U-blox SARA-R4 already exists but the behavior is different,
requiring a separate driver instance. For instance, R5 autostarts,
so this commit also adds support for skipping power on pulse.
Signed-off-by: Emil Lindqvist <emil@lindq.gr>
Suspend the RNG module when the pool is full to save power. The
generated numbers aren't used anyway.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
GCLK Gen 2 was dedicated to USB, but never setup... this patch
configures it for 48 MHz, derrived from DFLL.
Signed-off-by: Attie Grande <attie.grande@argentum-systems.co.uk>
When there'is no phy at the address both registers will return
0xFFFF, giving a phy address of UINT32_MAX, not 0x00FFFFFF.
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
The bit check field is redundant since the callback struct is masked to
a single pin already. Drop it, simplify the code a bit.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Use the same ret variable name as the rest of the file, drop a redundant
mask, use gpio_pin_interrupt_configure_dt.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Test consistently fails with timeout for board `hifive1`, so exclude
this board until fixed.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
This board have an NXP MPU with 8 configurable regions, of which five
of them are already used by the static MPU configuration. Many of
these tests are failing due to lack of MPU regions or free partition
slots available, even when HW stack protection is disabled when
building with userspace support.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
- Misc fixes to improperly documented structs
- Show all PD and SC API in docs
- Document enums
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Change fixes marcos used to determine if argument types allow simplified
message creation mode. Both arguments types must be proper.
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
This enables the sqrt() and sqrtf() tests also in case of soft-float
configurations. It is expected that the tests will link, run and pass
also in such configuration.
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
Fixing typo from the original implementation in
44705b698c725166834f19d6fd5db2804f9a0d60, which resulted in
the name of current shell instance getting print over and over
again.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Based on stm32wba55, stm32wba55Xg is similar from device tree description
to stm32wba52Xg.
Take the opportunity to fix stm32wba52Xg descriuption scheme which was
missing stm32wba52.dtsi.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Add an example using the macro NET_MGMT_REGISTER_EVENT_HANDLER to the
network management documentation.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
The lib was refactored, but CI didn't run the tests that used it for
some reason.
A parameter was forgotten.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Following changes in #64978, align CPU_HAS_xCACHE symbols with
the CMSIS feature definitions in the device headers so that
both have the same value.
Fixes#66147
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Fixes an issue with the register addresses which was caused by a
missing `ranges;` option for the power peripheral
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Mute the function declaration warning, the compiler was emitting when
compiling the esp32 Wi-Fi driver with IPv4 disabled. The
net_dhcpv4_start() function was visible during compile time, even when
IPv4 was disabled.
Signed-off-by: Marc Lasch <mlasch@mailbox.org>
The 62833 added a regression at SAM ethernet drivers which always fail
to initialize due to a wrong switch case implementation and without
review from maintainer. This add more information and fix the issue.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
A race condition was possible at QEMUHandler which didn't wait for
its harness to complete causing false negatives and test suite
retries, for example when the console harness has got rather
long output from a test application to check for patterns.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Some SoC have missing feature selections in their Kconfig.
Some others are missing includes of CMSIS-Core headers.
Signed-off-by: Wilfried Chauveau <wilfried.chauveau@arm.com>
Caches are optional on cortex-m7, having CPU_HAS_*CACHE in CPU_CORTEX_M7
definition renders them mandatory.
Signed-off-by: Wilfried Chauveau <wilfried.chauveau@arm.com>
This changes remove extraneous includes causing issues with cycles in
includes subsequently having code requiring definitions from CMSIS
while it’s configuration hasn’t completed yet.
Signed-off-by: Wilfried Chauveau <wilfried.chauveau@arm.com>
This change adds checks to validate consistency between Zephyr’s Kconfig
settings and cmsis configuration defined in SiP’s sdk provided headers.
This change also introduces a config to enable cmsis’ own checks which
emits warnings if a parameter relies on auto-populated default values.
Signed-off-by: Wilfried Chauveau <wilfried.chauveau@arm.com>
Kconfig parameters, header’s default & silicon vendor’s SDK configuration
for CMSIS Core, must be consistent. Depending on the inclusion order of
the headers, this is currently not always the case.
This change introduces consistency checks & enusers defaults match their
Kconfig settings.
Signed-off-by: Wilfried Chauveau <wilfried.chauveau@arm.com>
Use the returned reason from the secure fault handle function.
I see no reason why this was ignored, and it is used in the hardfault
handler.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This patch just adds some comments and asserts to clarify the testlibs
att read code.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
This reformats some code on main branch that was not clang formated. The
syntax is changed from initializer list to multiple statements because
there is a conflict in formating requirements between clang format and
checkpatch.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Add the chosen dtcm memory region
for mimxrt1010_evk and mimxrt1015_evk.
To be consistent with other rt10xx platforms.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
When testing k_busy_wait(100), don't require that at least 100µs of CPU
time be consumed by the thread itself; some of that time may be used
elsewhere in the system. Instead, just make sure that at least 80µs is
accounted to the thread and allow 20µs to get used elsewhere.
Signed-off-by: Keith Packard <keithp@keithp.com>
Replace open-coded time conversion with the macro which as that will
usually use a constant divide or multiply.
Signed-off-by: Keith Packard <keithp@keithp.com>
pthread_sigmask() is required by the POSIX_THREADS_BASE
Option Group as detailed in Section E.1 of IEEE-1003.1-2017.
The POSIX_THREADS_BASE Option Group is required for PSE51,
PSE52, PSE53, and PSE54 conformance, and is otherwise mandatory
for any POSIX conforming system as per Section A.2.1.3 of
IEEE-1003-1.2017.
Currently, setting a pthread signal mask has no effect.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
