This adds multi-processing support for Intel Apollo Lake ADSP.
Some of the start-up code is borrowed from ESP32.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The GCC 9.2 toolchain for intel_apl_adsp has builtin atomic
functions already so we can use that instead of the custom
one in arch. This allows the atomic function calls to be
inlined.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
EXCSAVE2 is used for level 2 exception save location.
Since we are using level 2 interrupts, use EXCSAVE7
instead as level 7 interrupts are not being used
by the SoC.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The DSP wall clock timer is a timer driven directly by
external oscillator and is external to the CPU core(s).
It provides a common and synchronized counter for all
CPU cores (which is useful for SMP), instead of
indepedently running local core timer (xtensa_timer).
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Towards cleaning up (and hopefully removing dts_fixup.h in the near
future). We need to move the handling of different names for the irq
flag propety into the driver and out of dts_fixup.h.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Towards cleaning up (and hopefully removing dts_fixup.h in the near
future). We need to move the handling of different names for the irq
flag propety into the driver and out of dts_fixup.h.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Change to code to use the automatically generated DT_INST_*
defines and remove the now unneeded configs and fixups.
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Ring buffer in memory backend does not depends on xtensa adsp board,
so make it general: remove to log_backend_rb and remove dependency on
up_squared_adsp.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Same deal as in commit eddd98f ("kconfig: Replace some single-symbol
'if's with 'depends on'"), for all symbols defined within defconfig
files. See that commit for an explanation.
Maybe 'if's were used originally to mirror the 'if's in the main Kconfig
files, and then it got copied around by people assuming 'if' must work
differently from 'depends on'. It doesn't match in every spot at least.
Better to keep it simple and just consistently use 'depends on' when
it's a single symbol/choice I think. Helps reinforce that 'if' isn't
magic too.
Verified by printing all Kconfig menu nodes (symbols, choices, menus,
etc.) before and after the change and diffing (should show no
difference).
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
All board defconfig files currently set the architecture in addition to
the board and the SoC, by setting e.g. CONFIG_ARM=y. This spams up
defconfig files.
CONFIG_<arch> symbols currently being set in configuration files also
means that they are configurable (can be changed in menuconfig and in
configuration files), even though changing the architecture won't work,
since other things get set from -DBOARD=<board>. Many boards also allow
changing the architecture symbols independently from the SoC symbols,
which doesn't make sense.
Get rid of all assignments to CONFIG_<arch> symbols and clean up the
relationships between symbols and the configuration interface, like
this:
1. Remove the choice with the CONFIG_<arch> symbols in arch/Kconfig and
turn the CONFIG_<arch> symbols into invisible
(promptless/nonconfigurable) symbols instead.
Getting rid of the choice allows the symbols to be 'select'ed (choice
symbols don't support 'select').
2. Select the right CONFIG_<arch> symbol from the SOC_SERIES_* symbols.
This makes sense since you know the architecture if you know the SoC.
Put the select on the SOC_* symbol instead for boards that don't have
a SOC_SERIES_*.
3. Remove all assignments to CONFIG_<arch> symbols. The assignments
would generate errors now, since the symbols are promptless.
The change was done by grepping for assignments to CONFIG_<arch>
symbols, finding the SOC_SERIES_* (or SOC_*) symbol being set in the
same defconfig file, and putting a 'select' on it instead.
See
https://github.com/ulfalizer/zephyr/commits/hide-arch-syms-unsquashed
for a split-up version of this commit, which will make it easier to see
how stuff was done. This needs to go in as one commit though.
This change is safer than it might seem re. outstanding PRs, because any
assignment to CONFIG_<arch> symbols generates an error now, making
outdated stuff easy to catch.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Use standard log settings. Since default LOG_IMMEDIATE has changed to
output one character we have one character ring buffer slots which
limit amount of logs stored.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Create an SoC definition for the Audio DSP on Intel Apollolake
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The xcc specific reentrant syscall implementations are actually useful
for xtensa in general. So move that code from being specific to
intel_s1000 / xcc into generic newlib/libc-hooks.c. This is in prep
for the Zephyr SDK dropping -DMISSING_SYSCALL_NAMES which will make
its version of newlib on xtensa match behavior with xcc.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Lot of misdefined variables that went in undetected due to lack of CI on
this board. Fix them and test build with new SDK.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
DesignWare driver can manage different amount of irqs so let's make it
configurable via DTS.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
generated_dts_board.h is pretty redundant and confusing as a name. Call
it devicetree.h instead.
dts.h would be another option, but DTS stands for "devicetree source"
and is the source code format, so it's a bit confusing too.
The replacement was done by grepping for 'generated_dts_board' and
'GENERATED_DTS_BOARD'.
Two build diagram and input-output SVG files were updated as well, along
with misc. documentation.
hal_ti, mcuboot, and ci-tools updates are included too, in the west.yml
update.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The SRAM address and size are currently available as both
DT_SRAM_{BASE_ADDRESS,SIZE} and as CONFIG_SRAM_{BASE_ADDRESS,SIZE} (via
the Kconfig preprocessor).
Use the CONFIG_SRAM_* versions everywhere, and remove generation of the
DT_SRAM_* versions from gen_defines.py.
The Kconfig symbols currently depend on 'ARC || ARM || NIOS2 || X86'.
Not sure why, so I removed it.
It looks like no configuration files set CONFIG_SRAM_* at the moment, so
another option might be to use the DT_* symbols everywhere instead. Some
Kconfig.defconfig.series files add defaults to them though.
Also improve the help texts for CONFIG_SRAM_* to say that they normally
come from devicetree rather than configuration files.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The XCC toolchain may come with Clang front-end depending on
how it's built. Currently, the only SoC/board using XCC is
the intel_s1000_crb and its XCC toolchain comes with Clang
3.9.0 which has a lot better support for C99 and C++11 than
the portion based on GCC 4.2 (which does not even support
C++11). So this change attempts to use the Clang portion
instead of GCC if the Clang executable exists.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
XCC does not seem to handle if(IS_ENABLED()) well which means
XCC would not get rid of code even IS_ENABLED() is false.
In this case, sys_reboot() call in ztest is in this situation
so add a dummy version for ztest only.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
During LOG_*() macro expansions, XCC expands everything even though
IS_ENABLED() is used. This resulting in various log*() functions
(e.g. log_0(), log_1(), etc.) being required for linking. However,
when CONFIG_LOG_MINIMAL=y, those functions are not compiled from
the logging subsystem. Therefore, to get past the linking error,
dummy versions are being provided.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The newlib of XCC requires linking to _gettimeofday_r() which
should have been provided by its own C library, but obviously
isn't. So we need to provide a dummy version to get past
the build error.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Remove leading/trailing blank lines in .c, .h, .py, .rst, .yml, and
.yaml files.
Will avoid failures with the new CI test in
https://github.com/zephyrproject-rtos/ci-tools/pull/112, though it only
checks changed files.
Move the 'target-notes' target in boards/xtensa/odroid_go/doc/index.rst
to get rid of the trailing blank line there. It was probably misplaced.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The Newlib in the XCC toolchain for intel_s1000_crb has a few
missing functions which are reentrant versions of the one
defined in lib/libc/newlib/libc-hooks.c. So make these call
the correct functions.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Both HAS_I2C_DW and HAS_SPI_DW are not valid unless I2C and
SPI are both selected. So make them dependent on the parent
subsystem config.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The DT_LP_SRAM_* are aliases to DT_MIMO_SRAM_1_* which
are deprecated, so changing these to DT_INST_1_MMIO_SRAM_*.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
When not using XCC, XCHAL_CACHE_MEMCTL_DEFAULT is not defined
which results in some variables not being able to be defined.
So define them.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Newlib requires a _heap_sentry so we add it to the linker script,
similar to what other xtensa linker scripts.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Commit 2d7460482d missed replacing
the path to xtensa_api.h in the intel_s1000_crb soc.c file.
So update it.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Promote the private z_arch_* namespace, which specifies
the interface between the core kernel and the
architecture code, to a new top-level namespace named
arch_*.
This allows our documentation generation to create
online documentation for this set of interfaces,
and this set of interfaces is worth treating in a
more formal way anyway.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Use this short header style in all Kconfig files:
# <description>
# <copyright>
# <license>
...
Also change all <description>s from
# Kconfig[.extension] - Foo-related options
to just
# Foo-related options
It's clear enough that it's about Kconfig.
The <description> cleanup was done with this command, along with some
manual cleanup (big letter at the start, etc.)
git ls-files '*Kconfig*' | \
xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
- Add WDT(0,1) to esp32.dtsi
- Extend the module to be able to use WDT(0,1)
- Some minor refactoring due to usage of device tree
Tests:
- samples/drivers/watchdog
- tests/drivers/watchdog/wdt_basic_api
Note:
- timer module interrupt registers shall be removed when
timer driver implemented.
Signed-off-by: Mohamed ElShahawi <ExtremeGTX@hotmail.com>
