In mqtt_keepalive_time_left(), return -1 if keep alive messages are
disabled by setting CONFIG_MQTT_KEEPALIVE=0.
This allows to use mqtt_keepalive_time_left() directly as an input
for poll(). If no keep-alive is expected, -1 would indicate
that poll() can block until new data is available on the socket.
Signed-off-by: Simen S. Røstad <simen.rostad@nordicsemi.no>
The commit adds information, to release notes, on mcumgr now supporting
flash devices that have non-0xff erase value.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Mark all k_mem_pool APIs deprecated for future code. Remaining
internal usage now uses equivalent "z_mem_pool" symbols instead.
Fixes#24358
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This change adds full shared floating point support for the SPARC
architecture.
All SPARC floating point registers are scratch registers with respect
to function call boundaries. That means we only have to save floating
point registers when switching threads in ISR. The registers are
stored to the corresponding thread stack.
FPU is disabled when calling ISR. Any attempt to use FPU in ISR
will generate the fp_disabled trap which causes Zephyr fatal error.
- This commit adds no new thread state.
- All FPU contest save/restore is synchronous and lazy FPU context
switch is not implemented.
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
The debugging section was generalized for flash and debugging tools.
The links were refactored accordly and all references were updated.
To be consistent, the directory doc/guides/debbugging was renamed to
doc/guides/flash_debug.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Provide a helper to extract the devicetree node_id for a GPIO
controller from a gpio phandle array. This can be used with
DEVICE_DT_GET() to directly reference the corresponding controller
device.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Windows does not default to an empty string when an env var is not
declared, like Linux does. Instead, explicitly default to one in order
for the .strip() call to work properly.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Updated the documantation with newly added configuration features.
Added information where to find minimal shell config file.
Added information how to activate particular features.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
The user documentation specifies that a list of objects passed to
k_thread_access_grant() should be terminated by NULL. The API itself
specifies that NULL should not be passed. Fix the user documentation.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
currently pcie_get_mbar only returns the physical address.
This changes the function to return the size of the mbar and
the flags (IO Bar vs MEM BAR).
Signed-off-by: Maximilian Bachmann <m.bachmann@acontis.com>
Clarify that while any number of kernel objects can be created, there is
a limit which is set by the available RAM.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
* Add RCP library.
* Conditionally remove non required libraries not required for RCP.
* Drop :option: marker for CONFIG_OPENTHREAD_NCP_SPINEL_ON_UART_ACM
Signed-off-by: Markus Becker <markus.becker@tridonic.com>
Add support for abs with additional integer types.
This is needed to make LLVM quiet and stop warning about abs being used
with int64_t and such.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add new function to mem_slab API that enables user
to get maximum number of slabs used so far.
Signed-off-by: Kamil Lazowski <Kamil.Lazowski@nordicsemi.no>
The introduction page lists all the architectures supported by Zephyr.
Now that SPARC V8 support has been merged, add it to the list. Also list
it in the set of architectures supported by the SDK.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Fix documentation build issue where generating the kconfig rST was
failing due to missing Kconfig.shield* files. Add an extra step in
CMakeLists.txt to properly generate them, similarly to what is already
done for Kconfig.soc*.
Signed-off-by: Fabio Utzig <fabio.utzig@nordicsemi.no>
This commit adds a C99 stdio value formatter capability where
generated text is emitted through a callback. This allows generation
of arbitrarily long output without a buffer, functionality that is
core to printk, logging, and other system and application needs.
The formatter supports most C99 specifications, excluding:
* %Lf long double conversion
* wide character output
Kconfig options allow disabling features like floating-point
conversion if they are not necessary. By default most conversions are
enabled.
The original z_vprintk() implementation is adapted to meet the
interface requirements of cbvprintf, and made available as an opt-in
feature for space-constrained applications that do not need full
formatting support.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Added note about change in the option for advertising directed
towards a privacy enabled peer.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Previously, ring buffer had capacity of provided buffer size - 1. This
trick was used to distinguish between empty and full states. It had one
drawback: ring buffer could not be used as a pool of equal sized buffers
(using ring_buf_put_claim and ring_buf_get_claim).
Reworked internals to use non wrapping head and tail. Since they are
non wrapping, there is no issue with distinguishing between empty and
full. Since this appraoch would be vulnerable to wrapping on 32 bit
boundary, added a mechanism which periodically reduces all indexes to
avoid 32 bit wrapping.
After this rework, buffer has one byte more capacity. Simple test shows
slight performance improvement.
Updated tests to reflect increased capacity and added test to check if
it is possible to continuesly allocated 2 buffers of half ring buffer
size.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This is documented similarly to how other command
handlers are documented. This documents that shell
management is supported, but relies on the example
project for implementation details.
Signed-off-by: Brian Bradley <brian.bradley.p@gmail.com>
deprecate DEVICE_INIT in favor of just using DEVICE_DEFINE directly.
The small handful of DEVICE_INIT users was easily converted to use
DEVICE_DEFINE or SYS_DEVICE_DEFINE.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We deprecate nRF5340 PDK and add a note that
the board will be replaced by nRF5340 DK.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Moves mesh feature configuration to a separate module, deprecating the
bt_mesh_cfg_srv structure. The initial values for the features should
now be enabled through KConfig, where new config entries have been added
for each feature.
This removes the upward dependency on the config server from the core
stack, and makes the config server a pure frontend for the configuration
states, as all spec mandated behavior around the feature states is now
encapsulated.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Adds public documentation for the Heartbeat feature in a separate page
under Bluetooth Mesh.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Add information how to run two QEMUs and have IEEE 802.15.4 link
layer over UART between them. This is useful if one needs to test
basic IEEE 802.15.4 functionality without a IEEE 802.15.4 radio.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add generated documentation content for known devicetree bindings
using the Binding abstraction which was just added to edtlib. This
works similarly to the way Kconfig content is generated, so extract a
bit of common helper code for doing that out and rename the relevant
files to keep the distinction clear.
Make the documentation build system respect a preset DTS_ROOT. In this
way, out of tree bindings can be added to the generated content by
telling the documentation build system where to find them, identically
to how out of tree bindings can be added to a Zephyr application.
Similarly, make the output directory configurable.
Fixes: #28865
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Rework some section titles and separate the API into its own sub-page
in the reference section.
This is prep work for adding generated reference material on
devicetree bindings.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Minor fix for showing latest version in sidebar, no need for link here
that was added in recent commit.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Mention the newly introduced funtionality for Cortex-M
architecture to force the early-boot initialization of
internal architecture HW state.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This makes it easier to scan. The sorting is done based on the text
that appears in the HTML, not the :ref: label name.
In the case of the DMIC API, change the title of the document to match
the "Audio Codec" document so we can keep those together.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Breathe>=4.23.0 brings in basic xrefitem rendering support and fixes
issues parsing anonymous struct/unions. This version also adds a config
knob for showing or hiding enumerator values, so set it to generate
documentation compatible with previous versions.
Signed-off-by: Fabio Utzig <fabio.utzig@nordicsemi.no>
Divided doxygen API documentation into zephyr-internal API and
user API.
This make sense as user shall not use zephyr-internal API.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Added information about that offsets are expressed in relation to
the flash memory beginning address.
This info was missing which cause misunderstanding of the concept
while contributing.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Add description how to enable zero-latency interrupt in the application
code. Previous docs described only the Kconfig and not the flag.
Signed-off-by: Martin Jäger <martin@libre.solar>
Some information on design goals can be updated:
- we have decided against code generation for the time being
- we can do pin muxing via devicetree (this requires soc.dtsi
support, but the necessary devicetree infrastructure exists)
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The current policy of always excluding stacks that aren't
owned by the current thread only works well on MPU systems,
where it is very fast to have a reserved MPU region corresponding
to the stack buffer of the current thread.
This unfortunately is not efficient on MMU-based systems, it
would require either a different set of page tables per thread
or an expensive page table update on context switch.
This PR relaxes the documented policy to leave it up to the
implementation whether threads that all belong to the same
memory domain can see each other's stacks.
There's lots of precedent for this, for example on Linux threads
in the same process can all access each other's stacks.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Rather than doing a doc build on every PR, limit it to PRs that either
touch a file in doc/, *.rst and what's listed as DOXY_SOURCES in
doc/CMakeLists.txt.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Deprecate the Musca-A board and SoC support to be removed in 2.6.0.
There are a number of issues with the Musca-A and there exists both the
Musca-B and Musca-S1.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Exclude (other) build directories with a CMakeCache.txt file as they
typically contain previous output from ourselves.
One key feature of 'out of source" builds offered by CMake is allowing
multiple build directories. For instance to build different
configurations without starting from scratch. Unfortunately, the
extract_content.py code had a severe issue with multiple build
directories with an interesting effect on build times, see simple
reproduction below:
cd doc/
cmake -B _build/
cmake -B _b2
# Repeat these a couple times
make -C _build content
make -C _b2 content
find -name rst
./_b2/rst
./_b2/rst/doc/_build/rst
./_b2/rst/doc/_build/rst/doc/_b2/rst
./_b2/rst/doc/_build/rst/doc/_b2/rst/doc/_build/rst
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Fixes commit 15fbf707ca ("doc: revert to copy files with
extract_content.py directly") that removed (2 years ago!) the definition
of EXTRACT_CONTENT_OUTPUTS while leaving it in use by sphinx-html and
sphinx-latex.
On my Linux box "make sphinx-html" is more than 5 times faster than
"htmldocs", likely because it does not build doxygen nor kconfig.
Also add missing WORKING_DIRECTORY for consistency with regular
targets and to fix this error:
Exception occurred:
File "~/.local/lib/python3.8/site-packages/sphinx/
search/__init__.py", line 284, in __init__
with open(scoring, 'rb') as fp:
FileNotFoundError: [Errno 2] No such file or directory: 'scorer.js'
I don't know when that second regression appeared.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Instead of having a .99 version, use latest and link to the lates
documentation on the left side bar.
The version number has been confusing users where it was difficult to
determine if they were looking at the development tree or some released
version.
Fixes#24453
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We rework the titles and headers of the section where we
describe the process for submitting new module and changes
to existing modules. Move the 'requirements' section at the
top of the page.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We move the section about how to build Zephyr and integrate
with modules into its own section with title
'Integrate modules in Zephyr build system'.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
In the module documentation page, add a section to describe
the requirements and the allowed practices for synchronizing
the module code base with the upstream project.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
In the module documentation page, add sections for
Testing and Documentation requirements. Add also a
section decribing polices for module deprecation and
removal.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Adding content to describe policies and requirements
around licensing in Zephyr modules.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add a section that summarizes the recommended
contribution workflow in zephyr modules.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Submit a paragraph that summarizes the different
individual roles in Zephyr module repositories.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Capture the discussion regarding which external projects
should be considered as candidates for zephyr modules.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Rename the devicetree/adc.h header file to devicetree/io-channels.h to
reflect that io-channels are used for both ADC and DAC devicetree
phandles.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Mention in the board porting guidelines the recommendation
to enable by default the HW Stack Protection feature, and
the rationale behind it.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Hide these away in the reference documentation for now. It seems
rather unlikely that they'll be used by anything other than internal
infrastructure to get started with.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add the first API functions that directly deal with node dependency
ordinals as determined by edtlib:
- DT_DEP_ORD(node_id): node_id's ordinal
- DT_REQUIRES_DEP_ORDS(node_id): list of dep ordinals for node_id's
direct dependencies
- DT_SUPPORTS_DEP_ORDS(node_id): list of dep ordinals for nodes
depending directly on node_id
- DT_INST_ equivalents
This is not meant to be an exhaustive set of macros related to
dependency ordinals; rather, it's a starting out point meant to enable
initial struct device dependency tracking work. We can add more if
needed.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
It's great to have full manifest examples that can actually work as they
are, however the number of lines can "dilute" the feature currently
described and distract from it. Add some comments in the manifests to
highlight the current topic(s).
The file tree examples and their descriptions are carefully made up and
generally excellent, however I found my eyes going constantly back and
forth between the two in order to match them with one another and build
the actual, graphical representation in my head. These new comments
attached to the major elements of the trees will IMHO accelerate that
visual representation. What I found especially lacking: clues about
which directories are .git/ clones; a pity in the pages specifically
about git clone organization.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
The legacy macros were first deprecated in Zephyr v2.3. Now that
Zephyr v2.4 has been released, that makes two releases where these
macros have been deprecated, so it's OK to remove them.
This leaves support for legacy binding syntax in place. Removing that
is left to future work.
We need to update various pieces of documentation related to flash
partitions that never got updated when the new API was introduced.
Consolidate this information in the flash_map.h API reference page,
since that's really where users will run into it. This also gives us
the opportunity to improve this documentation.
Adjust a couple of kconfigfunctions.py and sanitycheck bits to use
non-legacy edtlib APIs.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
It should be possible to submit quick documentation fixes without
depending on a complete west workspace. Fixes the following crash:
Exception occurred:
File "west/src/west/util.py", line 82, in west_topdir
raise WestNotFound('Could not find a West workspace '
west.util.WestNotFound: Could not find a West workspace in this
or any parent directory
Fixes ae8dd14887 ("doc: ext: link-roles: allow non-default baseurl")
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
* Add comments about the default settings
* Change proximity-trigger default to match POR of 'disabled'
* Added reference to datasheet
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The delayed work API has been changed to allow cancellation in
conditions not previously documented, but this feature can cause both
submission and cancellation to fail in the general case. Summarize
the conditions and highlight the importance of checking result codes
for these functions.
Also explicitly note that no kernel API can reliably indicate that a
work item has been completed, and that doing so is the responsibility
of the code that provides the work handler.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Fix broken links generated by link-roles after west was upgrade to
0.8.0. `url` was previously `None` and now returns an empty str.
Signed-off-by: Fabio Utzig <fabio.utzig@nordicsemi.no>
This adds a Kconfig option for enabling post-mortem mode of SystemView.
This is useful for crashes that occur after a longer period of time.
Signed-off-by: Mattia Fiumara <mattia.fiumara@bgrid.com>
This is a new DT macro which was added in
c3eef7744a ("include/devicetree.h: Add
DT_ENUM_IDX_OR macro")
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Application protocol APIs are unrelated to each other and change
separately, so it makes sense to have separate entries for each of them.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Currently, after `CONFIG_LWM2M_RD_CLIENT_SUPPORT_BOOTSTRAP` is enabled,
the LwM2M engine will initiate bootstrap procedure on each run. This
approach limits the flexibility of the application, as it's not always
necessary to go over the bootstrap procedure (for instance, the
application may decide to store the security object obtained during the
bootstrap in flash, and restore it on boot).
Fix this by introducing an additional `flags` parameter to the
`lwm2m_rd_client_start()` function, which provides information whether
to run bootstrap in the current session or not.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Use italics more consistently when referring to parameters by name.
Make the ImportFlag members appear.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Remove code and associated tests and Kconfig related to
SETTINGS_USE_BASE64 that was deprecated in Zephyr 2.2
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add information about the network management events when user
wants to listen multiple events from different layers.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
There are two shell sections on documentation. Move last section to
right place to fix documentation style.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Add some missing information regarding some nRF
SoC and Boards that were added in the current release.
Make a note that HW Stack protection is now enabled
by default in Nordic-maintained nRF Boards.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Per TSC we will document deprecation for 2.4 but not add
__deprecated tags until the 2.5 merge window opens.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Link roles, aka :zephyr_file: and :zephyr_raw: use a repo's git describe
information to create links but the baseurl is fixed to the upstream
repo. This breaks links created in repos that are forks located
somewhere else.
This commits tries to get the baseurl from west if available so it will
work correctly for forks. If fallbacks to the upstream repo if no
information can be gathered by West, or West is not available.
Signed-off-by: Fabio Utzig <fabio.utzig@nordicsemi.no>
How to manage repositories that require authentication to fetch from
using west is a frequently asked question.
TL;DR on the answer is that Git already has credential storage built
in, so our expectation is that there is nothing west needs to do in
particular, as users can select whatever credential helper works for
them, or set up a custom one using something like the GIT_ASKPASS
environment variable.
That's not a very helpful expectation if people aren't aware that
credential helpers exist, though, so let's document that and provide
examples for common use cases, as well as west-specific
troubleshooting advice.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
How-to guide has 0.11.3 SDK
Replace with the latest one SDK 0.11.4 in the documentation
description and links.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Add release notes covering the various ARM DesignStart FPGA related
additions in Zephyr v2.4.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
- use sizeof(struct data_item_type) instead of sizeof(data_item_type)
- use struct data_item_type instead of invalid reference data_item_t
- add aligned typedef struct data_item_type example implemenation
- add note about checking return value for error message
Fixes#19684
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
Currently the socket API is not thread safe so mention this in
socket API documentation. The plan is to add locks in 2.5 release.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is a really useful CMake variable that can be used to preserve
the default CONF_FILE value, but "mix in" additional content.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This new ALIAS can be used to add references to Kconfig options. To use
it enclose the Kconfig symbol name like this `@option{KCONFIG_FOO}`.
Signed-off-by: Fabio Utzig <fabio.utzig@nordicsemi.no>
Enable Breathe SEPARATE_MEMBER_PAGES compatibilty; this option allows
resolution of a huge amount of references that are currently broken
(around 650 based on my grep foo!) due to issues in the Doxygen XML
generation when this option is enabled.
Signed-off-by: Fabio Utzig <fabio.utzig@nordicsemi.no>
Added note about fixed/changed behavior when too many arguments are
provided.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Fixes: #23825
Today, BOARD, SOC, ARCH, DTS, KCONFIG, and TOOLCHAIN_ROOT can be
specified by users or through other CMake files.
It is not clear if relative paths are permitted and/or from where a
relative path is constructed.
Inside CMake, it is very easy to specify `${ZEPHYR_BASE}`,
`${CMAKE_CURRENT_SOURCE_DIR}`, or similar, thus there is no reason to
use relative path inside CMake, as it easy can lead to discussion on
relative to what.
For users manually invoking CMake using, `cmake ... <app-dir>` it is
nice to have to possibility to specify a relative path.
For this purpose, relative path are considered relative to the
`APPLICATION_SOURCE_DIR`.
This commit updates:
- BOARD_ROOT
- SOC_ROOT
- ARCH_ROOT
- DTS_ROOT
- KCONFIG_ROOT
- TOOLCHAIN_ROOT
to allow paths relative to `APPLICATION_SOURCE_DIR` when specified with
`-D<type>_ROOT=<relative-path>`
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Document that some initialization orders that used to work (and
shouldn't have) will no longer work.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Initial draft of release notes for AARCH64 (Cortex-A)
for the Zephyr v2.4.0 release.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Initial draft for Release notes for ARM (Cortex-M)
for the Zephyr v2.4.0 release.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This code had one purpose only, feed timing information into a test and
was not used by anything else. The custom trace points unfortunatly were
not accurate and this test was delivering informatin that conflicted
with other tests we have due to placement of such trace points in the
architecture and kernel code.
For such measurements we are planning to use the tracing functionality
in a special mode that would be used for metrics without polluting the
architecture and kernel code with additional tracing and timing code.
Furthermore, much of the assembly code used had issues.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Make it actually give the original pointer to the attribute and its
resolved handle so static attributes don't need an extra lookup.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Fixes: #27934
This commit introduces additional naming support of config files.
It is now possible to create a config file of the form
`prj_<build>.conf` and automatically have a corresponding
`boards/<BOARD>_<build>.conf` config file merged.
As example, one can create a structure as:
|-- prj.conf
|-- prj_debug.conf
|-- boards
|-- nrf52840dk_nrf52840.conf
|-- nrf52840dk_nrf52840_debug.conf
when building: (existing behavior)
cmake -DBOARD=nrf52840dk_nrf52840 ...
prj.conf is merged with nrf52840dk_nrf52840.conf
when building: (new behavior)
cmake -DBOARD=nrf52840dk_nrf52840 -DCONF_FILE=prj_debug.conf ...
prj_debug.conf is merged with nrf52840dk_nrf52840_debug.conf
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Identify the special case of /zephyr,user as a node for which property
values are generated without having to define a binding.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This commit extends USB hid API callbacks by adding
'const struct device *dev' parameter. If the application
configured more than one HID device then it must specify
separate hid_ops for each device as its unable to determine
for which device the callback was called.
This patch makes it possible to have only one hid_ops within
the application and the application is aware for which device
the callback was called because of explicit device pointer.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Those APIs are used for deleting appkey, unbinding an application
from SIG model, unbinding an application from vendor model on the
target node, with matching shell command.
Signed-off-by: YanBiao Hao <haoyanbiao@126.com>
The Health models' shell documentation was mistakenly labeled Heartbeat
Client and Heartbeat Server, and the Heartbeat configuration commands
were mistakenly categorized under these sections.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
The documentation claims that Zephyr supports external file system
implementations, and there's no reason not to do so. Rework the API
to allow this.
Note that the file system type cannot legally be an enum anymore,
since we need to support file system types that don't have an
identifier assigned in that enum. Rely on the implicit conversion of
enum values to int to preserve backwards compatibility.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
In some cases it is useful to use the C preprocessor to control the
content of a devicetree file. A specific use case is in testing,
where different combinations of node properties must be checked.
Provide a mechanism to allow arbitrary preprocessor flags to be passed
through CMake to affect the devicetree content.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Adds a Config Client API for deleting netkeys on the target node, with
matching shell command.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Some macros were using :c:func: and :cpp:func: which forbids Breathe
from resolving those symbols. Update to :c:macro: for proper resolution.
Signed-off-by: Fabio Utzig <fabio.utzig@nordicsemi.no>
Following the change to use the C domain for parsing, update all
existing :cpp:enumerator: references to :c:enumerator:.
Signed-off-by: Fabio Utzig <fabio.utzig@nordicsemi.no>
`NULL` is not defined in the Zephyr sources, but rather a C definition
which is not resolved when building the documentation and generates a
warning. Fall back to using just emphasis.
Signed-off-by: Fabio Utzig <fabio.utzig@nordicsemi.no>
Fix some C macros that are currently just emphasized in the
documentation with proper symbol resulition using :c:macro:
Signed-off-by: Fabio Utzig <fabio.utzig@nordicsemi.no>
Sphinx>=3.0 includes the `struct` role in the C domain, which provides a
specific way to link to structs, while the old :c:type: role should be
primary used to typedefs. Update existing references, using :c:type:,
:cpp:type: or emphasized symbols that point to structs to use the new
role.
Signed-off-by: Fabio Utzig <fabio.utzig@nordicsemi.no>
Following the change to use the C domain for parsing, update all
existing :cpp:func: references to :c:func:. Remove the parentheses as
well, if used, because they are not needed, this is already known to be
a function, and how it is displayed in the documentation later is a
semantic decision done by the output builder.
Signed-off-by: Fabio Utzig <fabio.utzig@nordicsemi.no>
Add __subsystem to list of attributes for the parser, and make the c
parser accept the same attributes than the cpp parser, after the change
to use the c parser for ".c" files.
Signed-off-by: Fabio Utzig <fabio.utzig@nordicsemi.no>
Older Breathe versions didn't work correctly with the C domain, so there
was a mismatch when refering to functions and #defines, using :cpp: or
:c: depending on the origin of the refered symbol. With Breathe >=4.19
the C domain works correctly so all symbols can be refered to with the
:c: role.
Signed-off-by: Fabio Utzig <fabio.utzig@nordicsemi.no>
Update methods used to include JS/CSS files, avoiding deprecated
versions the don't work on Sphinx>=3.x. The new methods work on both
Sphinx==3.x and Sphinx>=2.4.x.
Signed-off-by: Fabio Utzig <fabio.utzig@nordicsemi.no>
This commit describes add a section which describes how Zephyr modules
are integrated into Zephyr build system and what Zephyr module variables
that are available during CMake and Kconfig processing.
Those variables may be used for refering other Zephyr modules or
including of additional code.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The spi_flash_w25qxxdv driver has been superseded by the generic
spi_nor driver for over a year. The only non-refactoring change to
the W25Q driver in the last 18 months was done to support a backport
to 1.14.
All devices supported by spi_flash_w25qxxdv driver are expected to be
supported by the spi_nor driver, using the standard `jedec,spi-nor`
devicetree compatible. No in-tree devicetree files make use of this
driver.
Remove the confusion about which driver to select by removing the
unmaintained redundant driver.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Depending on how people set up their Python, west might not be on
PATH.
I'd like to have a special-purpose step by step guide for how to
handle this in the documentation to save support time when this
happens. I think it's worth special casing since west is the first
runnable program that pip installs onto a new user's system when
they're following the GSG.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add a new listing for the Zephyr BLE Controller. This applies to
the Nordic nRF52 series and Zephyr version 2.2.x.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
In 'struct coap_resource' path description:
- the plus symbol represents a single-level wild card in the path;
- the hash symbol represents the multi-level wild card in the path.
This change keeps compatibility with RFC 7252 but allows handling
multiple requests in single function.
Signed-off-by: Eug Krashtan <eug.krashtan@gmail.com>
The EEPROM API, which was introduced in Zephyr v2.1.0 and has not seen
any changes since, has multiple implementations supporting a wide
variety of EEPROM backends (SPI, I2C, on-chip, simulator).
Bump the EEPROM API from "experimental" to "unstable" according to the
Zephyr API lifecycle process.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Various API involves functions and data that are conditionally
enabled. Zephyr practice is to exclude data (always) and function
(sometimes) declarations at build time using the enabling preprocessor
macro. This meets functional needs, but blocks generation of the API
documentation as Doxygen will not see the declarations.
Document the need to extend Doxygen's PREDEFINED setting to generate
the documentation.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Provide a location for recommended practices that are not related to
coding style. Initialize it with information about the expected
design for callbacks.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Gaps in Kconfig flexibility make it necessary to provide
instance-specific driver configuration through devicetree properties
in certain cases. Because these are not hardware characteristics or
configuration they should be marked as zephyr-specific.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The Kconfig options that formerly controlled this capability have been
removed so rework the "exception" (there is no "precedence" anymore).
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Zephyr release 2.1 changed the default settings back end from FCB to
NVS in all Bluetooth samples for performance and reliability reasons.
Update the settings documentation to provide a clue to developers
trying to decide which to use.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
This adds a very primitive coredump mechanism under subsys/debug
where during fatal error, register and memory content can be
dumped to coredump backend. One such backend utilizing log
module for output is included. Once the coredump log is converted
to a binary file, it can be used with the ELF output file as
inputs to an overly simplified implementation of a GDB server.
This GDB server can be attached via the target remote command of
GDB and will be serving register and memory content. This allows
using GDB to examine stack and memory where the fatal error
occurred.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Fix the directory layout examples to use "<board>" when referring to a
board name, and "boards" when referring to the boards directory.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Fixes: #27375
This is a cleanup of the Zephyr CMake package export.
The code has been simplified so that the export now happens through a
CMake script. This avoids several generated CMake build files compared
to previous export mode, and thus removes the need for a CMake pristine
script.
A benefit of this cleanup is that it also fixes#27375.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Using ZEPHYR_BOARD_FLASH_RUNNER relies on a cache variable that
happens to work but is not a supported feature. The appropriate
variable to set is simply BOARD_FLASH_RUNNER.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This is covered in the porting guide, and we have complete docstrings
for these macros, but having discussion here helps new users understand
how to use these and why they exist.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Some flash drivers are capable of issuing a JESD216 READ_SFDP command
to read serial flash discoverable parameters. Allow applications and
utilities access to that capability where it's supported.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
The on-off manager infrastructure is designed to robust asynchronous
transition between binary states where multiple clients may be
initiating a transition from any context. The actual transition is
performed using a manager that tracks the current state and pending
operations. Requests are initiated by passing a reference to an
onoff_client object that holds client state including the notification
mechanism.
This API may be used in subsystems where the transitions for a
particular driver are always synchronous and isr-ok, e.g. setting a
SoC-controlled GPIO. In this situation the full on-off manager
infrastructure is wasteful. All we need is a record of the service
state: off, active count, or error.
Add a data structure and an API that can be used to replace the onoff
manager functionality in a situation where all transitions are isr-ok
and synchronous while retaining compatible behavior from the client
perspective.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
There is nothing wrong with instance numbers and they are
recommended for use whenever possible, but this is an API
design problem because it's not always possible to get nodes
by instance number; in some cases, drivers need to get node
identifiers from node labels, for example.
Change these APIs (which are not yet in any Zephyr release)
to take node IDs instead of instance IDs.
Fixes: #26984
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
In Github issue #27548 I found out that documentation has
incorectness. I made fix and described how correctly provide multiple
overlay files for west and cmake. For both of them necessary to use
quotations. After that, necessary to make one more change if you have
multiple files in quotations. For west necessary to separate multiple
files using spaces and for cmake to separate multiple files necessary
to use semicolons.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Add a entry to 2.4 release notes about a need to explicitly
call usb_enable() for applications that configures specific
features.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
This device isn't an actual hardware driver: it's a virtual EEPROM
that stores data in an instance-specific RAM buffer, with the data
exposed on an I2C bus as a I2C follower (slave) device that can be
controlled by another device acting as a leader (master) on that same
bus.
As such it's a reasonable example of how to write an I2C follower
driver, but it's not clear that it has a real use in applications. A
Zephyr application that needs to emulate an EEPROM in a real-world
system would be unlikely to provide its data from a RAM buffer.
The sole in-tree reference is in the i2c_slave_api test, so move the
driver implementation into that test.
The Kconfig and hierarchy are being left in place until it is more
clear how this functionality should be selectable within Zephyr. The
I2C_SLAVE symbol has been converted from menuconfig to config to
eliminate a Kconfig style diagnostic.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This commit updates the release notes with the changes introduced
in #26715.
It also informs readers that existing use of `$(SOC_DIR)` in Kconfig
must be updated, for example to use `rsource` instead of
`source $(SOC_DIR)` in order to adopt to latest changes.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit updates the description of SOC_ROOT according to the new
multiple SOC_ROOT enhancement.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The change to use devicetree instead of the config option will break
anybody who has a devicetree that doesn't include the proper active
level for cs-gpios (which is not zero).
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Add a document how to get and interpret information about
network TX / RX packet processing statistics.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Document change in how L2CAP RX MTU is set through Kconfig options.
Document recommended new value for applications that have set
CONFIG_BT_RX_BUF_LEN.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This commit adds description of the build setting support in the
module.yml file.
It is described how additional board_root, soc_root, dts_root, and
arch_root can be appended to the build system.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit restructures the Zephyr module description.
It places the description of the module yaml file in a dedicated section
as this file is common to module inclusion both when using `west` and
without `west`.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit introduces support for multiple SOC_ROOT.
This means that additional SOC_ROOTs specified using -DSOC_ROOT as
argument to CMake will be forming a list together with ${ZEPHYR_BASE}.
This allows for greater flexibility, as developers can now specify
multiple out-of-tree SoCs and not worry about the SoC used for the
board they compile for.
Also it avoid code, such as:
if(BOARD STREQUAL my_board_using_out_of_tree_soc)
set(SOC_ROOT some/out/of/tree/soc/path)
endif()
in application CMakeLists.txt.
Finally, allowing multiple SOC_ROOTs prepares for specifying SOC_ROOTs
in Zephyr modules.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This set of functions seem to be there just because of historical
reasons, stemming from Kbuild. They are non-obvious and prone to errors,
so remove them in favor of the `_ifdef()` ones with an explicit
`CONFIG_` condition.
Script used:
git grep -l _if_kconfig | xargs sed -E -i
"s/_if_kconfig\(\s*(\w*)/_ifdef(CONFIG_\U\1\E \1/g"
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Update release notes API change section with information on change to
fs_open parameter list.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Make sure that only those threads that have been granted access
to net_if objects, can call the functions that modify net_if data.
The CONFIG_NET_IF_USERSPACE_ACCESS config option is also removed
as it is no longer needed after this change.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add details of the LVGL7 update (e.g. warn about higher ROM usage,
changed Kconfig defaults, ...)
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Updates the contribution guidelines to document the current board policy
of rejecting non-OSI-approved licenses.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This PR fixes the links to the example files in the Gitlab repository.
Fixes Dir 4.8 and Rule 2.1, 5.1, 5.8, 5.9, 8.5, 8.6, 13.1, and 13.5.
Signed-off-by: Lauren Murphy <lauren.murphy@intel.com>
The mempool implementation doesn't require specific sizes and can
support arbitrary sizes up to the limit of available memory. The
Kconfig documentation on this configuration was confusing user.
Fixes#20418
Signed-off-by: David Leach <david.leach@nxp.com>
The CI style checking solution can produce false positives when it's
given code that it mis-parses, or that follows conventions it doesn't
allow. Document a couple examples, and explicitly note that
maintainers should override the -1 vote if they're encountered.
For those following along in the commit history:
static uint8_t __aligned(PAGE_SIZE) page_pool[PAGE_SIZE * POOL_PAGES];
checkpatch sees "uint8_t __aligned(PAGE_SIZE)" and infers a prototype
for a function "__aligned" that takes an unnamed parameter of type
"PAGE_SIZE". So it adds "PAGE_SIZE" as a known type name.
IOPCTL_Type *base = config->base;
This is common in driver code where the vendor HAL allows typedefs for
structure types. checkpatch was designed for an environment with
limited use of typedefs; "struct IPCTL_Type" would have been handled
properly.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Sort the MISRA lists in a more natural ascending numeric order.
So instead of 1.1 - 1.10 - 1.11 - 1.2 - 1.3, we now have
1.1 - 1.2 - 1.3 - 1.10 - 1.11.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Rule 18.6 has the examples split in two files. This PR adds
the correct reference to the example files in the gitlab
repository
Signed-off-by: Andries Kruithof <Andries.Kruithof@nordicsemi.no>
Support running/building only specific tags and ignoring everything
else.
Adding this to a platform yaml file will enable tests with one of of
tags listed to be executed on the platform.
This is useful for special platform configurations used for testing
specific features for example.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Adds a high-level documentation page for the Bluetooth Mesh Shell
subsystem, documenting all available commands and their parameters.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Add a note in 2.4 release notes regarding SW_VECTOR_RELAY
feature, now supported also in Mainline Cortex-M architecture.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add a small section that describes the existance of the coding
guidelines page and links to it, in order to raise awareness of the
effort towards complying with those.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Link to the coding guidelines from the main contribution guidelines
page, so that users are aware of the guidelines.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Aside from the MISRA-C derived Coding Guidelines, add a list for
additional ones that are not a subset of a standard.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Fixing issues with recent versions of breathe 4.19.2:
WARNING: Unparseable C cross-reference: 'struct device'
Invalid C declaration: Expected identifier in nested name, got keyword:
struct [error at 6]
struct device
------^
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Added a link to IEEE GET program web page to suggest
an option of downloading the specification to the users.
Signed-off-by: Uma Praseeda <uma.praseeda@nordicsemi.no>
The generic SPI GPIO chip select support now respects devicetree flags
for signal active level. Update all cs-gpios properties to specify
active low.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Allow feed operations that would stall due to internal peripheral
delays to complete immediately with -EAGAIN indicating that the feed
did not occur as expected.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Add the coding guidelines agreed upon by the project TSC with a
description of the staged approach needed to implement them
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We deprecated a number of aspects of the DTS binding syntax in Zephyr
2.1. Remove the support for the deprecated syntax. Remove from docs
about the deprecated syntax as well.
Removed reference in release-notes-2.1.rst to legacy_binding_syntax
since that anchor doesn't exist anymore.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Security documentation contains a code guideline section that is more
about security principles than code guidelines itself. Just removing
the mention do code guideline to avoid possible confusions with
upcoming project code guideline based on MISRA-C.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Add release notes for updated HCI driver event handling for calling the
bt_recv() and bt_recv_prio() functions when delivering HCI events to
the host.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add a link to the page describing our development
processes, as it contains the description of how
to identify issues and pull requests as stale.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add a small section, clarifying the policies around modifying
contributions submitted by other developers.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add a small paragraph in the Contribution Guidelines
documentation to stress that cherry-picking of patches
into other pull requests is an allowed practive. Add a
link to additional documentation clarifying policies
around modifying patches of other developers.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
I received feedback that setting e.g. BOARD_ROOT in CMakeLists.txt is
not quite well specified; in particular, it's important to do so
before pulling in the boilerplate via find_package(). Clear that up.
Reported-by: Pete Skeggs <peter.skeggs@nordicsemi.no>
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Device objects in Zephyr are currently placed into an array by linker
scripts, making it easy to iterate over all devices if the array
address and size can be obtained. This has applications in device
power management, but the existing API for this was available only
when that feature was enabled. It also uses a signed type to hold the
device count.
Provide a new API that is generally available, but marked as internal
since normally applications should not iterate over all devices. Mark
the PM API approach deprecated.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
DEVICE_AND_API_INIT and DEVICE_DEFINE are identical except that
DEVICE_DEFINE adds a parameter providing the device pm control
function, while DEVICE_AND_API_INIT does not. This requires duplicate
implementations where if CONFIG_DEVICE_POWER_MANAGEMENT is enabled
then DEVICE_AND_API_INIT delegates to DEVICE_DEFINE with a dummy pm
control function, and if it is not enabled then DEVICE_DEFINE discards
the parameter and delegates to DEVICE_AND_API_INIT.
DEVICE_INIT is like DEVICE_AND_API_INIT but doesn't provide an API.
Clean this up by refactoring so that DEVICE_DEFINE is the core
implementation, providing with and without device power management
right next to each other where they can be compared and maintained.
Redefine DEVICE_INIT and DEVICE_AND_API_INIT delegate to
DEVICE_DEFINE.
Also remove duplicate code by extracting the variations due to
enabling device power management into macros.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This add a new option `--no-index-modules` which works similarly to
`--modules` but does not generated index pages, only retains the
tweaking of how paths are displayed on symbol information pages,
showing '<title>/path/within/module/Kconfig' for paths that fall
within modules.
This is required by NCS, where there are more "modules" which we don't
want to have indexes for.
Signed-off-by: Fabio Utzig <fabio.utzig@nordicsemi.no>
Since this is an experimental API and MACRO_MAP() was deprecated in
favor of FOR_EACH() in zephyr v2.3.0, we are within our rights to just
remove it without notice now. Do so and mention it in the release
notes.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This file contains definitions for macros which are integral to
significant Zephyr use cases, such as CONTAINER_OF() and various
macros used by devicetree.h internally.
As such, in practice we expect at least advanced (if not intermediate)
users to understand it, so the fact that it's not formally documented
as an API with a stability level is a problem.
Fix that by giving the docstrings a once-over and adding new ones
where they are missing. Move all the remaining non-API macros to
util_internal.h.
Add a Sphinx API page for this header, and include it in the API
overview at "experimental" stability level.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Added CONFIG_UART_ASYNC_API to enable documentation generation for
asynchronous API.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
It was not clear that hexdump messages does not support prepending
with function name. Added clarification.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The driver API should be assigned at the time the device is defined.
Assigning in the init function is redundant and prevents moving the
pointer to a immutable driver structure.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Now there's an audio reference section move the i2s docs there
as the audio section is a better fit.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
The probe_id keyword was added to support overriding the inferred id
when determining the board-id to use when flashing. Document the
keyword.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Prior to addition of schema validation running sanitycheck
--generate-hw-map would preserve the value of any field in an existing
map that it didn't update. These fields now cause a parsing error.
Add notes as an optional key where information relevant to the board
can be added to provide useful context (such as which serial port
corresponds to the console, or why a non-standard runner is required).
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Recommend that Kconfig symbols related to deprecated features use
'DEPRECATED' in the symbol name instead of 'LEGACY'.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit updates the Zephyr documentation with changes introduced
by Zephyr CMake package.
It removes 'zephyr-env.sh/cmd' where no longer needed, and updates
boilerplate inclusion to find_package.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
These CVEs have been released from embargo. Include details in the v2.3
release notes, and in the vulnerabilities document.
Signed-off-by: David Brown <david.brown@linaro.org>
This commit fills the Build and Infrastructure section with the Zephyr
CMake package enhancement.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Signed-off-by: Carles Cufí <carles.cufi@nordicsemi.no>
K_THREAD_DEFINE can no longer use K_NO_WAIT to specify the delay after
the timer API rework. Fix the documentation to use 0 and add a note.
Fixes#25697.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Complete the list of added ARM SoCs and SoC Series
in Zephyr v2.3.0 release cycle.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Complete the list of added ARM Boards in Zephyr
v2.3.0 release cycle.
Add deprecation note for efr32_slwstk6061a.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Describe how an API can be deprecated, which is via the __deprecated
keyword or by introducing a legacy Kconfig option.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This provides a better error message when building with CMake and
forgetting ZEPHYR_BASE or not registering Zephyr in the CMake package
registry. See parent commit for more details (split from parent for
better readability).
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
I believe the devicetree documentation for the release is in good
enough shape now. Add a few more links to the release notes to provide
users with more hints for adapting to the new API.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add test cases that verify various bits and pieces of the legacy
devicetree macros match the new APIs.
Writing these test cases without giving rise to deprecated macro
warnings which might break people's CI if they build with -Werror
requires turning off the __WARN() generation in
devicetree_legacy_unfixed.h. The entire file is deprecated at this
point and must be explicitly enabled with an opt-in Kconfig option, so
there isn't any harm in doing this.
Nevertheless, take a minimally invasive approach to avoiding __WARN()
generation in gen_legacy_defines.py, to avoid the possibility of
breakage. This code is basically frozen anyway, so hacks like this
won't cause maintainability problems since it isn't being actively
maintained.
Use the new tests as fodder for a migration guide from the old API in
the documentation.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The ZephyrBuildConfiguration package allow downstream users to control
the Zephyr build system using a cmake package.
A Zephyr Build Configuration package allows for setting of additional
DTS_ROOT, BOARD_ROOT, and similar variables without having to patch
Zephyr repo, but it also allows for inclusion of additional boilerplate
code for more advanced use cases.
The repository or folder containing the Zephyr Build Configuration
package must be on toplevel in the Zephyr workspace.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Update V2.3.0 release note for stm32 with:
- Added SoC series
- New boards support
- Noticeable changes in stm32 drivers and subsystems
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2 useful functions implemented, sample for read()/write() added
(or rather, existing sample to modified to support that).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Add some introductory text to these driver helpers which makes it more
clear how they are defined in terms of the generic APIs, which allows
removing some boilerplate from doxygen. This also gives us a chance to
call out the exceptional cases and add some more documentation to those.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Update the diagrams. Doing this in a separate commit so the SVG diff
doesn't clutter up other patches.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Some updates to the reference page for the "core" APIs, and associated
follow-ups in the guides:
- centralize documentation of chosen zephyr nodes in a non-legacy
file, provide a reference to them from the intro page in the guide
- review doxygen docstrings and correct errors for generic APIs
- add introductory text to each section in the API reference
- add missing hardware-specific pages
Documentation for layers built on top of these is mostly left to future
commits, but I do have a smattering of fixes in the guides that I
noticed while I was doing this.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This reverts commit ac898bc49e.
This commit was merged by mistake, but in a way that was against the
decision of the TSC on May 20, 2020, which was to wait a week to let
people digest befor merging.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The sidebar for User Mode wasn't set up correctly and
it wasn't obvious that there are linked sub-pages with
design details about memory domains, system calls, kernel
objects, and so forth.
Split the introductory material into its own overview
page and set up the table of contents properly.
The text of the threat model, high level policy details,
and constraints sections is unchanged.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The ZephyrExtension package allow downstream users to extend the current
Zephyr package.
A ZephyrExtension package allows for setting of additional DTS_ROOT,
BOARD_ROOT, and similar variables without having to patch Zephyr repo.
The repository or folder containing the ZephyrExtension package must be
on toplevel in the Zephyr workspace.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Give instructions how to run multiple Zephyr instances in QEMU
or native_posix, and connect them together.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit updates the documentation so that it no longer requires
ZEPHYR_SDK_INSTALL_DIR and ZEPHYR_TOOLCHAIN_VARIANT to be used when
using the Zephyr SDK.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
The device structure definition in the code has drifted from the
displayed version in the documentation. Update the documentation to
match.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The underlying structure is not suitable for use in API invoked from
user threads for the reasons explained in the edit.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Extend the provided template with annotated examples of API based on
whether the functions must be invokable from user mode threads, since
there are currently no in-tree examples of the specific techniques
required.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
We modify the content around the Release Team formation,
and maintenance, describing in detail how maintainers
may be added to the team. Add a comment about Release
Managers that stresses that they must be members of the
team. Add details on how the TSC shall ensure a functional
release team. Add details on how the release team will
be picking release managers (cadence and selection process).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We add a section that clarifies how the project
roles may be removed. We stress that the rules
will apply to elected project roles that the TSC
may define in the future.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We need to clarify how Maintainers may become voting
TSC member, and direct this to the Charter guidelines.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add DT_NODE_BY_FIXED_PARTITION_LABEL that given a "label" in any
fixed-partitions map will return the node_id for that partition node.
Add DT_NODE_HAS_FIXED_PARTITION_LABEL that will test if a given
fixed-partitions "label" is valid.
Add DT_FIXED_PARTITION_ID that will return an unique ordinal value for
the partition give a node_id to the partition.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Several reviewers agreed that DT_HAS_NODE_STATUS_OKAY(...) was an
undesirable API for the following reasons:
- it's inconsistent with the rest of the DT_NODE_HAS_FOO names
- DT_NODE_HAS_FOO_BAR_BAZ(node) was agreed upon as a shorthand
for macros which are equivalent to
DT_NODE_HAS_FOO(node) && DT_NODE_HAS_BAR(node) &&
- DT_NODE_HAS_BAZ(node), and DT_HAS_NODE_STATUS_OKAY is an odd duck
- DT_NODE_HAS_STATUS(..., okay) was viewed as more readable anyway
- it is seen as a somewhat aesthetically challenged name
Replace all users with DT_NODE_HAS_STATUS(..., okay), which is
semantically equivalent.
This is mostly done with sed, but a few remaining cases were done by
hand, along with whitespace, docs, and comment changes. These special
cases include the Nordic SOC static assert files.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Include documentation for CVE issues that are now out of embargo. This
includes links to the CVE database, as well as referencing the PRs
within Zephyr that fix these issues.
Signed-off-by: David Brown <david.brown@linaro.org>
Add more HOWTO information for the two current devicetree-based device
instantiation styles, and a bit more information on how to create
devices that depend on others.
Point to this from the Kconfig tips page, since it is meant as a
replacement for existing Kconfig practice.
Update macros.bnf.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Usually, we want to operate only on "available" device
nodes ("available" means "status is okay and a matching binding is
found"), but that's not true in all cases.
Sometimes we want to operate on special nodes without matching
bindings, such as those describing memory.
To handle the distinction, change various additional devicetree APIs
making it clear that they operate only on available device nodes,
adjusting gen_defines and devicetree.h implementation details
accordingly:
- emit macros for all existing nodes in gen_defines.py, regardless
of status or matching binding
- rename DT_NUM_INST to DT_NUM_INST_STATUS_OKAY
- rename DT_NODE_HAS_COMPAT to DT_NODE_HAS_COMPAT_STATUS_OKAY
- rename DT_INST_FOREACH to DT_INST_FOREACH_STATUS_OKAY
- rename DT_ANY_INST_ON_BUS to DT_ANY_INST_ON_BUS_STATUS_OKAY
- rewrite DT_HAS_NODE_STATUS_OKAY in terms of a new DT_NODE_HAS_STATUS
- resurrect DT_HAS_NODE in the form of DT_NODE_EXISTS
- remove DT_COMPAT_ON_BUS as a public API
- use the new default_prop_types edtlib parameter
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
init_fn is not anymore part of struct device, so let's test instead the
driver's API structure pointer which is also unique per device driver.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
We add a note in the Zephyr v2.3.0 release notes to highlight
a renaming in the Floating Point Services main Kconfig options,
which was done in the 2.3 release cycle.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Linux distro might not have a python3-dev package installed by default,
which will give an error during Python dependencies installation.
Closes#25128.
Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@gmail.com>
This commit renames the Kconfig `FP_SHARING` symbol to `FPU_SHARING`,
since this symbol specifically refers to the hardware FPU sharing
support by means of FPU context preservation, and the "FP" prefix is
not fully descriptive of that; leaving room for ambiguity.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Added support for Qemu User Networking and tested with
qemu_x86 model. The support is kept simple assuming that
the TAP interface will always be preferred for more
sophisticated / practical use cases.
QEMU User Networking is implemented using "slirp", which
provides a full TCP/IP stack within QEMU and uses that
stack to implement a virtual NAT'd network. As this
support is built into QEMU, it can be used with any model
and requires no admin privileges on the host machine,
unlike TAP.
Added documentation to facilitate the user.
Signed-off-by: Bilal Wasim <bilalwasim676@gmail.com>
The macro iterates through the list of child nodes and invokes provided
macro for each node.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We have a new heap implementation replacing mem_pool. Add docs on its
API and internals, and add a deprecation note to the mem_pool section.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The recent work with k_timeout_t has invalidated much of the existing
timing documentation. Rewrite the section focusing on the new API,
adding details on the internals and driver-facing API. Includes a
porting guide for legacy applications and subsystems.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Add some documentation and diagrams for OS library data structures:
dlist/slist, rbtree and ring buffer.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Add application control of initiating phy change procedure and it's
parameters.
The reasons for allowing the application control over the PHY:
- Allow changing to Coded PHY.
- Application may change PHY to react to changes in environment
to balance throughput and range.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add application control of initiating data length procedure and it's
parameters.
The reasons for allowing the application control over the data length:
- Bandwidth control adjusted based on number of active connections.
- Changing data length before switching to coded phy.
- Applying workarounds for interoperability problems.
- Controlling order of ATT MTU and data length procedures.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The DS3231 is an I2C real-time clock with internal temperature
compensated oscillator, maintaining civil time to 1 s precision with
nominal 2 ppm accuracy from 0-40 Cel.
The basic functionality is exposed as a counter that is always running
at 1 Hz. Much more functionality is exposed as driver-specific API,
including the ability to translate between the time scale of the DS3231
and the time scale of the Zephyr uptime clock. This allows correlation
of events in the system clock to UTC, TAI, or whatever time scale is
used to maintain the DS3231.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Various commands are getting put into their own sections when they are
really just steps along the way towards getting zephyr and installing
Python dependencies. Group them together in a section by that name,
moving the west install step there.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Strip out text that isn't needed to try to minimize the GSG's length.
Fix up some grammar nits.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Update the feature tracking page with a couple of new categories that
have been identified as missing during the Release Readiness meetings:
- Hardware support
- Meta
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Rename DT_HAS_NODE to DT_HAS_NODE_STATUS_OKAY so the semantics are
clear. As going forward DT_HAS_NODE will report if a NODE exists
regardless of its status.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This library supports stream writes to flash with
optinal progressive erase.
This module is a direct copy of the functionality found in
subsys/dfu/img_util/flash_img.c
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
The removal of mentions of 'ext' from the documentation needs an
adjustment in the Eclipse debugging page, since 'modules' is not a
subdirectory of the zephyr base directory.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Fixes: #24903
This commit now includes ${ZEPHYR_BASE}/cmake/python.cmake to locate
python3.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
We did not have any reference to queues and doxygen information were not
linked correctly. Add a placeholder and pull in doxygen data so whenever
someone adds a reference, a link is created.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Certain Qualcomm controllers do not accept our settings for Host Buffer
Size:
< HCI Command: Host Buffer Size (0x03|0x0033) plen 7 #19 [hci0]
22.391048
ACL MTU: 27 ACL max packet: 6
SCO MTU: 0 SCO max packet: 0
> HCI Event: Command Complete (0x0e) plen 4 #20 [hci0]
22.391525
Host Buffer Size (0x03|0x0033) ncmd 1
Status: Invalid HCI Command Parameters (0x12)
Likely due to the fact that we do not reserve space for any SCO packets
in the Host.
Other Controllers (Realtek) seem to not transmit any data at all in the
Controller to Host direction if Controller to Host flow control is
enabled.
Document this fact in the User Guide so that users know what to do when
this happens.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Struct members are not always documented in the zephyr online HTML
documentation. Enable it for all Bluetooth related documentation
groups.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add information on security vulnerabilities fixed in this release.
These CVEs are under embargo, and vulnerabilities page will be updated
when the embargo ends.
Signed-off-by: David Brown <david.brown@linaro.org>
Add debug configuration to easily enable logging through RTT. Required
to use RTT since the UART is otherwise used for the h4 UART driver.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This commit renames the Kconfig `FLOAT` symbol to `FPU`, since this
symbol only indicates that the hardware Floating Point Unit (FPU) is
used and does not imply and/or indicate the general availability of
toolchain-level floating point support (i.e. this symbol is not
selected when building for an FPU-less platform that supports floating
point operations through the toolchain-provided software floating point
library).
Moreover, given that the symbol that indicates the availability of FPU
is named `CPU_HAS_FPU`, it only makes sense to use "FPU" in the name of
the symbol that enables the FPU.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The NET_DEVICE_INIT(), NET_DEVICE_INIT_INSTANCE() and
ETH_NET_DEVICE_INIT() macros changed and take new device power
management function pointer parameter.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This documentation is well-intentioned but not good advice.
The reason why we have a vtable-like API abstraction at the
driver subsystem level is to introduce object orientation.
The subsystem defintions implement an abstract class that
specific driver implementations all implement, providing
a common interface for end users. Multiple drivers may be
written for a subsystem that are interchangeable to the end
user.
However, there is no point in introducing a vtable-like
abstraction for APIs which are specific to a single driver.
We are not trying to present an interface abstraction which
could support multiple implementations. There is just one.
Simply declare a function in a header, and implement it in
the driver's C file.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Rename internal macros to use Z_ prefix instead of _K..
Those macros were missed when we did the global renaming activities.
Fixes#24645
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This default-y option allows continued use of the legacy devicetree
macros.
There are no functional changes yet, but when this is default n,
old-style DT code won't build. At that point, adding any of these will
be a fix to keep old-style code working:
- "CONFIG_LEGACY_DEVICETREE_MACROS=y" to prj.conf
- "-- -DCONFIG_LEGACY_DEVICETREE_MACROS=y" to the west build command
- "-DCONFIG_LEGACY_DEVICETREE_MACROS=y" to the cmake command
This option can be changed to default n in time for the Zephyr 2.3
release. That will provide users of Zephyr 2.2 with a smooth migration
path to the new devicetree.h API after 2.3 is released, which
nonetheless will alert them immediately that something is wrong due to
build errors.
Unfortunately, __DEPRECATED_MACRO is not sufficient in all cases as a
warning to users. This is because, at least in GCC, macros defined
using __DEPRECATED_MACRO cannot be used in preprocessor lines like
"#if DT_SOME_LEGACY_MACRO".
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The net_idx parameter has been removed from the Health Client
model APIs since it can be derived (by the stack) from the
app_idx parameter
Signed-off-by: Lingao Meng <mengabc1086@gmail.com>
According Mesh Profile 1.0.1. A application key shall
binding single network key. And Device key shall bind all
network key, and dev key only known by cfg_cli and node self,
only used by cfg_cli & cfg_srv.
Fixes: #21088
Signed-off-by: Lingao Meng <mengabc1086@gmail.com>
This change adds full shared floating point support for the RISCV
architecture with minimal impact on threads with floating point
support not enabled.
Signed-off-by: Corey Wharton <coreyw7@fb.com>
The original description for isr-ok allowed the function to return an
error if called from an interrupt context, rather than doing its job.
This led to complex descriptions like "isr-ok but not sleep" to
indicate that the function could be called from thread or interrupt
context without visible behavior changes, including returning an
error based on calling context.
Remove the special terminology for cases where a function returns an
error (rather than causing undefined behavior) when invoked from an
interrupt or pre-kernel. Redefine isr-ok to indicate that the call
does what it's supposed to do regardless of interrupt or thread
context, delegating the description of allowed behaviors to the API
documentation (which should explicitly note when it's allowed to fail
to perform in non-thread context).
This also makes more clear that isr-ok applies to functions regardless
of whether they can cause an invoking thread to context switch.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The previous architecture proved unable to support user expectations,
so the API has been rebuilt from first principles. Backward
compatibility cannot be maintained for this change.
Key changes include:
* Formerly the service-provided transition functions were allowed to
sleep, and the manager took care to not invoke them from ISR
context, instead returning an error if unable to initiate a
transition. In the new architecture transition functions are
required to work regardless of calling context: it is the service's
responsibility to guarantee the transition will proceed even if it
needs to be transferred to a thread. This eliminates state machine
complexities related to calling context.
* Constants identifying the visible state of the manager are exposed
to clients through both notification callbacks and a new monitor API
that allows clients to be notified of all state changes.
* Formerly the release operation was async, and would be delayed for the
last release to ensure a client would exist to be notified of any
failures. It is now synchronous.
* Formerly the cancel operation would fail on the last client associated
with a transition. The cancel operation is now synchronous.
* A helper function is provided to safely synchronously release a
request regardless of whether it has completed or is in progress,
satisfying the use case underlying #22974.
* The user-data parameter to asynchronous notification callbacks has
been removed as user data can be retrieved from the CONTAINER_OF
the client data.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This adds USB_PID_BLE_HCI_H4_SAMPLE along with it driver which uses H4
over bulk endpoints.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
DAC (digital to analog converter) peripheral driver with a generic API
suitable for most MCUs (only basic DAC features considered).
Signed-off-by: Martin Jäger <martin@libre.solar>
The command-line is correct but specifies a particular release, which
may be out of date, and is not formatted as a URL that can be clicked.
Add a proper link.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Update release notes for deprecation of the bt_conn_create_slave_le
API call, which has now been deprecated in favour of bt_le_adv_start
with peer address in advertising parameters instead.
Fix previously mistake about BT_LE_ADV_* deprecated macros,
application should use GAP defines, and not HCI defines.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add generation of the following macros:
DT_N_<node-id>_REG_IDX_<idx>_EXISTS 1
DT_N_<node-id>_IRQ_IDX_<idx>_EXISTS 1
This will allow us to use IS_ENABLED() in DT_REG_HAS_IDX and
DT_IRQ_HAS_IDX which matches behavior of other DT_*_HAS_* macros as
well as lets use these with COND_CODE_1.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add a devicetree/zephyr.h header, which is meant to contain
definitions for /chosen properties specific to Zephyr.
Currently, this just deals with zephyr,entropy. We add a
DT_CHOSEN_ZEPHYR_ENTROPY_LABEL macro which expands to the label for the
node pointed to by zephyr,entropy.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add generation of the following macros:
DT_N_<node-id>_P_<prop-id>_NAME_<NAME>_EXISTS
DT_N_<node-id>_P_<prop-id>_IDX_<idx>_EXISTS
This will be useful to check availability of named or indexed
property like dmas/dma-names.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Those are used only in tests, so remove them from kernel Kconfig and set
them in the tests that use them directly.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Sometimes you are only interested in doxygen, so need to wait 10 minutes
for everything to generate in this case. Now just do:
make doxygen
and get only the doxygen output.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
ext/hal/cmsis was moved out of the ext folder and into external modules
so we should remove the licensing exceptions noted in this document.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
HWINFO drivers should be responsible for ensuring that
the data structure is a sequence of bytes. That is not
what the current sam0 and nordic drivers do. The drivers
read the data as u32_t and then memcpy the data to a
buffer. This ensures the data has the endianness of the
underlying MCU, which in this case is Cortex M0 which
is little endian.
This commit fixes the endianness so the data can be
interpreted as a "left to right sequence of bytes".
This commit updates the API doc to provide clarification
of the data structure.
Add to 2.3 release notes.
Fixes#23444, #24103
Signed-off-by: Steven Slupsky <sslupsky@gmail.com>
Zephyr board names must be globally unique which requires that they
encode all necessary information to identify a specific target.
Typing in these names can be inconvenient to developers working on
multiple targets within a single workspace.
Extend the cmake infrastructure to read an optional board aliases file
that will map custom aliases to the corresponding canonical Zephyr
board name.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
When this west doc page was written, we didn't have any documentation
for modules. We do now, so point to it instead of CMake.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Due to the use of UTIL_EVAL*() macros, the UTIL_LISTIFY() macro used
by DT_INST_FOREACH(foo) can cause long build errors when there is a
build error in the expansion for "foo". More than a thousand lines of
build error output have been observed for an error in a single line of
faulty C.
To improve the situation, re-work the implementation details so the
errors are a bit shorter and easier to read. The use of COND_CODE_1
still makes the error messages quite long, due to GCC generating notes
for various intermediate expansions (__DEBRACKET,
__GET_ARG_2_DEBRACKET, __COND_CODE, Z_COND_CODE_1, COND_CODE1), but
it's better than the long list of UTIL_EVAL notes.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Fix the board redirects. The following boards existed before we moved to
a new style of URL for boards, and thus each have 2 entries (old style
old name to old style new name; new style old name to new style
new name):
- nrf51_pca10028
- nrf52810_pca10040
- nrf52840_pca10056
- nrf52840_pca10059
- nrf52_pca10040
- nrf52_pca20020
The following boards did not exist (or were not referenced) before we
moved to the new style of URL for boards, and thus only have one entry
(new style old name to new style new name):
- nrf51_pca10031
- nrf52811_pca10056
- nrf52833_pca10100
- nrf52840_pca10090
- nrf5340_dk_nrf5340
- nrf9160_pca10090
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The original API was misnamed, as the intent was to provide a manager
that decoupled state management from the service that needed to be
turned on or off. Update all the names, shortening them where
appropriate removing unncessary internal components like _service.
Also remove some API that misled developers into believing that onoff
managers are normally expected to be exposed directly to consumers.
While this is a use case, in most situations there are service or
client-specific actions that need to be coupled to transition events.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
k_poll() for a signal is often desired for notification of completion
of asynchronous operations, but there are APIs where it may be
necessary to invoke "asynchronous" operations from contexts where
sleep is disallowed, or before the kernel has been initialized.
Extract the general notification solution from the on-off service into
a utility that can be used for other APIs.
Also move documentation out to a resource management section.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
We are renaming the nrf5340 DK documentation page, and due to
re-organizing the doc directory we need to allow redirecting
the old URLs for nrf5340 DK board targets' documentation.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The board name for the Thingy:52, so far known as nrf52_pca20020, is
renamed to thingy52_nrf52832. Its documentation and all references to
its name in the tree are updated accordingly. Overlay and configuration
files specific to this board are also renamed, to match the new board
name.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The board name for the nRF52840 Dongle, so far known as
nrf52840_pca10059, is renamed to nrf52840dongle_nrf52840. Its
documentation and all references to its name in the tree are updated
accordingly. Overlay and configuration files specific to this board are
also renamed, to match the new board name.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The board target for emulation of nRF52810 on nRF5DK, so far
known as nrf52810_pca10040, is renamed to nrf52dk_nrf52810.
Its documentation and all references to its name in the tree are
updated accordingly. Overlay and configuration files specific to
this board are also renamed, to match the new board name.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The board name for the nRF52 DK, so far known as nrf52_pca10040, is
renamed to nrf52dk_nrf52832. Its documentation and all references
to its name in the tree are updated accordingly. Overlay and
configuration files specific to this board are also renamed, to
match the new board name.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Handler functions are now referred to as verification functions,
update documentation to reflect this.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
"why can't I run west build" is a common enough question to add an FAQ
item for it in the troubleshooting page.
Even if people don't read it, we can still link to it on Slack etc.
when the question gets asked.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
And implement DT_ANY_INST_ON_BUS() in terms of it.
This makes some error messages quite a bit shorter by avoiding
UTIL_LISTIFY(), which has a nasty temper and tends to explode if not
treated gently.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
We are renaming the nrf9160 DK documentation page, and due to
re-organizing the doc directory we need to allow redirecting
the old URLs for nrf916 DK board targets' documentation.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
In order to de-duplicate 2 macros with the same use,
merge BUILD_ASSERT(), BUILD_ASSERT_MSG() into one macro.
Make BUILD_ASSERT_MSG() deprecated.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Add a section in the 2.3 release notes for the API changes, and document
the ones introduced by the Advertising Extensions support in the BLE
Host.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Trivial cleanup: sort the devicetree/foo.h includes and the relevant
sections for them in the documentation.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This commit changes the current boilerplate include description and
instead describes the use of find_package(Zephyr)
It also add a section covering additional possibilities when using
find_package(Zephyr).
- Search order
- Zephyr repository application description
- Zephyr workspace application description
- Zephyr freestanding application description
- Environment ZEPHYR_BASE setting
- Multiple Zephyr and preference setting
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
With the introduction of ZephyrConfig.cmake all parts of CMake code
should rely on the CMake ZEPHYR_BASE variable instead of the environment
setting.
This ensures that after the first CMake invocation, then all subsequent
invocation in same build folder will use same zephyr base.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The nRF52840 DK board target, so far known as nrf52840_pca10056,
is renamed to nrf52840dk_nrf52840.
Its documentation and all references to its name in the tree are
updated accordingly. Overlay and configuration files specific to
this board are also renamed, to match the new board name.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Updated howto "create struct devices in a driver" section to use
DT_INST_FOREACH instead of manual per-instance macros.
Signed-off-by: Ioannis Papamanoglou <iopapamanoglou@gmail.com>
The documentation was not updated following a change to the way
DT_PROP_LEN works which was made in review. Fix it.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The board porting guide now has useful information on supporting
flash/debug commands. Link to it from the top of the page describing
these commands to hopefully make it easier to find.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This is joint work with Kumar Gala (see signed-off-by).
Document the changes to the generated node macros in macros.bnf,
moving the old file to legacy-macros.bnf and putting it in its own
section.
The actual generated macros are now a low-level detail, so rewrite the
foregoing sections as examples in terms of the new <devicetree.h> APIs.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We rename the nRF51 Dev Kit board target (nrf51_pca10028)
to nrf51dk_nrf51422. We update all associated references
in the supportive documentation and all nRF51-related
cofigurations and overlay files in the samples and tests
in the tree.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This page has a lot more information about APIs than just stability,
and I believe it's currently our only exhaustive list of APIs.
Rename it to API Overview.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This was still set to 3.4, and does not include REQUIRED to fail the
build in case of an old version.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
k_cpu_idle() API does not need to be invoked with interrupts
unlocked; it is actually invoked with interrupts locked by
the kernel CPU idling mechanism. In most architectures, the
function is, actually, un-locking interrupts itself. We need
to remove this comment from the documentation of the CPU
idle API. We add a note about the un-locking of interrupts.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This reverts commit 974aa3add4.
Pull Request #23437 was merged by mistake with an invalid manifest.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
In order to de-duplicate 2 macros with the same use,
merge BUILD_ASSERT(), BUILD_ASSERT_MSG() into one macro.
Make BUILD_ASSERT_MSG() deprecated.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Move the section describing the requirements for a new API out of the
peripheral API header, clarify the requirements for upgrading an API to
experimental and unstable clearly in the corresponding sections. Add a
link to the API stability page.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Document how whitespace is used in Kconfig sources. This serves as an
authoritative reference in code review.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Name all subsystem reference consistently with an '_api' postfix and
clean up naming and folder structure in some cases.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Move the terminology section to its own page in preparation for
additional sections to be addded later.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This never needed to be put in a separate gperf table.
Privilege mode stacks can be generated by the main
gen_kobject_list.py logic, which we do here.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Private type, internal to the kernel, not directly associated
with any k_object_* APIs. Is the return value of z_object_find().
Rename to struct z_object.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Rather than stuffing various values in a uintptr_t based on
type using casts, use a union for this instead.
No functional difference, but the semantics of the data member
are now much clearer to the casual observer since it is now
formally defined by this union.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add a link and a note about the Project Roles' documentation in
contribute/index.rst.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add initial version of Project Roles documentation.
The initial version contains the content that has
already been approved by the TSC on Feb 5, 2020.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
I've been seeing these cause errors on the more recent versions of
Doxygen which come with Arch Linux for a while now. Fix these:
error: Illegal format for option TCL_SUBST, no equal sign ('=') specified for item 'YES'
$ZEPHYR_BASE/tests/kernel/mem_protect/futex/src/main.c:461: warning: end of file with unbalanced grouping commands
Just trying to get them out of my local output and as preparation for
whenever they start showing up for Ubuntu.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Provide a rule to settle on MPU activation by default.
Request is to activate it by default if board resources allow.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
When redirecting from old-topic.html#some-id to new-topic.html,
the ID is ignored.
Not sure if it is possible to keep the ID in the meta redirect,
but at least in the JavaScript version we should keep it and
redirect from old-topic.html#some-id to new-topic.html#some-id.
Signed-off-by: Ruth Fuchss <ruth.fuchss@nordicsemi.no>
This is a copy of rand32_timer.c that uses
z_do_read_cpu_timestamp32() instead of k_cycle_get_32(),
with some logic to ensure different values when called in
rapid succession missing.
Like the other driver, its reported values are not random,
it's a testing generator only.
This appears to have no advantages over rand32_timer.c,
just remove it. In QEMU emulation, the reported TSC values
tend to have the lowest five bits zeroed.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Improve settings example snippet so that it builds and works as
expected. For usability purposes, add print of stored value.
Signed-off-by: Jacob Siverskog <jacob@teenage.engineering>
Add 2.2.0 to the version pick list. Also remove old versions so that
the oldest one is the LTS release.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add a warning about the Gatekeeper issues that Catalina introduces in
the section about GNU Arm Embedded.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The GSG already includes the setup instructions. Remove the
duplicate that existed in installation_win.rst.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The GSG already includes the setup instructions. Remove the duplicate
that existed in installation_mac.rst.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
ARC didn't have many changes, but there's a bunch of irq-related
fixes since the last release, so mention these.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Now that the west parts of this file are in better shape, it seems a
shame not to flesh out the rest a bit more.
It's been a while since we looked at this document, as it's still
referring to boards (like Arduino 101) that are no longer supported by
Zephyr, and is generally lacking in concrete, step-by-step advice
for going from zero to working board.
Let's fix that.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
In addition to having security vulnerability fixes reported within each
release note page, consolidate all of them in a new vulnerabilities
document.
This gives us two advantages: 1. The vulnerabilities can easily be
referenced in a single place, which is useful for someone trying to
cross reference against CVE lists, and 2. It allows a release to be made
with just CVE numbers when issues are under embargo, and the details can
be added to this vulnerabilities page. The release notes will be locked
to a tag, and updates will not be visible.
Signed-off-by: David Brown <david.brown@linaro.org>
Describe how to work around the Gatekeeper enforcement of security
policies in apps launched from the Terminal.
Fixes#23168.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add a note that describes the fact that blinky does not run on all
boards supported by Zephyr, and propose an alternative (Hello World) for
those boards.
Fixes#23169.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Improve the documentation of the blinky sample, fixing typos, adding
links to the relevant DT documentation and cleaning up a bit.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Adds 2.2 release notes for all remaining driver classes. Moves RISC-V
driver changes from the architectures section to the drivers section.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Makes this page a little more visible to porters.
Suggested-by: Lucian Copeland <hierophect@gmail.com>
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Since the latest version available for download works well, there is no
reason anymore to warn the users about a particular, older toolchain
version not working correctly on Windows.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Several users have noticed that the SDK version in the GSG is outdated.
Update it to the latest, 0.11.2.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The "fixed-clock" value referenced in the documentation is actually a
compatible value, not a property name. Fix that.
Harden the "expected to have a clock-frequency property" language to
use "must" instead of "expected". The scripts error out if a node with
fixed-clock compatible is missing a clock-frequency property; it's not
a soft expectation.
Be explicit about clock-frequency units.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Remove all "supported: -hwinfo" definitions from the boards
yaml files and documentation. hwinfo can generally be tested
on every board because it returns -ENOTSUP if not supported.
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
Added references to missing settings API groups so them
will be generated in documentation build.
Missing API are doxygen subgroup of already referenced doxygen group,
but subgroups aren't automatically extracted to the documentation
output.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
This nomenclature change was done in west 0.7 because it seems to be a
lot easier for people to understand. Propagate it to all the west
documentation.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The main change is that west 0.7 is not a namespace package anymore.
Make some other improvements while here.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add example west.yml files showing how to build west workspaces of
each type. Split these into separate sections as a result since
they're longer.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This commit adds the list of ARM SoCs whose support was
added during the Zephyr v2.2 release cycle.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
In the 2.2 release notes add the list of ARM boards, whose
support was added during the 2.2 release cycle.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Syntax highlight all the DTS fragments, add more internal
cross-referencing to making jumping around the HTML easier, and tweak
the language, filling in a missing piece here and there.
Fix a couple of DTS syntax errors caught by adding highlighting.
Add an ABNF grammar for the macros generated by DT, along with
some comments about why the current grammar is not ideal from a
generality point of view.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Syntax highlight all the DTS fragments and add some more explanatory
text.
Split the content about important properties into its own section, and
add a similar section about unit addresses.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
We move the removal of the CC2650 board to the
section about ARM Boards (add, remove).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Change Zephyr kernel to Zephyr RTOS in Release Notes'
title for v2.2 release, stressing that we deliver an
RTOS instead of a kernel only. Consistent with Zephyr
2.0 release notes.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add a page describing the high-level design goals for how Zephyr
should use DT, with examples and counter-examples from current
practice.
Add a TBD section for code generation. It's not clear (to me at least)
where the discussion on that has landed.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Combine various bits of information that were formerly scattered about
into a logical order, and fix a few mistakes.
Make some policy changes, e.g. discouraging the use of fixup macros.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The one page on devicetree is too long. Split it into multiple pages
to make it easier to digest and more squintable. This is basically
just moving content around; minimal changes have been made apart from
redoing some transitions and adding a couple of introductory paragraphs.
Rename the 'device-tree' Sphinx :ref: target while we are here.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The method used to link code partition, as defined by
zephyr,code-partition has been modified in Zephyr 1.14. Update the
"Linking Zephyr Within a Partition" section to reflect the change.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
This is noisy and getting in the way when I try to read the actual
warnings and errors in the output.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add detailed documentation for macros that get generated by
gen_defines.py. Covers properties, interrupts, phandle-arrays, clocks,
buses, flash partitions, SPI, etc.
Should be relatively complete now, though there might be overlooked
details.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Co-Authored-By: Kumar Gala <kumar.gala@linaro.org>
Co-Authored-By: Marti Bolivar <marti.bolivar@nordicsemi.no>
CANBUS can be considered a subsystem of its own so moving
it from Networking to own chapter.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In the section 'Documentation presentation theme' put a reference to
'install_py_requirements' section in the getting start guide.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Reflect changes in the APIs made since 0.6.0. These will also need to
be added to the release notes.
Some automatic directives weren't generating the desired output, so
either do it by hand or let new 0.7.0 docstrings supply the information.
Try to better group the content into sections.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
West now supports importing other manifest files. Document the basic
behavior.
Add a local table of contents for HTML output, to get a quick index of
the subsections of the "Manifest Imports" section.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
For some time now we are building also the C++ samples in
native_posix in CI.
For those who want to run the whole suite locally, they
require g++-multilib, which was missing in the Ubuntu list
=> Add it.
Similarly the display sample is built in CI for
native_posix64, so add the 64bit SDL dev library to both
the Ubuntu and Fedora lists.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Similar to pairing_confirm this callback is called each
time a peer requests pairing, but for all types of
pairings, except SSP. The pairing req/rsp information is
passed as a parameter so the application can decide
wheter to accept or reject the pairing.
Fixes: #21036
Signed-off-by: Martin Rieva <mrrv@demant.com>
Instead of using a custom offloading interface, users can use
`NET_SOCKET_REGISTER` macro to register custom socket API provider. This
solution removes a limitation, that only one offloaded interface can be
registered and that it cannot be used together with native IP stack.
The only exception remainig are DNS releated operations -
`getaddrinfo`/`freeaddrinfo`, which, when offloaded, have to be
registered specifically.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Corrected improper return value description of
settings_runtime_get().
Added return value description to each of settings handler
description.
Include run-time API into doxygen build.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
zephyr_dt_inputs_outputs.svg still shows the output from dtc being used,
but dtc is unused (except for finding warnings/errors) after the old
devicetree scripts were removed in commit c8c35f76ab ("scripts: dts:
Remove deprecated extract_dts_includes.py script").
Update zephyr_dt_inputs_outputs.svg to show how things are done now.
Also include the new zephyr.dts debugging aid in it. Tweak the
formatting a bit too.
Add zephyr.dts to the diagram in the build overview section too, and
mention zephyr.dts in the text of the devicetree and build overview
pages.
Remove zephyr_dt_inputs_outputs.png and use zephyr_dt_inputs_outputs.svg
directly. Many other places the documentation include SVGs directly, and
there haven't been any complaints, so it probably works fine. The .png
and .svg versions had also drifted out of sync.
Piggyback a link from the devicetree page to the build overview page, to
make it easier to discover.
(I used draw.io to update the diagrams.)
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Added record for describing change of write-block-size
to 32-bits introduced by #19720.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
There are various situations where it's necessary to support turning
devices on or off at runtime, includin power rails, clocks, other
peripherals, and binary device power management. The complexity of
properly managing multiple consumers of a device in a multithreaded
system suggests that a shared implementation is desirable. This
commit provides an API that supports managing on-off resources.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Use f-strings instead of .format() to make the code easier to read,
especially for long multiline strings.
f-strings were added in Python 3.6, which Zephyr requires now.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Define a minimal set of attributes that can be used to indicate the
allowed context for invoking specific Zephyr API and kernel functions,
and the effect of invoking them on thread and other behavior.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This term needs to be defined to support documenting the effect of
various API calls on scheduler selection of the running thread.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
I think a lot of the confusion with promptless symbols being assigned
might come from opening zephyr/.config, seeing that it assigns a bunch
of promptless symbols, and assuming that Kconfig must respect those
assignments, even though it doesn't.
Explain why zephyr/.config assigns promptless symbols (it's because it
doubles as configuration output). That should clarify things a bit.
Also mention what "invisible" means for symbols early on in the page.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Introduce the CMake variable SYSCALL_INCLUDE_DIRS to support
out-of-tree syscall declarations.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Diagram and text improvements:
- Redraw the configuration phase diagram to better reflect the actual
logic. Remove some misleading arrows, like from devicetree.h to
Kconfig. Kconfig uses the devicetree scripts directly.
- After the old devicetree scripts were removed in commit c8c35f76ab
("scripts: dts: Remove deprecated extract_dts_includes.py script"),
the dtc compiler is only run to catch any high-level warnings and
errors from it. The output is unused.
Update the diagram and descriptions to explain how dtc is used.
- Mention kconfigfunctions.py and explain better how devicetree and
Kconfig interact
- Clarify that 'cpp' is the C preprocessor. People often confuse it
with C++.
- Fix a typo'd devicetree_fixups.h in the text
- Use the :file: role for files instead of italic text
- Add links to the devicetree and Kconfig sections of the manual, and
use the :zephyr_file: role to turn more files into direct links
- Make the text generic re. Make vs. Ninja
- Lots of other minor tweaks and clarifications
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Patch introduce references to LittleFS instead of NFFS where it
was suitable. In other places NFFS mentions were removed
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Gerson Fernando Budke missed the Documentation Generation page. Nice to
link to it from the Documentation Guidelines page, in case people are
looking for documentation information and find it first.
Maybe the two pages could be put under a common Documentation section
too, though it's nice to have Documentation Generation clearly visible
in the top-level User Guides index.
Co-authored-by: Gerson Fernando Budke <nandojve@gmail.com>
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
List Documentation Guidelines right after Documentation Generation in
the index for User and Developer Guides. Makes it easier to spot.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
`TLS_PEER_VERIFY` and `TLS_DTLS_ROLE` options accept specific values,
yet no symbols were defined for them. In result, magic numbers were used
in several places, making the code less readable.
Fix this issue, by adding the missing symbols to the `socket.h` header,
and using them in places where related socket options are set.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The SoC, driver, and board support for the CC2650 and CC2650 Sensortag
aren't currently supported and we are removing them as such. If anyone
is interesting in supporting this platform we can easily recovery it
from git.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
generated_dts_board.h is pretty redundant and confusing as a name. Call
it devicetree.h instead.
dts.h would be another option, but DTS stands for "devicetree source"
and is the source code format, so it's a bit confusing too.
The replacement was done by grepping for 'generated_dts_board' and
'GENERATED_DTS_BOARD'.
Two build diagram and input-output SVG files were updated as well, along
with misc. documentation.
hal_ti, mcuboot, and ci-tools updates are included too, in the west.yml
update.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
HAS_SEGGER_RTT is assigned by various Nordic boards, but assignments
have no effect on promptless symbols. This symbol is enabled through
being select'ed by SOC_SERIES_NRF52X.
Holyiot, nRF52833-PCA10100, nRF52840-PCA10056, and nRF52-PCA10040 only
assign HAS_SEGGER_RTT without assigning USE_SEGGER_RTT. They probably
meant to enable USE_SEGGER_RTT, so do that instead.
Also add a help text to HAS_SEGGER_RTT and a warning re. HAS_SEGGER_RTT
vs. USE_SEGGER_RTT to the documentation.
Flagged by https://github.com/zephyrproject-rtos/zephyr/pull/20742.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Encoding of values with use of base64 has been marked as deprecated and
will be removed in future releases.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
'title:' was deprecated in commit 2934ee2cda ("dts: bindings: Remove
'title:' and put all info. into 'description:'"). Overlooked leftover.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Unused after the old devicescript were removed in commit c8c35f76ab
("scripts: dts: Remove deprecated extract_dts_includes.py script"). The
old scripts relied on parsing the output of 'dts -Odts', which replaces
e.g. phandle references. The new scripts parse the DTS files directly.
Keep running the dtc compiler just to catch any warnings/errors from it.
The edit to doc/guides/build/build-config-phase.svg is to remove the box
with '*.dts_compiled' in it (and the arrows to/from it). https://draw.io
can be used to edit it.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Rewrite most of the 'Input and output files' section to add more details
and implementation notes, and to make some description more more
concrete:
- Mention dtlib, edtlib, and gen_defines.py, and explain what they do
- Add an example of how macros get generated from the devicetree, and
explain the DT_<node>_<property> format of the generated identifiers.
Merge the 'Include files generation' section into the 'Input and
output files' section at the same time.
- Explain that the base devicetree and the overlays just get
concatenated, and why this works
- Add more details on how dts_fixup.h files work
- Mention that the C dtc compiler is only run to catch errors and
warnings from it
- Mention that the concatenated devicetree appears in
zephyr/<BOARD>.dts.pre.tmp
- Mention /include/, which is the native DTS mechanism for including
other files
- Misc. other minor tweaks
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Turn the CONFIG_* identifiers in the /chosen table into links to the
Kconfig reference.
Also explain why devicetree information doesn't show up in the Kconfig
reference.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
It's cryptic that some identifiers for devicetree-related stuff start
with DT_*, while others start with CONFIG_*. Explain what's going on,
and link to the Kconfig preprocessor documentation.
Also remove an early mention of bindings that might be confusing.
Bindings are much more about checking devicetree conformance than about
controlling output, though they do some of that too.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Not all /chosen properties were documented. Add the missing ones along
with the macros generated for them.
Found with some grepping for '\<zephyr,.*='.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The *_ON_DEV_NAME macros generated from /chosen properties changed
prefix from DT_* to CONFIG_* in commit 8ce0cf0126 ("kconfig: Convert
device tree chosen properties to new kconfigfunctions"), but the
devicetree documentation still lists the old names. Update the
documentation with the correct anmes.
Also remove an outdated reference to
DT_SRAM_SIZE/DT_SRAM_BASE_REFERENCE, and give a complete list of
generated macros.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Add a simple documentation section for the Zero-Latency
IRQs feature supported by the kernel.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Document that the Dynamic Direct interrupts feature is
implemented and supported as an ARM-only API.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
When building with Kconfig a symbol CONFIG_FOO is either undefined, or
defined to the integer literal 1. There are styles and use cases
where this is important, e.g. using "#if (CONFIG_FOO - 0)" which would
not work with a macro expanding to the identifier y. Use the standard
default definition instead of a special non-default one.
Also consistently use space rather than tab indentation within the
multi-line setting, and alphabetize the CONFIG_ predefines.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The original implementation left this function hidden in init.h which
prevented it from showing up in documentation. Move it to kernel.h,
and document it consistent with the other functions that allow caller
customization based on context.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
We have a collection of python scripts that are part of our build
system. This PR collects docstring comments added to these scripts into
a summary document. Previous references to just the script name in
other documentation are updated to point to this build tool
documentation.
Some of the scripts needed an update to be processed (via include
directives) consistently.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
It is actually possible to use several shields in the same project.
Reflect it in the shields documentation.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Make remote features and remote version accesible to the application
through the bt_conn_get_remote_info object. The host will auto initiate
the procedures. If the procedures have not finished with the application
calls bt_conn_get_remote_info then EBUSY will be returned.
The procedures should finish during the first 10 connection intervals.
Signed-off-by: Sverre Storvold <Sverre.Storvold@nordicsemi.no>
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Update Kconfiglib to upstream revision 9c0b562c94 to get this commit in:
Add Kconfig.__init__() helper flag for suppressing tracebacks
Tools that don't use standard_kconfig() currently generate spammy
tracebacks for e.g. syntax errors.
Add a suppress_traceback flag to Kconfig.__init__() for catching
"expected" exceptions and printing them to stderr and exiting with
status 1. Use it to make all tools consistently hide tracebacks.
Use the new flag to hide tracebacks for expected exceptions in
kconfig.py, lint.py, and genrest.py.
Some menuconfig robustness tweaks for wonky terminals are included as
well, and a new feature for customizing .config and autoconf.h header
comments via environment variables.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Allow '.. <figure/include/image/...>:: <path>' to appear anywhere within
a line, and find multiple directives on a single line. This is needed to
find files included e.g. within tables.
Implemented by making the <path> part of the regex more specific and
searching for matches anywhere within the contents of the file. Should
be a bit faster too.
Maybe there's some tiny potential for false positives, but this
generates the same file list as the old version for the current docs at
least.
Fixes: #21466
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Before introducing the code for ARM64 (AArch64) we need to relocate the
current ARM code to a new AArch32 sub-directory. For now we can assume
that no code is shared between ARM and ARM64.
There are no functional changes. The code is moved to the new location
and the file paths are fixed to reflect this change.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
All docs are treated equally in the search results. The built-in search
system knows to emphasize hits in titles and object names, but could use
some help understating hits in non-definitive docs. In particular, hits
to docs in the /boards, /samples, and /reference/kconfig docs are often
not as important as hits in other docs, so let's push them later in the
search result output.
We can tweak the search results scoring (and thereby the order of
display) via the ``html_search_scorer`` setting in ``conf.py`` along
with a piece of JavaScript to adjust the result score.
Fixes: #16935
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
I keep mixing these up, so that's probably a sign that the names are
bad. The root of the problem is that "parent-bus" can be read as both
"this is the parent bus" and as "the parent bus is this".
Use 'bus:' for the bus "provider" and 'on-bus:' for nodes on the bus
instead, which is less confusing.
Support the old keys for backwards compatibility, along with a
deprecation warning.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Explain a common subtle Kconfig gotcha where it might appear that
symbols with prompts are incorrectly "stuck" to a particular value in
the menuconfig interface. I've seen it come up several times now, e.g.
in the discussion that lead to
https://github.com/zephyrproject-rtos/zephyr/pull/20702. I also suspect
it's what's causing
https://github.com/zephyrproject-rtos/zephyr/issues/20673.
Also give suggestions for how to make things behave as intended.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Add information about the minimum Python version to the advanced Linux
documentation.
Drop 16.04 from the GSG since its system Python 3 is no longer covered
by these instructions.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This commit complements documentation of Zephyr HCI VS
commands. In particular, it documents the newly introduced
commands
- BT_HCI_OP_VS_WRITE_TX_POWER_LEVEL
- BT_HCI_OP_VS_READ_TX_POWER_LEVEL
These provide HCI-level control over the Tx power of the
BLE radio on a per role/connection basis.
The functionality is enabled upon the Kconfig advanced configuration
triggered by
- BT_CTLR_TX_PWR_DYNAMIC_CONTROL
depending on the enablement of Zephyr HCI vendor-specific command
extensions.
Signed-off-by: Andrei Stoica <stoica.razvan.andrei@gmail.com>
Document how to configure out-of-tree tests/samples and boards in the
module.yml file to be used by sanitycheck.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Commit 27e5dd13 fixed a bunch of uses of "device tree" in the
documentation, but accidentally hit the part of the documentation
that stated that "devicetree" should be preferred over "device tree".
Signed-off-by: Josh Gao <josh@jmgao.dev>
Clean up and update release tagging procedures. Use new
document tabs to separate instructions for release
candidate and final releases.
Signed-off-by: David Leach <david.leach@nxp.com>
The numbered list for installing toolchains on macOS and Windows is not
formatted correctly.
Signed-off-by: Piotr Zierhoffer <pzierhoffer@antmicro.com>
In order to make technical progress possible, some stable APIs
may sometimes need to be modified in a non backwards-compatible way.
Describe the process for integrating such changes in the documentation.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add the relevant sections for Stable API Changes so that the release
notes can be populated during development.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add an option --separate-all-index that makes genrest.py generate a
separate index-all.rst index page that lists all symbols, instead of
listing all symbols in index.rst. index-all.rst is linked from
index.rst.
This was originally motivated by an external project where index.rst
becomes the top-level page, which runs into a Sphinx bottleneck with
sphinx_rtd_theme. See https://github.com/sphinx-doc/sphinx/issues/6909.
This turned out pretty nice after some feedback from Ruth Fuchss, so use
it for Zephyr too.
Also unclutter the generated documentation a bit by removing some
headings. This makes the navigation menu on the left nicer too.
Piggyback making genrest.py executable, which is handy when running it
manually.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Remove leading/trailing blank lines in .c, .h, .py, .rst, .yml, and
.yaml files.
Will avoid failures with the new CI test in
https://github.com/zephyrproject-rtos/ci-tools/pull/112, though it only
checks changed files.
Move the 'target-notes' target in boards/xtensa/odroid_go/doc/index.rst
to get rid of the trailing blank line there. It was probably misplaced.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Some incorrect indenting in the doc was causing numbered lists to reset
back to 1 instead of continuing the series.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
This option, if set, will add arguments to CMake whenever a new build
system is being generated.
It doesn't affect other invocations of CMake, such as when cmake(1) is
run in build tool mode to actually compile the application.
See the documentation changes for details.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
There is no code to handle __syscall_inline so it is better removing
it from doxygen and checkpatch.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Put a short Kconfig overview on the index page that links to the other
Kconfig documentation.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Add a new 'Setting Kconfig configuration values' page in the new Kconfig
section in 'User and Developer Guides'. Move all the information on
setting Kconfig symbols from 'Application Development' and the board
porting guide into it. The same page now covers both configuration files
and Kconfig.defconfig files.
Add links to the new page in various places to make it easy to find.
Also add some more references to the top-level Kconfig page and other
Kconfig pages.
A lot of stuff was rewritten while moving it over (the CONF_FILE
documentation has been cleaned up in particular). Some new information
has been added as well, like a tip re. minimal configurations being
helpful when making Kconfig settings permanent, and a warning re.
dependencies being ORed rather than ANDed when defining a symbol in
multiple locations.
Fixes: #20915
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The SOC Definitions section had backslashes before * in globbing
'source's.
Also change the language for the code block from 'console' to 'none'.
Kconfig isn't shell.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Move the documentation for the menuconfig and guiconfig interfaces from
Application Development to a new Interactive Kconfig Interfaces page in
User and Developer Guides.
Also tweak Application Development to mention the configuration
interfaces earlier. It's good to encourage people to try things out in
menuconfig, because dependencies often get lost when people seldom run
it and just hand-edit files.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The Kconfiglib Kconfig extensions are documented in the porting guide,
which is a pretty weird place to document them. Document them under a
new page in the Kconfig section of User and Developer Guides instead.
Also remove the section about the old Zephyr Kconfig behavior for
defaults (tried last-to-first instead of first-to-last). The behavior
was changed 16 months ago (and was undocumented before that), so it
might not be that useful to mention anymore.
Piggyback misc. small language cleanups and organization nits.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Touch up the Kconfig preprocessor function documentation a bit and add
some more details to the example. Use the Kconfig preprocessor call
syntax instead of Python syntax in the function synopses.
Also move the preprocessor docs to a separate page, and add a top-level
Kconfig section to User and Developer Guides that links to the Kconfig
tips page and the preprocessor page.
Trying to avoid the Kconfig tips page becoming a dumping ground for
random Kconfig documentation.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Using ':' as the separator in --modules breaks module specifications
like
nrfxlib:nrfxlib:C:/Users/Carles/src/ncs/nrfxlib
The ':' in 'C:' gets seen as a separator.
Use ',' instead, which is unlikely to appear in paths (at least in
--modules). Treat a doubled ',,' as a literal ','.
Another option would be ';', but it clashes with how CMake represents
lists, which is awkward.
Also make quoting of arguments with spaces more robust by passing
VERBATIM to add_custom_target().
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Fix misspellings in docs (and Kconfig and headers processed into docs)
missed during regular reviews.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The network sample automatic testing feature in PR #19677 is moved
to 2.2 so removing it from 2.1 release note.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of showing the prompt for symbols on the index page, show their
help texts. This makes searching easier.
Fall back on the prompt if no help text is available.
Also change the code to only show one of the prompts if several are
available (happens if a symbol is defined in multiple locations and adds
a prompt in more than one of them). It's probably overkill to show them
all, and it doesn't come up that often.
Suggested by David B. Kinder.
Co-authored-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Use --modules to split the Kconfig reference up by where symbols are
defined. See the argparse docstring for --modules in
doc/scripts/genrest.py.
Not sure what the best way to split things up is, so feedback would be
appreciated. I just pulled out some top-level directories. It could
always be tweaked later.
If a symbol is defined in more than one module (by being defined in
multiple locations), it appears on multiple index pages.
To build the documentation, do
$ mkdir doc/b && cd doc/b
$ cmake -GNinja ..
$ ninja htmldocs
(output in html/reference/kconfig/index.html)
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Instead of having index.rst just link to other index pages in --modules
mode, list all symbols on it, and have links to the module index pages
at the top.
Get rid of index-all.rst and index-main.rst (and all related options).
index-all.rst is no longer needed, and index-main.rst (symbols outside
--modules) might not be that useful to people reading the documentation
(and could be added back if needed).
Also refactor and streamline the code a bunch. For the main index page,
the only difference between modules and non-modules mode is now whether
there's links to other index pages at the top.
Suggested by David B. Kinder.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Documents major driver changes (additions, removals, fixes, etc.) across
all driver families since the 2.0.0 release.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Additions:
- Provide clear description of a typical board port on zephyr
- Add a clear statement that peripherals should be disabled by
default (unless clearly specified)
- Add clear mentions on peripheral that should actually be enabled
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add a note about supporting new SoC Series in v2.1.0 release.
Style rework in the section for SoC support.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Adds a deeper hierarchy to the Bluetooth Mesh documentation by moving
the modules in separate pages with a brief description of the concepts
in each module.
Adds the full list of specification defined Health model faults.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
We've added some new capabilities for documentation writers such as the
tabbed interface and numbered instruction steps, as used in the updated
Getting Started Guide.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Adding a release notes section for the ARM Cortex-M
architecture, to be part of the Zephyr v2.1.0 release notes.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Noticed that <p> within a responsive table (as found in the kconfig docs
generated by the new genrest.py script in PR #20322) weren't displaying
using the same font size as table cells without <p> content. This
situation occurs when the help text in the Kconfig file is more than one
paragraph.
Also added a comment explaining why a previous CSS tweak was added.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
In getting started, in case of macOS and Windows, the need to set
zephyr specific environment variables is only specified several links
away from the getting started, which can be easily missed for someone
who already has the toolchain installed. So just remind the user.
Signed-off-by: Laurent Meunier <laurent.meunier@st.com>
All states in the thread state diagram were initial-cap except
"suspended". Make it Suspended for consistency.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The discard report is now generated for every run as
sanity-out/sanitycheck_discard.csv, the option --discard-report was
dropped.
Fixes#20804
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Removed some cut/paste from mynewt with references to os_callout,
os_event in example snippets.
code examples were also aligned to current settings handle API.
fixes#20743
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
A detailed overview of Zephyr's build system. This is a
thorough view of the low level build process starting from CMake and
using Make as the build system tool. Things missing here that will be
further documented:
- west
- external modules/libraries
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Add a simple block diagram detailing the SMP initialization flow. Not
pretty, but hopefully reasonable.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Documentation about scheduling options was burried in the Kconfig help.
It has better visibility as part of the scheduling section of the main
kernel reference pages.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
One shows how globals are routed for automatic memory
domains. The other illustrates control flow when making
system calls.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
As presented to the TSC, Zephyr's out-of-box experience for new
developers is, well, complicated. A number of suggestions were
presented including simplifying the getting started material to present
a straight-forward path through the setup and installation steps through
to getting a sample application built, flashed, and running.
This PR is a work-in-progress towards addressing this OOB experience
with a minimal-distractions version of the GSG. Alternatives, warnings,
and material that could lead the developer astray were moved to
alternative/advanced instruction documents (based on the previous
separate Linux/macOS/Windows setup guides) and a new "Beyond the GSG"
document.
We do take advantage of a sphinx-tabs extension for synchronized tabs to
present OS-specific instructions: clicking on one tab will display all
same-named tabs throughout the doc.
We hope (and will continue evaluating) that this new GSG gets developers
set up quickly and then we can send them along to other documents to
continue learning about Zephyr and trying other sample apps.
Thanks for all your previous feedback that I've worked
into this new version.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
In order to use clang it is necessary to set the variable
ZEPHYR_TOOLCHAIN_VARIANT to llvm instead of clang.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The mimxrt10{20,60,64}_evk board docs were renamed from <board>.rst to
index.rst in commit 0e4ff809d7 but were
missing entries in the html redirect list. Add them.
An entry for mimxrt1015_evk is not added because this board always had
an index.rst board doc.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Need to add the kernel_arch_interface.h header here
to match zephyr.doxyfile.in.
This is the header which contains the formal kernel-to-
architecture interface and we want docs generated for it.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Mark the old time conversion APIs deprecated, leave compatibility
macros in place, and replace all usage with the new API.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Promote the private z_arch_* namespace, which specifies
the interface between the core kernel and the
architecture code, to a new top-level namespace named
arch_*.
This allows our documentation generation to create
online documentation for this set of interfaces,
and this set of interfaces is worth treating in a
more formal way anyway.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The board area was renamed from riscv32 to riscv back in July to
accommodate riscv64 support. Fix the remaining references in
documentation.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Adds the model extension concept to the access layer, as described in
the Mesh Profile Specification, Section 2.3.6. Extensions are
implemented as a tree, using two pointers in each model:
The extends pointer points to the first extended model, and the next
pointer points to the next sibling or (if the NEXT_IS_PARENT flag is
set) the parent model in the tree, forming a cyclical "Left-child
right-sibling" (LCRS) tree. The tree root can be obtained by calling
bt_mesh_model_root_get(), and the extended models can be walked by
calling bt_mesh_model_tree_walk().
According to the Mesh Profile Specification Section 4.2.3, all models in
the same extension tree share one subscription list per element. This is
implemented by walking the model's extension tree, and pooling the
subscription lists of all models in the same element into one. If the
config server adds a subscription to a model, it may be stored in any of
the model tree's models' subscription lists. No two models in the same
extension tree and element will have duplicate groups listed. This
allows us to increase extended models' capacity for subscriptions
significantly.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Note that generated_dts_board.conf is now deprecated and that users
should utilize functions to access DT related information that was
coming from generated_dts_board.conf.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add a cleaned-up version of a script I used to find a bunch of unused
symbols and some other Kconfig issues. It's set up to be run directly,
with few environment dependencies.
West is required, because the checks need to see Kconfig files and
source code from all modules.
Checks so far:
- Symbols that can never be anything but n/empty
- Symbols that look unused
- menuconfig symbols with empty menus
- Symbols only defined in Kconfig.defconfig files
See the help strings for the command-line flags for more information.
Some of these checks could probably be checked in CI later, though the
always-n and unused-symbol checks are a bit heuristic and might need a
lot of whitelisting.
Another reason I want to get this in is to have a clean standalone
reference for how to set up the environment for parsing the Kconfig
files. It's gotten trickier over time.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
We need to pass system call args using a register-width
data type and not hard-code this to u32_t.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
1) Add cryptographically secure random functions to provide
FIPS 140-2 compliant random functions.
2) Add name to random function choice selectors to ease
selection in SOC .defconfig files
3) Add bulk fill random functions.
Signed-off-by: David Leach <david.leach@nxp.com>
This commit allows a more dynamic approach for specifying that a zephyr
library must be placed in a dedicated app memomory partition.
This is still done by defining the partition in code using
K_APPMEM_PARTITION_DEFINE, but now the zephyr library can be added to
the generation of partition table using zephyr_library_app_memory
instead of modifying the overall zephyr/CMakeLists.txt file.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Settings documentation was placed under storage paragraph
in documentation tree, which suggested that it was another
storage solution. In fact settings uses storage modules as
its persistent storage back-end.
This patch creates dedicated run-time configuration paragraph
which aim to explain existence (and emphasize) of common run-time
configuration system in Zephyr-RTOS and rationale for using it.
The Settings paragraph is placed under this paragraph as it is only
sub-module which implements the solution.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Add function that will return 'y' or 'n' if a node pointed to by a
chosen property exists and is enabled.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
There are two set of code supporting x86_64: x86_64 using x32 ABI,
and x86 long mode, and this consolidates both into one x86_64
architecture and SoC supporting truly 64-bit mode.
() Removes the x86_64:x32 architecture and SoC, and replaces
them with the existing x86 long mode arch and SoC.
() Replace qemu_x86_64 with qemu_x86_long as qemu_x86_64.
() Updates samples and tests to remove reference to
qemu_x86_long.
() Renames CONFIG_X86_LONGMODE to CONFIG_X86_64.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This generic video API can be used to capture/output video frames.
Once a video buffer is enqueued to a video device endpoint, device owns
the buffer and can process to capture (camera), output (disk, display),
convert (hw encoder)... User can then call dequeue to retrieve
the processed buffer (video driver ensure cache coherency).
Once dequeued, video buffer is owned by user (e.g. for frame
processing, display buffer update, write to media, etc...).
For each video-buffer, user needs allocate the associated frame buffer
via video_buffer_alloc. Buffer format is defined by video device
endpoint configuration. Video device can be controlled (e.g. contrast,
brightness, flip...) via controls.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Add documentation for the Websocket API, also add information how
to use the Websocket as a transport for other high level protocols
like MQTT.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove the documentation that incorrectly says that DT uses
Kconfig. DT no longer has access to Kconfig symbols.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Remove the common.dts file which has been used for a year.
common.dts at one point allowed us to conditionally add an MCUBoot
overlay based on Kconfig.
but since DT lost access to Kconfig options it has been unused.
The overridable variable DTS_COMMON_OVERLAYS, which by default points
to common.dts, is also unused in-tree, and any out-of-tree usage can
be ported over to use DTC_OVERLAY_FILE instead, so we remove the
variable as well.
This simplifies the configuration system.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Replace:
dt_chosen_reg_addr
dt_chosen_reg_size
dt_node_reg_addr
dt_node_reg_size
with:
dt_chosen_reg_addr_int
dt_chosen_reg_size_int
dt_chosen_reg_addr_hex
dt_chosen_reg_size_hex
dt_node_reg_addr_int
dt_node_reg_size_int
dt_node_reg_addr_hex
dt_node_reg_size_hex
So that we get the proper formatted string for the type of symbol.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Some of this information is stale and needs to be fixed.
Try to make a few other things clearer while we're here.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Flash page layout API was omitted by documentation as it
is optional.
Added tag which turn it on to doxygen setup which allows
to include missing API documentation.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Links to doxygen-generated API content are displayed as monospaced code
spans in the text, but have no indication that they're are clickable
links. Tweak the CSS to color the monospaced text the same as regular
links in the text (blue) and after visited (purple). This might also
help us notice doxygen API references that aren't creating links (and
should).
Fixes: #20032
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Update conf.py to add the v1.14.1 release docs to the master docs
version pick list, and remove the original v1.14.0.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Document why and how we use the devicetree nexus map properties to
preserve devicetree flag specifications.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Paths like soc//arm/... showed up in the output due to the extra '/' at
the end of the SOC_DIR value. Remove the redundant '/' in SOC_DIR and
other environment variables that get referenced in the Kconfig files.
Kconfiglib never normalizes paths, because it avoids some gotchas, e.g.
with symlinks.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Clarify the roles and responsibilities of the Zephyr community
and contributors with respect to PRs, Bugs, and Features.
Signed-off-by: David Leach <david.leach@nxp.com>
Extend the specifications passed to --modules to add the form
<title>:<suffix>:<path>:<index description filename>
<index description filename> points to a file that contains RST that is
inserted at the top of the index page.
If no filename is passed, the old default description is used.
Also add three flags --top-index-desc, --non-module-index-desc, and
--all-index-desc for customizing the text at the top of non-module index
pages.
This functionality is currently unused in Zephyr, but will probably be
used later. It's being added for a downstream project.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This commit updates the settings backend documentation
to clearly state that it cannot provide old entities
before the final one.
Signed-off-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
Add a --modules flag to genrest.py for generating separate index pages
for symbols defined within certain paths.
Passing
--modules Shell🐚subsys/shell Storage:storage:subsys/storage
will generate these index pages, instead of a single index.rst file:
- index-shell.rst: Lists the symbols defined in subsys/shell
- index-storage.rst: Lists the symbols defined in subsys/storage
- index-main.rst: Lists all symbols that are not in subsys/shell or
subsys/storage
- index-all.rst: Lists all symbols
- index.rst: Contains links to the other index pages
The string before the first ':' ('Shell' and 'Storage' above) is used
when generating the title of the index page. 'Shell' gives
'Shell Configuration Options', for example.
The title for index-main.rst can be set by passing
'--non-module-title <title>'. It defaults to "Zephyr".
By default, paths in symbol information pages that are within modules
are shown as '<title>/<path relative to module>'. This can be disabled
by passing --keep-module-paths.
--keep-module-paths would make sense for the example above, but
stripping the path to the module is nice when dealing with modules
defined outside the Zephyr repository.
If a symbol is defined in multiple modules (or both in a module and
outside all modules), it will appear on multiple index pages.
This commit also simplifies how genrest.py is called a bit, making the
Kconfig filename optional (default: Kconfig).
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
For a long time, release notes were titled "Zephyr Kernel x.x.x". With
the 2.0 release the title was changed to "Zephyr RTOS 2.0.0" and for the
1.14.1 update the title was "Zephyr 1.14.1" and for the 2.1.0 working
draft the title went back to "Zephyr Kernel 2.1.0". The end result was
the release notes index looking like this:
Zephyr Kernel 2.1.0 (Working Draft)
Zephyr RTOS 2.0.0
Zephyr 1.14.1
Zephyr Kernel 1.14.0
Zephyr Kernel 1.13.0
Zephyr Kernel 1.12.0
Zephyr Kernel 1.11.0
I think the intention was to drop the "Kernel" name (since the release
is more than a kernel), so let's make the release notes titles
consistent by calling post 1.14.0 release notes "Zephyr x.x.x"
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
found some references to files (via :zephyr_file: and :zephyr-app:) that
were moved, so the links were broken
Fixes: #19660
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
DTSpec writes this as a single word, presumably to make it easier to
grep for / more precise. Follow along in the rest of the docs now that
our main DT docs page agrees with this usage.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
The K6X example is part of the wrong subsection (devicetree vs
kconfig) currently. Move it up to the right place (the section which
was recently renamed to "input and output files")
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Re-work the introductory sections of the devicetree documentation,
adding several figures and cross-references to other useful parts of
the documentation.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Device tree overlays are a bit of a stumbling block. Try to add more
cross-references and examples for how to use them to the application
development doc and the west build page.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
It is now possible to override a shield variant configuration
for a specific board. Get it documented.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Shields subsystem provides the possibility to override configuration
for boards and to define variants.
Reflect this in documentation.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
SMP had API-level docs, but no architecture-level description.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Changed return parameter description from
"@retval filter id on success" to
"@retval filter_id on success".
This change suppresses the doxy warnings.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
This commit adds a lot more documentation to the Controller Area
Netwok API. The documentation is move to the networking section.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
This commit adds new k_work_poll interface. It allows to
submit given work to a workqueue automatically when one of the
watched pollable objects changes its state.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Give an example for an interrupt controller, where 'interrupt-cells'
should be used instead.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
PR #19493 cleaned up the turbo-mode process for doc generation but
introduced an error in the generated index.rst that causes use of the
"make htmldocs-fast" (so-called turbo mode) to fail with an error -
the generated list-table directive has no content (other than
the header row). This PR adds one dummy row.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Putting overlay files in the test/sample root clutters the file
system. Allow them to be in the boards subdirectory alongside
board.conf files.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
KCONFIG_TURBO_MODE being twisted up in the normal logic made the code
hard to follow and change.
Use a separate write_dummy_index() function for KCONFIG_TURBO_MODE
instead, and add more documentation for it. Also get rid of options.rst
and just write all the symbol link targets directly to the dummy index
file, which is a bit simpler.
As a small piggybacked improvement for default values, make the heading
'default' instead of 'defaults' when there's only one. The menuconfigs
do this too.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
k_cpu_idle() and k_cpu_atomic_idle() were being directly
implemented by arch code.
Rename these implementations to z_arch_cpu_idle() and
z_arch_cpu_atomic_idle(), and call them from new inline
function definitions in kernel.h.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
A few new contributors, after reading the uncrustify section
of the contribution guidelines, have decided to run
existing Zephyr files thru uncrustify, and include in commits
with minor fixes lots of styles changes.
This is something we do not want to encourage.
To avoid this, modify a bit the uncrustify section to
discourage people from doing just that.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Add diagram showing the current system power management and the central
method of device power management.
The diagrams were made using draw.io and can be edit using draw.io.y
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
This PR adds the possibility to specify ZEPHYR_EXTRA_MODULES from an
environmental variable. To add a custom module mymodule in
path/mymodule the variable ZEPHYR_EXTRA_MODULES can be set in
`.zephyrrc` as `export ZEPHYR_EXTRA_MODULES=path/mymodule`.
Signed-off-by: Laczen JMS <laczenjms@gmail.com>
Moving all thread docs into 1 page was a bit too much. Split the section
a bit and remove redundant and useless sections and move some thread
related documentation from the scheduling page to threads (thread states
and priorities).
Add a new figure for thread states.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Added CONIFG_LOG_BLOCK_IN_THREAD option to block until buffer for
log message is available. When log message is called in the thread
and there is no buffer available in the pool, thread will block with
configurable timeout (CONFIG_LOG_BLOCK_IN_THREAD_TIMEOUT_MS). If
buffer cannot be allocated by that time, message will be dropped.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
We don't really have docs on how fatal errors are induced
or handled. Provide some documentation that covers:
- Assertions (runtime and build)
- Kernel panic and oops conditions
- Stack overflows
- Other exceptions
- Exception handling policy
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Remove ctf_middle layer and have only ctf_top and ctf_bottom.
Port functionality from ctf_middle to ctf_top and remove
ctf_middle.h file. Update associated documentation.
Signed-off-by: Mrinal Sen <msen@oticon.com>
Added in 2.0, along with some binding format simplifications in 2.1.
Bunch of other stuff that could be mentioned, but keep it relatively
short.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Use globbing to find release notes and display them in the expected
reverse-sorted order (newest release first). Some trickery is needed
because were not using two-digit version/subversion numbers so the list
won't sort naturally. This will eliminate the need to edit the index
page on every release, until we get to subversion 10.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
While the two-column layout looked OK in the HTML output, it totally
broke the PDF version of the documentation. So, this change puts the
picture before the text instead of using embedded raw html tags to
create a two-column look. (And fixes the PDF generated output.)
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
For long lists of items, it's better to use a multi-column display to
make better use of the screen space. We used the hlist directive to
accomplish list, but it has a drawback on small (phone) screens because
under the hood, the rendering is done using tables.
Instead, we can take advantage of built-in CSS multi-column support
available in recent browsers. So, convert uses of the hlist directive
to use an rst-class directive to apply a multi-column class to
the entity. The chosen column-width (18em) gives us a 3-column display
on typical window sizes, but will adjust to more or fewer columns
depending on the actual real estate available.
Also, update the documentation guidelines to mention this change.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
A Kconfig boolean is added to allow users to provide their own
output strings when running tests via ztest.
This allows changing e.g. the PASS/FAIL/SKIPPED strings,
add counters, change separators, and similar.
A test using the feature and relevant documentation is added.
Signed-off-by: Torstein Grindvik <torstein.grindvik@nordicsemi.no>
We now more throroughly discuss memory domains, thread
resource pools, and automatic memory domains.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
System call arguments, at the arch layer, are single words. So
passing wider values requires splitting them into two registers at
call time. This gets even more complicated for values (e.g
k_timeout_t) that may have different sizes depending on configuration.
This patch adds a feature to gen_syscalls.py to detect functions with
wide arguments and automatically generates code to split/unsplit them.
Unfortunately the current scheme of Z_SYSCALL_DECLARE_* macros won't
work with functions like this, because for N arguments (our current
maximum N is 10) there are 2^N possible configurations of argument
widths. So this generates the complete functions for each handler and
wrapper, effectively doing in python what was originally done in the
preprocessor.
Another complexity is that traditional the z_hdlr_*() function for a
system call has taken the raw list of word arguments, which does not
work when some of those arguments must be 64 bit types. So instead of
using a single Z_SYSCALL_HANDLER macro, this splits the job of
z_hdlr_*() into two steps: An automatically-generated unmarshalling
function, z_mrsh_*(), which then calls a user-supplied verification
function z_vrfy_*(). The verification function is typesafe, and is a
simple C function with exactly the same argument and return signature
as the syscall impl function. It is also not responsible for
validating the pointers to the extra parameter array or a wide return
value, that code gets automatically generated.
This commit includes new vrfy/msrh handling for all syscalls invoked
during CI runs. Future commits will port the less testable code.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Fixes this pylint warning:
R0201: Method could be a function (no-self-use)
Another option would be to turn them into regular functions, but that'd
be a bigger change.
Fixing pylint warnings for a CI check.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Instead of
properties:
compatible:
constraint: "foo"
, just have
compatible: "foo"
at the top level of the binding.
For backwards compatibility, the old 'properties: compatible: ...' form
is still accepted for now, and is treated the same as a single-element
'compatible:'.
The old syntax was inspired by dt-schema (though it isn't
dt-schema-compatible), which is in turn a thin wrapper around
json-schema (the idea is to transform .dts files into YAML and then
verify them).
Maybe the idea was to gradually switch the syntax over to dt-schema and
then be able to use unmodified dt-schema bindings, but dt-schema is
really a different kind of tool (a completely standalone linter), and
works very differently from our stuff (see schemas/dt-core.yaml in the
dt-schema repo to get an idea of just how differently).
Better to keep it simple.
This commit also piggybacks some clarifications to the binding template
re. '#cells:'.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This fixes some typos. Also fix the meaning of a struct field
where the confusion caused by copy-and-paste from another
field.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Correctly set the separator as a semicolon on Windows when
constructing the PYTHONPATH environment variable so that CMake
doesn't intepret it and swallow it.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Get things started for Zephyr 2.1 release notes.
Individual PRs will update their appropriate sections.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
UnicodeDecodeError.object supports indexing, but pylint gets confused
for some reason.
doc/scripts/extract_content.py:70:16: E1136: Value 'e.object' is
unsubscriptable (unsubscriptable-object)
This warning is useful enough to want to have enabled in the upcoming
pylint CI check, so suppress it.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Getting slightly subjective, but fixes this pylint warning:
doc/extensions/zephyr/application.py:274:15: R1714: Consider merging
these comparisons with "in" to "goal in ('build', 'sign')"
(consider-using-in)
Use a set literal instead of a tuple literal, as recent Python 3
versions optimize set literals with constant keys nicely.
Getting rid of pylint warnings for a CI check. I could disable any
controversial ones (it's already a list of warnings to enable anyway).
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
dtlib.py and guiconfig.py do some hackery to build token and image
variable names, which triggers spurious pylint warnings like
scripts/dts/dtlib.py:243:28: E0602: Undefined variable '_T_LABEL'
(undefined-variable)
Suppress the warning for those files. The generated names get used in
lots of places.
Also suppress some warnings in doc/conf.py ('tags' is from Sphinx), and
fix a legitimate issue in scripts/dts/testdtlib.py.
This pylint check is useful enough to want enabled in the upcoming CI
check.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
A bare 'except:' can do some annoying stuff like eat Ctrl-C (because it
catches KeyboardInterrupt). Better to use 'except Exception:' as a
catch-all.
Even better might be to catch some more specific exception, because even
'except Exception:' eats stuff like misspelled identifiers.
Fixes this pylint warning:
doc/conf.py:99:0: W0702: No exception type(s) specified
(bare-except)
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Reported by pylint's 'bad-whitespace' warning.
Not gonna enable this warning in the CI check, because it flags stuff
like deliberately aligning assignments and gets too cultish. Just a
cleanup pass.
For whatever reason, the common convention in Python is to skip spaces
around '=' when passing keyword arguments and giving default arguments:
f(x=3, y=4)
def f(x, y=8):
...
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
ext/fs/fat and ext/hal/nordic were moved out of the ext folder and into
external modules so we should remove the licensing exceptions noted in
this document.
kconfig and kbuild were removed from the zephyr repo too.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Zephyr is more than a kernel, so we update the title of
the release notes' section accordingly.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The project's README.rst references the support board docs with an URL
that's not working these days (see
https://github.com/zephyrproject-rtos/infrastructure/issues/134) so fix
that URL reference. While looking for other similar linking cases, I
found a hard URL references that should be using :ref: role, and a
release notes reference to a (now) broken link (fixing that in the
/latest/ version of the 1.10 release notes).
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Do a review and editor pass on the release notes, reduce length of some
lists by using hlist extension, tweak css for appearance of hlist in a
bullet list. Update entries to be in past tense (Added vs. Add).
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Re-word the support block for LwM2M:
- the supported interfaces
- change wording of supported LwM2M objects to include the "required"
keyword instead of explicitly listing them
- mention several IPSO Smart Objects
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/16327
Signed-off-by: Michael Scott <mike@foundries.io>
Adding a note about new tests and expanded
test case list for 2.0.0 release notes.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The Next/Previous chapter buttons have been confusing in the past and
recent DX studies still show that folks read these as the "Next"
document to read in some defined order. These buttons are simply
another way to navigate through the document tree to the "Next" doc in
the table of contents. Let's remove these buttons (again).
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
While trying out the hello_world sample built for QEMU, I was expecting
the sample app to exit and I'd return to a command prompt. Nope. You
need to exit QEMU manually, so add that step to the sample instructions.
Looking around, there are more uses of QEMU like this that could use
this added step after running the sample app.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Not a whole ton to say at the high level: many of the changes have
been discussed in notes for drivers and other subsystems.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
There are a few non-PNG (JPEG and WebP) files that are being
name as PNG files. This causes pdflatex/latexmk to fail due
to them not actually being PNG files. So rename those files
with correct extensions and update the RST files.
Also converted the WebP file in JPEG as PDFLatex cannot parse
WebP image.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add a table summarizing the key characteristics of each
of the data passing objects.
It is useful for readers to have an overview they can skim without
having to read each section in detail.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Splitting these up by area helps make the sidebar a bit easier to
navigate, and will also let us insert additional overview information
about each area.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Add a summary of 2.0 doc changes, and fix a misspelling.
Also, add the 2.0 release notes to the index page.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Add a simple diagram on the device driver model.
Instead of saying "this device driver", spell out that the note
is for the random number generator driver, as the visual
presentation does not have clear distinction.
Also update some formatting.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
West v0.6.1 has been released. The main feature is that "west update"
now avoids communicating with the network by default when project
revisions have already been fetched.
This allows for offline operation and significantly speeds up the
command (it's 10 times faster on my machine and home network).
There are other miscellaneous changes as well; document them also.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
modernizr.min.js is causing unnecessary reloads of a page causing
flashing of the browser window during page load (most noticiable with
firefox). This empty script effectively wipes out the modernizr.min.js
unnecessarily loaded by the Sphinx rtd theme (see
https://github.com/readthedocs/sphinx_rtd_theme/issues/724)
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Instead of having a mix of west and CMake/ninja instructions for
building and flashing, document it using only west. This will help
clarify that west is the default build tool in Zephyr and should also
reduce confusion over what tool to use.
Note that the biggest change is changing the default in
doc/extensions/zephyr/application.py for :tool:, from all to west.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Documents generated for a tagged release have a header that mentions
that the "latest" (master branch) version of the doc may be more up to
date, but the link to the corresponding master doc is missing the
/latest/ (previously the master docs were in the root folder.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Fixes: #17764
Documents major driver changes (additions, removals, fixes, etc.) across
all driver families since the 1.14.0 release.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This PR updates the documentation to cover a technical solution to
providing a driver instance that extends the functionality of a
subsystem API. The solution described was mooted in Zephyr PR #17072
and approved by the Technical Steering Committee during its 2019-08-07
meeting.
Relates-to: #11993
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
When init level hierarchy was reworked the documentation was switched to
describe the new levels, but the count of relevant levels was not
changed.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Add comment for the setup failure.
The solution can be infered from ARMmbed/cmsis-pack-manager#97
Fixes#18269.
Signed-off-by: Chen Guokai <1415430544@qq.com>
Add information about supported protocols in PPP and link to
net-tools that contains information how to test ppp against
pppd running in Linux.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Get things started for Zephyr 2.0 release notes.
Individual teams will update their appropriate sections.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
west completion is an extension command, and therefore requires the user
to be in a zephyr installation in order to be available.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Code snippets show misleading example of read_callback usage
in h_set handlers.
This patch aligns snippets to implemented behavior.
fixes#15451
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
For users that have an older version of west already installed, it is
useful to include `-U` in the getting started guide, otherwise the
instructions will fail to work depending on the state of the machine.
Fixes#18132
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The old link seems not to work anymore, so instead replace it with an
invitation link freshly generated.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The main change is the elimination of the bootstrapper, a design flaw
/ misfeature.
Update the documentation to be compatible with the 0.6.x releases as
well. This has to be done atomically, as there were incompatible
changes. Make use of the versionchanged and versionadded directives
to begin keeping track of how these APIs are evolving.
(Note that west 0.6.0 will remain compatible with the extension
commands in Zephyr v1.14 LTS as long as that is still alive. This
change is targeted towards Zephyr 2.0 users.)
This requires a bump in the shippable container and allows us to
simplify the west_commands test procedure.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Now that the runners package no longer depends on west, we can move
the documentation for it from the orphan west-apis.rst page to the
build-flash-debug.rst page that documents the west extension commands
which use that package.
(This is a more logical place for this information, but it was
previously not possible to put it there since we must be able to build
the documentation on a system without west installed, excepting
content in west-apis.rst. Removing the dependency means the runners
automodule directive can safely appear in build-flash-debug.rst.)
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
It's been annoying that there was no convenient way to get back to the
documentation home page. There is a link in the breadcrumb trail at the
top of the page, but folks didn't notice that. This PR adds a
"Documentation Home" link at the top of the left-nav menu.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
With the upcoming riscv64 support, it is best to use "riscv" as the
subdirectory name and common symbols as riscv32 and riscv64 support
code is almost identical. Then later decide whether 32-bit or 64-bit
compilation is wanted.
Redirects for the web documentation are also included.
Then zephyrbot complained about this:
"
New files added that are not covered in CODEOWNERS:
dts/riscv/microsemi-miv.dtsi
dts/riscv/riscv32-fe310.dtsi
Please add one or more entries in the CODEOWNERS file to cover
those files
"
So I assigned them to those who created them. Feel free to readjust
as necessary.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
- Explain what it means to enable nodes (and for a node to be disabled)
with some sample code from the .dts(i) files
- Explain the '&foo { ... }' syntax
- Linkify files with :zephyr_path:
- Simplify and shorten wording a bit
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Add some information that would've saved me a lot of time:
- Give an overview of how device tree nodes and bindings fit together,
with examples. Assume people might be coming at it without knowing
anything about device tree.
- Explain how 'inherits' works in more detail
- Explain what 'parent/child: bus: ...' does more concretely, and what
problem it solves
- Add more examples to show what things look like in the .dts file
- Clean up the language a bit and make things more consistent
Also fix some errors, like 'properties: compatible: ...' being wrong
(missing 'constraint:' and compatible strings in the wrong place).
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This toolchain is no londer supported or needed. It was used to build
configurations that are now being removed.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This board and SoC was discontinued some time ago and is currently not
maintained in the zephyr tree.
Remove all associated configurations and variants from the tree.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This board and SoC was discontinued some time ago and is currently not
maintained in the zephyr tree.
Remove all associated configurations and variants from the tree.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This board and SoC was discontinued some time ago and is currently not
maintained in the zephyr tree.
Remove all associated configurations and variants from the tree.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The documentation that describes how Python and pip interact with the OS
when installing packages used to be under a common section, and was
moved to the west bootstrap one later on. Since this information is
required early on (for example on Linux when installing CMake via pip3),
move the info to its own section and link to it from others.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Remove the version numbers from the distribution listings, since those
get outdated quickly and on top of that they are causing confusion due
to those being now too old to contain recent versions of CMake and DTC.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
* z_NanoFatalErrorHandler() is now moved to common kernel code
and renamed z_fatal_error(). Arches dump arch-specific info
before calling.
* z_SysFatalErrorHandler() is now moved to common kernel code
and renamed k_sys_fatal_error_handler(). It is now much simpler;
the default policy is simply to lock interrupts and halt the system.
If an implementation of this function returns, then the currently
running thread is aborted.
* New arch-specific APIs introduced:
- z_arch_system_halt() simply powers off or halts the system.
* We now have a standard set of fatal exception reason codes,
namespaced under K_ERR_*
* CONFIG_SIMPLE_FATAL_ERROR_HANDLER deleted
* LOG_PANIC() calls moved to k_sys_fatal_error_handler()
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
There had been some changes applied on the API after that documentation
was made. Reflect the API behavior change and correct a minor issue.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Rename the controller Kconfig option BT_LL_SW to
BT_LL_SW_LEGACY in preparation towards switch to new Link
Layer implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add some diagrams showing the different scheduling algorithms we
support.
The diagrams were made using draw.io and can be edit using draw.io.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The Particle mesh feather boards provide device-tree overlays that
allow individual applications to select the SPI peripheral to be
used for the pins associated with a specific labelled SPI device.
This is necessary because different peripheral instances have slightly
different properties.
Add BOARD_DIR to DTS_ROOTS so these shared files can be located when
included from application-specific overlays.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
This patch updates the GAP ICS to 7.4.1.
It updates the Bluetooth Spec to 5.1 and added missing ICS tables.
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
There are a few reasons why sanitycheck will only build a test and not
run it: list them in the developer guide. Also lists the --options that
provide that information and update their --help message.
A couple other --help fixes.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
We use the following commands to rename any
SW._GPIO_{CONTROLLER,PIN,FLAGS} to
DT_ALIAS_SW._GPIOS_{CONTROLLER,PIN,FLAGS}
git grep -l SW._GPIO_CONTROLLER | xargs sed -i 's/SW\(.\)_GPIO_CONTROLLER/DT_ALIAS_SW\1_GPIOS_CONTROLLER/g'
git grep -l SW._GPIO_PIN | xargs sed -i 's/SW\(.\)_GPIO_PIN/DT_ALIAS_SW\1_GPIOS_PIN/g'
git grep -l SW._GPIO_FLAGS | xargs sed -i 's/SW\(.\)_GPIO_FLAGS/DT_ALIAS_SW\1_GPIOS_FLAGS/g'
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit adds a short note in reference/kernel/other/float.
The note instructs to apply pre-tagging of ARM threads to
indicate that they indend to use the FP services.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Convert DT_.*_GPIO_{CONTROLLER,PIN,FLAGS} ->
DT_.*_GPIOS_{CONTROLLER,PIN,FLAGS)
Used the following commands to make these conversions:
git grep -l DT_.*_GPIO_CONTROLLER | xargs sed -i 's/DT_\(.*\)_GPIO_CONTROLLER/DT_\1_GPIOS_CONTROLLER/g'
git grep -l DT_.*_GPIO_PIN | xargs sed -i 's/DT_\(.*\)_GPIO_PIN/DT_\1_GPIOS_PIN/g'
git grep -l DT_.*_GPIO_FLAGS | xargs sed -i 's/DT_\(.*\)_GPIO_FLAGS/DT_\1_GPIOS_FLAGS/g'
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Clean up the INPUT paths for doxygen scanning:
- directory scans include sub-directories so no need
to include them explicitly
- remove excluded (legacy) includes that no longer exist
Sync directory changes in the CMakeLists.txt (as noted in the comments)
Add content to the home page of the doxygen-generated HTML, and add a
Zephyr branding theme.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Fixes: #6773
We have directives in conf.py to create redirect links for docs that
have been moved around because of content reorganization. Reduce the
number of messages written out while debugging was going on and add some
comments to conf.py to explain how the directive works.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
When using a build folder format with build.dir-fmt that includes any
parameters that need resolving, the west runners cannot find the folder
since the required information (board, source dir or app) is not
available.
Add a very simple heuristic to support the case where a build folder
starts with a hardcoded prefix (for example 'build/') and a single build
is present under that prefix.
The heuristic is gated behind a new configuration option:
build.guess-dir
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The first word is used as a pointer, meaning it is 64 bits on 64-bit
systems. To reserve it, it has to be either a pointer, a long, or an
intptr_t. Not an int nor an u32_t.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Clear Linux exports to all users a list of "aggressive" compiler and
linker flags. Zephyr's CMake build system will either warn or fail
because of these. Add one magic command that solves the issue.
More background information at https://superuser.com/a/1452523/111302
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Folks found the use of @rststar/@endrststar non-intuitive (wanted to use
@rststart). The "star" was there indicating the doxygen comment lines
had a leading asterisk that needed to be stripped, but since our
commenting convention is to use the leading asterisk on continuation
lines, the leading asterisk is always there. So, change the doxygen
alias to the more expected @rst/@endrst.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The Quark D2000 is the only x86 with an MVIC, and since support for
it has been dropped, the interrupt controller is orphaned. Removed.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Similar deal to commit cc14c40a2d ("kconfiglib: Unclutter symbol
strings, avoid redundant writes, misc.").
Hide the direct dependencies in the defaults, selects, and implies
sections. Do the same in menuconfig/guiconfig as well.
This uses a new Kconfiglib API, so update Kconfiglib to upstream
revision 164ef007a8. This also includes some minor optimizations and
cleanups.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Found a few annoying typos and figured I better run script and
fix anything it can find, here are the results...
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The zephyr-file role creates a link to the GitHub copy of a file. Some
files have been moved so update the file references in the documentation
(found by scanning for uses of :zephyr-file:)
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Fix misspellings and doc issues missed during regular reviews (including
some files without a trailing newline)
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
In order to expose west to the majority of users, default to 'all'
instead of 'cmake' in the 'tool' option. This means that, unless
otherwise specified, build instructions will be generated for both west
and cmake by default.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Clean up some stray references to cmake in doc, boards and
samples that don't make explicit use of the zephyr app extension,
as well as other minor doc fixes.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
In order to simplify the current implementation and to prepare for a
change where we default to west as the standard build tool, partially
refactor the generation of cmake-based build instructions:
- Introduce `cd-into` as boolean flag that controls whether build
instructions are generated from the current working directory or from
inside the actual app folder. In the case of cmake, this includes
changing into the build folder to run ninja or make.
- Default to building from the current working directory, in the case of
cmake using the `-B` flag to create the build folder.
- Remove the usage of ZEPHYR_BASE with the `zephyr-app` option.
The option itslef is kept fsince it has semantic value, and a comment is
added when used.
- Consolidate the _generate_make and _generate_ninja functions into a
common code block inside _generate_cmake.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The DT spec. only has "okay" and not "ok". The Linux kernel has around
12k "okay"s and 300 "ok"s.
The scripts/dts scripts only check for "disabled", so should be safe re.
those at least.
The replacement was done with
git ls-files | xargs sed -i 's/status\s*=\s*"ok"/status = "okay"/'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This option uses a lot of typing, so point out there's a way to save
keystrokes using -C.
Tweak the language around the target toolchain.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Make it clearer that the note about setting QEMU_BIN_PATH only applies
if you've got the Zephyr SDK installed.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
There are a few different places where alternatives for setting
environment variables are described. None of them is 100% complete, so
the results are likely to be confusing.
Make a single page on setting environment variables, how the zephyrrc
files work, how the zephyr-env scripts work, and some of the important
environment variables, with appropriate references elsewhere. (This is
inspired by the Arch wiki's excellent page on installing programs.)
Link to it from the getting started and application development pages
instead of repeating the information. This has the benefit of
shortening the getting started guide a bit more.
Add some concrete advice on checking the toolchain environment
variables in particular. This is a stumbling block for beginners.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Updates based on discussion and changes in supported features.
- Make the guide shorter by removing content that's not relevant to
most users who are truly just getting started, such as information
about pre-LTS versions that did not support west, and by being more
concise in some places.
- Decrease the number of colored boxes. At the latest TSC F2F, the
"note / warning / note / tip" contents were identified as a
readability problem.
- Add additional information based on new west features, like "west
boards".
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
The k_stack data type cannot be u32_t on a 64-bit system as it is
often used to store pointers. Let's define a dedicated type for stack
data values, namely stack_data_t, which can be adjusted accordingly.
For now it is defined to uintptr_t which is the integer type large
enough to hold a pointer, meaning it is equivalent to u32_t on 32-bit
systems and u64_t on 64-bit systems.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This commit rewrites the documentation section describing
the Shared FP registers mode for Cortex-M to align with the
latest architecture rework of Shared FP mode.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Enable generation of doxygen documentation for kernel APIs that are
behind Kconfig options and add a note about the option needed to enable
the APIs.
Enable both CONFIG_SCHED_CPU_MASK and CONFIG_SCHED_DEADLINE in doxygen
config file.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add the possibility of configuring the build folder format in west's
configuration system.
The build.dir-fmt configuration option controls how west will create
build folders when not specified, the following parameters are currently
accepted:
- board: The board name
- source_dir: The relative path from CWD to the source directory
- app: The name of the source directory
If CWD is below source_dir in the directory hierarchy then source_dir is
set to an empty string.
This means that if one sets:
[build]
dir-fmt = build/{board}/{source_dir}
Then when building samples/hello_world from zephyr's root for the
reel_board the build folder will be:
./build/reel_board/samples/hello_world
but when building it from inside the samples/hello_world folder it will
instead be:
./build/reel_board
Fixes https://github.com/zephyrproject-rtos/west/issues/124
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
This had numerous problems, but should now be working
end-to-end and produce correct reports with gcovr 4.1.
Use of sanitycheck is now much clearer.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
A recent Kconfiglib change turns
config A
bool
prompt "foo" if C && D
default A if B && C && D
depends on C && D
into
config A
bool "foo"
default A if B
depends on C && D
Where e.g. D might be from a surrounding menu/if.
Update the note at the end of symbol pages to clarify that only the
'depends on' includes propagated dependencies.
Piggyback some minor cleanup.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This adds code to each page needed for gathering google analytics
tracking data to the LF-provided Global site tag.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Documentation updated, added reference to the latest
LPClink2 firmware, default provided firmware may not
work on latest boards (e.g. LPC55xx).
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
Add documentation for the new GUI configuration interface in the
Application Development guide.
Also update all the images, touch up the language a bit, and tweak some
minor stuff:
- Say *.conf instead of .conf to make it clearer that .conf isn't the
literal name
- Add a missing -D<board> argument when running cmake
- Use figure:: instead of image::. Comes out left-aligned and with
space between the images, which looks nicer.
- Explain what '- -' and '-*-' means in the terminal menuconfig.
tkinter isn't included by default in many Python installations, despite
being part of the Python standard library, so also add the required
packages to the Development Environment Setup section of the manual. Add
a note to the Application Development section as well, to help
debugging.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Update menuconfig (and Kconfiglib, just to sync) to upstream revision
7e0b9f7ae1, to get these commits in:
menuconfig: Improve space/enter behavior slightly
Space toggles value is possible, and enters menus otherwise. Enter
works the other way around.
Make this explicit in the code, which also fixes some corner cases,
like space doing nothing on a y-selected menuconfig symbol.
-------------------------------------------------------------------
menuconfig: Fix display issue for unsatisfied-deps selected symbol
with children
A symbol with unsatisfied direct dependencies can end up with visible
children in an implicit submenu if it is selected (though that
generates a warning), so the optimization in _shown_nodes() isn't
safe, and causes the child nodes to not be shown outside show-all
mode.
Just remove the optimization. Trying things out some more,
everything's plenty fast enough anyway.
Checking the direct dependencies of the parent instead would be safe.
The menu path now says "(Top)" instead of "(top menu)" too, which is a
bit more compact. Make the same change in genrest.py.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The directory tree description was missing a code-block shorthand so the
following lines weren't formatted correctly.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Added CONFIG_LOG_DETECT_MISSED_STRDUP (by default on) which enables
scanning of log message strings in search for %s and reports if
string address is not from strdup buffer pool and outside read only
memory section which indicates that log_strdup() wrapping is missing
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The module processing logic in Zephyr requires Python, since it uses a
Python script to locate and process the modules. It is therefore
required to find the Python executable using CMake before actually
including the CMake script that processes the modules. In order to
prevent this from happening again, move the inclusion of version.cmake
as well in case that script chooses to use Python in the future.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
With the addition of a local CMake variable ZEPHYR_BASE that mirrors the
value of the environment variable the documentation build broke on
Windows. This is because CMake was incorrectly interpreting backslashes
present in the Windows path as escaping characters. In order to avoid
this, use CMake's built-in file(TO_CMAKE_PATH) functionality, which
converts the path to a canonical version using forward slashes only.
At the same time rework boilerplate.cmake to use the same mechanism
instead of manually replacing backslashes and removing trailing ones.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Like for other choices, it's the prompt that gets displayed within the
parentheses, not the symbol name.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Takes a while to figure out what it's there for, so explain what it does
and give an example of a good use for it.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Do not always print general help for ping cmd. Only if user supplies
'-h' or '--help' command, print information about the parameters.
After this the generated HTML documentation looks better for the
ping command.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Move to a new guide which will expand on how to submit modules and how
to maintain them.
Also move topology documentation to repository management section where
it fits better.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
builds@lists.zephyrproject.org archives the CI build results for every
and nightly build. Add references to this in the contribution
guidelines and introduction (pulled from README).
Also added a reference to the "Asking for Help" doc (there was a note to
add this once that doc was merged).
Fixes: #15652
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The current order makes no sense. Move it earlier in the order, so the
catch-all page appears last.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Grammar and formatting improvements, as well as changes requested in
review that weren't made (in particular, the ones recommending using
"pip3 show -f west" to see where west is installed instead of listing
common places that might not be right.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Zephyr requires braces on every code block that a keyword introduces, so
list the complete set in the documentation.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This fixes a corner case.
The ZEPHYR_BASE variable might be set in the environment at generation
time, but unset at build time. Save it in the cmake -E env calls to
scripts that need it.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Create a new dedicated section for west installation that details
some of the finer aspects of the process and steps involved.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add a completion command that dumps the contents of a shell
completion file present in the zephyr repository.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Unique PID is required for each sample in order
to be recognized by host.
When creating a new sample:
- Add USB_PID_<SAMPLE_NAME>_SAMPLE
in samples/subsys/usb/usb_pid.Kconfig
- Create Kconfig file in your sample's subdirectory, containing:
config USB_DEVICE_PID
default USB_PID_<SAMPLE_NAME>_SAMPLE
source "Kconfig.zephyr"
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
The approved trademark name is Wi-Fi so update references to WiFi and
other spellings to Wi-Fi in documentation and Kconfig help strings.
(Note that use of spelling variatios of "wifi" in module names, CONFIG
names, link names and such are untouched.)
https://www.wi-fi.org/
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The west build --help output no longer fits in a single page. Move
details and examples into the documentation, so the -h output doesn't
require scrolling around.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
This can be used to override the default CMake generator
permanently. Its values are the same as those acceptable to cmake's -G
option.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Try to make the language simpler. Introduce each example with a
paragraph that says "To <DO XYZ>" to make them easier to find.
Move the config options to the documentation for that command to make
them easier to find.
Add some more examples for use cases we've gotten questions about.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
- Respect the BOARD environment setting.
- Don't require --force if the board can't be figured out: it might be
set in CMakeLists.txt, for example. Instead, downgrade to a warning
which can be disabled with "west config build.board_warn false".
- Add a build.board configuration option used as a final BOARD fallback
after CACHED_BOARD (in the CMake cache), --board (command line), and
BOARD (environment).
- Keep the config docs up to date.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Add a new "boards" command that is able to list all the boards in the
upstream tree. There is currently no support for out-of-tree boards.
The command executes cmake to use the built-in CMake script,
boards.cmake, to list the boards, and then stores the information
retrieved and allows the user to present it in a user-definable format.
Fixes https://github.com/zephyrproject-rtos/west/issues/53
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This commit removes the activation of the FP context
in ARM system boot. There is no need to do this, since
the FP context will be activated in the presence of
floating point instructions. We update the reference
documentation accordingly.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Added macros which can be used to create a command which depends
on compilation flag. Macros are a cleaner alternative to #ifdefs
around command registration and command handler.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Major changes are:
- Expose settings backend API to enable custom backend support.
- Add a new CONFIG_SETTINGS_CUSTOM backend to allow registering a custom
backend.
- Change api of the handlers h_set() routines to allow for
backend-specific read callbacks.
- Provide a customizable settings_backend_init() routine for custom
backends.
- Move runtime settings support to be its own backend.
Signed-off-by: François Delawarde <fnde@oticon.com>
The previous mcuboot reference didn't make sense - it linked to
itself. Linking to the official website should be more useful.
Signed-off-by: Jacob Siverskog <jacob@teenage.engineering>
When making a build folder pristine until now we were running the
'pristine' build target. The issue with that is that ninja/make or
whatever build tool is being used might decide to re-run CMake itself if
some of the dependencies have changes. This might trigger an error that
is unfriendly and unnecessary, since the user is explicitly asking for
the build folder to be wiped before starting a fresh build.
To avoid this issue restor to running directly the CMake script that the
'pristine' build target itself uses, so as to make sure that the build
folder is wiped unconditionally regardless of changes made to the tree.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The dependencies in the scripts are figures, images, includes or literal
includes. Typically those dependencies are placed relative to the .rst
file that is being copied, but in some instances you might want them to
refer to an absolute path which, in fact, is relative to Sphinx's
top-level source directory. In this case, and as long as the top-level
source directory is provided, do not emit a warning.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
I often wish I had a short and Zephyr-specific place to point people
to when they're asking for help in ways that make it hard to help
them.
Add one.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Previously, symbols not defined with 'menuconfig' with children weren't
listed in the children's menu paths. It was deliberate, but it's
probably an anti-feature in retrospect, because it can make it harder to
find stuff by following the menu path.
Don't try to be clever and just list all the parent nodes in the menu
path.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Just like board's can be placed in out-of-tree BOARD_ROOT's, we now
support DeviceTree sources and bindings being placed in out-of-tree
DTS_ROOT's.
This required for out-of-tree drivers that use DeviceTree.
To implement this we get rid of various user-settable CMake variables
like DTS_APP_BINDINGS, DTS_APP_INCLUDE, and instead have ZEPHYR_BASE,
APPLICATION_SOURCE_DIR and out-of-tree directories conform to using
the same DTS_ROOT concept and directory structure.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Add a new command-line and build config option, `pristine`, that the
user can pass to `west build` or set in its configuration file(s) in
order to automatically trigger a pristine build on every build or
whenever west considers it required.
The option can take the following values:
- never: Never run the target
- always: Always run the pristine target before building
- auto: Run the pristine target when required
With `auto`, the pristine target will be run when running
west with an existing build folder containing a build system and:
- Selecting a different board from the one currently in the build system
- Selecting a different application from the one currently in the build
system
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
All docs should have a label at the top that would
permit cross-document linking via :ref:`labelname`.
Update "testing" label that would have conflicted and fix the only
reference to the old "testing" label in development process
documentation.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Clean up accumulated release notes with (final) clarity edits, spell
check, and such. Remove "Working Draft" from the heading.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Added information to release notes about Zephyr modules which allow for
splitting ext/ into multi-repo instead using Zephyr modules.
Signed-off-by: Torsten Rasmussen <torsten.rasmussen@nordicsemi.no>
Move the doc version selection menu from the bottom of the left nav menu
to above the TOC menu, making it more obvious.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Added release notes for 1.14 release.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Update the relevant release notes for the documentation improvement
for version 1.14.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
tinycrypt documentation wasn't included in the table of contents so add
it into the guides section.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Callbacks called from the RX thread may block, but should avoid doing
it for long periods of time.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Renamed the page "review_process.rst" to "dev_env_and_tools.rst"
as the old name did not cover all its content.
Moved the labels page content into this
"Developemnt Environment and Tools" page.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
There has been some confusion about how GitHub labels
should be used.
This commit adds a new doc page, which tries to clarify this.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Added information to the release notes about the new drivers
in native_posix, the new nrf52_bsim board and the BabbleSim
integration in CI and testcases.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Update 1.14 draft release notes with doc changes. Also edited existing
release notes material to make sentence tense consistent (past tense).
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
This commit extends existing documentation by providing an example
of how to build Hello World sample application for MCUboot using
west.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Update the release notes page to include the 1.14 release notes
(currently a draft in progress), and update the main index page to
clarify how to get to documentation for other Zephyr versions.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
This patch adds information about the security vulnerabilities being
fixed in the 1.14 release.
Add a intro statement that these issues were addressed,
and include x86 vulnerabilities addressed in this release.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Add a missing reference to how west is used to set ZEPHYR_MODULES in
without-west.rst, augmenting the application development guide a bit
to include this in the list of important variables, cleaning that up a
bit while we are here and adding some more west details.
Add a big fat warning in the getting started guide that using Zephyr
without west is not for the faint of heart.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Add a note to mention how to get openocd working on windows.
This is taken from stlink-v21.rst file before its reformatting.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
As discussed in the TSC meeting of 2019/03/27:
To ensure that we do not forget to remove an API 2 releases later
and to provide a bit better visibility about when the removal
is planned, require that a GH issue be created, and that this
issue be added to the roadmap for the apropriate release.
As a free bonus:
Removed a redundant line in the list and added one missing article.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
When generating the Kconfig reference documentation, enable the warnings
for undefined Kconfig options in order to make sure all references are
met.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
In order to parse all the Kconfig files that make up the whole Kconfig
tree we need to process the modules, since this can optionally provide
Kconfig files. In order to do so, include the modules CMake file so that
they are listed and a Kconfig.modules is generated.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This page has been replaced by doc/guides/debugging/probes.rst and
doc/guides/debugging/host-tools.rst
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Zephyr boards use a wide range of debug probes and debug host tools that
can often be confusing to users. Introduce a new debugging guide that
documents all the different variations of debug probes and host tools in
one place, including which combinations are valid.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
- add glossary terms for important concepts we have to explain often,
like "west installation"
- add autodoc directives for pulling in west API docs
- add missing documentation for built-in features like west's
configuration, extension commands, etc.
- add missing documentation for "west sign" extension
- describe the manifest in a self-contained way rather than linking to
the relevant pykwalify schema, also adding a missing reference to
"west manifest" in the miscellaneous multi-repo commands list
- move various details regarding history and motivation to why.rst
among other changes to repo-tool.rst, leaving it closer to a "tell
me what I really need to know" style overview
- update planned features
Fixes: #14992
Signed-off-by: Marti Bolivar <marti@foundries.io>
Several of our extensions don't declare they are parallel read or
write safe. Upon inspection, they are.
Not declaring parallel read safety defeats a lot of the speed ups that
are possible when using SPHINXOPTS="-j=auto", so mark the extensions
safe and get the performance back.
Signed-off-by: Marti Bolivar <marti@foundries.io>
Add a note in the tagging section of the release process that explains
why using GitHub release process for tags should NOT be done.
Fixes#14985
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Fixes pylint warnings like this one:
doc/conf.py:325:0: W1401: Anomalous backslash in string: '\s'.
String constant might be missing an r prefix.
(anomalous-backslash-in-string)
The reason for this warning is that backslash escapes are interpreted in
non-raw (non-r-prefixed) strings. For example, '\a' and r'\a' are not
the same string (first one has a single ASCII bell character, second one
has two characters).
It just happens that there's no \s (or \., or \/) escape for example,
and '\s' turns into two characters (as needed for a regex). It's risky
to rely on stuff like that regexes though. Best to make them raw strings
unless they're super trivial.
Also note that '\s' and '\\s' turn into the same string.
Another tip: A literal ' can be put into a string with "blah'blah"
instead of 'blah\'blah'.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Discovered with pylint3.
Use the placeholder name '_' for unproblematic unused variables. It's
what I'm used to, and pylint knows not to flag it.
Python tip:
for i in range(n):
some_list.append(0)
can be replaced with
some_list += n*[0]
Similarly, 3*'\t' gives '\t\t\t'.
(Relevant here because pylint flagged the loop index as unused.)
To do integer division in Python 3, use // instead of /.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Currently, the Kconfig.modules file is placed in the build directory
relative to the CMake "project". But technically, the file is not
project-specific, but global, or build-directory specific.
So we move it up one level to the CMAKE_BINARY_DIR instead. Currently,
there is only one project, so this change has no effect, but this
enables us to have multiple projects in the future, which again
enables multi-image builds.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
Some clarifications to BSD socket descriptions. Also added
rendering hints for some strings.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Rewrite who the members of the Security Group are
and move the 'ability' of the members to an outer
bullet point.
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
The sentence "To process process documentation." does not make
any sense at all.
Add missing "the" to the sentence "in form of".
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
This commit brings power management subystem documentation up to date
with the implementation. The main changes since the last time the
documentation was updated include introduction of power managment
policies.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
There exists SoCs, e.g. STM32L4, where one of the low power modes
reduces CPU frequency and supply voltage but does not stop the CPU. Such
power modes are currently not supported by Zephyr.
To facilitate adding support for such class of power modes in the future
and to ensure the naming convention makes it clear that the currently
supported power modes stop the CPU this commit renames Low Power States
to Slep States and updates the documentation.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Not needed in Python. Detected by check C0325 in pylint3.
Also replace an
if len(tag):
with just
if tag:
Empty strings, byte strings, lists, etc., are falsy in Python.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This commit updates the documentation as follows:
- stresses that the lazy stacking preservation is disabled
by default and not supported in ARM Cortex-M builds,
- corrects the figure of extra stack requirement when
floating point services are enabled in ARM builds.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit provides the following fixes:
- Corrects the note regarding which ARM MCUs may support
floating point services
- Rewords the text stressing the undefined behavior when
multiple threads access the floating point registers.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The command `recheck` was always experimental and should not be part of
the contribution guidelines and flow. It is not working now, so remove
it from the docs.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
1. The build paragraph was listed with the run option.
But, we need to pass an argument to the native_posix board,
so "ninja run" alone is not good enough.
Plus, it was not coherent with the rest of the text, as
the paragraph intended to tell people how to build.
2. Added "sudo" to the run line, as the user needs extra
permissions to connect to a host BT controller.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Move the original documentation in the arduino_101 board to a common
section in the Bluetooth documentation and document the use of `btmon`
in general.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
A note in the Modules (External projects) section indicated
that in the future it would be possible to do something that
can be already done.
So, let's clarify the note with how it can be done.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Added some more content to the section about how to simulate
with BabbleSim and a couple of extra links.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
This is a revert of 45a4fbf2ae and
this commit removes the offending function references from
Networking chapter in 1.14 release note. After the BSD socket
documentation adds the function references we can revisit the
release note and add back the function references.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We previously created an improved version of searchtools.js (used by the
Sphinx search) to remove the reST tags shown in the search results.
This has now been fixed in the upstream version of searchtools.js along
with other speed and visual improvements, so we should remove our local
copy.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The latest release of the Windows toolchain has a critical bug,
Windows users should install the next-to-latest release instead.
To prevent Windows users from being affected we add a note about this
in the documentation.
Bug: https://github.com/zephyrproject-rtos/zephyr/issues/12257
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Linking to API material requires knowing the pecularities of how
doxygen, sphinx, and breathe work. In an attempt to hide some of this
we're preparing the current docs to allow use of configuration defaults
that will let us more simply use a default role that will hunt for a
reference target in the various domains that are available by using a
default "role" of "all". This will let us use the simple notation
`functionname` or `typename` without fully specifying the reference as
:c:func:`functionname`.
This patch cleans up exising docs that were (incorrectly) using single
backtics where double backtics should have been used, and also found
some typos (such as a space between the role name and the reference,
such as :file: `filename`, and a missing colon such as
c:func:`functionname`)
This is a start to address issue #14313
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Fixes a typo in board_porting.rst
Fixes wrong syntax for file markup element
in build-flash-debug.rst
Signed-off-by: Suryansh Sharma <suryansh@evilscientist.cc>
Add framework for device Idle Power Management(IPM)
for suspending devices based on device idle. This will
help in saving power even while system(CPU) is active.
The framework uses device_set_power_state() API set the
device power state accordingly based on the usage count.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
The existing device_set_power_state() API works only in synchronous
mode and this is not desirable for devices(ex: Gyro) which take
longer time (few 100 mSec) to suspend/resume.
To support async mode, a new callback argument is added to the API.
The device drivers can asynchronously suspend/resume and call the
callback function upon completion of the async request.
This commit adds the missing callback parameter to all the drivers
to make it compliant with the new API.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
User mode-related API functions have been renamed to use the
'z_' prefix, so we need to update the architecture porting
guide accordingly.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Let folks know that using amend and force pushes for adding review
changes is the recommend method for contributing to the project, but it
can cause some unexpected behavior from GitHub.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Get things started for the 1.4 release notes.
Individual teams will update their appropriate sections.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Add initial sections for the Bluetooth host stack, as well as a simple
diagram of the various protocol & profile layers.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Overhaul the Bluetooth documentation to split it into manageable units
and include additional information, such as architecture and tooling.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add a note installing programs manually on your Windows system: you may
need to update the Windows PATH so the system can file these programs.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Some people never use the menuconfig, but it makes a good sanity check
when making Kconfig changes, so encourage it for that. Mention a few
things that can be checked in it.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Add a section on how 'if' works to the 'Kconfig - Tips and Best
Practices' page, especially when combined with 'source'.
There seems to have been some confusion here that lead to a bunch of
duplicated dependencies. It's probably simpler than most people assume.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Use proper link to Zephyr source files. Fix rendering of special
options like NET_OK, NET_DROP and NET_CONTINUE.
Add reference links to network technologies documents.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In case of early crash, shell will not output logs. Added
documentation explaining how to handle such situations.
It is recommended to enable simple logger backend (RTT, UART)
which are available earlier.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The architecture document contained old information and is now
updated to match the reality.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
A new role :zephyr_file: is available that renders to a link to the file
or folder in GitHub. Find appropriate references using :file: and
convert to :zephyr_file: to take advantage of its linking capability.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Running checkpatch in pre-commit hook could be a constraint
for day to day work. Though, running it before pushing to
zephyr repo is highly recommended.
Add a series push script callable from pre-push hook.
Document how to use it in contribute section.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
In order to simplify the usage of `west build`, take a positional
argument with the source directory instead of requiring the `-s,
--source-dir` flag. This makes it easier and quicker to invoke west when
building, as well as being consistent with CMake.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The VLAN documentation had double wording and proper links to files
in github was missing, which did not look good in the rendered HTML
page.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Fix link to DNS Kconfig option. Add proper links to DNS files
in github. Fixed link to DNS sample application.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The L2 documentation was describing functionality that has changed
recently. Now it should match the current reality.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Avoids having it look like a Kconfig symbol reference (which gets
detected by an upcoming CI check).
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
There is no symbol called CONFIG_SRAM. Mention CONFIG_SRAM_SIZE and
CONFIG_SRAM_BASE_ADDRESS instead, and also mention that the DT_* values
they're generated from.
This gets rid of a false-positive undefined Kconfig symbol reference
too.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
CONFIG_ADC_QMSI_SAMPLE_WIDTH was removed in commit acc40d990a ("adc:
remove adc_qmsi driver"). It's only used as an example in the
documentation, but might as well use an existing symbol instead.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The Link Layer Discovery Protocol chapter was missing Overview
and also the API reference was not populated properly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In-tree, all usage of 'set_conf_file' is implementing the same
pattern (with some inconsequential differences).
To reduce copy-paste and get closer to dropping support for
'set_conf_file', we include this pattern into the built-in set of
patterns.
'set_conf_file' is causing issues for future extensions,
e.g. multi-image support, and is also the source of a lot of
duplicated code.
Note support for 'set_conf_file' is not dropped, it is only marked as
deprecated.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Adding OpenAVnu/gptp and linuxptp links to the doc.
Also the "Application interfaces" chapter had some style issues.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add a missing semicolon after /dts-v1/, and a blank line between
/dts-v1/ and the root node.
Use 'code-block:: none' instead of 'code-block:: yaml' as well.
DTS is not YAML.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The connectivity API will now point to BSD socket API instead
of legacy connectivity API (net_context.h) when creating
a network application.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The phrase 'low power state' is often incorrectly used to indicate
'low power' or 'deep sleep' states. This commit fixes the ambiguities
by renaming 'low power state' to 'power state' where necessary.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
CPU_LPS_n name used to indicate a low power state is cryptic and
incorrect. The low power states act on the whole SoC and not exclusively
on the CPU. This patch renames CPU_LPS_n states to LOW_POWER_n. Also
HAS_ pattern for Kconfig options is used in favor of a non standard
_SUPPORTED. Naming of deep sleep states was adjusted accordingly.
Following is a detailed list of string replacements used:
s/SYS_POWER_STATE_CPU_LPS_(\d)_SUPPORTED/HAS_STATE_LOW_POWER_$1/
s/SYS_POWER_STATE_CPU_LPS_(\d)/SYS_POWER_STATE_LOW_POWER_$1/
s/SYS_POWER_STATE_DEEP_SLEEP_(\d)_SUPPORTED/HAS_STATE_DEEP_SLEEP_$1/
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
No need to show
* native_posix board setup (native_posix_setup.rst)
* QEMU Ethernet setup (qemu_eth_setup.rst)
* QEMU SLIP setup (qemu_setup.rst)
* USBNET setup (usbnet_setup.rst)
in main network index as links to those chapters are already
found in "Networking with the host system"
(networking_with_host.rst) chapter. In order not to trigger
a doxygen warning, place the chapters into hidden toctree.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is an integral part of userspace and cannot be used
on its own. Fold into the main userspace configuration.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Group the networking chapters for reference document so that the
layout is more logical and easier to read.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Move test related code and the testsuite away from tests/ and make it a
proper subsystem.
The way tests were integrate in the tree was not obvious and actual
tests were intermixed with the testsuite code.
This will allow us to have trees with the testcode and without the
samples by just remove the folders tests/ and samples, needed for
isolating actual code from test/sample code.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Do not load the GENERATED_DTS_BOARD_CONF if in doc mode, since it will
not defined as it doesn't apply. No need to defined it to a dummy value.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
- Added various contents from stale wiki pages
- Added API life cycle document
- Add pictures showing process in general
- Split the document into multiple sections.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The UDP API functions are for Zephyr internal use only so do
not generate documentation for them.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use file(GLOB_RECURSE ...) to generate a superset of doxygen input
files. Use this list as a dependency for a new empty file
doc/_build/last_doxy_run_tstamp.
The incremental build time to re-run "make htmldocs-fast" after a small
.rst doc change is brought down from from ~8s to ~4s on my Linux system
and from ~30s to less than 10s on my MacBook.
(Doxygen changes are still slow for a couple reasons recently isolated
and documented in doc/CMakeLists.txt)
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Clearly shows where time is spent. More specifically helps work on the
next commit while removing noise from it.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
This patch removes the free space calculation from nvs initialization.
The available space can be calculated if required using the routine
nvs_calc_free_space.
This patch also removes the locked state of nvs, it is not possible to
get in a locked state.
Changes:
Removed locked state and free_space from the nvs structure.
nvs_reinit(): has been replaced with by an internal only function
_nvs_startup().
nvs_write(): removed the possibility to place the file system in a
locked state, if to many gc operations are required it will return
-ENOSPC.
ssize_t nvs_calc_free_space(): introduced, calculates the free space
that is available in the nvs file system.
Signed-off-by: Laczen JMS <laczenjms@gmail.com>
Add short overview for DHCPv4. Do not add dhcpv4 library internal
state in the documentation.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove most unnecessary instances of `export` and `cmake` use that can
instead be replaced with `zephyr-app-commands` or similar. This is to
avoid documentation using different mechanisms to describe the same
actions and in preparation for documenting `west build` everywhere.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add more information about DNS resolver to documentation. Move
generic DNS information from the sample application into DNS
resolver documentation.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Added more detailed information how to connect Zephyr instance
to host system like Linux desktop.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add macro for creating subcommand set in a way that is
accepted by C++ (SHELL_STATIC_SUBCMD_SET_CREATE). Currently,
it exists along with SHELL_CREATE_STATIC_SUBCMD_SET which is
used in the tree but it is not liked by cpp.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
1. There's now proper fdtable, pointer casting to "fd" is gone.
2. select() was implemented.
3. Enumerate implemented functions more thoroughly, so users can
fulltext-search them.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The documentation shows the steps to be followed for generating the
code coverage reports.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Update dts documentation.
Rework some parts to provide more clarity and elaborate
yaml bindings usage.
Fixes#10318
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Use a variable to set the doxygen output directory so we can refer to it
later when fixing mtimes instead of hardcoding it.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Skipping the setup of a toolchain is especially nice for brand new users
who just want to give qemu_x86[_64] or native_posix a quick try, gives a
great first impression.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Doxygen doesn't support incremental builds. It could be ok because it
doesn't take much time in this codebase. However it's not because it
makes old output look new which has a cascade effect on sphinx:
https://sourceforge.net/p/doxygen/mailman/message/36580807/
Make doxygen artificially smarter by saving and restoring modify
timestamps on the filesystem for doxygen output files that haven't
changed.
On my system this brings down the time to run an incremental "make
htmldocs" from 75s down to 8s (cmake -DKCONFIG_TURBO_MODE=1 used in both
cases)
This optimization speeds-up non-doxygen documentation work only.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Make kconfigfunctions.py agnostic to where GENERATED_DTS_BOARD_CONF is
located.
We don't want to encode the path of GENERATED_DTS_BOARD_CONF into more
places than necessary. Also, re-using GENERATED_DTS_BOARD_CONF makes
it easier to change where generated_dts_board.conf is located.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Document building the samples with west (for now only in the Getting
Started guide).
Also switch to `reel_board` by default since `arduino_101` is no longer
well supported.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Reference the multiple repository management section in the Getting
Started Guide, so that users have a direct link to the text describing
how multiple repositories are managed.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Documentation for kconfigfunctions, mentions they look up elements
in "the DTS generated "conf" style database". This indication
could be cryptic for new zephyr users. Adding the exact name and
path of the file for disambiguation.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This commit changes the names of SYS_POWER_DEEP_SLEEP* Kconfig
options in order to match SYS_POWER_LOW_POWER_STATE* naming
scheme.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The SYS_POWER_LOW_POWER_STATE_SUPPORTED and SYS_POWER_LOW_POWER_STATE
suggests one low power state but these options control multiple
low power state. This commit uses plural in the names to indicate
that.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
When generating instructions for both west and CMake, use paragraphs and
literal blocks for better layout.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Overhaul the application extension in order to modularize its structure
and add support for building, flashing and debugging with west.
Both west and CMake are now supported, even at the same time, in which
case instructions for both will be generated.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Correct the handling of the HOST_OS list so that we do not insert an
extra line break because of the 'all' entry and we correctly insert the
required comment.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Part of Power Management API was incorrecty documented under
"Power Management Hook Interface" section. This commit fixes
that problem by introducing "System Power Management APIs".
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
This file is now needed by Kconfig and was not created during doc
creation. So touch an empty file to make doc build go through.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Document the build system integration with west and any projects managed
by it.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Signed-off-by: Torsten Rasmussen <torsten.rasmussen@nordicsemi.no>
This patch adds a JSON web token library that adds the capability
to sign JSON tokens. This was located in subsys due to the dependency
on MBEDTLS, which resides in /ext.
Signed-off-by: David Brown <david.brown@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Document the `west build` command in the section corresponding to the
west commands that deal with the CMake cache, which is now named
"Building, flashing and debugging" for consistency.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Clarify the docs for dt_str_val that if the name isn't found we return
and empty string. Also cleanup the code slightly as we don't need to
escape the double quote.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Replace generating CONFIG_ symbols with DT_ symbols for chosen
properties like 'zephyr,console' or 'zephyr,bt-mon-uart'. We now use a
kconfigfunctions (dt_str_val) to extract the info from dts into Kconfig.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Since we know do DTS before Kconfig we should try and remove dts from
creating Kconfig namespaced symbols and leave that to Kconfig. So
rename CONFIG_CCM_<FOO> to DT_CCM_<FOO>.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
On (at least) Fedora the /usr/bin/sphinx-build binary always belong to
python2-sphinx which results in a confusing "cannot import name
DEVNULL" error below (DEVNULL is available from python 3.3).
Tell find_program() to look for sphinx-build-3 first and then
sphinx-build next.
(shorten) Traceback (most recent call last):
File "/usr/lib/python2.7/site-packages/sphinx/config.py",
line 161, in __init__ execfile_(filename, config)
...
File "conf.py", line 17, in <module>
from subprocess import CalledProcessError, check_output, DEVNULL
ImportError: cannot import name DEVNULL
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
The power management framework used two different abstractions
to describe power states. The SYS_PM_* given coarse information
what kind of power state (low power or deep sleep) was used,
while the SYS_POWER_STATE_* abstraction provided information
about particular power mode.
This commit removes the SYS_PM_* abstraction as the same
information is already carried in SYS_POWER_STATE_*.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
This was never a long-term solution, more of a gross hack
to get test cases working until we could figure out a good
end-to-end solution for memory domains that generated
appropriate linker sections. Now that we have this with
the app shared memory feature, and have converted all tests
to remove it, delete this feature.
To date all userspace APIs have been tagged as 'experimental'
which sidesteps deprecation policies.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Introduces the ARCH_ROOT argument, similar to BOARD_ROOT and SOC_ROOT.
This enables support for out-of-tree architectures.
The ARCH_ROOT out-of-tree layout is expected to be the following:
* ${ARCH_ROOT}/arch/${ARCH}/
* ${ARCH_ROOT}/include/arch/${ARCH}/ (Optional)
Signed-off-by: Klaus Petersen <kape@oticon.com>
Use (free license) fontawesome icon characters to pretty up the Zephyr
home page navigation blocks added earlier. (The fontawesome font famliy
is already included by the read-the-doc theme so we can take advantage
of that.)
Also amend the section descriptions.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Move guides and APIs into separate directories and cleanup naming
introducing index files rather than named section files.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
As we are removing net_app and net_pkt based libraries and
applications, CoAP legacy based libraries and apps are moved
to socket based implementations. So removing legacy CoAP.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Troubleshooting paragraph explains case when either
nvs API returns -ETIMEDOUT or MPU faults happens.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Add docs on the kconfigfunctions that we support. We only expose some
functions related to device tree currently.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Export a new KCONFIG_DOC_MODE environment variable when building the doc
and invoking Kconfig, so that the functions that expect a build folder
can accordingly return a hardcoded value.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This commit implements a CTF-backend for Zephyr's tracing API.
The CTF-backend itself is split in a middle-layer and a bottom-layer.
- Middle-layer decides the payload in event transactions,
- Bottom-layer implements the IO transport.
A simple POSIX bottom-layer is provided so far.
Signed-off-by: François Delawarde <fnde@oticon.com>
The net-app API is removed. Users should use the BSD socket API
for application development.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Reorganize the entry page so it's not as jarring of a landing by
reorganizing the content a bit in the rest of the toctree.
This makes it easier to read more progressively without having to jump
around as much.
Signed-off-by: Marti Bolivar <marti@foundries.io>
There are no longer per-partition initialization functions.
Instead, we iterate over all of them at boot to set up the
derived k_mem_partitions properly.
Some ARC-specific hacks that should never have been applied
have been removed from the userspace test.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The public APIs for application shared memory are now
properly documented and conform to zephyr naming
conventions.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Create a reference page for each peripheral and move doxygen API
reference to the main documentation page.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The MQTT over sockets doxygen group was not referenced, hence the API
documentation was missing. Replace legacy MQTT lib reference with a new
one.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The app shared memory macros for declaring domains provide
no value, despite the stated intentions.
Just declare memory domains using the standard APIs for it.
To support this, symbols declared for app shared memory
partitions now are struct k_mem_partition, which can be
passed to the k_mem_domain APIs as normal, instead of the
app_region structs which are of no interest to the end
user.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Changed 'in place' mode to bypass logger system and directly
call active backends. With this approach memory footprint of
the logger can be significantly reduced in terms of RAM and ROM.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add additional details about what running `west init` and `west update`
actually does in the local filesystem.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
In case west is not present or was not used to initialize the local
zephyr repository, avoid failing the documentation build by including a
placeholder file.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
In order to be able to merge the topic branch, we require a few
fixes to CI.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
West now supports a mechanism for extension commands. Use it to move
the command implementations that are tightly coupled with boards and
the zephyr build system back into the Zephyr repository.
This patch doesn't include test cases. Those will be moved over in a
subsequent patch.
Signed-off-by: Marti Bolivar <marti@foundries.io>
Overhaul the west documentation so that it matches the model that is
currently implemented in the west repository.
This model is no longer subject to change in the short or mid term,
since it has been selected as the only viable one for multi-repo
management using west.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Since west is no longer included in the Zephyr repository, instruct
users to install and use west in order to obtain the Zephyr source code.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Signed-off-by: Torsten Rasmussen <torsten.rasmussen@nordicsemi.no>
Since west is no longer part of the Zephyr tree, we can no longer
hardcode its path anymore. Instead, use west itself to retrieve its
path, in order to point the documentation build to the correct
active west installation.
This is optional, and the documentation build will still work if west is
not installed on the system.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The old legacy APIs use net-app library and as that is being
removed, then the dependencies need to be removed also.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Continuation of a bullet list item wasn't indented properly, causing a
new list to be started (with odd indentation).
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Instead of having kernel APIs documentated in a separate page, move the
API references to the object pages and have everything in one place.
Remove the intermediate category page and list all section under the
kernel directly.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The top border on function names and other doxygen items made
documentation very difficult to read. Remove the top border and make the
auto-generated docs readable.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When referencing files from the git tree create a link to the file for
easy browsing of header files and other files of interest.
Borrowed from esspresif/esp-idf project and modified for Zephyr.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Building the documentation for all the Kconfig options significantly
adds to the total doc build time. When making and testing major changes
to the documentation, we provide an option to temporarily stub-out
the auto-generated configuration documentation so the doc build process
runs much faster.
To enable this mode, set the following option when invoking cmake
-DKCONFIG_TURBO_MODE=1
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Put the kernel overview at the top level of the kernel documentation and
make it visible immediatly when browsing the kernel docs.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Out-of-tree doc builds rely on extract__content.py to copy needed
content from the source folders to the build folders. To minimize what's
copied, all the reST files are copied plus files referenced by the reST
files. The extract_content.py script does a pattern match scan for
directives that reference other files (e.g., .. image::) and copies the
referenced file. It's not a smart parser though and doesn't ignore
directives in comments or in code-blocks. Rather than teaching the
script how to properly parse reST files, we'll just change the example
(in a code-block) to reference an existing image.
Fixes: #12621
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
There is an effort underway to make most of the Zephyr build script's
reentrant. Meaning, the build scripts can be executed multiple times
during the same CMake invocation.
Reentrancy enables several use-cases, the motivating one is the
ability to build several Zephyr executables, or images, for instance a
bootloader and an application.
For build scripts to be reentrant they cannot be directly referencing
global variables, like target names, but must instead reference
variables, which can vary from entry to entry.
Therefore, in this patch, we replace global targets with variables.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Add information about image size recommendations, and add some more
details about other reST features such as tables. Also added a flow
picture to the documentation generation doc.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Rather than specifying SHIELD via Kconfig, we move it to being
specified via the command line, similar to board.
So we can do:
-DSHIELD=x_nucleo_iks01a1
or, for multiple shields:
-DSHIELD="x_nucleo_iks01a1 frdm_kw41z"
Following cmake change, update x_nucleo_iks01a1 sample in order
not to enable CONFIG option anymore but set SHIELD cmake option.
Last, update documentation to reflect this change.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
1. Update shell documentation according to proposals in
PR #12437 (Extend shell meta keys).
2. Fix lines exceeding 80 characters limit.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
It was unclear how loading data from persisted storage works.
This patch introduce explanation for that.
Code examples were aligned to recent changes.
Removed misleading information about simultaneous back-end support.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Make the documentation page a little bit more interesting with top-level
navigation grid highlighting the most important sections with a brief
description.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move development model from the wiki to the main documentation to keep
it in sync and updated all the time and to get proper reviews.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
With the new theme we are able to have more section in the top level.
Move things around and expose the most important sections in the top
table of content.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
As mentioned in issue #12265, some APIs
aren't included in the generated
API docs because doxygengroup directives were missing. Also add a
comment referencing defgroups that are just organizational and the
scanning script can ignore.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The 'doc' build has been invoking 'project' with the argument "VERSION
${PROJECT_VERSION}". This is cargo-cult code inherited from the
toplevel build system.
This can be safely removed because in the doc build the versioning
variables that are set by 'project' are unused and PROJECT_VERSION is
not available to be de-referenced at that point in time any way ...
This fixes#12282
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
add a comment for the scanner script for missing API doxygengroup
directives so it won't complain about a parent defgroup used only for
organization
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
As mentioned in issue #12265, some networking APIs
aren't included in the generated
API docs because doxygengroup directives were missing.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
As mentioned in issue #12265, this API wasn't included in the generated
API docs because a doxygengroup directive was missing.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Move to latest cmake version with many bug fixes and enhancements.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Features:
- Uses the SPI bus to communicate with the card
- Detects and safely rejects SDSC (<= 2 GiB) cards
- Uses the optional CRC support for data integrity
- Retries resumable errors like CRC failure or temporary IO failure
- Works well with ELMFAT
- When used on a device with a FIFO or DMA, achieves >= 310 KiB/s on a
4 MHz bus
Tested on a mix of SanDisk, Samsung, 4V, and ADATA cards from 4 GiB to
32 GiB.
Signed-off-by: Michael Hope <mlhx@google.com>
Extended shell to allow command to indicate that shell should
halt not accepting any input until termination sequence is
received (CTRL+C) or shell_command_exit() is called. While shell
is in that state it is allowed to print to shell from any thread
context.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
In general driver system calls are implemented at a subsystem
layer. However, some drivers may have capabilities specific to
the hardware not covered by the subsystem API. Such drivers may
want to define their own system calls.
This macro makes it simple to validate in the driver-specific
system call handlers that not only does the untrusted device
pointer correspond to the expected subsystem, initialization
state, and caller permissions, but also that the device object
is an instance of a specific driver (and not just any driver in
that subsystem).
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Fix misspellings in documentation (.rst, Kconfig help text, and .h
doxygen API comments), missed during regular reviews.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
CMSIS RTOS API provides a generic RTOS interface for embedded
processors (actually for Cortex-M processors but are generic
enough to be used elsewhere). This header file is for V2 version.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
If burst of log messages was passed to the shell log
backend, it was likely that messages were lost because
shell had no means to control arrivals of log messages.
Added log message enqueueing timeout to the shell instance
to allow blocking logger thread if short-term arrival rate
exceeded shell capabilities.
Added kconfig option for setting log message queue size
and timeout in RTT and UART instances. Added section in
shell documentation which explains interaction between
the logger and shell instance acting as a logger backend.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Extended logger configuration to allow function name prefix for
messages with certain severity levels. By default only debug
messages are prefixed with function name.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Fix references in doxygen comments and enable util.h which has
documentation for references macros in log_core.h
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Update Kconfiglib (and menuconfig, just to sync) to upstream revision
094f4a9622046, to add the commit below.
Save existing configuration to .<filename>.old in write_config()
Add a default-True 'save_old' flag to write_config(). If 'save_old' is
True and an existing configuration file is being overwritten, a copy
of the old configuration file is saved to .<filename>.old (e.g.
.config.old) in the same directory.
Errors are ignored, as the old configuration would usually just be a
nice-to-have, and not essential.
The same functionality could be added for minimal configuration files
and headers, but it's probably most useful for configuration files.
Other changes:
- Parsing performance is improved a bit
- scripts/kconfig/kconfig.py now prints the path to the merged
configuration in zephyr/.config, to make it a bit easier to
discover.
Fixes: #2907
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Added basic working details of code/data/bss relocation feature,
how to use with examples & code sample details
Signed-off-by: Varun Sharma <varun.sharma@intel.com>
In order to clarify their use, add a brief description of the Device
Tree `aliases` and `chosen` nodes and their use in Zephyr.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Adding ninja targets based on the files that are to be copied into the
build folder doesn't seem to speed up the build, so simplify the CMake
script by relying on extract_content.py to do the copy.
Numbers on my machine:
* master
clean: 6m45.541s, 6m8.113s
incremental: 1m24.233s, 1m32.720s
* revert
clean: 6m25.221s, 6m19.751s
incremental:1m20.893s, 1m20.337s
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
API documentation (generated from doxygen comments) visibility
improvement by using a light-blue background on fields (vs. grey),
matching the Kconfig option documentation.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The newly proposed script must have report mode implemented
in them since they are less verbose warnings and helpful
in automated CI when throwing warnings to users.
Also, fixup mailing list links to follow .rst rules for
documentation using bullets while rectifying unwanted bold text.
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Updated documentation according to recent changes:
1. Removed options from the shell.
2. Simplified help usage.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Removing help "options" from shell API.
Currently SHELL_OPT macro is not used by users. What is more
commit: a89690d10f ignores possible options created in
command handler by the user. As a result they are not printed
in help message.
Second, currntly implemented "options" in command handlers options are
implemented without SHELL_OPT macro.
And last but not least this change will allow to implement
help handler in a way that user will not need to think about calling
functions printing help in a command handler.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Allow user to add externally built hex files to the cmake property
HEX_FILES_TO_MERGE. The hex files in this list will be merged
with the hex file generated when building the zephyr application.
This allows users to leverage the application configuration
available in Kconfig and CMake to help decide what hex file
should be merged with the zephyr application.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
A couple references to the old PRIMARY and SECONDARY levels were left in
place when everything moved to the new levels.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
The Sphinx ``.. only::`` directive is limited to handling only
conditional text and can't handling conditional use of directives
For example,
```
.. only:: test
.. automodule:: west.runners.core
:members:
```
is not handled. This PR monkey patches the handling of the existing
``.. only::`` directive done by Sphinx.
See https://github.com/pfalcon/sphinx_selective_exclude for details.
Licensing amended to Apache 2.0 with permission from the author.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
System Power Management is only supported in Tickless Idle mode.
This patch modifies Kconfig dependencies to ensure System Power
Management option selects Tickless Idle one.
Fixes: #11046
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
When we move DT infront of Kconfig we are going to need access to a C
toolchain before Kconfig is evaluated. This means it will not be
possible to specify the toolchain used through Kconfig.
To deal with this we ...
Drop support for specifying CROSS_COMPILE through Kconfig. Still
available is the ability to specify CROSS_COMPILE through the
environment or through a CMake variable.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
MSYS support was added as a stop-gap while native windows support was
unsupported. Now that Native windows support is stable we can drop
support for MSYS.
Dropping support for MSYS fixes#11260 and allows us to spend more
resources on native windows support.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Add a new 'Kconfig tips and best practices' page that covers some
Kconfig best practices, tips, and arcana, like the following:
- What should be turned into a Kconfig symbol?
- Best practices and pitfalls for 'select'
- Factoring out common dependencies
- Kconfig shorthands
- Redundant defaults
- Explanations of various more obscure Kconfig features, like 'imply',
optional prompts, optional choices, and 'visible if'
Link the new page in the sidebar (under Developer Guides), the
application development primer, and the architecture and board porting
guides.
Perhaps other, more Zephyr-specific information could be added later on
as well, but this is a good start.
Include some other Kconfig-related documentation improvements as well:
- In the application development primer, give 'CONFIG_FOO=n' as the way
to set a bool symbol to 'n', instead of '# CONFIG_FOO is not set'.
That seems to be what people usually do in practice in Zephyr.
Explain why '# CONFIG_FOO is not set' works as well. There's a
technical reason for it, related to Make.
- Mention that the recommended syntax for referencing environment
variables is now $(FOO) (which uses the Kconfig preprocessor)
- Mention that the kconfiglib.py docstring has more in-depth
information about how symbol values are calculated.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Changed LOG_MODULE_REGISTER and LOG_MODULE_DECLARE macros to take log
level as optional parameter. LOG_MODULE_DECLARE can now also be used
in static inline functions in headers. Added LOG_LEVEL_SET macro
which is used when instance logging API is used to indicate maximal
log level compiled into the file.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Update interrupts.rst with information on how to use dynamic
interrupts. As they are used in the same way as IRQ_CONNECT(),
not much needs to be written.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This adds macros for printing info, normal, warning and error messages
including line termination.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This allows the shell core to perform precheck before calling the
handler which then can assume the number of arguments is correct.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Explain multi-repo concepts like manifests and projects, give an
overview of the currently implemented commands, and give an example of a
potential workflow.
There's no way to submit a multi-repo change for review yet, so this is
still experimental.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Fixes broken licensing links for the cmsis, nordic, and mcux external
components. Updates the cmsis license to Apache 2.0 now that we're using
cmsis version 5.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
List the currently available Bluetooth Qualification Listings for the
Zephyr Host and Controller.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Application shared memory API uses 'appmem_' prefix for
its functions and macros. This commit updates the respective
documentation to align with the API convention.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
k_poll_signal was being used by both, struct and function. Besides
this being extremely error prone it is also a MISRA-C violation.
Changing the function to contain a verb, since it performs an action
and the struct will be a noun. This pattern must be formalized and
followed and across the project.
MISRA-C rules 5.7 and 5.9
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Using ``pip3 install --user`` installs Python packages in the Python
user install directory (``.local``) so we should remind folks to add
``~/.local/bin`` to their PATH.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
In 0d811b9aee the gcc-mulitlib package
was removed from the Ubuntu list of packages to install.
Seems this may be creating some confusion for some developers (see
comments in #10243)
Let's add it back.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
The phrase "object must have _k_object_init() on it at some point"
visibly misses "called".
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
CoAP library is migrated to support over socket based
applications or other higher layer protocols. Most of the
API's and functionality is kept as it is except few changes.
net_pkt/net_buf is removed from CoAP library. Now it expects
a pre-allocated flat buffer and length. If there is not enough
space to append any data, library simply returns an error.
It's user's responsibility to allocate and free memory.
One change in functionality is, earlier coap_pending_clear()
used to clear the memory, but now it's user's responsibility
to free the memory.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This option allows to explicitly include Segger RTT libraries and
enables use of it for various subsystems. It is disabled by
default as it consumes more RAM.
Signed-off-by: Pavel Kral <pavel.kral@omsquare.com>
Fixing a few minor typo fixes in kernel/mem_domain.c
and the respective documentation section.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
When using an IDE (e.g. Eclipse, Qt Creator), the project name gets
displayed. This greatly simplifies the navigation between projects when
having many of them open at the same time. Naming every project "NONE"
defeats this functionality.
This patch tries to use sensible project names while not duplicating
too much of what is already represented in the path. This is done by
using the name of the directory the relevant CMakeLists.txt file is
stored in. To ensure unique project names in the samples (and again, in
the tests folder) folder, small manual adjustments have been done.
Signed-off-by: Reto Schneider <code@reto-schneider.ch>
Windows requires that there are no quotes around environment variables,
remove the ones in the documentation.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The getting started guide says to run:
pip3 install -r --user zephyr/scripts/requirements.txt
but this is broken. It should be:
pip3 install --user -r zephyr/scripts/requirements.txt
This fixes#10817 and is a regression from:
0d811b9aee
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Replace sample code, making it use newest USB API, reading code
directly from sources, and changing to the simplest sample - loopback.
CDC ACM is quite big and modifying sample would render line change
quite often.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Extended logger to support optional log message prepending with
function name.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Prepend the btmgmt call with the tools/ subdirectory to line up with
the other BlueZ tool calls in the examples.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Normalize the path of ignored folders so that variations in paths
formats on Windows are detected correctly.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
- Fix a few errors and bits of stale information in "Creating an
Application", also adding additional cross-references.
- Consolidate some of the steps to help users create CMakeLists.txt
correctly by unambiguously putting target_sources() after the
boilerplate include.
- Split the description of the important build system variables into
its own section and add more context for what they do.
- Add whitespace warning
Signed-off-by: Marti Bolivar <marti@foundries.io>
Put the Developer Guides after the Getting Started guide, and make
sure the Application Development Primer is the first item in the
Developer Guides. Make some other ordering adjustments as well.
These changes collectively make for a more logical order for linearly
reading through the Zephyr documentation for the average user.
"Average user" here is defined as a person who wants to:
1. learn what Zephyr is and its distinguishing features
2. install a Zephyr development environment, building/running hello
world
3. learn the basics of how Zephyr applications are structured
4. start diving deeper
This privileges "users" over "developers", i.e. it pushes sections
related to Zephyr's internals and how to edit them down lower in the
order.
Signed-off-by: Marti Bolivar <marti@foundries.io>
The getting started documentation has become a bit of a mess over
time:
- The reader needs to jump forward and backward in the documents
depending on what their system already has installed (e.g. "start by
cloning Zephyr, oh wait, see below if you don't have Git yet" etc.).
- The operating system setup guides, toolchain setup instructions, and
application build and run information have each become their own
balkanized fiefdom, with duplicated, confusing and sometimes
inconsistent results.
- Linux documentation for all distributions is incomplete in some
places (the Arch documentation in particular is vestigial)
and wrong in others (platforms like Ubuntu still nominally require
tools, like autoconf, that haven't been necessary since we stopped
using the C Kconfig tools)
- The dependencies needed to build the documentation have
gotten *huge* since the LaTeX additions and massively overstate the
footprint of Zephyr's real dependencies. This is particularly a
problem on Linux, where those dependencies were not clearly
separated from those needed to build Zephyr.
- The toolchain setup documentation is confusing and scattered across
the main file and the platform-specific files. There are various
bits of incomplete and/or incorrect information. For example, the
docs imply that you can use the Zephyr SDK on non-Linux hosts, which
isn't true. As another example, some toolchains, such as GNU Arm
Embedded, are documented several times. As a final example, some
toolchains, such as Intel's ISSM, are squirrelled away in the
Windows document when there are Linux builds available.
Overhaul the pages to fix these issues and otherwise clean up the
language. One significant side-effect is that all the
toolchain-related information is rooted in a single toctree. Another
is that it should now be possible to follow the instructions, in
order, on any supported platform.
Signed-off-by: Marti Bolivar <marti@foundries.io>
I committed a user error and edited a file named in the sphinx output
to correct an error. To my dismay later, I discovered my work had been
lost as that file is not versioned.
Warn the others.
Signed-off-by: Marti Bolivar <marti@foundries.io>
In a clean build, Ninja is creating copies of the extracted
documentation outputs regardless of whether they already exist or
not. I can't explain this behavior from the documentation of the build
command, but it's so, even if extract_content.py is patched to use
copyfile() instead of copy2() so that outputs (copied .rst files in
the build directory) have strictly newer mtimes than inputs (source
tree .rst files).
This extra copying doesn't happen for incremental builds, for some
reason.
To account for this behavior, add and use an extract_content.py option
that skips content extraction completely and leaves that all up to the
add_custom_command() which tracks each individual input->output build
command.
Reported-by: Carles Cufi <carles.cufi@nordicsemi.no>
Signed-off-by: Marti Bolivar <marti@foundries.io>
Remove redundant 'sample' tag and add something that matches the
functionality and features being tested, demonstrated.
Avoid short abbriviations and using full names for fs.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Most of time (i.e. when just writing to .rst files or editing images,
rather than editing Doxygen or Kconfig), a full rebuild of the docs
pipeline is not necessary.
This is unfortunate, because it takes over a minute to re-run doxygen
etc. (on my system), whereas an incremental sphinx-build run should
only take a few seconds.
As a band-aid to help developers who have already generated a docs
build and know the consequences of their actions, add "sphinx-html"
and "sphinx-latex" targets. These just re-extract content files into
the build directory and run sphinx-build. This makes for much faster
documentation edit/compile/read loops.
Add some extra COMMENTs while we're here, to make it more obvious
what's going on when the docs build system crunches on something.
A "proper" solution for changing "ninja html" to have similar
performance would need, at least, to:
- only re-run doxygen if any source files have changed
- only re-generate Kconfig if any of those files have changed
That's all left to future work, as this is good enough to make
rebuilding the docs bearable for me.
Signed-off-by: Marti Bolivar <marti@foundries.io>
The logic which copies source documentation files into the build
directory could use some improvements to its dependency management, so
that when a source file changes, extract_content.py gets re-run.
Make these changes as follows:
- Add an --outputs flag to extract_content.py, so that the
sources it depends on and generates can be saved into a file and
thus made known to the build system
- Change the way the sources and destination are specified in the
extract_content.py command line so that the entire job can be done
in a single command, rather than multiple (to avoid having to
collate multiple --outputs files in CMake)
- Extract the content at configure time with execute_process(),
tracking all inputs and outputs within the build system itself. Use
this information to make sure that each individual output depends on
just its exact input file, ensuring updated inputs produce updated
outputs without having to call extract_content.py again.
- Ensure that the "content" build system target depends on all the
outputs, transitively triggering a rebuild any time an input
file (e.g. .rst documentation file or included image/source file)
changes.
Signed-off-by: Marti Bolivar <marti@foundries.io>
Separate the phases of creating the list of outputs (and output
directories) from the actual creation of these outputs. This lays the
groundwork for just printing the inputs and outputs in a subsequent
patch, enabling CMake to track dependencies properly.
In the now-separate output generation phase, use shutil.copy2() to
preserve metadata like access and modification times when possible,
rather than re-reading every file and seeing if the contents are
different. This has the same semantics but is clearer and potentially
more efficient, as the initial copies have more accurate relative
timestamps.
Signed-off-by: Marti Bolivar <marti@foundries.io>
Minor cleanups:
- Allow the user to run extract.content.py -h with ZEPHYR_BASE unset
without crashing
- Replace the use of the ZEPHYR_BUILD environment variable with an
--ignore argument (that can be given multiple times) which specifies
a path to a directory whose files should *not* be copied, and use
it to ignore the build directory
- rename, reorder, and tweak get_files() arguments a bit to go from
source to dest, with extra configuration at the end, getting rid of
local shadowing of global built-in functions
Signed-off-by: Marti Bolivar <marti@foundries.io>
Extended macro to accept flag indicating if given backend must be
initialized and enabled when log subsystem starts. Typically, simple
backends will have autostart flag set. More complex may require
explicit enabling (e.g. shell over BLE can only be enabled when
BLE connection is established).
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
User do not need to initialize shell instance manually now
and this change has been reflected in the documentation.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Document how to use harness and it's various configurations
such as type, regex and fixture that can be used to pick specific
board setup that fulfills external dependency for test case.
Signed-off-by: Praful Swarnakar <praful.swarnakar@intel.com>
The $srctree environment variable gives the path relative to which
'(o)source' statements work (the current directory is used if $srctree
is unset). It is set to $ZEPHYR_BASE in cmake/kconfig.cmake, so there's
no need to qualify the source of Kconfig.zephyr in sample Kconfig files
(or in external projects).
All 'source's in Zephyr assume that the Zephyr root directory is used as
the srctree as well, and would break otherwise.
Remove the $(ZEPHYR_BASE)s to make it clearer that all 'source'
statements work relative to the Zephyr root. There was some user
confusion on IRC.
Also explain how things work in the documentation.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Update menuconfig (and Kconfiglib, just to sync) to upstream revision
256e5b3e38e92 to get the fix below in, for an issue in an external
project. Also update genrest.py with a similar fix (the genrest issue
was what originally prompted it).
menuconfig: Improve/fix promptless choice handling
The code assumed that all parent (interface) menus always have a
prompt, which is false for items in promptless choices. This led to
a crash e.g. when viewing the symbol information for a symbol within
a promptless choice.
Promptless choices with children can show up "legitimately" when
people define choices in multiple locations to add symbols, though
this is broken in the C tools.
Use standard_sc_expr_str(node.item) instead of the non-existing
prompt for promptless choices. That way they show up as
'<choice (name if any>)>', which is consistent with how they're
shown elsewhere.
This commit also changes how choice names are displayed in
show-name/show-all mode, to the standard_sc_expr_str() format.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Extended ring buffer to allow storing raw bytes in it. API has been
extended keeping 'data item' mode untouched.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Deprecate API prefixed with sys_ring_buf_ and rename it
to ring_buf_item_ since this API is not a typical ring buffer
but ring buffer of data items (metadata + 32bit words).
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add a new optional TOOLCHAIN_ROOT cmake and environment variable to
specify an alternative location for toolchain cmake files.
When set, Zephyr will look for a toolchain cmake file located in:
${TOOLCHAIN_ROOT}/cmake/toolchain/${ZEPHYR_TOOLCHAIN_VARIANT}.cmake
Signed-off-by: François Delawarde <fnde@oticon.com>
The Zephyr configuration system uses many different files in many
different formats. It makes it a lot easier for users to understand
what these files do if when we use the correct file extensions.
To this end we rename the dts.fixup files to the correct file
extension '.h'.
This is a breaking change for out-of-tree fixup files. Such files will
be detected and given an appropriate error message.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Shell macro SHELL_DEFINE no longer needs new line character.
Specification has been updated accordingly.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Add a section to optionally install the Chocolatey packages required to
build the documentation in .pdf format on Windows.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
In order to make PDF generation work on Windows, search for a generic
Latex package and use full quotes for the latexmk environment variable.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Extending logger to support logging transient strings (with %s).
With dedicated call (log_strdup), string is duplicated to a buffer
from internal logger pool. Logger implicitly manages the pool.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The documentation has been setting the environment variable
KERNELVERSION to the PROJECT_VERSION of the documentation. But
PROJECT_VERSION is not set during the documentation build so this has
no effect.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
1. Remove old shell documentation.
2. Create documentation for new shell module.
3. Fix shell.h comments to be able to generate
API documentation.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
The board porting guide assumed that people were already familiar with
the Kconfig 'bool "foo"' shorthand for giving a symbol's type and prompt
at the same time. I got an email pointing out that it isn't obvious.
Explain the shorthand, and also mention that it's the preferred style in
Zephyr.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The following error appeared on documentation builds when enabling the
USES_TERMINAL flag:
USES_TERMINAL may not be specified without any COMMAND
This is because targets without a command should not be using the flag
at all, so remove its usage from those. Instead, use it in the
add_custom_command() that actualy invokes sphinx.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
PR #10216 hit a doxygen/breathe known issue that is worked around by
adding an entry to the doxygen configuration to treat BUILD_ASSERT() as
a predefined macro.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Update to the latest west. This includes a new 'attach' command. There
are also multi-repo commands, but those won't get exposed to the user
unless they install Zephyr using "west init" + "west fetch" (and not,
say, "git clone").
Replace the launchers; they now detect whether zephyr is part of a
multi-repo installation, and run the west code in its own repository
if that is the case.
This also requires an update to:
- the flash/debug CMakeLists.txt, as the new west package is no longer
executable as a module and must have its main script run by the
interpreter instead.
- the documentation, to reflect a rename and with a hack to fix
the automodule directive in flash-debug.rst for now
Signed-off-by: Marti Bolivar <marti@foundries.io>
Automatically detect the Kconfig file in it's conventional placement
${APPLICATION_SOURCE_DIR}/Kconfig and set KCONFIG_ROOT accordingly.
'Convention over configuration' is an imporant principle for
minimizing metadata and keeping things consistent. We use this
principle for instance with the file prj.conf.
This commit applies this principle to also re-direrct KCONFIG_ROOT.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Fixes the indentation for some code blocks and notes
through the "getting started" instructions.
The main effect is that an ordered list
is no longer broken by a note block.
Signed-off-by: Iván Sánchez Ortega <ivan@sanchezortega.es>
A blank line is needed after '.. code-block::', or the code gets
misinterpreted as RST parameters:
...doc/subsystems/logging/logger.rst:168: WARNING: Error in
"code-block" directive:
maximum 1 argument(s) allowed, 9 supplied.
.. code-block:: none
module = FOO
module-str = foo
source "subsys/logging/Kconfig.template.log_config"
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Example of st_stm32 soc tree structure was instantiating
'stm32l0' dir as subdir of 'common' which is not the case.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
With the new Kconfig preprocessor (described in
https://github.com/torvalds/linux/blob/master/Documentation/kbuild/
kconfig-macro-language.txt), the syntax for expanding environment
variables is $(FOO) rather than $FOO.
$(FOO) is a general preprocessor variable expansion, which falls back to
environment variables if the variable isn't set (like in Make). It can
also be used in prompts, 'comment's, etc.
The old syntax will probably be supported forever in Kconfiglib for
backwards compatibility, but might as well make it consistent now that
people might start using the preprocessor more.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The prefixes might be a leftover from the old 'option env="..."' symbols
(which are no longer needed). Since environment variables can be
referenced directly now, there's no point in having a prefix.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This converts the http links within the Zephyr document
into references. This allows the links within the PDF file
to jump to the correct sections instead of going to
the Internet.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The chain of dependencies works for make but not for Ninja.
Make it explicit so Ninja will work to generate PDF.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Rather than having some implied name for the logging name, explicitly
pass it in the macros LOG_MODULE_REGISTER & LOG_MODULE_DECLARE.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Instead of documenting in rst, pull the API from USB Device Core Layer
header.
Fixes: #5702
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Fixes issue with USB subsystem doc not pulling from header
doxygen comments of USB Device Controller code.
Fixes: #5702
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Fixed misspellings, Synopsis DesignWare references, move Synopsys nSIM
support to boards/SoC section.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
This commits adds detailed description of Armv8-M features that
are introduced in the 1.13 release.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit includes the basic support for ARM TrustZone-M
in the list of key features for 1.13 release.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Some distros set the environment variable CFLAGS, this will
accidentally affect Zephyr builds.
To fix this we clear the environment variable from within the Zephyr
build system for the duration of the CMake execution.
Until now we have been instructing the user to clear it, but it is
easier for the user if we clear it for him.
The same applies to CXXFLAGS.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Add the relevant highlights from the 1.13 development cycle for the
Bluetooth subsystem and its samples.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This removes these network sample applications
samples/net/coaps_client
samples/net/coaps_server
as they are using low level mbedtls APIs. You should use
preferably socket based or net-app based applications.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Merged closely related items into one bullet point, improve
description of some items, try to sort items a bit better
(that can be further improved).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Make the multi-level interrupts diagram more clear by saying:
- the "-" means an interrupt slot
- all interrupt slots are numbered from 0 starting from right most
- alphabets denote devices
- add an example chain for device D
Signed-off-by: Yasushi SHOJI <y-shoji@ispace-inc.com>
This adds new targets to generate build documentation through
LaTEX to PDF.
There are a few notes:
1. pdflatex complains about the tex file generated by doxygen
so it needs to be fixed with a Python script before feeding
in through pdflatex.
2. SVG files are not recognized by pdflatex so they are converted
to known good format on the fly, only for producing PDF. This
uses the libRSVG's rsvg-convert tool.
Relates to #6782.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Update Kconfiglib and menuconfig to upstream revision a28bc4da9762e,
which adds include path information to menuconfig, showing how the
Kconfig file of the symbol got 'source'd in addition to showing the
definition location.
Add include path information to the auto-generated Kconfig documentation
too.
Some small Kconfiglib bugs are fixed to, like error reporting for
recursive 'source's being broken (crashing instead of printing the
error), a minor file descriptor leak, and syntax checking not catching
extra trailing tokens after 'if <expr>' and 'depends on <expr>'.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Support using an alternate QEMU path for when we want to use a qemu
version not available in the SDK.
To use the alternate qemu version, export QEMU_BIN_PATH and point it
to the bin directory which contains the qemu executables.
For example:
export QEMU_BIN_PATH=/usr/local/bin
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move to more generic tracing hooks that can be implemented in different
ways and do not interfere with the kernel.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Previously, you had to go to the Kconfig dump at the bottom of the
symbol reference page to see selected symbols (as opposed to the
select*ing* symbols, which were already listed). Might be easy to miss.
Use a format similar to the list of defaults
('- SELECTED_SYM if CONDITION').
Also list 'imply's, though I don't think those are used anywhere in
Zephyr yet.
Simplify the code generating the list of selecting symbols a bit as
well.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Due a design goof, the top-level Kconfig file passed to
Kconfig.__init__() wasn't looked up relative to $srctree. This broke a
planned fix for an issue with the CI check for references to undefined
Kconfig files in external projects.
Update Kconfiglib to upstream revision 953cc12464 to fix it.
Also update doc/CMakeLists.txt to pass 'Kconfig' instead of '../Kconfig'
to genrest.py. $srctree is already set to $ZEPHYR_BASE.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
In order to be able to place the generated HTML content directly in a
folder of the user's choice, make the Sphinx HTML output folder
configurable.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Rather than having some implied name for the logging name, explicitly
pass it in the macros LOG_MODULE_REGISTER & LOG_MODULE_DECLARE.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
These work like def_bool, setting the type and adding a default at the
same time. This extension fixes some Kconfig inconsistency.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
A design flaw of 'gsource' is that there's no way to require at least
one file to match the glob pattern. This could lead to silent errors.
Switch to a new design, where a plain 'source' is globbing and requires
at least one file to match. A separate 'osource' (optional source)
statement is available for cases where it's okay for a pattern (or plain
filename) to not match any files.
'orsource' combines 'osource' and 'rsource' (relative source).
This commit search-replaces 'gsource' with 'source', but backwards
compatibility with 'gsource' is still maintained by making it an alias
for 'osource' (and by making 'grsource' an alias for 'orsource').
The three Kconfig files arch/{nios2,posix,xtensa}/Kconfig source
arch/{nios2,posix,xtensa}/soc/*/Kconfig, which doesn't match any files.
Use 'osource' for those. The soc/*/Kconfig files seem to be for
additional SoC-specific symbols, only none exist yet on those ARCHes.
Also use 'osource' for the source of $ENV_VAR_BOARD_DIR/Kconfig in
boards/Kconfig, which doesn't exist for all boards.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Document that the boilerplate code included in all applications must
now also include
cmake_minimum_required(VERSION 3.8.2)
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Use the new Kconfiglib expression printing customization functionality
to get rid of the hacky expr_str() overriding.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This finishes refactor of splitting off net_config library name from
net_app library, started in c60df1311, c89a06dbc. This commit makes
sure that Kconfig options are prefixed with CONFIG_NET_CONFIG_
instead of CONFIG_NET_APP_, and propagates these changes thru the
app configs in the tree.
Also, minor dependency, etc. tweaks are made.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
CMSIS RTOS API provides a generic RTOS interface for embedded
processors (actually for Cortex-M processors but are generic
enough to be used elsewhere). This header file is for V1 version.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
On flash NVS was stored one entry after another including the metadata
of each entry. This has the disadvantage that when an incomplete write
is performed (e.g. due to power failure) the complete sector had to be
rewritten to get a completely functional system.
The present rewrite changed the storage in flash of the data. For each
sector the data is now written as follows: the data itself at the
beginning of the sector (one after the other), the metadata (id, length,
data offset in the sector, and a crc of the metadata) is written from
the end of the sector. The metadata is of fixed size (8 byte) and for
a sector that is completely occupied a metadata entry of all zeros is
used.
Writing data to flash always is done by:
1. Writing the data,
2. Writing the metadata.
If an incomplete write is done NVS will ignore this incomplete write.
At the same time the following improvements were done:
1. NVS now support 65536 sectors of each 65536 byte.
2. The sector size no longer requires to be a power of 2 (but it
still needs to be a multiple of the flash erase page size).
3. NVS now also keeps track of the free space available.
Signed-off-by: Laczen JMS <laczenjms@gmail.com>
The nvs module has some disadvantages for larger block size. The data
header and slot are taking up to much space. A rewrite is proposed that
reduces the used storage space for systems with write block size > 4.
The data storage in flash is now one unit consisting of: data_length,
data_id, data and data_length again in a multiple of the write block
size. The data_length at the end is used to validate the correctness of
the flash write and also allows to travel backwards in the filesystem.
As a comparison, on a system with block size 8 byte, a 32 bit values
now fits 1 block including the metadata (length and id). This used to
be 3 blocks.
The data_length will occupy 1 byte if the data length is less than 128
byte, it will occupy 2 byte if the data length is 128 byte or more. The
data length is limited to 16383 byte.
Each write to flash is verified by a read back of the data.
The read performance is improved because reading is done backwards so
the latest items are found first.
When the filesystem is locked it can be unlocked by calling
reinit(), this will clear flash and setup everything for storage.
add sample documentation - README.rst
Update dtsi to include erase_block_size, use erase_block_size in sample
Update prj.conf to include CONFIG_MPU_ALLOW_FLASH_WRITE
Signed-off-by: Laczen JMS <laczenjms@gmail.com>
Update the documentation to say that earlier defaults are preferred,
while explaining Kconfig.defconfig files.
Keep the section that covered the Zephyr prefer-later-defaults patch as
documentation for the behavior having changed. It will be linked in a
warning later.
Also add documentation explaining how to configure choices, including
using multiple definition locations to change a choice 'default'.
Document that 'range's can be added/overriden as well. This works
reliably now.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The old GCC ARM Embedded website on launchpad
(https://launchpad.net/gcc-arm-embedded) has been superseeded by the new
GNU Arm Embedded one
(https://developer.arm.com/open-source/gnu-toolchain/gnu-rm).
This also means a change of name from "GCC" to "GNU". Reflect this in
the enviroment variables so that the proper term is used henceforth.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This PR removes use of the customized zephyr_docs_theme, replacing it
with the new read_the_docs theme. It ignores the tags that were
previously used to switch the theme for "development" vs. "daily" or
"release" and always uses the RTD theme. (The "daily" vs. "release" is
still honored to change the breadcrumb and doc version to "latest" if
"daily" is specified (as we did for the current doc build process),
otherwise it uses the version extracted from the
VERSION file in the source code (as would be appropriate for the docs
for a tagged release.)
This also pulls in using template extensions for breadcrumb and the
notice about latest having more up-to-date content when the "release"
tag is set.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Flashing support was added to the jlink runner in commit
9f57d11d9b, but the OpenSDA document
wasn't updated accordingly. Update it now.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
There was a remaining reference to a doc/Makefile that needed
to be changed to CMakeLists.txt
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The LLDP protocol defines 2 separate agents, the Transmitters and
the Receivers. For the context of Zephyr, we are only interested in
the Tx agent, thus we drop any LLDP frames received by Zephyr.
LLDP frames are basically composed by an ethernet header followed by
the LLDP Protocol Data Unit (LLDPDU). The LLDPDU is composed by several
TLVs, some of them being mandatory and some optional.
Our approach here is having TLVs fully configured from Kconfig, thus
having the entire LLDPDU constructed on build time.
The commit adds NET_ETH_PTYPE_LLDP definition and related handling.
If CONFIG_NET_LLDP is enabled then ethernet_context has a pointer to
the struct net_lldpdu that belongs to that ethernet interface. Also
when CONFIG_NET_LLDP is enabled, the LLDP state machine will start to
send packets when network interface is coming up.
Currently the LLDP state machine is just a k_delayed_work() sending the
LLDPDU at a given period (defined by CONFIG_NET_LLDP_TX_INTERVAL).
Fixes#3233
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Since we're now copying the whole doc/ folder into the output folder,
there's no need anymore to copy certain files by hand.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
To avoid having to refer to non-rst files artificially in order to get
them copied into the destination folder, make a raw full copy of the
doc/ folder instead of copying only the .rst files.
Fixes#9128
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Table captions and figure captions, by default, appear in different
locations. Move table captions below the table to match figures.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The runtime filters (both aggregated and per-backend) are all getting
initialized to the default level CONFIG_LOG_DEFAULT_LEVEL. This is not
correct behavior: the initial runtime setting for each source ID
should match its compile-time level setting.
Otherwise, setting CONFIG_LOG_RUNTIME_FILTERING=y changes the logging
behavior for messages that pass the compile time filter check, but not
the runtime check (this currently happens when LOG_LEVEL=4, since
CONFIG_LOG_DEFAULT_LEVEL=3).
Fix this by initializing all filters to their module's compile time
settings. Also make sure that filters are set up before backends are
activated, to avoid race conditions.
Fix a stray documentation typo while we are here.
Signed-off-by: Marti Bolivar <marti@foundries.io>
The documentation says a module can be split up over multiple files,
but there's no good way to do that. In the file with the
LOG_MODULE_REGISTER() call, the definitions of the module's state
variables serve as declarations that LOG_DBG(), etc. can use. But in
other files making up the module, no such declarations are available,
and the macro expansion bombs out spectacularly and confusingly.
Fix this by adding a LOG_MODULE_DECLARE() macro which other files in
the module can use to declare the internal state used by the log
module, so that LOG_DBG() etc. work properly.
Keep the documentation up to date.
Signed-off-by: Marti Bolivar <marti@foundries.io>
Modified the web page to make it direct and easier to understand.
Major changes being the selection of the directory in the Zephyr SDK
Installation and a Note added for the '.zephyrrc' to include the SDK
installation location if not default.
Minor changes involving the elimination of repeated use of same sentence
with different Host OS and indentation correction in the Fedora section
since it showed up in 'white text' rather than code block.
SDK's '.zephyrrc' documentation needed to have the default location and
the user defined location
Signed-off-by: Arjun Warty <arjun.warty@nxp.com>
Replace the current title with an image containing the Zephyr logo for
the root README.rst, in order to make the GitHub landing page more
attractive.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The SDK has been packaged for Arch Linux and can be found
in Arch User Repository. Update the docs to make this known.
The package is useful because by installing it the user
gets all dependencies automatically installed.
Signed-off-by: Alexei Colin <ac@alexeicolin.com>
Change logo and increase logo size, remove RTD links to github source,
add CSS for :kbd: role (keyboard key press), change logo link to project
home rather than doc home (via zephyr-custom.js). Update 404 error page
for wider page layout, force page break before footer, show URL that got
you to the 404 page.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Simplify the CONTRIBUTING file seen when submitting a PR, make
references to the full contributing documentation, and merge the
contributing non-apache licensed material.
fixes: #6188
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
pyocd recently added support for python 3 so we can now remove the
python 2 package requirements. It also merged Zephyr thread awareness
upstream, so we can remove the reference to my pyocd pull request.
Tested debugging and flashing on Linux and Windows.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Add infrastructure for switching production documentation to use the
cleaner read_the_docs theme as noted in issue #6774. This change won't
affect the current "daily" or "release" builds but will change local
builds that previously also used the RTD theme, but now have the version
selection capability added.
This PR also adds the Zephyr logo and favicon to the RTD-themed docs,
and moves the top level images into an images/ folder.
Note that issue #9128 requires workaround.rst to force a reference to
files needed for the build but not directly referened in a .rst file.
(When #9128 is fixed, we can remove this workaround.rst.)
Once merged and tested, we'll tweak the conf.py to use the RTD theme
for all doc builds (e.g, when DOC_TAG=daily or release) in a subsequent
PR.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Similar to #8042, doxygen has issues with function macros (those that
don't end with a semicolon). Workaround is to have doxygen treat these
as predefined by the doxygen preprocessor. Fixes a problem showing up
in PR #9140.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Summary: revised attempt at addressing issue 6290. The
following provides an alternative to using
CONFIG_APPLICATION_MEMORY by compartmentalizing data into
Memory Domains. Dependent on MPU limitations, supports
compartmentalized Memory Domains for 1...N logical
applications. This is considered an initial attempt at
designing flexible compartmentalized Memory Domains for
multiple logical applications and, with the provided python
script and edited CMakeLists.txt, provides support for power
of 2 aligned MPU architectures.
Overview: The current patch uses qualifiers to group data into
subsections. The qualifier usage allows for dynamic subsection
creation and affords the developer a large amount of flexibility
in the grouping, naming, and size of the resulting partitions and
domains that are built on these subsections. By additional macro
calls, functions are created that help calculate the size,
address, and permissions for the subsections and enable the
developer to control application data in specified partitions and
memory domains.
Background: Initial attempts focused on creating a single
section in the linker script that then contained internally
grouped variables/data to allow MPU/MMU alignment and protection.
This did not provide additional functionality beyond
CONFIG_APPLICATION_MEMORY as we were unable to reliably group
data or determine their grouping via exported linker symbols.
Thus, the resulting decision was made to dynamically create
subsections using the current qualifier method. An attempt to
group the data by object file was tested, but found that this
broke applications such as ztest where two object files are
created: ztest and main. This also creates an issue of grouping
the two object files together in the same memory domain while
also allowing for compartmenting other data among threads.
Because it is not possible to know a) the name of the partition
and thus the symbol in the linker, b) the size of all the data
in the subsection, nor c) the overall number of partitions
created by the developer, it was not feasible to align the
subsections at compile time without using dynamically generated
linker script for MPU architectures requiring power of 2
alignment.
In order to provide support for MPU architectures that require a
power of 2 alignment, a python script is run at build prior to
when linker_priv_stacks.cmd is generated. This script scans the
built object files for all possible partitions and the names given
to them. It then generates a linker file (app_smem.ld) that is
included in the main linker.ld file. This app_smem.ld allows the
compiler and linker to then create each subsection and align to
the next power of 2.
Usage:
- Requires: app_memory/app_memdomain.h .
- _app_dmem(id) marks a variable to be placed into a data
section for memory partition id.
- _app_bmem(id) marks a variable to be placed into a bss
section for memory partition id.
- These are seen in the linker.map as "data_smem_id" and
"data_smem_idb".
- To create a k_mem_partition, call the macro
app_mem_partition(part0) where "part0" is the name then used to
refer to that partition. This macro only creates a function and
necessary data structures for the later "initialization".
- To create a memory domain for the partition, the macro
app_mem_domain(dom0) is called where "dom0" is the name then
used for the memory domain.
- To initialize the partition (effectively adding the partition
to a linked list), init_part_part0() is called. This is followed
by init_app_memory(), which walks all partitions in the linked
list and calculates the sizes for each partition.
- Once the partition is initialized, the domain can be
initialized with init_domain_dom0(part0) which initializes the
domain with partition part0.
- After the domain has been initialized, the current thread
can be added using add_thread_dom0(k_current_get()).
- The code used in ztests ans kernel/init has been added under
a conditional #ifdef to isolate the code from other tests.
The userspace test CMakeLists.txt file has commands to insert
the CONFIG_APP_SHARED_MEM definition into the required build
targets.
Example:
/* create partition at top of file outside functions */
app_mem_partition(part0);
/* create domain */
app_mem_domain(dom0);
_app_dmem(dom0) int var1;
_app_bmem(dom0) static volatile int var2;
int main()
{
init_part_part0();
init_app_memory();
init_domain_dom0(part0);
add_thread_dom0(k_current_get());
...
}
- If multiple partitions are being created, a variadic
preprocessor macro can be used as provided in
app_macro_support.h:
FOR_EACH(app_mem_partition, part0, part1, part2);
or, for multiple domains, similarly:
FOR_EACH(app_mem_domain, dom0, dom1);
Similarly, the init_part_* can also be used in the macro:
FOR_EACH(init_part, part0, part1, part2);
Testing:
- This has been successfully tested on qemu_x86 and the
ARM frdm_k64f board. It compiles and builds power of 2
aligned subsections for the linker script on the 96b_carbon
boards. These power of 2 alignments have been checked by
hand and are viewable in the zephyr.map file that is
produced during build. However, due to a shortage of
available MPU regions on the 96b_carbon board, we are unable
to test this.
- When run on the 96b_carbon board, the test suite will
enter execution, but each individaul test will fail due to
an MPU FAULT. This is expected as the required number of
MPU regions exceeds the number allowed due to the static
allocation. As the MPU driver does not detect this issue,
the fault occurs because the data being accessed has been
placed outside the active MPU region.
- This now compiles successfully for the ARC boards
em_starterkit_em7d and em_starterkit_em7d_v22. However,
as we lack ARC hardware to run this build on, we are unable
to test this build.
Current known issues:
1) While the script and edited CMakeLists.txt creates the
ability to align to the next power of 2, this does not
address the shortage of available MPU regions on certain
devices (e.g. 96b_carbon). In testing the APB and PPB
regions were commented out.
2) checkpatch.pl lists several issues regarding the
following:
a) Complex macros. The FOR_EACH macros as defined in
app_macro_support.h are listed as complex macros needing
parentheses. Adding parentheses breaks their
functionality, and we have otherwise been unable to
resolve the reported error.
b) __aligned() preferred. The _app_dmem_pad() and
_app_bmem_pad() macros give warnings that __aligned()
is preferred. Prior iterations had this implementation,
which resulted in errors due to "complex macros".
c) Trailing semicolon. The macro init_part(name) has
a trailing semicolon as the semicolon is needed for the
inlined macro call that is generated when this macro
expands.
Update: updated to alternative CONFIG_APPLCATION_MEMORY.
Added config option CONFIG_APP_SHARED_MEM to enable a new section
app_smem to contain the shared memory component. This commit
seperates the Kconfig definition from the definition used for the
conditional code. The change is in response to changes in the
way the build system treats definitions. The python script used
to generate a linker script for app_smem was also midified to
simplify the alignment directives. A default linker script
app_smem.ld was added to remove the conditional includes dependency
on CONFIG_APP_SHARED_MEM. By addining the default linker script
the prebuild stages link properly prior to the python script running
Signed-off-by: Joshua Domagalski <jedomag@tycho.nsa.gov>
Signed-off-by: Shawn Mosley <smmosle@tycho.nsa.gov>
Added macro trick which evaluates macro when used and not
when header file is included. After this change order of
defining LOG_LEVEL and including log.h is no longer fixed.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The following changes have been made to support out-of-tree builds:
* In order to avoid using relative hardcoded paths, use CMake's
configure_file() to replace the paths in the doxygen input file
so that the output directory is set correctly.
* All .rst and additional required files are now copied from the doc/
folder into the build/rst folder using extract_content.py. The
samples/ and boards/ folder are copied twice (once into build/rst
and another into build/doc/rst) to manage relative paths.
* All paths are absolute where possible, including themes and static
content.
This patch ensures that the Zephyr repo is not contaminated by the
build at all.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
In order to make things simpler for the user, remove the
`--user` flag when invoking pip and pip3 so that executables are placed
in the <Python>\Scripts folder, which is added to the PATH
automatically.
Additionally clarify and clean up the documentation tools section.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
When using Ninja, output will be buffered until the command completes
unless USES_TERMINAL is used. Use USES_TERMINAL here so that output is
sent directly to the terminal without having to wait. This is a bit of
an abuse of the Ninja console pool, but for building documentation this
should not be an issue since it's a self-contained CMake project.
Note that this is done conditionally, only when Sphinx output is not
disabled by using its "-q" flag.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This expands the Development Environment Setup on Linux guide to
include instructions for Clear Linux.
Tested on Clear Linux build 23610.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Documenting new logger features: waking up processing thread
and internal logger processing thread.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
In order to build the documentation one needs Doxygen. Now that building
the documentation is supported on Windows, include this package.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
In order to be able to use this CMakeLists.txt file from other projects,
use the proper variables so that they refer to their own paths.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Fix the way a list is constructed during argument parsing so that CMake
propagates the options correctly to Sphinx.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Move options to the place they belong ([OPTIONS] SOURCEDIR OUTPUTDIR)
according to sphinx itself.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The filter-doc-log.sh script is no longer used since its functionality
has been moved to the CMakeLists.txt and filter-known-issues.py.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Now that CMake is supported for building the docs, adapt the
instructions to build the documentation to the new mechanism and also
adapt the root-level Makefile to support building using CMake.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add a new CMakeLists.txt that is capable of building the documentation.
Note that the error checkin currently only works on Unix platforms since
it's tied to a shell script.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add TSN (Time Sensitive Networking) description to networking
overview document. Also make sure that gPTP documents are linked
together properly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
"Getting Started" does not clearly state how to use a custom cross
compiler. This patch adds a new section "Using Custom Cross
Compilers" to it.
To support users without SDK, we have the section "Building without
the Zephyr SDK". But the section is all about prebuilt tools in the
SDK but not build process. This patch adds two pointers "Using 3rd
Party Cross Compilers" and "Using Custom Cross Compilers" pointing to
the actual building process, and let those section describe
ZEPHYR_TOOLCHAIN_VARIANT, which is cross compilers dependent variable.
The patch also clarify what a 3rd party cross compiler is and what a
custom compiler is.
Signed-off-by: Yasushi SHOJI <y-shoji@ispace-inc.com>
Added a new command line options to sanitycheck:
--enable-coverage which will compile for native_posix
with CONFIG_COVERAGE set, and unit tests accordingly.
+
Now -C --coverage implies also --enable-coverage.
Background:
After 608778a4de
it is possible to add Kconfig options from command
line during the cmake invocation.
So we can use it to set CONFIG_COVERAGE for the native_posix
target when we need to instead of relaying on it always
being compiled with coverage enabled.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Add gPTP information to documentation.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Julien Chevrier <julien.chevrier@intel.com>
Introduct the ways to debugging and downloading using JLink tools on
stm32 boards if had convented ST-Link On-Board into a JLink.
Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
It's common for people to put in a 'default n' "just in case", because
it might not be obvious that bool symbols implicitly default to 'n'. To
make it clearer, mention the implicit default value on the reference
pages of symbols without defaults.
Also mention that choices without defaults default to the first
(visible) symbol in the choice.
Note: Adding to the confusion, Kconfig used to generate a
'# CONFIG_FOO is not set' line for 'default n', but no output when there
was no default. I changed that recently in both the C tools and
Kconfiglib. There's no output either case now (unless the symbol is
visible).
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Try to clarify the scope of Device Tree vs Kconfig in order to allow
Zephyr users to identify where a particular configuration option when
developing an application, board support or SoC support.
Fixes#7230
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Certain external requirements require justification that threats in a
threat model have been satisfied. In order to do this, the threats must
be enumerated, and given labels.
Add labels to the threats. Use rts's citation model to allow the
threats to be grouped and listed at the end of the document to help with
cross referencing.
Signed-off-by: David Brown <david.brown@linaro.org>
This resolves#5723 by adding support for assigning to Kconfig options
from the CMake CLI.
CMake CLI Kconfig options can be specified like so:
'cmake -DCONFIG_ASSERT=y'
The lifetime of such an option is the same as the lifetime of a CMake
cache variable, and in principle any method of populating the
CMakeCache could be used, such as cmake-gui.
This has been implemented by scanning the CMakeCache variables before
Kconfig is executed and writing any that are prefixed with 'CONFIG_'
to a new Kconfig fragment in the build directory that is merged in
with a high precedence.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The genrest.py script (used to create the Kconfig configuration option
documentation) was depending on the environment's locale settings to
properly handle UTF-8 character encoding in the reST files it creates.
When we reused this script for another project, that environment's
LC_CTYPE was set to C, telling Python to use ASCII as the (default)
encoding. This patch is a prophylactic measure to prevent potential
failures by adding the encoding option on the open() calls.
It also includes a small tweak to the introduction.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Improve error reporting to include the filename being processed when a
problem occurs during a pre-generation phase when boards and samples
files are temporarily copied (by doc/scripts/extract_content.py) into
the documentation area for processing.
Two recent problems were noticed:
Some new files were using window-1252 encoding and included windows
printer quote marks and hyphens, for example 0x92 in window-1252
encoding is Unicode 0x2019 for 'RIGHT SINGLE QUOTATION MARK'.
An image file reference by a reST file was missing
Both of these threw an exception reporting the error, but did not
include any information about the file currently being processed, making
it hard to fix the problem (e.g., change the Windows right quote
character to an ASCII ').
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
With the update to Sphinx, we no longer need to provide our own updated
version of jquery.js (update is now part of the Sphinx release).
See #5591 and #5618
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Update the doc build tools versions listed in requirements.txt (and
mentioned in the doc building instructions).
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Update the application documentation to discuss the new ability to
use semicolons as separators when there are multiple files. Enabling
semicolon separators also enables CMake lists to manipulate CONF_FILE
from the application side.
Signed-off-by: Michael R Rosen <michael.r.rosen@intel.com>
Doxygen has issues with function macros (those that don't end with a
semicolon). Workaround is to have doxygen treat these as predefined by
the doxygen preprocessor.
Fixes: #7367
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Until now, choices have kinda been a black box in the Kconfig reference,
and hid the dependencies of choice symbols (because choice symbols
depend directly on the choice rather than on whatever the choice
'depends on').
Generate separate information pages for choices and turn <choice>
dependencies into links.
One complication is that choices (usually) don't have names. Use the
index of each choice in the Kconfig files (first choice seen = choice 0,
then choice 1, etc.) instead to identify each choice.
Choice reference pages include the same information as symbol reference
pages (minus some things that don't apply for choices), and also list
the choice symbols contained in the choice.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Only used to add some prereqs to the 'json' target. Put the prereqs
directly on the 'json' target instead.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Identical with the 'doxy' target. Move the 'doxy-code' recipe over to
'doxy' and remove 'doxy-code'.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
CONFIG_SHELL seems to be some autoconf thing
(https://www.gnu.org/software/autoconf/manual/autoconf.html). Maybe this
was meant to be SHELL, which Make looks at. Would probably be rare to
run a non-compatible shell here though.
CONFIG_SHELL isn't exported, so it isn't visible to the recursive make
invocations ($(MAKE) -C ...) either.
Remove it.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Removes the "draft" tag from the 1.12 release notes and adds a 1.12 link
on the release notes page. Adds a link to the 1.12 docs on the home
page.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This covers its design and scope, and provides usage and some
implementation documentation on the existing flashing and debugging
commands.
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
We need this to be able to pull in its API documentation.
This will need modifications when multi-repo support is available, in
order to get the imports from the independent West repo, but for now
just use the copy in Zephyr.
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
The directive is not generating the right "mkdir" steps when used with
the :app: option. Fix it.
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
The building and running section is out of date, as Windows and macOS
commands are available now.
It also has some accuracies:
- the following section describes how to build hello_world, not how to
make a new application based on it
- zephyr-env scripts do more than just set project-specific
environment variables (they modify PATH on Unix, and may run
arbitrary RC scripts on all platforms)
Fix these issues.
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
Commas are needed before coordinating conjunctions joining independent
clauses. Two backticks are needed for teletype fonts.
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
Now that the instructions work on Windows, delete a reference to
~ (the user's home on a Unix system) in the text.
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
This patch removes the revision history from the security overview
document. With this file being maintained in git, there is no need
for an additional in-document revision history table.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch revises the security overview document to bring the
information pertaining to stack protection, thread separation,
and memory protection up to date with the current state of the
software releases.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Fills in the summary section with roadmap features added in the 1.12
release. Fills in the architectures and kernel sections with notable
additions and changes.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Sphinx defaults to Python highlighting, but a Kconfig lexer is available
as well
(http://pygments.org/docs/lexers/#pygments.lexers.configs.KconfigLexer).
Use it.
This only highlights Kconfig definitions without links (references to
other symbols), as Sphinx doesn't highlight '.. parsed-literal::' blocks
with links. It's an improvement over Python stuff getting highlighted at
least.
Side note: '.. highlight:: none' still gives '.. parsed-literal::'
blocks without links a different background color, for whatever reason.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Fills in the boards, drivers, build, and hals subsections with major
additions and changes in the 1.12 release.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Updated doc for release 1.12 for :-
Kernel:
Added k_thread_foreach API
Libraries / Subsystems:
subsys/disk: Added support for multiple disk interfaces
subsys/fs: Added support for multiple instances of filesystem
subsys/fs: Added Virtual File system Switch (VFS) support
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Add a doc to the security section enumerating a threat model for a
sensor-type device. This will help the direction of work to meet these
security requirements for this particular application.
Signed-off-by: David Brown <david.brown@linaro.org>
Noticed in docs.zephyrproject.org/subsystems/test/sanitycheck.html that
the first column of the option table display is too narrow (for short
option names that are shown on the same line as the description). This
PR tweaks the CSS to widen the first column enough to stop wrapping in
most cases.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Add special command @req to reference requirements. This will help with
traceability between tests and requirements using doxygen.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This patch adds a set of priorities at the (numerically) lowest end of
the range which have "meta-irq" behavior. Runnable threads at these
priorities will always be scheduled before threads at lower
priorities, EVEN IF those threads are otherwise cooperative and/or
have taken a scheduler lock.
Making such a thread runnable in any way thus has the effect of
"interrupting" the current task and running the meta-irq thread
synchronously, like an exception or system call. The intent is to use
these priorities to implement "interrupt bottom half" or "tasklet"
behavior, allowing driver subsystems to return from interrupt context
but be guaranteed that user code will not be executed (on the current
CPU) until the remaining work is finished.
As this breaks the "promise" of non-preemptibility granted by the
current API for cooperative threads, this tool probably shouldn't be
used from application code.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Turn 'content', 'kconfig', and 'prep' into phony targets so that the
docs can be built even if there is a file called e.g. 'kconfig' in
zephyr/doc/.
Also remove the Python scripts as prerequisites from the rules and
reference them directly in the recipes instead. The phony targets are
always "out-of-date", and there are no rules to run for the Python
scripts themselves.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Make all menu paths ("(top menu) -> menu -> submenu -> ...") exclude
implicit submenus, which are shown indented in the menuconfig interface
and are created when items depend on the symbol before them.
Previously, implicit submenus were excluded in the menu path at the top
of the menuconfig interface, but were included in the menuconfig symbol
information dialog and in the docs generated by genrest.py.
This makes it consistent, and un-spams the documentation for some
symbols a bit.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
i.MX7 updated doc sections for Zephyr release 1.12:
Architectures:
nxp_imx/mcimx7_m4: Added support for i.MX7 Cortex M4 core
Boards:
colibri_imx7d_m4: Added support for Toradex Colibri i.MX7 board
Drivers and Sensors:
serial: Added support for i.MX UART interface
gpio: Added support for i.MX GPIO
HALs:
nxp/imx: imported i.MX7 FreeRTOS HAL
Signed-off-by: Diego Sueiro <diego.sueiro@gmail.com>
Updated doc for release 1.12 for :-
1. Added device tree support for nios2 based boards.
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
Leading/trailing whitespace in prompts requires ugly workarounds in
genrest.py, as e.g. *prompt * is invalid RST. strip() all prompts in
Kconfiglib and get rid of the genrest.py workarounds. Add a warning too.
The Kconfiglib update has some unrelated cleanups and fixes (that won't
affect Zephyr).
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
add a comment so the script for checking undocumented defgroups doesn't
report this internal API as not documented
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Inspired by #7666, I scanned for other doxygen defgroups that weren't
mention in the documentation and found these:
vlan (defined in net/ethernet_vlan.h)
ieee802154_mgmt (defined in net/ieee802154_mgmt.h)
ethernet_mgmt (defined in net/ethernet_mgmt.h)
Added these to networking .rst, and also added one more level to the
toctree directive to show these nested groups in the table of contents.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Sphinx only displays API documentation for items within the specified
doxygen defgroup, and importantly, not the subgroups of this defgroup.
If you define a defgroup with defgroup children, you need to tell Sphinx
to display API information about the child defgroups too. (If the
parent defgroup has no entities of it's own, you can leave that out.)
This patch replaces the (empty) display of the parent defgroup with that
of its two child defgroups.
It also fixes an unnecessarily long text line while I was in there.
Fixes: #7666
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Skip writing index and symbol RST files whose content hasn't changed, to
avoid updating their timestamps. This makes documentation rebuilds much
faster, as Sphinx looks at the timestamp to determine if an RST file has
been updated.
Rebuilding docs with symbol reference up-to-date, before:
$ time make html
real 4m52.838s
user 4m46.242s
sys 0m4.249s
After:
$ time make html
real 0m48.731s
user 0m47.571s
sys 0m0.908s
Testing was done with 'make VERBOSE=1 SPHINXOPTS= html', suggested by
Marti Bolivar.
Piggyback a small cleanup to the code generating the select/imply
information.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Previously, symbols defined in multiple locations (e.g.,
Kconfig.defconfig symbols) would incorrectly get all their defaults,
selects, implies, and ranges displayed on the first definition.
This commit uses the Kconfiglib functionality added in 53af8db920066
("kconfiglib: Record which MenuNode has each property") to show such
symbols with all properties in the right location.
The definitions are now listed one-by-one, with the filename/linenr
displayed before each definition. The menu path (e.g.,
'(top menu) -> Device Drivers') is now listed for each definition as
well.
Fixes: #6879
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This commit gets rid of the 'option env="ENV_VAR"' bounce symbols.
"$FOO" now expands directly to the value of the environment variable
FOO, instead of to the value of the Kconfig symbol FOO.
This change is likely to soon appear in the C tools as well. Those
'option env' symbols always seemed kinda pointless, and have broken
dependency handling due to forcing symbol evaluation during parsing,
before all the symbols have even been seen.
Compatibility with the C tools could be retained by naming all
'option env' symbols the same as the environment variable they
reference.
This commit also updated the Zephyr documentation to explain the new
behavior. It's relevant for $ZEPHYR_BASE and out-of-tree Kconfig
extensions.
Commit message from Kconfiglib (cbf32e29a130d)
==============================================
Make "$FOO" directly reference the environment variable $FOO in e.g.
'source' statements, instead of the symbol FOO. Use os.path.expandvars()
to expand strings (which preserves "$FOO" as-is if no environment
variable FOO exists).
This gets rid of the 'option env' "bounce" symbols, which are mostly
just spam and are buggy in the C tools (dependencies aren't always
respected, due to parsing and evaluation getting mixed up). The same
change will probably appear soon in the C tools as well.
Keep accepting 'option env' to preserve some backwards compatibility,
but ignore it when expanding strings. For compatibility with the C
tools, bounce symbols will need to be named the same as the environment
variables they reference (which is the case for the Linux kernel).
This is a compatibility break, so the major version will be bumped to 6
at the next release.
The main motivation for adding this now is to allow recording properties
on each MenuNode in a clean way. 'option env' symbols interact badly
with delayed dependency propagation.
Side note: I have a feeling that recording environment variable values
might be redundant to trigger rebuilds if sync_deps() is run at each
compile. It should detect all changes to symbol values due to
environment variables changing value.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
User mode may now use queue objects. Instead of embedding the kernel's
linked list information directly in the data item, a container struct
is allocated from the caller's resource pool which is then added to
the queue. The new sflist type is now used to store a flag indicating
whether a data item needs to be freed when removed from the queue.
FIFO/LIFOs are derived from k_queues and have had allocator functions
added.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Majority of "accessing Internet" setup is the same for both QEMU and
real boards connected to host, mention that explicitly. Be more
precise that networking settings require net_app_settings API, not
entire net_app. Finally, add information about DNS setup for the
samples requiring it.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Similar to what has been done with pipes and message queues,
user mode can't be trusted to provide a buffer for the kernel
to use. Remove k_stack_init() as a syscall and offer
k_stack_alloc_init() which allocates a buffer from the caller's
resource pool.
Fixes#7285
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Dynamic kernel objects no longer is hard-coded to use the kernel
heap. Instead, objects will now be drawn from the calling thread's
resource pool.
Since we now have a reference counting mechanism, if an object
loses all its references and it was dynamically allocated, it will
be automatically freed.
A parallel dlist is added for efficient iteration over the set of
all dynamic objects, allowing deletion during iteration.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Some kernel APIs may need to allocate memory in order to function
correctly, especially if they are exposed to userspace where
buffers provided by user code cannot be trusted.
Instead of simply drawing from the system heap, specific pools
may instead be assigned to threads, and any requests made on
behalf of the calling thread will draw heap memory from that pool.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Forthcoming patches will dual-purpose an object's permission
bitfield as also reference tracking for kernel objects, used to
handle automatic freeing of resources.
We do not want to allow user thread A to revoke thread B's access
to some object O if B is in the middle of an API call using O.
However we do want to allow threads to revoke their own access to
an object, so introduce a new API and syscall for that.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This works like k_malloc() but allows the user to designate
a specific memory pool to use instead of the kernel heap.
Test coverage provided by existing tests for k_malloc(), which is
now derived from this API.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The 'getting started' documentation is stating that one should set
some environment variables, but this is not necessary because the user
has already been instructed to set the variables in the
platform-specific guides.
The duplicated documentation should be removed because it is inferiour
to the original documentation. E.g. this documentation does not
describe how to permanently set environment variables. Also, it is
confusingly demonstrating how to use the SDK on Windows, but this is
not supported.
I believe that the purpose of the section is to verify that the user
has not misconfigured or misinstalled the toolchain, but this
responsibility is handled better by CMake itself.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Zephyr supports fatfs, nffs and fcb as storage layer. fatfs and nffs
are less suited for application in memory restricted IC's. fcb has a
smaller footprint but has a complex api.
The proposed module is a module with a even smaller footprint compared
to fcb and a simple interface for reading and writing entries. The
module provides wear levelling of flash. This allows the module to be
used not only to store configuration settings but to store device state
(e.g. state of a light switch over reboots) of a zephyr device.
Fixes buffer overflow by introducing maximum read length in nvs_read()
and nvs_read_hist().
Fixes nvs_write() not to reflash the same data. Allows the user to do
call nvs_write() for all defined entries without worries about flash
wear.
Fixes garbage collection error where wrong data could be copied.
Add nvs_delete() to allow deleting a stored entry. A deleted entry will
not be copied to a new flash sector
Include flash wear information in the README.md documentation
0/25 Update module after reviewers remarks, added documentation to
nvs.h, removed README.md by nvs.rst in doc/subsystems folder
04/26 Update module after reviewers remarks, updated nvs.rst, added more
documentation to samples/subsys/nvs/src/main.c, updated doxygen info
in nvs.h (hope this time it works).
04/26 Update subsystems.rst to include nvs.restart
04/27 Updated nvs.c and nvs.h to avoid a possible flash deletion loop
when the file system is full.
04/29 Updated nvs_write to detect and ignore deletes of non-existing
items
05/06 Update NVS module to return standard error codes, removed low
level API, added configuration options. NVS now uses the board dts to
determine the flash storage location (FLASH_AREA_STORAGE_OFFSET).
05/06 Update nvs.rst. Updated intendation and added intermediate
variables in nvs.c to make the code easier to read.
05/06 Update nvs.rst.
05/07 Update nvs.rst
05/08 Changed the API to a more standard file system API.
05/08 Removed cnt_max from nvs_read() as it is not used.
05/08 Removed #ifdef(CONFIG_NVS_LOG) from nvs_priv.h, now the module can
be build with debugging off.
05/09 Removed configuration options for SECTOR_SIZE, SECTOR_COUNT and
MAX_ELEM_SIZE. It is now easy to support multiple NVS filesystems on
one or multiple devices. Changed logging to support newlib systems.
Thanks to Olivier Martin for reporting and proposed changes.
Signed-off-by: Laczen JMS <laczenjms@gmail.com>
The zephyr.exe created when building a native POSIX application can take
some parameters that are documented in the "board" document, so add a
reference to that documentation here.
fixes: #6384
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
New API enables setting watchdog timeout in the unit of microseconds.
It is possible to configure watchdog timer behavior in CPU sleep state
as well as when it is halted by the debugger.
It supports watchdogs with multiple reload channels.
Jira: ZEP-2564
Signed-off-by: Michał Kruszewski <michal.kruszewski@nordicsemi.no>
Signed-off-by: Karol Lasończyk <karol.lasonczyk@nordicsemi.no>
This is handier in some ways compared to the symbol reference pages. The
search feature is more flexible, and you get to see which dependencies
are currently unsatisfied.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
The document talks of settings_handler fields such
as ch_name and ch_set, whereas the actual names
are name, h_set, etc.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
I've collected some of the common issues encountered with doc reviews
into a new contributing document, and included use of the
Zephyr-specific extension for generating code building examples.
Updated conf.py and created an external list of substitutions making it
easier to manage them without editing the sphinx conf file (and
documented this).
Tweaked the comments in the application.py extension python code to
render better in the generated doc that extracts these comments (keeps
the documentation in the python code too to ease maintenance when
updates are made).
Updated the sample template to mention use of this sphinx extension.
fixes: #6831fixes: #6811
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Document the gsource (globbing source), rsource (relative source), and
grsource (globbing + relative source) statements.
Also add a separate section that documents Zephyr's non-standard
prefer-later-defaults Kconfig behavior. It was only mentioned in passing
before.
Piggyback: Move the note about .config assignments having no effect on
invisible symbols closer to the beginning of the 'Configuring invisible
Kconfig symbols' section. It makes more sense there.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
With the introduction of --list-tests to sanitycheck, a few rules have
been added to how to declare test suites.
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
The current doxygen configuration settings create 4096 folders to hold
the generated HTML output (with names such as d3/ddb/). This makes it
difficult to know what an URL would be for a particular module's
(defgroup's) documentation. By not creating these subdirectories,
module documentation file names become quite predictable:
group__<group name>.html
(e.g., group__sensor__interface.html) allowing us to create
links from the Sphinx-generated documentation into the doxygen-generated
HTML content (this part is under investigation).
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Remove the C Kconfig tools and various scripts associated with them.
scripts/kconfig/diffconfig is popular, so keep it.
I don't know whether anyone is using scripts/kconfig/config. Remove it
and see if anyone screams.
scripts/kconfig/streamline_config.pl deals with modules ('m' values) and
can safely be removed. Zephyr's Kconfig files do not use modules.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Update the Application Development Primer to describe the new menuconfig
configuration interface:
- Update the section explaining how the configuration is navigated,
changed, and saved
- Add a section explaining how to jump directly to a symbol in the
configuration interface
- Replace mconf screenshots with menuconfig.py screenshots. Remove some
screenshots that are no longer used.
- Remove the section explaining how to load arbitrary .config files
from within the configuration interface. That feature hasn't been
implemented yet in menuconfig.py.
- Do various minor language cleanup
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Also parse test documentation. When add tests to doxygen, we get
warnings about device.h macros not being defined. Exclude this now and
track this in issue #7367.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The same functionality is now supported by the settings-based
solution, so remove bt_storage out of the way. There were stubs in
bt_storage to handle per-peer information (e.g. pairing keys) but this
was never actually implemented in full. The next step is to add this
support to the settings-based solution.
Leave the code for generating temporary IRK and identity address in
case BT_SETTINGS is not enabled. Also leave the code for using vendor
HCI to read the identity address, in which case the settings
implementation will not touch it.
Introduce a new bt_unpair() API to replace the removed
bt_storage_clear(), since the latter was actually doing more than just
storage management: it was also handling runtime storage of pairing
information. Later, the bt_unpair() implementation will be extended to
clear settings-based pairing storage.
There is one feature that the bt shell module looses: the ability to
give a specific identity address to the "init" command as a parameter.
We might look later in the future if this is really needed, and add a
separate API for this.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Get the 1.12 release notes started with material derived from the 1.12
roadmap (closed issues) and headings from the 1.11 release notes.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
In particular, try to demystify Kconfig.defconfig files, and provide
guidelines on whether configuration settings should go in
BOARD_defconfig or Kconfig.defconfig.
The board porting section seems to be the most relevant one here, so put
the documentation there, with some "see also" links from elsewhere.
Things could be reorganized later if needed.
Give a general overview of visible and invisible Kconfig symbols as
well, as that ties in with the configuration scheme.
This is reverse-engineering on my part. The configuration scheme doesn't
seem to be documented anywhere prior.
Fixes: #7159
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
The NFFS partition at the end of flash is also useful for any other
file system or even the Flash Circular Buffer (FCB). Rename the
partition from 'nffs_partition' to 'storage_partition' and make it
depend on a new hidden Kconfig entry which the relevant users will
select (such as NFFS and FCB).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Adding a new kernel object type or driver subsystem requires changes
in various different places. This patch makes it easier to create
those devices by generating as much as possible in compile time.
No behavior change.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Driver APIs might not implement all operations, making it possible for
a user thread to get the kernel to execute a function at 0x00000000.
Perform runtime checks in all the driver handlers, checking if they're
capable of performing the requested operation.
Fixes#6907.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
The only difference between this call and k_thread_abort() (beyond
some minor performance deltas) is that "cancel" will act as a noop in
cases where the thread has begun execution and will return an error.
"Abort" always succeeds, of course. That is inherently racy when used
as a "stop the thread" API: there's no way in general (or at all in
SMP situations) to know that you're calling this function "early
enough" to catch the thread before it starts.
Effectively, all k_thread_cancel() gives you that k_thread_abort()
doesn't is an indication about whether or not a thread has started.
There are many other ways to get that information that don't require
dangerous kernel APIs.
Deprecate this function. Zephyr's own code never used it except for
its own unit test.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The documentation doesn't give the format for listing multiple files in
CONF_FILE (space-separated list).
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
The current application configuration documentation makes it a bit
unclear that configuration files are merged. Rewrite the documentation
to explicitly talk about merging, which I think is less confusing.
Remove the following section from the introduction as well, as I think
it might make people wonder how they can have an existing kernel
configuration when they haven't created one. The updated configuration
section (which the introduction now has a forward reference to)
clarifies the zephyr/.config bit anyway.
If omitted, the application's existing kernel configuration option
values are used; if no existing values are provided, the kernel's
default configuration values are used.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Pressing Y/N to configure boolean configuration symbols probably won't
be supported in the upcoming Python menuconfig implementation, and Space
is much smoother anyway. '?' is smoother than tabbing to '< Help >' too.
Also remove this part, which I couldn't make sense of:
When a non-default entry is selected for options that are
non-numerical, an asterisk :kbd:`*` appears between the square
brackets in the display. There is nothing added added the display
when you select the option's default.
[*] just means the current symbol value is 'y'.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Expand information about the ModemManager issues (spurious AT commands)
and instructions on adding Segger USB devices to the ModemManager
blacklist.
Signed-off-by: Iván Sánchez Ortega <ivan@sanchezortega.es>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
A recent LF change to the Zephyr mailing list hosting software changed
the mailing list names and links to the message archives.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The search result from Sphinx displays raw ReST file snippets showing
the context of the search hit. While we could generate text versions of
the ReST files just for the search results, it would potentially double
the time to generate docs (run once to generate txt files, run again to
generate HTML).
Instead, this patch does a poor man's cleanup of the ReST markup on the
fly when the search summary snippets are written out. Not perfect, but
looks much better.
It does expose a problem that some of our ReST content is not actually
written out into a .rst file. Content that's dynamically generated by
extensions, such as the sample code from zephyr-app-commands, can
yield a search result hit, but there's no hits in the .rst file content
itself.
Line 552-558 are the modified lines from the Sphinx-provided
searchtools.js that does the pattern match/replace.
Addresses: #7032
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
It has been observed that users might "default" to Python2 and pip
will therefore install packages for the wrong Python. pip3 appears to
always be installed when Python3 is installed, so we invoke pip3
instead of pip2 to be safe.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The logic for walking reverse dependencies (from 'select's and 'imply's)
is a bit tricky to read (and write), and was essentially duplicated in a
few different spots (including in the upcoming menuconfig
implementation).
Use a new split_expr() helper function that's been added to Kconfiglib
to reduce code duplication and make the code more readable.
This also has another nice side effect: The list of symbols that select
a particular symbol now has the symbols in the order that they appear in
the Kconfig files.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Several users have reported confusion about whether one should stop at
the 'Using MSYS2' guide, or continue following the guide.
To resolve this we title the three options as Option 1,2,3, and change
the wording of the second guide to make it clear that it is an
alternative, not an additional step.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
At the moment "USB Vendor and Product identifiers" is hanging
inside "Subsystem" section.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Clean up the text, add an important warning, and add a self-contained
example rather than referring to the internal test code.
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
Provide board porting guidelines to help achieving a coherent
board library to ease work for people developing application
not board specific and define clear objective to help board
porting reviews.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This patch introduce doc for settings subsystem
with FCB and File System beck-ends.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Noticed a typo in the first sentence, then some missing articles further
down, and some other clarity and grammar edits came along.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Modernize macOS instructions to fit the latest packages offered by
Homebrew and macOS High Sierra.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add documentation for two closely-related subystems: dfu and mgmt, which
are currently undocumented.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add a reference to the MCUboot flash partition doc so we can link to it
from other documentation pages.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Using QEMU host on a Zephyr application using IPv4 to access Internet
requires IPv4 forwarding, so show a command to enable IPv4 forwarding.
Signed-off-by: Stig Bjørlykke <stig.bjorlykke@nordicsemi.no>
The new version of the reference page for a symbol lists the following
essential and generally useful information at the top of the page:
- Prompt
- Type
- Help text
- Direct dependencies (from 'depends on', and inherited from if's and
menus)
- Defaults
- Other symbols selecting or implying the symbol
The current symbol value and visibility are no longer displayed. They
don't make much sense in a reference document, as they depend on user
values from configuration files.
The bottom of the reference page also includes the symbol represented in
Kconfig format (including propagated dependencies).
All references to defined symbols appearing in expressions are turned
into links, which can be clicked on to jump to the reference page for
that symbol.
The following (slightly outdated) screenshot gives an idea of the
format:
https://www.dropbox.com/s/a34tlk2ncyus8po/promptandtype.png?dl=0
This commit also removes Kconfiglib 1, since it is no longer used.
Fixes#5622Fixes#6821
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Running 'make html' in doc/ when doc.log is missing or empty gives the
following error if sphinx-build doesn't write anything on stdout/stderr:
Error in ./scripts/filter-doc-log.sh: logfile "doc.log" not found.
Makefile:84: recipe for target ”html” failed
make: *** [html] Error 1
The problem is that scripts/filter-doc-log.sh tests for the existence of
the log file with [ -s ${LOG_FILE} ], which requires it to be nonempty.
Fix it by using -e instead, which only checks if the log file exists.
scripts/filter-known-issues.py ($KI_SCRIPT) seems to be able to deal
with empty files (and runs quickly).
Fixes#6854
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
When sphinx-build is run under Python 2, running e.g. 'make html' in
doc/ currently causes the following error:
Exception occurred:
File "conf.py", line 128, in <module>
from lexer.DtsLexer import DtsLexer
ImportError: No module named lexer.DtsLexer
The problem is that doc/extensions/lexer/ contains no __init__.py file,
which prevents Python 2 from finding submodules in it[1].
The problem does not occur for Python 3, due to implicit namespaces
packages:
https://www.python.org/dev/peps/pep-0420/
Add an empty __init__.py to doc/extensions/lexer/ to fix building when
sphinx-build uses Python 2 (2.7 is still the version recommended on the
Sphinx homepage). This won't alter the behavior for Python 3.
(doc/extensions is added to the search path at the beginning of conf.py
and so doesn't need an __init__.py. doc/extensions/zephyr already has an
empty __init__.py.)
[1] https://docs.python.org/2/tutorial/modules.html#packagesFixes#6851
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Add a sample that demonstrates a custom board definition. This proves
that BOARD_ROOT works and can be a useful reference when creating a
custom board definition.
Instead of spending time making up a board, the nrf52840_pca10056
board has been copied as-is. And the hello world sample has been used
as the basis for the application.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
In order to avoid duplication, move all information relating to QEMU and
BlueZ from samples to subsystems, and expand to cover BlueZ installation
and usage of Controllers with BlueZ and QEMU in detail.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The documentation is referencing the macro SYS_INIT_PM, but
SYS_INIT_PM does not exist, the correct name is SYS_DEVICE_DEFINE.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
There are several references to config_info in this documentation, but
no introduction to what it is. Including this declaration makes it
possible to understand the documentation.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The paragraphs on error handling are out-of-place, as they are
abruptly explained in the middle of a section that is about the cruft
involved in declaring and implementing drivers.
This commit moves them into their own section.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Since commit a792a3d410, adding an ini
file in scripts/sanity_chk/arches/ to support a new board is no longer
needed.
Signed-off-by: Reto Schneider <code@reto-schneider.ch>
Single backslashes outside of a code-block are treated as escape
characters, so need to double up to get a single backslash rendered in
the generated HTML.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Decode Kconfig sources as UTF-8 instead of decoding them according to
the system locale (which might be ascii-only).
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Adding missing dependency to the "getting started" documentations.
Without the python3-wheel package, running "pip3 -r requirements.txt"
on a Debian system will fail.
Signed-off-by: Iván Sánchez Ortega <ivan@sanchezortega.es>
Add the missing 'max_num_pending_alerts' argument to the
K_ALERT_DEFINE used in the "Signaling an Alert" code example.
Signed-off-by: Stig Bjørlykke <stig.bjorlykke@nordicsemi.no>
Fixed spelling and formatting issues (a blank line is required before
the first item in a list, or sublist).
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
All Sphinx-generated pages for tagged release documentation include the
release version number in the breadcrumb header. This patch adds this
to the "Latest" daily doc build results that are the default pages seen
when visiting docs.zephyrproject.org
Fixes: #6432
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Added details on new ARM boards, removal of panther board support on
x86 and arc, and dts.fixup changes.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Note that the I2C driver is now operational and there's a new driver
for the PWM LED controller.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Include and describe all the highlights in the 1.11 release, listed in
the major features initial section and described in the different
subsections in more detail.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Update the home page to add a choice for the 1.11 docs and update the
release notes page to add the 1.11 release notes link.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Looks like newer versions of Sphinx have a problem with the autodoc
extension. Since we're not usine Sphinx to process python source for
documentation, removing use of autodoc eliminates the problem.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Edits and additions for clarity and correctness, based on the current
contents of the file (dts.cmake) which controls the DTS build.
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
Re-work the flash partitions documentation:
- add sections to provide more complete context
- link to useful information on DT overlays elsewhere in the
documentation
- touch up some phrasing
- inline a smaller, self-contained example within the page rather than
linking to an entire board dts
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
Hide all symbols whose names begin with an underscore. Although these
might be documented, they shouldn't be used by applications, as there's
no guarantee they will be available in subsequent versions, or maintain
API and ABI compatibility.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Instructions for generating documents locally needed some updates
because of build environment changes and use of newer tool versions.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
This is one way we can support out of tree board definitions. Basically
all this needs is a board definition in the application source directory
that follows the same structure we have in the main Zephyr tree (also
allowing multiple custom boards). An application tree would look like
this for example:
boards/
CMakeLists.txt
prj.conf
README.rst
src/
with boards following the same structure as in Zephyr:
.
├── boards
│ └── x86
│ └── arduino_101
│ ├── doc
│ │ └── img
│ └── support
└── src
To use this, you need to specify the BOARD_ROOT variable on the command
line when building:
cmake -DBOARD=<board name> -DBOARD_ROOT=<path to boards> ..
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Courtesy of thomsten on IRC, add a link to a handy RTT viewer written in
Python and cross-platform.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Describe how to disable the UART console to avoid unexpected
redirections that will prevent the console output to go through RTT.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This patch adds documentation on the design and implementation of stack
objects for architectures which utilize MPU backed stack and memory
protection.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
We want to support other toolchain not based on GCC, so the variable is
confusing, use ZEPHYR_TOOLCHAIN_VARIANT instead.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add a new zephyr-env.cmd that mirrors the functionality of zephyr-env.sh
but on Windows platforms. It sets ZEPHYR_BASE to the location of the
script.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Correct 2 items in the Windows Getting Started doc:
* dtc-msys2 is now an upstream Chocolatey package
* Add instructions to clone and build Ninja for MSYS2
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This patch updates information pertaining to userspace related security
features. Some of these have been added to releases and this needs to
be shown in the document.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Aligned sanitycheck command line options in doc
with the actual ones.
+
Minor fix in --coverage description.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
The net_buf unit tests were doing some pretty hacky stuff with
defining a dummy _net_buf_pool_list variable to fulfil the linker
magic that happens with a real build. Until now the code got lucky in
that the simple net_buf_alloc() tests didn't depend on
_net_buf_pool_list being valid, however with the coming redesign even
net_buf_alloc will require proper setup of this.
Since the unit tests were extremely minimal, and not testing anything
beyond what tests/net/buf already tests, just remove them for now.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When the Kconfig BOOTLOADER_MCUBOOT is selected, an overlay to place the
image at the slot0 location is required. In order to avoid having to do
this manually for all samples when targetting MCUboot, include the logic
inside the dts.cmake script to prepend a new common.dts file that then
conditionally includes mcuboot.overlay.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This package is not needed for building on fedora and currently causes
dependency issue with the fedora package manager, so remove it.
Fixes#6013
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Elevate prominence of some items buried in the services list that are
significant changes introduced in the last few releases.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Remove thread from memory domain API (k_mem_domain_remove_thread())has
only one argument which is thread ID as per the implementation whereas
documentation says there has to be two arguments, memory domain and
thread ID.Memory domain argument is not required as a thread belongs
to single memory domain at any point in time. Also memory domain
initialisation function (k_mem_domain_init()) should accept only 3
arguments i.e, memory domain name, number of parts and array of
pointers to the memory domain, instead of 4.
Signed-off-by: Spoorthi K <spoorthi.k@intel.com>
In a scenario where a platform harbours multiple interrupts to the
extent the core cannot support it, an interrupt controller is added
as an additional level of interrupt. It typically combines several
sources of interrupt into one line that is then routed to the parent
controller.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
Intro page update to list the features and major changes that
happened in the last year
fixes#5136
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Issue #5996 mentions the need for a shell feature that is somewhat
implemented already, but not documented: the "kernel" module has
commands to display information about the kernel version, uptime,
cycles, threads, and stacks, so add that to the subsystem/shell doc.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
This patch changes the manner in which we collect DTS overlay files so
that they comply with the same approach taken for configuration fragment
files (.conf).
Additionally it also documents the usage of those files in the
Application Developer Guide.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Added noprompt command to shell. It will disable printing
the prompt.
For the native port, when feeding commands from a file or
pipe the prompt reprinting after each command (without echoing)
just confuses the user.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
The expected order for heading levels in our ReST documents is # for H1,
* for H2, = for H3, and - for H4. Some documents snuck in without
following this guideline.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The existing docs immediately dive into the details without providing
the user with any kind of high level overview or description of the
threat model.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This documentation is needed for developers who are porting new boards.
Fixing #5577
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Rework the Application Development Primer so that it describes the
differences between UNIX and Windows builds and uses Ninja by default,
in order to be compatible with all of them.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
In order to be able to document the build on Windows and UNIX
systems, slight variations are required on the app commands
that are used throughout the documentation system.
This includes getting rid of the prompt symbol and providing commands
for both UNIX and Windows operating systems.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Since QEMU currently requires Linux or macOS to run, use "unix" as a
host OS for those documenting the build with it.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
In order to properly support documenting building on both UNIX and
Windows, a new "host-os" option has been added to the Python script,
alongside with a switch to ninja as the default generator.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Since we're switching to ninja as a default generator for CMake, require
the ninja package as part of the requirements on macOS.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The new native Windows development environment no longer relies on MSYS2
or WSL at all. Instead it uses a standard Command Prompt and Windows
native tools. Document the installation and setup process in order to be
able to compile and develop.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The jquery provided by Sphinx 1.5.5 has a bug dealing with the
coordinates returned for offset().top for empty <span> tags, generated
by Sphinx for intra-document labels used to create hyperlink anchor
targets. As reported in PR #5591, some browsers (chrome for example)
don't scroll to the right spot in the document when we link to these
intra-document label points. jquery v3.1.2 fixes this. (When Sphinx
updates the jquery included in its release, we can remove our copy that
is overriding the copy installed in the generated output by Sphinx.)
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Document USB Vendor and Product IDs and their intended usage.
Set the Vendor and Product IDs and define the USB bcdDevice
Device Descriptor Device Release Number to be the binary
coded decimal representation of the Zephyr major and minor
kernel version number.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Instead of wildcards we now are using environment variables to set the
path to Kconfig files for board and architecture. This break
documentation generation for Kconfig variables.
Using the env variables, we now set the path to what it used to be to
restore previous behavior.
Also, when something like this happens in the future, we should abort on
doc creation failure.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Modern windows tools will properly handle windows or linux line endings
so remove the warning about windows tools.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Certain parts of Zephyr require Unix-style line-endings. To make sure
the line endings are not converted to Windows-style line-endings we
explicitly specify core.autocrlf=false when cloning.
This fixes#5557
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Fix broken links in getting_started. We now use "Implicit Hyperlink
Targets" instead of :ref:. I don't know why :ref: wasn't working.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Do not list unsupported doxygen options in the config file, those cause
the doc building process to fail on some systems.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This updates GAP, GATT, SM, L2CAP ICS values according to following
documents:
GAP.ICS.5.0.2
SM.ICS.5.0.0
GATT.ICS.5.0.1
L2CAP.ICS.5.0.1
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Checking for TERM being undefined before doing tput with colors is not
enough; if TERM is defined as 'dumb', this thing also behaves dumbly.
In fact, the whole trying to do colors thing is dumb and causes all
kinds of headache in corner cases, so just wrap anything smelling like
color in a check for TERM being undefined or 'dumb' and be done with
it.
It shall take care of different automation mechanisms that don't
invoke 'make htmldocs' from a user console.
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
The APPLICATION_BASE variable in the example Kconfig file was copied
in from an (out of tree) application which relied on it during the
Kbuild days, but it's actually not needed by the CMake build system
and should be removed.
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
Some users might want to inherit their already existing Windows
environment variables into the MSYS2 system. This note explains how to
achieve this.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
When running on jenkins and other automation environment, TERM will
not be defined and thus tput errors out.
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
L2 specific data and IEEE 802154 net mgmt interface are not related.
Plus, application may use the net mgmt part, not the L2 one. So let's
split the content in relevant headers.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Final edit pass on the release notes prior to 1.10 release.
Fixed misspellings in GitHub issues title (here and in GitHub).
Updated doc changes.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Add link to the 1.10 technical docs to the available tech docs listed in
the documentation home page. Add the 1.10 release notes to the list of
available release notes in the release notes page.
Also update description of where to get Zephyr source code (downloadable
archives listed in the GitHub tagged releases page).
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
There are files in the cloned copy of the Zephyr tree needed to setup
the development environment, so there's a bit of chicken and egg
problem.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
With a clean Ubuntu install, following the getting started page
instructions for linux, only python3 is installed. Apparently (by
design), a python3 install does not create the symbolic link for
/usr/bin/python so the doc/Makefile complains.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
This commit fixes
https://github.com/zephyrproject-rtos/zephyr/issues/5008.
It does so by splitting up gen_syscalls.py into two scripts with a
json metadata file to communicate syscall metadata between them. The
parsing script parses header files from include/ and writes syscall
metadata to a file if the contents changed. The generation script
reads from the json file and generates syscall code.
The build system DAG now looks like this:
always_rebuild -> json -> syscalls -> offset.o
The script for generating json will do so only if the content changes,
this ensures that the entire DAG does not always do a full rebuild.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The genrest.py script used to create configuration options documentation
from the KConfig files generates slightly incorrect OPTION directives
(with an extra colon at the end). Sphinx 1.5 didn't care, but Sphinx
1.6 does, so fix this now in preparation for upgrading Sphinx to the
current version.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Since we moved around where yaml, dts, and fixup files exist we need to
update the docs to reflect those changes. Also, try and make the docs
at little more generic to changes that are occuring.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Some API material (from doxygen comments) wasn't included in the
generated documentation because there was no doxygengroup Sphinx
directive to display them. This PR add content into appropriate places
in existing documentation (e.g., Bluetooth Cryptography APIs into the
Bluetooth API doc) and creates two new collections for Display and
Miscellaneous APIs.
Comments added to the .rst files to mention doxygengroups that are
intentionally excluded (because they're organizational groups containing
subgroups that are included).
Sorted the Bluetooth API list, mostly.
Fixed a couple doxygen group titles defined in the include files, and
added a few patterns to filter new "expected" errors from the document
generation process.
Legacy and deprecated APIs remain left out, as intended:
http_legacy (net/http_legacy.h)
spi_interface_legacy (spi_legacy.h)
zoap (net/zoap.h)
fixes: Issue #5051
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Run file through doxygen -u doc/zephyr.doxyfile and generate
a clean config with latest options and documentation.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Sphinx/breathe doesn't support showing nested groups, so explicitly add
the nested groups in the API documentation (for Bluetooth Mesh).
Also, added an ignore pattern for a nested unnamed type known issue.
fixes: issue #5040
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Update for LOW POWER state and SYSTEM OFF state for nrf52.
update for TICKLESS KERNEL support in xtensa_sys_timer
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
Add basic documentation about Ethernet over USB and describe
prj_netusb.conf configuration file.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Note we've added a new Sphinx inline role for references to GitHub
issues, `1234` (along with the existing inline role for Jira
issues :jira:`ZEP-1234`)
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
While sphinx-build messages are captured to a file (and tee'd to
stdout), messages from doxygen weren't captured to the file and so were
missed as an error that needed fixing. (You can see the message if you
run 'make htmldocs' locally and in shippable script output, but the
message filtering tool that throws an error if unexpected messages
appear, didn't get to see those. This fixes that.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
This gives more detail on how system calls with large argument
lists, or large return value types should be handled.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
installed GDB on host might not be compatible with the binary generated
by Zephyr. Mention that we need to use the gdb that corrosponds to the
toolchain being used.
Fixes#4312
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This change changes the semantics of the environment variable
ZEPHYR_SDK_INSTALL_DIR to allow the use of 3rd party toolchains
alongside the Zephyr SDK's host tools.
Specifically, setting ZEPHYR_SDK_INSTALL_DIR now indicates that the
Zephyr SDK host tools are to be used. But not necessarily that the
Zephyr SDK's toolchain is to be used.
The documentation is also changed to explain this behaviour.
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
The qemu option to access the host's Bluetooth controller is now
automatically added to QEMU_EXTRA_FLAGS whenever Bluetooth support is
enabled in the application. Update the documentation to reflect this.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Rather than continuing to add build system goals, let's just trust the
user to do the right thing. The only special case is build, which is
the default goal.
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
Since run is also used commonly, add it as a goal as well for those
users of the extension that want to create a sequence similar to:
$ make
$ make run
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The new :compact: option allows for a single block of code output
without additional newlines or comments.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
New arguments added:
- conf: -DCONF_FILE=<>
- gen-args: Additional arguments to pass to CMake
- build-args: Additional arguments to pass to Make or Ninja
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
CMake requires "-D" for every macro that is passed into it. Add the
relevant "-D" for the Make variant of the extension.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add extensions/zephyr to the documentation. This is where Sphinx
extensions customized for Zephyr will live.
Within, add application.py. This provides a directive,
zephyr-app-commands, which generates commands in the docs to build,
flash, debug, etc. an application. For now, these are Unix shell
specific. Later on, they can be customized to generate additional
formats, perhaps with extra options.
After this is used throughout the tree, doing this with an extension
enables global changes with changes to the directive implementation
only.
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
Unify the format and mechanisms used in the different Getting Started
guides so that they are consistent in:
- The way Kconfig is built
- Avoiding using -B and -H CMake options
- -DBOARD instead of export
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
We no longer want to pin users to 3.8.2. Instead we tolerate the warning
and therefore ask users to get the latest CMake package from their
distro.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The line between Zephyr versus application is blurry since they share
a configuration, but try to disambiguate.
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
The documentation regarding application-specific Kconfig options is
unclear. Fix that.
Reported-by: David Kinder <david.b.kinder@intel.com>
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
The ELF format and extension is an acronym that needs a
definition. Add it.
Reported-by: David Kinder <david.b.kinder@intel.com>
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
Grammatical fixes caught in review of unrelated changes.
Reported-by: David Kinder <david.b.kinder@intel.com>
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
Fix the instructions for when an alternate CONF_FILE is used.
Reported-by: David Kinder <david.b.kinder@intel.com>
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
Re-work this section for clarity, making it clearer where the division
between emulated and real hardware is, and cleaning up the
instructions. Also re-work for correctness, updating Kbuild-style
flash instructions to use CMake.
Also make sure users know they can flash and run from anywhere on the
system using cmake --build.
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
Fix the white space around "Naming Conventions", which is currently
appearing on its own line.
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
This document's flow could be improved a bit. The overview section is
followed by somewhat dense reference material, which is then followed
by step-by-step instructions central to the application workflow.
Fix this up by moving the details to the end, and adjusting the
transitions between the sections a bit.
The diff looks like a mess, but this commit is mostly just moving
things around. There are also various grammar fixes incorporated from
review.
Reviewed-by: David Kinder <david.b.kinder@intel.com>
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
squash! doc: application: move build/run/debug docs after overview
Make this a bit less Unix-centric, changing the CMake invocation lines
to only use documented parameters that continue to work across all
CMake versions (-B doesn't work everywhere, and -H means "help" in
recent versions of CMake).
Handle some 80-column cleanliness. Add documentation about the search
key, /. Be a bit more explicit about the steps.
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
Now that the above sections more clearly define the behavior of
CONF_FILE, the section on writing a .conf can be cleaned up and made
into a simple primer on syntax.
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
Fix a few issues related to the description of an application's
CMakeLists.txt file, and how that relates to its configuraiton.
Make sure the section "Application CMakeLists.txt" appears under the
parent "CMake" section, instead of on its own. The order in which
lines appear in the application CMakeLists.txt is important, and
that's not coming through clearly, so try to improve that. Document
how the values for BOARD and CONF_FILE are determined by
boilerplate.cmake here. Also document usage of KCONFIG_ROOT, as its
Kbuild-based equivalent is something that users ask about.
Merge some content from the following section "Application
Configuration" into the appropriate places, to keep the document flow
working. Add references in "Application Configuration" to definitions
provided previously in the document, for clarity.
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
Update the initial application overview and the basic "how to create
an application" sections for the CMake transition. This is worth doing
on its own, and also enables other fixes and improvements to below
sections.
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
This makes it possible to point users at a canonical location for how
to use zephyr-env.sh, etc.
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
Update the Windows MSYS2 instructions with the required CMake commands
used to build on this platform.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This initial batch of documentation describes policies and
mechanism related to kernel objects and system calls.
Some details on porting user mode to a new arch have been
provided in the architecture porting guide.
Thread documentation updated with some user mode consideration.
This is not the final documentation, more to come in subsequent
patches.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Create http library that uses net-app instead of net_context
directly. The old HTTP API is deprecated.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Now that net_buf has "native" support for sys_slist_t in the form of
the sys_snode_t member, there's a danger people will forget to clear
out buf->frags when getting buffers from a list directly with
sys_slist_get(). This is analogous to the reason why we have
net_buf_get/put APIs instead of using k_fifo_get/put.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This should clear up some of the confusion with random number
generators and drivers that obtain entropy from the hardware. Also,
many hardware number generators have limited bandwidth, so it's natural
for their output to be only used for seeding a random number generator.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Adding NET_MGMT_DEFINE_REQUEST_HANDLER to the doxygen configuration
list of pre-defined macros eliminates 800 lines of "expected" warning
messages from the document generation output. Generated API docs
are unchanged. Cool.
Remember this if/when other macros pop up as a problem for the
doxygen/breathe/sphinx API generation tools.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The predefined macro list for doxygen processing had a typo error
causing __attribute__(x) to not be handled correctly.
kernel.h was recently updated to include use of
__attribute__((sentinel)) and doxygen wasn't happy about
processing the API doc comments for the affected function.
Also added a couple of other predefined macros used in Zephyr.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
ZOAP library has certain limitations in parsing and preparation of
coap messages. It can handle only on single network fragment. If
network packet is split between multiple fragments it fails. This
patch is just copy and rename of 'zoap' to 'coap'.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The sanity test script needs to have ccache installed on the Ubuntu
and Fedora developement environments.
Signed-off-by: David Leach <david.leach@nxp.com>
The MSYS2 installer does not include an updated version of the package
database, so users need to update it first in order to install all of
the required dependencies. Additionally, the repo must be cloned before
being able to install the Python requirements.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
doc/kernel/overview/changes.rst contains information about changes from
kernel release 1.5 ("Version 1 Kernel") to the combined "Version 2
Kernel" and doc/porting/application.rst talked about how to change
applications using Version 1 interfaces to the Version 2 interface.
This information remains in the online tagged versions of the
documentation, but it's time to remove this from the current
documentation set. (Also removing example porting code.)
Fixes issue #1524
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Add the following application-facing memory domain APIs:
k_mem_domain_init() - to initialize a memory domain
k_mem_domain_destroy() - to destroy a memory domain
k_mem_domain_add_partition() - to add a partition into a domain
k_mem_domain_remove_partition() - to remove a partition from a domain
k_mem_domain_add_thread() - to add a thread into a domain
k_mem_domain_remove_thread() - to remove a thread from a domain
A memory domain would contain some number of memory partitions.
A memory partition is a memory region (might be RAM, peripheral
registers, flash...) with specific attributes (access permission,
e.g. privileged read/write, unprivileged read-only, execute never...).
Memory partitions would be defined by set of MPU regions or MMU tables
underneath.
A thread could only belong to a single memory domain any point in time
but a memory domain could contain multiple threads.
Threads in the same memory domain would have the same access permission
to the memory partitions belong to the memory domain.
The memory domain APIs are used by unprivileged threads to share data
to the threads in the same memory and protect sensitive data from
threads outside their domain. It is not only for improving the security
but also useful for debugging (unexpected access would cause exception).
Jira: ZEP-2281
Signed-off-by: Chunlin Han <chunlin.han@linaro.org>
Building off the success of PR #4119, add more attributes to the sphinx
processing list (as encountered in PR #4123) plus others from
include/toolchain/gcc.h that looked safe to add.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
To define a system call, it's now sufficient to simply tag the inline
prototype with "__syscall" or "__syscall_inline" and include a special
generated header at the end of the header file.
The system call dispatch table and enumeration of system call IDs is now
automatically generated.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The doxygen/sphinx/breathe processing for API documentation has some
known issues and we've been using a post-processing filter to eliminate
"expected" warnings. Sphinx/Breathe 5.0 was updated to support
identifying attributes causing these warnings, so this PR adds a
starting list to get around warnings recently introduced with __syscall
and __syscall_inline (PR #4103).
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Update the versions of tools used to generate documentation locally and
include a description of the message filtering now included in the doc
build Makefile (formerlly only done in the CI scripts).
Also, include the documentation docs in the developer guides to help
folks that want to contribute and generate docs locally.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Add contribution process for including non-Apache 2.0 components
as approved by the TSC. Include a README template that lists
information requested by the TSC and governing board for review.
Add a brief mention in the CONTRIBUTING link that appears when
submitting a new PR or Issue via the GitHub web interface.
Included an introduction to the process steps that includes using the
zephyr devel mailing list to discuss new components.
fixes#1543
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Because of known issues with Sphinx/Breathe tools we're using to
generate doxygen-based comments for our API documentation, we're getting
a bevy of warning messages written out. As a workaround for our CI
system, we created a filter-known-issues.py script to remove "expected"
warnings from the output.
This patch moves calling that filter script into the doc generation
Makefile so folks making local builds of the docs won't be tripped up by
all the warning messages either. Output of the "make htmldocs" command
is now filtered so only "unexpected" errors and warnings will be shown.
(See https://github.com/sphinx-doc/sphinx/issue/2682 and
sphinx-doc/sphinx#2683i for the Sphinx/Breathe issues.)
Fixes#1527
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Add information that static IPV4 address of gateway needs to be
explicitly configured when DHCP is not supported.
Signed-off-by: Michał Kruszewski <michal.kruszewski@nordicsemi.no>
fixed error introduced in application.rst (v1.8) along with a general
spelling check pass including consistent spelling of "runtime" and
hyphenated words with "pre-"
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Tweaks to the zephyr-doc-theme for improving the API layout
should be applied to the read-the-docs (RTD) theme too.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Doxygen-generated API documentation had the ability to
group API information into sections based on the class
of items: Defines, Typedefs, Enums, Functions and then
alphabetized with these groups. By removing the
Breathe directive :content-only: we can get these class
groupings back (instead of having items just sorted
alphabetically across all classes), and also allow @name
groups to be defined for creating and displaying additional
groups (as requested by a developer).
Depends on CSS changes in
https://github.com/zephyrproject-rtos/docs-theme/pull/14
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
spi.h and spi_legacy.h contain duplicate type and function names that
interfere with the doxygen-based API documentation.
fixes: #1425
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
In final preparation for the 1.9 release, add the doc link for the
tagged 1.9.0 documentation to the index page.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The script used to generate Kconfig documentation (genrest.py)
was creating .rst files without a final newline.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Include the fact that the Zephyr BLE Controller is ready for
qualification in the release highlights.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Make it known to any out-of-tree apps that they need to update their
references to any Bluetooth Kconfig options.
Jira: ZEP-2558
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Updated doc for release 1.9 for :-
1. Added device tree support for Intel Quark based microcontroller
boards.
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
Updated doc for rel 1.9 for :-
1. TICKLESS Kernel support for nrf RTC timer.
2. Added test cases for stress test round robin scheduling and priority
premptive scheduling.
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
The :download: directive doesn't format well on output, and also
links to files that likely have linux line endings that don't
display well on Windows systems.
fixes: #1204
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
There're no "POSIX API support", of POSIX features, only subsets of
Pthreads and BSD Sockets APIs are implemented.
Also, mention HTTP client/server improvements.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Simplify top-level table of contents and create the user guide which
includes the application development primer and other guides and
refereces instead of having them at the top-level.
Also move glossary section away from top-level TOC and remove broken
search link.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
While we're working on doc publishing that separates
kernel docs that are release-specific from project docs
that aren't, (temporarily) put the security documents
here so they'll be published with the 1.9 release.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
In order to allow for the controller to report the RSSI of a received
Scan Request, include the field inside the Scan Request Received
Vendor-Specific Event.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add cross-referenced information on the 96b_carbon and
96b_carbon_nrf51 pages which disambiguates between the two "boards".
Also describe how to flash 96b_carbon_nrf51 with
samples/bluetooth/hci_spi and 96b_carbon with samples/bluetooth/ipsp
to support a Bluetooth HCI stack on 96Boards Carbon (the physical
board).
While we're here, make the documentation page for 96b_carbon match the
format in doc/templates/board.tmpl.
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
Add a sample application that allows a Zephyr-based Bluetooth
controller to interface with an HCI driver via SPI. This sample
implements the same BT SPI protocol already as Zephyr's HCI SPI
driver.
Currently, the sample only supports the legacy SPI API.
Provide a single configuration file, avoiding board-specific
files. Some board-specific configuration information must be provided
via other means:
- CONFIG_BT_CONTROLLER_TO_HOST_SPI_DEV_NAME
- CONFIG_BT_CONTROLLER_TO_HOST_SPI_IRQ_DEV_NAME
- CONFIG_BT_CONTROLLER_TO_HOST_SPI_IRQ_PIN
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Since Advertising Extensions are not supported yet by Zephyr, clarify
the extend of Bluetooth 5.0 support in the subsystem.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
LF is requesting a Core Infrastructure Initiative evaluation
and badge on our website. This PR introduces that into our
README.rst on GitHub and also merges content from the
README into our introduction document.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The API name space for Bluetooth is bt_* and BT_* so it makes sense to
align the Kconfig name space with this. The additional benefit is that
this also makes the names shorter. It is also in line with what Linux
uses for Bluetooth Kconfig entries.
Some Bluetooth-related Networking Kconfig defines are renamed as well
in order to be consistent, such as NET_L2_BLUETOOTH.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Origin: SICS-IoT / Contiki OS
URL: https://github.com/sics-iot/lwm2m-contiki/tree/lwm2m-standalone-dtls
commit: d07b0bcd77ec7e8b93787669507f3d86cfbea64a
Purpose: Introduction of LwM2M client library.
Maintained-by: Zephyr
Lightweight Machine-to-Machine (LwM2M) is a protocol stack extension
of the Constrained Application Protocol (CoAP) which uses UDP
transmission packets.
This library was based on source worked on by Joakim Eriksson,
Niclas Finne and Joel Hoglund which was adopted by Contiki and then
later revamped to work as a stand-alone library.
A VERY high level summary of the changes made:
- [ALL] sources were re-formatted to Zephyr coding standards
- [engine] The engine portion was re-written due to the heavy reliance
on ER-CoAP APIs which are not compatible to the Zephyr CoAP APIs as
well as other Zephyr specific needs.
- [engine] All LWM2M/IPSO object data is now abstracted into resource
data which stores information like the data type, length, callbacks
to help with read/write. The engine modifies this data directly (or
makes callbacks) instead of all of the logic for this living in each
object's code. (This wasn't scaling well as I was implementing
changes).
- [engine] Related to the above change, I also added a generic set of
getter/setter functions that user applications can call to change
the object data instead of having to add getter/setting methods in
each object.
- [engine] The original sources shared the engine's context structure
quite extensively causing a problem with portability. I broke up the
context into it's individual parts: LWM2M path data, input data and
output data and pass only the needed data into each set of APIs.
- [content format read/writer] sources were re-organized into single
.c/h files per content formatter.
- [content format read/writer] sources were re-written where necessary
to remove the sharing of the lwm2m engine's context and instead only
requires the path and input or output data specific to it's
function.
- [LwM2M objects] re-written using the new engine's abstractions
Signed-off-by: Michael Scott <michael.scott@linaro.org>
This introduces an schema-based YAML validation process when loading
any YAML file, before doing any operations on them. An exception will
be raised at SanityConfigParser() if the file fails to verify with the
given schema.
Schemas are defined for the platform files in board///*.yaml and for
the (sample|testcase).yaml files. The verification is done using the
pykwalify python library. If not installed, a warning is printed and
the verification schema is skipped. At some point, we might want to
force it being installed.
The verification library is made a separate module (scl.py) so it can
be easily imported by others.
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
AFAIK an ini file system was ported to a yaml file system. But some
ini file references still remain.
This patch changes all ini file mentions into yaml.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Using bullets was too dense and not easy to read. Definition lists makes
this document more pleasant to read.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
ReST defines interpreted text roles where text enclosed by single quotes
can be "intrepreted", for example :ref:`some name` becomes a link to
a label anywhere in the doc set named "some name", :c:func:`funcname()`
becomes a link to the API documentation for "funcname", and
:option:`CONFIG_NAME` becomes a link to, in our case, the documentation
for the generated Kconfig option.
This patch fixes uses of `some name` (without a role) by either adding
an explicit role, or changing to ``some name``, which indicates inline
code block formatting (most likely what was intended).
This is a precursor to changing the default behavior of interpreted
text to treat `some name` as :any:`some name` (as configured in
doc/conf.py), which would attempt to create a link to any available
definition of "some name".
We may not change this default role behavior, but it becomes an option
after the fixes in this patch. In any case, this patch fixes incorrect
uses of single-quoted text (possibly introduced because GitHub's
markdown language uses single-quoted text for inline code formatting).
Jira: ZEP-2414
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Request from Marketing and Linux Foundation to add a link to the Zephyr
GitHub repo on the documentation home page.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Includes updates to Zephyr networking API feature list (also minor
tweaks to it not dorectly related to sockets), overview of BSD
Sockets compatible API, and basic API reference section.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The net-app API is a new API for applications to use when configuring
the network subsystem during device boot or when creating simple client
or server applications. This commit gives general information about the
net-app API and its usage.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Version 0.2.7 of this library has been released on June 30th, and this
patch updates the library from version 0.2.6. A summary of changes
is available at the official repository at:
https://github.com/01org/tinycrypt/releases/tag/v0.2.7
There were some API changes in this version, so some tests are not
building: ccm_mode, ecc_dh, and ecc_dsa. Fixes to these tests and
subsystems affected by the changes will be provided.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
After Andy Gross submitted a package for the Device Tree Compiler
(dtc), and it has now become available on the MSYS2 package
repository, it's no longer needed for the user to manually compile
the DTC.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Some of the networking header files in include/net/ directory were
missing @defgroup doxygen directives.
There was also duplicate @defgroup directives which are now changed
to @addtogroup directives.
Added also missing API links to doc/api/networking.rst file.
Added exceptions to .known-issues/doc/networking.conf file so that
doxygen does not complain.
Jira: ZEP-2308
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
GitHub notices a CONTRIBUTING file in a repo's root and will
automatically
add a link to this file on the page when a contributor creates an Issue
or opens a Pull Request. (Expectation is CONTRIBUTING will have
information about how to contribute to the project, format code,
test fixes, and submit patches.
We also want to have this document accessible from our technical docs,
and not duplicate the content, so add linkage to make this work.
The zephyrproject github wiki article that contributed to this new
CONTRIBUTING doc will be made into a reference to this new doc once
this PR is approved and merged.
Replaces PR #929
Jira: ZEP-2085
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
When installing packages with PIP, recommend --user so that it is
installed in the user's directory vs system wide, potentially
overriding system-wide files that are under package manager control
and introducing possible security issues.
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Avoid overriding files in the system that shall be under package
manager control with who knows what is downloaded that day, as it can
introduce security issues.
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
By having this as a Python script rather than a host executable, this
should simplify the build process on non-Unix platforms.
With this change, pyelftools is now required to build Zephyr. Please
consult the getting started documentation for your host platform for
installation instructions.
Jira: ZEP-2062
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
List all required modules in one file and just call pip with this
file to install all needed modules instead of listing them
individually.
Added gitlint and pyocd and other required packages to the list.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Instead of a configuration options index in "discovered" order
during the walk of the Kconfig files, create the index in alphabetic
order.
Also added a more descriptive name above the displayed table and added
table headings.
jira: ZEP-2310
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Add an initial implementation for the Bluetooth Mesh Profile
Specification. The main code resides in subsys/bluetooth/host/mesh and
the public API can be found in include/bluetooth/mesh.h. There are a
couple of samples provided as well under samples/bluetooth and
tests/bluetooth.
The implementation covers all layers of the Bluetooth Mesh stack and
most optional features as well. The following is a list of some of
these features and the c-files where the implementation can be found:
- GATT & Advertising bearers (proxy.c & adv.c)
- Network Layer (net.c)
- Lower and Upper Transport Layers (transport.c)
- Access Layer (access.c)
- Foundation Models, Server role (health.c & cfg.c)
- Both PB-ADV and PB-GATT based provisioning (prov.c)
- Low Power Node support (lpn.c)
- Relay support (net.c)
- GATT Proxy (proxy.c)
Notable features that are *not* part of the implementation:
- Friend support (initial bits are in place in friend.c)
- Provisioner support (low-value for typical Zephyr devices)
- GATT Client (low-value for typical Zephyr devices)
Jira: ZEP-2360
Change-Id: Ic773113dbfd84878ff8cee7fe2bb948f0ace19ed
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Kinetis boards now have a makefile variable to select the flash/debug
scripts based on the OpenSDA firmware. Update the general OpenSDA
documentation accordingly.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
New top-level dts/ folder and description added.
Fixed error in bullet list in subsys/ description (needed
a blank like before the list.
Alphabetized folder list (subsys/ was listed after tests/)
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Upcoming memory protection features will be placing some additional
constraints on kernel objects:
- They need to reside in memory owned by the kernel and not the
application
- Certain kernel object validation schemes will require some run-time
initialization of all kernel objects before they can be used.
Per Ben these initializer macros were never intended to be public. It is
not forbidden to use them, but doing so requires care: the memory being
initialized must reside in kernel space, and extra runtime
initialization steps may need to be peformed before they are fully
usable as kernel objects. In particular, kernel subsystems or drivers
whose objects are already in kernel memory may still need to use these
macros if they define kernel objects as members of a larger data
structure.
It is intended that application developers instead use the
K_<object>_DEFINE macros, which will automatically put the object in the
right memory and add them to a section which can be iterated over at
boot to complete initiailization.
There was no K_WORK_DEFINE() macro for creating struct k_work objects,
this is now added.
k_poll_event and k_poll_signal are intended to be instatiated from
application memory and have not been changed.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add details about that fact that ram/flash params on the board yaml are
specified in terms of Kilobytes. Also what the defaults are if they are
not specified.
Clarified that ignore_tags is meant for ignoring something from both
build and running. (I can see adding a tag for tests we build, but
ignore that we can run).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
A couple of docs were created in previous PRs with board support
information common to a few boards. Move these to a new section
for "Board Support Tools". (I debated about hiding them completely
but decided it would still be useful to have these tool docs appear
in the table of contents, just not embedded with the supported boards
docs.)
Moved these board tools docs over to the doc/ folder and out of
boards/ and removed these pages from the navigation index.
JIRA: ZEP-2285
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Add general release information to the release-notes index page
(currently just a set of links to the release-specific pages).
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
fixed literalinclude warning that referenced beyond end of file and
added lineno-start option to show correct line number of included file
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Having tried and tested building Zephyr using the standard SDK on
Windows 10 using the new WSL (Windows Subsystem for Linux), add the
documentation so that others can benefit from the functionality.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This patch adds documention for device tree development in Zephyr. This
includes a description of device tree, how it is integrated into Zephyr,
and other related information.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Some users started the wrong shell (MinGW) and ended up having build
issues, added a note about starting the right shell.
Jira: ZEP-2004
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Fixed documentation and updated config files for xtools to be used with
the latest version of crosstool-ng (1.23)
Jira: ZEP-616, ZEP-2146
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
With the required patch already being upstream, we can now redirect
users to the standard vanilla DTC tree.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
MinGW is old and unsupported, and it does not even download properly
these days. Remove the instructions that rely on MinGW since they are
only confusing for people trying to build on Windows.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add instructions to build the DTC from Windows, note that the following
2 caveats apply:
* The flex version needs to be pinned to 2.6.0 because of a bug with the
current MSYS2 flex
* The repository to clone DTC from is currently my own on GH while
waiting for a patch to be accepted upstream
Additionally this removes the python2 requirement and adds documentation
on installing pip an pyaml.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
It's not obvious which kernel release version you're reading about in the
documentation. Add the version info in the breadcrumb header (instead
of "Home / Docs / Subsystems /" show as
"Home / Docs / 1.8 / Subsystems /").
(Depends on docs-theme PR-9, but can be merged now with no ill-effect)
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
This patch amounts to a mostly complete rewrite of the k_mem_pool
allocator, which had been the source of historical complaints vs. the
one easily available in newlib. The basic design of the allocator is
unchanged (it's still a 4-way buddy allocator), but the implementation
has made different choices throughout. Major changes:
Space efficiency: The old implementation required ~2.66 bytes per
"smallest block" in overhead, plus 16 bytes per log4 "level" of the
allocation tree, plus a global tracking struct of 32 bytes and a very
surprising 12 byte overhead (in struct k_mem_block) per active
allocation on top of the returned data pointer. This new allocator
uses a simple bit array as the only per-block storage and places the
free list into the freed blocks themselves, requiring only ~1.33 bits
per smallest block, 12 bytes per level, 32 byte globally and only 4
bytes of per-allocation bookeeping. And it puts more of the generated
tree into BSS, slightly reducing binary sizes for non-trivial pool
sizes (even as the code size itself has increased a tiny bit).
IRQ safe: atomic operations on the store have been cut down to be at
most "4 bit sets and dlist operations" (i.e. a few dozen
instructions), reducing latency significantly and allowing us to lock
against interrupts cleanly from all APIs. Allocations and frees can
be done from ISRs now without limitation (well, obviously you can't
sleep, so "timeout" must be K_NO_WAIT).
Deterministic performance: there is no more "defragmentation" step
that must be manually managed. Block coalescing is done synchronously
at free time and takes constant time (strictly log4(num_levels)), as
the detection of four free "partner bits" is just a simple shift and
mask operation.
Cleaner behavior with odd sizes. The old code assumed that the
specified maximum size would be a power of four multiple of the
minimum size, making use of non-standard buffer sizes problematic.
This implementation re-aligns the sub-blocks at each level and can
handle situations wehre alignment restrictions mean fewer than 4x will
be available. If you want precise layout control, you can still
specify the sizes rigorously. It just doesn't break if you don't.
More portable: the original implementation made use of GNU assembler
macros embedded inline within C __asm__ statements. Not all
toolchains are actually backed by a GNU assembler even when the
support the GNU assembly syntax. This is pure C, albeit with some
hairy macros to expand the compile-time-computed values.
Related changes that had to be rolled into this patch for bisectability:
* The new allocator has a firm minimum block size of 8 bytes (to store
the dlist_node_t). It will "work" with smaller requested min_size
values, but obviously makes no firm promises about layout or how
many will be available. Unfortunately many of the tests were
written with very small 4-byte minimum sizes and to assume exactly
how many they could allocate. Bump the sizes to match the allocator
minimum.
* The mbox and pipes API made use of the internals of k_mem_block and
had to be ported to the new scheme. Blocks no longer store a
backpointer to the pool that allocated them (it's an integer ID in a
bitfield) , so if you want to "nullify" them you have to use the
data pointer.
* test_mbox_api had a bug were it was prematurely freeing k_mem_blocks
that it sent through the mailbox. This worked in the old allocator
because the memory wouldn't be touched when freed, but now we stuff
list pointers in there and the bug was exposed.
* Remove test_mpool_options: the options (related to defragmentation
behavior) tested no longer exist.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Unline k_thread_spawn(), the struct k_thread can live anywhere and not
in the thread's stack region. This will be useful for memory protection
scenarios where private kernel structures for a thread are not
accessible by that thread, or we want to allow the thread to use all the
stack space we gave it.
This requires a change to the internal _new_thread() API as we need to
provide a separate pointer for the k_thread.
By default, we still create internal threads with the k_thread in stack
memory. Forthcoming patches will change this, but we first need to make
it easier to define k_thread memory of variable size depending on
whether we need to store coprocessor state or not.
Change-Id: I533bbcf317833ba67a771b356b6bbc6596bf60f5
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
added some additional unicode character replacements for
those encountered (will fix those references after this PR)
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
More general spelling fixes, and cleaning up stray UTF-8 characters
such as curly-quotes, em- and en-dashes. Use replacement strings
for |reg| and |trade|.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Version 1 kernel (release 1.5 and earlier) is far enough from memory now
to remove the "version 2" wording in the kernel documentation and just
call it "the kernel".
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
We're moving the project code to GitHub folks, so change references
in the documentation from gerrit over to GitHub:
https://github.com/zephyrproject-rtos/zephyr
Change-Id: Ic491a62ed43fc799eb5698e92435cb6eb4d89394
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Per Anas, remove references to the pre-1.5 release documentation
Archived content is still accessible if you know where it is:
https://www.zephyrproject.org/doc/1.3.0/ (for example)
Change-Id: Ia17c9ff04a76b86516f804794d6e3adb1cc2980d
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The installation instructions for Ubuntu 16.04
needed to be updated to use the correct packages
rt:40021
Change-Id: Ia6bfb66b7d24dda2556b76a495988eea20037607
Signed-off-by: Jessica Wagantall <jwagantall@linuxfoundation.org>
The TX side of network data flow was changed so update the
network architecture documentation.
Change-Id: I88680a776dfe87a8dac868cba1b536f2c926c0cd
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Sphinx has a builder option that we can use to check links
(invoked with '$ make linkcheck' in the /doc folder)
Add some configuration tweaks to conf.py, and update the
Makefile to also use the nitpick (-n) option to Sphinx
if this linkcheck build option is selected (does much more
checking of internal references)
Change-Id: Ib413bc8d4195c72f1a8a4c345a5a722f88fad8b8
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
fixed using a :ref: instead of a hard link as well
Change-Id: I383ef137934f0c616b9a98159980b954ca1b8871
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Incorrect quoting left a :option: inline tag in the generated output
Change-Id: Iab2e4be692e138cf01f1cc276e830b2cb0e41b03
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Initial version of some document to capture the secure coding
practices used in the Zephyr project.
Signed-off-by: David Brown <david.brown@linaro.org>
Change-Id: Ic20546a7af832dc7bd193eb91ed44f1badc3ab87
Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types.
Jira: ZEP-2051
Change-Id: I731cc91517436685836023cbda34f894586a54bc
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Most of these macros are not exactly exposing a buffer, but a specific
header pointer (ipv6, ivp4, ethernet and so on), so it relevant to
rename them accordingly.
Change-Id: I66e32f7c3f2bc75994befb28d823e24299a53f5c
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There have been long lasting confusion between net_buf and net_nbuf.
While the first is actually a buffer, the second one is not. It's a
network buffer descriptor. More precisely it provides meta data about a
network packet, and holds the chain of buffer fragments made of net_buf.
Thus renaming net_nbuf to net_pkt and all names around it as well
(function, Kconfig option, ..).
Though net_pkt if the new name, it still inherit its logic from net_buf.
'
This patch is the first of a serie that will separate completely net_pkt
from net_buf.
Change-Id: Iecb32d2a0d8f4647692e5328e54b5c35454194cd
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
ztest has a number of assert style macros and used a baseline assert()
that varies from the system definition of assert() so lets rename
everything as zassert to be clear.
Change-Id: I7f176b3bae94d1045054d665be8b5bda947e5bb0
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
DNS resolving is better done with DNS resolve API so remove
the DNS client API which is quite hard to use.
Change-Id: Ide4973a5be674414ea6e04a35c938195cce40b6a
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add substitution patterns for (r), (tm), and (c) special symbols
via |reg| |trade| and |copy| (same names as html entities
e.g., ® )
Change-Id: I0d4932435107a0bb9eef7c319c9307883e00bcb5
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
A legacy sample was remove, so delete reference to it.
Change-Id: Ibd2d5fd25d799974bf60fe18847262ecbc0d3ea4
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
fix reference to net/buf.h to include/net/buf.h
Change-Id: I29514b5f48e6f0eefb0ed53185ed3b1de2a2f3f4
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
fix reference to include/toolchain/gcc.h
Change-Id: I5999e17a5aed7c2f2e9cce40750815be30b6de53
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
fix references to include/logging/sys_log.h
Change-Id: Ia0a83cbc65a39a176c5ccd71418272047e8cd3f1
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
fix :file: reference and add :ref: tag
to a mentioned sample
Change-Id: I46a66537b7cf7c89ba19e461f3a2872174cda33d
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
fix :file: reference to include/misc/ring_buffer.h
Change-Id: I0d7b32150ef66757fb6e5328c0e1b1bc6b9f3e55
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Add a few bullet points on the capabilities of the BLE controller.
Change-Id: I4fa0098d31e87c6a13e8ae7c0e1a212e81bb2742
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add more information to networking IP stack overview
documentation.
Change-Id: Ie179c4bf2a5716b9c85b4f8899fe61033510b90d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Fix heading hierarchy in new per-release release notes docs.
Add label to release-notes.rst doc.
Tweak a heading that was picked up as a left-over git marker.
Change-Id: I3e0ec6e1a0c59b05b1a58a32b3484bbeb89cf0f0
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Update the supported features list for Bluetooth.
Change-Id: I25f029106852794bcae1163ce1a1162d78c68d24
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If that's not done and user forgets that they still have TAP interface
active, it may lead to all kinds of address conflicts and routing
problems.
Change-Id: Ib7b64d5e7fcaf2695ff6693a0f0513d16b8907ad
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Add more installation details for building zephyr on Windows
including what to do with the ISSM tar.gz file that's
downloaded, proxy settings if behind a firewall, adding tar
to the dependencies (needed to extract the ISSM tar.gz file),
linking to the downloads page for the ARM toolchain, and
fixing command lines to correctly use `make BOARD=`. Verified
instructions work on a Windows 10 system.
Change-Id: I04e5f8e46df7630868568b90388dc65bb9baa4c9
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Also recommend dfu-util on Mac OS, as it's the recommended flashing
method for Arduino 101 and 96Boards Carbon.
Change-Id: I91d5a8323330ee31cc2165336e4a0a7fdd23dbcf
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
Since MSYS2 is far more stable, reliable, maintained and easy
to set up than MinGW as a Windows development environment,
default to it for the official Windows Getting Started guide,
including instructions to compile for both x86 and ARM with it.
Change-Id: Iaba61498b3b16a8ee1edbff953de16c275282c7b
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The only copy of the release notes for releases prior to 1.6 is on
the zephyrproject.org/downloads site. Preserving the release notes
history in the git repo would be a good thing. Here are the notes
for 1.5 (more to come).
Also added an auto table-of-contents header to make it easier to
navigate.
Change-Id: Ibd8b5a8d3816f7f5c376216adc2d52bb9467214d
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
A recent mailing list question asked for clarify about
the duration and period parameters for starting a timer.
Change-Id: I9bf8dd93dbbb9bbb94c95c2d7072f446ea1d6b01
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Since we recommend using dfu-util to flash the Arduino 101 board,
it should be mentioned in the list of packages to be installed.
Also fix indentation.
Change-Id: Iafc053c1b07e79bd7d02059b46a842c25ebaaf64
Signed-off-by: Patrice Buriez <patrice.buriez@intel.com>
Update documentation on using a Windows host for doing Zephyr development
using ISSM toolchain and console commands in a mingw environment
Jira: ZEP-1177
Change-Id: I3e4edec26a430f424427734dfe407a185ace8434
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Move ip porting guide from the subsystem/networking section to the porting
section of the documentation. Tweak the layout of the doc for improved
readable too.
Jira: ZEP-825
Change-Id: I688151f1da8862a783a82bcd4dde654c5178c30f
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Updated supported OSes to Fedora 25 and Ubuntu 16.04 LTS
Updated Zephyr SDK package name to reflect actual name
ZEP-1480
Change-Id: If7d79785009db8eb50028ff664ac7fc26eff79b5
Signed-off-by: Evan Couzens <evanx.couzens@intel.com>
rtd theme prevents table headings and content from wrapping and can
cause tables to display to wide. This patch overrides that CSS.
Change-Id: I4885b959a0dd075ff4c8edb9cfb4b17a611e6775
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Don't need to have the user guess the URL.
Change-Id: Ifdad9c4d1034dc541b4a84999a12b4070a9130c0
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
If netcat is used with UDP, then one cannot press CTRL-c
as netcat returns immediately to the caller. For TCP the
CTRL-c is needed so move the note to TCP section of this
document.
Change-Id: I936a89e7a7ce8318602c3deae8513007a4620c80
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
the existing Kbuild is missing the path and needed python script
has new dependencies on yaml package also split the long line shorter ones.
Change-Id: I34fdd2ff70b2d76b0e2af6f78f2980d20651b12d
Signed-off-by: Rishi Khare <rishi.khare@intel.com>
Put them in order where they are most likely to be useful.
Change-Id: Ia9c358a096556a9838b2b69311e10aba3b9ca587
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
Commit 7cb8a16c86 ("doc: restructure application primer") removed
the section documenting the build system support for third party
libraries. Restore this section making a few editorial changes to
ensure the text sits well in its surroundings.
Jira: ZEP-1733
Change-Id: Ie62b956732f36fac70b392eeee880acebaef6cf9
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Promote a glossary.rst up into the doc/ folder, merge wiki
glossary entries (and remove from the wiki), and format use
the .. glossary directive to allow references by using the
:term: role (using :term:`ISR` will make a link to the
glossary entry for ISR)
Jira: ZEP-1321
Change-Id: Ie1461037ab456371604594488f01df9f21284561
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Gerrit patch https://gerrit.zephyrproject.org/r/#/c/10849/
created a doxygen folder that make clean should remove
Change-Id: I5cd4dea489c868eef4f101c20cced3280b7abc39
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Depending on the version of Python 3 the user has installed, 'open'
may default to using 'ascii' encoding. Since the documentation is in
UTF-8, and contains characters beyond 'ascii', this will result in
failures when using these versions of Python.
Fix this by being explicit about the encoding to be used when reading
these files.
Signed-off-by: David Brown <david.brown@linaro.org>
Change-Id: I54c69334c6bf377f1135cec04f4e0ea96a8e9a5b
Permalinks make it much easier to create html links to specific sections
in a document (you over over the section heading and an icon appears that
you can click on to get a reference link directly to that section).
Change-Id: I905449158f834783b9df6c04bf5fa3e5f245b3fd
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Rename file to zephyr.doxyfile to allow integration in eclipse and make
it build locally in the doc/ directory without have to change to ../
first.
Change-Id: Ib2c4c26f385b050ea3d0e814ebfc3509f31e5e12
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This one will quickly describe how the L2 concept fits into the network
stack, what is its role and how device drivers are then made.
Jira: ZEP-824
Change-Id: Ib5d49a5194fe4f67ad1196266ad09f40d732d5ee
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This commit changes the net_buf getter functions in nbuf.h
by adding a timeout parameter. These function prototypes
are changed to accept a timeout parameter.
net_nbuf_get_rx()
net_nbuf_get_tx()
net_nbuf_get_data()
net_nbuf_get_reserve_rx()
net_nbuf_get_reserve_tx()
net_nbuf_get_reserve_data()
net_nbuf_copy()
net_nbuf_copy_all()
net_nbuf_push()
net_nbuf_append()
net_nbuf_write()
net_nbuf_insert()
Following convinience functions have not been changed
net_nbuf_append_u8
net_nbuf_append_be16
net_nbuf_append_be32
net_nbuf_insert_u8
net_nbuf_insert_be16
net_nbuf_insert_be32
net_nbuf_write_u8
net_nbuf_write_be16
net_nbuf_write_be32
so they call the base function using K_FOREVER. Use the
base function if you want to have a timeout when net_buf
is allocated.
Change-Id: I20bb602ffb73069e5a02668fce60575141586c0f
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Copy the documentation from the Wiki over here, the cross linking
between online documentation and Wiki and duplication of information was
inconsistent and confusing. Put everything in one place.
Change-Id: Ia3aaec1b431477e2ec54dbec2ccaa655870b0ee3
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This document describes the changes in Zephyr 1.7 networking
stack compared to Zephyr 1.6. This document is a high level
description of the changes between these two major Zephyr releases.
For individual changes, the application developer can find more
details in the network header file documentation in include/net/*.
Change-Id: I281d670bee0c08e07c28fc423157ddb3f2bec8f1
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
These interrupts are for ISRs that need the lowest possible latency.
They do not take parameters and are installed directly in the interrupt
vector table.
Issue: ZEP-1038
Change-Id: I7583e9191dd32d9253ad933181d2103a6e191dea
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Document building now copies files from the boards/ and samples/
folders into the doc/ folder, but didn't delete these copies after
the build. Remove the copied folders after the docs are built and
include removing these folders in the make clean actions.
Jira: ZEP-1650
Change-Id: Id5f04a53f0d865bd4211138a35852ac8ab115239
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The Initialization section contains two errors:
1. bt_enable() is the public API for initializing the stack, not
bt_init().
2. When bt_enable() is passed a function pointer, initialization
happens asynchronously, not synchronously.
Fix these.
Change-Id: If02a6d6fe82f546b5cb6f9fdf76c6641baa6cac8
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
Updated main menuconfig image
Jira: ZEP-1434
Change-Id: Ib78f65868e025a45d51f1561f7e487eda0d7dbcd
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
All mandatory and most of optional PTS tests are passing.
The only not supported optional tests are sending of Test,
RPN and RLS which is not required at the moment.
Change-Id: I5a92d30c0d44803baf6c705d86f2272e4e57fd18
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Add SENSOR_CHAN_*_XYZ enum values to be used instead of
SENSOR_CHAN_*_ANY, because the new naming takes into account that
they are used to fetch all the 3 axes for a channel (X, Y and Z)
and not just any number of them.
Also deprecate old SENSOR_CHAN_*_ANY enum values.
Change-Id: I59e9901c1f8879d084bdb7c95583c2b28aa1e025
Signed-off-by: Bogdan Davidoaia <bogdan.davidoaia@linaro.org>
Current version of IP stack supports both IPv4 and IPv6 at the same time.
Use 'threads' instead of 'fibers' in documentation.
Jira: ZEP-1623
Change-Id: Ib8210f32775ac55fe2c346cd81ed263ffe472b28
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Update line numbers for included example code to reflect changes in the
source files.
Change-Id: Iceeed0a8b6df91746cf58d23fe09a03713a07d98
Signed-off-by: Bogdan Davidoaia <bogdan.davidoaia@linaro.org>
The headings on some .rst files were not following the expected
heading order of using # for h1, * for h2, = for h3, and - for h4
This patch fixes that, and the doc/templates/*.tmpl files created
for folks to use as templates for creating board and sample docs.
Change-Id: I0263b005648558d5ea41a681ceaa4798c9594dd9
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.
Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.
Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file. Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.
Jira: ZEP-1457
Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Updated the README.rst describing how to setup the document building
tools on an Ubuntu system (listing versions of tools) and how to
generate a local copy of the html documentation.
Change-Id: I4ca1a99a48709b2313c479487abf42480c5af035
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
make build process less verbose and enable 'make htmldocs' from the top
tree without a need for ZEPHYR_GCC_VARIANT to be defined.
Change-Id: I385667e3d240205913fa806b7481d5ed4e83fbc4
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Running documentation scripts on the top directory shifted all links one
level dowwn and is breaking all incoming links.
Use a script to copy all RST files into the doc/ directory before
running sphinx and keep structure intact.
Jira: ZEP-1579
Change-Id: Iccff068430e2ddb29e172cd8ae920475815d199e
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Remove the type field from the sensor value structure. All values will
have the type previously defined by SENSOR_VALUE_TYPE_INT_PLUS_MICRO.
This simplifies the interface, as apps will know what value type to
expect. Apps that prefer to use double values can optain them using the
sensor_value_to_double function.
Change-Id: I3588d74258030eb16c3f89d8eead13cca4606b18
Signed-off-by: Bogdan Davidoaia <bogdan.davidoaia@linaro.org>
Renames the Kinetis SDK (ksdk) to the MCUXpresso SDK (mcux) to reflect
the recent rebranding by NXP to include support for LPC and i.MX SoCs.
Temporarily leaves the config option HAS_KSDK to allow renaming each
shim driver in a separate commit.
Change-Id: I738f3687755fcd429a105e723fa25f1da815b519
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
select is more intuitive and easy to remember, and it is shorter too :)
Change-Id: Icc79e5cb88163344c1e2fcf65e313c33c4afa2cc
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This will replace the current goal of 'make qemu' with 'make run' and
moves Qemu handling into its own file and into the boards instead of
being architecture specific.
We should be able to add new boards that support some other type of
emulation (by adding scripts/Makefile.<emu type>) and allow the board to
define their own options for the use type of emulation.
'make qemu' will still work, however it will be deprecated, starting
with this commit it is recommended to use 'make run'.
Jira: ZEP-359
Change-Id: I1cacd56b4ec09421a58cf5d010e22e9035214df6
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use the existing debugserver target also for Qemu debugging. Qemu
should be maintained as one of many emulation/simulations platforms and
emulation should be abstracted in the Makefiles and not tied to Qemu.
qemugdb will still work, it is however being deprecated.
Change-Id: I0cd10fb66debb939b8f7f1304bf2ef4605da6a1d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Re-add board documentation and integrate into the project online
documentation.
Setup sphinx to pick any new board documentation added to boards/*.
Change-Id: Id208d5ef923f8806135879dd33a55ed527dc5f27
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This will allow inclusion of documentation files that exist outside of
doc/ and will make it possible to add rst files across the tree,
especially for boards, samples and tests.
Change-Id: I7afcf92d99f504b2bc0b2b7e3452acb2f8e08294
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In the documentation you can now reference issues in JIRA using the
following macro:
:jira:`ZEP-308`
This will link to the JIRA in the macro.
Change-Id: I3785d4abd243f5c5b75e9e3b58a449e2a3225415
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This moves the shell component into its own subsys and groups all
related files and options into a single place.
Additionally, one Kconfig option will now be required to enable the
shell:
CONFIG_CONSOLE_SHELL=y
The header files was also moved to include/shell/shell.h and can be now
referenced with
#include <shell/shell.h>
instead of
#include <misc/shell.h>
Updated documentation as well.
Change-Id: Iffbba4acfa05408055e9fd28dffa213451351f94
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Introduce random device API analgous to other device driver classes in
Zephyr. Modify the the KSDK random driver to implement the API.
We retain the sys_rand32_get() interface for now on the assumption it
will eventually relocate to or be otherwise replaced by an entropy
management system.
The existing TEST_RANDOM_GENERATOR related drivers that do not
generate entropy are not modified to expose this driver API since they
cannot generate entropy.
Change-Id: I60b2d5afddf242e802a1d9014c99579870fb7472
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Instead of including the rtd theme in zephyr use an installed instance,
if nothing is installed, use the default zephyr theme.
Change-Id: Ife4bd878e3f879cf59ecf2bc5d186a531a3bf1b6
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Merge build system and application primer into one and put
all in one file to make it easier to follow.
Jira: ZEP-686
Change-Id: I64ec7ef7a6aa2ad80496ca0ee3ddc3d7fe09a5d7
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This is obsolete and not available anymore in the unified kernel.
Change-Id: I39f6afd5285a2286fe954bd8dc501f888d0d9003
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add GCCARMEMB_TOOLCHAIN_PATH and ZEPHYR_GCC_VARIANT to
getting_started.rst per ZEP-1027
Change-Id: Ia73697c66562e02a6d93afdac6cc92e327189abe
Signed-off-by: Evan Couzens <evanx.couzens@intel.com>
Move logging out of misc/ to its own subsystem. Anything related to
logging and any new logging features or backends could be added here
instead of the generic location in misc/ which is overcrowded with
options that are not related to eachother.
Jira: ZEP-1467
Change-Id: If6a3ea625c3a3562a7a61a0ba5fd7e6ca75518ba
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
nano_cpu_idle/nano_cpu_atomic_idle were not ported to the unified
kernel, and only the old APIs were available. There was no real impact
since, in the unified kernel, only the idle thread should really be
doing power management. However, with a single-threaded kernel, these
functions can be useful again.
The kernel internals now make use of these APIs instead of the legacy
ones.
Change-Id: Ie8a6396ba378d3ddda27b8dd32fa4711bf53eb36
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Using a LIFO instead of a FIFO has the potential benefit that more
recently in-use buffers may be "cache-hot" and therefore accessed
faster than least recently used (which is what we get with a FIFO).
Change-Id: I59bb083ca2e00d0d404406540f7db216742a27cf
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In order to keep the initialization process light-weight, remove
net_buf_pool_init() and instead perform the initialization of the pool
and buffers in a "lazy" manner. This means storing more information
in the pool, and removing any 'const' members from net_buf. Since
there are no more const members in net_buf the buffer array can be
declared with __noinit, which further reduces initialization overhead.
Change-Id: Ia126af101c2727c130651b697dcba99d159a1c76
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Until now it has been necessary to separately define a k_fifo and
an array of buffers when creating net_buf pools. This has been a bit
of an inconvenience as well as blurred the line of what exactly
constitutes the "pool".
This patch removes the NET_BUF_POOL() macro and replaces it with a
NET_BUF_POOL_DEFINE() macro that internally expands into the buffer
array and new net_buf_pool struct with a given name:
NET_BUF_POOL_DEFINE(pool_name, ...);
Having a dedicated context struct for the pool has the added benefit
that we can start moving there net_buf members that have the same
value for all buffers from the same pool. The first such member that
gets moved is the destroy callback, thus shrinking net_buf by four
bytes. Another potential candidate is the user_data_size, however
right not that's left out since it would just leave 2 bytes of padding
in net_buf (i.e. not influence its size). Another common value is
buf->size, however that one is also used by net_buf_simple and can
therefore not be moved.
This patch also splits getting buffers from a FIFO and allocating a
new buffer from a pool into two separate APIs: net_buf_get and
net_buf_alloc, thus simplifying the APIs and their usage. There is no
separate 'reserve_head' parameter anymore when allocating, rather the
user is expected to call net_buf_reserve() afterwards if something
else than 0 headroom is desired.
Change-Id: Id91b1e5c2be2deb1274dde47f5edebfe29af383a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Fix compilation issues that show up if SYS_LOG is mapped to printk
instead of printf. Unlike printf, printk is annotated so that the
compiler catches incorrect format specifiers passed to it.
Change-Id: Iab7cc6da110e9c98720211a6f773dcf055a3a411
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
As the Contiki uIP stack is no more there remove any reference
to it. The path to IP stack is also set correctly.
Change-Id: Ia2e10514f173cf8083d6dd258111a901987bd038
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This doc goes through how to request something, or listen to a network
event. As well as it describes how to create a request handler and how
to throw a network event.
Change-Id: I07cc6d22a14e7f1a0f239f97982c984fd13379d6
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This change is related to patch called
"net: Adapt to new behavior of net_buf_frag_add"
This version removes extra net_nbuf_unref() from
the code. The unref was done because net_buf_frag_del()
did not remove the double ref from the list element.
Because of the other patch, the list does not have
double ref any more, so we need to remove the extra
unref in couple of extra places.
Change-Id: If90e01c24b9b4e68afbfa283850d2a1ecb3065ed
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Explain how to use net_context connectivity API.
Change-Id: Ifa57af3e05ca424dfbd30a17608a1dd59646caf9
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This document describes the network stack architecture of the
new IP stack.
Change-Id: I19f7c77c66115e6453bcde0d41bb7cada3efc5e1
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Revise the document to reflect the latest changes including
the updated concept of SOC interface instead of PMA. Simplified
and enhanced areas that were known to cause confusion. Added
descriptions of new APIs and usages.
Jira: ZEP-1386
Change-Id: I5fa74d85245924f512c22d9d977dd0c9ea62b6ce
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Makes the purpose and capabilities of the kernel event logger
clearer, and leaves much of the low-level detail relating to
use of the configuration options and APIs to the configuration
option guide and API guide, respectively. Also corrects some
bugs in the example code for retrieving event information.
Also updates the API guide to make a clear distinction between
the general purpose event logger framework and the kernel event
logger (which is a specific instance of this framework).
Change-Id: I924f65092b2b0e5050af13376b5da85a6cdc1a65
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The Bluetooth documentation is found in doc/subsystems/bluetooth and
not in doc/bluetooth.
Change-Id: I7e7010b5ae4a26ea552d75f1a095baec18d02630
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Also fixes up Kernel Primer examples to use these macros.
Change-Id: Ib1bc9e3f85ab75f81986bc3930fb287266a886b5
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Rewrites the example of a timer's expiry routine offloading
processing that can't be done at interrupt level. The example
now submits work to the system workqueue directly, rather than
using an alert. This saves footprint by eliminating the need
for alert-related API support that isn't needed. (This is a
true savings, since the alert code just called the same
workqueue APIs the example now calls directly.)
Change-Id: I378e40aef33014f2c75c4f57531f75247d50e479
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Also adds a link to function-type API that was missing.
Change-Id: Ie671ad2f239cdca3ac1a2eb33248dfecfa251c79
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Replaces confusing (and excessively long) configuration option
names with more intuitive names. Also enhances the description
of each option to clarify its use.
Change-Id: If4d4541407627482b1e90302cfc9df3bc8130d44
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
* Ensures all references to kernel functions are correctly
tagged so they will auto-link to the API guide.
* Adds references to a few functions and macros that were
omitted.
Change-Id: I26ccd9c29ea123db2807f2df4d05d574932c6849
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
In addition to providing documentaton, we also modify the static_lib
example to use outputexports instead of the double-include
Makefile.toolchain trick. For this to work well we need to fix a tiny
bug in the dependency handling in Makefile.inc.
Change-Id: I6571bc681bc34155f37cff1eccc2ea12ed52ef07
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Addresses a range of issues affecting the Kernel Primer or
the API Guide generated from doxygen tags.
* Ensures mailbox examples use kernel APIs correctly.
(Fix for ZEP-1262, as well as other errors).
* Ensures memory alignment limitations for memory slabs
are correctly described. (Fix for ZEP-1265.)
* Ensures memory alignment limitations for memory pools
are more clearly described. Also fixes a typo in a
memory pool example.
* Ensures memory alignment limitations for message
queues are more clearly described.
* Fixes references to a number of kernel configuration
options that were omitted or incorrectly formatted.
* Fixes a typo in an example of thread spawning.
Change-Id: I395186f333490b1e0c4223b87c0fe7136548770f
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Remove mentions of task & fiber from the description of using the
bt_enable() API.
Change-Id: Ia86a2396e5ce286cc7f9a1c183b4c98abf09d394
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The Zephyr kernel tree has imported or reuses packages, scripts that
are not covered by the Apache LICENSE.
As in some places it is not clear (there is no LICENSE file or way to
put it there), here we list them to ensure there is proper license
acknowledgement.
This is an initial proposal--I welcome feedback on everything,
especially where to link the documentation (kind of kludgy now) and
more missed components from this initial list.
v5: Added David Kinder's feedback
v4: Fixed more typos in Makefile
v3: fixed some more typos, but still holding on to feedback on how it
can be done with SPDX files, as it is not yet all clear to me.
Jira: ZEP-1079
Change-Id: Ie1bf545e26b0d304cd3ea0d70cdfc13d520197fe
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
This reverts commit d4d9ac2d21.
This is broken:
core:static_lib(master): sanitycheck -T .
Generating LALR tables
Cleaning output directory /home/nashif/Work/zephyr/sanity-out
Selecting default platforms per test case
Building testcase defconfigs...
1 tests selected, 28 tests discarded due to filters
total complete: 1/ 1 failed: 0
1 of 1 tests passed with 0 warnings in 0 seconds
Traceback (most recent call last):
File "//home/nashif/Work/zephyr/scripts/sanitycheck", line 1887, in <module>
main()
File "//home/nashif/Work/zephyr/scripts/sanitycheck", line 1879, in main
ts.testcase_report(LAST_SANITY)
File "//home/nashif/Work/zephyr/scripts/sanitycheck", line 1551, in testcase_report
rowdict["ram_size"] = goal.metrics["ram_size"]
KeyError: 'ram_size'
core:static_lib(master): find -name *elf
core:static_lib(master): make pristine
make -C mylib clean
make[1]: Entering directory '/home/nashif/Work/zephyr/samples/static_lib/mylib'
Makefile:19: *** $(O) is not set. Try `make all-mylib` from hello_world. Stop.
make[1]: Leaving directory '/home/nashif/Work/zephyr/samples/static_lib/mylib'
Makefile:37: recipe for target 'pristine' failed
make: *** [pristine] Error 2
Change-Id: I61700b0df34790aef94a6700c7c7e0605343787f
Signed-off-by: axy <anas.nashif@intel.com>
In addition to providing documentaton, we also modify the static_lib
example to use outputexports instead of the double-include
Makefile.toolchain trick.
Change-Id: Iafe045ccc5dbbbd4063f836cc63057b4b06f7727
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
An application-supplied main() routine is now considered to be
essential to system operation. Thus, if main() experiences an
error that aborts the main thread a fatal system error is raised.
Note: If main() completes its work and does a standard return-
to-caller the main thread terminates normally.
Change-Id: Icc9499f13578299244a856a246ad2a7d34a72f54
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This routine is non-existent. (Fix for ZEP-1240)
Change-Id: I85a538037aac000207f5f01414fb53810691d349
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
PRIMARY, SECONDARY, NANOKERNEL, MICROKERNEL init levels are now
deprecated.
New init levels introduced: PRE_KERNEL_1, PRE_KERNEL_2, POST_KERNEL
to replace them.
Most existing code has instances of PRIMARY replaced with PRE_KERNEL_1,
SECONDARY with POST_KERNEL as SECONDARY has had a longstanding bug
where the documentation specified SECONDARY ran before the kernel started
up, but actually ran afterwards.
Change-Id: I771bc634e9caf7f17dbf214a270bc9967eed7d32
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The convention for Zephyr sample names is to use _ instead of - for
delimiting words.
Change-Id: I08a63e9f600deb38183f81ddb8f8bf407b6eec2e
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There's no point in having both a doc/bluetooth and a
doc/subsystems/bluetooth. Move the PICS documentation to the right
place and convert it to rst in the same go.
Change-Id: Iada1f19d0ed3fb3b374e7f708f175d53d797bd93
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add information about the controller support, raw HCI interface and
the new location in the source tree.
Change-Id: I6fab7f17e4a96b8217cd9de4f2437cfba8c06564
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Symbols now use the K_ prefix which is now standard for the
unified kernel. Legacy support for these symbols is retained
to allow existing applications to build successfully.
Change-Id: I3ff12c96f729b535eecc940502892cbaa52526b6
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Move the Bluetooth host stack from net/bluetooth to
subsys/bluetooth/host. This is preparation for having both host and
controller under the same root, i.e. subsys/bluetooth/.
Change-Id: I3bc796f7e331fca0c485f3890d62b9c03e027b96
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The shell is not a kernel feature, it is more of a subsystem.
Change-Id: Iaba60b2086ddfe77af427d70b8fc8d06a8bebe14
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Alert section now covers the count limit argument, which was
recently added.
[Part of fix to ZEP-1186]
Change-Id: I8943f42cddf7d39b3e66d02b615c895835bca472
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Adds standard prefix to symbolic option that flags a thread
as essential to system operation.
Change-Id: Ia904a81ce343fdd1cd44caaaeae641d822777f9b
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Removes references to nanokernel/microkernel. Corrects numerous
errors in content. Improves consistency in presentation of
information.
Change-Id: I83895d2cb03181da377b23323afc104ae32865a2
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Ability to use Zephyr shell by multiple modules simultaneously, each
module for its own usage.
Old shell implementation enabled the user to call only one module
commands, not all of the modules simultaneously.
Change-Id: I0ef8fa2fd190b7490c44fe91d1016363258302c9
Signed-off-by: Yael Avramovich <yael.avramovich@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Removes reference to nanokernel/microkernel.
Change-Id: Ibac9c85570d7add45c1dbabc524cb5176c5a189d
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Removes references to nanokernel/microkernel and related obsolete
text.
Change-Id: I2b52243db7c580e14d18d39effee7d86428855d8
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Adapt text to reflect unified kernel changes, and also clean up
a few stylistics inconsistencies.
Change-Id: Ife6d97cae20c7feb974f17f54a47da583f1c1907
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Note that a new section will be created to discuss workqueues,
including the system workqueue.
Change-Id: I921511f117acb07768619418539bef5b6a2a0a72
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Semaphore groups are not supported by the unified kernel (other than
via the legacy APIs).
A select() or poll() type mechanism may be introduced in the future
to provide a more general capability for a thread to wait on multiple
kernel objects simultaneously.
Change-Id: I6cdf773ecb5954bd1b9a5caa9ca5cc29b2932d9a
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Adds thread option information. Corrects and enhances information
about the thread's stack area and the spawning of threads.
Change-Id: I881bc448abf0962599eff9c7d32f3760625b3c37
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Fifo section now mentions the existence of this capability, and
notes the associated APIs. (Including an example of using the APIs
is not done, since the amount of code needed to show the creation
of the list of data items is significant, and is likely of little
interest to most users.)
Change-Id: I0485cb7d6a35df48a5eab7f6e7a751ddf403625b
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Event is such an overloaded and generic term (event logger, *kernel*
event logger, "protocol" events in other subsystems, etc.), that it is
confusing for the name an object. Events are kinda like signals, but not
exactly, so we chose not to name them 'signals' to prevent further
confusion. "Alerts" felt like a good fit, since they are used to "alert"
an application that something of significance should be addressed and
because an "alert handler" can be proactively registered with an alert.
Change-Id: Ibfeb5eaf0e6e62702ac3fec281d17f8a63145fa1
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This better aligns with the actual functionality of the object.
Change-Id: I70abf54f994e92abd7367251089ea4f735d273fe
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The bt_driver API was created when Zephyr only had a Bluetooth host
stack, but no controller-side functionality. The only "driver" that
was needed for the host was the HCI driver, and hence "HCI" was
omitted from the name.
With support both for host and controller Zephyr will be getting more
Bluetooth driver types, in particular radio drivers. To prepare for
this, move all HCI drivers to drivers/bluetooth/hci/ and rename the
bt_driver API bt_hci_driver.
Change-Id: I82829da80aa61f26c2bb2005380f1e88d069ac7d
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
- replace instances of 'task' and 'fiber' with 'coop' and 'preempt'
thread
- remove reference to task monitor and task transition logging, since
this is a concept that is irrelevent in the unified kernel.
Change-Id: I31eef8d7894c45183f6a13cc3fdaa2e6214e8da3
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Aligns the APIs for defining a thread at compile time and for
spawning a thread at run time.
Change-Id: Ic5df450cbe4d0eb562fb4a608f1ac5a8a7cb4b96
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Ring buffer section now resides under "other" topic, since the
ring buffer type is a general purpose type (like the singly and
doubly linked list types), rather than a kernel-specific type.
Enhances ring buffer section to improve content and improve
consistency with the form used elsewhere in the Kernel Primer.
Also corrects a minor error in the ring buffer API documentation.
Change-Id: Icaa8661524f80e31f173adee859844cadb38967f
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Documentation is using an incorrect name for the macro available to
allocate memory maps.
Change-Id: Ic2a93d3851219cb91f3c9c01e2aa19e38913abdd
Signed-off-by: Rohit Grover <rohit.grover@arm.com>
Revises documentation for the kernel clocks to align it
with the actual behavior of the unified kernel.
Revises documentation for the kernel timer object type
to provide users with a more compact and intuitive API
that supports (directly or indirectly) the capabilities
of the now defunct microkernel timer and nanokernel
timer object types.
Note: A separate commit will be used to implement the
revised timer API described here.
Change-Id: Ifa4306c76e1c3e2aab1c0b55031df4179ac2a6b9
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
- Reorders parameters where necessary
- Adds alignment parameter to K_MSGQ_DEFINE() for buffer alignment
- Renames parameters where necessary so they are more intuitive
Change-Id: I0b53105c04109127897bf4790e6908082f82da4e
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
- Renames to K_MEM_POOL_DEFINE() for consistency
- Adds alignment parameter to align the pool buffer.
Jira: ZEP-926
Change-Id: I6cf0a1ce45c3a0fc5f0675047d8928659df1e75e
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
- Reorders parameters where necessary
- Adds alignment parameter to K_PIPE_DEFINE()
- Renames parameters where necessary so they are sync'd
between header and source files
Change-Id: I4f2367abc28aff646cc90beb9f08bb266e143b0c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Also tweaks the memory maps section so that the two sections
are laid out in a similar manner.
Change-Id: I3abd69dd7e6c65cd1d6a4f12b3b14aa1b166ca5b
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The driver config structure should be const, that can't happen until
various existing drivers are cleaned up, but it is safe for all
drivers that use config_info to treat it as const. Update the drivers
documentation to depict this usage.
Change-Id: I01507759be7d5c347a0eaf8068636d4a39a243e2
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Origin: Original
Change-Id: I0927c25fbbba5d4863f199d058d311c10d52d784
Signed-off-by: Jaakko Hannikainen <jaakko.hannikainen@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Point to a new wiki page for the documentation. The old page can be removed
once this patch is committed.
Change-Id: I2b031bfffe10ec24c41c58d0754f2b14d95f5e53
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Updated the device power management documentation to reflect
the updated API.
Change-Id: I6e4da7e1ae3642d28205504b8f19d9c8f9a08727
Signed-off-by: Keren Siman-Tov <keren.siman-tov@intel.com>
Interrupt stubs now just push the ISR and parameter onto the stack
and jump to the common interrupt code, never to return.
Change-Id: I82543d8148b5c7dfe116c43f41791f852614bb28
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
API documentation wasn't linking to important conceptual overview
material available in the primer documentation.
This will need to be done over again when we work on the combined
kernel documentation, but this will give us a peek at what that
will look like.
Jira: ZEP-746
Change-Id: Ib1142575272c72d93af8d409518d0d0a4304ef32
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Use the ReST metadata document title directive instead of
embedded javascript to assign a title to the configuration
options (Kconfig) reference guide pages. This will generate
a static <title> directive in the generated HTML instead
of relying on javascript.
Change-Id: Ib70a8b1f641a5ed72be774f0f5b2a93a2d1c9b8c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
This edit to the doxygen.config file causes Doxygen to treat
__deprecated as a predefined macro, which expands to nothing.
See https://wiki.zephyrproject.org/view/Function_Documentation#Workarounds
for further information about this workaround.
Change-Id: I8e344cf65d7ff45609d5dd9a0caec14df9799d46
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Add documentation for OS X users that want to compile
using an available 3rd-party cross compiler and also
complete the section to describe the existing support
for the GCC ARM Embedded toolchain.
Change-Id: I97d27d46c0048a49029dbe4d66fe141755c226e9
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
These needlessly confuse the parser. Define them as empty
predefined macros.
Change-Id: Iac6a909f278e1f8a757410612f64b1c46f67ff41
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Each tagged version of the documentation associated with a build is
available on the website. This patch adds the link to the 1.5.0 version.
Change-Id: I664ec08598eacbdccbdfb1a5cec3791ea879edb0
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Casual building in the tree leads to regular messups where I forget to
clean up the outdir first when switching platforms and the build fails
in strange ways.
Put a $(BOARD) subdirectory under outdir, and use that at $(O) when
the user does not provide an output directory.
Note that "make pristine" continues to remove the entire outdir,
including other architecutres (so as to make the tree pristine).
Also update a few spots where outdir was mentioned in documentation to
clarify the new scheme.
Change-Id: I365eec06ea440f17380b9f9ace5f5d34b9bed4dc
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Link to the 1.5 version of documentation shouldn't be added
to the documentation home page until AFTER the release documents
are pushed to the site. (I thought this would have been done when
the code freeze happened.) Remove the 1.5 link for now and wait
until after the 1.5 docs are pushed.
Jira: ZEP-730
Change-Id: Ia225c9ce3ffb52540fb43f105a3cd40e72d0cf4a
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Replaced the term "platform" with "board" or "SoC" depending
on context as per, ZEP-534.
Change-Id: I14c13d4eed429fe6e41e2221d6ff6afe97e942eb
Signed-off-by: Evan Couzens <evanx.couzens@intel.com>
Mac OS X guide had an unneeded transient variable.
JIRA: ZEP-616
Change-Id: I1a7cea35830bb786b67aee235337f89c62a4b69f
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
Adds documentation of file system APIs
Jira: ZEP-643
Change-Id: Ieac14a3dcf4913aeba6da2d3dc718eaa09b6cd88
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
This reverts commit d73a9bb9c6.
The patch was intended for 1.6.0 release.
Change-Id: Id42058b746a3d2a54e4b1a2983eb58bd10b1ed40
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Mac OS X set up instructions were missing some important details that
prevent a new user to set up Zephyr development environment on a not
yet configured system.
JIRA: ZEP-616
Change-Id: I0890ec5364a0ce21e38ba4101d285fc8e46a6bd8
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
update /doc/getting_started/installation_linux.rst with
ncurses package for both Ubuntu and Fedora systems
Jira: zep-478
Change-Id: Icd4ba5c2151e96330005e3e31f5ea50b437e4f18
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Contributor documents are moved to the wiki.zephyrproject.org site
Three references in existing documents updated to point to the wiki.
Change-Id: Ib902b9596020722cf8fec2fc064725f7406297ff
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Linux package update/upgrade instuctions were incomplete (on
Ubuntu the instructions updated the local database but didn't
actually do the upgrade). On Fedora, the dnf update command was
deprecated in favor of dnf upgrade.
Change-Id: I83e126cf924d9c3720fcfb77b0d5abda943a6af5
Jira: ZEP-516
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Contains an nRF52832 as the main SoC and a LPC11U35 that provides onboard
debugging capabilities and a USB-ISP interface.
Change-Id: Ie6457cc5586bda9bbc0c073f96d23cc2205332c5
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Board documentation was moved to wiki.zephyrproject.org and documents with
links to the corresponding wiki article left in their place. This fix
cleans up the figures (.png files) that were left behind and are no longer
needed here.
Change-Id: I9056046fd7c9307de750360e20d8f970ee7ae3b9
Jira: ZEP-564
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Backslashes need to be doubled up, otherwise they are interpreted like
a escape sequence and basically, dissapear. As part of this, suggest
the location of the default python installation *before* using it, for
simplicity.
Change-Id: I26ed80a7dd8c08277614dc49a3986848892ff844
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
The x86 architecture is no longer the only one that supports hardware
floating point operations.
Change-Id: Ib23e032f00661bab87a20872651b284580b8e7e5
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Updates the application build steps needed to rebuild your system.
Adds team recommendations on the current friendly manner to build
an application.
Change-Id: I7aff1788dc15c7159a319c926f14bc621924ce67
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
JIRA: ZEP-180
This line was missed when the task IRQ APIs were deprecated
by commit a83f895dd5.
Change-Id: I0135eebb2f7bd0991364fdaab8a0a1fd6981d50d
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Incorporates the brief discussion of device driver support into
the Device Drivers document, so that the driver material is all
in one place. (Also converts a few unprintable characters in the
latter document to spaces, since they appear to have been used
by accident.)
Removes the empty discussion of networking support, to avoid
duplicating stuff already covered in the Networking document.
Change-Id: Ia5b8a92ade72a0634ee142afb45928016442d7dd
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
No longer necessary since the host tools compile natively now.
Change-Id: Ibe6f66fa79498678bddc25f69f799555d181ea7f
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Relocates material that outlines the structure of a Zephyr application
so that it appears at the beginning of the "Application Development
Primer". (i.e. The primer now tells the reader the file structure of
an application, then explains how to create these files.)
Revises the description of the MDEF file to make it a bulleted item
(like the other file types are) and improve readability.
Change-Id: I9f003b8317257c927bea752da55cc434f957592c
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Relocates material that describes the most fundamental terms used
in Zephyr documentation so that it appears in the "Introducing Zephyr"
document. (i.e. Ensures that the terms are defined before they are
used in the "Getting Started Guide" that follows.)
Transforms the material into a definition list to make it easier
for readers to locate and understand the mateial. Revises the text
to give it a consistent look-and-feel.
Change-Id: I0187d99b1bdac37397a4c907d57bc1f24d7698e7
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Relocates the introductory material for Zephyr into a new document,
so that it can be more easily located by users. (Previously this
info couldn't be accessed from the list of documents on the left hand
side of a web page; instead, you had to click on the "Documentation"
tab at the top of the page, which is non-intuitive.)
Change-Id: I1e1f78162a314b958789fcef57fc864336007f3c
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Moved the DesignWare ARC EM Starter Kit information from
em_starterkit.rst to the Zephyr wiki.
Change-Id: I2d5343d7bf03c69f5c8365e955dbb86980b4c5d1
Signed-off-by: Evan Couzens <evanx.couzens@intel.com>
Moved board content from arduino_due.rst to the Arduino
Due Zephyr wiki article.
Change-Id: I438d674b43836beb45a0690d86327b9526c9eddf
Signed-off-by: Evan Couzens <evanx.couzens@intel.com>
Groups top-level documents so that related documents are adjacent.
Also re-orders things so that documents for newcomers appear before
documents on more advanced topics.
The rationale behind the resulting order is described below:
Getting Started Guide
- Enables a newcomer to access & try out Zephyr by running a sample
application using QEMU.
Supported Boards
- Enables a newcomer to try out Zephyr by running a sample application
using actual hardware.
- Also lets newcomers know which boards are currently supported.
Zephyr Kernel Primer
Device Drivers and Device Model
Subsystems
- Describes the various components of the Zephyr kernel.
- Lets a developer know what is available when they are *designing* code.
API Documentation
- Describes the various APIs of the Zephyr kernel.
- Lets a developer know what is available when they are *writing* code.
Application Development Primer
- Provides the info needed for a developer to create a new application
using Zephyr.
Contributing Code
- Tells a developer how to contribute code back to the Zephyr project.
- Advanced topic.
Porting Guides
- Provides guidelines for porting Zephyr to a new architecture.
- Advanced topic.
Build System User Guide
- Covers writing Kconfig options, and also contains reference guide.
- Advanced topic.
Change-Id: I8ecb4953c788e843028d1e8778be1ef1aee6c175
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Moved the QEMU x86 information from qemu_x86.rst
to the Zephyr wiki. Also corrected a typo in
qemu_cortex_m3.rst.
Change-Id: Ic7ac8a1ab59018f25466c9031ce465973d6bdd8f
Signed-off-by: Evan Couzens <evanx.couzens@intel.com>
Moved the QEMU_Cortex_M3 information from qemu_cortex_m3.rst
to the Zephyr wiki.
Change-Id: I4899c562844f8fc90096aea45b14a80f40791239
Signed-off-by: Evan Couzens <evanx.couzens@intel.com>
Moved the OLIMEXINO-STM32 information from the
olimexino_stm32.rst file to the Zephyr wiki.
Change-Id: I97aa1b400bd65bbe53bb58e635a789cb325c3795
Signed-off-by: Evan Couzens <evanx.couzens@intel.com>
Moved the nRF52-PCA10040 information from nrf52_pca10040.rst
to the Zephyr wiki.
Change-Id: I0069b9e720a39b515c8ca612343e3f3410f4a77a
Signed-off-by: Evan Couzens <evanx.couzens@intel.com>
Moved the Minnnowboard Max information from minnowboard.rst
to the Zephyr wiki.
Change-Id: I97c2090e3a76e2ab6a9ab1e5f338fb4c3ffb0715
Signed-off-by: Evan Couzens <evanx.couzens@intel.com>
Moved the Galileo Gen1 and Gen1 info from galileo.rst
to the Zephyr wiki.
Change-Id: I2210ab98429efb55be5ef3e47096842dfdbce16e
Signed-off-by: Evan Couzens <evanx.couzens@intel.com>
Signed-off-by: viggo.jf.intel.com <evanx.couzens@intel.com>
Moved the FRDM-K64F information from frdm_k64f.rst
to the Zephyr wiki.
Change-Id: Ibf5431d21bb82af1b9eebc7b693b88d774247369
Signed-off-by: Evan Couzens <evanx.couzens@intel.com>
Moved the arduino_101_ble.rst content to Zephyr wiki:
https://wiki.zephyrproject.org/view/Arduino_101#Blue
tooth_firmware_for_the_Arduino_101
Change-Id: I361f124967da277aba835f39294a36718cf990a8
Signed-off-by: Evan Couzens <evanx.couzens@intel.com>
The doc build needs not the HTML or Latex documentation generated by
doxygen, as sphinx takes only the XML. Disable them to use less space
and speed up the build.
Change-Id: I51974449262fc5b45c6c2b41aad54365cceac341
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
A workaround used to silence a warning in the doc generation process
which involved tagging a structure with a #define can now be solved
with a cleaner approach which is non-code-invasive.
Backup said change and update documentation on what to do when the
issue is found.
Change-Id: I1ef5224cd1b2df2e57c2ace438dba90ba3fc8528
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Fix the omission of having bullets for the enumeration of options, as
it makes the formatting look properly vs just different lines.
Change-Id: I701f705bc03ccc2082439c3ea3c1b5053b2aac0a
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Change-Id: I955bad3c560d8e0026d671dadf6004edb94559e4
Signed-off-by: Adrian Bradianu <adrian.bradianu@windriver.com>
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Moved the Quark D2000 CRB information from
quark_d2000_crb.rst to the Zephyr wiki.
Change-Id: I62b6970633570c6af2d8d946d5621b032ff10467
Signed-off-by: Evan Couzens <evanx.couzens@intel.com>
In preparation for more strict guidelines on documentation, provide a
trouble shooting guide with the most common and obscure issues found.
The CI system will point to this guide to help committers upon doc
failures.
Change-Id: I386baea75dad0c82b58b23926e0bd32de8a0b249
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Moved content from arduino_101.rst to Zephyr wiki article
Change-Id: I10d42e28f375bcb5c5c7266e7595b6dd7767ac8b
Signed-off-by: Evan Couzens <evanx.couzens@intel.com>
Fix with a workaround in unnamed unions / structs in bluetooth, i2c,
sensor and uart.
Current documentation parsers (sphinx under Doxygen) don't seem to
understand well unnamed structs / unions. They will not generate any
documentation for any documented members (see left side of
http://imgur.com/mcpBXWc).
A workaround is to make the parser think there is something like a
struct/union/enum name that is actually something with no effect to
the compiler.
Naming it with __unnamed_workaround__ ensures it is clear it is a
workaround while we wait for a final fix. It is #defined to be a NO-OP
to the compiler and rearrange the member documentation as *@param* so
we have some documentation that the non-worked around code fails to
document.
Anonymous structs/union that declare a variable are just given an
internal name.
Workarounds documented in the contribution guidelines.
Change-Id: I4d32cf444f3c5e7d2fb11581e4b41f80e93c9786
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
update index.rst to include 1.4.0 doc folder
Change-Id: I57b7ea470e4a5d2f8e93459f90421a87abf331ce
Signed-off-by: David Kinder <david.b.kinder@intel.com>
Add a document.title='xxx' via on-page javascript for the
.rst files generated by the genrest.py script
Jira: ZEP-459
Change-Id: I2b3dbb97758cfa232006a0cd98c4bd8394d8183e
Signed-off-by: David Kinder <david.b.kinder@intel.com>
Some function *typedefs* confuse the *Sphynx* / *breathe* parser [see
the patch for full details]. Implement a workaround (defining the name
with @typedef), add workaround documentation and file a bug with the
sphinx/breathe developers.
Change-Id: I7f3dba4a53d0cc73e12f02511a5f85526f357b5f
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Sphinx's parser gets all confused; add a workaround using @fn,
document the workaround in the contribution section; bug filed with
Sphinx for a permanent sollution.
Change-Id: I0200add092da27206b9d006bb13110c4cc37d0e4
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Kills warning:
error: Tag file `NO' does not exist or is not a file. Skipping it...
Change-Id: I1543b672f7f8eca406d2ab5493a1ad9a45ce7868
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
This is needed so the parser can find the functions that are being
documented in high level files as part of ports.
Change-Id: I6b7fe1c2ef28d74741966a18e8008a893975c969
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Otherwise the trees hide the forest and it is really difficult to see
what issues are introduced.
Change-Id: I2272f2caff8b99a15a0b2540787845e4541a36d3
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Makes no sense to integrate the whole file for just a few lines, so
defaulted to remove the inclusion and just copy the lines that are
interesting.
Change-Id: I84a2218063ca7368678402b1123da34efae14f27
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Setting CONFIG_ARC_INIT=n in prj.conf make it possible to use same
config for both QEMU and Arduino 101 targets.
Change-Id: Ie4f549d5721f2b87077fba8787f5b1e2a8f07680
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
These influence the existence of some struct members, so to ensure
that their documentation gets included we need to explicitly define
them.
Change-Id: I0b0d3deec5874f6f8dbfda51376f6a4456942353
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Per:
commit a83f895
Author: Andrew Boie <andrew.p.boie@intel.com>
Commit: Benjamin Walsh <benjamin.walsh@windriver.com>
microkernel: deprecate task IRQs
This mechanism does not add enough value to the kernel to be worth
maintaining it. Drivers that need deferred processing of interrupts
can simply define their own task and have the interrupt handler
release an event that the task waits on.
The API is marked as deprecated and it is removed from unit test
coverage as well as the documentation.
Change-Id: Ib87b91cb41e9b6d7fdf0dc62b240a531b6a8889f
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Change-Id: I0d891772b1fb4246ec9ee9f4764b2121333ae972
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Original link "fiber services" does not exist, so renamed to the one
at the head of "nanokernel_fibers.rst".
Change-Id: I39c89e5dbe9b8d0462eb2aa8d84db65b22625fdc
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Not sure which was the original link, but naming_conventions seems
like the sensible place where the document should be pointing to.
Change-Id: I12f8317578b33371765605786735c30aadb92b77
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Must use :c:type instead of :cpp:type.
Change-Id: I600c7a018e1b1492e967b05f44fec14afd87eccc
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
:c:option:`xyz` is non usable without a . c:option:: declaration, so moved
to *xyz`; likewise :option:`xyz` where no .. option:: xyz is declared.
Change-Id: I011ccf2aac244125dbe2d09d197e443bd4c12fe2
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
This file is only used there, it is short and keeping it away
introduces problems (warnings about .rst not being in any TOC entry,
:orphan: dangling if added, etc).
Change-Id: Iea33f22721856884aae9fc1dce46a2b90896286a
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Added sphynx comments required to link C code comments to rst
documentation, additionally a new rest page with the list of
current system log Kconfig options and an example.
Change-Id: I9d1370b5f0a2fbd858de83befb99f0f4c7024a13
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
JIRA: ZEP-153
Move to use :option:`CONFIG_XYZ` vs :option:`XYZ` to generate propert
links and avoid warnings about unexistant targets.
Change-Id: I4b46041f25e538462b123ccc8337f733033cc0e7
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Config options KERNEL_EVENT_{INTERRUPT, CONTEXT, SLEEP} don't exist
any more, removed.
Move to use :option:`CONFIG_XYZ` vs :option:`XYZ` to generate propert
links and avoid warnings about unexistant targets.
Change-Id: Ibafa155f474a05329a8cac7bff5c55800d9f31a4
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
This creates proper links and removes undefined link warnings.
Change-Id: Id8c4cc4279114cab05ed8ad3f7da24f7ce673e8d
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
This allows us to cross ref from code with :option:`CONFIG_XYZ`
generating a useful link and avoiding an 'undefined target` warning.
Hyperlink using :option: instead of :ref:.
Change-Id: I6cc0daec012dfcca504faa47d591885e69c8e521
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
When we are specifying some kind of option that we are not
documenting, we shall not use :option:`xx` as it will generate a
warning. Thus, use ``xx`` in its place (or *xx* in others) as needed.
Not all converted, as others make sense to move from xx to CONFIG_xx,
which will be handled separately.
Change-Id: I98d5e70da471184f99bb491b1fa1a3b7086019d2
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Pass -q to sphinx-build so it only prints what is wrong, not a huge
list of progress information that in most cases is not necessary.
Note that this can be overriden from the environment.
Change-Id: I8735e7ad9a2998734d4e9dda9b3e826ce07b5527
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- :option:`XYZ` can only be used if there is an .. option: XYZ
definititon somewhere; replaced with a more generic monospace
``XYZ``.
- Fixed broken link to 'Creating and Configuring an MDEF File for a
Microkernel Application'.
Change-Id: I2b1e862415035500c00dcce0a33d14bac4126044
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Four code snippets fail to be properly recognized by the code
highlighter; the makefile snippets seem to be because of the $
character (and I have found a way to escape it out). The C code, I
haven't been able to find out why.
Killed the warning by setting the code-block style to 'none' on all of
them. It is not the best sollution, but it beats a polluted build
process.
Change-Id: I8fa7d327354a93bacad40e25596c9dbaf9ea1e92
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Files had been changed without the offsets being updated, so it was
generating warnings.
Change-Id: I5c7756f396cf607470da1ce6c5807e5a343491d2
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Add missing '*/', rename <entity> to ENTITY and fix indentation so the
formatting engine recognizes the example code as C code.
Change-Id: Iff1b5c0cef5bb635ba1b39f507ff657e9ab4c338
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
To fix, insert the synchronous_calls.rst file inside drivers.rst; they
are both small enough. Plus, none was calling that link anyway.
Change-Id: Iba2027d143cb29497431cb47dfbcf0435087f1ae
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Warnings about duplicate label (_about_zephyr) crept up because of the
way the about_zephyr document was included in the index. This is a
short document, makes sense to have it as part of the index.rst; it
removes clutter from the directory as well as the warning.
Change-Id: Ifdc3a93fb4316be4aef685257d14749769443b41
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
A warning was generated for the TOC entry "About Zephyr", which was
missing; replaced with a link to said section (to reduce clutter in
the document).
Change-Id: I1f879bc21bad8ec857781208ad9e31079015292a
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
This removes warning about duplicate symbol (of _coding_style, due to
the inclusion) plus also a very short file which can be very well
inside conventions.rst.
Change-Id: I7b8467a0a845225a4fe4356f012f60ab0ea202aa
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
It was too short a file, it was causing duplicate link warnings
(_error_code_conventions, due to the inclusion, which wasn't being
used anyway).
This removes the littering of small files and removes warnings from
the documentation compile.
Change-Id: Ic6f225a63d875d77bd2e93b2712baabea2eb0141
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Files that are included directly into other files are not referenced
in TOC trees. Quiet warning by tagging them :orphan:
Change-Id: I3a975420ce366ca155e8c0158dcd0fb7c094a4a0
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Add a blank line in most places is the fix needed, to have the
formatting engine recognize it properly.
Change-Id: Iccaa0e51146b1e2c138e89ab1dd0067fc1409e4d
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Seem embedding a `code-block` in a `note` section is not working that
well.
Change-Id: I6a0ad0b5a17b2fc1cb9968a85dc794c53a1e27ac
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
The "IDT Security" section was removed since the IDT is now always
in a read-only region; dynamic IRQs have been deprecated and will
be removed from the kernel.
Change-Id: Idbb7ff987bbb4f777b524d87690485d34f372d43
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
D2000 is shipped with no ROM, advise on how to install one.
Change-Id: I848bb0b4fa2d6972cc6919d69a11e14dee0ce50c
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
The unicode characters for trade mark and register trademark,
although understood by the Atom editor, apparently don't work
here. :-(
Change-Id: Ifbdb25a015630fc90afb18aec6f07a8724fc37f7
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Improve this doc to use register trademark and trademark unicode
symbols.
Further, the make rules can benefit from also being passed the argument
ARCH=arc. I see that some zephyr tests use ARCH to select a prj.conf file.
Change-Id: I0650e5d5aba10aa984ebd0be21d0b381dd96dd56
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
The dependencies for the HCI firmware are now part of the latest
stable MyNewt release, so special editing of project.yml is no longer
needed.
Change-Id: Ia3658ab1da03e208cd5230e0cda4c96a4628e8f0
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If you pass arduino_101_factory, it expects a directory with that name,
but really the directory arduino_101 contains the factory config.
Change-Id: I12ce11c0e32a9d50998b52c2e2c16780b6ce00da
Signed-off-by: Geoff Gustafson <geoff@linux.intel.com>
Tinycrypt is maintained at github and thus should be treated as an
external library and hosted under ext/.
Change-Id: I4c4a3bcdacf01d4922919e5ea1f9dec21a19cd37
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Marketing is telling me to switch URLs for the EM Starter Kit
board story.
Change-Id: I342849d1085330eb9e5e88f08374bb5889695702
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Correct the indentation of numbered lists to
appear correctly once render.
Change-Id: Ie1b92a7c5d2517e4f36626858404458c3b461be9
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Generate kernel image in Intel Hex format when building for the nRF52.
Remove the additional step from the board doc file.
Change-Id: I619496f64037c2a0ac459ae05e549e01458e0f71
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Few lines in the doc were out of sync with the code base.
Jira: ZEP-312
Change-Id: Ic0d3508f0f903e43000e17b4a32c1280ae0978dc
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Board support for the ARC EM Starter Kit provides for a board
that can select one of two SOCs. The EM9D and EM11D commits
will be done separately to expidite review. Also submitted here
is doc/board/em_starterkit.rst to explain details about this
Zephyr board choice.
Change-Id: Icd9fac045c700ad8dcb95161fdd63c130f665778
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
By default, kernel event logger is using the system timer. But on
some platforms where the timer driver maintains the system timer
cycle accumulator in software, such as ones using the LOAPIC timer,
the system timer behavior leads to timestamp errors. For example,
the timer interrupt is logged with a wrong timestamp since the HW
timer value has been reset (periodic mode) but accumulated value not
updated yet (done later in the ISR).
This patch is adding the possibility to register a timer callback
function that will be used by the kernel event logger. For example,
on Quark SE, this allows using RTC or AON counter which accuracy is
sufficient and behavior more straight forward compared to system
timer.
Change-Id: I754c7557350ef29fc10701e62a35a5425e035f11
Signed-off-by: Fabrice Olivero <fabrice.olivero@intel.com>
Fix a few small (mainly rendering) issues with the arduino_101.rst
document:
- A few paragraphs had the wrong indentation
- A sub-list did not appear as such (serial port settings)
- Remove the 'Bibliography' section which appears empty
- Fix IO-3 and IO-5 pin names in note
Change-Id: I60ad839de1901167b6793254186836015502aaab
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Document the process of creating and flashing a MyNewt-based HCI
firmware for the Arduino 101.
Change-Id: Ieb3cf116363777b8cca20dbcc746e4757f47d2ed
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The Arduino 101 board in Zephyr now support the original bootloader
and thus supports flashing over DFU. Adapt documentation and remove
reference to alternate bootloader which has been causing issues
and does not support flashing of the bluetooth firmware.
Jira: ZEP-301
Change-Id: I0298d8938bb636319b213909594d8cb42417559a
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Added CONFIG_KERNEL_EVENT_PROFILER_DYNAMIC flag for enabling that
capability. When set, nothing will be logged by default
Change-Id: I03552483e5a6bfd9e2505eda56908f0d0ae98618
Signed-off-by: Fabrice Olivero <fabrice.olivero@intel.com>
OS tick period (usually 10 ms) is not sufficiently precise for task
execution analysis (like processing CPU load per context)
With that modification, the timestamp used by the kernel event logger
is 32-bit LSB of platform HW timer (for example Lakemont APIC timer
for Quark SE).
This timer period is very small and leads to timestamp wraparound
happening quite often (e.g. every 134s for Quark SE).
This wraparound must be considered when analyzing kernel event logger
data and care must be taken when tickless idle is enabled and sleep
duration can exceed maximum HW timer value.
Change-Id: Idc545da8f828a7357a69d83ff25c9afd09dab3c4
Signed-off-by: Fabrice Olivero <fabrice.olivero@intel.com>
Do not use a TOC, instead put all options in a table and use references.
Jira: ZEP-149
Change-Id: I23821759c64ce28241ee8260ad7cba235df72d86
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The fixed link was broken when development documentation started being
hosted at /doc instead of /doc/dev
Change-Id: I3621bf83beb030e7d80f60e1d148cd7311d25cdf
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
Edited and added minor markup for consistancy.
Edited some '/' to clarify 'and' 'or'.
Change-Id: I5aa84f278d65e79d12b634fcbef2a8b5070c8ebd
Signed-off-by: Gerardo Aceves <gerardo.aceves@intel.com>
Jira: ZEP-177
Changes the documentation for the toolchain path. Some windows environments
need the ISSM installation path to be written in windows format.
Change-Id: Ib4729eb668e0daa7f7f520f208def4be6b86c692
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
Move development instructions to a separate file to make way for a
more high-level description of the stack. Also add more high-level
text to the main Bluetooth file.
Change-Id: Ic14ef62e6f5f602797b61df8584860dfac575489
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Fix grammatical errors and try to make the language flow a bit better.
Change-Id: I76b9dd2c88c087a6e4ae49788388a1ec4d198496
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Documented the Power Management subsystem which includes the
power management hook interface, device power management,
device busy status interfac and other APIs. Also included
is a guide to writing Power Management applications.
This has 2 parts. One is the general description of the
infrastructure and the PMA writing guide which goes in the
'subsystem' area. Other is the API description that gets
automatically pulled in from the comments in the source files.
The API description goes into the section where all other
Zephyr APIs are put.
Change-Id: Id630209b23f931a8fcccb6f59428610298486743
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Now that Bluetooth is its own subsystem Networking shouldn't reference
it as a sub-section anymore.
Change-Id: Id134f9b9e63cfc6533e35e91c7bc6aedd6e8fdf8
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This helps avoid having the tree grow too deep.
Change-Id: Ic4055f30b6d6f2ab575b361062d7f44b84237ba5
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The index.rst file should reference variables only once.
Jira: ZEP-148
Change-Id: Ia5aad1d3ccd0f7c93fca94f1fa0ad88171eaf5c1
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Explanations and guidelines when porting Zephyr to a new processor
architecture or ABI.
Change-Id: Ibb3a26636dca6b248103e4744c333911c2af0e50
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
show different information based on the state of the current
documentation and link to development version and released
versions depending on where the user lands.
Change-Id: Ifa6263900222db483efa0388e2588dd97222ecb6
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Adds documentation file of oliemxino_stm32 to the
supported boards.
Change-Id: Ide6c7767be56d33e8c040a03df13337919a09750
Origin: Original
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
Added line for JIRA key in the commit message and a note about
the JIRA key.
Change-Id: I8b447d42a592a1ba88a1cc476fbb563365a4316f
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
contribution guide is now a top level document and other guides
are being moved to the wiki.
Change-Id: I1e207e18659f3aa98111cfaa1597478ff29eedef
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Adding documentation for building, flashing, and debugging the Quark
D2000 series CRB.
Change-Id: I3d61d5c8b88b5f74da76262d4fcda823c6f7b9b3
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
- Consolidates the links to the sections in a single table of contents.
- Adds the documentation's version number.
- Adds a link to the project's Wiki.
Change-Id: I762d30ce8cbf518df8a28e428e94a2f9a3c7085d
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
The communication section is being removed.
The content will be available elswhere.
Change-Id: Idca52a7d3bc2f0607f108d639e2edf931bf99ffd
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
The documentation collaboration section is being removed.
It will be included elsewhere.
Change-Id: Ia669a48df37996572c95e71827d69f4faba5a232
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This adds the DEVICE_AND_API_INIT() macro to take in a parameter
to assign to device->driver_api. This eliminates the need to
assign to driver_api during runtime device initialization.
This provides an alternative way to declare devices. This should
save a few bytes in ROM for those devices that will never fail
initialization (in other words, never need to manipulate
driver_api pointer at all).
Also clean up the documentation a bit to remove duplicated
block of information.
Change-Id: I6abed1abe75db2e8babfcf1ecf590491132a5543
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
We have not found any use-cases for dynamic IRQs where a static
IRQ did not also suffice. Deprecate so that we can eventually
remove from Zephyr and nontrivially decrease the complexity of
the kernel.
Change-Id: I509655371773aeaca7d01134dd850eb4cd95f387
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This mechanism does not add enough value to the kernel to be worth
maintaining it. Drivers that need deferred processing of interrupts
can simply define their own task and have the interrupt handler
release an event that the task waits on.
The API is marked as deprecated and it is removed from unit test
coverage as well as the documentation.
Change-Id: Ib87b91cb41e9b6d7fdf0dc62b240a531b6a8889f
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Changed conf.py to use env var in the version of documentation.
CI can take advantage of this to name documentation using
tag version from git.
Change-Id: If59f800ccd37648a9c0dab6c948b13166a7f4aed
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
Edited the microkernel API sections to get the proper linakage.
Change-Id: I1bc95c6e21ed996c4c5d72188c5f018038e3e958
Signed-off-by: Gerardo Aceves <gerardo.aceves@intel.com>
- Put everything in one page and simplify workflow.
- Fix indent and layout
Change-Id: Ifd9d11531c9b906324cf87cf401cbce416cc01a4
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Integrate the notes into the actual steps, notes are usually understood
as optional and disturb the actual flow.
Change-Id: If3168581ca130bd506bc44c353acc082dfa003fd
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Merge documents and improve structure. Avoid too many jumps to get
to the information and avoid single paragraph pages.
Change-Id: Ifed4fa90d1105022bfe87e6d078845938e13bd3a
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add sensors and networking into the new section and seperate
those from the kernel documentation.
Change-Id: I585845c3ba09173ced7caa0b7fbc1f1a81a26f96
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Put all device drivers and device model documentation into one
section.
Change-Id: Iba6a50796b02b7f9234c23dca706be62fd7b4259
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Create a new top-level section in the primer that includes sensor
drivers and the synchronous call API.
Change-Id: I0c1b734ec56abc20724ff682caba618ab0965230
Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
Zephyr now uses codes from errno.h as the standard returning code for
all APIs. Since some code usages can be confusing or ambiguous, this
patch documents the conventions we are using to keep the returning code
usage consistent.
The document is based on the current mapping we have in device.h.
Change-Id: Ie6f429602592be8572631e34ae65435530a05b9f
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Fix for imperative API descriptions, note needs work (see comment).
Change-Id: I300ff03ee5c6b6cb50cf2b1614f22940a0b10213
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
Minor edits to clarify wording, readability of rendered documentation
Change-Id: I4144cfb8e191234d5fb3b6aa0fc3324b85cd286a
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
To enhance readability, add bold, lists in sentence form (as per
the style guide) and other parallel content from microkernels section.
Change-Id: Ida989ec7187bf7a035803644b5cc710571b66e3e
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
Add :dfn: and other .rst kinds of syntax and parallel format to
other documents in the microkernel sections. Corrected a few
typos.
Change-Id: I8e0d36a2f9091f551674fdf0518bb66453ada49b
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
Corrected an "is is" and other minor punctuation + grammatical edits.
Change-Id: I26f51809215a8ac77a20bc9d424e6a806e29ee50
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
Added Linux Foundation ID to the example scp command to install a
precommit hook.
Change-Id: I03c6d2e89cb76816db01fa11d826464d33a058d1
Signed-off-by: Pawel Wodnicki <pawel.wodnicki@live.com>
Removes the specific version number of SDK installation example commands.
Specific version numbers becomes frequently outdated.
Change-Id: I6fc368b30a5fe7899f6a2fc979f469e2b3cd9f72
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
Adds missing '$' to export command, env variable PYTHON_PATH was not being
expanded when using such command.
typo:
Change-Id: Iad7ee60fbe2699cceb6a6ff6cd64e3bc4ebd2f58
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
This will ensure uniformity in the future, but will require what code is
currently aligned on 4-char tabs to be reformated (basically the kernel
and arch code, and some other) to fit in 80 columns with 8-char tabs.
However, it will be more natural to developers used to 8-char tabs,
i.e. people used to work on Linux and other open source projects, which
is our audience, and will lower the barrier of entry.
Change-Id: I626b20e62ba1a5dddd030a27185f51237e5e98b5
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Making all the files in this section consistent with :dfn: in the intro
paragraph, API headings, present-tense verbs in APIs, parallel wording.
Change-Id: I5259c443076b1ac6602352dab42d35d5aca6e5b5
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
Making all the files in this section consistent with :dfn: in
the intro paragraph, API headings, present-tense verbs in APIs.
Clarified paragraphs on priorty-bazed waiting and priority
inheritance.
Change-Id: I26cc49926bc49c9c68300b6249aeb52c1be33625
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
Added ReST syntax dfns, added bold and lists. Reworded a couple sentences
that could be stated more clearly.
Change-Id: I997b54e1dcbc44d683919008770dd90857a96e47
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
Updated the Concepts subsection with a clearer topic outline, added bold
and dfn; added heading to Example: Defining Private Event... ; fixed some muddy
language in paragraph about event handler functions.
Change-Id: I040ae8ee2be7fd4742f782e5f505a9cdcece7b62
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
A couple paragraphs contain ambiguous verbs that are unclear.
(For example: Line 23. Does the kernel perform a busy-wait,
or does it merely permit a task or fiber to perform a busy-wait?)
Based on original, I guess the latter and attempted to correct this
in the docs.
Also fixed spelling error.
Change-Id: I0699835a9681c1a4873575fbf9a69bc6d854bee4
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
To have consistency throughout the docs, APIs should all be in
imperative verb. Updating this, and adding other consistent structure
to match the rest of microkernel section docs.
Change-Id: Ic2285496895ae9edfcc523f8fc2f99bcb935227f
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
The patch modifies the file doc/conf.py to fix the warnings:
1) the config value 'html_add_permalinks' has type `bool',
defaults to `str.'
2) html_static_path entry '/media/projects/zephyr/doc/_static'
does not exist
Change-Id: I01e74b5db85311c514ef437e75b8f378ce80125f
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
Fixed some indentation errors in scripts/genrest/kconfiglib.py
which cause generation of html format documentation to fail
Change-Id: I228f528d49722549f6034a572049db4b9d735615
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
There were inconsistencies and outdated information in the Intel
Galileo board instructions. They were also unnecessarily complex.
Corrected inconsistent instructions for copying the stripped ELF file
to the boot device.
Updated description of what output to expect from Galileo firmware
during boot.
Added links to board configuration instructions from Intel website.
Added instructions for configuring PuTTY keyboard mode.
Removed redundant instructions in the sections for boot device
preparation and booting the board.
Simplified the UEFI boot instructions.
Change-Id: Ie1a636a7f88a89f23945eb742536446c6a5829c1
Signed-off-by: Michael LeMay <michael.lemay@intel.com>
I built GRUB on Ubuntu v.15.10, and I found that some of the
dependencies listed in the Galileo documentation do not actually need
to be listed on the apt-get install command line. Some are simply
unnecessary, and others are already listed as dependencies by other
packages in the list.
Change-Id: If6ae0c3abe54a18839e75299a3e9cf006c745d0c
Signed-off-by: Michael LeMay <michael.lemay@intel.com>
Updated note text based on code review.
Change-Id: I0f32c5821b37062d23ddbf2252ae8b3d4c8739b5
Signed-off-by: Jennifer Marandola <jennifer.marandola@windriver.com>
The Arduino Due requires a specific version of the bossa tool
to facilite the flashing process. The working one is on a branch
in the bossa github project. So make it clear that we need that
particular branch of bossa to work.
Change-Id: Ic7290dd4d7812f1cad4d87ad282dc90ea9b29c01
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
General grammar edits: removed an "is is", added clarification, and
removed Latin abbreviation as per style guide reqs.
Change-Id: Ie9365dea2cdf27c107675487d4bf392711f4acb2
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
Much of this doc is comparable to memory_maps, so edits make the overall
language and structure consistent among files. Added heading syntax to
APIs, make imperative verbs on API notes, as discussed in code reviews and
on previous edits.
Change-Id: I8e14b44007acdf5422d75810dde78aef1a9c653a
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
Minor language corrections, example heading, bullet and bold added
to be consistent with the other microkernel reference docs.
Change-Id: I371cffcb60d09308c1b26701830dbbc0ddeb745d
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
API notes needed a bit of clarification, fixed typo of file name.
Change-Id: I57438165fb2fc3da796fcde19d58a46862ffbbd9
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
Fixed indentation and align text. Also remove to many levels of bullets
and streamline text.
Change-Id: I734f96666277e39b5aafc99ace754d129ecdd0be
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Corrected typos and added headings to API section to
enhance readability.
Change-Id: I5a43edfdd6a8ac7735d8f00823058f6a2661439f
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
Corrected a few typos and misspellings. Corrected grammar to add clarity to the
section on task groups. Added cleaner headings to APIs to enhance readability.
Change-Id: I6ff4d447775db67dc7008aa30bd2bbb4ab6c32de
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
The path to the sample applications is a mis-match of previous and the
current values. Correcting it to represent the new value.
Change-Id: I54ffe823335b95f1076b1346d149b359b4f2e7bd
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Currently we have several sections that require the use of sudo for
functionality, but that is a workaround to the need for libusb to
control the FlySwatter hardware. This can be solved by adding in
proper udev rules.
Change-Id: I03f6464cb96a9924c902b897c36df925eb07d058
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
The info already exists elsewhere in the documentation / GSG.
Change-Id: I1176b496dfd28179ce7771af4d3ac659690c7a7e
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
This file was updated and included in the nanokernel
primer information. It showcases the simple use of
nanokernel semaphores, timers and fibers.
Change-Id: Iaaa961eccf4f0df5d4c009d053b9d28e96c8d87d
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Now that we've gone open source, there no longer needs to be a user id.
Change-Id: Ib3bc8ca1591d23e89a7d9d33946d56438c4f9846
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
The current documentation seems to gloss over the fact that powering on
the device before any JTAG operation is necessary.
Change-Id: Id7a46b611ddba97fa72e0a3a33ddc189b1e4a7c4
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Pins start at 1, not 0. Including JTAG pins.
Change-Id: I2e058c114bd1a4da25d4964e418a942d3c41b08c
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
The wget command is broken in the documentation. By using a \
to continue the command on another line, unfortunately line does not
render a newline character after it. As such, a copy and paste
fails miserably. Removing the \ allows a copy and paste operation.
Change-Id: I95c09dbe2dbcd51dedefcedc285e6ed38419960f
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Fix incorrect path for ssh key. It is .ssh, not .id.
Change-Id: I84f054f9ba880e31fcc89cf10da0fb8522dfbae0
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
The file can be used to define variables used by the SDK to avoid
having to define them everytime a session is started.
The old file names ~/zephyr-env_install.bash will still work but
it will warn about the file being renamed. We do not want to break
users who have ~/zephyr-env_install.bash in their home and depend on
it.
Change-Id: I04fcaa76854bda3dcfc1cabe75e00e95c511b10d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Table updated with examples column to eliminate Latin prefixes (e.g.) and
to enhance readability.
W/S fixed
Change-Id: Ia92e2d5454e816595e054cb44caa56364f9dc1b3
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
Breaking out the documentation on setting up a Linux Foundation account to
it's own section. This isn't needed for the getting started process, and is
only needed if someone decides to start contributing code.
Change-Id: I112b65a53b167927d2617aef7364c13f30f74c33
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
The current doc structure requires the creation of a Linux Foundation
account, which is not really a valid open source usage model. In fact,
it isn't even required to download anything as anonymous git clone works.
Content on creating a Linux Foundation ID will be moved to the
collaboration section in another commit.
Change-Id: I50253d7b3da85b64986d62f2e5bee25da3eb3987
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
This adds Implementation Conformance Statement (ICS) for L2CAP layer
with currently supported features.
Change-Id: Ie15d2936877edb674e20283b12a50487df5cdc02
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Align code examples and other parts of the document.
Change-Id: I1f6eb9d5d22991f54e367ed248abfe0d49622cc5
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The build steps as they are written imply that you will always need to
source the zephyr-env.sh file before flashing. This is not the case.
Change-Id: I2cffd5ee4b190dee8304f1843727926c7467f5ed
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Correcting the steps for running the loading of the ROM image.
Change-Id: Icdcfe1c5ffb28ba09b5d12ba0cf39ac25d3d166f
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Edit public API details for clarity, grammar, punctuation found
on file event_logger.h
Includes the event logger information in the ReST documentation.
Modifies doxygen.config to include the event logger.
Made consistent use of @retval to document return values.
Used imperative verbs for all @brief descriptions.
Change-Id: I88b8672a527138e2b4f7df4b4b0495a0d871cad3
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Includes the I/O drivers' interfaces in the ReST documentation.
Change-Id: I9ef70c4b0561c102b5c9425b4e41b5c813bf51b6
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Remove table which had redundant information and created a simple TOC
with boards. This will allow easy expansion of the list over time.
Change-Id: Ic94063cc99ddcb3d2140a4beef1067a9766d60a3
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Many of the UART interface functions are hidden behind ifdefs,
set those to 'y' when building documentation.
Change-Id: I1371e64b6fe4c269ce41c2c54e0f013d8088dbcf
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Updates Set Up steps from previous 01.org Gerrit to new Linux Foundation one.
Change-Id: Iab98864b405ff6dc4ea20d687fae77bd59284678
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
... and adds a note about terminal and flashing.
Change-Id: I9b3fe9a8e9993ee68612d177aa4163fcf15e912d
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Updates Set Up steps from previous 01.org Gerrit to new Linux Foundation one.
Change-Id: Iab98864b405ff6dc4ea20d687fae77bd59284678
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
Updated all the links and references for gerrit to the new gerrit
in LF. Also updated the screenshots to show the new gerrit and
project name.
Change-Id: If56b230379fad4de58032f9d729e6a94f27389ed
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Search engines recommend having only one heading on level 1.
Modified the headings in the documentation index file to
follow the recommendation and help ensure that search engines
place Zephyr higher on their results lists.
Change-Id: I5590138f88721d1f2cdcbb49ad2aaad1d2dcd466
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Updates files that were previously referencing the no longer in use
01.org infrastructure, now it we refer Linux Foundation name and have
updated links.
Change-Id: I9d03d7c23f855390f74219dbf1617fde1d58b33b
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
Removed a repeated heading and set the ther headings
with the correct level.
Change-Id: Ief8b2f9a7f88d0b6c2456d6ae448e86bb0b8d050
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Changed the link to the ReST documentation to a external link for reusability.
Change-Id: Ia575717c0fb92672828bb11854c9a8a1268af464
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Removes the Sphinx specific ReST Markup from th README.rst file.
This allows basic ReST converters to render the README without
markup showing raw.
Change-Id: I9f31afb953802119939d177524c0d283414c3a48
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Adding documentation on best practices for a commit message.
Change-Id: I354fc13f641bc93c8fd82aca6310d488ffc30f24
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
gerrit_practices.rst has style and formatting issues. Bringing them back
in line with the recommended practices of the project.
Change-Id: If76406e046ab376cea3e14c0e490e38587b34e6d
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Supported platforms section (platforms.rst) renamed to "boards.rst"
and broke into two tables instead of one (x86 arch and ARM arch).
Developer feedback was that navigating for board config options
by board architectures should be made easier.
Also updated index w/TOC to make supported board details
easier to find.
Change-Id: Ic014a720fd33ee685bde5809dc5b9e0622f5e989
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
Fixing the flash script so that we only have one for the process of writing
out the ROM and the OS images.
Change-Id: I6fc8bd8eee553a17c0036da3ce5b89510f3b57d8
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Adding in an image for locating the JTAG connector on the Arduino 101 board,
and a visual pointer towards the JTAG silkscreen dot.
Added figures for the JTAG connector.
Change-Id: I57ed5608bf2f3ded325965ec77142e3376f386ed
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Adding in a section for attaching a serial cable, and links for two that we
have found that work for us. Adding in links to both serial cables.
Added figures of the pins with appropriate callouts.
Change-Id: Ibae64811f1c32f6a8e82be17abbc91df6c53219a
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Fixing a few notes that are not being properly displayed.
Change-Id: I60f8a8615ee93ba391a99a819aa1761e6713e51b
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Restructured the API documentation and moved it from the Reference
section to the Developer guides section.
Added a note about the search function to help users find the API they
are looking for faster.
Splitted the API docs into two files one for nanokernel and another for
the microkernel APIs.
Added table of contents for each of the API sections with a back link on
the headings to take the users back to the top of the page. Making
navigation easier and more user friendly.
Change-Id: I80f415a60ea9c7df22276b464013e906e1efa511
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Edits based upon the first version of feedback from the User Trial
sessions.
Change-Id: Ie339eaebab4a43a822e419cf988d9b9893faa922
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Restructured the guide to follow a basic three step process: Set up, develop,
build. All information that is independent of the OS selection was taken out of
of the OS related documents and placed in the general set up sections.
A new section, Developing Zephyr Applications, was added with links to all the
development relevant section of the documentation.
The content in local_development.rst was split between the setting_up.rst,
installation_linux.rst and installation_mac.rst files as appropriate.
This new structure provides a much better flow for developers beginning their
Zephyr develpment.
Applied all of Inaky's suggestions in the refactored content.
Minor markup fixes and language edits were also perfomed during the refactoring.
Fixed a cross-reference that was broken during the refactor.
Applied all the feedback from the first trial run.
Applied the feedback provided by David Kinder from TCS.
Change-Id: I3368a3a41ec9ad02cc4e7b37fe71c65abd8a7df9
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
It's not a function and requires all its arguments to be build-time
constants. Make this more obvious to the end user to ease confusion.
Change-Id: I64107cf4d9db9f0e853026ce78e477060570fe6f
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Rename them to DEVICE_NAME_GET and DEVICE_GET to fit in the 'device'
namespace.
Change-Id: I407a7f284ed4d1c071961b46615eea859c2e825f
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Update the name of the firmware in the board documentation.
Proper name is "Firmware FRDM K64F" based on their website doc.
Change-Id: I75be2a676a9f2dcb4806ffbb39483c1ad91dae76
Signed-off-by: Javier B Perez Hernandez <javier.b.perez.hernandez@linux.intel.com>
Rename them to device_sync_ to fit in the device_ namespace.
Change-Id: I1088dda958584ed90b97137298050fee44c20ee4
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Adds documentation for the Arduino 101 on how to
connect up the debugger, flash, and build for the platform.
Change-Id: I0c7f119eb892ad5857de73dca94bc284bd0b4279
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
We can save a great deal of RAM this way, it only needs to be
in RAM if dynamic interrupts are in use.
At some point this config option broke, probably when static
interrupts were introduced into the system.
To induce build (instead of runtime) errors when irq_connect_dynamic()
is used without putting the table in RAM, the dynamic interrupt
functions are now conditionally compiled.
Change-Id: I4860508746fd375d189390163876c59b6c544c9a
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Updating the SDK version to 0.7.1 and the download link for it.
Change-Id: I63c4d57fdc96f60426af8610c7f9ac69e79fe69c
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
This option misunderstands how XIP works. The IDT is ALWAYS in ROM,
the question is whether crt0 will copy it into RAM or not. You can't
save ROM space in this way.
Change-Id: I58025e3d71ead35730d0a5026213299b4fcb5eb9
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is being removed for a few reasons:
- AFAICT this is the only API in Zephyr that follows an allocate/free
model.
- There are no public APIs in the interrupt subsystem for releasing
or reconfiguring an interrupt. This code was relying on arch-specific
private APIs. If we really want to keep this capability we should
make these APIs public and consistent across arches.
- The use-case for this API is not clear, as Zephyr is not intended
for hot-pluggable peripherals. Built-in hardware tends to need its
interrupt for its entire life cycle.
- The current implementation of dynamic interrupts on x86 does not
support freeing a dynamic IRQ that was reserved with
irq_connect_dynamic(), causing this code not to work. To add this
would require reimplementing _get_dynamic_stub() to use a bitfield
or set of bitfields to track unused stubs rather than the simple
counter it uses now.
Change-Id: I7a03c134fb3498b91a1816318a88b293e26b846c
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This patch updates SM PICS to PTS 6.4 version.
Change-Id: I6944698ea4f91d94f69a6968a123e30b106f8164
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This patch updates GATT PICS to PTS 6.4 version.
Change-Id: I9e1416c1295c273a55a715c7207791e69b36919b
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This patch updates GAP PICS to PTS 6.4 version.
Change-Id: I3a132ffbb1db0da1b0b882a24ef4adbf2b1a77cf
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This patch adds document with current supported PICS for PTS 6.3.
Change-Id: I4f8686aeb00ac95d80159d959547cc1fdac072af
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
The interrupt API has been redesigned:
- irq_connect() for dynamic interrupts renamed to irq_connect_dynamic().
It will be used in situations where the new static irq_connect()
won't work, i.e. the value of arguments can't be computed at build time
- a new API for static interrupts replaces irq_connect(). it is used
exactly the same way as its dynamic counterpart. The old static irq
macros will be removed
- Separate stub assembly files are no longer needed as the stubs are now
generated inline with irq_connect()
ReST documentation updated for the changed API. Some detail about the
IDT in ROM added, and an oblique reference to the internal-only
_irq_handler_set() API removed; we don't talk about internal APIs in
the official documentation.
Change-Id: I280519993da0e0fe671eb537a876f67de33d3cd4
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Changed the README.rst to reflect the updates done on the API
documentation.
Change-Id: I591ddb7e618afedf9fd77eb322255aa1ee94c5a0
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Simplifies the nanokernel timer API so that the timeout parameter must be
specified when invoking nano_isr_timer_test(), nano_fiber_timer_test(),
nano_task_timer_test() and nano_timer_test().
This obsoletes the following APIs:
nano_fiber_timer_wait()
nano_task_timer_wait()
nano_timer_wait()
Note that even the though the new API requires that the timeout parameter
be specified, there are currentl only two acceptable values:
TICKS_NONE and TICKS_UNLIMITED
Theoretically, the current implementation would allow one to supply a
finite positive value for the timeout and the system would wait up to
that many ticks for the timer to expire. However, it is thought that
that unnecessarily complicates the nanokernel timer model and so it is
left as an unsupported option. Should that change, then that feature
could be enabled by updating the documentation.
Change-Id: I8835c5342ab5025d6f70fdfbed54a50add7568d7
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the nanokernel stack API so that the timeout parameter must be
specified when invoking nano_isr_stack_pop(), nano_fiber_stack_pop(),
nano_task_stack_pop() and nano_stack_pop().
This obsoletes the following APIs:
nano_fiber_stack_pop_wait()
nano_task_stack_pop_wait()
nano_stack_pop_wait()
Note that even though the new API requires that the timeout parameter
be specified, there are currently only two acceptable values:
TICKS_NONE and TICKS_UNLIMITED
This nanokernel option does not support CONFIG_NANO_TIMEOUTS.
Change-Id: Ic7f16ee30c3534115ceffa19ef8591ecc5a79080
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the nanokernel LIFO API so that the timeout parameter must be
specified when invoking nano_isr_lifo_get(), nano_fiber_lifo_get(),
nano_task_lifo_get() and nano_lifo_get().
This obsoletes the following APIs:
nano_fiber_lifo_get_wait()
nano_fiber_lifo_get_wait_timeout()
nano_task_lifo_get_wait()
nano_task_lifo_get_wait_timeout()
nano_lifo_get_wait()
nano_lifo_get_wait_timeout()
Change-Id: Ie9f93e46da42ea33c32544c02ab1d70b893cc198
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the nanokernel semaphore API so that the timeout parameter must be
specified when invoking nano_isr_sem_take(), nano_fiber_sem_take(),
nano_task_sem_take() and nano_sem_take().
This obsoletes the following APIs:
nano_fiber_sem_take_wait()
nano_fiber_sem_take_wait_timeout()
nano_task_sem_take_wait()
nano_task_sem_take_wait_timeout()
nano_sem_take_wait()
nano_sem_take_wait_timeout()
Change-Id: If7a4bce1bd8ec8d6410d04f3c16ff1922ff0910e
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the nanokernel FIFO API so that the timeout parameter must be
specified when invoking nano_isr_fifo_get(), nano_fiber_fifo_get(),
nano_task_fifo_get() and nano_fifo_get().
This obsoletes the following APIs:
nano_fiber_fifo_get_wait()
nano_fiber_fifo_get_wait_timeout()
nano_task_fifo_get_wait()
nano_task_fifo_get_wait_timeout()
nano_fifo_get_wait()
nano_fifo_get_wait_timeout()
Change-Id: Icbd2909292f1ced0bad8a70a075478536a141ef2
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Shorten the name and remove the vendor prefix. No need to add
vendor to board names.
Change-Id: I68d441121c4034276706da63d7e5420ddf317149
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change the terminology in the documentation and use board instead
of platform where applicable.
Change-Id: I812598e1948ee7df8739e5cc9029278e9e849c7f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change terminology and use SoC instead of platform. An SoC provides
features and default configurations available with an SoC. A board
implements the SoC and adds more features and IP block specific to the
board to extend the SoC functionality such as sensors and debugging
features.
Change-Id: I15e8d78a6d4ecd5cfb3bc25ced9ba77e5ea1122f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use a real board name that can run this kernel instead of a generic
name. Basic functionality exits on this board with Zephyr.
Setup of the board is mostly similar to what we have in galileo (EFI
based)
Change-Id: Ic8554f26dcac0dbbbb6d35d863482f6207dc63c5
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This patch adds document with current supported PICS for PTS 6.3.
Change-Id: Ib87d9432087225612b01d849eced6ad5c2064f0b
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds document with current supported PICS for PTS 6.3.
Change-Id: I1eb62d500fb8b1bb9ec9162f9b0196858fe22b0a
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Changes the FIFO API so that the timeout parameter must be specified
when invoking task_fifo_get() thereby making the following APIs obsolete:
task_fifo_get_wait()
task_fifo_get_wait_timeout()
_task_fifo_get()
Change-Id: Iac626d9d6d4836033e06ffd5a2ca415ab2630b1a
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the FIFO API so that the timeout parameter must be specified
when invoking task_fifo_put() thereby making the following APIs obsolete:
task_fifo_put_wait()
task_fifo_put_wait_timeout()
_task_fifo_put()
Change-Id: Ifbbfb7018fd9a71551ccba648fda6d2d59d589a6
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the mutex API so that the timeout parameter must be specified
when invoking task_mutex_lock() thereby obsoleting the following APIs:
task_mutex_lock_wait()
task_mutex_lock_wait_timeout()
_task_mutex_lock()
Change-Id: I15d4bddbdc2707b3cbdab672498170da1c47b8db
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the mem_pool API so that the timeout parameter must be specified
when invoking task_mem_pool_alloc() thereby obsoleting the following APIs:
task_mem_pool_alloc_wait()
task_mem_pool_alloc_wait_alloc()
_task_mem_pool_alloc()
Change-Id: Ifa88f13bca98ca3c7d0e1a3b64b40a00068619e0
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the mem_map API so that the timeout parameter must be specified
when invoking task_mem_map_alloc() thereby obsoleting the following APIs:
task_mem_map_alloc_wait()
task_mem_map_alloc_wait_alloc()
_task_mem_map_alloc()
Change-Id: I8905d07fa4b8c3729ca144e8f09e7ad0c7bf0f43
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the semaphore API so that the timeout parameter must be specified
when invoking task_sem_group_take() thereby obsoleting the following APIs:
task_sem_group_take_wait()
task_sem_group_take_wait_timeout()
_task_sem_group_take()
Change-Id: I64e3f4c9f1e74a86b49d4a0e55b82ecee7733220
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the semaphore API so that the timeout parameter must be specified
when invoking task_sem_take() thereby obsoleting the following APIs:
task_sem_take_wait()
task_sem_take_wait_timeout()
_task_sem_take()
Change-Id: I746d5c966a3b81ffe014333af51aa10ea8a63263
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the pipe API so that the timeout parameter must be specified
when invoking task_pipe_get() thereby obsoleting the following APIs:
task_pipe_get_wait()
task_pipe_get_wait_timeout()
_task_pipe_get()
Change-Id: If249e57d086fef15fdc1616965f53b310ac9cf9d
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the pipe API so that the timeout parameter must be specified
when invoking task_pipe_put() thereby obsoletingg the following APIs:
task_pipe_put_wait()
task_pipe_put_wait_timeout()
_task_pipe_put()
Change-Id: Ie5693716828e9d8681434c0d130792279ab97acc
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the mailbox API so that the timeout parameter must be specified
when invoking task_mbox_data_block_get() thereby obsoleting the
following APIs:
task_mbox_data_block_get_wait()
task_mbox_data_block_get_wait_timeout()
_task_mbox_data_block_get()
Change-Id: I284be505e6de792ba5483611d1299063162550e1
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the event AIP so that the timeout parameter must be specified
when invoking task_event_recv() thereby making the following APIs obsolete:
task_event_recv()
task_event_recv_wait()
task_event_recv_wait_timeout()
_task_event_recv()
Change-Id: I165a8efbdedb431fee0c20e9ad1f1942c04124c0
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the task IRQ API so that not only does task_irq_test() become
task_irq_wait(), but that the timeout parameter must also be specified.
Use of task_irq_wait() obsoletes the following APIs:
task_irq_test()
task_irq_test_wait()
task_irq_test_wait_timeout()
_task_irq_test()
Change-Id: Ie4d15f29941429249e9fbb258d29ec2b3ae73a93
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the mailbox API so that the timeout parameter must be specified
when invoking task_mbox_get() thereby obsoleting the following APIs:
task_mbox_get_wait()
task_mbox_get_wait_timeout()
_task_mbox_get()
Change-Id: Ie028223ec342666e61d3d69750aec37dbe2b493e
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the mailbox API so that the timeout parameter must be specified
when invoking task_mbox_put() thereby obsoleting the following APIs:
task_mbox_put_wait()
task_mbox_put_wait_timeout()
_task_mbox_put()
Change-Id: I174857bdf32fe7e59b79838185666cd557312814
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
PROJECTINCLUDE is not required in app makefiles.
Change-Id: I3751b7c51c453dfe47d207bb11d171138668c4e7
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Completely overhauls Kernel Primer section on mailboxes to fill in
a host of omissions, correct errors, and improve readability.
Change-Id: I7f27230f59a593f6b7f44f399363ba423156b43e
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
To have a clear split between LE & BR/EDR rename these APIs with the
appropriate prefixes.
Change-Id: I983df2b5880947d96f0ad289d12f3383f44894be
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Introduce the device_sync_call_t object type and its API.
This object type allows one thread to perform synchronous calls into a
driver. Only one thread can do such calls per instance of the
device_sync_call_t object since it makes a global record of what type of
thread is waiting on it.
Based on an idea from Dmitriy Korovkin and Peter Mitsis, moving their
proposal to a more generic API provides the solution for all device
drivers that exposes synchronous API in an interrupt based
implementation.
Change-Id: I793fac76645396bf4eb6be38b5a130ac6bde8f73
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Removes the 'priority' parameter from the IRQ_CONFIG macro.
This parameter was not used anymore in any architecture.
The priority is handled in the IRQ_CONNECT macro.
The documentation is updated as well.
Change-Id: I24a293c5e41bd729d5e759113e0c4a8a6a61e0dd
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Setting up new platforms to handle emulation, and make them the only
ones able to run on QEMU from the Makefile "qemu" target to avoid
confusion with other platforms. We have now platform qemu_x86 and
platform qemu_cortex_m3, also modification to the sanity checks to have
qemu support only on those platforms
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Change-Id: I9291918a1d58fea4f37750ada78234628f9a5d98
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The calls have been renamed and some drivers and documentation
are still using the old function name.
Change-Id: Ib7505fca6aadd68e3ea3a22bb445914c3eb6ed7f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Removes the following deprecated routines:
nano_cycle_get_32()
task_cycle_get_32()
fiber_cycle_get_32()
isr_cycle_get_32()
Those routines have all been replaced by sys_cycle_get_32().
Change-Id: I8709952633bb87c8963e88caffe1036fb9add527
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Replaces calls to nano_cycle_get_32() and task_cycle_get_32()
with sys_cycle_get_32() as that is the preferred API to use.
Change-Id: I0ad1c50083c4cfdd9a26c2f20ba24e065410d90d
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Renames _sys_clock_cycle_get() (provided by the timer driver)
to sys_cycle_get_32(). It is the preferred method to read the
hardware clock.
Change-Id: Ifea5213d8c04a8bf7b9114b048c5db0ccee61549
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Updates the 'genrest' documentation tool to fix the following types of
warnings and errors:
WARNING: Field list ends without a blank line; unexpected unindent.
WARNING: Block quote ends without a blank line; unexpected unindent.
ERROR: Unknown target name: "<insert kconfig option here>"
Change-Id: I926afcab24a3032923b470dd31ac6ae11d0fc689
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Removes the following context based APIs:
isr_tick_get_()
isr_tick_get_32()
fiber_tick_get()
fiber_tick_get_32()
The routines sys_tick_get() and sys_tick_get_32() are to be used instead.
Change-Id: I3fa1338f174b10e783bfb00941edadfff16eeaba
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Standardizes appearance, corrects errors, improves readability,
and fils in gaps. Also relocates documentation for internal APIs.
Removes mention of non-existent task_sem_group_take() API from
the Kernel Primer document. The microkernel's semaphore group logic
currently allows a task to take a semaphore from a semaphore group
in a blocking manner.
Change-Id: Ib41a43775a97483a5adc552b70575ae4269aba35
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This routine allows the background task to sleep for a specified
number of ticks.
Change-Id: I2533005e3d9a564c2ca0de8333e224743cefb658
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds the following generic stack routines:
nano_stack_push()
nano_stack_stack_pop()
nano_stack_pop_wait()
Those routines are convenience wrappers for invoking the task, fiber and
ISR (if applicable) specific implementations.
Change-Id: I6e7bb2ca69bb2e3d5ed955654390746e76e4ab92
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds the following generic semaphore routines:
nano_sem_take()
nano_sem_take_wait()
Those routines are convenience wrappers for invoking the task, fiber and
ISR (if applicable) specific implementations.
Change-Id: I09d715d07263eb0ee526231120ba65d1e3feebce
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds the following generic lifo routines:
nano_lifo_put()
nano_lifo_get()
nano_lifo_get_wait()
nano_lifo_get_wait_timeout()
Those routines are convenience wrappers for invoking the task, fiber and
ISR (if applicable) specific implementations.
Change-Id: I5252e4643fe4772f1309b26c1b3e4319f5035956
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Do not depend on environment variables and use a kconfig variable
for defining the architecture.
In addition, remove the X86_32 variable, it just duplicates X86 for
not good reason, at least until start supporting MCUs with 64bit.
Change-Id: Ia001db81ed007e6a43f34506fed9be1345b88a4b
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When generating documentation for kconfig options, support
wildcards to be able to parse all relevant files.
Change-Id: Ifa565e3809996fcd13b0f15d61a4ffb108c1aa0a
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Update semaphore documentation to remove mention of command
packet sets, which no longer exist.
Change-Id: I19303f7f497b7d8299723d01c91ae4f4513162f0
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Add the tags required by doxygen for defining the group of the
kernel event logger.
Change-Id: I96ec6b6604da5a541ce8041e6fa3c324a03ff698
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
This reflects the changes made in commit df6be15aa5...
Change-Id: Ibe1bc167390268c0e335a0b4060a600ef55d1add
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Removes the Auto-generated text from the main heading. Changes the headings
to the consistent hierarchy used elsewhere in the documentation.
Change-Id: I146e4d7ac280b4a3bb81fc3263f826637a8bf08f
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Fixed typo in system_fundamentals. Acronyms FIFO and LIFO
defined with capital letters in kernel_fundamentals. Added bold
to paragraph lists to enhance readability in application_fundamentals
Added lots of :dfn: syntax for better interlinking to API.
Corrected whitespace for sub-bullet directive.
Change-Id: If6c5bc78746686d1a4986974f1b56bf9b2caebca
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
Add missing package "glibc-devel.i686" required to build project in fedora.
Change-Id: I1baf9a72b1ca2dbdd3aa65936875b43479779ed1
Signed-off-by: Javier B Perez Hernandez <javier.b.perez.hernandez@linux.intel.com>
The edit includes: correcting a previous rebase,
adding bullets for clarity, and other grammar fixes.
Change-Id: I9a6ac616b2eca5f2bab9728ebd8b7e50d3effbe1
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
Removes permalinks and sets the correct version and release. The change places
the copyright notice and license in the footer of every page.
Both copyright and license do not appear in the website's version.
Change-Id: Idb5171b24af004fc2f7aff42aab43469f26305b4
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We do not support xtools, although it can be used, it should not
be documented as an alternative.
Change-Id: I7be753393e4976b8c9610bdb33f1018dfef5eb95
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
To make the documentation readable from the source I want to get rid of the
substitutions for the project name an code name. This does not add any values
and makes it unreadable when looking at the text files directly. It also causes
some issues when people use those without actually knowing what they represent,
resulting in some weird and redundant language.
Change-Id: Icc70eef90966ed19531c3406fe7a6d1866f7d81d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
To make the documentation readable from the source I want to get rid of the
substitutions for the project name an code name. This does not add any values
and makes it unreadable when looking at the text files directly. It also causes
some issues when people use those without actually knowing what they represent,
resulting in some weird and redundant language.
Change-Id: I09e8cbbee7c1141a7a77d3ffff59cdae2b52050c
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
'About' alone conflicts with the website menu called about and is
none descriptive.
Change-Id: Ib112baded87b2a3175ba22d0efaddfcb46a18c8c
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add the kernel event logger documentation where the user can find
how to use this mechanism and which event logging points are
available currently.
Change-Id: I6d86c7b79c6b4a56a9e3514b6c4933a35e0c782f
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
A new note explains the correct ReST markup for links to the functions
in the API documentation extracted by Doxygen.
Change-Id: Ifd61794445bc559485dd4034ae68897271837939
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Adds the information regarding the application's directory structure
expected by the kernel and the build system. It includes how to create
a Makefile for the application's directory.
Change-Id: I4911bd86205831d7cdf1dea6095a9090ba9122b9
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Changes the labels to be consistent with the rest of the documentation.
Fixed other minor markup and language issues.
Adds the missing figures for apps_kernel_conf.rst
Change-Id: I34a7650c04bb2d1f525eaad4efa7395f8272c88f
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Update pre-commit checkpatch script to use project .checkpatch.conf
file.
Change-Id: I86ef9c64e9a13db2fd79fc5781eaa5456be78f36
Signed-off-by: Javier B Perez Hernandez <javier.b.perez.hernandez@linux.intel.com>
The instructions were made more to the point and clearer.
Optional and necessary steps are now easier to identify.
Change-Id: I3f4dc16b1dc0a7e64ae888ed050d266fa1d59645
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Based on Carol's original contribution. Edited based
on comments made to the original change.
Added better labels and links to other places in
the docs.
Change-Id: Iaff7d1849d7ab7c8276ac9fca87070442ce956fd
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Corrected the :envvar: markup. Rewrote the text to be less patronizing.
Change-Id: I09ec541ae41ad682106dc73a6e4495216dfa34d3
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Removed prerequisites to fix the flow of the doc.
Change-Id: Ieed03a08c2794fe50d6be3b7d3496da5f4c4471c
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Introduces the first part Carol's original contribution. The original
contribution is broken up in multiple files. The updated toctree shows
the
files that will constitute the section. Edits for clarity,
redability and markup were also included. The old files were removed.
Change-Id: I29364c6bc94322c6235b51850c2d1b9f71eb1ad8
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Removed the yous to be more concise and direct.
Second person phrasing can be overused making it redundant.
Change-Id: I849c0dce9a219962e724aade0cc4c5d57271cbe1
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Another pass to improve readability and eliminate wordiness
Change-Id: I028483b6630de195e157159e8491abde60bb683c
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
bt_init() is now static function and API should use bt_enable().
Change-Id: I565f30bf816282961b71ceae2bbe90d5d93e7b8a
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
After license text was changed correct also code lines.
Change-Id: Idd3f34c38bb8ff9a40b6c02755f9716a98a6e86f
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Performed edits based on Steve's comments. This new change fixes the
merge conflict of a previous version.
Change-Id: Ib99ed9a28da94c5780115ab0221edc9409e74919
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Edited for grammar, style, markup, linkage, consistency.
This change was resubmitted to avoid having a nickname as author.
Change-Id: Ie3a1a16c33939062ce2e139024afd2162a0c802d
Signed-off-by: Steve Ballard <stephen.r.ballard@intel.com>
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Minor changes to formatting to make guidelines clearer.
Edit for clarity, readability and markup. Cleared whitespace error.
Change-Id: I050857653303cfae32875b1b6c2151b22271c0b6
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Edit the content, adding bold text and headings for readability.
Revised the structure based on comments by developers.
Resubmitted to solve merge issues.
Change-Id: I7679eb7c71eab5cd18addcdb296c376923984494
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Book titles need italics, other minor issues Line length fixed.
Markup errors corrected.
Resubmitted to solve merge issues.
Change-Id: I069463a45655e1bd4c57828008c0868083757344
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Changed the existing API table to a list as it was done
in the Kernel Primer.
Change-Id: Ib0d7952c650316b414ac9258ab3c48e9f6c70c4e
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Remove unnecessary bullets and replaced them with indentation.
Added articles and performed other edits for clarity, markup and style.
Change-Id: I390d04a6a3c20eabde2eb100cac4fc88a3ca8cc8
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
The document was edited for clarity, style, consistency, grammar, and
spelling.
Change-Id: If1af5cfd8285bb13606a1bff257177521af7ab3d
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
The tables in the Kernel Primer are changed to lists. Making it easier
to update them. Other minor changes were done to ensure consitency.
The :c: and :cpp: markup has been fixed. When the documentation for a
call exists, then it is linked.
Change-Id: I8f389a0a0ca7c5fe904c0a1fa520e2e499f1001b
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Change all the Intel and Wind River code license from BSD-3 to Apache 2.
Change-Id: Id8be2c1c161a06ea8a0b9f38e17660e11dbb384b
Signed-off-by: Javier B Perez Hernandez <javier.b.perez.hernandez@linux.intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Edited file to have a friendlier tone regarding collaboration standards for the project.
Signed-off-by: Leona Cook <leonax.cook@intel.com>
Change-Id: I5e02b9d9065c3c9c4d96ed67215770167b9b94e1
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Updated as per Allan's comments to correct use of Zephyr
kernel in lieu of codename variable
Change-Id: Iaf5f8531c5452b6d8fb13318f00050aa63d99200
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
Editing language.rst file to clarify a few items
Also correcting a few things I missed earlier
Also fix title case without hyphen to be consistent
Change-Id: I463d1cdb436957a14af6ea40933f892a51b161aa
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
do not use microkernel or nanokernel as the output binaries,
instead, use zephyr globally.
Also change the documentation to reflect this.
Change-Id: I8405761d1a0392c90cdfeec5c67d72eb4e5a76ff
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Removed the word "file" after all the MDEF to avoid redundancy
Edited single line under overview folder in order to
gramatically correct the use of "file".
Change-Id: Ie785aa8c620f095fcd4171ef4efd2d056d6fa04b
Signed-off-by: Gerardo A. Aceves <gerardo.aceves@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Corrected formatting to produce cleaner HTML output.
Change-Id: I7f2f655498829ed7fd8c468e1d6d7d04d595f181
Signed-off-by: Gerardo A. Aceves <gerardo.aceves@intel.com>
Corrected minor grammar issues related to platform config description
Change-Id: I6960366ae088957dbff588adabc01adb15385066
Signed-off-by: Gerardo A. Aceves <gerardo.aceves@intel.com>
Adds the correct use of Doxygen grouping
for in-code documentation.
Change-Id: I25d2e9259e27808da8a032f91dfeff4711bc1f4b
Signed-off-by: Gerardo A. Aceves <gerardo.aceves@intel.com>
Remove the hard dependencies on EXPERIMENTAL symbol. Mark all the
symbols the relied on EXPERIMENTAL as EXPERIMENTAL in their prompt
Change-Id: I2779b0ed0776b3d510a8e2e44b35b83d7ad2377c
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The inconsistent and extended use of |codename| and |project| has been
corrected.
A sentence had to be changed dramatically to keep clarity.
Change-Id: I1e18a8c40298a46af002ddb226bb16ea0b508414
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Updated the SDK location in quick start documentation to the new Zephyr SDK 0.6
hosted in 01.org.
Change-Id: I8a362a27076b81fc867756497fc2cae5b360f4c5
Signed-off-by: Javier B Perez Hernandez <javier.b.perez.hernandez@linux.intel.com>
Corrected some punctuation characters to improve readability.
Change-Id: I44930a8a314f9fa5f3da216df3c7d2262c9cb1ef
Signed-off-by: Gerardo A. Aceves <gerardo.aceves@intel.com>
Format code blocks inside the main list, otherwise every block of code
breaks the list.
Change-Id: I6d48a0a3f8a3fedc832ebd9523eef52ea730b218
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Removed steps are not needed since Galileo grub from SPI loads grub
from SD card directly and user gets confused with unneeded
instructions.
Change-Id: I65aa114b808e0ac8dc8e6c3eb62ba4a51e2dbf2a
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
When line is split the html output does not format list correctly.
Change-Id: I942529d134ec6afc65ae11400a2702d5d7051cbd
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Use low case directories for grub and kernel and align them inside
list.
Change-Id: If701dc3520f823dd184e70f410141a8a2349edd3
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The current list is broken with output like below:
...
:file:` microkernel.elf` to the $SDCARD/kernel folder
...
Change-Id: I977f8365a2da9d25e34f39fb31407a31dd062f61
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Instead of loading all indexed doxygen symbols in one page, we
use the defined groups to load the API documentation in the specific
sections and reduce the trash coming from doxygen to just what we
need.
Change-Id: I030e3de33e8cc26871f95cd45a50af0cae1bb942
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Some functions are behind ifdefs, so defining those to allow
indexing and displaying in the documentation.
Change-Id: Id48dcc59b0793e0788f44ebd7c172f0bf3253ed2
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
toc tree.
In order to gerrit include the recommended practices
guidelines it need to appear in the toc tree.
Change-Id: Ib985fa2238bfd03e780dce2fda4242997f43eb06
Signed-off-by: Gerardo A. Aceves <gerardo.aceves@intel.com>
Grammar updates.
Corrected formatting to produce cleaner HTML output
Document structure is updated to reflect the current changes
within the entire documentation project.
Change-Id: Icc389ddec16ddfa40ecbbb5871af44563374415c
Signed-off-by: Gerardo A. Aceves <gerardo.aceves@intel.com>
Changes made to streamline using Gerrit recommended practices.
Changes included edits to grammar, punctuation, spelling,
word usage across multiple files.
Signed-off-by: steveballard123 <stephen.r.ballard@intel.com>
Change-Id: I286eb508abe10bb2ca0dd1b070fe7887fd5020e6
Rewrote and edited for clarity, punctuation, grammar, word usage.
Signed-off-by: Steve Ballard <stephen.r.ballard@intel.com>
Change-Id: I0332be9152312047a39067e7d610a563352abb1b
Revises and supplements information on concepts.
Change-Id: I7dd9dd2e99cd5d975cc0f617b076dcf13c414fd0
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
also add a readme saying files here are auto-generated.
Change-Id: Id33056192d8020c6cddcd12f406d15384db374ac
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Revises microkernel object sections to make it clear that objects
are referenced by name. (e.g. MY_TASK) Also adds text to make it
clear that task groups are named entities.
Change-Id: I3480f3526293dae7a0bab2006250c97334e04dfb
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The platform configurations micro_ti_lm3s6965_defconfig and
nano_ti_lm3s6965_defconfig are obsolete. The correct names
are micro_basic_cortex_m3_defconfig and nano_basic_cortex_m3_defconfig
respectively.
Change-Id: I0642008355a1abc70bc89db5202dab8266af4542
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The term "generic pc" is obsolete and has been supplanted by "ia32" and
"basic_xxx" as appropriate.
Change-Id: I7064eead81d526e2df89a7ccbfe1879f2e402f41
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds a note to the mutex documentation indicating that the priority
inheritance algorithm caps the raising of the priority at PRIORITY_CEILING.
Change-Id: Ie87efe83e3fa0fc8ba55e584692f8de44347eb1a
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Corrects the description of the priority inheritance algorithm used by mutexes.
It also draws attention to one of its short-comings.
Change-Id: I5aba6221fb9e9ed78e3bfe6509ca3d6e13743e71
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds in a couple of pieces of useful information which improve
alignment between task documentation and fiber documentation.
Change-Id: I04b65aa6d125842205de3dd6a65dbe2b8e6853d6
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Provides additional details about the use of fibers, following
the standard format now being used for kernel services.
Change-Id: Iee5cca7af213259f1dec53d75b729388fcf93bf8
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Fixes the following error when generating the apps_microkernel documentation.
.../apps_microkernel.rst:57:ERROR: Error in "code-block" directive:
unknown option: "lineos".
The option was supposed to be "linenos". The generated HTML document now
properly displays the sample MDEF file contents.
Change-Id: I510f2783ff656e980e222ffc6dc213e8dd45d136
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
This patch is based on some code contributed by Dirk Brandewie.
This is a generic data structure for queuing data in a FIFO ring
buffer. Any given data enqueued is annotated with an app-specific
type identifier, and small integral value. Use of a data pointer
is optional if the necessary information can be conveyed in the
annotations. We want all the metadata to fit in a single DWORD.
The ring buffer always contains at least one free dword in the
buffer to correctly distinguish between full and empty queues.
Concurrency control is almost nonexistent; depending on usage,
apps may want to introduce the usage of semaphores and/or mutexes
to preserve the integrity of the ring buffer or provide notifications
when data is available.
Change-Id: I860262d2afc96db4476d4c695a92f7da355ab732
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Renames the document to better reflect its true nature -- it is
a reference guide that provides information about existing platform
configurations, not a "how to" that provides information about
creating a new platform configuration.
Re-orders the platform configuration entries so that they appear
in alphabetical order, and moves the links to the individual
platform configuration sections to the end. This allows a reader
to use the table to identify a platform configuration of interest,
then click on the link that follows to obtain more details.
Note: It would be ideal if the link to a specific platform configuration
section could be embedded in the associated table entry, but the :ref:
tag doesn't seem to allow this.
Change-Id: I8865dcb54b8abd92658e00c3d7d17dcead4442ac
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The "introduction" section adds no value, and has already been
pruned from all of the other platform configuration guides.
Change-Id: I13bfd39d4806b3dd213a0d3f9023fd41e415db2a
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Adds in a label that can be used to reference the nanokernel semaphore
documentation, similar to what's available for other nanokernel services.
Change-Id: Ic97852e85b41a9e6e778dde820b98ea5be5f06f1
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The file is already included globally in conf.py
Change-Id: If1b37936a6f5654e1e0397314389985997d85b73
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Also move about_zephyr back to main page and remove duplicated
examples for nano kernel.
Change-Id: Icbc899ce5688d853a59dfc5c8d50f34048ed212b
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit fixes all warnings about cross-references and file names. It
addresses all mark-up issues. Only the warnings regarding Doxygen
objects and files that are intentionally not added to a toctree are left
unhandled.
Change-Id: I5d840522ea0bade4f183e447745244aecf893c94
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Changes the names and file structure for all code relevant collaboration
content. Updates the cross-references and figures where applicable.
Content was changed as little as possible.
Change-Id: If26499b12d7f49443167114e85d31709c01f5758
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
The master files are changed to reflect the new structure. This
structure is identical to the proposed structure.
Change-Id: Ic8e205d84f8a0b7f60fad621073c95af11008cb8
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Fixes minor content issues with the galileo documentation such as ...
1. Avoid use of "Zephyr projects"
2. Fix typos
Change-Id: Ie3e49cbebfe3cee819b85b005bb44916d6d96129
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Fixes minor content issues with the fsl_frdm_k64f documentation such as ...
1. Avoid use of "Zephyr projects"
2. Fix referenced variable and file names
3. Fix default value of NUM_IRQS Kconfig option
4. Fix typos
Change-Id: Id5f2d219fab7ba184f0b1ae1c0d28894e69faacc
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Fixes multiple instances of the following build error:
ERROR: Error in "code-block" directive:
maximum 1 argument(s) allowed, 3 supplied.
The revised text avoids the use of code-blocks, and improves readability
by highlighting the supported combinations of configuration options.
Change-Id: I6f495bcc2e6bada096e5d117e9f886d4a9fb6269
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds a preceding backslash to the '*' character in C-like comments to ensure
that they are not interpreted as belonging to part of an emphasis block.
Change-Id: Iac9da1fc68ace0b9829e1b687c163baa81040718
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Standardizes on the text formatting following a ".. note::" label.
1. No blank line after the label.
2. Uses an indentation of 3 spaces.
Change-Id: I9b28a88fef237fe5a8bb6eb2d6fb746f745598fd
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Fixes multiple instances of the following build warning by updating the
platform documentation to no longer use a unicode equivalent to the ' character.
WARNING: undecodable source characters, replacing with "?"
Change-Id: I226176cc4699be79692a3591c7b53772df6d1bef
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Fixes up the following minor issues in the various tables in the fsl_frdm_k64f
and galileo documentation.
1. Ensures that there is a space between the column '|' and text.
2. Eliminates inconsistent italicizing of table text.
3. Order of the "Interface" table matches "Supported Features"
4. Ensures that items are correctly identified.
Fix tables in fsl_frdm_64kf platform documentation
Change-Id: I5d9127bdde2f2af285d4344a8def3a81a11deb76
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Sections now make consistent use of the ####, ****, ====, and ----
headings so that the table of contents can be automatically generated
instead of relying upon a manually created table of contents.
Section names have been modified as necessary.
Change-Id: I57c2bb133de7ded07bb1e30d37c6a2850ccfb9c5
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Fixes up section names and the table of contents so that they align with
each other. This necessitates a little reworking of content and relocation
of sections.
Change-Id: Ib9766f2090cf949eaf9a0d7686d496301b88a407
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Updates the documentation as the quark platform configuration had been
previously renamed to 'galileo'.
Change-Id: I31e1920f30f57b243b07215fe92be08b5e5c9d59
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Except for the table, lines are now 80 characters or less.
Change-Id: I023f68b358806970899dd70a6cd49a0bee403dfa
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Revises the concepts section to better align with the conventions
used for other kernel object documentation.
Change-Id: Iaefe87ffa163fdaf091a4fc0f42afb9f0988cc7c
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Provides additional details about the use of nanokernel semaphores,
following the standard format now being used for kernel object types.
Change-Id: Iddd1c53ebbdbebdfa7e8bfa335d4d267c69ab572
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Provides a bit more detail, to better align with the descriptions
now used for other nanokernel object types.
Change-Id: I963c670d3b7fb5eedbe902bed66f1ce57d18eb12
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Provides additional details about the use of nanokernel FIFOs,
following the standard format now being used for kernel object types.
Change-Id: Ieccc94eee035413b22b1c8902df61e580f0920e8
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Provides additional details about the use of nanokernel FIFOs,
following the standard format now being used for kernel object types.
Change-Id: Ic6828c1730d160f79ae51ebf004d6af2e7adb7af
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Adds examples showing how to ...
1. initialize a nanokernel LIFO
2. write to a nanokernel LIFO
3. read from a nanokernel LIFO
Change-Id: I8b3646a3712b0aa3b5d3e432bdba63464753a6b5
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds a short section describing the nanokernel's background task.
This section is modelled on the section for microkernel tasks,
but excludes areas that aren't applicable to the background task.
Change-Id: Id209bad8ada222347cfcd01a3c822ca486bb48db
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Adds a short section to make clear that microkernel applications
can utilize fibers, and can even use them with a few microkernel
object types. Revises some link names to account for the fact that
there are now 2 sections describing fiber services.
Change-Id: I5960aea8b3959bb4a383f919882419effff5917d
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Revises description to follow the pattern used for other microkernel
object types. Expands the description to provide additional useful
details about the operation and use of FIFOs.
Change-Id: If4d84c301922158c2c7cae26cb1520294397876a
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Revises description to follow the pattern used for other microkernel
documentation sections. Revises the description to provide additional
important information, and to leave out information that isn't really
useful to application developers.
Change-Id: I4eac50bbb597258baf199ede925f14097f9ec75a
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Adds examples showing how to ...
1. initialize a nanokernel FIFO
2. write to a nanokernel FIFO
3. read from a nanokernel FIFO with a timeout
Change-Id: I6dbe741c2439a80e663f31372b11ef85b9e5b503
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds examples showing how to ...
1. initialize a nanokernel semaphore
2. give a nanokernel semaphore from an ISR
3. take a nanokernel semaphore with a timeout
Change-Id: I6d5c2c0616c1dd69b42f5e3002c8678c067fb0f2
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Removed the term _node from the documentation as requested.
Change-Id: I7fa42563f1fcc0631954a96c477af68ec56e7617
Signed-off-by: Gerardo A. Aceves <gerardo.aceves@intel.com>
Current documentation is not working and also badly formatted.
Change-Id: I885bacf641a84f4963e832dd67f597762ab54542
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
tick_get(), tick_get_32() and cycle_get_32() APIs were missing for
fibers.
Change-Id: Ic03880714f9f83f57b5c0599bc04b680fabea533
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The term 'context' is vague and overloaded. Its usage for 'an execution
context' is now referred as such, in both comments and some APIs' names.
When the execution context can only be a fiber or a task (i.e. not an
ISR), it is referred to as a 'thread', again in comments and everywhere
in the code.
APIs that had their names changed:
- nano_context_id_t is now nano_thread_id_t
- context_self_get() is now sys_thread_self_get()
- context_type_get() is now sys_execution_context_type_get()
- context_custom_data_set/get() are now
sys_thread_custom_data_set/get()
The 'context' prefix namespace does not have to be reserved by the
kernel anymore.
The Context Control Structure (CCS) data structure is now the Thread
Control Structure (TCS):
- struct ccs is now struct tcs
- tCCS is now tTCS
Change-Id: I7526a76c5b01e7c86333078e2d2e77c9feef5364
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
There is no concept of a "process" in the system, so remove last
mentions of that concept from free-form text (doc, comments, macro
parameter names).
Change-Id: Ic1b73371c448ed93b0db46bc9bb412d1e1dbc8bd
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Adds an example showing how to start a fiber from a task.
Change-Id: I5728d9b48650c60ab265924f436f78696849b915
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the names and file structure for all documentation collaboration
relevant content. Updates the cross-references and figures where
applicable. Content was changed as little as possible.
Change-Id: I8b3c59368fa288a43c87793bf731c7d8883df3ab
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Changes the names and file structure for all communication relevant
content. Updates the cross-references and figures where applicable.
Content was changed as little as possible.
Change-Id: Icd19d2f17a9ab0f11373a0d8a175d8c95ac0f44b
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
The collaboration content files have been placed in three folders. One
for communication, one for code collaboration and one for documentation
collaboration. This change only moves and renames the files. The
cross-references and file paths within the files have NOT ben change.
That is comming on the next change.
Change-Id: Ic09a51878ab432561bc394a4464570cc51a28d69
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
The configuration option documentation is autogenerated from
Kconfig files. This list right now applies only for x86.
Change-Id: Ibfc84324bb5e2206362d3bca6ab28aee0109f429
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Revises and supplements information on concepts and use cases.
Change-Id: I1ae8f9382b6fd98af59f2a8ef555830981807d5d
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Revises and supplements information on concepts, use cases, and
how to define an event.
Change-Id: I1de8c87d069288c14d6f378d96590fcc3d569801
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Now ordered from most basic semaphore type (events) to most complex
semaphore type (mutexes).
Change-Id: I4cf69ee2b87b10b8d962f963b3631d9bdae608e9
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The kernel's services previously referred to as "signalling services",
which include object types such as semaphores, events, and mutexes,
are now referred to as "synchronization services". This term more
clearly conveys their use as a means to synchronize the operation
of two or more entities within the kernel.
Change-Id: Id24b96f2daf7d866a2d134c222e3d0b6fc568f5a
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Corrects example code by eliminating unneeded characters.
Change-Id: I9bbc8a19b6b66807a366a2d514d62495b9371046
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Revise instructions to take advantage of the "public object"
and "private object" terminology now covered in the kernel
overview documentation. Also incorporates some missing information
the users need to be aware of when defining certain object types.
Change-Id: Ic0b359baf4443714c80200fdaff9cf2d253e6b99
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Mentions the open source nature of the Zephyr kernel and its
permissive licensing right up front, to help encourage potential
users who are concerned about GPL-type licenses.
Change-Id: I9250aae3caf5329cc58f547f381c32a94843ea03
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
A complete rewrite of the Overview section. The revised text
provides a more logical and comprehensive introduction to the
main concepts and capabilities of Zephyr, without providing
an excessive level of detail. (Those details should be provided
by the remaining sections of the Kernel Primer.)
This rewrite has also resulted in some small changes to the
About Zephyr and other Kernel Primer sections.
Change-Id: Idd4d5e0f0aabaaee8cd43d12563018ba4d8f7417
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Since file got relocated, path needs to be corrected.
Change-Id: Ic56b7ec23704ab4f71c95f8cefb273866c398fb8
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Point to Bluetooth applications location.
Change-Id: I3595a7f2403933d372f020099693a03e1197015b
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
irq_handler_set, irq_priority_set and irq_disconnect have been made
private by prepending an underscore to their names:
irq_handler_set -> irq_handler_set
irq_priority_set -> irq_priority_set
irq_disconnect -> irq_disconnect
The prototypes have been removed from header files when possible, and
extern statements used in C code where they were called.
_irq_priority_set() for ARM is still in the header file because
IRQ_CONFIG() relies on it.
Change-Id: I2ad585f8156ff80250f6d9eeca4a249a4477fd9d
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
task_event_set_handler -> task_event_handler_set
Align with the "verb at the end" convention.
Change-Id: I8b72d41a20a7fdd4756f90765682e317289a241b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
task_pipe_put_async -> task_pipe_block_put
task_mbox_put_async -> task_mbox_block_put
task_mbox_data_get_async_block -> task_mbox_data_block_get
task_mbox_data_get_async_block_wait -> task_mbox_data_block_get_wait
task_mbox_data_get_async_block_wait_timeout ->
task_mbox_data_block_get_wait_timeout
Previous names, focusing on 'async', were misleading, because:
- some of those APIs can be used synchronously as well
- other APIs can also do asynchronous transfer, and don't have 'async'
in their names
- the key concept of these APIs is that they use memory pool blocks
rather than raw data buffers.
Change-Id: I0c08a6cf950ab23bb4172ce25eb6f9886b037649
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This will move autogeneated html files to the final directory
which is copied by CI into the online documentation making the
raw doxygen html files accessible via <url>/api/
Change-Id: I79bc211377840358acfb94d4de839ce25d2830e0
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The text between @internal and @endinternal will only be
visible if INTERNAL_DOCS is set to YES.
Change-Id: Ic09669e59b819e6f3e7820f345cf1f17303c0e3c
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Improves previous patch that enabled doxygen GUI for Reference.
Navigate to forto-collab/docs/ html/index.html to view. Not
linked to main docs in this patch. Index changes to show a
collapsed view as default.
Change-Id: I4d0c23699f645c5c20ca3ad50c988a5729afa24f
Signed-off-by: Carol Lee <carol.lee@windriver.com>
Regroups documents into 3 sets::
1) Documents needed when first encountering Zephyr. (Basically what
you need to decide if you're interested in Zephyr, what it can do
for you, and how to get the code so you can experiment with it.)
2) Documents used when developing new Zephyr software.
3) Reference documents for Zephyr. (Having these on the main page
instead of a sub-page make sense, since the API guide and
configuration option guide will be consulted frequently by users.)
Change-Id: Ifee7ac83f041c24e1efbe3ba7379c21a2ba8b9bc
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Provides high level background material for Zephyr, to help newcomers
easily determine its suitability for their needs.
Change-Id: I2f843ad627024f601f163eafc7d965ecf44da8f9
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Describes atomic operations, including concepts, examples,
and APIs.
Change-Id: I701435508ae179623cf983590802040b35b0f286
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Updated the SDK location in quick start documentation to the new Zephyr SDK hosted in 01.org.
Change-Id: I7a7616763441d93f10563b1a05268126990fd527
Signed-off-by: Javier B Perez Hernandez <javier.b.perez.hernandez@linux.intel.com>
BSP terminology is obsolete; it has been supplanted by platforms and
platform configurations.
Change-Id: I105c7259e3eee6b0a0f67743d2b6b10ffb1db16f
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Removes an unnecessary level of headings in the microkernel and
nanokernel sections of the Zephyr kernel documentation, providing
users with direct access to the major service areas of the
microkernel and nanokernel from the main kernel web page. Also
greatly reduces the introductory text for these 2 sections,
since users can now easily find out what the various subsections
provide by simply clicking on them.
Change-Id: Ibc5858daad49cfb6567dfad285b7a1d5a755d149
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Re-incorporates task IRQ information into microkernel documentation.
Also eliminates an unnecessary hidden space character at the end of
every line.
Change-Id: Ib1328dfae7a53bcf8abead4a5ebf1cbaa5610826
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Describes nanokernel timer use, including concepts, examples,
and APIs.
Change-Id: Ibee277c62299e8cbe5c5093f097efd3596fbaf77
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Adds introductory text to highlight the limited signalling choices
provided by the nanokernel. Updates the semaphore API table to
incorporate missing APIs.
Change-Id: I947de383178f8710f0ae238a03f197102dac2845
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Partitions services into a separate file for each service. Updates
API tables to incorporate missing APIs.
Change-Id: Ia08b52b4865967beda02851cfe4a7d5ca4e8f596
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Added an API table to summarize available APIs. (Still need to
add examples of how to use to more significant ones.)
Change-Id: I371912ea77ad264ed0c96f129e8676ab866697db
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
leftovers from the renaming activities:
nano_node_tick_get_32 -> nano_tick_get_32
Change-Id: Ic9f0870ddda159311005c2ed16e0a378ab9a6a62
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Describes available services. Adds an example. Provides API table.
Change-Id: I99a2541fedc3bde3e23157a5fd85fb49dce1bf4d
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Fix documentation to link to autogenerated API entries.
Change-Id: I0355435c189bff17c4468b1f300dcffcce73e51d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Describes clocks available for use. Adds examples of direct clock
use. Provides API tables.
Change-Id: Icca8e1c8e75eed29c91f1387aed682dfdefdadb1
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Describes microkernel timer use only. Information about kernel
clocks and clock-related APIs will be documented elsewhere.
Change-Id: If868d9d93a0869e9535fbe0f807e72ccf816d15d
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Adds information about offloading work from a task to a fiber.
Change-Id: I600c47351158f1fbf80cc5da971560b0f028b979
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Placeholders were created for the missing content. The automatically
generated API docs were separated from the Doxygen collaboration guide.
The Kbuild User's Guide was moved unchanged.
Change-Id: I07dfed61bfbb3cad60372c57dc3cbdf627c872f0
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
The content of the files was left unchanged except for labels for
cros-referncing, the main title of the part and the tabs on the tables
which were changed to spaces. That last change ensures the integrity of
the tables independently of editor. The structure of the content files
will be revised at a later time.
Change-Id: I90477966fb3f4727d61e859d77682b529c83337d
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Moves the content found in the development part to the new Application
Development Primer. Creates a master file for the new part and a
placeholder for nanokernel-only applications. Labels that have already
been changed in prior changes of the topic were updated. The project's
master file was changed to include the new part.
Change-Id: I8e9df5b3e5d382997caf62b7503274e4821137e0
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Moves the Network Stack information to the Kernel Primer. Labels were
updated to reflect the new structure.
Change-Id: Iaea3cf3506476dee3f165eeb9c4c1fd49af54c90
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Moves the placeholder to the proper location.
Change-Id: I952640912714073f1e0ac4a0bcb2d2b320faaee4
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Moves the Nanokernel Object documentation to a new Nanokernel Services
section within the Kernel Primer. Labels, cross-references, figures,
headings and filenames were updated to reflect the new structure.
Change-Id: I04f97e712d78cd211a8ed1315f86895a51affa01
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Moves the Microkernel Object documentation to a new Microkernel Services
section within the Kernel Primer. Labels, cross-references, figures,
headings and filenames were updated to reflect the new structure.
Change-Id: Ia2a91410a94caa8a97bb8211db5afc84b5dc0974
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Moves the files from Architecture to the Overview section of the Kernel
Primer. Cross-references and figures were updated to reflect the new
structure. Headings and content were changed as little as possible.
These changes are needed to implement the proposed new structure of the
documentation. Content was changed as created as little as possible.
Change-Id: Id1f91ff6c8f858bfd48ad034594ba38531c7e1c4
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Creates the Kernel Primer, removes overview modules that are no longer
needed and updates the master file to include the new part.
Change-Id: I6d7f53f019089d502e763ecc1789fb152c90c465
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
The Quick Start Guide is now comprised by Installing, Building and
Running the Zephyr Kernel Guides. The Installing Guide contains all the
procedures needed to install the required components and get access to
the code. The Building Guide contains the procedure to build the kernel
using a sample application. The Running Guide contains the procedures to
run an application using QEMU or the Galileo 2 board. Files and folders
were renamed. The toctree directives were updated to reflect the new
names.
Change-Id: I4398befd4a24b12a50970c21a5288afa5c533fc8
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
This enable defining memory maps in source code in addition to
defining in MDEF files. This introduces the macro
DEFINE_MEM_MAP(mem_map_name, ...). The memory maps created this
way are the same, in functionality, as those defined in MDEF
files. They can be manipulated by the standard microkernel
memory map APIs.
Define the memory map using:
DEFINE_MEM_MAP(mem_map1, blocks, block_size);
and "mem_map1" can be used, for example:
task_mem_map_alloc(mem_map1, ...);
or,
task_mem_map_free(mem_map1, ...);
etc.
To use the memory map defined in another source file, simply add:
extern const kmemory_map_t mem_map1;
to the desired C or header file.
Change-Id: I9c551b90f9d0a95f961fd8ec1c5278c2ea44312d
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds unit test for microkernel private pipes.
The code piggybacks to the public pipe test (by
including the same source file), so any updates to
the test will be applied to both.
Note that the prj.mdef are different for both tests, since
the private pipes test move the pipes inside source
code. So, both mdef files will need to be updated at
the same time.
Change-Id: I6fdb5eab7c3a1d6f4b72c26a3620cee0188b07a5
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This enable defining pipes in source code in addition to
defining in MDEF files. This introduces the macro
DEFINE_PIPE(pipe_name, ...). The pipes created this
way are the same, in functionality, as those defined in MDEF
files. They can be manipulated by the standard microkernel
pipe APIs.
Define the pipe using:
DEFINE_PIPE(pipe1, size);
and "pipe1" can be used, for example:
task_pipe_put(pipe1, ...);
or,
task_pipe_get(pipe1, ...);
etc.
To use the pipe defined in another source file, simply add:
extern const kpipe_t pipe1;
to the desired C or header file.
Change-Id: Iae8e04706359bc18aae51acc75df3e3d26388882
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This enable defining tasks in source code in addition to
defining in MDEF files. This introduces the macro
DEFINE_TASK(task_name). The tasks created this
way are the same, in functionality, as those defined in MDEF
files. They can be manipulated by the standard microkernel
task APIs.
Define the task using:
DEFINE_TASK(task1, priority, entry_func, stack_size, groups);
and "task1" can be used, for example:
task_start(task1);
or,
task_abort(task1);
etc.
To use the task defined in another source file, simply add:
extern const ktask_t task1;
to the desired C or header file.
Change-Id: Ib2f3572950ca74b359b7fde1ccd6cfd04783eefb
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This enable defining mailboxes in source code in addition to
defining in MDEF files. This introduces the macro
DEFINE_MAILBOX(mailbox_name). The mailboxes created this
way are the same, in functionality, as those defined in MDEF
files. They can be manipulated by the standard microkernel
mailbox APIs.
Define the mailbox using:
DEFINE_MAILBOX(mailbox1);
and "mailbox1" can be used, for example:
task_mbox_put(mailbox1, &msg);
or,
task_mbox_get(mailbox1, &msg);
etc.
To use the mailbox defined in another source file, simply add:
extern const kmox_t mailbox1;
to the desired C or header file.
Change-Id: I32d4194af740f96fc8df8c6cd3144a0c9accb4ec
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This enable defining FIFOs in source code in addition to
defining in MDEF files. This introduces the macro
DEFINE_FIFO(fifo_name). The FIFOs created this
way are the same, in functionality, as those defined in MDEF
files. They can be manipulated by the standard microkernel
FIFO APIs.
Define the FIFO using:
DEFINE_FIFO(fifo1, depth, width);
and "fifo1" can be used, for example:
task_fifo_put(fifo1);
or,
task_fifo_get(fifo1);
etc.
To use the FIFO defined in another source file, simply add:
extern const kfifo_t fifo1;
to the desired C or header file.
Change-Id: I29667c4cfdcd0e6d189358478acf1a6149ecb826
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This enable defining semaphores in source code in addition to
defining in MDEF files. This introduces the macro
DEFINE_SEMAPHORE(semaphore_name). The semaphores created this
way are the same, in functionality, as those defined in MDEF
files. They can be manipulated by the standard microkernel
semaphore APIs.
Define the semaphore using:
DEFINE_SEMAPHORE(sem1);
and "sem1" can be used, for example:
task_sem_give(sem1);
or,
task_sem_take(sem1);
etc.
To use the semaphore defined in another source file, simply add:
extern const ksem_t sem11;
to the desired C or header file.
Change-Id: Ia9c128648f7a26fc776eeb8f6fcc4158b1712a97
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This enable defining mutexes in source code in addition to
defining in MDEF files. This introduces the macro
DEFINE_MUTEX(mutex_name). The mutexes created this way are
the same, in functionality, as those defined in MDEF files.
They can be manipulated by the standard microkernel
mutex APIs.
Sample usage:
DEFINE_MUTEX(mutex1);
void one_function(void)
{
task_mutex_lock_wait(mutex1);
...
task_mutex_unlock(mutex1);
}
To use the mutex defined in another source file, simply add:
extern const kmutex_t mutex1;
to the desired C or header file.
[ DL: This is a slightly modified version of similar patch
by Allan Stephens available at
https://oic-review.01.org/gerrit/3255 ]
Change-Id: Ib9cd8193eaf849a8aad1d217912759324ee8818e
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Enables standard doxygen GUI that shows relationships
and allows code access.Navigate to forto-collab/docs/
html/index.html to view. Not linked to main docs in
this patch.Index changes to show a collapsed view as
default.
Change-Id: If496f221924d3504d8d9d120e3d80650e724af48
Signed-off-by: Carol Lee <carol.lee@windriver.com>
Enhances description for task definition. Adds examples of most
frequently used task operations. Enhances descriptions in task
API tables.
Change-Id: I5b29e2e2715f7d672f375861ae01b26ffa762fc8
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The top make file has a documentation target that does not work.
Change it to work with our documentation and scripts.
Change-Id: Id32643900d122f54778e3179930f2e8e34387aa1
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit adds a quick reference on how to debug an
application with qemu and gdb.
Change-Id: Ib75465b110a65285dc55888fbfb95e8271ad83f9
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit updates information about Makefile variables
that define a project. It updates the definition for ARCH,
removes old BSP related definitions and adds definitions
for PLATFORM_CONFIG and O variables.
Change-Id: Id89251f576da0543b3349d75a87fa5b5e92326e7
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change zephyr-env.bash to zephyr-env.sh on installation_building.rst
due to the filename with .bash doesn't exist on tree.
Change-Id: I813968e9f8bd12efce457baa632177b1254b3601
Signed-off-by: Javier B Perez Hernandez <javier.b.perez.hernandez@linux.intel.com>
Enhances description for pipe definition. Adds examples of pipe
use. Enhances descriptions in pipe API table.
Change-Id: I14485a4c5ef964ab0000699a79d7632ee4130167
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Enhances description for mailbox definition. Adds examples of basic
mailbox use. Enhances descriptions in mailbox API table.
Note: Enhancement of the initial part of this document is left
for future commits, as are examples of more complex mailbox operations
like asynchronous send and receive.
Change-Id: I9a0b46f7e71242a113fab2ded395e068fefede84
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This change restructures the existing kbuild documentation. It adds the
labels to each module and does minor corrections in spelling, grammar
and ReST markup usage.
Change-Id: Id12705085a1f99e30204c7b82b4b95b28001cb00
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Enhances description of FIFO definition. Adds examples of FIFO use.
Enhances descriptions in FIFO API table.
Change-Id: I29eed159651eed8d078ddc23818812246e58514e
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Enhances description for event definition. Adds examples of event
use. Enhances descriptions in event API table.
Note: Enhancement of the initial part of this document is left
for future commits.
Change-Id: Ic754daacecbcb2b0ddc6b3a59d0a3b88d622662f
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Enhances description for semaphore definition. Adds examples of
semaphore use. Fills in gaps in the semaphore API table.
Note: Enhancement of the initial part of this document is left
for future commits.
Change-Id: I45a1326e564f20db2beed0c761584804ad61b053
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The contents are split in two: Zephyr Kernel and Zephyr Project. Under
Zephyr Kernel is all the content directly about the code base. Under
Zephyr Project is all the content about the development of the kernel
and of applications. Only the Doxygen document needed to be split. The
output of the in-code comments was placed under the Zephyr Kernel while
all the Doxygen guidelines and the extraction process information were
placed under the Zephyr Project.
Change-Id: I4f7b674d19449968e976b63f40bcaa9737cc0ecb
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
ISR documentation changed to incorporate new ISR functionality.
Change-Id: I35a95dab9f4fd407ff297f55faa1e3ebbefc8064
Signed-off-by: Carol Lee <carol.lee@windriver.com>
This text was originally used to illustrate the layout that would
be used for all microkernel object documentation, but it's no
longer needed since enough files have been converted to make
the approach self-evident.
Change-Id: I2646f7e7c0e541dd5930c13b2319aa85205a8111
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
If set, 'make qemu' will direct its console output to a named pipe and
disable the interactive monitor. Intended for use with the new sanity
check system which will parallelize test execution.
Change-Id: I902f77c02ed3f210891ff13147afea890e64d9c1
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Fixes the tables of the APIs so that they are displayed properly on the
HTML output.
Change-Id: I616def73e84d5b0ec51e5bc3fa0ce3673e9af344
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Removes the generic_pc and generic_pc_pentium4 platform configuration files
as Zephyr will not support them.
Change-Id: Iffa917d8e31702e6280eca3cbc9cdaf3f8ed9c98
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Removed "most important microkernel objects" and changed to
"microkerel objects are" and listed all the microkernel objects.
Change-Id: I18c63952085cc91f6d86045a86a5ea3b59982ee2
Signed-off-by: Carol Lee <carol.lee@windriver.com>
Split the contents of microkernel.rst into several files. Each file
contains only the information of a specific object type. Labels have
been added to accomodate cross-references to each object type. Changed
the tables that did not comply with a 100 character line length.
Change-Id: I983bc76a89b1cf01442de53737de4f76a5262264
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
The overview modules need to be updated after changing the file names.
The main overview module was not renamed. Therefore, no changes are
needed outside of the object folder.
Change-Id: I34590db3a680b2182aa86544820572a657b8e1ae
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
The object documentation files need to be renamed before they can be
split and restructured.
Change-Id: Ia3262885b801ed02b231ab14c6d4c0f4e2424cae
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Also scan for .S files, not .s. All .s files have been renamed to
.S.
Change-Id: I73f8fccc0a3be950d47020e86cc6d24ee1ad37c4
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This wasn't being used anywhere and seems to be a legcy of old sanity tests.
By removing this x86 is no longer a special case.
Change-Id: I78c668a7d9e6bc7c7f60d91712c4c21c0121b7e2
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Includes the procedure and updates all needed cross-references. The
procedure will include examples of MDEF, Makefiles and .conf files.
Change-Id: If5b3e88843a9257036265668765e3ad012818ae9
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
General information regarding the development of microkernel
applications is included. A step by step process is included but
still in development. Cross-references are added and updated as needed.
Change-Id: Ib7442883016c92c660d03d806009a0bd1932fce7
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
The license guidelines list which code licenses are acceptable and what
licenses can be problematic. It also includes the IANAL disclaimer. The
collaboration.rst was changed to include the new content.
Change-Id: I92081a13575453c68b2492129126be4b4cee9766
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Adds new Quark platform configuration documentation to support the Galileo board.
Change-Id: I00ccc01ee75dbd54721d2d36583e9c7626e237d8
Signed-off-by: Carol Lee <carol.lee@windriver.com>
Adds infrastructure for platform configuration guides,
starting with the fsl_frdm_k64f platform configuration.
Incorporates inline sphynx tags except :guilabel:
which does not bold gui labels, a feature needed
for scanning a procedure for key info.
Change-Id: I4f5154dae896449fb709842501c69d8757deca3e
Signed-off-by: Carol Lee <carol.lee@windriver.com>
Added a asterisk in front of every line of the comments to fully comply
with the Javadoc style. Updated all cross-references to comply with the
new style. Added a note indicating explicitly that enums are to be
documented just as structs.
Change-Id: If017e14e3e478ec28befb5c1fcae92090f91c32e
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Additional information regarding the microkernel is provided. Earlier
content was edited and some phrasing was improved in the introduction.
Change-Id: Ic940688d1b68dd410b0f2efecc73a7eff45fe6aa
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Added and updated cross-references. Made changes in content to increase
clarity based on feedback. Performed minor spelling, grammar and style
corrections.
Change-Id: I66c1920fd743a9b7f7a2b5313504c97bb7879afb
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Changed PIPE get APIs description to Get data off pipe instead of put data on.
Change-Id: If68b1f15541de1acd43df80cbd9799bb902fda0d
Signed-off-by: Javier B Perez Hernandez <javier.b.perez.hernandez@linux.intel.com>
Add a new theme inherited from sphinxdocs to allow zephyr
specific customisations and improvements.
Initially, it adds css style for guilabel and makes that
appear bold in html output.
Change-Id: I2c80b3be4d06ab73907d2f117ea84c847c0ddf7f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Changes the start tag of the comments from /*! to /** in order to comply
with the Javadoc commenting style.
Change-Id: Ie6c46f47ee0a7dd6be9788830620dd1c7ee51159
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
The architectural overview of the OS contains the general information
regarding the nanokernel, the microkernel, the driver model and the
application model.
Change-Id: I5a16f3f5ec5023239a772d3e559bd761795c27d4
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Memory Map text and examples added to current Objects documentation.
Code-block type changed from console to c and syntax error with file
tag.
Change-Id: Ib350425b3512e0d19d3e6a4c66ca73120a622a97
Signed-off-by: Carol Lee <carol.lee@windriver.com>
The documentation master file index.rst is changed to include the
documentation style guide.
Change-Id: I5074968d5e1be754c38f599a5220bf9596abd828
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
The guidelines contain how to tag content using the ReST markup employed
by Sphinx. Only the project specific rules are supplied. The general
syntax is provided by the Sphinx documentation. Examples and templates
are provided to make creating documentation easier.
Change-Id: If97e1f01de5d4f3de4cad82b7b35279a199433bf
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
The style guidelines are mandatory patterns of writing designed to ease
the creation of documentation for the Zephyr project. All authors, which
includes the developers, must adhere to the style guide.
More detailed information, including examples, will be added shortly.
Change-Id: I198e5fe90b279560a60c028260b1fc8c972d322a
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
The guidelines include information regarding: lists, modular writing,
notices, parallelism and simple English.
Also includes the capitalization, punctuation and spelling conventions
for the project.
Change-Id: I754f492db41dc5cc2432d03441b0526603b043e6
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Add basic Bluetooth documentation with sample.
Change-Id: I46077c8ee7e0ef464cda2374056fe061caaaee8b
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Now spells out the name of the associated microkernel object in full.
Also renames file containing FIFO code to correspond to the associated
public include file (microkernel/fifo.h).
Change-Id: I47f7a2ca01e0feff8f499acda0000fe475e7ee5a
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Now spells out the name of the associated microkernel object in full.
Change-Id: Iee532e9fbbcafbf9ba44c91de0894b7181285e8e
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Makes name more consistent with other CPU_CORTEX_M* options.
Change-Id: I65968cb300207ba0de6231d9a67f2720be77b6ba
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds a description for the mutex object, which is currently
undocumented. This text uses an enhanced structure that presents
the material in a more user-friendly manner.
Change-Id: I986be388b4943064d0449c2194de786fbad84863
Signed-off-by: Carol Lee <carol.lee@windriver.com>
This commit sends a draft of the topics that will be included
as a section for Kbuild documentation.
It also includes content for the Kconfig Structure section.
The intention of this draft is to start gathering comments on
the content sent and the initial menu of topics.
Change-Id: I11f62b015ef0fc722f5e0a089ec83cb0a08b3889
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
In gerrit documentation, use 'Change' instead of 'Patch'.
Use terminology similar to the gerrit help.
Change-Id: Ib521d5d8742e274510079e88e270f81f3f3e7a62
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
- Put license at the bottom
- Add a title
- Change disclaimer from a heading to a rubric
Change-Id: I19b73e3a0408fd95efb514e75ea4ee028bb8f50c
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit set back .S as the assembly code extension for Kbuild.
Change-Id: Ib0119876bd0bed6617bbfbad2ca6a44e172ab042
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This API now uses an approved Zephyr OS prefix.
Change-Id: I1041b982492ea7b76213e3b57cf28a9f17e7fd9d
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Converting the coding conventions documentation over to the new format
Change-Id: I9f2552436e59c48a9fb9103834ad5a5d9c4bcc0f
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
- Update naming where it makes sense
- Fix a few spelling and phrasing issues
Change-Id: If08a7c77a35624adfdaafc276850b6d896356441
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Updates this environment variable to reflect the new OS name.
Change-Id: Iba9230466fbfda786be7d1265927b4ecc4c7dd93
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The file extension indicates a "Microkernel DEFinitions" file,
and no longer reflects the obsolete VxMicro/Viper branding.
Change-Id: Ib95b271404a4a4737e851d603c371244fa609e4d
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Gets rid of single-line comments required by a previous set of
coding conventions. These comments provide no value to readers
and just clutter things up.
Change-Id: I2a08b12cf5026253de56979efdfc510e7e68defe
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This commit updates the installation documentation to be used with Kbuild.
Change-Id: Ic343e4e90d8e5849c098af1e37993446a0920aef
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
The in-code Documentation Guidelines contains the best practices for
documenting code using Doxygen. The guidelines offer options for both
novice and expert developers to document their code in a compatible and
correct manner.
Fully marked and simplified templates are provided to ease the
documentation effort.
Examples taken directly from Tiny Mountain's code show the difference
clearly.
The .c files contained here are used for the examples only and do not
have any function within Tiny Mountain.
Finally, the doxygen.rst file was updated to include the new content.
Change-Id: I6a39a54feed5fa95f2f21545c3967ff0755d85ae
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
- Extend the scanned files to include nano kernel headers
and source files.
- Add *.s to file pattern
Change-Id: I9d2566344f4a6bcfe0506e233fd6784704b9624e
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The disclaimer was added in a separate file keeping the master file
index.rst clean.
The master file was only changed to include the disclaimers.rst file.
Change-Id: I51a56c64dee3285ea3b9be22f0eab477459d8417
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Adds the basic kernel objects' documentation describing the function of
tasks, fiber and interrupt service routines.
Adds the nanokernel objects' docuementation describing the function of
the most important nanokernel objects.
Adds the microkernel objects' documentation describing the function of
the most important microkernel objects.
Changes the index.rst file to include the Object Documentation.
Change-Id: Ib35d973cc3575a7ecc32c4ab175e05cb298e3306
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In a list, the code blocks were causing the list numbering to restart
after each block, shifting them to the right helps keep the list numbers
right.
Change-Id: I5476114949422e8f917a46b041ee362faf4b81e2
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change documentation for usage with kbuild based make system.
Change-Id: I4071d65c3eaf69a91b93e13e71d6f44a12edc317
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
- Fix missing spaces between package names
- Move optional software to its own section, no need to have
it in the main requirement section if it is options
- crosstool-NG instead of crosstool-next Generation. Treat that
as a brand name.
- Fixed command line for installing groups with yum
- minor fixes
Change-Id: Ib231bb09dea3aa6d3af00961eae8a2e3d6ded011
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Includes the Collaboration Guideline. It contains the infromation
regarding the use of the mailing list, Gerrit, the coding style and
other usefull collaboration information.
This Collaboration Guideline is constantly changing as new methods of
collaboration are used.
Change-Id: I9f1e66556e99defa8729f87f19052b539e8628d3
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Includes the Linux Installation Guide. It contains the requirements and
required steps to install a development environment and to run a sample
application. The optional steps include information regarding running
Tiny Mountain on additional hardware.
Change-Id: I0f0c78fbec6816310d893b40dea5649ead98e92f
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Includes an explanation of how the in-code documentation is integrated
using Doxygen / Breathe and the raw generated output from the code.
These files are needed to understand how the in-code comments flow into
the documentation and to be able to display and link to those comments
from the documentation.
Change-Id: I275f8c32cfe889da43b4db5b8037e52876ae3c68
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Includes the documentation license, a
substitutions file and a README detailing the new infrastructure and its
installation.
Updates the master file, index.rst, to accomodate the content files.
Change-Id: I529567e6e29d24a4261c0fa4b3db1176266f9777
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Configures Doxygen to generate its output inside the doc/xml folder. It
also configures Breathe to look for that output in that location.
Patset 2: Changed the project name to Tiny Mountain included aditional
files for Doxygen.
Change-Id: I8514dc7035b196fae365d2f02fe9f6ca54584af0
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This will allow us to start adding content and structure.
To generate documentation you will need to install both
- sphinx
- breathe
go into the doc directory and run:
$ make doxy html
No content has been submitted here, only a few placeholders.
Change-Id: Ifc3617aee8f7d45fa4e4a494ff0a1ab71516af06
Signed-off-by: Anas Nashif <anas.nashif@intel.com>