Commit graph

4494 commits

Author SHA1 Message Date
Tom Stirnkorb
0a2ebe74c8 dts: can: add can support for stm32f412 and stm32f413
STMF412 and STM32F413 did not support CAN bus in Zephyr yet.
This adds the device tree entries to be able to use all 2, resp.
3 CAN controllers.

Signed-off-by: Tom Stirnkorb <tom@stirnkorb.me>
2023-01-20 14:35:28 +01:00
Francois Ramu
2b7dc694e5 dts: arm: stm32 devices with adc node have vref-mv default value
Remove the vref-mv = <3300>; property for all the ADC node of
the stm32 devices as it is set by default to 3300mV by the
dts/adc/st,stm32-adc.yaml
(Except for the stm32f303 vref is 3000mV)

Signed-off-by: Francois Ramu <francois.ramu@st.com>
2023-01-20 14:35:17 +01:00
Mateusz Sierszulski
5744709c9c drivers: watchdog: Enable Gecko wdt driver efr32bg_sltb010a
This commit enables the Gecko Watchdog Timer driver on the
efr32bg_sltb010 board.

Signed-off-by: Mateusz Sierszulski <msierszulski@antmicro.com>
2023-01-20 12:22:56 +01:00
Cristiana Preda
4b9015d774 dts: bindings: pwm: imx: change PWM flag cell
Modifying .yaml file to permit polarity options for mimxrt10xx boards.

Signed-off-by: Cristiana Preda <predacristianamaria@gmail.com>
2023-01-20 09:02:02 +01:00
Erwan Gouriou
0b004c0418 dts: stm32f7: Configure rng domain clock
Configure RNG domain clock and align it on USB (as this is the same clk).
This is not stricly required, as this configuration matches default
reset but its more consistent this way.

Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2023-01-19 20:58:15 -08:00
Erwan Gouriou
a8c0545843 dts: stm32f410: No SDMMC available
Remove SDMMC from f410 soc variant since it's not actually available.
Do this in package variant as F410 is included by f412 who has a SDMMC.

Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2023-01-19 20:58:15 -08:00
Erwan Gouriou
681cf6d715 dts: stm32: Configure SDMMC 48MHz domain clock
Provide SDMMC domain clock, when required (because it is common)use
the same as the one selected by USB and RNG.
Otherwise, when available use HSI48, otherwise use the most handy (MSI,
sysclk ...).
PLLSAI is not used as not implemented for now.

Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2023-01-19 20:58:15 -08:00
TOKITA Hiroshi
10ef1a7cba drivers: sensors: Add support for RaspberryPi Pico CPU temperature
Support for the measuring the CPU die temperature
for the RaspberryPi Pico.

Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
2023-01-19 15:32:41 -06:00
Felipe Neves
cd04926d6b sensors: as5600: added as5600
magnetic angle sensor driver.

Signed-off-by: Felipe Neves <felipe.neves@linaro.org>
2023-01-19 15:18:24 -06:00
Erwan Gouriou
ff231fa20a dts: stm32: Populate new properties for exti nodes
Populate new properties required for exti binding.
This only adds gpio related bits for now.

Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2023-01-19 17:20:48 +00:00
Erwan Gouriou
2d51400775 dts/bindings: interrupt-controller: stm32: Add line properties
Add 2 properties in STM32 external interrupt controller:
- num-lines
- line-ranges

Additionally, make interrupt-names a required property.

The properties will help to simplify exti init code in building the
exti_irq_table and simplify the isr related bits.

Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2023-01-19 17:20:48 +00:00
Adrian Warecki
8794de2934 intel_adsp: soc: ace: Add communication widget driver
Intel DSP Communication Widget is a device for generic sideband
message transmit/receive between IPs in a SOC.

Signed-off-by: Adrian Warecki <adrian.warecki@intel.com>
2023-01-18 10:47:21 +01:00
Erwan Gouriou
c5692ed273 dts: stm32l4: Configure RNG domain clocks
Align RNG domain clock confguration on USB clock configuration.
For now we're not able to fully use CLK48 as a mux clock, so
this has to be done on both nodes rather than on a centralized
fashion.

Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2023-01-18 09:56:03 +01:00
Dino Li
a41a4e5e24 espi: it8xxx2: enable espi transaction interrupt
The interrupt is used to wake up EC from low power mode.
So EC does not defer eSPI bus while transaction is accepted.
Fixes EC host commands slow issue.

Signed-off-by: Dino Li <Dino.Li@ite.com.tw>
2023-01-18 09:55:44 +01:00
Pawel Czarnecki
04ec6d72e7 dts: spi: silabs: make peripheral-id property optional
This commit makes the peripheral-id property optional and removes it's
usage from the Gecko SPI driver.

Signed-off-by: Pawel Czarnecki <pczarnecki@antmicro.com>
2023-01-17 15:37:27 -06:00
Pawel Czarnecki
a9948528b5 dts/boards: efr32bg_sltb010a: add spi-through-usart nodes
This commit configures USART0 to act as SPI.

Signed-off-by: Pawel Czarnecki <pczarnecki@antmicro.com>
2023-01-17 15:37:27 -06:00
Pawel Czarnecki
eb4a0ae225 drivers: pinctrl: silabs: add spi handling
This commit adds pinctrl configuration for SPI on USART.

Signed-off-by: Pawel Czarnecki <pczarnecki@antmicro.com>
2023-01-17 15:37:27 -06:00
Jaska Uimonen
a9b3d93550 intel_adsp: dai: Add support for ALH up to 16 nodes
ALH dts definitions need to have 16 nodes, thus add them to supported
platforms (cavs25 and ace15).

Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
2023-01-17 13:06:39 -05:00
Georgios Vasilakis
9951971aee dts: arm: nordic: Set RNG node for Nordic devices
This sets the RNG node that will be used by the Nordic
devices which support TF-M (nRF5340/nRF9160) to use the
defined scheme with psa_generate_random.

Signed-off-by: Georgios Vasilakis <georgios.vasilakis@nordicsemi.no>
2023-01-17 11:36:49 +01:00
Armin Brauns
149ab4f956 dts: arm: st: add reset properties to sdmmc nodes
This allows the sdmmc driver to reset the peripheral during initialisation.

Signed-off-by: Armin Brauns <armin.brauns@embedded-solutions.at>
2023-01-17 11:27:16 +01:00
Marti Bolivar
ef203fd8ae dts: bindings: fix missing information in fixed-partitions
The documentation for the fixed-partitions binding is missing critical
information and is vague in other important respects. This is an
important binding that deserves to be crystal clear. Fix it.

Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
2023-01-17 09:21:56 +01:00
Erwan Gouriou
ed28c26b8a dts: stm32: Describe default domain clock configuration for usb devices
Describe USB default domain clock on all USB devices.
When available select HSI48.
On some series, a default clock my be set by default at start up.
On those series, in order to be able to compute USB clock at runtime,
clock_control driver needs to be aware of configuration and then this
default config has to be described explicitly too.

Default clocks are not enabled though. It is up to board configuration
to provide correct clock configuration (and we should not enabled by
default clocks that would not be required by board configuration).

Note: This change doesn't consider STM32F1/F3 devices, which
have a specific USB clock configuration.

Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2023-01-16 11:23:55 +00:00
Grixa Yrev
15a83fe0a0 drivers: pwm: pwm_mcux: Reload mode option
DTS property "nxp,reload" selects how to load the buffered-registers
with new values.

Signed-off-by: Grixa Yrev <grixayrev@yandex.ru>
2023-01-16 09:26:23 +01:00
Ruibin Chang
344c9c67f9 ITE drivers/pinctrl/it8xxx2: extend pinctrl driver for kscan pins
Extend pinctrl driver for kscan pins.

Signed-off-by: Ruibin Chang <Ruibin.Chang@ite.com.tw>
2023-01-14 09:22:39 +01:00
Ruibin Chang
d7f482a022 ITE driver/gpio/it8xxx2: add kscan pins gpio driver
Add kscan pins gpio driver for KSI[7:0], KSO[15:0] pins that
they can be configured to gpio mode. These pins registers address,
bit fields and function are different from GPIO group, so I create
a new compatible driver for these pins.

Signed-off-by: Ruibin Chang <Ruibin.Chang@ite.com.tw>
2023-01-14 09:22:39 +01:00
Declan Snyder
3bc095a810 sd: MMC API, and MMC Spec
- Adds the declaration of the MMC API
- Adds MMC spec related declarations
- Adds some properties to sdhc dts binding for mmc

Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
2023-01-14 09:22:22 +01:00
Declan Snyder
19bd9a3618 boards: arm: Renamed NXP usdhc in imxrt5xx
The names of these peripherals in the device tree
did not match the Reference Manual for the RT500.

Also fixed a typo in a comment referring to USDHC which should have been
about USB.

Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
2023-01-14 09:22:22 +01:00
Declan Snyder
36b6dec832 boards: arm: mimxrt595_evk: Plumbs RT595 USDHC
- Adds the pin controls and ushdc settings in device tree
- Attaches clock to USDHC in soc.c
- Adds binding for mmc

Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
2023-01-14 09:22:22 +01:00
Mateusz Sierszulski
d58189f214 drivers: i2c: Enable Gecko i2c driver for efr32bg_sltb010a
This commit enables the Gecko i2c driver on the efr32bg_sltb010a board.

Signed-off-by: Mateusz Sierszulski <msierszulski@antmicro.com>
2023-01-13 10:23:55 -06:00
YuLong Yao
a258a59c6f dts: gd32a50x: introduce gd32a50x series
introduce gd32a50x series

Signed-off-by: YuLong Yao <feilongphone@gmail.com>
2023-01-12 21:45:38 +01:00
Lucas Tamborrino
9421785fd0 dts: esp32c3: add bindings to GDMA
Add GDMA node to esp32c3.

Signed-off-by: Lucas Tamborrino <lucas.tamborrino@espressif.com>
2023-01-12 19:09:01 +01:00
Gerard Marull-Paretas
8c73db666c drivers: regulator: npm1100: add initial support
While nPM1100 is to be operated in fixed configuration for some
applications, it has some degree of configuration via GPIOs. For
example, mode (auto/PWM) can be configured via MODE pin. VBUS current
can also be adjusted using ISET pin, even though there is no API yet to
limit the PMIC input current.

This patch adds a new regulator class driver for nPM1100 PMIC, so that
it can be used with the standard regulator API when needed.

Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2023-01-12 19:07:05 +01:00
Mateusz Sierszulski
b36a31fd7a drivers: entropy: Add Gecko trng driver for EFR32BG22
This commit enables entropy driver on EFR32BG22 SoC.

Signed-off-by: Mateusz Sierszulski <msierszulski@antmicro.com>
2023-01-12 15:22:11 +00:00
Mirko Bottarelli
5f9eb210f7 boards: stm32l412: fifo compatibility to spi2
In file stm32l412.dtsi, spi2 was missing fifo compatibility,
this way failing to initialise fifo threshold correctly
when spi data width is configured.

Signed-off-by: Mirko Bottarelli <mirko.bottarelli@gmail.com>
2023-01-12 14:58:57 +01:00
Marco Peter
077273add7 dts: arm: st: Fix type in clock assignment of timer15
STM32Gxxx controllers only have a single APB bus.

Signed-off-by: Marco Peter <marco.peter@joylab.ch>
2023-01-12 13:45:54 +01:00
Erwan Gouriou
c4b53d5daa dts: stm32f4: stm32f437 is a variant of stm32f427
stm32f427 + crypto = stm32f437

Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2023-01-12 12:46:53 +01:00
Erwan Gouriou
7c147ef552 include: dt-bindings: stm32f4_clock.h: Add DCKCFGR registers
Add f4 binding files to provide DCKCFGR registers description
to enable clock selection for F410/F427/F446 variant lines

Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2023-01-12 12:46:53 +01:00
Erwan Gouriou
92b8fb4db2 dts: stm32f4: rng is available on stm32f410
Add rng definition to f410.
Though, don't inherit directly in f412 as it's integrated
in a different way.

Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2023-01-12 12:46:53 +01:00
Erwan Gouriou
0050ad80a9 dts: stm32f4: stm32f412 is a variant of stm32f410
In order to ease description of DCKCFG regsiters,
make f412 a variant of f410 as it supposed to be.

Only exception is missing DAC1.

Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2023-01-12 12:46:53 +01:00
Ruibin Chang
50274718e2 ITE dts/riscv/ite: separate dtsi node to it81xx2 from it8xxx2
The interrupt and watchdog registers of the it82xx2 will be
remapped, so these device nodes should be separated to
it81xx2 from it8xxx2. it8xxx2 dtsi are common settings
for it81xx2 and it82xx2.

Signed-off-by: Ruibin Chang <Ruibin.Chang@ite.com.tw>
2023-01-11 09:42:11 +01:00
Michał Barnaś
0918442ba6 ec_host_cmd: add ITE SHI peripheral for the host commands
This commit adds the support for host commands being transported
by the Serial Host Interface on the IT8xxx2 SoC.

Signed-off-by: Michał Barnaś <mb@semihalf.com>
2023-01-11 09:38:45 +01:00
Michał Barnaś
3ae105e76b ec_host_cmd: add NPCX SHI peripheral for the host commands
This commit adds the support for host commands being transported
by the Serial Host Interface on the NPCX SoC.

Signed-off-by: Michał Barnaś <mb@semihalf.com>
2023-01-11 09:38:45 +01:00
Nick Ward
658b618289 drivers: pwm: add NXP PCA9685 controller
Adds PCA9685 16-channel, 12-bit PWM Fm+ I2C-bus LED controller

Signed-off-by: Nick Ward <nix.ward@gmail.com>
2023-01-11 09:38:18 +01:00
Tom Burdick
15786ce648 sensor: tdk 42688 driver
Adds a driver for TDK InvenSense 42688 six axis IMU. Verified using
the sensor shell sample app via:

- sensor info
- sensor get icm42688p@0

Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Signed-off-by: Yuval Peress <peress@google.com>
2023-01-10 14:45:36 -06:00
Francois Ramu
823b0e6016 dts: arm: stm32u5 family has a x2 factor on its LPTIM clock
Add the st,static-prescaler DTS property to the
stm32u5 family on the LPTIM1.
Also present on lptim3, 4 but not defined yet.

Signed-off-by: Francois Ramu <francois.ramu@st.com>
2023-01-10 15:54:25 +00:00
Francois Ramu
572b286010 dts: bindings: LPtimer of stm32 has a x2 factor on its clock
Add a st,static-prescaler optional property to DTS
of the stm32 where the LPTIM has a x2 factor on
its clock input.
This property is present or not depending on the stm32.

Signed-off-by: Francois Ramu <francois.ramu@st.com>
2023-01-10 15:54:25 +00:00
Fabio Baltieri
5c3032e51e bindings: fuel-gauge: drop redundant compatible
Drop compatible from fuel-gauge.yaml, it's not needed since this binding
is not meant to be used directly, and is also incorrect as it includes
the "yaml" suffix.

Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
2023-01-09 16:21:11 +00:00
Tim Lin
31791f87e4 ITE: dts: it8xxx2: Separate device nodes from it8xxx2.dtsi
The GCR, PINCTRL, I2C and WUC registers of the it82xx2 will be remapped,
so these device nodes will not be in the it8xxx2.dtsi, these should be
separated to create a it81xx2.dtsi.

Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
2023-01-09 10:14:21 +01:00
Erwan Gouriou
306f4d0bbc dts: stm32: flash: Get all series using same driver to use same compat
Compat "st,stm32f1-flash-controller" is now used by all series using
F1x flash driver.

Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2023-01-08 19:49:12 +01:00
Erwan Gouriou
561fd80180 dts: stm32wb: Add a node for stm32wb rf
Purpose of this node is only to provide a way to configure RF
clock using device tree and clock_control driver.

Default configuration is reproducing existing hard-coded configuration.

Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2023-01-08 19:48:27 +01:00