Configure SWO reference frequency to be the same as
CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC. This should make all ST boards ready to
be used with SWO, without configuring any other devicetree property.
Tested with NUCLEO-L476RG and NUCLEO-H563ZI.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
This commit follows the parent commit work.
This commit introduces the following major changes.
1. Move all directories and files in 'include/zephyr/arch/arm/aarch32'
to the 'include/zephyr/arch/arm' directory.
2. Change the path string which is influenced by the changement 1.
Signed-off-by: Huifeng Zhang <Huifeng.Zhang@arm.com>
It doesn't make sense to keep the aarch32 directory in the
'arch/arm/core' directory as the aarch64 has been moved out.
This commit introduces the following major changes.
1. Move all directories and files in 'arch/arm/core/aarch32' to
'arch/arm/core' and remove the 'arch/arm/core/aarch32' directory.
2. Move all directories and files in 'arch/include/aarch32' to
'arch/include' and remove the 'arch/include/aarch32' directory.
3. Remove the nested including in the 'arch/include/kernel_arch_func.h'
and 'arch/include/offsets_short_arch.h' header files.
4. Change the path string which is influenced by the changement 1
and 2.
Signed-off-by: Huifeng Zhang <Huifeng.Zhang@arm.com>
Remove `threshold-reg-offset` DT property and implement them with static
inline functions in `reg_def.h`
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Add multi-device support in npcx adc driver since there is more than one
adc module in npcx4 series. And each adc's reference voltage might be
different, this CL introduces the `vref-mv` prop. to select its own
reference voltage.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Signed-off-by: Kate Yen <htyen@nuvoton.com>
The 'CCFG' (Customer Configuration) occupies 88 bytes in topmost flash
sector (8 KiB) and is by default always included in the final image.
This disables including CCFG part when building images for chain-loading
by the MCUboot bootloader.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
Added devicetree and Kconfig for EFR32MG12P433F1024GM68, needed for
the BRD4170A radio board by Silicon Labs.
Signed-off-by: Warren Buffer <warren.buffer78@gmail.com>
Implement the hook for sys_poweroff based on the SOFT_OFF code. Note
that standby mode was a substate of SOFT_OFF, however, it was not
supported judging from defined DT states. It can be added later using
the STANDBY state.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Implement the sys_poweroff() hook. The hsem locking is not part of the
implementation, it doesn't seem necessary after
https://github.com/zephyrproject-rtos/zephyr/pull/42409 but I may be
wrong. Needs verification.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
SOFT_OFF state (which translates to standby) doesn't seem to be
supported according to the L0 DT files. Also, by definition soft off
implies context loss, ie boot from scratch, but the implementation
expected a call to the PM exit hook.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
drivers: adc: adc_sam0: fix c20 and c21 reference not setting
On c20 and c21 variants, the adc_sam0 driver is failing to honor the
enable-protected status of the REFCTRL register when writing the channel
config's reference into it. This causes the reference to never be set
when adc_sam0_channel_setup is called since the ADC is not disabled
prior to the write. Fix it by adding the
ADC_SAM0_REFERENCE_ENABLE_PROTECTED definition to the c20 and c21 soc.h
files. This effectively disables the ADC during writes to the REFCTRL
register, thus honoring the enable-protected behavior of this register.
I'm assuming ADC_SAM0_REFERENCE_ENABLE_PROTECTED exists for this type
of situation and therefore this was the approach taken. After making
the change, I was able to verify proper ADC readings by measuring
voltage on an ADC pin and observing correct values. Reverting back prior
to this change, running the same test yields reading 0's.
Fixes: #61975
Signed-off-by: Tristen Pierson <tpierson@bitconcepts.tech>
System memory declared by the MPU as 'Strongly Ordered'
with region attributes which will inhibit the speculative fetch,
preventing the Flash RDSERR.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Move workaround methods for npcx series to soc init functions. If
there's no workaround for this series, drop its soc.c file directly.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
This patch adds definitions for the nRF9131,
which is software-compatible with nRF9161.
Signed-off-by: Maximilian Deubel <maximilian.deubel@nordicsemi.no>
In case of stm32h5 both LL_DBGMCU_EnableTraceClock() and
LL_DBGMCU_SetTracePinAssignment() need to be called in order to properly
configure SWO output.
Select HAS_SWO, so that logging over SWO can be enabled.
Tested with ST's fork of openocd [1].
[1] https://github.com/STMicroelectronics/OpenOCD
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Update iMX RT boot header to support CONFIG_XIP=n, when the image is not
linked into the flash space. Also, update the boot header to correctly
calculate the flash used size within the boot data header. This field is
used by the iMX boot ROM to determine how much data to copy when running
from RAM, so using the correct size fixes an issue where the ROM would
copy more data than needed.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
The CMSIS module glue code was part of arch/ directory. Move it to
modules/cmsis, and provide a single entry point for it: cmsis_core.h.
This entry header will include the right CMSIS header (M or A/R).
To make this change possible, CMSIS module Kconfig/CMake are declared as
external, allowing us to add a new Zephyr include directory.
All files including CMSIS have been updated.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This CL introduces new Flash Interface Unit (FIU) hardware in npcx4
series. The different operations of npcx9 and npcx4 FIU include:
1. 4-byte mode support for DRA mode move to SPI_DEV reg
2. To access the second flash in DRA mode, we need to configure
SPI_DEV_SEL field in BURST_CFG additionally.
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
This CL introduces new clock architectures in npcx4 series and wraps
clock configurations of different series by device tree files.
For example, the PWDWN_CTLx reg initialization relies on `pwdwn-ctl-val`
prop of pcc DT node now.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
This CL adds the soc drivers for npcx4 series. Besides adding npcx4m3f
and npcx4m8f support, we also modified the register offset of
LV_GPIO_CTL and PUPD_EN for npcx4 series.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
The XEC clock control driver sample code uses enum indexes to offset to
the desired GPIO CTRL register of the package. These enums are only
used in this example code and are being removed in favor of calculated
indexing into the specific GPIO register memory map.
Signed-off-by: Jeff Daly <jeffd@silicom-usa.com>
Move arm_mpu_mem_cfg header to common include directory.
The benefits are two-fold:
- Allow for out of tree SoC definitions to use them to
define mpu_regions.
- Remove odd relative include path
Signed-off-by: Moritz Fischer <moritzf@google.com>
Reduce the main clock frequency from 150MHz to 144MHz which allows meeting
the full range of CAN bitrates.
Fixes: #60811
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Since bb590b5b6e, which enforces a more consistent ordering of
initialisation for devices, the ECIA initialisation was happening after
GPIO initialisation. This caused interrupts to stop working on GPIO
input.
This patch fixes that by increasing the default GPIO initialisation
priority, so that it happens after ECIA.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
Since bb590b5b6e, which enforces a more consistent ordering of
initialisation for devices, the SOC initialisation was happening after
GPIO initialisation. This caused interrupts to stop working on GPIO
input.
This patch fixes that by increasing the default GPIO initialisation
priority, so that it happens after SOC.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
openamp shared memory regions can be anywhere in DDR memory
withing 2G range. Current SRAM_PRIV region is 64M which
prevents access of shared memory (vrings) by RPU (cortex-r5)
if it is out of 64M range. This patch allows vrings to be in DDR within
2G address space.
Developed-by: Dan Millea
Commited by: Tanmay Shah
Signed-off-by: Dan Milea <dan.milea@windriver.com>
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
Configure ENET_REF_CLK direction as input when
CONFIG_ETH_MCUX_RMII_EXT_CLK is set to allow Ethernet external clock
usage.
Signed-off-by: Benjamin Lemouzy <blemouzy@centralp.fr>
