Since the driver uses spi_dt_spec there is no need for an explicit
spi_cs_control variable. The variable is unused.
Signed-off-by: Kumar Gala <galak@kernel.org>
Fix the deprecated calls to loading ZephyrUnittest by replacing them
with `Zephyr COMPONENTS unittest`.
Signed-off-by: Yuval Peress <peress@google.com>
Workaround for nRF52 anomalies 102, 106, and 107 was applied also for
SoCs that were not affected with those, namely nRF52811 and nRF52840.
Since the side effect of this workaround is reduction of sensitivity,
this was highly undesirable.
This commit uses dedicated functions provided by MDK for checking if
a given anomaly applies to the used SoC (and its actual revision) so
that the workaround is applied only when it is really needed.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
As with previous commit, make the timer irq a simple integer variable
exported by the timer driver for the benefit of this one test
(tests/kernel/context).
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This test has gotten out of control. It has a giant #if cascade
enumerating every timer driver in the Zephyr tree and extracting its
interrupt number. Which means that every driver needs to somehow
expose that interrupt in its platform headers or some other API.
Make it a simple integer variable exported by the timer driver for the
benefit of this one test.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Path list was replaced accidentally with free list during refactoring.
This change does fix the issue.
Signed-off-by: Veijo Pesonen <veijo.pesonen@nordicsemi.no>
Picolibc doesn't have the non-standard printf support required for tagged
arguments in cbprintf. Disable this and use the format string parsing code
instead.
Signed-off-by: Keith Packard <keithp@keithp.com>
Some errors can occur in the sending process that have to be handled
in a polling fasion instead of blocking using semaphores. In this case
apply an exponentially growing backoff time. This will allow for fast
reactions in most situations and prevents high system loads in case
resolving the situation takes a little longer.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
Enable single-threaded support for the arm64 archtecture.
This mode of execution is supported on an soc under
development and is validated regularly.
Signed-off-by: Eugene Cohen <quic_egmc@quicinc.com>
In performing a double check of Zephyr arm64 MMU config
against edk2, a different in the programming of the
Translation Control Register (TCR) was found. TCR.TG[1]
should be set to address Cortex-A57 erratum 822227:
"Using unsupported 16K translation granules might cause
Cortex-A57 to incorrectly trigger a domain fault"
Signed-off-by: Eugene Cohen <quic_egmc@quicinc.com>
MCUboot was synchronized up to upstream:
1270880d2f717f9019742f5c450441aaf0504164
- boot_serial: refactoring and optimalization (mainly afects
progressive erase implementation)
- migrate includes to <zephyr/...>
- switched DFU detection GPIO-pin configuration to be done through DTS.
That pin is assigned thanks to `mcuboot-button0` pin-alias.
- boot_serial: Fix echo command code no longer compiling
- Added MCUboot status callback support, see `CONFIG_MCUBOOT_ACTION_HOOKS`
Kconfig option.
- reworked LED usage, prefer DTS mcuboot-led0 alias over bootloader-led0
alias
- Added initial support for leverage RAM-LOAD mode with the zephyr-rtos
port
- boot_serial: Upgrade from cddl-gen 0.1.0 to zcbor 0.4.0
- imgtool: Added support for providing the signature by 3rd party
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
The change in this commit is required to avoid regression errors
on EBQ test for the PHY update procedure
When in the peripheral role transmission of data must be resumed
while waiting for the PHY IND response from peer.
In other words: in the LP_PU_STATE_WAIT_TX_ACK_PHY_REQ state
data transmission must resume when acting as peripheral,
but not when in the central role
Following tests are effected
LL/CON/PER/BV-49-C
LL/CON/PER/BV-50-C
LL/CON/PER/BV-52-C
LL/CON/PER/BV-53-C
LL/CON/PER/BV-54-C
LL/CON/PER/BV-55-C
LL/CON/PER/BV-56-C
LL/CON/PER/BV-58-C
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
The pausing and timing of data transmission is changed in the PHY update
procedure, so that conformance tests passes. This requires an update
in unittests as well
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
This PR fixes the PHY update procedures for conformance tests when
being a Central
The problem was that data was in the LLL tx queue and was still being
queued before the PHY IND was queued (with a given instant).
As a result by the time the PHY IND was transmitted over the air the
instant was in the past.
The fix is to ensure that the LLL tx queue is empty, and to stop
queueing new data before queueing the PHY IND
Following tests are fixed:
LL/CON/CEN/BV-49-C
LL/CON/CEN/BV-50-C
LL/CON/CEN/BV-53-C
LL/CON/CEN/BV-54-C
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
This commits prefixes all the definitions
with 'SPI_' to be used by the sample application.
This will avoid compilation conflict especially
on FLASH_SECTOR_SIZE.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The BT_CODEC_LC3_CONFIG_* macros had a hardcoded location
and context, which makes them a lot less usable.
Updates the macro, and the macros that used them.
This also removes the BT_CODEC_LC3_CONFIG and instead
just uses the BT_CODEC_LC3_CONFIG_N macro, which has
then been renamed to BT_CODEC_LC3_CONFIG.
As an addition, the macros and their input has
also been better documented.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
In LE Audio we both have Stream Context and Preferred Context.
Rename to make it more explicit what context should be supplied
to those macros.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The scan response API is fairly unclear and it is not
mentioned that the scan recv callback is also for
scan responses. Added some additional text and
information for the scan callbacks.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This commit introduces driver for granting access for own grant
table and for mapping/unmapping foreign gref. Grant tables are used
for data exchange between Xen domains via shared memory page(s) (e.g.
for sharing ring buffer with driver data) This functionality is
widely used and needed for implementing PV backend/frontend drivers.
Signed-off-by: Dmytro Firsov <dmytro_firsov@epam.com>
This sample depends on lvgl, so do not try and build it if lvgl is not
part of the workspace and if it was excluded in a local manifest.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
enable swo output for iMX RT 10xx series. SWO pinmux settings are
currently only present for the RT1060 and RT1064
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Enable pin control support for SWO log backend, by creating a new
ITM node for the ARM instrumentation trace macrocell. Add pin control
properties under this node, and refactor the swo-req-freq property to be
defined within this node.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
These tests work in tandem with the cavstool.py script: the script
receives IPC messages and properly acts on them. However, it may take
some time to the script execution arrive at the point in which it's
ready to receive incoming messages. This patch makes the test code wait
some arbitrary time to allow the script to reach the desired state.
Note that another IPC message could be used to this end, but since some
tests are actually testing the IPC mechanism, it seems unwise to assume
IPC works for set up steps.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
It seems a race can happen between the host acknowledging a DONE
interrupt and the DSP being able to mark some IPC as done. To avoid
this, the host script now always acknowledges the DONE interrupt
_before_ processing the IPC message.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
Default to 1 CPU core on the Xilinx Zynq-7000 SoC series since Zephyr does
not yet suppport SMP on aarch32.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Change the Kconfig prompt for the Xilinx Zynq-7000/ZynqMP PS UART driver to
indicate whichs SoCs it supports.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Add Xilinx Zynq-70000 pinctrl header file to define SoC specific
pinctrl_soc_t structure. This is used to store pin configurations for the
pinctrl driver.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Do not lock/unlock the System Level Control Registers (SLCRs) in the Xilinx
GEM ethernet driver. The SLRCs are unlocked once at boot time.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Unlock the Xilinx Zynq-7000 System Level Control Registers (SLCR) at boot
to allow write access using the generic syscon driver.
Since the generic syscon driver uses the DEVICE_MMIO_* APIs for
memory-mapped IO we can remove the dedicated SLCR MMU region.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Add devicetree node for the pinctrl of the Xilinx Zynq-7000 series. Pinctrl
is set through a subset of the System Level Control Registers (SLCR), which
is accessed through the syscon driver.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Generate definitions for *_IDX_n_TOKEN and *_IDX_n_UPPER_TOKEN for all
string-array type properties.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
We get type mismatch errors because of use of K_MSEC. As the timeout
is defined in terms of milliseconds and k_uptime_get() returns
milliseconds we can just remove K_MSEC usage.
Signed-off-by: Kumar Gala <galak@kernel.org>
