This adds CONFIG_EXECUTE_XOR_WRITE, which is enabled by default on
systems that support controlling whether a page can contain executable
code. This is also known as W^X[1].
Trying to add a memory domain with a page that is both executable and
writable, either for supervisor mode threads, or for user mode threads,
will result in a kernel panic.
There are few cases where a writable page should also be executable
(JIT compilers, which are most likely out of scope for Zephyr), so an
option is provided to disable the check.
Since the memory domain APIs are executed in supervisor mode, a
determined person could bypass these checks with ease. This is seen
more as a way to avoid people shooting themselves in the foot.
[1] https://en.wikipedia.org/wiki/W%5EX
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
This should clear up some of the confusion with random number
generators and drivers that obtain entropy from the hardware. Also,
many hardware number generators have limited bandwidth, so it's natural
for their output to be only used for seeding a random number generator.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Some "random" drivers are not drivers at all: they just implement the
function `sys_rand32_get()`. Move those to a random subsystem in
preparation for a reorganization.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Use-cases for these subsystems appear to be limited to board/SOC
code, network stacks, or other drivers, no need to expose to
userspace at this time. If we change our minds it's easy enough
to add them back.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Intention of CONFIG_BOOT_DELAY is to delay booting of system for certain
time. Currently it is only delaying start of _main thread as delay is
created using k_sleep. This leads to putting _main thread into timeout
queue and continue kernel boot. This is causing some of undesirable
effects in some of test Automation usecase.
This patch changes k_sleep to k_busy_wait which result in delay in OS
boot instead of delaying start of _main.
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Fix init_group bit clearing in _k_thread_group_leave()
Fix _k_object_uninit calling order. Though the order won't
make much difference in this case it is always good to destroy
or uninitialize in the reverse order of the object creation or
initialization.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Added arch specific calls to handle memory domain destroy
and removal of partition.
GH-3852
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Additional arch specific interfaces to handle memory domain
destroy and single partition removal.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Most calls to device_get_binding() will pass named constants generated
by Kconfig; these constants will all point to the same place, so
compare the pointer before attempting to match the whole string.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
When k_poll is being used k_queue_cancel_wait shall mark the state as
K_POLL_STATE_NOT_READY so other threads will get properly notified with
a NULL pointer return.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In case _handle_obj_poll_events is called with K_POLL_STATE_NOT_READY
set -EINTR as return to the poller thread.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
k_queue_get shall never return NULL when timeout is K_FOREVER which can
happen when a higher priority thread cancel/take an item before the
waiting thread.
Fixes issue #4358
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This is a runtime counterpart to K_THREAD_ACCESS_GRANT().
This function takes a thread and a NULL-terminated list of kernel
objects and runs k_object_access_grant() on each of them.
This function doesn't require any special permissions and doesn't
need to become a system call.
__attribute__((sentinel)) added to warn users if they omit the
required NULL termination.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
It's possible to declare static threads that start up as K_USER,
but these threads can't do much since they start with permissions on
no kernel objects other than their own thread object.
Rather than do some run-time synchronization to have some other thread
grant the necessary permissions, we introduce macros
to conveniently assign object permissions to these threads when they
are brought up at boot by the kernel. The tables generated here
are constant and live in ROM when possible.
Example usage:
K_THREAD_DEFINE(my_thread, STACK_SIZE, my_thread_entry,
NULL, NULL, NULL, 0, K_USER, K_NO_WAIT);
K_THREAD_ACCESS_GRANT(my_thread, &my_sem, &my_mutex, &my_pipe);
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Currently this is defined as a k_thread_stack_t pointer.
However this isn't correct, stacks are defined as arrays. Extern
references to k_thread_stack_t doesn't work properly as the compiler
treats it as a pointer to the stack array and not the array itself.
Declaring as an unsized array of k_thread_stack_t doesn't work
well either. The least amount of confusion is to leave out the
pointer/array status completely, use pointers for function prototypes,
and define K_THREAD_STACK_EXTERN() to properly create an extern
reference.
The definitions for all functions and struct that use
k_thread_stack_t need to be updated, but code that uses them should
be unchanged.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
All sys_slist_*() functions aren't threadsafe and calls to them
must be protected with irq_lock. This is usually done in a wider
caller context, but k_queue_poll() is called with irq_lock already
relinquished, and is thus subject to hard to detect and explain
race conditions, as e.g. was tracked in #4022.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
User threads can only create other nonessential user threads
of equal or lower priority and must have access to the entire
stack area.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We need to track permission on stack memory regions like we do
with other kernel objects. We want stacks to live in a memory
area that is outside the scope of memory domain permission
management. We need to be able track what stacks are in use,
and what stacks may be used by user threads trying to call
k_thread_create().
Some special handling is needed because thread stacks appear as
variously-sized arrays of struct _k_thread_stack_element which is
just a char. We need the entire array to be considered an object,
but also properly handle arrays of stacks.
Validation of stacks also requires that the bounds of the stack
are not exceeded. Various approaches were considered. Storing
the size in some header region of the stack itself would not allow
the stack to live in 'noinit'. Having a stack object be a data
structure that points to the stack buffer would confound our
current APIs for declaring stacks as arrays or struct members.
In the end, the struct _k_object was extended to store this size.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We also need macros to assert that an object must be in an
uninitialized state. This will be used for validating thread
and stack objects to k_thread_create(), which must not be already
in use.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is too powerful for user mode, the other access APIs
require explicit permissions on the threads that are being
granted access.
The API is no longer exposed as a system call and hence will
only be usable by supervisor threads.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
It's currently too easy to run out of thread IDs as they
are never re-used on thread exit.
Now the kernel maintains a bitfield of in-use thread IDs,
updated on thread creation and termination. When a thread
exits, the permission bitfield for all kernel objects is
updated to revoke access for that retired thread ID, so that
a new thread re-using that ID will not gain access to objects
that it should not have.
Because of these runtime updates, setting the permission
bitmap for an object to all ones for a "public" object doesn't
work properly any more; a flag is now set for this instead.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We got rid of letting uninitialized objects being a free-for-all
and permission to do stuff on an object is now done explicitly.
If a user thread is initializing an object, they will already have
permission on it.
If a supervisor thread is initializing an object, that supervisor
thread may or may not want that object added to its set of object
permissions for purposes of permission inheritance or dropping to
user mode.
Resetting all permissions on initialization makes objects much
harder to share and re-use; for example other threads will lose
access if some thread re-inits a shared semaphore.
For all these reasons, just keep the permissions as they are when
an object is initialized.
We will need some policy for permission reset when objects are
requested and released from pools, but the pool implementation
should take care of that.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This will allow these thread objects to be re-used.
_mark_thread_as_dead() removed, it was only being called in one
place.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
API to assist with re-using objects, such as terminated threads or
kernel objects returned to a pool.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Use some preprocessor trickery to automatically deduce the amount of
arguments for the various _SYSCALL_HANDLERn() macros. Makes the grunt
work of converting a bunch of kernel APIs to system calls slightly
easier.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Does the opposite of k_object_access_grant(); the provided thread will
lose access to that kernel object.
If invoked from userspace the caller must hace sufficient access
to that object and permission on the thread being revoked access.
Fix documentation for k_object_access_grant() API to reflect that
permission on the thread parameter is needed as well.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
By default, threads are created only having access to their own thread
object and nothing else. This new flag to k_thread_create() gives the
thread access to all objects that the parent had at the time it was
created, with the exception of the parent thread itself.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
User threads aren't trusted and shouldn't be able to alter the
scheduling assumptions of the system by making thread priorities more
favorable.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We now have macros which should significantly reduce the amount of
boilerplate involved with defining system call handlers.
- Macros which define the proper prototype based on number of arguments
- "SIMPLE" variants which create handlers that don't need anything
other than object verification
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
- Dumping error messages split from _k_object_validate(), to avoid spam
in test cases that are expected to have failure result.
- _k_object_find() prototype moved to syscall_handler.h
- Clean up k_object_access() implementation to avoid double object
lookup and use single validation function
- Added comments, minor whitespace changes
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Computing the total size of the array need to handle the case where
the product overflow a 32-bit unsigned integer.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Use new _SYSCALL_OBJ/_SYSCALL_OBJ_INIT macros.
Use new _SYSCALL_MEMORY_READ/_SYSCALL_MEMORY_WRITE macros.
Some non-obvious checks changed to use _SYSCALL_VERIFY_MSG.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Instead of boolean arguments to indicate memory read/write
permissions, or init/non-init APIs, new macros are introduced
which bake the semantics directly into the name of the macro.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Expecting stringified expressions to be completely comprehensible to end
users is wishful thinking; we really need to express what a failed
system call verification step means in human terms in most cases.
Memory buffer and kernel object checks now are implemented in terms of
_SYSCALL_VERIFY_MSG.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This API only gets used inside system call handlers and a specific test
case dedicated to it. Move definition to the private kernel header along
with the rest of the defines for system call handlers.
A non-userspace inline variant of this function is unnecessary and has
been deleted.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The old policy was that objects that are not marked as initialized may
be claimed by any thread, user or kernel.
This has some undesirable implications:
- Kernel objects that were initailized at build time via some
_<object name>_INITIALIZER macro, not intended for userspace to ever
use, could be 'stolen' if their memory addresses were figured out and
_k_object_init() was never called on them.
- In general, a malicious thread could initialize all unclaimed objects
it could find, resulting in denial of service for the threads that
these objects were intended for.
Now, performing any operation in user mode on a kernel object,
initialized or not, required that the calling user thread have
permission on it. Such permission would have to be explicitly granted or
inherited from a supervisor thread, as with this change only supervisor
thread will be able to claim uninitialized objects in this way.
If an uninitialized kernel object has permissions granted to multiple
threads, whatever thread actually initializes the object will reset all
permission bits to zero and grant only the calling thread access to that
object.
In other words, granting access to an uninitialized object to several
threads means that "whichever of these threads (or any kernel thread)
who actually initializes this object will obtain exclusive access to
that object, which it then may grant to other threads as it sees fit."
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We now show the caller's thread ID and dump out the permissions array
for the object that failed the check.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This API has a return value which was not being propagated back to the
caller if invoked as a system call.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
These are removed as the APIs that use them are not suitable for
exporting to userspace.
- Kernel workqueues run in supervisor mode, so it would not be
appropriate to allow user threads to submit work to them. A future
enhancement may extend or introduce parallel API where the workqueue
threads may run in user mode (or leave as an exercise to the user).
- Kernel slabs store private bookkeeping data inside the
user-accessible slab buffers themselves. Alternate APIs are planned
here for managing slabs of kernel objects, implemented within the
runtime library and not the kernel.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
k_pipe_block_put() will be done in another patch, we need to design
handling for the k_mem_block object.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
These modify kernel object metadata and are intended to be callable from
user threads, need a privilege elevation for these to work.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We want applications to be able to enable and disable userspace without
changing any code. k_thread_user_mode_enter() now just jumps into the
entry point if CONFIG_USERSPACE is disabled.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add the following application-facing memory domain APIs:
k_mem_domain_init() - to initialize a memory domain
k_mem_domain_destroy() - to destroy a memory domain
k_mem_domain_add_partition() - to add a partition into a domain
k_mem_domain_remove_partition() - to remove a partition from a domain
k_mem_domain_add_thread() - to add a thread into a domain
k_mem_domain_remove_thread() - to remove a thread from a domain
A memory domain would contain some number of memory partitions.
A memory partition is a memory region (might be RAM, peripheral
registers, flash...) with specific attributes (access permission,
e.g. privileged read/write, unprivileged read-only, execute never...).
Memory partitions would be defined by set of MPU regions or MMU tables
underneath.
A thread could only belong to a single memory domain any point in time
but a memory domain could contain multiple threads.
Threads in the same memory domain would have the same access permission
to the memory partitions belong to the memory domain.
The memory domain APIs are used by unprivileged threads to share data
to the threads in the same memory and protect sensitive data from
threads outside their domain. It is not only for improving the security
but also useful for debugging (unexpected access would cause exception).
Jira: ZEP-2281
Signed-off-by: Chunlin Han <chunlin.han@linaro.org>
Everything get passed to handlers as u32_t, make it simpler to check
something that is known to be a pointer, like we already do with
_SYSCALL_IS_OBJ().
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Device drivers need to be treated like other kernel objects, with
thread-level permissions and validation of struct device pointers passed
in from userspace when making API calls.
However it's not sufficient to identify an object as a driver, we need
to know what subsystem it belongs to (if any) so that userspace cannot,
for example, make Ethernet driver API calls using a UART driver object.
Upon encountering a variable representing a device struct, we look at
the value of its driver_api member. If that corresponds to an instance
of a driver API struct belonging to a known subsystem, the proper
K_OBJ_DRIVER_* enumeration type will be associated with this device in
the generated gperf table.
If there is no API struct or it doesn't correspond to a known subsystem,
the device is omitted from the table; it's presumably used internally
by the kernel or is a singleton with specific APIs for it that do not
take a struct device parameter.
The list of kobjects and subsystems in the script is simplified since
the enumeration type name is strongly derived from the name of the data
structure.
A device object is marked as initialized after its init function has
been run at boot.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
To define a system call, it's now sufficient to simply tag the inline
prototype with "__syscall" or "__syscall_inline" and include a special
generated header at the end of the header file.
The system call dispatch table and enumeration of system call IDs is now
automatically generated.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
- syscall.h now contains those APIs needed to support invoking calls
from user code. Some stuff moved out of main kernel.h.
- syscall_handler.h now contains directives useful for implementing
system call handler functions. This header is not pulled in by
kernel.h and is intended to be used by C files implementing kernel
system calls and driver subsystem APIs.
- syscall_list.h now contains the #defines for system call IDs. This
list is expected to grow quite large so it is put in its own header.
This is now an enumerated type instead of defines to make things
easier as we introduce system calls over the new few months. In the
fullness of time when we desire to have a fixed userspace/kernel ABI,
this can always be converted to defines.
Some new code added:
- _SYSCALL_MEMORY() macro added to check memory regions passed up from
userspace in handler functions
- _syscall_invoke{7...10}() inline functions declare for invoking system
calls with more than 6 arguments. 10 was chosen as the limit as that
corresponds to the largest arg list we currently have
which is for k_thread_create()
Other changes
- auto-generated K_SYSCALL_DECLARE* macros documented
- _k_syscall_table in userspace.c is not a placeholder. There's no
strong need to generate it and doing so would require the introduction
of a third build phase.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
A quick look at "man syscall" shows that in Linux, all architectures
support at least 6 argument system calls, with a few supporting 7. We
can at least do 6 in Zephyr.
x86 port modified to use EBP register to carry the 6th system call
argument.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
* Instead of a common system call entry function, we instead create a
table mapping system call ids to handler skeleton functions which are
invoked directly by the architecture code which receives the system
call.
* system call handler prototype specified. All but the most trivial
system calls will implement one of these. They validate all the
arguments, including verifying kernel/device object pointers, ensuring
that the calling thread has appropriate access to any memory buffers
passed in, and performing other parameter checks that the base system
call implementation does not check, or only checks with __ASSERT().
It's only possible to install a system call implementation directly
inside this table if the implementation has a return value and requires
no validation of any of its arguments.
A sample handler implementation for k_mutex_unlock() might look like:
u32_t _syscall_k_mutex_unlock(u32_t mutex_arg, u32_t arg2, u32_t arg3,
u32_t arg4, u32_t arg5, void *ssf)
{
struct k_mutex *mutex = (struct k_mutex *)mutex_arg;
_SYSCALL_ARG1;
_SYSCALL_IS_OBJ(mutex, K_OBJ_MUTEX, 0, ssf);
_SYSCALL_VERIFY(mutex->lock_count > 0, ssf);
_SYSCALL_VERIFY(mutex->owner == _current, ssf);
k_mutex_unlock(mutex);
return 0;
}
* the x86 port modified to work with the system call table instead of
calling a common handler function. fixed an issue where registers being
changed could confuse the compiler has been fixed; all registers, even
ones used for parameters, must be preserved across the system call.
* a new arch API for producing a kernel oops when validating system call
arguments added. The debug information reported will be from the system
call site and not inside the handler function.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Based on work by Chunlin Han <chunlin.han@linaro.org>.
This defines the interfaces that architectures will need to implement in
order to support memory domains in either MMU or MPU hardware.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Now creating a thread will assign it a unique, monotonically increasing
id which is used to reference the permission bitfield in the kernel
object metadata.
Stub functions in userspace.c now implemented.
_new_thread is now wrapped in a common function with pre- and post-
architecture thread initialization tasks.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We already check the stack sentinel for outgoing thread when we _Swap,
just leverage that.
The thread state check in _check_stack_sentinel now only exits if the
current thread is a dummy thread.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Thread may be in user mode when it returns and can't look at
_current. Use k_current_get() which will be a system call.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This will be used by system call handlers to ensure that any memory
regions passed in from userspace are actually accessible by the calling
thread.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
In various places, a private _thread_entry_t, or the full prototype
were being used. Be consistent and use the same typedef everywhere.
Signen-off-by: Andrew Boie <andrew.p.boie@intel.com>
Previously, this was only done if an essential thread self-exited,
and was a runtime check that generated a kernel panic.
Now if any thread has k_thread_abort() called on it, and that thread
is essential to the system operation, this check is made. It is now
an assertion.
_NANO_ERR_INVALID_TASK_EXIT checks and printouts removed since this
is now an assertion.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
It's now possible to instantiate a thread object, but delay its
execution indefinitely. This was already supported with K_THREAD_DEFINE.
A new API, k_thread_start(), now exists to start threads that are in
this state.
The intended use-case is to initialize a thread with K_USER, then grant
it various access permissions, and only then start it.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Garbage values here could wreak havoc on the initial switch to main
depending on how arch-specific _Swap() manages memory permissions when
switching threads.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
All system calls made from userspace which involve pointers to kernel
objects (including device drivers) will need to have those pointers
validated; userspace should never be able to crash the kernel by passing
it garbage.
The actual validation with _k_object_validate() will be in the system
call receiver code, which doesn't exist yet.
- CONFIG_USERSPACE introduced. We are somewhat far away from having an
end-to-end implementation, but at least need a Kconfig symbol to
guard the incoming code with. Formal documentation doesn't exist yet
either, but will appear later down the road once the implementation is
mostly finalized.
- In the memory region for RAM, the data section has been moved last,
past bss and noinit. This ensures that inserting generated tables
with addresses of kernel objects does not change the addresses of
those objects (which would make the table invalid)
- The DWARF debug information in the generated ELF binary is parsed to
fetch the locations of all kernel objects and pass this to gperf to
create a perfect hash table of their memory addresses.
- The generated gperf code doesn't know that we are exclusively working
with memory addresses and uses memory inefficently. A post-processing
script process_gperf.py adjusts the generated code before it is
compiled to work with pointer values directly and not strings
containing them.
- _k_object_init() calls inserted into the init functions for the set of
kernel object types we are going to support so far
Issue: ZEP-2187
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Fixes https://github.com/zephyrproject-rtos/zephyr/issues/1280, but
also many other failures, where output was garbled due to this. Other
similarly affected issues are missing first benchmark (context) in
latency benchmark and some net tests.
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
k_timer_start(timer, duration, period) is API used to
start a timer. Currently duration parameters accepts
only positive number.
But a user may require to do some periodic activity
ASAP and start timer with 0 value. So this patch
allows 0 as minimum value of duration.
In this patch, when duration value is set as 0 then
timer expiration handler is called instead of submiting
this into timeout queue.
Jira: ZEP-2497
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
The API/Variable names in timing_info looks very speicific to
platform (like systick etc), whereas these variabled are used
across platforms (nrf/arm/quark).
So this patch :-
1. changing API/Variable names to generic one.
2. Creating some of Macros whose implimentation is platform
depenent.
Jira: ZEP-2314
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
SYS_DLIST_FOR_EACH_CONTAINER is preferable over using
SYS_DLIST_FOR_EACH_NODE as that avoid casting directly which assumes the
node field is always at the beginning.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This is necessary in order for k_queue_get to work properly since that
is used with buffer pools which might be used by multiple threads asking
for buffers.
Jira: ZEP-2553
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The boot banner is being printed after static threads have started, for
example this is visible with tests using ztest.
This puts the banner message before starting any threads.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Partial implementation of the IEEE 1003.1 pthread API, including
mutexes and condition variables in their default behaviors, and
pthread barrier objects. The rwlock and spinlocks abstractions are
not supported in this commit (both only make sense in the presence of
multiple SMP processors).
Note that this is the IPC mechanisms only. The thread creation API
itself is unsupported: Zephyr threads work differently from pthreads
and don't port cleanly in all cases. Likewise the "_INITIALIZER"
macros from pthreads don't work cleanly here, and _DECLARE macros have
been provided to statically initialize pthread primitives in a manner
more native to Zephyr
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This has been a limitation caused by k_fifo which could only remove
items from the beggining, but with the change to use k_queue in
k_work_q it is now possible to remove items from any position with
use of k_queue_remove.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes use of POLL_EVENT in case k_poll is enabled which is
preferable over wait_q as that allows objects to be removed for the
data_q at any time.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Save some memory for small memory systems when running ztests. We have
our own stack in ztest so we should be able to get away reducing down
the main stack.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
* add nested interrupt support for interrupts
+ use a varibale exc_nest_count to trace nest interrupt and exception
+ regular interrupts can be nested by regular interrupts and fast
interrupts
+ fast interrupt's priority is the highest, cannot be nested
* remove the firq stack and exception stack
+ remove the coressponding kconfig option
+ all interrupts (normal and fast) and exceptions will be handled
in the same stack (_interrupt stack)
+ the pros are, smaller memory footprint (no firq stack), simpler
stack management, simpler codes, etc.. The cons are, possible
10-15 instructions overhead for the case where fast irq nests
regular irq
* add the case of ARC in test/kernel/gen_isr_table
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
If there are multiple preemptive threads with same priority, and any
one thread preempts before its time slice expires (due to yields/
semaphore take/queue etc), then next schedules thread is getting
lower time slide than expected.
This patch fixes this issue by accounting time expired when a thread
releases CPU before its time slide expires.
Jira: ZEP-2217/ZEP-2218
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
Historically, stacks were just character buffers and could be treated
as such if the user wanted to look inside the stack data, and also
declared as an array of the desired stack size.
This is no longer the case. Certain architectures will create a memory
region much larger to account for MPU/MMU guard pages. Unfortunately,
the kernel interfaces treat both the declared stack, and the valid
stack buffer within it as the same char * data type, even though these
absolutely cannot be used interchangeably.
We introduce an opaque k_thread_stack_t which gets instantiated by
K_THREAD_STACK_DECLARE(), this is no longer treated by the compiler
as a character pointer, even though it really is.
To access the real stack buffer within, the result of
K_THREAD_STACK_BUFFER() can be used, which will return a char * type.
This should catch a bunch of programming mistakes at build time:
- Declaring a character array outside of K_THREAD_STACK_DECLARE() and
passing it to K_THREAD_CREATE
- Directly examining the stack created by K_THREAD_STACK_DECLARE()
which is not actually the memory desired and may trigger a CPU
exception
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This test was just wrong. If the current thread did not race with any
others during the allocation process, then the result will be false
because it was detected so earlier in the function. If we did race,
then sure: it might be true now if someone snuck in and freed a block.
But so what? We already have the block we want to break. The
behavior in the code as written was to early-exit from the break loop,
returning a buffer that was larger than the one requested (though
otherwise benign -- we wouldn't leak, just waste memory). No idea
what I was thinking.
Thanks to Du Quanwen for the diagnosis.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Subsequent patches will set this guard page as unmapped,
triggering a page fault on access. If this is due to
stack overflow, a double fault will be triggered,
which we are now capable of handling with a switch to
a know good stack.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Adds common and Kinetis-specific adc device tree properties, and updates
all Kinetis SoC and board dts files to include adc nodes.
Jira: ZEP-1396
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Introduce a configurable boot delay option (defaulting to none) that
happens right after printing a boot delay banner, #before calling
main() in kernel/init.c:_main(), before taking timestamps for _main()
and once all the infrastructure is in place. Move also the boot banner
to happen after this delay.
The rationale for this is some boards will boot really fast and print
out some test case output in the serial port before the system that is
monitoring the serial port is able to read from the serial port.
This happens in MCUs whose serial port is embedded in a USB connection
which also is used to power the MCU board. When powering it on by
powering the USB port, there is a time it takes the host system to
detect the USB connection, enumerate the serial port, configure it and
load, start and read from the serial port. At this time, it might have
printed the output of the serial port.
While manually it is possible to press a reset button, on automation
setups this adds a lot of overhead and cabling or modifications to the
MCU that are easier (and cheaper) to overcome with this delay. Other
options (like using a separate serial line) might not be possible or
add a lot of cabling and cost, plus it'd also add extra build
configuration.
Change-Id: I2f4d1ba356de6cefa19b4ef5c9f19f87885d4dfd
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Commit 1bc2fdc70 ("dts: arm: STM32 boards use DT to configure I2C")
added a new Kconfig option, HAS_DTS_I2C, which should be set when the
target supports configuration of I2C peripherals via Device Tree.
Currently, STM32 targets select this. However, the fact that
HAS_DTS_I2C has no default is causing prompting when building Zephyr
on other targets with DTS. To avoid this and allow builds to complete
as usual, have HAS_DTS_I2C default to n.
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
Upcoming memory protection features will be placing some additional
constraints on kernel objects:
- They need to reside in memory owned by the kernel and not the
application
- Certain kernel object validation schemes will require some run-time
initialization of all kernel objects before they can be used.
Per Ben these initializer macros were never intended to be public. It is
not forbidden to use them, but doing so requires care: the memory being
initialized must reside in kernel space, and extra runtime
initialization steps may need to be peformed before they are fully
usable as kernel objects. In particular, kernel subsystems or drivers
whose objects are already in kernel memory may still need to use these
macros if they define kernel objects as members of a larger data
structure.
It is intended that application developers instead use the
K_<object>_DEFINE macros, which will automatically put the object in the
right memory and add them to a section which can be iterated over at
boot to complete initiailization.
There was no K_WORK_DEFINE() macro for creating struct k_work objects,
this is now added.
k_poll_event and k_poll_signal are intended to be instatiated from
application memory and have not been changed.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Configure I2C using DT for the following STM32 boards:
disco_l475_iot1
nucleo_f401re
96b_carbon
olimexino_stm32
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
Applications will have their own BSS and data sections which
will need to be additionally copied.
This covers the common C implementation of these functions.
Arches which implement their own optimized versions will need
to be updated.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
1. Changed _tsc_read() to k_cycles_get_32(). Thus reading the
time stamp will be agnostic of the architecutre used.
2. Changed the variable names from *_tsc to *_time_stamp.
JIRA: ZEP-1426
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
The existing __stack decorator is not flexible enough for upcoming
thread stack memory protection scenarios. Wrap the entire thing in
a declaration macro abstraction instead, which can be implemented
on a per-arch or per-SOC basis.
Issue: ZEP-2185
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
One of the stack sentinel policies was to check the sentinel
any time a cooperative context switch is done (i.e, _Swap is
called).
This was done by adding a hook to _check_stack_sentinel in
every arch's __swap function.
This way is cleaner as we just have the hook in one inline
function rather than implemented in several different assembly
dialects.
The check upon interrupt is now made unconditionally rather
than checking if we are calling __swap, since the check now
is only called on cooperative _Swap(). The interrupt is always
serviced first.
Issue: ZEP-2244
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The kernel tracks time slice usage with the _time_slice_elapsed global.
Every time the timer interrupt goes off and the timer driver calls
_nano_sys_clock_tick_announce() with the elapsed time, this is added to
_time_slice_elapsed. If it exceeds the total time slice, the thread is
moved to the back of the queue for that priority level and
_time_slice_elapsed is reset to zero.
In a non-tickless kernel, this is the only time _time_slice_elapsed is
reset. If a thread uses up a partial time slice, and then cooperatively
switches to another thread, the next thread will inherit the remaining
time slice, causing it not to be able to run as long as it ought to.
There does exist code to properly reset the elapsed count, but it was
only compiled in a tickless kernel. Now it is built any time
CONFIG_TIMESLICING is enabled.
Issue: ZEP-2107
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Fixes sparse warning:
<snip>/zephyr/kernel/sched.c:368:6: warning: symbol '_dump_ready_q' was not declared. Should it be static?
Change-Id: I156e89f1d74178bbd99cc25e532da544c7ebee60
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
Fixes sparse warnings:
<snip>/zephyr/kernel/timer.c:15:16: warning: symbol '_trace_list_k_timer' was not declared. Should it be static?
<snip>/zephyr/kernel/sem.c:32:14: warning: symbol'_trace_list_k_sem' was not declared. Should it be static?
<snip>/zephyr/kernel/stack.c:24:16: warning: symbol '_trace_list_k_stack' was not declared. Should it be static?
<snip>/zephyr/kernel/queue.c:27:16: warning: symbol '_trace_list_k_queue' was not declared. Should it be static?
<snip>/zephyr/kernel/pipes.c:40:15: warning: symbol '_trace_list_k_pipe' was not declared. Should it be static?
<snip>/zephyr/kernel/mutex.c:46:16: warning: symbol '_trace_list_k_mutex' was not declared. Should it be static?
<snip>/zephyr/kernel/msg_q.c:26:15: warning: symbol '_trace_list_k_msgq' was not declared. Should it be static?
<snip>/zephyr/kernel/mem_slab.c:20:19: warning: symbol '_trace_list_k_mem_slab' was not declared. Should it be static?
<snip>/zephyr/kernel/mailbox.c:53:15: warning: symbol '_trace_list_k_mbox' was not declared. Should it be static?
Change-Id: I42d55aea9855b9c1dd560852ca033c9a19f1ac21
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
Fixes sparse warning:
CHECK <snip>/zephyr/kernel/thread.c
<snip>/zephyr/kernel/thread.c:184:20: error: symbol '_thread_entry' redeclared with different type (originally declared at <snip>/zephyr/kernel/include/nano_internal.h:43) - different modifiers
CC kernel/thread.o
Change-Id: I2223493cdf97c811c661773f8fd430e6c00cbaa0
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
This places a sentinel value at the lowest 4 bytes of a stack
memory region and checks it at various intervals, including when
servicing interrupts or context switching.
This is implemented on all arches except ARC, which supports stack
bounds checking directly in hardware.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The initial dummy thread context used for the initial __swap to
the main thread at early kernel initialization was not marked as a dummy
thread as it ought to be.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This patch amounts to a mostly complete rewrite of the k_mem_pool
allocator, which had been the source of historical complaints vs. the
one easily available in newlib. The basic design of the allocator is
unchanged (it's still a 4-way buddy allocator), but the implementation
has made different choices throughout. Major changes:
Space efficiency: The old implementation required ~2.66 bytes per
"smallest block" in overhead, plus 16 bytes per log4 "level" of the
allocation tree, plus a global tracking struct of 32 bytes and a very
surprising 12 byte overhead (in struct k_mem_block) per active
allocation on top of the returned data pointer. This new allocator
uses a simple bit array as the only per-block storage and places the
free list into the freed blocks themselves, requiring only ~1.33 bits
per smallest block, 12 bytes per level, 32 byte globally and only 4
bytes of per-allocation bookeeping. And it puts more of the generated
tree into BSS, slightly reducing binary sizes for non-trivial pool
sizes (even as the code size itself has increased a tiny bit).
IRQ safe: atomic operations on the store have been cut down to be at
most "4 bit sets and dlist operations" (i.e. a few dozen
instructions), reducing latency significantly and allowing us to lock
against interrupts cleanly from all APIs. Allocations and frees can
be done from ISRs now without limitation (well, obviously you can't
sleep, so "timeout" must be K_NO_WAIT).
Deterministic performance: there is no more "defragmentation" step
that must be manually managed. Block coalescing is done synchronously
at free time and takes constant time (strictly log4(num_levels)), as
the detection of four free "partner bits" is just a simple shift and
mask operation.
Cleaner behavior with odd sizes. The old code assumed that the
specified maximum size would be a power of four multiple of the
minimum size, making use of non-standard buffer sizes problematic.
This implementation re-aligns the sub-blocks at each level and can
handle situations wehre alignment restrictions mean fewer than 4x will
be available. If you want precise layout control, you can still
specify the sizes rigorously. It just doesn't break if you don't.
More portable: the original implementation made use of GNU assembler
macros embedded inline within C __asm__ statements. Not all
toolchains are actually backed by a GNU assembler even when the
support the GNU assembly syntax. This is pure C, albeit with some
hairy macros to expand the compile-time-computed values.
Related changes that had to be rolled into this patch for bisectability:
* The new allocator has a firm minimum block size of 8 bytes (to store
the dlist_node_t). It will "work" with smaller requested min_size
values, but obviously makes no firm promises about layout or how
many will be available. Unfortunately many of the tests were
written with very small 4-byte minimum sizes and to assume exactly
how many they could allocate. Bump the sizes to match the allocator
minimum.
* The mbox and pipes API made use of the internals of k_mem_block and
had to be ported to the new scheme. Blocks no longer store a
backpointer to the pool that allocated them (it's an integer ID in a
bitfield) , so if you want to "nullify" them you have to use the
data pointer.
* test_mbox_api had a bug were it was prematurely freeing k_mem_blocks
that it sent through the mailbox. This worked in the old allocator
because the memory wouldn't be touched when freed, but now we stuff
list pointers in there and the bug was exposed.
* Remove test_mpool_options: the options (related to defragmentation
behavior) tested no longer exist.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Unline k_thread_spawn(), the struct k_thread can live anywhere and not
in the thread's stack region. This will be useful for memory protection
scenarios where private kernel structures for a thread are not
accessible by that thread, or we want to allow the thread to use all the
stack space we gave it.
This requires a change to the internal _new_thread() API as we need to
provide a separate pointer for the k_thread.
By default, we still create internal threads with the k_thread in stack
memory. Forthcoming patches will change this, but we first need to make
it easier to define k_thread memory of variable size depending on
whether we need to store coprocessor state or not.
Change-Id: I533bbcf317833ba67a771b356b6bbc6596bf60f5
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Newlib names this function __errno(), so if we want Zephyr to work
with Newlib seamlessly, it's better to just follow Newlib's naming
convention for Zephyr's own minimal libc.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Currently, a queue/fifo getter chooses how long to wait for an
element. But there are scenarios when putter would know better,
there should be a way to expire getter's timeout to make it run
again. k_queue_cancel_wait() and k_fifo_cancel_wait() functions
do just that. They cause corresponding *_get() functions to return
with NULL value, as if timeout expired on getter's side (even
K_FOREVER).
This can be used to signal out of band conditions from putter to
getter, e.g. end of processing, error, configuration change, etc.
A specific event would be communicated to getter by other means
(e.g. using existing shared context structures).
Without this call, achieving the same effect would require e.g.
calling k_fifo_put() with a pointer to a special sentinal memory
structure - such structure would need to be allocated somewhere
and somehow, and getter would need to recognize it from a normal
data item. Having cancel_wait() functions offers an elegant
alternative. From this perspective, these calls can be seen as
an equivalent to e.g. k_fifo_put(fifo, NULL), except that such
call won't work in practice.
Change-Id: I47b7f690dc325a80943082bcf5345c41649e7024
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
fix misspelling in Kconfig files that would show up in configuration
documentation and screens.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Adds event based scheduling logic to the kernel. Updates
management of timeouts, timers, idling etc. based on
time tracked at events rather than periodic ticks. Provides
interfaces for timers to announce and get next timer expiry
based on kernel scheduling decisions involving time slicing
of threads, timeouts and idling. Uses wall time units instead
of ticks in all scheduling activities.
The implementation involves changes in the following areas
1. Management of time in wall units like ms/us instead of ticks
The existing implementation already had an option to configure
number of ticks in a second. The new implementation builds on
top of that feature and provides option to set the size of the
scheduling granurality to mili seconds or micro seconds. This
allows most of the current implementation to be reused. Due to
this re-use and co-existence with tick based kernel, the names
of variables may contain the word "tick". However, in the
tickless kernel implementation, it represents the currently
configured time unit, which would be be mili seconds or
micro seconds. The APIs that take time as a parameter are not
impacted and they continue to pass time in mili seconds.
2. Timers would not be programmed in periodic mode
generating ticks. Instead they would be programmed in one
shot mode to generate events at the time the kernel scheduler
needs to gain control for its scheduling activities like
timers, timeouts, time slicing, idling etc.
3. The scheduler provides interfaces that the timer drivers
use to announce elapsed time and get the next time the scheduler
needs a timer event. It is possible that the scheduler may not
need another timer event, in which case the system would wait
for a non-timer event to wake it up if it is idling.
4. New APIs are defined to be implemented by timer drivers. Also
they need to handler timer events differently. These changes
have been done in the HPET timer driver. In future other timers
that support tickles kernel should implement these APIs as well.
These APIs are to re-program the timer, update and announce
elapsed time.
5. Philosopher and timer_api applications have been enabled to
test tickless kernel. Separate configuration files are created
which define the necessary CONFIG flags. Run these apps using
following command
make pristine && make BOARD=qemu_x86 CONF_FILE=prj_tickless.conf qemu
Jira: ZEP-339 ZEP-1946 ZEP-948
Change-Id: I7d950c31bf1ff929a9066fad42c2f0559a2e5983
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Future tickless kernel patches would be inserting some
code before call to Swap. To enable this it will create
a mcro named as the current _Swap which would call first
the tickless kernel code and then call the real __swap()
Jira: ZEP-339
Change-Id: Id778bfcee4f88982c958fcf22d7f04deb4bd572f
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Historically, space for struct k_thread was always carved out of the
thread's stack region. However, we want more control on where this data
will reside; in memory protection scenarios the stack may only be used
for actual stack data and nothing else.
On some platforms (particularly ARM), including kernel_arch_data.h from
the toplevel kernel.h exposes intractable circular dependency issues.
We create a new per-arch header "kernel_arch_thread.h" with very limited
scope; it only defines the three data structures necessary to instantiate
the arch-specific bits of a struct k_thread.
Change-Id: I3a55b4ed4270512e58cf671f327bb033ad7f4a4f
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This patck adds the stack information into the k_thread data structure.
The information will be set by when creating a new thread (_new_thread)
and will be used by the scheduling process.
Change-Id: Ibe79fe92a9ef8bce27bf8616d8e0c878508c267d
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
This adds a new event type to the kernel event logger that tracks
thread-related events: being added to the ready queue, pending a
thread, and exiting a thread.
It's the only event type that contains "subevents" and thus has a
non-void parameter in their respective _sys_k_event_logger_*()
function. Luckily, as isn't the case with other events (such as IRQs
and thread switching), these functions are called from
platform-agnostic places, so there's no need to worry about changing
the assembly guts.
This is the first patch in a series adding support for better real-time
profiling of Zephyr applications.
Jira: ZEP-1463
Change-Id: I6d63607ba347f7a9cac3d016fef8f5a0a830e267
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Unlike assertions, these APIs are active at all times. The kernel will
treat these errors in the same way as fatal CPU exceptions. Ultimately,
the policy of what to do with these errors is implemented in
_SysFatalErrorHandler.
If the archtecture supports it, a real CPU exception can be triggered
which will provide a complete register dump and PC value when the
problem occurs. This will provide more helpful information than a fake
exception stack frame (_default_esf) passed to the arch-specific exception
handling code.
Issue: ZEP-843
Change-Id: I8f136905c05bb84772e1c5ed53b8e920d24eb6fd
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
For exceptions where we are just going to abort the current thread, we
need to exit handler mode properly so that PendSV can run and perform a
context switch. For ARM architecture this means that the fatal error
handling code path can indeed return if we were 1) in handler mode and
2) only wish to abort the current thread.
Fixes a very long-standing bug where a thread that generates an
exception, and should only abort the thread, instead takes down the
entire system.
Issue: ZEP-2052
Change-Id: Ib356a34a6fda2e0f8aff39c4b3270efceb81e54d
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We do the same thing on all arch's right now for thread_monitor_init so
lets put it in a common place. This also should fix an issue on xtensa
when thread monitor can be enabled (reference to _nanokernel.threads).
Change-Id: If2f26c1578aa1f18565a530de4880ae7bd5a0da2
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We do a bit of the same stuff on all the arch's to setup a new thread.
So lets put that code in a common place so we unify it for everyone and
reduce some duplicated code.
Change-Id: Ic04121bfd6846aece16aa7ffd4382bdcdb6136e3
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
There are a few places that we used an naked unsigned type, lets be
explicit and make it 'unsigned int'.
Change-Id: I33fcbdec4a6a1c0b1a2defb9a5844d282d02d80e
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types. This handles the remaining includes and kernel, plus
touching up various points that we skipped because of include
dependancies. We also convert the PRI printf formatters in the arch
code over to normal formatters.
Jira: ZEP-2051
Change-Id: Iecbb12601a3ee4ea936fd7ddea37788a645b08b0
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This is a start to move away from the C99 {u}int{8,16,32,64}_t types to
Zephyr defined u{8,16,32,64}_t and s{8,16,32,64}_t. This allows Zephyr
to define the sized types in a consistent manor across all the
architectures we support and not conflict with what various compilers
and libc might do with regards to the C99 types.
We introduce <zephyr/types.h> as part of this and have it include
<stdint.h> for now until we transition all the code away from the C99
types.
We go with u{8,16,32,64}_t and s{8,16,32,64}_t as there are some
existing variables defined u8 & u16 as well as to be consistent with
Zephyr naming conventions.
Jira: ZEP-2051
Change-Id: I451fed0623b029d65866622e478225dfab2c0ca8
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This reverts commit 7b9dc107a8.
We revert this as we intent to move away from {u}int{8,16,32,64}_t types
to our own internal types for sized variables so we shouldn't need the
PRI macros anymore.
Change-Id: I1d9d797fee47ca266867ae65656c150f8fe2adb2
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
To allow for various libc implementations (like newlib) in which the way
various {u}int{8,16,32}_t types are defined vary between both libc
implementations and across architectures we need to utilize the PRI
defines.
Change-Id: Ie884fb67015502288152ecbd64c37961a4f538e4
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Filter was wrong and sample was not being built on any boards. Exclude
platforms that do not support interrupt based UART drivers.
Jira: ZEP-2014
Change-Id: I84a690e7c93fae52335434830b83086019cfd00d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This code is non-functional and is a left over from an old version of
the kernel that does not work and is covered through other new features
in the kernel, for example object tracing.
Jira: ZEP-2013
Change-Id: Id12ad09e2d06186b53cd2f0dd030ac6d37d1229f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Remove deprecated macros and function and structs that
were deprecated 2 versions ago 1.6 for power management
jira:ZEP-973
Change-Id: I127e482c67e09afea6a2008672661862dbf00c80
Signed-off-by: Amir Kaplan <amir.kaplan@intel.com>
First step to removing legacy APIs, this will be a wakeup call for this
still using legacy APIs before we completely remove them.
Change-Id: I32db62ff73efaa7eb5ab9ebc4d4fdc4a7c34ae56
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When enabling CONFIG_FP_SHARING on ARM, 64 extra bytes are necessary
on the stack of each task in order to save FPU registers S16 to S31.
In the case of the idle stack, the default value of 256 bytes is too
small. As described in ZEP-1470, when the idle task is scheduled out,
floating point registers are saved, which corrupts the stack frame
(especially the saved PC value). When scheduling the idle task, the
restored PC will jump to nowhere, leading to a Usage Fault.
Increase the size of the idle stack by 64 bytes to fix this issue.
JIRA: ZEP-1470
Change-Id: Ib800cd51e5189dda8bf59332db661c21399db3e3
Signed-off-by: Florian Vaussard <florian.vaussard@heig-vd.ch>
Once all users of k_lifo migrate to k_queue this should no longer be
needed.
Change-Id: Ib8af40c57bf8feba7b06d6d891cfa57b44faad42
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes k_fifo functions rely on k_queue and port k_poll to use
k_queue directly.
Once all users of k_fifo migrate to k_queue this should no longer be
needed.
Change-Id: Icf16d580f88d11b2cb89e1abd23ae314f43dbd20
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This unifies k_fifo and k_lifo APIs thus making it more flexible regarding
where the data elements are inserted.
Change-Id: Icd6e2f62fc8b374c8273bb763409e9e22c40f9f8
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Some inconsistent spacing and private types starting with '_'.
Change-Id: I3354b69cc3934717d3b8097cdda98474339c1f32
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
The loop was not tracking the correct next node in the list correctly.
However, it happened that the fix is way more involved than just fixing
that small issue, due to the way that semaphore group timeouts work.
Instead of handling timeouts one-by-one, we have to handle all timeouts
in a semaphore group as one. To do that, we use the fact that the
timeout of the real thread is always found first in the kernel's
timeout_q, and if it has expired, we do not even look at the timeouts of
the dummy threads.
Change-Id: Iadcfd06f33c6b335efa2592b2c01eeb5ca67afde
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
Queuing in the timeout_q of timeouts expiring on the same tick queue
them in reverse order: as soon as the new timeout finds a timeout
expiring on the same tick or later, it get prepended to that timeout:
this allows exiting the traversal of the timeout as soon as possible,
which is done with interrupts locked, thus reducing interrupt latency.
However, this has the side-effect of handling the timeouts expiring on
the same tick in the reverse order that they are queued.
For example:
thread_c, prio 4:
uint32_t uptime = k_uptime_get_32();
while(uptime == k_uptime_get_32()); /* align on tick */
k_timer_start(&timer_a, 5, 0);
k_timer_start(&timer_b, 5, 0);
thread_a, prio 5:
k_timer_status_sync(&timer_a);
printk("thread_a got timer_a\n");
thread_b, prio 5:
k_timer_status_sync(&timer_b);
printk("thread_b got timer_b\n");
One could "reasonably" expect thread_a to run first, since both threads
have the same prio, and timer_a was started before timer_b, thus
inserted first in the timeout_q first (time-wise). However, thread_b
will run before thread_a, since timer_b's timeout is prepended to
timer_a's.
This patch keeps the reversing of the order when adding timeouts in the
timeout_q, thus preserving the same interrupt latency; however, when
dequeuing them and adding them to the expired queue, we now reverse that
order _again_, causing the timeouts to be handled in the expected order.
Change-Id: Id83045f63e2be88809d6089b8ae62034e4e3facb
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
Modify _get_first_thread_to_unpend() so that it does not remove the
thread from the wait queue. Rename it to _find_first_thread_to_unpend()
to match the new behaviour.
This will be needed to fix a semaphore group bug.
Change-Id: I1b7531c3beecf3b6a86ecf88a93a02449edd0767
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
Rather than explicitely checking the thread state bit.
Change-Id: Ic78427d9847e627a0e91d0147d3b6164450597f6
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
This has not bitten us yet, but it was a ticking timebomb.
This is similar to the issue that was found with irq_lock/irq_unlock
implementations on several architectures. Having a volatile variable is
not the way to force the sched_lock variable to be
incremented/decremented around the accesses to data it protects.
Instead, a compiler barrier must prevent the compiler from reordering
the memory accesses around setting of sched_lock. Needed in the inline
implementations _sched_lock()/_sched_unlock_no_reschedule(), which
resolve to simple decrement/increment of the per-thread sched_lock
variable.
Change-Id: I06f5b3524889f193efe69caa947118404b1be0b5
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
Xtensa port uses more stack than others. This was discussed with the team and
we agreed that this can be accepted for the first beta.
We will investigate this later to see how to avoid allocating coproc registers
for the system threads in order to reduce the stack overhead. However this
will not be before the port is considered stable.
Change-Id: Icd5b2b0ab68d0906b5408f35f081b100acabc010
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
This patch adds support for using device tree configuration files for
configuring ARM platforms.
In this patch, only the FLASH_SIZE, SRAM_SIZE, NUM_IRQS, and
NUM_IRQ_PRIO_BITS were removed from the Kconfig options. A minimal set
of options were removed so that it would be easier to work through the
plumbing of the build system.
It should be noted that the host system must provide access to the
device tree compiler (DTC). The DTC can usually be installed on host
systems through distribution packages or by downloading and compiling
from https://git.kernel.org/pub/scm/utils/dtc/dtc.git
This patch also requires the Python yaml package.
This change implements parts of each of the following Jira:
ZEP-1304
ZEP-1305
ZEP-1306
ZEP-1307
ZEP-1589
Change-Id: If1403801e19d9d85031401b55308935dadf8c9d8
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Poll events were getting registered even when polling conditions had
already been met, but events with conditions met did not register and
did not increment the number of events registered. This caused a
possible discrepancy between the number of events registered and the
position of the last event registered in the events array.
As soon as one event condition is met, the next ones in the array should
not get registered even if their condition is not met. This is what the
code does now.
Change-Id: Ibcc3b135ec9d3cf463beb9da3f641fec962b34bf
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
This flag is no longer necessary and TICKLESS_IDLE will be
enabled by default if SYS_POWER_MANAGEMENT is enabled.
Jira: ZEP-1325
Change-Id: Ic6cd4b8dc0a17c6a413cabf6509b215a4558318d
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Due to a limitation on XCC, the inline assembly does not
produce the expected instructions. This results in a wrong
code sequence. On the other hand, plain C code works well.
The note about compilers seems to not be an issue on any of
our currently supported compilers.
Change-Id: I9d2ab0fbf8a48d9dad51da3fd54453f205516d74
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
It was in the static initializers, but was missing from the object
runtime init functions.
Change-Id: I10d519760eabdbe640a19cc5cfa9241c1356b070
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
This will allow users to install a way of finding out what the event and
the objects are used for without looking at the object itself, or to
tag a bunch of objects that belong together.
The runtime init function _does not_ take a tag so that there is no
runtime hit if not needed. The static initializer macro _does_ take the
tag, so that it does not have to be initialized at runtime if needed,
and thus avoids a runtime hit.
Change-Id: I89a36c6f969ff952f9d1673b1bb5136e407535c6
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
When CONFIG_FP_SHARING is enabled without CONFIG_LEGACY
thread.c was referencing symbols like K_TASK_GROUP_FPU
which are defined in legacy.h
Change-Id: I4bb1723f91c3e3586c5d1bf05cf23a1c0d3d5aac
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
With the recently added k_poll feature, k_fifo_put_list was forgotten
about. Add the necessary code to wake up a k_poll call when
k_fifo_put_list is called.
Change-Id: Ib9baef5ee2bd00620e2eea5afdd81accc4518bd5
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
k_poll() is similar to the POSIX poll() API in spirit in that it allows
a single thread to monitor multiple events without actively polling
them, but rather pending for one or more to become ready. Such events
can be a direct event, or kernel objects (currently only semaphores and
fifos).
When a kernel object being polled on is ready, it is not "given" to the
poller: the poller must then acquire it via the regular API for the
object (e.g. k_sem_take()). Only one thread can poll on a particular
object at one time. These restrictions mean that k_poll() is most
effective when a single thread monitors multiple events that are not
subject for contention. For example, being the sole reader on multiple
fifos, or the only thread being signalled by multiple semaphores, or a
combination of both.
Change-Id: I7035a9baf4aa016fb87afc5f5c0f5f8cb216480f
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
Dissociate wait queue initialization from doubly-linked lists if the
underlying implementation is to be abstracted.
Change-Id: Id7544c6ac506643437f9c4f0ae97e7eecab8d06d
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
The K_<thread option> flags/options avaialble to users were hidden in
the kernel private header files: move them to include/kernel.h to
publicize them.
Also, to avoid any future confusion, rename the k_thread.execution_flags
field to user_options.
Change-Id: I65a6fd5e9e78d4ccf783f3304b607a1e6956aeac
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
The execution_flags will store the user-facing states of a thread.
This also fixes a bug where K_ESSENTIAL was already assigned to
execution_flags via the options field of
k_thread_spawn()/K_THREAD_DEFINE().
Change-Id: I91ad7a62b5d180e09eead8985ff519809959ecf2
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
They are not part of the API, so rename from K_<state> to
_THREAD_<state>.
Change-Id: Iaebb7d3083b80b9769bee5616e0f96ed2abc5c56
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
Unused.
Reuse bit for K_FP_REGS to keep the used bits the lowest possible.
Change-Id: I5998801ef34156271d4f66d1948a05e0b2ce58f7
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
This will be needed for some thread user options that will move to
kernel.h since they are part of the user API.
Change-Id: I46e302b6cafcdddbad3458134b98feb5b8d45d9b
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
When prio and sched_locked were moved into a struct together to create a
union with the combined preempt field, the volatile qualifier moved from
sched_locked to prio by mistake.
Change-Id: I5a8e01324f14e77e3d7162c12515471826023633
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.
Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.
Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file. Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.
Jira: ZEP-1457
Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Make it depend on CONFIG_LEGACY_KERNEL being enabled.
Change-Id: Id5d3cd35a52d38bf7476ea8e51b71e2c687f0923
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The idle priority was not accounted for.
With this change, the philosophers demo runs in coop-only mode.
Change-Id: I23db33687bcf3b2107d5fc07977143730f62e476
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
If the system's priority inheritance priority ceiling is not the same as
the highest priority in the system, it was possible for a thread owning
the mutex to get its priority lowered instead of left unchanged.
Change-Id: Ic06a1c4a66322c2949b2ba2f53efa03200fb1fc1
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
-1 is reserved for the idle thread in coop-only mode and -1 does not
exist as a priority in preempt-only mode.
With this change, the philosophers demo runs in preempt-only mode.
Change-Id: Id15a6eafc7582966deaf0db9ed6960b5da74be33
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
Similar to what was available with nano timers in the original kernel,
allow a user to associate opaque data with a timer.
Fix for ZEP-1558.
Change-Id: Ib8cf998b47988da27eba4ee5cd2658f90366b1e4
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
Default 256 bytes stack size for idle task is not enough, as
stack grows/shrinks by a multiple of 16-bytes in the
RISC-V architecture.
Increase it to 512 bytes for RISCV32 architecture
Change-Id: I8321c48e4c1a877b252ba5561f3cbdd1fe475fc7
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
added _MOVE_INSTR for RISCV32 architecture
The store instruction has a different syntax in RISC-V,
compared to the other architectures. Hence, for each
architecture, specify the entire load instruction within
the _MOVE_INSTR variable.
Change-Id: Iedc421e73411876abd8b698f7d4b46081b473d79
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
For some of our samples/test we disable all console support, yet enable
BOOT_BANNER in tests/include/test.config, this can generate warnings
like:
warning: (BOOT_BANNER && BLUETOOTH_DEBUG_LOG && BLUETOOTH_DEBUG_MONITOR)
selects PRINTK which has unmet direct dependencies (CONSOLE_HAS_DRIVER)
So having BOOT_BANNER depend on CONSOLE_HAS_DRIVER cleans things up.
Change-Id: Ia6a6348fc08b0808ea6eaedb8c8833507f82c702
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The main, idle, interrupt and workqueue call stack definitions are not available
to applications to call stack_analyze() on, but they often require to be
measured empirically to tune their sizes in particular applications and
use cases.
This exposes a new k_call_stacks_analyze() API call that allows the
application to measure the used call stack space for the 4
kernel-defined call stacks.
Additionally for the ARC architecture the FIRQ stack is also profiled.
Change-id: I0cde149c7366cb6c4bbe8f9b0ab1cc5b56a36ed9
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
These two fields in the thread structure control the preemptibility of a
thread.
sched_locked is decremented when the scheduler gets locked, which means
that the scheduler is locked for values 0xff to 0x01, since it can be
locked recursively. A thread is coop if its priority is negative, thus
if the prio field value is 0x80 to 0xff when looked at as an unsigned
value.
By putting them end-to-end, this means that a thread is non-preemptible
if the bundled value is greater than or equal to 0x0080. This is the
only thing the interrupt exit code has to check to decide to try a
reschedule or not.
Change-Id: I902d36c14859d0d7a951a6aa1bea164613821aca
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Some thread fields were 32-bit wide, when they are not even close to
using that full range of values. They are instead changed to 8-bit fields.
- prio can fit in one byte, limiting the priorities range to -128 to 127
- recursive scheduler locking can be limited to 255; a rollover results
most probably from a logic error
- flags are split into execution flags and thread states; 8 bits is
enough for each of them currently, with at worst two states and four
flags to spare (on x86, on other archs, there are six flags to spare)
Doing this saves 8 bytes per stack. It also sets up an incoming
enhancement when checking if the current thread is preemptible on
interrupt exit.
Change-Id: Ieb5321a5b99f99173b0605dd4a193c3bc7ddabf4
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Add global option for legacy configurations and enable by default for
backward compatibility. Disable option on tests and keep it on legacy
samples and tests.
Jira: ZEP-964
Change-Id: I0831e2aa74d438b1ac74eb762186cb220a504beb
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Remove legacy option and use SYS_CLOCK_EXISTS where appropriate.
Change-Id: I3d524ea2776e638683f0196c0cc342359d5d810f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Similar to _pend_queue, it's more efficient to do the logic inline.
Change-Id: I68ac4fbc26c97b6ec9322caef98504ff6ccc8727
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
It's calling a function on every iteration, it's more efficient to just
do the logic inline.
Change-Id: I166e377d4ffb3056749fd625cb789173030904ac
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Use least significant bits for common flags and high bits for
arch-specific ones.
Change-Id: I982719de4a24d3588c19a0d30bbe7a27d9a99f13
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This will allow for an enhancement when checking if the thread is
preemptible when exiting an interrupt.
Change-Id: If93ccd1916eacb5e02a4d15b259fb74f9800d6f4
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Not needed, since only the thread itself can modifiy its own
sched_locked count.
Change-Id: I3d3d8be548d2b24ca14f51637cc58bda66f8b9ee
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Some tick frequencies lend themselves to optimized conversions from ms
to ticks and vice-versa.
- 1000Hz which does not need any conversion
- 500Hz, 250Hz, 125Hz where the division/multiplication are a straight
shift since they are power-of-two factors of 1000.
In addition, some more generally used values are made to use optimized
conversion equations rather than the generic one that uses 64-bit math,
and often results in calling compiler intrinsics.
These values are: 100Hz, 50Hz, 25Hz, 20Hz, 10Hz, 1Hz (the last one used
in some testing).
Avoiding the 64-bit math intrisics has the additional benefit, in
addition to increased performance, of using a significant lower amount
of stack space: 52 bytes on ARM Cortex-M and 80 bytes on x86.
Change-Id: I080eb338a2637d6b1c6838c119af1a9fa37fe869
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This limits the execution contexts that will go over the loop in
_unpend_first_thread() to only ISRs of very high priority that are
preempting the system clock timer ISR, and only during the time it is
handling timeouts.
Change-Id: Iaf0500d28a2de5e077c9cf9861a5a70244127d58
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Use a short name for this option CONFIG_OBJECT_TRACING.
Change-Id: Id27de7ef9ca299492b6b7d2324d9f5bcf8059a31
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Also remove mentions of unified kernel in various places in the kernel,
samples and documentation.
Change-Id: Ice43bc73badbe7e14bae40fd6f2a302f6528a77d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Reorganise and cleanup Kernel Kconfig options and group options of the
same area under Menus to ease readability and to have a better structure
when using menuconfig.
Change-Id: Ic6b39730297861367abd345ede35e41c046c099d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move those into a separate Kconfig file and include them instead.
Change-Id: Ifa25d6ec92937080ad5970af7ca5c3f07ddec961
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
rename NANOKERNEL_TICKLESS_IDLE_SUPPORTED to
TICKLESS_IDLE_SUPPORTED and remove nanokernel occurances in Kconfig
files.
Make TICKLESS_IDLE depend on hardware that supports it.
Change-Id: I6a2e4fb0f7cf4b45475b48e71823ea089ee98759
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Also remove some old cflags referencing directories that do not exist
anymore.
Also replace references to legacy APIs in doxygen documentation of
various functions.
Change-Id: I8fce3d1fe0f4defc44e6eb0ae09a4863e33a39db
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
And also remove now obsolete ARCH_HAS_TASK_ABORT.
ARC does not need the options either.
Change-Id: Ie52d63178a367ce12b911dacfe2d389f4f75ed2d
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The system work queue spawns a coop thread to hanlde the work items. If
it is spawned before the kernel is up and the initialization dummy
thread's priority is lower, there will be a context switch into the
system work queue's thread at that time, before the kernel is ready to
handle this.
Change-Id: I879659ab58231c5a5cfaa34f2f65c2eccab99142
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Legacy applications still need that, otherwise kernel objects are not
configured correctly. Will be removed later.
Change-Id: I22df10e4adcc11f035f9813bea8c93dd1a560a1d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
For very constrained systems, like bootloaders.
Only the main thread is available, so a main() function must be
provided. Kernel objects where pending is in play will not behave as
expected, since the main thread cannot pend, it being the only thread in
the system. Usage of objects should be limited to using K_NO_WAIT as the
timeout parameter, effectively polling on the object.
Change-Id: Iae0261daa98bff388dc482797cde69f94e2e95cc
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
A thread cannot have a coop priority in this case. It turns out a
priority is not needed when a thread is not inserted in the ready queue,
which is the case with the dummy thread.
The comment was also out-of-date, since it referred to a nanokernel
concept.
Change-Id: Id117501164bd72383d53f3df13030cf95dadc38b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Some kernel operations, like scheduler locking can be optmized out,
since coop threads lock the scheduler by their very nature. Also, the
interrupt exit path for all architecture does not have to do any
rescheduling, again by the nature of non-preemptible threads.
Change-Id: I270e926df3ce46e11d77270330f2f4b463971763
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
nano_cpu_idle/nano_cpu_atomic_idle were not ported to the unified
kernel, and only the old APIs were available. There was no real impact
since, in the unified kernel, only the idle thread should really be
doing power management. However, with a single-threaded kernel, these
functions can be useful again.
The kernel internals now make use of these APIs instead of the legacy
ones.
Change-Id: Ie8a6396ba378d3ddda27b8dd32fa4711bf53eb36
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The numbers of timeouts that expire on a given tick is arbitrary. When
handling them, interrupts were locked, which prevented higher-priority
interrupts from preempting the system clock timer handler.
Instead of looping on the list of timeouts, which needs interrupts being
locked since it can be manipulated at interrupt level, timeouts are
dequeued one by one, unlocking interrupts between each, and put on a
local 'expired' queue that is drained subsequently, with interrupts
unlocked. This scheme uses the fact that no timeout can be prepended
onto the timeout queue while expired timeouts are getting removed from
it, since adding a timeout of 0 is prohibited.
Timer handlers now run with interrupts unlocked: the previous behaviour
added potentially horrible non-determinism to the handling of timeouts.
Change-Id: I709085134029ea2ad73e167dc915b956114e14c2
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
These tick computation can take a significant amount of time, and there
is no reason to do them with interrupts locked.
Change-Id: I2d8803ec6025b827e9450fa493084bbf8be98bad
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Use _INACTIVE instead of hardcoding -1.
_EXPIRED is defined as -2 and will be used for an improvement so that
interrupts are not locked for a non-deterministic amount of time while
handling expired timeouts.
_abort_timeout/_abort_thread_timeout return _INACTIVE instead of -1 if
the timeout has already been disabled.
Change-Id: If99226ff316a62c27b2a2e4e874388c3c44a8aeb
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The way the ready thread cache was implemented caused it to not always
be "hot", i.e. there could be some misses, which happened when the
cached thread was taken out of the ready queue. When that happened, it
was not replaced immediately, since doing so could mean that the
replacement might not run because the flow could be interrupted and
another thread could take its place. This was the more conservative
approach that insured that moving a thread to the cache would never be
wasted.
However, this caused two problems:
1. The cache could not be refilled until another thread context-switched
in, since there was no thread in the cache to compare priorities
against.
2. Interrupt exit code would always have to call into C to find what
thread to run when the current thread was not coop and did not have the
scheduler locked. Furthermore, it was possible for this code path to
encounter a cold cache and then it had to find out what thread to run
the long way.
To fix this, filling the cache is now more aggressive, i.e. the next
thread to put in the cache is found even in the case the current cached
thread is context-switched out. This ensures the interrupt exit code is
much faster on the slow path. In addition, since finding the next thread
to run is now always "get it from the cache", which is a simple fetch
from memory (_kernel.ready_q.cache), there is no need to call the more
complex C code.
On the ARM FRDM K64F board, this improvement is seen:
Before:
1- Measure time to switch from ISR back to interrupted task
switching time is 215 tcs = 1791 nsec
2- Measure time from ISR to executing a different task (rescheduled)
switch time is 315 tcs = 2625 nsec
After:
1- Measure time to switch from ISR back to interrupted task
switching time is 130 tcs = 1083 nsec
2- Measure time from ISR to executing a different task (rescheduled)
switch time is 225 tcs = 1875 nsec
These are the most dramatic improvements, but most of the numbers
generated by the latency_measure test are improved.
Fixes ZEP-1401.
Change-Id: I2eaac147048b1ec71a93bd0a285e743a39533973
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Disable MDEF option and set it only in legacy projects.
Change-Id: I2e1f011eb1f876af929140e36f71f0efb5e955c1
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The ARG_UNUSED macro is added to avoid compiler warnings.
Change-Id: Ie9b72c94191318c1d667d7929eb029098c62e993
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Use uint32_t for counters instead of int to avoid compiler warnings.
Change-Id: Ie96dfaca650b5f91562c0740c18610fc40968be6
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
mem_pool structures use uint32_t for counters and size_t
to specify sizes, however some routines in mem_pool.c
make use of int for similar purposes. This commit fixes
that situation by updating some variables to match
mem_pool data types.
Change-Id: I0aa01c27e512d06d40432e8091ed8fd9d959970c
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Factor out the code for evaluating the remaining time for _timeout
structs so that it can also be used for other objects besides k_timer
structs (like k_delayed_work, coming in a subsequent patch).
Change-Id: I243a7b29fb2831f06e95086a31f0d3a6c37dad67
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Use the SYS_INIT() mechanism to invoke the sys_rand32_init() function
in random drivers that require an initializer. Remove all empty
sys_rand32_init() instances.
The existing explicit sys_rand32_init() function runs immediately after
PRE_KERNEL_2 before stack canaries are initialized. In order to get
equivalent behaviour with sys_rand32_init() we set SYS_INIT() to
initialize the random drivers at the lowest priority of PRE_KERNEL_2.
Change-Id: I4521e44daac806bc4eef01ce7fdf2ba5367e0587
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
To guarantee that the compiler does not reorder the execution of
irq_lock() with preceding operations, a volatile qualifier is
placed before the declaration of the ticks variable, which then
ensures that irq_lock() is executed after the tick calculation but
before accessing the ready and timeout queues.
Without the volatile keyword interrupts will be disabled during the
calculation of the ticks, which increases interrupt latency
significantly.
Change-Id: I2da82a1282e344f3b8d69e9457b36a4cb1d9ec18
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Use standard library calls like memset/memcpy for setting up BSS and DATA
sections during system initialization, this helps to take advantage of
architecture specific optimizations from standard library.
Change-Id: Ia72b42aa65b44d1df7c22dd1fbc39a44fa001be9
Signed-off-by: Mahavir Jain <mjain@marvell.com>
Make boot banner more informative by adding kernel version string
Change-Id: I21865ea3a001fba2c30fe58e6e052aae59fef3e2
Signed-off-by: Mahavir Jain <mjain@marvell.com>
If delayed work is already submitted or completed, then subsequent
cancel should return -EINVAL as return status.
Fixes ZEP-1373.
Change-Id: I16bbacca7e31a5a5d8e5a89e729d70302ada6223
Signed-off-by: Mahavir Jain <mjain@marvell.com>
Interrupt must be locked before inserting a timeout in the timeout
queue.
Change-Id: Iab0bf01f393e66a6403d2f85e899dbf737da4afc
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The fact that a thread is timing out was tracked via two flags: the
K_TIMING thread flag bit, and the thread's timeout's
delta_ticks_from_prev being -1 or not. This duplication could
potentially cause discrepancies if the two flags got out-of-sync, and
there was no benfits to having both.
Since timeouts that are not parts of a thread rely on the value of
delta_ticks_from_prev, standardize on it.
Since the K_TIMING bit is removed from the thread's flags, K_READY would
not reflect the reality anymore. It is removed and replaced by
_is_thread_prevented_froM_running(), which looks at the state flags that
are relevant. A thread that is ready now is not prevented from running
and does not have an active timeout.
Change-Id: I902ef9fb7801b00626df491f5108971817750daa
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Also remove NO_METRIC, which is not referenced anywhere anymore.
Change-Id: Ieaedf075af070a13aa3d975fee9b6b332203bfec
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Now that we're out of the unified kernel development phase, turn off
that debugging option.
Change-Id: I89decbdf445b1ba111a829edf2c8a36846419586
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
It was possible for a dummy thread to be not timing, but not having
timeout.delta_ticks_from_prev not be -1 at the same time, which is a big
no-no.
Use _init_thread_base() to do a full initialization of the dummy thread.
Fixes ZEP-1312.
Change-Id: I16a2373be3329c142cf26f5dca6bfdbe6014ac5e
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Move _thread_base initialization to _init_thread_base(), remove mention
of "nano" in timeouts init and move timeout init to _init_thread_base().
Initialize all base fields via the _init_thread_base in semaphore groups
code.
Change-Id: I05b70b06261f4776bda6d67f358190428d4a954a
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Renamed main_stack and idle_stack, to _main_stack and
_idle_stack, respectively, and made them globals. This does
not affect performance. They are still kept kernel private
symbols and not part of kernel API.
This will allow these symbols to be referenced in calls to
stack_analyse misc functions to profile stack usage in
applications.
Change-id: Id6b746c5cfda617c26901c6e62c3e17114471f57
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
It's possible that an architecture needs a custom way of switching to
the main() task, rather than using _Swap() with a dummy thread.
Change-Id: I14e9bc67be35174ff16209bcea27b18a069ff754
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Artifact from microkernel, for handling multiple pending tasks on
nanokernel objects.
Change-Id: I3c2959ea2b87f568736384e6534ce8e275f1098f
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
In addition to more priorities taking more memory to host them, finding
the next thread to run when it is not cached is slower since each extra
set of 32 priorities maps to a loop iteration. That loop is remove
entirely when the number of priorities is less than 32 (31 + the idle
thread).
Fixes ZEP-1303.
Change-Id: I3205df90d379a0f4456ff1d7f1aaa67ad2cddf15
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Rewrites the timestamping logic to always generate timestamps
via a function pointer that is initialized to sys_cycle_get_32(),
but can be changed to point to a user-supplied function. This
eliminates the need for an if/then/else construct in every place
that a timestamp is generated.
Change-Id: Id11f8c41b193a93cece16565978a525056010f0e
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Prepares the kernel event logger APIs for inclusion in the
API guide. Also corrects a couple of other issues:
* Gets rid of obsolete thread monitor code.
* Renames "timer_func" global variable to "_sys_k_timer_func"
to align it with kernel naming conventions.
Change-Id: I93d403f83ae44ff45dda489c2ead7bfec6ce1fa3
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Event logger APIs still express timeout delays in ticks;
need to convert to milliseconds when using unified kernel APIs.
Change-Id: I5fab66be660621cd2029417eaff3758e3ef4ba2c
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
When moving arch-specific thread structure to arch-agnostic, some field
accesses were missed when used in K_DEBUG statements, which are turned
off by default.
Change-Id: Ife0f49b8185a0db468deab73555f7034f20ca3e8
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Prio should be an int, since values are small integers, not a fixed-size
int32_t. It aligns with the prio parameters of the other APIs.
Stack size should be size_t.
Change-Id: Id29751b86c4ad7a7c2a7ffe446c2a96ae83c77bf
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
NANOKERNEL is obsolete and this kernel service is still using it causing
deperecaton warnings. Move it to POST_KERNEL
Change-Id: I17fabd080645f93a8599f4ea25da844e1ec5f4bb
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Replaces confusing (and excessively long) configuration option
names with more intuitive names. Also enhances the description
of each option to clarify its use.
Change-Id: If4d4541407627482b1e90302cfc9df3bc8130d44
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
SYS_DLIST_FOR_EACH_NODE() is marked as non-safe when an item is removed
from the list while looping over it. This is not true per-se, since the
item, when removed, keeps its next and prev pointers intact; however, it
is true if the item is then put into a list, be it a different one or
the same one. To prevent this, SYS_DLIST_FOR_EACH_NODE_SAFE() must be
used.
_mbox_message_put() can remove items from the rx queue and then put them
in the ready queue: this would cause the loop to start processing other
ready threads as item in the rx queue.
k_mbox_get() also removes items, from the tx queue, but does not seem to
add them to another list; however, it now uses the safe version as well,
since that is the proper usage.
Change-Id: Ieccbff238fc8a036c0d53d873eaaf55f4f5a14af
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
There was a lot of duplication between architectures for the definition
of threads and the "nanokernel" guts. These have been consolidated.
Now, a common file kernel/unified/include/kernel_structs.h holds the
common definitions. Architectures provide two files to complement it:
kernel_arch_data.h and kernel_arch_func.h. The first one contains at
least the struct _thread_arch and struct _kernel_arch data structures,
as well as the struct _callee_saved and struct _caller_saved register
layouts. The second file contains anything that needs what is provided
by the common stuff in kernel_structs.h. Those two files are only meant
to be included in kernel_structs.h in very specific locations.
The thread data structure has been separated into three major parts:
common struct _thread_base and struct k_thread, and arch-specific struct
_thread_arch. The first and third ones are included in the second.
The struct s_NANO data structure has been split into two: common struct
_kernel and arch-specific struct _kernel_arch. The latter is included in
the former.
Offsets files have also changed: nano_offsets.h has been renamed
kernel_offsets.h and is still included by the arch-specific offsets.c.
Also, since the thread and kernel data structures are now made of
sub-structures, offsets have to be added to make up the full offset.
Some of these additions have been consolidated in shorter symbols,
available from kernel/unified/include/offsets_short.h, which includes an
arch-specific offsets_arch_short.h. Most of the code include
offsets_short.h now instead of offsets.h.
Change-Id: I084645cb7e6db8db69aeaaf162963fe157045d5a
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The unified kernel is now the only supported kernel, so this
option is unnessary. Eliminating this option also enables
the removal of some legacy code that is no longer required.
Change-Id: Ibfc339d643c8de16a2ed2009c9b468848b8b4972
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
k_alert_init() needs to set the "flags" field of its associated
work item to zero, indicating that the work item has not yet
been submitted to the system workqueue. Using the standard work
item initializer macro ensures this is done correctly.
Change-Id: I0001a5920f20fb1d8dc182191e6a549c5bf89be5
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The API to disable _sys_soc_resume notification is currently
called _sys_soc_disable_wake_event_notification. This is
misleading because it is possible that the ISR from which
_sys_soc_resume is called could be from a different interrupt
with higher priority that happened before interrupts were
enabled. More accurately, it is a notification of exit from
kernel idling after pm operations.
Jira: ZEP-1271
Change-Id: I83747f2cacac1bc17f135d12f4aa4478970fc02d
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
_sys_soc_resume hook is over loaded to handle to different
scenarios. It is primarily called to notify exit of kernel idling
after PM operations. It is also used to notify exit from deep sleep.
This is very confusing and also makes the implementation of the
hook function very difficult because of very different conditions
involved in the 2 different use cases. Further, users may not require
either or both use cases depending of their custom boot flow and
power state handling. To simplify, create a separate hook for the
purpose of deep sleep exit notification. Use the existing one to
only notify kernel idling exit after PM operations.
Jira: ZEP-1256
Change-Id: I96350199a0fd37f16590c8ee5302a94a3d71b8ba
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
There was no check to see if the current context was running an ISR when
taking a decision whether to do a context switch or not.
Change-Id: Ib9c426de8c0893b3d9383290bb59f6e0e41e9f52
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
Useful for finding out if the current thread is protected against
preemption when using non-preemption to protect data structures.
Change-Id: Ib545a3609af3646ba49eeeb5a2c50dc51af010d4
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Oversight. These functions are used extensively in the kernel guts, but
are also supposed to be an API.
k_sched_lock used to be implemented as a static inline. However, until
the header files are cleaned-up, and everything, including applications
get access to the kernel internal data structures, it must be
implemented as a function. To reduce the cost to the internals of the
kernel, the new internal _sched_lock() contains the same implemetation,
but is inlined.
Change-Id: If2f61d7714f87d81ddbeed69fedd111b8ce01376
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
An application-supplied main() routine is now considered to be
essential to system operation. Thus, if main() experiences an
error that aborts the main thread a fatal system error is raised.
Note: If main() completes its work and does a standard return-
to-caller the main thread terminates normally.
Change-Id: Icc9499f13578299244a856a246ad2a7d34a72f54
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
A thread defined via a legacy MDEF that belongs to the FPU or
SSE task group must set the thread option bits for FP or SSE
register use prior to being spawned.
If this is not done, and the kernel is configured for SSE support,
the kernel will auto-enable the thread's use of floating point
so that the thread saves SSE register context info even if it
belongs to just the FPU task group, which could cause the thread
to overflow its stack.
Note that this change only increases footprint for x86-based
applications that enable floating point register sharing.
Change-Id: Idfe4d20bcd7bc42b4cee6ac40ad7987e2a45ccf6
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
PRIMARY, SECONDARY, NANOKERNEL, MICROKERNEL init levels are now
deprecated.
New init levels introduced: PRE_KERNEL_1, PRE_KERNEL_2, POST_KERNEL
to replace them.
Most existing code has instances of PRIMARY replaced with PRE_KERNEL_1,
SECONDARY with POST_KERNEL as SECONDARY has had a longstanding bug
where the documentation specified SECONDARY ran before the kernel started
up, but actually ran afterwards.
Change-Id: I771bc634e9caf7f17dbf214a270bc9967eed7d32
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Verify the thread priorities are within the bounds when starting a new
thread and when changing the priority of a thread.
Change-Id: I007b3b249e4b80235b6439cbee44cad2f31973bb
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Since lower-numbered thread priorities are higher, the code can be
misleading when comparing priorities, and often require the same type of
comments. Instead, use utility inline functions that does the
comparisons.
_is_prio_higher already existed, but add comparisons for "lower than",
"higher than or equal to" and "lower than or equal to".
Change-Id: I8b58fe9a3dd0eb70e224e970fe851a2575ad468b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
- Add missing irq_lock() before invoking power management.
- Only yield if the idle thread is a coop thread (in coop-only
configurations).
Change-Id: I030795e782590b3023f1d7883bbd058da2c45f4f
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Add an assertion against unlocking mutex that is not locked.
Change-Id: I1032fb904e364015b486502c035529c8fe31de7a
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
include/ will be cleaned up in a subsequent patch.
Change-Id: If3609f5fc8562ec4a6fec4592aefeec155599cfb
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Making a reference to the common work queue code should not necessarily
drag in the system workqueue, since it is possible to use a workqueue
that is not the system workqueue. This is done by moving the system
workqueue into its own code module.
Moving the system workqueue to its own code module allows removing the
NANO_WORKQUEUE and SYSTEM_WORKQUEUE kconfig options, and compiling the
common workqueue code and system workqueue all the time. They are only
linked in the final image if a reference to them exist, same as the
other kernel modules.
Change-Id: I6f48d2542bda24f4702e7c2e317818dd082b3c11
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
It is now possible to specify the expiry and stop functions
of a statically-defined timer, just as can be done for a
dynamically-defined timer.
[Part of fix to ZEP-1186]
Change-Id: Ibb9096f3fdafdc6c904184587f86ecd52accdd66
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Adds standard prefix to symbolic option that flags a thread
as essential to system operation.
Change-Id: Ia904a81ce343fdd1cd44caaaeae641d822777f9b
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Port the power management test app to use unified kernel.
Change-Id: I2f10748be5ca7d9792f6e97c35f5f2aabab769e7
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
QMSI 1.3 natively supports restoring the SoC and peripherals
after sleep.
The Zephyr Power Management shim layer is updated
in order to support QMSI functions.
The following functions have been added:
void _sys_soc_set_power_state(enum power_state);
void _sys_soc_power_state_post_ops(void);
In order to fully support deep sleep, the function
_sys_soc_set_power_state now support saving and
restoring CPU context and returns to the application.
_sys_soc_set_power_state function also abstracts
QMSI cpu states and enable the application to choose
between C1/C2 or C2LP states.
The QMSI power states are mapped as follows:
SYS_SOC_POWER_STATE_CPU_LPS -> power_cpu_c2lp
SYS_SOC_POWER_STATE_CPU_LPS_1 -> power_cpu_c2
SYS_SOC_POWER_STATE_CPU_LPS_2 -> power_cpu_c1
SYS_SOC_POWER_STATE_DEEP_SLEEP -> power_soc_deep_sleep
SYS_SOC_POWER_STATE_DEEP_SLEEP_1 -> power_soc_sleep
The following functions have been removed:
void _sys_soc_set_power_policy(uint32_t pm_policy);
int _sys_soc_get_power_policy(void);
FUNC_NORETURN void _sys_soc_put_deep_sleep(void);
void _sys_soc_put_low_power_state(void);
void _sys_soc_deep_sleep_post_ops(void);
Those changes are propagated to the samples.
All calls to QMSI are removed.
Jira: ZEP-1045, ZEP-993, ZEP-1047
Change-Id: I26822727985b63be0a310cc3590a3e71b8e72c8c
Signed-off-by: Julien Delayen <julien.delayen@intel.com>
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Defines an object tracing list for each kernel object type
that supports object tracing, and ensures that both statically
and dynamically defined objects are added to the appropriate list.
Ensure that each static kernel object is grouped together with
the other static objects of the same type. Revise the initialization
function for each kernel type (or create it, if needed) so that
each static object is added to the object tracing list for its
associated type.
Note 1: Threads are handled a bit differently than other kernel
object types. A statically-defined thread is added to the thread
list when the thread is started, not when the kernel initializes.
Also, a thread is removed from the thread list when the thread
terminates or aborts, unlike other types of kernel objects which
are never removed from an object tracing list. (Such support would
require the creation of APIs to "uninitialize" the kernel object.)
Note 2: The list head variables for all kernel object types
are now explicitly defined. However, the list head variable for
the ring buffer type continues to be implicitly defined for the
time being, since it isn't considered to be an core kernel object
type.
Change-Id: Ie24d41023e05b3598dc6b344e6871a9692bba02d
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Allows event objects to pend signals in a cumulative way using
the semaphore in a non-binary way.
Jira: ZEP-928
Change-Id: I3ce8a075ef89309118596ec5781c15d4f3289d34
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Enables boot time timestamps for unified kernel.
Also Splits the source code into microkernel and nanokernel versions
instead of having common code. Not only does this make the code for
each project easier to read, but it also easily allows the nanokernel
version to link against the correct version of main().
Change-Id: Ie0afa2272c3347ebdacc0e3daeebbfe9583fe596
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Before, the kernel would run the main() function twice; first
as an entry in k_task_list, and then again from _main(). The
_main() invocation would be using a potentially insufficient stack
size.
Now if an MDEF file declares a main() thread, invoke it from
_main(), but honor the desired priority and stack size.
Issue: ZEP-1145
Change-Id: I1abf38fc038e270059589b11d96fae1b3f265208
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Event is such an overloaded and generic term (event logger, *kernel*
event logger, "protocol" events in other subsystems, etc.), that it is
confusing for the name an object. Events are kinda like signals, but not
exactly, so we chose not to name them 'signals' to prevent further
confusion. "Alerts" felt like a good fit, since they are used to "alert"
an application that something of significance should be addressed and
because an "alert handler" can be proactively registered with an alert.
Change-Id: Ibfeb5eaf0e6e62702ac3fec281d17f8a63145fa1
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This better aligns with the actual functionality of the object.
Change-Id: I70abf54f994e92abd7367251089ea4f735d273fe
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Fix the error in thread rescheduling:
Fix Fast IRQ exit routine error when it reschedules threads if
(prio >= 0) || (sched_locked == 0) || (next_thread == _current),
while the correct condition for thread rescheduling is:
(prio >= 0) && (sched_locked == 0) && (next_thread != _current),
Fix regular IRQ error when the regular IRQ exit routine rescheduled
threads when (next_thread == _current) instead of
(next_thread != current).
Increased IDLE_STACK_SIZE for ARC architecture, to hold saved
registers.
Change-Id: I1d87a968e231e13822844b7564567e6ca310cde2
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
They were the same, standardize on the lowercase one.
Change-Id: I8bca080e45f3e0970697d4451e468b9081f96f5f
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Some changes that went into k_idle.c were missing in idle.c
causing errors while building power management code for
unified kernel. Added the missing changes.
Tested with power_mgr app built for unified kernel.
Jira: ZEP-1139
Change-Id: I9fe005544f7ee69d3cb3ff10c649be28037fcf15
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Adapting to unified kernel naming of 'coop thread'.
Change-Id: I66cb766c2269acf0867e434bc21f633ea1111f89
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Needed by the kernel event logger when it records a context switch.
The kernel event logger releases a semaphore when a new event is
available in the log so that a thread can consume the event. However,
giving that semaphore cannot add a context switch event itself in the
log or the logger would be caught in an infinite loop.
Change-Id: I571a4aa0d302775e09cdc2d654a6b61f8b2e42c7
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Idle thread may need a bigger stack depending on extra work it has to
do, like power management or kernel event logging.
Change-Id: Iff691d7838036d602bad79799820b68ad55ad00f
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Eliminates references to "fibers" and "tasks". Eliminates unnecessary
doxygen tags for internal routines. Miscellaneous other corrections
and improvements.
Change-Id: I0272fa477773c075799b67138bad5debcfd6b01e
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Existing code wasn't removing a thread from the kernel's list
of active threads if the thread terminated or aborted. (It did
remove it if the delayed starting of a thread was cancelled.)
Change-Id: Icc97917e33765696480d0e9bf31e882ef555d095
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This is needed because some thread termination paths can be
invoked with no guarantee that thread preemption won't happen.
(It also aligns with the approach taken by the thread monitoring
initialization code.)
Change-Id: I28a384e051775390eb047498cb23fed22910e4df
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Renames _thread_exit() to _thread_monitoring_exit() to make
its purpose clearer. Revises the associated comments and
removes unnecessary doxygen tags.
Change-Id: I010a328d35d2d79d2a29b9d0b6c02097bb655989
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The new kernel doesn't support the thread abort handler concept,
so only the legacy API for this capability is needed.
Change-Id: Ie809092e73b784504c3d298911d216bed8dd8993
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Fleshes out the prototype heap memory pool support
to make it fully operational. Noteworthy changes are
listed below:
Tweaks arguments to k_malloc() and k_free() to be more like
malloc() and free(). Similarly, modifies k_free() to take
no action when passed a NULL pointer.
Now stores the complete block descriptor at the start
of any block allocated from the heap memory pool. This
increases memory overhead by 4 bytes per block, but
streamlines the allocation and freeing algorithms. It also
ensures that the routines will work if the block descriptor
internals are changed in the future.
Now allows the heap memory pool to be defined using the
HEAP_MEM_POOL_SIZE configuration option. This will be the
official configuration approach in the unified kernel.
Also allows the heap memory pool to be defined using the
(undocumented) HEAP_SIZE entry in the MDEF. This is provided
for legacy reasons only.
Co-locates memory pool initialization code to keep the line
that causes memory pool initialization to be done during booting
right next to the routine that does the initialization.
Change-Id: Ifea9d88142fb434d4bea38bb1fcc4856a3853d8d
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Reworks k_work_q_start() so that it accepts its 3 configuration
settings directly, rather than forcing the caller to pass in a
configuration data structure.
Change-Id: Ic0bd1b94f1a1c8e0f8a84b3bd3677d59d0708734
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
PM control function is used only by the PM subsystem. Update
documentations to make it clear and name the relevant structures and
functions with _pm_ in the name.
Jira: ZEP-1044
Change-Id: I29e5b7690db34a228ed30a24a2e912e1360a0090
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Needed to resolve various undeclared symbols when SYS_POWER_MANAGEMENT
is enabled.
Jira: ZEP-1073
Change-Id: I21db2580efb15c80d84d9163fe9e8245d6dc0391
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Moves the source code for ring buffers to the 'misc' area, since
it isn't really a central component of the kernel. (This also
aligns the ring buffer source code with its include file, which
is already under 'include/misc'.)
Change-Id: I765a383a05f51fa67d154446f412496e689f9702
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Add 'legacy_' prefix, as per the revised naming convention.
Change-Id: I0eaff33a561523ad11621b3104862c574930556e
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Since the unified kernel's build system doesn't properly handle
a file in the 'legacy' directory if it contains an initialization
function, some legacy code can't be located there. To avoid confusion,
the revised convention for legacy code is to keep any file that
contains only legacy code in the main kernel directory, and to give
it a "legacy_" prefix.
Change-Id: I019adc8f36611d4481bdcf31dde66597d4cf54ae
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Ensures that all APIs which accept a timeout value wait for at least
the specified amount of time, and do not time out prematurely.
* The kernel now waits for the next system clock tick to occur before
the timeout interval is considered to have started. (That is, the only
way to ensure a delay of N tick intervals is to wait for N+1 ticks
to occur.)
* Gets rid of ticks -> milliseconds -> ticks conversion in task_sleep()
and fiber_sleep() legacy APIs, since this introduces rounding that
-- coupled with the previous change -- can alter the number of ticks
being requested during the sleep operation.
* Corrects work queue API that was incorrectly shown to use a delay
measured in ticks, rather than milliseconds.
Change-Id: I8b04467237b24fb0364c8f344d872457418c18da
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Provides users with a more compact and intuitive API for kernel
timers.
Provides legacy support for microkernel timers and nanokernel
timers by building on the new kernel timer infrastructure.
Each timer type requires only a small amount of additional
wrapper code, as well as the addition of a single pointer
field to the underlying timer structure, all of which will be
easily removed when support for the legacy APIs is discontinued.
Change-Id: I282dfaf1ed08681703baabf21e4dbc3516ee7463
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
- Reorders parameters where necessary
- Adds alignment parameter to K_MSGQ_DEFINE() for buffer alignment
- Renames parameters where necessary so they are more intuitive
Change-Id: I0b53105c04109127897bf4790e6908082f82da4e
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Now invokes any microkernel-level init functions used by
legacy applications.
Change-Id: I8f68ddba764f13d037a679b74121713983f4aaba
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
K_THREAD_DEFINE() can no longer specify a thread group. However, it now
accepts a 'delay' parameter just as k_thread_spawn() does.
To create a statically defined thread that may belong to one or more thread
groups the new internal _MDEF_THREAD_DEFINE() macro is used. It is only used
for legacy purposes.
Threads can not both have a delayed start AND belong to a thread group.
Jira: ZEP-916
Change-Id: Ia6e59ddcb4fc68f1f60f9c6b0f4f227f161ad1bb
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Tweak mailbox API parameters so that not only are their descriptions
correct, but their names match across header file and C file.
Change-Id: Ieeb3a40fb7c535a5eac2e06533d01d13aaf69181
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
- Reorders parameters where necessary
- Adds alignment parameter to K_PIPE_DEFINE()
- Renames parameters where necessary so they are sync'd
between header and source files
Change-Id: I4f2367abc28aff646cc90beb9f08bb266e143b0c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Reverts a change that was made to the defragmentation routine
when memory pool support was ported from the microkernel to the
unified kernel.
The change was intended to improve the readability of the algorithm,
but introduced a subtle change in behavior. For example, when
k and i are zero and the number of block set entries is one
the original algorithm did not execute the while loop, while the
revised algorithm executed the loop once.
Change-Id: I2b0263a8d7b80846013c459847817d314f803457
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Build breaks when enabling CONFIG_NEWLIB_LIBC because it has its own
sched.h file.
This is a bad symptom of a greater issue: the build system passes many
'-I<path>' options to the compiler, and that allows including header
files by simply specifying their names (when located somewhere else than
<zephyr>/include/) and can cause clashes when several files in different
locations have the same name, like in this case.
Fixes ZEP-1062.
Change-Id: I81d1d69ee6669a609cd0c420b1b8f870d17dcb67
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Gets rid of official support for dynamic timer allocation
in the unified kernel, since users can easily define and
initialize timers at any time. Legacy support for dynamic
timers is maintained for backwards compatibility reasons
for the time being ...
Change-Id: I12b3e25914fe11e3886065bee4e96fb96f59b299
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Folds this API into k_stack_init() to provide a single API
that requires the caller to pass in the stack buffer, just
as is done for other kernel objects initialization APIs
involving the use of a buffer.
Change-Id: Icad5fd6e5387d634738d1574f8dfbc5421cd642d
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
* Gets rid of k_current_priority_get(). Users can just call
k_thread_priority_get(k_current_get()) instead.
* Declares k_thread_priority_get() in kernel.h, where it
really belongs.
* Removes duplicate declaration of k_thread_priority_set().
Change-Id: I616ae6f2e06c95ecba3b92324186b3fa29162fd1
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Do not include timeout_q.h when !SYS_CLOCK_EXIST, this allows removing
_unpend_thread_timing_out() in that case.
Have _abort_thread_timeout() return 0 (success) when !SYS_CLOCK_EXIST.
With this change, the minimal footprint nanokernel project compiles for
the unified kernel.
Change-Id: Ifbf9167a82fb3ebcf6941bf3f85c105c23c9060c
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
It is always needed by the kernel, since the return codes are now
errnos. CONFIG_ERRNO is the mechanism for having a per-thread errno, not
using errno values.
Change-Id: I4ed14896a342f4122793d91b13c41b4a6a74716d
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Timers are based off timeouts now, which can only be enabled when the
system clock is enabled. So the three are really just one setting now.
Keep the NANO_TIMERS and NANO_TIMEOUTS around for now until all
middleware that rely on them is updated. They are always enabled when
SYS_CLOCK_EXISTS is enabled.
Change-Id: Iaef1302ef9ad8fc5640542ab6d7304d67aafcfdc
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
- ensure dummy thread's stack is aligned
- rename nano_init() to prepare_multithreading
- move _Swap() to main thread into its own function
Change-Id: I6c8dbe2a4e034f3db90b55d1a5e30bc73bac3d50
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Rename remaining functions to fit with kernel naming convention for
internal interfaces. Use struct k_thread instead of struct tcs.
Change-Id: I28cd7f6f4d7ddaeb825c8d2999242d8d2dd93f31
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Integrate _timeout_remove_tcs_from_wait_q() into
_unpend_thread_timing_out().
Change-Id: Id57d9fd8f9e877e580460091172aaabf451f3d4b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Rename _do_timeout_add to _add_timeout, rename _TIMEOUT_ADD to
_add_thread_timeout to better reflect their functionalities. Have the
latter call the former, remove _do_timeout_add and
_nano_timer_timeout_add.
Change-Id: Ica86bea10d99d72bf78379598a942d277e7002d0
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Rename _do_timeout_abort to _abort_timeout, rename _timeout_abort to
_abort_thread_timeout to better reflect their functionalities. Have the
latter call the former, remove _do_timeout_abort and
_nano_timer_timeout_abort.
Change-Id: I0fea9474b19a2eb47a37489eb06c0d1d56886c9c
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
When adding a thread to the ready queue, it is often known at that time
if the thread added will be the next one to run or not. So, instead of
simply updating the ready queues and the bitmask, also cache what that
thread is, so that when the scheduler is invoked, it can simply fetch it
from there. This is only done if there is a thread in the cache, since
the way the cache is updated is by comparing the priorities of the
thread being added and the cached thread.
When a thread is removed from the ready queue, if it is currently the
cached thread, it is also removed from the cache. The cache is not
updated at this time, since this would be a preemptive fetching that
could be overriden before the newly cached thread would even be
scheduled in.
Finally, when a thread is scheduled in, it now becomes the cached thread
since the fact that it is running means that by definition it was the
next one to run.
Doing this can speed up considerably some context switch times,
especially when a thread is preempted by an interrupt and the same
thread is scheduled when the interrupt exits.
Change-Id: I6dc8391cfca566699bb9b217eafe6bc6a063c8bb
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
When fetching the next thread to run, we know at least one thread is
available.
Change-Id: I568c33a61b6a0a6d6a7f79c337caecffd5ef70b6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
As the unified kernel should replace the nanokernel and microkernel
lets go ahead and move code shared between the nanonkernel and unified
kernel into the unified kernel.
Change-Id: I8931efa5d67025381d5d0d9563e7c6632cece87f
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If you select the BOOT_BANNER on its own, nothing happens and
you are left to wonder what is going, it happens very early in
the boot process and requires very early console initialisation.
Change-Id: Id548491f7e3f7f399ddc572199ce39e6fc268ed4
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Make sure that kernel/unified, that is included in libs-y does not
built recursively through building kernel/ directory.
Make sure that any lib.a library is not included into libzephyr.a
and thus object modules from those lib.a files are linked only if a
function from that object module is referenced from the application.
Jira: ZEP-1025
Change-Id: Id3a3e96ca0b8abc9aedde0ffb9baa0164e380464
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Simplified some documentation, removing inconsistencies and making
it easier to understand by separating PM infrastructure areas and
soc specific components that implement the hooks.
Removed the DEVICE_SUSPEND_ONLY policy as it is redundant and
causes high complexity in the flow. It is also not practical
to use it because it was meant to be used without doing CPU or SOC
low power state operations. This means it would do device PM
operations in the ISR of the system timer used by the scheduler.
This can disrupt the scheduler time.
Added a check of a flag around the notification sent from the ISR
of the wake event and created APIs to set/clear it. This will
allow disabling the notification when not needed from
_sys_soc_suspend().
Jira: ZEP-972
Change-Id: Id7aa7d2683384eabed518d4efac446ecc84c3498
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Simplifies k_msgq_purge() at the expense of making the case of an
already empty message queue a little slower.
Change-Id: I8fafd6d49233efbf23b95d171f81bf795e828454
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
This adds k_work_pending which can be use to check if a k_work is
pending execution.
Change-Id: Ifd56e8d65d555c7e9722c547fe83e13e886d63cd
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds nano_work_pending which can be use to check if a nano_work
is pending execution.
Change-Id: Iae0492a750de93fcd7e89e3a2e74509ffce4983b
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Obtained from device.h, which includes microkernel.h when building for a
microkernel system.
Caught by LLVM.
Change-Id: I98a00269b2b6cb38c851b176323de1228d65603d
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Replaces it with a pointer as there is no need for an opaque memory
pool type.
Jira: ZEP-916
Change-Id: I5493eed25c9c34e1b850dc3b20699864edb22d28
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Moves the following internal thread group APIs from the public
kernel.h header file to the more private thread.c source file as
they do not need to be public APIs.
_k_task_list_start[];
_k_task_list_end[];
_FOREACH_STATIC_THREAD()
is_in_any_group()
Change-Id: I0b731fb0c20a5574cb1b3c1397803af82918d69d
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Currently passing a constant string (other than a string
literal) to device_get_binding() generates a spurious warning.
The warning is spurious because device_get_binding() does not,
nor is it ever likely to, modify its argument. To fix the
warning we modify the prototype to make clear name will never
be modified.
Change-Id: I2df22de61eb2580b2086a685549900d7ed4a322d
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Building kernel objects as a static library allows not
to include the initialization function for an object
type if this type is not used by the application.
It reduces memory footprint
Change-Id: I2b3c79cb2591fdd1ce15d27684c4a874e759c559
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
The separate initialization priority provides more
flexibility when it's needed to arrange the initialization
sequence.
Change-Id: Ie1b7b48d282618f6d641320bf3b24f63716a7342
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Simple conversion from ticks for now.
Change-Id: Ib81fc738d45641a6a3a88d2adec1f3eb861f3f97
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
There is no reason to check if the idle thread is a cooperative thread
before invoking k_yield(); it is safe to unconditionally invoke it every
iteration.
Rationale: If the idle thread is cooperative, k_yield() must be invoked
to allow a new thread to get scheduled to run. If the idle thread is
preemptive, then k_yield() effectively becomes a no-op.
Change-Id: Ide3204c92381640b5d12b39ca0f258d56d8cc3d0
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The routine _nano_get_earliest_deadline() is still used by both
the microkernel and nanokernel.
Change-Id: I14501e6d41ca5faac27dead5873ef897e79831aa
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Removes the following wait_q.h macros
_NANO_OBJECT_WAIT()
_TIMEOUT_UPDATE()
_TIMEOUT_TICK_GET()
Change-Id: I7cb78728aaad74acf7f121c79f03d32fa6af5aac
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Replaces _nano_get_earlist_deadline() with the more streamlined
routine _timeout_get_next_expiry().
Change-Id: Iee7ec727f0500cb28e37a364036fd40a483b40c3
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
For unified kernel the routine is implemented through
a wait queue.
Change-Id: Iceab7b821e3b55e0773ad780f4b9b0a1dfc21f5d
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
The routine _reschedule_threads() does not need to check that the
scheduler is locked as this is done as part of _must_switch_threads().
Change-Id: I701b811512836eef591b2adcd708991ec9324b3d
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Most apps run fine with static k_timer objects. Don't pay the cost
for the timer pool if no one asks for it.
Also turn off the allocate/free API in the header if it can't possibly
work at runtime as it's an obviously-detectable error that would
otherwise be visible only at runtime.
Change-Id: I492e6e01c4213e3544f707247eea6e4bc601fefd
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The K_<obj>_DEFINE macros in the unified kernel create objects of name
'name', and not a pointer named 'name' to an object. Some macros
contained the code from early prototyping.
Change-Id: I7262570fbe0b267012874eac0185b4e0cd7f523d
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Have one function that can be used for all possible device
purposes using a control code instead of the suspend
resume functions, makes it generic for device control.
Added device power states.
The older replaced APIs will be deprecated in a future patch
Jira: ZEP-954
Change-Id: I6dd3ebfd0fde3546b2d8397f19842f5758fda0c4
Signed-off-by: Amir Kaplan <amir.kaplan@intel.com>
Due to the memory pool structure only static declaration of
memory pool is possible.
Change-Id: I4797ed88fd2ac3b7812ff26e552e1745611c4575
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Semaphore groups are enabled by default. Disabling them will both
decrease the footprint as well as improve the performance of the
k_sem_give() routine.
Change-Id: If6c1b0e2e1f71afd43e620f05f17068039d12b05
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The routine _is_next_thread_current() checks if the current thread
is still the highest priority thread that is ready to run.
It is useful for determining if a thread must be swapped out when
timeslicing is in effect.
Change-Id: Ide7b89742a64f6082ca4c679a4b2fbd60792e30f
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Added needed kconfig options. KERNEL_V2 selects MICROKERNEL to allow
middleware and application that differentiate between NANOKERNEL and
MICROKERNEL to run unmodified.
Build the unified/ kernel directory: do not touch the
nanokernel/microkernel directories.
Invoke sysgen for both microkernel and unified kernel. Only have sysgen
reference include/microkernel if building an original microkernel.
Change-Id: If74779146143434f7ee274bbef32d6c894b9f1a1
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Easier to build logic for when an MDEF file is to be parsed since
unified kernel needs to do it as well. Can also be useful for testing,
when toggling between static and dynamic objects in the same test case.
Change-Id: I51eb8919e18443516ade13caab04698d37d91803
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
These impede debugging and we have CONFIG_OMIT_FRAME_POINTER
now which does this globally for the entire kernel.
Change-Id: I46939223e27dd298ca3ed162ff5790cb2e9ed2a2
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Initialization code in nano_init.c gated by the config parameter
CONFIG_CUSTOM_RANDOM_GENERATOR is out of step with the rest of the
tree where support for this config parameter was removed by
commit 27bcb431cb ("Random number generator driver unification")
Change-Id: If6086fd85e61579c646d09029ef129e8a3b464b8
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Completing the terminology change started with change 4008
by updating the Kconfig files processed to produce the
online documentation, plus header files processed by
doxygen. References to 'platform' are change to 'board'
Change-Id: Id0ed3dc1439a0ea0a4bd19d4904889cf79bec33e
Jira: ZEP-534
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
This reverts commit d73a9bb9c6.
The patch was intended for 1.6.0 release.
Change-Id: Id42058b746a3d2a54e4b1a2983eb58bd10b1ed40
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
An updated version of ARC GCC reports this error:
nano_init.c:340: Error: inappropriate arguments for opcode 'mov'
The offending in-line assembly code tried to move register value into a
memory location.
Use store "st" instruction instead of "mov" istruction to store
a value in memory.
Change-Id: I91ebd20495612da4d5639a3ef848379705f6dedd
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
If the delayed work FIFO never goes empty (e.g. because the work
callback keeps resubmitting or there's a very active ISR feeding items
there) then the fiber would never yield, causing all sorts of problems
for the system. Adding an explicit fiber_yield() call at the end of
the while-loop solves the issue.
Change-Id: I233b9fc18fc9db9172daf8689bd22d09952089cb
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Eliminates assert check that complains about an attempt to allocate
a memory pool block larger than the largest possible block size.
In such cases the allocation code now just returns a NULL pointer
indicating that it was unable to allocate the requested block, just
as it does when a block smaller than the maximum size cannot be
allocated because none is currently available.
Note: One scenario in which it isn't unreasonable for an application
writer to request a block that is too big is the case where a receiving
task using a mailbox first receives an excessively large message without
its data and then tries to retrieve the data into a memory pool block
allocated by the mailbox. Rather than forcing the application writer
to check to see if the size of the received message is too big for the
memory pool, or adding code to the mailbox subsystem to do such a check,
it's easier to pass on the request to the memory pool and simply have it
return NULL, which causes the mailbox to report that data retrieval
failed. The application can then perform a single check that catches
both the case where the memory pool simply ran out of blocks and the case
where it didn't have any block big enough to handle the message.
Change-Id: Ifd2cdd8a5927b93d3e9c5df301544e522131d2c6
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The interrupt stack pointer is now aligned, and we error out if
the sizes of the interrupt and main task stacks aren't a multiple
of the stack alignment.
Change-Id: I2a70c82fc94e25cc6c7a9d5ec165bf2370b8a166
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Arches now select whether they want to use the GCC built-ins,
their own assembly implementation, or the generic C code.
At the moment, the SDK compilers only support builtins for ARM
and X86. ZEP-557 opened to investigate further.
Change-Id: I53e411b4967d87f737338379bd482bd653f19422
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Jira ZEP-68,zephyr.elf shows duplicate routines which increases the foot print.
Current fix removes duplicate routines and reduces foot print of the image
Change-Id: I01a2e5a8a02481ab33a2bb09e9c545d6879c1b81
Signed-off-by: tulasinagraj <tulasi.r@tcs.com>
Improves a handful of comments, and removes some unneeded blank lines.
Change-Id: Ia2b951d23131b0080104c18c06324342de3359ef
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Revises two fields of the memory pool structure to better reflect
that block sets are involved.
Change-Id: I44a751e7457270391fbe99705010345448df2ff4
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Revises the memory pool block set field that points to its array
of quad-blocks to better reflect that quad-blocks are involved.
Change-Id: I159805ce8eee9091221cb1f494a4ab082e3736e5
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Revises the names of 2 types to make them better reflect the
data structures they represent, namely:
- block set: a collection of memory pool blocks of a given size
- quad-block: four contiguous memory pool blocks of a given size
Change-Id: I3e424586e97157eea185fba6836e2e89d10d9cd6
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Eliminates the memory pool field indicating the size of the
pool's memory buffer, since it isn't used anywhere.
(Anyway, it could be computed by multiplying the maximum
block size by the number of maximum-sized blocks.)
Change-Id: Ia11554bdc2b246a1ba0ea33f05c5e6ce6a32ca13
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Alters the use of the field so that a 1 bit indicates that the
associated block is available (i.e. can be allocated from the pool),
and a 0 bit indicates the block is unavailable (i.e. it is already
allocated or does not exist).
The revised definition of this field is more intuitive, since it follows
the conventional "1 = thing is present, 0 = this is not present" model.
Change-Id: Id133d1940aca0dd1c3c1672f989d0c0bb083ebc5
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
No longer initializes the quad-block descriptors for block sets,
except for the one containing the largest size blocks. The descriptors
for the other block sets don't need initialization since sysgen already
ensures the block pointer field is NULL, and the block status field can
be anything (since it is ignored if the pointer is NULL).
Change-Id: I72cdf772329ef3e6d1babd9da11706d11611e61a
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Adds missing check to prevent defragmentation algorithm from
going past the end of a block set's array of quad-blocks.
Optimizes quad-block deletion algorithm so that it simply moves
the final array entry into the slot for the deleted entry,
rather than shifting all of the entries in between them.
Also enhances comments to make it easier to understand
what is going on.
Change-Id: Ic281c6f3c6dd5df9ec532a302b4103f3d929665b
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Now use a standard routine for identifying which block set to use,
rather than duplicating the identification code in multiple places.
Change-Id: I2f6577879c23183f3f91e4418d1ea0b2f6eec184
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Revises algorithm to call an existing routine to free an allocated
block, rather than duplicating the logic to do the freeing.
Also enhances comments to make it easier to understand what is
going on.
Change-Id: Ie7a83a8a2e978e8a685c27e07acb5b70aea37afa
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Revises algorithm for deallocating an existing block to make it
more compact (and efficient). Address calculation is simplified
and unnecessary error checking is removed (& replaced by asserts).
Also enhances routine name and comments to make it easier to
understand what is going on.
Change-Id: If1803ee09c8f4f73693c0cff9e433a7938f14398
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Enhances comments to make it easier to understand what is going on.
(Doesn't change actual defragmentation algorithm.)
Change-Id: I294f55b8f233d88c01ce30ba9ccff88000dc7936
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Enhances routine name and comments to make it easier to understand
what is going on. (Doesn't change actual allocation algorithm.)
Change-Id: I7d982ed8eeda3a2edd4602c5a10003aa8532457d
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Revises algorithm for allocating an existing free block to make it
more compact (and efficient) by using the same logic to handle the
allocation of any block within a quad-block.
Also enhances routine name and comments to make it easier to
understand what is going on.
Change-Id: I55ca513e6f85df2b548502262e4dbe6bb272596b
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Converts check for a request for an impossibly large block
from a run-time check to an assertion. (The run-time check logic
was faulty anyway, since an excessive request would result
in a negative value for "offset", which would then get used
as an array index!)
Also enhances comments to make it easier to understand what is
going on.
Change-Id: I3faa86be177dcbc76912e23fabc2d24724fcba18
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Makes a couple of minor optimizations to initialization algorithm:
- Now initializes block status array for largest size blocks once,
rather than twice.
- Doesn't initialize "count" field of block size descriptors to zero,
since sysgen ensures that this happens automatically.
Also enhances comments for initialization routine to make it easier
to understand what is going on.
Change-Id: I00d907c0f2a86f5b6ea8a63475b40074fe89357c
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Eliminates memory pool field associated with a capability that was
never implemented. (This field was initialized, but never subsequently
referenced.)
Change-Id: I58cf8c4bb846a66b4c8754654ffc3ff55abcff7f
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Used by ARC, ARM, Nios II. x86 has alternate code done in assembly.
Linker scripts had some alarming comments about data/BSS overlap,
but the beginning of BSS is aligned so this can't happen even if
the end of data isn't.
The common code doesn't use fake pointer values for the number of
words in these sections, don't compute or export them.
Change-Id: I4291c2a6d0222d0a3e95c140deae7539ebab3cc3
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We now allow use of -mgpopt=global and -mgpopt=data. The 'global'
option is now the default instead of compiler-default local, expanding
global pointer usage to all small data in the system.
For systems where all RAM is less than 64K, the 'data' option may be
appropriate.
Some fixes had to be made to the system in order to get around some
issues:
* prep_c.c no longer uses fake linker variables to figure out the size
of data or BSS, as these gave the linker fits as it tried to compute
relative addresses to them.
* _k_task_ptr_idle is create by sysgen and placed in a special section.
Any small data in a special section needs to be declared extern
with __attribute__((section)) else the compiler will assume it's in
.sdata.
* same situation with extern references to k_pipe_t (fixed pipe_priv
test)
For legacy applications being ported to Nios II which do things that
freak out global pointer calculation, it can be disabled entirely.
Change-Id: I5eb86ee8aefb8e2fac49c5cdd104ee19cea23f6f
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Introduce the family of nano_fifo_put_list and nano_fifo_put_slist APIs,
which allow queuing a list of elements on a nanokernel fifo in one
shot. When called from an ISR or a fiber, the behaviour is not really
different than calling nano_fifo_put for each element to enqueue.
However, when called from a task, it allows the task to enqueue the full
list without yielding to fibers that were waiting on the fifo.
All fibers currently waiting on the fifo will be awakened and given an
element from the list in their order of priority. When some elements are
not matched with a receiver, they are queued normally.
There are two ways of passing a list: with either an ad-hoc queue, by
passing the head and the tail elements, or with a sys_slist_t object.
For the latter, the object must be reinitialized afterwards.
Change-Id: I6ac077f556dc39995191e9149c4a047a3433826f
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
It is now safe to introduce the callback since nano_timer_init now
calls _nano_timeout_init which does takes care of initializing all
the fields properly.
Change-Id: I5735eeebef233a0a541ec8b2a354b65da98082fc
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
With the introduction of _nano_timeout_init it prefered to call it
to initialize the _nano_timeout fields properly.
Change-Id: I83e9c63f9bb2903c508264d1199d2c687c330ec8
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This will allow initializing a nano timeout that is not associated with
a thread.
Change-Id: Ic71175b0059396b19a0e3616f4fab570071c3d48
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a delayed version of nano_work API which is useful when
handling timeouts since the same stack/workqueue can be shared.
Change-Id: Iac43796fe96deb0a9c8976c91a65104b57779b00
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Convert leading whitespace into tabs in Kconfig files. Also replaced
double spaces between config and <prompt>.
Change-Id: I341c718ecf4143529b477c239bbde88e18f37062
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
By default, kernel event logger is using the system timer. But on
some platforms where the timer driver maintains the system timer
cycle accumulator in software, such as ones using the LOAPIC timer,
the system timer behavior leads to timestamp errors. For example,
the timer interrupt is logged with a wrong timestamp since the HW
timer value has been reset (periodic mode) but accumulated value not
updated yet (done later in the ISR).
This patch is adding the possibility to register a timer callback
function that will be used by the kernel event logger. For example,
on Quark SE, this allows using RTC or AON counter which accuracy is
sufficient and behavior more straight forward compared to system
timer.
Change-Id: I754c7557350ef29fc10701e62a35a5425e035f11
Signed-off-by: Fabrice Olivero <fabrice.olivero@intel.com>
This adds a callback to struct _nano_timeout which is called in ISR
context allowing more flexible handling of timeouts.
Change-Id: If837b0b51b24dfffebac6f99f4d66fdf01c164f0
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Overflowing the k_server command stack will now trigger an __ASSERT()
when CONFIG_ASSERT=y.
Change-Id: Icf6f4242ab8a9897918769415a0f7485602d7630
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Add a generic API for drivers to start workqueues and submit work
items. This is needed by drivers which need to schedule code that might
sleep from an ISR to run in fiber context.
Also add the option to start a system-wide workqueue.
Both additions are optional. They can be deactivated for systems that
do not need them.
Change-Id: Ia843568fde5daf6d4279ef7bf241c26c1e3dcfb7
Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
Moved comments from code to header.
Jira: ZEP-160
Change-Id: Ifd0f3c930289256e682b5941d77433aca3d3f941
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Added CONFIG_KERNEL_EVENT_PROFILER_DYNAMIC flag for enabling that
capability. When set, nothing will be logged by default
Change-Id: I03552483e5a6bfd9e2505eda56908f0d0ae98618
Signed-off-by: Fabrice Olivero <fabrice.olivero@intel.com>
OS tick period (usually 10 ms) is not sufficiently precise for task
execution analysis (like processing CPU load per context)
With that modification, the timestamp used by the kernel event logger
is 32-bit LSB of platform HW timer (for example Lakemont APIC timer
for Quark SE).
This timer period is very small and leads to timestamp wraparound
happening quite often (e.g. every 134s for Quark SE).
This wraparound must be considered when analyzing kernel event logger
data and care must be taken when tickless idle is enabled and sleep
duration can exceed maximum HW timer value.
Change-Id: Idc545da8f828a7357a69d83ff25c9afd09dab3c4
Signed-off-by: Fabrice Olivero <fabrice.olivero@intel.com>
Add a way of finding if a microkernel task is the idle task instead of
of duplicating:
task_priority_get() == (CONFIG_NUM_TASK_PRIORITIES - 1)
which could be subject to change.
Only available for microkernel, since there is no such concept in the
nanokernel.
Change-Id: Ie8930981f1a2ac5ff16f905f4eb4e333c8b59c5d
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
In order to build test/kernel/test_stackprot/microkernel for the ARC,
the _MOVE_INSTR needs to define what the move instruction is for this
target.
Change-Id: I087cc5baa4c41297ce52323556e94aab424aa891
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Locks interrupts in the microkernel routines _k_state_bit_reset() and
_k_state_bit_set(). This is a necessary pre-requisite for allowing
microkernel objects to pend on nanokernel objects since that feature
will require the manipulation of the microkernel queues in the context
of an ISR as well as the kernel server fiber.
Change-Id: I2d263707e0d3aed75bba971df878daa3d7ae1d11
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds support that allows fibers and ISRs to invoke the microkernel
no-op kernel service request. This is useful for cases when the
nanokernel needs to invoke the microkernel task scheduler.
Change-Id: I1f4b2a39ac6b5e44bb1b6c6b3cd6034262bbada8
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Fixes the timeout recalculation in the following routines:
nano_task_fifo_get()
nano_task_lifo_get()
nano_task_sem_take()
_nano_task_sleep()
Without this fix, a task that called one of the previously listed
routines could in theory sleep/wait up to almost twice the requested
timeout.
Change-Id: I53196be84e65874e94a62d5b0be1b7aaaaeda91f
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds the nanokernel infrastructure to permit microkernel tasks
to block/unblock on nanokernel objects. Multiple tasks may wait
on a nanokernel object's dedicated task wait queue.
It is important to note that when data is posted to the object
all the tasks on that object's dedicated task wait queue may be
woken up but the data is not immediately given to any of the tasks.
This is done to maintain consistent behavior with the nanokernel
as in a nanokernel system, fibers are given preference in both
waiting on and getting data from a nanokernel object.
Change-Id: Ia5c7f21ae59a367d9fec23dafc3a918d9e767db5
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds the microkernel infrastructure to permit a microkernel task
to [un]block on a nanokernel object. Unlike tasks that [un]block
on microkernel objects, the work for [un]blocking tasks on nanokernel
objects will not always be done in the kernel service fiber. One of
the repercussions of this is that in many cases the microkernel task
scheduler must be explicitly invoked (by issuing a no-op kernel
service call).
Origin: Original
Change-Id: I2b145668cef142a7a4034e191116fcb344a9b8b3
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Fibers initialize this back pointer to NULL as they are (by definition)
not microkernel tasks. Microkernel tasks initialize it to their
corresponding 'ktask_t'.
However for nanokernel systems, the back pointer is always NULL. This
is because there is only one task in a nanokernel system (the background
task) and it can not pend on a nanokernel object--it must poll.
Change-Id: I9840fecc44224bef63d09d587d703720cf33ad57
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds the TF_NANO wait flag reason to indicate that a task is pending
on a nanokernel object.
Change-Id: Ic20ef79398da7d9118bdf775e22b8f8a31501f7f
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
We really should have more faith in the compiler, it generates
code to implement this exactly like the arch-specific assembly
versions, and on ARM is actually 4 bytes shorter.
FUNC_NO_FP used to disable the usual C preamble to update the
frame/stack pointers, which is how the sizes are still the same
or less. It's debatable how useful the occasional use of
FUNC_NO_FP is in practice since it hinders debugging and in a
production build frame pointers should be globally disabled, but
we can address that later.
Change-Id: I6c4b64ab3e3a9b6f91d52fa8c92e6e79a986fc77
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Of the 3 related functions;
_thread_essential_set()
_thread_essential_clear()
_is_thread_essential()
The first two are parameter-less and always operate on
"_nanokernel.current". The last one takes a 'thread' parameter but will
operate on _nanokernel.current if the parameter is NULL. All calls to
_is_thread_essential() pass NULL!
This change makes the 3 functions consistent by removing the parameter
to the 3rd function. This should also be marginally more efficient,
though consistency was the motivation. This change corrects the doc
preamble to all 3 functions.
(These functions would probably be better as inlines. Also, the choice
of when to use wrappers seems a bit arbitrary. E.g. there's nothing
for setting/testing the "FIBER" flag.)
Change-Id: Ie3589f8a28b227c6d7a3a31b664d3b3e6e9c6d17
Signed-off-by: Geoff Thorpe <geoff.thorpe@nxp.com>
This wrapper exists so that the ESSENTIAL bit doesn't have to be set
explicitly in _nanokernel.current. (And a note is added to nano_init to
avoid a nasty gotcha there.)
Change-Id: I4026ac0cfeace60e36abdbccf15554759f2dbf7a
Signed-off-by: Geoff Thorpe <geoff.thorpe@nxp.com>
These C variants of atomic operations can work on any arch,
have platforms select them if they don't have ASM equivalents.
Change-Id: I38eb03bb58beff865681ee56ef7bc0fcded1e906
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The file device.c uses errno codes so it should include errno.h.
Change-Id: I93e806a9b20b2c9bcb245ac5e86fba70486c9591
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Certain Low power SOC states (e.g. deep sleep) will result in device
IP blocks losing state. In such a scenario it can be useful to have
a mechanism for devices (driver code) to signal the power manager /
policy that they are in the middle of a transaction.
We expect the device driver code to make a call to
device_busy_set(device *) before initiating a transaction and
device_busy_clear(device *) on completion. It is expected that device
driver developers will add this as necessary in their drivers.
Further an API is provided for power manager application / policy to
check this. Based on this the power manager / policy can decide
whether or not to go into a particular power state.
Change-Id: I0fedd90b98e182cd41b53c7f9e08655532822faa
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
This changes the behavior of device_get_binding() so that
it returns NULL if driver_api is not set. This provides
a way for driver to state that it has not been initialized
properly, and prevents app from using it since no reference
to the device struct will be returned.
This implements the idea specified in [1]. The idea is to
reuse an existing resource by piggy-backing onto driver_api,
thus avoiding an extra "device state" variable in the device
struct. This differs from the code specified in the mailing
list by checking driver_api for NULL first. This avoids
the unnecessary strcmp() if driver_api is NULL.
[1] https://lists.zephyrproject.org/archives/list/devel@lists.zephyrproject.org/message/MZB5PYBSRHV3NIEHJYXYQVLTPFIIHPB3/
Change-Id: I978b1a6683cd56c8a72532d6368c47e67515c82d
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Fixes a problem where the nanokernel FIFO state information could get
out of sync due to a timeout.
The nanokernel FIFO structure nano_fifo now maintains two separate
queues: one for waiting fibers and the other for posted data. This
permits the safe and independent querying of the queues as needed
when getting and/or putting data from/on the nanokernel FIFO.
Change-Id: Ifbcb5004558b06fc55cad2a955f5be20e716b392
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Device drivers may use task_sleep() routine during the initialization.
As device driver initialization is carried by idle task, it can not
be sheduled out as any other task. Idle task goes into a wait loop
instead.
In order to invoke task_sleep() device drivers must enable
CONFIG_NANO_TIMEOUTS option.
Change-Id: Ib73a2ad1f3c0bda44c24f2417e102bfaa3a13a15
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Most of the SoC and board Kconfig use the same values for
driver initialization priorities. So refactor them, and
discard duplicate ones.
The shared IRQ init priority was changed so that the kernel
default init and device init priorities can be standardized
across all SoC/boards. Same goes for DesignWare SPI driver.
This also changes the UART_CONSOLE_PRIORITY and
IPM_CONSOLE_PRIORITY to UART_CONSOLE_INIT_PRIORITY and
IPM_CONSOLE_INIT_PRIORITY, to standardize across all drivers.
Note that this does not take away the ability to override
those values. This just provides reasonable defaults such
that there is virtually no need to override.
Change-Id: Ibbd95d802c637df06f9a2fd48763ee1e6f4ff627
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
There are two major issues with the kconfig:
() Some of the config options have incorrect dependencies inside help
under menuconfig. For example, CONFIG_GPIO depends on BOARD_GALILEO.
() Since the SoC and board specific kconfig files are parsed first,
the help screen would say, for example, CONFIG_SPI is defined at
arch/arm/soc/fsl_frdm_k64f/Kconfig. This is incorrect because
the actual config is defined in drivers/spi/Kconfig.
These cause great confusion to users of menuconfig/xconfig.
To fix these, the SoC and board defaults are now to be parsed last.
Note that the position swapping of defaults in this patch is due to
the fact the the default parsed last will be used.
And, spi_test is broken due to the fact that it requires
CONFIG_SPI_INTEL_PORT_1, but never enables it anywhere. This is
bypassed for now.
Origin: refactored and edited from existing files
Change-Id: I2a4b1ae5be4d27e68c960aa47d91ef350f2d500f
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Added device power management hook infrastructure. Added
DEVICE_INIT_PM and SYS_INIT_PM macros that creates device
structures with the supplied device_ops structure containing
the hooks.
Added example support in gpio_dw driver. Updated the sample
app and tested using LPS and Device Suspend Only policies.
Change-Id: I2fe347f8d8fd1041d8318e02738990deb8c5d68e
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Changed names of Kconfig flags, variables, functions, files and
return codes consistent with names used in the RFC. Updated
relevant comments to match the changes.
Origin: Original
Change-Id: Ie7941032d7ad7af61fc02928f74538745e7966e8
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add support for task_sleep() and fiber_sleep() during the
system initialization. When CONFIG_NANO_TIMEOUTS defined,
before the k_server() starts, kernel uses nanokernel
system clock announce and task sleep functionality.
To give device drivers early sleep functionality, the system
clock has to start on SECONDARY initialization level, same
as most of the drivers.
Change-Id: Ie1d391945cd1cfb9a5dc199783c2d224eb1b0ef3
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
have micro and nano kernel next to eachother.
JIRA: ZEP-107
Change-Id: I8d6e4354cf6a8cdf1193c641b112a078cd7ec460
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
KERNEL_EVENT_LOGGER selects EVENT_LOGGER which is then used to
enabling building. Skip EVENT_LOGGER and use KERNEL_EVENT_LOGGER
directly.
Change-Id: Ib9cf3a58b12bf4e78f264d8e8ac48a8104120c3b
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add missing option for adding time stamp to boot banner.
Change-Id: Idda61feeef4a89c1aa8bb7e81b52272babeb1efe
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Microkernel timers are defined at compile time as a static list
but they are allocated dynamically in kernel execution.
The object tracing list will only list those timers that are
currently allocated at debug time. For this reason, timers
can be removed from the tracing list at any time.
A very simple double linked list was implemented to reduce the
complexity of the action to remove an item from the list from O(n)
to O(1) and simplify the remove implementation.
Change-Id: Ib7ea718b52e7c719a32b3fa4ff1d7e6b00482c28
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
The thread monitor allows to iterate over the thread context
structures for each existing thread (fiber/task) in the system.
Thread context structures do not expose thread entry information
directly. Although all the information can be scavenged from memory
stacks. Besides, accessing the information depends on the stack
implementation for each architecture.
By extending the tcs we allow a direct access to the thread
entry point and its parameters, only when thread monitor is
enabled.
It also allows a task to access its kernel task structure
through the first parameter of the thread.
This allows a debugger application to access the information directly
from the thread context structures list.
Change-Id: I0a435942b80eddffdf405016ac4056eb7aa1239c
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
This reverts commit 0d50329105.
This breaks sanitychecks in CI. The early_sleep kernel test case is failing
randomly.
Change-Id: I015f20699c052b4089076699fc0180945c4d3d16
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Exposes the CONFIG_THREAD_MONITOR functionality as part of the
object tracing header.
Change-Id: I2022a580df2cf33e543b980dc9c33b9adca3d3bf
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
Restructure the kernel's object tracing implementation
to provide a public API that allows debug tools to use
the debug hooks easier and allows kernel developers
to extend the kernel's object tracing scope and include
new kernel objects easier.
The API provides the trace list abstraction to keep track
of different types of kernel objects. The API contains
a simple single-linked list implementation that allows
to save space and simplifies the access to the data for
debug tools such as gdb.
Change-Id: Ic4d393d584576f67f2c5b706e61bae08869debba
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
Moves some code from pool_alloc into a helper function,
to avoid code duplication when implementing a pool based heap.
Change-Id: I29b9bc1b8ba166a2187df5ea037aad4d4a522f69
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Specifying HEAP_SIZE keyword in an app's MDEF file, results in
creating a new memory pool, which can be accessed using the
task_malloc() and task_free() APIs, which have the usual malloc/free
like semantics.
Expected format in MDEF file
HEAP_SIZE <value>
Change-Id: I0569cffeecf8a2c23c20c7b359256123ece91982
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Add support for task_sleep() and fiber_sleep() during the
system initialization. When CONFIG_NANO_TIMEOUTS defined,
before the k_server() starts, kernel uses nanokernel
system clock announce and task sleep functionality.
To give device drivers early sleep functionality, the system
clock has to start on SECONDARY initialization level, same
as most of the drivers.
Change-Id: I5b3cf3da4c8d8398a966e901ab211f2fcee18dd6
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
This patch updates some help sections to remove the "ERROR:
Unexpected indentation" messages during hmtl documentation
generation.
Change-Id: Idcdc17727b921b6145f9eb28d85975ceca273ce2
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
Like for the other context-specific APIs, also provide a
context-agnostic wrapper.
Change-Id: Icf0a62f4c06aec42f0febc298edbd8bdeec63749
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
A call to xxx_fiber_wakeup() if the timeout had expired would put the
fiber on the fiber ready queue _again_, corrupting it, or could remove
the fiber from a nanokernel object wait queue, prematurely un-pending
it.
We now verify the fiber is indeed still on the timeout queue and also
not on a wait queue, meaning the fiber is indeed sleeping.
Change-Id: Iba454d79ab50db01632b0591fb7b589221b5110b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Until now, this was not needed since the checks for being on a wait
queue were only performed if a fiber was known to be on a timeout queue
as well. However, an upcoming fix for _fiber_wakeup() needs to verify if
a fiber is on a wait queue even if it is not timing out, because said
fix needs to check if the fiber is timing out as well.
Change-Id: If1694ceb551f2029d6a145963e81d3826956fd1d
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
An upcoming fix for _fiber_wakeup() will need to know if the fiber was
dequeued from a timeout queue.
Change-Id: I09ca039098c09a997db73f4719261352f0af07c1
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Adds the following routines for waking a fiber that was previously
put to sleep using fiber_sleep().
isr_fiber_wakeup()
fiber_fiber_wakeup()
task_fiber_wakeup()
Change-Id: I7d78ee6997163d71b92f388a7b4c484f2e97862b
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The fiber_start() family of routines now return a nanokernel
thread id (nano_thread_id_t). This is a pre-requisite step for
allowing fiber_sleep() operations to be cancelled.
Change-Id: I74a3885eda3252c158f4a48e90244569633469c3
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Instead of returning a 'void *', the nanokernel fiber_delayed_start()
family of routines now return a handle of type nano_thread_id_t.
Consequently, the nanokernel fiber_delayed_start_cancel() family of
routines now accept a parameter of type nano_thread_id_t instead of
'void *'.
The complete list of affected nanokernel routines is:
fiber_delayed_start() fiber_delayed_start_cancel()
fiber_fiber_delayed_start() fiber_fiber_delayed_start_cancel()
task_fiber_delayed_start() task_fiber_delayed_start_cancel()
Change-Id: Ibd4658df3ef07e79a81b7643a8be9ea5ffe08ba0
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
This is part of an ongoing development of power management
support in zephyr. This implementation builds upon an existing
hook interface and adds more enhancements. This was tested
with reference implementations on quark_d2000 and quark_se.
Change-Id: I28092b7ec90ce1f1cc661cf99ca88708910c8eb2
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Renamed functions and labels used in power management code
according to coding convention. Only doing this to relevant
functions and not touching functions that will be removed in
future patches.
The stack used during resume would be necessary so
renamed that too.
Change-Id: I2f09a349b0f0fd6520c11b4cd73f4c8e1a13f100
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
This is a prologue to reverting:
commit 3c66686
Author: Benjamin Walsh <benjamin.walsh@windriver.com>
Date: Tue Feb 9 17:34:02 2016 -0500
sys_clock: start the microkernel ticker in the MICROKERNEL init level
to allow the devices initializing in pre-MICROKERNEL init levels to poll
the hi-res clock (sys_cycle_get_32()), which relies on the system clock
having been started.
This change allows starting the system clock in the NANOKERNEL init
level by delaying announcing the ticks until the MICROKERNEL init level.
Change-Id: I43d54bb5e2f182d4edd880da0124a0817f911943
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The file is already guarded with
obj-$(CONFIG_STACK_CANARIES) += compiler_stack_protect.o
So no need to check for CONFIG_STACK_CANARIES again in the file itself.
Change-Id: I09cf274679a1678f02478fca799a3f6507e77211
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
It is now safe to enable sys_thread_busy_wait() for ARM as an earlier
patch has fixed the build system to link against the correct intrinsics
library.
Change-Id: Ib5ed036d996461b91f372b2b3e8f597a925d3292
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Moving comments back to the 70 character limit. Also moving some of the
comments up to be included in the doxygen headers instead of inline.
Change-Id: I56a6015e5fd6da81e9a06701217e62e899b6aa62
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Zephyr includes a Task Monitor feature that allows to
track events on the microkernel server scheduler.
Task monitor is integrated as a profiler point for the
Kernel Event Logger feature.
Change-Id: I7b8be5872439a333f976eada1aa3511d93b46388
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Task monitor is being tracked as a profiler point of the kernel
event logger. Now, the capacity to register task monitor events
is dictated by KERNEL_EVENT_LOGGER_BUFFER_SIZE symbol.
Change-Id: Ia4fe04c7d46fe41524c53447ad51af2e03ea5a15
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Kernel event logger keeps track of task monitor events.
Old structures are not needed anymore.
Change-Id: I2267bdb3c2f27ea87d8675c4ecf0646ea62761ae
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Interrupts must be locked when processing announced ticks in
_nano_sys_clock_tick_announce(). This prevents higher priority
interrupts from interrupting the tick announcement and possibly
corrupting the timeout and/or timer queues.
Change-Id: I4e87fc5b3ad36161e0accb50b2691f975f5877e5
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Mostly SoC initialization and some kernel subsystems, but also some
device drivers like the interrupt controllers.
Change-Id: I8dc1844c33acd877c075b6b03558fdca6f87500b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
They have been replaced by DEVICE_INIT().
Change-Id: I06551f37593a3debb7eb221badd267bb5c7040c0
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This is the last step before obsoleting DEVICE_DEFINE() and
DEVICE_INIT_CONFIG_DEFINE().
Change-Id: Ica4257662969048083ab9839872b4b437b8b351b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Rename it to DEVICE_DEFINE() so that it fits in the 'device' namespace.
Change-Id: I3af3a39cf9154359b31d22729d0db9f710cd202b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Rename it to DEVICE_INIT_CONFIG_DEFINE(), because (a) it was not fitting
in any namespace and (b) it is not used to declare, but rather define a
object.
Change-Id: I1da5822f06b85a9fb024b5b184afd0ccc01012ec
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Fix an issue where, if a task is pending on a nano timeout, the duration
it wants to wait is not taken into account by the tickless idle code.
This could cause a system to wait forever, or to the limit of the timer
hardware (which is forever, for all intents and purposes).
This fix is to add one field in the nanokernel data structure for one
task to record the amount of ticks it will wait on a nano timeout. Only
one task has to be able to record this information, since, these waits
being looping busy waits, the task of highest priority is the only task
that can be actively waiting with a nano timeout. If a task of lower
priority was previously waiting, and a new task is now waiting, it means
that the wait of the original task has been interrupted, which will
cause said task to run the busy loop on the object again when it gets
scheduled, and the number of ticks it wants to wait has to be recomputed
and recorded again.
Change-Id: Ibcf0f288fc42d96897642cfee00ab7359716703f
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Adds C++ support to the build system.
Change-Id: Ice1e57a13598e7a48b0bf3298fc318f4ce012ee6
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds extern "C" { } blocks to header files so that they can be
safely used by C++ source files.
Change-Id: Ia4db0c36a5dac5d3de351184a297d2af0df64532
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
This is being removed for a few reasons:
- AFAICT this is the only API in Zephyr that follows an allocate/free
model.
- There are no public APIs in the interrupt subsystem for releasing
or reconfiguring an interrupt. This code was relying on arch-specific
private APIs. If we really want to keep this capability we should
make these APIs public and consistent across arches.
- The use-case for this API is not clear, as Zephyr is not intended
for hot-pluggable peripherals. Built-in hardware tends to need its
interrupt for its entire life cycle.
- The current implementation of dynamic interrupts on x86 does not
support freeing a dynamic IRQ that was reserved with
irq_connect_dynamic(), causing this code not to work. To add this
would require reimplementing _get_dynamic_stub() to use a bitfield
or set of bitfields to track unused stubs rather than the simple
counter it uses now.
Change-Id: I7a03c134fb3498b91a1816318a88b293e26b846c
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The interrupt API has been redesigned:
- irq_connect() for dynamic interrupts renamed to irq_connect_dynamic().
It will be used in situations where the new static irq_connect()
won't work, i.e. the value of arguments can't be computed at build time
- a new API for static interrupts replaces irq_connect(). it is used
exactly the same way as its dynamic counterpart. The old static irq
macros will be removed
- Separate stub assembly files are no longer needed as the stubs are now
generated inline with irq_connect()
ReST documentation updated for the changed API. Some detail about the
IDT in ROM added, and an oblique reference to the internal-only
_irq_handler_set() API removed; we don't talk about internal APIs in
the official documentation.
Change-Id: I280519993da0e0fe671eb537a876f67de33d3cd4
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Simplifies the nanokernel timer API so that the timeout parameter must be
specified when invoking nano_isr_timer_test(), nano_fiber_timer_test(),
nano_task_timer_test() and nano_timer_test().
This obsoletes the following APIs:
nano_fiber_timer_wait()
nano_task_timer_wait()
nano_timer_wait()
Note that even the though the new API requires that the timeout parameter
be specified, there are currentl only two acceptable values:
TICKS_NONE and TICKS_UNLIMITED
Theoretically, the current implementation would allow one to supply a
finite positive value for the timeout and the system would wait up to
that many ticks for the timer to expire. However, it is thought that
that unnecessarily complicates the nanokernel timer model and so it is
left as an unsupported option. Should that change, then that feature
could be enabled by updating the documentation.
Change-Id: I8835c5342ab5025d6f70fdfbed54a50add7568d7
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the nanokernel stack API so that the timeout parameter must be
specified when invoking nano_isr_stack_pop(), nano_fiber_stack_pop(),
nano_task_stack_pop() and nano_stack_pop().
This obsoletes the following APIs:
nano_fiber_stack_pop_wait()
nano_task_stack_pop_wait()
nano_stack_pop_wait()
Note that even though the new API requires that the timeout parameter
be specified, there are currently only two acceptable values:
TICKS_NONE and TICKS_UNLIMITED
This nanokernel option does not support CONFIG_NANO_TIMEOUTS.
Change-Id: Ic7f16ee30c3534115ceffa19ef8591ecc5a79080
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the nanokernel LIFO API so that the timeout parameter must be
specified when invoking nano_isr_lifo_get(), nano_fiber_lifo_get(),
nano_task_lifo_get() and nano_lifo_get().
This obsoletes the following APIs:
nano_fiber_lifo_get_wait()
nano_fiber_lifo_get_wait_timeout()
nano_task_lifo_get_wait()
nano_task_lifo_get_wait_timeout()
nano_lifo_get_wait()
nano_lifo_get_wait_timeout()
Change-Id: Ie9f93e46da42ea33c32544c02ab1d70b893cc198
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the nanokernel semaphore API so that the timeout parameter must be
specified when invoking nano_isr_sem_take(), nano_fiber_sem_take(),
nano_task_sem_take() and nano_sem_take().
This obsoletes the following APIs:
nano_fiber_sem_take_wait()
nano_fiber_sem_take_wait_timeout()
nano_task_sem_take_wait()
nano_task_sem_take_wait_timeout()
nano_sem_take_wait()
nano_sem_take_wait_timeout()
Change-Id: If7a4bce1bd8ec8d6410d04f3c16ff1922ff0910e
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the nanokernel FIFO API so that the timeout parameter must be
specified when invoking nano_isr_fifo_get(), nano_fiber_fifo_get(),
nano_task_fifo_get() and nano_fifo_get().
This obsoletes the following APIs:
nano_fiber_fifo_get_wait()
nano_fiber_fifo_get_wait_timeout()
nano_task_fifo_get_wait()
nano_task_fifo_get_wait_timeout()
nano_fifo_get_wait()
nano_fifo_get_wait_timeout()
Change-Id: Icbd2909292f1ced0bad8a70a075478536a141ef2
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The macros _NANO_TIMEOUT_TICK_GET() and _NANO_TIMEOUT_ADD() will be
used in later commits to help simplify the nanokernel APIs.
Change-Id: I668af85d775eab112953d064d9c91de607f60a59
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Fixes the routine names referenced in the INT_LATENCY_BENCHMARK
kconfig option description.
Change-Id: I74c67a8f54cfc3b0ce75fc390d7ab6bd39561d6f
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The routines _int_latency_start() and _int_latency_stop() have been
replaced by macros that evaluate to nothing when the kernel config
option INT_LATENCY_BENCHMARK is not enabled thereby giving a performance
boost to the x86 versions of irq_lock() and and irq_unlock().
Change-Id: Iabfa7bf001f5b8396e7bcf5eebd6b1aa342bac46
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
An architecture that supports tickless idle in the nanokernel can allow
selecting TICKLESS_IDLE by forcing NANOKERNEL_TICKLESS_IDLE_SUPPORTED to
be enabled.
Change-Id: I4e45b619c599913d40b7bc19902094fb361b1e3b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Re-applying this patch, which was lost when moving to kbuild:
commit 64c0f13f9380 ("kconfig: remove useless tickless idle dependency")
Author: Benjamin Walsh <benjamin.walsh@windriver.com>
Date: Mon May 11 15:13:46 2015 -0400
kconfig: remove useless tickless idle dependency
TICKLESS_IDLE_THRESH depends on TICKLESS_IDLE, which depends on
ADVANCED_POWER_MANAGEMENT, which itself already depends on
MICROKERNEL. There is thus no point in having TICKLESS_IDLE_THRESH
depend on MICROKERNEL.
Change-Id: I95edcc7b927dd122b80f376c96233decdcc9afab
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
The architectures need to add support for it in their nano_cpu_idle()
and nano_cpu_atomic_idle() implementations, as well as in their
interrupt entry and exit code.
Change-Id: I44a241c56e624dc8e32e08db29a84489314cd7a4
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Note that the A->Comm is a pointer to the microkernel functions,
and thus is highly probable that the high 8-bit is occupied.
Therefore adds a new field in the monitor struct to store the pointer.
Change-Id: I7bcb34108c89a97cc38b2ac411ae4139b62786f3
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Move SECONDARY init level from essential pseudo-fiber
to the idle task, so the device initialization routines
may use interrupts and wait for interrupts.
Change-Id: I5afa92d8b304de5b295450f0a8a761385b7c2566
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Changes the FIFO API so that the timeout parameter must be specified
when invoking task_fifo_get() thereby making the following APIs obsolete:
task_fifo_get_wait()
task_fifo_get_wait_timeout()
_task_fifo_get()
Change-Id: Iac626d9d6d4836033e06ffd5a2ca415ab2630b1a
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the FIFO API so that the timeout parameter must be specified
when invoking task_fifo_put() thereby making the following APIs obsolete:
task_fifo_put_wait()
task_fifo_put_wait_timeout()
_task_fifo_put()
Change-Id: Ifbbfb7018fd9a71551ccba648fda6d2d59d589a6
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the mutex API so that the timeout parameter must be specified
when invoking task_mutex_lock() thereby obsoleting the following APIs:
task_mutex_lock_wait()
task_mutex_lock_wait_timeout()
_task_mutex_lock()
Change-Id: I15d4bddbdc2707b3cbdab672498170da1c47b8db
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the mem_pool API so that the timeout parameter must be specified
when invoking task_mem_pool_alloc() thereby obsoleting the following APIs:
task_mem_pool_alloc_wait()
task_mem_pool_alloc_wait_alloc()
_task_mem_pool_alloc()
Change-Id: Ifa88f13bca98ca3c7d0e1a3b64b40a00068619e0
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the mem_map API so that the timeout parameter must be specified
when invoking task_mem_map_alloc() thereby obsoleting the following APIs:
task_mem_map_alloc_wait()
task_mem_map_alloc_wait_alloc()
_task_mem_map_alloc()
Change-Id: I8905d07fa4b8c3729ca144e8f09e7ad0c7bf0f43
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the semaphore API so that the timeout parameter must be specified
when invoking task_sem_group_take() thereby obsoleting the following APIs:
task_sem_group_take_wait()
task_sem_group_take_wait_timeout()
_task_sem_group_take()
Change-Id: I64e3f4c9f1e74a86b49d4a0e55b82ecee7733220
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the semaphore API so that the timeout parameter must be specified
when invoking task_sem_take() thereby obsoleting the following APIs:
task_sem_take_wait()
task_sem_take_wait_timeout()
_task_sem_take()
Change-Id: I746d5c966a3b81ffe014333af51aa10ea8a63263
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the pipe API so that the timeout parameter must be specified
when invoking task_pipe_get() thereby obsoleting the following APIs:
task_pipe_get_wait()
task_pipe_get_wait_timeout()
_task_pipe_get()
Change-Id: If249e57d086fef15fdc1616965f53b310ac9cf9d
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the pipe API so that the timeout parameter must be specified
when invoking task_pipe_put() thereby obsoletingg the following APIs:
task_pipe_put_wait()
task_pipe_put_wait_timeout()
_task_pipe_put()
Change-Id: Ie5693716828e9d8681434c0d130792279ab97acc
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Updates comparisons in the pipe code to put the constant on the
right side of the test. This improves compliance with checkpatch.
Change-Id: I8e55afd94e0532dd7a67bd83e737846279654dff
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the mailbox API so that the timeout parameter must be specified
when invoking task_mbox_data_block_get() thereby obsoleting the
following APIs:
task_mbox_data_block_get_wait()
task_mbox_data_block_get_wait_timeout()
_task_mbox_data_block_get()
Change-Id: I284be505e6de792ba5483611d1299063162550e1
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the event AIP so that the timeout parameter must be specified
when invoking task_event_recv() thereby making the following APIs obsolete:
task_event_recv()
task_event_recv_wait()
task_event_recv_wait_timeout()
_task_event_recv()
Change-Id: I165a8efbdedb431fee0c20e9ad1f1942c04124c0
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the task IRQ API so that not only does task_irq_test() become
task_irq_wait(), but that the timeout parameter must also be specified.
Use of task_irq_wait() obsoletes the following APIs:
task_irq_test()
task_irq_test_wait()
task_irq_test_wait_timeout()
_task_irq_test()
Change-Id: Ie4d15f29941429249e9fbb258d29ec2b3ae73a93
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the mailbox API so that the timeout parameter must be specified
when invoking task_mbox_get() thereby obsoleting the following APIs:
task_mbox_get_wait()
task_mbox_get_wait_timeout()
_task_mbox_get()
Change-Id: Ie028223ec342666e61d3d69750aec37dbe2b493e
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the mailbox API so that the timeout parameter must be specified
when invoking task_mbox_put() thereby obsoleting the following APIs:
task_mbox_put_wait()
task_mbox_put_wait_timeout()
_task_mbox_put()
Change-Id: I174857bdf32fe7e59b79838185666cd557312814
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Updates comparisons in the mailbox code to put the constant on the
right side of the test. This improves compliance with checkpatch.
Change-Id: If84cfbe4bbca312fabbb70d45f05675c9c15d011
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Add null definitions for the interrupt latency measurement API so we
can remove compile fences in C code.
Change-Id: If86eedf79afcb49002108814dd4fb864956eb667
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Saves an errno per-thread, retrieved via _get_errno(), instead of
changing the value of a global variable during context switches to avoid
a hit to the context switch performance.
Per-arch asm implementations are provided for maximum performance.
Enabled by default, but can be disabled via the CONFIG_ERRNO option.
Change-Id: I81d57a2e318c94c68eee913ae0d4ca3a3609c7a4
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Removed old style file description and documnetation and apply
doxygen synatx.
Change-Id: I3ac9f06d4f574bf3c79c6f6044cec3a7e2f6e4c8
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The system crashed if an interrupt occurs before the
kernel event logger is initialized (Error seen on Galileo).
This patch adds a condition to check if the logger is ready
to operate.
Change-Id: I27d7cc31f386780725b0c47a9c92e9c064fc128a
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
This patch remove the dependency of the ADVANCE_POWER_MANAGEMENT
for profiling sleep events that was supported only for microkernel.
Allowing us to also use this feature in nanokernel-only systems.
Change-Id: I1761eb6c4d72f477b419dfca5dc152b0fb69ee27
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Replaces calls to nano_cycle_get_32() and task_cycle_get_32()
with sys_cycle_get_32() as that is the preferred API to use.
Change-Id: I0ad1c50083c4cfdd9a26c2f20ba24e065410d90d
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Renames _sys_clock_cycle_get() (provided by the timer driver)
to sys_cycle_get_32(). It is the preferred method to read the
hardware clock.
Change-Id: Ifea5213d8c04a8bf7b9114b048c5db0ccee61549
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Put initialization priorities as device driver Kconfig
parameter.
Initialization priority value for each platform is defined
in the platform Kconfig file.
Drivers and platform code use SYS_DEFINE_DEVICE to add
and initialization function.
Change-Id: I2f4f3c7370dac02408a1b50a0a1bade8b427a282
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Replaces microkernel global variable _k_sys_clock_tick_count with the
global variable _sys_clock_tick_count. This allows both the microkernel
and the nanokernel to use the same variable to track system clock ticks
instead of using two different ones.
Change-Id: Ia4eebf022f59d130ad1882e0e550016527543a45
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Renames nanokernel global variable _nano_ticks to _sys_clock_tick_count.
Change-Id: I857407f1f7e8d9fd2eedc1c1696851173e58d2b4
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Fixes the type of global variable _sys_idle_elapsed_ticks such that
both its nanokernel and microkernel definitions are of the same
type--int32_t.
One of the repercussions of this is that code related to the routine
_nano_sys_clock_tick_announce() does not need the application of
typecasting.
Change-Id: I3d7374cd1a32aea7e4651726febde74ebe4ac8ac
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Standardizes appearance, corrects errors, improves readability,
and fils in gaps. Also relocates documentation for internal APIs.
Removes mention of non-existent task_sem_group_take() API from
the Kernel Primer document. The microkernel's semaphore group logic
currently allows a task to take a semaphore from a semaphore group
in a blocking manner.
Change-Id: Ib41a43775a97483a5adc552b70575ae4269aba35
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
It's not really scheduling a fiber, it's making it ready. So, rename it
to _nano_fiber_ready().
Change-Id: I34bf67a8f0ea641bb2fd1c47fe8d689fef754cb8
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Some timer devices, such as the HPET, read their frequencies at runtime.
All global constant values must be set at runtime in that case.
Change-Id: I408babce6deb857748a87691132d7e27e88f0bb8
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Some global variables were duplicated, being defined in either
k_ticker.o or nano_sys_clock.o depending on the type of kernel.
nano_sys_clock.o is always generated, so move the definitions found in
that file from inside the NANOKERNEL guard and remove them from
k_ticker.c to avoid useless duplication.
Change-Id: Iea67f89cad44b29671df7fa4d573105c0bbe3102
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This routine allows the background task to sleep for a specified
number of ticks.
Change-Id: I2533005e3d9a564c2ca0de8333e224743cefb658
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds the following generic stack routines:
nano_stack_push()
nano_stack_stack_pop()
nano_stack_pop_wait()
Those routines are convenience wrappers for invoking the task, fiber and
ISR (if applicable) specific implementations.
Change-Id: I6e7bb2ca69bb2e3d5ed955654390746e76e4ab92
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds the following generic semaphore routines:
nano_sem_take()
nano_sem_take_wait()
Those routines are convenience wrappers for invoking the task, fiber and
ISR (if applicable) specific implementations.
Change-Id: I09d715d07263eb0ee526231120ba65d1e3feebce
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds the following generic lifo routines:
nano_lifo_put()
nano_lifo_get()
nano_lifo_get_wait()
nano_lifo_get_wait_timeout()
Those routines are convenience wrappers for invoking the task, fiber and
ISR (if applicable) specific implementations.
Change-Id: I5252e4643fe4772f1309b26c1b3e4319f5035956
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds the following generic fifo routine:
nano_fifo_get_wait_timeout()
That routine is a convenience wrapper for invoking the task or fiber
specific implementation.
Change-Id: I9bd709ea416db834e2a0c5de81257c363e7db066
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Do not depend on environment variables and use a kconfig variable
for defining the architecture.
In addition, remove the X86_32 variable, it just duplicates X86 for
not good reason, at least until start supporting MCUs with 64bit.
Change-Id: Ia001db81ed007e6a43f34506fed9be1345b88a4b
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Force setting the value in the platform kconfig instead of defaulting
to 0.
Change-Id: Iceeb6346afc4217dd09d31c28898e3693b08f781
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Event ID are not validated anymore against the maximum event number in
the system, since they are pointers now instead of low integers.
Validation can be useful, but only do it in a debug kernel, with no
penalty to a deployment system.
Change-Id: Ifd8dc8841892f6d19bbcb0c641a655fd0cb6ddb7
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Standardizes appearance, corrects errors, improves readability,
and fills in gaps. Also streamlines descriptions for internal APIs
that don't require the same level of detail as public APIs.
Change-Id: Ic0f8149d14a8dab5e6df28b594c9b2e17f73e7b6
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Flags allow passing IRQ triggering option for x86 architecture.
Each platform defines flags for a particular device and then
device driver uses them when registers the interrupt handler.
The change in API means that device drivers and sample
applications need to use the new API.
IRQ triggering configuration is now handled by device drivers
by using flags passed to interrupt registering API:
IRQ_CONNECT_STATIC() or irq_connect()
Change-Id: Ibc4312ea2b4032a2efc5b913c6389f780a2a11d1
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
This commit fixes the nanokernel sample of the kernel event logger
that shows the event messages for context switch and interrupt events.
Change-Id: I4e972adb06b81f2f548bbabe8cd6577af633001c
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Remove prototype support for C++ constructors, since it is not well
designed. Device drivers (or other application code) that requires an
automatic initialization capability should use the device initialization
macros instead.
Note: Support for C++ constructors may be re-introduced at a later date.
However, a number of issues need to be settled, such as when the
constructors are invoked and what context they run in. (Running them
during nanokernel initialization, as was previously done, is probably
not the right approach.)
Change-Id: If6d27ac16b485cb39d5ec34084e9d0f1991074f4
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
It can be used by some subsystems even in a microkernel.
Change-Id: I07241aab94ecf67c94dce2d05f2cd774b2a6b044
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The microkernel server now relies on the fact that the command packets,
events, and semaphores passed to it via its command stack are 32 bit
aligned. This change explicitly ensures this alignment, rather than
leaving it to the compiler's discretion.
Change-Id: Ied7a0a0b4cc504c924520b72ef2b207b49470448
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Revises microkernel semaphore sub-system to allow ISRs and fibers
to give a semaphore without having to define a command packet set.
The microkernel server now supports a 3rd command type on its
command stack, allowing a semaphore to be given in a similar manner
to the one used for the existing "give event" command type.
Change-Id: Ibd7fb1a77949792f72acd20a9ee304d6eabd62f7
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This option is not building and currently not supported, removing
it because there does not seem to be a use case for it.
Change-Id: Idb8ffedf83f43cffc68a01573c6f2d1a90fc40fb
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In order to have a name according to the functionality of the feature.
This commit rename any text, function and variable related with the
Profiler name to Event logger.
Change-Id: I4f612cbc7c37965c35a64f06cc3ce5e3249d90e5
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Revises microkernel server command stack processing to allow the
server to support more than 2 types of commands. The lowest 2 bits
of the command now indicate the command's type:
0 - process specified command packet
1 - give specified event (from ISR or fiber)
2 - give specified semaphore (from ISR or fiber)
3 - reserved for future use
Note: Support for type 2 will be provided in a future commit.
Change-Id: I9f83f92a301fb5df3dd479b5d43b187371e11ad8
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The \NOMANUAL tag is a remnant from days of yore and is no longer
needed or useful. Cleaning up the code references to this.
Change-Id: I1b8cc9c9560d1dbb711f05fa63fd23386789875c
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
This patch enables defining microkernel events within source code.
This is similar to other private kernel object patches.
The test has been modified a little bit due to the fact that
the event ID is now a memory address, instead of numeric ID.
Change-Id: Ie3c8d4f4e459d9c631e50bb242cf7a05ca8ea82c
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The Kconfig option CUSTOM_SECURITY is not used anywhere.
Change-Id: Ifac00cd1234ff9498c2f977054a902e0153b6b28
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Change-Id: I7dd5645db1de00ab4bf2ca3c7a8bae906e8d9e54
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change-Id: I7e920e6de8f4b7a726c03c05edea3cbac69eb374
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change-Id: I2276676142deea21cf8079449ce153f2fb887a8e
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change-Id: I819d13f0d7a23e3a61dcda6a3ced18810b192158
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change-Id: Ie655181d5ed11a71cadfa218f396f0b64992ca34
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change-Id: Ib3f69be9f9273e57952a3ebceebc82d84c607c64
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change-Id: I6da43e41f9c6efee577b70513ec368ae3cce0144
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Moving many of the functions from the old format of inline comments to
the newer doxygen format.
Change-Id: Ib0fe0d8627d7cd90219385a3ab627da8f9637d98
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Add a list for each kind of microkernel object. Add the register of
the public objects to the tracing lists in the dynamic initialization
function of sysgen.
Change-Id: I8c413812e4db0f443c9dd3a5501e0096270dc70e
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Add a list for each kind of nanokernel object. And link the object
to the list on the initialization function.
Change-Id: I7a51902a8d1b306ec50d9486e55af286127fcb1a
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Change-Id: I8f51f861e2250c87c296b697ef5b6610ce644b34
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Improves the efficiency of the search by doing a single pass through
all device objects, rather than searching one level at a time.
Also enhances the comments for this routine.
Change-Id: I6786f24381f03d74d8c559ccbd7aa6a37683a8b7
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Introduces the SYS_DEFINE_DEVICE() macro, which supports 5 distinct
levels of device initialization and 100 priorities within each level.
Note: The existing init macros (e.g. nano_early_init()) have been
adapted to utilize the enhanced initialization model, but will
eventually be retired.
Change-Id: If677029d8b711a3fae9b2f32b5470cd97d19aeda
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Reworks the internal design of a command packet set so that
the command packet array is split out into a separate variable
lying in uninitialized memory. This shrinks the command packet's
data section footprint to almost nothing.
Note: A side effect of this change is that it is no longer possible
to define a command packet set as a "static" variable since the
CMD_PKT_SET_INSTANCE() macro now generates two variables.
Change-Id: I9c7ebe637edf879758589ff4a26ace1303790bf7
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Change all the Intel and Wind River code license from BSD-3 to Apache 2.
Change-Id: Id8be2c1c161a06ea8a0b9f38e17660e11dbb384b
Signed-off-by: Javier B Perez Hernandez <javier.b.perez.hernandez@linux.intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Provides a way for a fiber or task to busy wait for a specified
period of time. This is useful in situations where a delay needs
to be performed without switching execution to another context,
such as:
1) It would take longer to switch to another context and then switch
back again than to simply busy wait.
2) A delay is required by the kernel's main task (i.e. the nanokernel's
background task or the microkernel's idle task). This task is not
allowed to voluntarily relinquish the CPU because this would leave
the kernel with nothing to execute in its place.
Change-Id: Icbe28613014f659e9528893ae58f7b8008c18a61
Original-work-by: Jeff Blais <jeff.blais@windriver.com>
Further-adapted-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
do not use microkernel or nanokernel as the output binaries,
instead, use zephyr globally.
Also change the documentation to reflect this.
Change-Id: I8405761d1a0392c90cdfeec5c67d72eb4e5a76ff
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Revises microkernel initialization code by incorporating the existing
_k_kernel_init() and main() routines into _main(). This optimizes kernel
initialization a bit, and allows application code to use main()
if desired -- for example, as the entry point to an application task.
The change also eliminates the need for sysgen to generate a routine
whose content is always the same.
This change preserves the existing order of operations done during
kernel initialization, and leaves further improvements for later.
Change-Id: Ie03d8a6f38f8a311f398667ed977fd8478719d70
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Remove the hard dependencies on EXPERIMENTAL symbol. Mark all the
symbols the relied on EXPERIMENTAL as EXPERIMENTAL in their prompt
Change-Id: I2779b0ed0776b3d510a8e2e44b35b83d7ad2377c
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This option is no longer used in any configuration
Change-Id: I2f9be9f286cff3f38722ae1fe807661a1f99cdcd
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
ENHANCED_SECURITY is being used to enable security options the
projects that require security options explicitly enable these options
the dependency is not required.
Change-Id: Iec96e32bd7a5faa78672d355aad368f48b0ee087
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Change the default for ENHANCED_SECURITY to no in preparation for the
option to be removed.
Change-Id: Ic46730b187f361226064a3e205f48433b0bebdd7
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
There are devices that need are part of the architecture core the need
to be initialized prior to devices that are integrated around a core
to make up a complete SOC. Namely the interrupt controller in the SOC
must be configured in order to allow the integrated IP blocks drivers
to initialize correctly.
Change-Id: I0a91e08f98516a7b7dd402ffc6494a071f1326b2
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Features displayed with "[EXPERIMENTAL]" should depend on
CONFIG_EXPERIMENTAL.
Change-Id: I0a86dff442014caa2fa4629138dbe29e69d5b853
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Do not enable the feature by default when EXPERIMENTAL features
are enabled.
Change-Id: I0538f9f94bb47a4bc870c8974e80faf273070f91
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The files will have the needed fragments to move a .config
file to either a nano or micro kernel .config. This will let us
get rid of the micro_*_defconfig/nano_*_defconfig in the future
and once the sanitychecks are adapted leaving us with a single
fragment file per platform and thus making it easier to maintain.
Change-Id: If23b32cc259de498816ddc8be15cdd6e0014106a
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Due to similar padding issue as pipe, the list of task object
may not be used directly. As mentioned before, some compiler/linker
may pad the large struct. For example, compiling under gcc and
march=i686 pads the struct to 32-byte alignment (march=atom to
64-byte alignment). This causes issue with sizeof() and pointer
arithmetic because they have no idea about the padding.
When the stars align in a certain way, these task structs may be
corrupted. So add a task pointer list and use it for task
manipulation. The task list remains as it is beneficial to group
them together to take advantage of cache locality.
Change-Id: I0e86bfe05742040f4540d7854c1ac14e76162776
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
It was badly named: this routine initializes what cannot be done
statically, i.e. what has to be done dynamically.
We also do not have concepts of "node" anymore since the kernel is
single-node only.
Change-Id: Idde3183ca01ca3f70c5ae0e948734a965582ded8
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
When THREAD_MONITOR is enabled, not removing the fiber from the thread
list (a) would cause the list to be erroneous, and (b) would cause
corruption of the list if the fiber stack was reused to start a new
fiber (or any other usage really).
Change-Id: I622ffdbd146ec4b0e78b051d1b444fdf35efcd1e
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Update the documentation of _thread_exit() to reflect the fact that a
task can call it if it does so with interrupts locked. A task or another
fiber cannot preempt a fiber, so a fiber can still call _thread_exit()
without locking interrupts. If a task locks interupts first then calls
it, no fiber or other task can preempt it either.
Change-Id: If8624842fc202a0917b0499458e14f95d7f461df
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The profiler now uses the generic ring buffer. The dropped event
count is stored in the ring buffer's value field. The data size only
refers to the extra data attached to the message and NOT any internal
representation of metadata inside the ring buffer, the event_logger
APIs now pass this information along in dedicated parameters.
Change-Id: I1f168e6a05e8d937bf86b2a4cccecbb04b0118c6
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This patch is based on some code contributed by Dirk Brandewie.
This is a generic data structure for queuing data in a FIFO ring
buffer. Any given data enqueued is annotated with an app-specific
type identifier, and small integral value. Use of a data pointer
is optional if the necessary information can be conveyed in the
annotations. We want all the metadata to fit in a single DWORD.
The ring buffer always contains at least one free dword in the
buffer to correctly distinguish between full and empty queues.
Concurrency control is almost nonexistent; depending on usage,
apps may want to introduce the usage of semaphores and/or mutexes
to preserve the integrity of the ring buffer or provide notifications
when data is available.
Change-Id: I860262d2afc96db4476d4c695a92f7da355ab732
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Doxegenize and cleanup headers for nanokernel
- fibers
- context
- timers
- stacks
Also minor cleanup of x86/arch.h
Change-Id: Ib65568d4ec034b69e8a6214ba4b52a7f719300bb
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Rename field 'MovedReq' of the struct:
- 'k_args_args' in the file kernel/microkernel/include/micro_private_types.h
Change-Id: I3ed7ad0b4fed3791b79ad279ebabf7440b8edf7c
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'Extra' of the struct:
- 'moved_req' in the file kernel/microkernel/include/micro_private_types.h
Change-Id: I86a0873122576486602bd18967748748f7abce12
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'Setup' of the struct:
- 'moved_req' in the file kernel/microkernel/include/micro_private_types.h
Change-Id: I2a3013131595b66508c7a6fb6e4b364ceb06a459
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'iTotalSize' of the struct:
- 'moved_req' in the file kernel/microkernel/include/micro_private_types.h
Change-Id: I2422d13699443d9744f882d566da1089943cf3db
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'Action' of the struct:
- 'moved_req' in the file kernel/microkernel/include/micro_private_types.h
Change-Id: I3bf9c0c8142bab4f87d0a6e2b6ffe36fa20cb026
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'Sema' of the struct:
- 'moved_req_args_setup' in the file kernel/microkernel/include/micro_private_types.h
Change-Id: I0cb8cab6f8f4dab2a93c4bcb0bee6c40dbbf72bc
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'ContRcv' of the struct:
- 'moved_req_args_setup' in the file kernel/microkernel/include/micro_private_types.h
Change-Id: Ic8984aa2ed7e62c2ed7a25e825e32b2c55bb7e5d
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'ContSnd' of the struct:
- 'moved_req_args_setup' in the file kernel/microkernel/include/micro_private_types.h
Change-Id: I2476ad8641819431d13d99f1f55cb80efefa064d
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'iSize' of the struct:
- '_pipe_xfer_ack_arg' in the file kernel/microkernel/include/micro_private_types.h
Change-Id: I8463da22f659df7db1419195224f4fd818af1a03
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'ID' of the struct:
- '_pipe_xfer_ack_arg' in the file kernel/microkernel/include/micro_private_types.h
Change-Id: I090d0954547b80a58307a95433b59a6f5ed9ffe6
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'pReader' of the struct:
- '_pipe_xfer_ack_arg' in the file kernel/microkernel/include/micro_private_types.h
Change-Id: Ic6f6c042bdf392c8ccbd407f57cc520fcf6f5f0e
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'pWriter' of the struct:
- '_pipe_xfer_ack_arg' in the file kernel/microkernel/include/micro_private_types.h
Change-Id: Idc2530faa4c288e9679d65f66809ceff7f7d6d59
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'XferType' of the struct:
- '_pipe_xfer_ack_arg' in the file kernel/microkernel/include/micro_private_types.h
Change-Id: Id7097fa65f54e12840b5dd78eaa8991aea8e225c
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'pPipe' of the struct:
- '_pipe_xfer_ack_arg' in the file kernel/microkernel/include/micro_private_types.h
Change-Id: I78c7343e79f25363ba0678f0d1913e5210ac4c77
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'iNbrPendXfers' of the struct:
- '_pipe_xfer_req_arg' in the file kernel/microkernel/include/micro_private_types.h
Change-Id: Ie9b4743165ad27ac07e93d7bd8328aba44cf5e89
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'iSizeXferred' of the structs:
- '_pipe_xfer_req_arg' in the file kernel/microkernel/include/micro_private_types.h
- '_pipe_ack_arg' in the file kernel/microkernel/include/micro_private_types.h
Change-Id: I29ab4b7b277453f757f5964628f331e8e1bbe674
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'Dummy' of the structs:
- '_pipe_req_arg' in the file kernel/microkernel/include/micro_private_types.h
- '_pipe_ack_arg' in the file kernel/microkernel/include/micro_private_types.h
Change-Id: I79f7ccf1d0f790109b8337478bb203fd75052e5f
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'ReqType' of the structs:
- '_pipe_req_arg' in the file kernel/microkernel/include/micro_private_types.h
- '_pipe_ack_arg' in the file kernel/microkernel/include/micro_private_types.h
Change-Id: I3dbcb122c72509d4024f14d39eac1c28531c2ebb
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'Async' of the structs:
- '_pipe_req_arg' in the file kernel/microkernel/include/micro_private_types.h
- '_pipe_ack_arg' in the file kernel/microkernel/include/micro_private_types.h
Change-Id: I44d2f72b36809b2acc1225e351bdd16bbd0322bc
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'Sync' of the struct:
- '_pipe_req_arg' in the file kernel/microkernel/include/micro_private_types.h
Change-Id: Ifbc99dafd21be5f63043191a510e39a02e1b5c32
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'ReqInfo' of the structs:
- '_pipe_req_arg' in the file kernel/microkernel/include/micro_private_types.h
- '_pipe_xfer_req_arg' in the file kernel/microkernel/include/micro_private_types.h
- '_pipe_ack_arg' in the file kernel/microkernel/include/micro_private_types.h
Change-Id: I48c852656acc8d9306a2a0739f805bbff0d5258c
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'iSizeTotal' of the structs:
- 'sync_req' in the file kernel/microkernel/include/micro_private_types.h
- 'async_req' in the file kernel/microkernel/include/micro_private_types.h
Change-Id: Ia1187bb5707a7c858903425d420fcec23380d308
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'pData' of the structs:
- 'sync_req' in the file kernel/microkernel/include/micro_private_types.h
- '_pipe_xfer_req_arg' in the file kernel/microkernel/include/micro_private_types.h
Change-Id: I2759569fc716e5fa6adbc60143203e75ab201e03
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'Params' of the struct:
- 'req_info' in the file kernel/microkernel/include/micro_private_types.h
Change-Id: I11c36baa6f0d37f106d5ecdd236ecf216e0ac32e
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'Tail' of the struct:
- 'k_tqhd' in the file kernel/microkernel/include/micro_private_types.h
- 'List' in the file include/misc/lists.h
Change-Id: If857235ab6ec83fb058e0e2857a2828b8bfd308a
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'Head' of the struct:
- 'k_tqhd' in the file kernel/microkernel/include/micro_private_types.h
- 'k_args' in the file kernel/microkernel/include/micro_private_types.h
- 'List' in the file include/misc/lists.h
Change-Id: Id7c2bdfc8d928ca835894acd9125c0ec96502ff0
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'taskId' of the struct:
- 'irq_obj_reg_arg' in the file kernel/microkernel/k_irq.c
- 'task_irq_info' in the file kernel/microkernel/k_irq.c
Change-Id: I9e2d1fb84e4c3a0a5c1b9b8fc1fa9073091faf66
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'cmdPkt' of the struct:
- 'cmd_pkt_set' in the file Include/microkernel/command_packet.h
Change-Id: I60b58f58d44c300387722f0a9f46fc0c83f4cf69
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'nPkts' of the struct:
- 'cmd_pkt_set' in the file Include/microkernel/command_packet.h
Change-Id: I49d61060fc312d32c7840741c9295de5787d8823
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'Free' of the struct:
- '_k_mem_map_struct' in the file include/microkernel/base_api.h
Change-Id: I80362df263d22c786cb0c6c856069394a391e290
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'iBufferSize' of the struct:
- '_k_pipe_struct' in the file include/microkernel/base_api.h
Change-Id: I0e0078b2b521cdfb40e42b915a0b79d621edcccc
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'ReadMarkers' of the struct:
- '_k_pipe_desc' in the file include/microkernel/base_api.h
Change-Id: I05daa841f6b256079e6102c2da86488c7962a065
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'WriteMarkers' of the struct:
- '_k_pipe_desc' in the file include/microkernel/base_api.h
Change-Id: I586e3fbb871b254c125908f1f042ca83d7c2a3bf
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'BuffState' of the struct:
- '_k_pipe_desc' in the file include/microkernel/base_api.h
Change-Id: I8a0c4e6d7ae3a06b7e6b27777fd7e8c4fb1513e0
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'bReadWA' of the struct:
- '_k_pipe_desc' in the file include/microkernel/base_api.h
Change-Id: I92f3b560c7cc0104afeb44b65f80fcda8d89206d
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'bWriteWA' of the struct:
- '_k_pipe_desc' in the file include/microkernel/base_api.h
Change-Id: I9ae1bbd0561a3cb95251a021b90c7230cfad1fd7
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'iNbrPendingWrites' of the struct:
- '_k_pipe_desc' in the file include/microkernel/base_api.h
Change-Id: Id2edba8217e652d2ae741819d33ced2986d4d1a8
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'iAvailDataAWA' of the struct:
- '_k_pipe_desc' in the file include/microkernel/base_api.h
Change-Id: I93aff3b834b4959f48eea36ea5e6764e67175400
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'iAvailDataCont' of the struct:
- '_k_pipe_desc' in the file include/microkernel/base_api.h
Change-Id: Id2a45f9f838fdc557bfbecbe0a492f95a34517a7
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'iNbrPendingReads' of the struct:
- '_k_pipe_desc' in the file include/microkernel/base_api.h
Change-Id: I01b28e1286e7d6cb89efe53826807c6793b3976b
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'iFreeSpaceAWA' of the struct:
- '_k_pipe_desc' in the file include/microkernel/base_api.h
Change-Id: I8a55d3f0012cbeca4caa4d92024525ede865201f
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'iFreeSpaceCont' of the struct:
- '_k_pipe_desc' in the file include/microkernel/base_api.h
Change-Id: Icc9da1162f594349799e3503eafad29d8a2e52a2
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'pReadGuard' of the struct:
- '_k_pipe_desc' in the file include/microkernel/base_api.h
Change-Id: I8b55d53b1ca85e828a4907d15b556f8875aa40bd
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'pWriteGuard' of the struct:
- '_k_pipe_desc' in the file include/microkernel/base_api.h
Change-Id: I71e615342a800a62612f47b365260fe3bc3d27fd
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'pRead' of the struct:
- '_k_pipe_desc' in the file include/microkernel/base_api.h
Also rename variable instances related to this struct field.
Change-Id: I3fdc8d0c3774b29227d65e33dbd74aabef8df172
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'pWrite' of the struct:
- '_k_pipe_desc' in the file include/microkernel/base_api.h
Also rename variable instances related to this struct field.
Change-Id: I6b344f5b58e8ce83505016a240e99142d0720d6e
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'pEndOrig' of the struct:
- '_k_pipe_desc' in the file include/microkernel/base_api.h
Change-Id: I7a05f3e43ae7942455eb05093f7a0a66585163b6
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'pEnd' of the struct:
- '_k_pipe_desc' in the file include/microkernel/base_api.h
Change-Id: I858e22e7ecf77de123b93560e3b9ec99c7bb7365
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'pBegin' of the struct:
- '_k_pipe_desc' in the file include/microkernel/base_api.h
Change-Id: I6567e66cc891d052b3c7faa26b23b41dba8430a5
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'iBuffSize' of the struct:
- '_k_pipe_desc' in the file include/microkernel/base_api.h
Change-Id: Ife173a65051fecaaa652935b888b9b7921bd75f8
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'aMarkers' of the struct:
- '_k_pipe_marker_list' in the file include/microkernel/base_api.h
Change-Id: I47477bed8cb417c10e34ea412e3823db461df694
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'iAWAMarker' of the struct:
- '_k_pipe_marker_list' in the file include/microkernel/base_api.h
Change-Id: I90936fb6744812462ddb56959a106bae80285a21
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'iLastMarker' of the struct:
- '_k_pipe_marker_list' in the file include/microkernel/base_api.h
Change-Id: Id1db9432b6ddeaa46877f395e46bd81d17c05d19
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'iFirstMarker' of the struct:
- '_k_pipe_marker_list' in the file include/microkernel/base_api.h
Change-Id: Ia25fcbf11ad4d842c19e495e345daff53f42a7a7
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'iNbrMarkers' of the struct:
- '_k_pipe_marker_list' in the file include/microkernel/base_api.h
Change-Id: I5634e2ac1507974f29183bc00011bc25f8d2ab0c
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'Next' of the structs:
- '_k_pipe_marker' in the file include/microkernel/base_api.h
- 'Elem' in the file include/misc/lists.h
Change-Id: Id0155d61f1fc607c012d6ddc0d27cfcb6c966c47
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'Prev' of the structs:
- '_k_pipe_marker' in the file include/microkernel/base_api.h
- 'Elem' in the file include/misc/lists.h
Change-Id: I64da601298199cf9b1da6ae10d697e5bdfabdc32
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'bXferBusy' of the struct:
- '_k_pipe_marker' in the file include/microkernel/base_api.h
Also rename variable instances related to this struct field.
Change-Id: Ib945778ac62094d2d513250e307bf159d640e05c
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'Hmark' of the structs:
- '_k_fifo_struct' in the file include/microkernel/base_api.h
- '_k_mem_map_struct' in the file include/microkernel/base_api.h
Change-Id: I13be24d3c3654afd5fa1723a32024d0e139a1e80
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'Nused' of the structs:
- '_k_fifo_struct' in the file include/microkernel/base_api.h
- '_k_mem_map_struct' in the file include/microkernel/base_api.h
Change-Id: I698b64366fcb5ead77edfd067ddb96d16f1f179b
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'Deqp' of the struct:
- '_k_fifo_struct' in the file include/microkernel/base_api.h
Change-Id: I844b8f3f6d0f1f337856d3e1805f4d6cb1d29042
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'Enqp' of the struct:
- '_k_fifo_struct' in the file include/microkernel/base_api.h
Change-Id: I182a8be82088b808f8ccedcf76deec249cd4d2c0
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'Endp' of the struct:
- '_k_fifo_struct' in the file include/microkernel/base_api.h
Change-Id: I83c351cb8a0e33c8a0e49adb63307c2cd71f5395
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'Base' of the structs:
- '_k_fifo_struct' in the file include/microkernel/base_api.h
- '_k_mem_map_struct' in the file include/microkernel/base_api.h
Change-Id: Id21c01e26c8cad7b6b5ba350b6c9f5d5b78acaae
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'Esize' of the structs:
- '_k_fifo_struct' in the file include/microkernel/base_api.h
- '_k_mem_map_struct' in the file include/microkernel/base_api.h
Change-Id: If9a6636cb9dc637e62e8dd5335923ad5067cde5a
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'Confl' of the struct:
- '_k_mbox_struct' in the file include/microkernel/base_api.h
Change-Id: Ibfcfc933492af947950baf2b89ac25ea6671b749
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'Count' of the structs:
- '_k_mbox_struct' in the file include/microkernel/base_api.h
- '_k_mutex_struct' in the file include/microkernel/base_api.h
- '_k_sem_struct' in the file include/microkernel/base_api.h
- '_k_fifo_struct' in the file include/microkernel/base_api.h
- '_k_pipe_struct' in the file include/microkernel/base_api.h
- '_k_mem_map_struct' in the file include/microkernel/base_api.h
- 'pool_block' in the file kernel/microkernel/include/micro_private_types.h
- 'evstr' in the file kernel/microkernel/include/micro_private_types.h
Change-Id: I85c0c36f89f8189dedb242189ceb1decd8bffcfb
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'Waiters' of the structs:
- '_k_mutex_struct' in the file include/microkernel/base_api.h
- '_k_sem_struct' in the file include/microkernel/base_api.h
- '_k_fifo_struct' in the file include/microkernel/base_api.h
- '_k_mem_map_struct' in the file include/microkernel/base_api.h
Change-Id: I32db6d6213d8a3677c361f7542fdfd5444030c8a
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'Level' of the struct:
- '_k_mutex_struct' in the file include/microkernel/base_api.h
- '_k_sem_struct' in the file include/microkernel/base_api.h
Change-Id: Iec966b3973db05d37a32b24a2bc546a36bc27b3c
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'OwnerOriginalPrio' of the struct:
- '_k_mutex_struct' in the file include/microkernel/base_api.h
Change-Id: I7c9f8c9626567dba19a7e1ef593744d50c7f62c4
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'OwnerCurrentPrio' of the struct:
- '_k_mutex_struct' in the file include/microkernel/base_api.h
Change-Id: I31066ea24872a0de8ae7a01ed13b0b85c61637ac
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'Owner' of the struct:
- '_k_mutex_struct' in the file include/microkernel/base_api.h
Change-Id: I05ac935b7ee8d87fd6cbbafc2cab2386305b455c
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'Readers' of the struct:
- '_k_mbox_struct' in the file include/microkernel/base_api.h
- '_k_pipe_struct' in the file kernel/microkernel/include/micro_private_types.h
Change-Id: Id8b225d05658127eb4254b47dbf7eb04a9a2e2a2
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'Writers' of the struct:
- '_k_mbox_struct' in the file include/microkernel/base_api.h
- '_k_pipe_struct' in the file kernel/microkernel/include/micro_private_types.h
Change-Id: I3921be133d137e53b9473072e585710233c4d828
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'Args' of the struct:
- 'k_proc' in the file include/microkernel/base_api.h
- 'k_args' in the file kernel/microkernel/include/micro_private_types.h
Change-Id: I5847a2f1e9c7dd34dea37857b4fadeb37ced489b
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'fabort' of the struct:
- 'k_proc' in the file include/microkernel/base_api.h
Also rename variable instances related to this struct field.
Change-Id: I9523a567b23c578e73c20810e33a15ba733ba238
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'fstart' of the struct:
- 'k_proc' in the file include/microkernel/base_api.h
Also rename variable instances related to this struct field.
Change-Id: Ic9750c0bcaefd1dcedfefe94b8cdd31519ab5249
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'Group' of the struct:
- 'k_proc' in the file include/microkernel/base_api.h
Change-Id: I0d83ec7e82c67a7c2c37df8bb0a5d83b2109a8ed
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'State' of the struct:
- 'k_proc' in the file include/microkernel/base_api.h
Change-Id: I545ad7fa0a9b1f100dfb9a639e6730bee5d30905
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'Ident' of the struct:
- 'k_proc' in the file include/microkernel/base_api.h
Change-Id: Iec787e0a8aa1791c968b371017cf96211a60cef1
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'Prio' of the structs:
- 'k_proc' in the file include/microkernel/base_api.h
- 'Elem' in the file include/misc/lists.h b/include/misc/lists.h
Change-Id: I2fd6966af29b998a3849bcabc5cfee110e76202c
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'Back' of the structs:
- 'k_proc' in the file include/microkernel/base_api.h
- 'k_timer' in the file kernel/microkernel/include/micro_private_types.h
Change-Id: I0c7cec34ec64462f85f43f8da4e61d4a651ac14e
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'Forw' of the structs:
- 'k_proc' in the file include/microkernel/base_api.h
- 'k_timer' in the file kernel/microkernel/include/micro_private_types.h
- 'k_args' in the file kernel/microkernel/include/micro_private_types.h
Change-Id: Ie45a71943dca9cb16b53bbc345d1ea16f8d7c50b
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'poolid' of the struct:
- 'kmemory_pool_t' in the file kernel/microkernel/include/micro_private_types.h
Change-Id: I96466891ed2efca8c06bd94b40d15bd478d0de33
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Add the sleep events point for x86 and ARM arquitectures that gives
information about when the CPU went to sleep mode, when it woke up
and which interrupt causes the CPU to awake.
Change-Id: Iaa06a678eab661357d084ee1f79c4cfcf19bf85d
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Add the interrupt profile points for x86 and ARM arquitectures. This
gives information regarding the time when interrupts occur.
Change-Id: Ic876c0e7f9e8819d53e0578416f09146f4456d3d
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
The drivers provide _sys_clock_cycle_get(): moving the public APIs to
the drivers allow them to be aliases of it.
Change-Id: Ic5975a048f2b51f94510f0c3cd5e6ab3a8907718
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
These two were dropped during the conversion to Kbuild.
NOTE: THREAD_MONITOR was originally called CONTEXT_MONITOR.
Change-Id: Id17f51ee5848a9c9aea3cd3c5aa963492efdf4a8
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Make these public:
- SECONDS(x): macro that gives the number of ticks in x seconds
- MSEC(x): macro that gives the number of ticks in x milliseconds
- MSEC_PER_SEC: number of milliseconds per second
- USEC_PER_MSEC: number of microseconds per millisecond
Change-Id: Ic5dbf9349651a477b066edb0c6b6721da2b7e5bb
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The term 'context' is vague and overloaded. Its usage for 'an execution
context' is now referred as such, in both comments and some APIs' names.
When the execution context can only be a fiber or a task (i.e. not an
ISR), it is referred to as a 'thread', again in comments and everywhere
in the code.
APIs that had their names changed:
- nano_context_id_t is now nano_thread_id_t
- context_self_get() is now sys_thread_self_get()
- context_type_get() is now sys_execution_context_type_get()
- context_custom_data_set/get() are now
sys_thread_custom_data_set/get()
The 'context' prefix namespace does not have to be reserved by the
kernel anymore.
The Context Control Structure (CCS) data structure is now the Thread
Control Structure (TCS):
- struct ccs is now struct tcs
- tCCS is now tTCS
Change-Id: I7526a76c5b01e7c86333078e2d2e77c9feef5364
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Remove last remaining legacy naming of 'proc' from the kernel's symbols.
Change-Id: Ide4ff3d06a74c5e6178c01e62a719e81709935c2
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This will allow renaming K_CREF.proc to 'task'. It also is really
representing a task ID, i.e. the value a user passes to microkernel
APIs.
Change-Id: If2dd3f1ed5ce93178acd4713ad5497e5b3e0401d
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
k_proc was a legacy leftover that does not make any sense, since there
is no concept of a "process" in the system. Rather, that data structure
refers to a 'task control block', i.e. the representation of a task
execution context from the microkernel's point-of-view (not to confuse
with the 'struct ccs', the representation of a thread execution context,
from the nanokernel's point-of-view).
Change-Id: Ic29db565af023be629ce740bbcb652ece7dc359f
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The stucture elements neet to me 32-bit aligned for ARM platform.
Change-Id: I269753cbfec5e45880833e1fc036921a0f274d23
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
The new names reflect better what the functions do: they find the first
bit set starting from the least or most significant bit, i.e. they find
the least or most significant bit set, in a 32-bit word.
Change-Id: I6f0ee4b543f6f37c2f08f7067e14e039c92a6f6a
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Standardize on using the find_[first|last]_set (non-inline) symbols
everywhere.
The non-inline versions provide absolutely no benefits, so they will be
removed in a subsequent commit, and the inline versions will have their
_inline suffix removed.
Change-Id: I5b3dee33ffe3878a05e1bb3c6400a8d8c1640ad4
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Standardize on using the irq_lock/irq_unlock (non-inline) symbols
everywhere.
The non-inline versions provide absolutely no benefits, so they will be
removed in a subsequent commit, and the inline versions will have their
_inline suffix removed.
Change-Id: Ib0b55f450447366468723e065a60adbadf7067a9
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Basically, this does not work anymore:
task_timer_start(<timer>, 0, X, <sem>);
since it does not make much sense to have a timer with an expiry of 0
ticks. The code internally was setting the duration to be equal to the
period anyway. So, to achieve the same behaviour, do this:
task_timer_start(<timer>, X, X, <sem>);
This has the positive side-effect of removing a small block of logic
that was handling the cases where duration was 0.
Change-Id: Ic4af4a17a129f14af4fea445bcaddabe89c27131
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
They use the same logic and _k_server handler, so only have one
implementation of the user-facing API.
Instead of using ENDLIST, create a new internal _USE_CURRENT_SEM symbol
that reflects what the implementation is doing.
Change-Id: I5c50efd15f4e97b778b4b5efd5ec931384a8631f
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Reflect the fact that they are not used.
Change-Id: I6ea83cb2c7532e10988cbf4350edccb78f444328
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Align with the newer terminology used for microkernel internal symbols.
Change-Id: I623b383f90d9e37a49429a79774c7f7a4953bd5f
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
irq_handler_set, irq_priority_set and irq_disconnect have been made
private by prepending an underscore to their names:
irq_handler_set -> irq_handler_set
irq_priority_set -> irq_priority_set
irq_disconnect -> irq_disconnect
The prototypes have been removed from header files when possible, and
extern statements used in C code where they were called.
_irq_priority_set() for ARM is still in the header file because
IRQ_CONFIG() relies on it.
Change-Id: I2ad585f8156ff80250f6d9eeca4a249a4477fd9d
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Doing those checks went against the Zephyr philosophy of no error
checking unless absolutely necessary. Users should ensure themselves the
validity of their inputs to kernel APIs.
Change-Id: I21e5cd07ff9424ad61e81fd9d52ceef0c9584a8c
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
task_event_set_handler -> task_event_handler_set
Align with the "verb at the end" convention.
Change-Id: I8b72d41a20a7fdd4756f90765682e317289a241b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
task_pipe_put_async -> task_pipe_block_put
task_mbox_put_async -> task_mbox_block_put
task_mbox_data_get_async_block -> task_mbox_data_block_get
task_mbox_data_get_async_block_wait -> task_mbox_data_block_get_wait
task_mbox_data_get_async_block_wait_timeout ->
task_mbox_data_block_get_wait_timeout
Previous names, focusing on 'async', were misleading, because:
- some of those APIs can be used synchronously as well
- other APIs can also do asynchronous transfer, and don't have 'async'
in their names
- the key concept of these APIs is that they use memory pool blocks
rather than raw data buffers.
Change-Id: I0c08a6cf950ab23bb4172ce25eb6f9886b037649
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Add the context switch profile point for x86 and ARM arquitectures.
Change-Id: Ib7205059104ed47b96ba75b8cfefec3ff35f6813
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Add a standardized mechanism to add profiling points to the Kernel
with a single interface for the user to collect the profiling data.
Change-Id: I4fa34ac1b42f73a73ba1fd805e755ee2fd00dff7
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Add a log event tool with a single interface for the user to
add/collect the event log data.
Change-Id: Ia4b78836748c5d7e44ba1bdd50c28434e8a55d65
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Fix documentation to link to autogenerated API entries.
Change-Id: I0355435c189bff17c4468b1f300dcffcce73e51d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Removes the non-PIC disabling PIC code as the PIC is not a supported interrupt
controller. The PIC disabling code remains as it is needed to prevent the
generation of spurious interrupts from the PIC (see CONFIG_SHUTOFF_PIC).
Change-Id: Ic59aa17ab96f34685a5d7b5f24cab391de47edca
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The _k_mem_map_list was a static array generated by sysgen,
where it containing all pre-defined memory maps from MDEF file.
To support private memory map objects (aka, defining them within
source files), the list has to accommodate memory maps that
are not only processed through sysgen, but also those defined
within source files.
This is done by creating a new section in binary, and all memory
map pointers go into this section. By doing this, the list
can still be manipulated as an array.
Change-Id: I1f3414b72f685fef4b99850749178661f14d9345
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The opaque memory map object id type is now a pointer to
the associated memory map structure, rather than an index
into the microkernel's array of memory map structures.
This change is a pre-requisite to support for private
memory map objects, which are defined in source code.
Change-Id: I82ecb59eeed00efa54f781f775710c92ff9c9fc9
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The _k_pipe_list was a static array generated by sysgen,
where it containing all pre-defined pipes from MDEF file.
To support private pipe objects (aka, defining pipes within
source files), the pipe list has to accommodate pipes that
are not only processed through sysgen, but also those defined
within source files.
This is done by creating a new section in binary, and all pipe
pointers go into this section. By doing this, the pipe list
can still be manipulated as an array. The reason behind
putting the pointers to pipe, instead of the pipe objects
themselves, is that some compiler/linker may pad the large pipe
struct. For example, compiling under gcc and march=i686 pads
the struct to 32-byte alignment (march=atom to 64-byte alignment).
This causes issue with sizeof() and pointer arithmetic because
they have no idea about the padding. So use pointers here to
prevent padding.
Change-Id: I6d3b75614c4d8760c037a5c26746410d4e4b17cb
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The opaque pipe object id type is now a pointer to
the associated pipe structure, rather than an index
into the microkernel's array of pipe structures.
This change is a pre-requisite to support for private
pipes, which are defined in source code.
This also moves the required struct into more visible
headers such that private pipes can be declared.
Renaming the struct is also being done to conform to
naming convention for private kernel objects.
Since a couple structs have to be moved anyway, so
do the moving and renaming here too (contrary to what
have been done in the past, with separated patches).
Change-Id: Ibb6ec7f62745a81439ae3ea2616688b757439843
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The _k_task_list was a static array generated by sysgen,
where it containing all pre-defined tasks from MDEF file.
To support private task objects (aka, defining tasks within
source files), the task list has to accommodate tasks that
are not only processed through sysgen, but also those defined
within source files.
This is done by creating a new section in binary, and all task
objects go into this section. By doing this, the task list
can still be manipulated as an array, which is required for
task group operation.
Change-Id: I799d6967567079498bc414e0cb809e8af856b53e
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The opaque task object id type is now a pointer to
the associated task structure, rather than an index
into the microkernel's array of task structures.
This change is a pre-requisite to support for private
task objects, which are defined in source code.
Change-Id: Idb53ea7f8a8a5b7e6477a74273930b08fc77dcfe
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The opaque timer object id type is now a pointer to
the associated timer structure, rather than an index
into the microkernel's array of timer structures.
This is simply to be consistent with other microkernel
objects, such as semaphore, mutex, and mailbox.
Change-Id: If803e22ae450d4ef28e81e8a5f2451b9c26c6dce
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This is in preparation to enable private mailbox support.
The struct needs to be moved into more visible header
so private mailboxes can be declared. This also renames
according to naming convention to be private kernel
objects.
Change-Id: Ibd75497e726efd447d27f3bfd0b4695ed1695693
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The opaque mailbox object id type is now a pointer to
the associated mailbox structure, rather than an index
into the microkernel's array of mailbox structures.
This change is a pre-requisite to support for private
mailboxes, which are defined in source code.
Change-Id: Ide832eee2a0762e601847ad07afba380bd79ed8b
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This is in preparation to enable private FIFO support.
The struct needs to be moved into more visible header
so private FIFOs can be declared. This also renames
according to naming convention to be private kernel
objects.
Change-Id: I9b90ddccbaf01ff8c7e2ef03c926d0328dd7ec39
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The opaque FIFO object id type is now a pointer to
the associated FIFO structure, rather than an index
into the microkernel's array of FIFO structures.
This change is a pre-requisite to support for private
FIFOs, which are defined in source code.
Change-Id: Ieb1343d6d5dd1b747063603457d47fab2710f557
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This is in preparation to enable private semaphore support.
The struct needs to be moved into more visible header
so private semaphores can be declared. This also renames
according to naming convention to be private kernel
objects.
Change-Id: I84ac7d580404ac5e1753c1bd446d38993fd23310
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The opaque semaphore object id type is now a pointer to
the associated semaphore structure, rather than an index
into the microkernel's array of semaphore structures.
This change is a pre-requisite to support for private
semaphores, which are defined in source code.
Change-Id: I3821360be35237bfe3bf090efce84f99e335d309
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This is in preparation to enable private mutex support.
The struct needs to be moved into more visible header
so private mutexes can be declared. This also renames
according to naming convention to be private kernel
objects.
Change-Id: Ifccb60a837b44e443be0b091c2df4f06373718fe
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The opaque mutex object id type is now a pointer to the associated
mutex structure, rather than an index into the microkernel's
array of mutex structures.
This change is a pre-requisite to support for private mutexes
(i.e. mutexes not defined using a project's MDEF file).
[DL: fix some whitespace issues.]
Change-Id: Ida419f1674df245f51a36d28ca7d4631239f1edd
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This change removes the internal number-to-function mapping
of microkernel services. Instead, function pointers are used
to specify which service to use.
This is in preparation for private kernel objects. Before this,
only kernel objects that are defined in MDEF files would have
corresponding functions included in the final binary, via sysgen
by populating an array of number-to-function mapping. This
causes an issue when a certain type of objects are all defined
with source code, and never in MDEF file. The corresponding
mapping would be deleted, and the functions are never included
in the binary. For example, if no mutexes are defined in MDEF
file, the _k_mutex_*() functions would not be included.
With this change, any usage of private kernel objects will hint
to the linker that those functions are needed, and should not be
removed from final binary.
Change-Id: If48864abcd6471bcb7964ec00fe668bcabe3239b
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Fix the structure members alignment to avoid problems
when GCC allocates 1 byte for a member of enum type.
Change-Id: I9f28c72d2e5359216ada921d4d5ce32d55cbdd45
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Fixes the SYS_CLOCK_HW_CYCLES_PER_SEC Kconfig option dependencies such that
it can be overridden by a modified platform configuration file. This is
particularly important for the LOAPIC timer driver as
SYS_CLOCK_HW_CYCLES_PER_SEC is dependent upon the target's CPU/bus frequency.
Change-Id: I0fb49b4c540888cb1988c76e2a711a85e756f82c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
This commit moves the comments from the nano_sema.c file to the
nanokernel.h file.
Change-Id: Ia1d517da38807d096b349331da72c9c4a81fb44e
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Moves the nanokernel LIFO in-code comments to the .h file. The comments
were changed to the Javadoc Doxygen format. A comment per alias was
created based on the original comment.
Change-Id: Iacd6bf1136ceac439d05669ef51cf28b858b306b
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Updates the comments in ctors.c to more accurately reflect the current
state of constructors.
Change-Id: I8bea13ac9b56b4d7c6ce793f175666506fffa446
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Move the comments from k_event.c file to event.h. Only external API information was moved.
Minor changes to adapt comments and parameters.
Change-Id: I05124fc48720105a246826c94f3f21a6e30d6043
Signed-off-by: Javier B Perez Hernandez <javier.b.perez.hernandez@linux.intel.com>
This commit moves the comments from the k_semaphore.c file to the
semaphore.h and kernel_main.h files.
Change-Id: Ica86945e738f1f61b8ed216981bce55351029645
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Adds documentation to the header files for memory map
adopting javadoc style.
Change-Id: I25ba2b938ea7dc490af97899b4eb10d16351739a
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Moves the comments from the k_fifo.c to the fifo.h file. Only the
external API information was moved. Minor edits were performed to adapt
the comments to different parameters and aliases.
Change-Id: I69d2d009f7ec6390e0a2fc9d6a346ddc0111f9f1
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Moves the comments of the nanokernel FIFO external APIs from nano_fifo.c
to nanokernel.h.
Change-Id: Ic31e6da8a2f7a4099adc2e847d237b5a73787a23
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The ChBuff structure no longer exists; it was previously changed to pipe_desc.
Change-Id: Ife72db4a186db1d3af447141fefb47f2136b544f
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The routine K_ProcWR() no longer exists; it was previously changed to
pipe_read_write().
Change-Id: If084a45a8593cfe988ee5db0507695ec2191b409
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Renames CHECK_CHBUFF_POINTER() macro to CHECK_BUFFER_POINTER() to remove
references to obsolete "channel" terminology.
Change-Id: I3154e7af04cc9afa8b935ddf61555c15c7d2659d
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
There is no need to refer to the server's command stack as a 'channel'.
Change-Id: I5c0fd599ba25478f1c4a9e96c015746b205df469
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
These comments now use the newer 'pipe' nomenclature.
Change-Id: Id09b58d7174d7989eaae4dabe0086ab988c7746f
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Change the function signature of _InitHarware() function and rename
the function to a platform specific name now that it will be called
via a function pointer and not by name.
Call the platform *_init() function at PURE_INIT time.
Change-Id: I5168dfea81f406da135d491a2b4a24e8255f418a
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Split the pure init level into two phases this allows for easier
migration of the nano kernel init process without resorting to naming
or link order to force the ordering of functions at pure init
time. The need for change was discovered while moving the system
timers to be initialized by the init system. The base timer driver
(eg. HPET) must be initialised prior to the system clock being enabled
both of which need to happen before nano-kernel init.
Change-Id: I7a2994965e48a891a78268080113ac8fccceb261
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Update microkernel systems to use the new driver initialization model on the
timer driver.
Change-Id: Ida9ef2a395d0dddf4104d490d78b13b11ea3c347
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Update nanokernel systems to use the new driver initialization model on the
timer driver.
Change-Id: I22d8619f56052f094482d73ab34c9d610492d8c0
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Prepares the _sys_clock_driver_init() routine to interface with the new driver
model. To this end, it must accept a pointer to a device structure and return
an integer.
Change-Id: I3c600ce1efb49c0864aae7b09663ca40d6289372
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
() Adds documentation to the header files for mutex.
() Update whole @file documentation in the mutex source
code to javadoc style, and adds some missing param fields.
Change-Id: Ic54d830ea3382aac94cf93e58cc9eb66e1a241b7
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Move documentation comments to header file and prep
them for doxygen.
Change-Id: I3180cba7c86af97e3b4c0fceb0e1aa523ed4d219
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Eliminates references to obsolete "channel" terminology and aligns
the names to Zephyr OS naming practices.
Change-Id: Ie4205bda5529a6f8aebfa63aa5a87eb6aef85bc9
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Eliminates references to obsolete "channel" terminology in parameter
names used by the following pipe get/set utitlities:
_k_pipe_option_get() _k_pipe_option_set()
_k_pipe_request_type_get() _k_pipe_request_type_set()
_k_pipe_time_type_get() _k_pipe_time_type_set()
Change-Id: Id6fb803d77d9d775726e67bd48d35e10e908ff61
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Eliminates references to obsolete "channel" terminology.
pipe_xfer_req: used with read/write xfer requests
pipe_read_req: used with read only xfer requests
pipe_write_req: used with write only xfer requests
Change-Id: Ia09b7d7b82a568e34adceea3683c8ebde07229a1
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Simplifies routines _k_pipe_put_request() and _k_pipe_get_request() by
avoiding an unnecessary pointer assignment.
Change-Id: I5677826bbbec70124dbc951f102885e5b32aad65
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Eliminates references to obsolete "channel" terminology and improves
code quality by providing more descriptive names.
Change-Id: Ic5f9f9b482c1769e15563c50241f578bf0d1baa1
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Eliminates references to obsolete "channel" terminology and improves
code quality by providing more descriptive names.
Change-Id: I4135dfc98c13899ec4d2b0befb23822712c668ae
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Eliminates references to obsolete "channel" terminology and improves
code quality by providing more descriptive names.
Change-Id: I4c921db1777975210c1ea3d4ab72107ca6d4f589
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Eliminates references to the obsolete "channel" terminology.
Change-Id: Ic5f375b36fbd234f158a11dfbfd010d3a05a844c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Not only does this rename eliminate references to the obsolete "channels", it
better identifies the purpose of the structure.
Change-Id: Ib9c730b0e57b51b562ca0b5c1f5c9aaa3bdcce70
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Simplifies routines _task_pipe_get(), _task_pipe_put() and
_task_pipe_put_async() by avoiding unnecessary copying of
k_args_args field.
Change-Id: Ie8b77502d6e1f0e655950f47e766a5e6378d1812
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Fixes whitespace issues to comply with checkpatch.
Change-Id: Ic6501158e06a25d616072611e73575a1dc812dab
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The revised name conforms to Zephyr OS naming conventions.
Change-Id: I5bcdaf1df7da9d8ce5787a08b29ead91dd8f24ce
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Removing the parameter to timer_driver() as it is not used.
Change-Id: I09275287eeb541be0dd315056b4f2bc6cbc2573c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Remove function name from comment and add @brief instead.
Also capitilize first letter.
Change-Id: Ib708b49bf02e5bc89b0066637a55874e659637e0
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Previous comment style used RETRURNS:, use @return to comply
with javadoc style.
Change-Id: Ib1dffd92da1d97d60063ec5309b08049828f6661
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The change replaces multiple asterisks to ** at
the beginning of comments and adds a space before
the asterisks at the beginning of lines.
Change-Id: I7656bde3bf4d9a31e38941e43b580520432dabc1
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This private API now follows Zephyr OS naming conventions.
Change-Id: I59e2595764fe06ab32b7c4b9468c0f830ff44e9e
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
This private API now follows Zephyr OS naming conventions.
Change-Id: I3cf5042acff7b299ffee4189dde1a3ef403b0d84
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The name of the private internal function ChReqSizeLeft() refers to the
obsolete "channels" name. Furthermore, given both its infrequent use and
its size, it is simpler to expand it inline and get rid of the function
altogether.
Change-Id: I025d8e48e4a4c26f501ed78d63b5c80f7950fe2b
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The name of the private internal function ChReqSizeXferred() refers to the
obsolete "channels" name. Furthermore, as it is merely a wrapper for getting
the value of the iSizeXferred field, it is simpler to just access the field
directly.
Change-Id: I1e56b434cc6445b52ff72b9304fd9da9b91e7050
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The name of the private internal function ChReqGetStatus() refers to the
obsolete "channel" name. Furthermore, as it is merely a wrapper for getting
the value of the Status field, it is simpler to just access the field
directly.
Change-Id: Ia48173606ade7b62e4b53f56d759468ced90494a
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
This private API now follows Zephyr OS naming conventions.
Change-Id: Id6fa98bf5c913eebae746e3a63ab5e96fad74e46
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
This private API now follows Zephyr OS naming conventions.
Change-Id: Ice8b3be8fc91c6e467a42fa5da8e19ced5a5e779
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
This private API now follows Zephyr OS naming conventions.
Change-Id: If1ba71b21971285b7ae2544f63c10f0ba261ced9
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
This private API now follows Zephyr OS naming conventions.
Change-Id: I9797b7eccddc8ce45623a4d0a4ba4cef63bc5e0e
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
This private API now follows Zephyr OS naming conventions.
Change-Id: I01ee78dcf604be90348384733f67766c11ad234e
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
This private API now follows Zephyr OS naming conventions.
Change-Id: I9991671ee816bc8f5c2f509015e60b554c671489
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
This private API now follows Zephyr OS naming conventions.
Change-Id: Ic92cacbcb1adf82946a5828cf60d4d98a95b9d74
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The routine ChannelCheck4Intrusion() is only used in k_pipe_buffer.c.
Change-Id: Ib478b24f2c8995bb0e1c13bf4ace3cb868887762
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
These private APIs now follow Zephyr OS naming conventions.
Change-Id: I8c8bb9bb6377e7cc2bf08136bd5ef2587c52028d
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
This private API now follows Zephyr OS naming conventions.
Change-Id: Ic8b1d4673862263d90d240e749a272d01a53679e
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
These private APIs now follow Zephyr OS naming conventions.
Change-Id: Ia11a082e46456d12a3d6af7dfb2f34c29c137cb2
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
These private APIs now follow Zephyr OS naming conventions.
Change-Id: I63815013be2d3b01463563d17f05aac28b27ce04
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The pipe kernel service routines are now only declared in kernel_main.h.
Change-Id: I20848b0b72af4a2a6fd3f0bb07f0e0ae546087ae
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The summary line no longer mis-identifies the file as K_ChProc.c
Change-Id: I0be0e302cd8d91903c60706175fee955d6993ebc
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Fixes two instances where there were two spaces between words instead of one.
Change-Id: I9c50e90868532e820f85888c1b23bd7d44e7e1c1
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changing the spelling to comply with the checkpatch tool.
Change-Id: I7f28fd73bfbc89d91e4d7caccffa2c018dcadf6d
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Add the call sites for the various init levels defined by the init
system.
These call sites are noops if there is no init proceedure registered
at a given init level.
pre_app_init has been renamed to app_early_init and late_initconfig to
app_late_init to better reflect the ordering and intended use of these
init levels
Change-Id: I71e38d936a97da8fe163f4b7cf0ce6725f1c903e
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
The revised name better reflects the fact that the file defines
macros in addition to declaring variables. In addition, most of
these APIs use the "sys_clock_" prefix, which aligns well with
the new file name.
Change-Id: Ib33517d4b19ec2455303b87200c677e87640fcbc
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Eliminates unnecessary "offsets" subdirectory, and aligns file
name with gen_offset.h which resides in the same directory.
Change-Id: I8cea3bc54b5ceae3091d4a5c77c59ab826339f75
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Eliminates use of non-standard camelCase file name.
Change-Id: I809de5f72b40adfd49cbc128992de934e3ec66e3
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The new name better reflects that this file contains all private
nanokernel APIs that are used by various kernel subsystems.
Change-Id: I4c258d582e93753eec9e575fdb5f9f2109417a0f
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The new name better reflects that this file contains all private
microkernel APIs that are used by various kernel subsystems.
Change-Id: I5e52172a9e33aa130ce55ce59e887bba5c1c175a
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The new name better reflects that this file contains private
microkernel APIs (types, structs, etc.) that are used by various
kernel subsystems.
Change-Id: I7a89be893455b3daaf30baa40a0ec8e0cde7cc36
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
File contents moved to the nanokernel initialization file, since
they don't warrant their own distinct source file.
Change-Id: I61329067a077c421e2889c745ea44eef78ce37cb
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This file contains microkernel initialization code, along with a few
global variables.
Change-Id: Ic4e39c844d39866b38bb6d074e7035d759e073cd
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Adds the k_ prefix to files that don't have it. This emphasizes the
fact that the microkernel is the *real* Zephyr OS kernel, rather than
the nanokernel. Also, the k_ and _k_ prefixes are used for many private
microkernel APIs contained within these files, so using the k_ prefix
for these file names makes sense.
Change-Id: If3a5e786edc6503fa8a24f5638ece2e1df021547
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Now spells out the name of the associated microkernel object in full.
Also renames file containing FIFO code to correspond to the associated
public include file (microkernel/fifo.h).
Change-Id: I47f7a2ca01e0feff8f499acda0000fe475e7ee5a
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Now spells out the name of the associated microkernel object in full.
Change-Id: I608404a762cf9d1100d58fe80c82c0e40ada2ff1
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This file defines public microkernel APIs that are utilized
by more than one of the microkernel object types. It contains
both types and symbolic constants.
Change-Id: I2bc39ffe6655e5ddeec1e55c4caee01e02526595
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
In order to provide the same irq_connect() on all platforms
on x86, irq_connect() now uses a static array of interrupt
stubs. Device driver does not need to provide interrupt stub
to irq_connect() function.
Add NUM_DYNAMIC_STUBS configuration parameter, the number
of interrupt stubs used for dynamic interrupt registration.
Modify tests for unified interrupt register API
Tests that deal with interrupts are modified to work
with the new interrupt registration API.
Add CONFIG_NUM_DYNAMIC_STUBS option to dynamic interrupt projects
Projects that use dynamic interrupt handler registration on x86
have to include CONFIG_NUM_DYNAMIC_STUBS parameter in the
configuration.
Change-Id: Ic90c726485521a57cf695fd3edc8cac85d0b827d
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
CPU_CORTEX_M3_M4 replaces CPU_CORTEXM3 as the umbrella option for Cortex M3/M4
processors.
NOTE: Selecting CPU_CORTEXM4 still currently forces the selection of
CPU_CORTEXM3. Breaking that forced select will be done in a later commit.
Change-Id: I0f36b3a2adc5c6c66db4e9b6353b921199544deb
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Allow configuring nano timeouts. They are disabled by default.
Change-Id: I9db0b632681ae149295acd3ed81fccdee2c4f91a
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The microkernel now announces the nanokernel ticks, and takes them into
account when computing the amount of time to stay in tickless idle.
This allows code linked against a microkernel to use the nanokernel
timers and timeouts.
Change-Id: I9436347e22fe76c2c1a314589ffc041a9a1a99a4
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The nanokernel time tracking code (ticker) can now exist in microkernel
systems. This allows the ticker that drives nano timers and timeouts to
advance the tick count for these in a microkernel, thus allow their
presence there. Previously, nano timers could not be used in a
microkernel.
Change-Id: I17f2b659691a081b0f9bf3961ed030533aa02a15
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This interface can be called by the microkernel to obtain the earliest
expiring nanokernel between the timers and timeouts, to allow the idle
code to take the correct decision w.r.t. tickless idle.
Change-Id: I9598ec2a0dd013a6a8ccc95d50105bb98ca27f54
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The system clock code only references it, it should not own it.
Change-Id: I38eb61599eb66458d5a3c3c9713cf11dc14e8a63
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Add the necessary call to dequeue the nano timeouts when a tick occurs
in the nanokernel.
Change-Id: I26fdfc4084d7564e232d8240eab8915076deaa31
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The nanokernel timers and timeouts won't be dependent on each other, so
the expiry handling code needs to be able to only contain the necessary
code depending on what is enabled in the kernel.
Change-Id: Ibb7c31e926a56ebd3e22b8eac6db05faa1c8ddd3
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The nanokernel timers will be available in the microkernel, but can be
disabled if not needed. A kconfig option is needed for that: the option
is enabled by default, and only available in the nanokernel for now. It
will be made available in the microkernel in the future.
Change-Id: I3910affde7bd2e7b25ab0a3c655255a9be01c9b8
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Add the _timeout() variants to the _get_wait() routines. Those allow
waiting with a timeout. The return values are the same as for the
regular _get() routines: a valid pointer on success, NULL on failure.
Note that the task_ variant is still polling, and the task is not put on
a timeout queue, instead polling for the ticker change in addition to
data arriving on the LIFO.
Change-Id: Iad8fa00b3fa0656fee9a67b2dd8b316e1e8aac74
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Add the _timeout() variants to the _get_wait() routines. Those allow
waiting with a timeout. The return values are the same as for the
regular _get() routines: a valid pointer on success, NULL on failure.
Note that the task_ variant is still polling, and the task is not put on
a timeout queue, instead polling for the ticker change in addition to
data arriving on the FIFO.
Change-Id: I6650d0de8494c15698d670442da1e9c8d8c89910
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Add the _timeout() variants to the _take_wait() routines. Those allow
waiting with a timeout. The return values are the same as for the
regular _take() routines: 1 for success, 0 for failure.
Note that the task_ variant is still polling, and the task is not put on
a timeout queue, instead polling for the ticker change in addition to a
semaphore state change.
Change-Id: Idef357f99a5ca30e20665a25abc54d253a848a52
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This new API allows starting a fiber with a delay. It returns a handle
to allow cancelling it before the fiber starts, via the cancel API.
It also adds an API allowing a fiber to sleep for a given amount of
ticks.
NOTE: CONFIG_NANO_TIMEOUTS must be enabled.
Change-Id: I608dc47b5f08321cfd0c1dd9bb18d1d77eab87e3
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
s_NANO contains the timeout queue, and each ccs needs a struct
_nano_timeout object that gets linked in the nanokernel timeout queue.
Change-Id: Iad027eaaebcffe190e95f0b9d068f047062559c2
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The timeout queue interface will allow having fiber interacting with the
nanokernel objects wait with a timeout. It can be completely excluded
from the kernel if not needed, via the CONFIG_NANO_TIMEOUTS option.
Most of the timeout queue interface is contained within timeout_q.h.
However, this file should never be included directly: rather, the
wait_q.h file is to be included instead, which itself provides NOOP
abstractions for some timeout functions when timeouts are not enabled in
the kernel.
Change-Id: Ifeb1b934e0c71d00c59ebc88a54ab26e49686807
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Rename nanokernel's _do_sys_clock_tick_announce() to
_nano_sys_clock_tick_announce() so that it can be called from the
microkernel tick handling code without name ambiguity.
Change-Id: I2ec9dd92ceda51f00be1dd95bc3239d6b2e82943
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
These private APIs now follow Zephyr OS naming conventions.
Change-Id: If9de2528d740eb4ff16a69649564592a5f047c61
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
APIs now follow Zephyr OS naming conventions.
Change-Id: I554e63b989029e08a1d215c9b5a511a32a91e42c
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
APIs now follow Zephyr OS naming conventions.
Change-Id: I154536d2c40784ae83a936c55cf748173343c681
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The following APIs now use an approved Zephyr OS prefix:
_pipe_init
_mem_map_init
_mem_pools_init (also loses plural aspect)
init_node
init_drivers
kernel_init
kernel_idle
Change-Id: Ic380c56b09cb870d44c51fd12c6c0e0a13e9b4e3
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This API now uses an approved Zephyr OS prefix.
Change-Id: I3ec6d3ac3a3b7ae2edd1024a39ce73796f060fba
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This API now uses an approved Zephyr OS prefix.
Change-Id: I79c7e82e73653315ba1a609edbf11336694b9dd4
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This API now uses an approved Zephyr OS prefix.
Change-Id: I1041b982492ea7b76213e3b57cf28a9f17e7fd9d
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
These declarations do not need to appear in minik.h, since it
already gets them by including kernel_main.h.
Change-Id: I35ff9cc2d371c60a08a7cf8bde289f467a259dea
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
These routines are only referenced in a single file.
Change-Id: I55d2976d1db612bdbb89224b89b84bfcc5b9d707
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
These 3 declarations no longer appear twice in the same include file.
Change-Id: Ia77b84c29741978bea2d74b44d66e9929d2769c4
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
- Removes unnecessary comment about API being private.
- Removes misleading comment about processor-specific APIs.
- Makes purpose of "service codes" clearer.
Change-Id: I4715609f328b9fa7f334a1b4c3c21441111f228d
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This API now uses an approved Zephyr OS prefix.
Change-Id: Ia16829d908da9bfaa82f82da47b583a0004cae7d
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This API is now a private microkernel API.
Change-Id: I5b26aa927d42923f2076d06f9bdfef371572543e
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The size of the k_args strcture must be equivalent to ...
CMD_PKT_SIZE_IN_WORDS * sizeof(uint32_t)
This is complicated by the fact that not only do different compilers treat the
size of 'bool' and 'enum' types differently, they may also pad structures
differently. Both of these differences have direct impacts on the k_args
structure. To work around this, the k_args fields 'alloc' and 'Comm' are
forcibly aligned to a 4-byte boundary, while the rest of the k_args structure
is packed.
Change-Id: I722f1a585e5e34a7a7218ed0b214b54fac6d39f7
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Eliminates references to the obsolete OS name. In most cases the
name is simply removed, as it isn't necessary.
Change-Id: I32f9e7390e436aec008a9454b72657e129d65152
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Revises names and/or descriptions to bring them up to date.
Change-Id: I5c1db102bfa0156526f1524084f5802e6df52a52
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This feature is still under development, so it's APIs shouldn't
be publicly advertised yet. And while they are being relocated,
they are renamed to adhere to kernel coding conventions.
Change-Id: I7a41d98e2fbb3b975fa42814cf64854f8cc0b623
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The tCCS type doesn't need to be publicly exposed; any public APIs
that need to use this kind of type should be using nano_context_id_t.
Change-Id: Ife1e73c4a21326bf54e2d52bfa1f1281245935a1
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Eliminates duplication of these entries by the various architecture-
specific include files for private nanokernel APIs.
Change-Id: I711c3b42fe375d1574ce4a540142c3b507b71557
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Introduces nano_internal.h, which will declare all architecture-
independent non-public nanokernel APIs. This file is automatically
incorporated by the various architecture-specific include files
for non-public nanokernel APIs, and will not normally be included
directly by any other files.
Change-Id: I9f3de812a5747cc720fa0ff739007315e8d07dd9
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
1) Renames routine to conform to kernel naming conventions.
2) Relocates routine declaration to include files for
non-public nanokernel APIs.
3) Relocates routine definition so that it resides with the
nanokernel's other fiber manipulation routines.
4) Eliminates an unnecessary argument to the routine.
Change-Id: Ia139280dfea36262ca8417708786b4989f3eaee1
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Since microkernel task monitoring is currently experimental
anything related to it shouldn't appear in a public include file.
Change-Id: Iff0e6137085ed0743fb34e97f5cee1bb98aecaed
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Since cputype.h no longer has any meaningful content it can be
eliminated, along with the arch-specific files it incorporated.
(This means that the arch-specific nanokernel public APIs are
now referenced only via cpu.h and its derivatives.)
Change-Id: I7f35b6c3c6c092d61c372ff85d73e49414474938
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Gets rid of places where there is no need to include these files
at all, or places where these files are being indirectly included
due to the inclusion of nanokernel.h.
Change-Id: I7b58148af454b977830c00a6b519a78d0595603b
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Several files were not explicitly including APIs that they reference,
which could eventually lead to trouble.
Change-Id: Ib33cadfa658280df3fcb4c670463d41b63097b31
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Gets rid of single-line comments required by a previous set of
coding conventions. These comments provide no value to readers
and just clutter things up.
Change-Id: I2a08b12cf5026253de56979efdfc510e7e68defe
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Revises kernel so that it uses the standard NULL symbol defined
for C99, rather than having its own custom symbol.
Change-Id: I74342f192e95899a83db879e8b1c8fe89ac8b92d
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Revises kernel so that it uses the standard boolean type library
defined for C99, rather than having its own custom boolean type.
Also revises sample projects that used the non-standard type.
Change-Id: Ib41b7f836da25352aa5ae9dfbbfdd29739017b6f
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The global variable _k_server_command_stack_storage is only referenced in
one file.
Change-Id: I62f327c77dfff2d6c553436f5e77a8053aa93031
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Instead of initializing the stack (when INIT_STACKS is enabled) in start_task()
and _fiber_start(), do it in _NewContext(). This helps to both reduce code
duplication AND ensure that all contexts get an initialized stack (previously
the background/idle task's was missed).
Change-Id: If2d50309d2be48fac937f5d0ae96b9de185c0fe2
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Add infrastructure support having multiple instances of a driver
configured into the system each with its own compile time
configuration information.
Change-Id: I1e447af18311139b43f74fe0439483ccd132b63f
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
According to section 3.7 of Documentation/kbuild/makefiles.txt, using
EXTRA_CFLAGS in Makefiles is "still supported but their usage is
deprecated." However, using make EXTRA_CFLAGS="-DSOMETHING" results in
EXTRA_CFLAGS from Makefiles being overwritten, obviously breaking the
build. This patch converts to them to the newer ccflags-y which also
fixes the problem.
Change-Id: I6309439599d4c9cc184f9ecd941bde841982ef07
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Since the address of the new context is known before _NewContext() is invoked
(due to it being passed a properly aligned stack), there is no longer any
need for _NewContext to return the pointer to the context.
Furthermore, as a direct result of the properly aligned stack, the pointer to
the new context does not need to be passed as a separate parameter since it
will always match the passed stack pointer.
Change-Id: Ie57a9c4ad17f6f13e8b3f659cd701d4f8950ea97
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Hoists the initialization of the the microkernel's idle task's stack fields
out of the runtime and into sysgen thereby removing microkernel code from
the nanokernel initialization.
Change-Id: I54cbbec9e875a52b5fa52562e1a2770cd3ac1cc3
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Updates the kernel defined stacks to ensure that they are properly aligned
by using the __stack tag.
Change-Id: I8514d38ee2e5bb2b2d87b17021db3c7f9c36a772
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
As it is impossible for GETTIMER() to return a NULL pointer, task_timer_alloc()
will never return INVALID_OBJECT.
Change-Id: I270732f31033d9ce55847dc9324f215680865273
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
It is a fatal error if the microkernel is configured with either too few
command packets or too few timer packets.
NOTE: During this refactoring of _Cget(), not only is it renamed to
_nano_fiber_lifo_get_panic(), but it is moved into "nano_lifo.c".
Change-Id: I1d866cda1b444da04877f7eda03762b6e83c9a6f
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Improves coding consistency by having _k_timer_alloc() use GETTIMER() instead
of _Cget().
Change-Id: I6575307ab6fe769bcf6dbf7e6c845b6cc4e338bd
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The toolchain-specific macros used to generate absolute symbols
are now part of the main include file for that toolchain, since
there doesn't seem to be a good reason to have them in a separate
file.
Change-Id: Ic97800485b20d6c5b23d14f69f67ee845cf076f5
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Eliminates the need to reserve the "kernel_" prefix in the
kernel namespace. Also, aligns versioning with other APIs
that are neither nanokernel_ or microkernel-specific, such
as the system clock APIs.
Change-Id: I81e43cd03849b45a4b432b0875dc8b1d5862dba9
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
1) Renames APIs to align them with conventions used by other
general-context nanokernel APIs.
2) Relocates implementation of these APIs to the architecture-
independent portion of the nanokernel.
Change-Id: I1aa60029aaa96697cd8fcb594bbae23ba6656661
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Since the kernel now provides a minimal string library, there is
no longer any reason not to use the standard memset() and memcpy()
APIs.
Change-Id: Iad587ace6f41fd94c9c961d13d9322495a7da1be
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
These routines are either unused, or are always used in manner
that does not require their added security checking.
Change-Id: I6f484924ebc3d395a20879445a2fcabebf6c5014
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Renaming the directory include/nanokernel to be include/arch, which
better reflects the real nature of the directory and the contents
inside.
Change-Id: I2bc33ebc6715e2f0403227a558279fdf52398ade
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Convert the existing non-public random number generation APIs
into public APIs (i.e. sys_rand32_init and sys_rand32_get).
Change-Id: Id93e81e351a66d02c08cf3f5d2dd54a3b4b213c5
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
This commit removes an old disclaimer used when the API_*
kconfig symbols were introduced.
Now the API_* symbols are removed, the disclaimer is not needed.
Change-Id: Icf8bc751a19c530c9ba0014ccaaab3eb0f228155
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit add license headers to Kconfig files.
Change-Id: I79e60263b8c7b696463ecc84b8ad411af5415117
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit removes the Kconfig symbols and dependencies,
introduced earlier to handle API's.
Change-Id: Ia8c13db876d1f570b815af1fd25fc0f9a0960f95
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
TiMo is very ambigous, be generic and call it kernel.
Change-Id: I66b3e436afbc89e874f31a89b98cc04aa821c787
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit removes the COMMAND PACKET kconfig symbol and
leaves the command packet service permanently in the build
process.
Change-Id: I814bb7f2f1a868490c1d0cc8d5cbea87bb39005c
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit updates the Kbuild to the last change in the tree.
ks_moved.c file was removed from the system.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: Ice4f1ec4f3629825640718e760ba025f68ad6355
This commit add support to the Kbuild system for the
NUM_TASK_PRIORITIES Kconfig symbol and the corresponding sysgen
parameter.
Change-Id: I6b035437c86d62f72c25d696d18182a7b0448e8f
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit removes the Kconfig symbol KERNEL_DIR.
The symbols was no longer needed because sysgen is only
used on microkernel architectures and the value of
KERNEL_DIR is always "ukernel", therefore it is redundant.
Change-Id: I5e38dd431c5b6f7586e8b25aea330632e96f581f
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit creates the Makefiles that describe the object-bundles for
the kernel directory and every sub-directory below.
It also includes the misc Makefile.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: I847e79a40ced0b1d8370b893cd95c15efc7e5147
This commit adds the Kconfig files that describe the CONFIG
symbols that belongs to the kernel directory and subdirectories.
It includes the misc directory Kconfig as well.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: I3e653562ea5c259203a63274197e3a0e1522ecc4
Several pipe buffer definitions now reside with the other
pipe buffer code. (One routine is also made non-global,
since it only referenced by the pipe buffer code itself.)
Change-Id: I76785d113edd62c9626a7116c9206472656128ec
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
1) Re-orders routines to eliminate the need for forward referencing.
2) Makes routines non-global if they are only referenced by pipe
buffer code itself.
3) Optimizes out an unnecessary wrapper routine.
Change-Id: I731db9c9125c58d98c5e350bdd1708456e2cf40c
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Brings file names into alignment with current naming conventions,
and relocates them to the main microkernel directory.
Note: Since the microkernel/channel directory is now empty, the
build system no longer attempts to build its contents.
Change-Id: I936c7cdf2e08f675dd66a87cacf3b4fa5a7a6441
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Relocates several marker-related routines that didn't reside with
the main set of such routines. This move allows one of them to be
made non-global, and the other two to be optimized out (since they
were now just unnecessary wrapper routines).
Change-Id: I517779be1778b032ee08654d244039ef36d30d1c
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Merges buffer-related routines into a single file, which also allows
a number of them to be made non-global (and eliminates the needs for
them to be declared in an include file).
Change-Id: Ib4fcf70afef548fd493540753f996a50c78f7521
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Uses a simpler algorithm to choose the lower priority value
(i.e. more urgent value) associated with the sender and receiver.
Change-Id: I4e8d2ff9678dfefdcd9941c96a75105841c73fcd
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Relocates non-public symbols to the locations they are really
needed (except for CHAN_DEBUG, which is dropped since it is unused).
Change-Id: I52743959a283fec675aa2b3168ef1a122a27ce55
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Merges related routines into a single file, which also allows a
number of them to be made non-global.
Change-Id: Ib749d3908b86a93bf97c0859861c6eaffe5f5f0a
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Merges the routines which process the four command packet types
used to process a pipe "put" operation into a single file, so that
the flow of control can be more easily comprehended. Also merges
the analogous routines which process a pipe "get" operation into
a single file.
Change-Id: I56befa0f9a772b3269fd6ece19f003a5c2578a6f
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Merges the four main pipe public APIs into a single file,
similar to what is done for other microkernel object subsystems.
Change-Id: Ib3dab0a9330700d77c9fd6f88500590c0004d7b6
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
There is no need to initialize fields to zero that are already
nulled out by the build system.
Change-Id: Ib37e77aaadb1beee800ad74dcfba7caff932015e
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
These structures are only used by the microkernel itself, so they
now reside with other non-public microkernel structures.
Change-Id: I4bbba22e46c5336b7b3c41dcdc76e0d9de4e7e2b
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
There's no need to expose option combinations that are only used
internally by the microkernel itself.
Change-Id: I4e2725b060ce5edefdd1918c00fbd915cd67d8dc
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
1) Now invokes pipe routines directly, without the use of function
pointers.
2) Eliminates unreferenced _DEVICE_CHANNEL symbol.
Change-Id: I6e26476265ed8f33febb5a06c9d03daf7147ee5e
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Routines are no longer flagged as constructors using the FUNC_CONSTRUCT(level)
macro. This is because some compilers do not support constructor levels.
To indicate that a routine should be a constructor, the SYS_PREKERNEL_INIT()
macro should be used AFTER the definition of the routine. For example ...
void my_library_init(void)
{
...
}
SYS_PREKERNEL_INIT(my_library_init, 500);
The first parameter to SYS_PREKERNEL_INIT() is the name of the routine. The
second is the priority level (000...999). The lower the number, the higher
the priority. NOTE: It is important that all three digits are specified;
otherwise the linker may put the constructors in an undesired order.
Change-Id: Ic334875c60a453b39c10a2ffdee856b4851cb16c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Keys off variations of "ICC" to remove references to the Intel C Compiler as
it is not supported.
Change-Id: I09f67880b39839982ed1c450e564c274440628a5
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Renames the include file defining non-public microkernel structures
from k_struct.h to kernel_structures.h, and relocates it to the
microkernel's non-public include file directory. This means that
applications and drivers including the microkernel's public APIs,
using microkernel.h, can no longer access non-public information.
Note: This change also eliminates some redundant #includes by the
microkernel's own subsystems, since the inclusion of minik.h brings
in the vast majority of public and non-public APIs.
Change-Id: Ic7d9ec1ebb8a124ccd0aaad98b50e16c197ffa00
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Revises several trivial task APIs to avoid exposure of task object
internal fields.
Change-Id: Iefa8028042dff1abd1f447eb1cc1ee49f0c2eda5
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Hard-codes the size of the command packet structure so that the
public microkernel semaphore API can utilize command packet sets
without utilizing non-public microkernel API information.
Also adds code to generate a build error if the hard-coded size
is too small, just in case the size of the command packet changes.
(Can't check for size equality, since the structure size may vary
from one compiler to the next. If the value is too large any extra
space in the command packet set will simply go unused.)
Change-Id: I69e7c2f08e3fe75d74bd712459d5587e22443c04
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Removes non-public type definition used to implement the microkernel's
task IRQ support from the public API.
Change-Id: I42c22f0fa323c5b9abbc7d3d29a89a9b2b903a36
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
1) Eliminates declaration of variables that are already being
included by a microkernel subsystem include file.
2) Eliminates duplicate declaration of timer_driver().
3) Moves definition of well-known events to the event-specific
include file.
4) Moves declaration of a task-related routine to the task-specific
include file.
5) Moves declarations that are only needed by kernel_main.c
to kernel_main.h.
Change-Id: I6f387915a5ce208879482522586b977118f657e7
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The variable task_irq_object is global because the test_task_irq project
needed to access it. That data should only be accessed through the API.
To make the variable local, break that dependency to the test project
and restrict the access to the variable.
Change-Id: I1ccb21625d456714a038e0374d124b42aa72e577
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Fixing the folling whitespace issues:
- SPACE_BEFORE_TAB : We should not use white spaces before tabs to alignment.
- TRAILING_WHITESPACE : Lines should not end with a white space.
- QUOTED_WHITESPACE_BEFORE_NEWLINE : Removing unnecessary whitespace before a quoted newline.
Change-Id: I024e8d39164c5e5e9d8370f3499d21b49147feee
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
The 'else' statement should be in the same line that the
close brace of the 'if' statement. E.g.:
if (condition) {
do_this();
do_that();
} else {
otherwise();
}
This commit fixed this kind of error using the following script:
#!/bin/bash
for file in $(find ./ -name "*.[ch]" ! -path "./scripts/*" ! -path "./host/src/wrsconfig/*");
do
if [ ! -h $file ];
then
sed -i '/^[ \t]*}$/ {
:review_next_one_too
N
s/^\(.*\)\n[ \t]*else/\1 else/
/}$/ b review_next_one_too
}' $file;
fi;
done
Change-Id: I7e811a572d735fa08e84850055ebbde29eb10e8d
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
There should be a whitespace between the 'if', 'for' and 'while' statements
and the open brace. this commit fix this kind of error.
Change-Id: I4bae17d98f8ec8b698d40253a9a4c873111a8904
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Line's length should be shorten than 100 characters. This commit
fixes these lines separating them into two parts.
Change-Id: Ic68c9086866cd778187aa1465470acc0485e2271
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Some checkpatch issues were solved by scripts leaving other problems
such as alignment and indentation issues. In order to comply with the
defined coding style the following fixes were made:
- Fixed the function declaration moving the parameters' comments above
the function in accordance to the doxygen format.
- Fixed functions' opening and closing brackets. These brackets should
not be indented.
- Fixed the 'if', 'for' and 'while' statements adding the brackets
around the sentence.
- Fixed comments' alignment.
- Fixed indentation.
The work was done manually and submitted as one commit. I didn't
separate these changes in different commits because they were fixed all
at once. Basically, all errors were fixed in every file at once.
Change-Id: Icc94a10bfd2cff82007ce60df23b2ccd4c30268d
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
The gain is two-fold:
- Removes the need of preprocessor conditionals in the timer drivers'
ISRs.
- Allows removing the duplication of the 'tick announce' code across
all timer drivers.
Change-Id: I6078a0b00a833c1d1ca76474987c3214a0c05f7b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
These APIs no longer serve a useful purpose; there removal helps
reduce microkernel-related "pollution" of nanokernel files.
Change-Id: I3fb1df1feb47abf1b3e57656175ba6c80e191932
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Makes various nanokernel file names more accurately reflect their
actual roles, and improves consistency with other naming conventions.
Change-Id: Ibea5a66a8d66c4e41810d6b3d70b4c459a3848a8
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
There is no need to have code to set fields of _nanokernel to zero,
since the variable is zeroed out during BSS initialization.
Change-Id: I338369511d8b0bcc2fb2b6104acdd281dac9a926
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
1) Revises name of background/idle task stack area to make it
more meaningful.
2) Converts a routine to be non-global since it isn't used elsewhere,
and renames it to remove an unneeded leading underscore.
3) Updates and enhances comments to better reflect the current
operation of nanokernel initialization.
Change-Id: Ibff7703562d1a9585dc2022741a6f0acb90c0a78
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
No longer passes arguments to _nano_init() that aren't needed.
Note: Also eliminates duplicate declarations of _nano_init()
that are obsolete.
Change-Id: I36ddfc9ceb18e3e5d6942a23574e38c1dfd3eb65
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Moves all nanokernel initialization code into a single file, since
they are all conceptually related.
Change-Id: Icd4e8572756fdcef7d0b965224ae00824e748a0a
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Moves all general purpose context manipulation routines into a
single nanokernel file, since they are all conceptually related.
(This also eliminates the anomaly of having APIs that could be
used with a task in a fiber-specific file.)
Change-Id: Idb862175e8795962dd78d31b66151f7b14936df0
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Ensures that the microkernel's command stack has at least one element
at project configuration time, rather than at project build time.
Change-Id: I74f10bcb0d0275854801b50d5160fc85fb911250
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The revised option name more accurately describes its purpose, and
avoids potential confusion with the microkernel's tickless idle
capability. Also, inverting the "polarity" of the option means that
conditional code that references it does not have to use negative
logic, which make the code easier to comprehend.
Change-Id: I0c6f82f077a87a28544048d214efa7020939e566
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Relocates and renames the include file which declares non-public
APIs needed by sysgen from the directory containing the microkernel's
public API to the directory containing its non-public API.
Note: Need to come up with a more elegant way for generated
kernel_main.c to access kernel_main.h, since the current relative
path approach is kludgy.
Change-Id: I5e4b07038e566f1f161001d676a3b0faa487a480
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Hides the existence of these routines from the microkernel's main
public API include file, but allows both sysgen and the microkernel
itself to continue accessing them.
Change-Id: Iaf1beff81d045e9df29eb07517793e4b4410f51e
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Hides the existence of these routines from everyone but the
microkernel's initialization code.
Change-Id: I5dc0a1395c7f01f39d8f283e4f48b0c95578902e
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Since the K_TIMER type is a non-public API used within the micro-
kernel itself, it doesn't provide any real type abstraction benefit
that isn't served equally well by the struct k_timer type it is
based on.
Change-Id: I482d7c0459d5734402be541322ff752dd1a3714a
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The encoding of the microkernel object identifier fields is
something that only the microkernel needs to know.
Change-Id: I3701760cdce5768e082b6d2432b75382f5a2f557
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Hides the existence of these APIs from everyone but the
microkernel's timer subsystem itself.
Change-Id: I49482a6e16fee28f1ed3e2244e47df401854c9fc
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Relocates the declarations for most non-public microkernel APIs
into the main include file for such APIs (i.e. minik.h), then
eliminates the per-subsystem include files. (The per-subsystem
files don't serve any significant purpose now that the routines
comprising each microkernel subsystem have been consolidated.
In fact, there wasn't a single file that included one of these
files that didn't already include minik.h!)
Note: The channel APIs have not been consolidated yet, as they
require further cleanup. Also, one mailbox API that is used only
by the mailbox subsystem itself is moved there rather than being
placed in minik.h.
Change-Id: Ic7f1ac8a67bd39b685f70379dffff0d0caf1b290
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Hides the existence of the microkernel's tick count variable
from everyone but the microkernel system clock subsystem itself.
Change-Id: I6bd20c28758a52eeac376617dd8d542c03738c2a
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Hides the existence of the microkernel timer list variables
from everyone but the microkernel itself.
Change-Id: I81b64040efce849328e860067e37731b755a094d
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Hides the existence of the microkernel event list variable from
everyone but the microkernel event subsystem itself.
Change-Id: I5a2ac41ebd8131b85897c60eaae24013f10686f0
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Brings the name of this non-public microkernel variable into line
with those of analogous variables.
Change-Id: I17dc343faf2dc1ace63b5a3e8164ff08ddd60ebd
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Spaces between the function name and the open parenthesis are not allowed.
This commit fixes the case where only one open parenthesis with leading
whitespaces is present in the line.
#!/bin/bash
checkpatch_script="$VXMICRO_BASE/scripts/checkpatch.pl --mailback --no-tree -f --emacs --summary-file --show-types --ignore BRACES,PRINTK_WITHOUT_KERN_LEVEL,SPLIT_STRING --max-line-length=100 "
for file in $(find ./ -name "*.[ch]" ! -path "./scripts/*" ! -path "./host/src/wrsconfig/*");
do
# fixing spaces between function name and open parenthesis
for line in $(eval $checkpatch_script $file | grep "WARNING:SPACING: space prohibited between function name and open parenthesis '('" | cut -d":" -f2)
do
echo "$file : $line"
sed -i ''$line' { /[ \t](.*[ \t](/ b skip_it s/[ \t]*(/(/ ; :skip_it }' $file;
done;
done;
Change-Id: I1e026eaee930e297374e5f2f725b78f29824dee3
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
The open braces of the 'if','for', 'while' and 'do' statements should be at the end on the
same line of the statement to comply with the defined coding style. E.g.:
if (x is true) {
we do y
}
Change accomplished with the following script:
#!/bin/bash
checkpatch_script="$VXMICRO_BASE/scripts/checkpatch.pl --mailback --no-tree -f --emacs --summary-file --show-types --ignore BRACES,PRINTK_WITHOUT_KERN_LEVEL,SPLIT_STRING --max-line-length=100 "
for file in $(find ./ -name "*.[ch]" ! -path "./scripts/*" ! -path "./host/src/wrsconfig/*" ! -path "*/outdir/*");
do
if [ ! -h $file ];
then
# obtaining the line's number where the error is reported in a reversed order
reversed_lines="";
for line in $(eval $checkpatch_script $file | grep "ERROR:OPEN_BRACE" | cut -d":" -f2)
do
reversed_lines="$line $reversed_lines";
done;
# fixing the issues in reverse order due to lines can be deleted affecting futher lines
for line_reported in $(echo $reversed_lines);
do
# search for the line where the open brace is
char_found="";
let line=$line_reported-1;
while [ ${#char_found} -eq 0 ]
do
let line=$line+1;
char_found="$(sed -n ''$line' { /{/ p }' $file)";
done
let statement_line=$line-1;
let brace_line=$line;
# condition to avoid modifying lines that ends with the character "\"
char_found="$(sed -n ''$statement_line' { /\\$/ p }' $file)";
if [ ${#char_found} -eq 0 ];
then
# fix the issue
echo "$file : reported on $line_reported (found on $brace_line -> moved to $statement_line)";
sed -i ''$statement_line' { s/[ \t]*$//; s/\([ \t]*\/\*.*\*\/\)$/ {\1/; /{/ b already_done s/$/ {/; :already_done }; '$brace_line' { s/{[ \t]*//; /^[ \t]*$/ d }; ' $file;
fi
done
fi
done;
Change-Id: I517c40bb33840ef531f2319354350f578b238abb
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Explicitly moved from __ to _ by direction of Ben Walsh
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" -o -name "*.arch" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: Idd6f7c3c2fdd818f0a794985f3689705cac3c0a2
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating local variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" -o -name "*.arch" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: Ie65865c480be5b6a678ef4716dade3ee745bd88f
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" -o -name "*.arch" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: Icf5900c057f3412d3c7725c07176fe125c374958
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
The 'proc' name was a remnant of legacy naming.
Change-Id: I1ee47e47728e4bd927d7fe2284f72ace6b9aebc6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This notation is more concise and carry the same information.
Change-Id: Iba2023d37c2f3168fa44750441a29a6e024c0d7e
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Append '_non_preemptible' to _fifo_put, _lifo_put, _sem_give and
_stack_push.
The original names do not convey the fact that these routines are
usable only by fibers and ISRs because they do not invoke a context
switch if they cause a fiber to become ready.
Change-Id: I8ddc24cbc7ebcbed42479ef84b04a74ef21d1647
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
State that a task 'giving' an object to a waiting fiber will be
preempted immediately. Remove useless _Swap() comments.
Change-Id: I78e9871acc046dc9b003f926d45b0b52ba48d2b4
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The nanokernel LIFOs could only have one fiber pending on one of
them concurrently. If a second fiber wanted to take a contested
LIFO, if would kick the pending fiber out of the wait 'container',
but would not put it in back in the ready queue with an error. Instead,
it would, for all intents and purposes, remove it from the scheduling
mechanism of the nanokernel: the fiber would be 'lost' at that point.
The nanokernel LIFOs now make use of the fiber pend queue, and thus
allow multiple fibers to pend concurrently.
sysgen is updated since the microkernel initializes statically two
LIFOs, one for the command packets and one for the timer packets, and
the LIFO data structure has changed.
The nano_timers use the LIFOs and look at their internals, so they are
updated as well.
Change-Id: I250a610fcdee9d32172c88d38e6c3cfd5b437d15
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The nanokernel semaphores could only have one fiber pending on one of
them concurrently. If a second fiber wanted to take a contested
semaphore, if would kick the pending fiber out of the wait 'container',
but would not put it in back in the ready queue with an error. Instead,
it would, for all intents and purposes, remove it from the scheduling
mechanism of the nanokernel: the fiber would be 'lost' at that point.
The nanokernel semaphores now make use of the fiber pend queue, and thus
allow multiple fibers to pend concurrently.
Change-Id: If8a8cee55d47fa1454ee84c56950fd4da20cd436
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Adapt nano_fifo to use the struct _nano_queue and the _nano_wait_q
interface built on it.
The nano_fifo is the first to be adapted to use these since it currently
is the only nanokernel object that can handle multiple waiters, and the
_nano_wait_q abstraction was taken directly from it. This allows an easy
transition and can reuse the same tests to verify the abstraction is
working correctly.
Change-Id: Ie96e6cf1cb21c99ab2fb9832f9b454a9e1ebd300
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This will allow using it for nanokernel objects wait queue, and thus
having all the code for multiple-waiter nanokernel objects in one
location and reusable by all objects.
Change-Id: Ica27fea3d4bc74342e4c54fc8ea5a3425c293e80
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The 'channel' wording was misleading.
Change-Id: Idbfc2322fd6ba8e26d59255c9b9a6e2274df22a8
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The 'channel' wording was misleading.
Change-Id: I36ccd0944c057fd9f6356c67c2f5f0dc867920a9
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The 'channel' wording was misleading.
Change-Id: Ibcd5dc2fe83cea860475380470647ba23ac88a2a
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The 'channel' wording was misleading.
Change-Id: I0f6f620e728d24988159cb80ee98edcaf7c52ec0
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The microkernel server's stack area can be defined by the kernel
library itself, without relying on sysgen to do it.
Change-Id: I9359946ce9ca9138970db4e264fd25d8b92034c6
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Moves workload monitoring logic from microkernel server file and
relocates it so it resides with other workload monitoring code.
This change means that the various variables use for workload monitor
computations no longer need to be globally visible.
This move also allows correction of two pre-existing issues:
1) Eliminates reference to non-existent POWERSAVEOFF configuration
option.
2) Test to see if idle task has been deselected is no longer done
if prior test has shown that it has just been selected, since
the two conditions are mutually exclusive.
Change-Id: Ibd04b789e9ed40910c33261285c07f5a1044eee7
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
1) Removes leading underscore from non-global API name.
2) Adds missing function comment block.
3) Adds an important caveat regarding the way workload monitor
calculations are done.
Change-Id: I66963f6a7a0d419f97a6a41cee4efb0eaf510585
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Remove workload monitoring logic from system clock tick file and
relocate it so it resides with other workload monitoring code.
Note: There is still some workload monitoring logic in the microkernel
server that needs to be consolidated.
Change-Id: I399a90d6a1ca4792f6f40cbb66ce8c1c6f15ceaf
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Shorten API name by removing extraneous wording.
Change-Id: Iff67c4d7e82b7093e3d4d8a7ce61a3011e0ff517
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Merges content of microkernel's taskcall.c file into cmdPkt.c.
Change-Id: Ifc3642a6f0ff4fb98423a36b1e7d18acfade2991
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
These conditionals are no longer required.
Change-Id: I70db7328cd48db7dceeb4ee982a048c3e07980d1
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Change _nano_ticks to 64-bit with the functions that operate it
for the consistency with microkernel.
Introduce *_tick_delta() functions that return 64-bit value
and *_tick_delta_32() that return low 32 bits.
Change-Id: Id02c9f4b2b5c309ad9aa0a82bb7f4330af7e34a3
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
If a source code file depends on a configuration option,
that, in turn, depends on a compiler, this file has to
include toolchain.h.
toolchain.h includes a compiler specific header file that
sets the proper configuration option.
Change-Id: I7c9002522a8c6d6fd945e27a450ebe46ba9d4892
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
In order for better compiler support make sure that
absolute symbol macros are specific for a supported compiler.
As the patch modifies gen_config_abssym sources, at least,
host/src/gen_config_abssym host tool needs rebuild.
Change-Id: Iece19611e2410a9753e538c725c5c81a447bf978
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Relocates routine that updates active microkernel timers when the
system clock is incremented so that it is co-located with the
rest of the microkernel timer object routines. Also renames the
routine to conform to the revised kernel naming conventions.
Change-Id: I264833fd0aad210057ad8c0cd6a929e1656197db
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Folds this routine into task_tick_get(), since their co-location
into the same file means that there is no need for one to be a
wrapper function for the other. Also enhances the comments describing
the resulting routine.
Change-Id: I23210991b13be8864af0faf7e1fc4f23aa9252c2
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Moves routines that have nothing to do with microkernel timer objects
from the time support file to the file containing system clock support.
Change-Id: I7ab3e579877d689dc9487ca3330fe25e2e4afdd0
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Renames routine to conform with coding conventions and enhances
comments describing routine. Also converts routine to a non-global
routine, since it's only called from one place.
Change-Id: Id2ca15169eeb34248a1adfaecdef0ccd04e313d1
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This file contains content that really belongs in the files that
implement the microkernel's system tick logic and the microkernel's
timer object logic. Once the content is relocated, the file is
empty and can be deleted.
Change-Id: Ia116424d0bf11a759e5d995443121be98a320e29
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Moves the architecture-independent microkernel's handler for
fatal task errors into the file containing other abort-related
routines, since it doesn't have anything to do with the
microkernel server code it previously resided with.
Change-Id: I284eb05339cdff955f02018edfd0e53619b283b4
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
1) Updates comments to better describe the purpose of the file.
2) Corrects an excessively long line.
3) Eliminates an unnecessary #ifdef, which isn't required now that
the file has been moved to the main microkernel source directory.
Change-Id: I765095e6989213d82092aecd8a16b495b3d4b8d4
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Relocates the microkernel server implementation so that it appears
in the intuitive kernel subdirectory, and give it a more meaningful
name.
Change-Id: Id93620b6f5e4797bbbeef9eadf02490e19220d7e
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Does a minor reshuffling of logic to ensure that the idle task
continues to busy wait even if _workload_loop() unexpectedly
returns. Also enhances associated comments to make the operation
of the idle task a bit clearer.
Change-Id: Ie6fd3fde0b088770815b1946415d213ee0e54a4b
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
1) Fixes up comments to improve readability.
2) Corrects lines whose length violates the limit specified by
coding conventions.
3) Removes two extern statements that are no longer needed
due to the recent consolidation of idle-related code.
4) Substitutes the proper symbolic value for two numeric literals.
Change-Id: I7f979ab84b7f888f4015a406a84d8483a105255c
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Consolidates all architecture-independent microkernel code dealing
with advanced power management into the main microkernel idling file,
so that it can be more easily maintained.
Change-Id: I140575508e32fe25d5210b8611ad1ffdf55b7529
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Moves all files in this sub-directory to kernel/nanokernel, then
deletes the sub-directory itself. Both of the relocated files are
associated with fundamental nanokernel capabilities, which makes
their inclusion in the main nanokernel source directory logical.
Change-Id: Ifae46a50c60f67e9226d3a33cd0086b644b291ba
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Moves all files in this sub-directory to kernel/nanokernel, then
deletes the sub-directory itself. Both of the relocated files are
used during nanokernel initialization, which makes their inclusion
in the main nanokernel source directory logical.
Change-Id: I1cac0561317f808eab2de74ece9868c62c70b6d8
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Moves all files in this sub-directory up one level, to the main
microkernel source directory, then deletes the sub-directory itself.
Change-Id: I5b20310828c26038015b159cb6c57906a8258727
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Moves all files in this sub-directory up one level, to the main
microkernel source directory, then deletes the sub-directory itself.
Change-Id: Ic8e158e4e9be9e4ba21a935c371c49beee4ad276
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Moves all files in this sub-directory up one level, to the main
microkernel source directory, then deletes the sub-directory itself.
Change-Id: Ifd56369e5209b06fae39ee69403ea234fb392b4a
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Moves all files in this sub-directory up one level, to the main
nanokernel source directory, then deletes the sub-directory itself.
This change means that all nanokernel source files (with the
excecption of its include files) are now in the main nanokernel
source directory, which is a more intuitive arrangement.
Change-Id: I6bd4b1bb6fdd9be13d57b320947f520a5bc73914
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Relocates start_task() so that it appears in the main microkernel
directory, alongside its complementary routine abort_task();
this corrects a long-standing anomaly in which this microkernel-
specific routine appeared in the nanokernel portion of the tree.
With this move, the start_task.c file and its parent nanokernel/task
sub-directory no longer serve any purpose and are removed. (Note that
no changes are required for ARC architecture support, which does not
support microkernel capabilities and doesn't use this sub-directory.)
Change-Id: I973e1c32c9a8ddcacdc08159069ae7cdfea0f107
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This renaming will impact the following functions:
nano_node_tick_delta
task_node_tick_delta
Change-Id: I5d3fdfe0121674d88b8f3d8777150b2242b88d1a
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
We no longer support the concept of nodes.
This will impact:
task_node_cycle_get_32
isr_node_cycle_get_32
nano_node_cycle_get_32
This change also updates the nanokernel test API to work with the change.
Change-Id: I68de883b07d4775b09fda13e503c040b3f14baa7
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
We no longer support the concept of nodes. This will impact the
following function names:
task_node_tick_get
isr_node_tick-get
Change-Id: I2591193976578689e70b9d6833d5a89a4dc0c4ce
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
We no longer support the concept of nodes. This will impact the following
functions:
task_node_tick_get_32
isr_node_tick_get_32
nano_node_tick_get_32
Change-Id: I27184c76516da16a0c3f335656f9efcee2fb549d
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Eliminates unnecessary "node_" portion, as there is only a single
source for which workload information is collected.
Change-Id: Id7c03e2149d1b7979a6921e99e1db0288da09c0c
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Since the microkernel now supports only a single processor, there
is no longer a need for a means to identify it.
Change-Id: If5b2d8e114d8a3bfdd597bc23d70be5e1fa2238c
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
No longer referenced, and not part of the public API.
Change-Id: I97b7bbfe695fc867f93cb222ad893d112f25f755
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
There are no longer any utilities left in this directory.
Change-Id: I444851efd034453ca59eb211cac2aa6aa3d8c4fe
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Updating micro kernel functions to follow a consistent naming convention.
Part of that process is the removal of camelCase naming conventions for the
preferred_underscore_method. This specific change maps the macro to the
function naming used by the OS.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
echo "Checking C, CPP, H, HPP, and s files..."
find . -type f \( -iname \*.[ch] -o -iname \*.[ch]pp -o -iname \*.s \) \
-not \( -path host/src/genIdt -prune \) \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
echo "Checking KCONF, LST, and PY files..."
find . -type f \( -iname \*.lst -o -iname \*.kconf -o -iname \*.py \) \
-not \( -path host/src/genIdt -prune \) \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Change-Id: If41030c6b9f0417356807b0cc6f4c287378e0c17
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
- Needs the same change as for nanokernel timer code to prevent
a divide by zero error.
- Eliminates a prototype version of task_sleep() that attempted
to delay by busy waiting; this won't work because the kernel
won't have any timer support in place at all!
- Removes some unnecessary #ifdefs.
Change-Id: I0debf7aed4e4075f5821a77014c3a1d65fefe923
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Only required a minor tweak to avoid a divide by zero error.
Change-Id: Id2cc680ba621f0a3df9660606e9bbfa81c6fbe46
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Revises microkernel memory pool code so that it properly handles the
case where the kernel does not have timer support.
Change-Id: I38fc3916681bbd3ac678399724ddb679a16f6ead
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Revises microkernel memory map object code so that it properly
handles the case where the kernel does not have timer support.
Change-Id: I2dfb0663c91370ffbaed94d1d6aea909f64398db
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Revises microkernel mailbox code so that it properly handles the
case where the kernel does not have timer support.
Change-Id: Ibd3ff657e0cad1320d037d7c1e3e3c673c56c9e9
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Revises microkernel FIFO code so that is properly handles the
case where the kernel does not have timer support.
Change-Id: If069cafbcf695c48c2d788ea2a6b6e04a9f0c878
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Revises microkernel semaphore (and semaphore group) code so that
it properly handles the case where the kernel does not have timer
support.
Note: Semaphore code has some commands and routines whose names
imply that they are used only in cases where a timeout occurs,
even though they can be used in non-timeout scenarios too!
Change-Id: I6747032dd215f9b98e9d7d971e4b3ff32fbd7e55
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Revises microkernel mutex code so that it properly handles the
case where the kernel does not have timer support.
Change-Id: I987780521e137b95b9544013793937cdf45abafb
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Revises microkernel task IRQ code so that it properly handles the
case where the kernel does not have timer support.
Change-Id: Idc9bd120151e5c18798e1ed98af30dabe245fe64
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Revises microkernel event code so that it properly handles the
case where the kernel does not have timer support.
Change-Id: I72b0cef0e6a8cd19206857ec6c7564edf94edb72
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Updating the micro kernel structures and variable names to create a
more meaningful context by their name.
Change-Id: Ib3ae2cd9055f0690d454a0f52488721541c0fb62
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Updating the micro kernel structures and variable names to create a
more meaningful context by their name.
Change-Id: Ie7b14787d36d99ed131db6ac3d4fbb652dc39b57
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Converts all remaining references to the obsolete LITE symbol by
changing them to CONFIG_TICKLESS_KERNEL.
Note that the tickless kernel capability remains experimental,
as more work is required to properly support it.
Change-Id: Ie0d2514d00c3fd86297f38499e79f4d9c9edc15c
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Most kernel code that depends on the state of the LITE symbol
has this dependency removed, since the symbol was used for an
incomplete feature that could not be enabled. This change has
no operational impact, as the LITE symbol was never defined
by the build system.
In a handful of timer-related references to LITE are not removed,
as they will be useful in adding a tickless kernel capability.
Change-Id: I4ae37f484e3ab08093b732d45aca87d2e8678adf
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Allows the number of task priority levels supported by the micro-
kernel to be configured, rather than fixing this value at 64.
Setting NUM_TASK_PRIORITIES to N provides support for task
priorities 0 (highest priority) through N-1 (lowest priority).
The lowest priority is reserved for the kernel's idle task.
This enhancement allows system designers to significantly reduce
the size of the microkernel's task priority queues by eliminating
unneeded queues. In systems requiring only a few task priorities
over 500 bytes can be saved.
Change-Id: I497aac608a3d548fb1b024068c08a5f494c3d524
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Updating micro kernel functions to follow a consistent naming convention.
Part of that process is the removal of camelCase naming conventions for the
preferred_underscore_method.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find . -type f \( -iname \*.c -o -iname \*.h -o -iname \*.s -o -iname \*.kconf \) \
-not \( -path host/src/genIdt -prune \) \ \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Change-Id: I6b3d61c9ae7b024bb82356678cc2fc1d433dd3bc
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Updating micro kernel functions to follow a consistent naming convention.
Part of that process is the removal of camelCase naming conventions for the
preferred_underscore_method.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find . -type f \( -iname \*.c -o -iname \*.h -o -iname \*.s -o -iname \*.kconf \) \
-not \( -path host/src/genIdt -prune \) \ \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Change-Id: I1a4bdbb5d7248896830ea25d2126b1bb9b918878
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Updating micro kernel functions to follow a consistent naming convention.
Part of that process is the removal of camelCase naming conventions for the
preferred_underscore_method.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find . -type f \( -iname \*.c -o -iname \*.h -o -iname \*.s -o -iname \*.kconf \) \
-not \( -path host/src/genIdt -prune \) \ \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Change-Id: I3ed882edff2cae66cb1c22fe40cc32994d01dbb3
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Updating micro kernel functions to follow a consistent naming convention.
Part of that process is the removal of camelCase naming conventions for the
preferred_underscore_method.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find . -type f \( -iname \*.c -o -iname \*.h -o -iname \*.s -o -iname \*.kconf \) \
-not \( -path host/src/genIdt -prune \) \ \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Change-Id: I905f8144411ad3832cf40a76b13f459e488c542c
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Updating micro kernel functions to follow a consistent naming convention.
Part of that process is the removal of camelCase naming conventions for the
preferred_underscore_method.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find . -type f \( -iname \*.c -o -iname \*.h -o -iname \*.s -o -iname \*.kconf \) \
-not \( -path host/src/genIdt -prune \) \ \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Change-Id: Id6215f2aaab918ce13e99909c21f67647cf7229e
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Updating micro kernel functions to follow a consistent naming convention.
Part of that process is the removal of camelCase naming conventions for the
preferred_underscore_method.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find . -type f \( -iname \*.c -o -iname \*.h -o -iname \*.s -o -iname \*.kconf \) \
-not \( -path host/src/genIdt -prune \) \ \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Change-Id: I9f3fc202c580d158a18737ff0f16a25952902ae4
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Updating micro kernel functions to follow a consistent naming convention.
Part of that process is the removal of camelCase naming conventions for the
preferred_underscore_method.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find . -type f \( -iname \*.c -o -iname \*.h -o -iname \*.s -o -iname \*.kconf \) \
-not \( -path host/src/genIdt -prune \) \ \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Change-Id: I0eb8925e53f00b7993374fd8ed3e6ac950dfc1ef
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Updating micro kernel functions to follow a consistent naming convention.
Part of that process is the removal of camelCase naming conventions for the
preferred_underscore_method.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find . -type f \( -iname \*.c -o -iname \*.h -o -iname \*.s -o -iname \*.kconf \) \
-not \( -path host/src/genIdt -prune \) \ \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Change-Id: I6e0edb61dcac091f87c9ffc8fd8bf507ba075367
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Updating micro kernel functions to follow a consistent naming convention.
Part of that process is the removal of camelCase naming conventions for the
preferred_underscore_method.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find . -type f \( -iname \*.c -o -iname \*.h -o -iname \*.s -o -iname \*.kconf \) \
-not \( -path host/src/genIdt -prune \) \ \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Change-Id: I5f879ff27f8b7d02ab148cb05dd1916a831a51a8
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Updating micro kernel functions to follow a consistent naming
convention. Part of that process is the removal of camelCase
naming conventions for the preferred_underscore_method.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find . -type f \( -iname \*.c -o -iname \*.h -o -iname \*.s -o -iname \*.kconf \) \
-not \( -path host/src/genIdt -prune \) \ \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Change-Id: I79b03884f154507aa22c42c3c89136c202c2c9e0
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Updating micro kernel functions to follow a consistent naming
convention. Part of that process is the removal of camelCase
naming conventions for the preferred_underscore_method.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find . -type f \( -iname \*.c -o -iname \*.h -o -iname \*.s -o -iname \*.kconf \) \
-not \( -path host/src/genIdt -prune \) \ \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Change-Id: If7f5e78d6dd5492dbbbcc080c2e822f33eb1c967
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Updating micro kernel functions to follow a consistent naming
convention. Part of that process is the removal of camelCase
naming conventions for the preferred_underscore_method.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find . -type f \( -iname \*.c -o -iname \*.h -o -iname \*.s -o -iname \*.kconf \) \
-not \( -path host/src/genIdt -prune \) \ \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Change-Id: I3de0a16879f142ef20830dfc429c989f10c2cd92
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Updating micro kernel functions to follow a consistent naming
convention. Part of that process is the removal of camelCase
naming conventions for the preferred_underscore_method.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find . -type f \( -iname \*.c -o -iname \*.h -o -iname \*.s -o -iname \*.kconf \) \
-not \( -path host/src/genIdt -prune \) \ \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Change-Id: I628e057f54eb72901c3753b6b8b4849c4cd046c0
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Updating micro kernel functions to follow a consistent naming
convention. Part of that process is the removal of camelCase
naming conventions for the preferred_underscore_method.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find . -type f \( -iname \*.c -o -iname \*.h -o -iname \*.s -o -iname \*.kconf \) \
-not \( -path host/src/genIdt -prune \) \ \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Change-Id: I02122837d74c9d7c5c406e644feda6923b5161f2
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
K_DataFree is only relevant to multi-node systems.
Change-Id: I1892ae94df6d964aca66ba9b06655f7b3e47c812
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The LinkIn[] and LinkOut[] arrays are not used.
Change-Id: I8c2909a587160f0715aa3a82a41d78b86d4ea56c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Gets rid of code that creates absolute symbols for data structures
that are no longer referenced by external tools, as well as the
macro that was used to generate them.
The code that creates absolute symbols for context monitoring-related
symbols is retained, but is now directly tied to the CONTEXT_MONITORING
configuration option upon which those symbols depend.
Change-Id: I6b2ce46d9ab9592a478f591cb074c4c163e9ba0f
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Modifies the name of this field to make its purpose clearer,
and to align with coding conventions.
Change-Id: I8de78df1a0459122067d650130e01078afb5af8a
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Revises this option to make its purpose clearer, and to align it
with other experimantal monitoring-type configuration options.
Change-Id: I593bb7560b5a0544eb05affaa07b59dd78ea907e
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
To introduce the Bluetooth stack to the tree we need some additions to
the configuration options, as well as the very basic header files. The
patch also adds a skeleton for a bt_init() function that applications
will need to call to initialize Bluetooth functionality.
Change-Id: Ideb24dfea584b71f514e05eb47654b659776133e
Co-authored-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: Id55e2394076ed44694e3f761f8a0e6e7bf0b59f9
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: Ia4fdc22a19ae6d338b78055c20b6581971a715d0
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I18b2fb3250db6a7a6717b8329702e2b76a7492f9
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I5a889519aa0b00436731d4d4eccf91b810b424a3
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I3e2dec591ac41a01b61bb1822cc22f17c0cbc1f9
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I6ac0943b06e645598712c56565904f4943cc12bd
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I44e74e2edd4b76797aa5ac7d4f0f528ce1a3bfae
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I3597e8ec742b6317cc3f3513a283326a32b789eb
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I56ee3d3ab6d1254359adcffa4d86c1bf2e20537a
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I4e5c9419fe0ccbc4b2990b96fc95c697decc18e0
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: Iefa600d4b2c981a7146fc34c0fb5e491690a694c
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I5538ce1bb13da14b0d4778264f9d36bf246c497a
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I18710011b215ddb5040f8d073d7e4fb13783af94
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I4b7f7806fcfcbeed1abbc2421c3fc470af87eb7d
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: Ide44a5957321a1dd2971a341da2d35dfb1e0d0ac
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I26bc34923ca3a5f9557138f062e0ed2346737ec2
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I1b470b85c8fca2c8381cb49c29cbd1f0a4708b54
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: Ifed3a15c4f79af72355dcc1beba90973f7bc0959
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I826a0a1ac6ab1db54905d7500ef82202bce6bbde
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I043f24f75c4f9bb6aa6358b1015519260d326d25
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I20dca589df9253fb950aafa060eec1463f696f82
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I99e5b8a15f6bee1cc7efb7a339c2e15076da90d3
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I0edd17bc4019ff3924ac4bca00baac4faf4d7d3f
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: Ic1d437b33789369515aa7f29401be8d365eac279
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I31baa614d4951cfcc6a56661cad6132514fb17a7
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I6d54bd5e39c74c7c627c61878239bbe79e08de59
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I73fea5925bd580fb00d1873240db1591b1e80a8d
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: Idcd3b4dfd86b6e835638623fa7b39401cabdee06
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: Ia591e26dc082302ea4333deeb132d1732700e63e
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I0a807704a81b1faf4b79fe3832830c4994795fe3
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I175a8bcd29e21d64de735fba9a2e2ee2bc57993e
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I5e249e34ee9666666e31db6b9f71fe2abcc22400
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: Ie9ee644501bf608c4881969f376b586077f3b7c9
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I5e774c9b78ace93049a41824cee0305ceb69228d
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I8ad0774ad26836e193ed94165491e0bb1e6e9a0c
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: Iff92324e4442883cde8d7e1b6831d091c77584ce
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: Ic81b4ad7edf476da61ae62df627866e0446714d7
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I10a1bff593c56cf6703920b9feccd10e32cc65ef
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I413e59e0200c2b8eba1bee79e444b3492de8fb7c
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: Ifdfb9042ff4e83f6d7a8430d47c573b85eca9048
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I77d459388aa26eaa52d0f59234d761f3ca7d1496
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: If9b4747ffa6f9dae4cb77717931fed445ae43721
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I8996c427a98f542052b40bcc9f623c05f6d9bb21
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I2045fab9f67fda6f0d26a53d47561a705046d4db
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I719d6f1a89b343d149eded7227534ee30055e030
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: Ibe83bc837cdae54cf553b80efd989ad321447873
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I12ab3ee4111a32afc674b654bf0a914012ec0318
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: Iafa862861cc6b56212c036acc0bb182e2c620e7b
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I3d7f9dfe1874d189fa613088efd8c056b974e01b
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I2e501394b7fa4264d9854659e2dd008e5c94b540
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: Iebefec0e02cbb838564dd71fd4424c1adbff31f5
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I1b3cb984fa75cd1a83649c81787a40aee97f8a32
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I4c27dd98967dedbb15e28618f5dd8f26b919579d
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: Idff77a32adb875789a57d2c9131b87769bf6f174
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: Ied3e173313f9c3a65ee5559a19bfa047f1d71863
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I90299ee1def6e5c1158cb19faec0a711afebbc7d
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I926fa5b9246d79478f4ee7e255b36fe2fe44ec93
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I29d8c0a127b252eb3d2ca62f36cd19a09fa1a1d8
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I36709c9833279f05a186a5c00b996d242c843d4c
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: Ia8a93e07c88bbc559e7bbf0f14815e5e76110fb6
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I92fa9cf5923eec38e4d0437c3cbeeeea4fdca931
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: If0b4e6e045e4564bb4e56ba598b77def556f06bb
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I060310348bffc97b1fef0ed6a8b2d7c975b70f0a
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I95b2198b75ea30e3a6911623b304e4559befab77
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I84449466d14457b4d83657280124554bdca63054
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: Iad6d39bea0da42633e40e7e7d5b64d2a05efbad0
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: Ifb54b2dbdc726e87b10c33776c0d1815d56776cd
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
The symbol K_PrioCount is not used.
Change-Id: I21e4b929dd0bed097ff4453c4a1a02faab7d0019
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The mailbox count K_MbxCount is not used.
Change-Id: I9f1f7907ca5b966c3ff3bedff7a3318523d3a89f
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The system node count K_NodeCount is both not used and irrelevant to a
single-node system.
Change-Id: If5b2b05d25c0ec2678962ae7ddc2b2dd292ac655
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The mutex count K_MutexCount is not used.
Change-Id: I7a51f2cbff1fc2b2bb628dfce22971d62d8d8821
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The semaphore count K_SemCount is not used.
Change-Id: Ia23d721d9790c34258c366b8b6ead135cd6eb289
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The fifo queue count K_QueCount is not used.
Change-Id: Id7b3cba2d1f58c070e895a1fd5de8e911e15a037
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The symbol K_TimerBlockPtr is not used.
Change-Id: I8421f1a690bf5a05970264696d8e0f8c347867f4
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The symbol K_ArgsBlockPtr is not used.
Change-Id: I0098e5a52324d116f0433b6e1fa6498b2f0520c3
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The symbol K_DataBlockPtr is not relevant to a single node system.
Change-Id: I3c63b11063b7dcf4d3c7bfa155fdcf0e1ae35fc8
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The symbol K_TimerNall is not used anywhere.
Change-Id: I4289bf16699bcbf8733dec2ca40d9aa7003d1b42
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The symbol K_ArgsNall is not used anywhere.
Change-Id: I5b5661ab26986960130ef51fd63936fa5c7dfb6c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The symbol K_DataNall is not relevant to a single node system.
Change-Id: I3203a9c72b6e5bb8f2719c4161fe753a3040c8d3
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The symbol K_DataSize is not relevant to a single node system.
Change-Id: Ie57e0610520c5d43d3b8fa90f2a2685fc95ac668
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The host server channels are not used; their function pointers are always NULL.
Change-Id: I7616499f5695b83a015e6ee18c004aba96838d63
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The ENABLE_DEVICE_CHANNEL macro is never defined. Furthermore, there are no
records about what it is supposed to do even if it is defined.
Change-Id: I6b9df005daebcd5af2ca4b3a9f98af8754d41488
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Removes a number of pipe related function declarations out of the publicly
available header file "microkernel/k_chstr.h". The removed function
declarations were already declared in the private header file "ch_buff.h".
Change-Id: I389b0b898cddfb9320831b94d85054e4cf9458dc
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Using angle brackets <> for include files instead of "" improves coding
consistency.
Change-Id: I5edb71be8f834b5090e71b16c7b542429db89711
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The files k_boot.h and flashboot.c are obsolete.
Change-Id: Ieab69e714462079c2a836dacb7c5bab53d2e3b2b
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The TIME_TYPE bits are only unsed internally.
Change-Id: I5afb64a7492ee6defe79f4a570ab1ea119501b55
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The REQ_TYPE bits are only used internally.
Change-Id: I80df7c8a6498ab5624f234df190ffe61267076fd
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The 'DataNode' field in the k_chproc structure is not used.
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Change-Id: If87a667953811772c918c12e1c03f8a5c6f7fafd
The 'srcnode' field in the moved_req structure is only relevant to multi-node
systems. Furthermore, with the absence of the 'srcnode' field, the routine
setup_movedata() requires one less parameter.
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Change-Id: I00bbee2d78ef345a00399708215bd9e1ef5298d2
Since multi-node systems are not supported, the 'Srce' field now only serves
one purpose--to indicate whether the packet was allocated from the command
packet pool. As such, a better name (and type) for it is 'alloc' (of type
'bool') since 'Srce' (of type 'knode_t') suggest multi-node support.
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Change-Id: I47a935af13fd55dbca23c879841d68caf895eae4
The 'destnode' field in the moved_req structure is only relevant to multi-
node systems. Furthermore, with the absence of the 'destnode' field,
the routine setup_movedata() requires one less parameter.
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Change-Id: Ib5deb1369730ccd42ba25d8352d2365d404f9ed3
Concepts such as local objects suggest the existence of remote objects,
which implies a multi-node system. Multi-node systems are not supported.
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Change-Id: I0e6b1c34c35a0f68ad1ccfbf7d9c677ef8b8ae64
Fixes the level of indentation in the routine copypacket().
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Change-Id: Id788a3a8ef211c9b75c67bd511fad4e624f58e5a
Reorders routines in movedata.c to eliminate the forward declarations.
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Change-Id: I74bff9025f221d94688b51cef4cb7499ce61dd39
The concept of 'local' and 'remote' pools only applies to multi-node systems.
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Change-Id: I747d28c845174ca36c9788b7412f6fe5cc71f3f7
The routine _task_mem_pool_move() is only relevant to a multi-node system.
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Change-Id: I191e43f24aa56159a4c4669ff135beceade56284
Move time calculation macros from application directory to kernel
directory, since it is used by a kernel component.
In order to follow namespace and naming conventions, convert
macros to SYS_CLOCK_HW_CYCLES_TO_NS* form.
Change-Id: I96e9149c399adc363aed5095ae82a1abc78d2977
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
When the exact scheduling context is not known it's convenient not to
have to spell out the context in the name of the *_fiber_start()
function. All of the fiber starting APIs map to the same _FiberStart()
implementation, so all we have to do is to declare another alias for
it.
Change-Id: Ic6862383422f89ad7dc4f401e76d610826163bb9
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When the exact scheduling context is not known it's convenient to have
a wrapper API that uses context_type_get() to call the right function
at runtime.
Change-Id: I02b2ac9039519468f5501571243426a6a57ffc4d
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When the exact scheduling context is not known it's convenient to have
a wrapper API that uses context_type_get() to call the right function
at runtime.
Change-Id: Ie72a4b78d53f664575c1d9dfeace52b53d018850
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The helper function _nano_start() is no longer required (due to the
recent relocation of boot banner and kernel build timestamp code),
so the kernel's initialization code calls _nano_fiber_swap() directly.
Change-Id: I06b9f473715afbfbdd4105b0def3445f1b2e3583
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Moves boot banner and kernel build timestamp code to the kernel's
main initialization routine, since it doesn't really belong in a
generic fiber-processing file.
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The K_memcpyrpl() routine is not applicable to a single node system.
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Change-Id: Ia778a6fc43e390a6c0478d641c206d2423a93c27
The K_memcpyreq() routine is not applicable to a single node system.
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Change-Id: I6cdc056f4575099a8838f0bcf32e87479295452d
The K_remreply() routine is not applicable to a single node system.
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Change-Id: I0e99a9db077d5625c981ed219461efa7c955072e
The header file k_boot.h does not need everything that "k_types.h" drags in.
It only needs "stdint.h" for the uint32_t type. This has an immediate impact
on "flashboot.c" as it was improperly relying upon the extra items that
"k_boot.h" dragged in.
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Change-Id: Ib8bfbec52a1198846295d549091dc30bf041d97a
The file netload.c is for multi-node systems only.
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Change-Id: I612ccb5552d7781f9a06e1b4db3dce97cf99f91a
"NODEx.c" is no longer used. The correct file is "kernel_main.c".
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Change-Id: I62523b9181a446097ef3bd278553e097183ed307
Rename local variables to provide more clarity and improve readability:
- X -> task_ptr
- f_old -> old_state_bits
- f_new -> new_state_bits
- H -> task_queue
- Y -> cur_task
Add comments to clarify what this function actually does without needing
to open two additional files (include/microkernel/k_struct.h and
kernel/microkernel/core/global.c).
This function is called when a task needs to be marked as not runnable.
A task can be not runnable for a variety of reasons, which are tracked
in a bitmask defined in kernel/microkernel/include/minik.h.
Tasks that are runnable are stored in a global array, K_PrioList, that
contains a list for each task priority level. Tasks that have
transitioned to not being runnable will be removed from their priority
list by this function.
Change-Id: I07a1180e75e30cdef472c5f77638fc5971ddbaeb
Signed-off-by: Sarah Sharp <sarah.a.sharp@intel.com>
The file NODEx.c is obsolete; it has been replaced with kernel_main.c.
Even if it the comment contents were fixed, it would offer no value.
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
There is no point to having a comment reference the old hard-coded
maximum number of events. The maximum number of events is by
definition 'K_max_eventnr'.
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Instances of the custom OFFSET() macro are replaced with the standard
offsetof() macro from stddef.h to reduce code duplication.
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adding a line after variable declaration in order to comply with
the defined coding style.
Change-Id: Id41af88404bd37227bfd59a2d71ce08d0d6ce005
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
This commit fixes the coding style of the function declarations and aligning
the open and close brackets and change the style of parameter's documentation.
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Change-Id: I648d36eb29dafc7fcd87b8db01e682bea993e5d2
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Updating nano kernel functions to follow a consistent naming convention.
Part of that process is the removal of camelCase naming conventions for the
preferred_underscore_method.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find . -type f \( -iname \*.c -o -iname \*.h -o -iname \*.s -o -iname \*.kconf \) \
-not \( -path host/src/genIdt -prune \) \ \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Updating nano kernel functions to follow a consistent naming convention.
Part of that process is the removal of camelCase naming conventions for the
preferred_underscore_method.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find . -type f \( -iname \*.c -o -iname \*.h -o -iname \*.s -o -iname \*.kconf \) \
-not \( -path host/src/genIdt -prune \) \ \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Updating nano kernel functions to follow a consistent naming convention.
Part of that process is the removal of camelCase naming conventions for the
preferred_underscore_method.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find . -type f \( -iname \*.c -o -iname \*.h -o -iname \*.s -o -iname \*.kconf \) \
-not \( -path host/src/genIdt -prune \) \ \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Updating nano kernel functions to follow a consistent naming convention.
Part of that process is the removal of camelCase naming conventions for the
preferred_underscore_method.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find . -type f \( -iname \*.c -o -iname \*.h -o -iname \*.s -o -iname \*.kconf \) \
-not \( -path host/src/genIdt -prune \) \ \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Updating nano kernel functions to follow a consistent naming convention.
Part of that process is the removal of camelCase naming conventions for the
preferred_underscore_method.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find . -type f \( -iname \*.c -o -iname \*.h -o -iname \*.s -o -iname \*.kconf \) \
-not \( -path host/src/genIdt -prune \) \ \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Updating nano kernel functions to follow a consistent naming convention.
Part of that process is the removal of camelCase naming conventions for the
preferred_underscore_method.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find . -type f \( -iname \*.c -o -iname \*.h -o -iname \*.s -o -iname \*.kconf \) \
-not \( -path host/src/genIdt -prune \) \ \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Updating nano kernel functions to follow a consistent naming convention.
Part of that process is the removal of camelCase naming conventions for the
preferred_underscore_method.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find . -type f \( -iname \*.c -o -iname \*.h -o -iname \*.s -o -iname \*.kconf \) \
-not \( -path host/src/genIdt -prune \) \ \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Updating nano kernel functions to follow a consistent naming convention.
Part of that process is the removal of camelCase naming conventions for the
preferred_underscore_method.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find . -type f \( -iname \*.c -o -iname \*.h -o -iname \*.s -o -iname \*.kconf \) \
-not \( -path host/src/genIdt -prune \) \ \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Updating nano kernel functions to follow a consistent naming convention.
Part of that process is the removal of camelCase naming conventions for the
preferred_underscore_method.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find . -type f \( -iname \*.c -o -iname \*.h -o -iname \*.s -o -iname \*.kconf \) \
-not \( -path host/src/genIdt -prune \) \ \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Updating nano kernel functions to follow a consistent naming convention.
Part of that process is the removal of camelCase naming conventions for the
preferred_underscore_method.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find . -type f \( -iname \*.c -o -iname \*.h -o -iname \*.s -o -iname \*.kconf \) \
-not \( -path host/src/genIdt -prune \) \ \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Updating nano kernel functions to follow a consistent naming convention.
Part of that process is the removal of camelCase naming conventions for the
preferred_underscore_method.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find . -type f \( -iname \*.c -o -iname \*.h -o -iname \*.s -o -iname \*.kconf \) \
-not \( -path host/src/genIdt -prune \) \ \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Updating nano kernel functions to follow a consistent naming convention.
Part of that process is the removal of camelCase naming conventions for the
preferred_underscore_method.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find . -type f \( -iname \*.c -o -iname \*.h -o -iname \*.s -o -iname \*.kconf \) \
-not \( -path host/src/genIdt -prune \) \ \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Updating nano kernel functions to follow a consistent naming convention.
Part of that process is the removal of camelCase naming conventions for the
preferred_underscore_method.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find . -type f \( -iname \*.c -o -iname \*.h -o -iname \*.s -o -iname \*.kconf \) \
-not \( -path host/src/genIdt -prune \) \ \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Updating nano kernel functions to follow a consistent naming convention.
Part of that process is the removal of camelCase naming conventions for the
preferred_underscore_method.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find . -type f \( -iname \*.c -o -iname \*.h -o -iname \*.s -o -iname \*.kconf \) \
-not \( -path host/src/genIdt -prune \) \ \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Updating nano kernel functions to follow a consistent naming convention.
Part of that process is the removal of camelCase naming conventions for the
preferred_underscore_method.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find . -type f \( -iname \*.c -o -iname \*.h -o -iname \*.s -o -iname \*.kconf \) \
-not \( -path host/src/genIdt -prune \) \ \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Updating nano kernel functions to follow a consistent naming convention.
Part of that process is the removal of camelCase naming conventions for the
preferred_underscore_method.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find . -type f \( -iname \*.c -o -iname \*.h -o -iname \*.s -o -iname \*.kconf \) \
-not \( -path host/src/genIdt -prune \) \ \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Updating nano kernel functions to follow a consistent naming convention.
Part of that process is the removal of camelCase naming conventions for the
preferred_underscore_method.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find . -type f \( -iname \*.c -o -iname \*.h -o -iname \*.s -o -iname \*.kconf \) \
-not \( -path host/src/genIdt -prune \) \ \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Updating nano kernel functions to follow a consistent naming convention.
Part of that process is the removal of camelCase naming conventions for the
preferred_underscore_method.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find . -type f \( -iname \*.c -o -iname \*.h -o -iname \*.s -o -iname \*.kconf \) \
-not \( -path host/src/genIdt -prune \) \ \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Updating nano kernel functions to follow a consistent naming convention.
Part of that process is the removal of camelCase naming conventions for the
preferred_underscore_method.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find . -type f \( -iname \*.c -o -iname \*.h -o -iname \*.s -o -iname \*.conf \) \
-not \( -path host/src/genIdt -prune \) \ \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Updating nano kernel functions to follow a consistent naming convention.
Part of that process is the removal of camelCase naming conventions for the
preferred_underscore_method.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find . -type f \( -iname \*.c -o -iname \*.h -o -iname \*.s \) \
-not \( -path host/src/genIdt -prune \) \ \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Updating nano kernel functions to follow a consistent naming convention.
Part of that process is the removal of camelCase naming conventions for the
preferred_underscore_method.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find . -type f \( -iname \*.c -o -iname \*.h -o -iname \*.s \) \
-not \( -path host/src/genIdt -prune \) \ \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Updating nano kernel functions to follow a consistent naming convention.
Part of that process is the removal of camelCase naming conventions for the
preferred_underscore_method.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find . -type f \( -iname \*.c -o -iname \*.h -o -iname \*.s \) \
-not \( -path host/src/genIdt -prune \) \ \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Updating nano kernel functions to follow a consistent naming convention.
Part of that process is the removal of camelCase naming conventions for the
preferred_underscore_method.
Changing with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find . -type f \( -iname \*.c -o -iname \*.h -o -iname \*.s \) \
-not \( -path host/src/genIdt -prune \) \ \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
