Cleanup and preparation commit for linker script generator.
Zephyr linker scripts provides start and end symbols for each section,
and sometimes even size and LMA start symbols.
Generally, start and end symbols uses the following pattern, as:
Section name: foo
Section start symbol: __foo_start
Section end symbol: __foo_end
However, this pattern is not followed consistently.
To allow for linker script generation and ensure consistent naming of
symbols then the following pattern is introduced consistently to allow
for cleaner linker script generation.
Section name: foo
Section start symbol: __foo_start
Section end symbol: __foo_end
Section size symbol: __foo_size
Section LMA start symbol: __foo_load_start
This commit aligns the symbols for _ramfunc_ram/rom to other symbols and
in such a way they follow consistent pattern which allows for linker
script and scatter file generation.
The symbols are named according to the section name they describe.
Section name is `ramfunc`
The following symbols are aligned in this commit:
- _ramfunc_ram_start -> __ramfunc_start
- _ramfunc_ram_end -> __ramfunc_end
- _ramfunc_ram_size -> __ramfunc_size
- _ramfunc_rom_start -> __ramfunc_load_start
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Add support of ARC mpu v6
* minimal region size down to 32 bytes
* maximal region number up to 32
* not support uncacheable region and volatile uncached region
* clean up mpu code for better readablity
Signed-off-by: Yuguo Zou <yuguo.zou@synopsys.com>
This function should be pinned in memory instead of simply
putting it in the boot section, as this function will be
used when new threads are created at runtime.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
If generic section is not present at boot, the thread stack
may not be in physical memory. Unconditionally page in the stack
instead of relying on page fault to speed up a little bit
on starting the thread.
Also, this prevents a double fault during thread setup when
setting up stack permission in z_x86_userspace_enter().
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
When converting the address and size arguments for extra mappings,
the script assumes they are always base 16. This is not always
the case. So let Python's own int() decides how to interpret
the values as it supports "0x" prefix also.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
With demand paging, it is possible for data pages to not be
present in physical memory. The gen_mmu.py script is updated
so that, if so desired, the generic sections are marked
non-present so the paging mechanism can bring them in
if needed.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
If the BSS section is not present in physical memory at boot,
do not zero the section, or else page faults would occur.
The zeroing of BSS will be done once the paging mechanism
has been initialized.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds the kconfig to allow reserving a number of page frames
which do not count towards free memory. This is to ensure that
there are enough page frames available for paging code and data.
Or else, it would be possible to exhaust all page frames via
anonymous memory mappings.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Enable RISC-V GP relative addressing by linker relaxation to reduce
the code size. It optimizes addressing of globals in small data section
(.sdata).
The gp initialization at program start needs each SoC support. Also,
if RISC-V SoC has custom linker script, SoC should provide
__global_pointer$ symbol in it's linker script.
Signed-off-by: Jim Shu <cwshu@andestech.com>
This prevent the new thread to attempt accessing cached ptable entries
which are no longer valid.
Signed-off-by: Manuel Argüelles <manuel.arguelles@coredumplabs.com>
Increases the default CONFIG_TEST_EXTRA_STACKSIZE for the 32-bit RISC-V
architecture. This fixes the portability.posix.fs test on the
qemu_riscv32 platform.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This reverts commit 7b09d031fa. Because
context save of GP register is removed, we don't need to initialize GP
at thread init. GP will be a constant value so that it could only be
initialized at program start.
Signed-off-by: Jim Shu <cwshu@andestech.com>
RISC-V global pointer (GP) register is neither caller nor callee
register, and it's a constant value in the single ELF file. Thus, we
don't need to save/restore GP at ISR enter/exit. Remove it to optimize
context switch performance.
Signed-off-by: Jim Shu <cwshu@andestech.com>
Related to github #22290. Getting interrupt during mpu buffer validate
is corrupting index register. Fix applied to ARC is to disable
interrupts during the buffer validate operation.
Signed-off-by: Phil Erwin <phil.erwin@lexmark.com>
Cortex-A/R does not have hardware supported nested interrupts, but it is
easily emulatable using the nesting level stored in the kernel
structure.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
Add functionality based on Cortex-M that enables recovery from a data
abort using zephyr's exception recovery framework. If there is a
registered z_exc_handle for a function, then use its fixup address if
that function aborts.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
With the addition of userspace support, Cortex-R needs to use SVC calls
to handle oops exceptions. Add that support by defining ARCH_EXCEPT to
do a svc call.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
The user thread cannot be trusted so do not use the stack pointer it
passes in. Use the thread's privilege stack when in privileged modes to
make sure a user thread does not trick the svc/isr handlers into writing
to memory it should not.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
The arm64_smp_init() is the same initialization level
and priority as the GICv3 interrupt controller. This means
that arm64_smp_init() can be called before the interrupt
controller driver has been initialized if linker decides
to put the driver init entry later. This would result in
faults when arm64_smp_init() is trying to connect interrupts.
So move arm64_smp_init() to PRE_KERNEL_2 instead. SMP
initialization is called later in the boot process so
this should not affect SMP operations.
This is in preparation of making interrupt controller
drivers to be build as static library. The linking order
is going to change which will result in this being
initialized before the interrupt contoller driver.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This commit adds the ARMv8.1-M M-Profile Vector Extension (MVE)
configurations as well as the compiler flags to enable it.
The M-Profile Vector Extension consists of the MVE-I and MVE-F
instruction sets which are integer and floating-point vector
instruction sets, respectively.
The MVE-I instruction set is a superset of the ARM DSP instruction
set (ARMv7E-M) and therefore depends on ARMV8_M_DSP, and the MVE-F
instruction set is a superset of the ARM MVE-I instruction set and
therefore depends on ARMV8_1_M_MVEI.
The SoCs that implement the MVE instruction set should select the
following configurations:
select ARMV8_M_DSP
select ARMV8_1_M_MVEI
select ARMV8_1_M_MVEF (if floating-point MVE is supported)
The GCC compiler flags for the MVE instruction set are specified
through the `-mcpu` flag.
In case of the Cortex-M55 (the only supported processor type for
ARMv8.1-M at the time of writing), the `-mcpu=cortex-m55` flag, by
default, enables all the supported extensions which are DSP, MVE-I and
MVE-F.
The extensions that are not supported can be specified by appending
`+no(ext)` to the `-mcpu=cortex-m55` flag:
-mcpu=cortex-m55 Cortex-M55 with DSP + MVE-I + MVE-F
-mcpu=cortex-m55+nomve.fp Cortex-M55 with DSP + MVE-I
-mcpu=cortex-m55+nomve Cortex-M55 with DSP
-mcpu=cortex-m55+nodsp Cortex-M55 without any extensions
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Metaware assembler doesn't accept '@' symbol in the beginning
of symbol name like GNU does.
Drop excessive '@' for _curr_cpu symbol.
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Increase default stacks sizes for 64bit platforms where it is
required.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Rewrite ARC SMP code with ASM-compat macros so it can be
used for ARCv3 64 bit.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
The TLS global pointer is only set during context switch.
So for the first switch to main thread, the TLS pointer
is NULL which would cause access violation when trying
to access any thread local variables in main thread.
Fix it by setting it before going into main thread.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Cleanup an #ifdef statement in swap_helper.S; use
ARMV6_M_ARMV8_M_BASELINE instead of listing all
Cortex-M baseline implementation variants. This
fixes an issue with Cortex-M23 whose Kconfig
define was not included in the original list.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
When inside an escalated HardFault, we would like to get
more information about the reason for this escalation. We
first check if the reason for thise escalation is an SVC,
which occurs within a priority level that does not allow
it to trigger (e.g. fault or another SVC). If this is true
we set the error reason according to the provided argument.
Only when this is not a synchronous SVC that caused the HF,
do we check the other reasons for HF escalation (e.g. a BF
inside a previous BF).
We also add a case for a debug event, to complete going through
the available flags in HFSR.
Finally we ASSERT if we cannot find the reason for the escalation.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Move the assessment of a synchronous SVC error into a
separate function. This commit does not introduce any
behavioral changes.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Clean up a few more hard-coded constants
in swap_helper.S and replace them with
CMSIS-like defines in cpu.h. No behavioral
changes in this commit.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
When locking interrupt in a critical session, it is
safer to do MSR BASEPRI_MAX instead of BASEPRI. The
rationale is that when writing to BASEPRI_MAX, the
writing is conditional, and is only applied if the
change is to a higher priority level. This commit
replaces BASEPRI with BASEPRI_MAX in operations that
aim to lock some specific interrupts:
- irq_lock()
- masking out PendSV
So, for example, it is not possible to actually
unmask any interrupts by doing an irq_lock operation.
The commit does not introduce behavioral changes.
However, it makes irq_lock() more robust against
future changes to the IRQ locking mechanism.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Baseline Cortex-M requires VTOR to be aligned on 64-word
boundary. That is because bit-7 of VTOR is also RAZ/WI.
The commit updates the vector table section alignment for
Baseline Cortex-M to reflect the implementation constraint.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Platform specific initialization during early boot
has been a feature supported only by Cortex-M; the
Kconfig symbol is define in arch/arm Kconfig space.
We rename the z_platform_init() function to
z_arm_platform_init(), to indicate more clearly that
this is an internal, private ARM-only API.
This commit does not introduce behavioral changes.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Platform specific initialization during early boot
has been a feature supported only by Cortex-M; the
Kconfig symbol is defined in arch/arm Kconfig space.
We rename the z_platform_init() function to
z_arm_platform_init(), to indicate more clearly that
this is an internal, private ARM-only API.
This commit does not introduce behavioral changes.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
If the DebugMonitor extension is implemented by the core,
the interrupt may be pended and become active, even if it
is not enabled. Set the priority level of DebugMonitor upon
system initialization to the intended value unconditionally
so we do not end up in undefined behavior, if the exception
is accidentally pended. Since the priority level is set at
init, we can remove resetting the priority in DWT driver
initialization.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
When the SoC implements SysTick, but the system
does not use it as the driver for system timing
we still need to set its interrupt level. This
is because the SysTick IRQ is always enabled,
so we must ensure the interrupt priority is set
to a level lower than the kernel interrupts (for
the assert mechanism to work properly) in case
the SysTick interrupt is accidentaly raised.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
If the PendSV interrupt is not used by Zephyr (this is
the case when we build with single-thread support) we
route the interrupt to z_arm_exc_spurious, instead of
assigning 0 to the vector table entry. This is because
the interrupt is always enabled and always exists, so
it is safer to always get the proper error report, in
case we accidentally pend the PendSV, for any reason.
We also add a comment in the PendSV priority setting,
explaining why it has to be assigned a priority level
even if it is not used.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Create z_arm_preempted_thread_in_user_mode to abstract the
implementation differences between Cortex-M and R to determine if an
exception came from userspace.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
Create z_arm_thread_is_user_mode to abstract the implementation
differences between Cortex-M and R to determine if the current thread is
in user or kernel mode.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
add .S file extension suffix into CMAKE_ASM_SOURCE_FILE_EXTENSIONS,
because clang from OneApi can't recongnize them as asm files on
windows, then they won't be added into build system.
Signed-off-by: Chen Peng1 <peng1.chen@intel.com>
Correct the wrong operand of clflush instruction. The old operand
points to a location inside stack and doesn't work. The new one
works well by taking linux kernel code as reference.
End address instead of size should get round up
Add Kconfig option to disable the usage of mfence intruction for
SoC that has clfulsh but no mfence supported.
Signed-off-by: Dong Wang <dong.d.wang@intel.com>
This commit avoids enabling interrupts during Zephyr init.
Details:
Interrupts will be enabled only when the first thread starts or if
arch_irq_unlock() is called before that.
The logic is now:
1. Enable traps, disable interrupts globally
2. Initialize bss
3. Call _PrepC
Use in-place memset() to avoid register window overflow and underflow
traps. That is perhaps not the common scenario, but could happen with
memset() implementation which contains SAVE instructions on a system
with few register windows.
The second, and more important, item this commit addresses is that it
increases the processor interrupt level (priority) to highest. That
is, it enters _PrepC with all maskable interrupts levels disabled.
This fixes some cases where interrupts could be taken after
z_clock_driver_init() while the system was still initializing. That
seem to have occurred when clearing large thread stacks.
The third thing is that we now start out with current window pointer
0 (PSR.CWP=0) instead of 1. It has no practical implication except
for preparing for possible future support for systems with only
two windows.
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
Give the choice a name so that the soc/board developers can change the
default selection in their Kconfig.*.
For example:
choice CACHE_TYPE
default HAS_EXTERNAL_CACHE
endchoice
There was a similar issue had beed discussed:
https://github.com/zephyrproject-rtos/zephyr/issues/6948
Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com>
Change-Id: I07c3e78a5243b30912f8e44fa3181fa163016318
Plus added implementation for esp32c3 SoC.
Signed-off-by: Felipe Neves <ryukokki.felipe@gmail.com>
Signed-off-by: Felipe Neves <felipe.neves@espressif.com>
Accumulator registers (ACCL, ACCH) are used on HS CPUs not only
in case of FPU usage but also in case of MPY usage. We enable MPY
for all ARCv2 HS in commit
18a24c3f6 ARC: gcc-m-cpu: use -mcpu=archs as a default for ARCv2 HS
but we didn't enable accumulator registers management.
Let's enable accumulator registers save/restore on all ARCv2 HS CPUs
by default.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
