Add support for mipi_dsi_detach API to dsi_mcux_2l driver, and
update RT5xx SOC interface to enable halting clocks for the MIPI DPHY.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Enable NXP FlexRAM in DTS and SOC code.
Do not configure flexram at runtime if the code is in the RAM.
Fix RT1060 DT to be more accurate.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Allow user to disable CONFIG_ADJUST_DCDC for their board, rather than
selecting it at the SOC level. The symbol still defaults to enabled,
preserving existing behavior unless a user explicitly chooses to disable
it.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
For this SoC, an additional section is conditionally included on top of
the default linker script for Cortex-M. Set `SOC_LINKER_SCRIPT` to the
local `linker.ld`.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
Remove CONFIG_IPM_IMX_REV2, as this Kconfig is no longer needed. The
driver can now be enabled with CONFIG_IPM_IMX.
Update NXP HAL to remove this Kconfig as well.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Remove nxp,imx-mu-rev2 compatible. This IP block is the same as the
nxp,imx-mu device, and should be handled by the same compatible
Instead, use CONFIG_HAS_MCUX to determine which HAL APIs should be used
to interact with the messaging unit IP.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
This commit updates all arm SoCs to set SOC_LINKER_SCRIPT CMake
variable to point to active linker script directly.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Add support for SMARTDMA to RT5xx SOCs. SMARTDMA ram banks will be
powered up, so code can be programmed into this region for the SMARTDMA
engine.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
The iMX RT bootrom allows the user to load images into RAM regions from
flash by providing a correctly configured boot header. In particular, if
the boot header contains a load address within RAM, the bootroom will
automatically copy the image to the load address before executing it
Introduce CONFIG_NXP_IMX_RT_ROM_RAMLOADER to enable this feature. This
Kconfig will shift the LMA of a image built to run in a RAM region to
reside in the default FlexSPI boot region, which allows the image to be
loaded to the FlexSPI region using west. This is intended to simplify
development of applications executing from RAM on iMX RT based systems.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
This is the final step in making the `zephyr,memory-attr` property
actually useful.
The problem with the current implementation is that `zephyr,memory-attr`
is an enum type, this is making very difficult to use that to actually
describe the memory capabilities. The solution proposed in this PR is to
use the `zephyr,memory-attr` property as an OR-ed bitmask of memory
attributes.
With the change proposed in this PR it is possible in the DeviceTree to
mark the memory regions with a bitmask of attributes by using the
`zephyr,memory-attr` property. This property and the related memory
region can then be retrieved at run-time by leveraging a provided helper
library or the usual DT helpers.
The set of general attributes that can be specified in the property are
defined and explained in
`include/zephyr/dt-bindings/memory-attr/memory-attr.h` (the list can be
extended when needed).
For example, to mark a memory region in the DeviceTree as volatile,
non-cacheable, out-of-order:
mem: memory@10000000 {
compatible = "mmio-sram";
reg = <0x10000000 0x1000>;
zephyr,memory-attr = <( DT_MEM_VOLATILE |
DT_MEM_NON_CACHEABLE |
DT_MEM_OOO )>;
};
The `zephyr,memory-attr` property can also be used to set
architecture-specific custom attributes that can be interpreted at run
time. This is leveraged, among other things, to create MPU regions out
of DeviceTree defined memory regions on ARM, for example:
mem: memory@10000000 {
compatible = "mmio-sram";
reg = <0x10000000 0x1000>;
zephyr,memory-region = "NOCACHE_REGION";
zephyr,memory-attr = <( DT_ARM_MPU(ATTR_MPU_RAM_NOCACHE) )>;
};
See `include/zephyr/dt-bindings/memory-attr/memory-attr-mpu.h` to see
how an architecture can define its own special memory attributes (in
this case ARM MPU).
The property can also be used to set custom software-specific
attributes. For example we can think of marking a memory region as
available to be used for memory allocation (not yet implemented):
mem: memory@10000000 {
compatible = "mmio-sram";
reg = <0x10000000 0x1000>;
zephyr,memory-attr = <( DT_MEM_NON_CACHEABLE |
DT_MEM_SW_ALLOCATABLE )>;
};
Or maybe we can leverage the property to specify some alignment
requirements for the region:
mem: memory@10000000 {
compatible = "mmio-sram";
reg = <0x10000000 0x1000>;
zephyr,memory-attr = <( DT_MEM_CACHEABLE |
DT_MEM_SW_ALIGN(32) )>;
};
The conventional and recommended way to deal and manage with memory
regions marked with attributes is by using the provided `mem-attr`
helper library by enabling `CONFIG_MEM_ATTR` (or by using the usual DT
helpers).
When this option is enabled the list of memory regions and their
attributes are compiled in a user-accessible array and a set of
functions is made available that can be used to query, probe and act on
regions and attributes, see `include/zephyr/mem_mgmt/mem_attr.h`
Note that the `zephyr,memory-attr` property is only a descriptive
property of the capabilities of the associated memory region, but it
does not result in any actual setting for the memory to be set. The
user, code or subsystem willing to use this information to do some work
(for example creating an MPU region out of the property) must use either
the provided `mem-attr` library or the usual DeviceTree helpers to
perform the required work / setting.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
This commit follows the parent commit work.
This commit introduces the following major changes.
1. Move all directories and files in 'include/zephyr/arch/arm/aarch32'
to the 'include/zephyr/arch/arm' directory.
2. Change the path string which is influenced by the changement 1.
Signed-off-by: Huifeng Zhang <Huifeng.Zhang@arm.com>
It doesn't make sense to keep the aarch32 directory in the
'arch/arm/core' directory as the aarch64 has been moved out.
This commit introduces the following major changes.
1. Move all directories and files in 'arch/arm/core/aarch32' to
'arch/arm/core' and remove the 'arch/arm/core/aarch32' directory.
2. Move all directories and files in 'arch/include/aarch32' to
'arch/include' and remove the 'arch/include/aarch32' directory.
3. Remove the nested including in the 'arch/include/kernel_arch_func.h'
and 'arch/include/offsets_short_arch.h' header files.
4. Change the path string which is influenced by the changement 1
and 2.
Signed-off-by: Huifeng Zhang <Huifeng.Zhang@arm.com>
Update iMX RT boot header to support CONFIG_XIP=n, when the image is not
linked into the flash space. Also, update the boot header to correctly
calculate the flash used size within the boot data header. This field is
used by the iMX boot ROM to determine how much data to copy when running
from RAM, so using the correct size fixes an issue where the ROM would
copy more data than needed.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
The CMSIS module glue code was part of arch/ directory. Move it to
modules/cmsis, and provide a single entry point for it: cmsis_core.h.
This entry header will include the right CMSIS header (M or A/R).
To make this change possible, CMSIS module Kconfig/CMake are declared as
external, allowing us to add a new Zephyr include directory.
All files including CMSIS have been updated.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Move arm_mpu_mem_cfg header to common include directory.
The benefits are two-fold:
- Allow for out of tree SoC definitions to use them to
define mpu_regions.
- Remove odd relative include path
Signed-off-by: Moritz Fischer <moritzf@google.com>
Configure ENET_REF_CLK direction as input when
CONFIG_ETH_MCUX_RMII_EXT_CLK is set to allow Ethernet external clock
usage.
Signed-off-by: Benjamin Lemouzy <blemouzy@centralp.fr>
Adds support for the NXP VMU RT1170 board. This Vehicle
Management Unit based on the i.MX RT1176 brings a fantastic
combination of sensors and IO all on one board for development
of various systems. It is also the featured board for
CogniPilot's Cerebri - VMU autopilot software based on Zephyr.
Co-authored-by: Peter van der Perk <peter.vanderperk@nxp.com>
Signed-off-by: Benjamin Perseghetti <bperseghetti@rudislabs.com>
Remove CONFIG_OCRAM_NOCACHE setting, as this is now possible to achieve
using devicetree linker regions, and there is no point in having a
specific Kconfig for one memory region on the RT series like this.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Enable SOC fixed MPU regions by default for the RT10xx/RT11xx SOC lines.
Additionally, add code to handle defining the SDRAM0 region as
device type (non cacheable, non shareable). This behavior can
be disabled with CONFIG_NXP_IMX_EXTERNAL_SDRAM=y. Set this Kconfig
for all boards in tree using SDRAM.
This will resolve an issue present on the RT11xx series where
the core may execute speculative prefetches to the SDRAM region when
no SDRAM is present on the board, resulting in the system faulting.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Don't default CONFIG_DEVICE_CONFIGURATION_DATA to enabled for iMX RT
SOCs, as this configuration block is only used when the board needs
peripherals like the external memory controller setup from reset by the
bootrom.
Enable this feature on all in tree boards that will require it,
and document the change to the default value in release notes.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Remove unnecessary __weak attribute from power management functions.
These functions are now defined once, globally, and mandatory for
systems that support CONFIG_PM.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Add a new Kconfig option that has to be selected by SoCs providing PM
hooks. This option will be now required to enable CONFIG_PM. Before this
change, CONFIG_PM could always be enabled, regardless of SoC providing
any kind of low-power support.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
NMI_INIT() is now a no-op, so remove it from all SoC code. Also remove
the irq lock/unlock pattern as it was likely a cause of copy&paste when
NMI_INIT() was called.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This patch sets ENET2 ref clock to be generated by External OSC
ENET2 ref clock direction as output
ENET2 ref clk frequency to 50MHz
Signed-off-by: Sumit Batra <sumit.batra@nxp.com>
Disable RT boot header for CM4 core. This will ensure the boot header is
not present when building an application targeting RAM on the CM4.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add FLEXSPI1 and FLEXSPI2 memory sections for RT5xx SOC. These sections
can be used by the user's application as part of a custom linker script,
if the application needs to relocate a buffer to external SRAM connected
to FLEXSPI1 or FLEXSPI2
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
This patch enables the PLL clock output and PLL ref clock
for second ethernet module in NXP's i.MxRT106x SoCs
Signed-off-by: Sumit Batra <sumit.batra@nxp.com>
1. Enable os_timer as a wakeup-source in the board
dts file.
2. Enable PM_DEVICE when PM is enabled.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
board:
- update device tree to use flexcomm devices to the chip design
- enable clocks (soc init file)
- setup connections for loopback test in system controller (board init
file)
tests:
- update board files (overlay, conf)
Signed-off-by: Yves Vandervennet <yves.vandervennet@nxp.com>
Update MCUX ELCDIF driver to use new LCDIF bindings. This
update also adds support for configuring the root clock of
the ELCDIF module based on the pixel-clock property to the
RT11xx SOC clock init, as this SOC series has this IP block
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Update DCNANO LCDIF IP to use shared lcd interface binding. This
requires changes to the RT5xx SOC and RT595 EVK, as this SOC
uses the LCDIF IP, and configures the clock for it based off
the new pixel-clock property.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Introduce phy-clock property, which is used by MIPI devices to determine
the target clock frequency for the MIPI PHY. This property can vary
depending on the attached display and target framerate.
Update the MIPI DSI MCUX driver to utilize this property to configure
the MIPI host, and update the RT500 clock initialization to configure
the MIPI root clock based on this property.
Remove dphy-clk-div property from the MIPI DSI 2L binding, as it
is redundant with this change.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Ensure code cache is enabled at boot for RT11xx. CMSIS SystemInit should
enable the code cache, but if CONFIG_INIT_ARCH_HW_AT_BOOT=y and
CONFIG_CACHE_MANAGEMENT=y, then the cache will be disabled after
SystemInit is called. Since calling SCB_EnableICache will not
change hardware settings if the ICACHE is already enabled, just
call it unconditionally during init.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
For certain combinations of configuration parameters,
z_arm_init_arch_hw_at_boot() disables the instruction cache. Make sure
to re-enable it if required.
Signed-off-by: Jan Peters <peters@kt-elektronik.de>
