Update the new API to use K_USER as the flags for both
CONFIG_USERSPACE and CONFIG_TEST_USERSPACE. Also, fix the linker
script to properly include the suites, tests, and rules.
Fixes#44108
Signed-off-by: Yuval Peress <peress@google.com>
This commit introduces changes in three places in order to fix the
problem with timer-related tests on FE310-based boards:
* tests/kernel/sleep/kernel.common.timing
* tests/kernel/tickless/tickless_concept/kernel.tickless.concept
* tests/kernel/workq/work_queue/kernel.workqueue
The first change is the modification of the SYS_CLOCK_HW_CYCLES_PER_SEC
value back to 32768 Hz to match FE310's datasheet description.
The second change is CLINT frequency reduction in Renode simulation
model to 16 MHz to correspond with the oscillator frequency given by the
FE310's datasheet and the HiFive1 board schematic. This fixes the first
two tests.
The last change is reducing the MIN_DELAY define to 100. This causes the
RISC-V machine timer driver to update the mtimecmp register more often,
which in turn addresses the `work_queue/kernel.workqueue` problem with
work items finishing prematurely, causing the above-mentioned test to
fail.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
ARCH_HAS_USERSPACE and ARCH_HAS_STACK_PROTECTION are direct functions
of RISCV_PMP regardless of the SoC.
PMP_STACK_GUARD is a function of HW_STACK_PROTECTION (from
ARCH_HAS_STACK_PROTECTION) and not the other way around.
This allows for tests/kernel/fatal/exception to test protection against
various stack overflows based on the PMP stack guard functionality.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
PHY TX power configuration must be added into soc level.
It was previously hardcoded in hal_espressif, which was removed.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
The GigaDevice HAL defines CAN_MODE_NORMAL, which conflicts with the
zephyr/drivers/can.h header definition. Undefine it in soc.h.
Fixes: #45611
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Current Espressif porting requires standard include as
part of hal implementation. compiler_flags.cmake checks for
variant name to keep those stdinc in build.
Instead of using variant name as check, use this new CONFIG
to make it clear and to allow having toolchain integrated
in zephyr-sdk package.
stdinc dependency in hal_espressif will be worked out and removed
soon.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Assembler files were not migrated with the new <zephyr/...> prefix.
Note that the conversion has been scripted, refer to #45388 for more
details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Linker files were not migrated with the new <zephyr/...> prefix. Note
that the conversion has been scripted, refer to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
In order to bring consistency in-tree, migrate all soc code to the
new prefix <zephyr/...>. Note that the conversion has been scripted,
refer to zephyrproject-rtos#45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
<zephyr/zephyr/types.h> is no longer available, <zephyr/types.h> should
be used instead.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add OpenISA RV32M1 pinctrl header file to define SoC specific pinctrl_soc_t
structure. This is used to store pin configurations for the pinctrl driver.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
This modification is required to enable flash encryption.
Using hal implementation of spi_flash calls maintains
compability amongs different socs while offering
latest esp-idf enhancements.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Changes signature so it takes uint32_t instead of pointer to a
register.
Later `sys_read*` and `sys_write*` functions are used, which cast
given address to volatile pointer anyway.
This required changing types of some fields in LiteX GPIO driver and
removal of two casts in clock control driver.
There was a weird assert from LiteX GPIO driver, which checked whether
size of first register in dts was a multiple of 4.
It didn't make much sense, so I removed it.
Previous dts was describing size of a register in terms of subregisters
used. New one uses size of register, so right now it is almost always
4 bytes.
Most drivers don't read register size from dts anyway, so only changes
had to be made in GPIO and clock control drivers.
Both use `litex_read` and `litex_write` to operate on `n`bytes.
Now GPIO driver calculates this `n` value in compile time from given
number of pins and stores it in `reg_size` field of config struct like
before.
Registe sizes in clock control driver are hardcoded, because they are
tied to LiteX wrapper anyway.
This makes it possible to have code, independent of CSR data width.
Signed-off-by: Michal Sieron <msieron@internships.antmicro.com>
Adds LITEX_CSR_DATA_WIDTH option to Kconfig
Depending on its value appropriate read/write handling is used
for accessing CSR registers.
By using `>=` in preprocessor conditions it is somewhat future-proofed.
Doesn't touch `litex_read` and `litex_write` yet.
Signed-off-by: Michal Sieron <msieron@internships.antmicro.com>
Add the appropriate hooks effectively replacing the old implementation
with the new one.
Also the stackguard wasn't properly enforced especially with the
usermode combination. This is now fixed.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This PR removes common-rom.ld section so that logging sections
can now be mapped into RAM area.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
CONFIG_RISCV_ATOMICS_ISA enables A extension.
CONFIG_RISCV_MUL_ISA enables M extension.
CONFIG_FLOAT_HARD enables F extension. (FPU)
Since we changed to use configuration options to enable extensions,
we no longer need to specify extensions using zephyr_compile_options.
Signed-off-by: Dino Li <Dino.Li@ite.com.tw>
1.Declare the member type to match the kscan_it8xxx2_regs, so
we needn't to transform the local structure in the function.
2.Stop using DRV_CONFIG, DRV_DATA, DRV_REG macros.
3.Delete unused register defines.
Signed-off-by: Ruibin Chang <Ruibin.Chang@ite.com.tw>
This reverts commit b1ad97bc26 since it
causes the following build failure:
cc1: error: requested ABI requires '-march' to subsume the 'F'
extension
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Rather than specify input clock for each peripheral individually, instead
specify the relevant clocks in DTS.
This will enable easier support for non-default coreclk on fe310 in a
follow-up CL.
Signed-off-by: Shawn Nematbakhsh <shawn@rivosinc.com>
IT8xxx2 supports the standard 'F' extension for single-precision
floating point: select the relevant Kconfig option for the SoC so
users can build floating-point code.
Signed-off-by: Peter Marheine <pmarheine@chromium.org>
Change-Id: Ie6da1d38d5654061553cb1ce13b0a0a96aa71ce0
The autoconf.h header is not required because the definitions present in
the file are exposed using the compiler `-imacros` flag.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Don't leave idle state if soc isn't waked-up by an interrupt.
(We change to check interrupt controller register)
Signed-off-by: Dino Li <Dino.Li@ite.com.tw>
When run the test_mutex_lock_timeout(), we need more time (>300us)
for the testing thread to finish the job, or we will get a fail
(we didn't run the test before).
Because our event timer doesn't handle the float part, and 32768 is
divisible by 8192 which is closest to kernel tick default 10000, I add
CONFIG_SYS_CLOCK_TICKS_PER_SEC = 8192 for all board of it8xxx2 series.
If the CONFIG_SYS_CLOCK_TICKS_PER_SEC = 32768,
the 10 tick of timeout = 300us.
If the CONFIG_SYS_CLOCK_TICKS_PER_SEC = 8192,
the 10 tick of timeout = 1200us.
So we can get more time to finish the job.
Verified by follow test pattern:
west build -p auto -b it8xxx2_evb tests/kernel/sleep
west build -p auto -b it8xxx2_evb tests/subsys/portability/cmsis_rtos_v2
fixes#43513fixes#42847
Signed-off-by: Ruibin Chang <Ruibin.Chang@ite.com.tw>
Customize busy wait timer for micro-seconds accuracy.
Verified by follow test pattern:
west build -p auto -b it8xxx2_evb tests/kernel/timer/timer_api
west build -p auto -b it8xxx2_evb tests/kernel/timer/timer_error_case
west build -p auto -b it8xxx2_evb tests/kernel/timer/timer_monotonic
west build -p auto -b it8xxx2_evb tests/kernel/timer/starve
west build -p auto -b it8xxx2_evb tests/kernel/context
west build -p auto -b it8xxx2_evb tests/drivers/adc/adc_api
Signed-off-by: Ruibin Chang <Ruibin.Chang@ite.com.tw>
This commit fixes the default value of SYS_CLOCK_HW_CYCLES_PER_SEC
option. The previous value of 32768 is not consistent with the
documentation of FE310 SoC. Only FE310-based boards rely on the default
value of this option; other boards from the Freedom series define it
themselves.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
This commit makes the transition from the pinmux driver to the pinctrl
driver. It also modifies UART, SPI and I2C drivers used in FE310-based
boards to use the new pinctrl API.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
As mentioned in #42882, the I2C of IT8XXX2 is designed for two different
IP blocks, so this PR divides this I2C driver into two compatibles.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
Using IRQ as source for interrupt values can
fail when installing irq_connect_dynamic, as
IRQ can previously be enabled. This updates
the logic to use source map and allows
default irq_enable() and irq_disable() to call
esp32c3 interrupt allocator implementation.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Enable support for mtvec vectored mode for privilege SOCs. This
is an optional feature and takes up addtional code space. It is
necessary to support this feature for privilege SOCs that only
support mtvec vectored mode.
Change was tested on qemu_riscv32 and qemu_riscv64 boards with
CONFIG_RISCV_MTVEC_VECTORED_MODE enabled.
Signed-off-by: William Patty <wpatty24@gmail.com>
According to Kconfig guidelines, boolean prompts must not start with
"Enable...". The following command has been used to automate the changes
in this patch:
sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig*
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The ADC driver of IT81302 chip can support channels 0-7 & 13-16.
This PR adds to implement ADC channels 13-16.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
Use CLINT to send interrupts to another CPU. SMP support is kinda
incomplete without it.
This patch only enables it for riscv-privilege platforms - specifically,
"virt" one.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
Secondary CPUs are now initialised and made available to the system. If
the system has more CPUs than configured via CONFIG_MP_NUM_CPUS, those
are still left looping as before.
Some implementations of `soc_interrupt_init` also changed to use
`arch_irq_lock` instead of `irq_lock`.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
Aligning with the rest of PM API, replace pm_power_state_exit_post_ops
with pm_state_exit_post_ops.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This register is a pre-define hardware slave A and can be accessed
through I2C0. It is not currently used, so it can be disabled to
avoid illegal access.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
Introduce a new "zephyr,memory-region" compatible to be used when a new
memory region must be created in the linker script from the devicetree
nodes using the compatible.
Remove also the LINKER_DT_REGION_FROM_NODE macro and add a new
LINKER_DT_REGIONS macro to cycle through all the compatible regions.
In the same PR modify the DTS files and the linker scripts.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
This enables the below configuration so the AP and EC are able to
communicate over eSPI:
CONFIG_ESPI_PERIPHERAL_EC_HOST_CMD
CONFIG_ESPI_PERIPHERAL_ACPI_SHM_REGION
CONFIG_ESPI_PERIPHERAL_CUSTOM_OPCODE
Signed-off-by: Dino Li <Dino.Li@ite.com.tw>
This patch adds GPIO and 96board LS (Low Speed)iexpansion connector
support for SiFive HiFive Unleashed and also enables GPIO basic test.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
replacing usage of the ESPTOOLPY_FLASHSIZE config
by the equivalent dt property path
Signed-off-by: Glauber Maroto Ferreira <glauber.ferreira@espressif.com>
Non-standard `jalr rd, rs` pseudo-instructions are used.
This commit changes them to `ret` for standard return pseudo-instruction
or `jalr rd, rs, 0` for no offset jump register and link.
Fixes#41100.
Signed-off-by: Henry Hsieh <r901042004@yahoo.com.tw>
This configures soc and flash size definition
using DTSI information instead of hardcoded
values.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
This modifies esp32c3 SOC configuration to support MCUBoot.
CmakeLists is moved from board to soc specific. It also
includes MCUBoot changes.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
This change creates XiP image handling and proper
LMA and VMA regions configurations.
This also adds common-ram.ld and common-rom.ld sections that
require explicit handling due to image sections limitation
in esptool.
Move additional drivers into IRAM to protect against
flash cache disable read/write operation.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
BBRAM content should be cleared when boot from cutoff. Compare magic
number to decide whether to clear entire BBRAM.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
For functions returning nothing, there is no need to document
with @return, as Doxgen complains about "documented empty
return type of ...".
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Many ARM SoCs included <devicetree.h> likely due to:
1. nvic.h not being self-contained
2. As a result of copy-paste
Some RISC-V SoCs had the same problem, in this case likely due to
copy-paste from ARM. The <devicetree.h> header has been removed using
the following command:
sed -i ':a;N;$!ba;s/#include <devicetree\.h>\n//g' soc/**/soc.h
soc.h files that make a legitimate usage of the API have not been
changed.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The header was not self-contained: it uses DT and utility macros but
<devicetree.h> and <sys/util_macro.h> were not included.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The default I2C channel 3 is used by alternate function of GPIO H1/H2
Krabby uses GPIO F2/F3 as I2C channel 3, so we need to add the
compatibility of the GPIO F2/F3.
TEST=test on it8xxx2_evb:
zmake configure -b zephyr/projects/it8xxx2_evb/
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
Enable CONFIG_RISCV_PMP in qemu virt soc. Use this SoC as CI testing
platform of RISC-V PMP and Userspace.
Signed-off-by: Jim Shu <cwshu@andestech.com>
If there are no console messages input at an interval of 15
seconds, the system will be able to enter suspend mode.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
Change the settings to support pinctrl on the GD32VF103.
- Split soc/arm/gigadevice/common/pinctrl_soc.h
and put it into include/dt-bindings.
- Leave some definitions that can't handle with device tree compiler
in pinctrl_soc.h.
- Remove dependency to SOC_FAMILY_GD32 because always enabled it
if GD32_HAS_AF(IO)_PINMAX was selected.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
GD32V processor core is used non-standard bitmask
for mcause register. Add option to configure the bitmask
to support GD32V.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
As memory region names are now derived purely from devicetree, remove
the `name` parameter from `DT_REGION_FROM_NODE_STATUS_OKAY`. Name is
`zephyr,linker-region` if it exists, otherwise the node path.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
IT8XXX2 uses shared ns16550.c driver which does not provide a power
management callback(pm_action_cb), so create driver to handle
IT8XXX2 specific UART features.
note: pm_action_cb(old name: pm_control_fn)
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
Use i2c_hal functions to enable support for
multiple SoCs.
Use DT compat to enable I2C from device
tree configuration
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
This joins all clock control handling to same source
by using hal clock functions. It also brings ESP32C3
clock support.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Add the power state of deep doze. When system enters deep doze, the
clock of CPU and EC can be stopped to reduce power consumption. And
enable the UART Rx WUI before entering deep doze to wake up EC and
CPU.
Tested on it8xxx2_evb board. It will reduce 5.25mA when system enters
deep doze mode.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
Use the shared CONFIG_SERIAL_INIT_PRIORITY for driver initialization
priority.
Override the default value for the NEORV32 SoC to ensure the serial
driver is initialized after the syscon driver by default.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Implement the CPU idle task. The system should enter this task when
there is no any task to ensure power saving.
Tested on it8xxx2_evb board. It will reduce 12.5mA when system enters
the CPU idle task.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
GPIO L/K groups:
On IT81202 (128-pins package), the pins of GPIO group K and L aren't
bonding with pad. So we configure these pins as internal pull-down
at default to prevent leakage current due to floating.
GPIOH7:
On IT81202/IT81302, the GPIOH7 isn't bonding with pad and is left
floating internally. We need to enable internal pull-down for the pin
to prevent leakage current, but IT81202/IT81302 doesn't have the
capability to pull it down. We can only set it as output low,
so we enable output low for it at initialization to prevent leakage.
After setting: power saving=2.26mA
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
Code removed:
- IT8XXX2 doesn't support soc level software interrupt hence remove
them.
- To use common macro to access csr (control status register).
- To remove CONFIG_RISCV_HAS_PLIC related code. IT8XXX2 uses its own
interrupt controller code.
- To remove ite_write and ite_read. We don't use them anymore.
Code changed:
- Return true from arch_irq_is_enabled() when external interrupt-enable
bit, and SOC's IER are both true.
Signed-off-by: Dino Li <Dino.Li@ite.com.tw>
Fixes: #38591, #38207, #37861
The commit 65a2de84a9 aligned the data
linker symbol for sections and regions.
The data region symbol start has been placed outside the sections thus
being defined as the address of the region before alignment of the first
section in the data region, usually the `datas` section.
The symbol defining the start address of the data section is after
section alignment.
In most cases the address of the data region start and datas section
start will be identical, but not always.
The data region symbol is a new linker symbol and existing code has
been depending on the old data section start symbol.
Thus, the update to the use of the data region start symbol instead of
data ram start symbol thus results in a different address when the
section is aligned to a different address.
To ensure the original behavior in all cases, the data region start
address is now moved inside the data section.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Call __reset instead of directly calling __initialize from the common
RISC-V privileged SoC vectors __start. This allows injection of SoC
specific reset code just after setting up the machine trap vector.
RISC-V privilege SoCs without the need for custom reset code can set
CONFIG_INCLUDE_RESET_VECTOR=y to include a __reset stub which simply
calls __initialize.
Fixes: #38396
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Setting this bit will wake up CPU if it is in low power mode
and an interrupt is pending.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
This patch adds support for SiFive Freedom U740 SoC.
First version is minimum only using UART, SPI and L2-LIM area.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
This patch adds support for SiFive Freedom U540 SoC.
First version is minimum only using UART, SPI and DDR memory area.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
The free run timer will be used to count before entering hibernate
mode. Move the related registers to the head file for accessing.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
PR #37938 aligns many linker symbols name like rom/rodata_regions ...,
but ae350 soc linker script doesn't update for that. Migrate all linker
symbols name to PR #37938 changes.
Signed-off-by: Jim Shu <cwshu@andestech.com>
This initial support of L2C driver only contains cache enable and HW
capability checking. Cache management operation isn't supported yet
in this driver.
Signed-off-by: Jim Shu <cwshu@andestech.com>
Andes V5 PMA can let SW programmably configure memory attribute of
physical memory region. This commit enable CONFIG_NOCACHE_MEMORY of
Andes V5 CPUs based on the PMA. Use PMA region 0 to set whole nocache
section as uncached memory.
Signed-off-by: Jim Shu <cwshu@andestech.com>
Support custom RISC-V CSR context switch for Andes V5 CPUs.
Both AndeStar V5 DSP and PowerBrake features have it's own CSR to be
saved for thread and ISR context, so adding these CSRs into the RISC-V
SOC context management framework (CONFIG_RISCV_SOC_CONTEXT_SAVE).
Signed-off-by: Jim Shu <cwshu@andestech.com>
Add andes_v5 SoC series and andes_ae350 SoC. It includes
soc initialization code, linker script, and custom CSR encoding.
Signed-off-by: Jim Shu <cwshu@andestech.com>
Cleanup and preparation commit for linker script generator.
Zephyr linker scripts provides start and end symbols for each larger
areas in the linker script.
The symbols _image_text_start and _image_text_end sometimes includes
linker/kobject-text.ld. This mean there must be both the regular
__text_start and __text_end symbols for the pure text section, as well
as <group>_start and <group>_end symbols.
The symbols describing the text region which covers more than just the
text section itself will thus be changed to:
_image_text_start -> __text_region_start
_image_text_end -> __text_region_end
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Cleanup and preparation commit for linker script generator.
Zephyr linker scripts provides start and end symbols for each larger
areas in the linker script.
The symbols _image_rom_start and _image_rom_end corresponds to the group
ROMABLE_REGION defined in the ld linker scripts.
The symbols _image_rodata_start and _image_rodata_end is not placed as
independent group but covers common-rom.ld, thread-local-storage.ld,
kobject-rom.ld and snippets-rodata.ld.
This commit align those names and prepares for generation of groups in
linker scripts.
The symbols describing the ROMABLE_REGION will be renamed to:
_image_rom_start -> __rom_region_start
_image_rom_end -> __rom_region_end
The rodata will also use the group symbol notation as:
_image_rodata_start -> __rodata_region_start
_image_rodata_end -> __rodata_region_end
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Cleanup and preparation commit for linker script generator.
Zephyr linker scripts provides start and end symbols for each section,
and sometimes even size and LMA start symbols.
Generally, start and end symbols uses the following pattern, as:
Section name: foo
Section start symbol: __foo_start
Section end symbol: __foo_end
However, this pattern is not followed consistently.
To allow for linker script generation and ensure consistent naming of
symbols then the following pattern is introduced consistently to allow
for cleaner linker script generation.
Section name: foo
Section start symbol: __foo_start
Section end symbol: __foo_end
Section size symbol: __foo_size
Section LMA start symbol: __foo_load_start
This commit aligns the symbols for _data_ram/rom to other symbols and in
such a way they follow consistent pattern which allows for linker script
and scatter file generation.
The symbols are named according to the section name they describe.
Section name is `data`
A new group named data_region is introduced which instead spans all the
input and output sections that was previously covered by
__data_ram_start, __data_ram_end, and __data_rom_start.
The following symbols are aligned in this commit:
- __data_ram_start -> __data_region_start
- __data_ram_end -> __data_region_end
- __data_rom_start -> __data_region_load_start
The following new symbols are introduced so that the data section is
aligned with other sections:
- __data_end
- __data_start
value identical to __data_region_start but describes start of
the section.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Define soc_interrupt_init as a weak symbol in the common RISC-V
privileged instruction set SoC support.
This allows overriding soc_interrupt_init for SoCs which are not fully
compliant with the RISC-V privileged specification.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Define __soc_handle_irq as a weak symbol in the common RISC-V privileged
instruction set SoC support.
This allows overriding __soc_handle_irq for SoCs which are not fully
compliant with the RISC-V privileged specification.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
esp32c3 has already supported RISC-V GP, just apply new kconfig option
to it. Forcely select CONFIG_RISCV_GP in esp32c3 at first because it
seems to be necessary in the esp32c3 SoC.
Signed-off-by: Jim Shu <cwshu@andestech.com>
Add norelax option before initializing GP at common entry point.
Remove __global_pointer$ symbol in the SoC linker script because it's
in the arch one. Remove -mno-relax when GP support is enabled.
Signed-off-by: Jim Shu <cwshu@andestech.com>
Initialize GP at common entry point of riscv-privilege SoCs so that
this commit add GP support of these SoCs at once.
As some privilege SoCs want to customize the entry point, they should
disable linker relaxation by `.norelax option` before entrying the
common entry point `__start`.
Signed-off-by: Jim Shu <cwshu@andestech.com>
Creating static libraries for drivers moves some symbols out of IRAM.
This change fixes it.
Signed-off-by: Shubham Kulkarni <shubham.kulkarni@espressif.com>
The delay will ensure last byte has been latched in before
This also change the method of reading status register from re-send
read status command on each read to read status register continuously.
Signed-off-by: Dino Li <Dino.Li@ite.com.tw>
log and libc optimization default config are soc related
and should be moved out from board context.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
This reverts commit 7b09d031fa. Because
context save of GP register is removed, we don't need to initialize GP
at thread init. GP will be a constant value so that it could only be
initialized at program start.
Signed-off-by: Jim Shu <cwshu@andestech.com>
Current location options for linker source files includes init and
noinit ram data, but only a noinit ram section. This makes it impossible
for application code to define an initialized RAM output section,
such as with the Z_ITERABLE_SECTION_RAM() helpers.
Adding a DATA_SECTIONS linker source option for this use case.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
esp32c3 SoC is an rv32imc, so it does not support the atomic builtin.
Since it relies in atomic instructions.
Signed-off-by: Felipe Neves <felipe.neves@espressif.com>
based on uart rom functions, also enable console driver
on top if this driver enabling logging
Signed-off-by: Felipe Neves <felipe.neves@espressif.com>
Create a shared macro to access the pinctrl_0 property. The pinctrl_0
property includes pinmux phandle, pin and alternate function.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
it8xxx2 supports 'm', 'a', and 'c' extensions.
Enable them to save flash space and also improve
latency of fetching code from flash.
Signed-off-by: Dino Li <Dino.Li@ite.com.tw>
Correct SYS_CLOCK_HW_CYCLES_PER_SEC and
SYS_CLOCK_TICKS_PER_SEC to match our real setting value
for precise timing.
Signed-off-by: Ruibin Chang <ruibin.chang@ite.com.tw>
Save ra to caller saved register is wrong because it might get
overwritten after another function is called, so we fix this.
Remove clear mip register operation. (it8xxx2 supports machine-mode
only, and MEIP bit of mip is read-only).
Signed-off-by: Dino Li <Dino.Li@ite.com.tw>
For esp32c3 related ROM located functions instead
of esp32c3_rom.
Signed-off-by: Felipe Neves <ryukokki.felipe@gmail.com>
Signed-off-by: Felipe Neves <felipe.neves@espressif.com>
The _PrepC() function is the standard risc-v way
of zephyr entry point, so let it call the z_cstart instead
of calling this function directly.
Signed-off-by: Felipe Neves <ryukokki.felipe@gmail.com>
Signed-off-by: Felipe Neves <felipe.neves@espressif.com>
replaces the plain memcpy to zero the bss with
the standard zephyr function that does this task.
Signed-off-by: Felipe Neves <ryukokki.felipe@gmail.com>
Signed-off-by: Felipe Neves <felipe.neves@espressif.com>
Plus added implementation for esp32c3 SoC.
Signed-off-by: Felipe Neves <ryukokki.felipe@gmail.com>
Signed-off-by: Felipe Neves <felipe.neves@espressif.com>
by adding the soc specific files such: soc initialization code,
linker scripts and support for esp32c3 devkitm
Signed-off-by: Felipe Neves <ryukokki.felipe@gmail.com>
Signed-off-by: Felipe Neves <felipe.neves@espressif.com>
rv32m1_vega don't boot due to device init ordering and changes with the
device model. The soc code is looking for a device pointer for the
intmux. Change to using DEVICE_DT_GET here as that will ensure we get
a valid pointer and by the time we need to utilize the pointer the
intmux driver will have been initialized and thus the device pointer
will be ready.
Also set BUILD_OUTPUT_HEX since we utilize openocd to flash and west
flash is looking for a hex file for openocd targets.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add flash driver for it8xxx2. The driver can implement
flash read, write and erase that will be mapped to the
ram section for executing.
TEST="flash write 0x80000 0x10 0x20 0x30 0x40 ..."
"flash read 0x80000 0x100"
"flash erase 0x80000 0x1000"
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
Adding support for beagleV Starlight board based on Starfive JH7100
SoC. It's a base support, no drivers other than uart has been tested.
Signed-off-by: Rajnesh Kanwal <rajnesh.kanwal49@gmail.com>
Create the pinmux phandle to the ADC driver node in the
devicetree. When the pinmux_pin_set function in
adc_it8xxx2_channel_setup can refer to the setting of
this phandle. It is more flexible to use.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
This commit fixes the ADC driver flow. And add internal
reference voltage to ADC driver API. And correct the
data buffer that only need to store raw data.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
We need to clear interrupt status, before we enable the interrupt.
So I let ite_intc_isr_clear() to be global function.
Signed-off-by: Ruibin Chang <ruibin.chang@ite.com.tw>
Add register address including external timer and watchdog(ETWD),
general control(GCTRL), serial peripheral interface(SPI).
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
This change enables A, C, D, E, G, H, I, J, K, and L groups,
and fix gpio interrupt function.
This change also pull (and rename) dt-bindings/irq.h to
dt-bindings/interrupt-controller/ite-intc.h, because it is
chip-specific.
Signed-off-by: Dino Li <Dino.Li@ite.com.tw>
Change-Id: Ifee039981c2cc4cf5980e663702a9921e629fc1e
This commit is about the it8xxx2 analog to digital converter
driver. Support 8 channels ch0~ch7 and 10-bit resolution.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
This patch adds weak sys_arch_reboot() function to avoid build error
with CONFIG_REBOOT=y. Some SoC has already had own reboot function
but others (Ex. qemu boards) faced buld error.
- openisa_rv32m1: Not change
- riscv-ite: Do nothing, remove and use arch/riscv function
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Add a simple pinctrl node for the IOF registers under the GPIO
controller node to be used by the pinmux driver.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The default frequency for this board in Renode is 66 MHz. This needs to
be even with `SYS_CLOCK_HW_CYCLES_PER_SEC` to avoid such problems as in
the #31726 issue.
Unfortunately, the difference in these values was helpful for some tests
that are failing with 66 MHz set in both places. It created artificial
boost in certain circumstances.
The frequencies in the default Renode platform description (`.repl`)
file for MI-V were overridden with 4 MHz value that seems to be better
tolerated based on testing. The `SYS_CLOCK_HW_CYCLES_PER_SEC` was
adjusted as well.
To solve the rest of the issues, `cpu PerformanceInMips` was set to 4.
It seems tests are completed faster with such a value.
This commit fixes#31726.
Signed-off-by: Adam Jeliński <ajelinski@antmicro.com>
The QEMU RISC-V VirtIO board is capable:
- 8 x CPU
- 256 MiB RAM
- PMP
- PCI
- ISA string: RVnnIMAFDCSU
- mul/div
- FPU with double precision
- MMU
- Compressed instructions
Devicetree was extracted from QEMU as described in virt.dtsi.
The same .dtsi SOC description is used for 32-bit and 64-bit.
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
This commit is about the it8xxx2 i2c master driver which
includes six SMBus channels. The enhanced channel i2c3,
i2c4, i2c5 are controller which are designed to support
the I2C protocol.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
The IRQ handler has had a major changes to manage syscall, reschedule
and interrupt from user thread and stack guard.
Add userspace support:
- Use a global variable to know if the current execution is user or
machine. The location of this variable is read only for all user
thread and read/write for kernel thread.
- Memory shared is supported.
- Use dynamic allocation to optimize PMP slot usage. If the area size
is a power of 2, only one PMP slot is used, else 2 are used.
Add stack guard support:
- Use MPRV bit to force PMP rules to machine mode execution.
- IRQ stack have a locked stack guard to avoid re-write PMP
configuration registers for each interruption and then win some
cycle.
- The IRQ stack is used as "temporary" stack at the beginning of IRQ
handler to save current ESF. That avoid to trigger write fault on
thread stack during store ESF which that call IRQ handler to
infinity.
- A stack guard is also setup for privileged stack of a user thread.
Thread:
- A PMP setup is specific to each thread. PMP setup are saved in each
thread structure to improve reschedule performance.
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: Nicolas Royer <nroyer@baylibre.com>
Adds the necessary bits to initialize TLS in the stack
area and sets up CPU registers during context switch.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Do not assume `reg_size` to be a multiple of 4 and
divide it on each call, expect the caller to provide
an already divided value instead.
This change require the LiteX GPIO driver to be modified,
which will come in the following commit.
Signed-off-by: Pawel Czarnecki <pczarnecki@internships.antmicro.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
unify how XIP is configured across architectures. Use imply instead of
setting defaults per architecture and imply XIP on riscv arch and remove
XIP configuration from individual defconfig files to match other
architectures.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The optional SOC_CONTEXT carries processor state registers that need to
be initialized properly to avoid uninitialized memory read as processor
state.
In particular on the RV32M1 the extra soc context stores a state for
special loop instructions, and loading non zero values will have the
core assume it is in a loop.
Signed-off-by: Karsten Koenig <karsten.koenig.030@gmail.com>
Saving an extended context for RV32M1 should be optional, but it was
broken due to the offset calculation not taking the according option
into account.
Signed-off-by: Karsten Koenig <karsten.koenig.030@gmail.com>
The `TEXT_SECTION_OFFSET` symbol is used to specify the offset between
the beginning of the ROM area and the address of the first ROM section.
This commit renames `TEXT_SECTION_OFFSET` to `ROM_START_OFFSET` because
the first ROM section is not always the `.text` section.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Remove Kconfig, linker script, and related bits associated with
CUSTOM_RODATA_LD, CUSTOM_RWDATA_LD, CUSTOM_SECTIONS_LD,
SOC_NOINIT_LD, SOC_RODATA_LD, and SOC_RWDATA_LD options that have been
deprecated since Zephyr 2.2.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This adds a helper function for reading LiteX 64-bit CSRs
to be used by LiteX drivers.
Signed-off-by: Jakub Cebulski <jcebulski@internships.antmicro.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
Several reviewers agreed that DT_HAS_NODE_STATUS_OKAY(...) was an
undesirable API for the following reasons:
- it's inconsistent with the rest of the DT_NODE_HAS_FOO names
- DT_NODE_HAS_FOO_BAR_BAZ(node) was agreed upon as a shorthand
for macros which are equivalent to
DT_NODE_HAS_FOO(node) && DT_NODE_HAS_BAR(node) &&
- DT_NODE_HAS_BAZ(node), and DT_HAS_NODE_STATUS_OKAY is an odd duck
- DT_NODE_HAS_STATUS(..., okay) was viewed as more readable anyway
- it is seen as a somewhat aesthetically challenged name
Replace all users with DT_NODE_HAS_STATUS(..., okay), which is
semantically equivalent.
This is mostly done with sed, but a few remaining cases were done by
hand, along with whitespace, docs, and comment changes. These special
cases include the Nordic SOC static assert files.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Rename DT_HAS_NODE to DT_HAS_NODE_STATUS_OKAY so the semantics are
clear. As going forward DT_HAS_NODE will report if a NODE exists
regardless of its status.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert DT_CODE_PARTITION_{OFFSET,SIZE} to use new
DT_REG_ADDR/DT_REG_SIZE macros instead based on
DT_CHOSEN(zephyr_code_partition).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The riscv linker scripts utilize DT_FLASH_BASE_ADDRESS and
DT_FLASH_SIZE, as we want to phase out the old generator we need to
replace these defines with macros from devicetree.h.
We support two flash configurations at this point, either a QSPI flash
like on the hifive board or a SoC flash like on the rv32m1_vega. We
update the linker scripts to check the compat of the zephyr,flash node
and based on if its 'jedec,spi-nor' or 'soc-nv-flash' we determine how
to extract the "flash" base address and size.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Replace CONFIG_ENTROPY_NAME with DT_CHOSEN_ZEPHYR_ENTROPY_LABEL. We now
set zephyr,entropy in the chosen node of the device tree to the entropy
device.
This allows us to remove CONFIG_ENTROPY_NAME from dts_fixup.h. Also
remove any other stale ENTROPY related defines in dts_fixup.h files.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add a helper macro that will go from a DT_DRV_INST number and return the
clock_ip_name value for that instance.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
As prep for drivers being converted to utilize DT_INST and removal of
per instance Kconfig symbols, move soc.c code to utilize DT_NODELABEL
instead.
Also rename various node labels to match the SoC docs.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add a YAML, DTS node and driver support to utilize data from devicetree
for register address and driver name.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This adds utility functions to irq.h in accordance with zephyr's
multi-level irq numbering schema. Functions that are added will
get the zephyr IRQs level and provide function to return the
interrupt number at a particular level.
Fixes issue #20338
Signed-off-by: Jaron Kelleher <jkelleher@fb.com>
Same deal as in commit eddd98f811 ("kconfig: Replace some single-symbol
'if's with 'depends on'"), for the remaining cases outside defconfig
files. See that commit for an explanation.
Will do the defconfigs separately in case there are any complaints
there.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Same deal as in commit eddd98f ("kconfig: Replace some single-symbol
'if's with 'depends on'"), for all symbols defined within defconfig
files. See that commit for an explanation.
Maybe 'if's were used originally to mirror the 'if's in the main Kconfig
files, and then it got copied around by people assuming 'if' must work
differently from 'depends on'. It doesn't match in every spot at least.
Better to keep it simple and just consistently use 'depends on' when
it's a single symbol/choice I think. Helps reinforce that 'if' isn't
magic too.
Verified by printing all Kconfig menu nodes (symbols, choices, menus,
etc.) before and after the change and diffing (should show no
difference).
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
All board defconfig files currently set the architecture in addition to
the board and the SoC, by setting e.g. CONFIG_ARM=y. This spams up
defconfig files.
CONFIG_<arch> symbols currently being set in configuration files also
means that they are configurable (can be changed in menuconfig and in
configuration files), even though changing the architecture won't work,
since other things get set from -DBOARD=<board>. Many boards also allow
changing the architecture symbols independently from the SoC symbols,
which doesn't make sense.
Get rid of all assignments to CONFIG_<arch> symbols and clean up the
relationships between symbols and the configuration interface, like
this:
1. Remove the choice with the CONFIG_<arch> symbols in arch/Kconfig and
turn the CONFIG_<arch> symbols into invisible
(promptless/nonconfigurable) symbols instead.
Getting rid of the choice allows the symbols to be 'select'ed (choice
symbols don't support 'select').
2. Select the right CONFIG_<arch> symbol from the SOC_SERIES_* symbols.
This makes sense since you know the architecture if you know the SoC.
Put the select on the SOC_* symbol instead for boards that don't have
a SOC_SERIES_*.
3. Remove all assignments to CONFIG_<arch> symbols. The assignments
would generate errors now, since the symbols are promptless.
The change was done by grepping for assignments to CONFIG_<arch>
symbols, finding the SOC_SERIES_* (or SOC_*) symbol being set in the
same defconfig file, and putting a 'select' on it instead.
See
https://github.com/ulfalizer/zephyr/commits/hide-arch-syms-unsquashed
for a split-up version of this commit, which will make it easier to see
how stuff was done. This needs to go in as one commit though.
This change is safer than it might seem re. outstanding PRs, because any
assignment to CONFIG_<arch> symbols generates an error now, making
outdated stuff easy to catch.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This commits adds GPIO driver for LiteX SoC builder.
Due to the fact that GPIO in LiteX is unidirectional and can be
configured with different pins amount per port, additional entries
were added to the dts file.
Signed-off-by: Robert Winkler <rwinkler@internships.antmicro.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
Signed-off-by: Piotr Zierhoffer <pzierhoffer@antmicro.com>
In zephyr_linker_sources().
This is done since the point of the location is to place things at given
offsets. This can only be done consistenly if the linker code is placed
into the _first_ section.
All uses of TEXT_START are replaced with ROM_START.
ROM_START is only supported in some arches, as some arches have several
custom sections before text. These don't currently have ROM_START or
TEXT_START available, but that could be added with a bit of refactoring
in their linker script.
No SORT_KEYs are changed.
This also fixes an error introduced when TEXT_START was added, where
TEXT_SECTION_OFFSET was applied to riscv's common linker.ld instead of
to openisa_rv32m1's specific linker.ld.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
generated_dts_board.h is pretty redundant and confusing as a name. Call
it devicetree.h instead.
dts.h would be another option, but DTS stands for "devicetree source"
and is the source code format, so it's a bit confusing too.
The replacement was done by grepping for 'generated_dts_board' and
'GENERATED_DTS_BOARD'.
Two build diagram and input-output SVG files were updated as well, along
with misc. documentation.
hal_ti, mcuboot, and ci-tools updates are included too, in the west.yml
update.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Enable the driver for the Timer/PWM (TPM) module present in the
OpenISA RV32M1 when PWM is enabled.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Add Kconfig option for indicating that a given SoC contains the
OpenISA RV32M1 Timer/PWM module (TPM).
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
The SRAM address and size are currently available as both
DT_SRAM_{BASE_ADDRESS,SIZE} and as CONFIG_SRAM_{BASE_ADDRESS,SIZE} (via
the Kconfig preprocessor).
Use the CONFIG_SRAM_* versions everywhere, and remove generation of the
DT_SRAM_* versions from gen_defines.py.
The Kconfig symbols currently depend on 'ARC || ARM || NIOS2 || X86'.
Not sure why, so I removed it.
It looks like no configuration files set CONFIG_SRAM_* at the moment, so
another option might be to use the DT_* symbols everywhere instead. Some
Kconfig.defconfig.series files add defaults to them though.
Also improve the help texts for CONFIG_SRAM_* to say that they normally
come from devicetree rather than configuration files.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
miv already had it defined, but let's shorten the names and use
them in the driver. This also adds it for sifive-freedom.
Signed-off-by: Olof Johansson <olof@lixom.net>
This is no longer needed, since all in-tree platforms are only using
the standard mstatus formats. Remove it to avoid the complexity.
Signed-off-by: Olof Johansson <olof@lixom.net>
Before introducing the code for ARM64 (AArch64) we need to relocate the
current ARM code to a new AArch32 sub-directory. For now we can assume
that no code is shared between ARM and ARM64.
There are no functional changes. The code is moved to the new location
and the file paths are fixed to reflect this change.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
to its own linker file snippet so snippets can be placed before it.
Using zephyr_linker_sources().
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
RISCV_RV32M1_VECTOR_BASE_ADDR is unused after commit 34b0516466
("boards: riscv32: rv32m1_vega: enable MCUboot for ri5cy core") (it was
called RISCV32_RV32M1_BASE_ADDR then).
RISCV_RV32M1_VECTOR_SIZE is still used, but is always 0x100, so remove
it too.
These symbols were only defined in a Kconfig.defconfig file.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
USE_CODE_PARTITION is a bit vague as a symbol name ("use code partition
how?"). Rename it to USE_DT_CODE_PARTITION to make it clearer that it's
about devicetree.
This would break any third-party configuration files that set it, but
it'll generate an error since kconfig.py promotes warnings to errors, so
it's probably not a big deal.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
If the user requires an entropy generator to be activated, enable
the SoC TRNG as a source for the entropy.
Signed-off-by: David Leach <david.leach@nxp.com>
Promote the private z_arch_* namespace, which specifies
the interface between the core kernel and the
architecture code, to a new top-level namespace named
arch_*.
This allows our documentation generation to create
online documentation for this set of interfaces,
and this set of interfaces is worth treating in a
more formal way anyway.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Use this short header style in all Kconfig files:
# <description>
# <copyright>
# <license>
...
Also change all <description>s from
# Kconfig[.extension] - Foo-related options
to just
# Foo-related options
It's clear enough that it's about Kconfig.
The <description> cleanup was done with this command, along with some
manual cleanup (big letter at the start, etc.)
git ls-files '*Kconfig*' | \
xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Add SPI driver and bindings for LPSPI peripheral for the RV32M1 SOC.
Based heavily on the existing mcux LPSPI driver.
Signed-off-by: Karsten Koenig <karsten.koenig.030@gmail.com>
Move _LINKER and _ASMLANGUAGE to target.cmake because of how we pick the
linker script that might be used. This way regardless of how or where a
linker.ld gets included we will always set _LINKER & _ASMLANGUAGE (so
any header that needs check based on those defines they can,
specifically generated_dts_board.h)
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Clean up space errors and use a consistent style throughout the Kconfig
files. This makes reading the Kconfig files more distraction-free, helps
with grepping, and encourages the same style getting copied around
everywhere (meaning another pass hopefully won't be needed).
Go for the most common style:
- Indent properties with a single tab, including for choices.
Properties on choices work exactly the same syntactically as
properties on symbols, so not sure how the no-indentation thing
happened.
- Indent help texts with a tab followed by two spaces
- Put a space between 'config' and the symbol name, not a tab. This
also helps when grepping for definitions.
- Do '# A comment' instead of '#A comment'
I tweaked Kconfiglib a bit to find most of the stuff.
Some help texts were reflowed to 79 columns with 'gq' in Vim as well,
though not all, because I was afraid I'd accidentally mess up
formatting.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
SOC_SERIES is already defined with a type in arch/Kconfig, which is
always included.
Trying to get rid of unnecessary "full" symbol definitions in
Kconfig.defconfig files, to make the organization clearer. It can also
help with finding unused symbols.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Add a common definition for NUM_IRQS in arch/arm/core/Kconfig and
arch/riscv/Kconfig. That way, the type doesn't have to be given for
NUM_IRQS in all the Kconfig.defconfig files.
Trying to get rid of unnecessary "full" symbol definitions in
Kconfig.defconfig files, to make the organization clearer. It can also
help with finding unused symbols.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Same deal as in commit 7fdb525754 ("kconfig: Use 'default' instead of
'def_bool' in Kconfig.defconfig files"), but I hacked Kconfiglib to also
find cases where the type is given separately as e.g.
config FOO
int
default 3
Motivation (from a note in
https://docs.zephyrproject.org/latest/guides/kconfig/index.html):
For a symbol defined in multiple locations (e.g., in a
Kconfig.defconfig file in Zephyr), it is best to only give the
symbol type for the "base" definition of the symbol, and to use
'default' (instead of 'def_<type>' value) for the remaining
definitions. That way, if the base definition of the symbol is
removed, the symbol ends up without a type, which generates a
warning that points to the other definitions. That makes the extra
definitions easier to discover and remove.
It's also nice if 'def_bool' and the like turn into a semi-reliable flag
that the symbol is only defined in Kconfig.defconfig files. That might
be a sign that things could be cleaned up.
Will do a separate pass later to remove some symbols only defined in
Kconfig.defconfig files.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Replace:
dt_chosen_reg_addr
dt_chosen_reg_size
dt_node_reg_addr
dt_node_reg_size
with:
dt_chosen_reg_addr_int
dt_chosen_reg_size_int
dt_chosen_reg_addr_hex
dt_chosen_reg_size_hex
dt_node_reg_addr_int
dt_node_reg_size_int
dt_node_reg_addr_hex
dt_node_reg_size_hex
So that we get the proper formatted string for the type of symbol.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Depending on LiteX configuration, CSRs
(control&status registers) might be split
into several consecutive registers.
This introduces common helper functions
for all LiteX drivers providing access
to CSRs for a default LiteX configuration
(data_width = 8bit, bus_width = 32bit).
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
Remove the
# Omit prompt to signify a "hidden" option
comments that appear on some symbols. They seem to have been copy-pasted
at random, as there are lots of promptless symbols that don't have them
(that's confusing in itself, because it might give the idea that the
ones with comments are special in some way).
I suspect those comments wouldn't have helped me much if I didn't know
Kconfig either. There's a lot more Kconfig documentation now too, e.g.
https://docs.zephyrproject.org/latest/guides/kconfig/index.html.
Keep some comments that give more information than the symbol having no
prompt.
Also do some minor drive-by cleanup.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
k_cpu_idle() and k_cpu_atomic_idle() were being directly
implemented by arch code.
Rename these implementations to z_arch_cpu_idle() and
z_arch_cpu_atomic_idle(), and call them from new inline
function definitions in kernel.h.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Various C and Assembly modules
make function calls to z_sys_trace_*. These merely call
corresponding functions sys_trace_*. This commit
is to simplify these by making direct function calls
to the sys_trace_* functions from these modules.
Subsequently, the z_sys_trace_* functions are removed.
Signed-off-by: Mrinal Sen <msen@oticon.com>
Include .gcc_except_table (sub-)sections in linker files to support C++
with exceptions enabled. If these sections are not mapped warnings will
be generated for orphaned sections at link time.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
Convert how we get the various chosen properties like "zephyr,console"
to use the new kconfig functions like dt_chosen_to_label.
Because of how kconfig parses things we define a set of variables of the
form DT_CHOSEN_Z_<PROP> since comma's are parsed as field seperators in
macros.
This conversion allows us to remove code in gen_defines.py for the
following chosen properties:
zephyr,console
zephyr,shell-uart
zephyr,bt-uart
zephyr,uart-pipe
zephyr,bt-mon-uart
zephyr,uart-mcumgr
zephyr,bt-c2h-uart
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Utilize the multi-level irq infrastructure and replace custom handling
for PLIC on riscv-privilege SoCs. The old code offset IRQs in drivers
and various places with RISCV_MAX_GENERIC_IRQ. Instead utilize Zephyr's
encoded IRQ and replace offsets in drivers with the IRQ define from DTS.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
There are two aspects to this: CPU registers are twice as big, and the
load and store instructions must use the 'd' suffix instead of the 'w'
one. To abstract register differences, we simply use a ulong_t instead
of u32_t given that RISC-V is either ILP32 or LP64. And the relevant
lw/sw instructions are replaced by LR/SR (load/store register) that get
defined as either lw/sw or ld/sd. Finally a few constants to deal with
register offsets are also provided.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
With the upcoming riscv64 support, it is best to use "riscv" as the
subdirectory name and common symbols as riscv32 and riscv64 support
code is almost identical. Then later decide whether 32-bit or 64-bit
compilation is wanted.
Redirects for the web documentation are also included.
Then zephyrbot complained about this:
"
New files added that are not covered in CODEOWNERS:
dts/riscv/microsemi-miv.dtsi
dts/riscv/riscv32-fe310.dtsi
Please add one or more entries in the CODEOWNERS file to cover
those files
"
So I assigned them to those who created them. Feel free to readjust
as necessary.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
