BT support requires lots of PROVIDE calls that cannot
be added into this linker file. All necessary includes
were moved into hal module to proper handled as needed.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Information about which block protect bits are set on power-up is not
inferable from SFDP content, so we need the devicetree config pointer
to get the has-lock property value even when SFDP data is read at
runtime.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Add downlink callbacks on a per-port basis. A single message will be
handled as many times as users have registered matching ports. Callbacks
will also be run on "meta" downlink packets on port 0, such as confirmed
uplink acknowledgements.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Coprocessor sample was lacked of test configuration which makes
buildkite/zephyr to fail. This commit fixes it by providing test
configuration for this sample.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
The device has sent RESET_POWER_UP message before the communication
with the host hadn't been established. It could be observed with
pyspinel which displayed `Framing error`.
This commit fixes the bug by initializing NCP after the host stated
is ready to communicate.
This commit reverts initialization the USB stack into function
otPlatUartEnable to be consistent with others OpenThread platforms.
OpenThread co-processor samples are not affected by #27071 as they use
USB for SPINEL communication with host and not for UART console.
Note:
When co-processor communicates by USB CDC ACM and it is hard reset
(what is happening in current Zephyr OpenThread platform)
the connection needs to be properly handled by the host.
For posix platform used together with RCP it was implemented in:
https://github.com/openthread/openthread/pull/6454
and for NCP:
https://github.com/openthread/wpantund/pull/492 .
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
OpenThread modified its NCP API, so we need to align with these changes
in Zephyr.
One of the major changes was removal of UART from the platform APIs.
`openthread/platform/uart.h` header file was moved to
`examples/platforms/util/uart.h` so we need to use the new location in
Zephyr. This means that OpenThread no longer impose the UART API but for
the simplicity of the upmerge I've kept the UART APIs as they are for
now.
The NCP initialization function have now to register a send handler,
and the appropriate transport driver have to call NCP callbacks when
transmission/reception is done. For now, re-use the existing code of
the UART driver, just as the upstream NCP application does.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Use OpenThread mutex in order to protect OT CLI API call instead of
halting the OpenThread thread.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The OpenThread CLI API has changed therefore it's needed to align
OpenThread Shell implementation in Zephyr with these changes.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
During configuring the low-voltage power supply of IO pads, the npcx
GPIO driver needs to set the related PORTx_OUT_TYPE bit to 1, i.e.
select to 'Open Drain IO type', also. This CL provides a mechanism that
configuring these bits via 'def-lvol-io-list' node automatically in case
the flag of gpios that have been configured to low-voltage power supply
doesn't contain GPIO_OPEN_DRAIN.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
The memory block passed by the user to the i2s_write function is
tightly packed next to each other.
However for 8-bit word_size the I2S hardware expects the data
to be in 2bytes which does not match what is passed by the user.
This will be addressed in a separate PR once the zephyr API committee
finalizes on an I2S API for the user to probe hardware variations.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
1. Update the way test_i2s_state_error_neg test handles
RX overflow.
2. Clean up after test_i2s_state_stopping_neg test in case the
receiving channel is stuck in the STOPPING State if the data
was received prior to calling the STOP trigger.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
1. Allow loopback over different I2S ports
2. Add a config option to indicate if the ports
are separate
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
1. Provide an option to loopback over separate I2S ports
2. Increase the buffer count in the loopback test to 4
3. Update test_i2s_transfer_rx_overrun test on how to
handle RX overrun failures
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
1. Update the SDK API's called in the configure implementation.
The DMA_PrepareTransfer and DMA_SubmitTransfer SDK functions
are not recommneded for use. Replaced the call to these SDK
functions with other SDK API's.
2. Fix the implementation the configure function when multiple
blocks are used.
3. Update the dma_reload implementation. The old reload function
would simply abort the transfer. The new implementation reloads
the DMA buffers for transfer.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Move the STM32F0 specific ram vector table sections into a dedicated
linker snippet included by the new `SRAM_VECTOR_TABLE` symbol.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Add a new Kconfig symbol that explicitly controls whether the vector
table should be placed in RAM. This eliminates the side effect of
`IS_BOOTLOADER` controlling vector table location. Making the condition
a positive assertion also allows the config to be used in CMakeLists
conditions (`zephyr_linker_sources_ifdef()`, etc).
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Remove the `IS_BOOTLOADER` and `BOOTLOADER_SRAM_SIZE` symbols from the
`nucleo_l053r8` and `nucleo_l031k6` boards. The stated reason for
inclusion is to disable the RAM vector table, however this doesn't apply
to the STM32L0 series, only STM32F0.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Initialize `handle.device` to `None` so that the assert after the
matching has a chance to catch errors. Without this, a failed match will
raise an exception on the line above as it attempts to get a property
that doesn't exist.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Document the fact than NVS image of different wbs
are compatible each other if psychical ATE size
is kept.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Signed-off-by: Damian Krolik <damian.krolik@nordicsemi.no>
When existing records stored in the NVS are not properly
aligned according to the current flash driver requirements,
fs->data_wra may be initialized with an unaligned address.
Fix the initialization code, so that fs->data_wra is rounded
up to the nearest multiple of the current flash driver block
size.
The situation may occur during a firmware upgrade which
introduces a new flash driver or changes its parameters.
Signed-off-by: Damian Krolik <damian.krolik@nordicsemi.no>
Remove undefined functions (unsued anymore).
Add missing stub implementation for new DF related radio functions.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add Radio configuration API that gives possiblity configure
reception and sampling of CTE.
Part of alrady implemented API was re-factored to comply
with new API and do complete initialization of registers:
DFECTRL1 and CTEINLINECONF.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
