..
96b_aerocore2
boards: stm32: pinmux: Restore Kconfig control on pinmux (adc)
2020-05-20 12:09:19 +02:00
96b_argonkey
board: arm: Enable MPU for all STM32 boards supporting it
2020-06-19 08:55:44 -05:00
96b_avenger96
board: arm: Enable MPU for all STM32 boards supporting it
2020-06-19 08:55:44 -05:00
96b_carbon
boards: stm32: pinmux: Restore Kconfig control on pinmux (i2c)
2020-05-20 12:09:19 +02:00
96b_carbon_nrf51
boards: dts: nrf: Remove SoC compatible in top-level compatible
2020-04-29 08:20:15 -05:00
96b_meerkat96
boards: arm: Conditionalize serial pinmuxes on nxp boards
2020-05-22 14:56:00 +02:00
96b_neonkey
board: arm: Enable MPU for all STM32 boards supporting it
2020-06-19 08:55:44 -05:00
96b_nitrogen
boards: Remove Kconfig I2C_[0-9] usage
2020-05-06 10:55:38 -05:00
96b_stm32_sensor_mez
boards: stm32: pinmux: Restore Kconfig control on pinmux (i2s)
2020-05-20 12:09:19 +02:00
96b_wistrio
spi-device: set CS gpio flags for all devices that had none
2020-07-09 06:07:07 -05:00
actinius_icarus
boards: arm: nrf: Remove Kconfig PWM_[0-3] usage
2020-05-05 08:40:19 -05:00
adafruit_feather_m0_basic_proto
boards: arm: remove the explicit --offset flag
2020-07-02 08:23:03 -04:00
adafruit_feather_nrf52840
boards: fix misleading size for partition
2020-05-13 21:25:29 +02:00
adafruit_feather_stm32f405
boards: remove usage of deprecated GPIO flags from .dts
2020-06-16 19:13:05 +02:00
adafruit_itsybitsy_m4_express
boards: arm: add OpenOCD flash and debug support for the itsybitsy_m4
2020-07-13 10:24:13 -05:00
adafruit_trinket_m0
boards: arm: configure and document the bootloader on the Trinket M0
2020-07-22 13:24:37 +02:00
arduino_due
drivers: i2c: i2c_sam_twi: rework device tree support
2020-04-21 15:46:30 -05:00
arduino_nano_33_iot
boards: arm: add the Arduino Nano 33 IOT
2020-07-24 12:01:50 +02:00
arduino_zero
boards: arm: enable PWM on the Arduino Zero
2020-07-01 08:10:59 -05:00
atsamd20_xpro
spi-device: set CS gpio flags for all devices that had none
2020-07-09 06:07:07 -05:00
atsamd21_xpro
boards: atsamd21_xpro: Support driving on-board LED with PWM
2020-07-02 08:39:33 -04:00
atsame54_xpro
boards: atsame54_xpro: Support driving on-board LED with PWM
2020-07-04 07:09:28 -04:00
atsamr21_xpro
boards: arm: samr21_xpro: Add atmel xplained-pro headers
2020-07-13 11:54:29 +02:00
b_l4s5i_iot01a
boards: arm: b_l4s5i_iot01a overlapping flash partitions
2020-07-01 08:07:36 -04:00
b_l072z_lrwan1
boards: arm: b_l072z_lrwan1: Add flash support
2020-07-06 08:18:35 -05:00
bbc_microbit
boards: dts: nrf: Remove SoC compatible in top-level compatible
2020-04-29 08:20:15 -05:00
bcm958401m2
driver: uart: ns16550: convert to DT_INST_*
2020-03-14 02:22:05 +02:00
bcm958402m2_a72
boards: arm: bcm958402m2_a72: remove CONFIG_PCIE
2020-07-14 19:35:31 -04:00
bcm958402m2_m7
boards: arm: Add bcm958402m2_m7 board
2020-05-08 10:46:23 +02:00
bl652_dvk
spi-device: set CS gpio flags for all devices that had none
2020-07-09 06:07:07 -05:00
bl654_dvk
spi-device: set CS gpio flags for all devices that had none
2020-07-09 06:07:07 -05:00
black_f407ve
boards: stm32: pinmux: Restore Kconfig control on pinmux (can)
2020-05-20 12:09:19 +02:00
black_f407zg_pro
boards: stm32: pinmux: Restore Kconfig control on pinmux (can)
2020-05-20 12:09:19 +02:00
blackpill_f411ce
boards: arm: stm32: Add WeAct Black Pill V2.0 definitions
2020-07-17 16:54:22 +02:00
cc26x2r1_launchxl
spi-device: set CS gpio flags for all devices that had none
2020-07-09 06:07:07 -05:00
cc1352r1_launchxl
spi-device: set CS gpio flags for all devices that had none
2020-07-09 06:07:07 -05:00
cc3220sf_launchxl
drivers: cc32xx: use DT_INST_FOREACH to reduce code duplication
2020-04-26 06:05:10 -05:00
cc3235sf_launchxl
drivers: cc32xx: use DT_INST_FOREACH to reduce code duplication
2020-04-26 06:05:10 -05:00
circuitdojo_feather_nrf9160
boards: arm: nrf: Adding board.c to nRF9160 Feather def
2020-07-10 17:56:00 +02:00
colibri_imx7d_m4
boards: arm: Conditionalize pwm pinmuxes on nxp boards
2020-05-22 14:56:00 +02:00
cy8ckit_062_wifi_bt_m0
kconfig: Replace defconfig singe-symbol 'if's with 'depends on'
2020-02-12 10:32:13 -06:00
cy8ckit_062_wifi_bt_m4
kconfig: Replace defconfig singe-symbol 'if's with 'depends on'
2020-02-12 10:32:13 -06:00
decawave_dwm1001_dev
boards: decawave_dwm1001_dev: make button active low
2020-07-08 16:10:25 -05:00
degu_evk
boards: dts: nrf: Remove SoC compatible in top-level compatible
2020-04-29 08:20:15 -05:00
disco_l475_iot1
drivers: wifi: eswifi: Add chip select flags
2020-07-06 08:24:18 -05:00
dragino_lsn50
boards: stm32: pinmux: Restore Kconfig control on pinmux (serial)
2020-05-20 12:09:19 +02:00
efm32gg_stk3701a
boards: arm: Fix deprecated "gccarmemb" toolchain references
2020-06-10 09:22:03 +02:00
efm32hg_slstk3400a
drivers: gpio_gecko: convert to DT_INST defines
2020-03-24 10:14:21 -05:00
efm32pg_stk3402a
boards: arm: Fix deprecated "gccarmemb" toolchain references
2020-06-10 09:22:03 +02:00
efm32wg_stk3800
boards: efm32/efr32: Enable MPU on all boards supporting it
2020-06-09 10:46:47 +02:00
efr32_radio
spi-device: set CS gpio flags for all devices that had none
2020-07-09 06:07:07 -05:00
efr32mg_sltb004a
spi-device: set CS gpio flags for all devices that had none
2020-07-09 06:07:07 -05:00
frdm_k22f
boards: arm: Remove OPENSDA_FW cmake variables from nxp boards
2020-07-09 07:58:50 -05:00
frdm_k64f
boards: arm: Remove OPENSDA_FW cmake variables from nxp boards
2020-07-09 07:58:50 -05:00
frdm_k82f
boards: arm: Clean up zephyr-app-commands usage in frdm_k82f board doc
2020-07-09 07:58:50 -05:00
frdm_kl25z
boards: arm: Remove OPENSDA_FW cmake variables from nxp boards
2020-07-09 07:58:50 -05:00
frdm_kw41z
boards: arm: Remove OPENSDA_FW cmake variables from nxp boards
2020-07-09 07:58:50 -05:00
google_kukui
boards: stm32: pinmux: Restore Kconfig control on pinmux (i2c)
2020-05-20 12:09:19 +02:00
hexiwear_k64
boards: arm: Remove OPENSDA_FW cmake variables from nxp boards
2020-07-09 07:58:50 -05:00
hexiwear_kw40z
boards: arm: Remove OPENSDA_FW cmake variables from nxp boards
2020-07-09 07:58:50 -05:00
holyiot_yj16019
boards: fix misleading size for partition
2020-05-13 21:25:29 +02:00
ip_k66f
defconfig: Enable RMII_EXT_CLK on ip_k66f board
2020-06-10 13:02:22 -05:00
lpcxpresso55s16
boards: arm: Clean up lpcxpresso55s16 board.cmake
2020-07-09 07:58:50 -05:00
lpcxpresso55s69
dts: arm: nxp: nxp_lpc55s6x: Use proper code partition
2020-07-15 13:29:50 +02:00
lpcxpresso54114
boards: arm: Remove OPENSDA_FW cmake variables from nxp boards
2020-07-09 07:58:50 -05:00
mec15xxevb_assy6853
boards: mec15xxevb_assy6853: use DTS node labels for PWM pinmux
2020-07-15 06:14:56 -04:00
mec1501modular_assy6885
boards: mec1501modular_assy6885: Add support for UART0
2020-06-28 23:45:27 -04:00
mec2016evb_assy6797
devicetree: remove DT_HAS_NODE_STATUS_OKAY
2020-05-13 18:24:42 +02:00
mikroe_mini_m4_for_stm32
boards: stm32: pinmux: Restore Kconfig control on pinmux (pwm)
2020-05-20 12:09:19 +02:00
mimxrt1010_evk
boards: arm: Remove OPENSDA_FW cmake variables from nxp boards
2020-07-09 07:58:50 -05:00
mimxrt1015_evk
boards: arm: Remove OPENSDA_FW cmake variables from nxp boards
2020-07-09 07:58:50 -05:00
mimxrt1020_evk
boards: arm: Remove OPENSDA_FW cmake variables from nxp boards
2020-07-09 07:58:50 -05:00
mimxrt1050_evk
boards: arm: Remove OPENSDA_FW cmake variables from nxp boards
2020-07-09 07:58:50 -05:00
mimxrt1060_evk
boards: arm: Remove OPENSDA_FW cmake variables from nxp boards
2020-07-09 07:58:50 -05:00
mimxrt1064_evk
boards: arm: Remove OPENSDA_FW cmake variables from nxp boards
2020-07-09 07:58:50 -05:00
mm_swiftio
boards: mm_swiftio: swiftio_mm no support pw control
2020-07-01 08:06:50 -04:00
mps2_an385
boards: centralize QEMU icount management
2020-06-24 20:28:36 -04:00
mps2_an521
boards: centralize QEMU icount management
2020-06-24 20:28:36 -04:00
msp_exp432p401r_launchxl
kconfig: Rename CONFIG_FLOAT to CONFIG_FPU
2020-04-27 19:03:44 +02:00
nrf51_ble400
spi-device: set CS gpio flags for all devices that had none
2020-07-09 06:07:07 -05:00
nrf51_blenano
boards: dts: nrf: Remove SoC compatible in top-level compatible
2020-04-29 08:20:15 -05:00
nrf51_vbluno51
boards: dts: nrf: Remove SoC compatible in top-level compatible
2020-04-29 08:20:15 -05:00
nrf51dk_nrf51422
boards: nordic: add gpio as supported feature on major dev boards
2020-06-09 08:17:19 -04:00
nrf51dongle_nrf51422
boards: dts: nrf: Remove SoC compatible in top-level compatible
2020-04-29 08:20:15 -05:00
nrf52_adafruit_feather
drivers: serial: nrf: Remove flow control configuration from kconfig
2020-06-09 19:06:16 +02:00
nrf52_blenano2
boards: dts: nrf: Remove SoC compatible in top-level compatible
2020-04-29 08:20:15 -05:00
nrf52_sparkfun
boards: dts: nrf: Remove SoC compatible in top-level compatible
2020-04-29 08:20:15 -05:00
nrf52_vbluno52
boards: dts: nrf: Remove SoC compatible in top-level compatible
2020-04-29 08:20:15 -05:00
nrf52dk_nrf52810
boards: dts: nrf: Remove SoC compatible in top-level compatible
2020-04-29 08:20:15 -05:00
nrf52dk_nrf52832
spi-device: set CS gpio flags for all devices that had none
2020-07-09 06:07:07 -05:00
nrf5340dk_nrf5340
boards: nrf5340: update help text for BOARD_ENABLE_CPUNET symbol
2020-07-23 14:07:16 +02:00
nrf9160_innblue21
dts: remove incorrect use of device_type property
2020-07-23 06:37:41 -05:00
nrf9160_innblue22
dts: remove incorrect use of device_type property
2020-07-23 06:37:41 -05:00
nrf9160dk_nrf9160
boards: nrf9160dk_nrf9160: Add "spi" as supported feature
2020-06-25 19:33:41 +02:00
nrf9160dk_nrf52840
zephyr: replace zephyr integer types with C99 types
2020-06-08 08:23:57 -05:00
nrf52832_mdk
boards: arm: nrf: Remove Kconfig PWM_[0-3] usage
2020-05-05 08:40:19 -05:00
nrf52833dk_nrf52820
boards: arm: Add Nordic nrf52820 build defines for nrf52833 DK
2020-06-15 20:15:42 +02:00
nrf52833dk_nrf52833
spi-device: set CS gpio flags for all devices that had none
2020-07-09 06:07:07 -05:00
nrf52840_blip
boards: fix misleading size for partition
2020-05-13 21:25:29 +02:00
nrf52840_mdk
boards: fix misleading size for partition
2020-05-13 21:25:29 +02:00
nrf52840_papyr
boards: fix misleading size for partition
2020-05-13 21:25:29 +02:00
nrf52840dk_nrf52811
boards: arm: nrf: Remove Kconfig PWM_[0-3] usage
2020-05-05 08:40:19 -05:00
nrf52840dk_nrf52840
spi-device: set CS gpio flags for all devices that had none
2020-07-09 06:07:07 -05:00
nrf52840dongle_nrf52840
doc: nrf52840dongle_nrf52840: fix build instructions for external probes
2020-06-09 11:14:31 +02:00
nucleo_f030r8
boards: stm32: pinmux: Restore Kconfig control on pinmux (i2c)
2020-05-20 12:09:19 +02:00
nucleo_f070rb
boards: nucleo_f070rb/f303re: fix clock configuration
2020-07-05 07:56:21 -04:00
nucleo_f091rc
boards: arm: stm32f091 add rtc feature on the nucleo board
2020-07-24 16:16:21 +02:00
nucleo_f103rb
drivers/clock_control: Remove useless CLOCK_STM32_PLL_XTPRE config
2020-07-02 08:14:45 -05:00
nucleo_f207zg
drivers/ethernet: stm32: Enable Kconfig symbol ETH_STM32_HAL using dts
2020-07-24 12:03:33 +02:00
nucleo_f302r8
boards: stm32: pinmux: Restore Kconfig control on pinmux (adc)
2020-05-20 12:09:19 +02:00
nucleo_f303re
boards: nucleo_f070rb/f303re: fix clock configuration
2020-07-05 07:56:21 -04:00
nucleo_f334r8
boards: stm32: pinmux: Restore Kconfig control on pinmux (pwm)
2020-05-20 12:09:19 +02:00
nucleo_f401re
drivers: pwm: stm32: add support for polarity
2020-06-19 15:18:50 +02:00
nucleo_f411re
boards: stm32: pinmux: Restore Kconfig control on pinmux (i2s)
2020-05-20 12:09:19 +02:00
nucleo_f412zg
boards: stm32: pinmux: Restore Kconfig control on pinmux (pwm)
2020-05-20 12:09:19 +02:00
nucleo_f413zh
boards: stm32: pinmux: Restore Kconfig control on pinmux (pwm)
2020-05-20 12:09:19 +02:00
nucleo_f429zi
drivers/ethernet: stm32: Enable Kconfig symbol ETH_STM32_HAL using dts
2020-07-24 12:03:33 +02:00
nucleo_f446re
boards: stm32: pinmux: Restore Kconfig control on pinmux (i2c)
2020-05-20 12:09:19 +02:00
nucleo_f746zg
drivers/ethernet: stm32: Enable Kconfig symbol ETH_STM32_HAL using dts
2020-07-24 12:03:33 +02:00
nucleo_f756zg
drivers/ethernet: stm32: Enable Kconfig symbol ETH_STM32_HAL using dts
2020-07-24 12:03:33 +02:00
nucleo_f767zi
drivers/ethernet: stm32: Enable Kconfig symbol ETH_STM32_HAL using dts
2020-07-24 12:03:33 +02:00
nucleo_g071rb
boards: stm32: pinmux: Restore Kconfig control on pinmux (serial)
2020-05-20 12:09:19 +02:00
nucleo_g431rb
drivers: pwm: stm32: add support for polarity
2020-06-19 15:18:50 +02:00
nucleo_g474re
drivers: pwm: stm32: add support for polarity
2020-06-19 15:18:50 +02:00
nucleo_h743zi
drivers: pwm: stm32: add support for polarity
2020-06-19 15:18:50 +02:00
nucleo_h745zi_q
boards: nucleo_h747: Fix pinmux conditional configuration
2020-07-24 12:03:33 +02:00
nucleo_l4r5zi
boards: arm: stm32l4r5 unset the LPTIM clock source if enabled
2020-05-29 14:13:05 +02:00
nucleo_l053r8
board: arm: Enable MPU for all STM32 boards supporting it
2020-06-19 08:55:44 -05:00
nucleo_l073rz
board: arm: Enable MPU for all STM32 boards supporting it
2020-06-19 08:55:44 -05:00
nucleo_l152re
board: arm: Enable MPU for all STM32 boards supporting it
2020-06-19 08:55:44 -05:00
nucleo_l432kc
board: arm: Enable MPU for all STM32 boards supporting it
2020-06-19 08:55:44 -05:00
nucleo_l452re
board: arm: Enable MPU for all STM32 boards supporting it
2020-06-19 08:55:44 -05:00
nucleo_l476rg
boards: stm32: pinmux: Restore Kconfig control on pinmux (adc)
2020-05-20 12:09:19 +02:00
nucleo_l496zg
drivers: pwm: stm32: add support for polarity
2020-06-19 15:18:50 +02:00
nucleo_l552ze_q
boards: stm32: pinmux: Restore Kconfig control on pinmux (serial)
2020-05-20 12:09:19 +02:00
nucleo_wb55rg
boards: arm: Fix deprecated "gccarmemb" toolchain references
2020-06-10 09:22:03 +02:00
nuvoton_pfm_m487
board: arm: add support for nuvoton pfm m487
2020-07-01 21:09:25 +02:00
olimex_stm32_e407
boards: stm32: Enable ethernet devices through device tree
2020-07-24 12:03:33 +02:00
olimex_stm32_h103
boards: arm: olimex stm32-h103: Add board
2020-07-24 14:48:07 +02:00
olimex_stm32_h407
boards: stm32: pinmux: Restore Kconfig control on pinmux (serial)
2020-05-20 12:09:19 +02:00
olimex_stm32_p405
boards: stm32: pinmux: Restore Kconfig control on pinmux (can)
2020-05-20 12:09:19 +02:00
olimexino_stm32
drivers/clock_control: Remove useless CLOCK_STM32_PLL_XTPRE config
2020-07-02 08:14:45 -05:00
particle_argon
spi-device: set CS gpio flags for all devices that had none
2020-07-09 06:07:07 -05:00
particle_boron
spi-device: set CS gpio flags for all devices that had none
2020-07-09 06:07:07 -05:00
particle_xenon
spi-device: set CS gpio flags for all devices that had none
2020-07-09 06:07:07 -05:00
pico_pi_m4
boards: arm: Conditionalize i2c pinmuxes on nxp boards
2020-05-22 14:56:00 +02:00
qemu_cortex_a53
boards: qemu_cortex_a53: do not run on net/bt tests
2020-06-25 11:05:29 -04:00
qemu_cortex_m0
boards: arm: qemu_cortex_m0: Removed HFXO request from the timer
2020-07-20 16:22:21 +02:00
qemu_cortex_m3
boards: centralize QEMU icount management
2020-06-24 20:28:36 -04:00
qemu_cortex_r5
boards: centralize QEMU icount management
2020-06-24 20:28:36 -04:00
reel_board
spi-device: set CS gpio flags for all devices that had none
2020-07-09 06:07:07 -05:00
ruuvi_ruuvitag
spi-device: set CS gpio flags for all devices that had none
2020-07-09 06:07:07 -05:00
sam4e_xpro
boards: arm: sam4e_xpro: Add atmel xplained-pro headers
2020-07-13 11:54:29 +02:00
sam4s_xplained
boards: arm: sam4s_xplained: Add atmel xplained headers
2020-07-13 11:54:29 +02:00
sam_e70_xplained
devicetree: remove DT_HAS_NODE_STATUS_OKAY
2020-05-13 18:24:42 +02:00
sam_v71_xult
boards: arm: sam_v71_xult: Add arduino uno r3 headers
2020-07-13 11:54:29 +02:00
seeeduino_xiao
boards: arm: add an OpenOCD config for the seeduino_xiao
2020-07-01 08:15:32 -05:00
sensortile_box
spi-device: set CS gpio flags for all devices that had none
2020-07-09 06:07:07 -05:00
steval_fcu001v1
boards: stm32: pinmux: Restore Kconfig control on pinmux (pwm)
2020-05-20 12:09:19 +02:00
stm32_min_dev
drivers/clock_control: Remove useless CLOCK_STM32_PLL_XTPRE config
2020-07-02 08:14:45 -05:00
stm32f0_disco
boards: stm32: pinmux: Restore Kconfig control on pinmux (serial)
2020-05-20 12:09:19 +02:00
stm32f3_disco
boards: arm: stm32f3 disco board enables the iwdg
2020-06-24 21:00:23 +02:00
stm32f4_disco
boards: stm32: pinmux: Restore Kconfig control on pinmux (can)
2020-05-20 12:09:19 +02:00
stm32f030_demo
boards: stm32f030_demo: enable stm32flash in addition to OpenOCD
2020-07-02 07:18:33 -05:00
stm32f072_eval
boards: stm32: pinmux: Restore Kconfig control on pinmux (serial)
2020-05-20 12:09:19 +02:00
stm32f072b_disco
boards: stm32: pinmux: Restore Kconfig control on pinmux (can)
2020-05-20 12:09:19 +02:00
stm32f411e_disco
boards: stm32f411e_disco: add USB device support to stm32f411e_disco
2020-06-23 13:07:49 +02:00
stm32f412g_disco
boards: stm32: pinmux: Restore Kconfig control on pinmux (serial)
2020-05-20 12:09:19 +02:00
stm32f429i_disc1
spi-device: set CS gpio flags for all devices that had none
2020-07-09 06:07:07 -05:00
stm32f469i_disco
boards: stm32: pinmux: Restore Kconfig control on pinmux (i2c)
2020-05-20 12:09:19 +02:00
stm32f723e_disco
board: arm: Enable MPU for all STM32 boards supporting it
2020-06-19 08:55:44 -05:00
stm32f746g_disco
drivers/ethernet: stm32: Enable Kconfig symbol ETH_STM32_HAL using dts
2020-07-24 12:03:33 +02:00
stm32f769i_disco
drivers/ethernet: stm32: Enable Kconfig symbol ETH_STM32_HAL using dts
2020-07-24 12:03:33 +02:00
stm32g0316_disco
boards: stm32: pinmux: Restore Kconfig control on pinmux (serial)
2020-05-20 12:09:19 +02:00
stm32h747i_disco
board: arm: Enable MPU for all STM32 boards supporting it
2020-06-19 08:55:44 -05:00
stm32l1_disco
boards: stm32: pinmux: Restore Kconfig control on pinmux (i2c)
2020-05-20 12:09:19 +02:00
stm32l476g_disco
board: arm: Enable MPU for all STM32 boards supporting it
2020-06-19 08:55:44 -05:00
stm32l496g_disco
board: arm: Enable MPU for all STM32 boards supporting it
2020-06-19 08:55:44 -05:00
stm32mp157c_dk2
board: arm: Enable MPU for all STM32 boards supporting it
2020-06-19 08:55:44 -05:00
stm32vl_disco
board: arm: Enable MPU for all STM32 boards supporting it
2020-06-19 08:55:44 -05:00
stm3210c_eval
boards: stm32: pinmux: Restore Kconfig control on pinmux (serial)
2020-05-20 12:09:19 +02:00
stm32373c_eval
board: arm: Enable MPU for all STM32 boards supporting it
2020-06-19 08:55:44 -05:00
thingy52_nrf52832
zephyr: replace zephyr integer types with C99 types
2020-06-08 08:23:57 -05:00
twr_ke18f
boards: arm: twr_ke18f: enable edma
2020-07-21 08:56:51 -05:00
twr_kv58f220m
boards: arm: Remove OPENSDA_FW cmake variables from nxp boards
2020-07-09 07:58:50 -05:00
udoo_neo_full_m4
boards: arm: Conditionalize serial pinmuxes on nxp boards
2020-05-22 14:56:00 +02:00
usb_kw24d512
boards: arm: Conditionalize spi pinmuxes on nxp boards
2020-05-22 14:56:00 +02:00
v2m_beetle
zephyr: replace zephyr integer types with C99 types
2020-06-08 08:23:57 -05:00
v2m_musca
zephyr: replace zephyr integer types with C99 types
2020-06-08 08:23:57 -05:00
v2m_musca_b1
zephyr: replace zephyr integer types with C99 types
2020-06-08 08:23:57 -05:00
warp7_m4
boards: arm: Conditionalize i2c pinmuxes on nxp boards
2020-05-22 14:56:00 +02:00
waveshare_open103z
boards: waveshare_open103z: remove unused Kconfig
2020-07-02 10:55:07 -04:00
xmc45_relax_kit
boards: arm: xmc45_relax_kit: minor doc fixes
2020-06-02 15:14:45 +02:00
index.rst
doc: fix sidebar nav issues with board docs
2017-06-27 19:21:29 -04:00
734c7e053a