Increase the number of works to help PR throughput as we get
close to code freeze. Will revert this back after code freeze.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Fixed check condition for GPIO pin number.
This check is done
before reading or writing value for the pin.
Verified on ehl_crb.
Signed-off-by: U Divya <u.divya@intel.com>
Added support for GPIO driver for Intel Elkhart Lake
board.
The GPIO driver will support pin value read/write operations,
pin direction and interrupt configuration. ACPI enumeration
support and support for different GPIO communities is also
present.
Verified on ehl_crb.
Signed-off-by: U Divya <u.divya@intel.com>
Contrary to the documentation giving a semaphore while an IRQ lock is
held does not release the lock and give control to another thread.
The release-lock behavior is observed only if the lock-holding thread
sleeps.
However the opportunity to reschedule will have been lost so it may be
necessary to explicitly yield to allow the higher-priority thread to
be serviced.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
ADC emulator is designed to be used in tests on native_posix board. It
supports 1-16 bit resolution range and all GAINs from enum adc_gain.
Reference voltages and number of emulated channels are set through dts.
Using special API from drivers/adc/adc_emul.h it is possible to set
constant voltage value returned by given ADC channel or set custom
function which allows to simulate complex output.
Also reference voltages can be changed in runtime using the API.
The CL also includes:
- Add adc definitions of ADC emulator in
tests/drivers/adc/adc_api/src/test_adc.c for supporting test suites.
- Add test for ADC emulator API in tests/drivers/adc/adc_emul/
Signed-off-by: Tomasz Michalec <tm@semihalf.com>
Replace the use of LL_FEAT define with ll_feat_get() so that
feature set value can be updated at runtime with host
feature bit values.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
add dma support to adc driver
add HW trigger dma support
using new dma api to request dma channel
tested on frdm_k82f and frdm_k64f
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
add adc_dma test application
enable periodic_trigger flag for adc edma
enable for frdm_k64f and frdm_k82f
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
add dts bingings for dma usage
add dts support for adc with edma and hwtrigger
add a periodic_trigger feature to dts
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
Adds a Babblesim test suite for the volume control service
and client, that exercises the entire API and most of the
VCS functionality.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This commit implements the volume control service (VCS) and
client, The implementation supports and uses the
Audio Input Control Service (AICS) and
Volume Offset Control Service (VOCS) secondary services.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fix radio event scheduling stall when using BT_CTLR_LOW_LAT
feature.
Performing a Connection Update Procedure on an ACL
connection while simultaneously having continuous scanning
causes the ACL connection to drop in nRF51 series which uses
BT_CTLR_LOW_LAT by default.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add a release note entry for the new Zephyr boards
supported in TF-M in Zephyr v.2.6.0.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
qemu arc has limited support for DIV/REM, no DIVZERO exception
throw, so we need to skip trigger_fault_divide_zero test case.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
This test fails on qemu_arc_{em|hs} consistently,
due to bug in quem_arc, details:
https://github.com/foss-for-synopsys-dwc-arc-processors/qemu/issues/14.
To get clean results we need to disable this test until the
bug is fixed and fix gets propagated to new Zephyr-SDK.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
The USB HID class API offers the possibility to register callbacks
for Get/SetIdle, Get/SetProtocol to the application.
Rules for these callbacks are neither obvious nor documented.
This patch remove this possibility to register Get/SetProtocol
and Get/SetIdle callbacks for the following reasons:
The possibility to call unknown application code while processing
control requests should be avoided or reduced to a minimum.
The Get/SetProtocol callbacks are redundant and do not provide any
additional value since the way to inform the application
about the change of the protocol exists via the callback
hid_protocol_cb_t protocol_change.
The core provides implementation to handle Get/SetIdle requests and
on idle reports. If this is not suitable in any way then the application
should implement everything itself.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Update the STM32 HAL to fix the SPI pin configuration in order to reduce
power consumption in STOP mode.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Added Kconfig option to configure the maximum Broadcast and
Synchronized Receiver ISO PDU length.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Usage of k_work object from within net_pkt results in undefined behavior
in case when net_pkt is deallocated (by net_pkt_unref()) before work has
been finished.
Use per socket k_work object (sock->send_work) to submit send work and
put net_pkt objects onto k_fifo (sock->tx_fifo). Add a helper function
esp_socket_queue_tx() for that, which will make sure that packets are
enqueued only when send work handler will be successfully submitted (so
that all packets are consumed/dereferenced).
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
This commit allows a subsystem to specify additional CMake flags to be
given to the TF-M build.
The additional CMake flags can be provided through the TFM_CMAKE_OPTIONS
property on the zephyr_property_target.
Using the zephyr_property_target allows Zephyr modules to append extra
TFM_CMAKE_OPTIONS regardless of the CMake processing order.
It splits the ExternalProject_Add into a two step process with the CMake
invocation executed using add_custom_target() and the build process
using ExternalProject_Add(). The reason for this split is because CMake
generator expressions passed through ExternalProject_Add to CMake will
quoted so that `$<TARGET_PROPERTY:<tgt>,<prop>>` becomes
`"-DFOO=bar -DBAR=foo"` instead of `-DFOO=bar -DBAR=foo` which again
results in CMake failures.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Add SCIF bus initial support to Renesas R-Car SOC series.
SCIF1 is used as main serial and shell output on R-Car H3 board.
Signed-off-by: Aymeric Aillet <aymeric.aillet@iot.bzh>
This patch add support for polling based UART
on the Renesas R-Car SCIF (Serial Communication Interface
with FIFO)
This hardware block can be found on various Renesas R-Car
SoC series.
It allows to get console on R-Car Gen3 H3ULCB board.
Signed-off-by: Aymeric Aillet <aymeric.aillet@iot.bzh>
Renesas has Serial Communication Interface with
FIFO (SCIF) hardware block which allow asynchronous and
synchronous serial communication. The SCIF has 16-stage FIFO
buffers separately for transmissions and reception.
Signed-off-by: Aymeric Aillet <aymeric.aillet@iot.bzh>
The amount of needed done events changes when using the "must expire"
logic.
Make the amount vendor configurable (via ull_vendor.h)
Defaults to the original amount of 3.
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
Avoid calling PPI driver when enhanced poll functionality is
disabled. Fixing a case when driver failed to compile when
enhanced poll is disabled for all instances.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The HCI specification creates additional complexity to allow this
configuration:
- When a connection gets established, we need to know which
identity the HCI_LE_Connection_Complete event corresponds to.
- The identity is a property of the advertising set.
Therefore we need the advertising handle.
- The advertising handle is part of the
HCI_LE_Advertising_Set_Terminated event and is not part of
the HCI_LE_Connection_Complete event. Therefore
the information of both events needs to be combined.
By spec the LE_Connection_Complete comes first. Therefore we cache
this event until the identity is available.
The event is only cached when a connection gets established as
that is the only case where we need to resolve the identity.
As the caching requires more resources, it is only enabled if the
application requires multiple advertising sets and multiple
identities.
The host maps the HCI_LE_Advertising_Set_Terminated event with
the HCI_LE_Connection_Complete event by comparing the connection
handles.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Commit 233149eec5 moved flash sram nodes
under /soc for various nordic ICs, but the indentation isn't right for
52811. Fix it.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
spi1 and i2c0 share peripheral ID number 3.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
UART0, TWI0, and SPI0 have different peripheral IDs (2, 3, and 4
respectively) on this SoC and therefore should not be mutually
exclusive to use.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Fix bug where if `CONFIG_BOOTLOADER_MCUBOOT` is set sign.py incorrectly
shows warning `CONFIG_BOOTLOADER_MCUBOOT is not set to y...`.
Signed-off-by: Arvin Farahmand <arvinf@ip-logix.com>
