Unlike assertions, these APIs are active at all times. The kernel will
treat these errors in the same way as fatal CPU exceptions. Ultimately,
the policy of what to do with these errors is implemented in
_SysFatalErrorHandler.
If the archtecture supports it, a real CPU exception can be triggered
which will provide a complete register dump and PC value when the
problem occurs. This will provide more helpful information than a fake
exception stack frame (_default_esf) passed to the arch-specific exception
handling code.
Issue: ZEP-843
Change-Id: I8f136905c05bb84772e1c5ed53b8e920d24eb6fd
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
For exceptions where we are just going to abort the current thread, we
need to exit handler mode properly so that PendSV can run and perform a
context switch. For ARM architecture this means that the fatal error
handling code path can indeed return if we were 1) in handler mode and
2) only wish to abort the current thread.
Fixes a very long-standing bug where a thread that generates an
exception, and should only abort the thread, instead takes down the
entire system.
Issue: ZEP-2052
Change-Id: Ib356a34a6fda2e0f8aff39c4b3270efceb81e54d
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types. This handles the remaining includes and kernel, plus
touching up various points that we skipped because of include
dependancies. We also convert the PRI printf formatters in the arch
code over to normal formatters.
Jira: ZEP-2051
Change-Id: Iecbb12601a3ee4ea936fd7ddea37788a645b08b0
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This is a start to move away from the C99 {u}int{8,16,32,64}_t types to
Zephyr defined u{8,16,32,64}_t and s{8,16,32,64}_t. This allows Zephyr
to define the sized types in a consistent manor across all the
architectures we support and not conflict with what various compilers
and libc might do with regards to the C99 types.
We introduce <zephyr/types.h> as part of this and have it include
<stdint.h> for now until we transition all the code away from the C99
types.
We go with u{8,16,32,64}_t and s{8,16,32,64}_t as there are some
existing variables defined u8 & u16 as well as to be consistent with
Zephyr naming conventions.
Jira: ZEP-2051
Change-Id: I451fed0623b029d65866622e478225dfab2c0ca8
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Scanning for typos in comments and strings.
Change-Id: I3d4db89e0824959252c79c19baa50028354247bd
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The CONFIG_FLASH_LOAD_OFFSET allows the zephyr image to be placed at
an offset from the start of flash. This is useful for situations,
such as with a bootloader, to allow the image to not occupy the very
beginning of flash.
Complement this by adding a CONFIG_FLASH_LOAD_SIZE config, that can
constrain the size of the flash image. With the default of zero, the
behavior is as before, with the image allowed to occupy the rest of
the flash. It can also be defined to a non-zero value which will
constrain the image to occupy that many bytes of flash.
Although this is defined generally, it is currently only supported on
cortex-m targets.
Change-Id: I6e4a0e79c8459f931cd4757c932d20dac740f5f6
Signed-off-by: David Brown <david.brown@linaro.org>
__BYTE_ORDER__, __ORDER_BIG_ENDIAN__ and __ORDER_LITTLE_ENDIAN__ are not
defined when building with xcc, but are defined when building with gcc.
Define them conditionally.
Change-Id: Ib205ffee28360aa240d61731b7a3d6f45401b4c1
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
The SiFive Freedom E310 SOC follows the riscv privilege
architecture specification and hence is declared within
the riscv privilege SOC family.
It also provides support for a riscv
Platform Level Interrupt Controller (PLIC)
Change-Id: I19ff0997eacc248f48444fc96566a105c6c02663
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
Updated the riscv-privilege SOC family to account for SOCs supporting
a Platform-level Interrupt Controller (PLIC) as specified by the
riscv privilege architecture.
riscv-privilege SOCs supporting a PLIC have to implement the following
list of APIs:
void riscv_plic_irq_enable(uint32_t irq);
void riscv_plic_irq_disable(uint32_t irq);
int riscv_plic_irq_is_enabled(uint32_t irq);
void riscv_plic_set_priority(uint32_t irq, uint32_t priority);
int riscv_plic_get_irq(void);
Change-Id: I0228574967348d572afc98a79257c697efc4309e
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
Current users of sys_bitfield*() are bending over backwards to cast
what is most of the times a pointer into an integer.
Bitfields can be better described with an void *, so
uint{8,16,32,64}_t or any other container can be used. Most
sys_bitfield*() operations, by extension, can do the same. Note void *
has byte arithmetic, like char *.
This change will also make it implicit, for any future split of the
address space between virtual (what the SW is seeing) and physical
(what the HW is seeing) way clearer, as the functions dealing with
physical, non directly referentiable/mappeable addreses to use an
integer type, like mem_addr_t.
- include/arch/ARCH/*asm_inline*:
- sys_bitfield*() all modified to take 'void *'
Note 'void *' arihtmethic is byte based, which makes some things
easier.
- include/sys_io.h:
- introduces DEFINE_BITFIELD
- update docs
- tests/kernel/bitfield: remove all the cast contortions, use DEFINE_BITFIELD
PENDING: update other TCs
- include/arch/nios/nios2.h, drivers/interrupt_controller/ioapic_intr.c:
remove cast contortions
Change-Id: I901e62c76af46f26ff0d29cdc37099597f884511
Jira: ZEP-1347
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
It's not entirely clear where the '%P' came from, but the proper,
documented operand modifier for inserting an immediate value without
punctuation is '%c'.
Change-Id: I17346a6c70183ce79e91faa2fbe61e7761dfd513
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Currently, ARM Cortex-M image ROMs are linked starting at the flash
device's base address (CONFIG_FLASH_BASE_ADDRESS). This prevents XIP
Zephyr applications from being linked to run from elsewhere on the
flash device. Linking Zephyr applications to run from elsewhere can be
necessary when running under a bootloader (i.e., booting into a Zephyr
application from a bootloader, not using Zephyr as a bootloader).
To enable this use case, add a new config option: FLASH_LOAD_OFFSET.
This option directs the linker to treat ROM as if it started that many
bytes from the base of flash on Cortex-M targets. The option defaults
to zero to preserve backwards compatibility.
Change-Id: I64f82aee257c19c2451f9789b0ab56999775b761
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
Some arches may want to define this as an inline function, or
define in core arch code instead of timer driver code.
Unfortunately, this means we need to remove from the footprint
tests, but this is not typically a large function.
Issue: ZEP-1546
Change-Id: Ic0d7a33507da855995838f4703d872cd613a2ca2
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This implementation of _tsc_read returns a 64-bit value that
is derived from the 64-bit tick count multiplied by hwcycles per tick,
and then it adds the current value from the 32-bit timer.
This produces a 64-bit time. There is a bunch of math here, which
could be avoided if the CPU is built with Real-Time-Clock option.
EM Starter Kit SOCs don't have this. I don't think Arduino 101 does
either.
See ZEP-1559
Change-Id: I9f846d170246556ac40fe2f45809e457c6375d8c
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Its current placement was splitting the vector table in half.
Move to rodata, a better place for it. There's no requirement for
it to be in the text section.
Change-Id: I67724b2a26a9cb62c2ccd473cb54c53e4f74dc32
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The BSS section needs to use AT> in XIP systems otherwise the LMA
addresses in the ELF binary are wrong, leading to issues if we
try to manipulate the binary with objcopy. The GROUP_DATA_LINK_IN
macro does the right thing here.
This was already done on other arches but ARC was missed.
Change-Id: I93748e919e0b68c1ff2dfb4b85b7064a8d980f3a
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
XCC does neither define __BYTE_ORDER__ nor __ORDER_LITTLE/BIG_ENDIAN__ macros.
This resulted in field preempt of thread.base not correctly built from other
union fields prio and sched_locked, which caused wrong scheduling.
Change-Id: I8566ef4a5cf555906c012c4adc488f9afb26c053
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
1) Fatal errors now all go through _SysFatalErrorHandler. When the
simulator is used, only the death of 'essential' threads will result
in the simulator exiting; some test cases that test exceptions may
actually expect a thread to terminate abnormally.
2) The human readability of the exception errors is improved.
Change-Id: I77f57ea0eae15b0c55237681b959cd21e3fe8c1c
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
find_msb_set logic was wrong. find_lsb_set() is now an inline function.
Change-Id: I2c19540907723589298b2f6af2ce1d68704bf1d7
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Master branch changed requirements for license headers while this
branch has been in development.
Change-Id: I9bce16ff275057a4bb664019628fc9b6de7aef7c
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
In order for OpenOCD to have a high-level view of an RTOS, it uses the
GDB protocol to obtain symbols from the system.
The GDB protocol, however, does not allow obtaining fields from
structures directly, and hardcoding offsets is not only brittle (due to
possibly different architectures or changes in the code), it's also
infeasible considering Zephyr is highly-configurable and parts of key
structs can be compiled in or out.
Export an array with offsets for these key structs. Also add a version
element in that array to allow changes in those structs.
Change-Id: I83bcfa0a7bd57d85582e5ec6efe70e1cceb1fc51
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
This replaces the hard-coded vector table, as well as the
software ISR table created by the linker. Now both are generated
in build via script.
Issue: ZEP-1038, ZEP-1165
Change-Id: Ie6faaf8f7ea3a7a25ecb542f6cf7740836ad7da3
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This patch moves the include for the generated_dts_board.h inside of
the include/arch/arm/arch.h file. This was done to simplify the
includes required for files. Only two files will include the dts
generated include file directly: arch.h and the linker.ld
Change-Id: I2614f4fd4eeed2ab635a3264d7dac8b83f97b760
Signed-off-by: Andy Gross <andy.gross@linaro.org>
We now use CMSIS for ARM Cortex-M SoCs so we can remove the last bits of
scs and scb.
Jira: ZEP-1568
Change-Id: I0c7c45b0321dc402ed594e9faffb5109922edcf0
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
_SCS_CPACR_CP10_Pos and _SCS_CPACR_CP11_Pos come from scs.h, we have
versions defined in cmsis.h we should be using instead.
Change-Id: Icd8db02000bbc9ef8b2cf89d359e008f62a7d5e9
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Coverted:
_ScbMemFaultMmfarReset
_ScbBusFaultBfarReset
_ScbUsageFaultAllFaultsReset
To use direct CMSIS register access.
Also removed scb.h and references as there is no longer any code in it.
Jira: ZEP-1568
Change-Id: I469f6af39d1bd41db712454b0b3e5ab331979033
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The previous code incorrectly used the value 0xfe to clear the mem and
bus faults. It attempted to handle the address register valid bits
separately, but reversed the bit order.
Jira: ZEP-1568
Change-Id: I240d072610af9979ca93c0081ed862df08929372
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Coverted:
_ScbBusFaultAddrGet
_ScbMemFaultAddrGet
To use direct CMSIS register access
Jira: ZEP-1568
Change-Id: Ic49b3ac3fc4fb63d413f273569c77f6539e4e572
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This patch adds support for using device tree configuration files for
configuring ARM platforms.
In this patch, only the FLASH_SIZE, SRAM_SIZE, NUM_IRQS, and
NUM_IRQ_PRIO_BITS were removed from the Kconfig options. A minimal set
of options were removed so that it would be easier to work through the
plumbing of the build system.
It should be noted that the host system must provide access to the
device tree compiler (DTC). The DTC can usually be installed on host
systems through distribution packages or by downloading and compiling
from https://git.kernel.org/pub/scm/utils/dtc/dtc.git
This patch also requires the Python yaml package.
This change implements parts of each of the following Jira:
ZEP-1304
ZEP-1305
ZEP-1306
ZEP-1307
ZEP-1589
Change-Id: If1403801e19d9d85031401b55308935dadf8c9d8
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This private data structure now no longer introduces a typedef or
uses CamelCase. It's not necessary to specify the size of extern
arrays, so we don't need a block of #ifdefs for every arch.
Change-Id: I71fe61822ecef29820280a43d5ac2822a61f7082
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Added a linker script that shall be common to most riscv SOCs.
Linker script also accounts for execution in place in ROM, when
CONFIG_XIP is set.
Nonetheless, riscv32 SOCs (like pulpino) requiring a different
system layout can still define their own linker script.
Change-Id: I3ad670446d439772c29a8204e307ac79643dc650
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
