It's bad form, especially since in that case, it's always the same function
that is called `bt_att_sent()`.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
The Network Connectivity API page is kind of pointless, as it provides
little information (which can be found elsewhere as well) and it was
pointer out that it kind of creates noise in the documentation as it can
be confused with the page which provides a summary of network APIs.
Therefore, remove the page, and move the information from it elsewhere.
The brief summary of what APIs to use was moved the Networking APIs
index page. The information about the samples demonstrating BSD sockets
API usage was moved to the BSD sockets documentation page itself.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Several application protocol libraries documentation missed information
on how can they be enabled (i. e. missed info about associated Kconfig
symbol). This commit fixes it.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
As the display API now check against valid callback functions and
returns -ENOSYS (or equalent), there is no need to provide
such functions in the driver code.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Basically all display drivers implements a few dummy functions that
just returns due to lack of capabilities.
Move that validation to the driver API instead.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Update the release notes and migration guide for CoAP events using
the Network Events subsystem.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
This reverts commit 5227f24815.
The coap observer events will be replaced with net_mgmt events.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
In preparation of migrating to net_mgmt events, we need to remove
the observer event callback handler.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
The default ztest stack size was too small to run new UDP tests on
certain platforms (nrf52840 in this particular case), therefore increase
teh stack size in prj.conf.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Update the Kconfig for the npcx eSPI driver so it's automatically
enabled if the devicetree node is enabled.
Signed-off-by: Keith Short <keithshort@google.com>
The espi_saf.h header has a dependency on the eSPI driver supporing SAF.
Guard the include to fix builds of the Nuvoton eval boards.
Signed-off-by: Keith Short <keithshort@google.com>
Update the Kconfig for the it8xxx2 eSPI driver so it's automatically
enabled if the devicetree node is enabled.
Signed-off-by: Keith Short <keithshort@google.com>
Add code to configure and program Lcu, Trgmux and Emios_Icu IPs to
get the the rotations by the motor in radians.
Co-authored-by: Benjamin Perseghetti <bperseghetti@rudislabs.com>
Co-authored-by: Peter van der Perk <peter.vanderperk@nxp.com>
Co-authored-by: Mayank Mahajan <mayankmahajan.x@nxp.com>
Signed-off-by: Sumit Batra <sumit.batra@nxp.com>
Dynamic command handlers should be fully initialized to avoid undefined
behavior. Also, fix the number of arguments required by each command,
since llext_call_fn requires both the llext and the name of the function
to be called.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
On architectures that have separate data and instruction caches, such as
the Cortex-M7, it is required to flush the reloc changes to the actual RAM
storage before trying to execute any code from the newly loaded llext.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
It is not safe to assume that on entry to llext_load, *ext contains
either NULL or a previous reference to the same ext being loaded. For
example, the shell sample was passing an uninitialized value.
Initialize *ext from a search of the llext by name. If NULL, it is the
first instance of this llext (and on load error, it stays that way). If
not NULL, increment use count and return.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
`pm_device_runtime_get` and `pm_device_runtime_put` have returned `0`
when device runtime PM is not enabled since #56222. Manually checking
the state is no longer required.
Additionally, the functions have been able to run in an ISR context
since #60785, which removed the need to special case `k_is_in_isr()`.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
`pm_device_runtime_get` and `pm_device_runtime_put` have returned `0`
when device runtime PM is not enabled since #56222. Manually checking
the state is no longer required.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Xtensa simulator console should not be enabled when the target is using
winstream console, otherwise we will have multiple definitions of the
same function.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Reinstate the `SHELL_UART_DEFINE` macro and moved the struct
declarations to header file, making it possible to create
another UART shell backend instance by doing
`SHELL_UART_DEFINE()` + `SHELL_DEFINE()` + `shell_init()`.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Add support for OpenOCD runner to the Arduino Giga R1 board. This shares
the same CPU as the STM32H747i Discovery, so that implementation can be
reused.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
A device can be reset before the error code list is communicated
to a LwM2M server so optionally store error list in settings so it
can restored after reset.
Signed-off-by: Nick Ward <nix.ward@gmail.com>
To avoid having "notification scheduled in 0ms" in the log,
check to verify that the delay is not K_NO_WAIT.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Microchip's PolarFire SoC (MPFS) has 186 available interrupts.
Fix the Kconfig symbols.
While we're at at: remove commented out code
Signed-off-by: Conor Paxton <conor.paxton@microchip.com>
Microchip's PolarFire SoC has a total of 9 contexts associated with the
Platform Interrupt controller (PLIC). the E51 core has a single context
(M Mode), and the application processor U54 cores have two each (M mode
and S mode, respectively)
While we are at it, there are a total of 186 interrupts, not 187.
Signed-off-by: Conor Paxton <conor.paxton@microchip.com>
Microchip's PolarFire SoC (device family name: MPFS) is not specific to
the Icicle Kit. Rename the devicetree sources to be more generic and to
align with Linux and allow for other development boards to adopt.
Signed-off-by: Conor Paxton <conor.paxton@microchip.com>
THe CmakeLists file is not neing used to do anything out of the norm.
remove it and add it back in at a later date, if required
Signed-off-by: Conor Paxton <conor.paxton@microchip.com>
Replace combination of printk() to LOG_DBG() to fix the order of the
test execution logs. The printk() is printed immediately, while logs are
buffered, thus the messages from test are printed out before the stack
logs.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This adds the function that sets the available contexts value per
connection object so that API user can set different available contexts
per connection.
The lifetime of such overriden value is the same as connection lifetime,
so on reconnection or device reboot all devices return to having the
same available contexts value again.
Fixes: #64968
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This fixes client lookup that was done with use of bt_conn_index while
the size of the client array is CONFIG_BT_MAX_PAIRED.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Disallow further changes of supported audio contexts characteristic is
the GATT Characteristic Notify Property is not set.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
