Updated the clocks that get initialized for the MCXN947
when using the LPTMR. The LPTMR allows the user to select
and Input clock, however said input clock must be
initialized before the user can select it.
Update description for clk-source in binding file.
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
Currently this code related to how to configure the
flash size and address when using flexspi to XIP is copy
pasted in all sort of places and ways all over the tree,
let's clean this up and have single point of control over
this configuration.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
To prepare for supporting flexcan, can node should be
renamed to canxl to support both flexcan and canxl
Signed-off-by: Tu Nguyen Van <tu.nguyenvan@nxp.com>
Add the support of the reset-cmd property for the stm32h7 disco kits
where the quad-spi flash is mt25ql512ab
This device accepts the SPI_NOR_CMD_RESET_En/SPI_NOR_CMD_RESET_MEM
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Configures pins for the SPI instance attached to the Pmod connector to
enable using this board with the pmod_acl shield.
Signed-off-by: Maureen Helm <maureen.helm@analog.com>
Adds a new shield definition for the Digilent Pmod ACL module. This
module provides support for an ADI ADXL345 3-axis accelerometer over a
Pmod SPI connector.
Signed-off-by: Maureen Helm <maureen.helm@analog.com>
Add missing braces to comply with MISRA C:2012 Rule 15.6 and
also following Zephyr's style guideline.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Add initial support for npcm400 evaluation board
Signed-off-by: Tyrone Ting <kfting@nuvoton.com>
Signed-off-by: James Chiang <cpchiang1@nuvoton.com>
Signed-off-by: Joseph Liu <kwliu@nuvoton.com>
ESP32-C3-DevKit-RUST-1 is a ESP32C3 based board
that includes a builtin LED, button, WS2812,
temperature and humidity sensor (SHTC3) and a IMU
(ICM42670).
Signed-off-by: Lucas Tamborrino <lucas.tamborrino@espressif.com>
Add LPTMR driver counter support for NXP frdm_ke17z and frdm_ke17z512
boards, tested 'drivers.counter.basic_api' case.
Enable cpu power states and determine the default
CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC from devicetree when using the
Arm SysTick hardware timer.
Signed-off-by: Anke Xiao <anke.xiao@nxp.com>
MAX32690EVKIT board has CFAF128128B1-0145T display which
is 128x128 graphic display.
The pins goes to display is not standard SPI interface, it requires
SPI bitbanging to drive display.
This commit enables mpi dbi display support with LVGL graphic library
Pin connection of display is 3wire mode
Signed-off-by: Sadik Ozer <sadik.ozer@analog.com>
MAX32680EVKIT board has CFAF128128B1-0145T display which
is 128x128 graphic display.
This commit enables mpi dbi display support with LVGL graphic library
Pin connection of display is 3wire mode
Signed-off-by: Sadik Ozer <sadik.ozer@analog.com>
MAX32672EVKIT board has CFAF128128B1-0145T display which
is 128x128 graphic display.
This commit enable mpi dbi display support with LVGL graphic library.
Pin connection of display is 3wire mode
Signed-off-by: Sadik Ozer <sadik.ozer@analog.com>
Update the bus_clk divider value from 4 to 2 for frdm_ke17z512
platform. The bus and flash clocks are raised to 16Mhz to ensure
that `tests.kernel.timer.timer_jitter_drift` sample passes.
Signed-off-by: Anke Xiao <anke.xiao@nxp.com>
Add support for the ST nucleo h755zi_q board which
uses an stm32h755 in the st nucleo-144 board
format.
Signed-off-by: Mike Banducci <michael.banducci@sandc.com>
Change NuMaker M463/M467 series USBD clock source to HIRC48M.
This makes core-clock and its clock source PLL not required
to be multiple of 48MHz.
Signed-off-by: Chun-Chieh Li <ccli8@nuvoton.com>
Background of this modification is to make clock control
driver code provided by Renesas vendor to support for Renesas MCU
on Zephyr.
Signed-off-by: Quy Tran <quy.tran.pz@renesas.com>
Some tables used more than 120 characters per line. This commit compresses
the formatting of the tables in the documentation.
Signed-off-by: Jonas Remmert <j.remmert@phytec.de>
This commit add the description of the fmc in the SoC stm32l5, and the
description of the screen controller st7789v in the board stm32l562e-dk.
Signed-off-by: Miguel Gazquez <miguel.gazquez@bootlin.com>
Add support for using the stm32 fmc to interact with a display
controller, using Intel 8080 protocol with a 16 bits parallel bus.
Signed-off-by: Miguel Gazquez <miguel.gazquez@bootlin.com>
Replace native_posix w native_sim in the comments,
and account for the fact that we have several nrf bsim targets now
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is deprecated. Let's remove its mentions
from the general docs and figures.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
i.MX 93 EVK has a series of digital MUXes controlled by ADP5585 GPIO
expander. This commit adds board level initialization to such MUXes to
control these MUXes.
Signed-off-by: Chekhov Ma <chekhov.ma@nxp.com>
Support rgpio/lpuart peripherals
Support linkserver/jlink debug ways
Test cases: hello_world; button; blinky; synchronization; philosophers
There is one limitation with flashing and debugging the SoC's second
core(M7) that will be addressed with furture submission
Signed-off-by: Lucien Zhao <lucien.zhao@nxp.com>
