On TF-M platforms the PSA_WANT_xxx above do not enable the legacy
MBEDTLS_ECP_C build symbol which is required to enable the
mbedtls_pk_ec() function used in uOSCORE/uEDHOC.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Bring in the following changes from the rust module:
dd73abc242e zephyr: work: Allow struct to have a additional fields
898662c0889 zephyr-sys: Handle deflected GPIO constants
174ded53bd6 ci-manifest.yml: Add cmsis_6
This should fix CI for Rust. In addition, the allowing struct to have
addition fields should unblock #88345.
Signed-off-by: David Brown <david.brown@linaro.org>
Check if the actual velocity pointer is NULL or not, if its null return
-EINVAL in order to avoid null pointer dereferencing later in code
Signed-off-by: Jilay Pandya <jilay.pandya@outlook.com>
This commit resolves incorrect results in the interface status response.
The parameter for `sl_wifi_get_wireless_info` has changed following the
HAL Silabs update to version 3.5.0.
In AP mode, the implementation now correctly uses the `mac_address`
variable instead of `bssid`.
Signed-off-by: Arunmani Alagarsamy <arunmani.a@silabs.com>
Power save is not supported in AP mode. This commit ensures that
`-EINVAL` is returned instead of success, preventing incorrect behavior.
Signed-off-by: Arunmani Alagarsamy <arunmani.a@silabs.com>
Commit `2844850` inadvertently omitted
`SL_SI91X_CUSTOM_FEAT_SOC_CLK_CONFIG_160MHZ`. This commit restores
the missing flag to ensure proper SOC clock setup.
Additionally, `SL_SI91X_CUSTOM_FEAT_LIMIT_PACKETS_PER_STA` is now enabled
as the default setting, aligning with the driver Kconfig.
Signed-off-by: Arunmani Alagarsamy <arunmani.a@silabs.com>
Add a dts overlay file for the STM32F4-DISCO to enable ADC ch testing
with the adc_api test.
Signed-off-by: Ajith Anandhan <ajithanandhan0406@gmail.com>
Add a board-specif dts overlay file for the adc_dt sample on the
STM32F4-DISCO board to enable for ADC channel support.
Signed-off-by: Ajith Anandhan <ajithanandhan0406@gmail.com>
At runtime, `cbprintf` outputs a warning of the type check of the
print format.
Added a cast to avoid this warning to the first argument of
`device_map()` to `void*`.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
CONF_FILE parameter in testcase.yaml overwrites board
specific configurations. Change it to EXTRA_CONF_FILE
to apply both configurations.
Signed-off-by: Michał Stasiak <michal.stasiak@nordicsemi.no>
Adds support for the M5Stack Fire. Board files are adapted from those
used for the M5Stack Core2.
Aside from the 2 newest revisions the device also contains a BMM150
magnetometer which is not supported.
The LED strips on the sides are also not supported because Zephyr
does not support fast GPIO switching, see: #11917.
The IP5306 charger works by itself but doesn't have a driver written for
it thus it's not able to be interfaced with.
Signed-off-by: Jakub Novák <jakubnovak.cz@outlook.cz>
Add resolving the requested clock spec and getting the startup time
of the clock for given clock spec to the nordic specific
clock_control sample.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
Introduce get_startup_time API which allows users to request
clocks specs to be met in time for an event.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
Introduce API which allows users to determine what the actual
minimum spec will be resulting from a requested minimum spec. This
is useful for optimizing code as the requested minimum may be
way worse than what will actually be applied.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
Add minimal support for Renesas RZ/V2H-EVK M33 core
Signed-off-by: Tien Nguyen <tien.nguyen.zg@renesas.com>
Signed-off-by: Quang Le <quang.le.eb@bp.renesas.com>
Add devicetree to support for Renesas RZ/V2H M33 core
Signed-off-by: Tien Nguyen <tien.nguyen.zg@renesas.com>
Signed-off-by: Quang Le <quang.le.eb@bp.renesas.com>
In the commit 573a712bed patch "arm64:
reset: disable cache and MMU for safety", it disables D-Cache and MMU
for safety, but in some cases, for example the code is loaded into memory
by hardware debugger, we need to flush D-Cache before disable it in
order to make sure the data is coherent in the system, otherwise it
will report "Synchronous Abort" when D-Cache is disabled.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
This reverts commit 573a712bed.
The original patch disable cache and MMU, but in some cases, for example
the code is loaded into memory by hardware debugger, we need to flush
D-Cache before disable it in order to make sure the data is coherent
in the system, otherwise it will report "Synchronous Abort" when D-Cache
is disabled.
This patch revert the old one and the following patch will flush
the cache before disable it.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Added new configuration item to optionally enable APIs for operation
all data cache, by default these APIs are disabled.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
In order to clean and invalidate all D-Cache, so reverts commit:
867ba172b4.
Although no software broadcast between different CPU Cores for D-Cache
maintaining operation, but the hardware bus system should make sure it
is safety for all CPU Cores, because it is common for other SMP OS.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Add driver for the microchip MCP3561/2/4R ADC. Registers lock and
CRCCFG protection mecanism is not implemented. Tested on an MCP3564R.
Signed-off-by: Johan Lafon <johan.lafon@syslinbit.com>
Add Variscite VAR-SOM-MX93 board support. This SoM is based on NXP's
i.MX93 SoC. It includes Cortex-A55 and Cortex-M33 support.
Signed-off-by: Andre Morishita <andre.m@variscite.com>
