The place where TF-M places its non-secure api header files has changed
Therefore changing it for for all applications that use it.
Signed-off-by: Markus Swarowsky <markus.swarowsky@nordicsemi.no>
Update TF-M to version 2.0.0 including
MbedTLS to v3.5.0
TF-M-Tests to v2.0.0
PSA-Arch_Tests to v23.06_API1.5_ADAC_EAC
Signed-off-by: Markus Swarowsky <markus.swarowsky@nordicsemi.no>
This change renames the RX message buffer from g_hciRxMsg to rxmsg,
as it does not follow the Zephyr coding style.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
This change relocates the tx/rx message buffer from the .bss section
to the .noinit section. This adjustment is aimed at reducing boot time by
lowering the size of the .bss section, without impacting the operational
functionality of the buffer.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Use transmit idle event to synchronize with data transmitted
through DLCI pipes to test TRANSMIT_IDLE implementation.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
Implement transmit idle event both for transmitting data to the
bus, and for the individual DLCI channels.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
The LPS22HB is a pressure and temperature sensor, but
this sample document is wrongly mentioning "humidity".
Fix#66117
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Instead of asserting, handle CIS creation latency for the peripheral by
finding next valid ISO event at which to start the CIG ticker.
Refactored calculations of the cig_offset to separate functions, to be
used also when calculating a new start offset.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Add DMIC API test, intended to verify DMIC drivers are functioning
correctly within the DMIC API.
The test verifies the following:
- Mono channel audio
- Stereo channel audio
- Using maximum number of channels supported by DMIC IP
- Pausing/restarting channels
- Checks to make sure invalid channel maps are rejected by the DMIC.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Enable L/R channel pair for DMIC0 on the RT595 EVK. The RT595 EVK has a
pair of MEMS microphones wired to PDM channel 0 and 1, so these channels
are configured with appropriate gain and filter settings for the MEMS
microphones.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Co-authored-by: Yves Vandervennet <yves.vandervennet@nxp.com>
Add definition of the DMIC to the RT5xx devicetree, including all
PDM channels.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Co-authored-by: Yves Vandervennet <yves.vandervennet@nxp.com>
Clock DMIC0 from the audio PLL when DMIC driver class is enabled.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Co-authored-by: Yves Vandervennet <yves.vandervennet@nxp.com>
Add driver for NXP DMIC peripheral. This peripheral is present on the
iMX RT5xx and iMX RT6xx parts, as well as some LPC SOCs. The following
features are supported:
- up to 2 simultaneous channels of L/R PCM data (4 channels are not
supported due to limitations of the DMA engine)
- individual configuration of gain and filter parameters for each DMIC
channel input
The driver has been tested with up to 4 PCM data streams (2 L/R channels),
as well as the MEMS microphones present on the RT595 EVK.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Co-authored-by: Yves Vandervennet <yves.vandervennet@nxp.com>
Add definition for DMIC clock source to LPC SYSCON clock control driver.
This constant allows drivers to get the DMIC bit clock frequency.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add DMIC_STATE_ERROR enum. This can be used by DMIC drivers for
instances in which a significant error has occurred (typically when the
DMIC cannot allocate additional buffers for PCM data and starves)
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Fixup parse_channel_map implementation. The previous implementation of
this function did not use the "channel_map" values passed in by the
user, and would not return correct values for the PDM hardware
controller or L/R value. This function is not being used in tree, so
correcting the implementation to align with documentation should have
minimal affect.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
This update stm32h747i_disco board display config to use ltdc frame
buffer config feature.
For lvgl, by default ltdc frame buffer number set to 0.
Signed-off-by: HaiLong Yang <hailong.yang@brainco.cn>
This commit adds a function that updates the hostname displayed by the
net backend. It is called by the network stack when the hostname is
updated.
Signed-off-by: Gerhard Jörges <joerges@metratec.com>
The POSIX standard doesn't specify if the argument to store
previous state/type in
`pthread_setcancelstate`/`pthread_setcancelstate` can be
`NULL`, but threading implementations in Linux & Apache NuttX
permit the arguments to be `NULL`.
This commit changes Zephyr's implementation to mimic that of
Linux & NuttX, so that user do not get caught off-guard by
NULL pointer dereferencing when porting code over from those
OSes.
Updated test accordingly.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Always pull from the channel queue from the system workqueue context.
This simplifies debugging.
This also allows us to remove `sent` from the metadata struct.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Separate most of the param checking in `bt_l2cap_chan_send()`, with the
logic in `bt_l2cap_dyn_chan_send()`.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Fix missing ISO Synchronized Receiver radio event time
reservation that did not calculate for all the subevents.
Introduce BT_CTLR_SYNC_ISO_RESERVE_MAX Kconfig option to
allow using a minimal time reservation if needed to allow
other role to pre-empt ISO Synchronized Receiver in
pre-transmission and control subevents.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Allow the driver to compile without `CONFIG_NET_NATIVE_IPV4`. This can
happen if the driver is only desired for SSID scanning.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Rather than duplicating the same schema, define it only once and reuse
for both common section and tests section.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Extend api test suite to cover the new devicetree macros. This
includes extending the devicetree overlay with two new bindings:
- GPIO device which is also an interrupt controller
- interrupt holder using interrupts-extended to point to both
existing interrupt controller test_intc, and the newly added
GPIO device
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
Add the following macros to devicetree.h to get an interrupt
specifier's interrupt controller:
DT_IRQ_INTC_BY_IDX(node_id, idx)
DT_IRQ_INTC_BY_NAME(node_id, name)
DT_IRQ_INTC(node_id)
and their INST variants
DT_INST_INTC_BY_IDX(inst, idx)
DT_INST_INTC_BY_NAME(inst, name)
DT_INST_IRQ(inst)
which use the newly generated _CONTROLLER output from the
previous commit.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
Extend the gen_defines.py write_interrupts(node) function to
generate macros to get the interrupt controller for an
interrupt specifier by idx and by name.
The information is already generated by edtlib.py and stored in
node.interrupts[].controller. This addition uses the node pointed
to by the controller member to generate the following example output
define DT_N_S_device1_IRQ_IDX_0_CONTROLLER \
DT_N_S_gpio_800
define DT_N_S_device1_IRQ_NAME_test4_CONTROLLER \
N_S_device1_IRQ_IDX_0_CONTROLLER
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
Updated the files present in gecko/se_manager folder in Silabs HAL
as per latest version of gecko_sdk.
Signed-off-by: Sateesh Kotapati <sateesh.kotapati@silabs.com>
As there isn't any ZTEST under the `posix_apis` testsuite, its
the testsuite is skipped and its setup function never ran,
let's convert the fdtable initialization setup function into a
test of `posix_apis`.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Currently all components live under the `posix_apis` testsuite,
this commit split them into a testsuite of their own.
This commit also prefixed a few local functions/variables with
the `static` keyword.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Make sure that the POSIX clock base is reset after every
testsuite so that the initial time is the same for every test.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Add flash partitions required to use the board with MCUboot.
Also fix the chosen zephyr,code-partition devicetree node and point it
to slot0_partition.
Signed-off-by: Martin Jäger <martin@libre.solar>
Add flash partitions required to use the board with MCUboot.
Also fix the chosen zephyr,code-partition devicetree node and point it
to slot0_partition.
Signed-off-by: Martin Jäger <martin@libre.solar>
Master Inter-Data Idleness and Master SS Idleness
can configure with STM32 low level spi driver apis.
Signed-off-by: Mustafa Abdullah Kus <mustafa.kus@sparsetechnology.com>
add Master Inter-Data Idleness and
Master SS Idleness field. That fields
are integers.
Signed-off-by: Mustafa Abdullah Kus <mustafa.kus@sparsetechnology.com>
wsr.UPPERCASE can lead to compiler errors when UPPERCASE matches
a macro defined in the special register header file.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
rsr.UPPERCASE can lead to compiler errors when UPPERCASE matches
a macro defined in the special register header file.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Use 'switch' to emphasise that we're handling different values of
'state' in pm_state_set().
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
