Cleanup around COND_CODE_1 usage and replacing with
IF_ENABLED if applicable.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Uses the generated device tree macros, DT_NXP_LPC_USART_USART_*, in the
mcux flexcomm driver and removes the now unused dts fixups from the
lpc54xxx and lpc55xxx socs.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Renames the lpc usart shim driver to more accurately reflect the
flexcomm hardware IP and to prepare for instantiating it on an SoC
outside the LPC family.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Remove leading/trailing blank lines in .c, .h, .py, .rst, .yml, and
.yaml files.
Will avoid failures with the new CI test in
https://github.com/zephyrproject-rtos/ci-tools/pull/112, though it only
checks changed files.
Move the 'target-notes' target in boards/xtensa/odroid_go/doc/index.rst
to get rid of the trailing blank line there. It was probably misplaced.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though.
Also replace some
config
prompt "foo"
bool/int
with the more common shorthand
config
bool/int "foo"
See the 'Style recommendations and shorthands' section in
https://docs.zephyrproject.org/latest/guides/kconfig/index.html.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Add clearing error event to UART and UARTE drivers.
Without it driver goes into infinite interrupt loop.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
This patch tests the return code when calling clock_control_get_rate
and completes the issue #20503 seen on watchdog
[Coverity CID :205655]
Fixes#20503
Signed-off-by: Francois Ramu <francois.ramu@st.com>
There is possibility that endrx interrupt will be triggered in the
middle of timer interrupt responsible for UARTE timeout, this
patch handles this case.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
Update calls to nrfx HAL functions to reflect API changes introduced in
nrfx 2.0.0. All these functions are now called with the first parameter
pointing to the structure of registers of the relevant peripheral.
Also a few functions got renamed:
- nrf_gpiote_int_is_enabled to nrf_gpiote_int_enable_check
- nrf_gpiote_event_is_set to nrf_gpiote_event_check
- nrf_rng_event_get to nrf_rng_event_check
- nrf_rng_int_get to nrf_rng_int_enable_check
- nrf_rtc_event_pending to nrf_rtc_event_check
- nrf_rtc_int_is_enabled to nrf_rtc_int_enable_check
- nrf_timer_cc_read to nrf_timer_cc_get
- nrf_timer_cc_write to nrf_timer_cc_set
Default configuration values were removed from nrfx_config files,
so the drivers pwm_nrfx and spi_nrfx_spis no longer can use those.
Function nrfx_pwm_init() now takes one more parameter - context pointer
that is passed to the event handler, not used in the pwm_nrfx driver.
HALs for UART and UARTE now allow configuration of the parity type
and the number of stop bits, for SoCs that provide the corresponding
registers.
Signed-off-by: Karol Lasończyk <karol.lasonczyk@nordicsemi.no>
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Several macros were documented as deprecated but lacked the
infrastructure to produce deprecation warnings. Add the deprecation
marker, and fix the in-tree references to the deprecated spellings.
Note that one non-deprecated macro should have been deprecated, and
is, referring to a newly added line control bit.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
The SAME5x/SAMD5x MCUs share their SERCOM peripherals with the
samd2x and saml1x MCUs with only few registers changed.
Signed-off-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Use this short header style in all Kconfig files:
# <description>
# <copyright>
# <license>
...
Also change all <description>s from
# Kconfig[.extension] - Foo-related options
to just
# Foo-related options
It's clear enough that it's about Kconfig.
The <description> cleanup was done with this command, along with some
manual cleanup (big letter at the start, etc.)
git ls-files '*Kconfig*' | \
xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Added in commit f9efca4b4f ("boards: riscv32: add LiteX VexRiscV
board"), then never used.
Found with a script.
Also change UART_LITEUART from a 'menuconfig' symbol to a 'config'
symbol, as it's no longer followed by symbols that depend on it
(UART_LITEUART_PORT_0 should have been a plain 'config' too).
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
In some applications where power management is used, it is not expected
that the GPIO pins of the UARTE is reconfigured upon power state change.
Added a Kconfig option to disable the UARTE driver management of GPIOs.
It defaults to y in order to not affect current behavior unless the user
configures it specifically.
Signed-off-by: Dennis Wildmark <dennis.wildmark@assaabloy.com>
Defining a symbol with 'menuconfig' just tells the menuconfig to display
any dependent symbols that immediately follow it in a separate menu.
'menuconfig' has no effect on symbol values.
Making a symbol that doesn't have any dependent symbols after it a
'menuconfig' should be avoided, because then you end up with an empty
menu, which is shown as e.g.
[*] Enable foo ---
This is how it would be shown if there were children but they all
happened to be invisible as well.
With a regular 'config', it turns into
[*] Enable foo
Change all pointless 'menuconfig's to 'config's.
See the section on 'menuconfig' on the Kconfig - Tips and Best Practices
page as well.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Use the base address from the device tree for instance 0 (LPUART0)
instead of hardcoding the address using the NXP MCUX HAL definition.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
The driver is not specific to 32bit ARM family. For example it is
currently used by the QEMU ARM64 virt machine.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
This commit switches from using device tree automatically
generated address-based defines to the instance id-based ones.
Without this change it is not be possible to re-use the driver
on boards where the device is located at different location
than 0xe0001800.
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
Currently both uart_stm32_irq_tx_complete() and
uart_stm32_irq_tx_ready() return the TXE flag. However
uart_irq_tx_complete() should really return the TC flag to output true
"Transmit Complete" status.
Signed-off-by: Tommy Vestermark <tovsurf@vestermark.dk>
The driver fails to compile when CONFIG_UART_INTERRUPT_DRIVEN=n. This is
due to a nested ifdef on CONFIG_UART_INTERRUPT_DRIVEN that is excluding
pieces of code unrelated to the uart interrupts management.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
The PL011 driver is not specific to the cortex_m arch and the driver
does not really use anything from the cmsis header file. Remove it.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Use the int_literal_to_timeout Coccinelle script to convert literal
integer arguments for kernel API timeout parameters to the standard
timeout value representations.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The new SDK version 2.6.3 for LPC55S69 changes how CLOCK_GetFreq works.
Change to use CLOCK_GetFlexCommClkFreq which can work on both the old
and new SDK.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Use the device tree to assign the correct peripheral clock to each
UART/USART/LEUART. Previously, the clock identifier was determined
through the sequence number of the instantiated UART. This meant
configuring all UARTs when only one of the later UARTs was required.
Signed-off-by: Oane Kingma <o.kingma@interay.com>
We need to change the order of inclusions in
uart_mcux_lpuart.c, to avoid build errors. This
is required since the driver structures contain
a field named DATA, which is also a macro defined
in the linker script.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
nrf52840 and nrf9160 have possible configuration of two stop bits
for UART and UARTE, this commit adds handling of it to driver.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
A commit that organizes the soc.h header of NXP SoCs:
- removing redundant inclusions of sys/util.h
- removing inclusions of device.h and kernel_includes.h
- including the auto-generated DTS board header
- including the fsl_common.h header
- fixing minor style issues
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The semi-automated API changes weren't checkpatch aware. Fix up
whitespace warnings that snuck into the previous patches. Really this
should be squashed, but that's somewhat difficult given the structure
of the series.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
These calls are buildable on common sanitycheck platforms, but are not
invoked at runtime in any tests accessible to CI. The changes are
mostly mechanical, so the risk is low, but this commit is separated
from the main API change to allow for more careful review.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
- dts updated for UART1/2
- Additional check added to _INIT macro to configure flow control mode
- Additional check added to _INIT macro to set CTS/RTS gpios values
- Additional check added for gpio config
Signed-off-by: Mohamed ElShahawi <ExtremeGTX@hotmail.com>
- Fixes#3981
- Implement UART Polling functions
- Implement UART Interrupt APIs
- Remove dependency on esp32_rom_uart_xxx functions
- Update Device tree with UART addresses and pin config
- Update ESP32 UART KConfig
Notes about implementation:
- Interrupts now defined as a local macros, and should be removed
later on, when interrupts for esp32 are supported in dts
- Threshold interrupts are used for TX/RX
- Reseting FIFOs using _RST bit will corrupt FIFO of UART2 when used for
UART1 and vice-versa, so a generic way is used for all three UARTs
- Old Silicon rev is not supported
Signed-off-by: Mohamed ElShahawi <ExtremeGTX@hotmail.com>
Utilize the multi-level irq infrastructure and replace custom handling
for PLIC on riscv-privilege SoCs. The old code offset IRQs in drivers
and various places with RISCV_MAX_GENERIC_IRQ. Instead utilize Zephyr's
encoded IRQ and replace offsets in drivers with the IRQ define from DTS.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Configure pins before enabling and after disabling UARTE through
power management functions.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
Ensure that two routines won't interfere with eachother.
In current situation there is possibility that ENDRX will be called
during rx_timeout routine or vice-versa which will result in wrong
offset and length passed to user.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
Due to longer than expected user callback handling, rx byte counting
got out of sync with real values. It leads to incorrect values
reported to user. This fix adds sync point at the end of buffer.
When using hardware rx counting this issue should not occur.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
In some hardware,e.g. ARC HS Development kit,the
peripheral space of ns16550 only allowes WORD
access, byte acess will raise bus error.
This commit adds support for this case
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Add support for virtual UART device that uses Segger RTT channels
for data transfers. Due to the RTT principle, this driver supports
only polling API.
Signed-off-by: Pavel Kral <pavel.kral@omsquare.com>
