This patch enables time stamping controlled by DSP Timers / Time Stamping
logic on ACE1.5 / ACE2.0 platforms.
Signed-off-by: Tomasz Lissowski <tomasz.lissowski@intel.com>
The soc.c interrupt-related definitions are supposed to
provide support for multi-level interrupts. At the moment,
the way the functions work is they only process the LEVEL 1
interrupt from the encoded INTID and treats the provided INTID
as if it were simply a LEVEL 1 interrupt, which is wrong. Another
issue with soc.c is the fact that the definitions from it clash
with the ones provided by the IRQSTEER driver. To fix this, remove
the soc.c file altogether and change the corresponding CMakeLists.txt
to only contain the necessary statements.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
With GCC 12.3 and binutils 2.40, the build fails with:
<...>/zephyr/arch/arm/core/cortex_m/cpu_idle.S: Assembler messages:
<...>/zephyr/arch/arm/core/cortex_m/cpu_idle.S:51: Error: junk at end of line, first unrecognized character is `n'
<...>/zephyr/arch/arm/core/cortex_m/cpu_idle.S:133: Info: macro invoked from here
Because the SOC_ON_EXIT_CPU_IDLE macro puts all the statements on a
single line, there must be a semicolon after .rept
Signed-off-by: Ben Wolsieffer <benwolsieffer@gmail.com>
Since it takes 400 bytes of code and it is rarely used disable
by default this feature.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
If CONFIG_LEGACY_CLIC is disabled, i.e. we adhere to the current CLIC
spec, the mode bits of mtvec have to be 0x3. Everything else is
reserved. Therefore if CONFIG_RISCV_VECTORED_MODE is enabled, the
current implementation is correct. If CONFIG_RISCV_VECTORED_MODE is
disabled, the mode bits have to be set, too.
Signed-off-by: Greter Raffael <rgreter@baumer.com>
Add support of voltage control to Renesas PFC driver. Voltage register
mappings have been added to r8a77951 and r8a77961 SoCs.
Allow 'power-source' property for 'renesas,rcar-pfc' node. This property
will be used for configuring IO voltage on appropriate pin. For now it
is possible to have only two voltages: 1.8 and 3.3.
Note: it is possible to change voltage only for SD/MMC pins on r8a77951
and r8a77961 SoCs.
Signed-off-by: Mykola Kvach <mykola_kvach@epam.com>
Setting IT8XXX2_EGPIO_EEPODD bit will disable EGAD pin output driving
to avoid leakage when GPIO E1/E2 on it82002 are set to alternate
function.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
Signed-off-by: Dino Li <Dino.Li@ite.com.tw>
When exiting power gated state, call the CPU start function
passed to arch_start_cpu().
Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The place where TF-M places its non-secure api header files has changed
Therefore changing it for for all applications that use it.
Signed-off-by: Markus Swarowsky <markus.swarowsky@nordicsemi.no>
Clock DMIC0 from the audio PLL when DMIC driver class is enabled.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Co-authored-by: Yves Vandervennet <yves.vandervennet@nxp.com>
Use 'switch' to emphasise that we're handling different values of
'state' in pm_state_set().
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
'ret' in pm_state_set() is always set before it's used, no need to
initialise it.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Add RGPIO gpio driver. This driver is used for i.MX93 and i.MX8ULP.
GPIO pinctrl, read/write and interrupt is supported. Runtime mmio
configuration is enabled, so no need for region definition in
mimx9/mmu_region.c
Signed-off-by: Chekhov Ma <chekhov.ma@nxp.com>
pm_device_runtime_get() must be called after pd_intel_adsp_init() is
called for each device, because the latter calls
pm_device_runtime_enable(), which sets the device runtime PM use
count to 0. The current wrong calling order causes a DSP panic
because of an unbalanced pm_device_runtime_put(). Fix this by
delaying pm_device_runtime_get() until the POST_KERNEL initialisation
step.
Fixes commit c3a6274bf5 ("intel_adsp: ace: power: Prevent HST
domain power gating")
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Now that:
1 - LS Clocks sources values are identical accross series
2 - We're able to extract this value from device tree
define STM32_LPTIM_CLOCK choice symbol from device tree
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
For a CLIC the vector table has to be aligned by 512 bytes, if there are
between 65 and 128 interrupts, which is the case for the gd32vf103.
`isr_wrapper` has to be aligned to 64 bytes, s.t. the lower 6 bits of
mtvec are 0.
Signed-off-by: Greter Raffael <rgreter@baumer.com>
For a proper initialisation, the soc-specific `__nuclei_start` has to
be executed before the common `__start`. To ensure that `__nuclei_start`
is linked first, I added the linker section init.
Signed-off-by: Greter Raffael <rgreter@baumer.com>
A lot of the entry.S is again implemented in common/vector.S.
I removed everything redundant and changed the jump to the common
symbol __start at the end.
Signed-off-by: Greter Raffael <rgreter@baumer.com>
.bss and .data are uncached in Zephyr builds for intel_adsp. No need
to try to manipulate cache of objects in those sections.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Instead of custom SOC_MCAUSE_EXP_MASK definition. Note that SoCs
selecting RISCV_PRIVILEGED already used such config indirectly (see
changes in soc_common.h).
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
The MCAUSE register has the "Interrupt" flag defined defined at XLEN-1
position (31 for 32-bit, 63 for 64-bit). This is not an SoC specific
option, and there's no need to expose it publicly.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
As defined in Table 3.6 of "The RISC-V Instruction Set Manual, Volume
II: Privileged Architecture". Delete all spread definitions of the same,
weirdly prefixed with "SOC".
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
SOC_ESP32_NET is now SOC_ESP32_APPCPU, following espressif's
naming convention in the same manner as ESP32S3 app cpu.
SOC_ESP32_APPCU is now a subset of SOC_SERIES_ESP32.
This commit also changes the necessary files, samples and tests
for bisect purposes.
Signed-off-by: Lucas Tamborrino <lucas.tamborrino@espressif.com>
Commit 447a492 switched to `sys_cache*` to enable caches at SoC init. To
preserve the old behavior of enabling caches at init, is missing to
select `CONFIG_CACHE_MANAGEMENT`.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Because it was exclusively used by the "common" RISC-V privileged code
to build CPU idle routines that are now handled by arch level code.
Also, all platforms defaulted to "y", making it pointless in practice.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Since d992683db5 (soc: arm: replace redundant config option for
caches for nxp_imx), RT1xxx series will not have cache enabled at boot
unless CONFIG_CACHE_MANAGEMENT=y. Since this will improve performance,
enable CONFIG_CACHE_MANAGEMENT by default.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
This patch enhances the power-down sequence for the HOST (HST) domain
within the Intel ADSP ACE 1.5 architecture. It introduces a check to
ensure that a specific condition, represented by a magic key value, is
met before disabling the HST domain. This additional verification step
ensures that the HST domain is only powered down when it is safe to do
so, thereby maintaining the stability and reliability of the system.
Signed-off-by: Tomasz Leman <tomasz.m.leman@intel.com>
This patch introduces power management for the HOST (HST) domain within
the Intel ADSP ACE IP. It adds macros to access the node identifier and
device pointer for the HST power domain and integrates power management
calls into the system initialization and power state transition
functions.
The patch ensures that power gating of the HST domain is prevented when
the primary core of the audio DSP is active. Preventing power gating is
crucial for maintaining the functionality of the HST domain while the
primary DSP core is performing critical tasks.
Signed-off-by: Tomasz Leman <tomasz.m.leman@intel.com>
Gigadevice was inconsistent with the convention established by other SoC
families, that is, use <vnd_prefix>_<family>. For example, ST STM32 uses
st_stm32. Note that GD32VF103, under soc/riscv, has already been
adjusted.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Use sys_cache* functions to enable the caches for stm32f7 and
stm32h7. This ensures that CONFIG_CACHE_MANAGEMENT is
considered correctly.
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
Use the sys_cache* functions to enable the caches on same70 and
samv71. This will ensure that CONFIG_CACHE_MANAGEMENT is
considered correctly.
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
Remove the redundant cache config options for kv5x and use
the sys_cache* functions to enable the caches. This will automatically
consider CONFIG_CACHE_MANAGEMENT.
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
Replace the redundant cache config options for the nxp_imx and
use sys_cache* functions to enable the caches. These will automatically
consider CONFIG_CACHE_MANAGEMENT.
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
Use sys_cache* for enabling the caches in nxp_s32. This automatically
considers CONFIG_CACHE_MANAGEMENT and will activate the
cases only if this is active.
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
This option is no longer needed, all SoCs have been moved out from
soc/riscv/riscv-privileged folder.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
