This commit changes the syntax of the testcase files and changes the
behaviour and configuration of the sanitycheck script.
To avoid having multiple files with different syntax for boards,
samples, tests; this change unifies the syntax and uses YAML instead of
INI.
We maintain the current keywords used in the old syntax and maintain the
flexibility of adding tests with different configuration by using YAML
list configuration. On top of that, the following features are added:
- We now scan for board configurations in the boards directory and look
for a YAML file describing a board and how it should be tested. This
eliminates the need for listing boards per architecture in a special ini
file under scripts/.
- We define hardware information charachterstics in the board YAML file
that helps identifying if a certain test should run on that board or
not. For example, we can specify the available RAM in the board and
filter tests that would require more RAM than the board can handle.
- Boards can be set as default for testing meaning that we always run a
test case (build and run of possible) when sanitycheck is called without
any arguments. Previously this was done only by selecting the first
board defined for a specific architecture.
- Tests can be configured to run on all possible boards, this is to make
sure we always build some basic tests for all boards to catch issues
with the core kernel features.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
- board name olimex_stm32_e407
- CPU STM32F407ZGT6 Cortex M4
- LED/BUTTON support
- Console on USART1 with 8n1 115200 baud
Signed-off-by: Erwin Rol <erwin@erwinrol.com>
Add necessary board files, pinmux and device tree in order to have a
usable debug console.
Origin: Original
Change-Id: I43a9d278c3f2c936a714263626722f630367b663
Signed-off-by: Florian Vaussard <florian.vaussard@heig-vd.ch>
The stm32f4discovery was incorrectly named and should have been
stm32f4_disco. Also added 96b_carbon_nrf51 that was missing from the
list.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add configuration, pinmux, dts and documentation for the STM32L496G
Discovery board based on the STM32L496AG SoC.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Now that we can specify what toolchain is intended for each
SOC, enable some more SOCs to be built.
A full sanitycheck run will require the installation of both
RF-2016.4 and RG-2016.4 releases.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add necessary board files, pinmux and device tree in order to have a
usable debug console.
Origin: Original
Change-Id: I280320700352fd36a544c03f4e57d2eeec2449e5
Signed-off-by: Florian Vaussard <florian.vaussard@heig-vd.ch>
This core configuration was removed from the tree since it cannot
implement irq_offload().
Remove an orphaned block in xtesna.ini.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add configuration, dts and documentation for the Nucleo L432KC board
based on the STM32L432KC SoC.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
This commit provides support for disco_l475_iot1 board
Pinmux driver is provided with initial support definitions
Change-Id: I17b637a8ba0b033014969eca8fffe76319c47c52
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
In order to allow the use of such board, a very preliminar port was
developed. It consists of board files, as well as pinmux, uart, gpio,
spi drivers and device tree files.
Change-Id: I5753064e39e0b023cf4481744c176de26d8dbebb
Signed-off-by: Gustavo Denardin <gustavo.denardin@gmail.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
CC3220SF_LAUNCHXL effectively replaces the CC3200_LAUNCHXL,
with support for the CC3220SF SoC, which is an update for
the CC3200 SoC.
This is supported by the Texas Instruments CC3220 SDK.
Jira: ZEP-1958
Change-Id: I2484d3ee87b7f909c783597d95128f2b45db36f2
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Adds initial support and documentation for the frdm_kw41z board.
- Configures the kw41 to use the 32 MHz external oscillator on the board
to generate a 40 MHz system clock. The clock settings match the MCUX
SDK hello_world example project.
- Provides pinmux settings for the uart, i2c, LEDs, and switches
- Enables pinmux, gpio, uart, and i2c driver instances
- Configures the fxos8700 accelerometer/magnetometer driver
Jira: ZEP-1390
Change-Id: I025a0eae3d380eaf90b02683acf5c592e2204a2e
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This reverts commit 9fb0c2af5c.
SDK 0.9 has now been released.
Change-Id: I676b6f0e31ab48fde3dda41b681abf53964ea9f9
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The 0.9 SDK is not released yet!!
This reverts commit 7995e6207c.
Change-Id: I550d1aa27ba7a06ff2cda09496ceb92645a17460
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
ARM's Cortex-M Prototyping System (MPS2) is a board with an FPGA that
can be programmed with different 'SoCs'. To use these in Zephyr we need
a set of board files for each variant.
This adds a board for a variant which implements a Cortex-M3 CPU; the
naming of this matches that used for the Zephyr SoC (which is itself
based on ARM's documentation nomenclature).
Change-Id: Ie02a67a03016b8aeee31e3694f0edbcc37f9ee64
Signed-off-by: Jon Medhurst <tixy@linaro.org>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Added sanity args to be used by the compare footprint.
Please notice that compare footprint use sanitycheck to
build footprint apps for base commit and for current commit.
This in order to collect the information and generate the diff.
Change-Id: I6f86bbfa020999b3f26e93a608fc7b34ee508e10
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
With the appearance of the nRF52840 IC a new Preview Development Kit
(PDK) board has been introduced. This patch adds basic support for this
new board.
JIRA: ZEP-1418
Change-Id: If5845e75312ec756b968e595e5dc31c4c9624be2
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add board support for the Nucleo64 L476RG development board.
Change-Id: Ibb5424bc936c67a5d96855617202136d7dea772c
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Update file to catch any regressions and major changes during
stabilisation period.
Change-Id: Id30dd1827034b96c5478c78f9c388384f51bcbec
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add board support for ARM V2M Beetle platform.
ARM V2M Beetle board is build around the ARM Beetle Cortex-M3
based processor.
The support has been tested in nanokernel mode with the bringup
application that will be pushed with a future patch.
Jira: ZEP-1245
Change-Id: Ib05a40c072f10149e692283177387cf2cfe32f66
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The Quark SE C1000 BLE Core is a nRF51822-QFAA, with 16kB of RAM and
256kB of flash. The configuration is otherwise similar to the Arduino
101 BLE, except that the UART RTS pin is the same as that used by
nrf51_pca10028.
Change-Id: I88cb18876bdde65abcf9a499894f70802046c824
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Added Kconfig and makefiles to be able to build a Zephyr application
on Linux/gcc, and load via OpenOCD.
Validated by running the hello world, and philosophers microkernel
samples, and stepping through the code in gdb.
Jira: ZEP-1109
Change-Id: If5d3e7b1a8ecf5ecf6a00f147742b3bc5716190f
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Now that these platforms pass sanitycheck add them into the list of
platforms we support
Change-Id: If559c80e107505e6b98f81c0e94b9862618b1735
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add support for the STM32F401 chip on the board
Change-Id: I96c0799f3658ecea096fa5971bce9faf21919ee1
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
build footprint test as part of the main sanitycheck job, we do not run
the script comparing footprint anymore, it will move to somewhere else.
Change-Id: I36d475bfc3d985bf06a872649eae8c19e1a43aa4
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This directive is the default, no need to have an ever-expanding
enumeration of these.
Change-Id: Ic5147fe04de033cb7e97fc5cbe45edd1779d1120
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The BLE core on the Arduino 101 is an nRF51822 QFAA (256kB flash, 16kB
RAM).
Change-Id: Ia802b3eb634c0cd6775c4059c9569bccd915a578
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
With this patch we introduce unified kernel support for NIOS II.
Not all test cases have been ported, but the following command
currently succeeds with 43/43 passing test cases:
$ sanitycheck --arch=nios2 -xKERNEL_TYPE=unified \
--tag=unified_capable
Issue: ZEP-934
Change-Id: Id8effa0369a6a22c4d0a789fa2a8e108af0e0786
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Python module argparse has a feature to load arguments from a file.
This commit enables such feature on sanitycheck script so files
prefixed by + (plus sign) are loaded during argument parsing stage
and included as arguments to such script.
Jira: ZEP-122
Change-Id: Ibb0a6e8464218a4f58ce4044a5a0860dc5b32480
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
Drop the _m3 from the test name since this can run on M0, M3, M4, etc.
Change-Id: Ia12ece62fc7b42e28f37e191c90c0dead48d40d0
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit allows building tests using the ztest framework without
including Zephyr. This can be used to enable unit testing single
functions, even static ones.
Origin: Original
Change-Id: Ib7e84f4bd9bbbf158b9a19edaf6540f28e47259f
Signed-off-by: Jaakko Hannikainen <jaakko.hannikainen@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Point to a new wiki page for the documentation. The old page can be removed
once this patch is committed.
Change-Id: I2b031bfffe10ec24c41c58d0754f2b14d95f5e53
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
The Zephyr documentation states that the ARM GCC embedded toolchain is
supported for ARM platforms so lets add a reference to allow sanitycheck
to build with this configuration. This patch fixes 4b554baa87
("sanitycheck: support for multiple toolchain").
Change-Id: I5578a3c78432219e2ba4d7393899d54c818c5c17
Signed-off-by: Tyler Baker <tyler.baker@linaro.org>
Added support for multiple toolchain usage.
Every arch contains a list of supported toolchain.
Each board can override the supported toolchain list.
If the board is not supported in the current toolchain,
will be discarded.
The current toolchain is defined by ZEPHYR_GCC_VARIANT.
Added support for toolchain ISSM and ZEPHYR.
Change-Id: I31e9b39ba01f6e9bdc4557702428cd09e05f492a
Jira: ZEP-592
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
The per-platform blocks were just specifying defaults and didn't
need to exist.
Change-Id: I9f4c7db4cd16417d5a2c172c3f850f7758dcbd00
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Microkernel on ARC works fine, was missing some declarations in the
linker file.
Also enable testing of microkernel with ARC and disable tests where
ARC is not supported yet.
Jira: ZEP-396
Change-Id: I2ac7b8dc0bea22f5d2e24832d9e3afad8df9f580
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The ordering of the list of platforms is in priority order,
as the sanitycheck --platform-limit option chooses the first
N platforms in this list when doing a run. Move arduino_101 to
second position. qemu_x86_iamcu is still top priority as it
can execute code as part of the tests.
Change-Id: I989d91c66a0a741ce8eebe6279ee4512c33eb5e9
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Rationale for defaulting to IAMCU variant is that our most
interesting x86 boards use this calling convention. --all
will test both.
Change-Id: Idaddfec51a74ae85691d348adeeb88a8528060ea
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This board is not supported and not available for general public.
Use the Quark SE CRB/Devboard instead.
Change-Id: Id0f8c08bbacb812ef00fe9502b4acecf4f31ffd7
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We have moved tests around, update the files to get accurate footprint
changes per test case.
Change-Id: I563acef4665cb0ab6d3e7e01050a3a49f98b8b9d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This enables sanitycheck to build for Arduino Due.
Note that there is no on-board bluetooth so bluetooth tests
are skipped.
Change-Id: I4f564e68ec65f01b7b33a32f6d0d7749290c0e5b
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Shorten the name and remove the vendor prefix. No need to add
vendor to board names.
Change-Id: I68d441121c4034276706da63d7e5420ddf317149
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
() Adds board arduino_101, arduino_101_sss to sanity check.
This will build the tests against these two new boards
to catch issues.
() Updates existing sample apps to be arduino_101_sss instead of
quark_se_ss, due to renaming of boards.
Change-Id: Ic512728d2ce581539bc3ae4c9f6524d5bf01b296
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Use a real board name that can run this kernel instead of a generic
name. Basic functionality exits on this board with Zephyr.
Setup of the board is mostly similar to what we have in galileo (EFI
based)
Change-Id: Ic8554f26dcac0dbbbb6d35d863482f6207dc63c5
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit also renames boards and makes naming consistent between
board name and defconfig files.
quark_d2000_reference -> quark_d2000_crb
quark_se_test_sss -> quark_se_sss_ctb
quark_se_test -> quark_se_ctb
Change-Id: Ibe6a5102edb987fe1d6ce32c8c392a87d45d6951
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Define boards based on platforms/SoCs and define them under boards/.
Also unify the naming of all platform, SoC and board files and use
platform.h for platforms and board.h for boards.
Change-Id: Icfeb96479ab5800aca98c80a79bdc3cecd645314
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
First step for adding the new board layer. Create configurations for the
various boards we support on x86 under boards with the new Kconfig variables
defining them.
The board selection is optional, that means you will be able to run
make menuconfig
and create your own .config and select any SoC.
Change-Id: If08e88e9675d13f0f0501ef6750b9424b15f5dc8
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Setting up new platforms to handle emulation, and make them the only
ones able to run on QEMU from the Makefile "qemu" target to avoid
confusion with other platforms. We have now platform qemu_x86 and
platform qemu_cortex_m3, also modification to the sanity checks to have
qemu support only on those platforms
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Change-Id: I9291918a1d58fea4f37750ada78234628f9a5d98
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This platform if actually a subsystem of the Quark SE SoC and is
not standalone. Use a more descriptive name and remove the architecture
from the platform name.
Change-Id: I16b1ab8dd668441683b07fc4512c219924463441
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Run sanitycheck with --release option to generate the numbers for
this release.
This will reset the footprint numbers so that warnings are based on
the latest release numbers.
Change-Id: Ibad9ed4120cd47109eec7a234e70af5b12a2a630
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The generic name is too generic and when it appears on its
own, for example nano_generic_defconfig, it is not
visible what the file is about, so call it generic_arc the same
way the Kconfig platform is called.
Change-Id: Icf737f305d84142dad4f52fd26a5c7481f9fc5be
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add ARC to the list of architectures sanitycheck will build against.
Change-Id: Ibf1aa3a167a7a53a59b40bde4442d16f7d7b9611
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
This adds unit test for microkernel private memory maps.
The code piggybacks to the public memory map test (by
including the same source file), so any updates to
the test will be applied to both.
Note that the prj.mdef are different for both tests, since
the private memory maps test move the memory maps inside
source code. So, both mdef files will need to be updated at
the same time.
Change-Id: Ia7f65f55b61d9fb0d42ba58d63662e914d69194e
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds unit test for microkernel private pipes.
The code piggybacks to the public pipe test (by
including the same source file), so any updates to
the test will be applied to both.
Note that the prj.mdef are different for both tests, since
the private pipes test move the pipes inside source
code. So, both mdef files will need to be updated at
the same time.
Change-Id: I6fdb5eab7c3a1d6f4b72c26a3620cee0188b07a5
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds unit test for microkernel private tasks.
The code piggybacks to the public task test (by
including the same source file), so any updates to
the test will be applied to both.
Note that the prj.mdef are different for both tests, since
the private tasks test move the tasks inside source
code. So, both mdef files will need to be updated at
the same time.
Change-Id: I2890f70be460c0e45208ce03d6e7897d2662f6f0
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds unit test for microkernel private mailboxes.
The code piggybacks to the public mailbox test (by
including the same source files), so any updates to
the test will be applied to both.
Note that the prj.mdef are different for both tests, since
the private mailboxes test move the mailboxes inside source
code. So, both mdef files will need to be updated at
the same time.
Change-Id: I52ccc5931b1abfd3ae3d654f888d4a019268bba0
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds unit test for microkernel private FIFOs.
The code piggybacks to the public FIFOs tests (by
including the same source file), so any updates to
the test will be applied to both.
Note that the prj.mdef are different for both tests, since
the private FIFOs test move some of the FIFOs
inside source code.
Change-Id: I4130ac540b10a31cd30f37890e9cc389af73e89b
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds unit test for microkernel private semaphores.
The code piggybacks to the public semaphores tests (by
including the same source files), so any updates to
the test will be applied to both.
Note that the prj.mdef are different for both tests, since
the private semaphores test move some of the semaphores
inside source code.
Change-Id: Ic318bf6808514c5d335a46cb3e88ebf6000f4c3e
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The online help ./scripts/sanitycheck --help describes usage.
Most users will simply want to run with no arguments.
Change-Id: Icedbbfc22599a64a6e3dbbb808ff3276db06f2e0
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The bluetooth regression script now refers to PLATFORM_FLAG instead of the
obsolete BSP_FLAG variable.
Change-Id: I8cafc01b66004c7bdd76c03d3f3b6aeba134565d
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Renames supported platform configurations to conform to new platform
configuration naming scheme.
Example usage with PLATFORM_CONFIG:
make PLATFORM_CONFIG=basic_cortex_m3
make PLATFORM_CONFIG=basic_atom
make PLATFORM_CONFIG=basic_minuteia
make PLATFORM_CONFIG=galileo
xxx_ti_lm3s6965_defconfig -> xxx_basic_cortex_m3_defconfig
xxx_generic_pc_atom_n28xx_defconfig -> xxx_basic_atom_defconfig
xxx_generic_pc_minuteia_defconfig -> xxx_basic_minuteia_defconfig
xxx_quark_defconfig -> xxx_galileo_defconfig
Change-Id: I696eb8b9ad9a72d7a72efbe1341ce23500335764
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Uses PLATFORM_CONFIG to specify the configuration file instead of
KBUILD_DEFCONFIG. This name is more intuitive to Zephyr users and
it is not tied to kbuild.
Example usage:
make PLATFORM_CONFIG=generic_pc_atom_n28xx
make PLATFORM_CONFIG=generic_pc_minuteia
make PLATFORM_CONFIG=quark
make PLATFORM_CONFIG=ti_lm3s6965
make PLATFORM_CONFIG=fsl_frdm_k64f
Change-Id: I177608942c3e77c2f152743c862aad1d460c0e33
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Replaces the default executable target (generic_pc_minuteia) with
generic_pc_atom_n28xx. This ensures that sanity testing can evaluate
two different x86 processors just as it did before generic_pc_pentium4
was removed.
Change-Id: Iad439d8465811e9e45f02e9516ce3e6d65d7c1ed
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Marks the generic_pc_atom_28xx platform configuration as a default executable
target. This is desirable as the removal of generic_pc_pentium4 removed an
executable target from the sanity test suite.
Change-Id: Ic990a003ff23367199164dfcc434c033d78abaac
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Removes the generic_pc_pentium4 platform configuration from the sanity tests
as the pentium4 is not considered an essential target for Zephyr.
Change-Id: I804ad44c4157f40a501ae56b928b57b2003d2415
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
This allows to easily checks if all samples builds with supported
configurations. Also tester application is (unlike other samples)
build with all Bluetooth debugs enabled.
Change-Id: Ia151b97d14c75b0509243e2c1dc8d26211f70e83
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Add build test for beacon app for following targets: pentium4 and
ti_lm3s6965.
Change-Id: I4b8949b4f21d3554465bbf8c229462c026db5e29
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
export TMP if you want the out of tree tests to write
to something else other then /tmp
Change-Id: I77b1dffe5fa5e61db66a8d754370a0cd47511ab4
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Enables sanity to run out-of-sanity checks on a set of sample projects.
Change-Id: I58ae894b326a6eb15d6d56bc8e95738d21e17245
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Deprecates (and hides) the -B option in favor of using the -P option.
The -B option is used to specify the BSP, whereas the -P option specifies
the platform.
Change-Id: Ie1d3cd6383f08a84e5d994221b253153152a0658
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The -s option to sanity_chk became obsolete with the switchover to Kbuild.
Change-Id: I6ab68692aea39e4289520613b53a46320044fcfb
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The sanity scripts no longer use the deprecated method specifying the BSP (and
the optional BSP_VARIANT). Instead, they now use KBUILD_DEFCONFIG to identify
the target platform.
Change-Id: I583f876afd006e66fc314b8913cd766ba9d2b764
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Completes the separation of data from the sanity scripts.
Change-Id: Icc7a4922d5f108ca54d2c2f08b192259b07b3a0e
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
These data files will eventually replace the project list tables that are
currently defined in the various sanity checks.
Change-Id: I1b9aef528ff2acc1ba96fa540986c50e01032f68
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the set of strings stored in $PRJ_TYPE from
{"microkernel", "nanokernel"} -> {"micro", "nano"}.
The $PRJ_TYPE variable will be used in later commits to create the
$KBUILD_DEFCONFIG string.
Change-Id: I9e2d866d4277ffaccff4f84a42ec2bc75c2ce57a
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Moves the Bluetooth regression script 'bt_regression.sh' so that it resides
in the same directory as the other sanity scripts. It also renames it to
'bt_regression_chk' so that its name is consistent with the other sanity
scripts.
Change-Id: Ia5a683e2c370c91a90edc648634ce56e484dcc20
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
KLIB_DIR builds are a relic from the previous build system.
Change-Id: I382db45f0a21786e1b7c50c9a881c82feb2c7481
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
There is no longer any need to retain any support for this option
as a "do nothing" for backwards compatibility reasons.
Change-Id: I4b8fa727f80effdcc3fd92007fc9c50654291175
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Updates this environment variable to reflect the new OS name.
(Note: Out-of-tree builds are not yet supported.)
Change-Id: If26264c39a98d76c418f07be88ecb196f34fba1c
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Since the build system now supports only one toolchain, the
VXMICRO_TOOL environment variable is obsolete. The sanity
check scripts that reference this symbol are revised accordingly.
(Note: As a temporary measure, the main sanity check script
continues to accept the -T option; however, the option has no
effect.)
Change-Id: I383b128b9f5b07164abb7ddeb5a699d819a20316
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Test project is no longer needed, since the associated library
is now scheduled for removal.
Change-Id: I843018e647c4bdc82c785ae21dbfa9de608c0d50
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This commit enables the outdir directory.
Kbuild output files will be generated at the outdir directory
inside the project directory.
Change-Id: Icec04aca1753326c9d50dea20c71850c1d8c3dd0
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>