:36 +00:00
Daniel DeGrasse 3bc1524f5d dts: arm: nxp: rw6xx: add dma0 definition 
Add DMA0 definition for RW61x SOC

Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
 2024-03-18 18:57:03 +01:00
Henrik Brix Andersen 41960ab366 dts: bindings: can: remove optional sample point properties 
Remove all optional, initial CAN sample point properties and rely on the
CAN timing calculations to automatically pick the preferred sample point
location based on the initial bitrate.

Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
 2024-03-17 15:36:19 +01:00
Steven Chang b27fac08de dts: i2c: kb1200 i2c device nodes 
Add i2c device nodes and pinctrl nodes for ENE KB1200

Signed-off-by: Steven Chang <steven@ene.com.tw>
 2024-03-15 09:39:48 +00:00
Steven Chang 4fe1a85658 dts: watchdog: kb1200 watchdog device nodes 
Add watchdog device nodes and pinctrl nodes for ENE KB1200

Signed-off-by: Steven Chang <steven@ene.com.tw>
 2024-03-15 09:39:48 +00:00
Steven Chang d0bfe81ce9 dts: tach: kb1200 tach device nodes 
Add tach device nodes and pinctrl nodes for ENE KB1200

Signed-off-by: Steven Chang <steven@ene.com.tw>
 2024-03-15 09:39:48 +00:00
Steven Chang 14c6468bdd dts: pwm: kb1200 pwm device nodes 
Add pwm device nodes and pinctrl nodes for ENE KB1200

Signed-off-by: Steven Chang <steven@ene.com.tw>
 2024-03-15 09:39:48 +00:00
Steven Chang 4d45103589 dts: adc: kb1200 adc device nodes 
Add adc device nodes and pinctrl nodes for ENE KB1200

Signed-off-by: Steven Chang <steven@ene.com.tw>
 2024-03-15 09:39:48 +00:00
Steven Chang 543d550c54 dts: uart: kb1200 uart device nodes 
Add uart device nodes and pinctrl nodes for ENE KB1200

Signed-off-by: Steven Chang <steven@ene.com.tw>
 2024-03-15 09:39:48 +00:00
Steven Chang f66e8afe7c dts: gpio: kb1200 gpio device nodes 
Add GPIO device nodes for ENE KB1200

Signed-off-by: Steven Chang <steven@ene.com.tw>
 2024-03-15 09:39:48 +00:00
Steven Chang 05276b63e8 dts: pinctrl: kb1200 pinctrl dtsi 
Add pinctrl dtsi for ENE KB1200

Signed-off-by: Steven Chang <steven@ene.com.tw>
 2024-03-15 09:39:48 +00:00
Steven Chang 9897761aa5 dts: kb1200 dtsi 
Add dtsi for ENE KB1200

Signed-off-by: Steven Chang <steven@ene.com.tw>
 2024-03-15 09:39:48 +00:00
Jun Lin c2179bcef0 soc: npcx: add support for npcx9m7fb 
Add new SoC npcx9m7fb support for npcx9 series.

Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
 2024-03-15 08:43:47 +00:00
Jun Lin 6057a83060 drivers: entropy: npcx: add rng driver support 
This commit add the rng driver support by using the npcx drgb API.

Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
 2024-03-14 18:14:04 +00:00
Mahesh Mahadevan 739b9bc5e9 dts: mcxn94x: Add initial support for NXP MCXN94X 
Add initial support for NXP MCXN94X

Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
 2024-03-13 22:38:46 +00:00
Declan Snyder 52c4aeb7cb dts: nxp: Add RW6XX Devicetree 
Add SOC devicetree for RW6XX

Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
 2024-03-13 16:45:13 +00:00
Fabio Baltieri ddd2cf1fdc input: convert kscan_mchp_xec.c driver to input 
Convert the XEC keyboard scanning driver from kscan to input, add the
corresponding kscan compatibility node to the current board, build test
only.

Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
 2024-03-12 19:30:09 -04:00
Mikhail Siomin ab5f727660 dts: nxp: Added flexio support for i.MX rt10xx and kinetis ke1xf series 
Added description of flexio peripherals for i.MX rt10xx
and kinetis ke1xf series.

Signed-off-by: Mikhail Siomin <victorovich.01@mail.ru>
 2024-03-12 14:00:45 +01:00
Gerard Marull-Paretas 624c87af16 dts: arm: nordic: keep NFCT disabled by default 
Enabling peripherals at SoC dts files should not be done, unless there
are good reasons (e.g. always needed peripherals). NFCT node should
either be enabled at board level, or, at application level.

Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
 2024-03-12 09:48:22 +00:00
Emilio Benavente 88054a0d3d dts: arm: nxp: fix rt11xx pit warnings 
The pit had a few warnings about
the format of the register address
being uppser case and one of the
reg index values were incorrect.

Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
 2024-03-12 10:40:24 +01:00
Gustavo Silva 722e04da3c flash: stm32: configurable write block sizes 
Add new devicetree bindings for F4 and L1 series for configuration of
block size used in flash write operations.

Allow byte-size write operations in `flash_stm32f1x.c`. This file is
being shared between F0, F1, F3, L0 and L1 series. L0 and L1 series
allows for single byte writes.

Signed-off-by: Gustavo Silva <gustavograzs@gmail.com>
 2024-03-11 18:57:43 +00:00
Francois Ramu 23750ffd90 dts: arm: stm32h7 MPU attribute for the external Memory 
Define the MPU attribute to be ATTR_MPU_EXTMEM for the
external region (qspi- or octo-spi NOR flash)
starting at 0x90000000 of the stm32h7 serie.
A XiP region should be Included inside with attribute
ATTR_MPU_IO, to access the external memory in XIP.
The stm32h7a/h7b serie as another external area at 0x70000000.

Signed-off-by: Francois Ramu <francois.ramu@st.com>
 2024-03-11 14:41:08 +01:00
Georgij Cernysiov 0418179b12 dts: stm32h723.dtsi: fix timers23 address format 
Fixes: simple-bus unit address format error,
expected "4000e000".

Signed-off-by: Georgij Cernysiov <geo.cgv@gmail.com>
 2024-03-11 14:23:25 +01:00
cyliang tw e22958ceaf soc: nuvoton: numaker: add support for m2l31x series 
Add initial support for nuvoton numaker m2l31x SoC series
including basic init.

Signed-off-by: cyliang tw <cyliang@nuvoton.com>
 2024-03-11 14:22:55 +01:00
Ioannis Karachalios cfc0a1ff34 dts: renesas: smartbond: Add support for the display driver class. 
Define a single node that reflects the LCDC IP. Instead of defining
the same IP block twice with different compatibles (mipi dbi, display)
we define a single node for the default display interface and
other interfaces like the MIPI DBI should override the compatible entry
with the appropriate one within its DTS overlay file.

Signed-off-by: Ioannis Karachalios <ioannis.karachalios.px@renesas.com>
 2024-03-08 10:21:06 +00:00
Emilio Benavente 9815296500 dts: arm: Enabling pit for imx devices 
Enabled the PIT and Multi channel support
for some of the rtXXXX devices.
- rt1010
- rt1060
- rt1160
- rt1170

Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
 2024-03-07 13:23:58 -06:00
Emilio Benavente 8bb95d33be drivers: counter: Adding Mutli Channel PIT Support 
Updating the nxp,pit driver to support mutliple
channels. Updating the dts and board overlays
to account for the changes.

Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
 2024-03-07 13:23:58 -06:00
Emilio Benavente 04b240c830 dts: bindings: renamed binding used for pit 
Renamed pit binding from nxp,kinetis-pit
to nxp,pit

Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
 2024-03-07 13:23:58 -06:00
Ioannis Karachalios 2ad5c4c6a1 dts: renesas: smartbond: Add support for the MIPI DBI host controller. 
Update SoC DTS configurations to support the Renesas MIPI DBI host
controller.

Signed-off-by: Ioannis Karachalios <ioannis.karachalios.px@renesas.com>
 2024-03-06 10:17:13 +00:00
Andrew Featherstone 1c50ba489f drivers: rtc: rpi_pico: Add alarm support to RPi Pico RTC driver 
This adds support for the alarm functionality of the RPi Pico RTC.

Signed-off-by: Andrew Featherstone <andrew.featherstone@gmail.com>
 2024-03-06 10:08:48 +00:00
Andrew Featherstone df8c89b528 drivers: rtc: rpi_pico: Add support for the Raspberry Pi Pico RTC 
This adds the minimal get_time/set_time support for the rp2040 and
enables support by default on the Pico boards. This doesn't support
configuring the clock source or alarm interrupts yet.

Signed-off-by: Andrew Featherstone <andrew.featherstone@gmail.com>
 2024-03-06 10:08:48 +00:00
Gerard Marull-Paretas dec5ab382f dts: nordic: nrf54h20_enga: add BELLBOARD nodes 
Add nodes for APP/RAD BELLBOARD peripherals.

Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
 2024-03-05 16:50:36 +00:00
Gerard Marull-Paretas b823bacecb dts: nordic: nrf54h20_enga: add PPR VEVIF nodes 
Add a new nodes for PPR's VEVIF. In app cores, VEVIF registers are part
of the VPR peripheral, so it is exposed as a child node (since it
requires its own properties, eg #mbox-cells). In VPR, it's a CPU child
since it's not a memory-mapped peripheral, but used with CSRs.

Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
 2024-03-05 16:50:36 +00:00
Cong Nguyen Huu 46d6e2e099 nxp_s32_canxl: use RTD API instead the current can_nxp_s32_abort_msg() API 
On HAL RTD version 1.0.0, there is available Canexcel_Ip_DeactivateMD()
API that have similar capabilities as can_nxp_s32_abort_msg() API,
can use to instead.
Remove the reg grp_ctrl and reg base_dsc_ctrl that unused
after implementation this.

Signed-off-by: Cong Nguyen Huu <cong.nguyenhuu@nxp.com>
 2024-03-05 10:54:50 +01:00
Jan Bylicki 112bcb229c soc/arm/renesas_rzt2m: set default System Clock Control register values 
Introduced changes to set the default values
for clock control registers

Signed-off-by: Jan Bylicki <jbylicki@antmicro.com>
 2024-03-04 22:14:48 +01:00
Guillaume Gautier f1bfbb0627 dts: arm: st: wba: do not enable standby pm mode 
Do not enable Standby low-power mode by default since the associated
Kconfig PM_S2RAM is disabled by default. Otherwise we could enter an
unsupported low-power state.

Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
 2024-03-04 22:14:11 +01:00
Manimaran A 28475a3496 drivers: pwm: bbled: Update bbled-pwm dts files 
Updated Overlay, dtsi and yaml files.

Signed-off-by: Manimaran A <manimaran.a@microchip.com>
 2024-03-03 18:59:03 +01:00
cyliang tw 7cb3f47ae9 drivers: watchdog: support Nuvoton numaker WWDT 
Add Nuvoton numaker series window watchdog feature.

Signed-off-by: cyliang tw <cyliang@nuvoton.com>
 2024-03-03 18:58:46 +01:00
Torsten Rasmussen 8dc3f85622 hwmv2: Introduce Hardware model version 2 and convert devices 
This is a squash of the ``collab-hwm`` branch which converts all
in-tree boards to hardware model version 2 including build system
changes, board updates and soc conversions.

This squash is a combination of the following commits:

ca214745a1 soc: Remove soc_legacy folder and move ARM Kconfig
f12cb0979f scripts: ci: check_compliance: remove HWMv1 checks
1807bcf4d4 boards: mimx8mq_evk: port to HWMv2
3ec2299c62 soc: nxp: port imx8mq SOC to HWMv2
8ea02f4e63 boards: verdin_imx8mp: convert to HVMv2
f2eb7652ce boards: phyboard_pollux: move to HVMv2
ab509a5ee0 boards: nxp: mimx8mp_evk: port M7 core to HWMv2
06ad037f99 soc: nxp: imx8mp: port M7 core to HWMv2
3f9e706859 boards: mimx8mm_phyboard: convert to HVMv2
204372d264 boards: imx8mm_evk: port CM4 core to HWMv2
f82c961a46 soc: nxp: imx8mm: port iMX8MM M4 core to HVMv2
6987b2e305 boards: pico_pi: convert to HVMv2
84484e6707 boards: warp7: convert to HWMv2
ae443d1e3c boards: meerkat96: port to HWMv2
e3629c64e6 boards: colibri_imx7d: port to HWMv2
fc835d893d soc: nxp: convert iMX7 Dual core to HWMv2
29ef2f23eb boards: udoo_neo_full: convert to HWMv2
fd49b1749e soc: nxp: convert iMX6 SoloX core to HWMv2
1e59b7a3fd soc: nxp: imxrt11xx: only set
           CONFIG_CPU_HAS_FPU_DOUBLE_PRECISION for M7
69bb0eb258 hwmv2: MAINTAINERS: Fix NXP maintainer yaml
1c4458890f boards: firefly: roc_rk3568_pc: Fix SMP configuration
651a4370ad boards: Fix variants and revisions
196cfda66d tests/samples: Drop default revision identifiers
6ec6b1d75a boards: Drop revision from twister identifiers for
           default revisions
b774cdd59f scripts: utils: board_v1_to_v2: drop board_legacy prefix
7aa36e6640 boards: riscv: esp32c3_luatos_core: make usb variant
fe25709a9c twister: add unit_testing soc and board
f88f211b4e scripts: ci: check_compliance: improve the "not sorted"
           command
b21a455dfb bluetooth: controller: Fix openisa checks
fdc76c48a7 workflow: compliance: Add rename limit
14ecafc67d dts: bindings: vendor-prefixes: Sort entries
dbc366c3c7 soc: nxp: lpc: Move wrong configurations
8e02c08f96 maintainers: Fix invalid paths
b1b85e2495 boards: up: Fix spaces
58cc4013b3 maintainers: Fix xen path
66ce5c0b09 boards/soc: Add missing copyright headers
bb47243254 boards: qemu: x86: Remove pointless file
2e816a8a3a samples: tests: update esp32-based board naming
9aeab17139 samples: tests: remove platform_exclude of esp32 boards
a4fe97b9de boards: shields: m5stack_core2_ext: update board name
615fcab94a samples: ipm_esp32: fix board labels and skip testing
7752f69b7f boards: legacy: remove index entry for xtensa/riscv
           boards.
3eba827956 MAINTAINERS: update Espressif entries
914362bbd5 boards: xtensa: yd_esp32: Convert to v2
a62278fd23 boards: xtensa: xiao_esp32s3: Convert to v2
b6a11ccec4 boards: xtensa: olimex_esp32_evb: Convert to v2
c1067c16d2 boards: xtensa: odroid_go: Convert to v2
b8340b0109 boards: xtensa: m5stickc_plus: Convert to v2
9d81e417be boards: xtensa: m5stack_stamps3: Convert to v2
c296672720 boards: xtensa: m5stack_core2: Convert to v2
fada12aa9d boards: xtensa: m5stack_atoms3_lite: Convert to v2
fe37ebac1e boards: xtensa: m5stack_atoms3: Convert to v2
d32828fe6a boards: xtensa: kincony_kc868_a32: Convert to v2
5afba7855b boards: xtensa: heltec_wireless_stick_lite_v3: Convert to
           v2
ca48c17723 boards: xtensa: heltec_wifi_lora32_v2: Convert to v2
db1fd4d229 boards: xtensa: esp32s3_luatos_core: Convert to v2
a78b2552eb boards: xtensa: esp32s3_devkitm: Convert to v2
cc96061d96 boards: xtensa: esp32s2_saola: Convert to v2
ed854e05d1 boards: xtensa: esp32s2_lolin_mini: Convert to v2
4fa1ae8110 boards: xtensa: esp32s2_franzininho: Convert to v2
5543040a18 boards: xtensa: esp_wrover_kit: Convert to v2
2335ae79b3 boards: xtensa: esp32_ethernet_kit: Convert to v2
f910b7ad4f boards: xtensa: esp32_devkitc_wrover: Convert to v2
32104db555 boards: xtensa: esp32_devkitc_wroom: Convert to v2
e23a41200d boards: riscv: icev_wireless: Convert to v2
3c670e4e53 boards: riscv: xiao_esp32c3: Convert to v2
fc7c6a060b boards: riscv: stamp_c3: Convert to v2
22c2edb89c boards: riscv: esp32c3_luatos_core: Convert to v2
0a96dcb778 boards: riscv: esp32c3_devkitm: Convert to v2
be1ee1c446 vendors: update vendors lists
5e6c62137f soc: espressif_esp32: Port to HWMv2
037a3b52a4 boards: Raspberry Pi pico pwm led adjustment
7277cae6fa samples: blinky_pwm: enable pwm_leds in rpi_pico overlay
da3e49d34e boards: nxp: update selection of
           FLASH_MCUX_FLEXSPI_XIP_MEM_TARGET
bc8424dd3b soc: nxp: imxrt: move FLASH_MCUX_FLEXSPI_XIP_MEM_TARGET
           to SOC level
041cb52939 soc: brcm: bcm_vk: Rename to bcnvk
576b43a95c soc: Fix SOC_FAMILY name mismatches
e8f3e6494d hwmv2: boards: intel: adsp: Fix runner after paths
           renamed
550399e927 boards: weact: stm32g431_core: Add wrongly deleted file
           back
08708c909e tests: drivers: flash: Renamed missed board rename
06dac41e68 hwmv2: Convert Seagate Faze board to hwmv2
dd8f842b40 hwmv2: nxp: update MAINTAINER paths for hwmv2
b4d1c04978 hwmv2: lpc: updated overlay and conf files in samples and
           tests
067c69089e boards: nxp: convert lpcxpresso55s69 to hwmv2
097205b40a hwmv2: Global fix of lpc54114_m4 overlay and conf files
d8cfa6fb29 boards: nxp: convert lpcxpresso54114 to hwmv2
c29ed228c6 boards: nxp: convert lpcxpresso55s36 to hwmv2
88cfd3d6ac boards: nxp: convert lpcxpresso55s28 to hwmv2
ad30c940ee boards: nxp: convert lpcxpresso55s16 to hwmv2
9e5a10ec80 boards: nxp: convert lpcxpresso55s06 to hwmv2
5650c83268 boards: nxp: convert lpcxpresso51u68 to hwmv2
82cf44be45 boards: nxp:  convert lpcxpresso11u68 to hwmv2
1a9c405a6f soc: nxp: convert LPC SOC family to hardware model V2
f2b536d253 boards: intel: doc: hwmv2: Fix some renamed paths
5ee6058710 samples/tests: Use board revisions
b76687602f boards: Add yaml files for boards missing revisions
32ae4918d0 boards: nordic: Fix board names
cc1dabca65 MAINTAINERS: Update for renamed folders
a37ddce659 soc: xilinx: Rename to xlnx
a1393a07f6 soc: xenvm: Rename to xen
813ed00f67 soc: raspberry_pi: Rename to raspberrypi
71317d6798 soc: cadence: Rename to cdns
8cb0c51ec6 soc: broadcom: Rename to brcm
2b9db15c69 soc: andes: Rename to andestech
0101216ce1 soc: altera: Rename to altr
4b4c3ca65d boards: wurth_elektronik: Rename to we
cdc3ef499f boards: ublox: Rename to u-blox
cabdd4ad05 boards: space_cubics: Rename to sc
4b5bd7ae8a boards: seeed_studio: Rename to seeed
a992785ceb boards: raspberry_pi: Rename to raspberrypi
3c1cdc20fe boards: laird_connect: Rename to lairdconnect
291c7cde2b boards: cadence: Rename to cdns
95db897526 boards: broadcom: Rename to brcm
0a47b94879 boards: beagleboard: Change to beagle
9f9f221c24 boards: andes: Rename to andestech
e7869ca38a boards: altera: Rename to altr
bf2fb5eca3 various: Change SOC_FAMILY_NRF to SOC_FAMILY_NORDIC_NRF
e25730ba56 modules: tf-m: Rename from nordic_nrf to nordic
9e3466606a boards: nordic_nrf: Rename to nordic
09a398dcc8 soc: nordic_nrf: Rename to nordic
cb8ffc74f8 boards: renode: Add documentation index
2291ff4b55 boards: arm: riscv32_virtual: Convert to v2
484b7f1996 soc: riscv_renode_virtual: Port to HWMv2
cc5c2fb0c7 soc: raspberry_pi: Fix SOC_SERIES and SOC mismatch
59cb580513 soc: arm: designstart: Fix SOC_SERIES and SOC mismatch
aa9e0de7af samples: Fix invalid links
a1480cf1cf maintainers: Fix paths
0d719e004b boards: Update documentation links
eb5c3e6f79 boards: wurth_elektronik: Drop duplicate prefix
a34a3640b7 boards: waveshare: Drop duplicate prefix
cf50e950e7 boards: weact: Drop duplicate prefix
737cfb548f boards: sparkfun: Drop duplicate prefix
505494c97a boards: segger: Drop duplicate prefix
4eaf69f37a boards: ruuvi: Drop duplicate prefix
a1335caeae boards: ronoth: Drop duplicate prefix
a9f7f30bf6 boards: raytac: Drop duplicate prefix
80db4c81b3 boards: qemu: Drop duplicate prefix
433d7e9976 boards: particle: Drop duplicate prefix
4ea79d19e7 boards: olimex: Drop duplicate prefix
fd4ae6f6a8 boards: mikroe: Drop duplicate prefix
36080549bd boards: khados: Drop duplicate prefix
169bf8ae1d boards: intel: Drop duplicate prefix
25f04d5222 boards: holyiot: Drop duplicate prefix
11c2af0de8 boards: google: Drop duplicate prefix
d5128f4016 boards: ebyte: Drop duplicate prefix
44fbc68cad boards: dragino: Drop duplicate prefix
f7fe431b44 boards: contextual_electronics: Drop duplicate prefix
9094fea63b boards: circuit_dojo: Drop duplicate prefix
b632acc1fc boards: blue_clover: Drop duplicate prefix
1a3316ebdc boards: bbc: Drop duplicate prefix
71c0344f8c boards: arduino: Drop duplicate prefix
f0176fc25f boards: altera: Drop duplicate prefix
36b920ed0f boards: adi: Drop duplicate prefix
22520368d9 boards: adafruit: Drop duplicate prefix
296acfb2bc boards: actinius: Drop duplicate prefix
55063380b7 boards: 96boards: Drop duplicate prefix
1f93394b55 boards: nxp: convert mimxrt595_evk to hardware model v2
e7a4fd2ec1 soc: nxp: rt5xx: convert RT5xx SOC to HWMv2
01942f1d11 twister: normalize platform name when storing files/data
477c8b84dd twister: tests: test with slashes in platform names
64e3e816c4 soc: Add include guards
3a7aa2fa49 gitignore: update the compliance file list
84e1c17ad9 scripts: ci: check_compliance: add a check for board yml
           file
a90f53ad57 boards: sync up the vendor tags and vendor-list
af9aa65299 dts: vendor-prefixes: add keep-sorted markers
50f0bf05a3 dts: vendor-prefixes: sort the vendor list
a10b614aa4 dts: vendor-prefixes: ensure all prefixes are lowercase
5abe735e93 manifest: update SOF sha for NXP HWMv2
9ab8f64ca9 modules: rename SOC_FAMILY_IMX
483ff8dd4d modules: mcux: remove SOC_FAMILY_NXP_ADSP
f113dd5342 samples: update board name
39b31287d9 boards: nxp: Convert i.MX ADSP boards to hardware model
           v2
1511e356a2 soc: nxp: Port i.MX ADSP family to hardware model v2
c91e25ab47 soc: mec: rename all mec1501x reference to mec15xx
1c231fd939 hwmv2: boards: Convert IMXRT boards
417cff1e60 hwmv2: soc: Port IMXRT family to HWMV2
28d4e41b1b hwmv2: clean up arm64 soc and board empty directory
2b520f83cb hwmv2: port NXP SoC LS1046A to V2
bf7899c645 hwmv2: port nxp_ls1046ardb board to V2
33f7b61866 samples/tests: Rename numaker boards
8f20ea6e93 boards: nuvoton: numaker_pfm: Split into 2 boards
7cf4ff43a1 drivers: pinctrl: imx: align with hwm v2
c68e1fea4e drivers: clock_control: ccm_rev2: align with hwm v2
           update
3b49014a0f hwmv2: move imx8mn EVK board to V2
14f344eeab hwmv2: move imx8mp EVK board to V2
40f3f8f22d hwmv2: move imx8mm EVK board to V2
10bf79ea51 hwmv2: move imx8m soc for a-core to V2
8727d5ca80 hwmv2: move imx93 EVK board to V2
c81ef01563 hwmv2: move imx93 soc to V2
5836c1b699 modules: mcux: introduce CONFIG_MCUX_CORE_SUFFIX
338f6f2bf1 doc: update board porting guide to match new hardware
           model
9639a1b5dc soc: silabs: drop useless defconfigs
981807444e soc: silabs: introduce SOC_GECKO_SDID
5d07e82485 soc: silabs: SOC_FAMILY_* replace SOC_GECKO_SERIES*
2fd081ac86 soc: silabs: align comments with soc tree
66d425f571 soc: silabs: split in families
5bd38f47a9 arch: arch: kconfig: Fix wrong placement of endmenu
00c6ef25be tests/samples: Rename overlay files for renamed boards
0c639b8378 boards: Fix bools and selections
c2ef907d1d drivers: flash: it8xxx2: Add missing Kconfigs
553de2ebc9 soc: ite: ec: it8xxx2: Fix SOC_SERIES being in wrong file
b8ec0080c2 boards: Documentation link fixes
eb7025e50f tests: Update board names for hwmv2
10ef3d4bd2 boards: silab: Add documentation index file
ba9fdaa1d6 boards: arm: efr32_radio: Convert to v2
86c8d4a0ca boards: arm: efm32pg_stk3402a: Convert to v2
575ac5cafb manifest: Update hal_silabs
87b2907304 boards: arm: efr32_thunderboard: Convert to v2
14b30055ab boards: arm: efr32mg_sltb004a: Convert to v2
0012bfc15d boards: arm: efr32xg24_dk2601b: Convert to v2
f526225ead boards: arm: efm32wg_stk3800: Convert to v2
19e7df29df boards: arm: efm32pg_stk3401a: Convert to v2
0bd7d963d6 boards: arm: efm32hg_slstk3400a: Convert to v2
795a90f9bf boards: arm: efm32gg_stk3701a: Convert to v2
43d5540be7 boards: arm: efm32gg_slwstk6121a: Convert to v2
065148d856 boards: arm: efm32gg_sltb009a: Convert to v2
1dc9a8aa17 soc: silabs_exx32: Port to HWMv2
763571e878 tests: Expand names
dae301b8a3 boards: xen: xenvm: Expand name
19e60eef36 boards: qemu: qemu_cortex_a53: Expand names
a0a7c30f28 soc: intel: intel_adsp: Fix issues
df9a4223fe scripts: ci: introduce soc name check in check_compliance
ed401abaff soc: emsdsp: align SoC name defined in soc.yml to Kconfig
           SOC setting
fc78e5eaa4 MAINTAINERS: update RISC-V arch area paths
4e586958ff boards: convert QEMU RISC-V 64 bit board to Zephyr HWMv2
f4c31a2b86 boards: convert QEMU RV32E board to Zephyr HWMv2
5b2ffc652b boards: convert QEMU RISC-V 32 bit board to Zephyr HWMv2
5db061a4c6 soc/riscv: convert the QEMU virt RISCV-32 SoC to HWMv2
6547845e9d boards: convert SparkFun RED-V Things Plus to Zephyr
           HWMv2
95a1f96399 boards: convert SiFive HiFive Unmatched to Zephyr HWMv2
e563eb0a62 soc/sifive/sifive_freedom: add SiFive Freedom FU740 SoC
8914bc58b6 boards: convert SiFive HiFive Unleashed to Zephyr HWMv2
7e8de1e781 soc/sifive/sifive_freedom: add SiFive Freedom U540 SoC
bfcc2ed18f boards: convert SiFive HiFive1 Rev. B to Zephyr HWMv2
330fc38f9f boards: convert SiFive HiFive1 to Zephyr HWMv2
b9e06f4c38 soc/sifive/sifive_freedom: add SiFive Freedom E310 SoC
4b90b30b9d scripts: west_commands: completion: Add hwmv2 complete to
           fish
0f6842e2fa scripts: west_commands: completion: Add hwmv2 complete to
           zsh
b2af1e1737 scripts: west: list_boards: Fix hwmv2 output
686a4b78b8 scripts: west_commands: completion: Add hwmv2 complete to
           bash
396b6bb856 soc: nxp: fix typo in SoC name
765299c627 soc: broadcom: align SoC names defined in soc.yml to
           Kconfig SOC setting
7efd46eb41 soc: arm: align SoC names defined in soc.yml to Kconfig
           SOC setting
505cbc5c42 soc: mec: align SoC names defined in soc.yml to Kconfig
           SOC setting
951a140701 soc: ti: define SOC name in Kconfig
a795d28810 snippets: Initial HWMv2 support
f9a957e6f6 boards: nordic: nrf9160dk: Fix missing nrf52840 config
df994e7ee8 soc: xilinx: zync7000: Remove xilinx from soc series name
8dfabd56ca soc: cypress: Add protection guard to file
447b951593 tests: kernel: tickless: Remove old board name
bad5dfa71f boards: nordic: nrf5340dk: Fix board names
ad2e863f39 soc: atmel: Use new family prefix
3f08e714b2 soc: intel_adsp: hwmv2: Align SOC_SERIES_INTEL_ACE name
           and value
6734597a76 soc: intel_adsp_cavs: hwmv2: Align SOC_SERIES name and
           value
2908af0bcc boards: nrf51dk/dongle: change SoC to nRF51822
d1ceb29fca soc: align CONFIG_SOC values to match soc.yml names
4768ccaf70 tests: drivers: gpio: gpio_api_1pin: exclude hifive1
ebdb0879ad boards: nxp: s32z2xxdc2: convert to hwmv2
ae82580d08 boards: nxp: mr_canhubk3: convert to hwmv2
c5f0defbae boards: nxp: ucans32k1sic: convert to hwmv2
1e46cabce6 soc: nxp: convert NXP S32 family to hwmv2
f2f85133f2 soc: stm32: Rename series path
86642f4e78 soc: stm32: Rename Kconfig SOC_SERIES symbols
c61e807896 soc: stm32: Cleanup Kconfig.defconfig files
ca46c8abc9 tests: Fix board names
fbfed5f48f maintainers: Update synopsys entries
8cd8b1cc47 boards: synopsys: Add documentation index
6f6cc57a04 boards: arc: hsdk4xd: Convert to v2
c4c14a54ca soc: snps_arc_hsdk4xd: Port to HWMv2
06c2054e5c boards: arc: iotdk: Convert to v2
ff0e0fce1b soc: snps_arc_iot: Port to HWMv2
334264c46a boards: arc: emsdp: Convert to v2
8b947a0e91 soc: snps_emsdp: Port to HWMv2
990417bbde tests: Update board names for hwmv2
e12719154a boards: arc: em_starterkit: Convert to v2
437a430fbe soc: snps_emsk: Port to HWMv2
f93387f968 boards: arc: hsdk: Convert to v2
1cf2498b13 soc: snps_arc_hsdk: Port to HWMv2
47abe81256 boards: arc: nsim: Convert to v2
1e33786dc4 soc: snps_nsim: Port to HWMv2
7f081914db boards: arc: qemu_arc: Convert to v2
bc97349dbd soc: snps_qemu: Port to HWMv2
a9902ff58e boards: Use zephyr_file for file links
126e1a4e72 boards: Fix invalid documentation links
899f0257c3 boards: stm32wb: Restore missing .defconfig files
790c10b1ee soc: x86/atom: imply mmu, do not select it
faee62088d boards: x86: remove qemu_x86_tiny_768
c34d186a57 x86: atom: remove soc.h with unused content
1be3a9e9d3 x86: remove legacy ia32, use atom instead
60e6b400f9 boards: qemu: move qemu_x86 -> x86
c4fbac27e8 boards: infineon: Add documentation index
b4dd29a9c4 maintainers: Update paths for hwmv2
380f5fdb2b boards: cypress: Add documentation index
9de981be05 boards: arm: xmc47_relax_kit: Convert to v2
6394e8a348 boards: arm: xmc45_relax_kit: Convert to v2
04dbf17e19 soc: xmc_4xxx: Port to HWMv2
c9731f1bce boards: arm: cy8cproto_063_ble: Convert to v2
53d41869d1 boards: arm: cy8cproto_062_4343w: Convert to v2
46c4f01427 boards: arm: cy8ckit_062s4: Convert to v2
d285e19cf2 boards: arm: cy8ckit_062_wifi_bt: Convert to v2
2bebd7298c boards: arm: cy8ckit_062_ble: Convert to v2
af243274c2 soc: psoc6 and psoc_6: Port to HWMv2
105a2bae84 cmake: modules: boards: Fix board deprecation for HWMv2
dca54e000a cmake: modules: boards: Enhance board aliases for HWMv2
fc314e8e3f cmake: modules: boards: Fix BOARD_ALIAS
9a7c2ce6d5 soc: gaisler: Move Kconfig file
1ac56d0501 soc: soc_legacy: mips: Remove out file
c054381a7a boards: adjust few boards/ paths
4d93b8d9fd boards: convert all microchip MEC boards to hwmv2
ab2fcb1245 soc: convert microchip_mec to hwmv2
ead4b57a7b soc: arm64: intel_socfpga: hwmv2: Rename SoCs
d4c143d306 MAINTAINERS: intel_socfpga: Adjust to HWMv2 move
70a66ac03a boards: arm64: intel_socfpga: Move boards to
           subdirectories
8a85c07799 boards: arm64: intel_socfpga_agilex5_socdk: move to HWMv2
8c253a99fc boards: arm64: intel_socfpga_agilex_socdk: move to HWMv2
ab883b8019 soc: arm64: intel_socfpga: Move and convert to HWMv2
7c8b7a153b soc: arm: intel_socfpga_std: Rename with HWMv2
8dc2b911f6 soc: board: intel_socfpga_std: Align names to 'Cyclone V'
402366117a soc: arm: intel_socfpga_std: Align board subdirectory
f0a8d12745 boards: arm: cyclonev_socdk: Move to HWMv2
2271f17a86 soc: arm: intel_socfpga_std: Move and convert to HWMv2
841c2a9d99 boards: riscv: beaglev_fire: Convert to v2
3b314531ab boards: riscv: mpfs_icicle: Convert to v2
d4ea2bf70b boards: riscv: m2gl025_miv: Convert to v2
5256e9fcc3 soc: microchip_miv: Port to HWMv2
18e5cf1d51 maintainers: Update path for hwmv2
eab8628f98 boards: arm: qemu_cortex_m3: Convert to v2
1532f2fee1 soc: ti_lm3s6965: Port to HWMv2
430ca6a475 maintainers: Update ambiq paths
a9b9b41b91 boards: ambiq: Add index
db0271ecbb boards: arm: apollo4p_blue_kxr_evb: Convert to v2
957e2b2061 boards: arm: apollo4p_evb: Convert to v2
5a90a44454 soc: ambiq: Port to HWMv2
a20c113fbd boards: nxp: convert ip_k66f to hwmv2
34e3852a54 boards: nxp: convert usb_kw24d512 to hwmv2
20ad604de6 boards: nxp: convert twr_kv58f220m to hwmv2
2e2a7b7656 boards: nxp: twr_ke18f: convert to hwmv2
f7dcc2eb5e boards: nxp: convert rddrone_fmuk66 to hwmv2
b58e90a2e9 boards: nxp: convert hexiwear to hwmv2
aae6e9e454 boards: nxp: frdm_kw41z: convert to hwmv2
1d3baac2d6 boards: nxp: convert frdm_kl25z to hwmv2
3b1d21483f boards: nxp: frdm_k82f: port to hwmv2
6046e6ded9 boards: nxp: port frdm_k64f to hwmv2
0a7bf9fd79 boards: nxp: port frdm_k22f to hwmv2
dce697c823 boards: nxp: add toctree placeholder
666a353409 soc: nxp: kinetis: convert kinetis SOC family to hardware
           model V2
89f0a6034b maintainers: Update paths for renesas boards/socs
004bd43c48 tests/samples/snippets: Update board names for hwmv2
a6d756923d boards: arm and arm64: rcar_h3ulcb: Convert to v2
3801216b8d boards: arm64: rcar_salvator_xs_m3: Convert to v2
b7cc30aaea boards: arm: rcar_h3_salvatorx_cr7: Convert to v2
866427ea29 boards: arm: arduino_uno_r4: Convert to v2
2689b3f0ee soc: ra: Port to HWMv2
e7ebc727c8 boards: arm: da1469x_dk_pro: Convert to v2
903265b2bb boards: arm: da14695_dk_usb: Convert to v2
529a78ed51 soc: smartbond: Port to HWMv2
97cf636ae0 boards: arm: rcar_spider_cr52: Convert to v2
6d0c53f3a1 soc: rcar: Port to HWMv2
44e0aa0668 soc: renesas: rzt2m: Move folder structure for more SoCs
85238fc205 boards: misc: Fixed STM32 based boards doc links
dffc08af56 boards: riscv: niosv_m: move and convert to HWMv2
545093abe4 boards: riscv: niosv_g: move and convert to HWMv2
ecfa192f1b soc: riscv: intel_niosv: move and convert to HWMv2
fd1e8cdc30 hwmv2: sof: intel_adsp: submanifest provisional link
8bf067e625 doc: boards: intel_adsp: Re-order pages
4833275ccd MAINTAINERS: intel_adsp: Adjust to HWMv2 move
b9a70e5ea2 soc: intel_adsp: tools: pylint compliance workaround
18c70cc4bf hwmv2: tests: boards: intel_adsp: Adjust board names
ca52baf9de hwmv2: boards: intel_adsp: Overhaul board configurations
d1b3bcce64 soc: boards: xtensa: intel_adsp_ace: Rename with HWMv2
f362a8ae2c doc: soc: boards: intel_adsp_cavs25: Rename with HWMv2
51dee5da92 tests: samples: boards: intel_adsp_cavs25: Rename with
           HWMv2
e66c35e0d0 boards: xtensa: intel_adsp_cavs25: Rename board with
           HWMv2
d1491a4810 soc: boards: xtensa: intel_adsp_cavs25: Rename with HWMv2
fa0fca79c4 scripts: west: runners: intel_adsp: Adjust path to HWMv2
acd18bfaf7 boards: xtensa: intel_adsp_ace20_lnl: move and convert to
           HWMv2
546c94b958 boards: xtensa: intel_adsp_ace15_mtpm: move and convert
           to HWMv2
8aab718c3e boards: xtensa: intel_adsp_cavs25_tgph: change to board
           variant
30f17424a4 boards: xtensa: intel_adsp_cavs25: move and convert to
           HWMv2
35a97cb524 soc: xtensa: intel_adsp: HWMv2 workaround for SOF config
fdc20fdff6 soc: xtensa: intel_adsp: move and convert to HWMv2
22dc2b6391 cmake: improved board handling for revisions
2f1e33a2e6 cmake: improve arch error message for invalid arch
           selection
c47c37d3db sample: basic: blinky_pwm: Exclude rpi_pico w variant
7a788b9a18 boards: raspberry_pi: rpi_pico: Use full name for w
           variant
7046b92d41 tests: atmel_sam: adc: Fix sam4e_xpro adc build
253ee9638c tests: atmel_sam0: Update platform name
ccb4c63324 samples: atmel_sam0: Update platform name
2d4acf9230 boards: arduino_nano_33_iot: Convert to HWMv2
a60d28969a boards: arduino_mkrzero: Convert to HWMv2
0409e51d3f boards: arduino_zero: Convert to HWMv2
1b2528df1b boards: wio_terminal: Convert to HWMv2
af1096e7ca boards: ev11l78a: Convert to HWMv2
0b1db9c53d boards: adafruit_trinket_m0: Convert to HWMv2
e9874671e2 boards: adafruit_itsybitsy_m4_express: Convert to HWMv2
ba6c014071 boards: adafruit_grand_central_m4_express: Convert to
           HWMv2
33ad4a51ca boards: adafruit_feather_m0_lora: Convert to HWMv2
9812f3d54e boards: adafruit_feather_m0_basic_proto: Convert to HWMv2
c76b1fbeca boards: serpente: Convert to HWMv2
649789e433 boards: seeeduino_xiao: Convert to HWMv2
6b3bdb7364 boards: same54_xpro: Convert to HWMv2
93dda5ee4b boards: samr34_xpro: Convert to HWMv2
e48e1f5d5b boards: samc21n_xpro: Convert to HWMv2
f11cf73df1 boards: saml21_xpro: Convert to HWMv2
ac73ed6dcd boards: samd20_xpro: Convert to HWMv2
0fdbe3552e boards: samd21_xpro: Convert to HWMv2
854cff3905 boards: samr21_xpro: Convert to HWMv2
a87ea5bc0a soc: atmel: sam0: Port to HWMv2
706e5d27cd boards: riscv: neorv32: Convert to v2
d1edcdd088 soc: neorv32: Port to HWMv2
0f7add89ca boards: native_sim/posix: Add 64bit versions as variants
b6edad8d68 soc: soc_legacy: remove the arm/st_stm32 folder
c58e0822a6 boards: Convert nucleo_f207zg to HWM v2
b987093a80 soc: v2: stm32: Migrate STM32F2 series
2096fd4652 samples: bluetooth: hci_uart: Fix wrongly converted board
           names
830f9c5a82 MAINTAINERS: Update Atmel entries
527cd9d8cd CODEOWNERS: Update Atmel entries
83af7d0c1c samples: atmel_sam: Update platform name
fd9b84d457 tests: atmel_sam: Update platform name
3c72fe863c boards: arduino_due: Convert to HWMv2
37dfacbf9e boards: RoboKit1: Convert to HWMv2
1108d7b0ed boards: sam_v71_xult: Convert to HWMv2
bed44a5c28 boards: sam_e70_xplained: Convert to HWMv2
40448c5a9f boards: sam4s_xplained: Convert to HWMv2
31273692c0 boards: sam4l_ek: Convert to HWMv2
35b5d33ef0 boards: sam4e_xpro: Convert to HWMv2
3b84b9910a soc: atmel: Port SAM family to HWMv2
da00d0e7b9 boards: Convert nucleo_wba55cg to HWM v2
fb2103f89e boards: Convert nucleo_wba52cg to HWM v2
1f9a533fbc soc: st: stm32: Migrate STM32WBA series
3f92f65b28 boards: fix documentation for alientek and blues boards
7646b74aaf boards: stm32l4: doc: add zephyr_file to defconfig path
fea54ddcd9 boards: Convert adi_eval_adin2111ebz to HWM v2
d47f1878b1 boards: Convert adi_eval_adin1110ebz to HWM v2
ae42be236b boards: Convert swan_r5 to HWM v2
83bd1a9ecc boards: Convert stm32l4r9i_disco to HWM v2
39c26f09ed boards: Convert stm32l496g_disco to HWM v2
29d03c970b boards: Convert stm32l476g_disco to HWM v2
74acec315c boards: Convert sensortile_box to HWM v2
fee6d8676e boards: Convert pandora_stm32l475 to HWM v2
008b5d9392 boards: Convert nucleo_l4r5zi to HWM v2
24e357d623 boards: Convert nucleo_l4a6zg to HWM v2
2c5f9dcce0 boards: Convert nucleo_l496zg to HWM v2
4da061646f boards: Convert nucleo_l476rg to HWM v2
15956a69b8 tests: drivers: flash: stm32: update platform name
80324f7707 boards: Convert nucleo_l452re_p to HWM v2
9893e0d111 boards: Convert nucleo_l452re to HWM v2
46f92b227b boards: Convert nucleo_l433rc_p to HWM v2
ed5d1bb4cd boards: Convert nucleo_l432kc to HWM v2
325f95ec20 boards: Convert nucleo_l412rb_p to HWM v2
d055676307 boards: Convert disco_l475_iot1 to HWM v2
c7a415d92c boards: Convert b_l4s5i_iot01a to HWM v2
d15144f582 soc: st: stm32: Migrate STM32L4 series
a63ff71bcb boards: nrf_bsim: Add new nrf5340 board definitions
b53c6f412c boards: nrf_bsim: Remove redundant option setting
83eb4fc069 MAINTAINERS: intel_ish: Adjust to HWMv2 move
715685b19f boards: x86: intel_ish: move and convert intel_ish boards
           to HWMv2
5b9ef94106 soc: x86: intel_ish: move and convert to HWMv2
12b297707a boards: Convert stm32wb5mmg to HWM v2
cdcea932bc boards: Convert stm32wb5mm_dk to HWM v2
0a3ae2b223 boards: Convert nucleo_wb55rg to HWM v2
20b4ce17d5 soc: st: stm32: Migrate STM32WB series
47c65400d6 soc: st: stm32: fix stm32l0 family
59ec56f9e6 boards: Convert stm32h573i_dk to HWM v2
dc5977dbba boards: Convert nucleo_h563zi to HWM v2
a6e4928543 soc: st: stm32: Migrate STM32H5 series
99f248e048 soc: stm32u5: Fix references after conversion to hw
           modelv2
15f16834e6 boards: Convert stm32u5a9j_dk to HWM v2
c1ee449ef1 boards: Convert sensortile_box_pro to HWM v2
db4deddf9d boards: Convert nucleo_u5a5zj_q to HWM v2
2fd3ed43d2 boards: Convert nucleo_u575zi_q to HWM v2
902fceb173 boards: Convert b_u585i_iot02a to HWM v2
d716ca1a10 soc: st: Migrate stm32u5 series to new hw model
b7abc89428 hwmv2: boards: x86: doc: Adjust common docs to new
           locations
69b334f54b MAINTAINERS: Change paths to native and nrf*bsim boards
614611a528 boards: nrf*_bsim: Convert to HW model v2
5821b9ec2e board: native_sim/posix: Convert to hwmv2
04cbad174e soc: native: Convert to HWMv2
24ca0febfc boards: nrf_bsim: Fix path to pinctrl_soc.h
9a32559a2d cmake: FindHostTools: Fix for hwmv2 for host based
           targets
c4b11e0251 boards: longan_nano: port to HWMv2
97edd05be3 boards: gd32vf103c_starter: port to HWMv2
9cf624c410 boards: gd32vf103v_eval: port to HWMv2
b40bf25e5e soc: gd_gd32: reorganize folders
71600d7e95 soc: gd_gd32: move pinctrl_soc.h content back to soc
           folder
2bd84a1bc5 soc: gd_gd32: port gd32vf103 series to HWMv2
9dc342143b boards: doc: fix a bunch of broken reference
10392d693d doc: boards: split out shields
b2def8ed3a boards: acrn: fix title
bf7d3efe78 boards: riscv: tlsr9518adk80d: Convert to v2
c579770e1d soc: telink_tlsr: Port to HWMv2
9131540109 soc: stm32h7: Couple of tests fixes following migration
2efcefc089 boards: Convert stm32h7b3i_dk to HWM v2
d9b295a85b boards: Convert stm32h750b_dk to HWM v2
a2f56bdcd5 boards: Convert stm32h747i_disco to HWM v2
00314155df boards: Convert stm32h735g_disco to HWM v2
b08819dff7 boards: Convert nucleo_h7a3zi_q to HWM v2
56456c16e5 boards: Convert nucleo_h753zi to HWM v2
91f9198dc4 boards: Convert nucleo_h745zi_q to HWM v2
96f1bafbf9 boards: Convert nucleo_h743zi to HWM v2
b290f25baa boards: Convert nucleo_h723zg to HWM v2
9fbe6bf191 boards: Convert fk7b0m1_vbt6 to HWM v2
44bcfe57c7 boards: Convert arduino_portenta_h7 to HWM v2
4c86af7eae boards: Convert arduino_opta_m4 to HWM v2
b4f852f738 boards: Convert arduino_giga_r1 to HWM v2
bac9789264 soc: st: Migrate stm32h7 series to new hw model
a954e1722d boards: stm32l0: Cleanup board _defconfig files after
           migration
7e8515b241 boards: Convert ronoth_lodev to HWM v2
25246c21ef boards: Convert nucleo_l073rz to HWM v2
09396eb2e6 boards: Convert nucleo_l053r8 to HWM v2
70c004fd83 boards: Convert nucleo_l031k6 to HWM v2
e3daa98e79 boards: Convert nucleo_l011k4 to HWM v2
a2de60c6da boards: Convert dragino_nbsn95 to HWM v2
e877ce9cec boards: Convert dragino_lsn50 to HWM v2
2b50218c23 boards: Convert b_l072z_lrwan1 to HWM v2
4a65f55916 soc: st: Migrate stm32l0 series to new hw model
cc6e6be01f boards: fix few leftover ITE board references
a837303268 soc: stm32: Protect Kconfig symbols by SOC_FAMILY_STM32
88e5959f17 hwm2: Fix unit_testing: it is also a legacy board by now
95e06e8663 cmake: Fix uses of old SOC path
d517d3cc24 soc: set linker script for ra4m1
68f9aeddab soc: ite: add SOC_SERIES_ITE_IT8XXX2 guards around ITE
           options
ccf4f48f01 boards: convert ite boards to hwmv2
4a6e286a3b soc: convert ite_ec to hwmv2
12e375f826 doc: handle arch / soc / board docs in new hardware model
b4db917de9 boards: Add documentation index files
d6e0d27efe samples: bluetooth: hci_uart: Fix wrong named files
bc16a7a727 tests: Update board names for hwmv2
2834883843 boards: riscv: rv32m1_vega: Convert to v2
9c68231ba9 soc: openisa_rv32m1: Port to HWMv2
986e9619fd soc: starfive_jh71xx: Port to HWMv2
e82932e787 boards: riscv: litex_vexriscv: Convert to v2
cb9339f88f soc: litex_vexriscv: Port to HWMv2
1cd4c34654 boards: riscv: opentitan_earlgrey: Convert to v2
92eadf06b8 soc: opentitan: Port to HWMv2
a8659e170b boards: riscv: titanium_ti60_f225: Convert to v2
359133d725 soc: efinix_sapphire: Port to HWMv2
6d466429ed soc: soc_legacy: riscv: litex_vexriscv: Add updated paths
a1ff441eb3 boards: riscv: adp_xc7k_ae350: Convert to v2
ef82a8255c soc: ae350: Port to HWMv2
282204758a samples: boards: stm32: ccm: fix include path
8ca9341195 samples: basic: threads: fix broken reference
8a947f446d boards: nrf52840dk: fix rst syntax
324cb41153 boards: nordic_nrf: fix broken references
963c74df1c boards: intel_(ish|adl|ehl|rpl), up_squared: fix include
           paths
8d518ce504 boards: legacy: drop empty folders
0fef0cef5b boards: mps2: fix table formatting
e52ccc244f boards: add HWMv2 board index
c7426eca5e boards: arm: add legacy tag
1eba9d8a8f boards: acrn: create vendor folder
8d92edc727 tests: kernel: Adjust qemu_x86_tiny_768 configuration
           HWMv2
75117d1b2d scripts: ensure posix path is used with --cmakeformat
0b0384b56a maintainers: update paths after HWMv2 changes
c1b77b223d boards: arm: pan1783: Convert to v2
91a077b2ab boards: posix: nrf_bsim: Update paths
413b6c2a40 cmake: modules: configuration_files: Add board identifier
           overlay file
4f572ba24f treewide: Update board names for hwmv2
cb348c7edf boards: arm: nrf54l15pdk_nrf54l15: Convert to v2
811ad90566 boards: arm: nrf54h20pdk_nrf54h20: Convert to v2
d44ef90cf8 soc: nordic_nrf: Migrate nRF54H/nRF54L to v2 and fix nrf
c860f205de boards: arm: nrf9151dk_nrf9151: Convert to v2
fba98a1763 soc: nordic_nrf: Migrate nRF9151 to v2
5c156a2d35 boards: arm: 96b_carbon_nrf51: Convert to v2
cfc47a3a4b boards: arm: nrf9161dk_nrf9161: Convert to v2
37129b4e44 boards: arm: nrf9131ek_nrf9131: Convert to v2
a923beba5d boards: arm: bl5340_dvk: Convert to v2
d242b2703b boards: arm: raytac_mdbt53v_db_40_nrf5340: Convert to v2
9c80d4e644 boards: arm: raytac_mdbt53_db_40: Convert to v2
28268c4938 boards: arm: nrf5340_audio_dk_nrf5340: Convert to v2
33ad2b5bc6 boards: arm: thingy53_nrf5340: Convert to v2
40daa94f2d boards: arm: nrf9160_innblue22: Convert to v2
2b0dbb9d51 boards: arm: nrf9160_innblue21: Convert to v2
ee6f7697ac boards: arm: sparkfun_thing_plus_nrf9160: Convert to v2
594e4bad6b boards: arm: circuitdojo_feather_nrf9160: Convert to v2
a5803ba099 boards: arm: actinius_icarus: Convert to v2
db8c275456 boards: arm: actinius_icarus_bee: Convert to v2
30177cf53d boards: arm: actinius_icarus_som: Convert to v2
486504cf24 boards: arm: actinius_icarus_som_dk: Convert to v2
dd0672a64c boards: arm: nrf9160dk_*: Convert to v2
c1565b3d14 boards: arm: xiao_ble: Convert to v2
6dd2723314 boards: arm: qemu_cortex_m0: Convert to v2
ee1ce24a42 boards: arm: bbc_microbit: Convert to v2
1952d559f2 boards: arm: rm1xx_dvk: Convert to v2
9e12c3d8bd boards: arm: nrf51dongle_nrf51422: Convert to v2
0ffbc1da33 boards: arm: nrf51_blenano: Convert to v2
be52dfb7b6 boards: arm: nrf51_vbluno51: Convert to v2
4c29d1827f boards: arm: nrf51_ble400: Convert to v2
5b4a9556fd boards: arm: raytac_mdbt53_db_40_nrf5340: Fix typo
69e5d87a15 boards: arm: contextualelectronics_abc: Convert to v2
5e4ace1bbe boards: arm: degu_evk: Convert to v2
2762460a64 boards: arm: pan1781_evb: Convert to v2
fdc3913e76 boards: arm: ubx_evkninab1_nrf52832: Convert to v2
9c9c3a09a1 boards: arm: holyiot_yj16019: Convert to v2
109edc296f boards: arm: blueclover_plt_demo_v2_nrf52832: Convert to
           v2
7bfcdbbe8f boards: arm: decawave_dwm1001_dev: Convert to v2
0fbb543983 boards: arm: acn52832: Convert to v2
073e0f8080 boards: arm: we_proteus2ev_nrf52832: Convert to v2
197a19f396 boards: arm: ebyte_e73_tbb_nrf52832: Convert to v2
1616fc8ae5 boards: arm: nrf52_vbluno52: Convert to v2
5622077738 boards: arm: nrf52_sparkfun: Convert to v2
a6289516e4 boards: arm: 96b_nitrogen: Convert to v2
439d836883 boards: arm: nrf52_blenano2: Convert to v2
16e65f09c4 boards: arm: arduino_nicla_sense_me: Convert to v2
862efd5a21 boards: arm: thingy52_nrf52832: Convert to v2
dede0f6cd3 boards: arm: nrf52_adafruit_feather: Convert to v2
91e864ea29 boards: arm: nrf52832_mdk: Convert to v2
47ec3e416b boards: arm: ruuvi_ruuvitag: Convert to v2
52f797a227 boards: arm: pinetime_devkit0: Convert to v2
433db339f9 boards: arm: ubx_evkannab1_nrf52832: Convert to v2
a646d3f2d5 boards: arm: ubx_bmd300eval_nrf52832: Convert to v2
d0d434bf86 cmake: print identifier instead of variant
c3f5ed8157 boards: arm: we_proteus3ev_nrf52840: Convert to v2
eecff8ee7a boards: arm: nrf52840_mdk_usb_dongle: Convert to v2
34507614f6 boards: arm: nrf52840_mdk: Convert to v2
f02b56cb96 boards: arm: nrf52840_blip: Convert to v2
600c55c92a boards: arm: nrf52840_papyr: Convert to v2
f294bfc5e4 boards: arm: reel_board: Convert to v2
882524d2a0 boards: arm: nrf21540dk_nrf52840: Convert to v2
4bce0e9b39 boards: arm: nrf52840dongle_nrf52840: Convert to v2
d0229c771f boards: arm: particle_argon: Convert to v2
23a0570e64 boards: arm: particle_boron: Convert to v2
b6d3e1764f boards: arm: particle_xenon: Convert to v2
499f3e7902 boards: arm: rak5010_nrf52840: Convert to v2
9ae6b1804d boards: arm: rak4631_nrf52840: Convert to v2
fe2c90da5c boards: arm: pinnacle_100_dvk: Convert to v2
3d4d46698c boards: arm: ubx_evkninab3_nrf52840: Convert to v2
b1afbf0158 boards: arm: ubx_bmd380eval_nrf52840: Convert to v2
9f9897c872 boards: arm: ubx_bmd345eval_nrf52840: Convert to v2
f7fb2030c7 boards: arm: ubx_bmd340eval_nrf52840: Convert to v2
7186432662 boards: arm: raytac_mdbt50q_db_40_nrf52840: Convert to v2
32c4bdc0c4 boards: arm: pan1780_evb: Convert to v2
7b64c638a8 boards: arm: pan1770_evb: Convert to v2
156ee8ad8a boards: arm: mg100: Convert to v2
3d33dadeb0 boards: arm: arduino_nano_33_ble: Convert to v2
4fee7371d2 boards: arm: adafruit_itsybitsy_nrf52840: Convert to v2
ad37a0c222 boards: arm: adafruit_feather_nrf52840: Convert to v2
cf85b7169f boards: arm: bt510: Convert to v2
44b67ac430 boards: arm: bt610: Convert to v2
7dbb65d371 boards: arm: ubx_evkninab4_nrf52833: Convert to v2
5e79cb957d boards: arm: raytac_mdbt50q_db_33_nrf52833: Convert to v2
12bd83a218 boards: arm: pan1782_evb: Convert to v2
1a135ec352 boards: arm: bbc_microbit_v2: Convert to v2
4dbe97e5ea boards: arm: nrf52833dk: Convert to v2
d632b90043 boards: arm: ubx_bmd360eval_nrf52811: Convert to v2
cc1a30f24b boards: arm: we_ophelia1ev_nrf52805: Convert to v2
df0df9000b boards: arm: ubx_bmd330eval_nrf52810: Convert to v2
d2c7972a9a boards: arm: nrf52dk: Convert to v2
202c2bf447 boards: arm: bl654_sensor_board: Convert to v2
c3e36f2042 boards: arm: bl654_usb: Convert to v2
b9dd58aea1 boards: arm: bl654_dvk: Convert to v2
0e1898b093 boards: arm: bl653_dvk: Convert to v2
286f4a7524 boards: arm: bl652_dvk: Convert to v2
d1709cdb37 boards: update nRF51dk board to board scheme v2.
8f040cff2c boards: Update nrf5340dk_nrf5340 to HWMv2 scheme
8c90fae8e0 boards: update nRF52840dk_nrf52840/nrf52811 board to
           board scheme v2.
c828dcc60e boards: common: openocd-nrf5: Add HWMv2 support
c79f1b0d94 kconfig: soc: adopt Nordic SoC series to support hw model
           v2 scheme
3584b30fc1 tests: Update board names for hwmv2
94024d940e boards: arm: arty_a7: Convert to v2
8053c3a8df boards: arm: scobc_module1: Convert to v2
d5473b76fe soc: designstart: Port to HWMv2
f5792b05e7 boards: arm: fvp_baser_aemv8r_aarch32: Convert to v2
ff202daa8e soc: fvp_aemv8r_aarch32: Port to HWMv2
e66cbc2945 boards: arm: v2m_musca_s1: Convert to v2
33b47b2edb boards: arm: v2m_musca_b1: Convert to v2
baeebd31d2 soc: musca: Port to HWMv2
73b257a3f9 boards: arm: v2m_beetle: Convert to v2
85de0888ec soc: beetle: Port to HWMv2
867960a891 manifest: Update modules
6ca677ed3a boards: arm: mps2: Convert to v2
bcf4ad19d4 twister: build_dir: convert / to _ to support hwmv2
0ac386683f soc: Kconfig.v2: Add SOC_PART_NUMBER
9242c3c78f soc: stm32: soc.yml: reorder series
248d17f160 boards: stm32: cleanup
0a67265e99 boards: stm32: fix for boards with revisions
f8d44317ee soc: stm32l5: Rename overlays for nucleo_l552ze_q ns
           target.
400343d17e soc: stm32: Set default on USE_DT_CODE_PARTITION
d783ef549a soc: stm32l5: Update stm32l5 non secure targets in
           various places
643aeac552 boards: Convert stm32l562e_dk to HWM v2
e601d64344 boards: Convert nucleo_l552ze_q to HWM v2
2f7a387b32 soc: st: Migrate stm32l5 series to new hw model
519752efcd boards: xenvm: doc: Remove reference to deleted file
06263dd717 boards: xenvm: Unset HEAP_MEM_POOL_SIZE in gicv3 variant
66b0df5526 boards: qemu_cortex_a53: Fix Kconfig warnings in SMP
           variant
fa07bd9419 boards: mps3: Fix non-secure variant
8f6f0726dd boards: Move xenvm under xen
7b155a7031 boards: Raspberry Pi vendor fix
804697afa5 boards: Move 96b_aerocore to 96boards
d2f001e320 boards: x86: acrn: move and convert to HWMv2
ec7f7b3c30 tests: kernel: qemu_x86: adjust to the HWMv2
89dfcddc7e boards: x86: qemu_x86_tiny@768: change to board variant
eb724eb6a7 boards: x86: qemu_x86: optimize default HWMv2
           configurations
6f1043cde6 boards: x86: qemu_x86: move and convert to HWMv2
cab924cbfb soc: x86: ia32: move and convert to HWMv2
237fdff918 soc: x86: lakemont: move and convert to HWMv2
03042b7704 boards: move 96b_carbon to 96boards folder
767b94414e boards: rename vendor seeed to seeed_studio
07fa3a3d79 boards: Convert olimex_lora_stm32wl_devkit to HWM v2
ba01d3beca boards: Convert nucleo_wl55jc to HWM v2
7ce84f4041 boards: Convert lora_e5_mini to HWM v2
b988bae576 boards: Convert lora_e5_dev_board to HWM v2
6fbf39c726 soc: v2: stm32: Migrate STM32WL series
4a41878442 soc: st: stm32g4: add missing include
1e79ba15f6 boards: Convert weact_stm32g431_core to HWM v2
ffdcb60185 boards: Convert nucleo_g474re to HWM v2
d6acb08d3e boards: Convert nucleo_g431rb to HWM v2
90e592ffd1 boards: Convert b_g474e_dpow1 to HWM v2
eb8a7e3441 soc: st: stm32: Migrate STM32G4 series
ada469f237 tests: Update board names for hwmv2
0342433187 boards: arm: npcx9m6f_evb: Convert to v2
c10248d964 boards: arm: npcx7m6fb_evb: Convert to v2
21ddc5e6a6 boards: arm: npcx4m8f_evb: Convert to v2
5500f3ef21 soc: npcx*: Port to HWMv2
e7baf09ede soc: m48x: Port to HWMv2
5bae4a6480 boards: arm: numaker_pfm_m467: Convert to v2
3b0bd70c8c soc: m46x: Port to HWMv2
d52eab9e83 boards: Convert stm32g081b_eval to HWM v2
6f2835cb11 boards: Convert stm32g071b_disco to HWM v2
ca36d331d2 boards: Convert stm32g0316_disco to HWM v2
662cc4e09b boards: Convert nucleo_g0b1re to HWM v2
dd9bc29769 boards: Convert nucleo_g071rb to HWM v2
353da23ffb boards: Convert nucleo_g070rb to HWM v2
acc932b424 boards: Convert nucleo_g031k8 to HWM v2
cea9b140fd boards: Convert google_twinkie_v2 to HWM v2
52e025943a soc: st: stm32: Migrate STM32G0 series
1c7347686a ci: update check_compliance to not create duplicate lines
           in Kconfig
9debd98799 hwmv2: boards: up_squared_pro_700: Add missed intel_adl
           changes
adab07c42f boards: Convert msp_exp432p401r_launchxl to HWM v2
642aacdcdf soc: ti_simplelink: Add missing SoC
48637066d3 boards: Fix file paths in documentation
e983bc2a23 samples/tests: Fix mps3 board name
61e0f32716 boards: Convert stm32f3_seco_d23 to HWM v2
a1688ff641 boards: Convert stm32f3_disco to HWM v2
35fb228599 boards: Convert stm32373c_eval to HWM v2
10e5d1122b boards: Convert nucleo_f334r8 to HWM v2
c319cb19f0 boards: Convert nucleo_f303re to HWM v2
11725ccac1 boards: Convert nucleo_f303k8 to HWM v2
400f7f6a4f boards: Convert nucleo_f302r8 to HWM v2
8d84861390 soc: v2: stm32: Migrate STM32F3 series
85b9eee7e8 boards: arm: kv260_r5: Convert to v2
dafbd638e4 boards: arm: mercury_xu: Convert to v2
3ecd12f415 boards: arm: qemu_cortex_r5: Convert to v2
5db2390e9d soc: xilinx_zyncmp: Port to HWMv2
9ba8195cdc boards: arm: qemu_cortex_a9: Convert to v2
8e94b85361 boards: arm: zybo: Convert to v2
c970127fc2 soc: xilinx_zynq7000: Port to HWMv2
394c75373c boards: arm: ast1030_evb: Convert to v2
f2a1cc8714 soc: ast10x0: Port to HWMv2
28f3f25945 boards: arm: cc3235sf_launchxl: Convert to v2
c3e480f740 boards: arm: cc3220sf_launchxl: Convert to v2
fd5847123f boards: arm: beagleconnect_freedom: Convert to v2
76ba9a0587 boards: arm: cc1352p1_launchxl: Convert to v2
719baa8850 boards: arm: cc1352r1_launchxl: Convert to v2
5060a61ae1 boards: arm: cc1352r_sensortag: Convert to v2
99584be1c5 boards: arm: cc26x2r1_launchxl: Convert to v2
2dc8933942 soc: ti_simplelink: Port to HWMv2
a5b004663b scripts/utils/board_v1_to_v2.py: couple of fixes
77c2c333e5 boards: move 96b_stm32_sensor_mez to 96boards
c14ff98650 boards: stm32f411e_disco: delete obsolete file
bcdc268ccf boards: Convert stm32mp157c_dk2 to HWM v2
0c8ba92e1f boards: Convert 96b_avenger96 to HWM v2
b54fe33077 soc: v2: stm32: Migrate STM32MP1 series
2ba3639b2a boards: Convert nucleo_c031c6 to HWM v2
dbc5ed79f5 soc: st: stm32: Migrate STM32C0 series
ce6d493aa3 boards: Convert stm32l1_disco to HWM v2
a28086a9ca boards: Convert nucleo_l152re to HWM v2
1b2a511d06 boards: Convert 96b_wistrio to HWM v2
ce281f09ab soc: v2: stm32: Migrate STM32L1 series
cdb5364fd7 boards: Convert stm32f769i_disco to HWM v2
768f173dcb boards: Convert stm32f7508_dk to HWM v2
21bbbbd9cb boards: Convert stm32f746g_disco to HWM v2
bab4265693 boards: Convert stm32f723e_disco to HWM v2
58f8fe82ba boards: Convert nucleo_f767zi to HWM v2
37e9084070 boards: Convert nucleo_f756zg to HWM v2
d467e7053a boards: Convert nucleo_f746zg to HWM v2
5f2808d7cc boards: Convert nucleo_f722ze to HWM v2
bbb73e7550 soc: st: Migrate stm32f7 series to new hw model
e9094afc4d soc: st: stm32: stm32f4: change SOC_STM32F405XG to
           SOC_STM32F405XX
a1712cdd53 boards: Convert stm32f4_disco to HWM v2
5be404b365 boards: Convert stm32f469i_disco to HWM v2
baaa697ab2 boards: Convert stm32f429i_disc1 to HWM v2
69ecab3c90 boards: Convert stm32f412g_disco to HWM v2
2a572e3fb0 boards: Convert stm32f411e_disco to HWM v2
ecfbf42757 boards: Convert stm32f401_mini to HWM v2
e0191d03bb boards: Convert steval_fcu001v1 to HWM v2
4454648976 boards: Convert segger_trb_stm32f407 to HWM v2
f0ad6ee6b8 boards: Convert olimex_stm32_p405 to HWM v2
1f5e228ec8 boards: Convert olimex_stm32_h407 to HWM v2
834bdb615e boards: Convert olimex_stm32_h405 to HWM v2
8f27fa8de2 boards: Convert olimex_stm32_e407 to HWM v2
f8633a9038 boards: Convert nucleo_f446ze to HWM v2
07e0bd2c07 boards: Convert nucleo_f446re to HWM v2
24d7f625dc boards: Convert nucleo_f429zi to HWM v2
157a8cde53 boards: Convert nucleo_f413zh to HWM v2
4ec99c31b0 boards: Convert nucleo_f412zg to HWM v2
a21546140a boards: Convert nucleo_f411re to HWM v2
43f01ab6de boards: Convert nucleo_f410rb to HWM v2
60c16bcb8b boards: Convert nucleo_f401re to HWM v2
2db228d730 boards: Convert mikroe_mini_m4_for_stm32 to HWM v2
73fc26225c boards: Convert mikroe_clicker_2 to HWM v2
6b62d90114 boards: Convert google_dragonclaw to HWM v2
fa845af309 boards: Convert blackpill_f411ce to HWM v2
5c8c3c3be0 boards: Convert blackpill_f401ce to HWM v2
3c02db1290 boards: Convert blackpill_f401cc to HWM v2
7eeb723cb7 boards: Convert black_f407zg_pro to HWM v2
4f9461d068 boards: Convert black_f407ve to HWM v2
a821de8532 boards: Convert az3166_iotdevkit to HWM v2
ba580c7236 boards: Convert adi_sdp_k1 to HWM v2
eb272ddf19 boards: Convert adafruit_feather_stm32f405 to HWM v2
58ed121c3a boards: Convert 96b_stm32_sensor_mez to HWM v2
b0d70959d3 boards: Convert 96b_neonkey to HWM v2
b1088baadc boards: Convert 96b_carbon to HWM v2
18d867b0a9 boards: Convert 96b_argonkey to HWM v2
ee6ede7119 boards: Convert 96b_aerocore2 to HWM v2
b48e70ead9 soc: v2: stm32: Migrate STM32F4 series
14d2b955da cmake: convert path to CMake style before writing Kconfig
           files
9c4ac6a202 boards: posix: bsim: Update paths
14b57f56d7 tests: drivers: gpio: gpio_ite_it8xxx2_v2: Temp fix
f3b173be18 scripts: board_v1_to_v2: Update following move to
           boards_legacy
05b50f6691 cmake: CMake soc dir variable improvements for HWMv2
a188e01a12 hwmv2: move all ported boards and socs to their final
           location
22c53e97b5 hwmv2: move all non-ported legacy boards and socs to
           legacy folders
53f3b181b0 soc: ti_k3: Port to HWMv2
9f19a2075a soc: rk3568: Port to HWMv2
b8928b1628 soc: rk3399: Port to HWMv2
cda3a74868 boards: arm64: qemu_kvm_arm64: Convert to v2
70d704bd20 soc: x86: atom: move and convert to HWMv2
4789e1068e boards: x86: intel_rpl: move and convert raptor_lake
           boards to HWMv2
384307e3dc soc: x86: raptor_lake: move and convert to HWMv2
ed025df674 boards: x86: intel_ehl: move and convert elkhart_lake
           boards to HWMv2
994b6e1731 soc: x86: elkhart_lake: move and convert to HWMv2
73b30a04cf boards: x86: up_squared_pro_7000: move and convert to
           HWMv2
83b133c207 boards: x86: intel_adl: move and convert alder_lake
           boards to HWMv2
847a12f1e4 soc: alder_lake: move and convert to HWMv2
67f4c8d2a1 samples: up_squared: adjust gpio_counter to HWMv2
5326b5bfc0 boards: x86: up_squared: move and convert to HWMv2
cfd5e691b4 soc: apollo_lake: move and convert to HWMv2
ac9c235741 boards: xtensa: qemu_xtensa: Convert to v2
f198c3a761 ci: update to osource for soc/Kconfig.defconfig files
e438e6cad4 ci: add SOC_SERIES_ as false positive in
           check_compliance.py
95e34da7c1 soc: v2: Convert st_stm32 to st/stm32
313717df76 soc: mps3: Fix missing family
392c3969ed boards: arm: am62x_m4: Convert to v2
8f245d764d tests: Update board names for hwmv2
8f71bb7b4f boards: arm64: khadas_edgev: Convert to v2
e27d23aad0 soc: rk3399: Port to HWMv2
80823b860e boards: arm64: roc_rk3568_pc: Convert to v2
72e4483dec soc: rk3568: Port to HWMv2
bed94669e3 boards: arm64: phycore_am62x_a53: Convert to v2
c01af5a7b8 soc: ti_k3: Port to HWMv2
1e563b4ca3 boards: arm64: xenvm: Convert to v2
76e484adae soc: xenvm: Port to HWMv2
34412f7fe2 boards: arm64: rpi_4b: Convert to v2
9be50e2ca9 soc: bcm2711: Port to HWMv2
bbbed12c2f boards: arm64: qemu_kvm_arm64: Convert to v2
4f5ec7ff8f soc: qemu_virt_arm64: Port to HWMv2
d8d1b9f200 boards: arm64: qemu_cortex_a53: Convert to v2
30bd34b31e soc: qemu_cortex_a53: Port to HWMv2
c20d0dcbb6 boards: arm64: fvp_baser_aemv8r: Convert to v2
02ed6af463 boards: arm64: fvp_base_revc_2xaemv8a: Convert to v2
1b175003a4 soc: fvp_aemv8*: Port to HWMv2
de231b911d boards: v2: Clean up obsolete comments
aa9597f6d9 boards: Convert waveshare_open103z to HWM v2
9644828c81 boards: Convert stm32vl_disco to HWM v2
86ab2bd430 boards: Convert stm32_min_dev to HWM v2
d88d3ddcc4 boards: Convert stm32f103_mini to HWM v2
0ccc0204e1 boards: Convert stm3210c_eval to HWM v2
dd9972d782 boards: Convert olimex_stm32_h103 to HWM v2
a2c2e1406d boards: Convert olimexino_stm32 to HWM v2
2d9c62e118 boards: Convert nucleo_f103rb to HWM v2
e8ba99dc59 soc: v2: stm32: Migrate STM32F1 series
9a93916604 tests: Update board names for hwmv2
9c4d94844d boards: arm: bcm958401m2: Convert to v2
feaf4ffba1 boards: arm: bcm958402m2: Convert to v2
87f0827121 soc: bcm_vk: Port to HWMv2
4526be24a5 boards: arm: quick_feather: Convert to v2
cd921d2b97 boards: arm: qomu: Convert to v2
b3c04051fc soc: quicklogic_eos_s3: Port to HWMv2
a73a9e7533 boards: v2: Clean up obsolete comments
8d87bcc167 boards: Convert stm32f0_disco to HWM v2
1933585785 boards: Convert stm32f072_eval to HWM v2
6f9fe5429d boards: Convert stm32f072b_disco to HWM v2
9dc78e4025 boards: Convert stm32f030_demo to HWM v2
35113e8923 boards: Convert nucleo_f091rc to HWM v2
b276aee9a4 boards: Convert nucleo_f070rb to HWM v2
795f8d611b boards: Convert nucleo_f042k6 to HWM v2
2d82646443 boards: Convert nucleo_f031k6 to HWM v2
959786f12d boards: Convert nucleo_f030r8 to HWM v2
81670db2e9 boards: Convert legend to HWM v2
8980430aad boards: Convert google_kukui to HWM v2
ac020f66e0 dts: stm32f0: fix few warnings
5140e4551a boards: v2: doc: Add vendors
77d640e0c9 soc: v2: stm32: Migrate STM32F0 series
0131e1c159 soc: v2: Add st_stm32 structure and common folder
36b63787a7 boards: v2: Add documentation index for converted boards
ae02fc5047 boards: sparc: qemu_leon3: Convert to v2
f38f7bb223 boards: sparc: gr716a: Convert to v2
d3cca3580e soc: gr716a: Port to HWMv2
6a8a0c1647 boards: sparc: generic_leon3: Convert to v2
faf22185ce soc: leon3: Port to HWMv2
e94762ecdc tests: Update board names for hwmv2
9afcc27e05 boards: xtensa: qemu_xtensa: Convert to v2
3e4a17018f soc: dc233c: Port to HWMv2
9188fdcd78 boards: xtensa: xt-sim: Convert to v2
fcaa41cb5d soc: xtensa_sample_controller: Port to HWMv2
dbc413f7f7 scripts: board_v1_to_v2: Fix CONFIG_SOC_SERIES_ exclusion
6be3d4bc80 kconfig: remove Kconfig BOARD_RPI_PICO_W safe guard.
f4442fa698 boards: v2: Add documentation index for converted boards
ec5fbd67f7 boards: nios2: qemu_nios2: Convert to v2
d3ef220460 soc: nios2-qemu: Port to HWMv2
a223f284b5 boards: nios2: altera_max10: Convert to v2
c381edcb73 soc: nios2f-zephyr: Port to HWMv2
97401c7d2a boards: mips: qemu_malta: Convert to v2
e7a3243a24 soc: qemu_malta: Port to HWMv2
bec82c690d boards: v2: Add documentation index for converted boards
94f6f9b636 boards: arm: w5500_evb_pico: Convert to v2
209235ab6e boards: arm: sparkfun_pro_micro_rp2040: Convert to v2
e5b1885907 boards: arm: adafruit_qt_py_rp2040: Convert to v2
4c750818f9 boards: arm: adafruit_kb2040: Convert to v2
8d3896caa4 boards: arm: rpi_pico: Convert to v2
42cff42c42 soc: rpi_pico: Port to HWMv2
c2df4ca9cb scripts: improve yaml schema and board.yml validation for
           revisions
3970f90f71 cmake: clear BOARD_CACHE when invalid board identifier is
           given
3a70ee9ccd cmake: improve board revision handling
3cda715fae scripts: board_v1_to_v2: Don't add select
           CONFIG_SOC_SERIES_FOO
dc56a543f3 scripts: board_v1_to_v2: Add License + copyright
87147f88c4 cmake: prefer cache BOARD_IDENTIFIER over extracting from
           BOARD
65f5dc5b8c cmake: fail when board identifier is applied in legacy hw
           model
7db2b6efd8 cmake: cache BOARD_IDENTIFIER to preserve it between
           CMake invocations
85dddac5a2 scripts: using extend in list_boards for variant list
6ae5c4e7fd scripts: utils: add board v1->v2 conversion utility
ef834a12d0 maintainers: update Renesas RZT2M path
3ab7830625 boards: renesas: add documentation entry
a0c2ca0491 boards: arm: add documentation entry
27ff3654b7 boards: gigadevice: add documentation entry
6e02f43c0a maintainers: update GD32 paths
1bfcf1d974 boards: gd32l233r_eval: convert to HWMv2
6e621ee43f boards: gd32f470i_eval: convert to HWMv2
219b149768 boards: gd32f450z_eval: convert to HWMv2
91c52b0d39 boards: gd32f450v_start: convert to HWMv2
f0e0a973f6 boards: gd32f407v_start: convert to HWMv2
6f592b64c9 boards: gd32f403z_eval: convert to HWMv2
4bcb4b2ac8 boards: gd32f350r_eval: convert to HWMv2
fdc7ed6eb0 boards: gd32e507z_eval: convert to HWMv2
770376250d boards: gd32e507v_start: convert to HWMv2
a6d8b92e86 boards: gd32e103v_eval: convert to HWMv2
a5f8e5daa1 boards: gd32a503v_eval: convert to HWMv2
5ee799cc5f boards: gd32f450i_eval: convert to HWMv2
8aa8ce4ac8 soc: gigadevice: port to HWMv2
4e203c14c7 cmake: enhanced board entry file handling
312265ee04 scripts: make SoC field mandatory in board.yml
c12ae3bcbc boards: update Renesas rzt2m board.yml to contain SoC
           information
c5321c1dbe cmake: make SoC optional for boards containing a single
           SoC
bcc06c60ae scripts: support SoC list output for boards
db9e46010c twister: update testcase.yaml and sample.yaml to
           mps3/an547 identifier
a988adee7d boards: update arm mps3 an547 board to HWMv2 scheme
7dc2c9db0c soc: use HWMv2 for arm mps3 SoC
c506675b7c boards: update Renesas Starter Kit+ for RZ/T2M board to
           HWMv2 scheme
3abb792073 soc: use HWMv2 for renesas_rzt2m SoC
4f52bc646e cmake: support hw model v2 in arch/Kconfig tree
a712b5005b scripts: extend kconfig compliance to verify board / SoC
           scheme v2
baa55141a1 twister: update twister testplan.py to handle HWMv2
           boards
1f026f70eb boards: extend list_boards.py and update boards CMake
           module
bd854a3af8 cmake: introduce arch and soc cmake modules for hw model
           v2
c9edefa8fd arch: add existing archs to archs.yml for HWMv2 support
61bbfb5ba2 scripts: introduce list_hardware.py for listing of
           architectures and SoCs
a4d1980c35 build: board/ soc: introduce hw model v2 scheme

Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Signed-off-by: David Leach <david.leach@nxp.com>
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Signed-off-by: Abderrahmane Jarmouni <abderrahmane.jarmouni-ext@st.com>
Signed-off-by: Yves Vandervennet <yves.vandervennet@nxp.com>
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
 2024-03-02 16:56:33 -05:00
Samuel Kleiser 109a045e57 dts: stm32h723.dtsi: Add missing timer definitions 
Added missing timers23/timers24 definitions.

Signed-off-by: Samuel Kleiser <s.kleiser@vega.com>
 2024-02-27 14:14:27 +00:00
Gerard Marull-Paretas bf4a021fba dts: arm: nordic: nrf54l15: add missing easydma-maxcnt-bits 
Unlike SPI nodes, I2C nodes (i2c20, i2c21, i2c22 and i2c30) did not have
this required property.

Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
 2024-02-07 12:54:53 -06:00
Jose Alberto Meza b5a39b896b dts: arm: microchip: mec1501: mec172xnsz: Remove pinctrl from SoC dts 
Remove pinctrl from device tree since it is not required
when internal oscillator is used.

Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
 2024-02-06 18:56:27 +01:00
Jose Alberto Meza a0c64636e1 dts: arm: mec152x: Allow to use VCI pins as GPIOs 
Allow to VCI pins to be used as GPIOS using zephyr user device
tree node entry.

Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
 2024-02-05 14:51:44 -05:00
Daniel DeGrasse 9001512e1f dts: arm: nxp: nxp_rt1010: provide flexspi clock source 
Add FlexSPI clock source to RT1010 devicetree definition for FlexSPI
node, to match FlexSPI clock source defined on standard FlexSPI dt node
that is removed in the RT1010 devicetree.

Fixes #68488

Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
 2024-02-02 13:49:48 -06:00
Andrzej Głąbek 50d56c9503 dts: Add initial support for nRF54H20 EngA SoC 
Add definition of the nRF54H20 SoC revision EngA with its Application,
Radio, and Peripheral Processor (PPR) cores and basic peripherals:
GRTC, GPIOs, GPIOTE, and UARTs.

Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
 2024-02-02 16:40:11 +01:00
Grzegorz Swiderski 3cfa2296a6 dts: Move nrf_common.dtsi to the common directory 
... so that it can be included by ARM and RISC-V cores. For the same
reason, SysTick can no longer be disabled in this common file.

Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
 2024-02-02 16:40:11 +01:00
Linus Isberg Martinsson 23d3114db3 dts: boards: stm32h562: Add missing UART7 and UART8 
UART7 and UART8 instances were missing in the device tree for
STM32H562.

Signed-off-by: Linus Isberg Martinsson <isberg.linus@gmail.com>
 2024-02-02 09:29:18 -06:00
Manuel Argüelles 1b302f51ea soc: arm: nxp_s32: s32k1: add support for RTC 
Add support for the Real Time Clock (RTC) counter.

Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
 2024-02-02 12:43:00 +01:00
Chun-Chieh Li bc1a988f9d drivers: usb: device: support Nuvoton NuMaker series USBD controller driver 
1. Configure 'core-clock' to 192MHz to generate necessary 48MHz
2. Support workaround to disallowing ISO IN/OUT EPs to be assigned
   the same EP numbers

Signed-off-by: Chun-Chieh Li <ccli8@nuvoton.com>
 2024-02-02 10:07:43 +01:00
Daniel DeGrasse 5957da5830 dts: arm: nxp: rt1064: setup rx-clock-source for XIP flash 
Setup rx-clock-source for XIP flash. When running from RAM, the FLEXSPI2
attached SIP flash will be reconfigured, so we must ensure the
configuration used for it is valid.

Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
 2024-02-01 10:57:35 +01:00
Daniel DeGrasse f81113e948 drivers: clock_control: add support for FlexSPI reclock on NXP iMX RT10XX 
Add support for reclocking the FlexSPI on NXP iMX RT10XX. This
functionality requires an SOC specific clock function to set
the clock rate, since the FlexSPI must be reset directly
before applying the new clock frequency.

Note that all clock constants are defined in this commit, since the
memc flexspi driver now depends on a clock node being present.

Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
 2024-02-01 10:57:35 +01:00
Gerard Marull-Paretas ed0fc03f67 dts: bindings: arm: nordic,nrf-ficr: add #nordic,ficr-cells 
Add a new #nordic,ficr-cells property, so that we can specify a FICR
offset in a phandle-array, e.g.

  nordic,ficrs = <&ficr 0xff>;

Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
 2024-01-31 13:40:59 +00:00
Witold Lukasik 0b2ed9888a dts: arm: nordic: add support for Nordic nRF54L15 
Add dts files for nRF54L15 chip.

Signed-off-by: Witold Lukasik <witold.lukasik@nordicsemi.no>
 2024-01-30 21:00:44 +00:00
Andriy Gelman c7dab3df08 drivers: can: Add xmc4xxx CAN support 
Adds CAN drivers for XMC4xxx SoCs.

XMC4xxx has multiple CAN nodes. The nodes share a common clock and
a message object pool.

The CAN nodes do not have a loopback mode. Instead there is an
internal bus which can be used to exchange messages between
nodes on the SoC. For this reason tests/samples which rely on the
loopback feature have been disabled.

Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
 2024-01-30 19:06:06 +01:00
Guillaume Gautier 7ba1f2e6d8 dts: arm: stm32wba: add standby mode to device tree 
Add standby mode to device tree

Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
 2024-01-30 18:01:00 +01:00
Aymeric Aillet 4b8c0559d6 dts: arm: renesas: Move rz dtsi to range folder 
Create a folder for RZ Renesas range device tree to follow how it's
done for other renesas ranges.
It will also help to better delimit areas to maintain.

Signed-off-by: Aymeric Aillet <aymeric.aillet@iot.bzh>
 2024-01-30 09:59:54 +01:00
Sharad Patil 517574ac90 dts: arm: silabs: Add Support for Silabs MG12 BRD4161A board 
Added support in board directory for EFR32 MG12 BRD4161A board

Signed-off-by: Sharad Patil <p.sharad@capgemini.com>
 2024-01-30 08:46:25 +01:00
Erwan Gouriou b772e366c9 dts: stm32u5: Add SW/JTAG debug port node 
Provide jtag port pins description, so they can be used to be set in
analog mode when not required to save power (around 40uA saved in total).

Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
 2024-01-26 15:52:38 +00:00
Jan Bylicki 6400e3f437 drivers: pinctrl: Add ZynqMP / Mercury XU pinctrl support 
Add a pinctrl driver for the ZynqMP SoC and the
Mercury XU board powered by it.

Signed-off-by: Jan Bylicki <jbylicki@antmicro.com>
 2024-01-26 12:47:11 +01:00
Richard Wheatley c6f21b2017 boards: arm: apollo4p_evb Shield Support 
Correct pinctrl for rev2 board.
Rename IOM properly in ambiq_apollo4p.dtsi

Signed-off-by: Richard Wheatley <richard.wheatley@ambiq.com>
 2024-01-26 12:36:40 +01:00
Manuel Argüelles f38b01c7ac soc: arm: nxp_s32: s32k1: enable watchdog driver 
Enable on-chip watchdog driver support for S32K1 devices.

Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
 2024-01-25 18:26:25 +00:00
Adrien MARTIN c1ae6e5b4e soc: stm32g0: add fdcan2 
The STM32G0 soc has 2 CAN controllers. The 2nd on was not working
with zephyr yet as both controllers shares the same IRQ. Recently, the
shared irq system was integrated on now, both can controllers can work
on this chip. Shared interrupts must be enabled only if both can
controllers are enabled.

Signed-off-by: Adrien MARTIN <adrienmar@kickmaker.net>
 2024-01-25 16:01:40 +00:00
Sateesh Kotapati a03c1ace6b gecko: service files updated | Update to GSDK 4.4.0 
Updated the files present in device_init, hfxo_manager, power_manager
and sleeptimer folder as per latest version of gecko_sdk.
Added SL_DEVICE_INIT_HFXO_PRECISION in sl_device_init_hfxo_config.

Signed-off-by: Sateesh Kotapati <sateesh.kotapati@silabs.com>
 2024-01-24 13:23:00 +01:00
Bjarki Arge Andreasen b6c1bf8225 drivers: flash: sam: Use interrupt to sync 
Use interrupt to wait for flash controller to finish
its command and become ready.

Signed-off-by: Bjarki Arge Andreasen <bjarkix123@gmail.com>
 2024-01-23 15:22:26 +00:00
Bjarki Arge Andreasen 6f28ea08a5 atmel: sam: flash: Add flash pages property 
This commit adds layput page cells to the atmel sam flash
controller and the flash node. These allow for describing
the actual flash page layout of each soc, allowing the
flash driver to fully utilize the capabilities of the
flash.

With this update, we unlock the following capabilties:
  - utilize 2048 erase block size for small sectors
  - utilize 16384 erase block size for large sectors

Signed-off-by: Bjarki Arge Andreasen <bjarkix123@gmail.com>
 2024-01-23 15:22:26 +00:00
Ryan McClelland 83c298cd32 drivers: spi: dw: define max-xfer-size 
The max size was determined by looking at the ARCH of the cpu. This really
comes from the ip configuration when generated. Add `max-xfer-size`
property to the devicetree.

Signed-off-by: Ryan McClelland <ryanmcclelland@meta.com>
 2024-01-20 13:11:42 +01:00
Daniel DeGrasse 9a14bece20 dts: arm: nxp_rt5xx: add definition of the DMIC to devicetree 
Add definition of the DMIC to the RT5xx devicetree, including all
PDM channels.

Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Co-authored-by: Yves Vandervennet <yves.vandervennet@nxp.com>
 2024-01-17 14:43:52 +01:00
Cong Nguyen Huu 9eb0a554f9 drivers: nxp_s32_canxl: add support RX FIFO 
Driver supports both CAN classic and CAN FD frames
when using RX FIFO mode

Signed-off-by: Cong Nguyen Huu <cong.nguyenhuu@nxp.com>
 2024-01-16 20:50:49 -05:00
Andrzej Kuros 728f0ec7be dts: nrf5340: add missing easydma-maxcnt-bits for nrf5340_cpunet 
The required property `easydma-maxcnt-bits` was missing for
nrf5340_cpunet.

Signed-off-by: Andrzej Kuroś <andrzej.kuros@nordicsemi.no>
 2024-01-15 13:55:06 -05:00
Aaron Ye ca8ee0e029 boards: arm: apollo4p_blue_kxr_evb: Move the bt-spi instance to soc dts 
Since the pins of bt-spi instance are wired internally in the chip, it will
make sense to move the definition to soc dts so no need for every board
using the chip to redefine the same.

Signed-off-by: Aaron Ye <aye@ambiq.com>
 2024-01-15 09:34:40 +00:00
Mahesh Mahadevan 008b5027a6 dts: nxp: Add support for 1Kz RTC counter 
A 1KHz counter is present in the LPC RTC.
Add support for this counter to get better
resolution for certain applications.

Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
 2024-01-12 13:34:19 +01:00
Jun Lin a897b8a09c drivers: spi: npcx: add driver for the SPI peripheral 
This commit adds the driver support for the NPCX SPI peripheral.

Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
 2024-01-11 10:04:21 +01:00
Gerard Marull-Paretas 0f73e8fd3e dts: arm/riscv: gigadevice: s/gigadevice/gd 
To stay consistent with other vendors, use vendor prefix (gd).

Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
 2024-01-10 20:59:21 -05:00
Henrik Brix Andersen c9263db28f drivers: can: bosch: mcan: use int0 and int1 as interrupt names 
Consistently use "int0" and "int1" as interrupt names for CAN controllers
based on the Bosch M_CAN IP core. This aligns with the upstream Linux
bindings.

Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
 2024-01-09 18:28:30 +01:00
Andriy Gelman 2837f4f182 drivers: ethernet: Add xmc4xxx ethernet/PTP drivers 
Adds ethernet/PTP drivers for xmc4xxx SoCs.

Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
 2024-01-09 10:00:47 +01:00
Andriy Gelman d540407fc8 drivers: mdio: Add xmc4xxx mdio drivers 
Add mdio drivers for xmc4xxx SoCs.

Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
 2024-01-09 10:00:47 +01:00
Andriy Gelman 201167bdb1 dts: xmc4700_F144x2048: Merge dsram regions and use it as RAM 
This is in preparation for xmc4xxx mdio/ethernet patch set. In the
ethernet drivers, the DMA memory (including descriptor and buffers)
must live in dsram1 or dsram2.

Currently, in xmc47_relax_kit the RAM is the psram1 region meaning
that DMA transfers will not work. Switch to using dsram regions instead.
Also, merge dsram1 and dsram2 into a single region since they are
contiguous.

Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
 2024-01-09 10:00:47 +01:00
Jun Lin 34b9b3aaca dts: npcx: sha: fix the incorrect unit address 
Fix the incorrect unit address of sha node from 13C to 148 to avoid
the build warning.

Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
 2024-01-08 16:17:17 +00:00
Manuel Argüelles 58f5720eb4 dts: arm: nxp: add FlexCAN support for S32K1xx 
S32K1xx devices have a maximum of 3 FlexCAN peripherals. Each part may
define a different maximum number of instances and message buffers,
hence the interrupt lines are defined in the part specific dts.

Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
 2024-01-08 08:30:49 -06:00
Jakub Zymelka dfbcc8911a dts: arm: add new gpiote instances definition 
Added GPIOTE0, GPIOTE1 instances for legacy devices,
GPIOTE20, GPIOTE30 for Moonlight and GPIOTE130,
GPIOTE131 instances for Haltium.

Signed-off-by: Jakub Zymelka <jakub.zymelka@nordicsemi.no>
 2024-01-08 11:19:37 +01:00
Manuel Argüelles aeebe484f2 soc: arm: nxp_s32: s32k1: add FlexTimer support 
Add support for FlexTimer (FTM) module on S32K1xx devices.

Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
 2024-01-05 09:03:00 +01:00
Ian Morris 74468ebc09 dts: arm: renesas: ra: fix incorrect node name for sci devices 
The sci devices described in the device tree source for RA MCUs are
incorrectly specified as being UARTs when they should be SCIs (serial
communication interfaces) which can not only operate as UARTs but also
as I2C, SPI etc.

Signed-off-by: Ian Morris <ian.d.morris@outlook.com>
 2024-01-04 21:51:35 +00:00
Emil Lindqvist ed6da68f5b i2s: stm32h7: add i2s support for stm32h7 mcu family 
This commit modifies the I2S driver to work for STM32H7
family of MCU's. Currently only TX is working.

Tested on nucleo_stm32h743zi. Requires dma1 & dmamux1 to be enabled.

Signed-off-by: Emil Lindqvist <emil@lindq.gr>
 2024-01-04 13:48:28 +01:00
Hake Huang 3d783166f8 dts: fix frdm_kw41z ram size issue 
frdm_kw41z ram size is 96k not 128k(starting from 0x20000000)

fixing: #66154

Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
 2024-01-04 09:42:39 +01:00
cyliang tw 9ad8e1ab74 drivers: adc: support Nuvoton numaker series 
Add Nuvoton numaker series adc controller, including async read feature.

Signed-off-by: cyliang tw <cyliang@nuvoton.com>
 2024-01-02 10:10:27 +01:00
Daniel DeGrasse beb43bdf20 soc: arm: nxp: add MK22F12 definition 
Add SOC definition for MK22F12 series, larger LQFP-144 K22 series
parts that feature additional peripheral instances.

Additionally, these parts differ from the standard MK22 in the following
ways:
- SYSMPU peripheral is present, so an MPU definition is required
- No external oscillator divider is present

This commit also updates the NXP HAL to include pin control files for
these SOCs.

Signed-off-by: Daniel DeGrasse <daniel@degrasse.com>
 2023-12-23 10:00:36 +00:00
Francois Ramu 800edb2b69 dts: arm: stm32f7 declares sram0 as zephyr, memory-region 
Declare the SRAM0 region as memory-region
for the stm32f745 serie. Will be included for the stm32f746
for the stm32f765 serie. Will be included for the stm32f767
for the stm32f722 serie. Will be included for the stm32f723

Signed-off-by: Francois Ramu <francois.ramu@st.com>
 2023-12-22 09:53:39 +01:00
TOKITA Hiroshi 4dde6dc0f1 dts: arm: renesas: ra: Enable built-in clock by default 
The hoco, moco, and loco are always available.
Enable these by default.

Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
 2023-12-22 09:52:50 +01:00
Aaron Ye 5f83c3fe4d dts: arm: ambiq: Use DT_FREQ macro for frequency configuration. 
This commit updates the Ambiq Apollo4x series soc clock frequency
of defined instances to align with context of these dts files.

Signed-off-by: Aaron Ye <aye@ambiq.com>
 2023-12-21 17:17:11 +00:00
Andrei-Edward Popa ea1cafbee7 drivers: clock_control: Added clock driver for Raspberry Pi Pico 
Added clock driver for Raspberry Pi Pico platform

Signed-off-by: Andrei-Edward Popa <andrei.popa105@yahoo.com>
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
 2023-12-20 11:14:24 +01:00
Erwan Gouriou 79e55c2a04 dts: wba: configure HSI16 as RNG clk source 
We might have to do this differently:
Configure rng default clock in .dtsi
Set board specific config in .dts

Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
 2023-12-18 17:31:08 +00:00
Erwan Gouriou 2c88daab3b dts: stm32wba: Define SRAM6 as RAM_NOCACHE 
SRAM6 is used by RF and should be defined as RAM_NOCACHE
to allow unaligned access reads.
"IO" might be a better match but is not available on this arch.

Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
 2023-12-18 17:31:08 +00:00
Tom Chang 4dc7c89f40 drivers: espi: npcx: introduce espi taf driver 
This CL implements espi taf read/write/erase function for NPCX.

Signed-off-by: Tom Chang <CHChang19@nuvoton.com>
 2023-12-18 09:30:01 +01:00
Evan Perry Grove a54a52b085 dts: arm: Add support for STM32F722 SoC 
The STM32F722 is similar to the STM32F723, but lacks the latter's
more advanced USB PHY. Otherwise, they are virtually identical.

Signed-off-by: Evan Perry Grove <evan@4grove.com>
 2023-12-13 13:57:55 +01:00
Alexis LECOQ 7c3853537e dts: boards: stm32h562: Adding USART11 
This commit is enabling the USART11 for STM32H562/563 boards.

Signed-off-by: Alexis LECOQ <alexis.lecoq@hidglobal.com>
 2023-12-13 09:41:57 +01:00
Sebastian Schlupp c2c05ff7e7 dts: arm: atmel: same5x: added CAN(0 and 1) peripheral description 
Added default parameters for CAN peripherals according to the datasheet.

Signed-off-by: Sebastian Schlupp <sebastian.schlupp@gmail.com>
 2023-12-12 16:25:46 +01:00
Benedikt Schmidt 4ba3aedfed dts: arm: st: add SMBus devices 
Add SMBus devices to all SoCs which have either
a st,stm32-i2c-v1 or st,stm32-i2c-v2.

Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
 2023-12-12 10:57:41 +01:00
Jun Lin fde31c03c5 driver: crypto: SHA: npcx: fix SHA driver for npcx4 QS chip 
The commit fixes the SHA driver because the ROM API has the following
changes from ES to QS chip:
1. base addres: from 0x13c -> 0x148
2. required SHA context buffer size : from 228 -> 240 bytes

This change also adds a check for the pre-allocated buffer size of the
SHA context when the driver initiliazes.

Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
 2023-12-12 09:52:04 +00:00
Maximilian Deubel 84f4ffce7c soc: arm: nordic_nrf: nrf91: add nRF9151 LACA 
This patch adds definitions for the nRF9151,
which is software-compatible with nRF9161.

Signed-off-by: Maximilian Deubel <maximilian.deubel@nordicsemi.no>
 2023-12-11 10:24:50 +01:00
Mateusz Karlic 6c9ff66e5f dts: arm: ambiq: Add SoC compat string 
Add `compatible` node to Ambiq SoCs, along with secondary common compat,
since they share many similarities.

Signed-off-by: Mateusz Karlic <mkarlic@antmicro.com>
 2023-12-11 09:56:48 +01:00
Manuel Argüelles 18202d0db3 soc: nxp: s32k146: add LPSPI support 
Add LPSPI nodes to S32K1xx devices.

Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
 2023-12-06 20:57:42 -06:00
Manuel Argüelles 3b354bfc57 soc: nxp: s32k146: add LPI2C support 
Add LPI2C nodes to S32K1xx devices. S32K146 has a single
LPI2C instance.

Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
 2023-12-06 20:57:42 -06:00
Sumit Batra e0dc6f4fe4 drivers: sensor: qdec_s32: Add QDEC support for S32 
Add code to configure and program Lcu, Trgmux and Emios_Icu IPs to
get the the rotations by the motor in radians.

Co-authored-by: Benjamin Perseghetti <bperseghetti@rudislabs.com>
Co-authored-by: Peter van der Perk <peter.vanderperk@nxp.com>
Co-authored-by: Mayank Mahajan <mayankmahajan.x@nxp.com>
Signed-off-by: Sumit Batra <sumit.batra@nxp.com>
 2023-12-06 20:06:37 -06:00
Aaron Ye 1b3d29c53e dts: arm: ambiq: Add GPIO instances to Apollo4 Blue Plus SoC 
This commit instantiates the GPIO peripherals.
Also enables GPIO instances for apollo4p_blue_kxr_evb.

Signed-off-by: Aaron Ye <aye@ambiq.com>
 2023-12-06 12:11:30 +00:00
Erwan Gouriou 3bbc2cc9e1 dts: stm32wba: Introduce stm32wba55Xg package 
Based on stm32wba55, stm32wba55Xg is similar from device tree description
to stm32wba52Xg.

Take the opportunity to fix stm32wba52Xg descriuption scheme which was
missing stm32wba52.dtsi.

Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
 2023-12-05 14:53:39 +00:00
Jamie McCrae 3d3b287b79 dts: arm: nordic: nrf53/nrf91: Fix GPREGRET register addresses 
Fixes an issue with the register addresses which was caused by a
missing `ranges;` option for the power peripheral

Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
 2023-12-05 10:23:12 +00:00
Francois Ramu a65ebbd6bc dts: arm: stm32f7 vref calibration address fixed 
This PR set the correct value for the stm32F7 devices.
And change vrefint-cal-addr to <0x1FF07A2A> for stm32F722-F723
soc serie.

Signed-off-by: Francois Ramu <francois.ramu@st.com>
 2023-12-04 14:46:54 +01:00
Aaron Ye 70ce5e4c6b dts: arm: ambiq: Update the GPIO instances 
Use the "ambiq,gpio" binding to combine the "ambiq,gpio-bank"
child nodes for Apollo4 Plus soc.
Also update the GPIO driver accordingly.

Signed-off-by: Aaron Ye <aye@ambiq.com>
 2023-12-01 16:25:47 +01:00
Mateusz Sierszulski e0eadd5f6b dts: arm: ambiq: Add GPIO instances to SoC 
This commit instantiates the GPIO peripherals.

Signed-off-by: Mateusz Sierszulski <msierszulski@antmicro.com>
 2023-12-01 16:25:47 +01:00
HaiLong Yang ba476c4b8a drivers: flash: update gd32 fmc v2 
This fix some incorrect implement in gd32 flash v2 driver, also add
support to gd32a503 series.

Signed-off-by: HaiLong Yang <hailong.yang@brainco.cn>
 2023-12-01 10:51:52 +00:00
Wilfried Chauveau 5b3d4598a7 dts: arm: Blanket remove all usages of arm,num-mpu-regions 
This removes all occurrences of arm,num-mpu-regions relying on the value
reported by the register instead.
A user may still define this property if they need to have a compile time
definition for it.

Signed-off-by: Wilfried Chauveau <wilfried.chauveau@arm.com>
 2023-12-01 10:48:00 +00:00
Manuel Argüelles 81de2af68f dts: arm: introduce support for NXP S32K146 
Add minimal support for S32K146 devices including clocks, MPU,
pin control, GPIO and UART.

Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
 2023-11-30 11:21:59 -05:00
Patryk Koscik 77b49ab587 dts: arm: rpi_pico: Add compat string to rp2040 
This commit adds compatible string to the `rp2040` SoC node.

Signed-off-by: Patryk Koscik <pkoscik@antmicro.com>
 2023-11-30 10:01:54 +01:00
Daniel DeGrasse 9e4b57398f dts: arm: nxp: rt1015: correct FlexRAM bank allocation 
Although the RT1015 only supports 128 KB of FlexRAM being used at once, the
default fusemap overallocates 160KB of FlexRAM. The JLink flashloader
algorithm appears to rely on the 64KB of DTCM in the default fusemap
being configured. Reducing the DTCM allocation resulted in JLink
failing to flash the SOC.

To resolve this, utilize the default fusemap of {O, O, D, D, I} for the
RT1015 FlexRAM setup. Add a note about the restrictions on using
overallocated FlexRAM to the SOC DTSI.

Fixes #65889

Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
 2023-11-29 11:21:40 -06:00
Benjamin Perseghetti 0fa204b9fd drivers: net: phy: add tja1103 
Adds the tja1103 enet phy for setting phy options on the mr_canhubk3.

Co-authored-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Co-authored-by: Peter van der Perk <peter.vanderperk@nxp.com>
Signed-off-by: Benjamin Perseghetti <bperseghetti@rudislabs.com>
 2023-11-28 08:07:44 -06:00
Jun Lin 91fdef0783 soc: npcx: add support for npcx9mfp 
Add new SoC npcx9mfp support for npcx9 series.

Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
 2023-11-28 09:13:23 +00:00
cyliang tw dfff1107b8 drivers: i2c: support for Nuvoton numaker series 
Add Nuvoton numaker series I2C controller feature.
Support dual role and at most one slave at one time

Signed-off-by: cyliang tw <cyliang@nuvoton.com>
 2023-11-27 14:34:15 +00:00
Yonatan Schachter e3520c6813 dts: rp2040: Fix num-irq-priority-bits 
The number of IRQ priority bits was incorrectly set to 3 instead
of 2, which is the correct number for Cortex-M0+.

Signed-off-by: Yonatan Schachter <yonatan.schachter@gmail.com>
 2023-11-27 12:22:47 +00:00
Kacper Dalach 82d7535b19 dts: st: Add cpu node labels 
After porting from h5 to f7 i noticed that not all mcus have
cpu node labels. Added cpu0 node labels to all stm32 dts.

Signed-off-by: Kacper Dalach <dalachowsky@gmail.com>
 2023-11-27 12:21:19 +00:00
Francois Ramu c3940cb4f7 Revert "dts: arm: stm32u5 family has a x2 factor on its LPTIM clock" 
This reverts commit 823b0e6016.

Signed-off-by: Francois Ramu <francois.ramu@st.com>
 2023-11-27 12:18:41 +00:00
Aymeric Aillet cfb93c1c82 dts: arm: Add Renesas r8a779f0 support 
r8a779f0 is also know as S4, this SoC is part of the Gen4 SoC series,
has 8 Cortex-A55 and a dual core lockstep Cortex-R52 processor.

SCIF0 is dedicated to Zephyr and SCIF3 to Linux.

**Control Domains**
IMPORTANT: This SoC is divided into two "domains":
- Application domain contains some peripherals as well as A55 & R52 cores.
- Control domain that contain a G4MH/RH850 MCU and other peripherals.

In order to access control domain peripherals such as gpio4-7 and CAN-FD
from application domain, the G4MH MCU has to unlock a protection
mechanism from control domain buses.

"Protected" controllers will be flagged in gen4 device trees,
warning users that they need to flash a custom G4MH firmware
to unlock access to these controllers.

**Clock controller**
This SoC clock controller is offering "domains"
for each world (Zephyr/Linux).

These domains are several "entry points" to the clock controller
which are arbitrated to avoid a world from turning off a clock needed
by another one.

We decided to use the same domain as Linux because the
security mechanism as to be implemented before accessing
another domain.

Signed-off-by: Aymeric Aillet <aymeric.aillet@iot.bzh>
 2023-11-25 08:50:47 -05:00
Jun Lin ba38a54faa dts: npcx: shi: support two version of shi hardware 
The shi module in npcx4 supports the enhanced buffer mode.
Add a new compatible string "nuvoton,npcx-shi-enhanced" for it.
Then the shi driver can determine if it should use the enhanced buffer
mode based on the compatiable string.

Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
 2023-11-24 11:45:13 +01:00
Martin Gritzan 86cf5829a4 dts: arm: stm32: add stm32f303xb bindings 
The STM32F303xB is very similar to the xC, the only difference being the
RAM and flash sizes.

Signed-off-by: Martin Gritzan <martin.gritzan@gmail.com>
 2023-11-24 09:24:14 +01:00
Jerzy Kasenberg 46bbe052d3 drivers: regulator: add LDO/DCDC support for Smartbond. 
This add regulator driver for Smartbond DA1469X SOC.
Driver can control VDD, V14, V18, V18P, V30 rails,
full voltage range supported by SOC is covered.
For VDD, V14, V18, V18P DCDC can be configured.

Special VDD_CLAMP (always on) and VDD_SLEPP are added
to allow configuration of VDD in sleep modes.

Signed-off-by: Jerzy Kasenberg <jerzy.kasenberg@codecoup.pl>
 2023-11-22 14:55:16 +00:00
Dawid Niedzwiecki 3387c57a94 dts: stm32f4: set RTC as idle timer by default 
Only RTC can be used as the idle timer for cortex-m systick. Set the
chosen node as RTC by default.

The idle timer will be enabled only if PM management is set.

Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
 2023-11-22 09:28:53 +00:00
Erwan Gouriou c6bba39f4d dts: stm32wl: Configure LPUART wakeup line 
Rather than configuring in serial_wakeup sample, define LPUART1 wakeup
line in wl.dtsi file.

Additionally make few cosmetic changes to nucleo_wl55rj overlay in
serial wakeup sample.

Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
 2023-11-21 14:22:22 +01:00
Dawid Niedzwiecki 43ef398614 pm: add power management for stm32f4x 
Add soc power management for the STM32F4x chips.

One low power state is added supported by all chips from the family -
the Stop mode with voltage regulator in low-power mode.

The Stop mode for STM32F chips has to work with the IDLE timer -
CORTEX_M_SYSTICK_IDLE_TIMER, because PLL and HSI are disabled in the
Stop mode (Systick is not clocked). The only possible wakeup source is
RTC, which works as a IDLE timer for the Systick.

The exit latency may need to be adjusted per system, depending on the
system tick frequency and other variables.

Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
 2023-11-21 08:46:17 +00:00
Abderrahmane Jarmouni aeb1e8ed34 dts: arm: st: add STM32U5A9 support 
add STM32U5A9XJ device trees. Also add ADC2 & ADC1_2 dual mode nodes

Signed-off-by: Abderrahmane Jarmouni <abderrahmane.jarmouni-ext@st.com>
 2023-11-21 08:44:34 +00:00
Adrien Bruant 176d433b98 drivers: bbram: stm32-bbram: port to stm32wl 
On STM32WL, the backup memory is defined as part of the TAMP peripheral.
This seems to be a deviation from the stm32 family where this memory is
defined as part of the RTC.

The STM32WL reference manual shows that tamp_pclk is connected to
rtc_pclk. This means that the clock required to run the TAMP peripheral
is the same as the RTC's. A quick port of BBRAM on STM32WL is achieved
by instanciating the bbram device as a child of the RTC and by modifying
the address offset to the first backup register from the rtc base
address.

Signed-off-by: Adrien Bruant <adrien.bruant@aalberts-hfc.com>
 2023-11-21 08:40:51 +00:00
Franciszek Zdobylak 1d01f5c6b9 dts: arm: silabs: Move gpio gecko header include 
Move the include to places where it is actually used.

Signed-off-by: Franciszek Zdobylak <fzdobylak@antmicro.com>
 2023-11-20 13:02:49 +01:00
Franciszek Zdobylak 6f91fd858c dts: arm: silabs: Configure hfxo in dtsi 
This commit moves configuration of hfxo from headers defined on board level
to device trees of SoCs.

Signed-off-by: Franciszek Zdobylak <fzdobylak@antmicro.com>
 2023-11-20 13:01:39 +01:00
Gabriel Freitas eaec581fb9 boards: arm: add toradex verdin imx8m plus board 
Add Verdin iMX8M Plus board with i.MX8MP SoC and ARM Cortex-M7 processor.
Add two targets (DDR and ITCM) for the iMX8M Plus board.
Port and documentation are based on NXP MIMX8MM EVK board.
This code is intented to be used with the Cortex-M7.

Signed-off-by: Gabriel Freitas <gabriel.freitas@toradex.com>
 2023-11-16 09:25:53 +01:00
Gabriel Freitas eceb27c6c8 dts: add support for uart1 usage on imx8ml_m7 devicetree include file 
Add support for UART1 usage by adding uart1 node and configuration
to the i.MX 8ML devicetree include.

Signed-off-by: Gabriel Freitas <gabriel.freitas@toradex.com>
 2023-11-16 09:25:53 +01:00
Jakub Michalski 9265d2de0c drivers: gpio: add rzt2m gpio driver 
Add Renesas rzt2m gpio driver with basic functionality.
It supports pin mode configuration and writing/reading to/from gpio ports.
Includes dts changes to build blinky sample.

Signed-off-by: Jakub Michalski <jmichalski@internships.antmicro.com>
 2023-11-15 11:41:35 +01:00
Wojciech Sipak 9e44f59e9a drivers: pinctrl: add RZT2M driver 
This adds a new driver for Renesas RZ/T2M.
The driver allows configuration of pin direction,
pull up/down resistors, drive strength and slew rate,
and selection of function for a pin.

Signed-off-by: Wojciech Sipak <wsipak@antmicro.com>
 2023-11-15 11:41:35 +01:00
Wojciech Sipak 4e35d0e354 drivers: serial: add RZT2M uart driver 
This adds a UART driver for the Renesas RZ/T2M
Serial Communication Interface.
The driver implements:
* Polling API,
* Interrupt-driven API.

Signed-off-by: Wojciech Sipak <wsipak@antmicro.com>
 2023-11-15 11:41:35 +01:00
Wojciech Sipak b1c83c0335 soc: Add support for RZ/T2M 
This adds a new SoC: SOC_RENESAS_RZT2M
and a new board: rzt2m_startek_kit

Signed-off-by: Wojciech Sipak <wsipak@antmicro.com>
Co-authored-by: Roman Dobrodii <rdobrodii@antmicro.com>
 2023-11-15 11:41:35 +01:00
Charles Dias d15f5bbcc7 dts: arm: st: h7: add support for stm32h7b0 
Add device tree support for STM32H7B0 line.

Signed-off-by: Charles Dias <charlesdias.cd@outlook.com>
 2023-11-15 10:02:06 +01:00
Declan Snyder 2d1fdb5586 soc: nxp: rt1xxx: Enable NXP FlexRAM 
Enable NXP FlexRAM in DTS and SOC code.

Do not configure flexram at runtime if the code is in the RAM.

Fix RT1060 DT to be more accurate.

Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
 2023-11-13 09:42:28 +01:00
Daniel Schultz 474bbd12e9 dts: arm: ti: am62x_m4: Add gpio0 node 
The M4F subsystem has a dedicated GPIO controller with 24 available
pins. Add the node definition for the recently added driver.

Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
 2023-11-13 09:42:11 +01:00
Nick Kraus 5bd18886e9 sam: mdio: Fix Transfer Timeout at Initialization 
Initialize the MDIO peripheral clock (normally done during GMAC
initialization) before trying any MDIO transfers, preventing startup
errors.

Signed-off-by: Nick Kraus <nick@nckraus.com>
 2023-11-10 10:42:26 +01:00
Declan Snyder fef0018cca soc: lpc55xxx: Support, enable, test NXP MRT 
Support NXP MRT on LPC55XXX SOC series, enable on
lpcxpresso55s69_cpu0, add test overlay to counter basic api test

Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
 2023-11-10 10:40:54 +01:00
Declan Snyder 93c59793c2 soc: rt6xx: Add NXP MRT 
Add NXP MRT to RT6xx DT definition and add peripheral reset to soc.c

Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
 2023-11-10 10:40:54 +01:00
Declan Snyder ff83745c9a soc: rt5xx: Enable NXP MRT 
Enable NXP MRT on RT5xx soc and MIMXRT595_EVK board

Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
 2023-11-10 10:40:54 +01:00
Manuel Argüelles 1572ea16fc drivers: can: nxp_s32_canxl: use instance-based DT macros 
At present, many of the NXP S32 shim drivers do not make use of
devicetree instance-based macros because the NXP S32 HAL relies on an
index-based approach, requiring knowledge of the peripheral instance
index during both compilation and runtime, and this index might not
align with the devicetree instance index.

The proposed solution in this patch eliminates this limitation by
determining the peripheral instance index during compilation
through macrobatics and defining the driver's ISR within the shim
driver itself.

Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
 2023-11-09 18:22:01 +01:00
Declan Snyder 345f079e49 dts: bindings: Fix NXP USB bindings 
NXP USB bindings were combined into one binding and using
a property corresponding to HAL enums which is improper use
of devicetree.

Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
 2023-11-09 15:34:39 +01:00
William MARTIN 56395ec42f dts: arm: st: Update stm32l496.dtsi 
Add missing master-can-reg into stm32l496.dtsi

Signed-off-by: William MARTIN <william.martin@muxen.fr>
 2023-11-09 11:22:48 +01:00
Ioannis Karachalios dd1371da8b dts: renesas: smartbond: Support the DMA engine. 
Update DTS and board configurations to support the DMA accelerator.

Signed-off-by: Ioannis Karachalios <ioannis.karachalios.px@renesas.com>
 2023-11-09 10:17:29 +00:00
Fabio Baltieri 9bb44b8e5f dts: arm: st: set flash size for stm32l011X4 
This device lost the reg property since 88c9d1fbaf, causing the
nucleo_l011k4 board to not build anymore. Add it back, 512 bytes should
be the right number for this chip.

Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
 2023-11-09 09:09:22 +01:00
Erwan Gouriou 9e74efd159 dts: stm32wba: Add rtc node 
Add RTC node for stm32wba series.

Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
 2023-11-08 15:11:27 +00:00
Nazar Palamar 1fd080b8cf drivers: sdhc: added Infineon CAT1 SDHC/SDIO driver 
Added initial version of Infineon CAT1 SDHC/SDIO driver

Added initial version of binding file for Infineon CAT1 SDHC/SDIO
driver

Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
 2023-11-08 15:07:37 +00:00
Aaron Ye 0e827e3598 dts: arm: ambiq: Add clock control instances to Apollo4 Blue Plus SoC. 
This commit instantiates the clock control for Apollo4 Blue Plus.

Signed-off-by: Aaron Ye <aye@ambiq.com>
 2023-11-07 09:42:25 +01:00
Gerson Fernando Budke 5067e543fa dts: st: Add all missing l010 SoCs 
Add minimal devicetree entries to enable the whole stm32l010
SoC family.

Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
 2023-11-06 10:14:10 +01:00
Gerson Fernando Budke 88c9d1fbaf dts: st: Move eeprom from stm32l010 to stm32l010Xb 
The variants of this family have different sizes of eeprom. This moves
eeprom definition from common family definition to device specific.

Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
 2023-11-06 10:14:10 +01:00
Caspar Friedrich 8242ef0a37 soc: arm: st_stm32: stm32l0: Add support for STM32L081 
Add support for the STM32L081xx soc series.

Signed-off-by: Caspar Friedrich <c.s.w.friedrich@gmail.com>
 2023-11-06 10:11:40 +01:00
Daniel DeGrasse 8d5322b8ff drivers: ipm: remove nxp,imx-mu-rev2 compatible 
Remove nxp,imx-mu-rev2 compatible. This IP block is the same as the
nxp,imx-mu device, and should be handled by the same compatible

Instead, use CONFIG_HAS_MCUX to determine which HAL APIs should be used
to interact with the messaging unit IP.

Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
 2023-11-06 10:09:59 +01:00
cyliang tw 8ba8c188a0 drivers: ethernet: support for Nuvoton numaker series 
Add Nuvoton numaker series EMAC controller feature.

Signed-off-by: cyliang tw <cyliang@nuvoton.com>
 2023-11-03 12:11:33 +00:00
TOKITA Hiroshi 69a3930a19 drivers: serial: Add UART driver for Renesas RA series 
Adding initial support for Renesas RA UART.

To avoid complicating initial code for supporting the SoC,
I have implemented only the bare minimum for now.

Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
 2023-11-01 10:56:46 +00:00
TOKITA Hiroshi 3292c36115 drivers: gpio: Add GPIO driver for Renesas RA series 
Add initial support for Renesas RA GPIO.

To avoid complicating the initial code for supporting the SoC,
I have implemented only the bare minimum for now.

Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
 2023-11-01 10:56:46 +00:00