michaelh/zephyr
1
0
Fork 0
Code Releases Activity
zephyr/boards/arm/efr32_radio
History
Peter Bigot 9dc7640ede spi-device: set CS gpio flags for all devices that had none 
The generic SPI GPIO chip select support now respects devicetree flags
for signal active level.  Update all cs-gpios properties to specify
active low.

Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
2020-07-09 06:07:07 -05:00
..
doc boards: efm32/efr32: Enable MPU on all boards supporting it 2020-06-09 10:46:47 +02:00
support boards: arm: Add support for SiLabs EFR32BG13 BRD4104A board 2020-03-20 14:40:42 -05:00
board.c drivers: gpio_gecko: convert to DT_INST defines 2020-03-24 10:14:21 -05:00
board.cmake boards: arm: Add support for SiLabs EFR32BG13 BRD4104A board 2020-03-20 14:40:42 -05:00
CMakeLists.txt boards: arm: Add support for SiLabs EFR32BG13 BRD4104A board 2020-03-20 14:40:42 -05:00
efr32_radio.dtsi spi-device: set CS gpio flags for all devices that had none 2020-07-09 06:07:07 -05:00
efr32_radio_brd4104a.dts boards: arm: Add support for SiLabs EFR32BG13 BRD4104A board 2020-03-20 14:40:42 -05:00
efr32_radio_brd4104a.yaml boards: arm: Add support for SiLabs EFR32BG13 BRD4104A board 2020-03-20 14:40:42 -05:00
efr32_radio_brd4104a_defconfig boards: arm: Add support for SiLabs EFR32BG13 BRD4104A board 2020-03-20 14:40:42 -05:00
efr32_radio_brd4250b.dts boards: efm32/efr32: Enlarge storage_partition for nvs sample 2020-04-22 17:38:42 +02:00
efr32_radio_brd4250b.yaml boards: arm: Add support for SiLabs EFR32BG13 BRD4104A board 2020-03-20 14:40:42 -05:00
efr32_radio_brd4250b_defconfig boards: efm32/efr32: Enable MPU on all boards supporting it 2020-06-09 10:46:47 +02:00
Kconfig boards: arm: Add support for SiLabs EFR32BG13 BRD4104A board 2020-03-20 14:40:42 -05:00
Kconfig.board boards: arm: Add support for SiLabs EFR32BG13 BRD4104A board 2020-03-20 14:40:42 -05:00
Kconfig.defconfig drivers: gpio_gecko: convert to DT_INST defines 2020-03-24 10:14:21 -05:00