Replace:
dt_chosen_reg_addr
dt_chosen_reg_size
dt_node_reg_addr
dt_node_reg_size
with:
dt_chosen_reg_addr_int
dt_chosen_reg_size_int
dt_chosen_reg_addr_hex
dt_chosen_reg_size_hex
dt_node_reg_addr_int
dt_node_reg_size_int
dt_node_reg_addr_hex
dt_node_reg_size_hex
So that we get the proper formatted string for the type of symbol.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Now that everything is DT based for I2C drivers we can rename the
CONFIG_I2C_[0..5]_NAME define to DT_I2C_[0..5]_NAME.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add binding for arm,mps2-fpgaio-gpio and update device tree and change
FPGA GPIO init code to utilize device tree defines.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Configures the default sdhc driver for the imx rt soc series so
applications don't have to configure it explicitly.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Unused after commit 4973787c10 ("pinmux: Remove the k64 pinmux driver").
Found with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Move the selection of the IP clock source for the modules in the NXP
Kinetis KE1xF SoCs from being hardcoded in soc.c to being specified in
the device tree.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add missing definitions for the base addresses of the NXP LPUARTs to
the NXP KE1xF SoC DTS fixup.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
it's bug found after implementing direct irq support,
nsim_hs has the same number of interrupts available
as nsim_em
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Depending on LiteX configuration, CSRs
(control&status registers) might be split
into several consecutive registers.
This introduces common helper functions
for all LiteX drivers providing access
to CSRs for a default LiteX configuration
(data_width = 8bit, bus_width = 32bit).
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
For nordic_nrf, this commit relocates HAS_CMSIS_CORE selection from
SoC Kconfig to the HAL module Kconfig, as done for other SoCs.
For nxp_kinetis, remove redundant HAS_CMSIS_CORE selection in SoC
Kconfig, as it is already selected by the HAL Kconfig.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates all references to HAS_CMSIS to use HAS_CMSIS_CORE
instead. With the changes introduced to allow multiple CMSIS variants
to be specified, the latter is semantically equivalent to the former.
For more details, see issue #19717.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
STM32L151XB-A SoC is almost similar to the STM32L151XB SoC except that
it has more RAM (32KiB). Hence add devicetree and Kconfig support.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Remove the inclusion of kernel_includes.h from soc.h and replace
it with including the board-specific auto-generated headers. This
aligns the soc.h header with the current policy not to include
kernel headers in soc.h.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We enable Memory Protection on stm32 nucleo_g071rb board,
since the respective SoC series implements the ARM MPU.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Remove the
# Omit prompt to signify a "hidden" option
comments that appear on some symbols. They seem to have been copy-pasted
at random, as there are lots of promptless symbols that don't have them
(that's confusing in itself, because it might give the idea that the
ones with comments are special in some way).
I suspect those comments wouldn't have helped me much if I didn't know
Kconfig either. There's a lot more Kconfig documentation now too, e.g.
https://docs.zephyrproject.org/latest/guides/kconfig/index.html.
Keep some comments that give more information than the symbol having no
prompt.
Also do some minor drive-by cleanup.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
STM32L1 uses the same spi controller as STM32F1 so we can just set the
right addresses and enable them. We also need to add the fixup names and
to correctly include the header for ST LL HAL.
Signed-off-by: Karl Palsson <karlp@etactica.com>
This will be used for both 32-bit and 64-bit mode.
This header gets pulled in by x86's arch/cpu.h, so put
it in include/arch/x86/.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Move systick activation in soc/ as a Kconfig.defconfig file and
remove activation in boards _defconfig files.
This will allow to deactivate it in a more flexible way
with upcoming LPTIMER as tick source when power management
features are enabled.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
For LL header inclusion, use _STM32 Kconfig symbol
(related to the driver), rather than generic symbol,
that could theoretically use an alternate solution.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The patch adds initial support for STM32F030X4 SoC.
STM32F0 Cube package advises to use 'stm32f030x6' code
for both STM32F030x4 and STM32F030x6 SoC variants.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Add duplicate per-CPU data structures (x86_cpuboot, tss, stacks, etc.)
for up to 4 total CPUs, add code in locore and z_arch_start_cpu().
The test board, qemu_x86_long, now defaults to 2 CPUs.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Add soc and dts files to support for most of the common peripherals
in the STM32G4 series. Add specific support for the STM32G431RB.
Signed-off-by: Richard Osterloh <richard.osterloh@gmail.com>
Add KConfig board support to match board jumper settings
Failing to update bank selection will affect GPIOs tied to VTR3
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
This patch re-namespaces global variables and functions
that are used only within the arch/arm/ code to be
prefixed with z_arm_.
Some instances of CamelCase have been corrected.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is part of the core kernel -> architecture interface and
has been renamed z_arch_kernel_init().
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
k_cpu_idle() and k_cpu_atomic_idle() were being directly
implemented by arch code.
Rename these implementations to z_arch_cpu_idle() and
z_arch_cpu_atomic_idle(), and call them from new inline
function definitions in kernel.h.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
