Header files of nrfx HALs are not supposed to be included directly
but only with their names prepended with the hal/ directory (so that
an inclusion of an nrfx HAL header clearly differs from an inclusion
of an nrfx driver header).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
A commit that organizes the soc.h header of NXP SoCs:
- removing redundant inclusions of sys/util.h
- removing inclusions of device.h and kernel_includes.h
- including the auto-generated DTS board header
- including the fsl_common.h header
- fixing minor style issues
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We, now, have multiple nRF52x SoCs with 2.4GHz
Radio with LE Coded PHY Capabilities. Therefore,
we would like to have a Kconfig option and select
it in the corresponding SoCs. This allows us to
simplify several #ifdef blocks in the nRF Bluetooth
Controller that would, otherwise, require listing
all nRF SoCS with LE Coded PHY support.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Enable CMSDK GPIO driver on v2m_musca SoC/Board. Add LEDs that are on
the board and init the pinmux for those LEDs to work.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
A 16bits on/off based PWM, found on MEC1501.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add RTC timer driver for CC13X2/CC26X2, and use it instead of systick
as system clock. It is necessary to use this timer for power
management support, so that the system can exit from deep sleep upon
expiry of timeouts.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
No users of this driver after dropping quark platforms.
COUNTER_0_NAME was only defined by the QMSI driver and was defined but
not used in DTS fixup files of ateml_sam0 SoCs. Removing those leftover
defines as well.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
RT SOCs have several memory areas (OCRAMs, DTCM, ITCM, SDRAM, FLASH...)
but only two are selected for FLASH (code) and RAM (data).
It would be good to let the linker be aware about other regions, which
could then be used by drivers or application to create dedicated
sections and relocate memory. For example if we have code in ITCM and
data in DTCM, we still need a dma-able region/section for e.g.
video/camera buffers.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
There are 2 other timers that could be selected, let's just take the
first 32bits one. This should be sufficient to verify the driver.
Enabling the timer in relevant board's dts file as well.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Such basic timer is found on MEC150x for instance.
Since instances have dedicated data, let's define specifice instance
based on unique DT base address definition.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Refactors the kinetis flash configuration field so it can be shared
across all kinetis SoCs. Defaults are overridden for the k8x and ke1xf
series to preserve values used prior to this refactoring.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Kinetis SoCs have a 16-byte flash configuration field that must be
loaded at a specific address in flash. This field is not needed if we
are building an image to be chainloaded by MCUboot or a RAM-only image,
so we can exlude it in these cases and recover some wasted flash.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Convert use of dt_int_val/dt_hex_val to dt_node_reg_{addr,size}. As
we want to remove dt_int_val/dt_hex_val.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert how we get the various chosen properties like "zephyr,console"
to use the new kconfig functions like dt_chosen_to_label.
Because of how kconfig parses things we define a set of variables of the
form DT_CHOSEN_Z_<PROP> since comma's are parsed as field seperators in
macros.
This conversion allows us to remove code in gen_defines.py for the
following chosen properties:
zephyr,console
zephyr,shell-uart
zephyr,bt-uart
zephyr,uart-pipe
zephyr,bt-mon-uart
zephyr,uart-mcumgr
zephyr,bt-c2h-uart
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Configuration item custom busy wait is required for all MEC1501
series if its RTOS timer driver is enabled. We moved the selection
of the timer from board level to MEC1501 SoC level.
Frequency selection remains at the board level.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
Enables the arm v7m mpu on the lpc54114 m4 core. Reuses the mpu
configuration from the i.mx rt, which has the same mpu.
Tested on hardware with tests/kernel/mem_protect
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The driver for STM32's independent watchdog already exists and is
compatible with the stm32wb SoC. Enable the independent watchdog
for the stm32wb series for use with this driver.
Signed-off-by: Robert Weber <robertweber95@gmail.com>
The KE1xF SoC family SIM unit differs from the other Kinetis family
SoCs. Add a unique compatiable and binding for it.
Fixes#18160
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Update the module revision so that the following commits become
effective:
* nrfx_config: Use common mappings of Kconfig options to nrfx macros
* nrfx_config: Unify the way of enabling instances in nrfx drivers
* nrfx_config: Add missing mappings of Kconfig option symbols
* CMakeLists: Add missing inclusions of driver implementation files
The above changes require a minor correction in the nrf91/soc.h file,
so it is also modified in this commit.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This patch adds HAS_SWO selections to all STM32 SoCs supporting Serial
Wire Output via the Trace Port Interface Unit (TPIU).
Signed-off-by: Markus Fuchs <markus.fuchs@de.sauter-bc.com>
This is required to get the watchdog test and sample working since the
required wdt device name macro is generic there.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There are only 178 interrupt lines on CC3220SF. Hence we should not set
NUM_IRQS to a value exceeding that value. We are changing it to 178.
Fixes#18593
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
Consistently place C++ use of extern "C" after all include directives,
within the negative branch of _ASMLANGUAGE if used.
Remove extern "C" support from files that don't declare objects or
functions.
Background from issue #17997:
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Remove extern "C" support from files that don't declare symbols subject
to language linkage effects.
Consistently place C++ use of extern "C" after all include directives,
within the negative branch of _ASMLANGUAGE if used.
Background from issue #17997:
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Move the tail include file outside the extern "C" block.
Background from issue #17997:
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Remove extern "C" support from files that don't declare symbols subject
to language linkage effects.
Background from issue #17997:
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
'timeout' needs to be a signed variable, so that the
check for less-than-zero is able to result to true (if
the timeout actually expires). Addresses the coverity
issue [Coverity CID :203493] reported in #18379.
Fixes#18379.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The HAL/SDK code for imx6sx utilizes floating point support in
CCM_ANALOG_GetPllFreq function which is utilized by drivers to determine
clock information. As such we should enable hardware FP support by
default so we don't get pure soft-float emulation and pull in a bunch of
extra code.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit adds support for the Zynq UltraScale+ MPSoC as a qemu based
platform for Cortex-R based testing. This SoC only supports an
interrupt controller and serial port for limited testing.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
Use address based defines in the dts_fixup.h instead of DT_INST_ based
ones. The DT_INST_ will not get us the consistent mapping that is
needed (as we should assume the order of DT_INST_).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
In nRF9160 the reset pin is a dedicated one, it cannot be configured
as a regular GPIO pin, so this option should not be presented to users
building for this SoC, to not generate confusion.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
In order to increase code coverage, we force building a Secure
Firmware image by default (i.e. with option
CONFIG_TRUSTED_EXECUTION_SECURE set), when building for
mps2_an521 board. CONFIG_TRUSTED_EXECUTION_SECURE enables
compiling-in all TrustZone-related code in the tree, that is,
all ARM-specific code inside #ifdef CONFIG_ARM_SECURE_FIRMWARE.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
