Move IRQ number encoding out of dts_fixup.h and into the dtsi files.
For now just change devices on the dw_intc.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The starting 192kB SRAM is reserved for the mcubootloader. Exclude
this region while building an application to be loaded by mcubootloader.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
FIFO_DEPTH should be in the SoC's Kconfig as this is a
configuration of SPI master controller in SoC.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
All text, data and bss sections are all mapped to the same physical
memory (SRAM). This patch removes the individual section limits
and defines a common limit for the sum of text, data and bss sections.
This would make it more flexible for application developers.
Fixes#11268.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
CONFIG_TEXT_SECTION_OFFSET allows the entire image to be moved
in memory to allow space for some type of header. The mcubootloader
can boot only such images which reserve some space for the header.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
Since pinmux configuration is board dependent and is now under
boards/xtensa/intel_s1000, the configuration in soc.c is removed.
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
When users are configuring applications they are given the option
to enable the DesignWare SPI driver. But they should not be given this
option on SoCs that don't have the DesignWare SPI HW.
This commit hides the driver by default by introducing the config
option HAS_SPI_DW.
Fixes: #10825
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
All drivers require DTS for their primary SPI settings.
Removing SPI_[0-9]_NAME config option added some more samples changes.
Usage of these options there was anyway not relevant.
Fixes#11064
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The majority of cases of CONFIG_I2C_x_IRQ_PRI should be
DT_I2C_x_IRQ_PRI. So go ahead and fix them up. Only the i2c_nios
driver still uses Kconfig for getting priority.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The firmware starts us with an already-initialized UART and a simple
ROM hook. Use that as the default printk handler so we can log in
very early boot. It will be overriden later (as it happens, by
another handler based on the same firmware hooks).
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This can help find unused symbols. Those end up without a type if
'default' is used instead of 'def_bool', which generates a warning.
Search for "Kconfig.defconfig" in
https://docs.zephyrproject.org/latest/application/kconfig-tips.html for
a longer explanation.
Keep the 'def_bool' for the following symbols, which seem to be
deliberately defined only in Kconfig.defconfig files:
- ALTERA_AVALON_I2C
- ALTERA_AVALON_MSGDMA
- ALTERA_AVALON_PIO
- ALTERA_AVALON_QSPI
- ALTERA_AVALON_SYSID
- CLOCK_CONTROL_IMX_CCM
- CPU_EM4_DMIPS
- CPU_EM4_FPUDA
- CPU_EM4_FPUS
- FP_FPU_DA
- I2C_GECKO
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
These changes were obtained by running a script created by
Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following
specification:
1. Read the contents of all dts_fixup.h files in Zephyr
2. Check the left-hand side of the #define macros (i.e. the X in
#define X Y)
3. Check if that name is also the name of a Kconfig option
3.a If it is, then do nothing
3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it
has neither of these two prefixes
4. Replace the use of the changed #define in the code itself
(.c, .h, .ld)
Additionally, some tweaks had to be added to this script to catch some
of the macros used in the code in a parameterized form, e.g.:
- CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS
- CONFIG_UART_##idx##_TX_PIN
- I2C_SBCON_##_num##_BASE_ADDR
and to prevent adding DT_ prefix to the following symbols:
- FLASH_START
- FLASH_SIZE
- SRAM_START
- SRAM_SIZE
- _ROM_ADDR
- _ROM_SIZE
- _RAM_ADDR
- _RAM_SIZE
which are surprisingly also defined in some dts_fixup.h files.
Finally, some manual corrections had to be done as well:
- name##_IRQ -> DT_##name##_IRQ in uart_stm32.c
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
We now place the linker directives for the SW ISR table
in the common linker scripts, instead of repeating it
everywhere.
The table will be placed in RAM if dynamic interrupts are
enabled.
A dedicated section is used, as this data must not move
in between build phases.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add a linker script entry for embedding a GNA model at a
4KB page aligned address in .data section
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
XCC does not support the "-undef" flag so set NOSYSDEF_CFLAGS to
empty string to fix compile warning.
Also, XCC does not supply the macro __SIZEOF_LONG__ which breaks
the build. So define it.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Remove the auto-generated `handle_irq` label for the unneeded cases
to get rid of a compile warning.
Fixes#10801.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
When users are configuring nRF applications they are given the option
to enable the DesignWare I2C driver. But they should not be given this
option because nRF SoCs do not have DesignWare I2C HW.
This commit hides the driver by default by introducing the config
option HAS_I2C_DW.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
This adds the necessary bits to support ASM2 with XCC
for Intel S1000 SoC. With ASM2 enabled, xcc is now
required to build for Intel S1000 SoC.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
(Previous patch set was reverted due to issue with priv_stack.
Resubmitting after fixing the faults caused by priv_stack.noinit
not at the end of RAM.)
This adds a linker flag and necessary changes to linker scripts
so that linker will warn about orphan sections.
Relates to #5534.
Fixes#10473, #10474, #10515.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Call to soc_get_ref_clk_freq function is redundant in soc.c as it
simply returns a global static variable. Hence removed that call.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
Mux configuration for I2C and GPIO are now done in SYS_INIT
which were earlier done in the respective tests.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
This adds a linker flag and necessary changes to linker scripts
so that linker will warn about orphan sections.
Relates to #5534.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The Zephyr configuration system uses many different files in many
different formats. It makes it a lot easier for users to understand
what these files do if when we use the correct file extensions.
To this end we rename the dts.fixup files to the correct file
extension '.h'.
This is a breaking change for out-of-tree fixup files. Such files will
be detected and given an appropriate error message.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The return of memset is never checked. This patch explicitly ignore
the return to avoid MISRA-C violations.
The only directory excluded directory was ext/* since it contains
only imported code.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Move the SoC outside of the architecture tree and put them at the same
level as boards and architectures allowing both SoCs and boards to be
maintained outside the tree.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
