michaelh/zephyr
1
0
Fork 0
Code Releases Activity

doc: Moved Quark D2000 CRB info to wiki.

Browse source 
Moved the Quark D2000 CRB information from
quark_d2000_crb.rst to the Zephyr wiki.

Change-Id: I62b6970633570c6af2d8d946d5621b032ff10467
Signed-off-by: Evan Couzens <evanx.couzens@intel.com>
This commit is contained in:
Evan Couzens 2016-06-23 14:04:13 -07:00 • committed by Inaky Perez-Gonzalez
commit 9a2d8b7e29
1 changed files with 2 additions and 143 deletions
Download patch file Download diff file Expand all files Collapse all files

145
doc/board/quark_d2000_crb.rst
View file

@ -3,147 +3,6 @@
Quark D2000 CRB
###############
Overview
********
The Intel® Quark ™ microcontroller D2000 package is shipped as a 40-pin QFN
component.
Intel™ Quark® microcontroller D2000 contains the following items:
- On-board components:
- Accelerometer/Magnetometer sensor
- UART/JTAG to USB convert for USB debug port
- Expansion options:
- “Arduino Uno” compatible SIL sockets ( 3.3V IO Only )
- Other connectors:
- 1x USB 2.0 Device Port – micro Type B
- On-board coin cell battery holder
- 5V input a screw terminal/header (external power or Li-ion)
- EEMBC power input header
Board Layout
************
General information for the board can be found at the `Intel Website`_,
which includes both `schematics`_ and BRD files.
Supported Features
******************
+-----------+------------+-----------------------+
| Interface | Controller | Driver/Component |
+===========+============+=======================+
| MVIC | on-chip | interrupt_controller |
+-----------+------------+-----------------------+
| UART | on-chip | serial port-polling; |
| | | serial port-interrupt |
+-----------+------------+-----------------------+
| SPI | on-chip | spi |
+-----------+------------+-----------------------+
| I2C | on-chip | i2c |
+-----------+------------+-----------------------+
| GPIO | on-chip | gpio |
+-----------+------------+-----------------------+
| PWM | on-chip | pwm |
+-----------+------------+-----------------------+
Developing for the D2000
************************
The D2000 board configuration details are found in the project's tree at
:file:`boards/quark_d2000_crb`. The make target for this board is
quark_d2000_crb.
Building a Binary
-----------------
To build a Zephyr applications for the D2000 board, the ``BOARD`` configuration
option must be defined at compile time. Follow these steps to build the
hello_world application as an example.
#. Source the :file:`zephyr-env.sh` file.
#. Change directories to the application directory. For hello_world this is:
.. code-block:: console
$ cd $ZEPHYR_BASE/samples/hello_world/nanokernel
#. Build the binary:
.. code-block:: console
$ make pristine && make BOARD=quark_d2000_crb ARCH=x86
Flashing a Binary
-----------------
Make sure a ROM binary has been flashed; the D2000 is flashed without
it. Instructions on how to build and flash it are in
https://github.com/01org/qmsi.
#. Since the board has a built-in JTAG; it is possible to flash the device
through the USB only. Set the following jumpers to enable the built-in JTAG:
+--------+------+--------+------+------+
| Jumper | UART | Common | JTAG | Name |
+========+======+========+======+======+
| J9 | Open | X | X | TDO |
+--------+------+--------+------+------+
| J10 | Open | X | X | TDI |
+--------+------+--------+------+------+
| J11 | Open | X | X | TRST |
+--------+------+--------+------+------+
| J12 | X | N/A | X | TMS |
+--------+------+--------+------+------+
| J17 | X | N/A | X | TCK |
+--------+------+--------+------+------+
#. Connect the D2000 via USB to the host computer.
#. Once the binary is built, it can be flashed to the device by:
.. code-block:: console
$ make BOARD=quark_d2000_crb ARCH=x86 flash
Debugging a Binary
------------------
To debug an application on the D2000 platform, follow these steps. As an
example, we are using the hello_world application.
#. Source the :file:`zephyr-env.sh` file.
#. Go to the application's folder:.
.. code-block:: console
$ cd $ZEPHYR_BASE/samples/hello_world/nanokernel
#. Verify the final binary is in :file:`outdir/zephyr.elf`.
#. If the binary is not there, please re-build using the steps described above.
#. To enable the debug process, enter:
.. code-block:: console
$ make BOARD=quark_d2000_crb ARCH=x86 debug
Bibliography
************
.. _Intel Website:
http://www.intel.com/content/www/us/en/embedded/products/quark/mcu/d2000/quark-d2000-crb-user-guide.html
.. _schematics:
http://www.intel.com/content/www/us/en/embedded/products/quark/mcu/d2000/quark-d2000-crb-schematics.html
The board documentation for the Quark D2000 CRB has been moved to the Zephyr project wiki:
https://wiki.zephyrproject.org/view/Quark_D2000_CRB