Cleanup and preparation commit for linker script generator.
Zephyr linker scripts provides start and end symbols for each larger
areas in the linker script.
The symbols _image_text_start and _image_text_end sometimes includes
linker/kobject-text.ld. This mean there must be both the regular
__text_start and __text_end symbols for the pure text section, as well
as <group>_start and <group>_end symbols.
The symbols describing the text region which covers more than just the
text section itself will thus be changed to:
_image_text_start -> __text_region_start
_image_text_end -> __text_region_end
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Cleanup and preparation commit for linker script generator.
Zephyr linker scripts provides start and end symbols for each larger
areas in the linker script.
The symbols _image_rom_start and _image_rom_end corresponds to the group
ROMABLE_REGION defined in the ld linker scripts.
The symbols _image_rodata_start and _image_rodata_end is not placed as
independent group but covers common-rom.ld, thread-local-storage.ld,
kobject-rom.ld and snippets-rodata.ld.
This commit align those names and prepares for generation of groups in
linker scripts.
The symbols describing the ROMABLE_REGION will be renamed to:
_image_rom_start -> __rom_region_start
_image_rom_end -> __rom_region_end
The rodata will also use the group symbol notation as:
_image_rodata_start -> __rodata_region_start
_image_rodata_end -> __rodata_region_end
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Cleanup and preparation commit for linker script generator.
Zephyr linker scripts provides start and end symbols for each section,
and sometimes even size and LMA start symbols.
Generally, start and end symbols uses the following pattern, as:
Section name: foo
Section start symbol: __foo_start
Section end symbol: __foo_end
However, this pattern is not followed consistently.
To allow for linker script generation and ensure consistent naming of
symbols then the following pattern is introduced consistently to allow
for cleaner linker script generation.
Section name: foo
Section start symbol: __foo_start
Section end symbol: __foo_end
Section size symbol: __foo_size
Section LMA start symbol: __foo_load_start
This commit aligns the symbols for _data_ram/rom to other symbols and in
such a way they follow consistent pattern which allows for linker script
and scatter file generation.
The symbols are named according to the section name they describe.
Section name is `data`
A new group named data_region is introduced which instead spans all the
input and output sections that was previously covered by
__data_ram_start, __data_ram_end, and __data_rom_start.
The following symbols are aligned in this commit:
- __data_ram_start -> __data_region_start
- __data_ram_end -> __data_region_end
- __data_rom_start -> __data_region_load_start
The following new symbols are introduced so that the data section is
aligned with other sections:
- __data_end
- __data_start
value identical to __data_region_start but describes start of
the section.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Current location options for linker source files includes init and
noinit ram data, but only a noinit ram section. This makes it impossible
for application code to define an initialized RAM output section,
such as with the Z_ITERABLE_SECTION_RAM() helpers.
Adding a DATA_SECTIONS linker source option for this use case.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Adds the necessary bits to initialize TLS in the stack
area and sets up CPU registers during context switch.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The `TEXT_SECTION_OFFSET` symbol is used to specify the offset between
the beginning of the ROM area and the address of the first ROM section.
This commit renames `TEXT_SECTION_OFFSET` to `ROM_START_OFFSET` because
the first ROM section is not always the `.text` section.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Remove Kconfig, linker script, and related bits associated with
CUSTOM_RODATA_LD, CUSTOM_RWDATA_LD, CUSTOM_SECTIONS_LD,
SOC_NOINIT_LD, SOC_RODATA_LD, and SOC_RWDATA_LD options that have been
deprecated since Zephyr 2.2.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert DT_CODE_PARTITION_{OFFSET,SIZE} to use new
DT_REG_ADDR/DT_REG_SIZE macros instead based on
DT_CHOSEN(zephyr_code_partition).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The riscv linker scripts utilize DT_FLASH_BASE_ADDRESS and
DT_FLASH_SIZE, as we want to phase out the old generator we need to
replace these defines with macros from devicetree.h.
We support two flash configurations at this point, either a QSPI flash
like on the hifive board or a SoC flash like on the rv32m1_vega. We
update the linker scripts to check the compat of the zephyr,flash node
and based on if its 'jedec,spi-nor' or 'soc-nv-flash' we determine how
to extract the "flash" base address and size.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
In zephyr_linker_sources().
This is done since the point of the location is to place things at given
offsets. This can only be done consistenly if the linker code is placed
into the _first_ section.
All uses of TEXT_START are replaced with ROM_START.
ROM_START is only supported in some arches, as some arches have several
custom sections before text. These don't currently have ROM_START or
TEXT_START available, but that could be added with a bit of refactoring
in their linker script.
No SORT_KEYs are changed.
This also fixes an error introduced when TEXT_START was added, where
TEXT_SECTION_OFFSET was applied to riscv's common linker.ld instead of
to openisa_rv32m1's specific linker.ld.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
generated_dts_board.h is pretty redundant and confusing as a name. Call
it devicetree.h instead.
dts.h would be another option, but DTS stands for "devicetree source"
and is the source code format, so it's a bit confusing too.
The replacement was done by grepping for 'generated_dts_board' and
'GENERATED_DTS_BOARD'.
Two build diagram and input-output SVG files were updated as well, along
with misc. documentation.
hal_ti, mcuboot, and ci-tools updates are included too, in the west.yml
update.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The SRAM address and size are currently available as both
DT_SRAM_{BASE_ADDRESS,SIZE} and as CONFIG_SRAM_{BASE_ADDRESS,SIZE} (via
the Kconfig preprocessor).
Use the CONFIG_SRAM_* versions everywhere, and remove generation of the
DT_SRAM_* versions from gen_defines.py.
The Kconfig symbols currently depend on 'ARC || ARM || NIOS2 || X86'.
Not sure why, so I removed it.
It looks like no configuration files set CONFIG_SRAM_* at the moment, so
another option might be to use the DT_* symbols everywhere instead. Some
Kconfig.defconfig.series files add defaults to them though.
Also improve the help texts for CONFIG_SRAM_* to say that they normally
come from devicetree rather than configuration files.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Before introducing the code for ARM64 (AArch64) we need to relocate the
current ARM code to a new AArch32 sub-directory. For now we can assume
that no code is shared between ARM and ARM64.
There are no functional changes. The code is moved to the new location
and the file paths are fixed to reflect this change.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
to its own linker file snippet so snippets can be placed before it.
Using zephyr_linker_sources().
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
RISCV_RV32M1_VECTOR_BASE_ADDR is unused after commit 34b0516466
("boards: riscv32: rv32m1_vega: enable MCUboot for ri5cy core") (it was
called RISCV32_RV32M1_BASE_ADDR then).
RISCV_RV32M1_VECTOR_SIZE is still used, but is always 0x100, so remove
it too.
These symbols were only defined in a Kconfig.defconfig file.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
USE_CODE_PARTITION is a bit vague as a symbol name ("use code partition
how?"). Rename it to USE_DT_CODE_PARTITION to make it clearer that it's
about devicetree.
This would break any third-party configuration files that set it, but
it'll generate an error since kconfig.py promotes warnings to errors, so
it's probably not a big deal.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Move _LINKER and _ASMLANGUAGE to target.cmake because of how we pick the
linker script that might be used. This way regardless of how or where a
linker.ld gets included we will always set _LINKER & _ASMLANGUAGE (so
any header that needs check based on those defines they can,
specifically generated_dts_board.h)
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Include .gcc_except_table (sub-)sections in linker files to support C++
with exceptions enabled. If these sections are not mapped warnings will
be generated for orphaned sections at link time.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
With the upcoming riscv64 support, it is best to use "riscv" as the
subdirectory name and common symbols as riscv32 and riscv64 support
code is almost identical. Then later decide whether 32-bit or 64-bit
compilation is wanted.
Redirects for the web documentation are also included.
Then zephyrbot complained about this:
"
New files added that are not covered in CODEOWNERS:
dts/riscv/microsemi-miv.dtsi
dts/riscv/riscv32-fe310.dtsi
Please add one or more entries in the CODEOWNERS file to cover
those files
"
So I assigned them to those who created them. Feel free to readjust
as necessary.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
2019-08-02 13:54:48 -07:00
Renamed from soc/riscv32/openisa_rv32m1/linker.ld (Browse further)
