The fuel_gauge_get_prop() function prototype declares a function that
retrieves multiple fuel gauge properties at once. The naming suggests it
ought to fetch a singular property at a time. Moreso, some clients may just
want to fetch properties one at a time and may feel uncomfortable using a
prototype for fetching multiple properties when wanting to fetch them one
at a time.
Modify fuel_gauge_get_prop() to fetch a single property and add
fuel_gauge_get_props() to support fetching multiple properties. Modify
existing tests/drivers/samples.
This is part of #61818 work.
Signed-off-by: Aaron Massey <aaronmassey@google.com>
When radio is set to promiscuous mode it is desirable to receive
invalid frames. This skip a few checks and allow an invalid and
non-standard frames be delivered for diagnose.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
The i2c_ll_stm32_v2 driver requires manual timing configuration for
"fast mode plus" speed.
This adds an error message linking to the appropriate documentation.
Signed-off-by: Jonas Otto <jonas@jonasotto.com>
While recent browsers seem to transparently try to use https for
http://www.st.com/... URLs, they are effectively not working anymore, so use
https://www.st.com/... URLs instead.
curl http://www.st.com/en/evaluation-tools/nucleo-g070rb.html -m 5 -v
* Trying 104.89.117.48:80...
* Connected to www.st.com (104.89.117.48) port 80 (#0)
> GET /en/evaluation-tools/nucleo-g070rb.html HTTP/1.1
> Host: www.st.com
> User-Agent: curl/8.1.2
> Accept: */*
>
* Operation timed out after 5002 milliseconds with 0 bytes received
* Closing connection 0
curl: (28) Operation timed out after 5002 milliseconds with 0 bytes
received
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This commit does not introduce any functional change to the
codebase. Just removes certain redundant checks from
various CMakeLists.txt files in order to bring more coherence
in the codebase.
Signed-off-by: Jilay Pandya <jilay.pandya@zeiss.com>
Send a fw ready reply message as soon as possible.
This is usually used on host side which is waiting
for this message in order to establish the
communication with the remote processor - see
imx_dsp_rproc driver from Linux.
This can be enabled by IPM_IMX_FW_READY_REPLY config,
which is by default N.
Set CONFIG_IPM_IMX_FW_READY_REPLY as Y for
openamp_rsc_table sample, running on nxp_adsp_imx8m.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
NOCACHE_MEMORY depends on ARCH_HAS_NOCACHE_MEMORY_SUPPORT, so
don't try to select the symbol if not supported.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Refines the `system_mm.h` to include `zephyr/types.h` instead
of `zephyr/kernel.h` as that is all it needs.
Updated the includes of `mm_drv_ti_rat.c` accordingly.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Based on RM0456, each PLL in the STM32U5 has the
capability to work either in integer or fractional mode.
In this update, the fractional mode can be enabled
by setting the fracn value in the device tree.
Signed-off-by: Jatty Andriean <jandriea@outlook.com>
Split the read function into 2 versions (date and no date) since they
don't have common code.
It improves readability.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
Add support for using the sub second registers. It allows reading and
setting alarm with the sub second tick resolution.
The RTC module is configured to get as high frequency as possible, which
equals the source clock (RTCCLK) divided by 2. To get such frequency,
the asynchronous prescaler is set to 1.
According to RM, setting the asynchronous prescaler to a high value
minimize consumption, so the change increase the power consumption.
Use a config to enable the sub second support.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
RTC drivers uses only seconds, so transition to microseconds is
necessary.
Change way of calculation tick<->time to avoid unnecessary
conversations.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
Synchronize reading two separate registers. In some edge cases the read
registers could point different dates.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
The config values have been hardcoded as magic values. Introduce
universal calculation based on the DTS entries.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
This separates the DT device init macros into two: one for
UART accessed via IO port or MMIO, the other for PCIe UART.
All the conditions needed to setup the device structs are
getting complicated. Hopefully separating them would make
them easier to decode, and to avoid the conditions having
too many levels.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The old CONFIG_UART_NS16550_ACCESS_IOPORT has been used to
indicate whether to access the NS16550 UART via IO port
before device tree is used to describe hardware. Now we have
device tree, and we can specify whether a particular UART
needs to be accessed via IO port using property io-mapped.
Therefore, CONFIG_UART_NS16550_ACCESS_IOPORT is no longer
needed (and thus also CONFIG_UART_NS16550_SIMULT_ACCESS).
Remove these two kconfigs and modify code to use device tree
to figure out how to access the UART hardware.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Instead of PCIE0 and PCIE1, use no suffix for IO port/MMIO IRQ
configuration funct, and suffix PCIE for IRQ config on PCIE
bus.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Use CODE_CODE_1() instead of macro trampolines when
CONFIG_UART_NS16550_PARENT_INIT_LEVEL is enabled.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Using COND_CODE_1() is more intuitive when looking at the code,
instead of some macro trampoline magic.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This simplifies DLF and PCP enabling devicetree macros with
DT_ANY_INST_HAS_PROP_STATUS_OKAY() instead of the complicated
ones.
Also, this moves the macro to initialize struct elements into
the struct initializer itself. This makes it clearer on which
element is being initialized directly inside the struct
initializer instead of having to do mental macro trampoline
to find the correct macro.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Enabled intel LPSS DMA interface using dw common to support
usage of internal DMA in LPSS I2C to transfer and
receive data.
Signed-off-by: Bindu S <bindu.s@intel.com>
Introduce support for Texas Instruments TMAG5170
high-precision linear 3D Hall-effect SPI sensor.
This driver allows to configure measurements on
magnetic and temperature channels. It is also
possible to read rotation of the magnet.
Signed-off-by: Michal Morsisko <morsisko@gmail.com>
Added usage of dma_parent phandle instead of using parent-child
method to get DMA base address.
Signed-off-by: Anisetti Avinash Krishna <anisetti.avinash.krishna@intel.com>
Adds initial support for hm330x dust sensor series. Allows to read PM1,
PM2.5 and PM10 concentrations in atmospheric environment. A further
update to the driver may add support for also reading "standard" CF1
concentrations by exposing of a custom sensor attribute or a Kconfig
option. Tested with Grove - Laser PM2.5 Sensor (HM3301) attached to a
Wio Terminal.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Enable backends by default, instead of requiring some other module to
turn them on. This aligns with the behaviour of sensor drivers and
`BT_RPMSG`.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Be explicit about the HCI backend that Bluetooth unit tests require.
Some unit tests depend on `BT_HAS_HCI_VS`, so also enable that.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
DT_DRV_COMPAT was unused for this driver. To get a node identifier
DT_NODELABEL() macro was used. Refactor to use the correct interfaces
using instance number 0.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The at86rf231 frame buffer access mode read differs from all other
transceivers by only transfer one more byte after PSDU data instead
three. This difference is not evaluated in the current version of
the driver. The current change add the necessary check and read the
missing data (EQ, TRAC).
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Previously, the `uart_console_isr()` routine assumed that the
return value of several uart API functions would only ever
return the equivalent of a boolean value. In fact, an integer
is returned on occasion, and that integer can take on many
values.
Since unary operations would either go to "true" or "false"
and since any non-zero integer evaluates to "true", even a
return value of something like `-ENODEV` would evalueate
to true.
Explicitly compare against the integer-equivalent value of
the expected boolean output.
With this, in the case of errors, negative return values do
not evaluate to "true", and the infinite loop is avoied.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
Currently, the driver imply understand that all instances
will use dma when CONFIG_SPI_MCUX_LPSPI_DMA is set. There
might be an instance doesn't need DMA, so instead of enforce
spi_transceive API to use DMA, add more flexible to enable
DMA only when required
Signed-off-by: Dat Nguyen Duy <dat.nguyenduy@nxp.com>
When the alternate setting is configured as func3, in addition to
the setting of func3-gcr, some pins require external setting.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
Implement the RTIO/Sensors V2/Async API for the AKM09918C. Add a decoder
API implementation as well.
Signed-off-by: Tristan Honscheid <honscheid@google.com>
