This fixes the SPI DTS bug on the nrf5340_audio_dk board
which was introduced by b8978e9:
unit address and first address in 'reg' (0x0) don't match
for /soc/peripheral@50000000/spi@a000/sdhc@1
unit address and first address in 'reg' (0x1) don't match
for /soc/peripheral@50000000/spi@a000/cs47l63@2
Signed-off-by: Tim Sørensen <tims@demant.com>
With this configuration of the device tree, we use 80 MHz as
a FDCAN bus clock. This configuration allows to pass the tests.
Signed-off-by: Tomáš Juřena <jurenatomas@gmail.com>
After recent HWv2 model changes there is defconfig file
broken, so we got incorrect platform configuration. Fix that.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
This adds DT aliases for LED and button used in recovery mode of the
MCUboot bootloader, on the 'nucleo_wba55cg' board.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
This board includes three gpio-connected LEDs and push-buttons. Include
all missing defines in board's DTS and while at it, fix existing button
definition (missing pull-up enable) and align node names with other
boards (e.g. 'nucleo_wb55rg').
Provided changes were tested on real board with 'blinky' and 'button'
samples.
Additionally, duplicated LED nodes no longer required were removed from
overlay file for this board, in 'suspend_to_ram' sample.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
Fix the compile error when input driver is enabled.
Error message:
In file included from zephyr/zephyr/include/zephyr/sys/util_macro.h:34,
from zephyr/zephyr/include/zephyr/irq_multilevel.h:15,
from zephyr/zephyr/include/zephyr/devicetree.h:20,
from zephyr/zephyr/include/zephyr/device.h:12,
from zephyr/zephyr/drivers/input/input_gpio_keys.c:9:
zephyr/zephyr/include/zephyr/toolchain/gcc.h:87:36:
error: static assertion failed:
"zephyr-code must be specified to use the input-gpio-keys driver"
Signed-off-by: Jason Yu <zejiang.yu@nxp.com>
Let's use the native_posix entropy driver by now,
as the real target relies on the PSA one, and we
currently do not have plans to include that.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This is not yet possible.
So let's add a check that provides an easy to understanding
error message instead of a bunch of kconfig and build warnings.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
These tests run fine in this board, let's provide an
overlay and enable them.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
By default, the QSPI region is marked as EXTMEM and inaccessible
(see #57467), mark the first 64MB as IO on stm32f769i_disco.
Signed-off-by: Armin Brauns <armin.brauns@embedded-solutions.at>
According to the datasheet, fRSCLK (Clock Frequency for READ instructions)
is 66MHz; it doesn't mention 72MHz anywhere.
Signed-off-by: Armin Brauns <armin.brauns@embedded-solutions.at>
Access to this region should no longer be requested via UICR, because it
will be statically reserved by secure domain firmware.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
The gpio-emul driver does not actually require any reg property,
since it is not in the physical memory map of any device. So
let's remove that property from the bindings.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Remove all CAN controller "bus-speed" and "bus-speed-data"
properties. These all use the default bitrates set via Kconfig.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
SDHC twister tag indicates that the board supports an SD host controller
driver. Since the ST SDMMC support is provided directly via a disk
driver, SDHC tests are not supported on ST boards. Drop this tag in
order to avoid twister failures running the SDHC tests on these
platforms.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
PHYTEC has multiple offices in different locations like
the US, France, India and China. The headquarter is located in
Germany. Since now 50% of the PHYTEC boards are from the US
office, we should drop 'Messtechnik GmbH', which is the offical
title of the German office, and keep the name more general.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
This commit should add all the functionality needed for the entropy
driver to work when PM is enabled.
Signed-off-by: Ioannis Karachalios <ioannis.karachalios.px@renesas.com>
It is enough to test watchdog driver on the application core.
Otherwise, at least three samples/tests fail due to missing
overlay file for nrf54h20dk/nrf54h20/cpurad.
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
On this board, the CAN transceivers are not GPIO controlled, but passive,
and should not be represented by the "can-transceiver-gpio" compatible (as
this leads to driver compilation warnings due to missing GPIO properties).
Fixes: c8faa1e380
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
This commit makes the devicetrees of the targets that are based on the QEMU
`virt` machine more consistent with the rest of the RISC-V targets in
Zephyr by:
* adding the `riscv,isa` property
* adding a compatible string which uniquely identifies the `virt` core
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Add support for USDHC0 controller on FRDM_MCXN947 board. This support
was verified using the `tests/subsys/sd/sdmmc` and
`tests/subsys/sd/sdio` testcases. Note that this board does not ship
with the SD header (J12) populated by default, so the user must populate
one.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
The CSI can connect to either a camera sensor (as on i.MX RT10xx) or
a MIPI CSI-2 receiver (as on i.MX RT11xx). To be generic, change the
naming from sensor to source.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
This commit should add all the functionality needed for the DISPLAY
driver to work when PM is enabled.
Signed-off-by: Ioannis Karachalios <ioannis.karachalios.px@renesas.com>
Enable PXP on RT1050 EVK, and apply LVGL settings optimized for PXP
support. These settings will enable PXP rotation to function as expected
when using LVGL with the RT1050.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
The naming of these two options was problematic, since it's both of them
are about vendor extensions, even though one has _EXT in the name and
the other doesn't. Just merge one option into the other. This has a
slight overhead on the controller side of enabling some more vendor
features if BT_HCI_VS is enabled, but that should hopefully be
acceptable.
Signed-off-by: Johan Hedberg <johan.hedberg@gmail.com>
Pin muxing for i2c6 and csi should be separated as i2c is initialized
before csi. Otherwise, i2c6 bus device will not be ready when the
camera sensor on this bus initializes.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
esp32s3 contains 2 cpus: procpu and appcpu.
appcpu has very limited peripherals support for now.
This updated esp32s3_touch board to list only support peripherals.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
This board uses a ULPI PHY to provide HS (USB 2.0) connectivitiy instead of
the internal PHY, which only supports FW (USB 1.x).
Signed-off-by: Armin Brauns <armin.brauns@embedded-solutions.at>
