intel_s1000 is an SoC having cavs21_LX6HiFi3_RF3_WB16 as the CPU which
belongs to Xtensa family. This is being used in intel_s1000_crb.
Change-Id: Ic424aa77557bf31024ddbf3f1d76b72a4adb8f66
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
ESP-IDF commit cb31222e added the dependency on a file named
"sdkconfig.h", which is equivalent to "autoconf.h" generated by kbuild
used in Zephyr. It does not depend on anything from that file, though,
so just provide an empty file to keep the compiler from complaining.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Include `soc.h` first, which will include the ESP-IDF headers -- which
will define the `BIT()` macro without checking if they're already
defined, like the Zephyr headers do.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
When in SMP mode, the nested/irq_stack/current fields are specific to
the current CPU and not to the kernel as a whole, so we need an array
of these. Place them in a _cpu_t struct and implement a
_arch_curr_cpu() function to retrieve the pointer.
When not in SMP mode, the first CPU's fields are defined as a unioned
with the first _cpu_t record. This permits compatibility with legacy
assembly on other platforms. Long term, all users, including
uniprocessor architectures, should be updated to use the new scheme.
Fundamentally this is just renaming: the structure layout and runtime
code do not change on any existing platforms and won't until someone
defines a second CPU.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Simply define the Kconfig variables in this patch so they can be used
in later patches. Define MP_NUM_CPUS correctly on esp32. No code
changes.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This is a mostly-internal API to start a secondary system CPU, with an
implementation for the ESP-32 "APP" cpu. Exposed in kernel.h because
it's plausibly useful for asymmetric MP code managed by an app.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This python script reads the core-isa.h interrupt definitions (via
running a template file through the toolchain preprocessor to generate
an input file) and emits a fully populated, optimized C handling code
that binary searches only the declared interrupts at a given level and
correctly detects spurious interrupts (and/or incorrect core-isa.h
definitions).
The generated code, alas, turns out not to be any faster than simply
searching the interrupt mask with CLZ (er, NSAU in xtensese), though
it could be faster in theory if the compiler made different choices,
see comments. But I like this for the robustness of the fully
populated search trees and the checking of level vs. mask.
This simply commits the script output into the source tree, including
some checking code to force a build error if the toolchain changes the
headers incompatibly. It would be better long term to have these
headers be generated at build time, but that requires more cmake fu
than I have.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Introducing CMake is an important step in a larger effort to make
Zephyr easy to use for application developers working on different
platforms with different development environment needs.
Simplified, this change retains Kconfig as-is, and replaces all
Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild
offers is replaced by a set of CMake extentions. These extentions have
either provided simple one-to-one translations of KBuild features or
introduced new concepts that replace KBuild concepts.
This is a breaking change for existing test infrastructure and build
scripts that are maintained out-of-tree. But for FW itself, no porting
should be necessary.
For users that just want to continue their work with minimal
disruption the following should suffice:
Install CMake 3.8.2+
Port any out-of-tree Makefiles to CMake.
Learn the absolute minimum about the new command line interface:
$ cd samples/hello_world
$ mkdir build && cd build
$ cmake -DBOARD=nrf52_pca10040 ..
$ cd build
$ make
PR: zephyrproject-rtos#4692
docs: http://docs.zephyrproject.org/getting_started/getting_started.html
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
Also provide their prototypes in `soc.h`. This should help
readability, since some ROM functions, with their names as provided by
Espressif, have sometimes the same prefix as Zephyr APIs.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Move all QEMU related defines to the boards and cleanup xtensa platforms
which were marked to be QEMU capable by mistake.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Esp-idf defines the BIT macro that is also defined in Zephyr's
misc/util.h. Fix the issue by including the esp-idf headers first, so
that a check in util.h won't redefine the macro if it's already
defined.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
- .text, .text.*, .literal, .literal.* had no matching input section
rule and were being passed to the output binary verbatim. These
are all now in the output "text" section as intended.
- various rules in the data section were unnecessarily using KEEP().
- SW_ISR_TABLE wasn't included in linker script anywhere and was
ending up in its own section, and not the data section as intended.
- noinit section didn't exist at all, now defined.
Issue: ZEP-2508
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This cleans up the exception handling by removing the table declaration
from xtensa_intr_asm.S, and removing the unused
_xt_set_exception_handler() function.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
The Xtensa port was the only one remaining to be converted to the new
way of connecting interrupts in Zephyr. Some things are still
unconverted, mainly the exception table, and this will be performed
another time.
Of note: _irq_priority_set() isn't called on _ARCH_IRQ_CONNECT(), since
IRQs can't change priority on Xtensa: while the architecture has the
concept of interrupt priority levels, each line has a fixed level and
can't be changed.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
This provides basic GPIO support, with interrupts, and the ability to
read and write to ports on a pin-by-pin basis.
Jira: ZEP-2286
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
The first stage bootloader, part of the ESP32 ROM, already sets up
a stack that's sufficient to execute C programs. So, instead of
implementing __stack() in assembly, do it in C to simplify things
slightly.
This ESP32-specific initialization will perform the following:
- Disable the watchdog timer that's enabled by the bootloader
- Move exception handlers to IRAM
- Disable normal interrupts
- Disable the second CPU
- Zero out the BSS segment
Things that might be performed in the future include setting up the
CPU frequency, memory protection regions, and enabling the flash
cache.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
This is a minimal driver enabling console output during the port
bringup. While the driver works, only one of the three UART devices
are supported, and there isn't any way to change any parameters or
use interrupts. This will most likely be superceded by a proper
driver after the port has matured.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Due to the configurable nature of the Xtensa platform, the generic name of
"LX6" cannot be used to describe an SoC as far as Zephyr goes. So ESP32 is
defined both as a SoC and as a board.
This is based on work by Rajavardhan Gundi.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Use TOOLCHAIN_VARIANT to indicate what XCC toolchain release
to use.
Set a reasonable default for the RG-2016.4 toolchain release.
D_108mini, D_212GP, D_233L are only in RF-2016.4, set that
appropriately.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add QEMU_CPU_TYPE for the sample_controller, so that zephyr image could
be run on QEMU with sample_controller core.
Change-Id: Id9e97a43c4b7921142289dcf97ff782993ca0463
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
This SoC, in its default configuration, does not have any SW IRQ below
the EXCM level. This make it unsuitable to use irq_offload() and thus
almost untestable.
Decision was made to remove this configuration in favorof custom one
XRC_D2PM_5swIrq, which is the same core but with additional 4 SW IRQs
of level 1 and an additional timer.
Issue: ZEP-2029
Change-Id: Iee4f8346aa9d610e14898444f78d28ef0ac4cef2
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
Move linker/common-rom.ld between .rodata sections so that it's together
with other immutable data.
Move linker/common-ram.ld before the .bss section, so that .bss does not
appear between data sections, which had two consequences:
- there's a .bss-sized gap in the ELF image, and
- PHDR segment that covers .bss overlaps the segment that covers .data,
resulting in the following xt-run warning:
( [ sample_controller ] load_bfd ) *WARNING* Executable segment
[ 60004d60, 600079a7 ] overlaps an existing executable segment
Change-Id: I2db46f4656e240016fe60883057cc000b6377180
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
* CONFIG_SOC is now properly set and we do not need a separate
XTENSA_CORE build variable
* Some unnecessary macro -D CFLAGS in the Xtensa Makefile removed
* There is no default SOC selection, it is now done explicitly in
the board's defconfig
* CONFIG_<board name> now renamed to CONFIG_SOC_<board name in
uppercase> to conform to established style.
Issue: ZEP-1711
Change-Id: I88997530db09970b7fdd1c3e3d355bfca9d0be1a
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This core is not depreciated and compilationfor it is even faster than D_233L.
Change-Id: I6b8149ca9e879770c3ed0973ffb9304e2e3c8d8d
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
This was introduced during a copy/paste when updating patch
https://gerrit.zephyrproject.org/r/#/c/10323/6..7
Change-Id: Id6857dd28a16974361932285b44559f702c4d910
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
Master branch changed requirements for license headers while this
branch has been in development.
Change-Id: I9bce16ff275057a4bb664019628fc9b6de7aef7c
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Provide generic support for running zephyr kernels on xtensa QEMU and
map D_233L SoC to dc233c QEMU core.
Change-Id: Ie804588f750213a7cc54dbc95c86ee4d62ba1ea5
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Added arch sub folder, make files and Kconfig files for a set of standard SoCs.
Change-Id: I4ee9cba966860072e55c95795d87356b665e4d49
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
