This reverts commit da8bff6b20.
We revert this as we intent to move away from {u}int{8,16,32,64}_t types
to our own internal types for sized variables so we shouldn't need the
PRI macros anymore.
Change-Id: Ibb1fae7500bddb4772b8830d497a0e5f78b44bcc
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
To allow for various libc implementations (like newlib) in which the way
various {u}int{8,16,32}_t types are defined vary between both libc
implementations and across architectures we need to utilize the PRI
defines.
Change-Id: Ic4e65db52c8d693228cf80584283d4d06e68b5ad
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add soc_gpio_get(), soc_gpio_debounce_length_set() functions to Atmel
SAM soc_gpio driver.
Change-Id: I541c6fead9a308dd2e67c59dabe67b87cf1628ef
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Added serial (UART) driver for Atmel SAM MCU family.
Note:
- Error handling is not implemented
- The driver works only in polling mode, interrupt mode is
not implemented.
Tested on Atmel SMART SAM E70 Xplained board
Origin: Original
Jira: ZEP-1959
Change-Id: I3e770fd1feb2ddf92cf405a9aa17be92eb32e19b
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Added I2C bus (TWIHS) driver for Atmel SAM MCU family. Only
I2C Master Mode with 7 bit addressing is currently supported.
Tested on Atmel SMART SAM E70 Xplained board
Origin: Original
Jira: ZEP-1866
Change-Id: Ic5aa7b6b21295feccae883d580b38bbeaf2ce291
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Add plumbing to build system and SoC level dtsi for the NRF52832 SoC.
We additionally add the necessary yaml files for the UART on the NRF52
SoCs.
Change-Id: I3b4a821b2993827e33d8e84bdbbc759d1521f8bd
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Introduce SoC specific config options similar to what exists on NRF51,
this is mostly to help distinguish between SRAM & Flash sizes on
different variants.
Also deleted some unnecessary setting of CONFIG_SOC_NRF528{32,40} in the
board defconfig files.
Change-Id: I3aaedf0c15423ae12636f87b8e6a39070cbb2c6f
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Adds initial support for the kw40z SoC. This SoC has all the same
peripherals as the kw41z but with less flash and ram, so the defconfig
and dts are nearly the same.
Jira: ZEP-1388
Change-Id: Ib804451e8c2c71c4ff7d342bf23f6567d1542a2d
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The KL2x support requires DTS so we can remove any !HAS_DTS references.
Also NUM_IRQS shouldn't have been in a !HAS_DTS ifdef block.
Change-Id: I12b0781b6eef100bfb0a94698d12fc519c759888
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Since all STM32 SoCs are using device tree we can remove this last bit
of !HAS_DTS for getting flash/sram sizes from Kconfig.
Change-Id: I9e706b7aba7c0edcf9fca3ddc0ddc7d820980b47
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Converted over all STM32F3 based boards to use device tree and removed
associated bits that now come from the device tree for STM32F3.
Boards that are now using devicetree:
* Nucleo f334r8
* STM32373C Eval
Change-Id: I081a1d83f86e417a98b6864c745354b6b32953b7
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Converted over all STM32F1 based boards to use device tree and removed
associated bits that now come from the device tree for STM32F1. Also
renamed the STM32F10{3,7} SoC dtsi to try and make it clear that the 'X'
is a place holder. Fixedup the top level compatiables in the boards to
be the specific 'X' instead of the generic one.
Boards that are now using devicetree:
* Nucleo f103rb
* STM3210C Eval
* STM32 MINI A15
Change-Id: I29b3634ec7451f974687d55980414efa655e2e96
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Converted over all STM32F4 based boards to use device tree and removed
associated bits that now come from the device tree for STM32F4.
Boards that are now using devicetree:
* 96b_carbon
* nucleo f401re
* nucleo f411re
Change-Id: Ibe197ca0a3f5ad78d594485a578d986403cc824a
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Since all the L4 SoCs are using DTS we can remove the various Kconfig
bits that we now get from DTS.
Change-Id: Icdec49b478ff285dc3347b09412964a721f75bbf
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
In order to suppport the FRDM-KL25Z board,
it is necessary to make this soc available.
Change-Id: Id93a51dcc9ef58118e27db02c30f662eb73d5adb
Signed-off-by: Gustavo Denardin <gustavo.denardin@gmail.com>
I2C_SHARED_IRQ, I2C_0_IRQ_SHARED, I2C_0_IRQ_DIRECT Kconfig options
are DW driver specific. Its presence is confusing for a user of any
other I2C driver than DW. This patch renames these options to include
DW string and makes it visible only for DW I2C driver. This is a
similar implementation to that used by ETH DW Ethernet driver.
Change-Id: I795506f9b103c028a22317df9ad632dce5cd1343
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Instead of FLASH_LOAD_OFFSET being something specific to cortex-m, add
it generally to misc/Kconfig, along with a hidden config
HAS_LOAD_OFFSET which can be selected by the architectures as they add
support for the functionality.
Change-Id: I256ff8cf4e9b8493b26354c3b93fe1f7017d4887
Signed-off-by: David Brown <david.brown@linaro.org>
gcc only understands -mlongcalls form of this option, xcc understands
both. Use -mlongcalls for building with both xcc and gcc.
Change-Id: I93f65ccbc97429ae564f1986120b37ce205ee38c
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
The issue was that cpStack was changed to a memory buffer by commit
https://gerrit.zephyrproject.org/r/#/c/12816
However the assembly code was expecting it to be a pointer and thus
issuing an indirection, that leads to wrong addresses.
The fix removed this unnecessary indirection and thus the inherent
invalid memory access exception.
Issue: ZEP-1997
Change-Id: I843f049212f2d116a01b05367a284209f463a5e7
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
* CONFIG_SOC is now properly set and we do not need a separate
XTENSA_CORE build variable
* Some unnecessary macro -D CFLAGS in the Xtensa Makefile removed
* There is no default SOC selection, it is now done explicitly in
the board's defconfig
* CONFIG_<board name> now renamed to CONFIG_SOC_<board name in
uppercase> to conform to established style.
Issue: ZEP-1711
Change-Id: I88997530db09970b7fdd1c3e3d355bfca9d0be1a
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
_power_save_idle_exit() was removed long ago. All arches now just
call _sys_power_save_idle_exit() if PM is enabled.
Change-Id: I9cce3eecc8cbf1cbce15a355be420e747fb978de
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
When running with qemu often times the developer want to enable all
sorts of debugs which end up not working with only 192K.
Change-Id: I8d784618b9a0d911944f831a4058b34abc0c3e35
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
CONFIG_* usually come from Kconfig, rename variables that are locally
defined to avoid confusion about where they are set.
Change-Id: I402713e6f852907e75be4bc2b916a7d15dd5649c
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
CONFIG_* usually come from Kconfig, rename variables that are locally
defined to avoid confusion about where they are set.
Change-Id: I83b8459913c5deb68dc1b9f5386b8934363a6d1f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The CP context area was before on the bottom of the stack just
after the thread descriptor. Now it is moved inside the thread
descriptor to support some kind of memory protection.
Change-Id: Id3ebeaecfd9c2475899713fdc8da583a1f9121f9
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
I2C_CLOCK_SPEED Kconfig option is DW driver specific. It does not
define I2C interface speed but rather the I2C DW module clock speed.
It is confusing for a user of any other I2C driver than DW.
This patch renames this option to I2C_DW_CLOCK_SPEED and makes it
visible only for DW I2C driver.
Change-Id: I97f57332fd5cca644eabdef0968a0b2174b885ff
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
This is only built in if CONFIG_EXCEPTION_DEBUG is turned on.
Change-Id: I91f0601e344919f3481f7f5e78cb98c6784d1ec8
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
same70/soc.h provided IRQ ids as #define. This is no longer
necessary as gen_isr_tables mechanism, which was recently
introduced, supports IRQ ids as enums. These are provided
directly by Atmel ASF library.
Change-Id: I3c2573d97d81eb9a02e85fde0566622ff2ecf2cf
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
These are fixed I/O registers for getting and setting the states of
LEDs, buttons, SPI chip-selects, and LCD control lines. It also contains
several free-running counters with no specific use.
Change-Id: Ib49306d5501574f7eb354165cdca6f29e3d4dad4
Signed-off-by: Jon Medhurst <tixy@linaro.org>
For the SoCs in which all the boards for that platform are using dts we
can remove the Kconfig bits that are now coming from device tree.
Change-Id: Iccf4c84beb83fa1c516b6166f94de37b4a0162ae
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
As part of the transition to Device Tree, a temporary
HAS_DTS configuration variable, and a .fixup file per board
with symbol aliases were added.
This patch removes the cc32xx related fixup file
definitions, except for those used additionally outside
the cc32xx drivers.
Since cc32xx has DTS files, and since HAS_DTS will always be true,
it also removes the 'if !HAS_DTS' blocks from the cc32xx Kconfig
files.
Change-Id: I1c1b9f734795f523342f82ab32f2a38983812c0b
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Move back to getting the number of IRQs from Kconfig. We do this
because the number of IRQs should really just be determined by scanning
the device tree and figuring out the highest IRQ value used.
Change-Id: I8e0dbec1d9d036d4e899b237c4dc7d833c422e18
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
fibers/tasks are now just threads and we should not be using
struct *tcs any more.
Change-Id: Iee5369abcc66b4357a0c75537025fe8edb0ffbb4
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The SiFive Freedom E310 SOC follows the riscv privilege
architecture specification and hence is declared within
the riscv privilege SOC family.
It also provides support for a riscv
Platform Level Interrupt Controller (PLIC)
Change-Id: I19ff0997eacc248f48444fc96566a105c6c02663
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
This patch updates the ARM core to use struct k_thread instead of struct
tcs. Struct tcs has been deprecated with Zephyr 1.6.
Change-Id: I1219add0bbcca4b963ffe02cd4519eca355c7719
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
The Cortex-M4 of the STM32F4 family has an FPU. Enable the FPU support
by selecting CPU_HAS_FPU.
Change-Id: Iddae9c547df6e010562649eb0997dc61563c8fc4
Signed-off-by: Florian Vaussard <florian.vaussard@heig-vd.ch>
The comment refers to STM32F1 instead of STM32F4.
Change-Id: Ide116b712146f87a6f4d2aaafea8bd181c4d9397
Signed-off-by: Florian Vaussard <florian.vaussard@heig-vd.ch>
The current implementation of stm32_gpio_set() uses the GPIO output data
register to change the state of individual GPIOs. The generated
assembler needs at least 3 instructions: load / modify / store.
This opens a small race window, for example if a thread and an
interrupt both try to change the state of the same GPIO bank.
Use the GPIO bit set/reset register to perform the atomic change without
locking.
This also has the benefit of a more optimised implementation, which can
be useful for GPIO-intensive work. Compare the new version:
08000c98 <stm32_gpio_set>:
8000c98: f001 010f and.w r1, r1, #15
8000c9c: 2301 movs r3, #1
8000c9e: b902 cbnz r2, 8000ca2 <stm32_gpio_set+0xa>
8000ca0: 3110 adds r1, #16
8000ca2: 408b lsls r3, r1
8000ca4: 6183 str r3, [r0, #24]
8000ca6: 2000 movs r0, #0
8000ca8: 4770 bx lr
and the old one:
08000c98 <stm32_gpio_set>:
8000c98: 2301 movs r3, #1
8000c9a: f001 010f and.w r1, r1, #15
8000c9e: fa03 f101 lsl.w r1, r3, r1
8000ca2: 6943 ldr r3, [r0, #20]
8000ca4: b10a cbz r2, 8000caa <stm32_gpio_set+0x12>
8000ca6: 4319 orrs r1, r3
8000ca8: e001 b.n 8000cae <stm32_gpio_set+0x16>
8000caa: ea23 0101 bic.w r1, r3, r1
8000cae: 6141 str r1, [r0, #20]
8000cb0: 2000 movs r0, #0
8000cb2: 4770 bx lr
Change-Id: Ie5800d1c345016028d1b9a099f5d74cac35f592a
Signed-off-by: Florian Vaussard <florian.vaussard@heig-vd.ch>
In prep for supporting the older KL2x SoCs that use a different SPI
block, rename the current SPI driver to DSPI to match what the MCUX HAL
defines it as.
Change-Id: I9097580df5fca649ab6fd9a38212fced0b1ea6ed
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This patch adds the necessary changes to enable use of DTS for
generating required build information.
Change-Id: I0d7aa15488339a425ffe57b6354992851212f7f3
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
The previous file contained erroneous values of the number of IRQs
in these socs.
Change-Id: Ie7d2c19d86e247599f4924b95d9330175140d894
Signed-off-by: Gustavo Denardin <gustavo.denardin@gmail.com>
The current nordic hal layer in ext/ requires additional macros to
include the correct files. This will be corrected in an upcoming version
of the hal layer itself but for now add the required macros so that
users can benefit from the hal peripheral code.
Change-Id: I95127d0a98d7e882fdc779f961718fa223d504eb
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Updated the riscv-privilege SOC family to account for SOCs supporting
a Platform-level Interrupt Controller (PLIC) as specified by the
riscv privilege architecture.
riscv-privilege SOCs supporting a PLIC have to implement the following
list of APIs:
void riscv_plic_irq_enable(uint32_t irq);
void riscv_plic_irq_disable(uint32_t irq);
int riscv_plic_irq_is_enabled(uint32_t irq);
void riscv_plic_set_priority(uint32_t irq, uint32_t priority);
int riscv_plic_get_irq(void);
Change-Id: I0228574967348d572afc98a79257c697efc4309e
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
added the riscv-privilege SOC_FAMILY, under which all
riscv SOCs supporting the riscv privilege architecture
specifcation shall reside. These SOCs shall notably have
a common base for handling IRQs.
Moved riscv32-qemu under the riscv-privilege SOC_FAMILY
Change-Id: I5372cb38e3eaed78886f22b212ab4f881ef30b3f
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
This directory now handles all of Cortex-M0, Cortex-M3/M4. So, just
consistently use "Cortex-M" (as used by number of files already)
without refering to a particular subarch. Also, consistently (letter
casing) spell it as "Cortex-M". A typo is fixed too.
Change-Id: I42ee09abc9a503381bca4ae437c83a8f48816ebc
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
