add uhc related items to dts.
add clock initialization
add BM4 if CONFIG_USB_UHC_NXP_KHCI is enabled
add pin mux
update board related CMakeLists.txt
update sdk-ng CMake to include NXP controller drivers
update west.yml to contain the hal_nxp pr
Signed-off-by: Mark Wang <yichang.wang@nxp.com>
espi: add espi peripheral channel HOST_CMD driver for rts5912
Unlike other chips using IO port 0x800-0x8ff, we utilize shared memory to
transfer host command parameters. The AP firmware must have corresponding
settings for this configuration.
Signed-off-by: jhan bo chao <jhan_bo_chao@realtek.com>
Due to erratum ERR011573, speculative accesses might be performed
to normal memory unmapped in the MPU. This can be avoided by using
MPU region 0 to cover all unmapped memory and make this region
execute-never and inaccessible.
Fixes#89852
Co-authored-by: Peter van der Perk <peter.vanderperk@nxp.com>
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
1. Add it51526bw SoC variant to it51xxx SoC series.
2. Create the .dtsi file with adjusted flash size for 512Kb (default = 1M).
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
The ROM bootloader has the option to boot from external QSPI flash on
the FlexSPI instead of internal flash. Adds
CONFIG_NXP_FLEXSPI_BOOT_HEADER to include the FlexSPI boot ROM header
in the image.
Signed-off-by: Derek Snell <derek.snell@nxp.com>
Add Set_WP function to set SPI flash WP line to low
Add Get_WP function to obtain status of the SPI flash WP line
Signed-off-by: Benson Huang <benson7633769@gmail.com>
Add code for sama7g5 Generic Clock, Main Clock, Main System Bus Clock,
Peripheral Clock, Programmable Clock and PLL Clock.
Signed-off-by: Tony Han <tony.han@microchip.com>
To simplify usage add dependecy to MAX32_ON_ENTER_CPU_IDLE_HOOK
If CONFIG_PM not defined set to to y as current,
If CONFIG_PM defined not set it
If user set CONFIG_PM not need to disable
MAX32_ON_ENTER_CPU_IDLE_HOOK anymore
Signed-off-by: Sadik Ozer <sadik.ozer@analog.com>
- AM6232 is a dual core variant of AM6234 with everything being same.
- Used in the first batch of PocketBeagle 2
Signed-off-by: Ayush Singh <ayush@beagleboard.org>
Added custom mcuboot cmake for sign/encrypt by using cysecuretools
Signed-off-by: Sreeram Tatapudi <sreeram.praveen@infineon.com>
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
Enable support of SECURE LCS stage. In this stage, the protection
state is set to “secure”. A secured device will boot only when the
authentication of its flash boot and application code succeeds
Signed-off-by: Sreeram Tatapudi <sreeram.praveen@infineon.com>
Instead of using app_header.c generate the app header using python
script and merge with final binary post build
Signed-off-by: Sreeram Tatapudi <sreeram.praveen@infineon.com>
Siwx91x support a specific mode slightly better than the old legacy PS
mode.
This mode has to be set on the NWP boot, so it is not easy to configure
it during the runtime. Hence, this patch only provide a compile time
option to enable it.
Co-authored-by: Arunmani Alagarsamy <arunmani.a@silabs.com>
Signed-off-by: Arunmani Alagarsamy <arunmani.a@silabs.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
sys_heap alloc and free are not thread safe so lock is needed to
prevent data corruption.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Sets the SYS_CLOCK_HW_CYCLES_PER_SEC Kconfig from devicetree
entries. Also fixes invalid configuration on nrf54h20 whereby it
attempts to take the clock frequency from a peripheral that does
not exist
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Port SYS_INIT to use soc_early_init_hook as SYS_INITs are legacy.
Due to moving dmm_init() from PRE_KERNEL_1 SYS_INIT to
soc_early_init_hook(), the DMM test is also updated to ensure that
its setup function runs before dmm_init().
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Signed-off-by: Jonathan Nilsen <jonathan.nilsen@nordicsemi.no>
Enabling CCDEV_SEL_EN may interfere with the expected behavior of
VCC1_RST#.
To prevent potential issues, this commit sets CCDEV_SEL_EN
to be disabled by default, ensuring reliable VCC1_RST# behavior.
Signed-off-by: Alvis Sun <yfsun@nuvoton.com>
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
This commit is retrieving the config FLASH_BASE_ADDRESS
from the XSPI node of the stm32 device dtsi <reg> property of the
"st,stm32-xspi" node. For example the CONFIG_FLASH_BASE_ADDRESS
is 0x90000000 and application is linked for that address.
Size is given by the size property of the "st,stm32-xspi-nor" node.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Nuvoton M55M1 series supports M-profile Vector Extension (MVE) (also
known as Arm Helium technology). This enables compute applications
such as DSP and machine learning.
Signed-off-by: Chun-Chieh Li <ccli8@nuvoton.com>
Added a pinctrl driver support for MSPM0 Family.
Signed-off-by: Saravanan Sekar <saravanan@linumiz.com>
Signed-off-by: Jackson Farley <j-farley@ti.com>
Add a support for Texas Instruments MSPM0 fmaily and
MSPM0-G series SoC.
Signed-off-by: Saravanan Sekar <saravanan@linumiz.com>
Signed-off-by: Jackson Farley <j-farley@ti.com>
Cache was not enabled when s2ram did not completed which
lead to system malfunction. Always power up cache when
returning from s2ram function.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Make the compilation of vpr_launcher dependent on sysbuild Kconfig
that can be set by SoC.
Signed-off-by: Marcin Szymczyk <marcin.szymczyk@nordicsemi.no>
Refactor siwx91x_get_nwp_config function to reduce its
Cognitive Complexity from 34 to below the allowed limit of 25
as per SonarQube guidelines. Extracted configuration logic into
smaller helper functions.
Signed-off-by: Arunmani Alagarsamy <arunmani.a@silabs.com>
- Implement event handling for AP and STA modes
- Enable configurations for security (PSK), aggregation,
and hidden PSK credentials
Signed-off-by: Arunmani Alagarsamy <arunmani.a@silabs.com>
- Adds support for configuring client maximum inactivity timeout.
- Adds support for bandwidth, It supports 20MHZ only.
- Adds support for setting the maximum number of clients and
hidden SSID mode by rebooting the NWP device.
Signed-off-by: Arunmani Alagarsamy <arunmani.a@silabs.com>
Replaced SL_SI91X_CLIENT_MODE and SL_SI91X_ACCESS_POINT_MODE with
WIFI_STA_MODE and WIFI_SOFTAP_MODE, respectively, for AP configuration
command intergration.
Signed-off-by: Arunmani Alagarsamy <arunmani.a@silabs.com>
