Move workaround methods for npcx series to soc init functions. If
there's no workaround for this series, drop its soc.c file directly.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
This patch adds definitions for the nRF9131,
which is software-compatible with nRF9161.
Signed-off-by: Maximilian Deubel <maximilian.deubel@nordicsemi.no>
In case of stm32h5 both LL_DBGMCU_EnableTraceClock() and
LL_DBGMCU_SetTracePinAssignment() need to be called in order to properly
configure SWO output.
Select HAS_SWO, so that logging over SWO can be enabled.
Tested with ST's fork of openocd [1].
[1] https://github.com/STMicroelectronics/OpenOCD
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Update iMX RT boot header to support CONFIG_XIP=n, when the image is not
linked into the flash space. Also, update the boot header to correctly
calculate the flash used size within the boot data header. This field is
used by the iMX boot ROM to determine how much data to copy when running
from RAM, so using the correct size fixes an issue where the ROM would
copy more data than needed.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
The CMSIS module glue code was part of arch/ directory. Move it to
modules/cmsis, and provide a single entry point for it: cmsis_core.h.
This entry header will include the right CMSIS header (M or A/R).
To make this change possible, CMSIS module Kconfig/CMake are declared as
external, allowing us to add a new Zephyr include directory.
All files including CMSIS have been updated.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This CL introduces new Flash Interface Unit (FIU) hardware in npcx4
series. The different operations of npcx9 and npcx4 FIU include:
1. 4-byte mode support for DRA mode move to SPI_DEV reg
2. To access the second flash in DRA mode, we need to configure
SPI_DEV_SEL field in BURST_CFG additionally.
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
This CL introduces new clock architectures in npcx4 series and wraps
clock configurations of different series by device tree files.
For example, the PWDWN_CTLx reg initialization relies on `pwdwn-ctl-val`
prop of pcc DT node now.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
This CL adds the soc drivers for npcx4 series. Besides adding npcx4m3f
and npcx4m8f support, we also modified the register offset of
LV_GPIO_CTL and PUPD_EN for npcx4 series.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
The XEC clock control driver sample code uses enum indexes to offset to
the desired GPIO CTRL register of the package. These enums are only
used in this example code and are being removed in favor of calculated
indexing into the specific GPIO register memory map.
Signed-off-by: Jeff Daly <jeffd@silicom-usa.com>
Move arm_mpu_mem_cfg header to common include directory.
The benefits are two-fold:
- Allow for out of tree SoC definitions to use them to
define mpu_regions.
- Remove odd relative include path
Signed-off-by: Moritz Fischer <moritzf@google.com>
Reduce the main clock frequency from 150MHz to 144MHz which allows meeting
the full range of CAN bitrates.
Fixes: #60811
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Since bb590b5b6e, which enforces a more consistent ordering of
initialisation for devices, the ECIA initialisation was happening after
GPIO initialisation. This caused interrupts to stop working on GPIO
input.
This patch fixes that by increasing the default GPIO initialisation
priority, so that it happens after ECIA.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
Since bb590b5b6e, which enforces a more consistent ordering of
initialisation for devices, the SOC initialisation was happening after
GPIO initialisation. This caused interrupts to stop working on GPIO
input.
This patch fixes that by increasing the default GPIO initialisation
priority, so that it happens after SOC.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
openamp shared memory regions can be anywhere in DDR memory
withing 2G range. Current SRAM_PRIV region is 64M which
prevents access of shared memory (vrings) by RPU (cortex-r5)
if it is out of 64M range. This patch allows vrings to be in DDR within
2G address space.
Developed-by: Dan Millea
Commited by: Tanmay Shah
Signed-off-by: Dan Milea <dan.milea@windriver.com>
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
Configure ENET_REF_CLK direction as input when
CONFIG_ETH_MCUX_RMII_EXT_CLK is set to allow Ethernet external clock
usage.
Signed-off-by: Benjamin Lemouzy <blemouzy@centralp.fr>
SiLabs' sleeptimer driver supports several hardware peripherals, of
which the counter driver so far only supports the RTCC-based variant.
This patch adds support for the SYSRTC-based sleeptimer implementation,
which is required for Gecko SoCs that do not have an RTCC module.
Signed-off-by: Markus Fuchs <markus.fuchs@ch.sauter-bc.com>
nRF53/91 require usage of nrf_regulators_system_off, so the API is not
common with nRF51/52. This was an oversight during the conversion.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Adds support for the NXP VMU RT1170 board. This Vehicle
Management Unit based on the i.MX RT1176 brings a fantastic
combination of sensors and IO all on one board for development
of various systems. It is also the featured board for
CogniPilot's Cerebri - VMU autopilot software based on Zephyr.
Co-authored-by: Peter van der Perk <peter.vanderperk@nxp.com>
Signed-off-by: Benjamin Perseghetti <bperseghetti@rudislabs.com>
Remove CONFIG_OCRAM_NOCACHE setting, as this is now possible to achieve
using devicetree linker regions, and there is no point in having a
specific Kconfig for one memory region on the RT series like this.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Enable SOC fixed MPU regions by default for the RT10xx/RT11xx SOC lines.
Additionally, add code to handle defining the SDRAM0 region as
device type (non cacheable, non shareable). This behavior can
be disabled with CONFIG_NXP_IMX_EXTERNAL_SDRAM=y. Set this Kconfig
for all boards in tree using SDRAM.
This will resolve an issue present on the RT11xx series where
the core may execute speculative prefetches to the SDRAM region when
no SDRAM is present on the board, resulting in the system faulting.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Don't default CONFIG_DEVICE_CONFIGURATION_DATA to enabled for iMX RT
SOCs, as this configuration block is only used when the board needs
peripherals like the external memory controller setup from reset by the
bootrom.
Enable this feature on all in tree boards that will require it,
and document the change to the default value in release notes.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Nordic SoCs do all power management automagically when going to idle (ie
k_cpu_idle()). The only extra state, system off, is now handled via
sys_shutdown(), so there's no need to support the PM subsystem.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
So far the init priories were:
enetc_psi0=60 < enetc_vsin=61 < emdio=70 < ethernet-phy=80
because the Ethernet PSI driver was doing global initialization for the
whole NETC complex, including enabling MDIO function (due to the way
the HAL works).
Change to use the default init priorities:
mdio=60 < phy=70 < eth=enetc_psi0=80 < enetc_vsin=81
by executing at an early stage the NETC global initialization. This also
allows to match the DT hierarchy representation of NETC with the
effective priorities assigned.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Disable SysTick when STIMER is in use and configure
SYS_CLOCK_HW_CYCLES_PER_SEC setting for it.
Signed-off-by: Maciej Sobkowski <msobkowski@antmicro.com>
This commit addst pinctrl support for Apollo4 SoCs.
Co-authored-by: Mateusz Sierszulski <msierszulski@antmicro.com>
Signed-off-by: Maciej Sobkowski <msobkowski@antmicro.com>
The sam0 CMCC configure Cortex-M cache controller. However, it is not
clear how the cache management should be performed. It is nor clear if
instructions like SCB_EnableICache can be used. In this case, if cache
management should be made only by CMCC it may require a dedicated
implementation.
Besides above, the CPU_CORTEX_M4 do not define cache by default which
can signal a bad configuration in tree since the SOC_SERIES_SAME54 do
not define which caches should be available.
This force cache controller disable to avoid issues.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
The current platform initialization do not take in consideration cache
management for historic reasons. This fixes any miss configuration and
allow users to enable/disable caches at board definition. The default
value is cache disabled and the below examples are for SAMV71 which
have both I/D Cache available:
I Cache only:
CONFIG_CACHE_MANAGEMENT=y
CONFIG_DCACHE=n
D Cache only:
CONFIG_CACHE_MANAGEMENT=y
CONFIG_ICACHE=n
I/D Cache disabled:
CONFIG_ICACHE=n
CONFIG_DCACHE=n
I/D Cache Enabled:
CONFIG_CACHE_MANAGEMENT=y
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
This replace pre kernel initialization by the platform specific
initialization call. The platform specific init will configure
at very beginning the clocks, flash wait states and cache.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
This update Kconfig.series files to normalize copyright date order from
lower to higher and reorder select entries.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Some configurations have the system timer driver hardwired in.
Let's make them compatible with CONFIG_SYS_CLOCK_EXISTS=n.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This device has a single instance of EMAC (a 100Mbps version of GMAC).
TCP/UDP checksum calculation is offloaded.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Reuse existing NXP LPSPI binding for this SoC since the hardware block
for this device is the same as the one supported for other NXP devices.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Do not select CONFIG_CACHE_MANAGEMENT in the Microchip SAM CAN driver
Kconfig but rather leave it up to the SoC/platform Kconfig to enable it as
needed and enable CACHE_MANAGEMENT by default for the Atmel SAM E70/V71 SoC
series.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Currently on zephyr, RAIL is used only for bluetooth. RAIL library is
needed to use efr32 radio regardless of the protocol used. We add
SOC_GECKO_USE_RAIL kconfig option to indicate if we use radio.
FPU is needed when using RAIL, we configure it if SOC_GECKO_USE_RAIL
is set.
Signed-off-by: Antoine Bout <antoine.bout@silabs.com>
