LPTIM is not available in STOP3 mode, so RTC needs to be used instead.
This code usese similar approach as STM32WBAx for suspend to ram.
The STOP3 is disabled by default in device tree.
Signed-off-by: Adam Berlinger <adam.berlinger@st.com>
After changing the VEVIF and BELLBOARD names,
the dts for the individual boards must be aligned.
Signed-off-by: Jakub Zymelka <jakub.zymelka@nordicsemi.no>
Nordic devices are commonly used with the nRF Connect SDK.
There the SoftDevice Controller is set as the default
Bluetooth Controller. To avoid confusion when reading DTS
and Kconfig files, clarify this by adding a note.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Add the IWDG and WWDG watchdog peripherals
the ADC1 & 2 peripherals with sensor for die temperature and voltage
the RNG entropy generator
Signed-off-by: Francois Ramu <francois.ramu@st.com>
LPC GPIO binding was wrong in that the reg address
on the simple soc bus was given as an index of the gpio ports
within a gpio controller. Fix this by putting the GPIO node
on the simple bus as a single node with the correct base address,
and make the ports children of this node.
Change the driver to get the port number from the reg address
instead of a custom property, and get base address from DT instead
of the SDK macro definition.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
define usbphy in DT and controller DT node ref to usbphy node.
define the usbphy yaml and update ehci and ip3511 yaml for usbphy.
Signed-off-by: Mark Wang <yichang.wang@nxp.com>
I also added an overlay file for the nucleo_h563zi board to the
samples/boards/stm32/backup_sram example.
Signed-off-by: Thorsten Spätling <thorsten.spaetling@vierling.de>
Convert the slz_hci.c HCI driver to use the new HCI driver API. This also
fixes the HCI bus type to correctly indicate VIRTUAL instead of UART.
Signed-off-by: Johan Hedberg <johan.hedberg@gmail.com>
Convert the hci_nxp.c HCI driver to use the new HCI driver API. Also move
the driver binding under dts/bindings/bluetooth, like all other HCI driver
bindings.
Signed-off-by: Johan Hedberg <johan.hedberg@gmail.com>
Convert the hci_stm32wba.c driver to the new HCI API. Unlike in most cases,
the devicetree node is already enabled on the SoC level (rather than board
level). This is in order to mirror how the Kconfig option was originally
enabled, i.e. on the SoC level.
Signed-off-by: Johan Hedberg <johan.hedberg@gmail.com>
Update the native controller to the new HCI driver API. The devicetree
node is placed under existing `radio` nodes, which seemed like the most
intuitive option.
Signed-off-by: Johan Hedberg <johan.hedberg@gmail.com>
Added a single instance lptmr node on the
mcxn947 soc dts. Updated counter lptmr to
have max value property.
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
This driver can be used for both mcux and
s32k series SoCs which have flexio IP.
PWM channel is automatically allocated by
flexio driver based on the available timers.
Signed-off-by: Sumit Batra <sumit.batra@nxp.com>
Fix simple bus reg / ranges warning from GPIO
nodes by giving the parent nodes addresses
and describing a ranges other than empty.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
On STM32G0, the backup memory is defined as part of the TAMP peripheral.
Use the same workaround as on STM32WL to add the node as part of the
RTC.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Adds channel 15 to the pool of grtc channels available
for allocation (i.e. with 'z_nrf_grtc_timer_chan_alloc')
on nRF54H20.
The change is motivated by lack of available channels
for the nrf_802154_timestamper when building for nRF54H20.
Signed-off-by: Piotr Koziar <piotr.koziar@nordicsemi.no>
This commit should address the #73803 issue
where the DMA node does not provide support
for the #dma-cells binding. Peripherals should
specify one or more DMA channels via the dmas
and optionally dma-names DT properties.
Signed-off-by: Ioannis Karachalios <ioannis.karachalios.px@renesas.com>
Support NXP ENET_1G on mimxrt1170_evk/mimxrt1176/cm7 platform.
Added test configuration sample.net.zperf.nxp_enet1g and
documented the usage of the ethernet driver with ENET_1G
peripheral.
Fixes: #66348
Signed-off-by: Stanislav Poboril <stanislav.poboril@nxp.com>
Add devicetree nodes for the two FlexCAN instances present on the
MCXN94x. Only CAN classic is enabled for now due to issues with FlexCAN FD
in relation to the implementation on this SoC.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add the new stm32h7rs serie with stm32H7R3, stm32H7R7,
stm32H7S3, stm32H7S7 devices from STMicroelectronics
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add support for configuration of the ARM PLL on the iMXRT1170/1160
series SOCs. This PLL is used to generate the M7 core frequency, and is
an integer pll. Provide default configurations for the RT1160 and RT1170
targeting 600MHz and 1GHz respectively.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add devicetree node of stm32 PWR peripheral that controlls wake-up pins.
The new node includes child nodes for wake-up pins configuration.
We only add these nodes for STM32 SoC series that support Poweroff.
Signed-off-by: Abderrahmane Jarmouni <abderrahmane.jarmouni-ext@st.com>
- The MK22FN512VLH12 chip, installed on frdm_k22f,
has 512 KB of Program Flash and 128KB SRAM
according to the K22P121M120SF7RM.pdf manual (page 55).
- Fix the flash size to 512KB (was 1MB).
- Add nxp_k22fn512.dtsi with correct flash size value.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
Add a digi_dietemp node for the STM32 Digital Temperature Sensor into
stm32h723.dtsi (used as a base for H723, H725, H730 and H735) and
stm32h7a3.dtsi (used as a base for H7A3, H7B0 and H7B3).
The sensor is not available on other H7 SoCs.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
