These bindings override the 'category: optional' for 'clocks' from
uart.yaml with 'category: required', but none of the nodes that use the
bindings set 'clocks'.
Maybe it's a copy-paste error. Remove the 'clock' overrides.
Fixes some errors in
https://github.com/zephyrproject-rtos/zephyr/issues/17532.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
These bindings !include adc.yaml, but their device tree nodes never set
'clocks':
dts/bindings/iio/adc/atmel,sam-afec.yaml
dts/bindings/iio/adc/atmel,sam0-adc.yaml
dts/bindings/iio/adc/nordic,nrf-adc.yaml
dts/bindings/iio/adc/nordic,nrf-saadc.yaml
The nodes for these bindings do set it (think it's consistent for
st,stm32-adc.yaml):
dts/bindings/iio/adc/nxp,kinetis-adc12.yaml
dts/bindings/iio/adc/st,stm32-adc.yaml
Make 'clocks' optional in adc.yaml. Maybe it should be changed to
required on some platforms (!including bindings can change 'optional' to
'required').
Fixes a bunch of errors in
https://github.com/zephyrproject-rtos/zephyr/issues/17532.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Setting it seems rare. Maybe it could be changed to required on just
some platforms (!including bindings can change 'optional' to
'required').
Fixes a bunch of errors in
https://github.com/zephyrproject-rtos/zephyr/issues/17532.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
None of the interrupt controller nodes that use this binding in the
device tree files set 'reg' (or have a unit address).
Fixes a bunch of errors in
https://github.com/zephyrproject-rtos/zephyr/issues/17532.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This patch populates "clocks" property in stm32 usb nodes
for clock related usb configuration code of each dtsi files
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The st,stm32-can binding specified several required properties that were
never set in actual .dts files and not used by the code. Remove them at
this time since they aren't being used.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We removed support for cell_string some time ago, so we have some stale
references in a number of bindings that we can remove.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Note that these appear as
properties: {erase,write}-block-size: label: ...
rather than as
properties: label: ...
I can't see anything looking at 'label' for individual properties in
bindings, so it's probably dead code. Labels are fetched from the device
tree in extract/flash.py.
Piggyback removal of some 'generation: define's and a redundant pair of
YAML document separators.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The spi-nor flash nodes require a jedec-id property as per the binding.
We add the jedec-id's as best we can determine based on the data sheets
for the various flash modules on these boards.
However these id's should be validated by actually reading the value to
ensure they are correct.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We define "arc,num-irq-priority-bits" and "intel,num-irq-priority-bits"
as required properties in the bindings for the interrupt controllers
however we never specify these properties in any .dts files or use them
in any code.
Remove them as stale properties in the binding files.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Fix USB phy node for stm32l432 and stm32l452, which contain
a USB controller and not a OTG FS controller.
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
Now that the generation script doesn't look at the "generation" in the
YAML, we can remove it from the binding files.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
uint8-array is the name for what the devicetree specification calls a
bytestring.
The original parsing code treated square brackets as equivalent to
quotes or angle brackets, failing to interpret elements as hex-encoded.
This was a bug, corrected in this patch by processing content as a
sequence of hex-encoded bytes with arbitrary whitespace.
The original generating code emitted the property as individual
elements. Replace that with generation of a single structure
initializer, which is more useful in cases where the length of a
property value may vary between nodes.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
1) dts/bindings/mmc/mmc.yaml: specifies common mmc.
2) dts/bindings/mmc/nxp,imx-usdhc.yaml: specifies
nxp usdhc module which inherits mmc.
3) dts/arm/nxp/nxp_rt.dtsi: usdhc support on RT chip.
4) boards/arm/mimxrt1050_evk/mimxrt1050_evk.dts:
usdhc slot support on mimxrt1050_evk board.
Signed-off-by: Jun Yang <jun.yang@nxp.com>
A number of minor issues with the 'fixed-clock' support:
* Fix the #clock-cells to be 0
* Fix nxp_ke1xf.dtsi to set #clock-cells 0 and the clock reference to
only be a phandle.
* Fix the generation script to only generate what it should for a
'fixed-clock'
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
A few clock bindings only have a single clock cell defined, but the
binding described more than one cell.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add clock support for STM32G0X SoC series.
Signed-off-by: Philippe Retornaz <philippe@shapescale.com
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add flash support for STM32G0X SoC series.
Signed-off-by: Philippe Retornaz <philippe@shapescale.com
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This patch adds support for the STM32G071xx
from STMicroelectronics.
Signed-off-by: Philippe Retornaz <philippe@shapescale.com>
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add support to STM LSM6DSO 6-axis IMU sensor driver.
This driver supports communication with device though both
I2C and SPI bus and both polling and drdy trigger mode.
This driver supports also the sensorhub mode with the possibility
to connect a maximum of two external devices, typically a
magnetometer and an environmental sensor, currently selected among
following devices: lis2mdl magnetometer, lps22hh or lps22hb
pressure and temperature sensors, HTS221 humidity sensor.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Add support to STM LPS22HH pressure and temperature sensor.
The driver support I2C and SPI bus communication and both
polling and drdy trigger mode.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
This commit adds binding for clock provider with fixed frequency.
Signed-off-by: Derek Hageman <hageman@inthat.cloud>
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
