- Adds a flash runner configuration for mimxrt1189,
used for sysbuild multi-image projects.
- Avoid unwanted multiple erases and resets.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
The CM33 has a XCACHE controller to manage the External
cache. Remove unused Kconfigs as we can use Zephyr API's
to manage the CM33 cache,
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
This commit adds MBOX device tree entry for MCXN947.
Adds support for MCXN in NXP ipm and mbox drivers.
Signed-off-by: Tomas Galbicka <tomas.galbicka@nxp.com>
mbedtls is now used in BLE samples, increasing the stack depth needed
of the calling threads. This was causing stack overflows in several BLE
samples.
Increasing the main stack size for common samples, but also the shell
stack size for samples calling bt API from the shell thread like the
bt shell.
Signed-off-by: Axel Le Bourhis <axel.lebourhis@nxp.com>
mbedtls is now used in BLE samples, increasing the stack depth needed
of the calling threads. This was causing stack overflows in several BLE
samples.
Increasing the main stack size for common samples, but also the shell
stack size for samples calling bt API from the shell thread like the
bt shell.
Signed-off-by: Axel Le Bourhis <axel.lebourhis@nxp.com>
M33 early init for GPIO for secure access configuration,
so that driver can operate pins.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Chunlei Xu <chunlei.xu@nxp.com>
add lpspi clock enablement code
DMA3/4 access different domain is controlled by TRDC, release all
the domain access permission for DMA3/4, and add privilege and secure
information in dma access request signal by DAC module
Signed-off-by: Lucien Zhao <lucien.zhao@nxp.com>
This change adds support for segger rtt, similar to other supported
soc's. This was lacking when evaluating tracing.
Without this addition the system fails to build, indicating that
HAS_SEGGER_RTT is missing. Adding CONFIG_HAS_SEGGER_RTT in prj.conf is
not allowed.
Signed-off-by: Bart De Vos <bart.devos@verhaert.com>
Add CONFIG_SECOND_CORE_MCUX_LAUNCHER. This Kconfig is only enabled when
using sysbuild targeting the Cortex-M4 core on the RT11xx series, and
results in loading a minimal application to the Cortex-M7 core that
boots the Cortex-M4 core. This makes developing on the M4 core simpler,
as the user can now simply target the core with sysbuild enabled and
flashing the application will work as expected.
Signed-off-by: Daniel DeGrasse <daniel@degrasse.com>
Although I/DCACHE aren't included under cm33 architecture,
NXP design and integrate Code Cache/Sys Cache for cm33 to
speed up the core execution efficiency.
For the convenience of developers, we believe that software
developers can directly use Code/Sys Cache as arm's I/D Cache.
Signed-off-by: Lucien Zhao <lucien.zhao@nxp.com>
Enable CONFIG_GIC_SAFE_CONFIG by default for Cortex-A Core platforms
as the most targets are to run multiple OSes together with Zephyr on
different Cortex-A Cores.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Add the DWARF v5 sections to the linker scripts of
imx, imxrt, acp_6_0 and xtensa_sample_controller.
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
Now that MbedTLS is capable of automatically enabling
CONFIG_ENTROPY_GENERATOR (when available), we can remove forced
enablements in boards|soc deconfig files.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
This is based on the introduction of a helper Kconfig symbol in
"subsys/random/Kconfig" which is named CSPRNG_AVAILABLE. When this is
enabled it means that there is a "zephyr,entropy" property defined in the
device-tree, therefore Mbed TLS can select ENTROPY_GENERATOR to allow
the platform specific driver to be included into the build.
This commit also changes other locations where CSPRNG_ENABLED was used
moving it to CSPRNG_AVAILABLE in order to solve dependency loop
build failures.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Creation of the new zephyr\soc\nxp\common\nxp_nbu.c driver which manage
the interruption of the NBU. This modification is mandatory to support a
coex application which includes Bluetooth and 802.15.4 on the same
narrow band path.
Signed-off-by: Xavier Razavet <xavier.razavet@nxp.com>
Enable CONFIG_HAS_MCUX_IGPIO because device driver CONFIG_GPIO_MCUX_IGPIO
depends on it, so that the driver can be enabled by dts nodes.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
LinkServer can flash only the first time, cannot flash again.
Fix it by setting default mcu security status as unsecure.
Signed-off-by: Michal Smola <michal.smola@nxp.com>
Rename "nxp,kinetis-lpuart" compatible to "nxp,lpuart" to remove the
device family from its name.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Combine BLE and 802.15.4 monolithic build under a single config to make
it less error prone.
The choice between a BLE/802.15.4 combo firmware and a BLE only firmware
is done depending on the Soc (like RW610 vs RW612).
Signed-off-by: Axel Le Bourhis <axel.lebourhis@nxp.com>
- Adds a flash runner configuration for mcxn/c/a/w
used for sysbuild multi-image projects.
- Solves sysbuild issue with multiple resets and mass erases.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
On NXP RT1170 SOC, ADC ETC exists but it can not be enabled because
of dependency on HAS_MCUX_ADC_ETC.
Also, ADC ETC should only work with ADC together, there is no use
case to run it standalone.
Fixes:#81466
Signed-off-by: Raymond Lei <raymond.lei@nxp.com>
In the IOMUXC controller, the PDRV field uses 0b0 to set the pin drive
to high, and 0b1 to set the pin to normal drive. Fix the pinctrl_soc.h
definitions for the iMXRT11xx parts to use the correct setting for this
register, based on the documentation for the pin control binding
Note that for PDRV type pins, this commit effectively switches their
drive strength setting.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Following the binding rename to "nxp,sysmpu", update the Kconfig
option to align with the binding name and to better reflect the
option's purpose.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Many NXP socs had the following defconfig:
```
config PINCTRL_IMX
default y if HAS_IMX_IOMUXC
depends on PINCTRL
```
However, the PINCTRL_IMX option already has:
```
config PINCTRL_IMX
bool "Pin controller driver for iMX MCUs"
depends on DT_HAS_NXP_IMX_IOMUXC_ENABLED
depends on HAS_MCUX_IOMUXC || HAS_IMX_IOMUXC
default y
help
Enable pin controller driver for NXP iMX series MCUs
```
So the soc level defconfigs are redundant.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
- Disables on reset NMI and EzPort.
- Fixes possible reset and power-on issues.
- Already applied for K64, now applying for the rest of Kinetis.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
- Trace32 runner: no need to configure TE bit in CFG_CORE
register in the cmm start-up script, it can be configured
at Zephyr start-up code when required (via SCTRL register)
- MPU static regions also needs to be updated for XIP and
non-XIP
Signed-off-by: Dat Nguyen Duy <dat.nguyenduy@nxp.com>
Use Zephyr cache API to initialize cache as done for
various platforms. Enabling CACHE_MANAGEMENT by default
Signed-off-by: Dat Nguyen Duy <dat.nguyenduy@nxp.com>
NXP PORT IP instantiations often have different features absent, IE
input buffer, open drain, or slew rate support. Check if the relevant
PCR register bitmasks are defined in the common pin control file, and
define the bitmasks to 0x0 (no effect) if they are not. This allows us
to further consolidate the pinctrl_soc.h headers for SOCs using the PORT
IP.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
add flexspi.c file to get flexspi clock rate.
Enable flexspi1 clock if don't boot from flash.
Use custom fixed mpu_regions.c file to config MPU for CM7
Signed-off-by: Lucien Zhao <lucien.zhao@nxp.com>
